#
dd11fdc3 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_USB_FLAGS et al to CFG Perform simple renames of: CONFIG_MXC_USB_FLAGS to CFG_MXC_USB_FLAGS CONFIG_MXC_USB_PORT to CFG_MXC_USB_PORT CONFIG_MXC_USB_PORTSC to CFG_MXC_USB_PORTSC Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
4db38665 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_UART_BASE to CFG Perform a simple rename of CONFIG_MXC_UART_BASE to CFG_MXC_UART_BASE Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0613c36a |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_EXTRA_ENV_SETTINGS to CFG Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
54f80dd2 |
|
02-Dec-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_HOSTNAME et al to Kconfig This converts the following to Kconfig: CONFIG_GATEWAYIP CONFIG_HOSTNAME CONFIG_IPADDR CONFIG_NETMASK CONFIG_ROOTPATH CONFIG_SERVERIP CONFIG_UBOOTPATH To do this, we introduce a CONFIG_USE_ form of each of the above and change include/env_default.h to test for that to be set before setting a value. Further, we don't want to stringify the IP address related values as they are now properly strings via Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aec118eb |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
imx6/imx7: Remove now empty imx6_spl.h and imx7_spl.h There are now no flags being set in these files, so remove them. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
This contributor prefers not to receive mails <noreply@example.com> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
dd11fdc3 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_USB_FLAGS et al to CFG Perform simple renames of: CONFIG_MXC_USB_FLAGS to CFG_MXC_USB_FLAGS CONFIG_MXC_USB_PORT to CFG_MXC_USB_PORT CONFIG_MXC_USB_PORTSC to CFG_MXC_USB_PORTSC Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
4db38665 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_UART_BASE to CFG Perform a simple rename of CONFIG_MXC_UART_BASE to CFG_MXC_UART_BASE Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0613c36a |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_EXTRA_ENV_SETTINGS to CFG Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
54f80dd2 |
|
02-Dec-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_HOSTNAME et al to Kconfig This converts the following to Kconfig: CONFIG_GATEWAYIP CONFIG_HOSTNAME CONFIG_IPADDR CONFIG_NETMASK CONFIG_ROOTPATH CONFIG_SERVERIP CONFIG_UBOOTPATH To do this, we introduce a CONFIG_USE_ form of each of the above and change include/env_default.h to test for that to be set before setting a value. Further, we don't want to stringify the IP address related values as they are now properly strings via Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aec118eb |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
imx6/imx7: Remove now empty imx6_spl.h and imx7_spl.h There are now no flags being set in these files, so remove them. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
This contributor prefers not to receive mails <noreply@example.com> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
dd11fdc3 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_USB_FLAGS et al to CFG Perform simple renames of: CONFIG_MXC_USB_FLAGS to CFG_MXC_USB_FLAGS CONFIG_MXC_USB_PORT to CFG_MXC_USB_PORT CONFIG_MXC_USB_PORTSC to CFG_MXC_USB_PORTSC Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
4db38665 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_UART_BASE to CFG Perform a simple rename of CONFIG_MXC_UART_BASE to CFG_MXC_UART_BASE Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0613c36a |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_EXTRA_ENV_SETTINGS to CFG Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
54f80dd2 |
|
02-Dec-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_HOSTNAME et al to Kconfig This converts the following to Kconfig: CONFIG_GATEWAYIP CONFIG_HOSTNAME CONFIG_IPADDR CONFIG_NETMASK CONFIG_ROOTPATH CONFIG_SERVERIP CONFIG_UBOOTPATH To do this, we introduce a CONFIG_USE_ form of each of the above and change include/env_default.h to test for that to be set before setting a value. Further, we don't want to stringify the IP address related values as they are now properly strings via Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aec118eb |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
imx6/imx7: Remove now empty imx6_spl.h and imx7_spl.h There are now no flags being set in these files, so remove them. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
This contributor prefers not to receive mails <noreply@example.com> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
dd11fdc3 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_USB_FLAGS et al to CFG Perform simple renames of: CONFIG_MXC_USB_FLAGS to CFG_MXC_USB_FLAGS CONFIG_MXC_USB_PORT to CFG_MXC_USB_PORT CONFIG_MXC_USB_PORTSC to CFG_MXC_USB_PORTSC Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
4db38665 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_UART_BASE to CFG Perform a simple rename of CONFIG_MXC_UART_BASE to CFG_MXC_UART_BASE Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0613c36a |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_EXTRA_ENV_SETTINGS to CFG Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
54f80dd2 |
|
02-Dec-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_HOSTNAME et al to Kconfig This converts the following to Kconfig: CONFIG_GATEWAYIP CONFIG_HOSTNAME CONFIG_IPADDR CONFIG_NETMASK CONFIG_ROOTPATH CONFIG_SERVERIP CONFIG_UBOOTPATH To do this, we introduce a CONFIG_USE_ form of each of the above and change include/env_default.h to test for that to be set before setting a value. Further, we don't want to stringify the IP address related values as they are now properly strings via Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aec118eb |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
imx6/imx7: Remove now empty imx6_spl.h and imx7_spl.h There are now no flags being set in these files, so remove them. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
This contributor prefers not to receive mails <noreply@example.com> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
dd11fdc3 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_USB_FLAGS et al to CFG Perform simple renames of: CONFIG_MXC_USB_FLAGS to CFG_MXC_USB_FLAGS CONFIG_MXC_USB_PORT to CFG_MXC_USB_PORT CONFIG_MXC_USB_PORTSC to CFG_MXC_USB_PORTSC Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
4db38665 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_UART_BASE to CFG Perform a simple rename of CONFIG_MXC_UART_BASE to CFG_MXC_UART_BASE Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0613c36a |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_EXTRA_ENV_SETTINGS to CFG Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
54f80dd2 |
|
02-Dec-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_HOSTNAME et al to Kconfig This converts the following to Kconfig: CONFIG_GATEWAYIP CONFIG_HOSTNAME CONFIG_IPADDR CONFIG_NETMASK CONFIG_ROOTPATH CONFIG_SERVERIP CONFIG_UBOOTPATH To do this, we introduce a CONFIG_USE_ form of each of the above and change include/env_default.h to test for that to be set before setting a value. Further, we don't want to stringify the IP address related values as they are now properly strings via Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aec118eb |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
imx6/imx7: Remove now empty imx6_spl.h and imx7_spl.h There are now no flags being set in these files, so remove them. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
This contributor prefers not to receive mails <noreply@example.com> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
dd11fdc3 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_USB_FLAGS et al to CFG Perform simple renames of: CONFIG_MXC_USB_FLAGS to CFG_MXC_USB_FLAGS CONFIG_MXC_USB_PORT to CFG_MXC_USB_PORT CONFIG_MXC_USB_PORTSC to CFG_MXC_USB_PORTSC Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
4db38665 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_UART_BASE to CFG Perform a simple rename of CONFIG_MXC_UART_BASE to CFG_MXC_UART_BASE Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0613c36a |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_EXTRA_ENV_SETTINGS to CFG Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
54f80dd2 |
|
02-Dec-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_HOSTNAME et al to Kconfig This converts the following to Kconfig: CONFIG_GATEWAYIP CONFIG_HOSTNAME CONFIG_IPADDR CONFIG_NETMASK CONFIG_ROOTPATH CONFIG_SERVERIP CONFIG_UBOOTPATH To do this, we introduce a CONFIG_USE_ form of each of the above and change include/env_default.h to test for that to be set before setting a value. Further, we don't want to stringify the IP address related values as they are now properly strings via Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aec118eb |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
imx6/imx7: Remove now empty imx6_spl.h and imx7_spl.h There are now no flags being set in these files, so remove them. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
This contributor prefers not to receive mails <noreply@example.com> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
dd11fdc3 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_USB_FLAGS et al to CFG Perform simple renames of: CONFIG_MXC_USB_FLAGS to CFG_MXC_USB_FLAGS CONFIG_MXC_USB_PORT to CFG_MXC_USB_PORT CONFIG_MXC_USB_PORTSC to CFG_MXC_USB_PORTSC Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
4db38665 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_UART_BASE to CFG Perform a simple rename of CONFIG_MXC_UART_BASE to CFG_MXC_UART_BASE Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0613c36a |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_EXTRA_ENV_SETTINGS to CFG Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
54f80dd2 |
|
02-Dec-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_HOSTNAME et al to Kconfig This converts the following to Kconfig: CONFIG_GATEWAYIP CONFIG_HOSTNAME CONFIG_IPADDR CONFIG_NETMASK CONFIG_ROOTPATH CONFIG_SERVERIP CONFIG_UBOOTPATH To do this, we introduce a CONFIG_USE_ form of each of the above and change include/env_default.h to test for that to be set before setting a value. Further, we don't want to stringify the IP address related values as they are now properly strings via Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aec118eb |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
imx6/imx7: Remove now empty imx6_spl.h and imx7_spl.h There are now no flags being set in these files, so remove them. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
This contributor prefers not to receive mails <noreply@example.com> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
dd11fdc3 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_USB_FLAGS et al to CFG Perform simple renames of: CONFIG_MXC_USB_FLAGS to CFG_MXC_USB_FLAGS CONFIG_MXC_USB_PORT to CFG_MXC_USB_PORT CONFIG_MXC_USB_PORTSC to CFG_MXC_USB_PORTSC Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
4db38665 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_UART_BASE to CFG Perform a simple rename of CONFIG_MXC_UART_BASE to CFG_MXC_UART_BASE Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0613c36a |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_EXTRA_ENV_SETTINGS to CFG Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
54f80dd2 |
|
02-Dec-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_HOSTNAME et al to Kconfig This converts the following to Kconfig: CONFIG_GATEWAYIP CONFIG_HOSTNAME CONFIG_IPADDR CONFIG_NETMASK CONFIG_ROOTPATH CONFIG_SERVERIP CONFIG_UBOOTPATH To do this, we introduce a CONFIG_USE_ form of each of the above and change include/env_default.h to test for that to be set before setting a value. Further, we don't want to stringify the IP address related values as they are now properly strings via Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aec118eb |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
imx6/imx7: Remove now empty imx6_spl.h and imx7_spl.h There are now no flags being set in these files, so remove them. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
This contributor prefers not to receive mails <noreply@example.com> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
dd11fdc3 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_USB_FLAGS et al to CFG Perform simple renames of: CONFIG_MXC_USB_FLAGS to CFG_MXC_USB_FLAGS CONFIG_MXC_USB_PORT to CFG_MXC_USB_PORT CONFIG_MXC_USB_PORTSC to CFG_MXC_USB_PORTSC Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
4db38665 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_UART_BASE to CFG Perform a simple rename of CONFIG_MXC_UART_BASE to CFG_MXC_UART_BASE Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0613c36a |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_EXTRA_ENV_SETTINGS to CFG Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
54f80dd2 |
|
02-Dec-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_HOSTNAME et al to Kconfig This converts the following to Kconfig: CONFIG_GATEWAYIP CONFIG_HOSTNAME CONFIG_IPADDR CONFIG_NETMASK CONFIG_ROOTPATH CONFIG_SERVERIP CONFIG_UBOOTPATH To do this, we introduce a CONFIG_USE_ form of each of the above and change include/env_default.h to test for that to be set before setting a value. Further, we don't want to stringify the IP address related values as they are now properly strings via Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aec118eb |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
imx6/imx7: Remove now empty imx6_spl.h and imx7_spl.h There are now no flags being set in these files, so remove them. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
This contributor prefers not to receive mails <noreply@example.com> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
dd11fdc3 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_USB_FLAGS et al to CFG Perform simple renames of: CONFIG_MXC_USB_FLAGS to CFG_MXC_USB_FLAGS CONFIG_MXC_USB_PORT to CFG_MXC_USB_PORT CONFIG_MXC_USB_PORTSC to CFG_MXC_USB_PORTSC Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
4db38665 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_UART_BASE to CFG Perform a simple rename of CONFIG_MXC_UART_BASE to CFG_MXC_UART_BASE Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0613c36a |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_EXTRA_ENV_SETTINGS to CFG Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
54f80dd2 |
|
02-Dec-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_HOSTNAME et al to Kconfig This converts the following to Kconfig: CONFIG_GATEWAYIP CONFIG_HOSTNAME CONFIG_IPADDR CONFIG_NETMASK CONFIG_ROOTPATH CONFIG_SERVERIP CONFIG_UBOOTPATH To do this, we introduce a CONFIG_USE_ form of each of the above and change include/env_default.h to test for that to be set before setting a value. Further, we don't want to stringify the IP address related values as they are now properly strings via Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aec118eb |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
imx6/imx7: Remove now empty imx6_spl.h and imx7_spl.h There are now no flags being set in these files, so remove them. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
This contributor prefers not to receive mails <noreply@example.com> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
dd11fdc3 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_USB_FLAGS et al to CFG Perform simple renames of: CONFIG_MXC_USB_FLAGS to CFG_MXC_USB_FLAGS CONFIG_MXC_USB_PORT to CFG_MXC_USB_PORT CONFIG_MXC_USB_PORTSC to CFG_MXC_USB_PORTSC Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
4db38665 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_UART_BASE to CFG Perform a simple rename of CONFIG_MXC_UART_BASE to CFG_MXC_UART_BASE Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0613c36a |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_EXTRA_ENV_SETTINGS to CFG Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
54f80dd2 |
|
02-Dec-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_HOSTNAME et al to Kconfig This converts the following to Kconfig: CONFIG_GATEWAYIP CONFIG_HOSTNAME CONFIG_IPADDR CONFIG_NETMASK CONFIG_ROOTPATH CONFIG_SERVERIP CONFIG_UBOOTPATH To do this, we introduce a CONFIG_USE_ form of each of the above and change include/env_default.h to test for that to be set before setting a value. Further, we don't want to stringify the IP address related values as they are now properly strings via Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aec118eb |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
imx6/imx7: Remove now empty imx6_spl.h and imx7_spl.h There are now no flags being set in these files, so remove them. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
This contributor prefers not to receive mails <noreply@example.com> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
dd11fdc3 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_USB_FLAGS et al to CFG Perform simple renames of: CONFIG_MXC_USB_FLAGS to CFG_MXC_USB_FLAGS CONFIG_MXC_USB_PORT to CFG_MXC_USB_PORT CONFIG_MXC_USB_PORTSC to CFG_MXC_USB_PORTSC Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
4db38665 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_UART_BASE to CFG Perform a simple rename of CONFIG_MXC_UART_BASE to CFG_MXC_UART_BASE Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0613c36a |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_EXTRA_ENV_SETTINGS to CFG Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
54f80dd2 |
|
02-Dec-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_HOSTNAME et al to Kconfig This converts the following to Kconfig: CONFIG_GATEWAYIP CONFIG_HOSTNAME CONFIG_IPADDR CONFIG_NETMASK CONFIG_ROOTPATH CONFIG_SERVERIP CONFIG_UBOOTPATH To do this, we introduce a CONFIG_USE_ form of each of the above and change include/env_default.h to test for that to be set before setting a value. Further, we don't want to stringify the IP address related values as they are now properly strings via Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aec118eb |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
imx6/imx7: Remove now empty imx6_spl.h and imx7_spl.h There are now no flags being set in these files, so remove them. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
This contributor prefers not to receive mails <noreply@example.com> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
dd11fdc3 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_USB_FLAGS et al to CFG Perform simple renames of: CONFIG_MXC_USB_FLAGS to CFG_MXC_USB_FLAGS CONFIG_MXC_USB_PORT to CFG_MXC_USB_PORT CONFIG_MXC_USB_PORTSC to CFG_MXC_USB_PORTSC Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
4db38665 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_UART_BASE to CFG Perform a simple rename of CONFIG_MXC_UART_BASE to CFG_MXC_UART_BASE Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0613c36a |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_EXTRA_ENV_SETTINGS to CFG Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
54f80dd2 |
|
02-Dec-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_HOSTNAME et al to Kconfig This converts the following to Kconfig: CONFIG_GATEWAYIP CONFIG_HOSTNAME CONFIG_IPADDR CONFIG_NETMASK CONFIG_ROOTPATH CONFIG_SERVERIP CONFIG_UBOOTPATH To do this, we introduce a CONFIG_USE_ form of each of the above and change include/env_default.h to test for that to be set before setting a value. Further, we don't want to stringify the IP address related values as they are now properly strings via Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aec118eb |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
imx6/imx7: Remove now empty imx6_spl.h and imx7_spl.h There are now no flags being set in these files, so remove them. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
This contributor prefers not to receive mails <noreply@example.com> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
dd11fdc3 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_USB_FLAGS et al to CFG Perform simple renames of: CONFIG_MXC_USB_FLAGS to CFG_MXC_USB_FLAGS CONFIG_MXC_USB_PORT to CFG_MXC_USB_PORT CONFIG_MXC_USB_PORTSC to CFG_MXC_USB_PORTSC Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
4db38665 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_UART_BASE to CFG Perform a simple rename of CONFIG_MXC_UART_BASE to CFG_MXC_UART_BASE Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0613c36a |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_EXTRA_ENV_SETTINGS to CFG Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
54f80dd2 |
|
02-Dec-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_HOSTNAME et al to Kconfig This converts the following to Kconfig: CONFIG_GATEWAYIP CONFIG_HOSTNAME CONFIG_IPADDR CONFIG_NETMASK CONFIG_ROOTPATH CONFIG_SERVERIP CONFIG_UBOOTPATH To do this, we introduce a CONFIG_USE_ form of each of the above and change include/env_default.h to test for that to be set before setting a value. Further, we don't want to stringify the IP address related values as they are now properly strings via Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aec118eb |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
imx6/imx7: Remove now empty imx6_spl.h and imx7_spl.h There are now no flags being set in these files, so remove them. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
This contributor prefers not to receive mails <noreply@example.com> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
dd11fdc3 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_USB_FLAGS et al to CFG Perform simple renames of: CONFIG_MXC_USB_FLAGS to CFG_MXC_USB_FLAGS CONFIG_MXC_USB_PORT to CFG_MXC_USB_PORT CONFIG_MXC_USB_PORTSC to CFG_MXC_USB_PORTSC Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
4db38665 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_UART_BASE to CFG Perform a simple rename of CONFIG_MXC_UART_BASE to CFG_MXC_UART_BASE Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0613c36a |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_EXTRA_ENV_SETTINGS to CFG Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
54f80dd2 |
|
02-Dec-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_HOSTNAME et al to Kconfig This converts the following to Kconfig: CONFIG_GATEWAYIP CONFIG_HOSTNAME CONFIG_IPADDR CONFIG_NETMASK CONFIG_ROOTPATH CONFIG_SERVERIP CONFIG_UBOOTPATH To do this, we introduce a CONFIG_USE_ form of each of the above and change include/env_default.h to test for that to be set before setting a value. Further, we don't want to stringify the IP address related values as they are now properly strings via Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aec118eb |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
imx6/imx7: Remove now empty imx6_spl.h and imx7_spl.h There are now no flags being set in these files, so remove them. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
This contributor prefers not to receive mails <noreply@example.com> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
dd11fdc3 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_USB_FLAGS et al to CFG Perform simple renames of: CONFIG_MXC_USB_FLAGS to CFG_MXC_USB_FLAGS CONFIG_MXC_USB_PORT to CFG_MXC_USB_PORT CONFIG_MXC_USB_PORTSC to CFG_MXC_USB_PORTSC Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
4db38665 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_UART_BASE to CFG Perform a simple rename of CONFIG_MXC_UART_BASE to CFG_MXC_UART_BASE Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0613c36a |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_EXTRA_ENV_SETTINGS to CFG Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
54f80dd2 |
|
02-Dec-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_HOSTNAME et al to Kconfig This converts the following to Kconfig: CONFIG_GATEWAYIP CONFIG_HOSTNAME CONFIG_IPADDR CONFIG_NETMASK CONFIG_ROOTPATH CONFIG_SERVERIP CONFIG_UBOOTPATH To do this, we introduce a CONFIG_USE_ form of each of the above and change include/env_default.h to test for that to be set before setting a value. Further, we don't want to stringify the IP address related values as they are now properly strings via Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aec118eb |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
imx6/imx7: Remove now empty imx6_spl.h and imx7_spl.h There are now no flags being set in these files, so remove them. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
This contributor prefers not to receive mails <noreply@example.com> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
dd11fdc3 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_USB_FLAGS et al to CFG Perform simple renames of: CONFIG_MXC_USB_FLAGS to CFG_MXC_USB_FLAGS CONFIG_MXC_USB_PORT to CFG_MXC_USB_PORT CONFIG_MXC_USB_PORTSC to CFG_MXC_USB_PORTSC Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
4db38665 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_UART_BASE to CFG Perform a simple rename of CONFIG_MXC_UART_BASE to CFG_MXC_UART_BASE Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0613c36a |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_EXTRA_ENV_SETTINGS to CFG Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
54f80dd2 |
|
02-Dec-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_HOSTNAME et al to Kconfig This converts the following to Kconfig: CONFIG_GATEWAYIP CONFIG_HOSTNAME CONFIG_IPADDR CONFIG_NETMASK CONFIG_ROOTPATH CONFIG_SERVERIP CONFIG_UBOOTPATH To do this, we introduce a CONFIG_USE_ form of each of the above and change include/env_default.h to test for that to be set before setting a value. Further, we don't want to stringify the IP address related values as they are now properly strings via Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aec118eb |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
imx6/imx7: Remove now empty imx6_spl.h and imx7_spl.h There are now no flags being set in these files, so remove them. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
This contributor prefers not to receive mails <noreply@example.com> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
dd11fdc3 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_USB_FLAGS et al to CFG Perform simple renames of: CONFIG_MXC_USB_FLAGS to CFG_MXC_USB_FLAGS CONFIG_MXC_USB_PORT to CFG_MXC_USB_PORT CONFIG_MXC_USB_PORTSC to CFG_MXC_USB_PORTSC Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
4db38665 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_UART_BASE to CFG Perform a simple rename of CONFIG_MXC_UART_BASE to CFG_MXC_UART_BASE Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0613c36a |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_EXTRA_ENV_SETTINGS to CFG Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
54f80dd2 |
|
02-Dec-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_HOSTNAME et al to Kconfig This converts the following to Kconfig: CONFIG_GATEWAYIP CONFIG_HOSTNAME CONFIG_IPADDR CONFIG_NETMASK CONFIG_ROOTPATH CONFIG_SERVERIP CONFIG_UBOOTPATH To do this, we introduce a CONFIG_USE_ form of each of the above and change include/env_default.h to test for that to be set before setting a value. Further, we don't want to stringify the IP address related values as they are now properly strings via Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aec118eb |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
imx6/imx7: Remove now empty imx6_spl.h and imx7_spl.h There are now no flags being set in these files, so remove them. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
This contributor prefers not to receive mails <noreply@example.com> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
dd11fdc3 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_USB_FLAGS et al to CFG Perform simple renames of: CONFIG_MXC_USB_FLAGS to CFG_MXC_USB_FLAGS CONFIG_MXC_USB_PORT to CFG_MXC_USB_PORT CONFIG_MXC_USB_PORTSC to CFG_MXC_USB_PORTSC Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
4db38665 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_UART_BASE to CFG Perform a simple rename of CONFIG_MXC_UART_BASE to CFG_MXC_UART_BASE Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0613c36a |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_EXTRA_ENV_SETTINGS to CFG Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
54f80dd2 |
|
02-Dec-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_HOSTNAME et al to Kconfig This converts the following to Kconfig: CONFIG_GATEWAYIP CONFIG_HOSTNAME CONFIG_IPADDR CONFIG_NETMASK CONFIG_ROOTPATH CONFIG_SERVERIP CONFIG_UBOOTPATH To do this, we introduce a CONFIG_USE_ form of each of the above and change include/env_default.h to test for that to be set before setting a value. Further, we don't want to stringify the IP address related values as they are now properly strings via Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aec118eb |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
imx6/imx7: Remove now empty imx6_spl.h and imx7_spl.h There are now no flags being set in these files, so remove them. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
This contributor prefers not to receive mails <noreply@example.com> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
dd11fdc3 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_USB_FLAGS et al to CFG Perform simple renames of: CONFIG_MXC_USB_FLAGS to CFG_MXC_USB_FLAGS CONFIG_MXC_USB_PORT to CFG_MXC_USB_PORT CONFIG_MXC_USB_PORTSC to CFG_MXC_USB_PORTSC Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
4db38665 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_UART_BASE to CFG Perform a simple rename of CONFIG_MXC_UART_BASE to CFG_MXC_UART_BASE Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0613c36a |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_EXTRA_ENV_SETTINGS to CFG Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
54f80dd2 |
|
02-Dec-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_HOSTNAME et al to Kconfig This converts the following to Kconfig: CONFIG_GATEWAYIP CONFIG_HOSTNAME CONFIG_IPADDR CONFIG_NETMASK CONFIG_ROOTPATH CONFIG_SERVERIP CONFIG_UBOOTPATH To do this, we introduce a CONFIG_USE_ form of each of the above and change include/env_default.h to test for that to be set before setting a value. Further, we don't want to stringify the IP address related values as they are now properly strings via Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aec118eb |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
imx6/imx7: Remove now empty imx6_spl.h and imx7_spl.h There are now no flags being set in these files, so remove them. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
This contributor prefers not to receive mails <noreply@example.com> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
dd11fdc3 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_USB_FLAGS et al to CFG Perform simple renames of: CONFIG_MXC_USB_FLAGS to CFG_MXC_USB_FLAGS CONFIG_MXC_USB_PORT to CFG_MXC_USB_PORT CONFIG_MXC_USB_PORTSC to CFG_MXC_USB_PORTSC Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
4db38665 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_UART_BASE to CFG Perform a simple rename of CONFIG_MXC_UART_BASE to CFG_MXC_UART_BASE Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0613c36a |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_EXTRA_ENV_SETTINGS to CFG Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
54f80dd2 |
|
02-Dec-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_HOSTNAME et al to Kconfig This converts the following to Kconfig: CONFIG_GATEWAYIP CONFIG_HOSTNAME CONFIG_IPADDR CONFIG_NETMASK CONFIG_ROOTPATH CONFIG_SERVERIP CONFIG_UBOOTPATH To do this, we introduce a CONFIG_USE_ form of each of the above and change include/env_default.h to test for that to be set before setting a value. Further, we don't want to stringify the IP address related values as they are now properly strings via Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aec118eb |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
imx6/imx7: Remove now empty imx6_spl.h and imx7_spl.h There are now no flags being set in these files, so remove them. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
This contributor prefers not to receive mails <noreply@example.com> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
dd11fdc3 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_USB_FLAGS et al to CFG Perform simple renames of: CONFIG_MXC_USB_FLAGS to CFG_MXC_USB_FLAGS CONFIG_MXC_USB_PORT to CFG_MXC_USB_PORT CONFIG_MXC_USB_PORTSC to CFG_MXC_USB_PORTSC Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
4db38665 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_UART_BASE to CFG Perform a simple rename of CONFIG_MXC_UART_BASE to CFG_MXC_UART_BASE Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0613c36a |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_EXTRA_ENV_SETTINGS to CFG Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
54f80dd2 |
|
02-Dec-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_HOSTNAME et al to Kconfig This converts the following to Kconfig: CONFIG_GATEWAYIP CONFIG_HOSTNAME CONFIG_IPADDR CONFIG_NETMASK CONFIG_ROOTPATH CONFIG_SERVERIP CONFIG_UBOOTPATH To do this, we introduce a CONFIG_USE_ form of each of the above and change include/env_default.h to test for that to be set before setting a value. Further, we don't want to stringify the IP address related values as they are now properly strings via Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aec118eb |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
imx6/imx7: Remove now empty imx6_spl.h and imx7_spl.h There are now no flags being set in these files, so remove them. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
This contributor prefers not to receive mails <noreply@example.com> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
dd11fdc3 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_USB_FLAGS et al to CFG Perform simple renames of: CONFIG_MXC_USB_FLAGS to CFG_MXC_USB_FLAGS CONFIG_MXC_USB_PORT to CFG_MXC_USB_PORT CONFIG_MXC_USB_PORTSC to CFG_MXC_USB_PORTSC Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
4db38665 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_UART_BASE to CFG Perform a simple rename of CONFIG_MXC_UART_BASE to CFG_MXC_UART_BASE Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0613c36a |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_EXTRA_ENV_SETTINGS to CFG Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
54f80dd2 |
|
02-Dec-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_HOSTNAME et al to Kconfig This converts the following to Kconfig: CONFIG_GATEWAYIP CONFIG_HOSTNAME CONFIG_IPADDR CONFIG_NETMASK CONFIG_ROOTPATH CONFIG_SERVERIP CONFIG_UBOOTPATH To do this, we introduce a CONFIG_USE_ form of each of the above and change include/env_default.h to test for that to be set before setting a value. Further, we don't want to stringify the IP address related values as they are now properly strings via Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aec118eb |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
imx6/imx7: Remove now empty imx6_spl.h and imx7_spl.h There are now no flags being set in these files, so remove them. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
This contributor prefers not to receive mails <noreply@example.com> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
dd11fdc3 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_USB_FLAGS et al to CFG Perform simple renames of: CONFIG_MXC_USB_FLAGS to CFG_MXC_USB_FLAGS CONFIG_MXC_USB_PORT to CFG_MXC_USB_PORT CONFIG_MXC_USB_PORTSC to CFG_MXC_USB_PORTSC Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
4db38665 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_UART_BASE to CFG Perform a simple rename of CONFIG_MXC_UART_BASE to CFG_MXC_UART_BASE Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0613c36a |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_EXTRA_ENV_SETTINGS to CFG Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
54f80dd2 |
|
02-Dec-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_HOSTNAME et al to Kconfig This converts the following to Kconfig: CONFIG_GATEWAYIP CONFIG_HOSTNAME CONFIG_IPADDR CONFIG_NETMASK CONFIG_ROOTPATH CONFIG_SERVERIP CONFIG_UBOOTPATH To do this, we introduce a CONFIG_USE_ form of each of the above and change include/env_default.h to test for that to be set before setting a value. Further, we don't want to stringify the IP address related values as they are now properly strings via Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aec118eb |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
imx6/imx7: Remove now empty imx6_spl.h and imx7_spl.h There are now no flags being set in these files, so remove them. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
This contributor prefers not to receive mails <noreply@example.com> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
dd11fdc3 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_USB_FLAGS et al to CFG Perform simple renames of: CONFIG_MXC_USB_FLAGS to CFG_MXC_USB_FLAGS CONFIG_MXC_USB_PORT to CFG_MXC_USB_PORT CONFIG_MXC_USB_PORTSC to CFG_MXC_USB_PORTSC Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
4db38665 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_UART_BASE to CFG Perform a simple rename of CONFIG_MXC_UART_BASE to CFG_MXC_UART_BASE Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0613c36a |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_EXTRA_ENV_SETTINGS to CFG Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
54f80dd2 |
|
02-Dec-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_HOSTNAME et al to Kconfig This converts the following to Kconfig: CONFIG_GATEWAYIP CONFIG_HOSTNAME CONFIG_IPADDR CONFIG_NETMASK CONFIG_ROOTPATH CONFIG_SERVERIP CONFIG_UBOOTPATH To do this, we introduce a CONFIG_USE_ form of each of the above and change include/env_default.h to test for that to be set before setting a value. Further, we don't want to stringify the IP address related values as they are now properly strings via Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aec118eb |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
imx6/imx7: Remove now empty imx6_spl.h and imx7_spl.h There are now no flags being set in these files, so remove them. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
This contributor prefers not to receive mails <noreply@example.com> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
dd11fdc3 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_USB_FLAGS et al to CFG Perform simple renames of: CONFIG_MXC_USB_FLAGS to CFG_MXC_USB_FLAGS CONFIG_MXC_USB_PORT to CFG_MXC_USB_PORT CONFIG_MXC_USB_PORTSC to CFG_MXC_USB_PORTSC Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
4db38665 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_UART_BASE to CFG Perform a simple rename of CONFIG_MXC_UART_BASE to CFG_MXC_UART_BASE Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0613c36a |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_EXTRA_ENV_SETTINGS to CFG Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
54f80dd2 |
|
02-Dec-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_HOSTNAME et al to Kconfig This converts the following to Kconfig: CONFIG_GATEWAYIP CONFIG_HOSTNAME CONFIG_IPADDR CONFIG_NETMASK CONFIG_ROOTPATH CONFIG_SERVERIP CONFIG_UBOOTPATH To do this, we introduce a CONFIG_USE_ form of each of the above and change include/env_default.h to test for that to be set before setting a value. Further, we don't want to stringify the IP address related values as they are now properly strings via Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aec118eb |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
imx6/imx7: Remove now empty imx6_spl.h and imx7_spl.h There are now no flags being set in these files, so remove them. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
This contributor prefers not to receive mails <noreply@example.com> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
dd11fdc3 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_USB_FLAGS et al to CFG Perform simple renames of: CONFIG_MXC_USB_FLAGS to CFG_MXC_USB_FLAGS CONFIG_MXC_USB_PORT to CFG_MXC_USB_PORT CONFIG_MXC_USB_PORTSC to CFG_MXC_USB_PORTSC Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
4db38665 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_UART_BASE to CFG Perform a simple rename of CONFIG_MXC_UART_BASE to CFG_MXC_UART_BASE Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0613c36a |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_EXTRA_ENV_SETTINGS to CFG Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
54f80dd2 |
|
02-Dec-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_HOSTNAME et al to Kconfig This converts the following to Kconfig: CONFIG_GATEWAYIP CONFIG_HOSTNAME CONFIG_IPADDR CONFIG_NETMASK CONFIG_ROOTPATH CONFIG_SERVERIP CONFIG_UBOOTPATH To do this, we introduce a CONFIG_USE_ form of each of the above and change include/env_default.h to test for that to be set before setting a value. Further, we don't want to stringify the IP address related values as they are now properly strings via Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aec118eb |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
imx6/imx7: Remove now empty imx6_spl.h and imx7_spl.h There are now no flags being set in these files, so remove them. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
This contributor prefers not to receive mails <noreply@example.com> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
dd11fdc3 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_USB_FLAGS et al to CFG Perform simple renames of: CONFIG_MXC_USB_FLAGS to CFG_MXC_USB_FLAGS CONFIG_MXC_USB_PORT to CFG_MXC_USB_PORT CONFIG_MXC_USB_PORTSC to CFG_MXC_USB_PORTSC Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
4db38665 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_UART_BASE to CFG Perform a simple rename of CONFIG_MXC_UART_BASE to CFG_MXC_UART_BASE Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0613c36a |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_EXTRA_ENV_SETTINGS to CFG Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
54f80dd2 |
|
02-Dec-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_HOSTNAME et al to Kconfig This converts the following to Kconfig: CONFIG_GATEWAYIP CONFIG_HOSTNAME CONFIG_IPADDR CONFIG_NETMASK CONFIG_ROOTPATH CONFIG_SERVERIP CONFIG_UBOOTPATH To do this, we introduce a CONFIG_USE_ form of each of the above and change include/env_default.h to test for that to be set before setting a value. Further, we don't want to stringify the IP address related values as they are now properly strings via Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aec118eb |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
imx6/imx7: Remove now empty imx6_spl.h and imx7_spl.h There are now no flags being set in these files, so remove them. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
This contributor prefers not to receive mails <noreply@example.com> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
dd11fdc3 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_USB_FLAGS et al to CFG Perform simple renames of: CONFIG_MXC_USB_FLAGS to CFG_MXC_USB_FLAGS CONFIG_MXC_USB_PORT to CFG_MXC_USB_PORT CONFIG_MXC_USB_PORTSC to CFG_MXC_USB_PORTSC Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
4db38665 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_UART_BASE to CFG Perform a simple rename of CONFIG_MXC_UART_BASE to CFG_MXC_UART_BASE Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0613c36a |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_EXTRA_ENV_SETTINGS to CFG Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
54f80dd2 |
|
02-Dec-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_HOSTNAME et al to Kconfig This converts the following to Kconfig: CONFIG_GATEWAYIP CONFIG_HOSTNAME CONFIG_IPADDR CONFIG_NETMASK CONFIG_ROOTPATH CONFIG_SERVERIP CONFIG_UBOOTPATH To do this, we introduce a CONFIG_USE_ form of each of the above and change include/env_default.h to test for that to be set before setting a value. Further, we don't want to stringify the IP address related values as they are now properly strings via Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aec118eb |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
imx6/imx7: Remove now empty imx6_spl.h and imx7_spl.h There are now no flags being set in these files, so remove them. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
This contributor prefers not to receive mails <noreply@example.com> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
dd11fdc3 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_USB_FLAGS et al to CFG Perform simple renames of: CONFIG_MXC_USB_FLAGS to CFG_MXC_USB_FLAGS CONFIG_MXC_USB_PORT to CFG_MXC_USB_PORT CONFIG_MXC_USB_PORTSC to CFG_MXC_USB_PORTSC Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
4db38665 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_UART_BASE to CFG Perform a simple rename of CONFIG_MXC_UART_BASE to CFG_MXC_UART_BASE Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0613c36a |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_EXTRA_ENV_SETTINGS to CFG Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
54f80dd2 |
|
02-Dec-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_HOSTNAME et al to Kconfig This converts the following to Kconfig: CONFIG_GATEWAYIP CONFIG_HOSTNAME CONFIG_IPADDR CONFIG_NETMASK CONFIG_ROOTPATH CONFIG_SERVERIP CONFIG_UBOOTPATH To do this, we introduce a CONFIG_USE_ form of each of the above and change include/env_default.h to test for that to be set before setting a value. Further, we don't want to stringify the IP address related values as they are now properly strings via Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aec118eb |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
imx6/imx7: Remove now empty imx6_spl.h and imx7_spl.h There are now no flags being set in these files, so remove them. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
This contributor prefers not to receive mails <noreply@example.com> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
dd11fdc3 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_USB_FLAGS et al to CFG Perform simple renames of: CONFIG_MXC_USB_FLAGS to CFG_MXC_USB_FLAGS CONFIG_MXC_USB_PORT to CFG_MXC_USB_PORT CONFIG_MXC_USB_PORTSC to CFG_MXC_USB_PORTSC Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
4db38665 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_UART_BASE to CFG Perform a simple rename of CONFIG_MXC_UART_BASE to CFG_MXC_UART_BASE Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0613c36a |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_EXTRA_ENV_SETTINGS to CFG Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
54f80dd2 |
|
02-Dec-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_HOSTNAME et al to Kconfig This converts the following to Kconfig: CONFIG_GATEWAYIP CONFIG_HOSTNAME CONFIG_IPADDR CONFIG_NETMASK CONFIG_ROOTPATH CONFIG_SERVERIP CONFIG_UBOOTPATH To do this, we introduce a CONFIG_USE_ form of each of the above and change include/env_default.h to test for that to be set before setting a value. Further, we don't want to stringify the IP address related values as they are now properly strings via Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aec118eb |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
imx6/imx7: Remove now empty imx6_spl.h and imx7_spl.h There are now no flags being set in these files, so remove them. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
This contributor prefers not to receive mails <noreply@example.com> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
dd11fdc3 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_USB_FLAGS et al to CFG Perform simple renames of: CONFIG_MXC_USB_FLAGS to CFG_MXC_USB_FLAGS CONFIG_MXC_USB_PORT to CFG_MXC_USB_PORT CONFIG_MXC_USB_PORTSC to CFG_MXC_USB_PORTSC Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
4db38665 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_UART_BASE to CFG Perform a simple rename of CONFIG_MXC_UART_BASE to CFG_MXC_UART_BASE Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0613c36a |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_EXTRA_ENV_SETTINGS to CFG Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
54f80dd2 |
|
02-Dec-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_HOSTNAME et al to Kconfig This converts the following to Kconfig: CONFIG_GATEWAYIP CONFIG_HOSTNAME CONFIG_IPADDR CONFIG_NETMASK CONFIG_ROOTPATH CONFIG_SERVERIP CONFIG_UBOOTPATH To do this, we introduce a CONFIG_USE_ form of each of the above and change include/env_default.h to test for that to be set before setting a value. Further, we don't want to stringify the IP address related values as they are now properly strings via Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aec118eb |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
imx6/imx7: Remove now empty imx6_spl.h and imx7_spl.h There are now no flags being set in these files, so remove them. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
This contributor prefers not to receive mails <noreply@example.com> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
dd11fdc3 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_USB_FLAGS et al to CFG Perform simple renames of: CONFIG_MXC_USB_FLAGS to CFG_MXC_USB_FLAGS CONFIG_MXC_USB_PORT to CFG_MXC_USB_PORT CONFIG_MXC_USB_PORTSC to CFG_MXC_USB_PORTSC Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
4db38665 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_UART_BASE to CFG Perform a simple rename of CONFIG_MXC_UART_BASE to CFG_MXC_UART_BASE Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0613c36a |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_EXTRA_ENV_SETTINGS to CFG Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
54f80dd2 |
|
02-Dec-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_HOSTNAME et al to Kconfig This converts the following to Kconfig: CONFIG_GATEWAYIP CONFIG_HOSTNAME CONFIG_IPADDR CONFIG_NETMASK CONFIG_ROOTPATH CONFIG_SERVERIP CONFIG_UBOOTPATH To do this, we introduce a CONFIG_USE_ form of each of the above and change include/env_default.h to test for that to be set before setting a value. Further, we don't want to stringify the IP address related values as they are now properly strings via Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aec118eb |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
imx6/imx7: Remove now empty imx6_spl.h and imx7_spl.h There are now no flags being set in these files, so remove them. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
This contributor prefers not to receive mails <noreply@example.com> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
dd11fdc3 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_USB_FLAGS et al to CFG Perform simple renames of: CONFIG_MXC_USB_FLAGS to CFG_MXC_USB_FLAGS CONFIG_MXC_USB_PORT to CFG_MXC_USB_PORT CONFIG_MXC_USB_PORTSC to CFG_MXC_USB_PORTSC Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
4db38665 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_UART_BASE to CFG Perform a simple rename of CONFIG_MXC_UART_BASE to CFG_MXC_UART_BASE Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0613c36a |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_EXTRA_ENV_SETTINGS to CFG Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
54f80dd2 |
|
02-Dec-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_HOSTNAME et al to Kconfig This converts the following to Kconfig: CONFIG_GATEWAYIP CONFIG_HOSTNAME CONFIG_IPADDR CONFIG_NETMASK CONFIG_ROOTPATH CONFIG_SERVERIP CONFIG_UBOOTPATH To do this, we introduce a CONFIG_USE_ form of each of the above and change include/env_default.h to test for that to be set before setting a value. Further, we don't want to stringify the IP address related values as they are now properly strings via Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aec118eb |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
imx6/imx7: Remove now empty imx6_spl.h and imx7_spl.h There are now no flags being set in these files, so remove them. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
This contributor prefers not to receive mails <noreply@example.com> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
dd11fdc3 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_USB_FLAGS et al to CFG Perform simple renames of: CONFIG_MXC_USB_FLAGS to CFG_MXC_USB_FLAGS CONFIG_MXC_USB_PORT to CFG_MXC_USB_PORT CONFIG_MXC_USB_PORTSC to CFG_MXC_USB_PORTSC Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
4db38665 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_UART_BASE to CFG Perform a simple rename of CONFIG_MXC_UART_BASE to CFG_MXC_UART_BASE Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0613c36a |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_EXTRA_ENV_SETTINGS to CFG Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
54f80dd2 |
|
02-Dec-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_HOSTNAME et al to Kconfig This converts the following to Kconfig: CONFIG_GATEWAYIP CONFIG_HOSTNAME CONFIG_IPADDR CONFIG_NETMASK CONFIG_ROOTPATH CONFIG_SERVERIP CONFIG_UBOOTPATH To do this, we introduce a CONFIG_USE_ form of each of the above and change include/env_default.h to test for that to be set before setting a value. Further, we don't want to stringify the IP address related values as they are now properly strings via Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aec118eb |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
imx6/imx7: Remove now empty imx6_spl.h and imx7_spl.h There are now no flags being set in these files, so remove them. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
This contributor prefers not to receive mails <noreply@example.com> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
dd11fdc3 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_USB_FLAGS et al to CFG Perform simple renames of: CONFIG_MXC_USB_FLAGS to CFG_MXC_USB_FLAGS CONFIG_MXC_USB_PORT to CFG_MXC_USB_PORT CONFIG_MXC_USB_PORTSC to CFG_MXC_USB_PORTSC Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
4db38665 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_UART_BASE to CFG Perform a simple rename of CONFIG_MXC_UART_BASE to CFG_MXC_UART_BASE Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0613c36a |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_EXTRA_ENV_SETTINGS to CFG Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
54f80dd2 |
|
02-Dec-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_HOSTNAME et al to Kconfig This converts the following to Kconfig: CONFIG_GATEWAYIP CONFIG_HOSTNAME CONFIG_IPADDR CONFIG_NETMASK CONFIG_ROOTPATH CONFIG_SERVERIP CONFIG_UBOOTPATH To do this, we introduce a CONFIG_USE_ form of each of the above and change include/env_default.h to test for that to be set before setting a value. Further, we don't want to stringify the IP address related values as they are now properly strings via Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aec118eb |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
imx6/imx7: Remove now empty imx6_spl.h and imx7_spl.h There are now no flags being set in these files, so remove them. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
This contributor prefers not to receive mails <noreply@example.com> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
dd11fdc3 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_USB_FLAGS et al to CFG Perform simple renames of: CONFIG_MXC_USB_FLAGS to CFG_MXC_USB_FLAGS CONFIG_MXC_USB_PORT to CFG_MXC_USB_PORT CONFIG_MXC_USB_PORTSC to CFG_MXC_USB_PORTSC Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
4db38665 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_UART_BASE to CFG Perform a simple rename of CONFIG_MXC_UART_BASE to CFG_MXC_UART_BASE Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0613c36a |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_EXTRA_ENV_SETTINGS to CFG Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
54f80dd2 |
|
02-Dec-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_HOSTNAME et al to Kconfig This converts the following to Kconfig: CONFIG_GATEWAYIP CONFIG_HOSTNAME CONFIG_IPADDR CONFIG_NETMASK CONFIG_ROOTPATH CONFIG_SERVERIP CONFIG_UBOOTPATH To do this, we introduce a CONFIG_USE_ form of each of the above and change include/env_default.h to test for that to be set before setting a value. Further, we don't want to stringify the IP address related values as they are now properly strings via Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aec118eb |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
imx6/imx7: Remove now empty imx6_spl.h and imx7_spl.h There are now no flags being set in these files, so remove them. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
This contributor prefers not to receive mails <noreply@example.com> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
dd11fdc3 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_USB_FLAGS et al to CFG Perform simple renames of: CONFIG_MXC_USB_FLAGS to CFG_MXC_USB_FLAGS CONFIG_MXC_USB_PORT to CFG_MXC_USB_PORT CONFIG_MXC_USB_PORTSC to CFG_MXC_USB_PORTSC Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
4db38665 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_UART_BASE to CFG Perform a simple rename of CONFIG_MXC_UART_BASE to CFG_MXC_UART_BASE Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0613c36a |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_EXTRA_ENV_SETTINGS to CFG Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
54f80dd2 |
|
02-Dec-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_HOSTNAME et al to Kconfig This converts the following to Kconfig: CONFIG_GATEWAYIP CONFIG_HOSTNAME CONFIG_IPADDR CONFIG_NETMASK CONFIG_ROOTPATH CONFIG_SERVERIP CONFIG_UBOOTPATH To do this, we introduce a CONFIG_USE_ form of each of the above and change include/env_default.h to test for that to be set before setting a value. Further, we don't want to stringify the IP address related values as they are now properly strings via Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aec118eb |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
imx6/imx7: Remove now empty imx6_spl.h and imx7_spl.h There are now no flags being set in these files, so remove them. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
This contributor prefers not to receive mails <noreply@example.com> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
dd11fdc3 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_USB_FLAGS et al to CFG Perform simple renames of: CONFIG_MXC_USB_FLAGS to CFG_MXC_USB_FLAGS CONFIG_MXC_USB_PORT to CFG_MXC_USB_PORT CONFIG_MXC_USB_PORTSC to CFG_MXC_USB_PORTSC Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
4db38665 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_UART_BASE to CFG Perform a simple rename of CONFIG_MXC_UART_BASE to CFG_MXC_UART_BASE Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0613c36a |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_EXTRA_ENV_SETTINGS to CFG Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
54f80dd2 |
|
02-Dec-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_HOSTNAME et al to Kconfig This converts the following to Kconfig: CONFIG_GATEWAYIP CONFIG_HOSTNAME CONFIG_IPADDR CONFIG_NETMASK CONFIG_ROOTPATH CONFIG_SERVERIP CONFIG_UBOOTPATH To do this, we introduce a CONFIG_USE_ form of each of the above and change include/env_default.h to test for that to be set before setting a value. Further, we don't want to stringify the IP address related values as they are now properly strings via Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aec118eb |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
imx6/imx7: Remove now empty imx6_spl.h and imx7_spl.h There are now no flags being set in these files, so remove them. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
This contributor prefers not to receive mails <noreply@example.com> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
dd11fdc3 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_USB_FLAGS et al to CFG Perform simple renames of: CONFIG_MXC_USB_FLAGS to CFG_MXC_USB_FLAGS CONFIG_MXC_USB_PORT to CFG_MXC_USB_PORT CONFIG_MXC_USB_PORTSC to CFG_MXC_USB_PORTSC Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
4db38665 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_UART_BASE to CFG Perform a simple rename of CONFIG_MXC_UART_BASE to CFG_MXC_UART_BASE Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0613c36a |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_EXTRA_ENV_SETTINGS to CFG Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
54f80dd2 |
|
02-Dec-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_HOSTNAME et al to Kconfig This converts the following to Kconfig: CONFIG_GATEWAYIP CONFIG_HOSTNAME CONFIG_IPADDR CONFIG_NETMASK CONFIG_ROOTPATH CONFIG_SERVERIP CONFIG_UBOOTPATH To do this, we introduce a CONFIG_USE_ form of each of the above and change include/env_default.h to test for that to be set before setting a value. Further, we don't want to stringify the IP address related values as they are now properly strings via Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aec118eb |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
imx6/imx7: Remove now empty imx6_spl.h and imx7_spl.h There are now no flags being set in these files, so remove them. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
This contributor prefers not to receive mails <noreply@example.com> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
dd11fdc3 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_USB_FLAGS et al to CFG Perform simple renames of: CONFIG_MXC_USB_FLAGS to CFG_MXC_USB_FLAGS CONFIG_MXC_USB_PORT to CFG_MXC_USB_PORT CONFIG_MXC_USB_PORTSC to CFG_MXC_USB_PORTSC Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
4db38665 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_UART_BASE to CFG Perform a simple rename of CONFIG_MXC_UART_BASE to CFG_MXC_UART_BASE Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0613c36a |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_EXTRA_ENV_SETTINGS to CFG Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
54f80dd2 |
|
02-Dec-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_HOSTNAME et al to Kconfig This converts the following to Kconfig: CONFIG_GATEWAYIP CONFIG_HOSTNAME CONFIG_IPADDR CONFIG_NETMASK CONFIG_ROOTPATH CONFIG_SERVERIP CONFIG_UBOOTPATH To do this, we introduce a CONFIG_USE_ form of each of the above and change include/env_default.h to test for that to be set before setting a value. Further, we don't want to stringify the IP address related values as they are now properly strings via Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aec118eb |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
imx6/imx7: Remove now empty imx6_spl.h and imx7_spl.h There are now no flags being set in these files, so remove them. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
This contributor prefers not to receive mails <noreply@example.com> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
dd11fdc3 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_USB_FLAGS et al to CFG Perform simple renames of: CONFIG_MXC_USB_FLAGS to CFG_MXC_USB_FLAGS CONFIG_MXC_USB_PORT to CFG_MXC_USB_PORT CONFIG_MXC_USB_PORTSC to CFG_MXC_USB_PORTSC Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
4db38665 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_UART_BASE to CFG Perform a simple rename of CONFIG_MXC_UART_BASE to CFG_MXC_UART_BASE Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0613c36a |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_EXTRA_ENV_SETTINGS to CFG Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
54f80dd2 |
|
02-Dec-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_HOSTNAME et al to Kconfig This converts the following to Kconfig: CONFIG_GATEWAYIP CONFIG_HOSTNAME CONFIG_IPADDR CONFIG_NETMASK CONFIG_ROOTPATH CONFIG_SERVERIP CONFIG_UBOOTPATH To do this, we introduce a CONFIG_USE_ form of each of the above and change include/env_default.h to test for that to be set before setting a value. Further, we don't want to stringify the IP address related values as they are now properly strings via Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aec118eb |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
imx6/imx7: Remove now empty imx6_spl.h and imx7_spl.h There are now no flags being set in these files, so remove them. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
This contributor prefers not to receive mails <noreply@example.com> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
dd11fdc3 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_USB_FLAGS et al to CFG Perform simple renames of: CONFIG_MXC_USB_FLAGS to CFG_MXC_USB_FLAGS CONFIG_MXC_USB_PORT to CFG_MXC_USB_PORT CONFIG_MXC_USB_PORTSC to CFG_MXC_USB_PORTSC Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
4db38665 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_UART_BASE to CFG Perform a simple rename of CONFIG_MXC_UART_BASE to CFG_MXC_UART_BASE Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0613c36a |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_EXTRA_ENV_SETTINGS to CFG Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
54f80dd2 |
|
02-Dec-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_HOSTNAME et al to Kconfig This converts the following to Kconfig: CONFIG_GATEWAYIP CONFIG_HOSTNAME CONFIG_IPADDR CONFIG_NETMASK CONFIG_ROOTPATH CONFIG_SERVERIP CONFIG_UBOOTPATH To do this, we introduce a CONFIG_USE_ form of each of the above and change include/env_default.h to test for that to be set before setting a value. Further, we don't want to stringify the IP address related values as they are now properly strings via Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aec118eb |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
imx6/imx7: Remove now empty imx6_spl.h and imx7_spl.h There are now no flags being set in these files, so remove them. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
This contributor prefers not to receive mails <noreply@example.com> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
dd11fdc3 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_USB_FLAGS et al to CFG Perform simple renames of: CONFIG_MXC_USB_FLAGS to CFG_MXC_USB_FLAGS CONFIG_MXC_USB_PORT to CFG_MXC_USB_PORT CONFIG_MXC_USB_PORTSC to CFG_MXC_USB_PORTSC Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
4db38665 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_UART_BASE to CFG Perform a simple rename of CONFIG_MXC_UART_BASE to CFG_MXC_UART_BASE Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0613c36a |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_EXTRA_ENV_SETTINGS to CFG Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
54f80dd2 |
|
02-Dec-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_HOSTNAME et al to Kconfig This converts the following to Kconfig: CONFIG_GATEWAYIP CONFIG_HOSTNAME CONFIG_IPADDR CONFIG_NETMASK CONFIG_ROOTPATH CONFIG_SERVERIP CONFIG_UBOOTPATH To do this, we introduce a CONFIG_USE_ form of each of the above and change include/env_default.h to test for that to be set before setting a value. Further, we don't want to stringify the IP address related values as they are now properly strings via Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aec118eb |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
imx6/imx7: Remove now empty imx6_spl.h and imx7_spl.h There are now no flags being set in these files, so remove them. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
This contributor prefers not to receive mails <noreply@example.com> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
dd11fdc3 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_USB_FLAGS et al to CFG Perform simple renames of: CONFIG_MXC_USB_FLAGS to CFG_MXC_USB_FLAGS CONFIG_MXC_USB_PORT to CFG_MXC_USB_PORT CONFIG_MXC_USB_PORTSC to CFG_MXC_USB_PORTSC Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
4db38665 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_UART_BASE to CFG Perform a simple rename of CONFIG_MXC_UART_BASE to CFG_MXC_UART_BASE Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0613c36a |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_EXTRA_ENV_SETTINGS to CFG Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
54f80dd2 |
|
02-Dec-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_HOSTNAME et al to Kconfig This converts the following to Kconfig: CONFIG_GATEWAYIP CONFIG_HOSTNAME CONFIG_IPADDR CONFIG_NETMASK CONFIG_ROOTPATH CONFIG_SERVERIP CONFIG_UBOOTPATH To do this, we introduce a CONFIG_USE_ form of each of the above and change include/env_default.h to test for that to be set before setting a value. Further, we don't want to stringify the IP address related values as they are now properly strings via Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aec118eb |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
imx6/imx7: Remove now empty imx6_spl.h and imx7_spl.h There are now no flags being set in these files, so remove them. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
This contributor prefers not to receive mails <noreply@example.com> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
dd11fdc3 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_USB_FLAGS et al to CFG Perform simple renames of: CONFIG_MXC_USB_FLAGS to CFG_MXC_USB_FLAGS CONFIG_MXC_USB_PORT to CFG_MXC_USB_PORT CONFIG_MXC_USB_PORTSC to CFG_MXC_USB_PORTSC Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
4db38665 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_UART_BASE to CFG Perform a simple rename of CONFIG_MXC_UART_BASE to CFG_MXC_UART_BASE Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0613c36a |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_EXTRA_ENV_SETTINGS to CFG Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
54f80dd2 |
|
02-Dec-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_HOSTNAME et al to Kconfig This converts the following to Kconfig: CONFIG_GATEWAYIP CONFIG_HOSTNAME CONFIG_IPADDR CONFIG_NETMASK CONFIG_ROOTPATH CONFIG_SERVERIP CONFIG_UBOOTPATH To do this, we introduce a CONFIG_USE_ form of each of the above and change include/env_default.h to test for that to be set before setting a value. Further, we don't want to stringify the IP address related values as they are now properly strings via Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aec118eb |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
imx6/imx7: Remove now empty imx6_spl.h and imx7_spl.h There are now no flags being set in these files, so remove them. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
This contributor prefers not to receive mails <noreply@example.com> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
dd11fdc3 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_USB_FLAGS et al to CFG Perform simple renames of: CONFIG_MXC_USB_FLAGS to CFG_MXC_USB_FLAGS CONFIG_MXC_USB_PORT to CFG_MXC_USB_PORT CONFIG_MXC_USB_PORTSC to CFG_MXC_USB_PORTSC Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
4db38665 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_UART_BASE to CFG Perform a simple rename of CONFIG_MXC_UART_BASE to CFG_MXC_UART_BASE Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0613c36a |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_EXTRA_ENV_SETTINGS to CFG Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
54f80dd2 |
|
02-Dec-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_HOSTNAME et al to Kconfig This converts the following to Kconfig: CONFIG_GATEWAYIP CONFIG_HOSTNAME CONFIG_IPADDR CONFIG_NETMASK CONFIG_ROOTPATH CONFIG_SERVERIP CONFIG_UBOOTPATH To do this, we introduce a CONFIG_USE_ form of each of the above and change include/env_default.h to test for that to be set before setting a value. Further, we don't want to stringify the IP address related values as they are now properly strings via Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aec118eb |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
imx6/imx7: Remove now empty imx6_spl.h and imx7_spl.h There are now no flags being set in these files, so remove them. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
This contributor prefers not to receive mails <noreply@example.com> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
dd11fdc3 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_USB_FLAGS et al to CFG Perform simple renames of: CONFIG_MXC_USB_FLAGS to CFG_MXC_USB_FLAGS CONFIG_MXC_USB_PORT to CFG_MXC_USB_PORT CONFIG_MXC_USB_PORTSC to CFG_MXC_USB_PORTSC Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
4db38665 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_UART_BASE to CFG Perform a simple rename of CONFIG_MXC_UART_BASE to CFG_MXC_UART_BASE Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0613c36a |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_EXTRA_ENV_SETTINGS to CFG Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
54f80dd2 |
|
02-Dec-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_HOSTNAME et al to Kconfig This converts the following to Kconfig: CONFIG_GATEWAYIP CONFIG_HOSTNAME CONFIG_IPADDR CONFIG_NETMASK CONFIG_ROOTPATH CONFIG_SERVERIP CONFIG_UBOOTPATH To do this, we introduce a CONFIG_USE_ form of each of the above and change include/env_default.h to test for that to be set before setting a value. Further, we don't want to stringify the IP address related values as they are now properly strings via Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aec118eb |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
imx6/imx7: Remove now empty imx6_spl.h and imx7_spl.h There are now no flags being set in these files, so remove them. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
This contributor prefers not to receive mails <noreply@example.com> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
dd11fdc3 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_USB_FLAGS et al to CFG Perform simple renames of: CONFIG_MXC_USB_FLAGS to CFG_MXC_USB_FLAGS CONFIG_MXC_USB_PORT to CFG_MXC_USB_PORT CONFIG_MXC_USB_PORTSC to CFG_MXC_USB_PORTSC Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
4db38665 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_UART_BASE to CFG Perform a simple rename of CONFIG_MXC_UART_BASE to CFG_MXC_UART_BASE Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0613c36a |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_EXTRA_ENV_SETTINGS to CFG Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
54f80dd2 |
|
02-Dec-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_HOSTNAME et al to Kconfig This converts the following to Kconfig: CONFIG_GATEWAYIP CONFIG_HOSTNAME CONFIG_IPADDR CONFIG_NETMASK CONFIG_ROOTPATH CONFIG_SERVERIP CONFIG_UBOOTPATH To do this, we introduce a CONFIG_USE_ form of each of the above and change include/env_default.h to test for that to be set before setting a value. Further, we don't want to stringify the IP address related values as they are now properly strings via Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aec118eb |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
imx6/imx7: Remove now empty imx6_spl.h and imx7_spl.h There are now no flags being set in these files, so remove them. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
This contributor prefers not to receive mails <noreply@example.com> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
dd11fdc3 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_USB_FLAGS et al to CFG Perform simple renames of: CONFIG_MXC_USB_FLAGS to CFG_MXC_USB_FLAGS CONFIG_MXC_USB_PORT to CFG_MXC_USB_PORT CONFIG_MXC_USB_PORTSC to CFG_MXC_USB_PORTSC Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
4db38665 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_UART_BASE to CFG Perform a simple rename of CONFIG_MXC_UART_BASE to CFG_MXC_UART_BASE Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0613c36a |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_EXTRA_ENV_SETTINGS to CFG Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
54f80dd2 |
|
02-Dec-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_HOSTNAME et al to Kconfig This converts the following to Kconfig: CONFIG_GATEWAYIP CONFIG_HOSTNAME CONFIG_IPADDR CONFIG_NETMASK CONFIG_ROOTPATH CONFIG_SERVERIP CONFIG_UBOOTPATH To do this, we introduce a CONFIG_USE_ form of each of the above and change include/env_default.h to test for that to be set before setting a value. Further, we don't want to stringify the IP address related values as they are now properly strings via Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aec118eb |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
imx6/imx7: Remove now empty imx6_spl.h and imx7_spl.h There are now no flags being set in these files, so remove them. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
This contributor prefers not to receive mails <noreply@example.com> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
dd11fdc3 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_USB_FLAGS et al to CFG Perform simple renames of: CONFIG_MXC_USB_FLAGS to CFG_MXC_USB_FLAGS CONFIG_MXC_USB_PORT to CFG_MXC_USB_PORT CONFIG_MXC_USB_PORTSC to CFG_MXC_USB_PORTSC Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
4db38665 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_UART_BASE to CFG Perform a simple rename of CONFIG_MXC_UART_BASE to CFG_MXC_UART_BASE Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0613c36a |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_EXTRA_ENV_SETTINGS to CFG Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
54f80dd2 |
|
02-Dec-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_HOSTNAME et al to Kconfig This converts the following to Kconfig: CONFIG_GATEWAYIP CONFIG_HOSTNAME CONFIG_IPADDR CONFIG_NETMASK CONFIG_ROOTPATH CONFIG_SERVERIP CONFIG_UBOOTPATH To do this, we introduce a CONFIG_USE_ form of each of the above and change include/env_default.h to test for that to be set before setting a value. Further, we don't want to stringify the IP address related values as they are now properly strings via Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aec118eb |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
imx6/imx7: Remove now empty imx6_spl.h and imx7_spl.h There are now no flags being set in these files, so remove them. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
This contributor prefers not to receive mails <noreply@example.com> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
dd11fdc3 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_USB_FLAGS et al to CFG Perform simple renames of: CONFIG_MXC_USB_FLAGS to CFG_MXC_USB_FLAGS CONFIG_MXC_USB_PORT to CFG_MXC_USB_PORT CONFIG_MXC_USB_PORTSC to CFG_MXC_USB_PORTSC Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
4db38665 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_UART_BASE to CFG Perform a simple rename of CONFIG_MXC_UART_BASE to CFG_MXC_UART_BASE Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0613c36a |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_EXTRA_ENV_SETTINGS to CFG Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
54f80dd2 |
|
02-Dec-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_HOSTNAME et al to Kconfig This converts the following to Kconfig: CONFIG_GATEWAYIP CONFIG_HOSTNAME CONFIG_IPADDR CONFIG_NETMASK CONFIG_ROOTPATH CONFIG_SERVERIP CONFIG_UBOOTPATH To do this, we introduce a CONFIG_USE_ form of each of the above and change include/env_default.h to test for that to be set before setting a value. Further, we don't want to stringify the IP address related values as they are now properly strings via Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aec118eb |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
imx6/imx7: Remove now empty imx6_spl.h and imx7_spl.h There are now no flags being set in these files, so remove them. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
This contributor prefers not to receive mails <noreply@example.com> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
dd11fdc3 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_USB_FLAGS et al to CFG Perform simple renames of: CONFIG_MXC_USB_FLAGS to CFG_MXC_USB_FLAGS CONFIG_MXC_USB_PORT to CFG_MXC_USB_PORT CONFIG_MXC_USB_PORTSC to CFG_MXC_USB_PORTSC Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
4db38665 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_UART_BASE to CFG Perform a simple rename of CONFIG_MXC_UART_BASE to CFG_MXC_UART_BASE Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0613c36a |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_EXTRA_ENV_SETTINGS to CFG Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
54f80dd2 |
|
02-Dec-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_HOSTNAME et al to Kconfig This converts the following to Kconfig: CONFIG_GATEWAYIP CONFIG_HOSTNAME CONFIG_IPADDR CONFIG_NETMASK CONFIG_ROOTPATH CONFIG_SERVERIP CONFIG_UBOOTPATH To do this, we introduce a CONFIG_USE_ form of each of the above and change include/env_default.h to test for that to be set before setting a value. Further, we don't want to stringify the IP address related values as they are now properly strings via Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aec118eb |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
imx6/imx7: Remove now empty imx6_spl.h and imx7_spl.h There are now no flags being set in these files, so remove them. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
This contributor prefers not to receive mails <noreply@example.com> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
dd11fdc3 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_USB_FLAGS et al to CFG Perform simple renames of: CONFIG_MXC_USB_FLAGS to CFG_MXC_USB_FLAGS CONFIG_MXC_USB_PORT to CFG_MXC_USB_PORT CONFIG_MXC_USB_PORTSC to CFG_MXC_USB_PORTSC Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
4db38665 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_UART_BASE to CFG Perform a simple rename of CONFIG_MXC_UART_BASE to CFG_MXC_UART_BASE Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0613c36a |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_EXTRA_ENV_SETTINGS to CFG Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
54f80dd2 |
|
02-Dec-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_HOSTNAME et al to Kconfig This converts the following to Kconfig: CONFIG_GATEWAYIP CONFIG_HOSTNAME CONFIG_IPADDR CONFIG_NETMASK CONFIG_ROOTPATH CONFIG_SERVERIP CONFIG_UBOOTPATH To do this, we introduce a CONFIG_USE_ form of each of the above and change include/env_default.h to test for that to be set before setting a value. Further, we don't want to stringify the IP address related values as they are now properly strings via Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aec118eb |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
imx6/imx7: Remove now empty imx6_spl.h and imx7_spl.h There are now no flags being set in these files, so remove them. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
This contributor prefers not to receive mails <noreply@example.com> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
dd11fdc3 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_USB_FLAGS et al to CFG Perform simple renames of: CONFIG_MXC_USB_FLAGS to CFG_MXC_USB_FLAGS CONFIG_MXC_USB_PORT to CFG_MXC_USB_PORT CONFIG_MXC_USB_PORTSC to CFG_MXC_USB_PORTSC Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
4db38665 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_UART_BASE to CFG Perform a simple rename of CONFIG_MXC_UART_BASE to CFG_MXC_UART_BASE Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0613c36a |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_EXTRA_ENV_SETTINGS to CFG Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
54f80dd2 |
|
02-Dec-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_HOSTNAME et al to Kconfig This converts the following to Kconfig: CONFIG_GATEWAYIP CONFIG_HOSTNAME CONFIG_IPADDR CONFIG_NETMASK CONFIG_ROOTPATH CONFIG_SERVERIP CONFIG_UBOOTPATH To do this, we introduce a CONFIG_USE_ form of each of the above and change include/env_default.h to test for that to be set before setting a value. Further, we don't want to stringify the IP address related values as they are now properly strings via Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aec118eb |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
imx6/imx7: Remove now empty imx6_spl.h and imx7_spl.h There are now no flags being set in these files, so remove them. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
This contributor prefers not to receive mails <noreply@example.com> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
dd11fdc3 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_USB_FLAGS et al to CFG Perform simple renames of: CONFIG_MXC_USB_FLAGS to CFG_MXC_USB_FLAGS CONFIG_MXC_USB_PORT to CFG_MXC_USB_PORT CONFIG_MXC_USB_PORTSC to CFG_MXC_USB_PORTSC Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
4db38665 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_UART_BASE to CFG Perform a simple rename of CONFIG_MXC_UART_BASE to CFG_MXC_UART_BASE Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0613c36a |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_EXTRA_ENV_SETTINGS to CFG Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
54f80dd2 |
|
02-Dec-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_HOSTNAME et al to Kconfig This converts the following to Kconfig: CONFIG_GATEWAYIP CONFIG_HOSTNAME CONFIG_IPADDR CONFIG_NETMASK CONFIG_ROOTPATH CONFIG_SERVERIP CONFIG_UBOOTPATH To do this, we introduce a CONFIG_USE_ form of each of the above and change include/env_default.h to test for that to be set before setting a value. Further, we don't want to stringify the IP address related values as they are now properly strings via Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aec118eb |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
imx6/imx7: Remove now empty imx6_spl.h and imx7_spl.h There are now no flags being set in these files, so remove them. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
This contributor prefers not to receive mails <noreply@example.com> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
dd11fdc3 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_USB_FLAGS et al to CFG Perform simple renames of: CONFIG_MXC_USB_FLAGS to CFG_MXC_USB_FLAGS CONFIG_MXC_USB_PORT to CFG_MXC_USB_PORT CONFIG_MXC_USB_PORTSC to CFG_MXC_USB_PORTSC Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
4db38665 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_UART_BASE to CFG Perform a simple rename of CONFIG_MXC_UART_BASE to CFG_MXC_UART_BASE Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0613c36a |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_EXTRA_ENV_SETTINGS to CFG Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
54f80dd2 |
|
02-Dec-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_HOSTNAME et al to Kconfig This converts the following to Kconfig: CONFIG_GATEWAYIP CONFIG_HOSTNAME CONFIG_IPADDR CONFIG_NETMASK CONFIG_ROOTPATH CONFIG_SERVERIP CONFIG_UBOOTPATH To do this, we introduce a CONFIG_USE_ form of each of the above and change include/env_default.h to test for that to be set before setting a value. Further, we don't want to stringify the IP address related values as they are now properly strings via Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aec118eb |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
imx6/imx7: Remove now empty imx6_spl.h and imx7_spl.h There are now no flags being set in these files, so remove them. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
This contributor prefers not to receive mails <noreply@example.com> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
dd11fdc3 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_USB_FLAGS et al to CFG Perform simple renames of: CONFIG_MXC_USB_FLAGS to CFG_MXC_USB_FLAGS CONFIG_MXC_USB_PORT to CFG_MXC_USB_PORT CONFIG_MXC_USB_PORTSC to CFG_MXC_USB_PORTSC Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
4db38665 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_UART_BASE to CFG Perform a simple rename of CONFIG_MXC_UART_BASE to CFG_MXC_UART_BASE Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0613c36a |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_EXTRA_ENV_SETTINGS to CFG Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
54f80dd2 |
|
02-Dec-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_HOSTNAME et al to Kconfig This converts the following to Kconfig: CONFIG_GATEWAYIP CONFIG_HOSTNAME CONFIG_IPADDR CONFIG_NETMASK CONFIG_ROOTPATH CONFIG_SERVERIP CONFIG_UBOOTPATH To do this, we introduce a CONFIG_USE_ form of each of the above and change include/env_default.h to test for that to be set before setting a value. Further, we don't want to stringify the IP address related values as they are now properly strings via Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aec118eb |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
imx6/imx7: Remove now empty imx6_spl.h and imx7_spl.h There are now no flags being set in these files, so remove them. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
This contributor prefers not to receive mails <noreply@example.com> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
dd11fdc3 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_USB_FLAGS et al to CFG Perform simple renames of: CONFIG_MXC_USB_FLAGS to CFG_MXC_USB_FLAGS CONFIG_MXC_USB_PORT to CFG_MXC_USB_PORT CONFIG_MXC_USB_PORTSC to CFG_MXC_USB_PORTSC Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
4db38665 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_UART_BASE to CFG Perform a simple rename of CONFIG_MXC_UART_BASE to CFG_MXC_UART_BASE Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0613c36a |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_EXTRA_ENV_SETTINGS to CFG Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
54f80dd2 |
|
02-Dec-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_HOSTNAME et al to Kconfig This converts the following to Kconfig: CONFIG_GATEWAYIP CONFIG_HOSTNAME CONFIG_IPADDR CONFIG_NETMASK CONFIG_ROOTPATH CONFIG_SERVERIP CONFIG_UBOOTPATH To do this, we introduce a CONFIG_USE_ form of each of the above and change include/env_default.h to test for that to be set before setting a value. Further, we don't want to stringify the IP address related values as they are now properly strings via Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aec118eb |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
imx6/imx7: Remove now empty imx6_spl.h and imx7_spl.h There are now no flags being set in these files, so remove them. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
This contributor prefers not to receive mails <noreply@example.com> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
dd11fdc3 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_USB_FLAGS et al to CFG Perform simple renames of: CONFIG_MXC_USB_FLAGS to CFG_MXC_USB_FLAGS CONFIG_MXC_USB_PORT to CFG_MXC_USB_PORT CONFIG_MXC_USB_PORTSC to CFG_MXC_USB_PORTSC Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
4db38665 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_UART_BASE to CFG Perform a simple rename of CONFIG_MXC_UART_BASE to CFG_MXC_UART_BASE Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0613c36a |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_EXTRA_ENV_SETTINGS to CFG Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
54f80dd2 |
|
02-Dec-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_HOSTNAME et al to Kconfig This converts the following to Kconfig: CONFIG_GATEWAYIP CONFIG_HOSTNAME CONFIG_IPADDR CONFIG_NETMASK CONFIG_ROOTPATH CONFIG_SERVERIP CONFIG_UBOOTPATH To do this, we introduce a CONFIG_USE_ form of each of the above and change include/env_default.h to test for that to be set before setting a value. Further, we don't want to stringify the IP address related values as they are now properly strings via Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aec118eb |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
imx6/imx7: Remove now empty imx6_spl.h and imx7_spl.h There are now no flags being set in these files, so remove them. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
This contributor prefers not to receive mails <noreply@example.com> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
dd11fdc3 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_USB_FLAGS et al to CFG Perform simple renames of: CONFIG_MXC_USB_FLAGS to CFG_MXC_USB_FLAGS CONFIG_MXC_USB_PORT to CFG_MXC_USB_PORT CONFIG_MXC_USB_PORTSC to CFG_MXC_USB_PORTSC Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
4db38665 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_UART_BASE to CFG Perform a simple rename of CONFIG_MXC_UART_BASE to CFG_MXC_UART_BASE Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0613c36a |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_EXTRA_ENV_SETTINGS to CFG Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
54f80dd2 |
|
02-Dec-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_HOSTNAME et al to Kconfig This converts the following to Kconfig: CONFIG_GATEWAYIP CONFIG_HOSTNAME CONFIG_IPADDR CONFIG_NETMASK CONFIG_ROOTPATH CONFIG_SERVERIP CONFIG_UBOOTPATH To do this, we introduce a CONFIG_USE_ form of each of the above and change include/env_default.h to test for that to be set before setting a value. Further, we don't want to stringify the IP address related values as they are now properly strings via Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aec118eb |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
imx6/imx7: Remove now empty imx6_spl.h and imx7_spl.h There are now no flags being set in these files, so remove them. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
This contributor prefers not to receive mails <noreply@example.com> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
dd11fdc3 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_USB_FLAGS et al to CFG Perform simple renames of: CONFIG_MXC_USB_FLAGS to CFG_MXC_USB_FLAGS CONFIG_MXC_USB_PORT to CFG_MXC_USB_PORT CONFIG_MXC_USB_PORTSC to CFG_MXC_USB_PORTSC Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
4db38665 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_UART_BASE to CFG Perform a simple rename of CONFIG_MXC_UART_BASE to CFG_MXC_UART_BASE Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0613c36a |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_EXTRA_ENV_SETTINGS to CFG Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
54f80dd2 |
|
02-Dec-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_HOSTNAME et al to Kconfig This converts the following to Kconfig: CONFIG_GATEWAYIP CONFIG_HOSTNAME CONFIG_IPADDR CONFIG_NETMASK CONFIG_ROOTPATH CONFIG_SERVERIP CONFIG_UBOOTPATH To do this, we introduce a CONFIG_USE_ form of each of the above and change include/env_default.h to test for that to be set before setting a value. Further, we don't want to stringify the IP address related values as they are now properly strings via Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aec118eb |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
imx6/imx7: Remove now empty imx6_spl.h and imx7_spl.h There are now no flags being set in these files, so remove them. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
This contributor prefers not to receive mails <noreply@example.com> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
dd11fdc3 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_USB_FLAGS et al to CFG Perform simple renames of: CONFIG_MXC_USB_FLAGS to CFG_MXC_USB_FLAGS CONFIG_MXC_USB_PORT to CFG_MXC_USB_PORT CONFIG_MXC_USB_PORTSC to CFG_MXC_USB_PORTSC Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
4db38665 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_UART_BASE to CFG Perform a simple rename of CONFIG_MXC_UART_BASE to CFG_MXC_UART_BASE Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0613c36a |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_EXTRA_ENV_SETTINGS to CFG Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
54f80dd2 |
|
02-Dec-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_HOSTNAME et al to Kconfig This converts the following to Kconfig: CONFIG_GATEWAYIP CONFIG_HOSTNAME CONFIG_IPADDR CONFIG_NETMASK CONFIG_ROOTPATH CONFIG_SERVERIP CONFIG_UBOOTPATH To do this, we introduce a CONFIG_USE_ form of each of the above and change include/env_default.h to test for that to be set before setting a value. Further, we don't want to stringify the IP address related values as they are now properly strings via Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aec118eb |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
imx6/imx7: Remove now empty imx6_spl.h and imx7_spl.h There are now no flags being set in these files, so remove them. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
This contributor prefers not to receive mails <noreply@example.com> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
dd11fdc3 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_USB_FLAGS et al to CFG Perform simple renames of: CONFIG_MXC_USB_FLAGS to CFG_MXC_USB_FLAGS CONFIG_MXC_USB_PORT to CFG_MXC_USB_PORT CONFIG_MXC_USB_PORTSC to CFG_MXC_USB_PORTSC Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
4db38665 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_UART_BASE to CFG Perform a simple rename of CONFIG_MXC_UART_BASE to CFG_MXC_UART_BASE Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0613c36a |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_EXTRA_ENV_SETTINGS to CFG Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
54f80dd2 |
|
02-Dec-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_HOSTNAME et al to Kconfig This converts the following to Kconfig: CONFIG_GATEWAYIP CONFIG_HOSTNAME CONFIG_IPADDR CONFIG_NETMASK CONFIG_ROOTPATH CONFIG_SERVERIP CONFIG_UBOOTPATH To do this, we introduce a CONFIG_USE_ form of each of the above and change include/env_default.h to test for that to be set before setting a value. Further, we don't want to stringify the IP address related values as they are now properly strings via Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aec118eb |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
imx6/imx7: Remove now empty imx6_spl.h and imx7_spl.h There are now no flags being set in these files, so remove them. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
This contributor prefers not to receive mails <noreply@example.com> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
dd11fdc3 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_USB_FLAGS et al to CFG Perform simple renames of: CONFIG_MXC_USB_FLAGS to CFG_MXC_USB_FLAGS CONFIG_MXC_USB_PORT to CFG_MXC_USB_PORT CONFIG_MXC_USB_PORTSC to CFG_MXC_USB_PORTSC Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
4db38665 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_UART_BASE to CFG Perform a simple rename of CONFIG_MXC_UART_BASE to CFG_MXC_UART_BASE Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0613c36a |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_EXTRA_ENV_SETTINGS to CFG Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
54f80dd2 |
|
02-Dec-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_HOSTNAME et al to Kconfig This converts the following to Kconfig: CONFIG_GATEWAYIP CONFIG_HOSTNAME CONFIG_IPADDR CONFIG_NETMASK CONFIG_ROOTPATH CONFIG_SERVERIP CONFIG_UBOOTPATH To do this, we introduce a CONFIG_USE_ form of each of the above and change include/env_default.h to test for that to be set before setting a value. Further, we don't want to stringify the IP address related values as they are now properly strings via Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aec118eb |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
imx6/imx7: Remove now empty imx6_spl.h and imx7_spl.h There are now no flags being set in these files, so remove them. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
This contributor prefers not to receive mails <noreply@example.com> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
dd11fdc3 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_USB_FLAGS et al to CFG Perform simple renames of: CONFIG_MXC_USB_FLAGS to CFG_MXC_USB_FLAGS CONFIG_MXC_USB_PORT to CFG_MXC_USB_PORT CONFIG_MXC_USB_PORTSC to CFG_MXC_USB_PORTSC Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
4db38665 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_UART_BASE to CFG Perform a simple rename of CONFIG_MXC_UART_BASE to CFG_MXC_UART_BASE Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0613c36a |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_EXTRA_ENV_SETTINGS to CFG Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
54f80dd2 |
|
02-Dec-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_HOSTNAME et al to Kconfig This converts the following to Kconfig: CONFIG_GATEWAYIP CONFIG_HOSTNAME CONFIG_IPADDR CONFIG_NETMASK CONFIG_ROOTPATH CONFIG_SERVERIP CONFIG_UBOOTPATH To do this, we introduce a CONFIG_USE_ form of each of the above and change include/env_default.h to test for that to be set before setting a value. Further, we don't want to stringify the IP address related values as they are now properly strings via Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aec118eb |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
imx6/imx7: Remove now empty imx6_spl.h and imx7_spl.h There are now no flags being set in these files, so remove them. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
This contributor prefers not to receive mails <noreply@example.com> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
dd11fdc3 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_USB_FLAGS et al to CFG Perform simple renames of: CONFIG_MXC_USB_FLAGS to CFG_MXC_USB_FLAGS CONFIG_MXC_USB_PORT to CFG_MXC_USB_PORT CONFIG_MXC_USB_PORTSC to CFG_MXC_USB_PORTSC Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
4db38665 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_UART_BASE to CFG Perform a simple rename of CONFIG_MXC_UART_BASE to CFG_MXC_UART_BASE Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0613c36a |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_EXTRA_ENV_SETTINGS to CFG Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
54f80dd2 |
|
02-Dec-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_HOSTNAME et al to Kconfig This converts the following to Kconfig: CONFIG_GATEWAYIP CONFIG_HOSTNAME CONFIG_IPADDR CONFIG_NETMASK CONFIG_ROOTPATH CONFIG_SERVERIP CONFIG_UBOOTPATH To do this, we introduce a CONFIG_USE_ form of each of the above and change include/env_default.h to test for that to be set before setting a value. Further, we don't want to stringify the IP address related values as they are now properly strings via Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aec118eb |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
imx6/imx7: Remove now empty imx6_spl.h and imx7_spl.h There are now no flags being set in these files, so remove them. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
This contributor prefers not to receive mails <noreply@example.com> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
dd11fdc3 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_USB_FLAGS et al to CFG Perform simple renames of: CONFIG_MXC_USB_FLAGS to CFG_MXC_USB_FLAGS CONFIG_MXC_USB_PORT to CFG_MXC_USB_PORT CONFIG_MXC_USB_PORTSC to CFG_MXC_USB_PORTSC Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
4db38665 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_UART_BASE to CFG Perform a simple rename of CONFIG_MXC_UART_BASE to CFG_MXC_UART_BASE Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0613c36a |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_EXTRA_ENV_SETTINGS to CFG Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
54f80dd2 |
|
02-Dec-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_HOSTNAME et al to Kconfig This converts the following to Kconfig: CONFIG_GATEWAYIP CONFIG_HOSTNAME CONFIG_IPADDR CONFIG_NETMASK CONFIG_ROOTPATH CONFIG_SERVERIP CONFIG_UBOOTPATH To do this, we introduce a CONFIG_USE_ form of each of the above and change include/env_default.h to test for that to be set before setting a value. Further, we don't want to stringify the IP address related values as they are now properly strings via Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aec118eb |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
imx6/imx7: Remove now empty imx6_spl.h and imx7_spl.h There are now no flags being set in these files, so remove them. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
This contributor prefers not to receive mails <noreply@example.com> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
dd11fdc3 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_USB_FLAGS et al to CFG Perform simple renames of: CONFIG_MXC_USB_FLAGS to CFG_MXC_USB_FLAGS CONFIG_MXC_USB_PORT to CFG_MXC_USB_PORT CONFIG_MXC_USB_PORTSC to CFG_MXC_USB_PORTSC Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
4db38665 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_UART_BASE to CFG Perform a simple rename of CONFIG_MXC_UART_BASE to CFG_MXC_UART_BASE Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0613c36a |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_EXTRA_ENV_SETTINGS to CFG Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
54f80dd2 |
|
02-Dec-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_HOSTNAME et al to Kconfig This converts the following to Kconfig: CONFIG_GATEWAYIP CONFIG_HOSTNAME CONFIG_IPADDR CONFIG_NETMASK CONFIG_ROOTPATH CONFIG_SERVERIP CONFIG_UBOOTPATH To do this, we introduce a CONFIG_USE_ form of each of the above and change include/env_default.h to test for that to be set before setting a value. Further, we don't want to stringify the IP address related values as they are now properly strings via Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aec118eb |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
imx6/imx7: Remove now empty imx6_spl.h and imx7_spl.h There are now no flags being set in these files, so remove them. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
This contributor prefers not to receive mails <noreply@example.com> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
dd11fdc3 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_USB_FLAGS et al to CFG Perform simple renames of: CONFIG_MXC_USB_FLAGS to CFG_MXC_USB_FLAGS CONFIG_MXC_USB_PORT to CFG_MXC_USB_PORT CONFIG_MXC_USB_PORTSC to CFG_MXC_USB_PORTSC Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
4db38665 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_UART_BASE to CFG Perform a simple rename of CONFIG_MXC_UART_BASE to CFG_MXC_UART_BASE Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0613c36a |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_EXTRA_ENV_SETTINGS to CFG Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
54f80dd2 |
|
02-Dec-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_HOSTNAME et al to Kconfig This converts the following to Kconfig: CONFIG_GATEWAYIP CONFIG_HOSTNAME CONFIG_IPADDR CONFIG_NETMASK CONFIG_ROOTPATH CONFIG_SERVERIP CONFIG_UBOOTPATH To do this, we introduce a CONFIG_USE_ form of each of the above and change include/env_default.h to test for that to be set before setting a value. Further, we don't want to stringify the IP address related values as they are now properly strings via Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aec118eb |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
imx6/imx7: Remove now empty imx6_spl.h and imx7_spl.h There are now no flags being set in these files, so remove them. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
This contributor prefers not to receive mails <noreply@example.com> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
dd11fdc3 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_USB_FLAGS et al to CFG Perform simple renames of: CONFIG_MXC_USB_FLAGS to CFG_MXC_USB_FLAGS CONFIG_MXC_USB_PORT to CFG_MXC_USB_PORT CONFIG_MXC_USB_PORTSC to CFG_MXC_USB_PORTSC Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
4db38665 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_UART_BASE to CFG Perform a simple rename of CONFIG_MXC_UART_BASE to CFG_MXC_UART_BASE Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0613c36a |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_EXTRA_ENV_SETTINGS to CFG Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
54f80dd2 |
|
02-Dec-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_HOSTNAME et al to Kconfig This converts the following to Kconfig: CONFIG_GATEWAYIP CONFIG_HOSTNAME CONFIG_IPADDR CONFIG_NETMASK CONFIG_ROOTPATH CONFIG_SERVERIP CONFIG_UBOOTPATH To do this, we introduce a CONFIG_USE_ form of each of the above and change include/env_default.h to test for that to be set before setting a value. Further, we don't want to stringify the IP address related values as they are now properly strings via Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aec118eb |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
imx6/imx7: Remove now empty imx6_spl.h and imx7_spl.h There are now no flags being set in these files, so remove them. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
This contributor prefers not to receive mails <noreply@example.com> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
dd11fdc3 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_USB_FLAGS et al to CFG Perform simple renames of: CONFIG_MXC_USB_FLAGS to CFG_MXC_USB_FLAGS CONFIG_MXC_USB_PORT to CFG_MXC_USB_PORT CONFIG_MXC_USB_PORTSC to CFG_MXC_USB_PORTSC Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
4db38665 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_UART_BASE to CFG Perform a simple rename of CONFIG_MXC_UART_BASE to CFG_MXC_UART_BASE Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0613c36a |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_EXTRA_ENV_SETTINGS to CFG Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
54f80dd2 |
|
02-Dec-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_HOSTNAME et al to Kconfig This converts the following to Kconfig: CONFIG_GATEWAYIP CONFIG_HOSTNAME CONFIG_IPADDR CONFIG_NETMASK CONFIG_ROOTPATH CONFIG_SERVERIP CONFIG_UBOOTPATH To do this, we introduce a CONFIG_USE_ form of each of the above and change include/env_default.h to test for that to be set before setting a value. Further, we don't want to stringify the IP address related values as they are now properly strings via Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aec118eb |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
imx6/imx7: Remove now empty imx6_spl.h and imx7_spl.h There are now no flags being set in these files, so remove them. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
This contributor prefers not to receive mails <noreply@example.com> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
dd11fdc3 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_USB_FLAGS et al to CFG Perform simple renames of: CONFIG_MXC_USB_FLAGS to CFG_MXC_USB_FLAGS CONFIG_MXC_USB_PORT to CFG_MXC_USB_PORT CONFIG_MXC_USB_PORTSC to CFG_MXC_USB_PORTSC Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
4db38665 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_UART_BASE to CFG Perform a simple rename of CONFIG_MXC_UART_BASE to CFG_MXC_UART_BASE Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0613c36a |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_EXTRA_ENV_SETTINGS to CFG Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
54f80dd2 |
|
02-Dec-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_HOSTNAME et al to Kconfig This converts the following to Kconfig: CONFIG_GATEWAYIP CONFIG_HOSTNAME CONFIG_IPADDR CONFIG_NETMASK CONFIG_ROOTPATH CONFIG_SERVERIP CONFIG_UBOOTPATH To do this, we introduce a CONFIG_USE_ form of each of the above and change include/env_default.h to test for that to be set before setting a value. Further, we don't want to stringify the IP address related values as they are now properly strings via Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aec118eb |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
imx6/imx7: Remove now empty imx6_spl.h and imx7_spl.h There are now no flags being set in these files, so remove them. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
This contributor prefers not to receive mails <noreply@example.com> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
dd11fdc3 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_USB_FLAGS et al to CFG Perform simple renames of: CONFIG_MXC_USB_FLAGS to CFG_MXC_USB_FLAGS CONFIG_MXC_USB_PORT to CFG_MXC_USB_PORT CONFIG_MXC_USB_PORTSC to CFG_MXC_USB_PORTSC Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
4db38665 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_UART_BASE to CFG Perform a simple rename of CONFIG_MXC_UART_BASE to CFG_MXC_UART_BASE Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0613c36a |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_EXTRA_ENV_SETTINGS to CFG Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
54f80dd2 |
|
02-Dec-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_HOSTNAME et al to Kconfig This converts the following to Kconfig: CONFIG_GATEWAYIP CONFIG_HOSTNAME CONFIG_IPADDR CONFIG_NETMASK CONFIG_ROOTPATH CONFIG_SERVERIP CONFIG_UBOOTPATH To do this, we introduce a CONFIG_USE_ form of each of the above and change include/env_default.h to test for that to be set before setting a value. Further, we don't want to stringify the IP address related values as they are now properly strings via Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aec118eb |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
imx6/imx7: Remove now empty imx6_spl.h and imx7_spl.h There are now no flags being set in these files, so remove them. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
This contributor prefers not to receive mails <noreply@example.com> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
dd11fdc3 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_USB_FLAGS et al to CFG Perform simple renames of: CONFIG_MXC_USB_FLAGS to CFG_MXC_USB_FLAGS CONFIG_MXC_USB_PORT to CFG_MXC_USB_PORT CONFIG_MXC_USB_PORTSC to CFG_MXC_USB_PORTSC Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
4db38665 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_UART_BASE to CFG Perform a simple rename of CONFIG_MXC_UART_BASE to CFG_MXC_UART_BASE Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0613c36a |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_EXTRA_ENV_SETTINGS to CFG Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
54f80dd2 |
|
02-Dec-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_HOSTNAME et al to Kconfig This converts the following to Kconfig: CONFIG_GATEWAYIP CONFIG_HOSTNAME CONFIG_IPADDR CONFIG_NETMASK CONFIG_ROOTPATH CONFIG_SERVERIP CONFIG_UBOOTPATH To do this, we introduce a CONFIG_USE_ form of each of the above and change include/env_default.h to test for that to be set before setting a value. Further, we don't want to stringify the IP address related values as they are now properly strings via Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aec118eb |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
imx6/imx7: Remove now empty imx6_spl.h and imx7_spl.h There are now no flags being set in these files, so remove them. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
This contributor prefers not to receive mails <noreply@example.com> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
dd11fdc3 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_USB_FLAGS et al to CFG Perform simple renames of: CONFIG_MXC_USB_FLAGS to CFG_MXC_USB_FLAGS CONFIG_MXC_USB_PORT to CFG_MXC_USB_PORT CONFIG_MXC_USB_PORTSC to CFG_MXC_USB_PORTSC Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
4db38665 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_UART_BASE to CFG Perform a simple rename of CONFIG_MXC_UART_BASE to CFG_MXC_UART_BASE Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0613c36a |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_EXTRA_ENV_SETTINGS to CFG Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
54f80dd2 |
|
02-Dec-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_HOSTNAME et al to Kconfig This converts the following to Kconfig: CONFIG_GATEWAYIP CONFIG_HOSTNAME CONFIG_IPADDR CONFIG_NETMASK CONFIG_ROOTPATH CONFIG_SERVERIP CONFIG_UBOOTPATH To do this, we introduce a CONFIG_USE_ form of each of the above and change include/env_default.h to test for that to be set before setting a value. Further, we don't want to stringify the IP address related values as they are now properly strings via Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aec118eb |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
imx6/imx7: Remove now empty imx6_spl.h and imx7_spl.h There are now no flags being set in these files, so remove them. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
This contributor prefers not to receive mails <noreply@example.com> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
dd11fdc3 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_USB_FLAGS et al to CFG Perform simple renames of: CONFIG_MXC_USB_FLAGS to CFG_MXC_USB_FLAGS CONFIG_MXC_USB_PORT to CFG_MXC_USB_PORT CONFIG_MXC_USB_PORTSC to CFG_MXC_USB_PORTSC Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
4db38665 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_UART_BASE to CFG Perform a simple rename of CONFIG_MXC_UART_BASE to CFG_MXC_UART_BASE Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0613c36a |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_EXTRA_ENV_SETTINGS to CFG Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
54f80dd2 |
|
02-Dec-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_HOSTNAME et al to Kconfig This converts the following to Kconfig: CONFIG_GATEWAYIP CONFIG_HOSTNAME CONFIG_IPADDR CONFIG_NETMASK CONFIG_ROOTPATH CONFIG_SERVERIP CONFIG_UBOOTPATH To do this, we introduce a CONFIG_USE_ form of each of the above and change include/env_default.h to test for that to be set before setting a value. Further, we don't want to stringify the IP address related values as they are now properly strings via Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aec118eb |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
imx6/imx7: Remove now empty imx6_spl.h and imx7_spl.h There are now no flags being set in these files, so remove them. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
This contributor prefers not to receive mails <noreply@example.com> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
dd11fdc3 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_USB_FLAGS et al to CFG Perform simple renames of: CONFIG_MXC_USB_FLAGS to CFG_MXC_USB_FLAGS CONFIG_MXC_USB_PORT to CFG_MXC_USB_PORT CONFIG_MXC_USB_PORTSC to CFG_MXC_USB_PORTSC Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
4db38665 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_UART_BASE to CFG Perform a simple rename of CONFIG_MXC_UART_BASE to CFG_MXC_UART_BASE Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0613c36a |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_EXTRA_ENV_SETTINGS to CFG Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
54f80dd2 |
|
02-Dec-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_HOSTNAME et al to Kconfig This converts the following to Kconfig: CONFIG_GATEWAYIP CONFIG_HOSTNAME CONFIG_IPADDR CONFIG_NETMASK CONFIG_ROOTPATH CONFIG_SERVERIP CONFIG_UBOOTPATH To do this, we introduce a CONFIG_USE_ form of each of the above and change include/env_default.h to test for that to be set before setting a value. Further, we don't want to stringify the IP address related values as they are now properly strings via Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aec118eb |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
imx6/imx7: Remove now empty imx6_spl.h and imx7_spl.h There are now no flags being set in these files, so remove them. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
This contributor prefers not to receive mails <noreply@example.com> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
dd11fdc3 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_USB_FLAGS et al to CFG Perform simple renames of: CONFIG_MXC_USB_FLAGS to CFG_MXC_USB_FLAGS CONFIG_MXC_USB_PORT to CFG_MXC_USB_PORT CONFIG_MXC_USB_PORTSC to CFG_MXC_USB_PORTSC Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
4db38665 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_UART_BASE to CFG Perform a simple rename of CONFIG_MXC_UART_BASE to CFG_MXC_UART_BASE Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0613c36a |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_EXTRA_ENV_SETTINGS to CFG Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
54f80dd2 |
|
02-Dec-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_HOSTNAME et al to Kconfig This converts the following to Kconfig: CONFIG_GATEWAYIP CONFIG_HOSTNAME CONFIG_IPADDR CONFIG_NETMASK CONFIG_ROOTPATH CONFIG_SERVERIP CONFIG_UBOOTPATH To do this, we introduce a CONFIG_USE_ form of each of the above and change include/env_default.h to test for that to be set before setting a value. Further, we don't want to stringify the IP address related values as they are now properly strings via Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aec118eb |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
imx6/imx7: Remove now empty imx6_spl.h and imx7_spl.h There are now no flags being set in these files, so remove them. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
This contributor prefers not to receive mails <noreply@example.com> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
dd11fdc3 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_USB_FLAGS et al to CFG Perform simple renames of: CONFIG_MXC_USB_FLAGS to CFG_MXC_USB_FLAGS CONFIG_MXC_USB_PORT to CFG_MXC_USB_PORT CONFIG_MXC_USB_PORTSC to CFG_MXC_USB_PORTSC Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
4db38665 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_UART_BASE to CFG Perform a simple rename of CONFIG_MXC_UART_BASE to CFG_MXC_UART_BASE Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0613c36a |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_EXTRA_ENV_SETTINGS to CFG Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
54f80dd2 |
|
02-Dec-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_HOSTNAME et al to Kconfig This converts the following to Kconfig: CONFIG_GATEWAYIP CONFIG_HOSTNAME CONFIG_IPADDR CONFIG_NETMASK CONFIG_ROOTPATH CONFIG_SERVERIP CONFIG_UBOOTPATH To do this, we introduce a CONFIG_USE_ form of each of the above and change include/env_default.h to test for that to be set before setting a value. Further, we don't want to stringify the IP address related values as they are now properly strings via Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aec118eb |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
imx6/imx7: Remove now empty imx6_spl.h and imx7_spl.h There are now no flags being set in these files, so remove them. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
This contributor prefers not to receive mails <noreply@example.com> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
dd11fdc3 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_USB_FLAGS et al to CFG Perform simple renames of: CONFIG_MXC_USB_FLAGS to CFG_MXC_USB_FLAGS CONFIG_MXC_USB_PORT to CFG_MXC_USB_PORT CONFIG_MXC_USB_PORTSC to CFG_MXC_USB_PORTSC Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
4db38665 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_UART_BASE to CFG Perform a simple rename of CONFIG_MXC_UART_BASE to CFG_MXC_UART_BASE Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0613c36a |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_EXTRA_ENV_SETTINGS to CFG Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
54f80dd2 |
|
02-Dec-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_HOSTNAME et al to Kconfig This converts the following to Kconfig: CONFIG_GATEWAYIP CONFIG_HOSTNAME CONFIG_IPADDR CONFIG_NETMASK CONFIG_ROOTPATH CONFIG_SERVERIP CONFIG_UBOOTPATH To do this, we introduce a CONFIG_USE_ form of each of the above and change include/env_default.h to test for that to be set before setting a value. Further, we don't want to stringify the IP address related values as they are now properly strings via Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aec118eb |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
imx6/imx7: Remove now empty imx6_spl.h and imx7_spl.h There are now no flags being set in these files, so remove them. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
This contributor prefers not to receive mails <noreply@example.com> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
dd11fdc3 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_USB_FLAGS et al to CFG Perform simple renames of: CONFIG_MXC_USB_FLAGS to CFG_MXC_USB_FLAGS CONFIG_MXC_USB_PORT to CFG_MXC_USB_PORT CONFIG_MXC_USB_PORTSC to CFG_MXC_USB_PORTSC Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
4db38665 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_UART_BASE to CFG Perform a simple rename of CONFIG_MXC_UART_BASE to CFG_MXC_UART_BASE Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0613c36a |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_EXTRA_ENV_SETTINGS to CFG Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
54f80dd2 |
|
02-Dec-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_HOSTNAME et al to Kconfig This converts the following to Kconfig: CONFIG_GATEWAYIP CONFIG_HOSTNAME CONFIG_IPADDR CONFIG_NETMASK CONFIG_ROOTPATH CONFIG_SERVERIP CONFIG_UBOOTPATH To do this, we introduce a CONFIG_USE_ form of each of the above and change include/env_default.h to test for that to be set before setting a value. Further, we don't want to stringify the IP address related values as they are now properly strings via Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aec118eb |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
imx6/imx7: Remove now empty imx6_spl.h and imx7_spl.h There are now no flags being set in these files, so remove them. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
This contributor prefers not to receive mails <noreply@example.com> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
dd11fdc3 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_USB_FLAGS et al to CFG Perform simple renames of: CONFIG_MXC_USB_FLAGS to CFG_MXC_USB_FLAGS CONFIG_MXC_USB_PORT to CFG_MXC_USB_PORT CONFIG_MXC_USB_PORTSC to CFG_MXC_USB_PORTSC Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
4db38665 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_UART_BASE to CFG Perform a simple rename of CONFIG_MXC_UART_BASE to CFG_MXC_UART_BASE Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0613c36a |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_EXTRA_ENV_SETTINGS to CFG Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
54f80dd2 |
|
02-Dec-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_HOSTNAME et al to Kconfig This converts the following to Kconfig: CONFIG_GATEWAYIP CONFIG_HOSTNAME CONFIG_IPADDR CONFIG_NETMASK CONFIG_ROOTPATH CONFIG_SERVERIP CONFIG_UBOOTPATH To do this, we introduce a CONFIG_USE_ form of each of the above and change include/env_default.h to test for that to be set before setting a value. Further, we don't want to stringify the IP address related values as they are now properly strings via Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aec118eb |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
imx6/imx7: Remove now empty imx6_spl.h and imx7_spl.h There are now no flags being set in these files, so remove them. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
This contributor prefers not to receive mails <noreply@example.com> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
dd11fdc3 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_USB_FLAGS et al to CFG Perform simple renames of: CONFIG_MXC_USB_FLAGS to CFG_MXC_USB_FLAGS CONFIG_MXC_USB_PORT to CFG_MXC_USB_PORT CONFIG_MXC_USB_PORTSC to CFG_MXC_USB_PORTSC Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
4db38665 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_UART_BASE to CFG Perform a simple rename of CONFIG_MXC_UART_BASE to CFG_MXC_UART_BASE Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0613c36a |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_EXTRA_ENV_SETTINGS to CFG Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
54f80dd2 |
|
02-Dec-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_HOSTNAME et al to Kconfig This converts the following to Kconfig: CONFIG_GATEWAYIP CONFIG_HOSTNAME CONFIG_IPADDR CONFIG_NETMASK CONFIG_ROOTPATH CONFIG_SERVERIP CONFIG_UBOOTPATH To do this, we introduce a CONFIG_USE_ form of each of the above and change include/env_default.h to test for that to be set before setting a value. Further, we don't want to stringify the IP address related values as they are now properly strings via Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aec118eb |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
imx6/imx7: Remove now empty imx6_spl.h and imx7_spl.h There are now no flags being set in these files, so remove them. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
This contributor prefers not to receive mails <noreply@example.com> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
dd11fdc3 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_USB_FLAGS et al to CFG Perform simple renames of: CONFIG_MXC_USB_FLAGS to CFG_MXC_USB_FLAGS CONFIG_MXC_USB_PORT to CFG_MXC_USB_PORT CONFIG_MXC_USB_PORTSC to CFG_MXC_USB_PORTSC Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
4db38665 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_UART_BASE to CFG Perform a simple rename of CONFIG_MXC_UART_BASE to CFG_MXC_UART_BASE Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0613c36a |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_EXTRA_ENV_SETTINGS to CFG Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
54f80dd2 |
|
02-Dec-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_HOSTNAME et al to Kconfig This converts the following to Kconfig: CONFIG_GATEWAYIP CONFIG_HOSTNAME CONFIG_IPADDR CONFIG_NETMASK CONFIG_ROOTPATH CONFIG_SERVERIP CONFIG_UBOOTPATH To do this, we introduce a CONFIG_USE_ form of each of the above and change include/env_default.h to test for that to be set before setting a value. Further, we don't want to stringify the IP address related values as they are now properly strings via Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aec118eb |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
imx6/imx7: Remove now empty imx6_spl.h and imx7_spl.h There are now no flags being set in these files, so remove them. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
This contributor prefers not to receive mails <noreply@example.com> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
dd11fdc3 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_USB_FLAGS et al to CFG Perform simple renames of: CONFIG_MXC_USB_FLAGS to CFG_MXC_USB_FLAGS CONFIG_MXC_USB_PORT to CFG_MXC_USB_PORT CONFIG_MXC_USB_PORTSC to CFG_MXC_USB_PORTSC Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
4db38665 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_UART_BASE to CFG Perform a simple rename of CONFIG_MXC_UART_BASE to CFG_MXC_UART_BASE Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0613c36a |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_EXTRA_ENV_SETTINGS to CFG Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
54f80dd2 |
|
02-Dec-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_HOSTNAME et al to Kconfig This converts the following to Kconfig: CONFIG_GATEWAYIP CONFIG_HOSTNAME CONFIG_IPADDR CONFIG_NETMASK CONFIG_ROOTPATH CONFIG_SERVERIP CONFIG_UBOOTPATH To do this, we introduce a CONFIG_USE_ form of each of the above and change include/env_default.h to test for that to be set before setting a value. Further, we don't want to stringify the IP address related values as they are now properly strings via Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aec118eb |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
imx6/imx7: Remove now empty imx6_spl.h and imx7_spl.h There are now no flags being set in these files, so remove them. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
This contributor prefers not to receive mails <noreply@example.com> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
dd11fdc3 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_USB_FLAGS et al to CFG Perform simple renames of: CONFIG_MXC_USB_FLAGS to CFG_MXC_USB_FLAGS CONFIG_MXC_USB_PORT to CFG_MXC_USB_PORT CONFIG_MXC_USB_PORTSC to CFG_MXC_USB_PORTSC Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
4db38665 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_UART_BASE to CFG Perform a simple rename of CONFIG_MXC_UART_BASE to CFG_MXC_UART_BASE Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0613c36a |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_EXTRA_ENV_SETTINGS to CFG Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
54f80dd2 |
|
02-Dec-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_HOSTNAME et al to Kconfig This converts the following to Kconfig: CONFIG_GATEWAYIP CONFIG_HOSTNAME CONFIG_IPADDR CONFIG_NETMASK CONFIG_ROOTPATH CONFIG_SERVERIP CONFIG_UBOOTPATH To do this, we introduce a CONFIG_USE_ form of each of the above and change include/env_default.h to test for that to be set before setting a value. Further, we don't want to stringify the IP address related values as they are now properly strings via Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aec118eb |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
imx6/imx7: Remove now empty imx6_spl.h and imx7_spl.h There are now no flags being set in these files, so remove them. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
This contributor prefers not to receive mails <noreply@example.com> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
dd11fdc3 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_USB_FLAGS et al to CFG Perform simple renames of: CONFIG_MXC_USB_FLAGS to CFG_MXC_USB_FLAGS CONFIG_MXC_USB_PORT to CFG_MXC_USB_PORT CONFIG_MXC_USB_PORTSC to CFG_MXC_USB_PORTSC Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
4db38665 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_UART_BASE to CFG Perform a simple rename of CONFIG_MXC_UART_BASE to CFG_MXC_UART_BASE Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0613c36a |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_EXTRA_ENV_SETTINGS to CFG Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
54f80dd2 |
|
02-Dec-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_HOSTNAME et al to Kconfig This converts the following to Kconfig: CONFIG_GATEWAYIP CONFIG_HOSTNAME CONFIG_IPADDR CONFIG_NETMASK CONFIG_ROOTPATH CONFIG_SERVERIP CONFIG_UBOOTPATH To do this, we introduce a CONFIG_USE_ form of each of the above and change include/env_default.h to test for that to be set before setting a value. Further, we don't want to stringify the IP address related values as they are now properly strings via Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aec118eb |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
imx6/imx7: Remove now empty imx6_spl.h and imx7_spl.h There are now no flags being set in these files, so remove them. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
This contributor prefers not to receive mails <noreply@example.com> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
dd11fdc3 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_USB_FLAGS et al to CFG Perform simple renames of: CONFIG_MXC_USB_FLAGS to CFG_MXC_USB_FLAGS CONFIG_MXC_USB_PORT to CFG_MXC_USB_PORT CONFIG_MXC_USB_PORTSC to CFG_MXC_USB_PORTSC Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
4db38665 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_UART_BASE to CFG Perform a simple rename of CONFIG_MXC_UART_BASE to CFG_MXC_UART_BASE Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0613c36a |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_EXTRA_ENV_SETTINGS to CFG Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
54f80dd2 |
|
02-Dec-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_HOSTNAME et al to Kconfig This converts the following to Kconfig: CONFIG_GATEWAYIP CONFIG_HOSTNAME CONFIG_IPADDR CONFIG_NETMASK CONFIG_ROOTPATH CONFIG_SERVERIP CONFIG_UBOOTPATH To do this, we introduce a CONFIG_USE_ form of each of the above and change include/env_default.h to test for that to be set before setting a value. Further, we don't want to stringify the IP address related values as they are now properly strings via Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aec118eb |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
imx6/imx7: Remove now empty imx6_spl.h and imx7_spl.h There are now no flags being set in these files, so remove them. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
This contributor prefers not to receive mails <noreply@example.com> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
dd11fdc3 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_USB_FLAGS et al to CFG Perform simple renames of: CONFIG_MXC_USB_FLAGS to CFG_MXC_USB_FLAGS CONFIG_MXC_USB_PORT to CFG_MXC_USB_PORT CONFIG_MXC_USB_PORTSC to CFG_MXC_USB_PORTSC Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
4db38665 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_UART_BASE to CFG Perform a simple rename of CONFIG_MXC_UART_BASE to CFG_MXC_UART_BASE Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0613c36a |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_EXTRA_ENV_SETTINGS to CFG Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
54f80dd2 |
|
02-Dec-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_HOSTNAME et al to Kconfig This converts the following to Kconfig: CONFIG_GATEWAYIP CONFIG_HOSTNAME CONFIG_IPADDR CONFIG_NETMASK CONFIG_ROOTPATH CONFIG_SERVERIP CONFIG_UBOOTPATH To do this, we introduce a CONFIG_USE_ form of each of the above and change include/env_default.h to test for that to be set before setting a value. Further, we don't want to stringify the IP address related values as they are now properly strings via Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aec118eb |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
imx6/imx7: Remove now empty imx6_spl.h and imx7_spl.h There are now no flags being set in these files, so remove them. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
This contributor prefers not to receive mails <noreply@example.com> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
dd11fdc3 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_USB_FLAGS et al to CFG Perform simple renames of: CONFIG_MXC_USB_FLAGS to CFG_MXC_USB_FLAGS CONFIG_MXC_USB_PORT to CFG_MXC_USB_PORT CONFIG_MXC_USB_PORTSC to CFG_MXC_USB_PORTSC Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
4db38665 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_UART_BASE to CFG Perform a simple rename of CONFIG_MXC_UART_BASE to CFG_MXC_UART_BASE Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0613c36a |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_EXTRA_ENV_SETTINGS to CFG Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
54f80dd2 |
|
02-Dec-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_HOSTNAME et al to Kconfig This converts the following to Kconfig: CONFIG_GATEWAYIP CONFIG_HOSTNAME CONFIG_IPADDR CONFIG_NETMASK CONFIG_ROOTPATH CONFIG_SERVERIP CONFIG_UBOOTPATH To do this, we introduce a CONFIG_USE_ form of each of the above and change include/env_default.h to test for that to be set before setting a value. Further, we don't want to stringify the IP address related values as they are now properly strings via Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aec118eb |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
imx6/imx7: Remove now empty imx6_spl.h and imx7_spl.h There are now no flags being set in these files, so remove them. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
This contributor prefers not to receive mails <noreply@example.com> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
dd11fdc3 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_USB_FLAGS et al to CFG Perform simple renames of: CONFIG_MXC_USB_FLAGS to CFG_MXC_USB_FLAGS CONFIG_MXC_USB_PORT to CFG_MXC_USB_PORT CONFIG_MXC_USB_PORTSC to CFG_MXC_USB_PORTSC Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
4db38665 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_UART_BASE to CFG Perform a simple rename of CONFIG_MXC_UART_BASE to CFG_MXC_UART_BASE Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0613c36a |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_EXTRA_ENV_SETTINGS to CFG Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
54f80dd2 |
|
02-Dec-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_HOSTNAME et al to Kconfig This converts the following to Kconfig: CONFIG_GATEWAYIP CONFIG_HOSTNAME CONFIG_IPADDR CONFIG_NETMASK CONFIG_ROOTPATH CONFIG_SERVERIP CONFIG_UBOOTPATH To do this, we introduce a CONFIG_USE_ form of each of the above and change include/env_default.h to test for that to be set before setting a value. Further, we don't want to stringify the IP address related values as they are now properly strings via Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aec118eb |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
imx6/imx7: Remove now empty imx6_spl.h and imx7_spl.h There are now no flags being set in these files, so remove them. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
This contributor prefers not to receive mails <noreply@example.com> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
dd11fdc3 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_USB_FLAGS et al to CFG Perform simple renames of: CONFIG_MXC_USB_FLAGS to CFG_MXC_USB_FLAGS CONFIG_MXC_USB_PORT to CFG_MXC_USB_PORT CONFIG_MXC_USB_PORTSC to CFG_MXC_USB_PORTSC Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
4db38665 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_UART_BASE to CFG Perform a simple rename of CONFIG_MXC_UART_BASE to CFG_MXC_UART_BASE Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0613c36a |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_EXTRA_ENV_SETTINGS to CFG Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
54f80dd2 |
|
02-Dec-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_HOSTNAME et al to Kconfig This converts the following to Kconfig: CONFIG_GATEWAYIP CONFIG_HOSTNAME CONFIG_IPADDR CONFIG_NETMASK CONFIG_ROOTPATH CONFIG_SERVERIP CONFIG_UBOOTPATH To do this, we introduce a CONFIG_USE_ form of each of the above and change include/env_default.h to test for that to be set before setting a value. Further, we don't want to stringify the IP address related values as they are now properly strings via Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aec118eb |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
imx6/imx7: Remove now empty imx6_spl.h and imx7_spl.h There are now no flags being set in these files, so remove them. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
This contributor prefers not to receive mails <noreply@example.com> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
dd11fdc3 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_USB_FLAGS et al to CFG Perform simple renames of: CONFIG_MXC_USB_FLAGS to CFG_MXC_USB_FLAGS CONFIG_MXC_USB_PORT to CFG_MXC_USB_PORT CONFIG_MXC_USB_PORTSC to CFG_MXC_USB_PORTSC Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
4db38665 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_UART_BASE to CFG Perform a simple rename of CONFIG_MXC_UART_BASE to CFG_MXC_UART_BASE Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0613c36a |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_EXTRA_ENV_SETTINGS to CFG Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
54f80dd2 |
|
02-Dec-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_HOSTNAME et al to Kconfig This converts the following to Kconfig: CONFIG_GATEWAYIP CONFIG_HOSTNAME CONFIG_IPADDR CONFIG_NETMASK CONFIG_ROOTPATH CONFIG_SERVERIP CONFIG_UBOOTPATH To do this, we introduce a CONFIG_USE_ form of each of the above and change include/env_default.h to test for that to be set before setting a value. Further, we don't want to stringify the IP address related values as they are now properly strings via Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aec118eb |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
imx6/imx7: Remove now empty imx6_spl.h and imx7_spl.h There are now no flags being set in these files, so remove them. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
This contributor prefers not to receive mails <noreply@example.com> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
dd11fdc3 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_USB_FLAGS et al to CFG Perform simple renames of: CONFIG_MXC_USB_FLAGS to CFG_MXC_USB_FLAGS CONFIG_MXC_USB_PORT to CFG_MXC_USB_PORT CONFIG_MXC_USB_PORTSC to CFG_MXC_USB_PORTSC Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
4db38665 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_UART_BASE to CFG Perform a simple rename of CONFIG_MXC_UART_BASE to CFG_MXC_UART_BASE Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0613c36a |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_EXTRA_ENV_SETTINGS to CFG Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
54f80dd2 |
|
02-Dec-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_HOSTNAME et al to Kconfig This converts the following to Kconfig: CONFIG_GATEWAYIP CONFIG_HOSTNAME CONFIG_IPADDR CONFIG_NETMASK CONFIG_ROOTPATH CONFIG_SERVERIP CONFIG_UBOOTPATH To do this, we introduce a CONFIG_USE_ form of each of the above and change include/env_default.h to test for that to be set before setting a value. Further, we don't want to stringify the IP address related values as they are now properly strings via Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aec118eb |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
imx6/imx7: Remove now empty imx6_spl.h and imx7_spl.h There are now no flags being set in these files, so remove them. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
This contributor prefers not to receive mails <noreply@example.com> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
dd11fdc3 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_USB_FLAGS et al to CFG Perform simple renames of: CONFIG_MXC_USB_FLAGS to CFG_MXC_USB_FLAGS CONFIG_MXC_USB_PORT to CFG_MXC_USB_PORT CONFIG_MXC_USB_PORTSC to CFG_MXC_USB_PORTSC Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
4db38665 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_UART_BASE to CFG Perform a simple rename of CONFIG_MXC_UART_BASE to CFG_MXC_UART_BASE Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0613c36a |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_EXTRA_ENV_SETTINGS to CFG Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
54f80dd2 |
|
02-Dec-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_HOSTNAME et al to Kconfig This converts the following to Kconfig: CONFIG_GATEWAYIP CONFIG_HOSTNAME CONFIG_IPADDR CONFIG_NETMASK CONFIG_ROOTPATH CONFIG_SERVERIP CONFIG_UBOOTPATH To do this, we introduce a CONFIG_USE_ form of each of the above and change include/env_default.h to test for that to be set before setting a value. Further, we don't want to stringify the IP address related values as they are now properly strings via Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aec118eb |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
imx6/imx7: Remove now empty imx6_spl.h and imx7_spl.h There are now no flags being set in these files, so remove them. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
This contributor prefers not to receive mails <noreply@example.com> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
dd11fdc3 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_USB_FLAGS et al to CFG Perform simple renames of: CONFIG_MXC_USB_FLAGS to CFG_MXC_USB_FLAGS CONFIG_MXC_USB_PORT to CFG_MXC_USB_PORT CONFIG_MXC_USB_PORTSC to CFG_MXC_USB_PORTSC Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
4db38665 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_UART_BASE to CFG Perform a simple rename of CONFIG_MXC_UART_BASE to CFG_MXC_UART_BASE Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0613c36a |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_EXTRA_ENV_SETTINGS to CFG Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
54f80dd2 |
|
02-Dec-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_HOSTNAME et al to Kconfig This converts the following to Kconfig: CONFIG_GATEWAYIP CONFIG_HOSTNAME CONFIG_IPADDR CONFIG_NETMASK CONFIG_ROOTPATH CONFIG_SERVERIP CONFIG_UBOOTPATH To do this, we introduce a CONFIG_USE_ form of each of the above and change include/env_default.h to test for that to be set before setting a value. Further, we don't want to stringify the IP address related values as they are now properly strings via Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aec118eb |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
imx6/imx7: Remove now empty imx6_spl.h and imx7_spl.h There are now no flags being set in these files, so remove them. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
This contributor prefers not to receive mails <noreply@example.com> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
dd11fdc3 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_USB_FLAGS et al to CFG Perform simple renames of: CONFIG_MXC_USB_FLAGS to CFG_MXC_USB_FLAGS CONFIG_MXC_USB_PORT to CFG_MXC_USB_PORT CONFIG_MXC_USB_PORTSC to CFG_MXC_USB_PORTSC Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
4db38665 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_UART_BASE to CFG Perform a simple rename of CONFIG_MXC_UART_BASE to CFG_MXC_UART_BASE Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0613c36a |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_EXTRA_ENV_SETTINGS to CFG Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
54f80dd2 |
|
02-Dec-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_HOSTNAME et al to Kconfig This converts the following to Kconfig: CONFIG_GATEWAYIP CONFIG_HOSTNAME CONFIG_IPADDR CONFIG_NETMASK CONFIG_ROOTPATH CONFIG_SERVERIP CONFIG_UBOOTPATH To do this, we introduce a CONFIG_USE_ form of each of the above and change include/env_default.h to test for that to be set before setting a value. Further, we don't want to stringify the IP address related values as they are now properly strings via Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aec118eb |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
imx6/imx7: Remove now empty imx6_spl.h and imx7_spl.h There are now no flags being set in these files, so remove them. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
This contributor prefers not to receive mails <noreply@example.com> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
dd11fdc3 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_USB_FLAGS et al to CFG Perform simple renames of: CONFIG_MXC_USB_FLAGS to CFG_MXC_USB_FLAGS CONFIG_MXC_USB_PORT to CFG_MXC_USB_PORT CONFIG_MXC_USB_PORTSC to CFG_MXC_USB_PORTSC Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
4db38665 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_UART_BASE to CFG Perform a simple rename of CONFIG_MXC_UART_BASE to CFG_MXC_UART_BASE Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0613c36a |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_EXTRA_ENV_SETTINGS to CFG Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
54f80dd2 |
|
02-Dec-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_HOSTNAME et al to Kconfig This converts the following to Kconfig: CONFIG_GATEWAYIP CONFIG_HOSTNAME CONFIG_IPADDR CONFIG_NETMASK CONFIG_ROOTPATH CONFIG_SERVERIP CONFIG_UBOOTPATH To do this, we introduce a CONFIG_USE_ form of each of the above and change include/env_default.h to test for that to be set before setting a value. Further, we don't want to stringify the IP address related values as they are now properly strings via Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aec118eb |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
imx6/imx7: Remove now empty imx6_spl.h and imx7_spl.h There are now no flags being set in these files, so remove them. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
This contributor prefers not to receive mails <noreply@example.com> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
dd11fdc3 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_USB_FLAGS et al to CFG Perform simple renames of: CONFIG_MXC_USB_FLAGS to CFG_MXC_USB_FLAGS CONFIG_MXC_USB_PORT to CFG_MXC_USB_PORT CONFIG_MXC_USB_PORTSC to CFG_MXC_USB_PORTSC Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
4db38665 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_UART_BASE to CFG Perform a simple rename of CONFIG_MXC_UART_BASE to CFG_MXC_UART_BASE Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0613c36a |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_EXTRA_ENV_SETTINGS to CFG Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
54f80dd2 |
|
02-Dec-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_HOSTNAME et al to Kconfig This converts the following to Kconfig: CONFIG_GATEWAYIP CONFIG_HOSTNAME CONFIG_IPADDR CONFIG_NETMASK CONFIG_ROOTPATH CONFIG_SERVERIP CONFIG_UBOOTPATH To do this, we introduce a CONFIG_USE_ form of each of the above and change include/env_default.h to test for that to be set before setting a value. Further, we don't want to stringify the IP address related values as they are now properly strings via Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aec118eb |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
imx6/imx7: Remove now empty imx6_spl.h and imx7_spl.h There are now no flags being set in these files, so remove them. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
This contributor prefers not to receive mails <noreply@example.com> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
dd11fdc3 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_USB_FLAGS et al to CFG Perform simple renames of: CONFIG_MXC_USB_FLAGS to CFG_MXC_USB_FLAGS CONFIG_MXC_USB_PORT to CFG_MXC_USB_PORT CONFIG_MXC_USB_PORTSC to CFG_MXC_USB_PORTSC Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
4db38665 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_UART_BASE to CFG Perform a simple rename of CONFIG_MXC_UART_BASE to CFG_MXC_UART_BASE Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0613c36a |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_EXTRA_ENV_SETTINGS to CFG Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
54f80dd2 |
|
02-Dec-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_HOSTNAME et al to Kconfig This converts the following to Kconfig: CONFIG_GATEWAYIP CONFIG_HOSTNAME CONFIG_IPADDR CONFIG_NETMASK CONFIG_ROOTPATH CONFIG_SERVERIP CONFIG_UBOOTPATH To do this, we introduce a CONFIG_USE_ form of each of the above and change include/env_default.h to test for that to be set before setting a value. Further, we don't want to stringify the IP address related values as they are now properly strings via Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aec118eb |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
imx6/imx7: Remove now empty imx6_spl.h and imx7_spl.h There are now no flags being set in these files, so remove them. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
This contributor prefers not to receive mails <noreply@example.com> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
dd11fdc3 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_USB_FLAGS et al to CFG Perform simple renames of: CONFIG_MXC_USB_FLAGS to CFG_MXC_USB_FLAGS CONFIG_MXC_USB_PORT to CFG_MXC_USB_PORT CONFIG_MXC_USB_PORTSC to CFG_MXC_USB_PORTSC Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
4db38665 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_UART_BASE to CFG Perform a simple rename of CONFIG_MXC_UART_BASE to CFG_MXC_UART_BASE Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0613c36a |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_EXTRA_ENV_SETTINGS to CFG Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
54f80dd2 |
|
02-Dec-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_HOSTNAME et al to Kconfig This converts the following to Kconfig: CONFIG_GATEWAYIP CONFIG_HOSTNAME CONFIG_IPADDR CONFIG_NETMASK CONFIG_ROOTPATH CONFIG_SERVERIP CONFIG_UBOOTPATH To do this, we introduce a CONFIG_USE_ form of each of the above and change include/env_default.h to test for that to be set before setting a value. Further, we don't want to stringify the IP address related values as they are now properly strings via Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aec118eb |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
imx6/imx7: Remove now empty imx6_spl.h and imx7_spl.h There are now no flags being set in these files, so remove them. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
This contributor prefers not to receive mails <noreply@example.com> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
dd11fdc3 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_USB_FLAGS et al to CFG Perform simple renames of: CONFIG_MXC_USB_FLAGS to CFG_MXC_USB_FLAGS CONFIG_MXC_USB_PORT to CFG_MXC_USB_PORT CONFIG_MXC_USB_PORTSC to CFG_MXC_USB_PORTSC Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
4db38665 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_UART_BASE to CFG Perform a simple rename of CONFIG_MXC_UART_BASE to CFG_MXC_UART_BASE Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0613c36a |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_EXTRA_ENV_SETTINGS to CFG Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
54f80dd2 |
|
02-Dec-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_HOSTNAME et al to Kconfig This converts the following to Kconfig: CONFIG_GATEWAYIP CONFIG_HOSTNAME CONFIG_IPADDR CONFIG_NETMASK CONFIG_ROOTPATH CONFIG_SERVERIP CONFIG_UBOOTPATH To do this, we introduce a CONFIG_USE_ form of each of the above and change include/env_default.h to test for that to be set before setting a value. Further, we don't want to stringify the IP address related values as they are now properly strings via Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aec118eb |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
imx6/imx7: Remove now empty imx6_spl.h and imx7_spl.h There are now no flags being set in these files, so remove them. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
This contributor prefers not to receive mails <noreply@example.com> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
dd11fdc3 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_USB_FLAGS et al to CFG Perform simple renames of: CONFIG_MXC_USB_FLAGS to CFG_MXC_USB_FLAGS CONFIG_MXC_USB_PORT to CFG_MXC_USB_PORT CONFIG_MXC_USB_PORTSC to CFG_MXC_USB_PORTSC Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
4db38665 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_UART_BASE to CFG Perform a simple rename of CONFIG_MXC_UART_BASE to CFG_MXC_UART_BASE Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0613c36a |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_EXTRA_ENV_SETTINGS to CFG Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
54f80dd2 |
|
02-Dec-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_HOSTNAME et al to Kconfig This converts the following to Kconfig: CONFIG_GATEWAYIP CONFIG_HOSTNAME CONFIG_IPADDR CONFIG_NETMASK CONFIG_ROOTPATH CONFIG_SERVERIP CONFIG_UBOOTPATH To do this, we introduce a CONFIG_USE_ form of each of the above and change include/env_default.h to test for that to be set before setting a value. Further, we don't want to stringify the IP address related values as they are now properly strings via Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aec118eb |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
imx6/imx7: Remove now empty imx6_spl.h and imx7_spl.h There are now no flags being set in these files, so remove them. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
This contributor prefers not to receive mails <noreply@example.com> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
dd11fdc3 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_USB_FLAGS et al to CFG Perform simple renames of: CONFIG_MXC_USB_FLAGS to CFG_MXC_USB_FLAGS CONFIG_MXC_USB_PORT to CFG_MXC_USB_PORT CONFIG_MXC_USB_PORTSC to CFG_MXC_USB_PORTSC Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
4db38665 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_UART_BASE to CFG Perform a simple rename of CONFIG_MXC_UART_BASE to CFG_MXC_UART_BASE Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0613c36a |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_EXTRA_ENV_SETTINGS to CFG Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
54f80dd2 |
|
02-Dec-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_HOSTNAME et al to Kconfig This converts the following to Kconfig: CONFIG_GATEWAYIP CONFIG_HOSTNAME CONFIG_IPADDR CONFIG_NETMASK CONFIG_ROOTPATH CONFIG_SERVERIP CONFIG_UBOOTPATH To do this, we introduce a CONFIG_USE_ form of each of the above and change include/env_default.h to test for that to be set before setting a value. Further, we don't want to stringify the IP address related values as they are now properly strings via Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aec118eb |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
imx6/imx7: Remove now empty imx6_spl.h and imx7_spl.h There are now no flags being set in these files, so remove them. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
This contributor prefers not to receive mails <noreply@example.com> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
dd11fdc3 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_USB_FLAGS et al to CFG Perform simple renames of: CONFIG_MXC_USB_FLAGS to CFG_MXC_USB_FLAGS CONFIG_MXC_USB_PORT to CFG_MXC_USB_PORT CONFIG_MXC_USB_PORTSC to CFG_MXC_USB_PORTSC Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
4db38665 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_UART_BASE to CFG Perform a simple rename of CONFIG_MXC_UART_BASE to CFG_MXC_UART_BASE Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0613c36a |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_EXTRA_ENV_SETTINGS to CFG Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
54f80dd2 |
|
02-Dec-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_HOSTNAME et al to Kconfig This converts the following to Kconfig: CONFIG_GATEWAYIP CONFIG_HOSTNAME CONFIG_IPADDR CONFIG_NETMASK CONFIG_ROOTPATH CONFIG_SERVERIP CONFIG_UBOOTPATH To do this, we introduce a CONFIG_USE_ form of each of the above and change include/env_default.h to test for that to be set before setting a value. Further, we don't want to stringify the IP address related values as they are now properly strings via Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aec118eb |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
imx6/imx7: Remove now empty imx6_spl.h and imx7_spl.h There are now no flags being set in these files, so remove them. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
This contributor prefers not to receive mails <noreply@example.com> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
dd11fdc3 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_USB_FLAGS et al to CFG Perform simple renames of: CONFIG_MXC_USB_FLAGS to CFG_MXC_USB_FLAGS CONFIG_MXC_USB_PORT to CFG_MXC_USB_PORT CONFIG_MXC_USB_PORTSC to CFG_MXC_USB_PORTSC Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
4db38665 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_UART_BASE to CFG Perform a simple rename of CONFIG_MXC_UART_BASE to CFG_MXC_UART_BASE Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0613c36a |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_EXTRA_ENV_SETTINGS to CFG Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
54f80dd2 |
|
02-Dec-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_HOSTNAME et al to Kconfig This converts the following to Kconfig: CONFIG_GATEWAYIP CONFIG_HOSTNAME CONFIG_IPADDR CONFIG_NETMASK CONFIG_ROOTPATH CONFIG_SERVERIP CONFIG_UBOOTPATH To do this, we introduce a CONFIG_USE_ form of each of the above and change include/env_default.h to test for that to be set before setting a value. Further, we don't want to stringify the IP address related values as they are now properly strings via Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aec118eb |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
imx6/imx7: Remove now empty imx6_spl.h and imx7_spl.h There are now no flags being set in these files, so remove them. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
This contributor prefers not to receive mails <noreply@example.com> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
dd11fdc3 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_USB_FLAGS et al to CFG Perform simple renames of: CONFIG_MXC_USB_FLAGS to CFG_MXC_USB_FLAGS CONFIG_MXC_USB_PORT to CFG_MXC_USB_PORT CONFIG_MXC_USB_PORTSC to CFG_MXC_USB_PORTSC Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
4db38665 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_UART_BASE to CFG Perform a simple rename of CONFIG_MXC_UART_BASE to CFG_MXC_UART_BASE Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0613c36a |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_EXTRA_ENV_SETTINGS to CFG Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
54f80dd2 |
|
02-Dec-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_HOSTNAME et al to Kconfig This converts the following to Kconfig: CONFIG_GATEWAYIP CONFIG_HOSTNAME CONFIG_IPADDR CONFIG_NETMASK CONFIG_ROOTPATH CONFIG_SERVERIP CONFIG_UBOOTPATH To do this, we introduce a CONFIG_USE_ form of each of the above and change include/env_default.h to test for that to be set before setting a value. Further, we don't want to stringify the IP address related values as they are now properly strings via Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aec118eb |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
imx6/imx7: Remove now empty imx6_spl.h and imx7_spl.h There are now no flags being set in these files, so remove them. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
This contributor prefers not to receive mails <noreply@example.com> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
dd11fdc3 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_USB_FLAGS et al to CFG Perform simple renames of: CONFIG_MXC_USB_FLAGS to CFG_MXC_USB_FLAGS CONFIG_MXC_USB_PORT to CFG_MXC_USB_PORT CONFIG_MXC_USB_PORTSC to CFG_MXC_USB_PORTSC Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
4db38665 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_UART_BASE to CFG Perform a simple rename of CONFIG_MXC_UART_BASE to CFG_MXC_UART_BASE Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0613c36a |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_EXTRA_ENV_SETTINGS to CFG Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
54f80dd2 |
|
02-Dec-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_HOSTNAME et al to Kconfig This converts the following to Kconfig: CONFIG_GATEWAYIP CONFIG_HOSTNAME CONFIG_IPADDR CONFIG_NETMASK CONFIG_ROOTPATH CONFIG_SERVERIP CONFIG_UBOOTPATH To do this, we introduce a CONFIG_USE_ form of each of the above and change include/env_default.h to test for that to be set before setting a value. Further, we don't want to stringify the IP address related values as they are now properly strings via Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aec118eb |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
imx6/imx7: Remove now empty imx6_spl.h and imx7_spl.h There are now no flags being set in these files, so remove them. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
This contributor prefers not to receive mails <noreply@example.com> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
dd11fdc3 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_USB_FLAGS et al to CFG Perform simple renames of: CONFIG_MXC_USB_FLAGS to CFG_MXC_USB_FLAGS CONFIG_MXC_USB_PORT to CFG_MXC_USB_PORT CONFIG_MXC_USB_PORTSC to CFG_MXC_USB_PORTSC Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
4db38665 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_UART_BASE to CFG Perform a simple rename of CONFIG_MXC_UART_BASE to CFG_MXC_UART_BASE Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0613c36a |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_EXTRA_ENV_SETTINGS to CFG Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
54f80dd2 |
|
02-Dec-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_HOSTNAME et al to Kconfig This converts the following to Kconfig: CONFIG_GATEWAYIP CONFIG_HOSTNAME CONFIG_IPADDR CONFIG_NETMASK CONFIG_ROOTPATH CONFIG_SERVERIP CONFIG_UBOOTPATH To do this, we introduce a CONFIG_USE_ form of each of the above and change include/env_default.h to test for that to be set before setting a value. Further, we don't want to stringify the IP address related values as they are now properly strings via Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aec118eb |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
imx6/imx7: Remove now empty imx6_spl.h and imx7_spl.h There are now no flags being set in these files, so remove them. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
This contributor prefers not to receive mails <noreply@example.com> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
dd11fdc3 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_USB_FLAGS et al to CFG Perform simple renames of: CONFIG_MXC_USB_FLAGS to CFG_MXC_USB_FLAGS CONFIG_MXC_USB_PORT to CFG_MXC_USB_PORT CONFIG_MXC_USB_PORTSC to CFG_MXC_USB_PORTSC Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
4db38665 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_UART_BASE to CFG Perform a simple rename of CONFIG_MXC_UART_BASE to CFG_MXC_UART_BASE Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0613c36a |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_EXTRA_ENV_SETTINGS to CFG Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
54f80dd2 |
|
02-Dec-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_HOSTNAME et al to Kconfig This converts the following to Kconfig: CONFIG_GATEWAYIP CONFIG_HOSTNAME CONFIG_IPADDR CONFIG_NETMASK CONFIG_ROOTPATH CONFIG_SERVERIP CONFIG_UBOOTPATH To do this, we introduce a CONFIG_USE_ form of each of the above and change include/env_default.h to test for that to be set before setting a value. Further, we don't want to stringify the IP address related values as they are now properly strings via Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aec118eb |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
imx6/imx7: Remove now empty imx6_spl.h and imx7_spl.h There are now no flags being set in these files, so remove them. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
This contributor prefers not to receive mails <noreply@example.com> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
dd11fdc3 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_USB_FLAGS et al to CFG Perform simple renames of: CONFIG_MXC_USB_FLAGS to CFG_MXC_USB_FLAGS CONFIG_MXC_USB_PORT to CFG_MXC_USB_PORT CONFIG_MXC_USB_PORTSC to CFG_MXC_USB_PORTSC Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
4db38665 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_UART_BASE to CFG Perform a simple rename of CONFIG_MXC_UART_BASE to CFG_MXC_UART_BASE Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0613c36a |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_EXTRA_ENV_SETTINGS to CFG Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
54f80dd2 |
|
02-Dec-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_HOSTNAME et al to Kconfig This converts the following to Kconfig: CONFIG_GATEWAYIP CONFIG_HOSTNAME CONFIG_IPADDR CONFIG_NETMASK CONFIG_ROOTPATH CONFIG_SERVERIP CONFIG_UBOOTPATH To do this, we introduce a CONFIG_USE_ form of each of the above and change include/env_default.h to test for that to be set before setting a value. Further, we don't want to stringify the IP address related values as they are now properly strings via Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aec118eb |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
imx6/imx7: Remove now empty imx6_spl.h and imx7_spl.h There are now no flags being set in these files, so remove them. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
This contributor prefers not to receive mails <noreply@example.com> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
dd11fdc3 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_USB_FLAGS et al to CFG Perform simple renames of: CONFIG_MXC_USB_FLAGS to CFG_MXC_USB_FLAGS CONFIG_MXC_USB_PORT to CFG_MXC_USB_PORT CONFIG_MXC_USB_PORTSC to CFG_MXC_USB_PORTSC Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
4db38665 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_UART_BASE to CFG Perform a simple rename of CONFIG_MXC_UART_BASE to CFG_MXC_UART_BASE Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0613c36a |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_EXTRA_ENV_SETTINGS to CFG Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
54f80dd2 |
|
02-Dec-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_HOSTNAME et al to Kconfig This converts the following to Kconfig: CONFIG_GATEWAYIP CONFIG_HOSTNAME CONFIG_IPADDR CONFIG_NETMASK CONFIG_ROOTPATH CONFIG_SERVERIP CONFIG_UBOOTPATH To do this, we introduce a CONFIG_USE_ form of each of the above and change include/env_default.h to test for that to be set before setting a value. Further, we don't want to stringify the IP address related values as they are now properly strings via Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aec118eb |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
imx6/imx7: Remove now empty imx6_spl.h and imx7_spl.h There are now no flags being set in these files, so remove them. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
This contributor prefers not to receive mails <noreply@example.com> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
dd11fdc3 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_USB_FLAGS et al to CFG Perform simple renames of: CONFIG_MXC_USB_FLAGS to CFG_MXC_USB_FLAGS CONFIG_MXC_USB_PORT to CFG_MXC_USB_PORT CONFIG_MXC_USB_PORTSC to CFG_MXC_USB_PORTSC Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
4db38665 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_UART_BASE to CFG Perform a simple rename of CONFIG_MXC_UART_BASE to CFG_MXC_UART_BASE Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0613c36a |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_EXTRA_ENV_SETTINGS to CFG Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
54f80dd2 |
|
02-Dec-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_HOSTNAME et al to Kconfig This converts the following to Kconfig: CONFIG_GATEWAYIP CONFIG_HOSTNAME CONFIG_IPADDR CONFIG_NETMASK CONFIG_ROOTPATH CONFIG_SERVERIP CONFIG_UBOOTPATH To do this, we introduce a CONFIG_USE_ form of each of the above and change include/env_default.h to test for that to be set before setting a value. Further, we don't want to stringify the IP address related values as they are now properly strings via Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aec118eb |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
imx6/imx7: Remove now empty imx6_spl.h and imx7_spl.h There are now no flags being set in these files, so remove them. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
This contributor prefers not to receive mails <noreply@example.com> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
dd11fdc3 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_USB_FLAGS et al to CFG Perform simple renames of: CONFIG_MXC_USB_FLAGS to CFG_MXC_USB_FLAGS CONFIG_MXC_USB_PORT to CFG_MXC_USB_PORT CONFIG_MXC_USB_PORTSC to CFG_MXC_USB_PORTSC Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
4db38665 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_UART_BASE to CFG Perform a simple rename of CONFIG_MXC_UART_BASE to CFG_MXC_UART_BASE Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0613c36a |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_EXTRA_ENV_SETTINGS to CFG Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
54f80dd2 |
|
02-Dec-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_HOSTNAME et al to Kconfig This converts the following to Kconfig: CONFIG_GATEWAYIP CONFIG_HOSTNAME CONFIG_IPADDR CONFIG_NETMASK CONFIG_ROOTPATH CONFIG_SERVERIP CONFIG_UBOOTPATH To do this, we introduce a CONFIG_USE_ form of each of the above and change include/env_default.h to test for that to be set before setting a value. Further, we don't want to stringify the IP address related values as they are now properly strings via Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aec118eb |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
imx6/imx7: Remove now empty imx6_spl.h and imx7_spl.h There are now no flags being set in these files, so remove them. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
This contributor prefers not to receive mails <noreply@example.com> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
dd11fdc3 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_USB_FLAGS et al to CFG Perform simple renames of: CONFIG_MXC_USB_FLAGS to CFG_MXC_USB_FLAGS CONFIG_MXC_USB_PORT to CFG_MXC_USB_PORT CONFIG_MXC_USB_PORTSC to CFG_MXC_USB_PORTSC Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
4db38665 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_UART_BASE to CFG Perform a simple rename of CONFIG_MXC_UART_BASE to CFG_MXC_UART_BASE Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0613c36a |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_EXTRA_ENV_SETTINGS to CFG Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
54f80dd2 |
|
02-Dec-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_HOSTNAME et al to Kconfig This converts the following to Kconfig: CONFIG_GATEWAYIP CONFIG_HOSTNAME CONFIG_IPADDR CONFIG_NETMASK CONFIG_ROOTPATH CONFIG_SERVERIP CONFIG_UBOOTPATH To do this, we introduce a CONFIG_USE_ form of each of the above and change include/env_default.h to test for that to be set before setting a value. Further, we don't want to stringify the IP address related values as they are now properly strings via Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aec118eb |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
imx6/imx7: Remove now empty imx6_spl.h and imx7_spl.h There are now no flags being set in these files, so remove them. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
This contributor prefers not to receive mails <noreply@example.com> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
dd11fdc3 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_USB_FLAGS et al to CFG Perform simple renames of: CONFIG_MXC_USB_FLAGS to CFG_MXC_USB_FLAGS CONFIG_MXC_USB_PORT to CFG_MXC_USB_PORT CONFIG_MXC_USB_PORTSC to CFG_MXC_USB_PORTSC Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
4db38665 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_UART_BASE to CFG Perform a simple rename of CONFIG_MXC_UART_BASE to CFG_MXC_UART_BASE Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0613c36a |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_EXTRA_ENV_SETTINGS to CFG Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
54f80dd2 |
|
02-Dec-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_HOSTNAME et al to Kconfig This converts the following to Kconfig: CONFIG_GATEWAYIP CONFIG_HOSTNAME CONFIG_IPADDR CONFIG_NETMASK CONFIG_ROOTPATH CONFIG_SERVERIP CONFIG_UBOOTPATH To do this, we introduce a CONFIG_USE_ form of each of the above and change include/env_default.h to test for that to be set before setting a value. Further, we don't want to stringify the IP address related values as they are now properly strings via Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aec118eb |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
imx6/imx7: Remove now empty imx6_spl.h and imx7_spl.h There are now no flags being set in these files, so remove them. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
This contributor prefers not to receive mails <noreply@example.com> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
dd11fdc3 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_USB_FLAGS et al to CFG Perform simple renames of: CONFIG_MXC_USB_FLAGS to CFG_MXC_USB_FLAGS CONFIG_MXC_USB_PORT to CFG_MXC_USB_PORT CONFIG_MXC_USB_PORTSC to CFG_MXC_USB_PORTSC Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
4db38665 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_UART_BASE to CFG Perform a simple rename of CONFIG_MXC_UART_BASE to CFG_MXC_UART_BASE Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0613c36a |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_EXTRA_ENV_SETTINGS to CFG Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
54f80dd2 |
|
02-Dec-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_HOSTNAME et al to Kconfig This converts the following to Kconfig: CONFIG_GATEWAYIP CONFIG_HOSTNAME CONFIG_IPADDR CONFIG_NETMASK CONFIG_ROOTPATH CONFIG_SERVERIP CONFIG_UBOOTPATH To do this, we introduce a CONFIG_USE_ form of each of the above and change include/env_default.h to test for that to be set before setting a value. Further, we don't want to stringify the IP address related values as they are now properly strings via Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aec118eb |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
imx6/imx7: Remove now empty imx6_spl.h and imx7_spl.h There are now no flags being set in these files, so remove them. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
This contributor prefers not to receive mails <noreply@example.com> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
dd11fdc3 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_USB_FLAGS et al to CFG Perform simple renames of: CONFIG_MXC_USB_FLAGS to CFG_MXC_USB_FLAGS CONFIG_MXC_USB_PORT to CFG_MXC_USB_PORT CONFIG_MXC_USB_PORTSC to CFG_MXC_USB_PORTSC Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
4db38665 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_UART_BASE to CFG Perform a simple rename of CONFIG_MXC_UART_BASE to CFG_MXC_UART_BASE Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0613c36a |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_EXTRA_ENV_SETTINGS to CFG Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
54f80dd2 |
|
02-Dec-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_HOSTNAME et al to Kconfig This converts the following to Kconfig: CONFIG_GATEWAYIP CONFIG_HOSTNAME CONFIG_IPADDR CONFIG_NETMASK CONFIG_ROOTPATH CONFIG_SERVERIP CONFIG_UBOOTPATH To do this, we introduce a CONFIG_USE_ form of each of the above and change include/env_default.h to test for that to be set before setting a value. Further, we don't want to stringify the IP address related values as they are now properly strings via Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aec118eb |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
imx6/imx7: Remove now empty imx6_spl.h and imx7_spl.h There are now no flags being set in these files, so remove them. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
This contributor prefers not to receive mails <noreply@example.com> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
dd11fdc3 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_USB_FLAGS et al to CFG Perform simple renames of: CONFIG_MXC_USB_FLAGS to CFG_MXC_USB_FLAGS CONFIG_MXC_USB_PORT to CFG_MXC_USB_PORT CONFIG_MXC_USB_PORTSC to CFG_MXC_USB_PORTSC Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
4db38665 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_UART_BASE to CFG Perform a simple rename of CONFIG_MXC_UART_BASE to CFG_MXC_UART_BASE Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0613c36a |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_EXTRA_ENV_SETTINGS to CFG Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
54f80dd2 |
|
02-Dec-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_HOSTNAME et al to Kconfig This converts the following to Kconfig: CONFIG_GATEWAYIP CONFIG_HOSTNAME CONFIG_IPADDR CONFIG_NETMASK CONFIG_ROOTPATH CONFIG_SERVERIP CONFIG_UBOOTPATH To do this, we introduce a CONFIG_USE_ form of each of the above and change include/env_default.h to test for that to be set before setting a value. Further, we don't want to stringify the IP address related values as they are now properly strings via Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aec118eb |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
imx6/imx7: Remove now empty imx6_spl.h and imx7_spl.h There are now no flags being set in these files, so remove them. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
This contributor prefers not to receive mails <noreply@example.com> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
dd11fdc3 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_USB_FLAGS et al to CFG Perform simple renames of: CONFIG_MXC_USB_FLAGS to CFG_MXC_USB_FLAGS CONFIG_MXC_USB_PORT to CFG_MXC_USB_PORT CONFIG_MXC_USB_PORTSC to CFG_MXC_USB_PORTSC Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
4db38665 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_UART_BASE to CFG Perform a simple rename of CONFIG_MXC_UART_BASE to CFG_MXC_UART_BASE Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0613c36a |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_EXTRA_ENV_SETTINGS to CFG Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
54f80dd2 |
|
02-Dec-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_HOSTNAME et al to Kconfig This converts the following to Kconfig: CONFIG_GATEWAYIP CONFIG_HOSTNAME CONFIG_IPADDR CONFIG_NETMASK CONFIG_ROOTPATH CONFIG_SERVERIP CONFIG_UBOOTPATH To do this, we introduce a CONFIG_USE_ form of each of the above and change include/env_default.h to test for that to be set before setting a value. Further, we don't want to stringify the IP address related values as they are now properly strings via Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aec118eb |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
imx6/imx7: Remove now empty imx6_spl.h and imx7_spl.h There are now no flags being set in these files, so remove them. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
This contributor prefers not to receive mails <noreply@example.com> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
dd11fdc3 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_USB_FLAGS et al to CFG Perform simple renames of: CONFIG_MXC_USB_FLAGS to CFG_MXC_USB_FLAGS CONFIG_MXC_USB_PORT to CFG_MXC_USB_PORT CONFIG_MXC_USB_PORTSC to CFG_MXC_USB_PORTSC Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
4db38665 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_UART_BASE to CFG Perform a simple rename of CONFIG_MXC_UART_BASE to CFG_MXC_UART_BASE Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0613c36a |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_EXTRA_ENV_SETTINGS to CFG Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
54f80dd2 |
|
02-Dec-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_HOSTNAME et al to Kconfig This converts the following to Kconfig: CONFIG_GATEWAYIP CONFIG_HOSTNAME CONFIG_IPADDR CONFIG_NETMASK CONFIG_ROOTPATH CONFIG_SERVERIP CONFIG_UBOOTPATH To do this, we introduce a CONFIG_USE_ form of each of the above and change include/env_default.h to test for that to be set before setting a value. Further, we don't want to stringify the IP address related values as they are now properly strings via Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aec118eb |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
imx6/imx7: Remove now empty imx6_spl.h and imx7_spl.h There are now no flags being set in these files, so remove them. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
This contributor prefers not to receive mails <noreply@example.com> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
dd11fdc3 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_USB_FLAGS et al to CFG Perform simple renames of: CONFIG_MXC_USB_FLAGS to CFG_MXC_USB_FLAGS CONFIG_MXC_USB_PORT to CFG_MXC_USB_PORT CONFIG_MXC_USB_PORTSC to CFG_MXC_USB_PORTSC Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
4db38665 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_UART_BASE to CFG Perform a simple rename of CONFIG_MXC_UART_BASE to CFG_MXC_UART_BASE Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0613c36a |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_EXTRA_ENV_SETTINGS to CFG Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
54f80dd2 |
|
02-Dec-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_HOSTNAME et al to Kconfig This converts the following to Kconfig: CONFIG_GATEWAYIP CONFIG_HOSTNAME CONFIG_IPADDR CONFIG_NETMASK CONFIG_ROOTPATH CONFIG_SERVERIP CONFIG_UBOOTPATH To do this, we introduce a CONFIG_USE_ form of each of the above and change include/env_default.h to test for that to be set before setting a value. Further, we don't want to stringify the IP address related values as they are now properly strings via Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aec118eb |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
imx6/imx7: Remove now empty imx6_spl.h and imx7_spl.h There are now no flags being set in these files, so remove them. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
This contributor prefers not to receive mails <noreply@example.com> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
dd11fdc3 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_USB_FLAGS et al to CFG Perform simple renames of: CONFIG_MXC_USB_FLAGS to CFG_MXC_USB_FLAGS CONFIG_MXC_USB_PORT to CFG_MXC_USB_PORT CONFIG_MXC_USB_PORTSC to CFG_MXC_USB_PORTSC Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
4db38665 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_UART_BASE to CFG Perform a simple rename of CONFIG_MXC_UART_BASE to CFG_MXC_UART_BASE Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0613c36a |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_EXTRA_ENV_SETTINGS to CFG Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
54f80dd2 |
|
02-Dec-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_HOSTNAME et al to Kconfig This converts the following to Kconfig: CONFIG_GATEWAYIP CONFIG_HOSTNAME CONFIG_IPADDR CONFIG_NETMASK CONFIG_ROOTPATH CONFIG_SERVERIP CONFIG_UBOOTPATH To do this, we introduce a CONFIG_USE_ form of each of the above and change include/env_default.h to test for that to be set before setting a value. Further, we don't want to stringify the IP address related values as they are now properly strings via Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aec118eb |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
imx6/imx7: Remove now empty imx6_spl.h and imx7_spl.h There are now no flags being set in these files, so remove them. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
This contributor prefers not to receive mails <noreply@example.com> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
dd11fdc3 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_USB_FLAGS et al to CFG Perform simple renames of: CONFIG_MXC_USB_FLAGS to CFG_MXC_USB_FLAGS CONFIG_MXC_USB_PORT to CFG_MXC_USB_PORT CONFIG_MXC_USB_PORTSC to CFG_MXC_USB_PORTSC Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
4db38665 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_UART_BASE to CFG Perform a simple rename of CONFIG_MXC_UART_BASE to CFG_MXC_UART_BASE Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0613c36a |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_EXTRA_ENV_SETTINGS to CFG Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
54f80dd2 |
|
02-Dec-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_HOSTNAME et al to Kconfig This converts the following to Kconfig: CONFIG_GATEWAYIP CONFIG_HOSTNAME CONFIG_IPADDR CONFIG_NETMASK CONFIG_ROOTPATH CONFIG_SERVERIP CONFIG_UBOOTPATH To do this, we introduce a CONFIG_USE_ form of each of the above and change include/env_default.h to test for that to be set before setting a value. Further, we don't want to stringify the IP address related values as they are now properly strings via Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aec118eb |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
imx6/imx7: Remove now empty imx6_spl.h and imx7_spl.h There are now no flags being set in these files, so remove them. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
This contributor prefers not to receive mails <noreply@example.com> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
dd11fdc3 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_USB_FLAGS et al to CFG Perform simple renames of: CONFIG_MXC_USB_FLAGS to CFG_MXC_USB_FLAGS CONFIG_MXC_USB_PORT to CFG_MXC_USB_PORT CONFIG_MXC_USB_PORTSC to CFG_MXC_USB_PORTSC Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
4db38665 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_UART_BASE to CFG Perform a simple rename of CONFIG_MXC_UART_BASE to CFG_MXC_UART_BASE Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0613c36a |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_EXTRA_ENV_SETTINGS to CFG Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
54f80dd2 |
|
02-Dec-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_HOSTNAME et al to Kconfig This converts the following to Kconfig: CONFIG_GATEWAYIP CONFIG_HOSTNAME CONFIG_IPADDR CONFIG_NETMASK CONFIG_ROOTPATH CONFIG_SERVERIP CONFIG_UBOOTPATH To do this, we introduce a CONFIG_USE_ form of each of the above and change include/env_default.h to test for that to be set before setting a value. Further, we don't want to stringify the IP address related values as they are now properly strings via Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aec118eb |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
imx6/imx7: Remove now empty imx6_spl.h and imx7_spl.h There are now no flags being set in these files, so remove them. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
This contributor prefers not to receive mails <noreply@example.com> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
dd11fdc3 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_USB_FLAGS et al to CFG Perform simple renames of: CONFIG_MXC_USB_FLAGS to CFG_MXC_USB_FLAGS CONFIG_MXC_USB_PORT to CFG_MXC_USB_PORT CONFIG_MXC_USB_PORTSC to CFG_MXC_USB_PORTSC Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
4db38665 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_UART_BASE to CFG Perform a simple rename of CONFIG_MXC_UART_BASE to CFG_MXC_UART_BASE Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0613c36a |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_EXTRA_ENV_SETTINGS to CFG Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
54f80dd2 |
|
02-Dec-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_HOSTNAME et al to Kconfig This converts the following to Kconfig: CONFIG_GATEWAYIP CONFIG_HOSTNAME CONFIG_IPADDR CONFIG_NETMASK CONFIG_ROOTPATH CONFIG_SERVERIP CONFIG_UBOOTPATH To do this, we introduce a CONFIG_USE_ form of each of the above and change include/env_default.h to test for that to be set before setting a value. Further, we don't want to stringify the IP address related values as they are now properly strings via Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aec118eb |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
imx6/imx7: Remove now empty imx6_spl.h and imx7_spl.h There are now no flags being set in these files, so remove them. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
This contributor prefers not to receive mails <noreply@example.com> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
dd11fdc3 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_USB_FLAGS et al to CFG Perform simple renames of: CONFIG_MXC_USB_FLAGS to CFG_MXC_USB_FLAGS CONFIG_MXC_USB_PORT to CFG_MXC_USB_PORT CONFIG_MXC_USB_PORTSC to CFG_MXC_USB_PORTSC Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
4db38665 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_UART_BASE to CFG Perform a simple rename of CONFIG_MXC_UART_BASE to CFG_MXC_UART_BASE Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0613c36a |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_EXTRA_ENV_SETTINGS to CFG Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
54f80dd2 |
|
02-Dec-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_HOSTNAME et al to Kconfig This converts the following to Kconfig: CONFIG_GATEWAYIP CONFIG_HOSTNAME CONFIG_IPADDR CONFIG_NETMASK CONFIG_ROOTPATH CONFIG_SERVERIP CONFIG_UBOOTPATH To do this, we introduce a CONFIG_USE_ form of each of the above and change include/env_default.h to test for that to be set before setting a value. Further, we don't want to stringify the IP address related values as they are now properly strings via Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aec118eb |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
imx6/imx7: Remove now empty imx6_spl.h and imx7_spl.h There are now no flags being set in these files, so remove them. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
This contributor prefers not to receive mails <noreply@example.com> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
dd11fdc3 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_USB_FLAGS et al to CFG Perform simple renames of: CONFIG_MXC_USB_FLAGS to CFG_MXC_USB_FLAGS CONFIG_MXC_USB_PORT to CFG_MXC_USB_PORT CONFIG_MXC_USB_PORTSC to CFG_MXC_USB_PORTSC Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
4db38665 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_UART_BASE to CFG Perform a simple rename of CONFIG_MXC_UART_BASE to CFG_MXC_UART_BASE Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0613c36a |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_EXTRA_ENV_SETTINGS to CFG Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
54f80dd2 |
|
02-Dec-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_HOSTNAME et al to Kconfig This converts the following to Kconfig: CONFIG_GATEWAYIP CONFIG_HOSTNAME CONFIG_IPADDR CONFIG_NETMASK CONFIG_ROOTPATH CONFIG_SERVERIP CONFIG_UBOOTPATH To do this, we introduce a CONFIG_USE_ form of each of the above and change include/env_default.h to test for that to be set before setting a value. Further, we don't want to stringify the IP address related values as they are now properly strings via Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aec118eb |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
imx6/imx7: Remove now empty imx6_spl.h and imx7_spl.h There are now no flags being set in these files, so remove them. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
This contributor prefers not to receive mails <noreply@example.com> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
dd11fdc3 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_USB_FLAGS et al to CFG Perform simple renames of: CONFIG_MXC_USB_FLAGS to CFG_MXC_USB_FLAGS CONFIG_MXC_USB_PORT to CFG_MXC_USB_PORT CONFIG_MXC_USB_PORTSC to CFG_MXC_USB_PORTSC Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
4db38665 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_UART_BASE to CFG Perform a simple rename of CONFIG_MXC_UART_BASE to CFG_MXC_UART_BASE Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0613c36a |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_EXTRA_ENV_SETTINGS to CFG Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
54f80dd2 |
|
02-Dec-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_HOSTNAME et al to Kconfig This converts the following to Kconfig: CONFIG_GATEWAYIP CONFIG_HOSTNAME CONFIG_IPADDR CONFIG_NETMASK CONFIG_ROOTPATH CONFIG_SERVERIP CONFIG_UBOOTPATH To do this, we introduce a CONFIG_USE_ form of each of the above and change include/env_default.h to test for that to be set before setting a value. Further, we don't want to stringify the IP address related values as they are now properly strings via Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aec118eb |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
imx6/imx7: Remove now empty imx6_spl.h and imx7_spl.h There are now no flags being set in these files, so remove them. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
This contributor prefers not to receive mails <noreply@example.com> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
dd11fdc3 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_USB_FLAGS et al to CFG Perform simple renames of: CONFIG_MXC_USB_FLAGS to CFG_MXC_USB_FLAGS CONFIG_MXC_USB_PORT to CFG_MXC_USB_PORT CONFIG_MXC_USB_PORTSC to CFG_MXC_USB_PORTSC Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
4db38665 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_UART_BASE to CFG Perform a simple rename of CONFIG_MXC_UART_BASE to CFG_MXC_UART_BASE Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0613c36a |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_EXTRA_ENV_SETTINGS to CFG Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
54f80dd2 |
|
02-Dec-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_HOSTNAME et al to Kconfig This converts the following to Kconfig: CONFIG_GATEWAYIP CONFIG_HOSTNAME CONFIG_IPADDR CONFIG_NETMASK CONFIG_ROOTPATH CONFIG_SERVERIP CONFIG_UBOOTPATH To do this, we introduce a CONFIG_USE_ form of each of the above and change include/env_default.h to test for that to be set before setting a value. Further, we don't want to stringify the IP address related values as they are now properly strings via Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aec118eb |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
imx6/imx7: Remove now empty imx6_spl.h and imx7_spl.h There are now no flags being set in these files, so remove them. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
This contributor prefers not to receive mails <noreply@example.com> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
dd11fdc3 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_USB_FLAGS et al to CFG Perform simple renames of: CONFIG_MXC_USB_FLAGS to CFG_MXC_USB_FLAGS CONFIG_MXC_USB_PORT to CFG_MXC_USB_PORT CONFIG_MXC_USB_PORTSC to CFG_MXC_USB_PORTSC Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
4db38665 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_UART_BASE to CFG Perform a simple rename of CONFIG_MXC_UART_BASE to CFG_MXC_UART_BASE Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0613c36a |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_EXTRA_ENV_SETTINGS to CFG Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
54f80dd2 |
|
02-Dec-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_HOSTNAME et al to Kconfig This converts the following to Kconfig: CONFIG_GATEWAYIP CONFIG_HOSTNAME CONFIG_IPADDR CONFIG_NETMASK CONFIG_ROOTPATH CONFIG_SERVERIP CONFIG_UBOOTPATH To do this, we introduce a CONFIG_USE_ form of each of the above and change include/env_default.h to test for that to be set before setting a value. Further, we don't want to stringify the IP address related values as they are now properly strings via Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aec118eb |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
imx6/imx7: Remove now empty imx6_spl.h and imx7_spl.h There are now no flags being set in these files, so remove them. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
This contributor prefers not to receive mails <noreply@example.com> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
dd11fdc3 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_USB_FLAGS et al to CFG Perform simple renames of: CONFIG_MXC_USB_FLAGS to CFG_MXC_USB_FLAGS CONFIG_MXC_USB_PORT to CFG_MXC_USB_PORT CONFIG_MXC_USB_PORTSC to CFG_MXC_USB_PORTSC Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
4db38665 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_UART_BASE to CFG Perform a simple rename of CONFIG_MXC_UART_BASE to CFG_MXC_UART_BASE Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0613c36a |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_EXTRA_ENV_SETTINGS to CFG Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
54f80dd2 |
|
02-Dec-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_HOSTNAME et al to Kconfig This converts the following to Kconfig: CONFIG_GATEWAYIP CONFIG_HOSTNAME CONFIG_IPADDR CONFIG_NETMASK CONFIG_ROOTPATH CONFIG_SERVERIP CONFIG_UBOOTPATH To do this, we introduce a CONFIG_USE_ form of each of the above and change include/env_default.h to test for that to be set before setting a value. Further, we don't want to stringify the IP address related values as they are now properly strings via Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aec118eb |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
imx6/imx7: Remove now empty imx6_spl.h and imx7_spl.h There are now no flags being set in these files, so remove them. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
This contributor prefers not to receive mails <noreply@example.com> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
dd11fdc3 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_USB_FLAGS et al to CFG Perform simple renames of: CONFIG_MXC_USB_FLAGS to CFG_MXC_USB_FLAGS CONFIG_MXC_USB_PORT to CFG_MXC_USB_PORT CONFIG_MXC_USB_PORTSC to CFG_MXC_USB_PORTSC Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
4db38665 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_UART_BASE to CFG Perform a simple rename of CONFIG_MXC_UART_BASE to CFG_MXC_UART_BASE Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0613c36a |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_EXTRA_ENV_SETTINGS to CFG Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
54f80dd2 |
|
02-Dec-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_HOSTNAME et al to Kconfig This converts the following to Kconfig: CONFIG_GATEWAYIP CONFIG_HOSTNAME CONFIG_IPADDR CONFIG_NETMASK CONFIG_ROOTPATH CONFIG_SERVERIP CONFIG_UBOOTPATH To do this, we introduce a CONFIG_USE_ form of each of the above and change include/env_default.h to test for that to be set before setting a value. Further, we don't want to stringify the IP address related values as they are now properly strings via Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aec118eb |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
imx6/imx7: Remove now empty imx6_spl.h and imx7_spl.h There are now no flags being set in these files, so remove them. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
This contributor prefers not to receive mails <noreply@example.com> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
dd11fdc3 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_USB_FLAGS et al to CFG Perform simple renames of: CONFIG_MXC_USB_FLAGS to CFG_MXC_USB_FLAGS CONFIG_MXC_USB_PORT to CFG_MXC_USB_PORT CONFIG_MXC_USB_PORTSC to CFG_MXC_USB_PORTSC Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
4db38665 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_UART_BASE to CFG Perform a simple rename of CONFIG_MXC_UART_BASE to CFG_MXC_UART_BASE Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0613c36a |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_EXTRA_ENV_SETTINGS to CFG Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
54f80dd2 |
|
02-Dec-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_HOSTNAME et al to Kconfig This converts the following to Kconfig: CONFIG_GATEWAYIP CONFIG_HOSTNAME CONFIG_IPADDR CONFIG_NETMASK CONFIG_ROOTPATH CONFIG_SERVERIP CONFIG_UBOOTPATH To do this, we introduce a CONFIG_USE_ form of each of the above and change include/env_default.h to test for that to be set before setting a value. Further, we don't want to stringify the IP address related values as they are now properly strings via Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aec118eb |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
imx6/imx7: Remove now empty imx6_spl.h and imx7_spl.h There are now no flags being set in these files, so remove them. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
This contributor prefers not to receive mails <noreply@example.com> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
dd11fdc3 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_USB_FLAGS et al to CFG Perform simple renames of: CONFIG_MXC_USB_FLAGS to CFG_MXC_USB_FLAGS CONFIG_MXC_USB_PORT to CFG_MXC_USB_PORT CONFIG_MXC_USB_PORTSC to CFG_MXC_USB_PORTSC Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
4db38665 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_UART_BASE to CFG Perform a simple rename of CONFIG_MXC_UART_BASE to CFG_MXC_UART_BASE Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0613c36a |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_EXTRA_ENV_SETTINGS to CFG Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
54f80dd2 |
|
02-Dec-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_HOSTNAME et al to Kconfig This converts the following to Kconfig: CONFIG_GATEWAYIP CONFIG_HOSTNAME CONFIG_IPADDR CONFIG_NETMASK CONFIG_ROOTPATH CONFIG_SERVERIP CONFIG_UBOOTPATH To do this, we introduce a CONFIG_USE_ form of each of the above and change include/env_default.h to test for that to be set before setting a value. Further, we don't want to stringify the IP address related values as they are now properly strings via Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aec118eb |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
imx6/imx7: Remove now empty imx6_spl.h and imx7_spl.h There are now no flags being set in these files, so remove them. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
This contributor prefers not to receive mails <noreply@example.com> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
dd11fdc3 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_USB_FLAGS et al to CFG Perform simple renames of: CONFIG_MXC_USB_FLAGS to CFG_MXC_USB_FLAGS CONFIG_MXC_USB_PORT to CFG_MXC_USB_PORT CONFIG_MXC_USB_PORTSC to CFG_MXC_USB_PORTSC Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
4db38665 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_UART_BASE to CFG Perform a simple rename of CONFIG_MXC_UART_BASE to CFG_MXC_UART_BASE Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0613c36a |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_EXTRA_ENV_SETTINGS to CFG Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
54f80dd2 |
|
02-Dec-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_HOSTNAME et al to Kconfig This converts the following to Kconfig: CONFIG_GATEWAYIP CONFIG_HOSTNAME CONFIG_IPADDR CONFIG_NETMASK CONFIG_ROOTPATH CONFIG_SERVERIP CONFIG_UBOOTPATH To do this, we introduce a CONFIG_USE_ form of each of the above and change include/env_default.h to test for that to be set before setting a value. Further, we don't want to stringify the IP address related values as they are now properly strings via Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aec118eb |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
imx6/imx7: Remove now empty imx6_spl.h and imx7_spl.h There are now no flags being set in these files, so remove them. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
This contributor prefers not to receive mails <noreply@example.com> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
dd11fdc3 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_USB_FLAGS et al to CFG Perform simple renames of: CONFIG_MXC_USB_FLAGS to CFG_MXC_USB_FLAGS CONFIG_MXC_USB_PORT to CFG_MXC_USB_PORT CONFIG_MXC_USB_PORTSC to CFG_MXC_USB_PORTSC Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
4db38665 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_UART_BASE to CFG Perform a simple rename of CONFIG_MXC_UART_BASE to CFG_MXC_UART_BASE Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0613c36a |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_EXTRA_ENV_SETTINGS to CFG Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
54f80dd2 |
|
02-Dec-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_HOSTNAME et al to Kconfig This converts the following to Kconfig: CONFIG_GATEWAYIP CONFIG_HOSTNAME CONFIG_IPADDR CONFIG_NETMASK CONFIG_ROOTPATH CONFIG_SERVERIP CONFIG_UBOOTPATH To do this, we introduce a CONFIG_USE_ form of each of the above and change include/env_default.h to test for that to be set before setting a value. Further, we don't want to stringify the IP address related values as they are now properly strings via Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aec118eb |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
imx6/imx7: Remove now empty imx6_spl.h and imx7_spl.h There are now no flags being set in these files, so remove them. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
This contributor prefers not to receive mails <noreply@example.com> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
dd11fdc3 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_USB_FLAGS et al to CFG Perform simple renames of: CONFIG_MXC_USB_FLAGS to CFG_MXC_USB_FLAGS CONFIG_MXC_USB_PORT to CFG_MXC_USB_PORT CONFIG_MXC_USB_PORTSC to CFG_MXC_USB_PORTSC Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
4db38665 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_UART_BASE to CFG Perform a simple rename of CONFIG_MXC_UART_BASE to CFG_MXC_UART_BASE Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0613c36a |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_EXTRA_ENV_SETTINGS to CFG Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
54f80dd2 |
|
02-Dec-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_HOSTNAME et al to Kconfig This converts the following to Kconfig: CONFIG_GATEWAYIP CONFIG_HOSTNAME CONFIG_IPADDR CONFIG_NETMASK CONFIG_ROOTPATH CONFIG_SERVERIP CONFIG_UBOOTPATH To do this, we introduce a CONFIG_USE_ form of each of the above and change include/env_default.h to test for that to be set before setting a value. Further, we don't want to stringify the IP address related values as they are now properly strings via Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aec118eb |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
imx6/imx7: Remove now empty imx6_spl.h and imx7_spl.h There are now no flags being set in these files, so remove them. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
This contributor prefers not to receive mails <noreply@example.com> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
dd11fdc3 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_USB_FLAGS et al to CFG Perform simple renames of: CONFIG_MXC_USB_FLAGS to CFG_MXC_USB_FLAGS CONFIG_MXC_USB_PORT to CFG_MXC_USB_PORT CONFIG_MXC_USB_PORTSC to CFG_MXC_USB_PORTSC Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
4db38665 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_UART_BASE to CFG Perform a simple rename of CONFIG_MXC_UART_BASE to CFG_MXC_UART_BASE Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0613c36a |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_EXTRA_ENV_SETTINGS to CFG Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
54f80dd2 |
|
02-Dec-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_HOSTNAME et al to Kconfig This converts the following to Kconfig: CONFIG_GATEWAYIP CONFIG_HOSTNAME CONFIG_IPADDR CONFIG_NETMASK CONFIG_ROOTPATH CONFIG_SERVERIP CONFIG_UBOOTPATH To do this, we introduce a CONFIG_USE_ form of each of the above and change include/env_default.h to test for that to be set before setting a value. Further, we don't want to stringify the IP address related values as they are now properly strings via Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aec118eb |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
imx6/imx7: Remove now empty imx6_spl.h and imx7_spl.h There are now no flags being set in these files, so remove them. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
This contributor prefers not to receive mails <noreply@example.com> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
dd11fdc3 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_USB_FLAGS et al to CFG Perform simple renames of: CONFIG_MXC_USB_FLAGS to CFG_MXC_USB_FLAGS CONFIG_MXC_USB_PORT to CFG_MXC_USB_PORT CONFIG_MXC_USB_PORTSC to CFG_MXC_USB_PORTSC Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
4db38665 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_UART_BASE to CFG Perform a simple rename of CONFIG_MXC_UART_BASE to CFG_MXC_UART_BASE Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0613c36a |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_EXTRA_ENV_SETTINGS to CFG Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
54f80dd2 |
|
02-Dec-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_HOSTNAME et al to Kconfig This converts the following to Kconfig: CONFIG_GATEWAYIP CONFIG_HOSTNAME CONFIG_IPADDR CONFIG_NETMASK CONFIG_ROOTPATH CONFIG_SERVERIP CONFIG_UBOOTPATH To do this, we introduce a CONFIG_USE_ form of each of the above and change include/env_default.h to test for that to be set before setting a value. Further, we don't want to stringify the IP address related values as they are now properly strings via Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aec118eb |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
imx6/imx7: Remove now empty imx6_spl.h and imx7_spl.h There are now no flags being set in these files, so remove them. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
This contributor prefers not to receive mails <noreply@example.com> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
dd11fdc3 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_USB_FLAGS et al to CFG Perform simple renames of: CONFIG_MXC_USB_FLAGS to CFG_MXC_USB_FLAGS CONFIG_MXC_USB_PORT to CFG_MXC_USB_PORT CONFIG_MXC_USB_PORTSC to CFG_MXC_USB_PORTSC Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
4db38665 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_UART_BASE to CFG Perform a simple rename of CONFIG_MXC_UART_BASE to CFG_MXC_UART_BASE Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0613c36a |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_EXTRA_ENV_SETTINGS to CFG Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
54f80dd2 |
|
02-Dec-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_HOSTNAME et al to Kconfig This converts the following to Kconfig: CONFIG_GATEWAYIP CONFIG_HOSTNAME CONFIG_IPADDR CONFIG_NETMASK CONFIG_ROOTPATH CONFIG_SERVERIP CONFIG_UBOOTPATH To do this, we introduce a CONFIG_USE_ form of each of the above and change include/env_default.h to test for that to be set before setting a value. Further, we don't want to stringify the IP address related values as they are now properly strings via Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aec118eb |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
imx6/imx7: Remove now empty imx6_spl.h and imx7_spl.h There are now no flags being set in these files, so remove them. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
This contributor prefers not to receive mails <noreply@example.com> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
dd11fdc3 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_USB_FLAGS et al to CFG Perform simple renames of: CONFIG_MXC_USB_FLAGS to CFG_MXC_USB_FLAGS CONFIG_MXC_USB_PORT to CFG_MXC_USB_PORT CONFIG_MXC_USB_PORTSC to CFG_MXC_USB_PORTSC Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
4db38665 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_UART_BASE to CFG Perform a simple rename of CONFIG_MXC_UART_BASE to CFG_MXC_UART_BASE Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0613c36a |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_EXTRA_ENV_SETTINGS to CFG Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
54f80dd2 |
|
02-Dec-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_HOSTNAME et al to Kconfig This converts the following to Kconfig: CONFIG_GATEWAYIP CONFIG_HOSTNAME CONFIG_IPADDR CONFIG_NETMASK CONFIG_ROOTPATH CONFIG_SERVERIP CONFIG_UBOOTPATH To do this, we introduce a CONFIG_USE_ form of each of the above and change include/env_default.h to test for that to be set before setting a value. Further, we don't want to stringify the IP address related values as they are now properly strings via Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aec118eb |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
imx6/imx7: Remove now empty imx6_spl.h and imx7_spl.h There are now no flags being set in these files, so remove them. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
This contributor prefers not to receive mails <noreply@example.com> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
dd11fdc3 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_USB_FLAGS et al to CFG Perform simple renames of: CONFIG_MXC_USB_FLAGS to CFG_MXC_USB_FLAGS CONFIG_MXC_USB_PORT to CFG_MXC_USB_PORT CONFIG_MXC_USB_PORTSC to CFG_MXC_USB_PORTSC Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
4db38665 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_UART_BASE to CFG Perform a simple rename of CONFIG_MXC_UART_BASE to CFG_MXC_UART_BASE Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0613c36a |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_EXTRA_ENV_SETTINGS to CFG Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
54f80dd2 |
|
02-Dec-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_HOSTNAME et al to Kconfig This converts the following to Kconfig: CONFIG_GATEWAYIP CONFIG_HOSTNAME CONFIG_IPADDR CONFIG_NETMASK CONFIG_ROOTPATH CONFIG_SERVERIP CONFIG_UBOOTPATH To do this, we introduce a CONFIG_USE_ form of each of the above and change include/env_default.h to test for that to be set before setting a value. Further, we don't want to stringify the IP address related values as they are now properly strings via Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aec118eb |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
imx6/imx7: Remove now empty imx6_spl.h and imx7_spl.h There are now no flags being set in these files, so remove them. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
This contributor prefers not to receive mails <noreply@example.com> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
dd11fdc3 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_USB_FLAGS et al to CFG Perform simple renames of: CONFIG_MXC_USB_FLAGS to CFG_MXC_USB_FLAGS CONFIG_MXC_USB_PORT to CFG_MXC_USB_PORT CONFIG_MXC_USB_PORTSC to CFG_MXC_USB_PORTSC Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
4db38665 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_UART_BASE to CFG Perform a simple rename of CONFIG_MXC_UART_BASE to CFG_MXC_UART_BASE Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0613c36a |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_EXTRA_ENV_SETTINGS to CFG Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
54f80dd2 |
|
02-Dec-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_HOSTNAME et al to Kconfig This converts the following to Kconfig: CONFIG_GATEWAYIP CONFIG_HOSTNAME CONFIG_IPADDR CONFIG_NETMASK CONFIG_ROOTPATH CONFIG_SERVERIP CONFIG_UBOOTPATH To do this, we introduce a CONFIG_USE_ form of each of the above and change include/env_default.h to test for that to be set before setting a value. Further, we don't want to stringify the IP address related values as they are now properly strings via Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aec118eb |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
imx6/imx7: Remove now empty imx6_spl.h and imx7_spl.h There are now no flags being set in these files, so remove them. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
This contributor prefers not to receive mails <noreply@example.com> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
dd11fdc3 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_USB_FLAGS et al to CFG Perform simple renames of: CONFIG_MXC_USB_FLAGS to CFG_MXC_USB_FLAGS CONFIG_MXC_USB_PORT to CFG_MXC_USB_PORT CONFIG_MXC_USB_PORTSC to CFG_MXC_USB_PORTSC Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
4db38665 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_UART_BASE to CFG Perform a simple rename of CONFIG_MXC_UART_BASE to CFG_MXC_UART_BASE Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0613c36a |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_EXTRA_ENV_SETTINGS to CFG Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
54f80dd2 |
|
02-Dec-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_HOSTNAME et al to Kconfig This converts the following to Kconfig: CONFIG_GATEWAYIP CONFIG_HOSTNAME CONFIG_IPADDR CONFIG_NETMASK CONFIG_ROOTPATH CONFIG_SERVERIP CONFIG_UBOOTPATH To do this, we introduce a CONFIG_USE_ form of each of the above and change include/env_default.h to test for that to be set before setting a value. Further, we don't want to stringify the IP address related values as they are now properly strings via Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aec118eb |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
imx6/imx7: Remove now empty imx6_spl.h and imx7_spl.h There are now no flags being set in these files, so remove them. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
This contributor prefers not to receive mails <noreply@example.com> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
dd11fdc3 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_USB_FLAGS et al to CFG Perform simple renames of: CONFIG_MXC_USB_FLAGS to CFG_MXC_USB_FLAGS CONFIG_MXC_USB_PORT to CFG_MXC_USB_PORT CONFIG_MXC_USB_PORTSC to CFG_MXC_USB_PORTSC Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
4db38665 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_UART_BASE to CFG Perform a simple rename of CONFIG_MXC_UART_BASE to CFG_MXC_UART_BASE Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0613c36a |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_EXTRA_ENV_SETTINGS to CFG Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
54f80dd2 |
|
02-Dec-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_HOSTNAME et al to Kconfig This converts the following to Kconfig: CONFIG_GATEWAYIP CONFIG_HOSTNAME CONFIG_IPADDR CONFIG_NETMASK CONFIG_ROOTPATH CONFIG_SERVERIP CONFIG_UBOOTPATH To do this, we introduce a CONFIG_USE_ form of each of the above and change include/env_default.h to test for that to be set before setting a value. Further, we don't want to stringify the IP address related values as they are now properly strings via Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aec118eb |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
imx6/imx7: Remove now empty imx6_spl.h and imx7_spl.h There are now no flags being set in these files, so remove them. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
This contributor prefers not to receive mails <noreply@example.com> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
dd11fdc3 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_USB_FLAGS et al to CFG Perform simple renames of: CONFIG_MXC_USB_FLAGS to CFG_MXC_USB_FLAGS CONFIG_MXC_USB_PORT to CFG_MXC_USB_PORT CONFIG_MXC_USB_PORTSC to CFG_MXC_USB_PORTSC Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
4db38665 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_UART_BASE to CFG Perform a simple rename of CONFIG_MXC_UART_BASE to CFG_MXC_UART_BASE Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0613c36a |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_EXTRA_ENV_SETTINGS to CFG Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
54f80dd2 |
|
02-Dec-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_HOSTNAME et al to Kconfig This converts the following to Kconfig: CONFIG_GATEWAYIP CONFIG_HOSTNAME CONFIG_IPADDR CONFIG_NETMASK CONFIG_ROOTPATH CONFIG_SERVERIP CONFIG_UBOOTPATH To do this, we introduce a CONFIG_USE_ form of each of the above and change include/env_default.h to test for that to be set before setting a value. Further, we don't want to stringify the IP address related values as they are now properly strings via Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aec118eb |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
imx6/imx7: Remove now empty imx6_spl.h and imx7_spl.h There are now no flags being set in these files, so remove them. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
This contributor prefers not to receive mails <noreply@example.com> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
dd11fdc3 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_USB_FLAGS et al to CFG Perform simple renames of: CONFIG_MXC_USB_FLAGS to CFG_MXC_USB_FLAGS CONFIG_MXC_USB_PORT to CFG_MXC_USB_PORT CONFIG_MXC_USB_PORTSC to CFG_MXC_USB_PORTSC Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
4db38665 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_UART_BASE to CFG Perform a simple rename of CONFIG_MXC_UART_BASE to CFG_MXC_UART_BASE Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0613c36a |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_EXTRA_ENV_SETTINGS to CFG Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
54f80dd2 |
|
02-Dec-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_HOSTNAME et al to Kconfig This converts the following to Kconfig: CONFIG_GATEWAYIP CONFIG_HOSTNAME CONFIG_IPADDR CONFIG_NETMASK CONFIG_ROOTPATH CONFIG_SERVERIP CONFIG_UBOOTPATH To do this, we introduce a CONFIG_USE_ form of each of the above and change include/env_default.h to test for that to be set before setting a value. Further, we don't want to stringify the IP address related values as they are now properly strings via Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aec118eb |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
imx6/imx7: Remove now empty imx6_spl.h and imx7_spl.h There are now no flags being set in these files, so remove them. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
This contributor prefers not to receive mails <noreply@example.com> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
dd11fdc3 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_USB_FLAGS et al to CFG Perform simple renames of: CONFIG_MXC_USB_FLAGS to CFG_MXC_USB_FLAGS CONFIG_MXC_USB_PORT to CFG_MXC_USB_PORT CONFIG_MXC_USB_PORTSC to CFG_MXC_USB_PORTSC Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
4db38665 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_UART_BASE to CFG Perform a simple rename of CONFIG_MXC_UART_BASE to CFG_MXC_UART_BASE Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0613c36a |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_EXTRA_ENV_SETTINGS to CFG Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
54f80dd2 |
|
02-Dec-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_HOSTNAME et al to Kconfig This converts the following to Kconfig: CONFIG_GATEWAYIP CONFIG_HOSTNAME CONFIG_IPADDR CONFIG_NETMASK CONFIG_ROOTPATH CONFIG_SERVERIP CONFIG_UBOOTPATH To do this, we introduce a CONFIG_USE_ form of each of the above and change include/env_default.h to test for that to be set before setting a value. Further, we don't want to stringify the IP address related values as they are now properly strings via Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aec118eb |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
imx6/imx7: Remove now empty imx6_spl.h and imx7_spl.h There are now no flags being set in these files, so remove them. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
This contributor prefers not to receive mails <noreply@example.com> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
dd11fdc3 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_USB_FLAGS et al to CFG Perform simple renames of: CONFIG_MXC_USB_FLAGS to CFG_MXC_USB_FLAGS CONFIG_MXC_USB_PORT to CFG_MXC_USB_PORT CONFIG_MXC_USB_PORTSC to CFG_MXC_USB_PORTSC Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
4db38665 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_UART_BASE to CFG Perform a simple rename of CONFIG_MXC_UART_BASE to CFG_MXC_UART_BASE Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0613c36a |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_EXTRA_ENV_SETTINGS to CFG Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
54f80dd2 |
|
02-Dec-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_HOSTNAME et al to Kconfig This converts the following to Kconfig: CONFIG_GATEWAYIP CONFIG_HOSTNAME CONFIG_IPADDR CONFIG_NETMASK CONFIG_ROOTPATH CONFIG_SERVERIP CONFIG_UBOOTPATH To do this, we introduce a CONFIG_USE_ form of each of the above and change include/env_default.h to test for that to be set before setting a value. Further, we don't want to stringify the IP address related values as they are now properly strings via Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aec118eb |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
imx6/imx7: Remove now empty imx6_spl.h and imx7_spl.h There are now no flags being set in these files, so remove them. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
This contributor prefers not to receive mails <noreply@example.com> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
dd11fdc3 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_USB_FLAGS et al to CFG Perform simple renames of: CONFIG_MXC_USB_FLAGS to CFG_MXC_USB_FLAGS CONFIG_MXC_USB_PORT to CFG_MXC_USB_PORT CONFIG_MXC_USB_PORTSC to CFG_MXC_USB_PORTSC Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
4db38665 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_UART_BASE to CFG Perform a simple rename of CONFIG_MXC_UART_BASE to CFG_MXC_UART_BASE Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0613c36a |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_EXTRA_ENV_SETTINGS to CFG Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
54f80dd2 |
|
02-Dec-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_HOSTNAME et al to Kconfig This converts the following to Kconfig: CONFIG_GATEWAYIP CONFIG_HOSTNAME CONFIG_IPADDR CONFIG_NETMASK CONFIG_ROOTPATH CONFIG_SERVERIP CONFIG_UBOOTPATH To do this, we introduce a CONFIG_USE_ form of each of the above and change include/env_default.h to test for that to be set before setting a value. Further, we don't want to stringify the IP address related values as they are now properly strings via Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aec118eb |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
imx6/imx7: Remove now empty imx6_spl.h and imx7_spl.h There are now no flags being set in these files, so remove them. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
This contributor prefers not to receive mails <noreply@example.com> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
dd11fdc3 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_USB_FLAGS et al to CFG Perform simple renames of: CONFIG_MXC_USB_FLAGS to CFG_MXC_USB_FLAGS CONFIG_MXC_USB_PORT to CFG_MXC_USB_PORT CONFIG_MXC_USB_PORTSC to CFG_MXC_USB_PORTSC Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
4db38665 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_UART_BASE to CFG Perform a simple rename of CONFIG_MXC_UART_BASE to CFG_MXC_UART_BASE Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0613c36a |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_EXTRA_ENV_SETTINGS to CFG Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
54f80dd2 |
|
02-Dec-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_HOSTNAME et al to Kconfig This converts the following to Kconfig: CONFIG_GATEWAYIP CONFIG_HOSTNAME CONFIG_IPADDR CONFIG_NETMASK CONFIG_ROOTPATH CONFIG_SERVERIP CONFIG_UBOOTPATH To do this, we introduce a CONFIG_USE_ form of each of the above and change include/env_default.h to test for that to be set before setting a value. Further, we don't want to stringify the IP address related values as they are now properly strings via Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aec118eb |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
imx6/imx7: Remove now empty imx6_spl.h and imx7_spl.h There are now no flags being set in these files, so remove them. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
This contributor prefers not to receive mails <noreply@example.com> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
dd11fdc3 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_USB_FLAGS et al to CFG Perform simple renames of: CONFIG_MXC_USB_FLAGS to CFG_MXC_USB_FLAGS CONFIG_MXC_USB_PORT to CFG_MXC_USB_PORT CONFIG_MXC_USB_PORTSC to CFG_MXC_USB_PORTSC Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
4db38665 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_UART_BASE to CFG Perform a simple rename of CONFIG_MXC_UART_BASE to CFG_MXC_UART_BASE Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0613c36a |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_EXTRA_ENV_SETTINGS to CFG Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
54f80dd2 |
|
02-Dec-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_HOSTNAME et al to Kconfig This converts the following to Kconfig: CONFIG_GATEWAYIP CONFIG_HOSTNAME CONFIG_IPADDR CONFIG_NETMASK CONFIG_ROOTPATH CONFIG_SERVERIP CONFIG_UBOOTPATH To do this, we introduce a CONFIG_USE_ form of each of the above and change include/env_default.h to test for that to be set before setting a value. Further, we don't want to stringify the IP address related values as they are now properly strings via Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aec118eb |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
imx6/imx7: Remove now empty imx6_spl.h and imx7_spl.h There are now no flags being set in these files, so remove them. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
This contributor prefers not to receive mails <noreply@example.com> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
dd11fdc3 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_USB_FLAGS et al to CFG Perform simple renames of: CONFIG_MXC_USB_FLAGS to CFG_MXC_USB_FLAGS CONFIG_MXC_USB_PORT to CFG_MXC_USB_PORT CONFIG_MXC_USB_PORTSC to CFG_MXC_USB_PORTSC Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
4db38665 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_UART_BASE to CFG Perform a simple rename of CONFIG_MXC_UART_BASE to CFG_MXC_UART_BASE Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0613c36a |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_EXTRA_ENV_SETTINGS to CFG Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
54f80dd2 |
|
02-Dec-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_HOSTNAME et al to Kconfig This converts the following to Kconfig: CONFIG_GATEWAYIP CONFIG_HOSTNAME CONFIG_IPADDR CONFIG_NETMASK CONFIG_ROOTPATH CONFIG_SERVERIP CONFIG_UBOOTPATH To do this, we introduce a CONFIG_USE_ form of each of the above and change include/env_default.h to test for that to be set before setting a value. Further, we don't want to stringify the IP address related values as they are now properly strings via Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aec118eb |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
imx6/imx7: Remove now empty imx6_spl.h and imx7_spl.h There are now no flags being set in these files, so remove them. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
This contributor prefers not to receive mails <noreply@example.com> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
dd11fdc3 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_USB_FLAGS et al to CFG Perform simple renames of: CONFIG_MXC_USB_FLAGS to CFG_MXC_USB_FLAGS CONFIG_MXC_USB_PORT to CFG_MXC_USB_PORT CONFIG_MXC_USB_PORTSC to CFG_MXC_USB_PORTSC Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
4db38665 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_UART_BASE to CFG Perform a simple rename of CONFIG_MXC_UART_BASE to CFG_MXC_UART_BASE Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0613c36a |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_EXTRA_ENV_SETTINGS to CFG Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
54f80dd2 |
|
02-Dec-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_HOSTNAME et al to Kconfig This converts the following to Kconfig: CONFIG_GATEWAYIP CONFIG_HOSTNAME CONFIG_IPADDR CONFIG_NETMASK CONFIG_ROOTPATH CONFIG_SERVERIP CONFIG_UBOOTPATH To do this, we introduce a CONFIG_USE_ form of each of the above and change include/env_default.h to test for that to be set before setting a value. Further, we don't want to stringify the IP address related values as they are now properly strings via Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aec118eb |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
imx6/imx7: Remove now empty imx6_spl.h and imx7_spl.h There are now no flags being set in these files, so remove them. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
This contributor prefers not to receive mails <noreply@example.com> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
dd11fdc3 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_USB_FLAGS et al to CFG Perform simple renames of: CONFIG_MXC_USB_FLAGS to CFG_MXC_USB_FLAGS CONFIG_MXC_USB_PORT to CFG_MXC_USB_PORT CONFIG_MXC_USB_PORTSC to CFG_MXC_USB_PORTSC Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
4db38665 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_UART_BASE to CFG Perform a simple rename of CONFIG_MXC_UART_BASE to CFG_MXC_UART_BASE Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0613c36a |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_EXTRA_ENV_SETTINGS to CFG Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
54f80dd2 |
|
02-Dec-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_HOSTNAME et al to Kconfig This converts the following to Kconfig: CONFIG_GATEWAYIP CONFIG_HOSTNAME CONFIG_IPADDR CONFIG_NETMASK CONFIG_ROOTPATH CONFIG_SERVERIP CONFIG_UBOOTPATH To do this, we introduce a CONFIG_USE_ form of each of the above and change include/env_default.h to test for that to be set before setting a value. Further, we don't want to stringify the IP address related values as they are now properly strings via Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aec118eb |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
imx6/imx7: Remove now empty imx6_spl.h and imx7_spl.h There are now no flags being set in these files, so remove them. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
This contributor prefers not to receive mails <noreply@example.com> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
dd11fdc3 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_USB_FLAGS et al to CFG Perform simple renames of: CONFIG_MXC_USB_FLAGS to CFG_MXC_USB_FLAGS CONFIG_MXC_USB_PORT to CFG_MXC_USB_PORT CONFIG_MXC_USB_PORTSC to CFG_MXC_USB_PORTSC Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
4db38665 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_UART_BASE to CFG Perform a simple rename of CONFIG_MXC_UART_BASE to CFG_MXC_UART_BASE Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0613c36a |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_EXTRA_ENV_SETTINGS to CFG Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
54f80dd2 |
|
02-Dec-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_HOSTNAME et al to Kconfig This converts the following to Kconfig: CONFIG_GATEWAYIP CONFIG_HOSTNAME CONFIG_IPADDR CONFIG_NETMASK CONFIG_ROOTPATH CONFIG_SERVERIP CONFIG_UBOOTPATH To do this, we introduce a CONFIG_USE_ form of each of the above and change include/env_default.h to test for that to be set before setting a value. Further, we don't want to stringify the IP address related values as they are now properly strings via Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aec118eb |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
imx6/imx7: Remove now empty imx6_spl.h and imx7_spl.h There are now no flags being set in these files, so remove them. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
This contributor prefers not to receive mails <noreply@example.com> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
dd11fdc3 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_USB_FLAGS et al to CFG Perform simple renames of: CONFIG_MXC_USB_FLAGS to CFG_MXC_USB_FLAGS CONFIG_MXC_USB_PORT to CFG_MXC_USB_PORT CONFIG_MXC_USB_PORTSC to CFG_MXC_USB_PORTSC Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
4db38665 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_UART_BASE to CFG Perform a simple rename of CONFIG_MXC_UART_BASE to CFG_MXC_UART_BASE Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0613c36a |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_EXTRA_ENV_SETTINGS to CFG Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
54f80dd2 |
|
02-Dec-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_HOSTNAME et al to Kconfig This converts the following to Kconfig: CONFIG_GATEWAYIP CONFIG_HOSTNAME CONFIG_IPADDR CONFIG_NETMASK CONFIG_ROOTPATH CONFIG_SERVERIP CONFIG_UBOOTPATH To do this, we introduce a CONFIG_USE_ form of each of the above and change include/env_default.h to test for that to be set before setting a value. Further, we don't want to stringify the IP address related values as they are now properly strings via Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aec118eb |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
imx6/imx7: Remove now empty imx6_spl.h and imx7_spl.h There are now no flags being set in these files, so remove them. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
This contributor prefers not to receive mails <noreply@example.com> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
dd11fdc3 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_USB_FLAGS et al to CFG Perform simple renames of: CONFIG_MXC_USB_FLAGS to CFG_MXC_USB_FLAGS CONFIG_MXC_USB_PORT to CFG_MXC_USB_PORT CONFIG_MXC_USB_PORTSC to CFG_MXC_USB_PORTSC Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
4db38665 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_UART_BASE to CFG Perform a simple rename of CONFIG_MXC_UART_BASE to CFG_MXC_UART_BASE Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0613c36a |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_EXTRA_ENV_SETTINGS to CFG Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
54f80dd2 |
|
02-Dec-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_HOSTNAME et al to Kconfig This converts the following to Kconfig: CONFIG_GATEWAYIP CONFIG_HOSTNAME CONFIG_IPADDR CONFIG_NETMASK CONFIG_ROOTPATH CONFIG_SERVERIP CONFIG_UBOOTPATH To do this, we introduce a CONFIG_USE_ form of each of the above and change include/env_default.h to test for that to be set before setting a value. Further, we don't want to stringify the IP address related values as they are now properly strings via Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aec118eb |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
imx6/imx7: Remove now empty imx6_spl.h and imx7_spl.h There are now no flags being set in these files, so remove them. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
This contributor prefers not to receive mails <noreply@example.com> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
dd11fdc3 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_USB_FLAGS et al to CFG Perform simple renames of: CONFIG_MXC_USB_FLAGS to CFG_MXC_USB_FLAGS CONFIG_MXC_USB_PORT to CFG_MXC_USB_PORT CONFIG_MXC_USB_PORTSC to CFG_MXC_USB_PORTSC Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
4db38665 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_UART_BASE to CFG Perform a simple rename of CONFIG_MXC_UART_BASE to CFG_MXC_UART_BASE Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0613c36a |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_EXTRA_ENV_SETTINGS to CFG Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
54f80dd2 |
|
02-Dec-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_HOSTNAME et al to Kconfig This converts the following to Kconfig: CONFIG_GATEWAYIP CONFIG_HOSTNAME CONFIG_IPADDR CONFIG_NETMASK CONFIG_ROOTPATH CONFIG_SERVERIP CONFIG_UBOOTPATH To do this, we introduce a CONFIG_USE_ form of each of the above and change include/env_default.h to test for that to be set before setting a value. Further, we don't want to stringify the IP address related values as they are now properly strings via Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aec118eb |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
imx6/imx7: Remove now empty imx6_spl.h and imx7_spl.h There are now no flags being set in these files, so remove them. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
This contributor prefers not to receive mails <noreply@example.com> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
dd11fdc3 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_USB_FLAGS et al to CFG Perform simple renames of: CONFIG_MXC_USB_FLAGS to CFG_MXC_USB_FLAGS CONFIG_MXC_USB_PORT to CFG_MXC_USB_PORT CONFIG_MXC_USB_PORTSC to CFG_MXC_USB_PORTSC Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
4db38665 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_UART_BASE to CFG Perform a simple rename of CONFIG_MXC_UART_BASE to CFG_MXC_UART_BASE Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0613c36a |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_EXTRA_ENV_SETTINGS to CFG Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
54f80dd2 |
|
02-Dec-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_HOSTNAME et al to Kconfig This converts the following to Kconfig: CONFIG_GATEWAYIP CONFIG_HOSTNAME CONFIG_IPADDR CONFIG_NETMASK CONFIG_ROOTPATH CONFIG_SERVERIP CONFIG_UBOOTPATH To do this, we introduce a CONFIG_USE_ form of each of the above and change include/env_default.h to test for that to be set before setting a value. Further, we don't want to stringify the IP address related values as they are now properly strings via Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aec118eb |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
imx6/imx7: Remove now empty imx6_spl.h and imx7_spl.h There are now no flags being set in these files, so remove them. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
This contributor prefers not to receive mails <noreply@example.com> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
dd11fdc3 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_USB_FLAGS et al to CFG Perform simple renames of: CONFIG_MXC_USB_FLAGS to CFG_MXC_USB_FLAGS CONFIG_MXC_USB_PORT to CFG_MXC_USB_PORT CONFIG_MXC_USB_PORTSC to CFG_MXC_USB_PORTSC Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
4db38665 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_UART_BASE to CFG Perform a simple rename of CONFIG_MXC_UART_BASE to CFG_MXC_UART_BASE Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0613c36a |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_EXTRA_ENV_SETTINGS to CFG Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
54f80dd2 |
|
02-Dec-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_HOSTNAME et al to Kconfig This converts the following to Kconfig: CONFIG_GATEWAYIP CONFIG_HOSTNAME CONFIG_IPADDR CONFIG_NETMASK CONFIG_ROOTPATH CONFIG_SERVERIP CONFIG_UBOOTPATH To do this, we introduce a CONFIG_USE_ form of each of the above and change include/env_default.h to test for that to be set before setting a value. Further, we don't want to stringify the IP address related values as they are now properly strings via Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aec118eb |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
imx6/imx7: Remove now empty imx6_spl.h and imx7_spl.h There are now no flags being set in these files, so remove them. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
This contributor prefers not to receive mails <noreply@example.com> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
dd11fdc3 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_USB_FLAGS et al to CFG Perform simple renames of: CONFIG_MXC_USB_FLAGS to CFG_MXC_USB_FLAGS CONFIG_MXC_USB_PORT to CFG_MXC_USB_PORT CONFIG_MXC_USB_PORTSC to CFG_MXC_USB_PORTSC Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
4db38665 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_UART_BASE to CFG Perform a simple rename of CONFIG_MXC_UART_BASE to CFG_MXC_UART_BASE Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0613c36a |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_EXTRA_ENV_SETTINGS to CFG Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
54f80dd2 |
|
02-Dec-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_HOSTNAME et al to Kconfig This converts the following to Kconfig: CONFIG_GATEWAYIP CONFIG_HOSTNAME CONFIG_IPADDR CONFIG_NETMASK CONFIG_ROOTPATH CONFIG_SERVERIP CONFIG_UBOOTPATH To do this, we introduce a CONFIG_USE_ form of each of the above and change include/env_default.h to test for that to be set before setting a value. Further, we don't want to stringify the IP address related values as they are now properly strings via Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aec118eb |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
imx6/imx7: Remove now empty imx6_spl.h and imx7_spl.h There are now no flags being set in these files, so remove them. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
This contributor prefers not to receive mails <noreply@example.com> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
dd11fdc3 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_USB_FLAGS et al to CFG Perform simple renames of: CONFIG_MXC_USB_FLAGS to CFG_MXC_USB_FLAGS CONFIG_MXC_USB_PORT to CFG_MXC_USB_PORT CONFIG_MXC_USB_PORTSC to CFG_MXC_USB_PORTSC Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
4db38665 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_UART_BASE to CFG Perform a simple rename of CONFIG_MXC_UART_BASE to CFG_MXC_UART_BASE Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0613c36a |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_EXTRA_ENV_SETTINGS to CFG Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
54f80dd2 |
|
02-Dec-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_HOSTNAME et al to Kconfig This converts the following to Kconfig: CONFIG_GATEWAYIP CONFIG_HOSTNAME CONFIG_IPADDR CONFIG_NETMASK CONFIG_ROOTPATH CONFIG_SERVERIP CONFIG_UBOOTPATH To do this, we introduce a CONFIG_USE_ form of each of the above and change include/env_default.h to test for that to be set before setting a value. Further, we don't want to stringify the IP address related values as they are now properly strings via Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aec118eb |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
imx6/imx7: Remove now empty imx6_spl.h and imx7_spl.h There are now no flags being set in these files, so remove them. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
This contributor prefers not to receive mails <noreply@example.com> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
dd11fdc3 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_USB_FLAGS et al to CFG Perform simple renames of: CONFIG_MXC_USB_FLAGS to CFG_MXC_USB_FLAGS CONFIG_MXC_USB_PORT to CFG_MXC_USB_PORT CONFIG_MXC_USB_PORTSC to CFG_MXC_USB_PORTSC Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
4db38665 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_UART_BASE to CFG Perform a simple rename of CONFIG_MXC_UART_BASE to CFG_MXC_UART_BASE Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0613c36a |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_EXTRA_ENV_SETTINGS to CFG Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
54f80dd2 |
|
02-Dec-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_HOSTNAME et al to Kconfig This converts the following to Kconfig: CONFIG_GATEWAYIP CONFIG_HOSTNAME CONFIG_IPADDR CONFIG_NETMASK CONFIG_ROOTPATH CONFIG_SERVERIP CONFIG_UBOOTPATH To do this, we introduce a CONFIG_USE_ form of each of the above and change include/env_default.h to test for that to be set before setting a value. Further, we don't want to stringify the IP address related values as they are now properly strings via Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aec118eb |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
imx6/imx7: Remove now empty imx6_spl.h and imx7_spl.h There are now no flags being set in these files, so remove them. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
This contributor prefers not to receive mails <noreply@example.com> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
dd11fdc3 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_USB_FLAGS et al to CFG Perform simple renames of: CONFIG_MXC_USB_FLAGS to CFG_MXC_USB_FLAGS CONFIG_MXC_USB_PORT to CFG_MXC_USB_PORT CONFIG_MXC_USB_PORTSC to CFG_MXC_USB_PORTSC Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
4db38665 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_UART_BASE to CFG Perform a simple rename of CONFIG_MXC_UART_BASE to CFG_MXC_UART_BASE Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0613c36a |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_EXTRA_ENV_SETTINGS to CFG Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
54f80dd2 |
|
02-Dec-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_HOSTNAME et al to Kconfig This converts the following to Kconfig: CONFIG_GATEWAYIP CONFIG_HOSTNAME CONFIG_IPADDR CONFIG_NETMASK CONFIG_ROOTPATH CONFIG_SERVERIP CONFIG_UBOOTPATH To do this, we introduce a CONFIG_USE_ form of each of the above and change include/env_default.h to test for that to be set before setting a value. Further, we don't want to stringify the IP address related values as they are now properly strings via Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aec118eb |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
imx6/imx7: Remove now empty imx6_spl.h and imx7_spl.h There are now no flags being set in these files, so remove them. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
This contributor prefers not to receive mails <noreply@example.com> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
dd11fdc3 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_USB_FLAGS et al to CFG Perform simple renames of: CONFIG_MXC_USB_FLAGS to CFG_MXC_USB_FLAGS CONFIG_MXC_USB_PORT to CFG_MXC_USB_PORT CONFIG_MXC_USB_PORTSC to CFG_MXC_USB_PORTSC Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
4db38665 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_UART_BASE to CFG Perform a simple rename of CONFIG_MXC_UART_BASE to CFG_MXC_UART_BASE Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0613c36a |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_EXTRA_ENV_SETTINGS to CFG Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
54f80dd2 |
|
02-Dec-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_HOSTNAME et al to Kconfig This converts the following to Kconfig: CONFIG_GATEWAYIP CONFIG_HOSTNAME CONFIG_IPADDR CONFIG_NETMASK CONFIG_ROOTPATH CONFIG_SERVERIP CONFIG_UBOOTPATH To do this, we introduce a CONFIG_USE_ form of each of the above and change include/env_default.h to test for that to be set before setting a value. Further, we don't want to stringify the IP address related values as they are now properly strings via Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aec118eb |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
imx6/imx7: Remove now empty imx6_spl.h and imx7_spl.h There are now no flags being set in these files, so remove them. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
This contributor prefers not to receive mails <noreply@example.com> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
dd11fdc3 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_USB_FLAGS et al to CFG Perform simple renames of: CONFIG_MXC_USB_FLAGS to CFG_MXC_USB_FLAGS CONFIG_MXC_USB_PORT to CFG_MXC_USB_PORT CONFIG_MXC_USB_PORTSC to CFG_MXC_USB_PORTSC Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
4db38665 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_UART_BASE to CFG Perform a simple rename of CONFIG_MXC_UART_BASE to CFG_MXC_UART_BASE Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0613c36a |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_EXTRA_ENV_SETTINGS to CFG Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
54f80dd2 |
|
02-Dec-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_HOSTNAME et al to Kconfig This converts the following to Kconfig: CONFIG_GATEWAYIP CONFIG_HOSTNAME CONFIG_IPADDR CONFIG_NETMASK CONFIG_ROOTPATH CONFIG_SERVERIP CONFIG_UBOOTPATH To do this, we introduce a CONFIG_USE_ form of each of the above and change include/env_default.h to test for that to be set before setting a value. Further, we don't want to stringify the IP address related values as they are now properly strings via Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aec118eb |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
imx6/imx7: Remove now empty imx6_spl.h and imx7_spl.h There are now no flags being set in these files, so remove them. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
This contributor prefers not to receive mails <noreply@example.com> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
dd11fdc3 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_USB_FLAGS et al to CFG Perform simple renames of: CONFIG_MXC_USB_FLAGS to CFG_MXC_USB_FLAGS CONFIG_MXC_USB_PORT to CFG_MXC_USB_PORT CONFIG_MXC_USB_PORTSC to CFG_MXC_USB_PORTSC Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
4db38665 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_UART_BASE to CFG Perform a simple rename of CONFIG_MXC_UART_BASE to CFG_MXC_UART_BASE Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0613c36a |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_EXTRA_ENV_SETTINGS to CFG Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
54f80dd2 |
|
02-Dec-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_HOSTNAME et al to Kconfig This converts the following to Kconfig: CONFIG_GATEWAYIP CONFIG_HOSTNAME CONFIG_IPADDR CONFIG_NETMASK CONFIG_ROOTPATH CONFIG_SERVERIP CONFIG_UBOOTPATH To do this, we introduce a CONFIG_USE_ form of each of the above and change include/env_default.h to test for that to be set before setting a value. Further, we don't want to stringify the IP address related values as they are now properly strings via Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aec118eb |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
imx6/imx7: Remove now empty imx6_spl.h and imx7_spl.h There are now no flags being set in these files, so remove them. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
This contributor prefers not to receive mails <noreply@example.com> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
dd11fdc3 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_USB_FLAGS et al to CFG Perform simple renames of: CONFIG_MXC_USB_FLAGS to CFG_MXC_USB_FLAGS CONFIG_MXC_USB_PORT to CFG_MXC_USB_PORT CONFIG_MXC_USB_PORTSC to CFG_MXC_USB_PORTSC Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
4db38665 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_UART_BASE to CFG Perform a simple rename of CONFIG_MXC_UART_BASE to CFG_MXC_UART_BASE Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0613c36a |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_EXTRA_ENV_SETTINGS to CFG Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
54f80dd2 |
|
02-Dec-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_HOSTNAME et al to Kconfig This converts the following to Kconfig: CONFIG_GATEWAYIP CONFIG_HOSTNAME CONFIG_IPADDR CONFIG_NETMASK CONFIG_ROOTPATH CONFIG_SERVERIP CONFIG_UBOOTPATH To do this, we introduce a CONFIG_USE_ form of each of the above and change include/env_default.h to test for that to be set before setting a value. Further, we don't want to stringify the IP address related values as they are now properly strings via Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aec118eb |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
imx6/imx7: Remove now empty imx6_spl.h and imx7_spl.h There are now no flags being set in these files, so remove them. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
This contributor prefers not to receive mails <noreply@example.com> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
dd11fdc3 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_USB_FLAGS et al to CFG Perform simple renames of: CONFIG_MXC_USB_FLAGS to CFG_MXC_USB_FLAGS CONFIG_MXC_USB_PORT to CFG_MXC_USB_PORT CONFIG_MXC_USB_PORTSC to CFG_MXC_USB_PORTSC Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
4db38665 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_UART_BASE to CFG Perform a simple rename of CONFIG_MXC_UART_BASE to CFG_MXC_UART_BASE Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0613c36a |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_EXTRA_ENV_SETTINGS to CFG Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
54f80dd2 |
|
02-Dec-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_HOSTNAME et al to Kconfig This converts the following to Kconfig: CONFIG_GATEWAYIP CONFIG_HOSTNAME CONFIG_IPADDR CONFIG_NETMASK CONFIG_ROOTPATH CONFIG_SERVERIP CONFIG_UBOOTPATH To do this, we introduce a CONFIG_USE_ form of each of the above and change include/env_default.h to test for that to be set before setting a value. Further, we don't want to stringify the IP address related values as they are now properly strings via Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aec118eb |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
imx6/imx7: Remove now empty imx6_spl.h and imx7_spl.h There are now no flags being set in these files, so remove them. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
This contributor prefers not to receive mails <noreply@example.com> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
dd11fdc3 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_USB_FLAGS et al to CFG Perform simple renames of: CONFIG_MXC_USB_FLAGS to CFG_MXC_USB_FLAGS CONFIG_MXC_USB_PORT to CFG_MXC_USB_PORT CONFIG_MXC_USB_PORTSC to CFG_MXC_USB_PORTSC Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
4db38665 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_UART_BASE to CFG Perform a simple rename of CONFIG_MXC_UART_BASE to CFG_MXC_UART_BASE Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0613c36a |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_EXTRA_ENV_SETTINGS to CFG Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
54f80dd2 |
|
02-Dec-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_HOSTNAME et al to Kconfig This converts the following to Kconfig: CONFIG_GATEWAYIP CONFIG_HOSTNAME CONFIG_IPADDR CONFIG_NETMASK CONFIG_ROOTPATH CONFIG_SERVERIP CONFIG_UBOOTPATH To do this, we introduce a CONFIG_USE_ form of each of the above and change include/env_default.h to test for that to be set before setting a value. Further, we don't want to stringify the IP address related values as they are now properly strings via Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aec118eb |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
imx6/imx7: Remove now empty imx6_spl.h and imx7_spl.h There are now no flags being set in these files, so remove them. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
This contributor prefers not to receive mails <noreply@example.com> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
dd11fdc3 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_USB_FLAGS et al to CFG Perform simple renames of: CONFIG_MXC_USB_FLAGS to CFG_MXC_USB_FLAGS CONFIG_MXC_USB_PORT to CFG_MXC_USB_PORT CONFIG_MXC_USB_PORTSC to CFG_MXC_USB_PORTSC Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
4db38665 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_UART_BASE to CFG Perform a simple rename of CONFIG_MXC_UART_BASE to CFG_MXC_UART_BASE Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0613c36a |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_EXTRA_ENV_SETTINGS to CFG Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
54f80dd2 |
|
02-Dec-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_HOSTNAME et al to Kconfig This converts the following to Kconfig: CONFIG_GATEWAYIP CONFIG_HOSTNAME CONFIG_IPADDR CONFIG_NETMASK CONFIG_ROOTPATH CONFIG_SERVERIP CONFIG_UBOOTPATH To do this, we introduce a CONFIG_USE_ form of each of the above and change include/env_default.h to test for that to be set before setting a value. Further, we don't want to stringify the IP address related values as they are now properly strings via Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aec118eb |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
imx6/imx7: Remove now empty imx6_spl.h and imx7_spl.h There are now no flags being set in these files, so remove them. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
This contributor prefers not to receive mails <noreply@example.com> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
dd11fdc3 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_USB_FLAGS et al to CFG Perform simple renames of: CONFIG_MXC_USB_FLAGS to CFG_MXC_USB_FLAGS CONFIG_MXC_USB_PORT to CFG_MXC_USB_PORT CONFIG_MXC_USB_PORTSC to CFG_MXC_USB_PORTSC Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
4db38665 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_UART_BASE to CFG Perform a simple rename of CONFIG_MXC_UART_BASE to CFG_MXC_UART_BASE Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0613c36a |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_EXTRA_ENV_SETTINGS to CFG Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
54f80dd2 |
|
02-Dec-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_HOSTNAME et al to Kconfig This converts the following to Kconfig: CONFIG_GATEWAYIP CONFIG_HOSTNAME CONFIG_IPADDR CONFIG_NETMASK CONFIG_ROOTPATH CONFIG_SERVERIP CONFIG_UBOOTPATH To do this, we introduce a CONFIG_USE_ form of each of the above and change include/env_default.h to test for that to be set before setting a value. Further, we don't want to stringify the IP address related values as they are now properly strings via Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aec118eb |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
imx6/imx7: Remove now empty imx6_spl.h and imx7_spl.h There are now no flags being set in these files, so remove them. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
This contributor prefers not to receive mails <noreply@example.com> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
dd11fdc3 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_USB_FLAGS et al to CFG Perform simple renames of: CONFIG_MXC_USB_FLAGS to CFG_MXC_USB_FLAGS CONFIG_MXC_USB_PORT to CFG_MXC_USB_PORT CONFIG_MXC_USB_PORTSC to CFG_MXC_USB_PORTSC Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
4db38665 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_UART_BASE to CFG Perform a simple rename of CONFIG_MXC_UART_BASE to CFG_MXC_UART_BASE Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0613c36a |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_EXTRA_ENV_SETTINGS to CFG Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
54f80dd2 |
|
02-Dec-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_HOSTNAME et al to Kconfig This converts the following to Kconfig: CONFIG_GATEWAYIP CONFIG_HOSTNAME CONFIG_IPADDR CONFIG_NETMASK CONFIG_ROOTPATH CONFIG_SERVERIP CONFIG_UBOOTPATH To do this, we introduce a CONFIG_USE_ form of each of the above and change include/env_default.h to test for that to be set before setting a value. Further, we don't want to stringify the IP address related values as they are now properly strings via Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aec118eb |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
imx6/imx7: Remove now empty imx6_spl.h and imx7_spl.h There are now no flags being set in these files, so remove them. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
This contributor prefers not to receive mails <noreply@example.com> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
dd11fdc3 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_USB_FLAGS et al to CFG Perform simple renames of: CONFIG_MXC_USB_FLAGS to CFG_MXC_USB_FLAGS CONFIG_MXC_USB_PORT to CFG_MXC_USB_PORT CONFIG_MXC_USB_PORTSC to CFG_MXC_USB_PORTSC Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
4db38665 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_UART_BASE to CFG Perform a simple rename of CONFIG_MXC_UART_BASE to CFG_MXC_UART_BASE Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0613c36a |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_EXTRA_ENV_SETTINGS to CFG Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
54f80dd2 |
|
02-Dec-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_HOSTNAME et al to Kconfig This converts the following to Kconfig: CONFIG_GATEWAYIP CONFIG_HOSTNAME CONFIG_IPADDR CONFIG_NETMASK CONFIG_ROOTPATH CONFIG_SERVERIP CONFIG_UBOOTPATH To do this, we introduce a CONFIG_USE_ form of each of the above and change include/env_default.h to test for that to be set before setting a value. Further, we don't want to stringify the IP address related values as they are now properly strings via Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aec118eb |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
imx6/imx7: Remove now empty imx6_spl.h and imx7_spl.h There are now no flags being set in these files, so remove them. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
This contributor prefers not to receive mails <noreply@example.com> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
dd11fdc3 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_USB_FLAGS et al to CFG Perform simple renames of: CONFIG_MXC_USB_FLAGS to CFG_MXC_USB_FLAGS CONFIG_MXC_USB_PORT to CFG_MXC_USB_PORT CONFIG_MXC_USB_PORTSC to CFG_MXC_USB_PORTSC Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
4db38665 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_UART_BASE to CFG Perform a simple rename of CONFIG_MXC_UART_BASE to CFG_MXC_UART_BASE Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0613c36a |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_EXTRA_ENV_SETTINGS to CFG Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
54f80dd2 |
|
02-Dec-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_HOSTNAME et al to Kconfig This converts the following to Kconfig: CONFIG_GATEWAYIP CONFIG_HOSTNAME CONFIG_IPADDR CONFIG_NETMASK CONFIG_ROOTPATH CONFIG_SERVERIP CONFIG_UBOOTPATH To do this, we introduce a CONFIG_USE_ form of each of the above and change include/env_default.h to test for that to be set before setting a value. Further, we don't want to stringify the IP address related values as they are now properly strings via Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aec118eb |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
imx6/imx7: Remove now empty imx6_spl.h and imx7_spl.h There are now no flags being set in these files, so remove them. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
This contributor prefers not to receive mails <noreply@example.com> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
dd11fdc3 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_USB_FLAGS et al to CFG Perform simple renames of: CONFIG_MXC_USB_FLAGS to CFG_MXC_USB_FLAGS CONFIG_MXC_USB_PORT to CFG_MXC_USB_PORT CONFIG_MXC_USB_PORTSC to CFG_MXC_USB_PORTSC Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
4db38665 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_UART_BASE to CFG Perform a simple rename of CONFIG_MXC_UART_BASE to CFG_MXC_UART_BASE Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0613c36a |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_EXTRA_ENV_SETTINGS to CFG Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
54f80dd2 |
|
02-Dec-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_HOSTNAME et al to Kconfig This converts the following to Kconfig: CONFIG_GATEWAYIP CONFIG_HOSTNAME CONFIG_IPADDR CONFIG_NETMASK CONFIG_ROOTPATH CONFIG_SERVERIP CONFIG_UBOOTPATH To do this, we introduce a CONFIG_USE_ form of each of the above and change include/env_default.h to test for that to be set before setting a value. Further, we don't want to stringify the IP address related values as they are now properly strings via Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aec118eb |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
imx6/imx7: Remove now empty imx6_spl.h and imx7_spl.h There are now no flags being set in these files, so remove them. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
This contributor prefers not to receive mails <noreply@example.com> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
dd11fdc3 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_USB_FLAGS et al to CFG Perform simple renames of: CONFIG_MXC_USB_FLAGS to CFG_MXC_USB_FLAGS CONFIG_MXC_USB_PORT to CFG_MXC_USB_PORT CONFIG_MXC_USB_PORTSC to CFG_MXC_USB_PORTSC Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
4db38665 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_UART_BASE to CFG Perform a simple rename of CONFIG_MXC_UART_BASE to CFG_MXC_UART_BASE Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0613c36a |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_EXTRA_ENV_SETTINGS to CFG Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
54f80dd2 |
|
02-Dec-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_HOSTNAME et al to Kconfig This converts the following to Kconfig: CONFIG_GATEWAYIP CONFIG_HOSTNAME CONFIG_IPADDR CONFIG_NETMASK CONFIG_ROOTPATH CONFIG_SERVERIP CONFIG_UBOOTPATH To do this, we introduce a CONFIG_USE_ form of each of the above and change include/env_default.h to test for that to be set before setting a value. Further, we don't want to stringify the IP address related values as they are now properly strings via Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aec118eb |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
imx6/imx7: Remove now empty imx6_spl.h and imx7_spl.h There are now no flags being set in these files, so remove them. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
This contributor prefers not to receive mails <noreply@example.com> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
dd11fdc3 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_USB_FLAGS et al to CFG Perform simple renames of: CONFIG_MXC_USB_FLAGS to CFG_MXC_USB_FLAGS CONFIG_MXC_USB_PORT to CFG_MXC_USB_PORT CONFIG_MXC_USB_PORTSC to CFG_MXC_USB_PORTSC Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
4db38665 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_UART_BASE to CFG Perform a simple rename of CONFIG_MXC_UART_BASE to CFG_MXC_UART_BASE Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0613c36a |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_EXTRA_ENV_SETTINGS to CFG Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
54f80dd2 |
|
02-Dec-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_HOSTNAME et al to Kconfig This converts the following to Kconfig: CONFIG_GATEWAYIP CONFIG_HOSTNAME CONFIG_IPADDR CONFIG_NETMASK CONFIG_ROOTPATH CONFIG_SERVERIP CONFIG_UBOOTPATH To do this, we introduce a CONFIG_USE_ form of each of the above and change include/env_default.h to test for that to be set before setting a value. Further, we don't want to stringify the IP address related values as they are now properly strings via Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aec118eb |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
imx6/imx7: Remove now empty imx6_spl.h and imx7_spl.h There are now no flags being set in these files, so remove them. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
This contributor prefers not to receive mails <noreply@example.com> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
dd11fdc3 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_USB_FLAGS et al to CFG Perform simple renames of: CONFIG_MXC_USB_FLAGS to CFG_MXC_USB_FLAGS CONFIG_MXC_USB_PORT to CFG_MXC_USB_PORT CONFIG_MXC_USB_PORTSC to CFG_MXC_USB_PORTSC Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
4db38665 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_UART_BASE to CFG Perform a simple rename of CONFIG_MXC_UART_BASE to CFG_MXC_UART_BASE Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0613c36a |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_EXTRA_ENV_SETTINGS to CFG Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
54f80dd2 |
|
02-Dec-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_HOSTNAME et al to Kconfig This converts the following to Kconfig: CONFIG_GATEWAYIP CONFIG_HOSTNAME CONFIG_IPADDR CONFIG_NETMASK CONFIG_ROOTPATH CONFIG_SERVERIP CONFIG_UBOOTPATH To do this, we introduce a CONFIG_USE_ form of each of the above and change include/env_default.h to test for that to be set before setting a value. Further, we don't want to stringify the IP address related values as they are now properly strings via Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aec118eb |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
imx6/imx7: Remove now empty imx6_spl.h and imx7_spl.h There are now no flags being set in these files, so remove them. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
This contributor prefers not to receive mails <noreply@example.com> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
dd11fdc3 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_USB_FLAGS et al to CFG Perform simple renames of: CONFIG_MXC_USB_FLAGS to CFG_MXC_USB_FLAGS CONFIG_MXC_USB_PORT to CFG_MXC_USB_PORT CONFIG_MXC_USB_PORTSC to CFG_MXC_USB_PORTSC Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
4db38665 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_UART_BASE to CFG Perform a simple rename of CONFIG_MXC_UART_BASE to CFG_MXC_UART_BASE Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0613c36a |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_EXTRA_ENV_SETTINGS to CFG Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
54f80dd2 |
|
02-Dec-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_HOSTNAME et al to Kconfig This converts the following to Kconfig: CONFIG_GATEWAYIP CONFIG_HOSTNAME CONFIG_IPADDR CONFIG_NETMASK CONFIG_ROOTPATH CONFIG_SERVERIP CONFIG_UBOOTPATH To do this, we introduce a CONFIG_USE_ form of each of the above and change include/env_default.h to test for that to be set before setting a value. Further, we don't want to stringify the IP address related values as they are now properly strings via Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aec118eb |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
imx6/imx7: Remove now empty imx6_spl.h and imx7_spl.h There are now no flags being set in these files, so remove them. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
This contributor prefers not to receive mails <noreply@example.com> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
dd11fdc3 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_USB_FLAGS et al to CFG Perform simple renames of: CONFIG_MXC_USB_FLAGS to CFG_MXC_USB_FLAGS CONFIG_MXC_USB_PORT to CFG_MXC_USB_PORT CONFIG_MXC_USB_PORTSC to CFG_MXC_USB_PORTSC Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
4db38665 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_UART_BASE to CFG Perform a simple rename of CONFIG_MXC_UART_BASE to CFG_MXC_UART_BASE Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0613c36a |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_EXTRA_ENV_SETTINGS to CFG Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
54f80dd2 |
|
02-Dec-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_HOSTNAME et al to Kconfig This converts the following to Kconfig: CONFIG_GATEWAYIP CONFIG_HOSTNAME CONFIG_IPADDR CONFIG_NETMASK CONFIG_ROOTPATH CONFIG_SERVERIP CONFIG_UBOOTPATH To do this, we introduce a CONFIG_USE_ form of each of the above and change include/env_default.h to test for that to be set before setting a value. Further, we don't want to stringify the IP address related values as they are now properly strings via Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aec118eb |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
imx6/imx7: Remove now empty imx6_spl.h and imx7_spl.h There are now no flags being set in these files, so remove them. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
This contributor prefers not to receive mails <noreply@example.com> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
dd11fdc3 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_USB_FLAGS et al to CFG Perform simple renames of: CONFIG_MXC_USB_FLAGS to CFG_MXC_USB_FLAGS CONFIG_MXC_USB_PORT to CFG_MXC_USB_PORT CONFIG_MXC_USB_PORTSC to CFG_MXC_USB_PORTSC Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
4db38665 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_UART_BASE to CFG Perform a simple rename of CONFIG_MXC_UART_BASE to CFG_MXC_UART_BASE Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0613c36a |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_EXTRA_ENV_SETTINGS to CFG Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
54f80dd2 |
|
02-Dec-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_HOSTNAME et al to Kconfig This converts the following to Kconfig: CONFIG_GATEWAYIP CONFIG_HOSTNAME CONFIG_IPADDR CONFIG_NETMASK CONFIG_ROOTPATH CONFIG_SERVERIP CONFIG_UBOOTPATH To do this, we introduce a CONFIG_USE_ form of each of the above and change include/env_default.h to test for that to be set before setting a value. Further, we don't want to stringify the IP address related values as they are now properly strings via Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aec118eb |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
imx6/imx7: Remove now empty imx6_spl.h and imx7_spl.h There are now no flags being set in these files, so remove them. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
This contributor prefers not to receive mails <noreply@example.com> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
dd11fdc3 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_USB_FLAGS et al to CFG Perform simple renames of: CONFIG_MXC_USB_FLAGS to CFG_MXC_USB_FLAGS CONFIG_MXC_USB_PORT to CFG_MXC_USB_PORT CONFIG_MXC_USB_PORTSC to CFG_MXC_USB_PORTSC Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
4db38665 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_UART_BASE to CFG Perform a simple rename of CONFIG_MXC_UART_BASE to CFG_MXC_UART_BASE Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0613c36a |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_EXTRA_ENV_SETTINGS to CFG Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
54f80dd2 |
|
02-Dec-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_HOSTNAME et al to Kconfig This converts the following to Kconfig: CONFIG_GATEWAYIP CONFIG_HOSTNAME CONFIG_IPADDR CONFIG_NETMASK CONFIG_ROOTPATH CONFIG_SERVERIP CONFIG_UBOOTPATH To do this, we introduce a CONFIG_USE_ form of each of the above and change include/env_default.h to test for that to be set before setting a value. Further, we don't want to stringify the IP address related values as they are now properly strings via Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aec118eb |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
imx6/imx7: Remove now empty imx6_spl.h and imx7_spl.h There are now no flags being set in these files, so remove them. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
This contributor prefers not to receive mails <noreply@example.com> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
dd11fdc3 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_USB_FLAGS et al to CFG Perform simple renames of: CONFIG_MXC_USB_FLAGS to CFG_MXC_USB_FLAGS CONFIG_MXC_USB_PORT to CFG_MXC_USB_PORT CONFIG_MXC_USB_PORTSC to CFG_MXC_USB_PORTSC Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
4db38665 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_UART_BASE to CFG Perform a simple rename of CONFIG_MXC_UART_BASE to CFG_MXC_UART_BASE Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0613c36a |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_EXTRA_ENV_SETTINGS to CFG Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
54f80dd2 |
|
02-Dec-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_HOSTNAME et al to Kconfig This converts the following to Kconfig: CONFIG_GATEWAYIP CONFIG_HOSTNAME CONFIG_IPADDR CONFIG_NETMASK CONFIG_ROOTPATH CONFIG_SERVERIP CONFIG_UBOOTPATH To do this, we introduce a CONFIG_USE_ form of each of the above and change include/env_default.h to test for that to be set before setting a value. Further, we don't want to stringify the IP address related values as they are now properly strings via Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aec118eb |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
imx6/imx7: Remove now empty imx6_spl.h and imx7_spl.h There are now no flags being set in these files, so remove them. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
This contributor prefers not to receive mails <noreply@example.com> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
dd11fdc3 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_USB_FLAGS et al to CFG Perform simple renames of: CONFIG_MXC_USB_FLAGS to CFG_MXC_USB_FLAGS CONFIG_MXC_USB_PORT to CFG_MXC_USB_PORT CONFIG_MXC_USB_PORTSC to CFG_MXC_USB_PORTSC Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
4db38665 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_UART_BASE to CFG Perform a simple rename of CONFIG_MXC_UART_BASE to CFG_MXC_UART_BASE Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0613c36a |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_EXTRA_ENV_SETTINGS to CFG Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
54f80dd2 |
|
02-Dec-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_HOSTNAME et al to Kconfig This converts the following to Kconfig: CONFIG_GATEWAYIP CONFIG_HOSTNAME CONFIG_IPADDR CONFIG_NETMASK CONFIG_ROOTPATH CONFIG_SERVERIP CONFIG_UBOOTPATH To do this, we introduce a CONFIG_USE_ form of each of the above and change include/env_default.h to test for that to be set before setting a value. Further, we don't want to stringify the IP address related values as they are now properly strings via Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aec118eb |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
imx6/imx7: Remove now empty imx6_spl.h and imx7_spl.h There are now no flags being set in these files, so remove them. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
This contributor prefers not to receive mails <noreply@example.com> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
dd11fdc3 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_USB_FLAGS et al to CFG Perform simple renames of: CONFIG_MXC_USB_FLAGS to CFG_MXC_USB_FLAGS CONFIG_MXC_USB_PORT to CFG_MXC_USB_PORT CONFIG_MXC_USB_PORTSC to CFG_MXC_USB_PORTSC Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
4db38665 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_UART_BASE to CFG Perform a simple rename of CONFIG_MXC_UART_BASE to CFG_MXC_UART_BASE Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0613c36a |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_EXTRA_ENV_SETTINGS to CFG Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
54f80dd2 |
|
02-Dec-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_HOSTNAME et al to Kconfig This converts the following to Kconfig: CONFIG_GATEWAYIP CONFIG_HOSTNAME CONFIG_IPADDR CONFIG_NETMASK CONFIG_ROOTPATH CONFIG_SERVERIP CONFIG_UBOOTPATH To do this, we introduce a CONFIG_USE_ form of each of the above and change include/env_default.h to test for that to be set before setting a value. Further, we don't want to stringify the IP address related values as they are now properly strings via Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aec118eb |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
imx6/imx7: Remove now empty imx6_spl.h and imx7_spl.h There are now no flags being set in these files, so remove them. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
dd11fdc3 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_USB_FLAGS et al to CFG Perform simple renames of: CONFIG_MXC_USB_FLAGS to CFG_MXC_USB_FLAGS CONFIG_MXC_USB_PORT to CFG_MXC_USB_PORT CONFIG_MXC_USB_PORTSC to CFG_MXC_USB_PORTSC Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
4db38665 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_UART_BASE to CFG Perform a simple rename of CONFIG_MXC_UART_BASE to CFG_MXC_UART_BASE Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0613c36a |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_EXTRA_ENV_SETTINGS to CFG Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
54f80dd2 |
|
02-Dec-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_HOSTNAME et al to Kconfig This converts the following to Kconfig: CONFIG_GATEWAYIP CONFIG_HOSTNAME CONFIG_IPADDR CONFIG_NETMASK CONFIG_ROOTPATH CONFIG_SERVERIP CONFIG_UBOOTPATH To do this, we introduce a CONFIG_USE_ form of each of the above and change include/env_default.h to test for that to be set before setting a value. Further, we don't want to stringify the IP address related values as they are now properly strings via Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aec118eb |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
imx6/imx7: Remove now empty imx6_spl.h and imx7_spl.h There are now no flags being set in these files, so remove them. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
dd11fdc3 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_USB_FLAGS et al to CFG Perform simple renames of: CONFIG_MXC_USB_FLAGS to CFG_MXC_USB_FLAGS CONFIG_MXC_USB_PORT to CFG_MXC_USB_PORT CONFIG_MXC_USB_PORTSC to CFG_MXC_USB_PORTSC Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
4db38665 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_UART_BASE to CFG Perform a simple rename of CONFIG_MXC_UART_BASE to CFG_MXC_UART_BASE Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0613c36a |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_EXTRA_ENV_SETTINGS to CFG Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
54f80dd2 |
|
02-Dec-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_HOSTNAME et al to Kconfig This converts the following to Kconfig: CONFIG_GATEWAYIP CONFIG_HOSTNAME CONFIG_IPADDR CONFIG_NETMASK CONFIG_ROOTPATH CONFIG_SERVERIP CONFIG_UBOOTPATH To do this, we introduce a CONFIG_USE_ form of each of the above and change include/env_default.h to test for that to be set before setting a value. Further, we don't want to stringify the IP address related values as they are now properly strings via Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aec118eb |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
imx6/imx7: Remove now empty imx6_spl.h and imx7_spl.h There are now no flags being set in these files, so remove them. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
dd11fdc3 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_USB_FLAGS et al to CFG Perform simple renames of: CONFIG_MXC_USB_FLAGS to CFG_MXC_USB_FLAGS CONFIG_MXC_USB_PORT to CFG_MXC_USB_PORT CONFIG_MXC_USB_PORTSC to CFG_MXC_USB_PORTSC Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
4db38665 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_UART_BASE to CFG Perform a simple rename of CONFIG_MXC_UART_BASE to CFG_MXC_UART_BASE Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0613c36a |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_EXTRA_ENV_SETTINGS to CFG Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
54f80dd2 |
|
02-Dec-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_HOSTNAME et al to Kconfig This converts the following to Kconfig: CONFIG_GATEWAYIP CONFIG_HOSTNAME CONFIG_IPADDR CONFIG_NETMASK CONFIG_ROOTPATH CONFIG_SERVERIP CONFIG_UBOOTPATH To do this, we introduce a CONFIG_USE_ form of each of the above and change include/env_default.h to test for that to be set before setting a value. Further, we don't want to stringify the IP address related values as they are now properly strings via Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aec118eb |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
imx6/imx7: Remove now empty imx6_spl.h and imx7_spl.h There are now no flags being set in these files, so remove them. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
dd11fdc3 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_USB_FLAGS et al to CFG Perform simple renames of: CONFIG_MXC_USB_FLAGS to CFG_MXC_USB_FLAGS CONFIG_MXC_USB_PORT to CFG_MXC_USB_PORT CONFIG_MXC_USB_PORTSC to CFG_MXC_USB_PORTSC Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
4db38665 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_UART_BASE to CFG Perform a simple rename of CONFIG_MXC_UART_BASE to CFG_MXC_UART_BASE Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0613c36a |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_EXTRA_ENV_SETTINGS to CFG Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
54f80dd2 |
|
02-Dec-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_HOSTNAME et al to Kconfig This converts the following to Kconfig: CONFIG_GATEWAYIP CONFIG_HOSTNAME CONFIG_IPADDR CONFIG_NETMASK CONFIG_ROOTPATH CONFIG_SERVERIP CONFIG_UBOOTPATH To do this, we introduce a CONFIG_USE_ form of each of the above and change include/env_default.h to test for that to be set before setting a value. Further, we don't want to stringify the IP address related values as they are now properly strings via Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aec118eb |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
imx6/imx7: Remove now empty imx6_spl.h and imx7_spl.h There are now no flags being set in these files, so remove them. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
dd11fdc3 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_USB_FLAGS et al to CFG Perform simple renames of: CONFIG_MXC_USB_FLAGS to CFG_MXC_USB_FLAGS CONFIG_MXC_USB_PORT to CFG_MXC_USB_PORT CONFIG_MXC_USB_PORTSC to CFG_MXC_USB_PORTSC Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
4db38665 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_UART_BASE to CFG Perform a simple rename of CONFIG_MXC_UART_BASE to CFG_MXC_UART_BASE Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0613c36a |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_EXTRA_ENV_SETTINGS to CFG Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
54f80dd2 |
|
02-Dec-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_HOSTNAME et al to Kconfig This converts the following to Kconfig: CONFIG_GATEWAYIP CONFIG_HOSTNAME CONFIG_IPADDR CONFIG_NETMASK CONFIG_ROOTPATH CONFIG_SERVERIP CONFIG_UBOOTPATH To do this, we introduce a CONFIG_USE_ form of each of the above and change include/env_default.h to test for that to be set before setting a value. Further, we don't want to stringify the IP address related values as they are now properly strings via Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aec118eb |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
imx6/imx7: Remove now empty imx6_spl.h and imx7_spl.h There are now no flags being set in these files, so remove them. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
dd11fdc3 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_USB_FLAGS et al to CFG Perform simple renames of: CONFIG_MXC_USB_FLAGS to CFG_MXC_USB_FLAGS CONFIG_MXC_USB_PORT to CFG_MXC_USB_PORT CONFIG_MXC_USB_PORTSC to CFG_MXC_USB_PORTSC Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
4db38665 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_UART_BASE to CFG Perform a simple rename of CONFIG_MXC_UART_BASE to CFG_MXC_UART_BASE Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0613c36a |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_EXTRA_ENV_SETTINGS to CFG Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
54f80dd2 |
|
02-Dec-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_HOSTNAME et al to Kconfig This converts the following to Kconfig: CONFIG_GATEWAYIP CONFIG_HOSTNAME CONFIG_IPADDR CONFIG_NETMASK CONFIG_ROOTPATH CONFIG_SERVERIP CONFIG_UBOOTPATH To do this, we introduce a CONFIG_USE_ form of each of the above and change include/env_default.h to test for that to be set before setting a value. Further, we don't want to stringify the IP address related values as they are now properly strings via Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aec118eb |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
imx6/imx7: Remove now empty imx6_spl.h and imx7_spl.h There are now no flags being set in these files, so remove them. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
dd11fdc3 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_USB_FLAGS et al to CFG Perform simple renames of: CONFIG_MXC_USB_FLAGS to CFG_MXC_USB_FLAGS CONFIG_MXC_USB_PORT to CFG_MXC_USB_PORT CONFIG_MXC_USB_PORTSC to CFG_MXC_USB_PORTSC Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
4db38665 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_UART_BASE to CFG Perform a simple rename of CONFIG_MXC_UART_BASE to CFG_MXC_UART_BASE Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0613c36a |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_EXTRA_ENV_SETTINGS to CFG Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
54f80dd2 |
|
02-Dec-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_HOSTNAME et al to Kconfig This converts the following to Kconfig: CONFIG_GATEWAYIP CONFIG_HOSTNAME CONFIG_IPADDR CONFIG_NETMASK CONFIG_ROOTPATH CONFIG_SERVERIP CONFIG_UBOOTPATH To do this, we introduce a CONFIG_USE_ form of each of the above and change include/env_default.h to test for that to be set before setting a value. Further, we don't want to stringify the IP address related values as they are now properly strings via Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aec118eb |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
imx6/imx7: Remove now empty imx6_spl.h and imx7_spl.h There are now no flags being set in these files, so remove them. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
dd11fdc3 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_USB_FLAGS et al to CFG Perform simple renames of: CONFIG_MXC_USB_FLAGS to CFG_MXC_USB_FLAGS CONFIG_MXC_USB_PORT to CFG_MXC_USB_PORT CONFIG_MXC_USB_PORTSC to CFG_MXC_USB_PORTSC Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
4db38665 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_UART_BASE to CFG Perform a simple rename of CONFIG_MXC_UART_BASE to CFG_MXC_UART_BASE Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0613c36a |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_EXTRA_ENV_SETTINGS to CFG Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
54f80dd2 |
|
02-Dec-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_HOSTNAME et al to Kconfig This converts the following to Kconfig: CONFIG_GATEWAYIP CONFIG_HOSTNAME CONFIG_IPADDR CONFIG_NETMASK CONFIG_ROOTPATH CONFIG_SERVERIP CONFIG_UBOOTPATH To do this, we introduce a CONFIG_USE_ form of each of the above and change include/env_default.h to test for that to be set before setting a value. Further, we don't want to stringify the IP address related values as they are now properly strings via Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aec118eb |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
imx6/imx7: Remove now empty imx6_spl.h and imx7_spl.h There are now no flags being set in these files, so remove them. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
dd11fdc3 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_USB_FLAGS et al to CFG Perform simple renames of: CONFIG_MXC_USB_FLAGS to CFG_MXC_USB_FLAGS CONFIG_MXC_USB_PORT to CFG_MXC_USB_PORT CONFIG_MXC_USB_PORTSC to CFG_MXC_USB_PORTSC Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
4db38665 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_UART_BASE to CFG Perform a simple rename of CONFIG_MXC_UART_BASE to CFG_MXC_UART_BASE Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0613c36a |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_EXTRA_ENV_SETTINGS to CFG Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
54f80dd2 |
|
02-Dec-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_HOSTNAME et al to Kconfig This converts the following to Kconfig: CONFIG_GATEWAYIP CONFIG_HOSTNAME CONFIG_IPADDR CONFIG_NETMASK CONFIG_ROOTPATH CONFIG_SERVERIP CONFIG_UBOOTPATH To do this, we introduce a CONFIG_USE_ form of each of the above and change include/env_default.h to test for that to be set before setting a value. Further, we don't want to stringify the IP address related values as they are now properly strings via Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aec118eb |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
imx6/imx7: Remove now empty imx6_spl.h and imx7_spl.h There are now no flags being set in these files, so remove them. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
dd11fdc3 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_USB_FLAGS et al to CFG Perform simple renames of: CONFIG_MXC_USB_FLAGS to CFG_MXC_USB_FLAGS CONFIG_MXC_USB_PORT to CFG_MXC_USB_PORT CONFIG_MXC_USB_PORTSC to CFG_MXC_USB_PORTSC Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
4db38665 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_UART_BASE to CFG Perform a simple rename of CONFIG_MXC_UART_BASE to CFG_MXC_UART_BASE Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0613c36a |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_EXTRA_ENV_SETTINGS to CFG Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
54f80dd2 |
|
02-Dec-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_HOSTNAME et al to Kconfig This converts the following to Kconfig: CONFIG_GATEWAYIP CONFIG_HOSTNAME CONFIG_IPADDR CONFIG_NETMASK CONFIG_ROOTPATH CONFIG_SERVERIP CONFIG_UBOOTPATH To do this, we introduce a CONFIG_USE_ form of each of the above and change include/env_default.h to test for that to be set before setting a value. Further, we don't want to stringify the IP address related values as they are now properly strings via Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aec118eb |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
imx6/imx7: Remove now empty imx6_spl.h and imx7_spl.h There are now no flags being set in these files, so remove them. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
dd11fdc3 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_USB_FLAGS et al to CFG Perform simple renames of: CONFIG_MXC_USB_FLAGS to CFG_MXC_USB_FLAGS CONFIG_MXC_USB_PORT to CFG_MXC_USB_PORT CONFIG_MXC_USB_PORTSC to CFG_MXC_USB_PORTSC Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
4db38665 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_UART_BASE to CFG Perform a simple rename of CONFIG_MXC_UART_BASE to CFG_MXC_UART_BASE Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0613c36a |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_EXTRA_ENV_SETTINGS to CFG Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
54f80dd2 |
|
02-Dec-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_HOSTNAME et al to Kconfig This converts the following to Kconfig: CONFIG_GATEWAYIP CONFIG_HOSTNAME CONFIG_IPADDR CONFIG_NETMASK CONFIG_ROOTPATH CONFIG_SERVERIP CONFIG_UBOOTPATH To do this, we introduce a CONFIG_USE_ form of each of the above and change include/env_default.h to test for that to be set before setting a value. Further, we don't want to stringify the IP address related values as they are now properly strings via Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aec118eb |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
imx6/imx7: Remove now empty imx6_spl.h and imx7_spl.h There are now no flags being set in these files, so remove them. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
dd11fdc3 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_USB_FLAGS et al to CFG Perform simple renames of: CONFIG_MXC_USB_FLAGS to CFG_MXC_USB_FLAGS CONFIG_MXC_USB_PORT to CFG_MXC_USB_PORT CONFIG_MXC_USB_PORTSC to CFG_MXC_USB_PORTSC Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
4db38665 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_UART_BASE to CFG Perform a simple rename of CONFIG_MXC_UART_BASE to CFG_MXC_UART_BASE Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0613c36a |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_EXTRA_ENV_SETTINGS to CFG Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
54f80dd2 |
|
02-Dec-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_HOSTNAME et al to Kconfig This converts the following to Kconfig: CONFIG_GATEWAYIP CONFIG_HOSTNAME CONFIG_IPADDR CONFIG_NETMASK CONFIG_ROOTPATH CONFIG_SERVERIP CONFIG_UBOOTPATH To do this, we introduce a CONFIG_USE_ form of each of the above and change include/env_default.h to test for that to be set before setting a value. Further, we don't want to stringify the IP address related values as they are now properly strings via Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aec118eb |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
imx6/imx7: Remove now empty imx6_spl.h and imx7_spl.h There are now no flags being set in these files, so remove them. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
dd11fdc3 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_USB_FLAGS et al to CFG Perform simple renames of: CONFIG_MXC_USB_FLAGS to CFG_MXC_USB_FLAGS CONFIG_MXC_USB_PORT to CFG_MXC_USB_PORT CONFIG_MXC_USB_PORTSC to CFG_MXC_USB_PORTSC Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
4db38665 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_UART_BASE to CFG Perform a simple rename of CONFIG_MXC_UART_BASE to CFG_MXC_UART_BASE Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0613c36a |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_EXTRA_ENV_SETTINGS to CFG Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
54f80dd2 |
|
02-Dec-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_HOSTNAME et al to Kconfig This converts the following to Kconfig: CONFIG_GATEWAYIP CONFIG_HOSTNAME CONFIG_IPADDR CONFIG_NETMASK CONFIG_ROOTPATH CONFIG_SERVERIP CONFIG_UBOOTPATH To do this, we introduce a CONFIG_USE_ form of each of the above and change include/env_default.h to test for that to be set before setting a value. Further, we don't want to stringify the IP address related values as they are now properly strings via Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aec118eb |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
imx6/imx7: Remove now empty imx6_spl.h and imx7_spl.h There are now no flags being set in these files, so remove them. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
dd11fdc3 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_USB_FLAGS et al to CFG Perform simple renames of: CONFIG_MXC_USB_FLAGS to CFG_MXC_USB_FLAGS CONFIG_MXC_USB_PORT to CFG_MXC_USB_PORT CONFIG_MXC_USB_PORTSC to CFG_MXC_USB_PORTSC Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
4db38665 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_UART_BASE to CFG Perform a simple rename of CONFIG_MXC_UART_BASE to CFG_MXC_UART_BASE Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0613c36a |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_EXTRA_ENV_SETTINGS to CFG Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
54f80dd2 |
|
02-Dec-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_HOSTNAME et al to Kconfig This converts the following to Kconfig: CONFIG_GATEWAYIP CONFIG_HOSTNAME CONFIG_IPADDR CONFIG_NETMASK CONFIG_ROOTPATH CONFIG_SERVERIP CONFIG_UBOOTPATH To do this, we introduce a CONFIG_USE_ form of each of the above and change include/env_default.h to test for that to be set before setting a value. Further, we don't want to stringify the IP address related values as they are now properly strings via Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aec118eb |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
imx6/imx7: Remove now empty imx6_spl.h and imx7_spl.h There are now no flags being set in these files, so remove them. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
dd11fdc3 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_USB_FLAGS et al to CFG Perform simple renames of: CONFIG_MXC_USB_FLAGS to CFG_MXC_USB_FLAGS CONFIG_MXC_USB_PORT to CFG_MXC_USB_PORT CONFIG_MXC_USB_PORTSC to CFG_MXC_USB_PORTSC Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
4db38665 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_UART_BASE to CFG Perform a simple rename of CONFIG_MXC_UART_BASE to CFG_MXC_UART_BASE Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0613c36a |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_EXTRA_ENV_SETTINGS to CFG Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
54f80dd2 |
|
02-Dec-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_HOSTNAME et al to Kconfig This converts the following to Kconfig: CONFIG_GATEWAYIP CONFIG_HOSTNAME CONFIG_IPADDR CONFIG_NETMASK CONFIG_ROOTPATH CONFIG_SERVERIP CONFIG_UBOOTPATH To do this, we introduce a CONFIG_USE_ form of each of the above and change include/env_default.h to test for that to be set before setting a value. Further, we don't want to stringify the IP address related values as they are now properly strings via Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aec118eb |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
imx6/imx7: Remove now empty imx6_spl.h and imx7_spl.h There are now no flags being set in these files, so remove them. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
dd11fdc3 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_USB_FLAGS et al to CFG Perform simple renames of: CONFIG_MXC_USB_FLAGS to CFG_MXC_USB_FLAGS CONFIG_MXC_USB_PORT to CFG_MXC_USB_PORT CONFIG_MXC_USB_PORTSC to CFG_MXC_USB_PORTSC Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
4db38665 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_UART_BASE to CFG Perform a simple rename of CONFIG_MXC_UART_BASE to CFG_MXC_UART_BASE Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0613c36a |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_EXTRA_ENV_SETTINGS to CFG Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
54f80dd2 |
|
02-Dec-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_HOSTNAME et al to Kconfig This converts the following to Kconfig: CONFIG_GATEWAYIP CONFIG_HOSTNAME CONFIG_IPADDR CONFIG_NETMASK CONFIG_ROOTPATH CONFIG_SERVERIP CONFIG_UBOOTPATH To do this, we introduce a CONFIG_USE_ form of each of the above and change include/env_default.h to test for that to be set before setting a value. Further, we don't want to stringify the IP address related values as they are now properly strings via Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aec118eb |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
imx6/imx7: Remove now empty imx6_spl.h and imx7_spl.h There are now no flags being set in these files, so remove them. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
dd11fdc3 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_USB_FLAGS et al to CFG Perform simple renames of: CONFIG_MXC_USB_FLAGS to CFG_MXC_USB_FLAGS CONFIG_MXC_USB_PORT to CFG_MXC_USB_PORT CONFIG_MXC_USB_PORTSC to CFG_MXC_USB_PORTSC Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
4db38665 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_UART_BASE to CFG Perform a simple rename of CONFIG_MXC_UART_BASE to CFG_MXC_UART_BASE Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0613c36a |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_EXTRA_ENV_SETTINGS to CFG Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
54f80dd2 |
|
02-Dec-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_HOSTNAME et al to Kconfig This converts the following to Kconfig: CONFIG_GATEWAYIP CONFIG_HOSTNAME CONFIG_IPADDR CONFIG_NETMASK CONFIG_ROOTPATH CONFIG_SERVERIP CONFIG_UBOOTPATH To do this, we introduce a CONFIG_USE_ form of each of the above and change include/env_default.h to test for that to be set before setting a value. Further, we don't want to stringify the IP address related values as they are now properly strings via Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aec118eb |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
imx6/imx7: Remove now empty imx6_spl.h and imx7_spl.h There are now no flags being set in these files, so remove them. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
dd11fdc3 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_USB_FLAGS et al to CFG Perform simple renames of: CONFIG_MXC_USB_FLAGS to CFG_MXC_USB_FLAGS CONFIG_MXC_USB_PORT to CFG_MXC_USB_PORT CONFIG_MXC_USB_PORTSC to CFG_MXC_USB_PORTSC Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
4db38665 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_UART_BASE to CFG Perform a simple rename of CONFIG_MXC_UART_BASE to CFG_MXC_UART_BASE Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0613c36a |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_EXTRA_ENV_SETTINGS to CFG Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
54f80dd2 |
|
02-Dec-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_HOSTNAME et al to Kconfig This converts the following to Kconfig: CONFIG_GATEWAYIP CONFIG_HOSTNAME CONFIG_IPADDR CONFIG_NETMASK CONFIG_ROOTPATH CONFIG_SERVERIP CONFIG_UBOOTPATH To do this, we introduce a CONFIG_USE_ form of each of the above and change include/env_default.h to test for that to be set before setting a value. Further, we don't want to stringify the IP address related values as they are now properly strings via Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aec118eb |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
imx6/imx7: Remove now empty imx6_spl.h and imx7_spl.h There are now no flags being set in these files, so remove them. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
dd11fdc3 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_USB_FLAGS et al to CFG Perform simple renames of: CONFIG_MXC_USB_FLAGS to CFG_MXC_USB_FLAGS CONFIG_MXC_USB_PORT to CFG_MXC_USB_PORT CONFIG_MXC_USB_PORTSC to CFG_MXC_USB_PORTSC Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
4db38665 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_UART_BASE to CFG Perform a simple rename of CONFIG_MXC_UART_BASE to CFG_MXC_UART_BASE Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0613c36a |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_EXTRA_ENV_SETTINGS to CFG Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
54f80dd2 |
|
02-Dec-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_HOSTNAME et al to Kconfig This converts the following to Kconfig: CONFIG_GATEWAYIP CONFIG_HOSTNAME CONFIG_IPADDR CONFIG_NETMASK CONFIG_ROOTPATH CONFIG_SERVERIP CONFIG_UBOOTPATH To do this, we introduce a CONFIG_USE_ form of each of the above and change include/env_default.h to test for that to be set before setting a value. Further, we don't want to stringify the IP address related values as they are now properly strings via Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aec118eb |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
imx6/imx7: Remove now empty imx6_spl.h and imx7_spl.h There are now no flags being set in these files, so remove them. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
dd11fdc3 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_USB_FLAGS et al to CFG Perform simple renames of: CONFIG_MXC_USB_FLAGS to CFG_MXC_USB_FLAGS CONFIG_MXC_USB_PORT to CFG_MXC_USB_PORT CONFIG_MXC_USB_PORTSC to CFG_MXC_USB_PORTSC Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
4db38665 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_UART_BASE to CFG Perform a simple rename of CONFIG_MXC_UART_BASE to CFG_MXC_UART_BASE Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0613c36a |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_EXTRA_ENV_SETTINGS to CFG Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
54f80dd2 |
|
02-Dec-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_HOSTNAME et al to Kconfig This converts the following to Kconfig: CONFIG_GATEWAYIP CONFIG_HOSTNAME CONFIG_IPADDR CONFIG_NETMASK CONFIG_ROOTPATH CONFIG_SERVERIP CONFIG_UBOOTPATH To do this, we introduce a CONFIG_USE_ form of each of the above and change include/env_default.h to test for that to be set before setting a value. Further, we don't want to stringify the IP address related values as they are now properly strings via Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aec118eb |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
imx6/imx7: Remove now empty imx6_spl.h and imx7_spl.h There are now no flags being set in these files, so remove them. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
dd11fdc3 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_USB_FLAGS et al to CFG Perform simple renames of: CONFIG_MXC_USB_FLAGS to CFG_MXC_USB_FLAGS CONFIG_MXC_USB_PORT to CFG_MXC_USB_PORT CONFIG_MXC_USB_PORTSC to CFG_MXC_USB_PORTSC Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
4db38665 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_UART_BASE to CFG Perform a simple rename of CONFIG_MXC_UART_BASE to CFG_MXC_UART_BASE Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0613c36a |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_EXTRA_ENV_SETTINGS to CFG Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
54f80dd2 |
|
02-Dec-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_HOSTNAME et al to Kconfig This converts the following to Kconfig: CONFIG_GATEWAYIP CONFIG_HOSTNAME CONFIG_IPADDR CONFIG_NETMASK CONFIG_ROOTPATH CONFIG_SERVERIP CONFIG_UBOOTPATH To do this, we introduce a CONFIG_USE_ form of each of the above and change include/env_default.h to test for that to be set before setting a value. Further, we don't want to stringify the IP address related values as they are now properly strings via Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aec118eb |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
imx6/imx7: Remove now empty imx6_spl.h and imx7_spl.h There are now no flags being set in these files, so remove them. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
dd11fdc3 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_USB_FLAGS et al to CFG Perform simple renames of: CONFIG_MXC_USB_FLAGS to CFG_MXC_USB_FLAGS CONFIG_MXC_USB_PORT to CFG_MXC_USB_PORT CONFIG_MXC_USB_PORTSC to CFG_MXC_USB_PORTSC Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
4db38665 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_UART_BASE to CFG Perform a simple rename of CONFIG_MXC_UART_BASE to CFG_MXC_UART_BASE Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0613c36a |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_EXTRA_ENV_SETTINGS to CFG Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
54f80dd2 |
|
02-Dec-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_HOSTNAME et al to Kconfig This converts the following to Kconfig: CONFIG_GATEWAYIP CONFIG_HOSTNAME CONFIG_IPADDR CONFIG_NETMASK CONFIG_ROOTPATH CONFIG_SERVERIP CONFIG_UBOOTPATH To do this, we introduce a CONFIG_USE_ form of each of the above and change include/env_default.h to test for that to be set before setting a value. Further, we don't want to stringify the IP address related values as they are now properly strings via Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aec118eb |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
imx6/imx7: Remove now empty imx6_spl.h and imx7_spl.h There are now no flags being set in these files, so remove them. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
dd11fdc3 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_USB_FLAGS et al to CFG Perform simple renames of: CONFIG_MXC_USB_FLAGS to CFG_MXC_USB_FLAGS CONFIG_MXC_USB_PORT to CFG_MXC_USB_PORT CONFIG_MXC_USB_PORTSC to CFG_MXC_USB_PORTSC Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
4db38665 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_UART_BASE to CFG Perform a simple rename of CONFIG_MXC_UART_BASE to CFG_MXC_UART_BASE Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0613c36a |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_EXTRA_ENV_SETTINGS to CFG Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
54f80dd2 |
|
02-Dec-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_HOSTNAME et al to Kconfig This converts the following to Kconfig: CONFIG_GATEWAYIP CONFIG_HOSTNAME CONFIG_IPADDR CONFIG_NETMASK CONFIG_ROOTPATH CONFIG_SERVERIP CONFIG_UBOOTPATH To do this, we introduce a CONFIG_USE_ form of each of the above and change include/env_default.h to test for that to be set before setting a value. Further, we don't want to stringify the IP address related values as they are now properly strings via Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aec118eb |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
imx6/imx7: Remove now empty imx6_spl.h and imx7_spl.h There are now no flags being set in these files, so remove them. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
dd11fdc3 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_USB_FLAGS et al to CFG Perform simple renames of: CONFIG_MXC_USB_FLAGS to CFG_MXC_USB_FLAGS CONFIG_MXC_USB_PORT to CFG_MXC_USB_PORT CONFIG_MXC_USB_PORTSC to CFG_MXC_USB_PORTSC Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
4db38665 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_UART_BASE to CFG Perform a simple rename of CONFIG_MXC_UART_BASE to CFG_MXC_UART_BASE Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0613c36a |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_EXTRA_ENV_SETTINGS to CFG Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
54f80dd2 |
|
02-Dec-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_HOSTNAME et al to Kconfig This converts the following to Kconfig: CONFIG_GATEWAYIP CONFIG_HOSTNAME CONFIG_IPADDR CONFIG_NETMASK CONFIG_ROOTPATH CONFIG_SERVERIP CONFIG_UBOOTPATH To do this, we introduce a CONFIG_USE_ form of each of the above and change include/env_default.h to test for that to be set before setting a value. Further, we don't want to stringify the IP address related values as they are now properly strings via Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aec118eb |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
imx6/imx7: Remove now empty imx6_spl.h and imx7_spl.h There are now no flags being set in these files, so remove them. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
dd11fdc3 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_USB_FLAGS et al to CFG Perform simple renames of: CONFIG_MXC_USB_FLAGS to CFG_MXC_USB_FLAGS CONFIG_MXC_USB_PORT to CFG_MXC_USB_PORT CONFIG_MXC_USB_PORTSC to CFG_MXC_USB_PORTSC Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
4db38665 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_UART_BASE to CFG Perform a simple rename of CONFIG_MXC_UART_BASE to CFG_MXC_UART_BASE Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0613c36a |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_EXTRA_ENV_SETTINGS to CFG Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
54f80dd2 |
|
02-Dec-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_HOSTNAME et al to Kconfig This converts the following to Kconfig: CONFIG_GATEWAYIP CONFIG_HOSTNAME CONFIG_IPADDR CONFIG_NETMASK CONFIG_ROOTPATH CONFIG_SERVERIP CONFIG_UBOOTPATH To do this, we introduce a CONFIG_USE_ form of each of the above and change include/env_default.h to test for that to be set before setting a value. Further, we don't want to stringify the IP address related values as they are now properly strings via Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aec118eb |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
imx6/imx7: Remove now empty imx6_spl.h and imx7_spl.h There are now no flags being set in these files, so remove them. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
dd11fdc3 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_USB_FLAGS et al to CFG Perform simple renames of: CONFIG_MXC_USB_FLAGS to CFG_MXC_USB_FLAGS CONFIG_MXC_USB_PORT to CFG_MXC_USB_PORT CONFIG_MXC_USB_PORTSC to CFG_MXC_USB_PORTSC Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
4db38665 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_UART_BASE to CFG Perform a simple rename of CONFIG_MXC_UART_BASE to CFG_MXC_UART_BASE Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0613c36a |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_EXTRA_ENV_SETTINGS to CFG Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
54f80dd2 |
|
02-Dec-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_HOSTNAME et al to Kconfig This converts the following to Kconfig: CONFIG_GATEWAYIP CONFIG_HOSTNAME CONFIG_IPADDR CONFIG_NETMASK CONFIG_ROOTPATH CONFIG_SERVERIP CONFIG_UBOOTPATH To do this, we introduce a CONFIG_USE_ form of each of the above and change include/env_default.h to test for that to be set before setting a value. Further, we don't want to stringify the IP address related values as they are now properly strings via Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aec118eb |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
imx6/imx7: Remove now empty imx6_spl.h and imx7_spl.h There are now no flags being set in these files, so remove them. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
dd11fdc3 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_USB_FLAGS et al to CFG Perform simple renames of: CONFIG_MXC_USB_FLAGS to CFG_MXC_USB_FLAGS CONFIG_MXC_USB_PORT to CFG_MXC_USB_PORT CONFIG_MXC_USB_PORTSC to CFG_MXC_USB_PORTSC Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
4db38665 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_UART_BASE to CFG Perform a simple rename of CONFIG_MXC_UART_BASE to CFG_MXC_UART_BASE Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0613c36a |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_EXTRA_ENV_SETTINGS to CFG Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
54f80dd2 |
|
02-Dec-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_HOSTNAME et al to Kconfig This converts the following to Kconfig: CONFIG_GATEWAYIP CONFIG_HOSTNAME CONFIG_IPADDR CONFIG_NETMASK CONFIG_ROOTPATH CONFIG_SERVERIP CONFIG_UBOOTPATH To do this, we introduce a CONFIG_USE_ form of each of the above and change include/env_default.h to test for that to be set before setting a value. Further, we don't want to stringify the IP address related values as they are now properly strings via Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aec118eb |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
imx6/imx7: Remove now empty imx6_spl.h and imx7_spl.h There are now no flags being set in these files, so remove them. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
dd11fdc3 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_USB_FLAGS et al to CFG Perform simple renames of: CONFIG_MXC_USB_FLAGS to CFG_MXC_USB_FLAGS CONFIG_MXC_USB_PORT to CFG_MXC_USB_PORT CONFIG_MXC_USB_PORTSC to CFG_MXC_USB_PORTSC Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
4db38665 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_UART_BASE to CFG Perform a simple rename of CONFIG_MXC_UART_BASE to CFG_MXC_UART_BASE Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0613c36a |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_EXTRA_ENV_SETTINGS to CFG Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
54f80dd2 |
|
02-Dec-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_HOSTNAME et al to Kconfig This converts the following to Kconfig: CONFIG_GATEWAYIP CONFIG_HOSTNAME CONFIG_IPADDR CONFIG_NETMASK CONFIG_ROOTPATH CONFIG_SERVERIP CONFIG_UBOOTPATH To do this, we introduce a CONFIG_USE_ form of each of the above and change include/env_default.h to test for that to be set before setting a value. Further, we don't want to stringify the IP address related values as they are now properly strings via Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aec118eb |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
imx6/imx7: Remove now empty imx6_spl.h and imx7_spl.h There are now no flags being set in these files, so remove them. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
dd11fdc3 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_USB_FLAGS et al to CFG Perform simple renames of: CONFIG_MXC_USB_FLAGS to CFG_MXC_USB_FLAGS CONFIG_MXC_USB_PORT to CFG_MXC_USB_PORT CONFIG_MXC_USB_PORTSC to CFG_MXC_USB_PORTSC Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
4db38665 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_UART_BASE to CFG Perform a simple rename of CONFIG_MXC_UART_BASE to CFG_MXC_UART_BASE Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0613c36a |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_EXTRA_ENV_SETTINGS to CFG Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
54f80dd2 |
|
02-Dec-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_HOSTNAME et al to Kconfig This converts the following to Kconfig: CONFIG_GATEWAYIP CONFIG_HOSTNAME CONFIG_IPADDR CONFIG_NETMASK CONFIG_ROOTPATH CONFIG_SERVERIP CONFIG_UBOOTPATH To do this, we introduce a CONFIG_USE_ form of each of the above and change include/env_default.h to test for that to be set before setting a value. Further, we don't want to stringify the IP address related values as they are now properly strings via Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aec118eb |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
imx6/imx7: Remove now empty imx6_spl.h and imx7_spl.h There are now no flags being set in these files, so remove them. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
dd11fdc3 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_USB_FLAGS et al to CFG Perform simple renames of: CONFIG_MXC_USB_FLAGS to CFG_MXC_USB_FLAGS CONFIG_MXC_USB_PORT to CFG_MXC_USB_PORT CONFIG_MXC_USB_PORTSC to CFG_MXC_USB_PORTSC Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
4db38665 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_UART_BASE to CFG Perform a simple rename of CONFIG_MXC_UART_BASE to CFG_MXC_UART_BASE Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0613c36a |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_EXTRA_ENV_SETTINGS to CFG Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
54f80dd2 |
|
02-Dec-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_HOSTNAME et al to Kconfig This converts the following to Kconfig: CONFIG_GATEWAYIP CONFIG_HOSTNAME CONFIG_IPADDR CONFIG_NETMASK CONFIG_ROOTPATH CONFIG_SERVERIP CONFIG_UBOOTPATH To do this, we introduce a CONFIG_USE_ form of each of the above and change include/env_default.h to test for that to be set before setting a value. Further, we don't want to stringify the IP address related values as they are now properly strings via Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aec118eb |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
imx6/imx7: Remove now empty imx6_spl.h and imx7_spl.h There are now no flags being set in these files, so remove them. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
dd11fdc3 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_USB_FLAGS et al to CFG Perform simple renames of: CONFIG_MXC_USB_FLAGS to CFG_MXC_USB_FLAGS CONFIG_MXC_USB_PORT to CFG_MXC_USB_PORT CONFIG_MXC_USB_PORTSC to CFG_MXC_USB_PORTSC Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
4db38665 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_UART_BASE to CFG Perform a simple rename of CONFIG_MXC_UART_BASE to CFG_MXC_UART_BASE Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0613c36a |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_EXTRA_ENV_SETTINGS to CFG Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
54f80dd2 |
|
02-Dec-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_HOSTNAME et al to Kconfig This converts the following to Kconfig: CONFIG_GATEWAYIP CONFIG_HOSTNAME CONFIG_IPADDR CONFIG_NETMASK CONFIG_ROOTPATH CONFIG_SERVERIP CONFIG_UBOOTPATH To do this, we introduce a CONFIG_USE_ form of each of the above and change include/env_default.h to test for that to be set before setting a value. Further, we don't want to stringify the IP address related values as they are now properly strings via Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aec118eb |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
imx6/imx7: Remove now empty imx6_spl.h and imx7_spl.h There are now no flags being set in these files, so remove them. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
dd11fdc3 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_USB_FLAGS et al to CFG Perform simple renames of: CONFIG_MXC_USB_FLAGS to CFG_MXC_USB_FLAGS CONFIG_MXC_USB_PORT to CFG_MXC_USB_PORT CONFIG_MXC_USB_PORTSC to CFG_MXC_USB_PORTSC Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
4db38665 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_UART_BASE to CFG Perform a simple rename of CONFIG_MXC_UART_BASE to CFG_MXC_UART_BASE Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0613c36a |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_EXTRA_ENV_SETTINGS to CFG Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
54f80dd2 |
|
02-Dec-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_HOSTNAME et al to Kconfig This converts the following to Kconfig: CONFIG_GATEWAYIP CONFIG_HOSTNAME CONFIG_IPADDR CONFIG_NETMASK CONFIG_ROOTPATH CONFIG_SERVERIP CONFIG_UBOOTPATH To do this, we introduce a CONFIG_USE_ form of each of the above and change include/env_default.h to test for that to be set before setting a value. Further, we don't want to stringify the IP address related values as they are now properly strings via Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aec118eb |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
imx6/imx7: Remove now empty imx6_spl.h and imx7_spl.h There are now no flags being set in these files, so remove them. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
dd11fdc3 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_USB_FLAGS et al to CFG Perform simple renames of: CONFIG_MXC_USB_FLAGS to CFG_MXC_USB_FLAGS CONFIG_MXC_USB_PORT to CFG_MXC_USB_PORT CONFIG_MXC_USB_PORTSC to CFG_MXC_USB_PORTSC Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
4db38665 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_UART_BASE to CFG Perform a simple rename of CONFIG_MXC_UART_BASE to CFG_MXC_UART_BASE Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0613c36a |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_EXTRA_ENV_SETTINGS to CFG Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
54f80dd2 |
|
02-Dec-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_HOSTNAME et al to Kconfig This converts the following to Kconfig: CONFIG_GATEWAYIP CONFIG_HOSTNAME CONFIG_IPADDR CONFIG_NETMASK CONFIG_ROOTPATH CONFIG_SERVERIP CONFIG_UBOOTPATH To do this, we introduce a CONFIG_USE_ form of each of the above and change include/env_default.h to test for that to be set before setting a value. Further, we don't want to stringify the IP address related values as they are now properly strings via Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aec118eb |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
imx6/imx7: Remove now empty imx6_spl.h and imx7_spl.h There are now no flags being set in these files, so remove them. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
dd11fdc3 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_USB_FLAGS et al to CFG Perform simple renames of: CONFIG_MXC_USB_FLAGS to CFG_MXC_USB_FLAGS CONFIG_MXC_USB_PORT to CFG_MXC_USB_PORT CONFIG_MXC_USB_PORTSC to CFG_MXC_USB_PORTSC Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
4db38665 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_UART_BASE to CFG Perform a simple rename of CONFIG_MXC_UART_BASE to CFG_MXC_UART_BASE Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0613c36a |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_EXTRA_ENV_SETTINGS to CFG Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
54f80dd2 |
|
02-Dec-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_HOSTNAME et al to Kconfig This converts the following to Kconfig: CONFIG_GATEWAYIP CONFIG_HOSTNAME CONFIG_IPADDR CONFIG_NETMASK CONFIG_ROOTPATH CONFIG_SERVERIP CONFIG_UBOOTPATH To do this, we introduce a CONFIG_USE_ form of each of the above and change include/env_default.h to test for that to be set before setting a value. Further, we don't want to stringify the IP address related values as they are now properly strings via Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aec118eb |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
imx6/imx7: Remove now empty imx6_spl.h and imx7_spl.h There are now no flags being set in these files, so remove them. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
dd11fdc3 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_USB_FLAGS et al to CFG Perform simple renames of: CONFIG_MXC_USB_FLAGS to CFG_MXC_USB_FLAGS CONFIG_MXC_USB_PORT to CFG_MXC_USB_PORT CONFIG_MXC_USB_PORTSC to CFG_MXC_USB_PORTSC Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
4db38665 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_UART_BASE to CFG Perform a simple rename of CONFIG_MXC_UART_BASE to CFG_MXC_UART_BASE Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0613c36a |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_EXTRA_ENV_SETTINGS to CFG Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
54f80dd2 |
|
02-Dec-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_HOSTNAME et al to Kconfig This converts the following to Kconfig: CONFIG_GATEWAYIP CONFIG_HOSTNAME CONFIG_IPADDR CONFIG_NETMASK CONFIG_ROOTPATH CONFIG_SERVERIP CONFIG_UBOOTPATH To do this, we introduce a CONFIG_USE_ form of each of the above and change include/env_default.h to test for that to be set before setting a value. Further, we don't want to stringify the IP address related values as they are now properly strings via Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aec118eb |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
imx6/imx7: Remove now empty imx6_spl.h and imx7_spl.h There are now no flags being set in these files, so remove them. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
dd11fdc3 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_USB_FLAGS et al to CFG Perform simple renames of: CONFIG_MXC_USB_FLAGS to CFG_MXC_USB_FLAGS CONFIG_MXC_USB_PORT to CFG_MXC_USB_PORT CONFIG_MXC_USB_PORTSC to CFG_MXC_USB_PORTSC Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
4db38665 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_UART_BASE to CFG Perform a simple rename of CONFIG_MXC_UART_BASE to CFG_MXC_UART_BASE Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0613c36a |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_EXTRA_ENV_SETTINGS to CFG Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
54f80dd2 |
|
02-Dec-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_HOSTNAME et al to Kconfig This converts the following to Kconfig: CONFIG_GATEWAYIP CONFIG_HOSTNAME CONFIG_IPADDR CONFIG_NETMASK CONFIG_ROOTPATH CONFIG_SERVERIP CONFIG_UBOOTPATH To do this, we introduce a CONFIG_USE_ form of each of the above and change include/env_default.h to test for that to be set before setting a value. Further, we don't want to stringify the IP address related values as they are now properly strings via Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aec118eb |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
imx6/imx7: Remove now empty imx6_spl.h and imx7_spl.h There are now no flags being set in these files, so remove them. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
dd11fdc3 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_USB_FLAGS et al to CFG Perform simple renames of: CONFIG_MXC_USB_FLAGS to CFG_MXC_USB_FLAGS CONFIG_MXC_USB_PORT to CFG_MXC_USB_PORT CONFIG_MXC_USB_PORTSC to CFG_MXC_USB_PORTSC Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
4db38665 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_UART_BASE to CFG Perform a simple rename of CONFIG_MXC_UART_BASE to CFG_MXC_UART_BASE Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0613c36a |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_EXTRA_ENV_SETTINGS to CFG Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
54f80dd2 |
|
02-Dec-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_HOSTNAME et al to Kconfig This converts the following to Kconfig: CONFIG_GATEWAYIP CONFIG_HOSTNAME CONFIG_IPADDR CONFIG_NETMASK CONFIG_ROOTPATH CONFIG_SERVERIP CONFIG_UBOOTPATH To do this, we introduce a CONFIG_USE_ form of each of the above and change include/env_default.h to test for that to be set before setting a value. Further, we don't want to stringify the IP address related values as they are now properly strings via Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aec118eb |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
imx6/imx7: Remove now empty imx6_spl.h and imx7_spl.h There are now no flags being set in these files, so remove them. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
dd11fdc3 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_USB_FLAGS et al to CFG Perform simple renames of: CONFIG_MXC_USB_FLAGS to CFG_MXC_USB_FLAGS CONFIG_MXC_USB_PORT to CFG_MXC_USB_PORT CONFIG_MXC_USB_PORTSC to CFG_MXC_USB_PORTSC Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
4db38665 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_UART_BASE to CFG Perform a simple rename of CONFIG_MXC_UART_BASE to CFG_MXC_UART_BASE Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0613c36a |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_EXTRA_ENV_SETTINGS to CFG Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
54f80dd2 |
|
02-Dec-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_HOSTNAME et al to Kconfig This converts the following to Kconfig: CONFIG_GATEWAYIP CONFIG_HOSTNAME CONFIG_IPADDR CONFIG_NETMASK CONFIG_ROOTPATH CONFIG_SERVERIP CONFIG_UBOOTPATH To do this, we introduce a CONFIG_USE_ form of each of the above and change include/env_default.h to test for that to be set before setting a value. Further, we don't want to stringify the IP address related values as they are now properly strings via Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aec118eb |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
imx6/imx7: Remove now empty imx6_spl.h and imx7_spl.h There are now no flags being set in these files, so remove them. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
dd11fdc3 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_USB_FLAGS et al to CFG Perform simple renames of: CONFIG_MXC_USB_FLAGS to CFG_MXC_USB_FLAGS CONFIG_MXC_USB_PORT to CFG_MXC_USB_PORT CONFIG_MXC_USB_PORTSC to CFG_MXC_USB_PORTSC Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
4db38665 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_UART_BASE to CFG Perform a simple rename of CONFIG_MXC_UART_BASE to CFG_MXC_UART_BASE Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0613c36a |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_EXTRA_ENV_SETTINGS to CFG Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
54f80dd2 |
|
02-Dec-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_HOSTNAME et al to Kconfig This converts the following to Kconfig: CONFIG_GATEWAYIP CONFIG_HOSTNAME CONFIG_IPADDR CONFIG_NETMASK CONFIG_ROOTPATH CONFIG_SERVERIP CONFIG_UBOOTPATH To do this, we introduce a CONFIG_USE_ form of each of the above and change include/env_default.h to test for that to be set before setting a value. Further, we don't want to stringify the IP address related values as they are now properly strings via Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aec118eb |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
imx6/imx7: Remove now empty imx6_spl.h and imx7_spl.h There are now no flags being set in these files, so remove them. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
dd11fdc3 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_USB_FLAGS et al to CFG Perform simple renames of: CONFIG_MXC_USB_FLAGS to CFG_MXC_USB_FLAGS CONFIG_MXC_USB_PORT to CFG_MXC_USB_PORT CONFIG_MXC_USB_PORTSC to CFG_MXC_USB_PORTSC Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
4db38665 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_UART_BASE to CFG Perform a simple rename of CONFIG_MXC_UART_BASE to CFG_MXC_UART_BASE Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0613c36a |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_EXTRA_ENV_SETTINGS to CFG Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
54f80dd2 |
|
02-Dec-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_HOSTNAME et al to Kconfig This converts the following to Kconfig: CONFIG_GATEWAYIP CONFIG_HOSTNAME CONFIG_IPADDR CONFIG_NETMASK CONFIG_ROOTPATH CONFIG_SERVERIP CONFIG_UBOOTPATH To do this, we introduce a CONFIG_USE_ form of each of the above and change include/env_default.h to test for that to be set before setting a value. Further, we don't want to stringify the IP address related values as they are now properly strings via Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aec118eb |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
imx6/imx7: Remove now empty imx6_spl.h and imx7_spl.h There are now no flags being set in these files, so remove them. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
dd11fdc3 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_USB_FLAGS et al to CFG Perform simple renames of: CONFIG_MXC_USB_FLAGS to CFG_MXC_USB_FLAGS CONFIG_MXC_USB_PORT to CFG_MXC_USB_PORT CONFIG_MXC_USB_PORTSC to CFG_MXC_USB_PORTSC Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
4db38665 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_UART_BASE to CFG Perform a simple rename of CONFIG_MXC_UART_BASE to CFG_MXC_UART_BASE Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0613c36a |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_EXTRA_ENV_SETTINGS to CFG Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
54f80dd2 |
|
02-Dec-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_HOSTNAME et al to Kconfig This converts the following to Kconfig: CONFIG_GATEWAYIP CONFIG_HOSTNAME CONFIG_IPADDR CONFIG_NETMASK CONFIG_ROOTPATH CONFIG_SERVERIP CONFIG_UBOOTPATH To do this, we introduce a CONFIG_USE_ form of each of the above and change include/env_default.h to test for that to be set before setting a value. Further, we don't want to stringify the IP address related values as they are now properly strings via Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aec118eb |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
imx6/imx7: Remove now empty imx6_spl.h and imx7_spl.h There are now no flags being set in these files, so remove them. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
dd11fdc3 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_USB_FLAGS et al to CFG Perform simple renames of: CONFIG_MXC_USB_FLAGS to CFG_MXC_USB_FLAGS CONFIG_MXC_USB_PORT to CFG_MXC_USB_PORT CONFIG_MXC_USB_PORTSC to CFG_MXC_USB_PORTSC Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
4db38665 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_UART_BASE to CFG Perform a simple rename of CONFIG_MXC_UART_BASE to CFG_MXC_UART_BASE Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0613c36a |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_EXTRA_ENV_SETTINGS to CFG Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
54f80dd2 |
|
02-Dec-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_HOSTNAME et al to Kconfig This converts the following to Kconfig: CONFIG_GATEWAYIP CONFIG_HOSTNAME CONFIG_IPADDR CONFIG_NETMASK CONFIG_ROOTPATH CONFIG_SERVERIP CONFIG_UBOOTPATH To do this, we introduce a CONFIG_USE_ form of each of the above and change include/env_default.h to test for that to be set before setting a value. Further, we don't want to stringify the IP address related values as they are now properly strings via Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aec118eb |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
imx6/imx7: Remove now empty imx6_spl.h and imx7_spl.h There are now no flags being set in these files, so remove them. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
dd11fdc3 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_USB_FLAGS et al to CFG Perform simple renames of: CONFIG_MXC_USB_FLAGS to CFG_MXC_USB_FLAGS CONFIG_MXC_USB_PORT to CFG_MXC_USB_PORT CONFIG_MXC_USB_PORTSC to CFG_MXC_USB_PORTSC Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
4db38665 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_UART_BASE to CFG Perform a simple rename of CONFIG_MXC_UART_BASE to CFG_MXC_UART_BASE Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0613c36a |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_EXTRA_ENV_SETTINGS to CFG Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
54f80dd2 |
|
02-Dec-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_HOSTNAME et al to Kconfig This converts the following to Kconfig: CONFIG_GATEWAYIP CONFIG_HOSTNAME CONFIG_IPADDR CONFIG_NETMASK CONFIG_ROOTPATH CONFIG_SERVERIP CONFIG_UBOOTPATH To do this, we introduce a CONFIG_USE_ form of each of the above and change include/env_default.h to test for that to be set before setting a value. Further, we don't want to stringify the IP address related values as they are now properly strings via Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aec118eb |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
imx6/imx7: Remove now empty imx6_spl.h and imx7_spl.h There are now no flags being set in these files, so remove them. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
dd11fdc3 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_USB_FLAGS et al to CFG Perform simple renames of: CONFIG_MXC_USB_FLAGS to CFG_MXC_USB_FLAGS CONFIG_MXC_USB_PORT to CFG_MXC_USB_PORT CONFIG_MXC_USB_PORTSC to CFG_MXC_USB_PORTSC Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
4db38665 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_UART_BASE to CFG Perform a simple rename of CONFIG_MXC_UART_BASE to CFG_MXC_UART_BASE Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0613c36a |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_EXTRA_ENV_SETTINGS to CFG Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
54f80dd2 |
|
02-Dec-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_HOSTNAME et al to Kconfig This converts the following to Kconfig: CONFIG_GATEWAYIP CONFIG_HOSTNAME CONFIG_IPADDR CONFIG_NETMASK CONFIG_ROOTPATH CONFIG_SERVERIP CONFIG_UBOOTPATH To do this, we introduce a CONFIG_USE_ form of each of the above and change include/env_default.h to test for that to be set before setting a value. Further, we don't want to stringify the IP address related values as they are now properly strings via Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aec118eb |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
imx6/imx7: Remove now empty imx6_spl.h and imx7_spl.h There are now no flags being set in these files, so remove them. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
dd11fdc3 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_USB_FLAGS et al to CFG Perform simple renames of: CONFIG_MXC_USB_FLAGS to CFG_MXC_USB_FLAGS CONFIG_MXC_USB_PORT to CFG_MXC_USB_PORT CONFIG_MXC_USB_PORTSC to CFG_MXC_USB_PORTSC Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
4db38665 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_UART_BASE to CFG Perform a simple rename of CONFIG_MXC_UART_BASE to CFG_MXC_UART_BASE Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0613c36a |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_EXTRA_ENV_SETTINGS to CFG Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
54f80dd2 |
|
02-Dec-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_HOSTNAME et al to Kconfig This converts the following to Kconfig: CONFIG_GATEWAYIP CONFIG_HOSTNAME CONFIG_IPADDR CONFIG_NETMASK CONFIG_ROOTPATH CONFIG_SERVERIP CONFIG_UBOOTPATH To do this, we introduce a CONFIG_USE_ form of each of the above and change include/env_default.h to test for that to be set before setting a value. Further, we don't want to stringify the IP address related values as they are now properly strings via Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aec118eb |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
imx6/imx7: Remove now empty imx6_spl.h and imx7_spl.h There are now no flags being set in these files, so remove them. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
dd11fdc3 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_USB_FLAGS et al to CFG Perform simple renames of: CONFIG_MXC_USB_FLAGS to CFG_MXC_USB_FLAGS CONFIG_MXC_USB_PORT to CFG_MXC_USB_PORT CONFIG_MXC_USB_PORTSC to CFG_MXC_USB_PORTSC Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
4db38665 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_UART_BASE to CFG Perform a simple rename of CONFIG_MXC_UART_BASE to CFG_MXC_UART_BASE Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0613c36a |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_EXTRA_ENV_SETTINGS to CFG Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
54f80dd2 |
|
02-Dec-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_HOSTNAME et al to Kconfig This converts the following to Kconfig: CONFIG_GATEWAYIP CONFIG_HOSTNAME CONFIG_IPADDR CONFIG_NETMASK CONFIG_ROOTPATH CONFIG_SERVERIP CONFIG_UBOOTPATH To do this, we introduce a CONFIG_USE_ form of each of the above and change include/env_default.h to test for that to be set before setting a value. Further, we don't want to stringify the IP address related values as they are now properly strings via Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aec118eb |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
imx6/imx7: Remove now empty imx6_spl.h and imx7_spl.h There are now no flags being set in these files, so remove them. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
dd11fdc3 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_USB_FLAGS et al to CFG Perform simple renames of: CONFIG_MXC_USB_FLAGS to CFG_MXC_USB_FLAGS CONFIG_MXC_USB_PORT to CFG_MXC_USB_PORT CONFIG_MXC_USB_PORTSC to CFG_MXC_USB_PORTSC Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
4db38665 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_UART_BASE to CFG Perform a simple rename of CONFIG_MXC_UART_BASE to CFG_MXC_UART_BASE Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0613c36a |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_EXTRA_ENV_SETTINGS to CFG Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
54f80dd2 |
|
02-Dec-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_HOSTNAME et al to Kconfig This converts the following to Kconfig: CONFIG_GATEWAYIP CONFIG_HOSTNAME CONFIG_IPADDR CONFIG_NETMASK CONFIG_ROOTPATH CONFIG_SERVERIP CONFIG_UBOOTPATH To do this, we introduce a CONFIG_USE_ form of each of the above and change include/env_default.h to test for that to be set before setting a value. Further, we don't want to stringify the IP address related values as they are now properly strings via Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aec118eb |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
imx6/imx7: Remove now empty imx6_spl.h and imx7_spl.h There are now no flags being set in these files, so remove them. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
dd11fdc3 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_USB_FLAGS et al to CFG Perform simple renames of: CONFIG_MXC_USB_FLAGS to CFG_MXC_USB_FLAGS CONFIG_MXC_USB_PORT to CFG_MXC_USB_PORT CONFIG_MXC_USB_PORTSC to CFG_MXC_USB_PORTSC Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
4db38665 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_UART_BASE to CFG Perform a simple rename of CONFIG_MXC_UART_BASE to CFG_MXC_UART_BASE Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0613c36a |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_EXTRA_ENV_SETTINGS to CFG Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
54f80dd2 |
|
02-Dec-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_HOSTNAME et al to Kconfig This converts the following to Kconfig: CONFIG_GATEWAYIP CONFIG_HOSTNAME CONFIG_IPADDR CONFIG_NETMASK CONFIG_ROOTPATH CONFIG_SERVERIP CONFIG_UBOOTPATH To do this, we introduce a CONFIG_USE_ form of each of the above and change include/env_default.h to test for that to be set before setting a value. Further, we don't want to stringify the IP address related values as they are now properly strings via Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aec118eb |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
imx6/imx7: Remove now empty imx6_spl.h and imx7_spl.h There are now no flags being set in these files, so remove them. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
dd11fdc3 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_USB_FLAGS et al to CFG Perform simple renames of: CONFIG_MXC_USB_FLAGS to CFG_MXC_USB_FLAGS CONFIG_MXC_USB_PORT to CFG_MXC_USB_PORT CONFIG_MXC_USB_PORTSC to CFG_MXC_USB_PORTSC Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
4db38665 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_UART_BASE to CFG Perform a simple rename of CONFIG_MXC_UART_BASE to CFG_MXC_UART_BASE Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0613c36a |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_EXTRA_ENV_SETTINGS to CFG Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
54f80dd2 |
|
02-Dec-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_HOSTNAME et al to Kconfig This converts the following to Kconfig: CONFIG_GATEWAYIP CONFIG_HOSTNAME CONFIG_IPADDR CONFIG_NETMASK CONFIG_ROOTPATH CONFIG_SERVERIP CONFIG_UBOOTPATH To do this, we introduce a CONFIG_USE_ form of each of the above and change include/env_default.h to test for that to be set before setting a value. Further, we don't want to stringify the IP address related values as they are now properly strings via Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aec118eb |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
imx6/imx7: Remove now empty imx6_spl.h and imx7_spl.h There are now no flags being set in these files, so remove them. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
dd11fdc3 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_USB_FLAGS et al to CFG Perform simple renames of: CONFIG_MXC_USB_FLAGS to CFG_MXC_USB_FLAGS CONFIG_MXC_USB_PORT to CFG_MXC_USB_PORT CONFIG_MXC_USB_PORTSC to CFG_MXC_USB_PORTSC Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
4db38665 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_UART_BASE to CFG Perform a simple rename of CONFIG_MXC_UART_BASE to CFG_MXC_UART_BASE Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0613c36a |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_EXTRA_ENV_SETTINGS to CFG Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
54f80dd2 |
|
02-Dec-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_HOSTNAME et al to Kconfig This converts the following to Kconfig: CONFIG_GATEWAYIP CONFIG_HOSTNAME CONFIG_IPADDR CONFIG_NETMASK CONFIG_ROOTPATH CONFIG_SERVERIP CONFIG_UBOOTPATH To do this, we introduce a CONFIG_USE_ form of each of the above and change include/env_default.h to test for that to be set before setting a value. Further, we don't want to stringify the IP address related values as they are now properly strings via Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aec118eb |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
imx6/imx7: Remove now empty imx6_spl.h and imx7_spl.h There are now no flags being set in these files, so remove them. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
dd11fdc3 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_USB_FLAGS et al to CFG Perform simple renames of: CONFIG_MXC_USB_FLAGS to CFG_MXC_USB_FLAGS CONFIG_MXC_USB_PORT to CFG_MXC_USB_PORT CONFIG_MXC_USB_PORTSC to CFG_MXC_USB_PORTSC Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
4db38665 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_UART_BASE to CFG Perform a simple rename of CONFIG_MXC_UART_BASE to CFG_MXC_UART_BASE Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0613c36a |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_EXTRA_ENV_SETTINGS to CFG Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
54f80dd2 |
|
02-Dec-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_HOSTNAME et al to Kconfig This converts the following to Kconfig: CONFIG_GATEWAYIP CONFIG_HOSTNAME CONFIG_IPADDR CONFIG_NETMASK CONFIG_ROOTPATH CONFIG_SERVERIP CONFIG_UBOOTPATH To do this, we introduce a CONFIG_USE_ form of each of the above and change include/env_default.h to test for that to be set before setting a value. Further, we don't want to stringify the IP address related values as they are now properly strings via Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aec118eb |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
imx6/imx7: Remove now empty imx6_spl.h and imx7_spl.h There are now no flags being set in these files, so remove them. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
dd11fdc3 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_USB_FLAGS et al to CFG Perform simple renames of: CONFIG_MXC_USB_FLAGS to CFG_MXC_USB_FLAGS CONFIG_MXC_USB_PORT to CFG_MXC_USB_PORT CONFIG_MXC_USB_PORTSC to CFG_MXC_USB_PORTSC Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
4db38665 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_UART_BASE to CFG Perform a simple rename of CONFIG_MXC_UART_BASE to CFG_MXC_UART_BASE Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0613c36a |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_EXTRA_ENV_SETTINGS to CFG Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
54f80dd2 |
|
02-Dec-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_HOSTNAME et al to Kconfig This converts the following to Kconfig: CONFIG_GATEWAYIP CONFIG_HOSTNAME CONFIG_IPADDR CONFIG_NETMASK CONFIG_ROOTPATH CONFIG_SERVERIP CONFIG_UBOOTPATH To do this, we introduce a CONFIG_USE_ form of each of the above and change include/env_default.h to test for that to be set before setting a value. Further, we don't want to stringify the IP address related values as they are now properly strings via Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aec118eb |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
imx6/imx7: Remove now empty imx6_spl.h and imx7_spl.h There are now no flags being set in these files, so remove them. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
dd11fdc3 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_USB_FLAGS et al to CFG Perform simple renames of: CONFIG_MXC_USB_FLAGS to CFG_MXC_USB_FLAGS CONFIG_MXC_USB_PORT to CFG_MXC_USB_PORT CONFIG_MXC_USB_PORTSC to CFG_MXC_USB_PORTSC Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
4db38665 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_UART_BASE to CFG Perform a simple rename of CONFIG_MXC_UART_BASE to CFG_MXC_UART_BASE Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0613c36a |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_EXTRA_ENV_SETTINGS to CFG Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
54f80dd2 |
|
02-Dec-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_HOSTNAME et al to Kconfig This converts the following to Kconfig: CONFIG_GATEWAYIP CONFIG_HOSTNAME CONFIG_IPADDR CONFIG_NETMASK CONFIG_ROOTPATH CONFIG_SERVERIP CONFIG_UBOOTPATH To do this, we introduce a CONFIG_USE_ form of each of the above and change include/env_default.h to test for that to be set before setting a value. Further, we don't want to stringify the IP address related values as they are now properly strings via Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aec118eb |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
imx6/imx7: Remove now empty imx6_spl.h and imx7_spl.h There are now no flags being set in these files, so remove them. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
dd11fdc3 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_USB_FLAGS et al to CFG Perform simple renames of: CONFIG_MXC_USB_FLAGS to CFG_MXC_USB_FLAGS CONFIG_MXC_USB_PORT to CFG_MXC_USB_PORT CONFIG_MXC_USB_PORTSC to CFG_MXC_USB_PORTSC Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
4db38665 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_UART_BASE to CFG Perform a simple rename of CONFIG_MXC_UART_BASE to CFG_MXC_UART_BASE Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0613c36a |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_EXTRA_ENV_SETTINGS to CFG Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
54f80dd2 |
|
02-Dec-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_HOSTNAME et al to Kconfig This converts the following to Kconfig: CONFIG_GATEWAYIP CONFIG_HOSTNAME CONFIG_IPADDR CONFIG_NETMASK CONFIG_ROOTPATH CONFIG_SERVERIP CONFIG_UBOOTPATH To do this, we introduce a CONFIG_USE_ form of each of the above and change include/env_default.h to test for that to be set before setting a value. Further, we don't want to stringify the IP address related values as they are now properly strings via Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aec118eb |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
imx6/imx7: Remove now empty imx6_spl.h and imx7_spl.h There are now no flags being set in these files, so remove them. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
dd11fdc3 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_USB_FLAGS et al to CFG Perform simple renames of: CONFIG_MXC_USB_FLAGS to CFG_MXC_USB_FLAGS CONFIG_MXC_USB_PORT to CFG_MXC_USB_PORT CONFIG_MXC_USB_PORTSC to CFG_MXC_USB_PORTSC Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
4db38665 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_UART_BASE to CFG Perform a simple rename of CONFIG_MXC_UART_BASE to CFG_MXC_UART_BASE Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0613c36a |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_EXTRA_ENV_SETTINGS to CFG Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
54f80dd2 |
|
02-Dec-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_HOSTNAME et al to Kconfig This converts the following to Kconfig: CONFIG_GATEWAYIP CONFIG_HOSTNAME CONFIG_IPADDR CONFIG_NETMASK CONFIG_ROOTPATH CONFIG_SERVERIP CONFIG_UBOOTPATH To do this, we introduce a CONFIG_USE_ form of each of the above and change include/env_default.h to test for that to be set before setting a value. Further, we don't want to stringify the IP address related values as they are now properly strings via Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aec118eb |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
imx6/imx7: Remove now empty imx6_spl.h and imx7_spl.h There are now no flags being set in these files, so remove them. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
dd11fdc3 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_USB_FLAGS et al to CFG Perform simple renames of: CONFIG_MXC_USB_FLAGS to CFG_MXC_USB_FLAGS CONFIG_MXC_USB_PORT to CFG_MXC_USB_PORT CONFIG_MXC_USB_PORTSC to CFG_MXC_USB_PORTSC Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
4db38665 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_UART_BASE to CFG Perform a simple rename of CONFIG_MXC_UART_BASE to CFG_MXC_UART_BASE Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0613c36a |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_EXTRA_ENV_SETTINGS to CFG Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
54f80dd2 |
|
02-Dec-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_HOSTNAME et al to Kconfig This converts the following to Kconfig: CONFIG_GATEWAYIP CONFIG_HOSTNAME CONFIG_IPADDR CONFIG_NETMASK CONFIG_ROOTPATH CONFIG_SERVERIP CONFIG_UBOOTPATH To do this, we introduce a CONFIG_USE_ form of each of the above and change include/env_default.h to test for that to be set before setting a value. Further, we don't want to stringify the IP address related values as they are now properly strings via Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aec118eb |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
imx6/imx7: Remove now empty imx6_spl.h and imx7_spl.h There are now no flags being set in these files, so remove them. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
dd11fdc3 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_USB_FLAGS et al to CFG Perform simple renames of: CONFIG_MXC_USB_FLAGS to CFG_MXC_USB_FLAGS CONFIG_MXC_USB_PORT to CFG_MXC_USB_PORT CONFIG_MXC_USB_PORTSC to CFG_MXC_USB_PORTSC Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
4db38665 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_UART_BASE to CFG Perform a simple rename of CONFIG_MXC_UART_BASE to CFG_MXC_UART_BASE Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0613c36a |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_EXTRA_ENV_SETTINGS to CFG Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
54f80dd2 |
|
02-Dec-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_HOSTNAME et al to Kconfig This converts the following to Kconfig: CONFIG_GATEWAYIP CONFIG_HOSTNAME CONFIG_IPADDR CONFIG_NETMASK CONFIG_ROOTPATH CONFIG_SERVERIP CONFIG_UBOOTPATH To do this, we introduce a CONFIG_USE_ form of each of the above and change include/env_default.h to test for that to be set before setting a value. Further, we don't want to stringify the IP address related values as they are now properly strings via Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aec118eb |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
imx6/imx7: Remove now empty imx6_spl.h and imx7_spl.h There are now no flags being set in these files, so remove them. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
dd11fdc3 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_USB_FLAGS et al to CFG Perform simple renames of: CONFIG_MXC_USB_FLAGS to CFG_MXC_USB_FLAGS CONFIG_MXC_USB_PORT to CFG_MXC_USB_PORT CONFIG_MXC_USB_PORTSC to CFG_MXC_USB_PORTSC Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
4db38665 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_UART_BASE to CFG Perform a simple rename of CONFIG_MXC_UART_BASE to CFG_MXC_UART_BASE Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0613c36a |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_EXTRA_ENV_SETTINGS to CFG Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
54f80dd2 |
|
02-Dec-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_HOSTNAME et al to Kconfig This converts the following to Kconfig: CONFIG_GATEWAYIP CONFIG_HOSTNAME CONFIG_IPADDR CONFIG_NETMASK CONFIG_ROOTPATH CONFIG_SERVERIP CONFIG_UBOOTPATH To do this, we introduce a CONFIG_USE_ form of each of the above and change include/env_default.h to test for that to be set before setting a value. Further, we don't want to stringify the IP address related values as they are now properly strings via Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aec118eb |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
imx6/imx7: Remove now empty imx6_spl.h and imx7_spl.h There are now no flags being set in these files, so remove them. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
dd11fdc3 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_USB_FLAGS et al to CFG Perform simple renames of: CONFIG_MXC_USB_FLAGS to CFG_MXC_USB_FLAGS CONFIG_MXC_USB_PORT to CFG_MXC_USB_PORT CONFIG_MXC_USB_PORTSC to CFG_MXC_USB_PORTSC Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
4db38665 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_UART_BASE to CFG Perform a simple rename of CONFIG_MXC_UART_BASE to CFG_MXC_UART_BASE Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0613c36a |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_EXTRA_ENV_SETTINGS to CFG Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
54f80dd2 |
|
02-Dec-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_HOSTNAME et al to Kconfig This converts the following to Kconfig: CONFIG_GATEWAYIP CONFIG_HOSTNAME CONFIG_IPADDR CONFIG_NETMASK CONFIG_ROOTPATH CONFIG_SERVERIP CONFIG_UBOOTPATH To do this, we introduce a CONFIG_USE_ form of each of the above and change include/env_default.h to test for that to be set before setting a value. Further, we don't want to stringify the IP address related values as they are now properly strings via Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aec118eb |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
imx6/imx7: Remove now empty imx6_spl.h and imx7_spl.h There are now no flags being set in these files, so remove them. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
dd11fdc3 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_USB_FLAGS et al to CFG Perform simple renames of: CONFIG_MXC_USB_FLAGS to CFG_MXC_USB_FLAGS CONFIG_MXC_USB_PORT to CFG_MXC_USB_PORT CONFIG_MXC_USB_PORTSC to CFG_MXC_USB_PORTSC Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
4db38665 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_UART_BASE to CFG Perform a simple rename of CONFIG_MXC_UART_BASE to CFG_MXC_UART_BASE Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0613c36a |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_EXTRA_ENV_SETTINGS to CFG Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
54f80dd2 |
|
02-Dec-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_HOSTNAME et al to Kconfig This converts the following to Kconfig: CONFIG_GATEWAYIP CONFIG_HOSTNAME CONFIG_IPADDR CONFIG_NETMASK CONFIG_ROOTPATH CONFIG_SERVERIP CONFIG_UBOOTPATH To do this, we introduce a CONFIG_USE_ form of each of the above and change include/env_default.h to test for that to be set before setting a value. Further, we don't want to stringify the IP address related values as they are now properly strings via Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aec118eb |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
imx6/imx7: Remove now empty imx6_spl.h and imx7_spl.h There are now no flags being set in these files, so remove them. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
dd11fdc3 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_USB_FLAGS et al to CFG Perform simple renames of: CONFIG_MXC_USB_FLAGS to CFG_MXC_USB_FLAGS CONFIG_MXC_USB_PORT to CFG_MXC_USB_PORT CONFIG_MXC_USB_PORTSC to CFG_MXC_USB_PORTSC Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
4db38665 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_UART_BASE to CFG Perform a simple rename of CONFIG_MXC_UART_BASE to CFG_MXC_UART_BASE Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0613c36a |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_EXTRA_ENV_SETTINGS to CFG Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
54f80dd2 |
|
02-Dec-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_HOSTNAME et al to Kconfig This converts the following to Kconfig: CONFIG_GATEWAYIP CONFIG_HOSTNAME CONFIG_IPADDR CONFIG_NETMASK CONFIG_ROOTPATH CONFIG_SERVERIP CONFIG_UBOOTPATH To do this, we introduce a CONFIG_USE_ form of each of the above and change include/env_default.h to test for that to be set before setting a value. Further, we don't want to stringify the IP address related values as they are now properly strings via Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aec118eb |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
imx6/imx7: Remove now empty imx6_spl.h and imx7_spl.h There are now no flags being set in these files, so remove them. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
dd11fdc3 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_USB_FLAGS et al to CFG Perform simple renames of: CONFIG_MXC_USB_FLAGS to CFG_MXC_USB_FLAGS CONFIG_MXC_USB_PORT to CFG_MXC_USB_PORT CONFIG_MXC_USB_PORTSC to CFG_MXC_USB_PORTSC Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
4db38665 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_UART_BASE to CFG Perform a simple rename of CONFIG_MXC_UART_BASE to CFG_MXC_UART_BASE Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0613c36a |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_EXTRA_ENV_SETTINGS to CFG Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
54f80dd2 |
|
02-Dec-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_HOSTNAME et al to Kconfig This converts the following to Kconfig: CONFIG_GATEWAYIP CONFIG_HOSTNAME CONFIG_IPADDR CONFIG_NETMASK CONFIG_ROOTPATH CONFIG_SERVERIP CONFIG_UBOOTPATH To do this, we introduce a CONFIG_USE_ form of each of the above and change include/env_default.h to test for that to be set before setting a value. Further, we don't want to stringify the IP address related values as they are now properly strings via Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aec118eb |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
imx6/imx7: Remove now empty imx6_spl.h and imx7_spl.h There are now no flags being set in these files, so remove them. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
dd11fdc3 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_USB_FLAGS et al to CFG Perform simple renames of: CONFIG_MXC_USB_FLAGS to CFG_MXC_USB_FLAGS CONFIG_MXC_USB_PORT to CFG_MXC_USB_PORT CONFIG_MXC_USB_PORTSC to CFG_MXC_USB_PORTSC Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
4db38665 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_UART_BASE to CFG Perform a simple rename of CONFIG_MXC_UART_BASE to CFG_MXC_UART_BASE Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0613c36a |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_EXTRA_ENV_SETTINGS to CFG Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
54f80dd2 |
|
02-Dec-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_HOSTNAME et al to Kconfig This converts the following to Kconfig: CONFIG_GATEWAYIP CONFIG_HOSTNAME CONFIG_IPADDR CONFIG_NETMASK CONFIG_ROOTPATH CONFIG_SERVERIP CONFIG_UBOOTPATH To do this, we introduce a CONFIG_USE_ form of each of the above and change include/env_default.h to test for that to be set before setting a value. Further, we don't want to stringify the IP address related values as they are now properly strings via Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aec118eb |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
imx6/imx7: Remove now empty imx6_spl.h and imx7_spl.h There are now no flags being set in these files, so remove them. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
dd11fdc3 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_USB_FLAGS et al to CFG Perform simple renames of: CONFIG_MXC_USB_FLAGS to CFG_MXC_USB_FLAGS CONFIG_MXC_USB_PORT to CFG_MXC_USB_PORT CONFIG_MXC_USB_PORTSC to CFG_MXC_USB_PORTSC Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
4db38665 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_UART_BASE to CFG Perform a simple rename of CONFIG_MXC_UART_BASE to CFG_MXC_UART_BASE Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0613c36a |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_EXTRA_ENV_SETTINGS to CFG Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
54f80dd2 |
|
02-Dec-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_HOSTNAME et al to Kconfig This converts the following to Kconfig: CONFIG_GATEWAYIP CONFIG_HOSTNAME CONFIG_IPADDR CONFIG_NETMASK CONFIG_ROOTPATH CONFIG_SERVERIP CONFIG_UBOOTPATH To do this, we introduce a CONFIG_USE_ form of each of the above and change include/env_default.h to test for that to be set before setting a value. Further, we don't want to stringify the IP address related values as they are now properly strings via Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aec118eb |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
imx6/imx7: Remove now empty imx6_spl.h and imx7_spl.h There are now no flags being set in these files, so remove them. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
dd11fdc3 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_USB_FLAGS et al to CFG Perform simple renames of: CONFIG_MXC_USB_FLAGS to CFG_MXC_USB_FLAGS CONFIG_MXC_USB_PORT to CFG_MXC_USB_PORT CONFIG_MXC_USB_PORTSC to CFG_MXC_USB_PORTSC Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
4db38665 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_UART_BASE to CFG Perform a simple rename of CONFIG_MXC_UART_BASE to CFG_MXC_UART_BASE Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0613c36a |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_EXTRA_ENV_SETTINGS to CFG Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
54f80dd2 |
|
02-Dec-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_HOSTNAME et al to Kconfig This converts the following to Kconfig: CONFIG_GATEWAYIP CONFIG_HOSTNAME CONFIG_IPADDR CONFIG_NETMASK CONFIG_ROOTPATH CONFIG_SERVERIP CONFIG_UBOOTPATH To do this, we introduce a CONFIG_USE_ form of each of the above and change include/env_default.h to test for that to be set before setting a value. Further, we don't want to stringify the IP address related values as they are now properly strings via Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aec118eb |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
imx6/imx7: Remove now empty imx6_spl.h and imx7_spl.h There are now no flags being set in these files, so remove them. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
dd11fdc3 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_USB_FLAGS et al to CFG Perform simple renames of: CONFIG_MXC_USB_FLAGS to CFG_MXC_USB_FLAGS CONFIG_MXC_USB_PORT to CFG_MXC_USB_PORT CONFIG_MXC_USB_PORTSC to CFG_MXC_USB_PORTSC Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
4db38665 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_UART_BASE to CFG Perform a simple rename of CONFIG_MXC_UART_BASE to CFG_MXC_UART_BASE Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0613c36a |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_EXTRA_ENV_SETTINGS to CFG Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
54f80dd2 |
|
02-Dec-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_HOSTNAME et al to Kconfig This converts the following to Kconfig: CONFIG_GATEWAYIP CONFIG_HOSTNAME CONFIG_IPADDR CONFIG_NETMASK CONFIG_ROOTPATH CONFIG_SERVERIP CONFIG_UBOOTPATH To do this, we introduce a CONFIG_USE_ form of each of the above and change include/env_default.h to test for that to be set before setting a value. Further, we don't want to stringify the IP address related values as they are now properly strings via Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aec118eb |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
imx6/imx7: Remove now empty imx6_spl.h and imx7_spl.h There are now no flags being set in these files, so remove them. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
dd11fdc3 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_USB_FLAGS et al to CFG Perform simple renames of: CONFIG_MXC_USB_FLAGS to CFG_MXC_USB_FLAGS CONFIG_MXC_USB_PORT to CFG_MXC_USB_PORT CONFIG_MXC_USB_PORTSC to CFG_MXC_USB_PORTSC Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
4db38665 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_UART_BASE to CFG Perform a simple rename of CONFIG_MXC_UART_BASE to CFG_MXC_UART_BASE Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0613c36a |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_EXTRA_ENV_SETTINGS to CFG Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
54f80dd2 |
|
02-Dec-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_HOSTNAME et al to Kconfig This converts the following to Kconfig: CONFIG_GATEWAYIP CONFIG_HOSTNAME CONFIG_IPADDR CONFIG_NETMASK CONFIG_ROOTPATH CONFIG_SERVERIP CONFIG_UBOOTPATH To do this, we introduce a CONFIG_USE_ form of each of the above and change include/env_default.h to test for that to be set before setting a value. Further, we don't want to stringify the IP address related values as they are now properly strings via Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aec118eb |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
imx6/imx7: Remove now empty imx6_spl.h and imx7_spl.h There are now no flags being set in these files, so remove them. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
dd11fdc3 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_USB_FLAGS et al to CFG Perform simple renames of: CONFIG_MXC_USB_FLAGS to CFG_MXC_USB_FLAGS CONFIG_MXC_USB_PORT to CFG_MXC_USB_PORT CONFIG_MXC_USB_PORTSC to CFG_MXC_USB_PORTSC Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
4db38665 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_UART_BASE to CFG Perform a simple rename of CONFIG_MXC_UART_BASE to CFG_MXC_UART_BASE Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0613c36a |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_EXTRA_ENV_SETTINGS to CFG Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
54f80dd2 |
|
02-Dec-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_HOSTNAME et al to Kconfig This converts the following to Kconfig: CONFIG_GATEWAYIP CONFIG_HOSTNAME CONFIG_IPADDR CONFIG_NETMASK CONFIG_ROOTPATH CONFIG_SERVERIP CONFIG_UBOOTPATH To do this, we introduce a CONFIG_USE_ form of each of the above and change include/env_default.h to test for that to be set before setting a value. Further, we don't want to stringify the IP address related values as they are now properly strings via Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aec118eb |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
imx6/imx7: Remove now empty imx6_spl.h and imx7_spl.h There are now no flags being set in these files, so remove them. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
dd11fdc3 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_USB_FLAGS et al to CFG Perform simple renames of: CONFIG_MXC_USB_FLAGS to CFG_MXC_USB_FLAGS CONFIG_MXC_USB_PORT to CFG_MXC_USB_PORT CONFIG_MXC_USB_PORTSC to CFG_MXC_USB_PORTSC Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
4db38665 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_UART_BASE to CFG Perform a simple rename of CONFIG_MXC_UART_BASE to CFG_MXC_UART_BASE Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0613c36a |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_EXTRA_ENV_SETTINGS to CFG Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
54f80dd2 |
|
02-Dec-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_HOSTNAME et al to Kconfig This converts the following to Kconfig: CONFIG_GATEWAYIP CONFIG_HOSTNAME CONFIG_IPADDR CONFIG_NETMASK CONFIG_ROOTPATH CONFIG_SERVERIP CONFIG_UBOOTPATH To do this, we introduce a CONFIG_USE_ form of each of the above and change include/env_default.h to test for that to be set before setting a value. Further, we don't want to stringify the IP address related values as they are now properly strings via Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aec118eb |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
imx6/imx7: Remove now empty imx6_spl.h and imx7_spl.h There are now no flags being set in these files, so remove them. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
dd11fdc3 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_USB_FLAGS et al to CFG Perform simple renames of: CONFIG_MXC_USB_FLAGS to CFG_MXC_USB_FLAGS CONFIG_MXC_USB_PORT to CFG_MXC_USB_PORT CONFIG_MXC_USB_PORTSC to CFG_MXC_USB_PORTSC Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
4db38665 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_UART_BASE to CFG Perform a simple rename of CONFIG_MXC_UART_BASE to CFG_MXC_UART_BASE Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0613c36a |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_EXTRA_ENV_SETTINGS to CFG Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
54f80dd2 |
|
02-Dec-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_HOSTNAME et al to Kconfig This converts the following to Kconfig: CONFIG_GATEWAYIP CONFIG_HOSTNAME CONFIG_IPADDR CONFIG_NETMASK CONFIG_ROOTPATH CONFIG_SERVERIP CONFIG_UBOOTPATH To do this, we introduce a CONFIG_USE_ form of each of the above and change include/env_default.h to test for that to be set before setting a value. Further, we don't want to stringify the IP address related values as they are now properly strings via Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aec118eb |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
imx6/imx7: Remove now empty imx6_spl.h and imx7_spl.h There are now no flags being set in these files, so remove them. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
dd11fdc3 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_USB_FLAGS et al to CFG Perform simple renames of: CONFIG_MXC_USB_FLAGS to CFG_MXC_USB_FLAGS CONFIG_MXC_USB_PORT to CFG_MXC_USB_PORT CONFIG_MXC_USB_PORTSC to CFG_MXC_USB_PORTSC Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
4db38665 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_UART_BASE to CFG Perform a simple rename of CONFIG_MXC_UART_BASE to CFG_MXC_UART_BASE Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0613c36a |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_EXTRA_ENV_SETTINGS to CFG Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
54f80dd2 |
|
02-Dec-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_HOSTNAME et al to Kconfig This converts the following to Kconfig: CONFIG_GATEWAYIP CONFIG_HOSTNAME CONFIG_IPADDR CONFIG_NETMASK CONFIG_ROOTPATH CONFIG_SERVERIP CONFIG_UBOOTPATH To do this, we introduce a CONFIG_USE_ form of each of the above and change include/env_default.h to test for that to be set before setting a value. Further, we don't want to stringify the IP address related values as they are now properly strings via Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aec118eb |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
imx6/imx7: Remove now empty imx6_spl.h and imx7_spl.h There are now no flags being set in these files, so remove them. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
dd11fdc3 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_USB_FLAGS et al to CFG Perform simple renames of: CONFIG_MXC_USB_FLAGS to CFG_MXC_USB_FLAGS CONFIG_MXC_USB_PORT to CFG_MXC_USB_PORT CONFIG_MXC_USB_PORTSC to CFG_MXC_USB_PORTSC Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
4db38665 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_UART_BASE to CFG Perform a simple rename of CONFIG_MXC_UART_BASE to CFG_MXC_UART_BASE Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0613c36a |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_EXTRA_ENV_SETTINGS to CFG Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
54f80dd2 |
|
02-Dec-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_HOSTNAME et al to Kconfig This converts the following to Kconfig: CONFIG_GATEWAYIP CONFIG_HOSTNAME CONFIG_IPADDR CONFIG_NETMASK CONFIG_ROOTPATH CONFIG_SERVERIP CONFIG_UBOOTPATH To do this, we introduce a CONFIG_USE_ form of each of the above and change include/env_default.h to test for that to be set before setting a value. Further, we don't want to stringify the IP address related values as they are now properly strings via Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aec118eb |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
imx6/imx7: Remove now empty imx6_spl.h and imx7_spl.h There are now no flags being set in these files, so remove them. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
dd11fdc3 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_USB_FLAGS et al to CFG Perform simple renames of: CONFIG_MXC_USB_FLAGS to CFG_MXC_USB_FLAGS CONFIG_MXC_USB_PORT to CFG_MXC_USB_PORT CONFIG_MXC_USB_PORTSC to CFG_MXC_USB_PORTSC Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
4db38665 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_UART_BASE to CFG Perform a simple rename of CONFIG_MXC_UART_BASE to CFG_MXC_UART_BASE Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0613c36a |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_EXTRA_ENV_SETTINGS to CFG Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
54f80dd2 |
|
02-Dec-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_HOSTNAME et al to Kconfig This converts the following to Kconfig: CONFIG_GATEWAYIP CONFIG_HOSTNAME CONFIG_IPADDR CONFIG_NETMASK CONFIG_ROOTPATH CONFIG_SERVERIP CONFIG_UBOOTPATH To do this, we introduce a CONFIG_USE_ form of each of the above and change include/env_default.h to test for that to be set before setting a value. Further, we don't want to stringify the IP address related values as they are now properly strings via Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aec118eb |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
imx6/imx7: Remove now empty imx6_spl.h and imx7_spl.h There are now no flags being set in these files, so remove them. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
dd11fdc3 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_USB_FLAGS et al to CFG Perform simple renames of: CONFIG_MXC_USB_FLAGS to CFG_MXC_USB_FLAGS CONFIG_MXC_USB_PORT to CFG_MXC_USB_PORT CONFIG_MXC_USB_PORTSC to CFG_MXC_USB_PORTSC Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
4db38665 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_UART_BASE to CFG Perform a simple rename of CONFIG_MXC_UART_BASE to CFG_MXC_UART_BASE Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0613c36a |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_EXTRA_ENV_SETTINGS to CFG Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
54f80dd2 |
|
02-Dec-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_HOSTNAME et al to Kconfig This converts the following to Kconfig: CONFIG_GATEWAYIP CONFIG_HOSTNAME CONFIG_IPADDR CONFIG_NETMASK CONFIG_ROOTPATH CONFIG_SERVERIP CONFIG_UBOOTPATH To do this, we introduce a CONFIG_USE_ form of each of the above and change include/env_default.h to test for that to be set before setting a value. Further, we don't want to stringify the IP address related values as they are now properly strings via Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aec118eb |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
imx6/imx7: Remove now empty imx6_spl.h and imx7_spl.h There are now no flags being set in these files, so remove them. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
dd11fdc3 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_USB_FLAGS et al to CFG Perform simple renames of: CONFIG_MXC_USB_FLAGS to CFG_MXC_USB_FLAGS CONFIG_MXC_USB_PORT to CFG_MXC_USB_PORT CONFIG_MXC_USB_PORTSC to CFG_MXC_USB_PORTSC Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
4db38665 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_UART_BASE to CFG Perform a simple rename of CONFIG_MXC_UART_BASE to CFG_MXC_UART_BASE Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0613c36a |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_EXTRA_ENV_SETTINGS to CFG Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
54f80dd2 |
|
02-Dec-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_HOSTNAME et al to Kconfig This converts the following to Kconfig: CONFIG_GATEWAYIP CONFIG_HOSTNAME CONFIG_IPADDR CONFIG_NETMASK CONFIG_ROOTPATH CONFIG_SERVERIP CONFIG_UBOOTPATH To do this, we introduce a CONFIG_USE_ form of each of the above and change include/env_default.h to test for that to be set before setting a value. Further, we don't want to stringify the IP address related values as they are now properly strings via Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aec118eb |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
imx6/imx7: Remove now empty imx6_spl.h and imx7_spl.h There are now no flags being set in these files, so remove them. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
dd11fdc3 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_USB_FLAGS et al to CFG Perform simple renames of: CONFIG_MXC_USB_FLAGS to CFG_MXC_USB_FLAGS CONFIG_MXC_USB_PORT to CFG_MXC_USB_PORT CONFIG_MXC_USB_PORTSC to CFG_MXC_USB_PORTSC Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
4db38665 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_UART_BASE to CFG Perform a simple rename of CONFIG_MXC_UART_BASE to CFG_MXC_UART_BASE Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0613c36a |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_EXTRA_ENV_SETTINGS to CFG Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
54f80dd2 |
|
02-Dec-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_HOSTNAME et al to Kconfig This converts the following to Kconfig: CONFIG_GATEWAYIP CONFIG_HOSTNAME CONFIG_IPADDR CONFIG_NETMASK CONFIG_ROOTPATH CONFIG_SERVERIP CONFIG_UBOOTPATH To do this, we introduce a CONFIG_USE_ form of each of the above and change include/env_default.h to test for that to be set before setting a value. Further, we don't want to stringify the IP address related values as they are now properly strings via Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aec118eb |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
imx6/imx7: Remove now empty imx6_spl.h and imx7_spl.h There are now no flags being set in these files, so remove them. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
dd11fdc3 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_USB_FLAGS et al to CFG Perform simple renames of: CONFIG_MXC_USB_FLAGS to CFG_MXC_USB_FLAGS CONFIG_MXC_USB_PORT to CFG_MXC_USB_PORT CONFIG_MXC_USB_PORTSC to CFG_MXC_USB_PORTSC Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
4db38665 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_UART_BASE to CFG Perform a simple rename of CONFIG_MXC_UART_BASE to CFG_MXC_UART_BASE Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0613c36a |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_EXTRA_ENV_SETTINGS to CFG Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
54f80dd2 |
|
02-Dec-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_HOSTNAME et al to Kconfig This converts the following to Kconfig: CONFIG_GATEWAYIP CONFIG_HOSTNAME CONFIG_IPADDR CONFIG_NETMASK CONFIG_ROOTPATH CONFIG_SERVERIP CONFIG_UBOOTPATH To do this, we introduce a CONFIG_USE_ form of each of the above and change include/env_default.h to test for that to be set before setting a value. Further, we don't want to stringify the IP address related values as they are now properly strings via Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aec118eb |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
imx6/imx7: Remove now empty imx6_spl.h and imx7_spl.h There are now no flags being set in these files, so remove them. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
dd11fdc3 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_USB_FLAGS et al to CFG Perform simple renames of: CONFIG_MXC_USB_FLAGS to CFG_MXC_USB_FLAGS CONFIG_MXC_USB_PORT to CFG_MXC_USB_PORT CONFIG_MXC_USB_PORTSC to CFG_MXC_USB_PORTSC Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
4db38665 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_UART_BASE to CFG Perform a simple rename of CONFIG_MXC_UART_BASE to CFG_MXC_UART_BASE Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0613c36a |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_EXTRA_ENV_SETTINGS to CFG Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
54f80dd2 |
|
02-Dec-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_HOSTNAME et al to Kconfig This converts the following to Kconfig: CONFIG_GATEWAYIP CONFIG_HOSTNAME CONFIG_IPADDR CONFIG_NETMASK CONFIG_ROOTPATH CONFIG_SERVERIP CONFIG_UBOOTPATH To do this, we introduce a CONFIG_USE_ form of each of the above and change include/env_default.h to test for that to be set before setting a value. Further, we don't want to stringify the IP address related values as they are now properly strings via Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aec118eb |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
imx6/imx7: Remove now empty imx6_spl.h and imx7_spl.h There are now no flags being set in these files, so remove them. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
dd11fdc3 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_USB_FLAGS et al to CFG Perform simple renames of: CONFIG_MXC_USB_FLAGS to CFG_MXC_USB_FLAGS CONFIG_MXC_USB_PORT to CFG_MXC_USB_PORT CONFIG_MXC_USB_PORTSC to CFG_MXC_USB_PORTSC Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
4db38665 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_UART_BASE to CFG Perform a simple rename of CONFIG_MXC_UART_BASE to CFG_MXC_UART_BASE Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0613c36a |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_EXTRA_ENV_SETTINGS to CFG Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
54f80dd2 |
|
02-Dec-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_HOSTNAME et al to Kconfig This converts the following to Kconfig: CONFIG_GATEWAYIP CONFIG_HOSTNAME CONFIG_IPADDR CONFIG_NETMASK CONFIG_ROOTPATH CONFIG_SERVERIP CONFIG_UBOOTPATH To do this, we introduce a CONFIG_USE_ form of each of the above and change include/env_default.h to test for that to be set before setting a value. Further, we don't want to stringify the IP address related values as they are now properly strings via Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aec118eb |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
imx6/imx7: Remove now empty imx6_spl.h and imx7_spl.h There are now no flags being set in these files, so remove them. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
dd11fdc3 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_USB_FLAGS et al to CFG Perform simple renames of: CONFIG_MXC_USB_FLAGS to CFG_MXC_USB_FLAGS CONFIG_MXC_USB_PORT to CFG_MXC_USB_PORT CONFIG_MXC_USB_PORTSC to CFG_MXC_USB_PORTSC Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
4db38665 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_UART_BASE to CFG Perform a simple rename of CONFIG_MXC_UART_BASE to CFG_MXC_UART_BASE Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0613c36a |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_EXTRA_ENV_SETTINGS to CFG Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
54f80dd2 |
|
02-Dec-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_HOSTNAME et al to Kconfig This converts the following to Kconfig: CONFIG_GATEWAYIP CONFIG_HOSTNAME CONFIG_IPADDR CONFIG_NETMASK CONFIG_ROOTPATH CONFIG_SERVERIP CONFIG_UBOOTPATH To do this, we introduce a CONFIG_USE_ form of each of the above and change include/env_default.h to test for that to be set before setting a value. Further, we don't want to stringify the IP address related values as they are now properly strings via Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aec118eb |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
imx6/imx7: Remove now empty imx6_spl.h and imx7_spl.h There are now no flags being set in these files, so remove them. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
dd11fdc3 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_USB_FLAGS et al to CFG Perform simple renames of: CONFIG_MXC_USB_FLAGS to CFG_MXC_USB_FLAGS CONFIG_MXC_USB_PORT to CFG_MXC_USB_PORT CONFIG_MXC_USB_PORTSC to CFG_MXC_USB_PORTSC Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
4db38665 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_UART_BASE to CFG Perform a simple rename of CONFIG_MXC_UART_BASE to CFG_MXC_UART_BASE Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0613c36a |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_EXTRA_ENV_SETTINGS to CFG Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
54f80dd2 |
|
02-Dec-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_HOSTNAME et al to Kconfig This converts the following to Kconfig: CONFIG_GATEWAYIP CONFIG_HOSTNAME CONFIG_IPADDR CONFIG_NETMASK CONFIG_ROOTPATH CONFIG_SERVERIP CONFIG_UBOOTPATH To do this, we introduce a CONFIG_USE_ form of each of the above and change include/env_default.h to test for that to be set before setting a value. Further, we don't want to stringify the IP address related values as they are now properly strings via Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aec118eb |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
imx6/imx7: Remove now empty imx6_spl.h and imx7_spl.h There are now no flags being set in these files, so remove them. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
dd11fdc3 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_USB_FLAGS et al to CFG Perform simple renames of: CONFIG_MXC_USB_FLAGS to CFG_MXC_USB_FLAGS CONFIG_MXC_USB_PORT to CFG_MXC_USB_PORT CONFIG_MXC_USB_PORTSC to CFG_MXC_USB_PORTSC Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
4db38665 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_UART_BASE to CFG Perform a simple rename of CONFIG_MXC_UART_BASE to CFG_MXC_UART_BASE Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0613c36a |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_EXTRA_ENV_SETTINGS to CFG Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
54f80dd2 |
|
02-Dec-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_HOSTNAME et al to Kconfig This converts the following to Kconfig: CONFIG_GATEWAYIP CONFIG_HOSTNAME CONFIG_IPADDR CONFIG_NETMASK CONFIG_ROOTPATH CONFIG_SERVERIP CONFIG_UBOOTPATH To do this, we introduce a CONFIG_USE_ form of each of the above and change include/env_default.h to test for that to be set before setting a value. Further, we don't want to stringify the IP address related values as they are now properly strings via Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aec118eb |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
imx6/imx7: Remove now empty imx6_spl.h and imx7_spl.h There are now no flags being set in these files, so remove them. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
dd11fdc3 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_USB_FLAGS et al to CFG Perform simple renames of: CONFIG_MXC_USB_FLAGS to CFG_MXC_USB_FLAGS CONFIG_MXC_USB_PORT to CFG_MXC_USB_PORT CONFIG_MXC_USB_PORTSC to CFG_MXC_USB_PORTSC Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
4db38665 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_UART_BASE to CFG Perform a simple rename of CONFIG_MXC_UART_BASE to CFG_MXC_UART_BASE Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0613c36a |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_EXTRA_ENV_SETTINGS to CFG Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
54f80dd2 |
|
02-Dec-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_HOSTNAME et al to Kconfig This converts the following to Kconfig: CONFIG_GATEWAYIP CONFIG_HOSTNAME CONFIG_IPADDR CONFIG_NETMASK CONFIG_ROOTPATH CONFIG_SERVERIP CONFIG_UBOOTPATH To do this, we introduce a CONFIG_USE_ form of each of the above and change include/env_default.h to test for that to be set before setting a value. Further, we don't want to stringify the IP address related values as they are now properly strings via Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aec118eb |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
imx6/imx7: Remove now empty imx6_spl.h and imx7_spl.h There are now no flags being set in these files, so remove them. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
dd11fdc3 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_USB_FLAGS et al to CFG Perform simple renames of: CONFIG_MXC_USB_FLAGS to CFG_MXC_USB_FLAGS CONFIG_MXC_USB_PORT to CFG_MXC_USB_PORT CONFIG_MXC_USB_PORTSC to CFG_MXC_USB_PORTSC Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
4db38665 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_UART_BASE to CFG Perform a simple rename of CONFIG_MXC_UART_BASE to CFG_MXC_UART_BASE Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0613c36a |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_EXTRA_ENV_SETTINGS to CFG Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
54f80dd2 |
|
02-Dec-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_HOSTNAME et al to Kconfig This converts the following to Kconfig: CONFIG_GATEWAYIP CONFIG_HOSTNAME CONFIG_IPADDR CONFIG_NETMASK CONFIG_ROOTPATH CONFIG_SERVERIP CONFIG_UBOOTPATH To do this, we introduce a CONFIG_USE_ form of each of the above and change include/env_default.h to test for that to be set before setting a value. Further, we don't want to stringify the IP address related values as they are now properly strings via Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aec118eb |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
imx6/imx7: Remove now empty imx6_spl.h and imx7_spl.h There are now no flags being set in these files, so remove them. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
dd11fdc3 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_USB_FLAGS et al to CFG Perform simple renames of: CONFIG_MXC_USB_FLAGS to CFG_MXC_USB_FLAGS CONFIG_MXC_USB_PORT to CFG_MXC_USB_PORT CONFIG_MXC_USB_PORTSC to CFG_MXC_USB_PORTSC Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
4db38665 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_UART_BASE to CFG Perform a simple rename of CONFIG_MXC_UART_BASE to CFG_MXC_UART_BASE Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0613c36a |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_EXTRA_ENV_SETTINGS to CFG Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
54f80dd2 |
|
02-Dec-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_HOSTNAME et al to Kconfig This converts the following to Kconfig: CONFIG_GATEWAYIP CONFIG_HOSTNAME CONFIG_IPADDR CONFIG_NETMASK CONFIG_ROOTPATH CONFIG_SERVERIP CONFIG_UBOOTPATH To do this, we introduce a CONFIG_USE_ form of each of the above and change include/env_default.h to test for that to be set before setting a value. Further, we don't want to stringify the IP address related values as they are now properly strings via Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aec118eb |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
imx6/imx7: Remove now empty imx6_spl.h and imx7_spl.h There are now no flags being set in these files, so remove them. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
dd11fdc3 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_USB_FLAGS et al to CFG Perform simple renames of: CONFIG_MXC_USB_FLAGS to CFG_MXC_USB_FLAGS CONFIG_MXC_USB_PORT to CFG_MXC_USB_PORT CONFIG_MXC_USB_PORTSC to CFG_MXC_USB_PORTSC Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
4db38665 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_UART_BASE to CFG Perform a simple rename of CONFIG_MXC_UART_BASE to CFG_MXC_UART_BASE Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0613c36a |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_EXTRA_ENV_SETTINGS to CFG Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
54f80dd2 |
|
02-Dec-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_HOSTNAME et al to Kconfig This converts the following to Kconfig: CONFIG_GATEWAYIP CONFIG_HOSTNAME CONFIG_IPADDR CONFIG_NETMASK CONFIG_ROOTPATH CONFIG_SERVERIP CONFIG_UBOOTPATH To do this, we introduce a CONFIG_USE_ form of each of the above and change include/env_default.h to test for that to be set before setting a value. Further, we don't want to stringify the IP address related values as they are now properly strings via Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aec118eb |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
imx6/imx7: Remove now empty imx6_spl.h and imx7_spl.h There are now no flags being set in these files, so remove them. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
dd11fdc3 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_USB_FLAGS et al to CFG Perform simple renames of: CONFIG_MXC_USB_FLAGS to CFG_MXC_USB_FLAGS CONFIG_MXC_USB_PORT to CFG_MXC_USB_PORT CONFIG_MXC_USB_PORTSC to CFG_MXC_USB_PORTSC Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
4db38665 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_UART_BASE to CFG Perform a simple rename of CONFIG_MXC_UART_BASE to CFG_MXC_UART_BASE Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0613c36a |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_EXTRA_ENV_SETTINGS to CFG Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
54f80dd2 |
|
02-Dec-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_HOSTNAME et al to Kconfig This converts the following to Kconfig: CONFIG_GATEWAYIP CONFIG_HOSTNAME CONFIG_IPADDR CONFIG_NETMASK CONFIG_ROOTPATH CONFIG_SERVERIP CONFIG_UBOOTPATH To do this, we introduce a CONFIG_USE_ form of each of the above and change include/env_default.h to test for that to be set before setting a value. Further, we don't want to stringify the IP address related values as they are now properly strings via Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aec118eb |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
imx6/imx7: Remove now empty imx6_spl.h and imx7_spl.h There are now no flags being set in these files, so remove them. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
dd11fdc3 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_USB_FLAGS et al to CFG Perform simple renames of: CONFIG_MXC_USB_FLAGS to CFG_MXC_USB_FLAGS CONFIG_MXC_USB_PORT to CFG_MXC_USB_PORT CONFIG_MXC_USB_PORTSC to CFG_MXC_USB_PORTSC Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
4db38665 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_UART_BASE to CFG Perform a simple rename of CONFIG_MXC_UART_BASE to CFG_MXC_UART_BASE Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0613c36a |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_EXTRA_ENV_SETTINGS to CFG Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
54f80dd2 |
|
02-Dec-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_HOSTNAME et al to Kconfig This converts the following to Kconfig: CONFIG_GATEWAYIP CONFIG_HOSTNAME CONFIG_IPADDR CONFIG_NETMASK CONFIG_ROOTPATH CONFIG_SERVERIP CONFIG_UBOOTPATH To do this, we introduce a CONFIG_USE_ form of each of the above and change include/env_default.h to test for that to be set before setting a value. Further, we don't want to stringify the IP address related values as they are now properly strings via Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aec118eb |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
imx6/imx7: Remove now empty imx6_spl.h and imx7_spl.h There are now no flags being set in these files, so remove them. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
dd11fdc3 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_USB_FLAGS et al to CFG Perform simple renames of: CONFIG_MXC_USB_FLAGS to CFG_MXC_USB_FLAGS CONFIG_MXC_USB_PORT to CFG_MXC_USB_PORT CONFIG_MXC_USB_PORTSC to CFG_MXC_USB_PORTSC Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
4db38665 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_UART_BASE to CFG Perform a simple rename of CONFIG_MXC_UART_BASE to CFG_MXC_UART_BASE Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0613c36a |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_EXTRA_ENV_SETTINGS to CFG Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
54f80dd2 |
|
02-Dec-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_HOSTNAME et al to Kconfig This converts the following to Kconfig: CONFIG_GATEWAYIP CONFIG_HOSTNAME CONFIG_IPADDR CONFIG_NETMASK CONFIG_ROOTPATH CONFIG_SERVERIP CONFIG_UBOOTPATH To do this, we introduce a CONFIG_USE_ form of each of the above and change include/env_default.h to test for that to be set before setting a value. Further, we don't want to stringify the IP address related values as they are now properly strings via Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aec118eb |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
imx6/imx7: Remove now empty imx6_spl.h and imx7_spl.h There are now no flags being set in these files, so remove them. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
dd11fdc3 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_USB_FLAGS et al to CFG Perform simple renames of: CONFIG_MXC_USB_FLAGS to CFG_MXC_USB_FLAGS CONFIG_MXC_USB_PORT to CFG_MXC_USB_PORT CONFIG_MXC_USB_PORTSC to CFG_MXC_USB_PORTSC Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
4db38665 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_UART_BASE to CFG Perform a simple rename of CONFIG_MXC_UART_BASE to CFG_MXC_UART_BASE Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0613c36a |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_EXTRA_ENV_SETTINGS to CFG Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
54f80dd2 |
|
02-Dec-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_HOSTNAME et al to Kconfig This converts the following to Kconfig: CONFIG_GATEWAYIP CONFIG_HOSTNAME CONFIG_IPADDR CONFIG_NETMASK CONFIG_ROOTPATH CONFIG_SERVERIP CONFIG_UBOOTPATH To do this, we introduce a CONFIG_USE_ form of each of the above and change include/env_default.h to test for that to be set before setting a value. Further, we don't want to stringify the IP address related values as they are now properly strings via Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aec118eb |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
imx6/imx7: Remove now empty imx6_spl.h and imx7_spl.h There are now no flags being set in these files, so remove them. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
dd11fdc3 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_USB_FLAGS et al to CFG Perform simple renames of: CONFIG_MXC_USB_FLAGS to CFG_MXC_USB_FLAGS CONFIG_MXC_USB_PORT to CFG_MXC_USB_PORT CONFIG_MXC_USB_PORTSC to CFG_MXC_USB_PORTSC Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
4db38665 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_UART_BASE to CFG Perform a simple rename of CONFIG_MXC_UART_BASE to CFG_MXC_UART_BASE Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0613c36a |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_EXTRA_ENV_SETTINGS to CFG Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
54f80dd2 |
|
02-Dec-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_HOSTNAME et al to Kconfig This converts the following to Kconfig: CONFIG_GATEWAYIP CONFIG_HOSTNAME CONFIG_IPADDR CONFIG_NETMASK CONFIG_ROOTPATH CONFIG_SERVERIP CONFIG_UBOOTPATH To do this, we introduce a CONFIG_USE_ form of each of the above and change include/env_default.h to test for that to be set before setting a value. Further, we don't want to stringify the IP address related values as they are now properly strings via Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aec118eb |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
imx6/imx7: Remove now empty imx6_spl.h and imx7_spl.h There are now no flags being set in these files, so remove them. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
dd11fdc3 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_USB_FLAGS et al to CFG Perform simple renames of: CONFIG_MXC_USB_FLAGS to CFG_MXC_USB_FLAGS CONFIG_MXC_USB_PORT to CFG_MXC_USB_PORT CONFIG_MXC_USB_PORTSC to CFG_MXC_USB_PORTSC Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
4db38665 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_UART_BASE to CFG Perform a simple rename of CONFIG_MXC_UART_BASE to CFG_MXC_UART_BASE Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0613c36a |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_EXTRA_ENV_SETTINGS to CFG Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
54f80dd2 |
|
02-Dec-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_HOSTNAME et al to Kconfig This converts the following to Kconfig: CONFIG_GATEWAYIP CONFIG_HOSTNAME CONFIG_IPADDR CONFIG_NETMASK CONFIG_ROOTPATH CONFIG_SERVERIP CONFIG_UBOOTPATH To do this, we introduce a CONFIG_USE_ form of each of the above and change include/env_default.h to test for that to be set before setting a value. Further, we don't want to stringify the IP address related values as they are now properly strings via Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aec118eb |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
imx6/imx7: Remove now empty imx6_spl.h and imx7_spl.h There are now no flags being set in these files, so remove them. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
dd11fdc3 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_USB_FLAGS et al to CFG Perform simple renames of: CONFIG_MXC_USB_FLAGS to CFG_MXC_USB_FLAGS CONFIG_MXC_USB_PORT to CFG_MXC_USB_PORT CONFIG_MXC_USB_PORTSC to CFG_MXC_USB_PORTSC Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
4db38665 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_UART_BASE to CFG Perform a simple rename of CONFIG_MXC_UART_BASE to CFG_MXC_UART_BASE Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0613c36a |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_EXTRA_ENV_SETTINGS to CFG Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
54f80dd2 |
|
02-Dec-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_HOSTNAME et al to Kconfig This converts the following to Kconfig: CONFIG_GATEWAYIP CONFIG_HOSTNAME CONFIG_IPADDR CONFIG_NETMASK CONFIG_ROOTPATH CONFIG_SERVERIP CONFIG_UBOOTPATH To do this, we introduce a CONFIG_USE_ form of each of the above and change include/env_default.h to test for that to be set before setting a value. Further, we don't want to stringify the IP address related values as they are now properly strings via Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aec118eb |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
imx6/imx7: Remove now empty imx6_spl.h and imx7_spl.h There are now no flags being set in these files, so remove them. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
dd11fdc3 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_USB_FLAGS et al to CFG Perform simple renames of: CONFIG_MXC_USB_FLAGS to CFG_MXC_USB_FLAGS CONFIG_MXC_USB_PORT to CFG_MXC_USB_PORT CONFIG_MXC_USB_PORTSC to CFG_MXC_USB_PORTSC Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
4db38665 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_UART_BASE to CFG Perform a simple rename of CONFIG_MXC_UART_BASE to CFG_MXC_UART_BASE Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0613c36a |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_EXTRA_ENV_SETTINGS to CFG Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
54f80dd2 |
|
02-Dec-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_HOSTNAME et al to Kconfig This converts the following to Kconfig: CONFIG_GATEWAYIP CONFIG_HOSTNAME CONFIG_IPADDR CONFIG_NETMASK CONFIG_ROOTPATH CONFIG_SERVERIP CONFIG_UBOOTPATH To do this, we introduce a CONFIG_USE_ form of each of the above and change include/env_default.h to test for that to be set before setting a value. Further, we don't want to stringify the IP address related values as they are now properly strings via Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aec118eb |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
imx6/imx7: Remove now empty imx6_spl.h and imx7_spl.h There are now no flags being set in these files, so remove them. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
dd11fdc3 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_USB_FLAGS et al to CFG Perform simple renames of: CONFIG_MXC_USB_FLAGS to CFG_MXC_USB_FLAGS CONFIG_MXC_USB_PORT to CFG_MXC_USB_PORT CONFIG_MXC_USB_PORTSC to CFG_MXC_USB_PORTSC Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
4db38665 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_UART_BASE to CFG Perform a simple rename of CONFIG_MXC_UART_BASE to CFG_MXC_UART_BASE Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0613c36a |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_EXTRA_ENV_SETTINGS to CFG Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
54f80dd2 |
|
02-Dec-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_HOSTNAME et al to Kconfig This converts the following to Kconfig: CONFIG_GATEWAYIP CONFIG_HOSTNAME CONFIG_IPADDR CONFIG_NETMASK CONFIG_ROOTPATH CONFIG_SERVERIP CONFIG_UBOOTPATH To do this, we introduce a CONFIG_USE_ form of each of the above and change include/env_default.h to test for that to be set before setting a value. Further, we don't want to stringify the IP address related values as they are now properly strings via Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aec118eb |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
imx6/imx7: Remove now empty imx6_spl.h and imx7_spl.h There are now no flags being set in these files, so remove them. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
dd11fdc3 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_USB_FLAGS et al to CFG Perform simple renames of: CONFIG_MXC_USB_FLAGS to CFG_MXC_USB_FLAGS CONFIG_MXC_USB_PORT to CFG_MXC_USB_PORT CONFIG_MXC_USB_PORTSC to CFG_MXC_USB_PORTSC Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
4db38665 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_UART_BASE to CFG Perform a simple rename of CONFIG_MXC_UART_BASE to CFG_MXC_UART_BASE Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0613c36a |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_EXTRA_ENV_SETTINGS to CFG Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
54f80dd2 |
|
02-Dec-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_HOSTNAME et al to Kconfig This converts the following to Kconfig: CONFIG_GATEWAYIP CONFIG_HOSTNAME CONFIG_IPADDR CONFIG_NETMASK CONFIG_ROOTPATH CONFIG_SERVERIP CONFIG_UBOOTPATH To do this, we introduce a CONFIG_USE_ form of each of the above and change include/env_default.h to test for that to be set before setting a value. Further, we don't want to stringify the IP address related values as they are now properly strings via Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aec118eb |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
imx6/imx7: Remove now empty imx6_spl.h and imx7_spl.h There are now no flags being set in these files, so remove them. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
dd11fdc3 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_USB_FLAGS et al to CFG Perform simple renames of: CONFIG_MXC_USB_FLAGS to CFG_MXC_USB_FLAGS CONFIG_MXC_USB_PORT to CFG_MXC_USB_PORT CONFIG_MXC_USB_PORTSC to CFG_MXC_USB_PORTSC Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
4db38665 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_UART_BASE to CFG Perform a simple rename of CONFIG_MXC_UART_BASE to CFG_MXC_UART_BASE Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0613c36a |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_EXTRA_ENV_SETTINGS to CFG Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
54f80dd2 |
|
02-Dec-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_HOSTNAME et al to Kconfig This converts the following to Kconfig: CONFIG_GATEWAYIP CONFIG_HOSTNAME CONFIG_IPADDR CONFIG_NETMASK CONFIG_ROOTPATH CONFIG_SERVERIP CONFIG_UBOOTPATH To do this, we introduce a CONFIG_USE_ form of each of the above and change include/env_default.h to test for that to be set before setting a value. Further, we don't want to stringify the IP address related values as they are now properly strings via Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aec118eb |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
imx6/imx7: Remove now empty imx6_spl.h and imx7_spl.h There are now no flags being set in these files, so remove them. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
dd11fdc3 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_USB_FLAGS et al to CFG Perform simple renames of: CONFIG_MXC_USB_FLAGS to CFG_MXC_USB_FLAGS CONFIG_MXC_USB_PORT to CFG_MXC_USB_PORT CONFIG_MXC_USB_PORTSC to CFG_MXC_USB_PORTSC Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
4db38665 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_UART_BASE to CFG Perform a simple rename of CONFIG_MXC_UART_BASE to CFG_MXC_UART_BASE Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0613c36a |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_EXTRA_ENV_SETTINGS to CFG Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
54f80dd2 |
|
02-Dec-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_HOSTNAME et al to Kconfig This converts the following to Kconfig: CONFIG_GATEWAYIP CONFIG_HOSTNAME CONFIG_IPADDR CONFIG_NETMASK CONFIG_ROOTPATH CONFIG_SERVERIP CONFIG_UBOOTPATH To do this, we introduce a CONFIG_USE_ form of each of the above and change include/env_default.h to test for that to be set before setting a value. Further, we don't want to stringify the IP address related values as they are now properly strings via Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aec118eb |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
imx6/imx7: Remove now empty imx6_spl.h and imx7_spl.h There are now no flags being set in these files, so remove them. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
dd11fdc3 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_USB_FLAGS et al to CFG Perform simple renames of: CONFIG_MXC_USB_FLAGS to CFG_MXC_USB_FLAGS CONFIG_MXC_USB_PORT to CFG_MXC_USB_PORT CONFIG_MXC_USB_PORTSC to CFG_MXC_USB_PORTSC Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
4db38665 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_UART_BASE to CFG Perform a simple rename of CONFIG_MXC_UART_BASE to CFG_MXC_UART_BASE Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0613c36a |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_EXTRA_ENV_SETTINGS to CFG Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
54f80dd2 |
|
02-Dec-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_HOSTNAME et al to Kconfig This converts the following to Kconfig: CONFIG_GATEWAYIP CONFIG_HOSTNAME CONFIG_IPADDR CONFIG_NETMASK CONFIG_ROOTPATH CONFIG_SERVERIP CONFIG_UBOOTPATH To do this, we introduce a CONFIG_USE_ form of each of the above and change include/env_default.h to test for that to be set before setting a value. Further, we don't want to stringify the IP address related values as they are now properly strings via Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aec118eb |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
imx6/imx7: Remove now empty imx6_spl.h and imx7_spl.h There are now no flags being set in these files, so remove them. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
dd11fdc3 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_USB_FLAGS et al to CFG Perform simple renames of: CONFIG_MXC_USB_FLAGS to CFG_MXC_USB_FLAGS CONFIG_MXC_USB_PORT to CFG_MXC_USB_PORT CONFIG_MXC_USB_PORTSC to CFG_MXC_USB_PORTSC Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
4db38665 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_UART_BASE to CFG Perform a simple rename of CONFIG_MXC_UART_BASE to CFG_MXC_UART_BASE Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0613c36a |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_EXTRA_ENV_SETTINGS to CFG Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
54f80dd2 |
|
02-Dec-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_HOSTNAME et al to Kconfig This converts the following to Kconfig: CONFIG_GATEWAYIP CONFIG_HOSTNAME CONFIG_IPADDR CONFIG_NETMASK CONFIG_ROOTPATH CONFIG_SERVERIP CONFIG_UBOOTPATH To do this, we introduce a CONFIG_USE_ form of each of the above and change include/env_default.h to test for that to be set before setting a value. Further, we don't want to stringify the IP address related values as they are now properly strings via Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aec118eb |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
imx6/imx7: Remove now empty imx6_spl.h and imx7_spl.h There are now no flags being set in these files, so remove them. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
dd11fdc3 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_USB_FLAGS et al to CFG Perform simple renames of: CONFIG_MXC_USB_FLAGS to CFG_MXC_USB_FLAGS CONFIG_MXC_USB_PORT to CFG_MXC_USB_PORT CONFIG_MXC_USB_PORTSC to CFG_MXC_USB_PORTSC Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
4db38665 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_UART_BASE to CFG Perform a simple rename of CONFIG_MXC_UART_BASE to CFG_MXC_UART_BASE Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0613c36a |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_EXTRA_ENV_SETTINGS to CFG Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
54f80dd2 |
|
02-Dec-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_HOSTNAME et al to Kconfig This converts the following to Kconfig: CONFIG_GATEWAYIP CONFIG_HOSTNAME CONFIG_IPADDR CONFIG_NETMASK CONFIG_ROOTPATH CONFIG_SERVERIP CONFIG_UBOOTPATH To do this, we introduce a CONFIG_USE_ form of each of the above and change include/env_default.h to test for that to be set before setting a value. Further, we don't want to stringify the IP address related values as they are now properly strings via Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aec118eb |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
imx6/imx7: Remove now empty imx6_spl.h and imx7_spl.h There are now no flags being set in these files, so remove them. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
dd11fdc3 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_USB_FLAGS et al to CFG Perform simple renames of: CONFIG_MXC_USB_FLAGS to CFG_MXC_USB_FLAGS CONFIG_MXC_USB_PORT to CFG_MXC_USB_PORT CONFIG_MXC_USB_PORTSC to CFG_MXC_USB_PORTSC Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
4db38665 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_UART_BASE to CFG Perform a simple rename of CONFIG_MXC_UART_BASE to CFG_MXC_UART_BASE Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0613c36a |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_EXTRA_ENV_SETTINGS to CFG Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
54f80dd2 |
|
02-Dec-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_HOSTNAME et al to Kconfig This converts the following to Kconfig: CONFIG_GATEWAYIP CONFIG_HOSTNAME CONFIG_IPADDR CONFIG_NETMASK CONFIG_ROOTPATH CONFIG_SERVERIP CONFIG_UBOOTPATH To do this, we introduce a CONFIG_USE_ form of each of the above and change include/env_default.h to test for that to be set before setting a value. Further, we don't want to stringify the IP address related values as they are now properly strings via Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aec118eb |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
imx6/imx7: Remove now empty imx6_spl.h and imx7_spl.h There are now no flags being set in these files, so remove them. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
dd11fdc3 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_USB_FLAGS et al to CFG Perform simple renames of: CONFIG_MXC_USB_FLAGS to CFG_MXC_USB_FLAGS CONFIG_MXC_USB_PORT to CFG_MXC_USB_PORT CONFIG_MXC_USB_PORTSC to CFG_MXC_USB_PORTSC Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
4db38665 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_UART_BASE to CFG Perform a simple rename of CONFIG_MXC_UART_BASE to CFG_MXC_UART_BASE Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0613c36a |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_EXTRA_ENV_SETTINGS to CFG Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
54f80dd2 |
|
02-Dec-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_HOSTNAME et al to Kconfig This converts the following to Kconfig: CONFIG_GATEWAYIP CONFIG_HOSTNAME CONFIG_IPADDR CONFIG_NETMASK CONFIG_ROOTPATH CONFIG_SERVERIP CONFIG_UBOOTPATH To do this, we introduce a CONFIG_USE_ form of each of the above and change include/env_default.h to test for that to be set before setting a value. Further, we don't want to stringify the IP address related values as they are now properly strings via Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aec118eb |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
imx6/imx7: Remove now empty imx6_spl.h and imx7_spl.h There are now no flags being set in these files, so remove them. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
dd11fdc3 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_USB_FLAGS et al to CFG Perform simple renames of: CONFIG_MXC_USB_FLAGS to CFG_MXC_USB_FLAGS CONFIG_MXC_USB_PORT to CFG_MXC_USB_PORT CONFIG_MXC_USB_PORTSC to CFG_MXC_USB_PORTSC Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
4db38665 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_UART_BASE to CFG Perform a simple rename of CONFIG_MXC_UART_BASE to CFG_MXC_UART_BASE Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0613c36a |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_EXTRA_ENV_SETTINGS to CFG Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
54f80dd2 |
|
02-Dec-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_HOSTNAME et al to Kconfig This converts the following to Kconfig: CONFIG_GATEWAYIP CONFIG_HOSTNAME CONFIG_IPADDR CONFIG_NETMASK CONFIG_ROOTPATH CONFIG_SERVERIP CONFIG_UBOOTPATH To do this, we introduce a CONFIG_USE_ form of each of the above and change include/env_default.h to test for that to be set before setting a value. Further, we don't want to stringify the IP address related values as they are now properly strings via Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aec118eb |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
imx6/imx7: Remove now empty imx6_spl.h and imx7_spl.h There are now no flags being set in these files, so remove them. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
dd11fdc3 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_USB_FLAGS et al to CFG Perform simple renames of: CONFIG_MXC_USB_FLAGS to CFG_MXC_USB_FLAGS CONFIG_MXC_USB_PORT to CFG_MXC_USB_PORT CONFIG_MXC_USB_PORTSC to CFG_MXC_USB_PORTSC Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
4db38665 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_UART_BASE to CFG Perform a simple rename of CONFIG_MXC_UART_BASE to CFG_MXC_UART_BASE Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0613c36a |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_EXTRA_ENV_SETTINGS to CFG Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
54f80dd2 |
|
02-Dec-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_HOSTNAME et al to Kconfig This converts the following to Kconfig: CONFIG_GATEWAYIP CONFIG_HOSTNAME CONFIG_IPADDR CONFIG_NETMASK CONFIG_ROOTPATH CONFIG_SERVERIP CONFIG_UBOOTPATH To do this, we introduce a CONFIG_USE_ form of each of the above and change include/env_default.h to test for that to be set before setting a value. Further, we don't want to stringify the IP address related values as they are now properly strings via Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aec118eb |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
imx6/imx7: Remove now empty imx6_spl.h and imx7_spl.h There are now no flags being set in these files, so remove them. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
dd11fdc3 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_USB_FLAGS et al to CFG Perform simple renames of: CONFIG_MXC_USB_FLAGS to CFG_MXC_USB_FLAGS CONFIG_MXC_USB_PORT to CFG_MXC_USB_PORT CONFIG_MXC_USB_PORTSC to CFG_MXC_USB_PORTSC Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
4db38665 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_UART_BASE to CFG Perform a simple rename of CONFIG_MXC_UART_BASE to CFG_MXC_UART_BASE Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0613c36a |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_EXTRA_ENV_SETTINGS to CFG Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
54f80dd2 |
|
02-Dec-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_HOSTNAME et al to Kconfig This converts the following to Kconfig: CONFIG_GATEWAYIP CONFIG_HOSTNAME CONFIG_IPADDR CONFIG_NETMASK CONFIG_ROOTPATH CONFIG_SERVERIP CONFIG_UBOOTPATH To do this, we introduce a CONFIG_USE_ form of each of the above and change include/env_default.h to test for that to be set before setting a value. Further, we don't want to stringify the IP address related values as they are now properly strings via Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aec118eb |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
imx6/imx7: Remove now empty imx6_spl.h and imx7_spl.h There are now no flags being set in these files, so remove them. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
dd11fdc3 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_USB_FLAGS et al to CFG Perform simple renames of: CONFIG_MXC_USB_FLAGS to CFG_MXC_USB_FLAGS CONFIG_MXC_USB_PORT to CFG_MXC_USB_PORT CONFIG_MXC_USB_PORTSC to CFG_MXC_USB_PORTSC Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
4db38665 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_UART_BASE to CFG Perform a simple rename of CONFIG_MXC_UART_BASE to CFG_MXC_UART_BASE Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0613c36a |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_EXTRA_ENV_SETTINGS to CFG Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
54f80dd2 |
|
02-Dec-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_HOSTNAME et al to Kconfig This converts the following to Kconfig: CONFIG_GATEWAYIP CONFIG_HOSTNAME CONFIG_IPADDR CONFIG_NETMASK CONFIG_ROOTPATH CONFIG_SERVERIP CONFIG_UBOOTPATH To do this, we introduce a CONFIG_USE_ form of each of the above and change include/env_default.h to test for that to be set before setting a value. Further, we don't want to stringify the IP address related values as they are now properly strings via Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aec118eb |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
imx6/imx7: Remove now empty imx6_spl.h and imx7_spl.h There are now no flags being set in these files, so remove them. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
dd11fdc3 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_USB_FLAGS et al to CFG Perform simple renames of: CONFIG_MXC_USB_FLAGS to CFG_MXC_USB_FLAGS CONFIG_MXC_USB_PORT to CFG_MXC_USB_PORT CONFIG_MXC_USB_PORTSC to CFG_MXC_USB_PORTSC Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
4db38665 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_UART_BASE to CFG Perform a simple rename of CONFIG_MXC_UART_BASE to CFG_MXC_UART_BASE Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0613c36a |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_EXTRA_ENV_SETTINGS to CFG Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
54f80dd2 |
|
02-Dec-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_HOSTNAME et al to Kconfig This converts the following to Kconfig: CONFIG_GATEWAYIP CONFIG_HOSTNAME CONFIG_IPADDR CONFIG_NETMASK CONFIG_ROOTPATH CONFIG_SERVERIP CONFIG_UBOOTPATH To do this, we introduce a CONFIG_USE_ form of each of the above and change include/env_default.h to test for that to be set before setting a value. Further, we don't want to stringify the IP address related values as they are now properly strings via Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aec118eb |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
imx6/imx7: Remove now empty imx6_spl.h and imx7_spl.h There are now no flags being set in these files, so remove them. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
dd11fdc3 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_USB_FLAGS et al to CFG Perform simple renames of: CONFIG_MXC_USB_FLAGS to CFG_MXC_USB_FLAGS CONFIG_MXC_USB_PORT to CFG_MXC_USB_PORT CONFIG_MXC_USB_PORTSC to CFG_MXC_USB_PORTSC Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
4db38665 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_UART_BASE to CFG Perform a simple rename of CONFIG_MXC_UART_BASE to CFG_MXC_UART_BASE Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0613c36a |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_EXTRA_ENV_SETTINGS to CFG Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
54f80dd2 |
|
02-Dec-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_HOSTNAME et al to Kconfig This converts the following to Kconfig: CONFIG_GATEWAYIP CONFIG_HOSTNAME CONFIG_IPADDR CONFIG_NETMASK CONFIG_ROOTPATH CONFIG_SERVERIP CONFIG_UBOOTPATH To do this, we introduce a CONFIG_USE_ form of each of the above and change include/env_default.h to test for that to be set before setting a value. Further, we don't want to stringify the IP address related values as they are now properly strings via Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aec118eb |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
imx6/imx7: Remove now empty imx6_spl.h and imx7_spl.h There are now no flags being set in these files, so remove them. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
dd11fdc3 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_USB_FLAGS et al to CFG Perform simple renames of: CONFIG_MXC_USB_FLAGS to CFG_MXC_USB_FLAGS CONFIG_MXC_USB_PORT to CFG_MXC_USB_PORT CONFIG_MXC_USB_PORTSC to CFG_MXC_USB_PORTSC Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
4db38665 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_UART_BASE to CFG Perform a simple rename of CONFIG_MXC_UART_BASE to CFG_MXC_UART_BASE Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0613c36a |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_EXTRA_ENV_SETTINGS to CFG Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
54f80dd2 |
|
02-Dec-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_HOSTNAME et al to Kconfig This converts the following to Kconfig: CONFIG_GATEWAYIP CONFIG_HOSTNAME CONFIG_IPADDR CONFIG_NETMASK CONFIG_ROOTPATH CONFIG_SERVERIP CONFIG_UBOOTPATH To do this, we introduce a CONFIG_USE_ form of each of the above and change include/env_default.h to test for that to be set before setting a value. Further, we don't want to stringify the IP address related values as they are now properly strings via Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aec118eb |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
imx6/imx7: Remove now empty imx6_spl.h and imx7_spl.h There are now no flags being set in these files, so remove them. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
dd11fdc3 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_USB_FLAGS et al to CFG Perform simple renames of: CONFIG_MXC_USB_FLAGS to CFG_MXC_USB_FLAGS CONFIG_MXC_USB_PORT to CFG_MXC_USB_PORT CONFIG_MXC_USB_PORTSC to CFG_MXC_USB_PORTSC Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
4db38665 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_UART_BASE to CFG Perform a simple rename of CONFIG_MXC_UART_BASE to CFG_MXC_UART_BASE Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0613c36a |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_EXTRA_ENV_SETTINGS to CFG Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
54f80dd2 |
|
02-Dec-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_HOSTNAME et al to Kconfig This converts the following to Kconfig: CONFIG_GATEWAYIP CONFIG_HOSTNAME CONFIG_IPADDR CONFIG_NETMASK CONFIG_ROOTPATH CONFIG_SERVERIP CONFIG_UBOOTPATH To do this, we introduce a CONFIG_USE_ form of each of the above and change include/env_default.h to test for that to be set before setting a value. Further, we don't want to stringify the IP address related values as they are now properly strings via Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aec118eb |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
imx6/imx7: Remove now empty imx6_spl.h and imx7_spl.h There are now no flags being set in these files, so remove them. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
dd11fdc3 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_USB_FLAGS et al to CFG Perform simple renames of: CONFIG_MXC_USB_FLAGS to CFG_MXC_USB_FLAGS CONFIG_MXC_USB_PORT to CFG_MXC_USB_PORT CONFIG_MXC_USB_PORTSC to CFG_MXC_USB_PORTSC Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
4db38665 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_UART_BASE to CFG Perform a simple rename of CONFIG_MXC_UART_BASE to CFG_MXC_UART_BASE Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0613c36a |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_EXTRA_ENV_SETTINGS to CFG Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
54f80dd2 |
|
02-Dec-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_HOSTNAME et al to Kconfig This converts the following to Kconfig: CONFIG_GATEWAYIP CONFIG_HOSTNAME CONFIG_IPADDR CONFIG_NETMASK CONFIG_ROOTPATH CONFIG_SERVERIP CONFIG_UBOOTPATH To do this, we introduce a CONFIG_USE_ form of each of the above and change include/env_default.h to test for that to be set before setting a value. Further, we don't want to stringify the IP address related values as they are now properly strings via Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aec118eb |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
imx6/imx7: Remove now empty imx6_spl.h and imx7_spl.h There are now no flags being set in these files, so remove them. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
dd11fdc3 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_USB_FLAGS et al to CFG Perform simple renames of: CONFIG_MXC_USB_FLAGS to CFG_MXC_USB_FLAGS CONFIG_MXC_USB_PORT to CFG_MXC_USB_PORT CONFIG_MXC_USB_PORTSC to CFG_MXC_USB_PORTSC Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
4db38665 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_UART_BASE to CFG Perform a simple rename of CONFIG_MXC_UART_BASE to CFG_MXC_UART_BASE Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0613c36a |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_EXTRA_ENV_SETTINGS to CFG Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
54f80dd2 |
|
02-Dec-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_HOSTNAME et al to Kconfig This converts the following to Kconfig: CONFIG_GATEWAYIP CONFIG_HOSTNAME CONFIG_IPADDR CONFIG_NETMASK CONFIG_ROOTPATH CONFIG_SERVERIP CONFIG_UBOOTPATH To do this, we introduce a CONFIG_USE_ form of each of the above and change include/env_default.h to test for that to be set before setting a value. Further, we don't want to stringify the IP address related values as they are now properly strings via Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aec118eb |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
imx6/imx7: Remove now empty imx6_spl.h and imx7_spl.h There are now no flags being set in these files, so remove them. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
dd11fdc3 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_USB_FLAGS et al to CFG Perform simple renames of: CONFIG_MXC_USB_FLAGS to CFG_MXC_USB_FLAGS CONFIG_MXC_USB_PORT to CFG_MXC_USB_PORT CONFIG_MXC_USB_PORTSC to CFG_MXC_USB_PORTSC Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
4db38665 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_UART_BASE to CFG Perform a simple rename of CONFIG_MXC_UART_BASE to CFG_MXC_UART_BASE Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0613c36a |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_EXTRA_ENV_SETTINGS to CFG Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
54f80dd2 |
|
02-Dec-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_HOSTNAME et al to Kconfig This converts the following to Kconfig: CONFIG_GATEWAYIP CONFIG_HOSTNAME CONFIG_IPADDR CONFIG_NETMASK CONFIG_ROOTPATH CONFIG_SERVERIP CONFIG_UBOOTPATH To do this, we introduce a CONFIG_USE_ form of each of the above and change include/env_default.h to test for that to be set before setting a value. Further, we don't want to stringify the IP address related values as they are now properly strings via Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aec118eb |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
imx6/imx7: Remove now empty imx6_spl.h and imx7_spl.h There are now no flags being set in these files, so remove them. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
dd11fdc3 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_USB_FLAGS et al to CFG Perform simple renames of: CONFIG_MXC_USB_FLAGS to CFG_MXC_USB_FLAGS CONFIG_MXC_USB_PORT to CFG_MXC_USB_PORT CONFIG_MXC_USB_PORTSC to CFG_MXC_USB_PORTSC Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
4db38665 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_UART_BASE to CFG Perform a simple rename of CONFIG_MXC_UART_BASE to CFG_MXC_UART_BASE Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0613c36a |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_EXTRA_ENV_SETTINGS to CFG Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
54f80dd2 |
|
02-Dec-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_HOSTNAME et al to Kconfig This converts the following to Kconfig: CONFIG_GATEWAYIP CONFIG_HOSTNAME CONFIG_IPADDR CONFIG_NETMASK CONFIG_ROOTPATH CONFIG_SERVERIP CONFIG_UBOOTPATH To do this, we introduce a CONFIG_USE_ form of each of the above and change include/env_default.h to test for that to be set before setting a value. Further, we don't want to stringify the IP address related values as they are now properly strings via Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aec118eb |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
imx6/imx7: Remove now empty imx6_spl.h and imx7_spl.h There are now no flags being set in these files, so remove them. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
dd11fdc3 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_USB_FLAGS et al to CFG Perform simple renames of: CONFIG_MXC_USB_FLAGS to CFG_MXC_USB_FLAGS CONFIG_MXC_USB_PORT to CFG_MXC_USB_PORT CONFIG_MXC_USB_PORTSC to CFG_MXC_USB_PORTSC Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
4db38665 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_UART_BASE to CFG Perform a simple rename of CONFIG_MXC_UART_BASE to CFG_MXC_UART_BASE Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0613c36a |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_EXTRA_ENV_SETTINGS to CFG Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
54f80dd2 |
|
02-Dec-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_HOSTNAME et al to Kconfig This converts the following to Kconfig: CONFIG_GATEWAYIP CONFIG_HOSTNAME CONFIG_IPADDR CONFIG_NETMASK CONFIG_ROOTPATH CONFIG_SERVERIP CONFIG_UBOOTPATH To do this, we introduce a CONFIG_USE_ form of each of the above and change include/env_default.h to test for that to be set before setting a value. Further, we don't want to stringify the IP address related values as they are now properly strings via Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aec118eb |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
imx6/imx7: Remove now empty imx6_spl.h and imx7_spl.h There are now no flags being set in these files, so remove them. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
dd11fdc3 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_USB_FLAGS et al to CFG Perform simple renames of: CONFIG_MXC_USB_FLAGS to CFG_MXC_USB_FLAGS CONFIG_MXC_USB_PORT to CFG_MXC_USB_PORT CONFIG_MXC_USB_PORTSC to CFG_MXC_USB_PORTSC Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
4db38665 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_UART_BASE to CFG Perform a simple rename of CONFIG_MXC_UART_BASE to CFG_MXC_UART_BASE Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0613c36a |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_EXTRA_ENV_SETTINGS to CFG Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
54f80dd2 |
|
02-Dec-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_HOSTNAME et al to Kconfig This converts the following to Kconfig: CONFIG_GATEWAYIP CONFIG_HOSTNAME CONFIG_IPADDR CONFIG_NETMASK CONFIG_ROOTPATH CONFIG_SERVERIP CONFIG_UBOOTPATH To do this, we introduce a CONFIG_USE_ form of each of the above and change include/env_default.h to test for that to be set before setting a value. Further, we don't want to stringify the IP address related values as they are now properly strings via Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aec118eb |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
imx6/imx7: Remove now empty imx6_spl.h and imx7_spl.h There are now no flags being set in these files, so remove them. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
dd11fdc3 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_USB_FLAGS et al to CFG Perform simple renames of: CONFIG_MXC_USB_FLAGS to CFG_MXC_USB_FLAGS CONFIG_MXC_USB_PORT to CFG_MXC_USB_PORT CONFIG_MXC_USB_PORTSC to CFG_MXC_USB_PORTSC Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
4db38665 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_UART_BASE to CFG Perform a simple rename of CONFIG_MXC_UART_BASE to CFG_MXC_UART_BASE Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0613c36a |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_EXTRA_ENV_SETTINGS to CFG Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
54f80dd2 |
|
02-Dec-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_HOSTNAME et al to Kconfig This converts the following to Kconfig: CONFIG_GATEWAYIP CONFIG_HOSTNAME CONFIG_IPADDR CONFIG_NETMASK CONFIG_ROOTPATH CONFIG_SERVERIP CONFIG_UBOOTPATH To do this, we introduce a CONFIG_USE_ form of each of the above and change include/env_default.h to test for that to be set before setting a value. Further, we don't want to stringify the IP address related values as they are now properly strings via Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aec118eb |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
imx6/imx7: Remove now empty imx6_spl.h and imx7_spl.h There are now no flags being set in these files, so remove them. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
dd11fdc3 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_USB_FLAGS et al to CFG Perform simple renames of: CONFIG_MXC_USB_FLAGS to CFG_MXC_USB_FLAGS CONFIG_MXC_USB_PORT to CFG_MXC_USB_PORT CONFIG_MXC_USB_PORTSC to CFG_MXC_USB_PORTSC Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
4db38665 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_UART_BASE to CFG Perform a simple rename of CONFIG_MXC_UART_BASE to CFG_MXC_UART_BASE Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0613c36a |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_EXTRA_ENV_SETTINGS to CFG Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
54f80dd2 |
|
02-Dec-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_HOSTNAME et al to Kconfig This converts the following to Kconfig: CONFIG_GATEWAYIP CONFIG_HOSTNAME CONFIG_IPADDR CONFIG_NETMASK CONFIG_ROOTPATH CONFIG_SERVERIP CONFIG_UBOOTPATH To do this, we introduce a CONFIG_USE_ form of each of the above and change include/env_default.h to test for that to be set before setting a value. Further, we don't want to stringify the IP address related values as they are now properly strings via Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aec118eb |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
imx6/imx7: Remove now empty imx6_spl.h and imx7_spl.h There are now no flags being set in these files, so remove them. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
dd11fdc3 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_USB_FLAGS et al to CFG Perform simple renames of: CONFIG_MXC_USB_FLAGS to CFG_MXC_USB_FLAGS CONFIG_MXC_USB_PORT to CFG_MXC_USB_PORT CONFIG_MXC_USB_PORTSC to CFG_MXC_USB_PORTSC Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
4db38665 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_UART_BASE to CFG Perform a simple rename of CONFIG_MXC_UART_BASE to CFG_MXC_UART_BASE Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0613c36a |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_EXTRA_ENV_SETTINGS to CFG Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
54f80dd2 |
|
02-Dec-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_HOSTNAME et al to Kconfig This converts the following to Kconfig: CONFIG_GATEWAYIP CONFIG_HOSTNAME CONFIG_IPADDR CONFIG_NETMASK CONFIG_ROOTPATH CONFIG_SERVERIP CONFIG_UBOOTPATH To do this, we introduce a CONFIG_USE_ form of each of the above and change include/env_default.h to test for that to be set before setting a value. Further, we don't want to stringify the IP address related values as they are now properly strings via Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aec118eb |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
imx6/imx7: Remove now empty imx6_spl.h and imx7_spl.h There are now no flags being set in these files, so remove them. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
dd11fdc3 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_USB_FLAGS et al to CFG Perform simple renames of: CONFIG_MXC_USB_FLAGS to CFG_MXC_USB_FLAGS CONFIG_MXC_USB_PORT to CFG_MXC_USB_PORT CONFIG_MXC_USB_PORTSC to CFG_MXC_USB_PORTSC Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
4db38665 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_UART_BASE to CFG Perform a simple rename of CONFIG_MXC_UART_BASE to CFG_MXC_UART_BASE Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0613c36a |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_EXTRA_ENV_SETTINGS to CFG Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
54f80dd2 |
|
02-Dec-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_HOSTNAME et al to Kconfig This converts the following to Kconfig: CONFIG_GATEWAYIP CONFIG_HOSTNAME CONFIG_IPADDR CONFIG_NETMASK CONFIG_ROOTPATH CONFIG_SERVERIP CONFIG_UBOOTPATH To do this, we introduce a CONFIG_USE_ form of each of the above and change include/env_default.h to test for that to be set before setting a value. Further, we don't want to stringify the IP address related values as they are now properly strings via Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aec118eb |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
imx6/imx7: Remove now empty imx6_spl.h and imx7_spl.h There are now no flags being set in these files, so remove them. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
dd11fdc3 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_USB_FLAGS et al to CFG Perform simple renames of: CONFIG_MXC_USB_FLAGS to CFG_MXC_USB_FLAGS CONFIG_MXC_USB_PORT to CFG_MXC_USB_PORT CONFIG_MXC_USB_PORTSC to CFG_MXC_USB_PORTSC Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
4db38665 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_UART_BASE to CFG Perform a simple rename of CONFIG_MXC_UART_BASE to CFG_MXC_UART_BASE Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0613c36a |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_EXTRA_ENV_SETTINGS to CFG Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
54f80dd2 |
|
02-Dec-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_HOSTNAME et al to Kconfig This converts the following to Kconfig: CONFIG_GATEWAYIP CONFIG_HOSTNAME CONFIG_IPADDR CONFIG_NETMASK CONFIG_ROOTPATH CONFIG_SERVERIP CONFIG_UBOOTPATH To do this, we introduce a CONFIG_USE_ form of each of the above and change include/env_default.h to test for that to be set before setting a value. Further, we don't want to stringify the IP address related values as they are now properly strings via Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aec118eb |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
imx6/imx7: Remove now empty imx6_spl.h and imx7_spl.h There are now no flags being set in these files, so remove them. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
dd11fdc3 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_USB_FLAGS et al to CFG Perform simple renames of: CONFIG_MXC_USB_FLAGS to CFG_MXC_USB_FLAGS CONFIG_MXC_USB_PORT to CFG_MXC_USB_PORT CONFIG_MXC_USB_PORTSC to CFG_MXC_USB_PORTSC Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
4db38665 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_UART_BASE to CFG Perform a simple rename of CONFIG_MXC_UART_BASE to CFG_MXC_UART_BASE Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0613c36a |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_EXTRA_ENV_SETTINGS to CFG Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
54f80dd2 |
|
02-Dec-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_HOSTNAME et al to Kconfig This converts the following to Kconfig: CONFIG_GATEWAYIP CONFIG_HOSTNAME CONFIG_IPADDR CONFIG_NETMASK CONFIG_ROOTPATH CONFIG_SERVERIP CONFIG_UBOOTPATH To do this, we introduce a CONFIG_USE_ form of each of the above and change include/env_default.h to test for that to be set before setting a value. Further, we don't want to stringify the IP address related values as they are now properly strings via Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aec118eb |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
imx6/imx7: Remove now empty imx6_spl.h and imx7_spl.h There are now no flags being set in these files, so remove them. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
dd11fdc3 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_USB_FLAGS et al to CFG Perform simple renames of: CONFIG_MXC_USB_FLAGS to CFG_MXC_USB_FLAGS CONFIG_MXC_USB_PORT to CFG_MXC_USB_PORT CONFIG_MXC_USB_PORTSC to CFG_MXC_USB_PORTSC Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
4db38665 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_UART_BASE to CFG Perform a simple rename of CONFIG_MXC_UART_BASE to CFG_MXC_UART_BASE Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0613c36a |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_EXTRA_ENV_SETTINGS to CFG Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
54f80dd2 |
|
02-Dec-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_HOSTNAME et al to Kconfig This converts the following to Kconfig: CONFIG_GATEWAYIP CONFIG_HOSTNAME CONFIG_IPADDR CONFIG_NETMASK CONFIG_ROOTPATH CONFIG_SERVERIP CONFIG_UBOOTPATH To do this, we introduce a CONFIG_USE_ form of each of the above and change include/env_default.h to test for that to be set before setting a value. Further, we don't want to stringify the IP address related values as they are now properly strings via Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aec118eb |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
imx6/imx7: Remove now empty imx6_spl.h and imx7_spl.h There are now no flags being set in these files, so remove them. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
dd11fdc3 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_USB_FLAGS et al to CFG Perform simple renames of: CONFIG_MXC_USB_FLAGS to CFG_MXC_USB_FLAGS CONFIG_MXC_USB_PORT to CFG_MXC_USB_PORT CONFIG_MXC_USB_PORTSC to CFG_MXC_USB_PORTSC Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
4db38665 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_UART_BASE to CFG Perform a simple rename of CONFIG_MXC_UART_BASE to CFG_MXC_UART_BASE Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0613c36a |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_EXTRA_ENV_SETTINGS to CFG Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
54f80dd2 |
|
02-Dec-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_HOSTNAME et al to Kconfig This converts the following to Kconfig: CONFIG_GATEWAYIP CONFIG_HOSTNAME CONFIG_IPADDR CONFIG_NETMASK CONFIG_ROOTPATH CONFIG_SERVERIP CONFIG_UBOOTPATH To do this, we introduce a CONFIG_USE_ form of each of the above and change include/env_default.h to test for that to be set before setting a value. Further, we don't want to stringify the IP address related values as they are now properly strings via Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aec118eb |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
imx6/imx7: Remove now empty imx6_spl.h and imx7_spl.h There are now no flags being set in these files, so remove them. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
dd11fdc3 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_USB_FLAGS et al to CFG Perform simple renames of: CONFIG_MXC_USB_FLAGS to CFG_MXC_USB_FLAGS CONFIG_MXC_USB_PORT to CFG_MXC_USB_PORT CONFIG_MXC_USB_PORTSC to CFG_MXC_USB_PORTSC Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
4db38665 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_UART_BASE to CFG Perform a simple rename of CONFIG_MXC_UART_BASE to CFG_MXC_UART_BASE Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0613c36a |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_EXTRA_ENV_SETTINGS to CFG Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
54f80dd2 |
|
02-Dec-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_HOSTNAME et al to Kconfig This converts the following to Kconfig: CONFIG_GATEWAYIP CONFIG_HOSTNAME CONFIG_IPADDR CONFIG_NETMASK CONFIG_ROOTPATH CONFIG_SERVERIP CONFIG_UBOOTPATH To do this, we introduce a CONFIG_USE_ form of each of the above and change include/env_default.h to test for that to be set before setting a value. Further, we don't want to stringify the IP address related values as they are now properly strings via Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aec118eb |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
imx6/imx7: Remove now empty imx6_spl.h and imx7_spl.h There are now no flags being set in these files, so remove them. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
dd11fdc3 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_USB_FLAGS et al to CFG Perform simple renames of: CONFIG_MXC_USB_FLAGS to CFG_MXC_USB_FLAGS CONFIG_MXC_USB_PORT to CFG_MXC_USB_PORT CONFIG_MXC_USB_PORTSC to CFG_MXC_USB_PORTSC Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
4db38665 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_UART_BASE to CFG Perform a simple rename of CONFIG_MXC_UART_BASE to CFG_MXC_UART_BASE Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0613c36a |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_EXTRA_ENV_SETTINGS to CFG Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
54f80dd2 |
|
02-Dec-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_HOSTNAME et al to Kconfig This converts the following to Kconfig: CONFIG_GATEWAYIP CONFIG_HOSTNAME CONFIG_IPADDR CONFIG_NETMASK CONFIG_ROOTPATH CONFIG_SERVERIP CONFIG_UBOOTPATH To do this, we introduce a CONFIG_USE_ form of each of the above and change include/env_default.h to test for that to be set before setting a value. Further, we don't want to stringify the IP address related values as they are now properly strings via Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aec118eb |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
imx6/imx7: Remove now empty imx6_spl.h and imx7_spl.h There are now no flags being set in these files, so remove them. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
dd11fdc3 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_USB_FLAGS et al to CFG Perform simple renames of: CONFIG_MXC_USB_FLAGS to CFG_MXC_USB_FLAGS CONFIG_MXC_USB_PORT to CFG_MXC_USB_PORT CONFIG_MXC_USB_PORTSC to CFG_MXC_USB_PORTSC Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
4db38665 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_UART_BASE to CFG Perform a simple rename of CONFIG_MXC_UART_BASE to CFG_MXC_UART_BASE Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0613c36a |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_EXTRA_ENV_SETTINGS to CFG Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
54f80dd2 |
|
02-Dec-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_HOSTNAME et al to Kconfig This converts the following to Kconfig: CONFIG_GATEWAYIP CONFIG_HOSTNAME CONFIG_IPADDR CONFIG_NETMASK CONFIG_ROOTPATH CONFIG_SERVERIP CONFIG_UBOOTPATH To do this, we introduce a CONFIG_USE_ form of each of the above and change include/env_default.h to test for that to be set before setting a value. Further, we don't want to stringify the IP address related values as they are now properly strings via Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aec118eb |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
imx6/imx7: Remove now empty imx6_spl.h and imx7_spl.h There are now no flags being set in these files, so remove them. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
dd11fdc3 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_USB_FLAGS et al to CFG Perform simple renames of: CONFIG_MXC_USB_FLAGS to CFG_MXC_USB_FLAGS CONFIG_MXC_USB_PORT to CFG_MXC_USB_PORT CONFIG_MXC_USB_PORTSC to CFG_MXC_USB_PORTSC Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
4db38665 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_UART_BASE to CFG Perform a simple rename of CONFIG_MXC_UART_BASE to CFG_MXC_UART_BASE Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0613c36a |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_EXTRA_ENV_SETTINGS to CFG Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
54f80dd2 |
|
02-Dec-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_HOSTNAME et al to Kconfig This converts the following to Kconfig: CONFIG_GATEWAYIP CONFIG_HOSTNAME CONFIG_IPADDR CONFIG_NETMASK CONFIG_ROOTPATH CONFIG_SERVERIP CONFIG_UBOOTPATH To do this, we introduce a CONFIG_USE_ form of each of the above and change include/env_default.h to test for that to be set before setting a value. Further, we don't want to stringify the IP address related values as they are now properly strings via Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aec118eb |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
imx6/imx7: Remove now empty imx6_spl.h and imx7_spl.h There are now no flags being set in these files, so remove them. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
dd11fdc3 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_USB_FLAGS et al to CFG Perform simple renames of: CONFIG_MXC_USB_FLAGS to CFG_MXC_USB_FLAGS CONFIG_MXC_USB_PORT to CFG_MXC_USB_PORT CONFIG_MXC_USB_PORTSC to CFG_MXC_USB_PORTSC Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
4db38665 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_UART_BASE to CFG Perform a simple rename of CONFIG_MXC_UART_BASE to CFG_MXC_UART_BASE Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0613c36a |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_EXTRA_ENV_SETTINGS to CFG Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
54f80dd2 |
|
02-Dec-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_HOSTNAME et al to Kconfig This converts the following to Kconfig: CONFIG_GATEWAYIP CONFIG_HOSTNAME CONFIG_IPADDR CONFIG_NETMASK CONFIG_ROOTPATH CONFIG_SERVERIP CONFIG_UBOOTPATH To do this, we introduce a CONFIG_USE_ form of each of the above and change include/env_default.h to test for that to be set before setting a value. Further, we don't want to stringify the IP address related values as they are now properly strings via Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aec118eb |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
imx6/imx7: Remove now empty imx6_spl.h and imx7_spl.h There are now no flags being set in these files, so remove them. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
dd11fdc3 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_USB_FLAGS et al to CFG Perform simple renames of: CONFIG_MXC_USB_FLAGS to CFG_MXC_USB_FLAGS CONFIG_MXC_USB_PORT to CFG_MXC_USB_PORT CONFIG_MXC_USB_PORTSC to CFG_MXC_USB_PORTSC Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
4db38665 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_UART_BASE to CFG Perform a simple rename of CONFIG_MXC_UART_BASE to CFG_MXC_UART_BASE Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0613c36a |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_EXTRA_ENV_SETTINGS to CFG Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
54f80dd2 |
|
02-Dec-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_HOSTNAME et al to Kconfig This converts the following to Kconfig: CONFIG_GATEWAYIP CONFIG_HOSTNAME CONFIG_IPADDR CONFIG_NETMASK CONFIG_ROOTPATH CONFIG_SERVERIP CONFIG_UBOOTPATH To do this, we introduce a CONFIG_USE_ form of each of the above and change include/env_default.h to test for that to be set before setting a value. Further, we don't want to stringify the IP address related values as they are now properly strings via Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aec118eb |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
imx6/imx7: Remove now empty imx6_spl.h and imx7_spl.h There are now no flags being set in these files, so remove them. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
dd11fdc3 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_USB_FLAGS et al to CFG Perform simple renames of: CONFIG_MXC_USB_FLAGS to CFG_MXC_USB_FLAGS CONFIG_MXC_USB_PORT to CFG_MXC_USB_PORT CONFIG_MXC_USB_PORTSC to CFG_MXC_USB_PORTSC Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
4db38665 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_UART_BASE to CFG Perform a simple rename of CONFIG_MXC_UART_BASE to CFG_MXC_UART_BASE Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0613c36a |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_EXTRA_ENV_SETTINGS to CFG Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
54f80dd2 |
|
02-Dec-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_HOSTNAME et al to Kconfig This converts the following to Kconfig: CONFIG_GATEWAYIP CONFIG_HOSTNAME CONFIG_IPADDR CONFIG_NETMASK CONFIG_ROOTPATH CONFIG_SERVERIP CONFIG_UBOOTPATH To do this, we introduce a CONFIG_USE_ form of each of the above and change include/env_default.h to test for that to be set before setting a value. Further, we don't want to stringify the IP address related values as they are now properly strings via Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aec118eb |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
imx6/imx7: Remove now empty imx6_spl.h and imx7_spl.h There are now no flags being set in these files, so remove them. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
dd11fdc3 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_USB_FLAGS et al to CFG Perform simple renames of: CONFIG_MXC_USB_FLAGS to CFG_MXC_USB_FLAGS CONFIG_MXC_USB_PORT to CFG_MXC_USB_PORT CONFIG_MXC_USB_PORTSC to CFG_MXC_USB_PORTSC Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
4db38665 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_UART_BASE to CFG Perform a simple rename of CONFIG_MXC_UART_BASE to CFG_MXC_UART_BASE Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0613c36a |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_EXTRA_ENV_SETTINGS to CFG Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
54f80dd2 |
|
02-Dec-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_HOSTNAME et al to Kconfig This converts the following to Kconfig: CONFIG_GATEWAYIP CONFIG_HOSTNAME CONFIG_IPADDR CONFIG_NETMASK CONFIG_ROOTPATH CONFIG_SERVERIP CONFIG_UBOOTPATH To do this, we introduce a CONFIG_USE_ form of each of the above and change include/env_default.h to test for that to be set before setting a value. Further, we don't want to stringify the IP address related values as they are now properly strings via Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aec118eb |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
imx6/imx7: Remove now empty imx6_spl.h and imx7_spl.h There are now no flags being set in these files, so remove them. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
dd11fdc3 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_USB_FLAGS et al to CFG Perform simple renames of: CONFIG_MXC_USB_FLAGS to CFG_MXC_USB_FLAGS CONFIG_MXC_USB_PORT to CFG_MXC_USB_PORT CONFIG_MXC_USB_PORTSC to CFG_MXC_USB_PORTSC Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
4db38665 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_UART_BASE to CFG Perform a simple rename of CONFIG_MXC_UART_BASE to CFG_MXC_UART_BASE Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0613c36a |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_EXTRA_ENV_SETTINGS to CFG Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
54f80dd2 |
|
02-Dec-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_HOSTNAME et al to Kconfig This converts the following to Kconfig: CONFIG_GATEWAYIP CONFIG_HOSTNAME CONFIG_IPADDR CONFIG_NETMASK CONFIG_ROOTPATH CONFIG_SERVERIP CONFIG_UBOOTPATH To do this, we introduce a CONFIG_USE_ form of each of the above and change include/env_default.h to test for that to be set before setting a value. Further, we don't want to stringify the IP address related values as they are now properly strings via Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aec118eb |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
imx6/imx7: Remove now empty imx6_spl.h and imx7_spl.h There are now no flags being set in these files, so remove them. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
dd11fdc3 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_USB_FLAGS et al to CFG Perform simple renames of: CONFIG_MXC_USB_FLAGS to CFG_MXC_USB_FLAGS CONFIG_MXC_USB_PORT to CFG_MXC_USB_PORT CONFIG_MXC_USB_PORTSC to CFG_MXC_USB_PORTSC Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
4db38665 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_UART_BASE to CFG Perform a simple rename of CONFIG_MXC_UART_BASE to CFG_MXC_UART_BASE Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0613c36a |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_EXTRA_ENV_SETTINGS to CFG Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
54f80dd2 |
|
02-Dec-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_HOSTNAME et al to Kconfig This converts the following to Kconfig: CONFIG_GATEWAYIP CONFIG_HOSTNAME CONFIG_IPADDR CONFIG_NETMASK CONFIG_ROOTPATH CONFIG_SERVERIP CONFIG_UBOOTPATH To do this, we introduce a CONFIG_USE_ form of each of the above and change include/env_default.h to test for that to be set before setting a value. Further, we don't want to stringify the IP address related values as they are now properly strings via Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aec118eb |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
imx6/imx7: Remove now empty imx6_spl.h and imx7_spl.h There are now no flags being set in these files, so remove them. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
dd11fdc3 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_USB_FLAGS et al to CFG Perform simple renames of: CONFIG_MXC_USB_FLAGS to CFG_MXC_USB_FLAGS CONFIG_MXC_USB_PORT to CFG_MXC_USB_PORT CONFIG_MXC_USB_PORTSC to CFG_MXC_USB_PORTSC Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
4db38665 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_UART_BASE to CFG Perform a simple rename of CONFIG_MXC_UART_BASE to CFG_MXC_UART_BASE Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0613c36a |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_EXTRA_ENV_SETTINGS to CFG Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
54f80dd2 |
|
02-Dec-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_HOSTNAME et al to Kconfig This converts the following to Kconfig: CONFIG_GATEWAYIP CONFIG_HOSTNAME CONFIG_IPADDR CONFIG_NETMASK CONFIG_ROOTPATH CONFIG_SERVERIP CONFIG_UBOOTPATH To do this, we introduce a CONFIG_USE_ form of each of the above and change include/env_default.h to test for that to be set before setting a value. Further, we don't want to stringify the IP address related values as they are now properly strings via Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aec118eb |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
imx6/imx7: Remove now empty imx6_spl.h and imx7_spl.h There are now no flags being set in these files, so remove them. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
dd11fdc3 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_USB_FLAGS et al to CFG Perform simple renames of: CONFIG_MXC_USB_FLAGS to CFG_MXC_USB_FLAGS CONFIG_MXC_USB_PORT to CFG_MXC_USB_PORT CONFIG_MXC_USB_PORTSC to CFG_MXC_USB_PORTSC Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
4db38665 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_UART_BASE to CFG Perform a simple rename of CONFIG_MXC_UART_BASE to CFG_MXC_UART_BASE Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0613c36a |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_EXTRA_ENV_SETTINGS to CFG Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
54f80dd2 |
|
02-Dec-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_HOSTNAME et al to Kconfig This converts the following to Kconfig: CONFIG_GATEWAYIP CONFIG_HOSTNAME CONFIG_IPADDR CONFIG_NETMASK CONFIG_ROOTPATH CONFIG_SERVERIP CONFIG_UBOOTPATH To do this, we introduce a CONFIG_USE_ form of each of the above and change include/env_default.h to test for that to be set before setting a value. Further, we don't want to stringify the IP address related values as they are now properly strings via Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aec118eb |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
imx6/imx7: Remove now empty imx6_spl.h and imx7_spl.h There are now no flags being set in these files, so remove them. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
dd11fdc3 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_USB_FLAGS et al to CFG Perform simple renames of: CONFIG_MXC_USB_FLAGS to CFG_MXC_USB_FLAGS CONFIG_MXC_USB_PORT to CFG_MXC_USB_PORT CONFIG_MXC_USB_PORTSC to CFG_MXC_USB_PORTSC Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
4db38665 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_UART_BASE to CFG Perform a simple rename of CONFIG_MXC_UART_BASE to CFG_MXC_UART_BASE Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0613c36a |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_EXTRA_ENV_SETTINGS to CFG Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
54f80dd2 |
|
02-Dec-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_HOSTNAME et al to Kconfig This converts the following to Kconfig: CONFIG_GATEWAYIP CONFIG_HOSTNAME CONFIG_IPADDR CONFIG_NETMASK CONFIG_ROOTPATH CONFIG_SERVERIP CONFIG_UBOOTPATH To do this, we introduce a CONFIG_USE_ form of each of the above and change include/env_default.h to test for that to be set before setting a value. Further, we don't want to stringify the IP address related values as they are now properly strings via Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aec118eb |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
imx6/imx7: Remove now empty imx6_spl.h and imx7_spl.h There are now no flags being set in these files, so remove them. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
dd11fdc3 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_USB_FLAGS et al to CFG Perform simple renames of: CONFIG_MXC_USB_FLAGS to CFG_MXC_USB_FLAGS CONFIG_MXC_USB_PORT to CFG_MXC_USB_PORT CONFIG_MXC_USB_PORTSC to CFG_MXC_USB_PORTSC Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
4db38665 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_UART_BASE to CFG Perform a simple rename of CONFIG_MXC_UART_BASE to CFG_MXC_UART_BASE Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0613c36a |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_EXTRA_ENV_SETTINGS to CFG Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
54f80dd2 |
|
02-Dec-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_HOSTNAME et al to Kconfig This converts the following to Kconfig: CONFIG_GATEWAYIP CONFIG_HOSTNAME CONFIG_IPADDR CONFIG_NETMASK CONFIG_ROOTPATH CONFIG_SERVERIP CONFIG_UBOOTPATH To do this, we introduce a CONFIG_USE_ form of each of the above and change include/env_default.h to test for that to be set before setting a value. Further, we don't want to stringify the IP address related values as they are now properly strings via Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aec118eb |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
imx6/imx7: Remove now empty imx6_spl.h and imx7_spl.h There are now no flags being set in these files, so remove them. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
dd11fdc3 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_USB_FLAGS et al to CFG Perform simple renames of: CONFIG_MXC_USB_FLAGS to CFG_MXC_USB_FLAGS CONFIG_MXC_USB_PORT to CFG_MXC_USB_PORT CONFIG_MXC_USB_PORTSC to CFG_MXC_USB_PORTSC Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
4db38665 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_UART_BASE to CFG Perform a simple rename of CONFIG_MXC_UART_BASE to CFG_MXC_UART_BASE Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0613c36a |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_EXTRA_ENV_SETTINGS to CFG Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
54f80dd2 |
|
02-Dec-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_HOSTNAME et al to Kconfig This converts the following to Kconfig: CONFIG_GATEWAYIP CONFIG_HOSTNAME CONFIG_IPADDR CONFIG_NETMASK CONFIG_ROOTPATH CONFIG_SERVERIP CONFIG_UBOOTPATH To do this, we introduce a CONFIG_USE_ form of each of the above and change include/env_default.h to test for that to be set before setting a value. Further, we don't want to stringify the IP address related values as they are now properly strings via Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aec118eb |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
imx6/imx7: Remove now empty imx6_spl.h and imx7_spl.h There are now no flags being set in these files, so remove them. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
dd11fdc3 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_USB_FLAGS et al to CFG Perform simple renames of: CONFIG_MXC_USB_FLAGS to CFG_MXC_USB_FLAGS CONFIG_MXC_USB_PORT to CFG_MXC_USB_PORT CONFIG_MXC_USB_PORTSC to CFG_MXC_USB_PORTSC Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
4db38665 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_UART_BASE to CFG Perform a simple rename of CONFIG_MXC_UART_BASE to CFG_MXC_UART_BASE Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0613c36a |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_EXTRA_ENV_SETTINGS to CFG Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
54f80dd2 |
|
02-Dec-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_HOSTNAME et al to Kconfig This converts the following to Kconfig: CONFIG_GATEWAYIP CONFIG_HOSTNAME CONFIG_IPADDR CONFIG_NETMASK CONFIG_ROOTPATH CONFIG_SERVERIP CONFIG_UBOOTPATH To do this, we introduce a CONFIG_USE_ form of each of the above and change include/env_default.h to test for that to be set before setting a value. Further, we don't want to stringify the IP address related values as they are now properly strings via Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aec118eb |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
imx6/imx7: Remove now empty imx6_spl.h and imx7_spl.h There are now no flags being set in these files, so remove them. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
dd11fdc3 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_USB_FLAGS et al to CFG Perform simple renames of: CONFIG_MXC_USB_FLAGS to CFG_MXC_USB_FLAGS CONFIG_MXC_USB_PORT to CFG_MXC_USB_PORT CONFIG_MXC_USB_PORTSC to CFG_MXC_USB_PORTSC Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
4db38665 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_UART_BASE to CFG Perform a simple rename of CONFIG_MXC_UART_BASE to CFG_MXC_UART_BASE Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0613c36a |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_EXTRA_ENV_SETTINGS to CFG Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
54f80dd2 |
|
02-Dec-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_HOSTNAME et al to Kconfig This converts the following to Kconfig: CONFIG_GATEWAYIP CONFIG_HOSTNAME CONFIG_IPADDR CONFIG_NETMASK CONFIG_ROOTPATH CONFIG_SERVERIP CONFIG_UBOOTPATH To do this, we introduce a CONFIG_USE_ form of each of the above and change include/env_default.h to test for that to be set before setting a value. Further, we don't want to stringify the IP address related values as they are now properly strings via Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aec118eb |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
imx6/imx7: Remove now empty imx6_spl.h and imx7_spl.h There are now no flags being set in these files, so remove them. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
dd11fdc3 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_USB_FLAGS et al to CFG Perform simple renames of: CONFIG_MXC_USB_FLAGS to CFG_MXC_USB_FLAGS CONFIG_MXC_USB_PORT to CFG_MXC_USB_PORT CONFIG_MXC_USB_PORTSC to CFG_MXC_USB_PORTSC Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
4db38665 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_UART_BASE to CFG Perform a simple rename of CONFIG_MXC_UART_BASE to CFG_MXC_UART_BASE Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0613c36a |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_EXTRA_ENV_SETTINGS to CFG Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
54f80dd2 |
|
02-Dec-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_HOSTNAME et al to Kconfig This converts the following to Kconfig: CONFIG_GATEWAYIP CONFIG_HOSTNAME CONFIG_IPADDR CONFIG_NETMASK CONFIG_ROOTPATH CONFIG_SERVERIP CONFIG_UBOOTPATH To do this, we introduce a CONFIG_USE_ form of each of the above and change include/env_default.h to test for that to be set before setting a value. Further, we don't want to stringify the IP address related values as they are now properly strings via Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aec118eb |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
imx6/imx7: Remove now empty imx6_spl.h and imx7_spl.h There are now no flags being set in these files, so remove them. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
dd11fdc3 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_USB_FLAGS et al to CFG Perform simple renames of: CONFIG_MXC_USB_FLAGS to CFG_MXC_USB_FLAGS CONFIG_MXC_USB_PORT to CFG_MXC_USB_PORT CONFIG_MXC_USB_PORTSC to CFG_MXC_USB_PORTSC Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
4db38665 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_UART_BASE to CFG Perform a simple rename of CONFIG_MXC_UART_BASE to CFG_MXC_UART_BASE Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0613c36a |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_EXTRA_ENV_SETTINGS to CFG Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
54f80dd2 |
|
02-Dec-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_HOSTNAME et al to Kconfig This converts the following to Kconfig: CONFIG_GATEWAYIP CONFIG_HOSTNAME CONFIG_IPADDR CONFIG_NETMASK CONFIG_ROOTPATH CONFIG_SERVERIP CONFIG_UBOOTPATH To do this, we introduce a CONFIG_USE_ form of each of the above and change include/env_default.h to test for that to be set before setting a value. Further, we don't want to stringify the IP address related values as they are now properly strings via Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aec118eb |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
imx6/imx7: Remove now empty imx6_spl.h and imx7_spl.h There are now no flags being set in these files, so remove them. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
dd11fdc3 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_USB_FLAGS et al to CFG Perform simple renames of: CONFIG_MXC_USB_FLAGS to CFG_MXC_USB_FLAGS CONFIG_MXC_USB_PORT to CFG_MXC_USB_PORT CONFIG_MXC_USB_PORTSC to CFG_MXC_USB_PORTSC Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
4db38665 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_UART_BASE to CFG Perform a simple rename of CONFIG_MXC_UART_BASE to CFG_MXC_UART_BASE Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0613c36a |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_EXTRA_ENV_SETTINGS to CFG Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
54f80dd2 |
|
02-Dec-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_HOSTNAME et al to Kconfig This converts the following to Kconfig: CONFIG_GATEWAYIP CONFIG_HOSTNAME CONFIG_IPADDR CONFIG_NETMASK CONFIG_ROOTPATH CONFIG_SERVERIP CONFIG_UBOOTPATH To do this, we introduce a CONFIG_USE_ form of each of the above and change include/env_default.h to test for that to be set before setting a value. Further, we don't want to stringify the IP address related values as they are now properly strings via Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aec118eb |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
imx6/imx7: Remove now empty imx6_spl.h and imx7_spl.h There are now no flags being set in these files, so remove them. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
dd11fdc3 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_USB_FLAGS et al to CFG Perform simple renames of: CONFIG_MXC_USB_FLAGS to CFG_MXC_USB_FLAGS CONFIG_MXC_USB_PORT to CFG_MXC_USB_PORT CONFIG_MXC_USB_PORTSC to CFG_MXC_USB_PORTSC Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
4db38665 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_UART_BASE to CFG Perform a simple rename of CONFIG_MXC_UART_BASE to CFG_MXC_UART_BASE Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0613c36a |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_EXTRA_ENV_SETTINGS to CFG Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
54f80dd2 |
|
02-Dec-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_HOSTNAME et al to Kconfig This converts the following to Kconfig: CONFIG_GATEWAYIP CONFIG_HOSTNAME CONFIG_IPADDR CONFIG_NETMASK CONFIG_ROOTPATH CONFIG_SERVERIP CONFIG_UBOOTPATH To do this, we introduce a CONFIG_USE_ form of each of the above and change include/env_default.h to test for that to be set before setting a value. Further, we don't want to stringify the IP address related values as they are now properly strings via Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aec118eb |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
imx6/imx7: Remove now empty imx6_spl.h and imx7_spl.h There are now no flags being set in these files, so remove them. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
dd11fdc3 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_USB_FLAGS et al to CFG Perform simple renames of: CONFIG_MXC_USB_FLAGS to CFG_MXC_USB_FLAGS CONFIG_MXC_USB_PORT to CFG_MXC_USB_PORT CONFIG_MXC_USB_PORTSC to CFG_MXC_USB_PORTSC Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
4db38665 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_UART_BASE to CFG Perform a simple rename of CONFIG_MXC_UART_BASE to CFG_MXC_UART_BASE Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0613c36a |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_EXTRA_ENV_SETTINGS to CFG Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
54f80dd2 |
|
02-Dec-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_HOSTNAME et al to Kconfig This converts the following to Kconfig: CONFIG_GATEWAYIP CONFIG_HOSTNAME CONFIG_IPADDR CONFIG_NETMASK CONFIG_ROOTPATH CONFIG_SERVERIP CONFIG_UBOOTPATH To do this, we introduce a CONFIG_USE_ form of each of the above and change include/env_default.h to test for that to be set before setting a value. Further, we don't want to stringify the IP address related values as they are now properly strings via Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aec118eb |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
imx6/imx7: Remove now empty imx6_spl.h and imx7_spl.h There are now no flags being set in these files, so remove them. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
dd11fdc3 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_USB_FLAGS et al to CFG Perform simple renames of: CONFIG_MXC_USB_FLAGS to CFG_MXC_USB_FLAGS CONFIG_MXC_USB_PORT to CFG_MXC_USB_PORT CONFIG_MXC_USB_PORTSC to CFG_MXC_USB_PORTSC Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
4db38665 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_UART_BASE to CFG Perform a simple rename of CONFIG_MXC_UART_BASE to CFG_MXC_UART_BASE Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0613c36a |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_EXTRA_ENV_SETTINGS to CFG Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
54f80dd2 |
|
02-Dec-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_HOSTNAME et al to Kconfig This converts the following to Kconfig: CONFIG_GATEWAYIP CONFIG_HOSTNAME CONFIG_IPADDR CONFIG_NETMASK CONFIG_ROOTPATH CONFIG_SERVERIP CONFIG_UBOOTPATH To do this, we introduce a CONFIG_USE_ form of each of the above and change include/env_default.h to test for that to be set before setting a value. Further, we don't want to stringify the IP address related values as they are now properly strings via Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aec118eb |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
imx6/imx7: Remove now empty imx6_spl.h and imx7_spl.h There are now no flags being set in these files, so remove them. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
dd11fdc3 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_USB_FLAGS et al to CFG Perform simple renames of: CONFIG_MXC_USB_FLAGS to CFG_MXC_USB_FLAGS CONFIG_MXC_USB_PORT to CFG_MXC_USB_PORT CONFIG_MXC_USB_PORTSC to CFG_MXC_USB_PORTSC Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
4db38665 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_UART_BASE to CFG Perform a simple rename of CONFIG_MXC_UART_BASE to CFG_MXC_UART_BASE Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0613c36a |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_EXTRA_ENV_SETTINGS to CFG Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
54f80dd2 |
|
02-Dec-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_HOSTNAME et al to Kconfig This converts the following to Kconfig: CONFIG_GATEWAYIP CONFIG_HOSTNAME CONFIG_IPADDR CONFIG_NETMASK CONFIG_ROOTPATH CONFIG_SERVERIP CONFIG_UBOOTPATH To do this, we introduce a CONFIG_USE_ form of each of the above and change include/env_default.h to test for that to be set before setting a value. Further, we don't want to stringify the IP address related values as they are now properly strings via Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aec118eb |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
imx6/imx7: Remove now empty imx6_spl.h and imx7_spl.h There are now no flags being set in these files, so remove them. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
dd11fdc3 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_USB_FLAGS et al to CFG Perform simple renames of: CONFIG_MXC_USB_FLAGS to CFG_MXC_USB_FLAGS CONFIG_MXC_USB_PORT to CFG_MXC_USB_PORT CONFIG_MXC_USB_PORTSC to CFG_MXC_USB_PORTSC Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
4db38665 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_UART_BASE to CFG Perform a simple rename of CONFIG_MXC_UART_BASE to CFG_MXC_UART_BASE Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0613c36a |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_EXTRA_ENV_SETTINGS to CFG Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
54f80dd2 |
|
02-Dec-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_HOSTNAME et al to Kconfig This converts the following to Kconfig: CONFIG_GATEWAYIP CONFIG_HOSTNAME CONFIG_IPADDR CONFIG_NETMASK CONFIG_ROOTPATH CONFIG_SERVERIP CONFIG_UBOOTPATH To do this, we introduce a CONFIG_USE_ form of each of the above and change include/env_default.h to test for that to be set before setting a value. Further, we don't want to stringify the IP address related values as they are now properly strings via Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aec118eb |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
imx6/imx7: Remove now empty imx6_spl.h and imx7_spl.h There are now no flags being set in these files, so remove them. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
dd11fdc3 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_USB_FLAGS et al to CFG Perform simple renames of: CONFIG_MXC_USB_FLAGS to CFG_MXC_USB_FLAGS CONFIG_MXC_USB_PORT to CFG_MXC_USB_PORT CONFIG_MXC_USB_PORTSC to CFG_MXC_USB_PORTSC Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
4db38665 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_UART_BASE to CFG Perform a simple rename of CONFIG_MXC_UART_BASE to CFG_MXC_UART_BASE Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0613c36a |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_EXTRA_ENV_SETTINGS to CFG Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
54f80dd2 |
|
02-Dec-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_HOSTNAME et al to Kconfig This converts the following to Kconfig: CONFIG_GATEWAYIP CONFIG_HOSTNAME CONFIG_IPADDR CONFIG_NETMASK CONFIG_ROOTPATH CONFIG_SERVERIP CONFIG_UBOOTPATH To do this, we introduce a CONFIG_USE_ form of each of the above and change include/env_default.h to test for that to be set before setting a value. Further, we don't want to stringify the IP address related values as they are now properly strings via Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aec118eb |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
imx6/imx7: Remove now empty imx6_spl.h and imx7_spl.h There are now no flags being set in these files, so remove them. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
dd11fdc3 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_USB_FLAGS et al to CFG Perform simple renames of: CONFIG_MXC_USB_FLAGS to CFG_MXC_USB_FLAGS CONFIG_MXC_USB_PORT to CFG_MXC_USB_PORT CONFIG_MXC_USB_PORTSC to CFG_MXC_USB_PORTSC Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
4db38665 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_UART_BASE to CFG Perform a simple rename of CONFIG_MXC_UART_BASE to CFG_MXC_UART_BASE Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0613c36a |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_EXTRA_ENV_SETTINGS to CFG Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
54f80dd2 |
|
02-Dec-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_HOSTNAME et al to Kconfig This converts the following to Kconfig: CONFIG_GATEWAYIP CONFIG_HOSTNAME CONFIG_IPADDR CONFIG_NETMASK CONFIG_ROOTPATH CONFIG_SERVERIP CONFIG_UBOOTPATH To do this, we introduce a CONFIG_USE_ form of each of the above and change include/env_default.h to test for that to be set before setting a value. Further, we don't want to stringify the IP address related values as they are now properly strings via Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aec118eb |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
imx6/imx7: Remove now empty imx6_spl.h and imx7_spl.h There are now no flags being set in these files, so remove them. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
dd11fdc3 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_USB_FLAGS et al to CFG Perform simple renames of: CONFIG_MXC_USB_FLAGS to CFG_MXC_USB_FLAGS CONFIG_MXC_USB_PORT to CFG_MXC_USB_PORT CONFIG_MXC_USB_PORTSC to CFG_MXC_USB_PORTSC Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
4db38665 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_UART_BASE to CFG Perform a simple rename of CONFIG_MXC_UART_BASE to CFG_MXC_UART_BASE Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0613c36a |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_EXTRA_ENV_SETTINGS to CFG Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
54f80dd2 |
|
02-Dec-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_HOSTNAME et al to Kconfig This converts the following to Kconfig: CONFIG_GATEWAYIP CONFIG_HOSTNAME CONFIG_IPADDR CONFIG_NETMASK CONFIG_ROOTPATH CONFIG_SERVERIP CONFIG_UBOOTPATH To do this, we introduce a CONFIG_USE_ form of each of the above and change include/env_default.h to test for that to be set before setting a value. Further, we don't want to stringify the IP address related values as they are now properly strings via Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aec118eb |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
imx6/imx7: Remove now empty imx6_spl.h and imx7_spl.h There are now no flags being set in these files, so remove them. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
dd11fdc3 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_USB_FLAGS et al to CFG Perform simple renames of: CONFIG_MXC_USB_FLAGS to CFG_MXC_USB_FLAGS CONFIG_MXC_USB_PORT to CFG_MXC_USB_PORT CONFIG_MXC_USB_PORTSC to CFG_MXC_USB_PORTSC Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
4db38665 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_UART_BASE to CFG Perform a simple rename of CONFIG_MXC_UART_BASE to CFG_MXC_UART_BASE Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0613c36a |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_EXTRA_ENV_SETTINGS to CFG Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
54f80dd2 |
|
02-Dec-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_HOSTNAME et al to Kconfig This converts the following to Kconfig: CONFIG_GATEWAYIP CONFIG_HOSTNAME CONFIG_IPADDR CONFIG_NETMASK CONFIG_ROOTPATH CONFIG_SERVERIP CONFIG_UBOOTPATH To do this, we introduce a CONFIG_USE_ form of each of the above and change include/env_default.h to test for that to be set before setting a value. Further, we don't want to stringify the IP address related values as they are now properly strings via Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aec118eb |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
imx6/imx7: Remove now empty imx6_spl.h and imx7_spl.h There are now no flags being set in these files, so remove them. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
dd11fdc3 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_USB_FLAGS et al to CFG Perform simple renames of: CONFIG_MXC_USB_FLAGS to CFG_MXC_USB_FLAGS CONFIG_MXC_USB_PORT to CFG_MXC_USB_PORT CONFIG_MXC_USB_PORTSC to CFG_MXC_USB_PORTSC Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
4db38665 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_UART_BASE to CFG Perform a simple rename of CONFIG_MXC_UART_BASE to CFG_MXC_UART_BASE Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0613c36a |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_EXTRA_ENV_SETTINGS to CFG Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
54f80dd2 |
|
02-Dec-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_HOSTNAME et al to Kconfig This converts the following to Kconfig: CONFIG_GATEWAYIP CONFIG_HOSTNAME CONFIG_IPADDR CONFIG_NETMASK CONFIG_ROOTPATH CONFIG_SERVERIP CONFIG_UBOOTPATH To do this, we introduce a CONFIG_USE_ form of each of the above and change include/env_default.h to test for that to be set before setting a value. Further, we don't want to stringify the IP address related values as they are now properly strings via Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aec118eb |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
imx6/imx7: Remove now empty imx6_spl.h and imx7_spl.h There are now no flags being set in these files, so remove them. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
dd11fdc3 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_USB_FLAGS et al to CFG Perform simple renames of: CONFIG_MXC_USB_FLAGS to CFG_MXC_USB_FLAGS CONFIG_MXC_USB_PORT to CFG_MXC_USB_PORT CONFIG_MXC_USB_PORTSC to CFG_MXC_USB_PORTSC Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
4db38665 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_UART_BASE to CFG Perform a simple rename of CONFIG_MXC_UART_BASE to CFG_MXC_UART_BASE Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0613c36a |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_EXTRA_ENV_SETTINGS to CFG Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
54f80dd2 |
|
02-Dec-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_HOSTNAME et al to Kconfig This converts the following to Kconfig: CONFIG_GATEWAYIP CONFIG_HOSTNAME CONFIG_IPADDR CONFIG_NETMASK CONFIG_ROOTPATH CONFIG_SERVERIP CONFIG_UBOOTPATH To do this, we introduce a CONFIG_USE_ form of each of the above and change include/env_default.h to test for that to be set before setting a value. Further, we don't want to stringify the IP address related values as they are now properly strings via Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aec118eb |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
imx6/imx7: Remove now empty imx6_spl.h and imx7_spl.h There are now no flags being set in these files, so remove them. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
dd11fdc3 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_USB_FLAGS et al to CFG Perform simple renames of: CONFIG_MXC_USB_FLAGS to CFG_MXC_USB_FLAGS CONFIG_MXC_USB_PORT to CFG_MXC_USB_PORT CONFIG_MXC_USB_PORTSC to CFG_MXC_USB_PORTSC Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
4db38665 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_UART_BASE to CFG Perform a simple rename of CONFIG_MXC_UART_BASE to CFG_MXC_UART_BASE Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0613c36a |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_EXTRA_ENV_SETTINGS to CFG Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
54f80dd2 |
|
02-Dec-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_HOSTNAME et al to Kconfig This converts the following to Kconfig: CONFIG_GATEWAYIP CONFIG_HOSTNAME CONFIG_IPADDR CONFIG_NETMASK CONFIG_ROOTPATH CONFIG_SERVERIP CONFIG_UBOOTPATH To do this, we introduce a CONFIG_USE_ form of each of the above and change include/env_default.h to test for that to be set before setting a value. Further, we don't want to stringify the IP address related values as they are now properly strings via Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aec118eb |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
imx6/imx7: Remove now empty imx6_spl.h and imx7_spl.h There are now no flags being set in these files, so remove them. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
dd11fdc3 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_USB_FLAGS et al to CFG Perform simple renames of: CONFIG_MXC_USB_FLAGS to CFG_MXC_USB_FLAGS CONFIG_MXC_USB_PORT to CFG_MXC_USB_PORT CONFIG_MXC_USB_PORTSC to CFG_MXC_USB_PORTSC Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
4db38665 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_UART_BASE to CFG Perform a simple rename of CONFIG_MXC_UART_BASE to CFG_MXC_UART_BASE Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0613c36a |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_EXTRA_ENV_SETTINGS to CFG Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
54f80dd2 |
|
02-Dec-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_HOSTNAME et al to Kconfig This converts the following to Kconfig: CONFIG_GATEWAYIP CONFIG_HOSTNAME CONFIG_IPADDR CONFIG_NETMASK CONFIG_ROOTPATH CONFIG_SERVERIP CONFIG_UBOOTPATH To do this, we introduce a CONFIG_USE_ form of each of the above and change include/env_default.h to test for that to be set before setting a value. Further, we don't want to stringify the IP address related values as they are now properly strings via Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aec118eb |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
imx6/imx7: Remove now empty imx6_spl.h and imx7_spl.h There are now no flags being set in these files, so remove them. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
dd11fdc3 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_USB_FLAGS et al to CFG Perform simple renames of: CONFIG_MXC_USB_FLAGS to CFG_MXC_USB_FLAGS CONFIG_MXC_USB_PORT to CFG_MXC_USB_PORT CONFIG_MXC_USB_PORTSC to CFG_MXC_USB_PORTSC Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
4db38665 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_UART_BASE to CFG Perform a simple rename of CONFIG_MXC_UART_BASE to CFG_MXC_UART_BASE Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0613c36a |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_EXTRA_ENV_SETTINGS to CFG Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
54f80dd2 |
|
02-Dec-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_HOSTNAME et al to Kconfig This converts the following to Kconfig: CONFIG_GATEWAYIP CONFIG_HOSTNAME CONFIG_IPADDR CONFIG_NETMASK CONFIG_ROOTPATH CONFIG_SERVERIP CONFIG_UBOOTPATH To do this, we introduce a CONFIG_USE_ form of each of the above and change include/env_default.h to test for that to be set before setting a value. Further, we don't want to stringify the IP address related values as they are now properly strings via Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aec118eb |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
imx6/imx7: Remove now empty imx6_spl.h and imx7_spl.h There are now no flags being set in these files, so remove them. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
dd11fdc3 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_USB_FLAGS et al to CFG Perform simple renames of: CONFIG_MXC_USB_FLAGS to CFG_MXC_USB_FLAGS CONFIG_MXC_USB_PORT to CFG_MXC_USB_PORT CONFIG_MXC_USB_PORTSC to CFG_MXC_USB_PORTSC Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
4db38665 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_UART_BASE to CFG Perform a simple rename of CONFIG_MXC_UART_BASE to CFG_MXC_UART_BASE Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0613c36a |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_EXTRA_ENV_SETTINGS to CFG Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
54f80dd2 |
|
02-Dec-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_HOSTNAME et al to Kconfig This converts the following to Kconfig: CONFIG_GATEWAYIP CONFIG_HOSTNAME CONFIG_IPADDR CONFIG_NETMASK CONFIG_ROOTPATH CONFIG_SERVERIP CONFIG_UBOOTPATH To do this, we introduce a CONFIG_USE_ form of each of the above and change include/env_default.h to test for that to be set before setting a value. Further, we don't want to stringify the IP address related values as they are now properly strings via Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aec118eb |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
imx6/imx7: Remove now empty imx6_spl.h and imx7_spl.h There are now no flags being set in these files, so remove them. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
dd11fdc3 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_USB_FLAGS et al to CFG Perform simple renames of: CONFIG_MXC_USB_FLAGS to CFG_MXC_USB_FLAGS CONFIG_MXC_USB_PORT to CFG_MXC_USB_PORT CONFIG_MXC_USB_PORTSC to CFG_MXC_USB_PORTSC Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
4db38665 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_UART_BASE to CFG Perform a simple rename of CONFIG_MXC_UART_BASE to CFG_MXC_UART_BASE Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0613c36a |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_EXTRA_ENV_SETTINGS to CFG Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
54f80dd2 |
|
02-Dec-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_HOSTNAME et al to Kconfig This converts the following to Kconfig: CONFIG_GATEWAYIP CONFIG_HOSTNAME CONFIG_IPADDR CONFIG_NETMASK CONFIG_ROOTPATH CONFIG_SERVERIP CONFIG_UBOOTPATH To do this, we introduce a CONFIG_USE_ form of each of the above and change include/env_default.h to test for that to be set before setting a value. Further, we don't want to stringify the IP address related values as they are now properly strings via Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aec118eb |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
imx6/imx7: Remove now empty imx6_spl.h and imx7_spl.h There are now no flags being set in these files, so remove them. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
dd11fdc3 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_USB_FLAGS et al to CFG Perform simple renames of: CONFIG_MXC_USB_FLAGS to CFG_MXC_USB_FLAGS CONFIG_MXC_USB_PORT to CFG_MXC_USB_PORT CONFIG_MXC_USB_PORTSC to CFG_MXC_USB_PORTSC Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
4db38665 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_UART_BASE to CFG Perform a simple rename of CONFIG_MXC_UART_BASE to CFG_MXC_UART_BASE Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0613c36a |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_EXTRA_ENV_SETTINGS to CFG Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
54f80dd2 |
|
02-Dec-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_HOSTNAME et al to Kconfig This converts the following to Kconfig: CONFIG_GATEWAYIP CONFIG_HOSTNAME CONFIG_IPADDR CONFIG_NETMASK CONFIG_ROOTPATH CONFIG_SERVERIP CONFIG_UBOOTPATH To do this, we introduce a CONFIG_USE_ form of each of the above and change include/env_default.h to test for that to be set before setting a value. Further, we don't want to stringify the IP address related values as they are now properly strings via Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aec118eb |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
imx6/imx7: Remove now empty imx6_spl.h and imx7_spl.h There are now no flags being set in these files, so remove them. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
dd11fdc3 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_USB_FLAGS et al to CFG Perform simple renames of: CONFIG_MXC_USB_FLAGS to CFG_MXC_USB_FLAGS CONFIG_MXC_USB_PORT to CFG_MXC_USB_PORT CONFIG_MXC_USB_PORTSC to CFG_MXC_USB_PORTSC Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
4db38665 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_UART_BASE to CFG Perform a simple rename of CONFIG_MXC_UART_BASE to CFG_MXC_UART_BASE Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0613c36a |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_EXTRA_ENV_SETTINGS to CFG Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
54f80dd2 |
|
02-Dec-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_HOSTNAME et al to Kconfig This converts the following to Kconfig: CONFIG_GATEWAYIP CONFIG_HOSTNAME CONFIG_IPADDR CONFIG_NETMASK CONFIG_ROOTPATH CONFIG_SERVERIP CONFIG_UBOOTPATH To do this, we introduce a CONFIG_USE_ form of each of the above and change include/env_default.h to test for that to be set before setting a value. Further, we don't want to stringify the IP address related values as they are now properly strings via Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aec118eb |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
imx6/imx7: Remove now empty imx6_spl.h and imx7_spl.h There are now no flags being set in these files, so remove them. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
dd11fdc3 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_USB_FLAGS et al to CFG Perform simple renames of: CONFIG_MXC_USB_FLAGS to CFG_MXC_USB_FLAGS CONFIG_MXC_USB_PORT to CFG_MXC_USB_PORT CONFIG_MXC_USB_PORTSC to CFG_MXC_USB_PORTSC Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
4db38665 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_UART_BASE to CFG Perform a simple rename of CONFIG_MXC_UART_BASE to CFG_MXC_UART_BASE Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0613c36a |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_EXTRA_ENV_SETTINGS to CFG Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
54f80dd2 |
|
02-Dec-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_HOSTNAME et al to Kconfig This converts the following to Kconfig: CONFIG_GATEWAYIP CONFIG_HOSTNAME CONFIG_IPADDR CONFIG_NETMASK CONFIG_ROOTPATH CONFIG_SERVERIP CONFIG_UBOOTPATH To do this, we introduce a CONFIG_USE_ form of each of the above and change include/env_default.h to test for that to be set before setting a value. Further, we don't want to stringify the IP address related values as they are now properly strings via Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aec118eb |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
imx6/imx7: Remove now empty imx6_spl.h and imx7_spl.h There are now no flags being set in these files, so remove them. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
dd11fdc3 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_USB_FLAGS et al to CFG Perform simple renames of: CONFIG_MXC_USB_FLAGS to CFG_MXC_USB_FLAGS CONFIG_MXC_USB_PORT to CFG_MXC_USB_PORT CONFIG_MXC_USB_PORTSC to CFG_MXC_USB_PORTSC Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
4db38665 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_UART_BASE to CFG Perform a simple rename of CONFIG_MXC_UART_BASE to CFG_MXC_UART_BASE Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0613c36a |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_EXTRA_ENV_SETTINGS to CFG Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
54f80dd2 |
|
02-Dec-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_HOSTNAME et al to Kconfig This converts the following to Kconfig: CONFIG_GATEWAYIP CONFIG_HOSTNAME CONFIG_IPADDR CONFIG_NETMASK CONFIG_ROOTPATH CONFIG_SERVERIP CONFIG_UBOOTPATH To do this, we introduce a CONFIG_USE_ form of each of the above and change include/env_default.h to test for that to be set before setting a value. Further, we don't want to stringify the IP address related values as they are now properly strings via Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aec118eb |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
imx6/imx7: Remove now empty imx6_spl.h and imx7_spl.h There are now no flags being set in these files, so remove them. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
dd11fdc3 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_USB_FLAGS et al to CFG Perform simple renames of: CONFIG_MXC_USB_FLAGS to CFG_MXC_USB_FLAGS CONFIG_MXC_USB_PORT to CFG_MXC_USB_PORT CONFIG_MXC_USB_PORTSC to CFG_MXC_USB_PORTSC Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
4db38665 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_UART_BASE to CFG Perform a simple rename of CONFIG_MXC_UART_BASE to CFG_MXC_UART_BASE Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0613c36a |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_EXTRA_ENV_SETTINGS to CFG Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
54f80dd2 |
|
02-Dec-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_HOSTNAME et al to Kconfig This converts the following to Kconfig: CONFIG_GATEWAYIP CONFIG_HOSTNAME CONFIG_IPADDR CONFIG_NETMASK CONFIG_ROOTPATH CONFIG_SERVERIP CONFIG_UBOOTPATH To do this, we introduce a CONFIG_USE_ form of each of the above and change include/env_default.h to test for that to be set before setting a value. Further, we don't want to stringify the IP address related values as they are now properly strings via Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aec118eb |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
imx6/imx7: Remove now empty imx6_spl.h and imx7_spl.h There are now no flags being set in these files, so remove them. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
dd11fdc3 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_USB_FLAGS et al to CFG Perform simple renames of: CONFIG_MXC_USB_FLAGS to CFG_MXC_USB_FLAGS CONFIG_MXC_USB_PORT to CFG_MXC_USB_PORT CONFIG_MXC_USB_PORTSC to CFG_MXC_USB_PORTSC Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
4db38665 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_UART_BASE to CFG Perform a simple rename of CONFIG_MXC_UART_BASE to CFG_MXC_UART_BASE Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0613c36a |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_EXTRA_ENV_SETTINGS to CFG Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
54f80dd2 |
|
02-Dec-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_HOSTNAME et al to Kconfig This converts the following to Kconfig: CONFIG_GATEWAYIP CONFIG_HOSTNAME CONFIG_IPADDR CONFIG_NETMASK CONFIG_ROOTPATH CONFIG_SERVERIP CONFIG_UBOOTPATH To do this, we introduce a CONFIG_USE_ form of each of the above and change include/env_default.h to test for that to be set before setting a value. Further, we don't want to stringify the IP address related values as they are now properly strings via Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aec118eb |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
imx6/imx7: Remove now empty imx6_spl.h and imx7_spl.h There are now no flags being set in these files, so remove them. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
dd11fdc3 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_USB_FLAGS et al to CFG Perform simple renames of: CONFIG_MXC_USB_FLAGS to CFG_MXC_USB_FLAGS CONFIG_MXC_USB_PORT to CFG_MXC_USB_PORT CONFIG_MXC_USB_PORTSC to CFG_MXC_USB_PORTSC Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
4db38665 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_UART_BASE to CFG Perform a simple rename of CONFIG_MXC_UART_BASE to CFG_MXC_UART_BASE Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0613c36a |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_EXTRA_ENV_SETTINGS to CFG Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
54f80dd2 |
|
02-Dec-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_HOSTNAME et al to Kconfig This converts the following to Kconfig: CONFIG_GATEWAYIP CONFIG_HOSTNAME CONFIG_IPADDR CONFIG_NETMASK CONFIG_ROOTPATH CONFIG_SERVERIP CONFIG_UBOOTPATH To do this, we introduce a CONFIG_USE_ form of each of the above and change include/env_default.h to test for that to be set before setting a value. Further, we don't want to stringify the IP address related values as they are now properly strings via Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aec118eb |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
imx6/imx7: Remove now empty imx6_spl.h and imx7_spl.h There are now no flags being set in these files, so remove them. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
dd11fdc3 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_USB_FLAGS et al to CFG Perform simple renames of: CONFIG_MXC_USB_FLAGS to CFG_MXC_USB_FLAGS CONFIG_MXC_USB_PORT to CFG_MXC_USB_PORT CONFIG_MXC_USB_PORTSC to CFG_MXC_USB_PORTSC Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
4db38665 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_UART_BASE to CFG Perform a simple rename of CONFIG_MXC_UART_BASE to CFG_MXC_UART_BASE Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0613c36a |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_EXTRA_ENV_SETTINGS to CFG Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
54f80dd2 |
|
02-Dec-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_HOSTNAME et al to Kconfig This converts the following to Kconfig: CONFIG_GATEWAYIP CONFIG_HOSTNAME CONFIG_IPADDR CONFIG_NETMASK CONFIG_ROOTPATH CONFIG_SERVERIP CONFIG_UBOOTPATH To do this, we introduce a CONFIG_USE_ form of each of the above and change include/env_default.h to test for that to be set before setting a value. Further, we don't want to stringify the IP address related values as they are now properly strings via Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aec118eb |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
imx6/imx7: Remove now empty imx6_spl.h and imx7_spl.h There are now no flags being set in these files, so remove them. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
dd11fdc3 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_USB_FLAGS et al to CFG Perform simple renames of: CONFIG_MXC_USB_FLAGS to CFG_MXC_USB_FLAGS CONFIG_MXC_USB_PORT to CFG_MXC_USB_PORT CONFIG_MXC_USB_PORTSC to CFG_MXC_USB_PORTSC Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
4db38665 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_UART_BASE to CFG Perform a simple rename of CONFIG_MXC_UART_BASE to CFG_MXC_UART_BASE Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0613c36a |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_EXTRA_ENV_SETTINGS to CFG Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
54f80dd2 |
|
02-Dec-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_HOSTNAME et al to Kconfig This converts the following to Kconfig: CONFIG_GATEWAYIP CONFIG_HOSTNAME CONFIG_IPADDR CONFIG_NETMASK CONFIG_ROOTPATH CONFIG_SERVERIP CONFIG_UBOOTPATH To do this, we introduce a CONFIG_USE_ form of each of the above and change include/env_default.h to test for that to be set before setting a value. Further, we don't want to stringify the IP address related values as they are now properly strings via Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aec118eb |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
imx6/imx7: Remove now empty imx6_spl.h and imx7_spl.h There are now no flags being set in these files, so remove them. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
dd11fdc3 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_USB_FLAGS et al to CFG Perform simple renames of: CONFIG_MXC_USB_FLAGS to CFG_MXC_USB_FLAGS CONFIG_MXC_USB_PORT to CFG_MXC_USB_PORT CONFIG_MXC_USB_PORTSC to CFG_MXC_USB_PORTSC Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
4db38665 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_UART_BASE to CFG Perform a simple rename of CONFIG_MXC_UART_BASE to CFG_MXC_UART_BASE Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0613c36a |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_EXTRA_ENV_SETTINGS to CFG Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
54f80dd2 |
|
02-Dec-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_HOSTNAME et al to Kconfig This converts the following to Kconfig: CONFIG_GATEWAYIP CONFIG_HOSTNAME CONFIG_IPADDR CONFIG_NETMASK CONFIG_ROOTPATH CONFIG_SERVERIP CONFIG_UBOOTPATH To do this, we introduce a CONFIG_USE_ form of each of the above and change include/env_default.h to test for that to be set before setting a value. Further, we don't want to stringify the IP address related values as they are now properly strings via Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aec118eb |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
imx6/imx7: Remove now empty imx6_spl.h and imx7_spl.h There are now no flags being set in these files, so remove them. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
dd11fdc3 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_USB_FLAGS et al to CFG Perform simple renames of: CONFIG_MXC_USB_FLAGS to CFG_MXC_USB_FLAGS CONFIG_MXC_USB_PORT to CFG_MXC_USB_PORT CONFIG_MXC_USB_PORTSC to CFG_MXC_USB_PORTSC Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
4db38665 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_UART_BASE to CFG Perform a simple rename of CONFIG_MXC_UART_BASE to CFG_MXC_UART_BASE Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0613c36a |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_EXTRA_ENV_SETTINGS to CFG Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
54f80dd2 |
|
02-Dec-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_HOSTNAME et al to Kconfig This converts the following to Kconfig: CONFIG_GATEWAYIP CONFIG_HOSTNAME CONFIG_IPADDR CONFIG_NETMASK CONFIG_ROOTPATH CONFIG_SERVERIP CONFIG_UBOOTPATH To do this, we introduce a CONFIG_USE_ form of each of the above and change include/env_default.h to test for that to be set before setting a value. Further, we don't want to stringify the IP address related values as they are now properly strings via Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aec118eb |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
imx6/imx7: Remove now empty imx6_spl.h and imx7_spl.h There are now no flags being set in these files, so remove them. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
dd11fdc3 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_USB_FLAGS et al to CFG Perform simple renames of: CONFIG_MXC_USB_FLAGS to CFG_MXC_USB_FLAGS CONFIG_MXC_USB_PORT to CFG_MXC_USB_PORT CONFIG_MXC_USB_PORTSC to CFG_MXC_USB_PORTSC Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
4db38665 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_UART_BASE to CFG Perform a simple rename of CONFIG_MXC_UART_BASE to CFG_MXC_UART_BASE Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0613c36a |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_EXTRA_ENV_SETTINGS to CFG Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
54f80dd2 |
|
02-Dec-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_HOSTNAME et al to Kconfig This converts the following to Kconfig: CONFIG_GATEWAYIP CONFIG_HOSTNAME CONFIG_IPADDR CONFIG_NETMASK CONFIG_ROOTPATH CONFIG_SERVERIP CONFIG_UBOOTPATH To do this, we introduce a CONFIG_USE_ form of each of the above and change include/env_default.h to test for that to be set before setting a value. Further, we don't want to stringify the IP address related values as they are now properly strings via Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aec118eb |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
imx6/imx7: Remove now empty imx6_spl.h and imx7_spl.h There are now no flags being set in these files, so remove them. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
dd11fdc3 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_USB_FLAGS et al to CFG Perform simple renames of: CONFIG_MXC_USB_FLAGS to CFG_MXC_USB_FLAGS CONFIG_MXC_USB_PORT to CFG_MXC_USB_PORT CONFIG_MXC_USB_PORTSC to CFG_MXC_USB_PORTSC Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
4db38665 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_UART_BASE to CFG Perform a simple rename of CONFIG_MXC_UART_BASE to CFG_MXC_UART_BASE Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0613c36a |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_EXTRA_ENV_SETTINGS to CFG Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
54f80dd2 |
|
02-Dec-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_HOSTNAME et al to Kconfig This converts the following to Kconfig: CONFIG_GATEWAYIP CONFIG_HOSTNAME CONFIG_IPADDR CONFIG_NETMASK CONFIG_ROOTPATH CONFIG_SERVERIP CONFIG_UBOOTPATH To do this, we introduce a CONFIG_USE_ form of each of the above and change include/env_default.h to test for that to be set before setting a value. Further, we don't want to stringify the IP address related values as they are now properly strings via Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aec118eb |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
imx6/imx7: Remove now empty imx6_spl.h and imx7_spl.h There are now no flags being set in these files, so remove them. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
dd11fdc3 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_USB_FLAGS et al to CFG Perform simple renames of: CONFIG_MXC_USB_FLAGS to CFG_MXC_USB_FLAGS CONFIG_MXC_USB_PORT to CFG_MXC_USB_PORT CONFIG_MXC_USB_PORTSC to CFG_MXC_USB_PORTSC Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
4db38665 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_UART_BASE to CFG Perform a simple rename of CONFIG_MXC_UART_BASE to CFG_MXC_UART_BASE Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0613c36a |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_EXTRA_ENV_SETTINGS to CFG Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
54f80dd2 |
|
02-Dec-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_HOSTNAME et al to Kconfig This converts the following to Kconfig: CONFIG_GATEWAYIP CONFIG_HOSTNAME CONFIG_IPADDR CONFIG_NETMASK CONFIG_ROOTPATH CONFIG_SERVERIP CONFIG_UBOOTPATH To do this, we introduce a CONFIG_USE_ form of each of the above and change include/env_default.h to test for that to be set before setting a value. Further, we don't want to stringify the IP address related values as they are now properly strings via Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aec118eb |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
imx6/imx7: Remove now empty imx6_spl.h and imx7_spl.h There are now no flags being set in these files, so remove them. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
dd11fdc3 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_USB_FLAGS et al to CFG Perform simple renames of: CONFIG_MXC_USB_FLAGS to CFG_MXC_USB_FLAGS CONFIG_MXC_USB_PORT to CFG_MXC_USB_PORT CONFIG_MXC_USB_PORTSC to CFG_MXC_USB_PORTSC Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
4db38665 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_UART_BASE to CFG Perform a simple rename of CONFIG_MXC_UART_BASE to CFG_MXC_UART_BASE Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0613c36a |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_EXTRA_ENV_SETTINGS to CFG Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
54f80dd2 |
|
02-Dec-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_HOSTNAME et al to Kconfig This converts the following to Kconfig: CONFIG_GATEWAYIP CONFIG_HOSTNAME CONFIG_IPADDR CONFIG_NETMASK CONFIG_ROOTPATH CONFIG_SERVERIP CONFIG_UBOOTPATH To do this, we introduce a CONFIG_USE_ form of each of the above and change include/env_default.h to test for that to be set before setting a value. Further, we don't want to stringify the IP address related values as they are now properly strings via Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aec118eb |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
imx6/imx7: Remove now empty imx6_spl.h and imx7_spl.h There are now no flags being set in these files, so remove them. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
dd11fdc3 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_USB_FLAGS et al to CFG Perform simple renames of: CONFIG_MXC_USB_FLAGS to CFG_MXC_USB_FLAGS CONFIG_MXC_USB_PORT to CFG_MXC_USB_PORT CONFIG_MXC_USB_PORTSC to CFG_MXC_USB_PORTSC Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
4db38665 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_UART_BASE to CFG Perform a simple rename of CONFIG_MXC_UART_BASE to CFG_MXC_UART_BASE Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0613c36a |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_EXTRA_ENV_SETTINGS to CFG Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
54f80dd2 |
|
02-Dec-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_HOSTNAME et al to Kconfig This converts the following to Kconfig: CONFIG_GATEWAYIP CONFIG_HOSTNAME CONFIG_IPADDR CONFIG_NETMASK CONFIG_ROOTPATH CONFIG_SERVERIP CONFIG_UBOOTPATH To do this, we introduce a CONFIG_USE_ form of each of the above and change include/env_default.h to test for that to be set before setting a value. Further, we don't want to stringify the IP address related values as they are now properly strings via Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aec118eb |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
imx6/imx7: Remove now empty imx6_spl.h and imx7_spl.h There are now no flags being set in these files, so remove them. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
dd11fdc3 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_USB_FLAGS et al to CFG Perform simple renames of: CONFIG_MXC_USB_FLAGS to CFG_MXC_USB_FLAGS CONFIG_MXC_USB_PORT to CFG_MXC_USB_PORT CONFIG_MXC_USB_PORTSC to CFG_MXC_USB_PORTSC Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
4db38665 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_UART_BASE to CFG Perform a simple rename of CONFIG_MXC_UART_BASE to CFG_MXC_UART_BASE Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0613c36a |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_EXTRA_ENV_SETTINGS to CFG Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
54f80dd2 |
|
02-Dec-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_HOSTNAME et al to Kconfig This converts the following to Kconfig: CONFIG_GATEWAYIP CONFIG_HOSTNAME CONFIG_IPADDR CONFIG_NETMASK CONFIG_ROOTPATH CONFIG_SERVERIP CONFIG_UBOOTPATH To do this, we introduce a CONFIG_USE_ form of each of the above and change include/env_default.h to test for that to be set before setting a value. Further, we don't want to stringify the IP address related values as they are now properly strings via Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aec118eb |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
imx6/imx7: Remove now empty imx6_spl.h and imx7_spl.h There are now no flags being set in these files, so remove them. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
dd11fdc3 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_USB_FLAGS et al to CFG Perform simple renames of: CONFIG_MXC_USB_FLAGS to CFG_MXC_USB_FLAGS CONFIG_MXC_USB_PORT to CFG_MXC_USB_PORT CONFIG_MXC_USB_PORTSC to CFG_MXC_USB_PORTSC Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
4db38665 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_UART_BASE to CFG Perform a simple rename of CONFIG_MXC_UART_BASE to CFG_MXC_UART_BASE Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0613c36a |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_EXTRA_ENV_SETTINGS to CFG Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
54f80dd2 |
|
02-Dec-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_HOSTNAME et al to Kconfig This converts the following to Kconfig: CONFIG_GATEWAYIP CONFIG_HOSTNAME CONFIG_IPADDR CONFIG_NETMASK CONFIG_ROOTPATH CONFIG_SERVERIP CONFIG_UBOOTPATH To do this, we introduce a CONFIG_USE_ form of each of the above and change include/env_default.h to test for that to be set before setting a value. Further, we don't want to stringify the IP address related values as they are now properly strings via Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aec118eb |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
imx6/imx7: Remove now empty imx6_spl.h and imx7_spl.h There are now no flags being set in these files, so remove them. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
dd11fdc3 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_USB_FLAGS et al to CFG Perform simple renames of: CONFIG_MXC_USB_FLAGS to CFG_MXC_USB_FLAGS CONFIG_MXC_USB_PORT to CFG_MXC_USB_PORT CONFIG_MXC_USB_PORTSC to CFG_MXC_USB_PORTSC Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
4db38665 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_UART_BASE to CFG Perform a simple rename of CONFIG_MXC_UART_BASE to CFG_MXC_UART_BASE Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0613c36a |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_EXTRA_ENV_SETTINGS to CFG Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
54f80dd2 |
|
02-Dec-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_HOSTNAME et al to Kconfig This converts the following to Kconfig: CONFIG_GATEWAYIP CONFIG_HOSTNAME CONFIG_IPADDR CONFIG_NETMASK CONFIG_ROOTPATH CONFIG_SERVERIP CONFIG_UBOOTPATH To do this, we introduce a CONFIG_USE_ form of each of the above and change include/env_default.h to test for that to be set before setting a value. Further, we don't want to stringify the IP address related values as they are now properly strings via Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aec118eb |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
imx6/imx7: Remove now empty imx6_spl.h and imx7_spl.h There are now no flags being set in these files, so remove them. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
dd11fdc3 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_USB_FLAGS et al to CFG Perform simple renames of: CONFIG_MXC_USB_FLAGS to CFG_MXC_USB_FLAGS CONFIG_MXC_USB_PORT to CFG_MXC_USB_PORT CONFIG_MXC_USB_PORTSC to CFG_MXC_USB_PORTSC Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
4db38665 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_UART_BASE to CFG Perform a simple rename of CONFIG_MXC_UART_BASE to CFG_MXC_UART_BASE Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0613c36a |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_EXTRA_ENV_SETTINGS to CFG Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
54f80dd2 |
|
02-Dec-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_HOSTNAME et al to Kconfig This converts the following to Kconfig: CONFIG_GATEWAYIP CONFIG_HOSTNAME CONFIG_IPADDR CONFIG_NETMASK CONFIG_ROOTPATH CONFIG_SERVERIP CONFIG_UBOOTPATH To do this, we introduce a CONFIG_USE_ form of each of the above and change include/env_default.h to test for that to be set before setting a value. Further, we don't want to stringify the IP address related values as they are now properly strings via Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aec118eb |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
imx6/imx7: Remove now empty imx6_spl.h and imx7_spl.h There are now no flags being set in these files, so remove them. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
dd11fdc3 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_USB_FLAGS et al to CFG Perform simple renames of: CONFIG_MXC_USB_FLAGS to CFG_MXC_USB_FLAGS CONFIG_MXC_USB_PORT to CFG_MXC_USB_PORT CONFIG_MXC_USB_PORTSC to CFG_MXC_USB_PORTSC Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
4db38665 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_UART_BASE to CFG Perform a simple rename of CONFIG_MXC_UART_BASE to CFG_MXC_UART_BASE Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0613c36a |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_EXTRA_ENV_SETTINGS to CFG Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
54f80dd2 |
|
02-Dec-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_HOSTNAME et al to Kconfig This converts the following to Kconfig: CONFIG_GATEWAYIP CONFIG_HOSTNAME CONFIG_IPADDR CONFIG_NETMASK CONFIG_ROOTPATH CONFIG_SERVERIP CONFIG_UBOOTPATH To do this, we introduce a CONFIG_USE_ form of each of the above and change include/env_default.h to test for that to be set before setting a value. Further, we don't want to stringify the IP address related values as they are now properly strings via Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aec118eb |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
imx6/imx7: Remove now empty imx6_spl.h and imx7_spl.h There are now no flags being set in these files, so remove them. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
dd11fdc3 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_USB_FLAGS et al to CFG Perform simple renames of: CONFIG_MXC_USB_FLAGS to CFG_MXC_USB_FLAGS CONFIG_MXC_USB_PORT to CFG_MXC_USB_PORT CONFIG_MXC_USB_PORTSC to CFG_MXC_USB_PORTSC Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
4db38665 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_UART_BASE to CFG Perform a simple rename of CONFIG_MXC_UART_BASE to CFG_MXC_UART_BASE Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0613c36a |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_EXTRA_ENV_SETTINGS to CFG Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
54f80dd2 |
|
02-Dec-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_HOSTNAME et al to Kconfig This converts the following to Kconfig: CONFIG_GATEWAYIP CONFIG_HOSTNAME CONFIG_IPADDR CONFIG_NETMASK CONFIG_ROOTPATH CONFIG_SERVERIP CONFIG_UBOOTPATH To do this, we introduce a CONFIG_USE_ form of each of the above and change include/env_default.h to test for that to be set before setting a value. Further, we don't want to stringify the IP address related values as they are now properly strings via Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aec118eb |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
imx6/imx7: Remove now empty imx6_spl.h and imx7_spl.h There are now no flags being set in these files, so remove them. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
dd11fdc3 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_USB_FLAGS et al to CFG Perform simple renames of: CONFIG_MXC_USB_FLAGS to CFG_MXC_USB_FLAGS CONFIG_MXC_USB_PORT to CFG_MXC_USB_PORT CONFIG_MXC_USB_PORTSC to CFG_MXC_USB_PORTSC Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
4db38665 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_UART_BASE to CFG Perform a simple rename of CONFIG_MXC_UART_BASE to CFG_MXC_UART_BASE Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0613c36a |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_EXTRA_ENV_SETTINGS to CFG Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
54f80dd2 |
|
02-Dec-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_HOSTNAME et al to Kconfig This converts the following to Kconfig: CONFIG_GATEWAYIP CONFIG_HOSTNAME CONFIG_IPADDR CONFIG_NETMASK CONFIG_ROOTPATH CONFIG_SERVERIP CONFIG_UBOOTPATH To do this, we introduce a CONFIG_USE_ form of each of the above and change include/env_default.h to test for that to be set before setting a value. Further, we don't want to stringify the IP address related values as they are now properly strings via Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aec118eb |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
imx6/imx7: Remove now empty imx6_spl.h and imx7_spl.h There are now no flags being set in these files, so remove them. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
dd11fdc3 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_USB_FLAGS et al to CFG Perform simple renames of: CONFIG_MXC_USB_FLAGS to CFG_MXC_USB_FLAGS CONFIG_MXC_USB_PORT to CFG_MXC_USB_PORT CONFIG_MXC_USB_PORTSC to CFG_MXC_USB_PORTSC Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
4db38665 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_UART_BASE to CFG Perform a simple rename of CONFIG_MXC_UART_BASE to CFG_MXC_UART_BASE Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0613c36a |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_EXTRA_ENV_SETTINGS to CFG Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
54f80dd2 |
|
02-Dec-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_HOSTNAME et al to Kconfig This converts the following to Kconfig: CONFIG_GATEWAYIP CONFIG_HOSTNAME CONFIG_IPADDR CONFIG_NETMASK CONFIG_ROOTPATH CONFIG_SERVERIP CONFIG_UBOOTPATH To do this, we introduce a CONFIG_USE_ form of each of the above and change include/env_default.h to test for that to be set before setting a value. Further, we don't want to stringify the IP address related values as they are now properly strings via Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aec118eb |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
imx6/imx7: Remove now empty imx6_spl.h and imx7_spl.h There are now no flags being set in these files, so remove them. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
dd11fdc3 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_USB_FLAGS et al to CFG Perform simple renames of: CONFIG_MXC_USB_FLAGS to CFG_MXC_USB_FLAGS CONFIG_MXC_USB_PORT to CFG_MXC_USB_PORT CONFIG_MXC_USB_PORTSC to CFG_MXC_USB_PORTSC Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
4db38665 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_UART_BASE to CFG Perform a simple rename of CONFIG_MXC_UART_BASE to CFG_MXC_UART_BASE Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0613c36a |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_EXTRA_ENV_SETTINGS to CFG Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
54f80dd2 |
|
02-Dec-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_HOSTNAME et al to Kconfig This converts the following to Kconfig: CONFIG_GATEWAYIP CONFIG_HOSTNAME CONFIG_IPADDR CONFIG_NETMASK CONFIG_ROOTPATH CONFIG_SERVERIP CONFIG_UBOOTPATH To do this, we introduce a CONFIG_USE_ form of each of the above and change include/env_default.h to test for that to be set before setting a value. Further, we don't want to stringify the IP address related values as they are now properly strings via Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aec118eb |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
imx6/imx7: Remove now empty imx6_spl.h and imx7_spl.h There are now no flags being set in these files, so remove them. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
dd11fdc3 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_USB_FLAGS et al to CFG Perform simple renames of: CONFIG_MXC_USB_FLAGS to CFG_MXC_USB_FLAGS CONFIG_MXC_USB_PORT to CFG_MXC_USB_PORT CONFIG_MXC_USB_PORTSC to CFG_MXC_USB_PORTSC Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
4db38665 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_UART_BASE to CFG Perform a simple rename of CONFIG_MXC_UART_BASE to CFG_MXC_UART_BASE Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0613c36a |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_EXTRA_ENV_SETTINGS to CFG Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
54f80dd2 |
|
02-Dec-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_HOSTNAME et al to Kconfig This converts the following to Kconfig: CONFIG_GATEWAYIP CONFIG_HOSTNAME CONFIG_IPADDR CONFIG_NETMASK CONFIG_ROOTPATH CONFIG_SERVERIP CONFIG_UBOOTPATH To do this, we introduce a CONFIG_USE_ form of each of the above and change include/env_default.h to test for that to be set before setting a value. Further, we don't want to stringify the IP address related values as they are now properly strings via Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aec118eb |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
imx6/imx7: Remove now empty imx6_spl.h and imx7_spl.h There are now no flags being set in these files, so remove them. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
dd11fdc3 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_USB_FLAGS et al to CFG Perform simple renames of: CONFIG_MXC_USB_FLAGS to CFG_MXC_USB_FLAGS CONFIG_MXC_USB_PORT to CFG_MXC_USB_PORT CONFIG_MXC_USB_PORTSC to CFG_MXC_USB_PORTSC Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
4db38665 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_UART_BASE to CFG Perform a simple rename of CONFIG_MXC_UART_BASE to CFG_MXC_UART_BASE Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0613c36a |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_EXTRA_ENV_SETTINGS to CFG Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
54f80dd2 |
|
02-Dec-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_HOSTNAME et al to Kconfig This converts the following to Kconfig: CONFIG_GATEWAYIP CONFIG_HOSTNAME CONFIG_IPADDR CONFIG_NETMASK CONFIG_ROOTPATH CONFIG_SERVERIP CONFIG_UBOOTPATH To do this, we introduce a CONFIG_USE_ form of each of the above and change include/env_default.h to test for that to be set before setting a value. Further, we don't want to stringify the IP address related values as they are now properly strings via Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aec118eb |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
imx6/imx7: Remove now empty imx6_spl.h and imx7_spl.h There are now no flags being set in these files, so remove them. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
dd11fdc3 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_USB_FLAGS et al to CFG Perform simple renames of: CONFIG_MXC_USB_FLAGS to CFG_MXC_USB_FLAGS CONFIG_MXC_USB_PORT to CFG_MXC_USB_PORT CONFIG_MXC_USB_PORTSC to CFG_MXC_USB_PORTSC Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
4db38665 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_UART_BASE to CFG Perform a simple rename of CONFIG_MXC_UART_BASE to CFG_MXC_UART_BASE Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0613c36a |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_EXTRA_ENV_SETTINGS to CFG Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
54f80dd2 |
|
02-Dec-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_HOSTNAME et al to Kconfig This converts the following to Kconfig: CONFIG_GATEWAYIP CONFIG_HOSTNAME CONFIG_IPADDR CONFIG_NETMASK CONFIG_ROOTPATH CONFIG_SERVERIP CONFIG_UBOOTPATH To do this, we introduce a CONFIG_USE_ form of each of the above and change include/env_default.h to test for that to be set before setting a value. Further, we don't want to stringify the IP address related values as they are now properly strings via Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aec118eb |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
imx6/imx7: Remove now empty imx6_spl.h and imx7_spl.h There are now no flags being set in these files, so remove them. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
dd11fdc3 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_USB_FLAGS et al to CFG Perform simple renames of: CONFIG_MXC_USB_FLAGS to CFG_MXC_USB_FLAGS CONFIG_MXC_USB_PORT to CFG_MXC_USB_PORT CONFIG_MXC_USB_PORTSC to CFG_MXC_USB_PORTSC Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
4db38665 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_UART_BASE to CFG Perform a simple rename of CONFIG_MXC_UART_BASE to CFG_MXC_UART_BASE Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0613c36a |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_EXTRA_ENV_SETTINGS to CFG Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
54f80dd2 |
|
02-Dec-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_HOSTNAME et al to Kconfig This converts the following to Kconfig: CONFIG_GATEWAYIP CONFIG_HOSTNAME CONFIG_IPADDR CONFIG_NETMASK CONFIG_ROOTPATH CONFIG_SERVERIP CONFIG_UBOOTPATH To do this, we introduce a CONFIG_USE_ form of each of the above and change include/env_default.h to test for that to be set before setting a value. Further, we don't want to stringify the IP address related values as they are now properly strings via Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aec118eb |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
imx6/imx7: Remove now empty imx6_spl.h and imx7_spl.h There are now no flags being set in these files, so remove them. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
dd11fdc3 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_USB_FLAGS et al to CFG Perform simple renames of: CONFIG_MXC_USB_FLAGS to CFG_MXC_USB_FLAGS CONFIG_MXC_USB_PORT to CFG_MXC_USB_PORT CONFIG_MXC_USB_PORTSC to CFG_MXC_USB_PORTSC Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
4db38665 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_UART_BASE to CFG Perform a simple rename of CONFIG_MXC_UART_BASE to CFG_MXC_UART_BASE Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0613c36a |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_EXTRA_ENV_SETTINGS to CFG Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
54f80dd2 |
|
02-Dec-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_HOSTNAME et al to Kconfig This converts the following to Kconfig: CONFIG_GATEWAYIP CONFIG_HOSTNAME CONFIG_IPADDR CONFIG_NETMASK CONFIG_ROOTPATH CONFIG_SERVERIP CONFIG_UBOOTPATH To do this, we introduce a CONFIG_USE_ form of each of the above and change include/env_default.h to test for that to be set before setting a value. Further, we don't want to stringify the IP address related values as they are now properly strings via Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aec118eb |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
imx6/imx7: Remove now empty imx6_spl.h and imx7_spl.h There are now no flags being set in these files, so remove them. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
dd11fdc3 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_USB_FLAGS et al to CFG Perform simple renames of: CONFIG_MXC_USB_FLAGS to CFG_MXC_USB_FLAGS CONFIG_MXC_USB_PORT to CFG_MXC_USB_PORT CONFIG_MXC_USB_PORTSC to CFG_MXC_USB_PORTSC Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
4db38665 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_UART_BASE to CFG Perform a simple rename of CONFIG_MXC_UART_BASE to CFG_MXC_UART_BASE Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0613c36a |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_EXTRA_ENV_SETTINGS to CFG Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
54f80dd2 |
|
02-Dec-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_HOSTNAME et al to Kconfig This converts the following to Kconfig: CONFIG_GATEWAYIP CONFIG_HOSTNAME CONFIG_IPADDR CONFIG_NETMASK CONFIG_ROOTPATH CONFIG_SERVERIP CONFIG_UBOOTPATH To do this, we introduce a CONFIG_USE_ form of each of the above and change include/env_default.h to test for that to be set before setting a value. Further, we don't want to stringify the IP address related values as they are now properly strings via Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aec118eb |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
imx6/imx7: Remove now empty imx6_spl.h and imx7_spl.h There are now no flags being set in these files, so remove them. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
dd11fdc3 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_USB_FLAGS et al to CFG Perform simple renames of: CONFIG_MXC_USB_FLAGS to CFG_MXC_USB_FLAGS CONFIG_MXC_USB_PORT to CFG_MXC_USB_PORT CONFIG_MXC_USB_PORTSC to CFG_MXC_USB_PORTSC Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
4db38665 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_UART_BASE to CFG Perform a simple rename of CONFIG_MXC_UART_BASE to CFG_MXC_UART_BASE Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0613c36a |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_EXTRA_ENV_SETTINGS to CFG Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
54f80dd2 |
|
02-Dec-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_HOSTNAME et al to Kconfig This converts the following to Kconfig: CONFIG_GATEWAYIP CONFIG_HOSTNAME CONFIG_IPADDR CONFIG_NETMASK CONFIG_ROOTPATH CONFIG_SERVERIP CONFIG_UBOOTPATH To do this, we introduce a CONFIG_USE_ form of each of the above and change include/env_default.h to test for that to be set before setting a value. Further, we don't want to stringify the IP address related values as they are now properly strings via Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aec118eb |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
imx6/imx7: Remove now empty imx6_spl.h and imx7_spl.h There are now no flags being set in these files, so remove them. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
dd11fdc3 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_USB_FLAGS et al to CFG Perform simple renames of: CONFIG_MXC_USB_FLAGS to CFG_MXC_USB_FLAGS CONFIG_MXC_USB_PORT to CFG_MXC_USB_PORT CONFIG_MXC_USB_PORTSC to CFG_MXC_USB_PORTSC Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
4db38665 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_UART_BASE to CFG Perform a simple rename of CONFIG_MXC_UART_BASE to CFG_MXC_UART_BASE Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0613c36a |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_EXTRA_ENV_SETTINGS to CFG Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
54f80dd2 |
|
02-Dec-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_HOSTNAME et al to Kconfig This converts the following to Kconfig: CONFIG_GATEWAYIP CONFIG_HOSTNAME CONFIG_IPADDR CONFIG_NETMASK CONFIG_ROOTPATH CONFIG_SERVERIP CONFIG_UBOOTPATH To do this, we introduce a CONFIG_USE_ form of each of the above and change include/env_default.h to test for that to be set before setting a value. Further, we don't want to stringify the IP address related values as they are now properly strings via Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aec118eb |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
imx6/imx7: Remove now empty imx6_spl.h and imx7_spl.h There are now no flags being set in these files, so remove them. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
dd11fdc3 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_USB_FLAGS et al to CFG Perform simple renames of: CONFIG_MXC_USB_FLAGS to CFG_MXC_USB_FLAGS CONFIG_MXC_USB_PORT to CFG_MXC_USB_PORT CONFIG_MXC_USB_PORTSC to CFG_MXC_USB_PORTSC Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
4db38665 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_UART_BASE to CFG Perform a simple rename of CONFIG_MXC_UART_BASE to CFG_MXC_UART_BASE Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0613c36a |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_EXTRA_ENV_SETTINGS to CFG Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
54f80dd2 |
|
02-Dec-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_HOSTNAME et al to Kconfig This converts the following to Kconfig: CONFIG_GATEWAYIP CONFIG_HOSTNAME CONFIG_IPADDR CONFIG_NETMASK CONFIG_ROOTPATH CONFIG_SERVERIP CONFIG_UBOOTPATH To do this, we introduce a CONFIG_USE_ form of each of the above and change include/env_default.h to test for that to be set before setting a value. Further, we don't want to stringify the IP address related values as they are now properly strings via Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aec118eb |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
imx6/imx7: Remove now empty imx6_spl.h and imx7_spl.h There are now no flags being set in these files, so remove them. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
dd11fdc3 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_USB_FLAGS et al to CFG Perform simple renames of: CONFIG_MXC_USB_FLAGS to CFG_MXC_USB_FLAGS CONFIG_MXC_USB_PORT to CFG_MXC_USB_PORT CONFIG_MXC_USB_PORTSC to CFG_MXC_USB_PORTSC Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
4db38665 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_UART_BASE to CFG Perform a simple rename of CONFIG_MXC_UART_BASE to CFG_MXC_UART_BASE Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0613c36a |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_EXTRA_ENV_SETTINGS to CFG Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
54f80dd2 |
|
02-Dec-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_HOSTNAME et al to Kconfig This converts the following to Kconfig: CONFIG_GATEWAYIP CONFIG_HOSTNAME CONFIG_IPADDR CONFIG_NETMASK CONFIG_ROOTPATH CONFIG_SERVERIP CONFIG_UBOOTPATH To do this, we introduce a CONFIG_USE_ form of each of the above and change include/env_default.h to test for that to be set before setting a value. Further, we don't want to stringify the IP address related values as they are now properly strings via Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aec118eb |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
imx6/imx7: Remove now empty imx6_spl.h and imx7_spl.h There are now no flags being set in these files, so remove them. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
dd11fdc3 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_USB_FLAGS et al to CFG Perform simple renames of: CONFIG_MXC_USB_FLAGS to CFG_MXC_USB_FLAGS CONFIG_MXC_USB_PORT to CFG_MXC_USB_PORT CONFIG_MXC_USB_PORTSC to CFG_MXC_USB_PORTSC Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
4db38665 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_UART_BASE to CFG Perform a simple rename of CONFIG_MXC_UART_BASE to CFG_MXC_UART_BASE Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0613c36a |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_EXTRA_ENV_SETTINGS to CFG Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
54f80dd2 |
|
02-Dec-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_HOSTNAME et al to Kconfig This converts the following to Kconfig: CONFIG_GATEWAYIP CONFIG_HOSTNAME CONFIG_IPADDR CONFIG_NETMASK CONFIG_ROOTPATH CONFIG_SERVERIP CONFIG_UBOOTPATH To do this, we introduce a CONFIG_USE_ form of each of the above and change include/env_default.h to test for that to be set before setting a value. Further, we don't want to stringify the IP address related values as they are now properly strings via Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aec118eb |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
imx6/imx7: Remove now empty imx6_spl.h and imx7_spl.h There are now no flags being set in these files, so remove them. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
dd11fdc3 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_USB_FLAGS et al to CFG Perform simple renames of: CONFIG_MXC_USB_FLAGS to CFG_MXC_USB_FLAGS CONFIG_MXC_USB_PORT to CFG_MXC_USB_PORT CONFIG_MXC_USB_PORTSC to CFG_MXC_USB_PORTSC Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
4db38665 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_UART_BASE to CFG Perform a simple rename of CONFIG_MXC_UART_BASE to CFG_MXC_UART_BASE Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0613c36a |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_EXTRA_ENV_SETTINGS to CFG Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
54f80dd2 |
|
02-Dec-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_HOSTNAME et al to Kconfig This converts the following to Kconfig: CONFIG_GATEWAYIP CONFIG_HOSTNAME CONFIG_IPADDR CONFIG_NETMASK CONFIG_ROOTPATH CONFIG_SERVERIP CONFIG_UBOOTPATH To do this, we introduce a CONFIG_USE_ form of each of the above and change include/env_default.h to test for that to be set before setting a value. Further, we don't want to stringify the IP address related values as they are now properly strings via Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aec118eb |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
imx6/imx7: Remove now empty imx6_spl.h and imx7_spl.h There are now no flags being set in these files, so remove them. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
dd11fdc3 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_USB_FLAGS et al to CFG Perform simple renames of: CONFIG_MXC_USB_FLAGS to CFG_MXC_USB_FLAGS CONFIG_MXC_USB_PORT to CFG_MXC_USB_PORT CONFIG_MXC_USB_PORTSC to CFG_MXC_USB_PORTSC Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
4db38665 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_UART_BASE to CFG Perform a simple rename of CONFIG_MXC_UART_BASE to CFG_MXC_UART_BASE Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0613c36a |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_EXTRA_ENV_SETTINGS to CFG Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
54f80dd2 |
|
02-Dec-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_HOSTNAME et al to Kconfig This converts the following to Kconfig: CONFIG_GATEWAYIP CONFIG_HOSTNAME CONFIG_IPADDR CONFIG_NETMASK CONFIG_ROOTPATH CONFIG_SERVERIP CONFIG_UBOOTPATH To do this, we introduce a CONFIG_USE_ form of each of the above and change include/env_default.h to test for that to be set before setting a value. Further, we don't want to stringify the IP address related values as they are now properly strings via Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aec118eb |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
imx6/imx7: Remove now empty imx6_spl.h and imx7_spl.h There are now no flags being set in these files, so remove them. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
dd11fdc3 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_USB_FLAGS et al to CFG Perform simple renames of: CONFIG_MXC_USB_FLAGS to CFG_MXC_USB_FLAGS CONFIG_MXC_USB_PORT to CFG_MXC_USB_PORT CONFIG_MXC_USB_PORTSC to CFG_MXC_USB_PORTSC Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
4db38665 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_UART_BASE to CFG Perform a simple rename of CONFIG_MXC_UART_BASE to CFG_MXC_UART_BASE Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0613c36a |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_EXTRA_ENV_SETTINGS to CFG Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
54f80dd2 |
|
02-Dec-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_HOSTNAME et al to Kconfig This converts the following to Kconfig: CONFIG_GATEWAYIP CONFIG_HOSTNAME CONFIG_IPADDR CONFIG_NETMASK CONFIG_ROOTPATH CONFIG_SERVERIP CONFIG_UBOOTPATH To do this, we introduce a CONFIG_USE_ form of each of the above and change include/env_default.h to test for that to be set before setting a value. Further, we don't want to stringify the IP address related values as they are now properly strings via Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aec118eb |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
imx6/imx7: Remove now empty imx6_spl.h and imx7_spl.h There are now no flags being set in these files, so remove them. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
dd11fdc3 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_USB_FLAGS et al to CFG Perform simple renames of: CONFIG_MXC_USB_FLAGS to CFG_MXC_USB_FLAGS CONFIG_MXC_USB_PORT to CFG_MXC_USB_PORT CONFIG_MXC_USB_PORTSC to CFG_MXC_USB_PORTSC Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
4db38665 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_UART_BASE to CFG Perform a simple rename of CONFIG_MXC_UART_BASE to CFG_MXC_UART_BASE Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0613c36a |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_EXTRA_ENV_SETTINGS to CFG Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
54f80dd2 |
|
02-Dec-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_HOSTNAME et al to Kconfig This converts the following to Kconfig: CONFIG_GATEWAYIP CONFIG_HOSTNAME CONFIG_IPADDR CONFIG_NETMASK CONFIG_ROOTPATH CONFIG_SERVERIP CONFIG_UBOOTPATH To do this, we introduce a CONFIG_USE_ form of each of the above and change include/env_default.h to test for that to be set before setting a value. Further, we don't want to stringify the IP address related values as they are now properly strings via Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aec118eb |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
imx6/imx7: Remove now empty imx6_spl.h and imx7_spl.h There are now no flags being set in these files, so remove them. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
dd11fdc3 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_USB_FLAGS et al to CFG Perform simple renames of: CONFIG_MXC_USB_FLAGS to CFG_MXC_USB_FLAGS CONFIG_MXC_USB_PORT to CFG_MXC_USB_PORT CONFIG_MXC_USB_PORTSC to CFG_MXC_USB_PORTSC Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
4db38665 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_UART_BASE to CFG Perform a simple rename of CONFIG_MXC_UART_BASE to CFG_MXC_UART_BASE Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0613c36a |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_EXTRA_ENV_SETTINGS to CFG Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
54f80dd2 |
|
02-Dec-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_HOSTNAME et al to Kconfig This converts the following to Kconfig: CONFIG_GATEWAYIP CONFIG_HOSTNAME CONFIG_IPADDR CONFIG_NETMASK CONFIG_ROOTPATH CONFIG_SERVERIP CONFIG_UBOOTPATH To do this, we introduce a CONFIG_USE_ form of each of the above and change include/env_default.h to test for that to be set before setting a value. Further, we don't want to stringify the IP address related values as they are now properly strings via Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aec118eb |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
imx6/imx7: Remove now empty imx6_spl.h and imx7_spl.h There are now no flags being set in these files, so remove them. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
dd11fdc3 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_USB_FLAGS et al to CFG Perform simple renames of: CONFIG_MXC_USB_FLAGS to CFG_MXC_USB_FLAGS CONFIG_MXC_USB_PORT to CFG_MXC_USB_PORT CONFIG_MXC_USB_PORTSC to CFG_MXC_USB_PORTSC Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
4db38665 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_UART_BASE to CFG Perform a simple rename of CONFIG_MXC_UART_BASE to CFG_MXC_UART_BASE Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0613c36a |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_EXTRA_ENV_SETTINGS to CFG Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
54f80dd2 |
|
02-Dec-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_HOSTNAME et al to Kconfig This converts the following to Kconfig: CONFIG_GATEWAYIP CONFIG_HOSTNAME CONFIG_IPADDR CONFIG_NETMASK CONFIG_ROOTPATH CONFIG_SERVERIP CONFIG_UBOOTPATH To do this, we introduce a CONFIG_USE_ form of each of the above and change include/env_default.h to test for that to be set before setting a value. Further, we don't want to stringify the IP address related values as they are now properly strings via Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aec118eb |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
imx6/imx7: Remove now empty imx6_spl.h and imx7_spl.h There are now no flags being set in these files, so remove them. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
dd11fdc3 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_USB_FLAGS et al to CFG Perform simple renames of: CONFIG_MXC_USB_FLAGS to CFG_MXC_USB_FLAGS CONFIG_MXC_USB_PORT to CFG_MXC_USB_PORT CONFIG_MXC_USB_PORTSC to CFG_MXC_USB_PORTSC Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
4db38665 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_UART_BASE to CFG Perform a simple rename of CONFIG_MXC_UART_BASE to CFG_MXC_UART_BASE Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0613c36a |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_EXTRA_ENV_SETTINGS to CFG Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
54f80dd2 |
|
02-Dec-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_HOSTNAME et al to Kconfig This converts the following to Kconfig: CONFIG_GATEWAYIP CONFIG_HOSTNAME CONFIG_IPADDR CONFIG_NETMASK CONFIG_ROOTPATH CONFIG_SERVERIP CONFIG_UBOOTPATH To do this, we introduce a CONFIG_USE_ form of each of the above and change include/env_default.h to test for that to be set before setting a value. Further, we don't want to stringify the IP address related values as they are now properly strings via Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aec118eb |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
imx6/imx7: Remove now empty imx6_spl.h and imx7_spl.h There are now no flags being set in these files, so remove them. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
dd11fdc3 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_USB_FLAGS et al to CFG Perform simple renames of: CONFIG_MXC_USB_FLAGS to CFG_MXC_USB_FLAGS CONFIG_MXC_USB_PORT to CFG_MXC_USB_PORT CONFIG_MXC_USB_PORTSC to CFG_MXC_USB_PORTSC Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
4db38665 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_UART_BASE to CFG Perform a simple rename of CONFIG_MXC_UART_BASE to CFG_MXC_UART_BASE Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0613c36a |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_EXTRA_ENV_SETTINGS to CFG Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
54f80dd2 |
|
02-Dec-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_HOSTNAME et al to Kconfig This converts the following to Kconfig: CONFIG_GATEWAYIP CONFIG_HOSTNAME CONFIG_IPADDR CONFIG_NETMASK CONFIG_ROOTPATH CONFIG_SERVERIP CONFIG_UBOOTPATH To do this, we introduce a CONFIG_USE_ form of each of the above and change include/env_default.h to test for that to be set before setting a value. Further, we don't want to stringify the IP address related values as they are now properly strings via Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aec118eb |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
imx6/imx7: Remove now empty imx6_spl.h and imx7_spl.h There are now no flags being set in these files, so remove them. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
dd11fdc3 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_USB_FLAGS et al to CFG Perform simple renames of: CONFIG_MXC_USB_FLAGS to CFG_MXC_USB_FLAGS CONFIG_MXC_USB_PORT to CFG_MXC_USB_PORT CONFIG_MXC_USB_PORTSC to CFG_MXC_USB_PORTSC Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
4db38665 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_UART_BASE to CFG Perform a simple rename of CONFIG_MXC_UART_BASE to CFG_MXC_UART_BASE Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0613c36a |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_EXTRA_ENV_SETTINGS to CFG Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
54f80dd2 |
|
02-Dec-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_HOSTNAME et al to Kconfig This converts the following to Kconfig: CONFIG_GATEWAYIP CONFIG_HOSTNAME CONFIG_IPADDR CONFIG_NETMASK CONFIG_ROOTPATH CONFIG_SERVERIP CONFIG_UBOOTPATH To do this, we introduce a CONFIG_USE_ form of each of the above and change include/env_default.h to test for that to be set before setting a value. Further, we don't want to stringify the IP address related values as they are now properly strings via Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aec118eb |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
imx6/imx7: Remove now empty imx6_spl.h and imx7_spl.h There are now no flags being set in these files, so remove them. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
dd11fdc3 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_USB_FLAGS et al to CFG Perform simple renames of: CONFIG_MXC_USB_FLAGS to CFG_MXC_USB_FLAGS CONFIG_MXC_USB_PORT to CFG_MXC_USB_PORT CONFIG_MXC_USB_PORTSC to CFG_MXC_USB_PORTSC Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
4db38665 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_UART_BASE to CFG Perform a simple rename of CONFIG_MXC_UART_BASE to CFG_MXC_UART_BASE Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0613c36a |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_EXTRA_ENV_SETTINGS to CFG Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
54f80dd2 |
|
02-Dec-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_HOSTNAME et al to Kconfig This converts the following to Kconfig: CONFIG_GATEWAYIP CONFIG_HOSTNAME CONFIG_IPADDR CONFIG_NETMASK CONFIG_ROOTPATH CONFIG_SERVERIP CONFIG_UBOOTPATH To do this, we introduce a CONFIG_USE_ form of each of the above and change include/env_default.h to test for that to be set before setting a value. Further, we don't want to stringify the IP address related values as they are now properly strings via Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aec118eb |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
imx6/imx7: Remove now empty imx6_spl.h and imx7_spl.h There are now no flags being set in these files, so remove them. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
dd11fdc3 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_USB_FLAGS et al to CFG Perform simple renames of: CONFIG_MXC_USB_FLAGS to CFG_MXC_USB_FLAGS CONFIG_MXC_USB_PORT to CFG_MXC_USB_PORT CONFIG_MXC_USB_PORTSC to CFG_MXC_USB_PORTSC Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
4db38665 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_UART_BASE to CFG Perform a simple rename of CONFIG_MXC_UART_BASE to CFG_MXC_UART_BASE Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0613c36a |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_EXTRA_ENV_SETTINGS to CFG Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
54f80dd2 |
|
02-Dec-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_HOSTNAME et al to Kconfig This converts the following to Kconfig: CONFIG_GATEWAYIP CONFIG_HOSTNAME CONFIG_IPADDR CONFIG_NETMASK CONFIG_ROOTPATH CONFIG_SERVERIP CONFIG_UBOOTPATH To do this, we introduce a CONFIG_USE_ form of each of the above and change include/env_default.h to test for that to be set before setting a value. Further, we don't want to stringify the IP address related values as they are now properly strings via Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aec118eb |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
imx6/imx7: Remove now empty imx6_spl.h and imx7_spl.h There are now no flags being set in these files, so remove them. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
dd11fdc3 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_USB_FLAGS et al to CFG Perform simple renames of: CONFIG_MXC_USB_FLAGS to CFG_MXC_USB_FLAGS CONFIG_MXC_USB_PORT to CFG_MXC_USB_PORT CONFIG_MXC_USB_PORTSC to CFG_MXC_USB_PORTSC Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
4db38665 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_UART_BASE to CFG Perform a simple rename of CONFIG_MXC_UART_BASE to CFG_MXC_UART_BASE Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0613c36a |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_EXTRA_ENV_SETTINGS to CFG Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
54f80dd2 |
|
02-Dec-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_HOSTNAME et al to Kconfig This converts the following to Kconfig: CONFIG_GATEWAYIP CONFIG_HOSTNAME CONFIG_IPADDR CONFIG_NETMASK CONFIG_ROOTPATH CONFIG_SERVERIP CONFIG_UBOOTPATH To do this, we introduce a CONFIG_USE_ form of each of the above and change include/env_default.h to test for that to be set before setting a value. Further, we don't want to stringify the IP address related values as they are now properly strings via Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aec118eb |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
imx6/imx7: Remove now empty imx6_spl.h and imx7_spl.h There are now no flags being set in these files, so remove them. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
dd11fdc3 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_USB_FLAGS et al to CFG Perform simple renames of: CONFIG_MXC_USB_FLAGS to CFG_MXC_USB_FLAGS CONFIG_MXC_USB_PORT to CFG_MXC_USB_PORT CONFIG_MXC_USB_PORTSC to CFG_MXC_USB_PORTSC Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
4db38665 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_UART_BASE to CFG Perform a simple rename of CONFIG_MXC_UART_BASE to CFG_MXC_UART_BASE Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0613c36a |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_EXTRA_ENV_SETTINGS to CFG Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
54f80dd2 |
|
02-Dec-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_HOSTNAME et al to Kconfig This converts the following to Kconfig: CONFIG_GATEWAYIP CONFIG_HOSTNAME CONFIG_IPADDR CONFIG_NETMASK CONFIG_ROOTPATH CONFIG_SERVERIP CONFIG_UBOOTPATH To do this, we introduce a CONFIG_USE_ form of each of the above and change include/env_default.h to test for that to be set before setting a value. Further, we don't want to stringify the IP address related values as they are now properly strings via Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aec118eb |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
imx6/imx7: Remove now empty imx6_spl.h and imx7_spl.h There are now no flags being set in these files, so remove them. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
dd11fdc3 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_USB_FLAGS et al to CFG Perform simple renames of: CONFIG_MXC_USB_FLAGS to CFG_MXC_USB_FLAGS CONFIG_MXC_USB_PORT to CFG_MXC_USB_PORT CONFIG_MXC_USB_PORTSC to CFG_MXC_USB_PORTSC Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
4db38665 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_UART_BASE to CFG Perform a simple rename of CONFIG_MXC_UART_BASE to CFG_MXC_UART_BASE Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0613c36a |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_EXTRA_ENV_SETTINGS to CFG Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
54f80dd2 |
|
02-Dec-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_HOSTNAME et al to Kconfig This converts the following to Kconfig: CONFIG_GATEWAYIP CONFIG_HOSTNAME CONFIG_IPADDR CONFIG_NETMASK CONFIG_ROOTPATH CONFIG_SERVERIP CONFIG_UBOOTPATH To do this, we introduce a CONFIG_USE_ form of each of the above and change include/env_default.h to test for that to be set before setting a value. Further, we don't want to stringify the IP address related values as they are now properly strings via Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aec118eb |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
imx6/imx7: Remove now empty imx6_spl.h and imx7_spl.h There are now no flags being set in these files, so remove them. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
dd11fdc3 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_USB_FLAGS et al to CFG Perform simple renames of: CONFIG_MXC_USB_FLAGS to CFG_MXC_USB_FLAGS CONFIG_MXC_USB_PORT to CFG_MXC_USB_PORT CONFIG_MXC_USB_PORTSC to CFG_MXC_USB_PORTSC Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
4db38665 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_UART_BASE to CFG Perform a simple rename of CONFIG_MXC_UART_BASE to CFG_MXC_UART_BASE Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0613c36a |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_EXTRA_ENV_SETTINGS to CFG Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
54f80dd2 |
|
02-Dec-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_HOSTNAME et al to Kconfig This converts the following to Kconfig: CONFIG_GATEWAYIP CONFIG_HOSTNAME CONFIG_IPADDR CONFIG_NETMASK CONFIG_ROOTPATH CONFIG_SERVERIP CONFIG_UBOOTPATH To do this, we introduce a CONFIG_USE_ form of each of the above and change include/env_default.h to test for that to be set before setting a value. Further, we don't want to stringify the IP address related values as they are now properly strings via Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aec118eb |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
imx6/imx7: Remove now empty imx6_spl.h and imx7_spl.h There are now no flags being set in these files, so remove them. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
dd11fdc3 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_USB_FLAGS et al to CFG Perform simple renames of: CONFIG_MXC_USB_FLAGS to CFG_MXC_USB_FLAGS CONFIG_MXC_USB_PORT to CFG_MXC_USB_PORT CONFIG_MXC_USB_PORTSC to CFG_MXC_USB_PORTSC Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
4db38665 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_UART_BASE to CFG Perform a simple rename of CONFIG_MXC_UART_BASE to CFG_MXC_UART_BASE Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0613c36a |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_EXTRA_ENV_SETTINGS to CFG Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
54f80dd2 |
|
02-Dec-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_HOSTNAME et al to Kconfig This converts the following to Kconfig: CONFIG_GATEWAYIP CONFIG_HOSTNAME CONFIG_IPADDR CONFIG_NETMASK CONFIG_ROOTPATH CONFIG_SERVERIP CONFIG_UBOOTPATH To do this, we introduce a CONFIG_USE_ form of each of the above and change include/env_default.h to test for that to be set before setting a value. Further, we don't want to stringify the IP address related values as they are now properly strings via Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aec118eb |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
imx6/imx7: Remove now empty imx6_spl.h and imx7_spl.h There are now no flags being set in these files, so remove them. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
dd11fdc3 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_USB_FLAGS et al to CFG Perform simple renames of: CONFIG_MXC_USB_FLAGS to CFG_MXC_USB_FLAGS CONFIG_MXC_USB_PORT to CFG_MXC_USB_PORT CONFIG_MXC_USB_PORTSC to CFG_MXC_USB_PORTSC Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
4db38665 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_UART_BASE to CFG Perform a simple rename of CONFIG_MXC_UART_BASE to CFG_MXC_UART_BASE Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0613c36a |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_EXTRA_ENV_SETTINGS to CFG Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
54f80dd2 |
|
02-Dec-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_HOSTNAME et al to Kconfig This converts the following to Kconfig: CONFIG_GATEWAYIP CONFIG_HOSTNAME CONFIG_IPADDR CONFIG_NETMASK CONFIG_ROOTPATH CONFIG_SERVERIP CONFIG_UBOOTPATH To do this, we introduce a CONFIG_USE_ form of each of the above and change include/env_default.h to test for that to be set before setting a value. Further, we don't want to stringify the IP address related values as they are now properly strings via Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aec118eb |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
imx6/imx7: Remove now empty imx6_spl.h and imx7_spl.h There are now no flags being set in these files, so remove them. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
dd11fdc3 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_USB_FLAGS et al to CFG Perform simple renames of: CONFIG_MXC_USB_FLAGS to CFG_MXC_USB_FLAGS CONFIG_MXC_USB_PORT to CFG_MXC_USB_PORT CONFIG_MXC_USB_PORTSC to CFG_MXC_USB_PORTSC Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
4db38665 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_UART_BASE to CFG Perform a simple rename of CONFIG_MXC_UART_BASE to CFG_MXC_UART_BASE Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0613c36a |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_EXTRA_ENV_SETTINGS to CFG Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
54f80dd2 |
|
02-Dec-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_HOSTNAME et al to Kconfig This converts the following to Kconfig: CONFIG_GATEWAYIP CONFIG_HOSTNAME CONFIG_IPADDR CONFIG_NETMASK CONFIG_ROOTPATH CONFIG_SERVERIP CONFIG_UBOOTPATH To do this, we introduce a CONFIG_USE_ form of each of the above and change include/env_default.h to test for that to be set before setting a value. Further, we don't want to stringify the IP address related values as they are now properly strings via Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aec118eb |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
imx6/imx7: Remove now empty imx6_spl.h and imx7_spl.h There are now no flags being set in these files, so remove them. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
dd11fdc3 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_USB_FLAGS et al to CFG Perform simple renames of: CONFIG_MXC_USB_FLAGS to CFG_MXC_USB_FLAGS CONFIG_MXC_USB_PORT to CFG_MXC_USB_PORT CONFIG_MXC_USB_PORTSC to CFG_MXC_USB_PORTSC Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
4db38665 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_UART_BASE to CFG Perform a simple rename of CONFIG_MXC_UART_BASE to CFG_MXC_UART_BASE Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0613c36a |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_EXTRA_ENV_SETTINGS to CFG Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
54f80dd2 |
|
02-Dec-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_HOSTNAME et al to Kconfig This converts the following to Kconfig: CONFIG_GATEWAYIP CONFIG_HOSTNAME CONFIG_IPADDR CONFIG_NETMASK CONFIG_ROOTPATH CONFIG_SERVERIP CONFIG_UBOOTPATH To do this, we introduce a CONFIG_USE_ form of each of the above and change include/env_default.h to test for that to be set before setting a value. Further, we don't want to stringify the IP address related values as they are now properly strings via Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aec118eb |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
imx6/imx7: Remove now empty imx6_spl.h and imx7_spl.h There are now no flags being set in these files, so remove them. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
dd11fdc3 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_USB_FLAGS et al to CFG Perform simple renames of: CONFIG_MXC_USB_FLAGS to CFG_MXC_USB_FLAGS CONFIG_MXC_USB_PORT to CFG_MXC_USB_PORT CONFIG_MXC_USB_PORTSC to CFG_MXC_USB_PORTSC Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
4db38665 |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_MXC_UART_BASE to CFG Perform a simple rename of CONFIG_MXC_UART_BASE to CFG_MXC_UART_BASE Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0613c36a |
|
04-Dec-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_EXTRA_ENV_SETTINGS to CFG Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
54f80dd2 |
|
02-Dec-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_HOSTNAME et al to Kconfig This converts the following to Kconfig: CONFIG_GATEWAYIP CONFIG_HOSTNAME CONFIG_IPADDR CONFIG_NETMASK CONFIG_ROOTPATH CONFIG_SERVERIP CONFIG_UBOOTPATH To do this, we introduce a CONFIG_USE_ form of each of the above and change include/env_default.h to test for that to be set before setting a value. Further, we don't want to stringify the IP address related values as they are now properly strings via Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aa6e94de |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
aec118eb |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
imx6/imx7: Remove now empty imx6_spl.h and imx7_spl.h There are now no flags being set in these files, so remove them. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
98463903 |
|
20-Oct-2022 |
Simon Glass <sjg@chromium.org> |
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
7dd6af85 |
|
23-Aug-2022 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT Move the environment from the board header to a separate text file and also drop those variables that are already set in env_default.h from the Kconfig options or are not needed anymore. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
e6ca1481 |
|
31-May-2022 |
Pali Rohár <pali@kernel.org> |
distroboot: Fix ubifs Fix multiple issues in ubifs distroboot code: U-Boot supports attaching only one MTD device as UBI at the time. So always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part' command attach MTD device always as UBI device ubi0. Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command. Distroboot scripts require ${bootfstype} variable to be properly set and it is already set for all other boot types. Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI device does not have partitions, but has volumes. Distroboot scripts require something to be set in ${distro_bootpart} variable, so set it to the UBI volume which is currently mounted by ubifs. Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code differs from the other partition code that it requires "ubi" prefix before number. Explicitly unmount ubifs volume after loading all data from it. This allows to detach UBI device from MTD device. Move definition of MTD device with UBI and UBI volume with ubifs filesystem from global env variables ${bootubipart} and ${bootubivol} into the distroboot "func" macro, defined in board include config files. UBIFS distroboot macros then set ${bootubipart} and ${bootubivol} local variables for compatibility with existing distroboot scripts. This last change allows to define more UBIFS target devices and make it clear what is boot MTD/UBI device. All board include config files are adjusted to use this new scheme of specifying boot MTD/UBI device. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
#
3371edda |
|
12-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
910feb50 |
|
10-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Globally remove most CONFIG_SPL_BUILD tests from config headers With the exception of how PowerPC handles SPL and TPL (which has its own issues), we cannot safely hide options under CONFIG_SPL_BUILD. Largely remove the places that have this test today. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e78e880d |
|
08-Jun-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
eaf6ea6a |
|
24-May-2022 |
Tom Rini <trini@konsulko.com> |
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
0e14cdfa |
|
11-Mar-2022 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
de35b8f9 |
|
11-Dec-2021 |
Tom Rini <trini@konsulko.com> |
Remove CONFIG_SYS_MMC_IMG_LOAD_PART from CONFIG namespace This option is used as part of configuring the default environment for a number of platforms. However, it is always set to 1 and the only time it is part of Kconfig, it is used in a hard-coded manner. Hard-code the value in the environment instead. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
1a77da4b |
|
30-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Convert CONFIG_SYS_HZ to Kconfig This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|
#
e6f48aad |
|
29-Sep-2021 |
Frieder Schrempf <frieder.schrempf@kontron.de> |
imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx) This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by Kontron Electronics GmbH. Currently there are the following SoM flavors (SoM-Line): * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND And the according evaluation boards (Board-Line): * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ... * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ... * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ... Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config options at compile-time. Though the differences are so minor, that for the scope of these SoMs we just use a single defconfig that is compatible with both SoCs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
|