#
f516fd99 |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move serial_printf() to the serial header Move this function header to serial.h since this function is clearly related to serial. The function itself stays in console.c since we don't have a single serial file. DM and non-DM each has a separate file so we would have to either create a new common serial file, or repeat the function in both serial.c and serial-uclass.c, neither of which seem worthwhile. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com> |
#
83d290c5 |
|
06-May-2018 |
Tom Rini <trini@konsulko.com> |
SPDX: Convert all of our single license tags to Linux Kernel style When U-Boot started using SPDX tags we were among the early adopters and there weren't a lot of other examples to borrow from. So we picked the area of the file that usually had a full license text and replaced it with an appropriate SPDX-License-Identifier: entry. Since then, the Linux Kernel has adopted SPDX tags and they place it as the very first line in a file (except where shebangs are used, then it's second line) and with slightly different comment styles than us. In part due to community overlap, in part due to better tag visibility and in part for other minor reasons, switch over to that style. This commit changes all instances where we have a single declared license in the tag as both the before and after are identical in tag contents. There's also a few places where I found we did not have a tag and have introduced one. Signed-off-by: Tom Rini <trini@konsulko.com> |
#
77777f76 |
|
12-May-2017 |
Tom Rini <trini@konsulko.com> |
omap4: Drop redundant CONFIG_OMAP4430 symbol While there are a few different OMAP4 SoCs, today we always set CONFIG_OMAP4430 and CONFIG_OMAP44XX. Convert the few test of CONFIG_OMAP4430 to CONFIG_OMAP44XX. Cc: Marek Vasut <marex@denx.de> Cc: Paul Kocialkowski <contact@paulk.fr> Signed-off-by: Tom Rini <trini@konsulko.com> |
#
864896be |
|
12-May-2017 |
Tom Rini <trini@konsulko.com> |
omap3: Drop CONFIG_OMAP3_EVM, switch to CONFIG_TARGET_OMAP3_EVM when needed We make use of CONFIG_OMAP3_EVM today to know when to do a specific tweak in MUSB. This can be tested on via CONFIG_TARGET_OMAP3_EVM instead, so switch there so we can drop the now unused symbol CONFIG_OMAP3_EVM. In investigating what to do about the symbol usage we see that the cairo board defines the same function, but never called it (as it does not define CONFIG_OMAP3_EVM) and was just returning anyhow, so drop that function from that board. Cc: "Albert ARIBAUD (3ADEV)" <albert.aribaud@3adev.fr> Cc: Marek Vasut <marex@denx.de> Signed-off-by: Tom Rini <trini@konsulko.com> |
#
1a459660 |
|
08-Jul-2013 |
Wolfgang Denk <wd@denx.de> |
Add GPL-2.0+ SPDX-License-Identifier to source files Signed-off-by: Wolfgang Denk <wd@denx.de> [trini: Fixup common/cmd_io.c] Signed-off-by: Tom Rini <trini@ti.com> |
#
9239f5b6 |
|
29-May-2013 |
Lokesh Vutla <lokeshvutla@ti.com> |
ARM: OMAP4+: Cleanup header files After having the u-boot clean up series, there are many definitions that are unused in header files. Removing all those unused ones. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> |
#
9b167577 |
|
25-Jun-2010 |
Steve Sakoman <steve@sakoman.com> |
ARMV7: Restructure omap3 musb driver to allow code sharing between OMAP3 and OMAP4 Signed-off-by: Steve Sakoman <steve@sakoman.com> Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com> |
#
944a4894 |
|
09-Jun-2010 |
Ajay Kumar Gupta <ajay.gupta@ti.com> |
musb: Program extvbus for OMAP3EVM Rev >= E OMAP3EVM Rev >=E uses external Vbus supply so setting 'extvbus' to '1' for OMAP3EVM Rev >=E runtime based on EVM revision. CC: Remy Bohmer <linux@bohmer.net> Signed-off-by: Ajay Kumar Gupta <ajay.gupta@ti.com> |
#
bbf4c01e |
|
09-Jun-2010 |
Ajay Kumar Gupta <ajay.gupta@ti.com> |
musb: Use name based initialization for musb_config Changed musb_config initialization for omap3.c, davinci.c and da8xx.c using name of structure fields. This would cause the uninitialized field to be null by default and thus would help in avoiding to init some flags required to be set only for a few selected platforms. CC: Remy Bohmer <linux@bohmer.net> Signed-off-by: Ajay Kumar Gupta <ajay.gupta@ti.com> |
#
b301be05 |
|
24-Dec-2009 |
Sanjeev Premi <premi@ti.com> |
omap3: fix compile warning This patch fixes this warning during compile: omap3.c: In function 'musb_platform_init': omap3.c:126: warning: label 'end' defined but not used Problem reported by: Dirk Behme[dirk.behme@googlemail.com] Signed-off-by: Sanjeev Premi <premi@ti.com> |
#
ae4caf2f |
|
30-Oct-2009 |
Tom Rix <Tom.Rix@windriver.com> |
OMAP3 USB Initialize twl4030 only if required OMAP3EVM uses ISP1504 phy and so twl4030 related init is not required. Submitted-by: Ajay Kumar Gupta <ajay.gupta@ti.com> Signed-off-by: Tom Rix <Tom.Rix@windriver.com> |
#
f298e4b6 |
|
30-Oct-2009 |
Tom Rix <Tom.Rix@windriver.com> |
OMAP3 Add usb device support This change adds the usb device support for musb. Omap3 platform support added at the same level as davinci. The interface for usbtty to use the musb device support was added. Verified on omap3 beagle, zoom1 and zoom2. Signed-off-by: Tom Rix <Tom.Rix@windriver.com> |
#
83d290c5 |
|
06-May-2018 |
Tom Rini <trini@konsulko.com> |
SPDX: Convert all of our single license tags to Linux Kernel style When U-Boot started using SPDX tags we were among the early adopters and there weren't a lot of other examples to borrow from. So we picked the area of the file that usually had a full license text and replaced it with an appropriate SPDX-License-Identifier: entry. Since then, the Linux Kernel has adopted SPDX tags and they place it as the very first line in a file (except where shebangs are used, then it's second line) and with slightly different comment styles than us. In part due to community overlap, in part due to better tag visibility and in part for other minor reasons, switch over to that style. This commit changes all instances where we have a single declared license in the tag as both the before and after are identical in tag contents. There's also a few places where I found we did not have a tag and have introduced one. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
77777f76 |
|
12-May-2017 |
Tom Rini <trini@konsulko.com> |
omap4: Drop redundant CONFIG_OMAP4430 symbol While there are a few different OMAP4 SoCs, today we always set CONFIG_OMAP4430 and CONFIG_OMAP44XX. Convert the few test of CONFIG_OMAP4430 to CONFIG_OMAP44XX. Cc: Marek Vasut <marex@denx.de> Cc: Paul Kocialkowski <contact@paulk.fr> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
864896be |
|
12-May-2017 |
Tom Rini <trini@konsulko.com> |
omap3: Drop CONFIG_OMAP3_EVM, switch to CONFIG_TARGET_OMAP3_EVM when needed We make use of CONFIG_OMAP3_EVM today to know when to do a specific tweak in MUSB. This can be tested on via CONFIG_TARGET_OMAP3_EVM instead, so switch there so we can drop the now unused symbol CONFIG_OMAP3_EVM. In investigating what to do about the symbol usage we see that the cairo board defines the same function, but never called it (as it does not define CONFIG_OMAP3_EVM) and was just returning anyhow, so drop that function from that board. Cc: "Albert ARIBAUD (3ADEV)" <albert.aribaud@3adev.fr> Cc: Marek Vasut <marex@denx.de> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1a459660 |
|
08-Jul-2013 |
Wolfgang Denk <wd@denx.de> |
Add GPL-2.0+ SPDX-License-Identifier to source files Signed-off-by: Wolfgang Denk <wd@denx.de> [trini: Fixup common/cmd_io.c] Signed-off-by: Tom Rini <trini@ti.com>
|
#
9239f5b6 |
|
29-May-2013 |
Lokesh Vutla <lokeshvutla@ti.com> |
ARM: OMAP4+: Cleanup header files After having the u-boot clean up series, there are many definitions that are unused in header files. Removing all those unused ones. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
9b167577 |
|
25-Jun-2010 |
Steve Sakoman <steve@sakoman.com> |
ARMV7: Restructure omap3 musb driver to allow code sharing between OMAP3 and OMAP4 Signed-off-by: Steve Sakoman <steve@sakoman.com> Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
|
#
944a4894 |
|
09-Jun-2010 |
Ajay Kumar Gupta <ajay.gupta@ti.com> |
musb: Program extvbus for OMAP3EVM Rev >= E OMAP3EVM Rev >=E uses external Vbus supply so setting 'extvbus' to '1' for OMAP3EVM Rev >=E runtime based on EVM revision. CC: Remy Bohmer <linux@bohmer.net> Signed-off-by: Ajay Kumar Gupta <ajay.gupta@ti.com>
|
#
bbf4c01e |
|
09-Jun-2010 |
Ajay Kumar Gupta <ajay.gupta@ti.com> |
musb: Use name based initialization for musb_config Changed musb_config initialization for omap3.c, davinci.c and da8xx.c using name of structure fields. This would cause the uninitialized field to be null by default and thus would help in avoiding to init some flags required to be set only for a few selected platforms. CC: Remy Bohmer <linux@bohmer.net> Signed-off-by: Ajay Kumar Gupta <ajay.gupta@ti.com>
|
#
b301be05 |
|
24-Dec-2009 |
Sanjeev Premi <premi@ti.com> |
omap3: fix compile warning This patch fixes this warning during compile: omap3.c: In function 'musb_platform_init': omap3.c:126: warning: label 'end' defined but not used Problem reported by: Dirk Behme[dirk.behme@googlemail.com] Signed-off-by: Sanjeev Premi <premi@ti.com>
|
#
ae4caf2f |
|
30-Oct-2009 |
Tom Rix <Tom.Rix@windriver.com> |
OMAP3 USB Initialize twl4030 only if required OMAP3EVM uses ISP1504 phy and so twl4030 related init is not required. Submitted-by: Ajay Kumar Gupta <ajay.gupta@ti.com> Signed-off-by: Tom Rix <Tom.Rix@windriver.com>
|
#
f298e4b6 |
|
30-Oct-2009 |
Tom Rix <Tom.Rix@windriver.com> |
OMAP3 Add usb device support This change adds the usb device support for musb. Omap3 platform support added at the same level as davinci. The interface for usbtty to use the musb device support was added. Verified on omap3 beagle, zoom1 and zoom2. Signed-off-by: Tom Rix <Tom.Rix@windriver.com>
|