#
d678a59d |
|
18-May-2024 |
Tom Rini <trini@konsulko.com> |
Revert "Merge patch series "arm: dts: am62-beagleplay: Fix Beagleplay Ethernet"" When bringing in the series 'arm: dts: am62-beagleplay: Fix Beagleplay Ethernet"' I failed to notice that b4 noticed it was based on next and so took that as the base commit and merged that part of next to master. This reverts commit c8ffd1356d42223cbb8c86280a083cc3c93e6426, reversing changes made to 2ee6f3a5f7550de3599faef9704e166e5dcace35. Reported-by: Jonas Karlman <jonas@kwiboo.se> Signed-off-by: Tom Rini <trini@konsulko.com> |
#
37de7187 |
|
01-May-2024 |
Tom Rini <trini@konsulko.com> |
pwm: Remove <common.h> and add needed includes Remove <common.h> from this driver directory and when needed add missing include files directly. Signed-off-by: Tom Rini <trini@konsulko.com> |
#
13248d66 |
|
09-Nov-2023 |
Igor Prusov <ivprusov@salutedevices.com> |
treewide: use linux/time.h for time conversion defines Now that we have time conversion defines from in time.h there is no need for each driver to define their own version. Signed-off-by: Igor Prusov <ivprusov@salutedevices.com> Reviewed-by: Svyatoslav Ryhel <clamor95@gmail.com> # tegra Reviewed-by: Eugen Hristev <eugen.hristev@collabora.com> #at91 Reviewed-by: Caleb Connolly <caleb.connolly@linaro.org> #qcom geni Reviewed-by: Stefan Bosch <stefan_b@posteo.net> #nanopi2 Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com> |
#
0cf207ec |
|
27-Sep-2021 |
Wolfgang Denk <wd@denx.de> |
WS cleanup: remove SPACE(s) followed by TAB Signed-off-by: Wolfgang Denk <wd@denx.de> |
#
f10643cf |
|
19-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: core: Access device ofnode through functions At present ofnode is present in the device even if it is never used. With of-platdata this field is not used, so can be removed. In preparation for this, change the access to go through inline functions. Signed-off-by: Simon Glass <sjg@chromium.org> |
#
d1998a9f |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename ofdata_to_platdata() to of_to_plat() This name is far too long. Rename it to remove the 'data' bits. This makes it consistent with the platdata->plat rename. Signed-off-by: Simon Glass <sjg@chromium.org> |
#
41575d8e |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename auto_alloc_size members to be shorter This construct is quite long-winded. In earlier days it made some sense since auto-allocation was a strange concept. But with driver model now used pretty universally, we can shorten this to 'auto'. This reduces verbosity and makes it easier to read. Coincidentally it also ensures that every declaration is on one line, thus making dtoc's job easier. Signed-off-by: Simon Glass <sjg@chromium.org> |
#
2d481b2e |
|
01-Oct-2020 |
Neil Armstrong <neil.armstrong@linaro.org> |
pwm: Add driver for Amlogic Meson PWM controller This adds the driver for the PWM controller found in the Amlogic SoCs. This PWM is only a set of Gates, Dividers and Counters: PWM output is achieved by calculating a clock that permits calculating two periods (low and high). The counter then has to be set to switch after N cycles for the first half period. The hardware has no "polarity" setting. This driver reverses the period cycles (the low length is inverted with the high length) for PWM_POLARITY_INVERSED. Disabling the PWM stops the output immediately (without waiting for the current period to complete first). Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> |
#
37de7187 |
|
01-May-2024 |
Tom Rini <trini@konsulko.com> |
pwm: Remove <common.h> and add needed includes Remove <common.h> from this driver directory and when needed add missing include files directly. Signed-off-by: Tom Rini <trini@konsulko.com> |
#
13248d66 |
|
09-Nov-2023 |
Igor Prusov <ivprusov@salutedevices.com> |
treewide: use linux/time.h for time conversion defines Now that we have time conversion defines from in time.h there is no need for each driver to define their own version. Signed-off-by: Igor Prusov <ivprusov@salutedevices.com> Reviewed-by: Svyatoslav Ryhel <clamor95@gmail.com> # tegra Reviewed-by: Eugen Hristev <eugen.hristev@collabora.com> #at91 Reviewed-by: Caleb Connolly <caleb.connolly@linaro.org> #qcom geni Reviewed-by: Stefan Bosch <stefan_b@posteo.net> #nanopi2 Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com> |
#
0cf207ec |
|
27-Sep-2021 |
Wolfgang Denk <wd@denx.de> |
WS cleanup: remove SPACE(s) followed by TAB Signed-off-by: Wolfgang Denk <wd@denx.de> |
#
f10643cf |
|
19-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: core: Access device ofnode through functions At present ofnode is present in the device even if it is never used. With of-platdata this field is not used, so can be removed. In preparation for this, change the access to go through inline functions. Signed-off-by: Simon Glass <sjg@chromium.org> |
#
d1998a9f |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename ofdata_to_platdata() to of_to_plat() This name is far too long. Rename it to remove the 'data' bits. This makes it consistent with the platdata->plat rename. Signed-off-by: Simon Glass <sjg@chromium.org> |
#
41575d8e |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename auto_alloc_size members to be shorter This construct is quite long-winded. In earlier days it made some sense since auto-allocation was a strange concept. But with driver model now used pretty universally, we can shorten this to 'auto'. This reduces verbosity and makes it easier to read. Coincidentally it also ensures that every declaration is on one line, thus making dtoc's job easier. Signed-off-by: Simon Glass <sjg@chromium.org> |
#
2d481b2e |
|
01-Oct-2020 |
Neil Armstrong <neil.armstrong@linaro.org> |
pwm: Add driver for Amlogic Meson PWM controller This adds the driver for the PWM controller found in the Amlogic SoCs. This PWM is only a set of Gates, Dividers and Counters: PWM output is achieved by calculating a clock that permits calculating two periods (low and high). The counter then has to be set to switch after N cycles for the first half period. The hardware has no "polarity" setting. This driver reverses the period cycles (the low length is inverted with the high length) for PWM_POLARITY_INVERSED. Disabling the PWM stops the output immediately (without waiting for the current period to complete first). Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> |
#
13248d66 |
|
09-Nov-2023 |
Igor Prusov <ivprusov@salutedevices.com> |
treewide: use linux/time.h for time conversion defines Now that we have time conversion defines from in time.h there is no need for each driver to define their own version. Signed-off-by: Igor Prusov <ivprusov@salutedevices.com> Reviewed-by: Svyatoslav Ryhel <clamor95@gmail.com> # tegra Reviewed-by: Eugen Hristev <eugen.hristev@collabora.com> #at91 Reviewed-by: Caleb Connolly <caleb.connolly@linaro.org> #qcom geni Reviewed-by: Stefan Bosch <stefan_b@posteo.net> #nanopi2 Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com> |
#
0cf207ec |
|
27-Sep-2021 |
Wolfgang Denk <wd@denx.de> |
WS cleanup: remove SPACE(s) followed by TAB Signed-off-by: Wolfgang Denk <wd@denx.de> |
#
f10643cf |
|
19-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: core: Access device ofnode through functions At present ofnode is present in the device even if it is never used. With of-platdata this field is not used, so can be removed. In preparation for this, change the access to go through inline functions. Signed-off-by: Simon Glass <sjg@chromium.org> |
#
d1998a9f |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename ofdata_to_platdata() to of_to_plat() This name is far too long. Rename it to remove the 'data' bits. This makes it consistent with the platdata->plat rename. Signed-off-by: Simon Glass <sjg@chromium.org> |
#
41575d8e |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename auto_alloc_size members to be shorter This construct is quite long-winded. In earlier days it made some sense since auto-allocation was a strange concept. But with driver model now used pretty universally, we can shorten this to 'auto'. This reduces verbosity and makes it easier to read. Coincidentally it also ensures that every declaration is on one line, thus making dtoc's job easier. Signed-off-by: Simon Glass <sjg@chromium.org> |
#
2d481b2e |
|
01-Oct-2020 |
Neil Armstrong <neil.armstrong@linaro.org> |
pwm: Add driver for Amlogic Meson PWM controller This adds the driver for the PWM controller found in the Amlogic SoCs. This PWM is only a set of Gates, Dividers and Counters: PWM output is achieved by calculating a clock that permits calculating two periods (low and high). The counter then has to be set to switch after N cycles for the first half period. The hardware has no "polarity" setting. This driver reverses the period cycles (the low length is inverted with the high length) for PWM_POLARITY_INVERSED. Disabling the PWM stops the output immediately (without waiting for the current period to complete first). Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> |
#
0cf207ec |
|
27-Sep-2021 |
Wolfgang Denk <wd@denx.de> |
WS cleanup: remove SPACE(s) followed by TAB Signed-off-by: Wolfgang Denk <wd@denx.de> |
#
f10643cf |
|
19-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: core: Access device ofnode through functions At present ofnode is present in the device even if it is never used. With of-platdata this field is not used, so can be removed. In preparation for this, change the access to go through inline functions. Signed-off-by: Simon Glass <sjg@chromium.org> |
#
d1998a9f |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename ofdata_to_platdata() to of_to_plat() This name is far too long. Rename it to remove the 'data' bits. This makes it consistent with the platdata->plat rename. Signed-off-by: Simon Glass <sjg@chromium.org> |
#
41575d8e |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename auto_alloc_size members to be shorter This construct is quite long-winded. In earlier days it made some sense since auto-allocation was a strange concept. But with driver model now used pretty universally, we can shorten this to 'auto'. This reduces verbosity and makes it easier to read. Coincidentally it also ensures that every declaration is on one line, thus making dtoc's job easier. Signed-off-by: Simon Glass <sjg@chromium.org> |
#
2d481b2e |
|
01-Oct-2020 |
Neil Armstrong <narmstrong@baylibre.com> |
pwm: Add driver for Amlogic Meson PWM controller This adds the driver for the PWM controller found in the Amlogic SoCs. This PWM is only a set of Gates, Dividers and Counters: PWM output is achieved by calculating a clock that permits calculating two periods (low and high). The counter then has to be set to switch after N cycles for the first half period. The hardware has no "polarity" setting. This driver reverses the period cycles (the low length is inverted with the high length) for PWM_POLARITY_INVERSED. Disabling the PWM stops the output immediately (without waiting for the current period to complete first). Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> |
#
f10643cf |
|
19-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: core: Access device ofnode through functions At present ofnode is present in the device even if it is never used. With of-platdata this field is not used, so can be removed. In preparation for this, change the access to go through inline functions. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
d1998a9f |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename ofdata_to_platdata() to of_to_plat() This name is far too long. Rename it to remove the 'data' bits. This makes it consistent with the platdata->plat rename. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
41575d8e |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename auto_alloc_size members to be shorter This construct is quite long-winded. In earlier days it made some sense since auto-allocation was a strange concept. But with driver model now used pretty universally, we can shorten this to 'auto'. This reduces verbosity and makes it easier to read. Coincidentally it also ensures that every declaration is on one line, thus making dtoc's job easier. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
2d481b2e |
|
01-Oct-2020 |
Neil Armstrong <narmstrong@baylibre.com> |
pwm: Add driver for Amlogic Meson PWM controller This adds the driver for the PWM controller found in the Amlogic SoCs. This PWM is only a set of Gates, Dividers and Counters: PWM output is achieved by calculating a clock that permits calculating two periods (low and high). The counter then has to be set to switch after N cycles for the first half period. The hardware has no "polarity" setting. This driver reverses the period cycles (the low length is inverted with the high length) for PWM_POLARITY_INVERSED. Disabling the PWM stops the output immediately (without waiting for the current period to complete first). Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
|
#
f10643cf |
|
19-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: core: Access device ofnode through functions At present ofnode is present in the device even if it is never used. With of-platdata this field is not used, so can be removed. In preparation for this, change the access to go through inline functions. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
d1998a9f |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename ofdata_to_platdata() to of_to_plat() This name is far too long. Rename it to remove the 'data' bits. This makes it consistent with the platdata->plat rename. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
41575d8e |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename auto_alloc_size members to be shorter This construct is quite long-winded. In earlier days it made some sense since auto-allocation was a strange concept. But with driver model now used pretty universally, we can shorten this to 'auto'. This reduces verbosity and makes it easier to read. Coincidentally it also ensures that every declaration is on one line, thus making dtoc's job easier. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
2d481b2e |
|
01-Oct-2020 |
Neil Armstrong <narmstrong@baylibre.com> |
pwm: Add driver for Amlogic Meson PWM controller This adds the driver for the PWM controller found in the Amlogic SoCs. This PWM is only a set of Gates, Dividers and Counters: PWM output is achieved by calculating a clock that permits calculating two periods (low and high). The counter then has to be set to switch after N cycles for the first half period. The hardware has no "polarity" setting. This driver reverses the period cycles (the low length is inverted with the high length) for PWM_POLARITY_INVERSED. Disabling the PWM stops the output immediately (without waiting for the current period to complete first). Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
|
#
f10643cf |
|
19-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: core: Access device ofnode through functions At present ofnode is present in the device even if it is never used. With of-platdata this field is not used, so can be removed. In preparation for this, change the access to go through inline functions. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
d1998a9f |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename ofdata_to_platdata() to of_to_plat() This name is far too long. Rename it to remove the 'data' bits. This makes it consistent with the platdata->plat rename. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
41575d8e |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename auto_alloc_size members to be shorter This construct is quite long-winded. In earlier days it made some sense since auto-allocation was a strange concept. But with driver model now used pretty universally, we can shorten this to 'auto'. This reduces verbosity and makes it easier to read. Coincidentally it also ensures that every declaration is on one line, thus making dtoc's job easier. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
2d481b2e |
|
01-Oct-2020 |
Neil Armstrong <narmstrong@baylibre.com> |
pwm: Add driver for Amlogic Meson PWM controller This adds the driver for the PWM controller found in the Amlogic SoCs. This PWM is only a set of Gates, Dividers and Counters: PWM output is achieved by calculating a clock that permits calculating two periods (low and high). The counter then has to be set to switch after N cycles for the first half period. The hardware has no "polarity" setting. This driver reverses the period cycles (the low length is inverted with the high length) for PWM_POLARITY_INVERSED. Disabling the PWM stops the output immediately (without waiting for the current period to complete first). Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
|
#
f10643cf |
|
19-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: core: Access device ofnode through functions At present ofnode is present in the device even if it is never used. With of-platdata this field is not used, so can be removed. In preparation for this, change the access to go through inline functions. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
d1998a9f |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename ofdata_to_platdata() to of_to_plat() This name is far too long. Rename it to remove the 'data' bits. This makes it consistent with the platdata->plat rename. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
41575d8e |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename auto_alloc_size members to be shorter This construct is quite long-winded. In earlier days it made some sense since auto-allocation was a strange concept. But with driver model now used pretty universally, we can shorten this to 'auto'. This reduces verbosity and makes it easier to read. Coincidentally it also ensures that every declaration is on one line, thus making dtoc's job easier. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
2d481b2e |
|
01-Oct-2020 |
Neil Armstrong <narmstrong@baylibre.com> |
pwm: Add driver for Amlogic Meson PWM controller This adds the driver for the PWM controller found in the Amlogic SoCs. This PWM is only a set of Gates, Dividers and Counters: PWM output is achieved by calculating a clock that permits calculating two periods (low and high). The counter then has to be set to switch after N cycles for the first half period. The hardware has no "polarity" setting. This driver reverses the period cycles (the low length is inverted with the high length) for PWM_POLARITY_INVERSED. Disabling the PWM stops the output immediately (without waiting for the current period to complete first). Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
|
#
f10643cf |
|
19-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: core: Access device ofnode through functions At present ofnode is present in the device even if it is never used. With of-platdata this field is not used, so can be removed. In preparation for this, change the access to go through inline functions. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
d1998a9f |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename ofdata_to_platdata() to of_to_plat() This name is far too long. Rename it to remove the 'data' bits. This makes it consistent with the platdata->plat rename. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
41575d8e |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename auto_alloc_size members to be shorter This construct is quite long-winded. In earlier days it made some sense since auto-allocation was a strange concept. But with driver model now used pretty universally, we can shorten this to 'auto'. This reduces verbosity and makes it easier to read. Coincidentally it also ensures that every declaration is on one line, thus making dtoc's job easier. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
2d481b2e |
|
01-Oct-2020 |
Neil Armstrong <narmstrong@baylibre.com> |
pwm: Add driver for Amlogic Meson PWM controller This adds the driver for the PWM controller found in the Amlogic SoCs. This PWM is only a set of Gates, Dividers and Counters: PWM output is achieved by calculating a clock that permits calculating two periods (low and high). The counter then has to be set to switch after N cycles for the first half period. The hardware has no "polarity" setting. This driver reverses the period cycles (the low length is inverted with the high length) for PWM_POLARITY_INVERSED. Disabling the PWM stops the output immediately (without waiting for the current period to complete first). Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
|
#
f10643cf |
|
19-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: core: Access device ofnode through functions At present ofnode is present in the device even if it is never used. With of-platdata this field is not used, so can be removed. In preparation for this, change the access to go through inline functions. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
d1998a9f |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename ofdata_to_platdata() to of_to_plat() This name is far too long. Rename it to remove the 'data' bits. This makes it consistent with the platdata->plat rename. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
41575d8e |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename auto_alloc_size members to be shorter This construct is quite long-winded. In earlier days it made some sense since auto-allocation was a strange concept. But with driver model now used pretty universally, we can shorten this to 'auto'. This reduces verbosity and makes it easier to read. Coincidentally it also ensures that every declaration is on one line, thus making dtoc's job easier. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
2d481b2e |
|
01-Oct-2020 |
Neil Armstrong <narmstrong@baylibre.com> |
pwm: Add driver for Amlogic Meson PWM controller This adds the driver for the PWM controller found in the Amlogic SoCs. This PWM is only a set of Gates, Dividers and Counters: PWM output is achieved by calculating a clock that permits calculating two periods (low and high). The counter then has to be set to switch after N cycles for the first half period. The hardware has no "polarity" setting. This driver reverses the period cycles (the low length is inverted with the high length) for PWM_POLARITY_INVERSED. Disabling the PWM stops the output immediately (without waiting for the current period to complete first). Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
|
#
f10643cf |
|
19-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: core: Access device ofnode through functions At present ofnode is present in the device even if it is never used. With of-platdata this field is not used, so can be removed. In preparation for this, change the access to go through inline functions. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
d1998a9f |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename ofdata_to_platdata() to of_to_plat() This name is far too long. Rename it to remove the 'data' bits. This makes it consistent with the platdata->plat rename. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
41575d8e |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename auto_alloc_size members to be shorter This construct is quite long-winded. In earlier days it made some sense since auto-allocation was a strange concept. But with driver model now used pretty universally, we can shorten this to 'auto'. This reduces verbosity and makes it easier to read. Coincidentally it also ensures that every declaration is on one line, thus making dtoc's job easier. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
2d481b2e |
|
01-Oct-2020 |
Neil Armstrong <narmstrong@baylibre.com> |
pwm: Add driver for Amlogic Meson PWM controller This adds the driver for the PWM controller found in the Amlogic SoCs. This PWM is only a set of Gates, Dividers and Counters: PWM output is achieved by calculating a clock that permits calculating two periods (low and high). The counter then has to be set to switch after N cycles for the first half period. The hardware has no "polarity" setting. This driver reverses the period cycles (the low length is inverted with the high length) for PWM_POLARITY_INVERSED. Disabling the PWM stops the output immediately (without waiting for the current period to complete first). Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
|
#
f10643cf |
|
19-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: core: Access device ofnode through functions At present ofnode is present in the device even if it is never used. With of-platdata this field is not used, so can be removed. In preparation for this, change the access to go through inline functions. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
d1998a9f |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename ofdata_to_platdata() to of_to_plat() This name is far too long. Rename it to remove the 'data' bits. This makes it consistent with the platdata->plat rename. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
41575d8e |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename auto_alloc_size members to be shorter This construct is quite long-winded. In earlier days it made some sense since auto-allocation was a strange concept. But with driver model now used pretty universally, we can shorten this to 'auto'. This reduces verbosity and makes it easier to read. Coincidentally it also ensures that every declaration is on one line, thus making dtoc's job easier. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
2d481b2e |
|
01-Oct-2020 |
Neil Armstrong <narmstrong@baylibre.com> |
pwm: Add driver for Amlogic Meson PWM controller This adds the driver for the PWM controller found in the Amlogic SoCs. This PWM is only a set of Gates, Dividers and Counters: PWM output is achieved by calculating a clock that permits calculating two periods (low and high). The counter then has to be set to switch after N cycles for the first half period. The hardware has no "polarity" setting. This driver reverses the period cycles (the low length is inverted with the high length) for PWM_POLARITY_INVERSED. Disabling the PWM stops the output immediately (without waiting for the current period to complete first). Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
|
#
f10643cf |
|
19-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: core: Access device ofnode through functions At present ofnode is present in the device even if it is never used. With of-platdata this field is not used, so can be removed. In preparation for this, change the access to go through inline functions. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
d1998a9f |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename ofdata_to_platdata() to of_to_plat() This name is far too long. Rename it to remove the 'data' bits. This makes it consistent with the platdata->plat rename. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
41575d8e |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename auto_alloc_size members to be shorter This construct is quite long-winded. In earlier days it made some sense since auto-allocation was a strange concept. But with driver model now used pretty universally, we can shorten this to 'auto'. This reduces verbosity and makes it easier to read. Coincidentally it also ensures that every declaration is on one line, thus making dtoc's job easier. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
2d481b2e |
|
01-Oct-2020 |
Neil Armstrong <narmstrong@baylibre.com> |
pwm: Add driver for Amlogic Meson PWM controller This adds the driver for the PWM controller found in the Amlogic SoCs. This PWM is only a set of Gates, Dividers and Counters: PWM output is achieved by calculating a clock that permits calculating two periods (low and high). The counter then has to be set to switch after N cycles for the first half period. The hardware has no "polarity" setting. This driver reverses the period cycles (the low length is inverted with the high length) for PWM_POLARITY_INVERSED. Disabling the PWM stops the output immediately (without waiting for the current period to complete first). Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
|
#
f10643cf |
|
19-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: core: Access device ofnode through functions At present ofnode is present in the device even if it is never used. With of-platdata this field is not used, so can be removed. In preparation for this, change the access to go through inline functions. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
d1998a9f |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename ofdata_to_platdata() to of_to_plat() This name is far too long. Rename it to remove the 'data' bits. This makes it consistent with the platdata->plat rename. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
41575d8e |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename auto_alloc_size members to be shorter This construct is quite long-winded. In earlier days it made some sense since auto-allocation was a strange concept. But with driver model now used pretty universally, we can shorten this to 'auto'. This reduces verbosity and makes it easier to read. Coincidentally it also ensures that every declaration is on one line, thus making dtoc's job easier. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
2d481b2e |
|
01-Oct-2020 |
Neil Armstrong <narmstrong@baylibre.com> |
pwm: Add driver for Amlogic Meson PWM controller This adds the driver for the PWM controller found in the Amlogic SoCs. This PWM is only a set of Gates, Dividers and Counters: PWM output is achieved by calculating a clock that permits calculating two periods (low and high). The counter then has to be set to switch after N cycles for the first half period. The hardware has no "polarity" setting. This driver reverses the period cycles (the low length is inverted with the high length) for PWM_POLARITY_INVERSED. Disabling the PWM stops the output immediately (without waiting for the current period to complete first). Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
|
#
f10643cf |
|
19-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: core: Access device ofnode through functions At present ofnode is present in the device even if it is never used. With of-platdata this field is not used, so can be removed. In preparation for this, change the access to go through inline functions. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
d1998a9f |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename ofdata_to_platdata() to of_to_plat() This name is far too long. Rename it to remove the 'data' bits. This makes it consistent with the platdata->plat rename. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
41575d8e |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename auto_alloc_size members to be shorter This construct is quite long-winded. In earlier days it made some sense since auto-allocation was a strange concept. But with driver model now used pretty universally, we can shorten this to 'auto'. This reduces verbosity and makes it easier to read. Coincidentally it also ensures that every declaration is on one line, thus making dtoc's job easier. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
2d481b2e |
|
01-Oct-2020 |
Neil Armstrong <narmstrong@baylibre.com> |
pwm: Add driver for Amlogic Meson PWM controller This adds the driver for the PWM controller found in the Amlogic SoCs. This PWM is only a set of Gates, Dividers and Counters: PWM output is achieved by calculating a clock that permits calculating two periods (low and high). The counter then has to be set to switch after N cycles for the first half period. The hardware has no "polarity" setting. This driver reverses the period cycles (the low length is inverted with the high length) for PWM_POLARITY_INVERSED. Disabling the PWM stops the output immediately (without waiting for the current period to complete first). Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
|
#
f10643cf |
|
19-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: core: Access device ofnode through functions At present ofnode is present in the device even if it is never used. With of-platdata this field is not used, so can be removed. In preparation for this, change the access to go through inline functions. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
d1998a9f |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename ofdata_to_platdata() to of_to_plat() This name is far too long. Rename it to remove the 'data' bits. This makes it consistent with the platdata->plat rename. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
41575d8e |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename auto_alloc_size members to be shorter This construct is quite long-winded. In earlier days it made some sense since auto-allocation was a strange concept. But with driver model now used pretty universally, we can shorten this to 'auto'. This reduces verbosity and makes it easier to read. Coincidentally it also ensures that every declaration is on one line, thus making dtoc's job easier. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
2d481b2e |
|
01-Oct-2020 |
Neil Armstrong <narmstrong@baylibre.com> |
pwm: Add driver for Amlogic Meson PWM controller This adds the driver for the PWM controller found in the Amlogic SoCs. This PWM is only a set of Gates, Dividers and Counters: PWM output is achieved by calculating a clock that permits calculating two periods (low and high). The counter then has to be set to switch after N cycles for the first half period. The hardware has no "polarity" setting. This driver reverses the period cycles (the low length is inverted with the high length) for PWM_POLARITY_INVERSED. Disabling the PWM stops the output immediately (without waiting for the current period to complete first). Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
|
#
f10643cf |
|
19-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: core: Access device ofnode through functions At present ofnode is present in the device even if it is never used. With of-platdata this field is not used, so can be removed. In preparation for this, change the access to go through inline functions. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
d1998a9f |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename ofdata_to_platdata() to of_to_plat() This name is far too long. Rename it to remove the 'data' bits. This makes it consistent with the platdata->plat rename. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
41575d8e |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename auto_alloc_size members to be shorter This construct is quite long-winded. In earlier days it made some sense since auto-allocation was a strange concept. But with driver model now used pretty universally, we can shorten this to 'auto'. This reduces verbosity and makes it easier to read. Coincidentally it also ensures that every declaration is on one line, thus making dtoc's job easier. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
2d481b2e |
|
01-Oct-2020 |
Neil Armstrong <narmstrong@baylibre.com> |
pwm: Add driver for Amlogic Meson PWM controller This adds the driver for the PWM controller found in the Amlogic SoCs. This PWM is only a set of Gates, Dividers and Counters: PWM output is achieved by calculating a clock that permits calculating two periods (low and high). The counter then has to be set to switch after N cycles for the first half period. The hardware has no "polarity" setting. This driver reverses the period cycles (the low length is inverted with the high length) for PWM_POLARITY_INVERSED. Disabling the PWM stops the output immediately (without waiting for the current period to complete first). Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
|
#
f10643cf |
|
19-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: core: Access device ofnode through functions At present ofnode is present in the device even if it is never used. With of-platdata this field is not used, so can be removed. In preparation for this, change the access to go through inline functions. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
d1998a9f |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename ofdata_to_platdata() to of_to_plat() This name is far too long. Rename it to remove the 'data' bits. This makes it consistent with the platdata->plat rename. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
41575d8e |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename auto_alloc_size members to be shorter This construct is quite long-winded. In earlier days it made some sense since auto-allocation was a strange concept. But with driver model now used pretty universally, we can shorten this to 'auto'. This reduces verbosity and makes it easier to read. Coincidentally it also ensures that every declaration is on one line, thus making dtoc's job easier. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
2d481b2e |
|
01-Oct-2020 |
Neil Armstrong <narmstrong@baylibre.com> |
pwm: Add driver for Amlogic Meson PWM controller This adds the driver for the PWM controller found in the Amlogic SoCs. This PWM is only a set of Gates, Dividers and Counters: PWM output is achieved by calculating a clock that permits calculating two periods (low and high). The counter then has to be set to switch after N cycles for the first half period. The hardware has no "polarity" setting. This driver reverses the period cycles (the low length is inverted with the high length) for PWM_POLARITY_INVERSED. Disabling the PWM stops the output immediately (without waiting for the current period to complete first). Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
|
#
f10643cf |
|
19-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: core: Access device ofnode through functions At present ofnode is present in the device even if it is never used. With of-platdata this field is not used, so can be removed. In preparation for this, change the access to go through inline functions. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
d1998a9f |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename ofdata_to_platdata() to of_to_plat() This name is far too long. Rename it to remove the 'data' bits. This makes it consistent with the platdata->plat rename. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
41575d8e |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename auto_alloc_size members to be shorter This construct is quite long-winded. In earlier days it made some sense since auto-allocation was a strange concept. But with driver model now used pretty universally, we can shorten this to 'auto'. This reduces verbosity and makes it easier to read. Coincidentally it also ensures that every declaration is on one line, thus making dtoc's job easier. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
2d481b2e |
|
01-Oct-2020 |
Neil Armstrong <narmstrong@baylibre.com> |
pwm: Add driver for Amlogic Meson PWM controller This adds the driver for the PWM controller found in the Amlogic SoCs. This PWM is only a set of Gates, Dividers and Counters: PWM output is achieved by calculating a clock that permits calculating two periods (low and high). The counter then has to be set to switch after N cycles for the first half period. The hardware has no "polarity" setting. This driver reverses the period cycles (the low length is inverted with the high length) for PWM_POLARITY_INVERSED. Disabling the PWM stops the output immediately (without waiting for the current period to complete first). Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
|
#
f10643cf |
|
19-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: core: Access device ofnode through functions At present ofnode is present in the device even if it is never used. With of-platdata this field is not used, so can be removed. In preparation for this, change the access to go through inline functions. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
d1998a9f |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename ofdata_to_platdata() to of_to_plat() This name is far too long. Rename it to remove the 'data' bits. This makes it consistent with the platdata->plat rename. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
41575d8e |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename auto_alloc_size members to be shorter This construct is quite long-winded. In earlier days it made some sense since auto-allocation was a strange concept. But with driver model now used pretty universally, we can shorten this to 'auto'. This reduces verbosity and makes it easier to read. Coincidentally it also ensures that every declaration is on one line, thus making dtoc's job easier. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
2d481b2e |
|
01-Oct-2020 |
Neil Armstrong <narmstrong@baylibre.com> |
pwm: Add driver for Amlogic Meson PWM controller This adds the driver for the PWM controller found in the Amlogic SoCs. This PWM is only a set of Gates, Dividers and Counters: PWM output is achieved by calculating a clock that permits calculating two periods (low and high). The counter then has to be set to switch after N cycles for the first half period. The hardware has no "polarity" setting. This driver reverses the period cycles (the low length is inverted with the high length) for PWM_POLARITY_INVERSED. Disabling the PWM stops the output immediately (without waiting for the current period to complete first). Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
|
#
f10643cf |
|
19-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: core: Access device ofnode through functions At present ofnode is present in the device even if it is never used. With of-platdata this field is not used, so can be removed. In preparation for this, change the access to go through inline functions. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
d1998a9f |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename ofdata_to_platdata() to of_to_plat() This name is far too long. Rename it to remove the 'data' bits. This makes it consistent with the platdata->plat rename. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
41575d8e |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename auto_alloc_size members to be shorter This construct is quite long-winded. In earlier days it made some sense since auto-allocation was a strange concept. But with driver model now used pretty universally, we can shorten this to 'auto'. This reduces verbosity and makes it easier to read. Coincidentally it also ensures that every declaration is on one line, thus making dtoc's job easier. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
2d481b2e |
|
01-Oct-2020 |
Neil Armstrong <narmstrong@baylibre.com> |
pwm: Add driver for Amlogic Meson PWM controller This adds the driver for the PWM controller found in the Amlogic SoCs. This PWM is only a set of Gates, Dividers and Counters: PWM output is achieved by calculating a clock that permits calculating two periods (low and high). The counter then has to be set to switch after N cycles for the first half period. The hardware has no "polarity" setting. This driver reverses the period cycles (the low length is inverted with the high length) for PWM_POLARITY_INVERSED. Disabling the PWM stops the output immediately (without waiting for the current period to complete first). Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
|
#
f10643cf |
|
19-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: core: Access device ofnode through functions At present ofnode is present in the device even if it is never used. With of-platdata this field is not used, so can be removed. In preparation for this, change the access to go through inline functions. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
d1998a9f |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename ofdata_to_platdata() to of_to_plat() This name is far too long. Rename it to remove the 'data' bits. This makes it consistent with the platdata->plat rename. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
41575d8e |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename auto_alloc_size members to be shorter This construct is quite long-winded. In earlier days it made some sense since auto-allocation was a strange concept. But with driver model now used pretty universally, we can shorten this to 'auto'. This reduces verbosity and makes it easier to read. Coincidentally it also ensures that every declaration is on one line, thus making dtoc's job easier. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
2d481b2e |
|
01-Oct-2020 |
Neil Armstrong <narmstrong@baylibre.com> |
pwm: Add driver for Amlogic Meson PWM controller This adds the driver for the PWM controller found in the Amlogic SoCs. This PWM is only a set of Gates, Dividers and Counters: PWM output is achieved by calculating a clock that permits calculating two periods (low and high). The counter then has to be set to switch after N cycles for the first half period. The hardware has no "polarity" setting. This driver reverses the period cycles (the low length is inverted with the high length) for PWM_POLARITY_INVERSED. Disabling the PWM stops the output immediately (without waiting for the current period to complete first). Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
|
#
f10643cf |
|
19-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: core: Access device ofnode through functions At present ofnode is present in the device even if it is never used. With of-platdata this field is not used, so can be removed. In preparation for this, change the access to go through inline functions. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
d1998a9f |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename ofdata_to_platdata() to of_to_plat() This name is far too long. Rename it to remove the 'data' bits. This makes it consistent with the platdata->plat rename. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
41575d8e |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename auto_alloc_size members to be shorter This construct is quite long-winded. In earlier days it made some sense since auto-allocation was a strange concept. But with driver model now used pretty universally, we can shorten this to 'auto'. This reduces verbosity and makes it easier to read. Coincidentally it also ensures that every declaration is on one line, thus making dtoc's job easier. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
2d481b2e |
|
01-Oct-2020 |
Neil Armstrong <narmstrong@baylibre.com> |
pwm: Add driver for Amlogic Meson PWM controller This adds the driver for the PWM controller found in the Amlogic SoCs. This PWM is only a set of Gates, Dividers and Counters: PWM output is achieved by calculating a clock that permits calculating two periods (low and high). The counter then has to be set to switch after N cycles for the first half period. The hardware has no "polarity" setting. This driver reverses the period cycles (the low length is inverted with the high length) for PWM_POLARITY_INVERSED. Disabling the PWM stops the output immediately (without waiting for the current period to complete first). Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
|
#
f10643cf |
|
19-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: core: Access device ofnode through functions At present ofnode is present in the device even if it is never used. With of-platdata this field is not used, so can be removed. In preparation for this, change the access to go through inline functions. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
d1998a9f |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename ofdata_to_platdata() to of_to_plat() This name is far too long. Rename it to remove the 'data' bits. This makes it consistent with the platdata->plat rename. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
41575d8e |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename auto_alloc_size members to be shorter This construct is quite long-winded. In earlier days it made some sense since auto-allocation was a strange concept. But with driver model now used pretty universally, we can shorten this to 'auto'. This reduces verbosity and makes it easier to read. Coincidentally it also ensures that every declaration is on one line, thus making dtoc's job easier. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
2d481b2e |
|
01-Oct-2020 |
Neil Armstrong <narmstrong@baylibre.com> |
pwm: Add driver for Amlogic Meson PWM controller This adds the driver for the PWM controller found in the Amlogic SoCs. This PWM is only a set of Gates, Dividers and Counters: PWM output is achieved by calculating a clock that permits calculating two periods (low and high). The counter then has to be set to switch after N cycles for the first half period. The hardware has no "polarity" setting. This driver reverses the period cycles (the low length is inverted with the high length) for PWM_POLARITY_INVERSED. Disabling the PWM stops the output immediately (without waiting for the current period to complete first). Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
|
#
f10643cf |
|
19-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: core: Access device ofnode through functions At present ofnode is present in the device even if it is never used. With of-platdata this field is not used, so can be removed. In preparation for this, change the access to go through inline functions. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
d1998a9f |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename ofdata_to_platdata() to of_to_plat() This name is far too long. Rename it to remove the 'data' bits. This makes it consistent with the platdata->plat rename. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
41575d8e |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename auto_alloc_size members to be shorter This construct is quite long-winded. In earlier days it made some sense since auto-allocation was a strange concept. But with driver model now used pretty universally, we can shorten this to 'auto'. This reduces verbosity and makes it easier to read. Coincidentally it also ensures that every declaration is on one line, thus making dtoc's job easier. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
2d481b2e |
|
01-Oct-2020 |
Neil Armstrong <narmstrong@baylibre.com> |
pwm: Add driver for Amlogic Meson PWM controller This adds the driver for the PWM controller found in the Amlogic SoCs. This PWM is only a set of Gates, Dividers and Counters: PWM output is achieved by calculating a clock that permits calculating two periods (low and high). The counter then has to be set to switch after N cycles for the first half period. The hardware has no "polarity" setting. This driver reverses the period cycles (the low length is inverted with the high length) for PWM_POLARITY_INVERSED. Disabling the PWM stops the output immediately (without waiting for the current period to complete first). Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
|
#
f10643cf |
|
19-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: core: Access device ofnode through functions At present ofnode is present in the device even if it is never used. With of-platdata this field is not used, so can be removed. In preparation for this, change the access to go through inline functions. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
d1998a9f |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename ofdata_to_platdata() to of_to_plat() This name is far too long. Rename it to remove the 'data' bits. This makes it consistent with the platdata->plat rename. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
41575d8e |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename auto_alloc_size members to be shorter This construct is quite long-winded. In earlier days it made some sense since auto-allocation was a strange concept. But with driver model now used pretty universally, we can shorten this to 'auto'. This reduces verbosity and makes it easier to read. Coincidentally it also ensures that every declaration is on one line, thus making dtoc's job easier. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
2d481b2e |
|
01-Oct-2020 |
Neil Armstrong <narmstrong@baylibre.com> |
pwm: Add driver for Amlogic Meson PWM controller This adds the driver for the PWM controller found in the Amlogic SoCs. This PWM is only a set of Gates, Dividers and Counters: PWM output is achieved by calculating a clock that permits calculating two periods (low and high). The counter then has to be set to switch after N cycles for the first half period. The hardware has no "polarity" setting. This driver reverses the period cycles (the low length is inverted with the high length) for PWM_POLARITY_INVERSED. Disabling the PWM stops the output immediately (without waiting for the current period to complete first). Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
|
#
f10643cf |
|
19-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: core: Access device ofnode through functions At present ofnode is present in the device even if it is never used. With of-platdata this field is not used, so can be removed. In preparation for this, change the access to go through inline functions. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
d1998a9f |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename ofdata_to_platdata() to of_to_plat() This name is far too long. Rename it to remove the 'data' bits. This makes it consistent with the platdata->plat rename. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
41575d8e |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename auto_alloc_size members to be shorter This construct is quite long-winded. In earlier days it made some sense since auto-allocation was a strange concept. But with driver model now used pretty universally, we can shorten this to 'auto'. This reduces verbosity and makes it easier to read. Coincidentally it also ensures that every declaration is on one line, thus making dtoc's job easier. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
2d481b2e |
|
01-Oct-2020 |
Neil Armstrong <narmstrong@baylibre.com> |
pwm: Add driver for Amlogic Meson PWM controller This adds the driver for the PWM controller found in the Amlogic SoCs. This PWM is only a set of Gates, Dividers and Counters: PWM output is achieved by calculating a clock that permits calculating two periods (low and high). The counter then has to be set to switch after N cycles for the first half period. The hardware has no "polarity" setting. This driver reverses the period cycles (the low length is inverted with the high length) for PWM_POLARITY_INVERSED. Disabling the PWM stops the output immediately (without waiting for the current period to complete first). Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
|
#
f10643cf |
|
19-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: core: Access device ofnode through functions At present ofnode is present in the device even if it is never used. With of-platdata this field is not used, so can be removed. In preparation for this, change the access to go through inline functions. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
d1998a9f |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename ofdata_to_platdata() to of_to_plat() This name is far too long. Rename it to remove the 'data' bits. This makes it consistent with the platdata->plat rename. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
41575d8e |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename auto_alloc_size members to be shorter This construct is quite long-winded. In earlier days it made some sense since auto-allocation was a strange concept. But with driver model now used pretty universally, we can shorten this to 'auto'. This reduces verbosity and makes it easier to read. Coincidentally it also ensures that every declaration is on one line, thus making dtoc's job easier. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
2d481b2e |
|
01-Oct-2020 |
Neil Armstrong <narmstrong@baylibre.com> |
pwm: Add driver for Amlogic Meson PWM controller This adds the driver for the PWM controller found in the Amlogic SoCs. This PWM is only a set of Gates, Dividers and Counters: PWM output is achieved by calculating a clock that permits calculating two periods (low and high). The counter then has to be set to switch after N cycles for the first half period. The hardware has no "polarity" setting. This driver reverses the period cycles (the low length is inverted with the high length) for PWM_POLARITY_INVERSED. Disabling the PWM stops the output immediately (without waiting for the current period to complete first). Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
|
#
f10643cf |
|
19-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: core: Access device ofnode through functions At present ofnode is present in the device even if it is never used. With of-platdata this field is not used, so can be removed. In preparation for this, change the access to go through inline functions. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
d1998a9f |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename ofdata_to_platdata() to of_to_plat() This name is far too long. Rename it to remove the 'data' bits. This makes it consistent with the platdata->plat rename. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
41575d8e |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename auto_alloc_size members to be shorter This construct is quite long-winded. In earlier days it made some sense since auto-allocation was a strange concept. But with driver model now used pretty universally, we can shorten this to 'auto'. This reduces verbosity and makes it easier to read. Coincidentally it also ensures that every declaration is on one line, thus making dtoc's job easier. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
2d481b2e |
|
01-Oct-2020 |
Neil Armstrong <narmstrong@baylibre.com> |
pwm: Add driver for Amlogic Meson PWM controller This adds the driver for the PWM controller found in the Amlogic SoCs. This PWM is only a set of Gates, Dividers and Counters: PWM output is achieved by calculating a clock that permits calculating two periods (low and high). The counter then has to be set to switch after N cycles for the first half period. The hardware has no "polarity" setting. This driver reverses the period cycles (the low length is inverted with the high length) for PWM_POLARITY_INVERSED. Disabling the PWM stops the output immediately (without waiting for the current period to complete first). Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
|
#
f10643cf |
|
19-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: core: Access device ofnode through functions At present ofnode is present in the device even if it is never used. With of-platdata this field is not used, so can be removed. In preparation for this, change the access to go through inline functions. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
d1998a9f |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename ofdata_to_platdata() to of_to_plat() This name is far too long. Rename it to remove the 'data' bits. This makes it consistent with the platdata->plat rename. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
41575d8e |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename auto_alloc_size members to be shorter This construct is quite long-winded. In earlier days it made some sense since auto-allocation was a strange concept. But with driver model now used pretty universally, we can shorten this to 'auto'. This reduces verbosity and makes it easier to read. Coincidentally it also ensures that every declaration is on one line, thus making dtoc's job easier. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
2d481b2e |
|
01-Oct-2020 |
Neil Armstrong <narmstrong@baylibre.com> |
pwm: Add driver for Amlogic Meson PWM controller This adds the driver for the PWM controller found in the Amlogic SoCs. This PWM is only a set of Gates, Dividers and Counters: PWM output is achieved by calculating a clock that permits calculating two periods (low and high). The counter then has to be set to switch after N cycles for the first half period. The hardware has no "polarity" setting. This driver reverses the period cycles (the low length is inverted with the high length) for PWM_POLARITY_INVERSED. Disabling the PWM stops the output immediately (without waiting for the current period to complete first). Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
|
#
f10643cf |
|
19-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: core: Access device ofnode through functions At present ofnode is present in the device even if it is never used. With of-platdata this field is not used, so can be removed. In preparation for this, change the access to go through inline functions. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
d1998a9f |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename ofdata_to_platdata() to of_to_plat() This name is far too long. Rename it to remove the 'data' bits. This makes it consistent with the platdata->plat rename. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
41575d8e |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename auto_alloc_size members to be shorter This construct is quite long-winded. In earlier days it made some sense since auto-allocation was a strange concept. But with driver model now used pretty universally, we can shorten this to 'auto'. This reduces verbosity and makes it easier to read. Coincidentally it also ensures that every declaration is on one line, thus making dtoc's job easier. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
2d481b2e |
|
01-Oct-2020 |
Neil Armstrong <narmstrong@baylibre.com> |
pwm: Add driver for Amlogic Meson PWM controller This adds the driver for the PWM controller found in the Amlogic SoCs. This PWM is only a set of Gates, Dividers and Counters: PWM output is achieved by calculating a clock that permits calculating two periods (low and high). The counter then has to be set to switch after N cycles for the first half period. The hardware has no "polarity" setting. This driver reverses the period cycles (the low length is inverted with the high length) for PWM_POLARITY_INVERSED. Disabling the PWM stops the output immediately (without waiting for the current period to complete first). Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
|
#
f10643cf |
|
19-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: core: Access device ofnode through functions At present ofnode is present in the device even if it is never used. With of-platdata this field is not used, so can be removed. In preparation for this, change the access to go through inline functions. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
d1998a9f |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename ofdata_to_platdata() to of_to_plat() This name is far too long. Rename it to remove the 'data' bits. This makes it consistent with the platdata->plat rename. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
41575d8e |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename auto_alloc_size members to be shorter This construct is quite long-winded. In earlier days it made some sense since auto-allocation was a strange concept. But with driver model now used pretty universally, we can shorten this to 'auto'. This reduces verbosity and makes it easier to read. Coincidentally it also ensures that every declaration is on one line, thus making dtoc's job easier. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
2d481b2e |
|
01-Oct-2020 |
Neil Armstrong <narmstrong@baylibre.com> |
pwm: Add driver for Amlogic Meson PWM controller This adds the driver for the PWM controller found in the Amlogic SoCs. This PWM is only a set of Gates, Dividers and Counters: PWM output is achieved by calculating a clock that permits calculating two periods (low and high). The counter then has to be set to switch after N cycles for the first half period. The hardware has no "polarity" setting. This driver reverses the period cycles (the low length is inverted with the high length) for PWM_POLARITY_INVERSED. Disabling the PWM stops the output immediately (without waiting for the current period to complete first). Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
|
#
f10643cf |
|
19-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: core: Access device ofnode through functions At present ofnode is present in the device even if it is never used. With of-platdata this field is not used, so can be removed. In preparation for this, change the access to go through inline functions. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
d1998a9f |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename ofdata_to_platdata() to of_to_plat() This name is far too long. Rename it to remove the 'data' bits. This makes it consistent with the platdata->plat rename. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
41575d8e |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename auto_alloc_size members to be shorter This construct is quite long-winded. In earlier days it made some sense since auto-allocation was a strange concept. But with driver model now used pretty universally, we can shorten this to 'auto'. This reduces verbosity and makes it easier to read. Coincidentally it also ensures that every declaration is on one line, thus making dtoc's job easier. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
2d481b2e |
|
01-Oct-2020 |
Neil Armstrong <narmstrong@baylibre.com> |
pwm: Add driver for Amlogic Meson PWM controller This adds the driver for the PWM controller found in the Amlogic SoCs. This PWM is only a set of Gates, Dividers and Counters: PWM output is achieved by calculating a clock that permits calculating two periods (low and high). The counter then has to be set to switch after N cycles for the first half period. The hardware has no "polarity" setting. This driver reverses the period cycles (the low length is inverted with the high length) for PWM_POLARITY_INVERSED. Disabling the PWM stops the output immediately (without waiting for the current period to complete first). Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
|
#
f10643cf |
|
19-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: core: Access device ofnode through functions At present ofnode is present in the device even if it is never used. With of-platdata this field is not used, so can be removed. In preparation for this, change the access to go through inline functions. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
d1998a9f |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename ofdata_to_platdata() to of_to_plat() This name is far too long. Rename it to remove the 'data' bits. This makes it consistent with the platdata->plat rename. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
41575d8e |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename auto_alloc_size members to be shorter This construct is quite long-winded. In earlier days it made some sense since auto-allocation was a strange concept. But with driver model now used pretty universally, we can shorten this to 'auto'. This reduces verbosity and makes it easier to read. Coincidentally it also ensures that every declaration is on one line, thus making dtoc's job easier. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
2d481b2e |
|
01-Oct-2020 |
Neil Armstrong <narmstrong@baylibre.com> |
pwm: Add driver for Amlogic Meson PWM controller This adds the driver for the PWM controller found in the Amlogic SoCs. This PWM is only a set of Gates, Dividers and Counters: PWM output is achieved by calculating a clock that permits calculating two periods (low and high). The counter then has to be set to switch after N cycles for the first half period. The hardware has no "polarity" setting. This driver reverses the period cycles (the low length is inverted with the high length) for PWM_POLARITY_INVERSED. Disabling the PWM stops the output immediately (without waiting for the current period to complete first). Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
|
#
f10643cf |
|
19-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: core: Access device ofnode through functions At present ofnode is present in the device even if it is never used. With of-platdata this field is not used, so can be removed. In preparation for this, change the access to go through inline functions. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
d1998a9f |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename ofdata_to_platdata() to of_to_plat() This name is far too long. Rename it to remove the 'data' bits. This makes it consistent with the platdata->plat rename. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
41575d8e |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename auto_alloc_size members to be shorter This construct is quite long-winded. In earlier days it made some sense since auto-allocation was a strange concept. But with driver model now used pretty universally, we can shorten this to 'auto'. This reduces verbosity and makes it easier to read. Coincidentally it also ensures that every declaration is on one line, thus making dtoc's job easier. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
2d481b2e |
|
01-Oct-2020 |
Neil Armstrong <narmstrong@baylibre.com> |
pwm: Add driver for Amlogic Meson PWM controller This adds the driver for the PWM controller found in the Amlogic SoCs. This PWM is only a set of Gates, Dividers and Counters: PWM output is achieved by calculating a clock that permits calculating two periods (low and high). The counter then has to be set to switch after N cycles for the first half period. The hardware has no "polarity" setting. This driver reverses the period cycles (the low length is inverted with the high length) for PWM_POLARITY_INVERSED. Disabling the PWM stops the output immediately (without waiting for the current period to complete first). Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
|
#
f10643cf |
|
19-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: core: Access device ofnode through functions At present ofnode is present in the device even if it is never used. With of-platdata this field is not used, so can be removed. In preparation for this, change the access to go through inline functions. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
d1998a9f |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename ofdata_to_platdata() to of_to_plat() This name is far too long. Rename it to remove the 'data' bits. This makes it consistent with the platdata->plat rename. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
41575d8e |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename auto_alloc_size members to be shorter This construct is quite long-winded. In earlier days it made some sense since auto-allocation was a strange concept. But with driver model now used pretty universally, we can shorten this to 'auto'. This reduces verbosity and makes it easier to read. Coincidentally it also ensures that every declaration is on one line, thus making dtoc's job easier. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
2d481b2e |
|
01-Oct-2020 |
Neil Armstrong <narmstrong@baylibre.com> |
pwm: Add driver for Amlogic Meson PWM controller This adds the driver for the PWM controller found in the Amlogic SoCs. This PWM is only a set of Gates, Dividers and Counters: PWM output is achieved by calculating a clock that permits calculating two periods (low and high). The counter then has to be set to switch after N cycles for the first half period. The hardware has no "polarity" setting. This driver reverses the period cycles (the low length is inverted with the high length) for PWM_POLARITY_INVERSED. Disabling the PWM stops the output immediately (without waiting for the current period to complete first). Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
|
#
f10643cf |
|
19-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: core: Access device ofnode through functions At present ofnode is present in the device even if it is never used. With of-platdata this field is not used, so can be removed. In preparation for this, change the access to go through inline functions. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
d1998a9f |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename ofdata_to_platdata() to of_to_plat() This name is far too long. Rename it to remove the 'data' bits. This makes it consistent with the platdata->plat rename. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
41575d8e |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename auto_alloc_size members to be shorter This construct is quite long-winded. In earlier days it made some sense since auto-allocation was a strange concept. But with driver model now used pretty universally, we can shorten this to 'auto'. This reduces verbosity and makes it easier to read. Coincidentally it also ensures that every declaration is on one line, thus making dtoc's job easier. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
2d481b2e |
|
01-Oct-2020 |
Neil Armstrong <narmstrong@baylibre.com> |
pwm: Add driver for Amlogic Meson PWM controller This adds the driver for the PWM controller found in the Amlogic SoCs. This PWM is only a set of Gates, Dividers and Counters: PWM output is achieved by calculating a clock that permits calculating two periods (low and high). The counter then has to be set to switch after N cycles for the first half period. The hardware has no "polarity" setting. This driver reverses the period cycles (the low length is inverted with the high length) for PWM_POLARITY_INVERSED. Disabling the PWM stops the output immediately (without waiting for the current period to complete first). Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
|
#
f10643cf |
|
19-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: core: Access device ofnode through functions At present ofnode is present in the device even if it is never used. With of-platdata this field is not used, so can be removed. In preparation for this, change the access to go through inline functions. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
d1998a9f |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename ofdata_to_platdata() to of_to_plat() This name is far too long. Rename it to remove the 'data' bits. This makes it consistent with the platdata->plat rename. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
41575d8e |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename auto_alloc_size members to be shorter This construct is quite long-winded. In earlier days it made some sense since auto-allocation was a strange concept. But with driver model now used pretty universally, we can shorten this to 'auto'. This reduces verbosity and makes it easier to read. Coincidentally it also ensures that every declaration is on one line, thus making dtoc's job easier. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
2d481b2e |
|
01-Oct-2020 |
Neil Armstrong <narmstrong@baylibre.com> |
pwm: Add driver for Amlogic Meson PWM controller This adds the driver for the PWM controller found in the Amlogic SoCs. This PWM is only a set of Gates, Dividers and Counters: PWM output is achieved by calculating a clock that permits calculating two periods (low and high). The counter then has to be set to switch after N cycles for the first half period. The hardware has no "polarity" setting. This driver reverses the period cycles (the low length is inverted with the high length) for PWM_POLARITY_INVERSED. Disabling the PWM stops the output immediately (without waiting for the current period to complete first). Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
|
#
f10643cf |
|
19-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: core: Access device ofnode through functions At present ofnode is present in the device even if it is never used. With of-platdata this field is not used, so can be removed. In preparation for this, change the access to go through inline functions. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
d1998a9f |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename ofdata_to_platdata() to of_to_plat() This name is far too long. Rename it to remove the 'data' bits. This makes it consistent with the platdata->plat rename. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
41575d8e |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename auto_alloc_size members to be shorter This construct is quite long-winded. In earlier days it made some sense since auto-allocation was a strange concept. But with driver model now used pretty universally, we can shorten this to 'auto'. This reduces verbosity and makes it easier to read. Coincidentally it also ensures that every declaration is on one line, thus making dtoc's job easier. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
2d481b2e |
|
01-Oct-2020 |
Neil Armstrong <narmstrong@baylibre.com> |
pwm: Add driver for Amlogic Meson PWM controller This adds the driver for the PWM controller found in the Amlogic SoCs. This PWM is only a set of Gates, Dividers and Counters: PWM output is achieved by calculating a clock that permits calculating two periods (low and high). The counter then has to be set to switch after N cycles for the first half period. The hardware has no "polarity" setting. This driver reverses the period cycles (the low length is inverted with the high length) for PWM_POLARITY_INVERSED. Disabling the PWM stops the output immediately (without waiting for the current period to complete first). Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
|
#
f10643cf |
|
19-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: core: Access device ofnode through functions At present ofnode is present in the device even if it is never used. With of-platdata this field is not used, so can be removed. In preparation for this, change the access to go through inline functions. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
d1998a9f |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename ofdata_to_platdata() to of_to_plat() This name is far too long. Rename it to remove the 'data' bits. This makes it consistent with the platdata->plat rename. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
41575d8e |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename auto_alloc_size members to be shorter This construct is quite long-winded. In earlier days it made some sense since auto-allocation was a strange concept. But with driver model now used pretty universally, we can shorten this to 'auto'. This reduces verbosity and makes it easier to read. Coincidentally it also ensures that every declaration is on one line, thus making dtoc's job easier. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
2d481b2e |
|
01-Oct-2020 |
Neil Armstrong <narmstrong@baylibre.com> |
pwm: Add driver for Amlogic Meson PWM controller This adds the driver for the PWM controller found in the Amlogic SoCs. This PWM is only a set of Gates, Dividers and Counters: PWM output is achieved by calculating a clock that permits calculating two periods (low and high). The counter then has to be set to switch after N cycles for the first half period. The hardware has no "polarity" setting. This driver reverses the period cycles (the low length is inverted with the high length) for PWM_POLARITY_INVERSED. Disabling the PWM stops the output immediately (without waiting for the current period to complete first). Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
|
#
f10643cf |
|
19-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: core: Access device ofnode through functions At present ofnode is present in the device even if it is never used. With of-platdata this field is not used, so can be removed. In preparation for this, change the access to go through inline functions. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
d1998a9f |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename ofdata_to_platdata() to of_to_plat() This name is far too long. Rename it to remove the 'data' bits. This makes it consistent with the platdata->plat rename. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
41575d8e |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename auto_alloc_size members to be shorter This construct is quite long-winded. In earlier days it made some sense since auto-allocation was a strange concept. But with driver model now used pretty universally, we can shorten this to 'auto'. This reduces verbosity and makes it easier to read. Coincidentally it also ensures that every declaration is on one line, thus making dtoc's job easier. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
2d481b2e |
|
01-Oct-2020 |
Neil Armstrong <narmstrong@baylibre.com> |
pwm: Add driver for Amlogic Meson PWM controller This adds the driver for the PWM controller found in the Amlogic SoCs. This PWM is only a set of Gates, Dividers and Counters: PWM output is achieved by calculating a clock that permits calculating two periods (low and high). The counter then has to be set to switch after N cycles for the first half period. The hardware has no "polarity" setting. This driver reverses the period cycles (the low length is inverted with the high length) for PWM_POLARITY_INVERSED. Disabling the PWM stops the output immediately (without waiting for the current period to complete first). Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
|
#
f10643cf |
|
19-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: core: Access device ofnode through functions At present ofnode is present in the device even if it is never used. With of-platdata this field is not used, so can be removed. In preparation for this, change the access to go through inline functions. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
d1998a9f |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename ofdata_to_platdata() to of_to_plat() This name is far too long. Rename it to remove the 'data' bits. This makes it consistent with the platdata->plat rename. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
41575d8e |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename auto_alloc_size members to be shorter This construct is quite long-winded. In earlier days it made some sense since auto-allocation was a strange concept. But with driver model now used pretty universally, we can shorten this to 'auto'. This reduces verbosity and makes it easier to read. Coincidentally it also ensures that every declaration is on one line, thus making dtoc's job easier. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
2d481b2e |
|
01-Oct-2020 |
Neil Armstrong <narmstrong@baylibre.com> |
pwm: Add driver for Amlogic Meson PWM controller This adds the driver for the PWM controller found in the Amlogic SoCs. This PWM is only a set of Gates, Dividers and Counters: PWM output is achieved by calculating a clock that permits calculating two periods (low and high). The counter then has to be set to switch after N cycles for the first half period. The hardware has no "polarity" setting. This driver reverses the period cycles (the low length is inverted with the high length) for PWM_POLARITY_INVERSED. Disabling the PWM stops the output immediately (without waiting for the current period to complete first). Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
|
#
f10643cf |
|
19-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: core: Access device ofnode through functions At present ofnode is present in the device even if it is never used. With of-platdata this field is not used, so can be removed. In preparation for this, change the access to go through inline functions. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
d1998a9f |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename ofdata_to_platdata() to of_to_plat() This name is far too long. Rename it to remove the 'data' bits. This makes it consistent with the platdata->plat rename. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
41575d8e |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename auto_alloc_size members to be shorter This construct is quite long-winded. In earlier days it made some sense since auto-allocation was a strange concept. But with driver model now used pretty universally, we can shorten this to 'auto'. This reduces verbosity and makes it easier to read. Coincidentally it also ensures that every declaration is on one line, thus making dtoc's job easier. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
2d481b2e |
|
01-Oct-2020 |
Neil Armstrong <narmstrong@baylibre.com> |
pwm: Add driver for Amlogic Meson PWM controller This adds the driver for the PWM controller found in the Amlogic SoCs. This PWM is only a set of Gates, Dividers and Counters: PWM output is achieved by calculating a clock that permits calculating two periods (low and high). The counter then has to be set to switch after N cycles for the first half period. The hardware has no "polarity" setting. This driver reverses the period cycles (the low length is inverted with the high length) for PWM_POLARITY_INVERSED. Disabling the PWM stops the output immediately (without waiting for the current period to complete first). Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
|
#
f10643cf |
|
19-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: core: Access device ofnode through functions At present ofnode is present in the device even if it is never used. With of-platdata this field is not used, so can be removed. In preparation for this, change the access to go through inline functions. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
d1998a9f |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename ofdata_to_platdata() to of_to_plat() This name is far too long. Rename it to remove the 'data' bits. This makes it consistent with the platdata->plat rename. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
41575d8e |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename auto_alloc_size members to be shorter This construct is quite long-winded. In earlier days it made some sense since auto-allocation was a strange concept. But with driver model now used pretty universally, we can shorten this to 'auto'. This reduces verbosity and makes it easier to read. Coincidentally it also ensures that every declaration is on one line, thus making dtoc's job easier. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
2d481b2e |
|
01-Oct-2020 |
Neil Armstrong <narmstrong@baylibre.com> |
pwm: Add driver for Amlogic Meson PWM controller This adds the driver for the PWM controller found in the Amlogic SoCs. This PWM is only a set of Gates, Dividers and Counters: PWM output is achieved by calculating a clock that permits calculating two periods (low and high). The counter then has to be set to switch after N cycles for the first half period. The hardware has no "polarity" setting. This driver reverses the period cycles (the low length is inverted with the high length) for PWM_POLARITY_INVERSED. Disabling the PWM stops the output immediately (without waiting for the current period to complete first). Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
|
#
f10643cf |
|
19-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: core: Access device ofnode through functions At present ofnode is present in the device even if it is never used. With of-platdata this field is not used, so can be removed. In preparation for this, change the access to go through inline functions. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
d1998a9f |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename ofdata_to_platdata() to of_to_plat() This name is far too long. Rename it to remove the 'data' bits. This makes it consistent with the platdata->plat rename. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
41575d8e |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename auto_alloc_size members to be shorter This construct is quite long-winded. In earlier days it made some sense since auto-allocation was a strange concept. But with driver model now used pretty universally, we can shorten this to 'auto'. This reduces verbosity and makes it easier to read. Coincidentally it also ensures that every declaration is on one line, thus making dtoc's job easier. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
2d481b2e |
|
01-Oct-2020 |
Neil Armstrong <narmstrong@baylibre.com> |
pwm: Add driver for Amlogic Meson PWM controller This adds the driver for the PWM controller found in the Amlogic SoCs. This PWM is only a set of Gates, Dividers and Counters: PWM output is achieved by calculating a clock that permits calculating two periods (low and high). The counter then has to be set to switch after N cycles for the first half period. The hardware has no "polarity" setting. This driver reverses the period cycles (the low length is inverted with the high length) for PWM_POLARITY_INVERSED. Disabling the PWM stops the output immediately (without waiting for the current period to complete first). Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
|
#
f10643cf |
|
19-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: core: Access device ofnode through functions At present ofnode is present in the device even if it is never used. With of-platdata this field is not used, so can be removed. In preparation for this, change the access to go through inline functions. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
d1998a9f |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename ofdata_to_platdata() to of_to_plat() This name is far too long. Rename it to remove the 'data' bits. This makes it consistent with the platdata->plat rename. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
41575d8e |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename auto_alloc_size members to be shorter This construct is quite long-winded. In earlier days it made some sense since auto-allocation was a strange concept. But with driver model now used pretty universally, we can shorten this to 'auto'. This reduces verbosity and makes it easier to read. Coincidentally it also ensures that every declaration is on one line, thus making dtoc's job easier. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
2d481b2e |
|
01-Oct-2020 |
Neil Armstrong <narmstrong@baylibre.com> |
pwm: Add driver for Amlogic Meson PWM controller This adds the driver for the PWM controller found in the Amlogic SoCs. This PWM is only a set of Gates, Dividers and Counters: PWM output is achieved by calculating a clock that permits calculating two periods (low and high). The counter then has to be set to switch after N cycles for the first half period. The hardware has no "polarity" setting. This driver reverses the period cycles (the low length is inverted with the high length) for PWM_POLARITY_INVERSED. Disabling the PWM stops the output immediately (without waiting for the current period to complete first). Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
|
#
f10643cf |
|
19-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: core: Access device ofnode through functions At present ofnode is present in the device even if it is never used. With of-platdata this field is not used, so can be removed. In preparation for this, change the access to go through inline functions. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
d1998a9f |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename ofdata_to_platdata() to of_to_plat() This name is far too long. Rename it to remove the 'data' bits. This makes it consistent with the platdata->plat rename. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
41575d8e |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename auto_alloc_size members to be shorter This construct is quite long-winded. In earlier days it made some sense since auto-allocation was a strange concept. But with driver model now used pretty universally, we can shorten this to 'auto'. This reduces verbosity and makes it easier to read. Coincidentally it also ensures that every declaration is on one line, thus making dtoc's job easier. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
2d481b2e |
|
01-Oct-2020 |
Neil Armstrong <narmstrong@baylibre.com> |
pwm: Add driver for Amlogic Meson PWM controller This adds the driver for the PWM controller found in the Amlogic SoCs. This PWM is only a set of Gates, Dividers and Counters: PWM output is achieved by calculating a clock that permits calculating two periods (low and high). The counter then has to be set to switch after N cycles for the first half period. The hardware has no "polarity" setting. This driver reverses the period cycles (the low length is inverted with the high length) for PWM_POLARITY_INVERSED. Disabling the PWM stops the output immediately (without waiting for the current period to complete first). Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
|
#
f10643cf |
|
19-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: core: Access device ofnode through functions At present ofnode is present in the device even if it is never used. With of-platdata this field is not used, so can be removed. In preparation for this, change the access to go through inline functions. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
d1998a9f |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename ofdata_to_platdata() to of_to_plat() This name is far too long. Rename it to remove the 'data' bits. This makes it consistent with the platdata->plat rename. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
41575d8e |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename auto_alloc_size members to be shorter This construct is quite long-winded. In earlier days it made some sense since auto-allocation was a strange concept. But with driver model now used pretty universally, we can shorten this to 'auto'. This reduces verbosity and makes it easier to read. Coincidentally it also ensures that every declaration is on one line, thus making dtoc's job easier. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
2d481b2e |
|
01-Oct-2020 |
Neil Armstrong <narmstrong@baylibre.com> |
pwm: Add driver for Amlogic Meson PWM controller This adds the driver for the PWM controller found in the Amlogic SoCs. This PWM is only a set of Gates, Dividers and Counters: PWM output is achieved by calculating a clock that permits calculating two periods (low and high). The counter then has to be set to switch after N cycles for the first half period. The hardware has no "polarity" setting. This driver reverses the period cycles (the low length is inverted with the high length) for PWM_POLARITY_INVERSED. Disabling the PWM stops the output immediately (without waiting for the current period to complete first). Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
|
#
f10643cf |
|
19-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: core: Access device ofnode through functions At present ofnode is present in the device even if it is never used. With of-platdata this field is not used, so can be removed. In preparation for this, change the access to go through inline functions. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
d1998a9f |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename ofdata_to_platdata() to of_to_plat() This name is far too long. Rename it to remove the 'data' bits. This makes it consistent with the platdata->plat rename. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
41575d8e |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename auto_alloc_size members to be shorter This construct is quite long-winded. In earlier days it made some sense since auto-allocation was a strange concept. But with driver model now used pretty universally, we can shorten this to 'auto'. This reduces verbosity and makes it easier to read. Coincidentally it also ensures that every declaration is on one line, thus making dtoc's job easier. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
2d481b2e |
|
01-Oct-2020 |
Neil Armstrong <narmstrong@baylibre.com> |
pwm: Add driver for Amlogic Meson PWM controller This adds the driver for the PWM controller found in the Amlogic SoCs. This PWM is only a set of Gates, Dividers and Counters: PWM output is achieved by calculating a clock that permits calculating two periods (low and high). The counter then has to be set to switch after N cycles for the first half period. The hardware has no "polarity" setting. This driver reverses the period cycles (the low length is inverted with the high length) for PWM_POLARITY_INVERSED. Disabling the PWM stops the output immediately (without waiting for the current period to complete first). Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
|
#
f10643cf |
|
19-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: core: Access device ofnode through functions At present ofnode is present in the device even if it is never used. With of-platdata this field is not used, so can be removed. In preparation for this, change the access to go through inline functions. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
d1998a9f |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename ofdata_to_platdata() to of_to_plat() This name is far too long. Rename it to remove the 'data' bits. This makes it consistent with the platdata->plat rename. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
41575d8e |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename auto_alloc_size members to be shorter This construct is quite long-winded. In earlier days it made some sense since auto-allocation was a strange concept. But with driver model now used pretty universally, we can shorten this to 'auto'. This reduces verbosity and makes it easier to read. Coincidentally it also ensures that every declaration is on one line, thus making dtoc's job easier. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
2d481b2e |
|
01-Oct-2020 |
Neil Armstrong <narmstrong@baylibre.com> |
pwm: Add driver for Amlogic Meson PWM controller This adds the driver for the PWM controller found in the Amlogic SoCs. This PWM is only a set of Gates, Dividers and Counters: PWM output is achieved by calculating a clock that permits calculating two periods (low and high). The counter then has to be set to switch after N cycles for the first half period. The hardware has no "polarity" setting. This driver reverses the period cycles (the low length is inverted with the high length) for PWM_POLARITY_INVERSED. Disabling the PWM stops the output immediately (without waiting for the current period to complete first). Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
|
#
f10643cf |
|
19-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: core: Access device ofnode through functions At present ofnode is present in the device even if it is never used. With of-platdata this field is not used, so can be removed. In preparation for this, change the access to go through inline functions. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
d1998a9f |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename ofdata_to_platdata() to of_to_plat() This name is far too long. Rename it to remove the 'data' bits. This makes it consistent with the platdata->plat rename. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
41575d8e |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename auto_alloc_size members to be shorter This construct is quite long-winded. In earlier days it made some sense since auto-allocation was a strange concept. But with driver model now used pretty universally, we can shorten this to 'auto'. This reduces verbosity and makes it easier to read. Coincidentally it also ensures that every declaration is on one line, thus making dtoc's job easier. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
2d481b2e |
|
01-Oct-2020 |
Neil Armstrong <narmstrong@baylibre.com> |
pwm: Add driver for Amlogic Meson PWM controller This adds the driver for the PWM controller found in the Amlogic SoCs. This PWM is only a set of Gates, Dividers and Counters: PWM output is achieved by calculating a clock that permits calculating two periods (low and high). The counter then has to be set to switch after N cycles for the first half period. The hardware has no "polarity" setting. This driver reverses the period cycles (the low length is inverted with the high length) for PWM_POLARITY_INVERSED. Disabling the PWM stops the output immediately (without waiting for the current period to complete first). Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
|
#
f10643cf |
|
19-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: core: Access device ofnode through functions At present ofnode is present in the device even if it is never used. With of-platdata this field is not used, so can be removed. In preparation for this, change the access to go through inline functions. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
d1998a9f |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename ofdata_to_platdata() to of_to_plat() This name is far too long. Rename it to remove the 'data' bits. This makes it consistent with the platdata->plat rename. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
41575d8e |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename auto_alloc_size members to be shorter This construct is quite long-winded. In earlier days it made some sense since auto-allocation was a strange concept. But with driver model now used pretty universally, we can shorten this to 'auto'. This reduces verbosity and makes it easier to read. Coincidentally it also ensures that every declaration is on one line, thus making dtoc's job easier. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
2d481b2e |
|
01-Oct-2020 |
Neil Armstrong <narmstrong@baylibre.com> |
pwm: Add driver for Amlogic Meson PWM controller This adds the driver for the PWM controller found in the Amlogic SoCs. This PWM is only a set of Gates, Dividers and Counters: PWM output is achieved by calculating a clock that permits calculating two periods (low and high). The counter then has to be set to switch after N cycles for the first half period. The hardware has no "polarity" setting. This driver reverses the period cycles (the low length is inverted with the high length) for PWM_POLARITY_INVERSED. Disabling the PWM stops the output immediately (without waiting for the current period to complete first). Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
|
#
f10643cf |
|
19-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: core: Access device ofnode through functions At present ofnode is present in the device even if it is never used. With of-platdata this field is not used, so can be removed. In preparation for this, change the access to go through inline functions. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
d1998a9f |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename ofdata_to_platdata() to of_to_plat() This name is far too long. Rename it to remove the 'data' bits. This makes it consistent with the platdata->plat rename. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
41575d8e |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename auto_alloc_size members to be shorter This construct is quite long-winded. In earlier days it made some sense since auto-allocation was a strange concept. But with driver model now used pretty universally, we can shorten this to 'auto'. This reduces verbosity and makes it easier to read. Coincidentally it also ensures that every declaration is on one line, thus making dtoc's job easier. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
2d481b2e |
|
01-Oct-2020 |
Neil Armstrong <narmstrong@baylibre.com> |
pwm: Add driver for Amlogic Meson PWM controller This adds the driver for the PWM controller found in the Amlogic SoCs. This PWM is only a set of Gates, Dividers and Counters: PWM output is achieved by calculating a clock that permits calculating two periods (low and high). The counter then has to be set to switch after N cycles for the first half period. The hardware has no "polarity" setting. This driver reverses the period cycles (the low length is inverted with the high length) for PWM_POLARITY_INVERSED. Disabling the PWM stops the output immediately (without waiting for the current period to complete first). Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
|
#
f10643cf |
|
19-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: core: Access device ofnode through functions At present ofnode is present in the device even if it is never used. With of-platdata this field is not used, so can be removed. In preparation for this, change the access to go through inline functions. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
d1998a9f |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename ofdata_to_platdata() to of_to_plat() This name is far too long. Rename it to remove the 'data' bits. This makes it consistent with the platdata->plat rename. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
41575d8e |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename auto_alloc_size members to be shorter This construct is quite long-winded. In earlier days it made some sense since auto-allocation was a strange concept. But with driver model now used pretty universally, we can shorten this to 'auto'. This reduces verbosity and makes it easier to read. Coincidentally it also ensures that every declaration is on one line, thus making dtoc's job easier. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
2d481b2e |
|
01-Oct-2020 |
Neil Armstrong <narmstrong@baylibre.com> |
pwm: Add driver for Amlogic Meson PWM controller This adds the driver for the PWM controller found in the Amlogic SoCs. This PWM is only a set of Gates, Dividers and Counters: PWM output is achieved by calculating a clock that permits calculating two periods (low and high). The counter then has to be set to switch after N cycles for the first half period. The hardware has no "polarity" setting. This driver reverses the period cycles (the low length is inverted with the high length) for PWM_POLARITY_INVERSED. Disabling the PWM stops the output immediately (without waiting for the current period to complete first). Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
|
#
f10643cf |
|
19-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: core: Access device ofnode through functions At present ofnode is present in the device even if it is never used. With of-platdata this field is not used, so can be removed. In preparation for this, change the access to go through inline functions. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
d1998a9f |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename ofdata_to_platdata() to of_to_plat() This name is far too long. Rename it to remove the 'data' bits. This makes it consistent with the platdata->plat rename. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
41575d8e |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename auto_alloc_size members to be shorter This construct is quite long-winded. In earlier days it made some sense since auto-allocation was a strange concept. But with driver model now used pretty universally, we can shorten this to 'auto'. This reduces verbosity and makes it easier to read. Coincidentally it also ensures that every declaration is on one line, thus making dtoc's job easier. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
2d481b2e |
|
01-Oct-2020 |
Neil Armstrong <narmstrong@baylibre.com> |
pwm: Add driver for Amlogic Meson PWM controller This adds the driver for the PWM controller found in the Amlogic SoCs. This PWM is only a set of Gates, Dividers and Counters: PWM output is achieved by calculating a clock that permits calculating two periods (low and high). The counter then has to be set to switch after N cycles for the first half period. The hardware has no "polarity" setting. This driver reverses the period cycles (the low length is inverted with the high length) for PWM_POLARITY_INVERSED. Disabling the PWM stops the output immediately (without waiting for the current period to complete first). Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
|
#
f10643cf |
|
19-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: core: Access device ofnode through functions At present ofnode is present in the device even if it is never used. With of-platdata this field is not used, so can be removed. In preparation for this, change the access to go through inline functions. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
d1998a9f |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename ofdata_to_platdata() to of_to_plat() This name is far too long. Rename it to remove the 'data' bits. This makes it consistent with the platdata->plat rename. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
41575d8e |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename auto_alloc_size members to be shorter This construct is quite long-winded. In earlier days it made some sense since auto-allocation was a strange concept. But with driver model now used pretty universally, we can shorten this to 'auto'. This reduces verbosity and makes it easier to read. Coincidentally it also ensures that every declaration is on one line, thus making dtoc's job easier. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
2d481b2e |
|
01-Oct-2020 |
Neil Armstrong <narmstrong@baylibre.com> |
pwm: Add driver for Amlogic Meson PWM controller This adds the driver for the PWM controller found in the Amlogic SoCs. This PWM is only a set of Gates, Dividers and Counters: PWM output is achieved by calculating a clock that permits calculating two periods (low and high). The counter then has to be set to switch after N cycles for the first half period. The hardware has no "polarity" setting. This driver reverses the period cycles (the low length is inverted with the high length) for PWM_POLARITY_INVERSED. Disabling the PWM stops the output immediately (without waiting for the current period to complete first). Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
|
#
f10643cf |
|
19-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: core: Access device ofnode through functions At present ofnode is present in the device even if it is never used. With of-platdata this field is not used, so can be removed. In preparation for this, change the access to go through inline functions. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
d1998a9f |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename ofdata_to_platdata() to of_to_plat() This name is far too long. Rename it to remove the 'data' bits. This makes it consistent with the platdata->plat rename. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
41575d8e |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename auto_alloc_size members to be shorter This construct is quite long-winded. In earlier days it made some sense since auto-allocation was a strange concept. But with driver model now used pretty universally, we can shorten this to 'auto'. This reduces verbosity and makes it easier to read. Coincidentally it also ensures that every declaration is on one line, thus making dtoc's job easier. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
2d481b2e |
|
01-Oct-2020 |
Neil Armstrong <narmstrong@baylibre.com> |
pwm: Add driver for Amlogic Meson PWM controller This adds the driver for the PWM controller found in the Amlogic SoCs. This PWM is only a set of Gates, Dividers and Counters: PWM output is achieved by calculating a clock that permits calculating two periods (low and high). The counter then has to be set to switch after N cycles for the first half period. The hardware has no "polarity" setting. This driver reverses the period cycles (the low length is inverted with the high length) for PWM_POLARITY_INVERSED. Disabling the PWM stops the output immediately (without waiting for the current period to complete first). Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
|
#
f10643cf |
|
19-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: core: Access device ofnode through functions At present ofnode is present in the device even if it is never used. With of-platdata this field is not used, so can be removed. In preparation for this, change the access to go through inline functions. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
d1998a9f |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename ofdata_to_platdata() to of_to_plat() This name is far too long. Rename it to remove the 'data' bits. This makes it consistent with the platdata->plat rename. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
41575d8e |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename auto_alloc_size members to be shorter This construct is quite long-winded. In earlier days it made some sense since auto-allocation was a strange concept. But with driver model now used pretty universally, we can shorten this to 'auto'. This reduces verbosity and makes it easier to read. Coincidentally it also ensures that every declaration is on one line, thus making dtoc's job easier. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
2d481b2e |
|
01-Oct-2020 |
Neil Armstrong <narmstrong@baylibre.com> |
pwm: Add driver for Amlogic Meson PWM controller This adds the driver for the PWM controller found in the Amlogic SoCs. This PWM is only a set of Gates, Dividers and Counters: PWM output is achieved by calculating a clock that permits calculating two periods (low and high). The counter then has to be set to switch after N cycles for the first half period. The hardware has no "polarity" setting. This driver reverses the period cycles (the low length is inverted with the high length) for PWM_POLARITY_INVERSED. Disabling the PWM stops the output immediately (without waiting for the current period to complete first). Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
|
#
f10643cf |
|
19-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: core: Access device ofnode through functions At present ofnode is present in the device even if it is never used. With of-platdata this field is not used, so can be removed. In preparation for this, change the access to go through inline functions. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
d1998a9f |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename ofdata_to_platdata() to of_to_plat() This name is far too long. Rename it to remove the 'data' bits. This makes it consistent with the platdata->plat rename. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
41575d8e |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename auto_alloc_size members to be shorter This construct is quite long-winded. In earlier days it made some sense since auto-allocation was a strange concept. But with driver model now used pretty universally, we can shorten this to 'auto'. This reduces verbosity and makes it easier to read. Coincidentally it also ensures that every declaration is on one line, thus making dtoc's job easier. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
2d481b2e |
|
01-Oct-2020 |
Neil Armstrong <narmstrong@baylibre.com> |
pwm: Add driver for Amlogic Meson PWM controller This adds the driver for the PWM controller found in the Amlogic SoCs. This PWM is only a set of Gates, Dividers and Counters: PWM output is achieved by calculating a clock that permits calculating two periods (low and high). The counter then has to be set to switch after N cycles for the first half period. The hardware has no "polarity" setting. This driver reverses the period cycles (the low length is inverted with the high length) for PWM_POLARITY_INVERSED. Disabling the PWM stops the output immediately (without waiting for the current period to complete first). Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
|
#
f10643cf |
|
19-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: core: Access device ofnode through functions At present ofnode is present in the device even if it is never used. With of-platdata this field is not used, so can be removed. In preparation for this, change the access to go through inline functions. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
d1998a9f |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename ofdata_to_platdata() to of_to_plat() This name is far too long. Rename it to remove the 'data' bits. This makes it consistent with the platdata->plat rename. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
41575d8e |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename auto_alloc_size members to be shorter This construct is quite long-winded. In earlier days it made some sense since auto-allocation was a strange concept. But with driver model now used pretty universally, we can shorten this to 'auto'. This reduces verbosity and makes it easier to read. Coincidentally it also ensures that every declaration is on one line, thus making dtoc's job easier. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
2d481b2e |
|
01-Oct-2020 |
Neil Armstrong <narmstrong@baylibre.com> |
pwm: Add driver for Amlogic Meson PWM controller This adds the driver for the PWM controller found in the Amlogic SoCs. This PWM is only a set of Gates, Dividers and Counters: PWM output is achieved by calculating a clock that permits calculating two periods (low and high). The counter then has to be set to switch after N cycles for the first half period. The hardware has no "polarity" setting. This driver reverses the period cycles (the low length is inverted with the high length) for PWM_POLARITY_INVERSED. Disabling the PWM stops the output immediately (without waiting for the current period to complete first). Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
|
#
f10643cf |
|
19-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: core: Access device ofnode through functions At present ofnode is present in the device even if it is never used. With of-platdata this field is not used, so can be removed. In preparation for this, change the access to go through inline functions. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
d1998a9f |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename ofdata_to_platdata() to of_to_plat() This name is far too long. Rename it to remove the 'data' bits. This makes it consistent with the platdata->plat rename. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
41575d8e |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename auto_alloc_size members to be shorter This construct is quite long-winded. In earlier days it made some sense since auto-allocation was a strange concept. But with driver model now used pretty universally, we can shorten this to 'auto'. This reduces verbosity and makes it easier to read. Coincidentally it also ensures that every declaration is on one line, thus making dtoc's job easier. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
2d481b2e |
|
01-Oct-2020 |
Neil Armstrong <narmstrong@baylibre.com> |
pwm: Add driver for Amlogic Meson PWM controller This adds the driver for the PWM controller found in the Amlogic SoCs. This PWM is only a set of Gates, Dividers and Counters: PWM output is achieved by calculating a clock that permits calculating two periods (low and high). The counter then has to be set to switch after N cycles for the first half period. The hardware has no "polarity" setting. This driver reverses the period cycles (the low length is inverted with the high length) for PWM_POLARITY_INVERSED. Disabling the PWM stops the output immediately (without waiting for the current period to complete first). Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
|
#
f10643cf |
|
19-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: core: Access device ofnode through functions At present ofnode is present in the device even if it is never used. With of-platdata this field is not used, so can be removed. In preparation for this, change the access to go through inline functions. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
d1998a9f |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename ofdata_to_platdata() to of_to_plat() This name is far too long. Rename it to remove the 'data' bits. This makes it consistent with the platdata->plat rename. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
41575d8e |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename auto_alloc_size members to be shorter This construct is quite long-winded. In earlier days it made some sense since auto-allocation was a strange concept. But with driver model now used pretty universally, we can shorten this to 'auto'. This reduces verbosity and makes it easier to read. Coincidentally it also ensures that every declaration is on one line, thus making dtoc's job easier. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
2d481b2e |
|
01-Oct-2020 |
Neil Armstrong <narmstrong@baylibre.com> |
pwm: Add driver for Amlogic Meson PWM controller This adds the driver for the PWM controller found in the Amlogic SoCs. This PWM is only a set of Gates, Dividers and Counters: PWM output is achieved by calculating a clock that permits calculating two periods (low and high). The counter then has to be set to switch after N cycles for the first half period. The hardware has no "polarity" setting. This driver reverses the period cycles (the low length is inverted with the high length) for PWM_POLARITY_INVERSED. Disabling the PWM stops the output immediately (without waiting for the current period to complete first). Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
|
#
f10643cf |
|
19-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: core: Access device ofnode through functions At present ofnode is present in the device even if it is never used. With of-platdata this field is not used, so can be removed. In preparation for this, change the access to go through inline functions. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
d1998a9f |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename ofdata_to_platdata() to of_to_plat() This name is far too long. Rename it to remove the 'data' bits. This makes it consistent with the platdata->plat rename. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
41575d8e |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename auto_alloc_size members to be shorter This construct is quite long-winded. In earlier days it made some sense since auto-allocation was a strange concept. But with driver model now used pretty universally, we can shorten this to 'auto'. This reduces verbosity and makes it easier to read. Coincidentally it also ensures that every declaration is on one line, thus making dtoc's job easier. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
2d481b2e |
|
01-Oct-2020 |
Neil Armstrong <narmstrong@baylibre.com> |
pwm: Add driver for Amlogic Meson PWM controller This adds the driver for the PWM controller found in the Amlogic SoCs. This PWM is only a set of Gates, Dividers and Counters: PWM output is achieved by calculating a clock that permits calculating two periods (low and high). The counter then has to be set to switch after N cycles for the first half period. The hardware has no "polarity" setting. This driver reverses the period cycles (the low length is inverted with the high length) for PWM_POLARITY_INVERSED. Disabling the PWM stops the output immediately (without waiting for the current period to complete first). Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
|
#
f10643cf |
|
19-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: core: Access device ofnode through functions At present ofnode is present in the device even if it is never used. With of-platdata this field is not used, so can be removed. In preparation for this, change the access to go through inline functions. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
d1998a9f |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename ofdata_to_platdata() to of_to_plat() This name is far too long. Rename it to remove the 'data' bits. This makes it consistent with the platdata->plat rename. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
41575d8e |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename auto_alloc_size members to be shorter This construct is quite long-winded. In earlier days it made some sense since auto-allocation was a strange concept. But with driver model now used pretty universally, we can shorten this to 'auto'. This reduces verbosity and makes it easier to read. Coincidentally it also ensures that every declaration is on one line, thus making dtoc's job easier. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
2d481b2e |
|
01-Oct-2020 |
Neil Armstrong <narmstrong@baylibre.com> |
pwm: Add driver for Amlogic Meson PWM controller This adds the driver for the PWM controller found in the Amlogic SoCs. This PWM is only a set of Gates, Dividers and Counters: PWM output is achieved by calculating a clock that permits calculating two periods (low and high). The counter then has to be set to switch after N cycles for the first half period. The hardware has no "polarity" setting. This driver reverses the period cycles (the low length is inverted with the high length) for PWM_POLARITY_INVERSED. Disabling the PWM stops the output immediately (without waiting for the current period to complete first). Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
|
#
f10643cf |
|
19-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: core: Access device ofnode through functions At present ofnode is present in the device even if it is never used. With of-platdata this field is not used, so can be removed. In preparation for this, change the access to go through inline functions. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
d1998a9f |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename ofdata_to_platdata() to of_to_plat() This name is far too long. Rename it to remove the 'data' bits. This makes it consistent with the platdata->plat rename. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
41575d8e |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename auto_alloc_size members to be shorter This construct is quite long-winded. In earlier days it made some sense since auto-allocation was a strange concept. But with driver model now used pretty universally, we can shorten this to 'auto'. This reduces verbosity and makes it easier to read. Coincidentally it also ensures that every declaration is on one line, thus making dtoc's job easier. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
2d481b2e |
|
01-Oct-2020 |
Neil Armstrong <narmstrong@baylibre.com> |
pwm: Add driver for Amlogic Meson PWM controller This adds the driver for the PWM controller found in the Amlogic SoCs. This PWM is only a set of Gates, Dividers and Counters: PWM output is achieved by calculating a clock that permits calculating two periods (low and high). The counter then has to be set to switch after N cycles for the first half period. The hardware has no "polarity" setting. This driver reverses the period cycles (the low length is inverted with the high length) for PWM_POLARITY_INVERSED. Disabling the PWM stops the output immediately (without waiting for the current period to complete first). Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
|
#
f10643cf |
|
19-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: core: Access device ofnode through functions At present ofnode is present in the device even if it is never used. With of-platdata this field is not used, so can be removed. In preparation for this, change the access to go through inline functions. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
d1998a9f |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename ofdata_to_platdata() to of_to_plat() This name is far too long. Rename it to remove the 'data' bits. This makes it consistent with the platdata->plat rename. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
41575d8e |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename auto_alloc_size members to be shorter This construct is quite long-winded. In earlier days it made some sense since auto-allocation was a strange concept. But with driver model now used pretty universally, we can shorten this to 'auto'. This reduces verbosity and makes it easier to read. Coincidentally it also ensures that every declaration is on one line, thus making dtoc's job easier. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
2d481b2e |
|
01-Oct-2020 |
Neil Armstrong <narmstrong@baylibre.com> |
pwm: Add driver for Amlogic Meson PWM controller This adds the driver for the PWM controller found in the Amlogic SoCs. This PWM is only a set of Gates, Dividers and Counters: PWM output is achieved by calculating a clock that permits calculating two periods (low and high). The counter then has to be set to switch after N cycles for the first half period. The hardware has no "polarity" setting. This driver reverses the period cycles (the low length is inverted with the high length) for PWM_POLARITY_INVERSED. Disabling the PWM stops the output immediately (without waiting for the current period to complete first). Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
|
#
f10643cf |
|
19-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: core: Access device ofnode through functions At present ofnode is present in the device even if it is never used. With of-platdata this field is not used, so can be removed. In preparation for this, change the access to go through inline functions. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
d1998a9f |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename ofdata_to_platdata() to of_to_plat() This name is far too long. Rename it to remove the 'data' bits. This makes it consistent with the platdata->plat rename. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
41575d8e |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename auto_alloc_size members to be shorter This construct is quite long-winded. In earlier days it made some sense since auto-allocation was a strange concept. But with driver model now used pretty universally, we can shorten this to 'auto'. This reduces verbosity and makes it easier to read. Coincidentally it also ensures that every declaration is on one line, thus making dtoc's job easier. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
2d481b2e |
|
01-Oct-2020 |
Neil Armstrong <narmstrong@baylibre.com> |
pwm: Add driver for Amlogic Meson PWM controller This adds the driver for the PWM controller found in the Amlogic SoCs. This PWM is only a set of Gates, Dividers and Counters: PWM output is achieved by calculating a clock that permits calculating two periods (low and high). The counter then has to be set to switch after N cycles for the first half period. The hardware has no "polarity" setting. This driver reverses the period cycles (the low length is inverted with the high length) for PWM_POLARITY_INVERSED. Disabling the PWM stops the output immediately (without waiting for the current period to complete first). Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
|
#
f10643cf |
|
19-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: core: Access device ofnode through functions At present ofnode is present in the device even if it is never used. With of-platdata this field is not used, so can be removed. In preparation for this, change the access to go through inline functions. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
d1998a9f |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename ofdata_to_platdata() to of_to_plat() This name is far too long. Rename it to remove the 'data' bits. This makes it consistent with the platdata->plat rename. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
41575d8e |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename auto_alloc_size members to be shorter This construct is quite long-winded. In earlier days it made some sense since auto-allocation was a strange concept. But with driver model now used pretty universally, we can shorten this to 'auto'. This reduces verbosity and makes it easier to read. Coincidentally it also ensures that every declaration is on one line, thus making dtoc's job easier. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
2d481b2e |
|
01-Oct-2020 |
Neil Armstrong <narmstrong@baylibre.com> |
pwm: Add driver for Amlogic Meson PWM controller This adds the driver for the PWM controller found in the Amlogic SoCs. This PWM is only a set of Gates, Dividers and Counters: PWM output is achieved by calculating a clock that permits calculating two periods (low and high). The counter then has to be set to switch after N cycles for the first half period. The hardware has no "polarity" setting. This driver reverses the period cycles (the low length is inverted with the high length) for PWM_POLARITY_INVERSED. Disabling the PWM stops the output immediately (without waiting for the current period to complete first). Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
|
#
2d481b2e |
|
01-Oct-2020 |
Neil Armstrong <narmstrong@baylibre.com> |
pwm: Add driver for Amlogic Meson PWM controller This adds the driver for the PWM controller found in the Amlogic SoCs. This PWM is only a set of Gates, Dividers and Counters: PWM output is achieved by calculating a clock that permits calculating two periods (low and high). The counter then has to be set to switch after N cycles for the first half period. The hardware has no "polarity" setting. This driver reverses the period cycles (the low length is inverted with the high length) for PWM_POLARITY_INVERSED. Disabling the PWM stops the output immediately (without waiting for the current period to complete first). Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
|
#
2d481b2e |
|
01-Oct-2020 |
Neil Armstrong <narmstrong@baylibre.com> |
pwm: Add driver for Amlogic Meson PWM controller This adds the driver for the PWM controller found in the Amlogic SoCs. This PWM is only a set of Gates, Dividers and Counters: PWM output is achieved by calculating a clock that permits calculating two periods (low and high). The counter then has to be set to switch after N cycles for the first half period. The hardware has no "polarity" setting. This driver reverses the period cycles (the low length is inverted with the high length) for PWM_POLARITY_INVERSED. Disabling the PWM stops the output immediately (without waiting for the current period to complete first). Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
|
#
2d481b2e |
|
01-Oct-2020 |
Neil Armstrong <narmstrong@baylibre.com> |
pwm: Add driver for Amlogic Meson PWM controller This adds the driver for the PWM controller found in the Amlogic SoCs. This PWM is only a set of Gates, Dividers and Counters: PWM output is achieved by calculating a clock that permits calculating two periods (low and high). The counter then has to be set to switch after N cycles for the first half period. The hardware has no "polarity" setting. This driver reverses the period cycles (the low length is inverted with the high length) for PWM_POLARITY_INVERSED. Disabling the PWM stops the output immediately (without waiting for the current period to complete first). Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
|
#
2d481b2e |
|
01-Oct-2020 |
Neil Armstrong <narmstrong@baylibre.com> |
pwm: Add driver for Amlogic Meson PWM controller This adds the driver for the PWM controller found in the Amlogic SoCs. This PWM is only a set of Gates, Dividers and Counters: PWM output is achieved by calculating a clock that permits calculating two periods (low and high). The counter then has to be set to switch after N cycles for the first half period. The hardware has no "polarity" setting. This driver reverses the period cycles (the low length is inverted with the high length) for PWM_POLARITY_INVERSED. Disabling the PWM stops the output immediately (without waiting for the current period to complete first). Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
|
#
2d481b2e |
|
01-Oct-2020 |
Neil Armstrong <narmstrong@baylibre.com> |
pwm: Add driver for Amlogic Meson PWM controller This adds the driver for the PWM controller found in the Amlogic SoCs. This PWM is only a set of Gates, Dividers and Counters: PWM output is achieved by calculating a clock that permits calculating two periods (low and high). The counter then has to be set to switch after N cycles for the first half period. The hardware has no "polarity" setting. This driver reverses the period cycles (the low length is inverted with the high length) for PWM_POLARITY_INVERSED. Disabling the PWM stops the output immediately (without waiting for the current period to complete first). Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
|
#
2d481b2e |
|
01-Oct-2020 |
Neil Armstrong <narmstrong@baylibre.com> |
pwm: Add driver for Amlogic Meson PWM controller This adds the driver for the PWM controller found in the Amlogic SoCs. This PWM is only a set of Gates, Dividers and Counters: PWM output is achieved by calculating a clock that permits calculating two periods (low and high). The counter then has to be set to switch after N cycles for the first half period. The hardware has no "polarity" setting. This driver reverses the period cycles (the low length is inverted with the high length) for PWM_POLARITY_INVERSED. Disabling the PWM stops the output immediately (without waiting for the current period to complete first). Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
|
#
2d481b2e |
|
01-Oct-2020 |
Neil Armstrong <narmstrong@baylibre.com> |
pwm: Add driver for Amlogic Meson PWM controller This adds the driver for the PWM controller found in the Amlogic SoCs. This PWM is only a set of Gates, Dividers and Counters: PWM output is achieved by calculating a clock that permits calculating two periods (low and high). The counter then has to be set to switch after N cycles for the first half period. The hardware has no "polarity" setting. This driver reverses the period cycles (the low length is inverted with the high length) for PWM_POLARITY_INVERSED. Disabling the PWM stops the output immediately (without waiting for the current period to complete first). Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
|
#
2d481b2e |
|
01-Oct-2020 |
Neil Armstrong <narmstrong@baylibre.com> |
pwm: Add driver for Amlogic Meson PWM controller This adds the driver for the PWM controller found in the Amlogic SoCs. This PWM is only a set of Gates, Dividers and Counters: PWM output is achieved by calculating a clock that permits calculating two periods (low and high). The counter then has to be set to switch after N cycles for the first half period. The hardware has no "polarity" setting. This driver reverses the period cycles (the low length is inverted with the high length) for PWM_POLARITY_INVERSED. Disabling the PWM stops the output immediately (without waiting for the current period to complete first). Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
|
#
2d481b2e |
|
01-Oct-2020 |
Neil Armstrong <narmstrong@baylibre.com> |
pwm: Add driver for Amlogic Meson PWM controller This adds the driver for the PWM controller found in the Amlogic SoCs. This PWM is only a set of Gates, Dividers and Counters: PWM output is achieved by calculating a clock that permits calculating two periods (low and high). The counter then has to be set to switch after N cycles for the first half period. The hardware has no "polarity" setting. This driver reverses the period cycles (the low length is inverted with the high length) for PWM_POLARITY_INVERSED. Disabling the PWM stops the output immediately (without waiting for the current period to complete first). Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
|
#
2d481b2e |
|
01-Oct-2020 |
Neil Armstrong <narmstrong@baylibre.com> |
pwm: Add driver for Amlogic Meson PWM controller This adds the driver for the PWM controller found in the Amlogic SoCs. This PWM is only a set of Gates, Dividers and Counters: PWM output is achieved by calculating a clock that permits calculating two periods (low and high). The counter then has to be set to switch after N cycles for the first half period. The hardware has no "polarity" setting. This driver reverses the period cycles (the low length is inverted with the high length) for PWM_POLARITY_INVERSED. Disabling the PWM stops the output immediately (without waiting for the current period to complete first). Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
|
#
2d481b2e |
|
01-Oct-2020 |
Neil Armstrong <narmstrong@baylibre.com> |
pwm: Add driver for Amlogic Meson PWM controller This adds the driver for the PWM controller found in the Amlogic SoCs. This PWM is only a set of Gates, Dividers and Counters: PWM output is achieved by calculating a clock that permits calculating two periods (low and high). The counter then has to be set to switch after N cycles for the first half period. The hardware has no "polarity" setting. This driver reverses the period cycles (the low length is inverted with the high length) for PWM_POLARITY_INVERSED. Disabling the PWM stops the output immediately (without waiting for the current period to complete first). Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
|
#
2d481b2e |
|
01-Oct-2020 |
Neil Armstrong <narmstrong@baylibre.com> |
pwm: Add driver for Amlogic Meson PWM controller This adds the driver for the PWM controller found in the Amlogic SoCs. This PWM is only a set of Gates, Dividers and Counters: PWM output is achieved by calculating a clock that permits calculating two periods (low and high). The counter then has to be set to switch after N cycles for the first half period. The hardware has no "polarity" setting. This driver reverses the period cycles (the low length is inverted with the high length) for PWM_POLARITY_INVERSED. Disabling the PWM stops the output immediately (without waiting for the current period to complete first). Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
|
#
2d481b2e |
|
01-Oct-2020 |
Neil Armstrong <narmstrong@baylibre.com> |
pwm: Add driver for Amlogic Meson PWM controller This adds the driver for the PWM controller found in the Amlogic SoCs. This PWM is only a set of Gates, Dividers and Counters: PWM output is achieved by calculating a clock that permits calculating two periods (low and high). The counter then has to be set to switch after N cycles for the first half period. The hardware has no "polarity" setting. This driver reverses the period cycles (the low length is inverted with the high length) for PWM_POLARITY_INVERSED. Disabling the PWM stops the output immediately (without waiting for the current period to complete first). Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
|
#
2d481b2e |
|
01-Oct-2020 |
Neil Armstrong <narmstrong@baylibre.com> |
pwm: Add driver for Amlogic Meson PWM controller This adds the driver for the PWM controller found in the Amlogic SoCs. This PWM is only a set of Gates, Dividers and Counters: PWM output is achieved by calculating a clock that permits calculating two periods (low and high). The counter then has to be set to switch after N cycles for the first half period. The hardware has no "polarity" setting. This driver reverses the period cycles (the low length is inverted with the high length) for PWM_POLARITY_INVERSED. Disabling the PWM stops the output immediately (without waiting for the current period to complete first). Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
|
#
2d481b2e |
|
01-Oct-2020 |
Neil Armstrong <narmstrong@baylibre.com> |
pwm: Add driver for Amlogic Meson PWM controller This adds the driver for the PWM controller found in the Amlogic SoCs. This PWM is only a set of Gates, Dividers and Counters: PWM output is achieved by calculating a clock that permits calculating two periods (low and high). The counter then has to be set to switch after N cycles for the first half period. The hardware has no "polarity" setting. This driver reverses the period cycles (the low length is inverted with the high length) for PWM_POLARITY_INVERSED. Disabling the PWM stops the output immediately (without waiting for the current period to complete first). Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
|
#
2d481b2e |
|
01-Oct-2020 |
Neil Armstrong <narmstrong@baylibre.com> |
pwm: Add driver for Amlogic Meson PWM controller This adds the driver for the PWM controller found in the Amlogic SoCs. This PWM is only a set of Gates, Dividers and Counters: PWM output is achieved by calculating a clock that permits calculating two periods (low and high). The counter then has to be set to switch after N cycles for the first half period. The hardware has no "polarity" setting. This driver reverses the period cycles (the low length is inverted with the high length) for PWM_POLARITY_INVERSED. Disabling the PWM stops the output immediately (without waiting for the current period to complete first). Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
|
#
2d481b2e |
|
01-Oct-2020 |
Neil Armstrong <narmstrong@baylibre.com> |
pwm: Add driver for Amlogic Meson PWM controller This adds the driver for the PWM controller found in the Amlogic SoCs. This PWM is only a set of Gates, Dividers and Counters: PWM output is achieved by calculating a clock that permits calculating two periods (low and high). The counter then has to be set to switch after N cycles for the first half period. The hardware has no "polarity" setting. This driver reverses the period cycles (the low length is inverted with the high length) for PWM_POLARITY_INVERSED. Disabling the PWM stops the output immediately (without waiting for the current period to complete first). Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
|
#
2d481b2e |
|
01-Oct-2020 |
Neil Armstrong <narmstrong@baylibre.com> |
pwm: Add driver for Amlogic Meson PWM controller This adds the driver for the PWM controller found in the Amlogic SoCs. This PWM is only a set of Gates, Dividers and Counters: PWM output is achieved by calculating a clock that permits calculating two periods (low and high). The counter then has to be set to switch after N cycles for the first half period. The hardware has no "polarity" setting. This driver reverses the period cycles (the low length is inverted with the high length) for PWM_POLARITY_INVERSED. Disabling the PWM stops the output immediately (without waiting for the current period to complete first). Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
|
#
2d481b2e |
|
01-Oct-2020 |
Neil Armstrong <narmstrong@baylibre.com> |
pwm: Add driver for Amlogic Meson PWM controller This adds the driver for the PWM controller found in the Amlogic SoCs. This PWM is only a set of Gates, Dividers and Counters: PWM output is achieved by calculating a clock that permits calculating two periods (low and high). The counter then has to be set to switch after N cycles for the first half period. The hardware has no "polarity" setting. This driver reverses the period cycles (the low length is inverted with the high length) for PWM_POLARITY_INVERSED. Disabling the PWM stops the output immediately (without waiting for the current period to complete first). Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
|
#
2d481b2e |
|
01-Oct-2020 |
Neil Armstrong <narmstrong@baylibre.com> |
pwm: Add driver for Amlogic Meson PWM controller This adds the driver for the PWM controller found in the Amlogic SoCs. This PWM is only a set of Gates, Dividers and Counters: PWM output is achieved by calculating a clock that permits calculating two periods (low and high). The counter then has to be set to switch after N cycles for the first half period. The hardware has no "polarity" setting. This driver reverses the period cycles (the low length is inverted with the high length) for PWM_POLARITY_INVERSED. Disabling the PWM stops the output immediately (without waiting for the current period to complete first). Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
|
#
2d481b2e |
|
01-Oct-2020 |
Neil Armstrong <narmstrong@baylibre.com> |
pwm: Add driver for Amlogic Meson PWM controller This adds the driver for the PWM controller found in the Amlogic SoCs. This PWM is only a set of Gates, Dividers and Counters: PWM output is achieved by calculating a clock that permits calculating two periods (low and high). The counter then has to be set to switch after N cycles for the first half period. The hardware has no "polarity" setting. This driver reverses the period cycles (the low length is inverted with the high length) for PWM_POLARITY_INVERSED. Disabling the PWM stops the output immediately (without waiting for the current period to complete first). Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
|
#
2d481b2e |
|
01-Oct-2020 |
Neil Armstrong <narmstrong@baylibre.com> |
pwm: Add driver for Amlogic Meson PWM controller This adds the driver for the PWM controller found in the Amlogic SoCs. This PWM is only a set of Gates, Dividers and Counters: PWM output is achieved by calculating a clock that permits calculating two periods (low and high). The counter then has to be set to switch after N cycles for the first half period. The hardware has no "polarity" setting. This driver reverses the period cycles (the low length is inverted with the high length) for PWM_POLARITY_INVERSED. Disabling the PWM stops the output immediately (without waiting for the current period to complete first). Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
|
#
2d481b2e |
|
01-Oct-2020 |
Neil Armstrong <narmstrong@baylibre.com> |
pwm: Add driver for Amlogic Meson PWM controller This adds the driver for the PWM controller found in the Amlogic SoCs. This PWM is only a set of Gates, Dividers and Counters: PWM output is achieved by calculating a clock that permits calculating two periods (low and high). The counter then has to be set to switch after N cycles for the first half period. The hardware has no "polarity" setting. This driver reverses the period cycles (the low length is inverted with the high length) for PWM_POLARITY_INVERSED. Disabling the PWM stops the output immediately (without waiting for the current period to complete first). Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
|
#
2d481b2e |
|
01-Oct-2020 |
Neil Armstrong <narmstrong@baylibre.com> |
pwm: Add driver for Amlogic Meson PWM controller This adds the driver for the PWM controller found in the Amlogic SoCs. This PWM is only a set of Gates, Dividers and Counters: PWM output is achieved by calculating a clock that permits calculating two periods (low and high). The counter then has to be set to switch after N cycles for the first half period. The hardware has no "polarity" setting. This driver reverses the period cycles (the low length is inverted with the high length) for PWM_POLARITY_INVERSED. Disabling the PWM stops the output immediately (without waiting for the current period to complete first). Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
|
#
2d481b2e |
|
01-Oct-2020 |
Neil Armstrong <narmstrong@baylibre.com> |
pwm: Add driver for Amlogic Meson PWM controller This adds the driver for the PWM controller found in the Amlogic SoCs. This PWM is only a set of Gates, Dividers and Counters: PWM output is achieved by calculating a clock that permits calculating two periods (low and high). The counter then has to be set to switch after N cycles for the first half period. The hardware has no "polarity" setting. This driver reverses the period cycles (the low length is inverted with the high length) for PWM_POLARITY_INVERSED. Disabling the PWM stops the output immediately (without waiting for the current period to complete first). Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
|
#
2d481b2e |
|
01-Oct-2020 |
Neil Armstrong <narmstrong@baylibre.com> |
pwm: Add driver for Amlogic Meson PWM controller This adds the driver for the PWM controller found in the Amlogic SoCs. This PWM is only a set of Gates, Dividers and Counters: PWM output is achieved by calculating a clock that permits calculating two periods (low and high). The counter then has to be set to switch after N cycles for the first half period. The hardware has no "polarity" setting. This driver reverses the period cycles (the low length is inverted with the high length) for PWM_POLARITY_INVERSED. Disabling the PWM stops the output immediately (without waiting for the current period to complete first). Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
|
#
2d481b2e |
|
01-Oct-2020 |
Neil Armstrong <narmstrong@baylibre.com> |
pwm: Add driver for Amlogic Meson PWM controller This adds the driver for the PWM controller found in the Amlogic SoCs. This PWM is only a set of Gates, Dividers and Counters: PWM output is achieved by calculating a clock that permits calculating two periods (low and high). The counter then has to be set to switch after N cycles for the first half period. The hardware has no "polarity" setting. This driver reverses the period cycles (the low length is inverted with the high length) for PWM_POLARITY_INVERSED. Disabling the PWM stops the output immediately (without waiting for the current period to complete first). Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
|
#
2d481b2e |
|
01-Oct-2020 |
Neil Armstrong <narmstrong@baylibre.com> |
pwm: Add driver for Amlogic Meson PWM controller This adds the driver for the PWM controller found in the Amlogic SoCs. This PWM is only a set of Gates, Dividers and Counters: PWM output is achieved by calculating a clock that permits calculating two periods (low and high). The counter then has to be set to switch after N cycles for the first half period. The hardware has no "polarity" setting. This driver reverses the period cycles (the low length is inverted with the high length) for PWM_POLARITY_INVERSED. Disabling the PWM stops the output immediately (without waiting for the current period to complete first). Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
|
#
2d481b2e |
|
01-Oct-2020 |
Neil Armstrong <narmstrong@baylibre.com> |
pwm: Add driver for Amlogic Meson PWM controller This adds the driver for the PWM controller found in the Amlogic SoCs. This PWM is only a set of Gates, Dividers and Counters: PWM output is achieved by calculating a clock that permits calculating two periods (low and high). The counter then has to be set to switch after N cycles for the first half period. The hardware has no "polarity" setting. This driver reverses the period cycles (the low length is inverted with the high length) for PWM_POLARITY_INVERSED. Disabling the PWM stops the output immediately (without waiting for the current period to complete first). Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
|
#
2d481b2e |
|
01-Oct-2020 |
Neil Armstrong <narmstrong@baylibre.com> |
pwm: Add driver for Amlogic Meson PWM controller This adds the driver for the PWM controller found in the Amlogic SoCs. This PWM is only a set of Gates, Dividers and Counters: PWM output is achieved by calculating a clock that permits calculating two periods (low and high). The counter then has to be set to switch after N cycles for the first half period. The hardware has no "polarity" setting. This driver reverses the period cycles (the low length is inverted with the high length) for PWM_POLARITY_INVERSED. Disabling the PWM stops the output immediately (without waiting for the current period to complete first). Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
|
#
2d481b2e |
|
01-Oct-2020 |
Neil Armstrong <narmstrong@baylibre.com> |
pwm: Add driver for Amlogic Meson PWM controller This adds the driver for the PWM controller found in the Amlogic SoCs. This PWM is only a set of Gates, Dividers and Counters: PWM output is achieved by calculating a clock that permits calculating two periods (low and high). The counter then has to be set to switch after N cycles for the first half period. The hardware has no "polarity" setting. This driver reverses the period cycles (the low length is inverted with the high length) for PWM_POLARITY_INVERSED. Disabling the PWM stops the output immediately (without waiting for the current period to complete first). Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
|
#
2d481b2e |
|
01-Oct-2020 |
Neil Armstrong <narmstrong@baylibre.com> |
pwm: Add driver for Amlogic Meson PWM controller This adds the driver for the PWM controller found in the Amlogic SoCs. This PWM is only a set of Gates, Dividers and Counters: PWM output is achieved by calculating a clock that permits calculating two periods (low and high). The counter then has to be set to switch after N cycles for the first half period. The hardware has no "polarity" setting. This driver reverses the period cycles (the low length is inverted with the high length) for PWM_POLARITY_INVERSED. Disabling the PWM stops the output immediately (without waiting for the current period to complete first). Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
|
#
2d481b2e |
|
01-Oct-2020 |
Neil Armstrong <narmstrong@baylibre.com> |
pwm: Add driver for Amlogic Meson PWM controller This adds the driver for the PWM controller found in the Amlogic SoCs. This PWM is only a set of Gates, Dividers and Counters: PWM output is achieved by calculating a clock that permits calculating two periods (low and high). The counter then has to be set to switch after N cycles for the first half period. The hardware has no "polarity" setting. This driver reverses the period cycles (the low length is inverted with the high length) for PWM_POLARITY_INVERSED. Disabling the PWM stops the output immediately (without waiting for the current period to complete first). Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
|
#
2d481b2e |
|
01-Oct-2020 |
Neil Armstrong <narmstrong@baylibre.com> |
pwm: Add driver for Amlogic Meson PWM controller This adds the driver for the PWM controller found in the Amlogic SoCs. This PWM is only a set of Gates, Dividers and Counters: PWM output is achieved by calculating a clock that permits calculating two periods (low and high). The counter then has to be set to switch after N cycles for the first half period. The hardware has no "polarity" setting. This driver reverses the period cycles (the low length is inverted with the high length) for PWM_POLARITY_INVERSED. Disabling the PWM stops the output immediately (without waiting for the current period to complete first). Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
|
#
2d481b2e |
|
01-Oct-2020 |
Neil Armstrong <narmstrong@baylibre.com> |
pwm: Add driver for Amlogic Meson PWM controller This adds the driver for the PWM controller found in the Amlogic SoCs. This PWM is only a set of Gates, Dividers and Counters: PWM output is achieved by calculating a clock that permits calculating two periods (low and high). The counter then has to be set to switch after N cycles for the first half period. The hardware has no "polarity" setting. This driver reverses the period cycles (the low length is inverted with the high length) for PWM_POLARITY_INVERSED. Disabling the PWM stops the output immediately (without waiting for the current period to complete first). Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
|
#
2d481b2e |
|
01-Oct-2020 |
Neil Armstrong <narmstrong@baylibre.com> |
pwm: Add driver for Amlogic Meson PWM controller This adds the driver for the PWM controller found in the Amlogic SoCs. This PWM is only a set of Gates, Dividers and Counters: PWM output is achieved by calculating a clock that permits calculating two periods (low and high). The counter then has to be set to switch after N cycles for the first half period. The hardware has no "polarity" setting. This driver reverses the period cycles (the low length is inverted with the high length) for PWM_POLARITY_INVERSED. Disabling the PWM stops the output immediately (without waiting for the current period to complete first). Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
|
#
2d481b2e |
|
01-Oct-2020 |
Neil Armstrong <narmstrong@baylibre.com> |
pwm: Add driver for Amlogic Meson PWM controller This adds the driver for the PWM controller found in the Amlogic SoCs. This PWM is only a set of Gates, Dividers and Counters: PWM output is achieved by calculating a clock that permits calculating two periods (low and high). The counter then has to be set to switch after N cycles for the first half period. The hardware has no "polarity" setting. This driver reverses the period cycles (the low length is inverted with the high length) for PWM_POLARITY_INVERSED. Disabling the PWM stops the output immediately (without waiting for the current period to complete first). Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
|
#
2d481b2e |
|
01-Oct-2020 |
Neil Armstrong <narmstrong@baylibre.com> |
pwm: Add driver for Amlogic Meson PWM controller This adds the driver for the PWM controller found in the Amlogic SoCs. This PWM is only a set of Gates, Dividers and Counters: PWM output is achieved by calculating a clock that permits calculating two periods (low and high). The counter then has to be set to switch after N cycles for the first half period. The hardware has no "polarity" setting. This driver reverses the period cycles (the low length is inverted with the high length) for PWM_POLARITY_INVERSED. Disabling the PWM stops the output immediately (without waiting for the current period to complete first). Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
|
#
2d481b2e |
|
01-Oct-2020 |
Neil Armstrong <narmstrong@baylibre.com> |
pwm: Add driver for Amlogic Meson PWM controller This adds the driver for the PWM controller found in the Amlogic SoCs. This PWM is only a set of Gates, Dividers and Counters: PWM output is achieved by calculating a clock that permits calculating two periods (low and high). The counter then has to be set to switch after N cycles for the first half period. The hardware has no "polarity" setting. This driver reverses the period cycles (the low length is inverted with the high length) for PWM_POLARITY_INVERSED. Disabling the PWM stops the output immediately (without waiting for the current period to complete first). Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
|
#
2d481b2e |
|
01-Oct-2020 |
Neil Armstrong <narmstrong@baylibre.com> |
pwm: Add driver for Amlogic Meson PWM controller This adds the driver for the PWM controller found in the Amlogic SoCs. This PWM is only a set of Gates, Dividers and Counters: PWM output is achieved by calculating a clock that permits calculating two periods (low and high). The counter then has to be set to switch after N cycles for the first half period. The hardware has no "polarity" setting. This driver reverses the period cycles (the low length is inverted with the high length) for PWM_POLARITY_INVERSED. Disabling the PWM stops the output immediately (without waiting for the current period to complete first). Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
|
#
2d481b2e |
|
01-Oct-2020 |
Neil Armstrong <narmstrong@baylibre.com> |
pwm: Add driver for Amlogic Meson PWM controller This adds the driver for the PWM controller found in the Amlogic SoCs. This PWM is only a set of Gates, Dividers and Counters: PWM output is achieved by calculating a clock that permits calculating two periods (low and high). The counter then has to be set to switch after N cycles for the first half period. The hardware has no "polarity" setting. This driver reverses the period cycles (the low length is inverted with the high length) for PWM_POLARITY_INVERSED. Disabling the PWM stops the output immediately (without waiting for the current period to complete first). Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
|
#
2d481b2e |
|
01-Oct-2020 |
Neil Armstrong <narmstrong@baylibre.com> |
pwm: Add driver for Amlogic Meson PWM controller This adds the driver for the PWM controller found in the Amlogic SoCs. This PWM is only a set of Gates, Dividers and Counters: PWM output is achieved by calculating a clock that permits calculating two periods (low and high). The counter then has to be set to switch after N cycles for the first half period. The hardware has no "polarity" setting. This driver reverses the period cycles (the low length is inverted with the high length) for PWM_POLARITY_INVERSED. Disabling the PWM stops the output immediately (without waiting for the current period to complete first). Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
|
#
2d481b2e |
|
01-Oct-2020 |
Neil Armstrong <narmstrong@baylibre.com> |
pwm: Add driver for Amlogic Meson PWM controller This adds the driver for the PWM controller found in the Amlogic SoCs. This PWM is only a set of Gates, Dividers and Counters: PWM output is achieved by calculating a clock that permits calculating two periods (low and high). The counter then has to be set to switch after N cycles for the first half period. The hardware has no "polarity" setting. This driver reverses the period cycles (the low length is inverted with the high length) for PWM_POLARITY_INVERSED. Disabling the PWM stops the output immediately (without waiting for the current period to complete first). Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
|
#
2d481b2e |
|
01-Oct-2020 |
Neil Armstrong <narmstrong@baylibre.com> |
pwm: Add driver for Amlogic Meson PWM controller This adds the driver for the PWM controller found in the Amlogic SoCs. This PWM is only a set of Gates, Dividers and Counters: PWM output is achieved by calculating a clock that permits calculating two periods (low and high). The counter then has to be set to switch after N cycles for the first half period. The hardware has no "polarity" setting. This driver reverses the period cycles (the low length is inverted with the high length) for PWM_POLARITY_INVERSED. Disabling the PWM stops the output immediately (without waiting for the current period to complete first). Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
|
#
2d481b2e |
|
01-Oct-2020 |
Neil Armstrong <narmstrong@baylibre.com> |
pwm: Add driver for Amlogic Meson PWM controller This adds the driver for the PWM controller found in the Amlogic SoCs. This PWM is only a set of Gates, Dividers and Counters: PWM output is achieved by calculating a clock that permits calculating two periods (low and high). The counter then has to be set to switch after N cycles for the first half period. The hardware has no "polarity" setting. This driver reverses the period cycles (the low length is inverted with the high length) for PWM_POLARITY_INVERSED. Disabling the PWM stops the output immediately (without waiting for the current period to complete first). Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
|
#
2d481b2e |
|
01-Oct-2020 |
Neil Armstrong <narmstrong@baylibre.com> |
pwm: Add driver for Amlogic Meson PWM controller This adds the driver for the PWM controller found in the Amlogic SoCs. This PWM is only a set of Gates, Dividers and Counters: PWM output is achieved by calculating a clock that permits calculating two periods (low and high). The counter then has to be set to switch after N cycles for the first half period. The hardware has no "polarity" setting. This driver reverses the period cycles (the low length is inverted with the high length) for PWM_POLARITY_INVERSED. Disabling the PWM stops the output immediately (without waiting for the current period to complete first). Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
|
#
2d481b2e |
|
01-Oct-2020 |
Neil Armstrong <narmstrong@baylibre.com> |
pwm: Add driver for Amlogic Meson PWM controller This adds the driver for the PWM controller found in the Amlogic SoCs. This PWM is only a set of Gates, Dividers and Counters: PWM output is achieved by calculating a clock that permits calculating two periods (low and high). The counter then has to be set to switch after N cycles for the first half period. The hardware has no "polarity" setting. This driver reverses the period cycles (the low length is inverted with the high length) for PWM_POLARITY_INVERSED. Disabling the PWM stops the output immediately (without waiting for the current period to complete first). Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
|
#
2d481b2e |
|
01-Oct-2020 |
Neil Armstrong <narmstrong@baylibre.com> |
pwm: Add driver for Amlogic Meson PWM controller This adds the driver for the PWM controller found in the Amlogic SoCs. This PWM is only a set of Gates, Dividers and Counters: PWM output is achieved by calculating a clock that permits calculating two periods (low and high). The counter then has to be set to switch after N cycles for the first half period. The hardware has no "polarity" setting. This driver reverses the period cycles (the low length is inverted with the high length) for PWM_POLARITY_INVERSED. Disabling the PWM stops the output immediately (without waiting for the current period to complete first). Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
|
#
2d481b2e |
|
01-Oct-2020 |
Neil Armstrong <narmstrong@baylibre.com> |
pwm: Add driver for Amlogic Meson PWM controller This adds the driver for the PWM controller found in the Amlogic SoCs. This PWM is only a set of Gates, Dividers and Counters: PWM output is achieved by calculating a clock that permits calculating two periods (low and high). The counter then has to be set to switch after N cycles for the first half period. The hardware has no "polarity" setting. This driver reverses the period cycles (the low length is inverted with the high length) for PWM_POLARITY_INVERSED. Disabling the PWM stops the output immediately (without waiting for the current period to complete first). Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
|
#
2d481b2e |
|
01-Oct-2020 |
Neil Armstrong <narmstrong@baylibre.com> |
pwm: Add driver for Amlogic Meson PWM controller This adds the driver for the PWM controller found in the Amlogic SoCs. This PWM is only a set of Gates, Dividers and Counters: PWM output is achieved by calculating a clock that permits calculating two periods (low and high). The counter then has to be set to switch after N cycles for the first half period. The hardware has no "polarity" setting. This driver reverses the period cycles (the low length is inverted with the high length) for PWM_POLARITY_INVERSED. Disabling the PWM stops the output immediately (without waiting for the current period to complete first). Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
|
#
2d481b2e |
|
01-Oct-2020 |
Neil Armstrong <narmstrong@baylibre.com> |
pwm: Add driver for Amlogic Meson PWM controller This adds the driver for the PWM controller found in the Amlogic SoCs. This PWM is only a set of Gates, Dividers and Counters: PWM output is achieved by calculating a clock that permits calculating two periods (low and high). The counter then has to be set to switch after N cycles for the first half period. The hardware has no "polarity" setting. This driver reverses the period cycles (the low length is inverted with the high length) for PWM_POLARITY_INVERSED. Disabling the PWM stops the output immediately (without waiting for the current period to complete first). Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
|
#
2d481b2e |
|
01-Oct-2020 |
Neil Armstrong <narmstrong@baylibre.com> |
pwm: Add driver for Amlogic Meson PWM controller This adds the driver for the PWM controller found in the Amlogic SoCs. This PWM is only a set of Gates, Dividers and Counters: PWM output is achieved by calculating a clock that permits calculating two periods (low and high). The counter then has to be set to switch after N cycles for the first half period. The hardware has no "polarity" setting. This driver reverses the period cycles (the low length is inverted with the high length) for PWM_POLARITY_INVERSED. Disabling the PWM stops the output immediately (without waiting for the current period to complete first). Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
|
#
2d481b2e |
|
01-Oct-2020 |
Neil Armstrong <narmstrong@baylibre.com> |
pwm: Add driver for Amlogic Meson PWM controller This adds the driver for the PWM controller found in the Amlogic SoCs. This PWM is only a set of Gates, Dividers and Counters: PWM output is achieved by calculating a clock that permits calculating two periods (low and high). The counter then has to be set to switch after N cycles for the first half period. The hardware has no "polarity" setting. This driver reverses the period cycles (the low length is inverted with the high length) for PWM_POLARITY_INVERSED. Disabling the PWM stops the output immediately (without waiting for the current period to complete first). Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
|
#
2d481b2e |
|
01-Oct-2020 |
Neil Armstrong <narmstrong@baylibre.com> |
pwm: Add driver for Amlogic Meson PWM controller This adds the driver for the PWM controller found in the Amlogic SoCs. This PWM is only a set of Gates, Dividers and Counters: PWM output is achieved by calculating a clock that permits calculating two periods (low and high). The counter then has to be set to switch after N cycles for the first half period. The hardware has no "polarity" setting. This driver reverses the period cycles (the low length is inverted with the high length) for PWM_POLARITY_INVERSED. Disabling the PWM stops the output immediately (without waiting for the current period to complete first). Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
|
#
2d481b2e |
|
01-Oct-2020 |
Neil Armstrong <narmstrong@baylibre.com> |
pwm: Add driver for Amlogic Meson PWM controller This adds the driver for the PWM controller found in the Amlogic SoCs. This PWM is only a set of Gates, Dividers and Counters: PWM output is achieved by calculating a clock that permits calculating two periods (low and high). The counter then has to be set to switch after N cycles for the first half period. The hardware has no "polarity" setting. This driver reverses the period cycles (the low length is inverted with the high length) for PWM_POLARITY_INVERSED. Disabling the PWM stops the output immediately (without waiting for the current period to complete first). Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
|
#
2d481b2e |
|
01-Oct-2020 |
Neil Armstrong <narmstrong@baylibre.com> |
pwm: Add driver for Amlogic Meson PWM controller This adds the driver for the PWM controller found in the Amlogic SoCs. This PWM is only a set of Gates, Dividers and Counters: PWM output is achieved by calculating a clock that permits calculating two periods (low and high). The counter then has to be set to switch after N cycles for the first half period. The hardware has no "polarity" setting. This driver reverses the period cycles (the low length is inverted with the high length) for PWM_POLARITY_INVERSED. Disabling the PWM stops the output immediately (without waiting for the current period to complete first). Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
|
#
2d481b2e |
|
01-Oct-2020 |
Neil Armstrong <narmstrong@baylibre.com> |
pwm: Add driver for Amlogic Meson PWM controller This adds the driver for the PWM controller found in the Amlogic SoCs. This PWM is only a set of Gates, Dividers and Counters: PWM output is achieved by calculating a clock that permits calculating two periods (low and high). The counter then has to be set to switch after N cycles for the first half period. The hardware has no "polarity" setting. This driver reverses the period cycles (the low length is inverted with the high length) for PWM_POLARITY_INVERSED. Disabling the PWM stops the output immediately (without waiting for the current period to complete first). Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
|
#
2d481b2e |
|
01-Oct-2020 |
Neil Armstrong <narmstrong@baylibre.com> |
pwm: Add driver for Amlogic Meson PWM controller This adds the driver for the PWM controller found in the Amlogic SoCs. This PWM is only a set of Gates, Dividers and Counters: PWM output is achieved by calculating a clock that permits calculating two periods (low and high). The counter then has to be set to switch after N cycles for the first half period. The hardware has no "polarity" setting. This driver reverses the period cycles (the low length is inverted with the high length) for PWM_POLARITY_INVERSED. Disabling the PWM stops the output immediately (without waiting for the current period to complete first). Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
|
#
2d481b2e |
|
01-Oct-2020 |
Neil Armstrong <narmstrong@baylibre.com> |
pwm: Add driver for Amlogic Meson PWM controller This adds the driver for the PWM controller found in the Amlogic SoCs. This PWM is only a set of Gates, Dividers and Counters: PWM output is achieved by calculating a clock that permits calculating two periods (low and high). The counter then has to be set to switch after N cycles for the first half period. The hardware has no "polarity" setting. This driver reverses the period cycles (the low length is inverted with the high length) for PWM_POLARITY_INVERSED. Disabling the PWM stops the output immediately (without waiting for the current period to complete first). Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
|
#
2d481b2e |
|
01-Oct-2020 |
Neil Armstrong <narmstrong@baylibre.com> |
pwm: Add driver for Amlogic Meson PWM controller This adds the driver for the PWM controller found in the Amlogic SoCs. This PWM is only a set of Gates, Dividers and Counters: PWM output is achieved by calculating a clock that permits calculating two periods (low and high). The counter then has to be set to switch after N cycles for the first half period. The hardware has no "polarity" setting. This driver reverses the period cycles (the low length is inverted with the high length) for PWM_POLARITY_INVERSED. Disabling the PWM stops the output immediately (without waiting for the current period to complete first). Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
|
#
2d481b2e |
|
01-Oct-2020 |
Neil Armstrong <narmstrong@baylibre.com> |
pwm: Add driver for Amlogic Meson PWM controller This adds the driver for the PWM controller found in the Amlogic SoCs. This PWM is only a set of Gates, Dividers and Counters: PWM output is achieved by calculating a clock that permits calculating two periods (low and high). The counter then has to be set to switch after N cycles for the first half period. The hardware has no "polarity" setting. This driver reverses the period cycles (the low length is inverted with the high length) for PWM_POLARITY_INVERSED. Disabling the PWM stops the output immediately (without waiting for the current period to complete first). Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
|
#
2d481b2e |
|
01-Oct-2020 |
Neil Armstrong <narmstrong@baylibre.com> |
pwm: Add driver for Amlogic Meson PWM controller This adds the driver for the PWM controller found in the Amlogic SoCs. This PWM is only a set of Gates, Dividers and Counters: PWM output is achieved by calculating a clock that permits calculating two periods (low and high). The counter then has to be set to switch after N cycles for the first half period. The hardware has no "polarity" setting. This driver reverses the period cycles (the low length is inverted with the high length) for PWM_POLARITY_INVERSED. Disabling the PWM stops the output immediately (without waiting for the current period to complete first). Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
|
#
2d481b2e |
|
01-Oct-2020 |
Neil Armstrong <narmstrong@baylibre.com> |
pwm: Add driver for Amlogic Meson PWM controller This adds the driver for the PWM controller found in the Amlogic SoCs. This PWM is only a set of Gates, Dividers and Counters: PWM output is achieved by calculating a clock that permits calculating two periods (low and high). The counter then has to be set to switch after N cycles for the first half period. The hardware has no "polarity" setting. This driver reverses the period cycles (the low length is inverted with the high length) for PWM_POLARITY_INVERSED. Disabling the PWM stops the output immediately (without waiting for the current period to complete first). Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
|
#
2d481b2e |
|
01-Oct-2020 |
Neil Armstrong <narmstrong@baylibre.com> |
pwm: Add driver for Amlogic Meson PWM controller This adds the driver for the PWM controller found in the Amlogic SoCs. This PWM is only a set of Gates, Dividers and Counters: PWM output is achieved by calculating a clock that permits calculating two periods (low and high). The counter then has to be set to switch after N cycles for the first half period. The hardware has no "polarity" setting. This driver reverses the period cycles (the low length is inverted with the high length) for PWM_POLARITY_INVERSED. Disabling the PWM stops the output immediately (without waiting for the current period to complete first). Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
|
#
2d481b2e |
|
01-Oct-2020 |
Neil Armstrong <narmstrong@baylibre.com> |
pwm: Add driver for Amlogic Meson PWM controller This adds the driver for the PWM controller found in the Amlogic SoCs. This PWM is only a set of Gates, Dividers and Counters: PWM output is achieved by calculating a clock that permits calculating two periods (low and high). The counter then has to be set to switch after N cycles for the first half period. The hardware has no "polarity" setting. This driver reverses the period cycles (the low length is inverted with the high length) for PWM_POLARITY_INVERSED. Disabling the PWM stops the output immediately (without waiting for the current period to complete first). Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
|
#
2d481b2e |
|
01-Oct-2020 |
Neil Armstrong <narmstrong@baylibre.com> |
pwm: Add driver for Amlogic Meson PWM controller This adds the driver for the PWM controller found in the Amlogic SoCs. This PWM is only a set of Gates, Dividers and Counters: PWM output is achieved by calculating a clock that permits calculating two periods (low and high). The counter then has to be set to switch after N cycles for the first half period. The hardware has no "polarity" setting. This driver reverses the period cycles (the low length is inverted with the high length) for PWM_POLARITY_INVERSED. Disabling the PWM stops the output immediately (without waiting for the current period to complete first). Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
|
#
2d481b2e |
|
01-Oct-2020 |
Neil Armstrong <narmstrong@baylibre.com> |
pwm: Add driver for Amlogic Meson PWM controller This adds the driver for the PWM controller found in the Amlogic SoCs. This PWM is only a set of Gates, Dividers and Counters: PWM output is achieved by calculating a clock that permits calculating two periods (low and high). The counter then has to be set to switch after N cycles for the first half period. The hardware has no "polarity" setting. This driver reverses the period cycles (the low length is inverted with the high length) for PWM_POLARITY_INVERSED. Disabling the PWM stops the output immediately (without waiting for the current period to complete first). Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
|
#
2d481b2e |
|
01-Oct-2020 |
Neil Armstrong <narmstrong@baylibre.com> |
pwm: Add driver for Amlogic Meson PWM controller This adds the driver for the PWM controller found in the Amlogic SoCs. This PWM is only a set of Gates, Dividers and Counters: PWM output is achieved by calculating a clock that permits calculating two periods (low and high). The counter then has to be set to switch after N cycles for the first half period. The hardware has no "polarity" setting. This driver reverses the period cycles (the low length is inverted with the high length) for PWM_POLARITY_INVERSED. Disabling the PWM stops the output immediately (without waiting for the current period to complete first). Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
|
#
2d481b2e |
|
01-Oct-2020 |
Neil Armstrong <narmstrong@baylibre.com> |
pwm: Add driver for Amlogic Meson PWM controller This adds the driver for the PWM controller found in the Amlogic SoCs. This PWM is only a set of Gates, Dividers and Counters: PWM output is achieved by calculating a clock that permits calculating two periods (low and high). The counter then has to be set to switch after N cycles for the first half period. The hardware has no "polarity" setting. This driver reverses the period cycles (the low length is inverted with the high length) for PWM_POLARITY_INVERSED. Disabling the PWM stops the output immediately (without waiting for the current period to complete first). Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
|
#
2d481b2e |
|
01-Oct-2020 |
Neil Armstrong <narmstrong@baylibre.com> |
pwm: Add driver for Amlogic Meson PWM controller This adds the driver for the PWM controller found in the Amlogic SoCs. This PWM is only a set of Gates, Dividers and Counters: PWM output is achieved by calculating a clock that permits calculating two periods (low and high). The counter then has to be set to switch after N cycles for the first half period. The hardware has no "polarity" setting. This driver reverses the period cycles (the low length is inverted with the high length) for PWM_POLARITY_INVERSED. Disabling the PWM stops the output immediately (without waiting for the current period to complete first). Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
|
#
2d481b2e |
|
01-Oct-2020 |
Neil Armstrong <narmstrong@baylibre.com> |
pwm: Add driver for Amlogic Meson PWM controller This adds the driver for the PWM controller found in the Amlogic SoCs. This PWM is only a set of Gates, Dividers and Counters: PWM output is achieved by calculating a clock that permits calculating two periods (low and high). The counter then has to be set to switch after N cycles for the first half period. The hardware has no "polarity" setting. This driver reverses the period cycles (the low length is inverted with the high length) for PWM_POLARITY_INVERSED. Disabling the PWM stops the output immediately (without waiting for the current period to complete first). Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
|
#
2d481b2e |
|
01-Oct-2020 |
Neil Armstrong <narmstrong@baylibre.com> |
pwm: Add driver for Amlogic Meson PWM controller This adds the driver for the PWM controller found in the Amlogic SoCs. This PWM is only a set of Gates, Dividers and Counters: PWM output is achieved by calculating a clock that permits calculating two periods (low and high). The counter then has to be set to switch after N cycles for the first half period. The hardware has no "polarity" setting. This driver reverses the period cycles (the low length is inverted with the high length) for PWM_POLARITY_INVERSED. Disabling the PWM stops the output immediately (without waiting for the current period to complete first). Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
|
#
2d481b2e |
|
01-Oct-2020 |
Neil Armstrong <narmstrong@baylibre.com> |
pwm: Add driver for Amlogic Meson PWM controller This adds the driver for the PWM controller found in the Amlogic SoCs. This PWM is only a set of Gates, Dividers and Counters: PWM output is achieved by calculating a clock that permits calculating two periods (low and high). The counter then has to be set to switch after N cycles for the first half period. The hardware has no "polarity" setting. This driver reverses the period cycles (the low length is inverted with the high length) for PWM_POLARITY_INVERSED. Disabling the PWM stops the output immediately (without waiting for the current period to complete first). Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
|
#
2d481b2e |
|
01-Oct-2020 |
Neil Armstrong <narmstrong@baylibre.com> |
pwm: Add driver for Amlogic Meson PWM controller This adds the driver for the PWM controller found in the Amlogic SoCs. This PWM is only a set of Gates, Dividers and Counters: PWM output is achieved by calculating a clock that permits calculating two periods (low and high). The counter then has to be set to switch after N cycles for the first half period. The hardware has no "polarity" setting. This driver reverses the period cycles (the low length is inverted with the high length) for PWM_POLARITY_INVERSED. Disabling the PWM stops the output immediately (without waiting for the current period to complete first). Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
|
#
2d481b2e |
|
01-Oct-2020 |
Neil Armstrong <narmstrong@baylibre.com> |
pwm: Add driver for Amlogic Meson PWM controller This adds the driver for the PWM controller found in the Amlogic SoCs. This PWM is only a set of Gates, Dividers and Counters: PWM output is achieved by calculating a clock that permits calculating two periods (low and high). The counter then has to be set to switch after N cycles for the first half period. The hardware has no "polarity" setting. This driver reverses the period cycles (the low length is inverted with the high length) for PWM_POLARITY_INVERSED. Disabling the PWM stops the output immediately (without waiting for the current period to complete first). Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
|
#
2d481b2e |
|
01-Oct-2020 |
Neil Armstrong <narmstrong@baylibre.com> |
pwm: Add driver for Amlogic Meson PWM controller This adds the driver for the PWM controller found in the Amlogic SoCs. This PWM is only a set of Gates, Dividers and Counters: PWM output is achieved by calculating a clock that permits calculating two periods (low and high). The counter then has to be set to switch after N cycles for the first half period. The hardware has no "polarity" setting. This driver reverses the period cycles (the low length is inverted with the high length) for PWM_POLARITY_INVERSED. Disabling the PWM stops the output immediately (without waiting for the current period to complete first). Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
|
#
2d481b2e |
|
01-Oct-2020 |
Neil Armstrong <narmstrong@baylibre.com> |
pwm: Add driver for Amlogic Meson PWM controller This adds the driver for the PWM controller found in the Amlogic SoCs. This PWM is only a set of Gates, Dividers and Counters: PWM output is achieved by calculating a clock that permits calculating two periods (low and high). The counter then has to be set to switch after N cycles for the first half period. The hardware has no "polarity" setting. This driver reverses the period cycles (the low length is inverted with the high length) for PWM_POLARITY_INVERSED. Disabling the PWM stops the output immediately (without waiting for the current period to complete first). Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
|
#
2d481b2e |
|
01-Oct-2020 |
Neil Armstrong <narmstrong@baylibre.com> |
pwm: Add driver for Amlogic Meson PWM controller This adds the driver for the PWM controller found in the Amlogic SoCs. This PWM is only a set of Gates, Dividers and Counters: PWM output is achieved by calculating a clock that permits calculating two periods (low and high). The counter then has to be set to switch after N cycles for the first half period. The hardware has no "polarity" setting. This driver reverses the period cycles (the low length is inverted with the high length) for PWM_POLARITY_INVERSED. Disabling the PWM stops the output immediately (without waiting for the current period to complete first). Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
|
#
2d481b2e |
|
01-Oct-2020 |
Neil Armstrong <narmstrong@baylibre.com> |
pwm: Add driver for Amlogic Meson PWM controller This adds the driver for the PWM controller found in the Amlogic SoCs. This PWM is only a set of Gates, Dividers and Counters: PWM output is achieved by calculating a clock that permits calculating two periods (low and high). The counter then has to be set to switch after N cycles for the first half period. The hardware has no "polarity" setting. This driver reverses the period cycles (the low length is inverted with the high length) for PWM_POLARITY_INVERSED. Disabling the PWM stops the output immediately (without waiting for the current period to complete first). Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
|
#
2d481b2e |
|
01-Oct-2020 |
Neil Armstrong <narmstrong@baylibre.com> |
pwm: Add driver for Amlogic Meson PWM controller This adds the driver for the PWM controller found in the Amlogic SoCs. This PWM is only a set of Gates, Dividers and Counters: PWM output is achieved by calculating a clock that permits calculating two periods (low and high). The counter then has to be set to switch after N cycles for the first half period. The hardware has no "polarity" setting. This driver reverses the period cycles (the low length is inverted with the high length) for PWM_POLARITY_INVERSED. Disabling the PWM stops the output immediately (without waiting for the current period to complete first). Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
|
#
2d481b2e |
|
01-Oct-2020 |
Neil Armstrong <narmstrong@baylibre.com> |
pwm: Add driver for Amlogic Meson PWM controller This adds the driver for the PWM controller found in the Amlogic SoCs. This PWM is only a set of Gates, Dividers and Counters: PWM output is achieved by calculating a clock that permits calculating two periods (low and high). The counter then has to be set to switch after N cycles for the first half period. The hardware has no "polarity" setting. This driver reverses the period cycles (the low length is inverted with the high length) for PWM_POLARITY_INVERSED. Disabling the PWM stops the output immediately (without waiting for the current period to complete first). Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
|
#
2d481b2e |
|
01-Oct-2020 |
Neil Armstrong <narmstrong@baylibre.com> |
pwm: Add driver for Amlogic Meson PWM controller This adds the driver for the PWM controller found in the Amlogic SoCs. This PWM is only a set of Gates, Dividers and Counters: PWM output is achieved by calculating a clock that permits calculating two periods (low and high). The counter then has to be set to switch after N cycles for the first half period. The hardware has no "polarity" setting. This driver reverses the period cycles (the low length is inverted with the high length) for PWM_POLARITY_INVERSED. Disabling the PWM stops the output immediately (without waiting for the current period to complete first). Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
|
#
2d481b2e |
|
01-Oct-2020 |
Neil Armstrong <narmstrong@baylibre.com> |
pwm: Add driver for Amlogic Meson PWM controller This adds the driver for the PWM controller found in the Amlogic SoCs. This PWM is only a set of Gates, Dividers and Counters: PWM output is achieved by calculating a clock that permits calculating two periods (low and high). The counter then has to be set to switch after N cycles for the first half period. The hardware has no "polarity" setting. This driver reverses the period cycles (the low length is inverted with the high length) for PWM_POLARITY_INVERSED. Disabling the PWM stops the output immediately (without waiting for the current period to complete first). Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
|
#
2d481b2e |
|
01-Oct-2020 |
Neil Armstrong <narmstrong@baylibre.com> |
pwm: Add driver for Amlogic Meson PWM controller This adds the driver for the PWM controller found in the Amlogic SoCs. This PWM is only a set of Gates, Dividers and Counters: PWM output is achieved by calculating a clock that permits calculating two periods (low and high). The counter then has to be set to switch after N cycles for the first half period. The hardware has no "polarity" setting. This driver reverses the period cycles (the low length is inverted with the high length) for PWM_POLARITY_INVERSED. Disabling the PWM stops the output immediately (without waiting for the current period to complete first). Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
|
#
2d481b2e |
|
01-Oct-2020 |
Neil Armstrong <narmstrong@baylibre.com> |
pwm: Add driver for Amlogic Meson PWM controller This adds the driver for the PWM controller found in the Amlogic SoCs. This PWM is only a set of Gates, Dividers and Counters: PWM output is achieved by calculating a clock that permits calculating two periods (low and high). The counter then has to be set to switch after N cycles for the first half period. The hardware has no "polarity" setting. This driver reverses the period cycles (the low length is inverted with the high length) for PWM_POLARITY_INVERSED. Disabling the PWM stops the output immediately (without waiting for the current period to complete first). Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
|
#
2d481b2e |
|
01-Oct-2020 |
Neil Armstrong <narmstrong@baylibre.com> |
pwm: Add driver for Amlogic Meson PWM controller This adds the driver for the PWM controller found in the Amlogic SoCs. This PWM is only a set of Gates, Dividers and Counters: PWM output is achieved by calculating a clock that permits calculating two periods (low and high). The counter then has to be set to switch after N cycles for the first half period. The hardware has no "polarity" setting. This driver reverses the period cycles (the low length is inverted with the high length) for PWM_POLARITY_INVERSED. Disabling the PWM stops the output immediately (without waiting for the current period to complete first). Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
|
#
2d481b2e |
|
01-Oct-2020 |
Neil Armstrong <narmstrong@baylibre.com> |
pwm: Add driver for Amlogic Meson PWM controller This adds the driver for the PWM controller found in the Amlogic SoCs. This PWM is only a set of Gates, Dividers and Counters: PWM output is achieved by calculating a clock that permits calculating two periods (low and high). The counter then has to be set to switch after N cycles for the first half period. The hardware has no "polarity" setting. This driver reverses the period cycles (the low length is inverted with the high length) for PWM_POLARITY_INVERSED. Disabling the PWM stops the output immediately (without waiting for the current period to complete first). Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
|
#
2d481b2e |
|
01-Oct-2020 |
Neil Armstrong <narmstrong@baylibre.com> |
pwm: Add driver for Amlogic Meson PWM controller This adds the driver for the PWM controller found in the Amlogic SoCs. This PWM is only a set of Gates, Dividers and Counters: PWM output is achieved by calculating a clock that permits calculating two periods (low and high). The counter then has to be set to switch after N cycles for the first half period. The hardware has no "polarity" setting. This driver reverses the period cycles (the low length is inverted with the high length) for PWM_POLARITY_INVERSED. Disabling the PWM stops the output immediately (without waiting for the current period to complete first). Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
|
#
2d481b2e |
|
01-Oct-2020 |
Neil Armstrong <narmstrong@baylibre.com> |
pwm: Add driver for Amlogic Meson PWM controller This adds the driver for the PWM controller found in the Amlogic SoCs. This PWM is only a set of Gates, Dividers and Counters: PWM output is achieved by calculating a clock that permits calculating two periods (low and high). The counter then has to be set to switch after N cycles for the first half period. The hardware has no "polarity" setting. This driver reverses the period cycles (the low length is inverted with the high length) for PWM_POLARITY_INVERSED. Disabling the PWM stops the output immediately (without waiting for the current period to complete first). Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
|
#
2d481b2e |
|
01-Oct-2020 |
Neil Armstrong <narmstrong@baylibre.com> |
pwm: Add driver for Amlogic Meson PWM controller This adds the driver for the PWM controller found in the Amlogic SoCs. This PWM is only a set of Gates, Dividers and Counters: PWM output is achieved by calculating a clock that permits calculating two periods (low and high). The counter then has to be set to switch after N cycles for the first half period. The hardware has no "polarity" setting. This driver reverses the period cycles (the low length is inverted with the high length) for PWM_POLARITY_INVERSED. Disabling the PWM stops the output immediately (without waiting for the current period to complete first). Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
|
#
2d481b2e |
|
01-Oct-2020 |
Neil Armstrong <narmstrong@baylibre.com> |
pwm: Add driver for Amlogic Meson PWM controller This adds the driver for the PWM controller found in the Amlogic SoCs. This PWM is only a set of Gates, Dividers and Counters: PWM output is achieved by calculating a clock that permits calculating two periods (low and high). The counter then has to be set to switch after N cycles for the first half period. The hardware has no "polarity" setting. This driver reverses the period cycles (the low length is inverted with the high length) for PWM_POLARITY_INVERSED. Disabling the PWM stops the output immediately (without waiting for the current period to complete first). Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
|
#
2d481b2e |
|
01-Oct-2020 |
Neil Armstrong <narmstrong@baylibre.com> |
pwm: Add driver for Amlogic Meson PWM controller This adds the driver for the PWM controller found in the Amlogic SoCs. This PWM is only a set of Gates, Dividers and Counters: PWM output is achieved by calculating a clock that permits calculating two periods (low and high). The counter then has to be set to switch after N cycles for the first half period. The hardware has no "polarity" setting. This driver reverses the period cycles (the low length is inverted with the high length) for PWM_POLARITY_INVERSED. Disabling the PWM stops the output immediately (without waiting for the current period to complete first). Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
|
#
2d481b2e |
|
01-Oct-2020 |
Neil Armstrong <narmstrong@baylibre.com> |
pwm: Add driver for Amlogic Meson PWM controller This adds the driver for the PWM controller found in the Amlogic SoCs. This PWM is only a set of Gates, Dividers and Counters: PWM output is achieved by calculating a clock that permits calculating two periods (low and high). The counter then has to be set to switch after N cycles for the first half period. The hardware has no "polarity" setting. This driver reverses the period cycles (the low length is inverted with the high length) for PWM_POLARITY_INVERSED. Disabling the PWM stops the output immediately (without waiting for the current period to complete first). Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
|
#
2d481b2e |
|
01-Oct-2020 |
Neil Armstrong <narmstrong@baylibre.com> |
pwm: Add driver for Amlogic Meson PWM controller This adds the driver for the PWM controller found in the Amlogic SoCs. This PWM is only a set of Gates, Dividers and Counters: PWM output is achieved by calculating a clock that permits calculating two periods (low and high). The counter then has to be set to switch after N cycles for the first half period. The hardware has no "polarity" setting. This driver reverses the period cycles (the low length is inverted with the high length) for PWM_POLARITY_INVERSED. Disabling the PWM stops the output immediately (without waiting for the current period to complete first). Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
|
#
2d481b2e |
|
01-Oct-2020 |
Neil Armstrong <narmstrong@baylibre.com> |
pwm: Add driver for Amlogic Meson PWM controller This adds the driver for the PWM controller found in the Amlogic SoCs. This PWM is only a set of Gates, Dividers and Counters: PWM output is achieved by calculating a clock that permits calculating two periods (low and high). The counter then has to be set to switch after N cycles for the first half period. The hardware has no "polarity" setting. This driver reverses the period cycles (the low length is inverted with the high length) for PWM_POLARITY_INVERSED. Disabling the PWM stops the output immediately (without waiting for the current period to complete first). Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
|
#
2d481b2e |
|
01-Oct-2020 |
Neil Armstrong <narmstrong@baylibre.com> |
pwm: Add driver for Amlogic Meson PWM controller This adds the driver for the PWM controller found in the Amlogic SoCs. This PWM is only a set of Gates, Dividers and Counters: PWM output is achieved by calculating a clock that permits calculating two periods (low and high). The counter then has to be set to switch after N cycles for the first half period. The hardware has no "polarity" setting. This driver reverses the period cycles (the low length is inverted with the high length) for PWM_POLARITY_INVERSED. Disabling the PWM stops the output immediately (without waiting for the current period to complete first). Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
|
#
2d481b2e |
|
01-Oct-2020 |
Neil Armstrong <narmstrong@baylibre.com> |
pwm: Add driver for Amlogic Meson PWM controller This adds the driver for the PWM controller found in the Amlogic SoCs. This PWM is only a set of Gates, Dividers and Counters: PWM output is achieved by calculating a clock that permits calculating two periods (low and high). The counter then has to be set to switch after N cycles for the first half period. The hardware has no "polarity" setting. This driver reverses the period cycles (the low length is inverted with the high length) for PWM_POLARITY_INVERSED. Disabling the PWM stops the output immediately (without waiting for the current period to complete first). Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
|
#
2d481b2e |
|
01-Oct-2020 |
Neil Armstrong <narmstrong@baylibre.com> |
pwm: Add driver for Amlogic Meson PWM controller This adds the driver for the PWM controller found in the Amlogic SoCs. This PWM is only a set of Gates, Dividers and Counters: PWM output is achieved by calculating a clock that permits calculating two periods (low and high). The counter then has to be set to switch after N cycles for the first half period. The hardware has no "polarity" setting. This driver reverses the period cycles (the low length is inverted with the high length) for PWM_POLARITY_INVERSED. Disabling the PWM stops the output immediately (without waiting for the current period to complete first). Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
|
#
2d481b2e |
|
01-Oct-2020 |
Neil Armstrong <narmstrong@baylibre.com> |
pwm: Add driver for Amlogic Meson PWM controller This adds the driver for the PWM controller found in the Amlogic SoCs. This PWM is only a set of Gates, Dividers and Counters: PWM output is achieved by calculating a clock that permits calculating two periods (low and high). The counter then has to be set to switch after N cycles for the first half period. The hardware has no "polarity" setting. This driver reverses the period cycles (the low length is inverted with the high length) for PWM_POLARITY_INVERSED. Disabling the PWM stops the output immediately (without waiting for the current period to complete first). Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
|
#
2d481b2e |
|
01-Oct-2020 |
Neil Armstrong <narmstrong@baylibre.com> |
pwm: Add driver for Amlogic Meson PWM controller This adds the driver for the PWM controller found in the Amlogic SoCs. This PWM is only a set of Gates, Dividers and Counters: PWM output is achieved by calculating a clock that permits calculating two periods (low and high). The counter then has to be set to switch after N cycles for the first half period. The hardware has no "polarity" setting. This driver reverses the period cycles (the low length is inverted with the high length) for PWM_POLARITY_INVERSED. Disabling the PWM stops the output immediately (without waiting for the current period to complete first). Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
|
#
2d481b2e |
|
01-Oct-2020 |
Neil Armstrong <narmstrong@baylibre.com> |
pwm: Add driver for Amlogic Meson PWM controller This adds the driver for the PWM controller found in the Amlogic SoCs. This PWM is only a set of Gates, Dividers and Counters: PWM output is achieved by calculating a clock that permits calculating two periods (low and high). The counter then has to be set to switch after N cycles for the first half period. The hardware has no "polarity" setting. This driver reverses the period cycles (the low length is inverted with the high length) for PWM_POLARITY_INVERSED. Disabling the PWM stops the output immediately (without waiting for the current period to complete first). Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
|
#
2d481b2e |
|
01-Oct-2020 |
Neil Armstrong <narmstrong@baylibre.com> |
pwm: Add driver for Amlogic Meson PWM controller This adds the driver for the PWM controller found in the Amlogic SoCs. This PWM is only a set of Gates, Dividers and Counters: PWM output is achieved by calculating a clock that permits calculating two periods (low and high). The counter then has to be set to switch after N cycles for the first half period. The hardware has no "polarity" setting. This driver reverses the period cycles (the low length is inverted with the high length) for PWM_POLARITY_INVERSED. Disabling the PWM stops the output immediately (without waiting for the current period to complete first). Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
|
#
2d481b2e |
|
01-Oct-2020 |
Neil Armstrong <narmstrong@baylibre.com> |
pwm: Add driver for Amlogic Meson PWM controller This adds the driver for the PWM controller found in the Amlogic SoCs. This PWM is only a set of Gates, Dividers and Counters: PWM output is achieved by calculating a clock that permits calculating two periods (low and high). The counter then has to be set to switch after N cycles for the first half period. The hardware has no "polarity" setting. This driver reverses the period cycles (the low length is inverted with the high length) for PWM_POLARITY_INVERSED. Disabling the PWM stops the output immediately (without waiting for the current period to complete first). Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
|
#
2d481b2e |
|
01-Oct-2020 |
Neil Armstrong <narmstrong@baylibre.com> |
pwm: Add driver for Amlogic Meson PWM controller This adds the driver for the PWM controller found in the Amlogic SoCs. This PWM is only a set of Gates, Dividers and Counters: PWM output is achieved by calculating a clock that permits calculating two periods (low and high). The counter then has to be set to switch after N cycles for the first half period. The hardware has no "polarity" setting. This driver reverses the period cycles (the low length is inverted with the high length) for PWM_POLARITY_INVERSED. Disabling the PWM stops the output immediately (without waiting for the current period to complete first). Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
|
#
2d481b2e |
|
01-Oct-2020 |
Neil Armstrong <narmstrong@baylibre.com> |
pwm: Add driver for Amlogic Meson PWM controller This adds the driver for the PWM controller found in the Amlogic SoCs. This PWM is only a set of Gates, Dividers and Counters: PWM output is achieved by calculating a clock that permits calculating two periods (low and high). The counter then has to be set to switch after N cycles for the first half period. The hardware has no "polarity" setting. This driver reverses the period cycles (the low length is inverted with the high length) for PWM_POLARITY_INVERSED. Disabling the PWM stops the output immediately (without waiting for the current period to complete first). Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
|
#
2d481b2e |
|
01-Oct-2020 |
Neil Armstrong <narmstrong@baylibre.com> |
pwm: Add driver for Amlogic Meson PWM controller This adds the driver for the PWM controller found in the Amlogic SoCs. This PWM is only a set of Gates, Dividers and Counters: PWM output is achieved by calculating a clock that permits calculating two periods (low and high). The counter then has to be set to switch after N cycles for the first half period. The hardware has no "polarity" setting. This driver reverses the period cycles (the low length is inverted with the high length) for PWM_POLARITY_INVERSED. Disabling the PWM stops the output immediately (without waiting for the current period to complete first). Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
|
#
2d481b2e |
|
01-Oct-2020 |
Neil Armstrong <narmstrong@baylibre.com> |
pwm: Add driver for Amlogic Meson PWM controller This adds the driver for the PWM controller found in the Amlogic SoCs. This PWM is only a set of Gates, Dividers and Counters: PWM output is achieved by calculating a clock that permits calculating two periods (low and high). The counter then has to be set to switch after N cycles for the first half period. The hardware has no "polarity" setting. This driver reverses the period cycles (the low length is inverted with the high length) for PWM_POLARITY_INVERSED. Disabling the PWM stops the output immediately (without waiting for the current period to complete first). Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
|
#
2d481b2e |
|
01-Oct-2020 |
Neil Armstrong <narmstrong@baylibre.com> |
pwm: Add driver for Amlogic Meson PWM controller This adds the driver for the PWM controller found in the Amlogic SoCs. This PWM is only a set of Gates, Dividers and Counters: PWM output is achieved by calculating a clock that permits calculating two periods (low and high). The counter then has to be set to switch after N cycles for the first half period. The hardware has no "polarity" setting. This driver reverses the period cycles (the low length is inverted with the high length) for PWM_POLARITY_INVERSED. Disabling the PWM stops the output immediately (without waiting for the current period to complete first). Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
|
#
2d481b2e |
|
01-Oct-2020 |
Neil Armstrong <narmstrong@baylibre.com> |
pwm: Add driver for Amlogic Meson PWM controller This adds the driver for the PWM controller found in the Amlogic SoCs. This PWM is only a set of Gates, Dividers and Counters: PWM output is achieved by calculating a clock that permits calculating two periods (low and high). The counter then has to be set to switch after N cycles for the first half period. The hardware has no "polarity" setting. This driver reverses the period cycles (the low length is inverted with the high length) for PWM_POLARITY_INVERSED. Disabling the PWM stops the output immediately (without waiting for the current period to complete first). Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
|
#
2d481b2e |
|
01-Oct-2020 |
Neil Armstrong <narmstrong@baylibre.com> |
pwm: Add driver for Amlogic Meson PWM controller This adds the driver for the PWM controller found in the Amlogic SoCs. This PWM is only a set of Gates, Dividers and Counters: PWM output is achieved by calculating a clock that permits calculating two periods (low and high). The counter then has to be set to switch after N cycles for the first half period. The hardware has no "polarity" setting. This driver reverses the period cycles (the low length is inverted with the high length) for PWM_POLARITY_INVERSED. Disabling the PWM stops the output immediately (without waiting for the current period to complete first). Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
|
#
2d481b2e |
|
01-Oct-2020 |
Neil Armstrong <narmstrong@baylibre.com> |
pwm: Add driver for Amlogic Meson PWM controller This adds the driver for the PWM controller found in the Amlogic SoCs. This PWM is only a set of Gates, Dividers and Counters: PWM output is achieved by calculating a clock that permits calculating two periods (low and high). The counter then has to be set to switch after N cycles for the first half period. The hardware has no "polarity" setting. This driver reverses the period cycles (the low length is inverted with the high length) for PWM_POLARITY_INVERSED. Disabling the PWM stops the output immediately (without waiting for the current period to complete first). Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
|
#
2d481b2e |
|
01-Oct-2020 |
Neil Armstrong <narmstrong@baylibre.com> |
pwm: Add driver for Amlogic Meson PWM controller This adds the driver for the PWM controller found in the Amlogic SoCs. This PWM is only a set of Gates, Dividers and Counters: PWM output is achieved by calculating a clock that permits calculating two periods (low and high). The counter then has to be set to switch after N cycles for the first half period. The hardware has no "polarity" setting. This driver reverses the period cycles (the low length is inverted with the high length) for PWM_POLARITY_INVERSED. Disabling the PWM stops the output immediately (without waiting for the current period to complete first). Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
|
#
2d481b2e |
|
01-Oct-2020 |
Neil Armstrong <narmstrong@baylibre.com> |
pwm: Add driver for Amlogic Meson PWM controller This adds the driver for the PWM controller found in the Amlogic SoCs. This PWM is only a set of Gates, Dividers and Counters: PWM output is achieved by calculating a clock that permits calculating two periods (low and high). The counter then has to be set to switch after N cycles for the first half period. The hardware has no "polarity" setting. This driver reverses the period cycles (the low length is inverted with the high length) for PWM_POLARITY_INVERSED. Disabling the PWM stops the output immediately (without waiting for the current period to complete first). Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
|
#
2d481b2e |
|
01-Oct-2020 |
Neil Armstrong <narmstrong@baylibre.com> |
pwm: Add driver for Amlogic Meson PWM controller This adds the driver for the PWM controller found in the Amlogic SoCs. This PWM is only a set of Gates, Dividers and Counters: PWM output is achieved by calculating a clock that permits calculating two periods (low and high). The counter then has to be set to switch after N cycles for the first half period. The hardware has no "polarity" setting. This driver reverses the period cycles (the low length is inverted with the high length) for PWM_POLARITY_INVERSED. Disabling the PWM stops the output immediately (without waiting for the current period to complete first). Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
|
#
2d481b2e |
|
01-Oct-2020 |
Neil Armstrong <narmstrong@baylibre.com> |
pwm: Add driver for Amlogic Meson PWM controller This adds the driver for the PWM controller found in the Amlogic SoCs. This PWM is only a set of Gates, Dividers and Counters: PWM output is achieved by calculating a clock that permits calculating two periods (low and high). The counter then has to be set to switch after N cycles for the first half period. The hardware has no "polarity" setting. This driver reverses the period cycles (the low length is inverted with the high length) for PWM_POLARITY_INVERSED. Disabling the PWM stops the output immediately (without waiting for the current period to complete first). Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
|
#
2d481b2e |
|
01-Oct-2020 |
Neil Armstrong <narmstrong@baylibre.com> |
pwm: Add driver for Amlogic Meson PWM controller This adds the driver for the PWM controller found in the Amlogic SoCs. This PWM is only a set of Gates, Dividers and Counters: PWM output is achieved by calculating a clock that permits calculating two periods (low and high). The counter then has to be set to switch after N cycles for the first half period. The hardware has no "polarity" setting. This driver reverses the period cycles (the low length is inverted with the high length) for PWM_POLARITY_INVERSED. Disabling the PWM stops the output immediately (without waiting for the current period to complete first). Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
|