#
d678a59d |
|
18-May-2024 |
Tom Rini <trini@konsulko.com> |
Revert "Merge patch series "arm: dts: am62-beagleplay: Fix Beagleplay Ethernet"" When bringing in the series 'arm: dts: am62-beagleplay: Fix Beagleplay Ethernet"' I failed to notice that b4 noticed it was based on next and so took that as the base commit and merged that part of next to master. This reverts commit c8ffd1356d42223cbb8c86280a083cc3c93e6426, reversing changes made to 2ee6f3a5f7550de3599faef9704e166e5dcace35. Reported-by: Jonas Karlman <jonas@kwiboo.se> Signed-off-by: Tom Rini <trini@konsulko.com> |
#
8719a3f5 |
|
01-May-2024 |
Tom Rini <trini@konsulko.com> |
power: Remove <common.h> and add needed includes Remove <common.h> from this driver directory and when needed add missing include files directly. Signed-off-by: Tom Rini <trini@konsulko.com> |
#
1e94b46f |
|
14-Sep-2023 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/printk.h from common header This old patch was marked as deferred. Bring it back to life, to continue towards the removal of common.h Move this out of the common header and include it only where needed. Signed-off-by: Simon Glass <sjg@chromium.org> |
#
29fca9f2 |
|
19-Apr-2023 |
Eugen Hristev <eugen.hristev@collabora.com> |
regulator: rename dev_pdata to plat Simplify the subsystem by renaming `dev_pdata` to just `plat`. No functional change, just trivial renaming. Suggested-by: Simon Glass <sjg@chromium.org> Signed-off-by: Eugen Hristev <eugen.hristev@collabora.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com> |
#
99699a77 |
|
01-Aug-2022 |
Michal Simek <michal.simek@amd.com> |
power: regulator: Remove i2c header from gpio regulator i2c is not used that's why header is not needed. Signed-off-by: Michal Simek <michal.simek@amd.com> |
#
8a8d24bd |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename ..._platdata variables to just ..._plat Try to maintain some consistency between these variables by using _plat as a suffix for them. Signed-off-by: Simon Glass <sjg@chromium.org> |
#
d1998a9f |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename ofdata_to_platdata() to of_to_plat() This name is far too long. Rename it to remove the 'data' bits. This makes it consistent with the platdata->plat rename. Signed-off-by: Simon Glass <sjg@chromium.org> |
#
c69cda25 |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename dev_get_platdata() to dev_get_plat() Rename this to be consistent with the change from 'platdata'. Signed-off-by: Simon Glass <sjg@chromium.org> |
#
caa4daa2 |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename 'platdata' variables to just 'plat' We use 'priv' for private data but often use 'platdata' for platform data. We can't really use 'pdata' since that is ambiguous (it could mean private or platform data). Rename some of the latter variables to end with 'plat' for consistency. Signed-off-by: Simon Glass <sjg@chromium.org> |
#
41575d8e |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename auto_alloc_size members to be shorter This construct is quite long-winded. In earlier days it made some sense since auto-allocation was a strange concept. But with driver model now used pretty universally, we can shorten this to 'auto'. This reduces verbosity and makes it easier to read. Coincidentally it also ensures that every declaration is on one line, thus making dtoc's job easier. Signed-off-by: Simon Glass <sjg@chromium.org> |
#
cd93d625 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/bitops.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org> |
#
f7ae49fc |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop log.h from common header Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org> |
#
e82692ab |
|
17-Nov-2019 |
Vasily Khoruzhick <anarsoul@gmail.com> |
power: fan53555: fix fan53555_regulator_set_value fan53555_regulator_set_value() passes its own dev to pmic_clrsetbits() instead of its parent (pmic). As result u-boot crashes when you try to set voltage on fan53555 regulator Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com> |
#
5ef1e02e |
|
16-Nov-2019 |
Vasily Khoruzhick <anarsoul@gmail.com> |
power: fan53555: add support for Silergy SYR82X and SYR83X SYR82X and SYR83X are almost identical to FAN53555, the only difference is different die ID and revision, voltage ranges and steps. Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com> Tested-by: Anand Moon <linux.amoon@gmail.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com> |
#
dfb0a70a |
|
30-Nov-2018 |
Philipp Tomsich <philipp.tomsich@theobroma-systems.com> |
power: add FAN53555 family support This adds a driver for the FAN53555 family of regulators and wraps it in a PMIC implementation. While these devices support a 'normal' and 'suspend' mode (controlled via an external pin) to switch between two programmable voltages, this incarnation of the driver assumes that the device is always operating in 'normal' mode. Only setting/reading the programmed voltage is supported at this time and the following device functionality remains unsupported: - switching the selected voltage (via a GPIO) - disabling the voltage output via software-control This matches the functionality of the Linux driver. Tested on a RK3399-Q7 (with 'option 5' devices): setting voltages from the U-Boot shell and verifying output voltages on the board. Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Tested-by: Klaus Goger <klaus.goger@theobroma-systems.com> |
#
8719a3f5 |
|
01-May-2024 |
Tom Rini <trini@konsulko.com> |
power: Remove <common.h> and add needed includes Remove <common.h> from this driver directory and when needed add missing include files directly. Signed-off-by: Tom Rini <trini@konsulko.com> |
#
1e94b46f |
|
14-Sep-2023 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/printk.h from common header This old patch was marked as deferred. Bring it back to life, to continue towards the removal of common.h Move this out of the common header and include it only where needed. Signed-off-by: Simon Glass <sjg@chromium.org> |
#
29fca9f2 |
|
19-Apr-2023 |
Eugen Hristev <eugen.hristev@collabora.com> |
regulator: rename dev_pdata to plat Simplify the subsystem by renaming `dev_pdata` to just `plat`. No functional change, just trivial renaming. Suggested-by: Simon Glass <sjg@chromium.org> Signed-off-by: Eugen Hristev <eugen.hristev@collabora.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com> |
#
99699a77 |
|
01-Aug-2022 |
Michal Simek <michal.simek@amd.com> |
power: regulator: Remove i2c header from gpio regulator i2c is not used that's why header is not needed. Signed-off-by: Michal Simek <michal.simek@amd.com> |
#
8a8d24bd |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename ..._platdata variables to just ..._plat Try to maintain some consistency between these variables by using _plat as a suffix for them. Signed-off-by: Simon Glass <sjg@chromium.org> |
#
d1998a9f |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename ofdata_to_platdata() to of_to_plat() This name is far too long. Rename it to remove the 'data' bits. This makes it consistent with the platdata->plat rename. Signed-off-by: Simon Glass <sjg@chromium.org> |
#
c69cda25 |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename dev_get_platdata() to dev_get_plat() Rename this to be consistent with the change from 'platdata'. Signed-off-by: Simon Glass <sjg@chromium.org> |
#
caa4daa2 |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename 'platdata' variables to just 'plat' We use 'priv' for private data but often use 'platdata' for platform data. We can't really use 'pdata' since that is ambiguous (it could mean private or platform data). Rename some of the latter variables to end with 'plat' for consistency. Signed-off-by: Simon Glass <sjg@chromium.org> |
#
41575d8e |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename auto_alloc_size members to be shorter This construct is quite long-winded. In earlier days it made some sense since auto-allocation was a strange concept. But with driver model now used pretty universally, we can shorten this to 'auto'. This reduces verbosity and makes it easier to read. Coincidentally it also ensures that every declaration is on one line, thus making dtoc's job easier. Signed-off-by: Simon Glass <sjg@chromium.org> |
#
cd93d625 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/bitops.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org> |
#
f7ae49fc |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop log.h from common header Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org> |
#
e82692ab |
|
17-Nov-2019 |
Vasily Khoruzhick <anarsoul@gmail.com> |
power: fan53555: fix fan53555_regulator_set_value fan53555_regulator_set_value() passes its own dev to pmic_clrsetbits() instead of its parent (pmic). As result u-boot crashes when you try to set voltage on fan53555 regulator Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com> |
#
5ef1e02e |
|
16-Nov-2019 |
Vasily Khoruzhick <anarsoul@gmail.com> |
power: fan53555: add support for Silergy SYR82X and SYR83X SYR82X and SYR83X are almost identical to FAN53555, the only difference is different die ID and revision, voltage ranges and steps. Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com> Tested-by: Anand Moon <linux.amoon@gmail.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com> |
#
dfb0a70a |
|
30-Nov-2018 |
Philipp Tomsich <philipp.tomsich@theobroma-systems.com> |
power: add FAN53555 family support This adds a driver for the FAN53555 family of regulators and wraps it in a PMIC implementation. While these devices support a 'normal' and 'suspend' mode (controlled via an external pin) to switch between two programmable voltages, this incarnation of the driver assumes that the device is always operating in 'normal' mode. Only setting/reading the programmed voltage is supported at this time and the following device functionality remains unsupported: - switching the selected voltage (via a GPIO) - disabling the voltage output via software-control This matches the functionality of the Linux driver. Tested on a RK3399-Q7 (with 'option 5' devices): setting voltages from the U-Boot shell and verifying output voltages on the board. Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Tested-by: Klaus Goger <klaus.goger@theobroma-systems.com> |
#
1e94b46f |
|
14-Sep-2023 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/printk.h from common header This old patch was marked as deferred. Bring it back to life, to continue towards the removal of common.h Move this out of the common header and include it only where needed. Signed-off-by: Simon Glass <sjg@chromium.org> |
#
29fca9f2 |
|
19-Apr-2023 |
Eugen Hristev <eugen.hristev@collabora.com> |
regulator: rename dev_pdata to plat Simplify the subsystem by renaming `dev_pdata` to just `plat`. No functional change, just trivial renaming. Suggested-by: Simon Glass <sjg@chromium.org> Signed-off-by: Eugen Hristev <eugen.hristev@collabora.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com> |
#
99699a77 |
|
01-Aug-2022 |
Michal Simek <michal.simek@amd.com> |
power: regulator: Remove i2c header from gpio regulator i2c is not used that's why header is not needed. Signed-off-by: Michal Simek <michal.simek@amd.com> |
#
8a8d24bd |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename ..._platdata variables to just ..._plat Try to maintain some consistency between these variables by using _plat as a suffix for them. Signed-off-by: Simon Glass <sjg@chromium.org> |
#
d1998a9f |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename ofdata_to_platdata() to of_to_plat() This name is far too long. Rename it to remove the 'data' bits. This makes it consistent with the platdata->plat rename. Signed-off-by: Simon Glass <sjg@chromium.org> |
#
c69cda25 |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename dev_get_platdata() to dev_get_plat() Rename this to be consistent with the change from 'platdata'. Signed-off-by: Simon Glass <sjg@chromium.org> |
#
caa4daa2 |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename 'platdata' variables to just 'plat' We use 'priv' for private data but often use 'platdata' for platform data. We can't really use 'pdata' since that is ambiguous (it could mean private or platform data). Rename some of the latter variables to end with 'plat' for consistency. Signed-off-by: Simon Glass <sjg@chromium.org> |
#
41575d8e |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename auto_alloc_size members to be shorter This construct is quite long-winded. In earlier days it made some sense since auto-allocation was a strange concept. But with driver model now used pretty universally, we can shorten this to 'auto'. This reduces verbosity and makes it easier to read. Coincidentally it also ensures that every declaration is on one line, thus making dtoc's job easier. Signed-off-by: Simon Glass <sjg@chromium.org> |
#
cd93d625 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/bitops.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org> |
#
f7ae49fc |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop log.h from common header Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org> |
#
e82692ab |
|
17-Nov-2019 |
Vasily Khoruzhick <anarsoul@gmail.com> |
power: fan53555: fix fan53555_regulator_set_value fan53555_regulator_set_value() passes its own dev to pmic_clrsetbits() instead of its parent (pmic). As result u-boot crashes when you try to set voltage on fan53555 regulator Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com> |
#
5ef1e02e |
|
16-Nov-2019 |
Vasily Khoruzhick <anarsoul@gmail.com> |
power: fan53555: add support for Silergy SYR82X and SYR83X SYR82X and SYR83X are almost identical to FAN53555, the only difference is different die ID and revision, voltage ranges and steps. Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com> Tested-by: Anand Moon <linux.amoon@gmail.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com> |
#
dfb0a70a |
|
30-Nov-2018 |
Philipp Tomsich <philipp.tomsich@theobroma-systems.com> |
power: add FAN53555 family support This adds a driver for the FAN53555 family of regulators and wraps it in a PMIC implementation. While these devices support a 'normal' and 'suspend' mode (controlled via an external pin) to switch between two programmable voltages, this incarnation of the driver assumes that the device is always operating in 'normal' mode. Only setting/reading the programmed voltage is supported at this time and the following device functionality remains unsupported: - switching the selected voltage (via a GPIO) - disabling the voltage output via software-control This matches the functionality of the Linux driver. Tested on a RK3399-Q7 (with 'option 5' devices): setting voltages from the U-Boot shell and verifying output voltages on the board. Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Tested-by: Klaus Goger <klaus.goger@theobroma-systems.com> |
#
29fca9f2 |
|
19-Apr-2023 |
Eugen Hristev <eugen.hristev@collabora.com> |
regulator: rename dev_pdata to plat Simplify the subsystem by renaming `dev_pdata` to just `plat`. No functional change, just trivial renaming. Suggested-by: Simon Glass <sjg@chromium.org> Signed-off-by: Eugen Hristev <eugen.hristev@collabora.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com> |
#
99699a77 |
|
01-Aug-2022 |
Michal Simek <michal.simek@amd.com> |
power: regulator: Remove i2c header from gpio regulator i2c is not used that's why header is not needed. Signed-off-by: Michal Simek <michal.simek@amd.com> |
#
8a8d24bd |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename ..._platdata variables to just ..._plat Try to maintain some consistency between these variables by using _plat as a suffix for them. Signed-off-by: Simon Glass <sjg@chromium.org> |
#
d1998a9f |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename ofdata_to_platdata() to of_to_plat() This name is far too long. Rename it to remove the 'data' bits. This makes it consistent with the platdata->plat rename. Signed-off-by: Simon Glass <sjg@chromium.org> |
#
c69cda25 |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename dev_get_platdata() to dev_get_plat() Rename this to be consistent with the change from 'platdata'. Signed-off-by: Simon Glass <sjg@chromium.org> |
#
caa4daa2 |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename 'platdata' variables to just 'plat' We use 'priv' for private data but often use 'platdata' for platform data. We can't really use 'pdata' since that is ambiguous (it could mean private or platform data). Rename some of the latter variables to end with 'plat' for consistency. Signed-off-by: Simon Glass <sjg@chromium.org> |
#
41575d8e |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename auto_alloc_size members to be shorter This construct is quite long-winded. In earlier days it made some sense since auto-allocation was a strange concept. But with driver model now used pretty universally, we can shorten this to 'auto'. This reduces verbosity and makes it easier to read. Coincidentally it also ensures that every declaration is on one line, thus making dtoc's job easier. Signed-off-by: Simon Glass <sjg@chromium.org> |
#
cd93d625 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/bitops.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org> |
#
f7ae49fc |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop log.h from common header Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org> |
#
e82692ab |
|
17-Nov-2019 |
Vasily Khoruzhick <anarsoul@gmail.com> |
power: fan53555: fix fan53555_regulator_set_value fan53555_regulator_set_value() passes its own dev to pmic_clrsetbits() instead of its parent (pmic). As result u-boot crashes when you try to set voltage on fan53555 regulator Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com> |
#
5ef1e02e |
|
16-Nov-2019 |
Vasily Khoruzhick <anarsoul@gmail.com> |
power: fan53555: add support for Silergy SYR82X and SYR83X SYR82X and SYR83X are almost identical to FAN53555, the only difference is different die ID and revision, voltage ranges and steps. Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com> Tested-by: Anand Moon <linux.amoon@gmail.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com> |
#
dfb0a70a |
|
30-Nov-2018 |
Philipp Tomsich <philipp.tomsich@theobroma-systems.com> |
power: add FAN53555 family support This adds a driver for the FAN53555 family of regulators and wraps it in a PMIC implementation. While these devices support a 'normal' and 'suspend' mode (controlled via an external pin) to switch between two programmable voltages, this incarnation of the driver assumes that the device is always operating in 'normal' mode. Only setting/reading the programmed voltage is supported at this time and the following device functionality remains unsupported: - switching the selected voltage (via a GPIO) - disabling the voltage output via software-control This matches the functionality of the Linux driver. Tested on a RK3399-Q7 (with 'option 5' devices): setting voltages from the U-Boot shell and verifying output voltages on the board. Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Tested-by: Klaus Goger <klaus.goger@theobroma-systems.com> |
#
99699a77 |
|
01-Aug-2022 |
Michal Simek <michal.simek@amd.com> |
power: regulator: Remove i2c header from gpio regulator i2c is not used that's why header is not needed. Signed-off-by: Michal Simek <michal.simek@amd.com> |
#
8a8d24bd |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename ..._platdata variables to just ..._plat Try to maintain some consistency between these variables by using _plat as a suffix for them. Signed-off-by: Simon Glass <sjg@chromium.org> |
#
d1998a9f |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename ofdata_to_platdata() to of_to_plat() This name is far too long. Rename it to remove the 'data' bits. This makes it consistent with the platdata->plat rename. Signed-off-by: Simon Glass <sjg@chromium.org> |
#
c69cda25 |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename dev_get_platdata() to dev_get_plat() Rename this to be consistent with the change from 'platdata'. Signed-off-by: Simon Glass <sjg@chromium.org> |
#
caa4daa2 |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename 'platdata' variables to just 'plat' We use 'priv' for private data but often use 'platdata' for platform data. We can't really use 'pdata' since that is ambiguous (it could mean private or platform data). Rename some of the latter variables to end with 'plat' for consistency. Signed-off-by: Simon Glass <sjg@chromium.org> |
#
41575d8e |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename auto_alloc_size members to be shorter This construct is quite long-winded. In earlier days it made some sense since auto-allocation was a strange concept. But with driver model now used pretty universally, we can shorten this to 'auto'. This reduces verbosity and makes it easier to read. Coincidentally it also ensures that every declaration is on one line, thus making dtoc's job easier. Signed-off-by: Simon Glass <sjg@chromium.org> |
#
cd93d625 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/bitops.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org> |
#
f7ae49fc |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop log.h from common header Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org> |
#
e82692ab |
|
17-Nov-2019 |
Vasily Khoruzhick <anarsoul@gmail.com> |
power: fan53555: fix fan53555_regulator_set_value fan53555_regulator_set_value() passes its own dev to pmic_clrsetbits() instead of its parent (pmic). As result u-boot crashes when you try to set voltage on fan53555 regulator Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com> |
#
5ef1e02e |
|
16-Nov-2019 |
Vasily Khoruzhick <anarsoul@gmail.com> |
power: fan53555: add support for Silergy SYR82X and SYR83X SYR82X and SYR83X are almost identical to FAN53555, the only difference is different die ID and revision, voltage ranges and steps. Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com> Tested-by: Anand Moon <linux.amoon@gmail.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com> |
#
dfb0a70a |
|
30-Nov-2018 |
Philipp Tomsich <philipp.tomsich@theobroma-systems.com> |
power: add FAN53555 family support This adds a driver for the FAN53555 family of regulators and wraps it in a PMIC implementation. While these devices support a 'normal' and 'suspend' mode (controlled via an external pin) to switch between two programmable voltages, this incarnation of the driver assumes that the device is always operating in 'normal' mode. Only setting/reading the programmed voltage is supported at this time and the following device functionality remains unsupported: - switching the selected voltage (via a GPIO) - disabling the voltage output via software-control This matches the functionality of the Linux driver. Tested on a RK3399-Q7 (with 'option 5' devices): setting voltages from the U-Boot shell and verifying output voltages on the board. Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Tested-by: Klaus Goger <klaus.goger@theobroma-systems.com> |
#
8a8d24bd |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename ..._platdata variables to just ..._plat Try to maintain some consistency between these variables by using _plat as a suffix for them. Signed-off-by: Simon Glass <sjg@chromium.org> |
#
d1998a9f |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename ofdata_to_platdata() to of_to_plat() This name is far too long. Rename it to remove the 'data' bits. This makes it consistent with the platdata->plat rename. Signed-off-by: Simon Glass <sjg@chromium.org> |
#
c69cda25 |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename dev_get_platdata() to dev_get_plat() Rename this to be consistent with the change from 'platdata'. Signed-off-by: Simon Glass <sjg@chromium.org> |
#
caa4daa2 |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename 'platdata' variables to just 'plat' We use 'priv' for private data but often use 'platdata' for platform data. We can't really use 'pdata' since that is ambiguous (it could mean private or platform data). Rename some of the latter variables to end with 'plat' for consistency. Signed-off-by: Simon Glass <sjg@chromium.org> |
#
41575d8e |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename auto_alloc_size members to be shorter This construct is quite long-winded. In earlier days it made some sense since auto-allocation was a strange concept. But with driver model now used pretty universally, we can shorten this to 'auto'. This reduces verbosity and makes it easier to read. Coincidentally it also ensures that every declaration is on one line, thus making dtoc's job easier. Signed-off-by: Simon Glass <sjg@chromium.org> |
#
cd93d625 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/bitops.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org> |
#
f7ae49fc |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop log.h from common header Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org> |
#
e82692ab |
|
17-Nov-2019 |
Vasily Khoruzhick <anarsoul@gmail.com> |
power: fan53555: fix fan53555_regulator_set_value fan53555_regulator_set_value() passes its own dev to pmic_clrsetbits() instead of its parent (pmic). As result u-boot crashes when you try to set voltage on fan53555 regulator Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com> |
#
5ef1e02e |
|
16-Nov-2019 |
Vasily Khoruzhick <anarsoul@gmail.com> |
power: fan53555: add support for Silergy SYR82X and SYR83X SYR82X and SYR83X are almost identical to FAN53555, the only difference is different die ID and revision, voltage ranges and steps. Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com> Tested-by: Anand Moon <linux.amoon@gmail.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com> |
#
dfb0a70a |
|
30-Nov-2018 |
Philipp Tomsich <philipp.tomsich@theobroma-systems.com> |
power: add FAN53555 family support This adds a driver for the FAN53555 family of regulators and wraps it in a PMIC implementation. While these devices support a 'normal' and 'suspend' mode (controlled via an external pin) to switch between two programmable voltages, this incarnation of the driver assumes that the device is always operating in 'normal' mode. Only setting/reading the programmed voltage is supported at this time and the following device functionality remains unsupported: - switching the selected voltage (via a GPIO) - disabling the voltage output via software-control This matches the functionality of the Linux driver. Tested on a RK3399-Q7 (with 'option 5' devices): setting voltages from the U-Boot shell and verifying output voltages on the board. Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Tested-by: Klaus Goger <klaus.goger@theobroma-systems.com> |
#
cd93d625 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/bitops.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org> |
#
f7ae49fc |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop log.h from common header Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org> |
#
e82692ab |
|
17-Nov-2019 |
Vasily Khoruzhick <anarsoul@gmail.com> |
power: fan53555: fix fan53555_regulator_set_value fan53555_regulator_set_value() passes its own dev to pmic_clrsetbits() instead of its parent (pmic). As result u-boot crashes when you try to set voltage on fan53555 regulator Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com> |
#
5ef1e02e |
|
16-Nov-2019 |
Vasily Khoruzhick <anarsoul@gmail.com> |
power: fan53555: add support for Silergy SYR82X and SYR83X SYR82X and SYR83X are almost identical to FAN53555, the only difference is different die ID and revision, voltage ranges and steps. Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com> Tested-by: Anand Moon <linux.amoon@gmail.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com> |
#
dfb0a70a |
|
30-Nov-2018 |
Philipp Tomsich <philipp.tomsich@theobroma-systems.com> |
power: add FAN53555 family support This adds a driver for the FAN53555 family of regulators and wraps it in a PMIC implementation. While these devices support a 'normal' and 'suspend' mode (controlled via an external pin) to switch between two programmable voltages, this incarnation of the driver assumes that the device is always operating in 'normal' mode. Only setting/reading the programmed voltage is supported at this time and the following device functionality remains unsupported: - switching the selected voltage (via a GPIO) - disabling the voltage output via software-control This matches the functionality of the Linux driver. Tested on a RK3399-Q7 (with 'option 5' devices): setting voltages from the U-Boot shell and verifying output voltages on the board. Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Tested-by: Klaus Goger <klaus.goger@theobroma-systems.com> |
#
e82692ab |
|
17-Nov-2019 |
Vasily Khoruzhick <anarsoul@gmail.com> |
power: fan53555: fix fan53555_regulator_set_value fan53555_regulator_set_value() passes its own dev to pmic_clrsetbits() instead of its parent (pmic). As result u-boot crashes when you try to set voltage on fan53555 regulator Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com> |
#
5ef1e02e |
|
16-Nov-2019 |
Vasily Khoruzhick <anarsoul@gmail.com> |
power: fan53555: add support for Silergy SYR82X and SYR83X SYR82X and SYR83X are almost identical to FAN53555, the only difference is different die ID and revision, voltage ranges and steps. Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com> Tested-by: Anand Moon <linux.amoon@gmail.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com> |
#
dfb0a70a |
|
30-Nov-2018 |
Philipp Tomsich <philipp.tomsich@theobroma-systems.com> |
power: add FAN53555 family support This adds a driver for the FAN53555 family of regulators and wraps it in a PMIC implementation. While these devices support a 'normal' and 'suspend' mode (controlled via an external pin) to switch between two programmable voltages, this incarnation of the driver assumes that the device is always operating in 'normal' mode. Only setting/reading the programmed voltage is supported at this time and the following device functionality remains unsupported: - switching the selected voltage (via a GPIO) - disabling the voltage output via software-control This matches the functionality of the Linux driver. Tested on a RK3399-Q7 (with 'option 5' devices): setting voltages from the U-Boot shell and verifying output voltages on the board. Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Tested-by: Klaus Goger <klaus.goger@theobroma-systems.com> |
#
dfb0a70a |
|
30-Nov-2018 |
Philipp Tomsich <philipp.tomsich@theobroma-systems.com> |
power: add FAN53555 family support This adds a driver for the FAN53555 family of regulators and wraps it in a PMIC implementation. While these devices support a 'normal' and 'suspend' mode (controlled via an external pin) to switch between two programmable voltages, this incarnation of the driver assumes that the device is always operating in 'normal' mode. Only setting/reading the programmed voltage is supported at this time and the following device functionality remains unsupported: - switching the selected voltage (via a GPIO) - disabling the voltage output via software-control This matches the functionality of the Linux driver. Tested on a RK3399-Q7 (with 'option 5' devices): setting voltages from the U-Boot shell and verifying output voltages on the board. Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Tested-by: Klaus Goger <klaus.goger@theobroma-systems.com> |