#
d678a59d |
|
18-May-2024 |
Tom Rini <trini@konsulko.com> |
Revert "Merge patch series "arm: dts: am62-beagleplay: Fix Beagleplay Ethernet"" When bringing in the series 'arm: dts: am62-beagleplay: Fix Beagleplay Ethernet"' I failed to notice that b4 noticed it was based on next and so took that as the base commit and merged that part of next to master. This reverts commit c8ffd1356d42223cbb8c86280a083cc3c93e6426, reversing changes made to 2ee6f3a5f7550de3599faef9704e166e5dcace35. Reported-by: Jonas Karlman <jonas@kwiboo.se> Signed-off-by: Tom Rini <trini@konsulko.com> |
#
0e407c74 |
|
01-May-2024 |
Tom Rini <trini@konsulko.com> |
net: Remove <common.h> and add needed includes Remove <common.h> from this driver directory and when needed add missing include files directly. Signed-off-by: Tom Rini <trini@konsulko.com> |
#
6e7df1d1 |
|
10-Jan-2023 |
Tom Rini <trini@konsulko.com> |
global: Finish CONFIG -> CFG migration At this point, the remaining places where we have a symbol that is defined as CONFIG_... are in fairly odd locations. While as much dead code has been removed as possible, some of these locations are simply less obvious at first. In other cases, this code is used, but was defined in such a way as to have been missed by earlier checks. Perform a rename of all such remaining symbols to be CFG_... rather than CONFIG_... Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org> |
#
ffb0f6f4 |
|
06-Apr-2022 |
Marek Behún <kabel@kernel.org> |
treewide: Rename PHY_INTERFACE_MODE_NONE to PHY_INTERFACE_MODE_NA Rename constant PHY_INTERFACE_MODE_NONE to PHY_INTERFACE_MODE_NA to make it compatible with Linux' naming. Signed-off-by: Marek Behún <marek.behun@nic.cz> Reviewed-by: Stefan Roese <sr@denx.de> Reviewed-by: Ramon Fried <rfried.dev@gmail.com> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> |
#
123ca114 |
|
06-Apr-2022 |
Marek Behún <kabel@kernel.org> |
net: introduce helpers to get PHY interface mode from a device/ofnode Add helpers ofnode_read_phy_mode() and dev_read_phy_mode() to parse the "phy-mode" / "phy-connection-type" property. Add corresponding UT test. Use them treewide. This allows us to inline the phy_get_interface_by_name() into ofnode_read_phy_mode(), since the former is not used anymore. Signed-off-by: Marek Behún <marek.behun@nic.cz> Reviewed-by: Ramon Fried <rfried.dev@gmail.com> Tested-by: Patrice Chotard <patrice.chotard@foss.st.com> |
#
0b1284eb |
|
24-Jul-2021 |
Simon Glass <sjg@chromium.org> |
global: Convert simple_strtoul() with decimal to dectoul() It is a pain to have to specify the value 10 in each call. Add a new dectoul() function and update the code to use it. Signed-off-by: Simon Glass <sjg@chromium.org> |
#
69bd7dfc |
|
05-Oct-2020 |
Rasmus Villemoes <rasmus.villemoes@prevas.dk> |
dm_qe_uec.c: fix indentation in uec_set_mac_if_mode() Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk> Reviewed-by: Heiko Schocher <hs@denx.de> |
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com> |
#
d1998a9f |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename ofdata_to_platdata() to of_to_plat() This name is far too long. Rename it to remove the 'data' bits. This makes it consistent with the platdata->plat rename. Signed-off-by: Simon Glass <sjg@chromium.org> |
#
c69cda25 |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename dev_get_platdata() to dev_get_plat() Rename this to be consistent with the change from 'platdata'. Signed-off-by: Simon Glass <sjg@chromium.org> |
#
caa4daa2 |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename 'platdata' variables to just 'plat' We use 'priv' for private data but often use 'platdata' for platform data. We can't really use 'pdata' since that is ambiguous (it could mean private or platform data). Rename some of the latter variables to end with 'plat' for consistency. Signed-off-by: Simon Glass <sjg@chromium.org> |
#
41575d8e |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename auto_alloc_size members to be shorter This construct is quite long-winded. In earlier days it made some sense since auto-allocation was a strange concept. But with driver model now used pretty universally, we can shorten this to 'auto'. This reduces verbosity and makes it easier to read. Coincidentally it also ensures that every declaration is on one line, thus making dtoc's job easier. Signed-off-by: Simon Glass <sjg@chromium.org> |
#
6e31c62a |
|
06-Feb-2020 |
Heiko Schocher <hs@denx.de> |
net, qe: add DM support for QE UEC ethernet add DM/DTS support for the UEC ethernet on QUICC Engine Block. Signed-off-by: Heiko Schocher <hs@denx.de> Patch-cc: Mario Six <mario.six@gdsys.cc> Patch-cc: Qiang Zhao <qiang.zhao@nxp.com> Patch-cc: Holger Brunck <holger.brunck@hitachi-powergrids.com> Patch-cc: Madalin Bucur <madalin.bucur@oss.nxp.com> Series-changes: 3 - revert: commit "3374264df97b" ("drivers: net: qe: deselect QE when DM_ETH is enabled") as now qe works with DM and DM_ETH support. - fix mailaddress from Holger Series-changes: 2 - add comments from Qiang Zhao: - add device node documentation - I did not drop the dm_qe_uec_phy.c and use drivers/net/fsl_mdio.c because using drivers/net/fsl_mdio.c leads in none existent udevice mdio@3320 instead boards with DM ETH support should use now this driver. - remove RFC tag Commit-notes: - I let the old none DM based implementation in code so boards should work with old implementation. This Code should be removed if all boards are converted to DM/DTS. - add the DM based qe uec driver under drivers/net/qe - Therefore copied the files uccf.c uccf.h uec.h from drivers/qe. So there are a lot of Codingstyle problems currently. I fix them in next version if this RFC patch is OK or it needs some changes. - The dm based driver code is now under drivers/net/qe/dm_qe_uec.c Used a lot of functions from drivers/qe/uec.c - seperated the PHY specific code into seperate file drivers/net/qe/dm_qe_uec_phy.c END |
#
0e407c74 |
|
01-May-2024 |
Tom Rini <trini@konsulko.com> |
net: Remove <common.h> and add needed includes Remove <common.h> from this driver directory and when needed add missing include files directly. Signed-off-by: Tom Rini <trini@konsulko.com> |
#
6e7df1d1 |
|
10-Jan-2023 |
Tom Rini <trini@konsulko.com> |
global: Finish CONFIG -> CFG migration At this point, the remaining places where we have a symbol that is defined as CONFIG_... are in fairly odd locations. While as much dead code has been removed as possible, some of these locations are simply less obvious at first. In other cases, this code is used, but was defined in such a way as to have been missed by earlier checks. Perform a rename of all such remaining symbols to be CFG_... rather than CONFIG_... Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org> |
#
ffb0f6f4 |
|
06-Apr-2022 |
Marek Behún <kabel@kernel.org> |
treewide: Rename PHY_INTERFACE_MODE_NONE to PHY_INTERFACE_MODE_NA Rename constant PHY_INTERFACE_MODE_NONE to PHY_INTERFACE_MODE_NA to make it compatible with Linux' naming. Signed-off-by: Marek Behún <marek.behun@nic.cz> Reviewed-by: Stefan Roese <sr@denx.de> Reviewed-by: Ramon Fried <rfried.dev@gmail.com> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> |
#
123ca114 |
|
06-Apr-2022 |
Marek Behún <kabel@kernel.org> |
net: introduce helpers to get PHY interface mode from a device/ofnode Add helpers ofnode_read_phy_mode() and dev_read_phy_mode() to parse the "phy-mode" / "phy-connection-type" property. Add corresponding UT test. Use them treewide. This allows us to inline the phy_get_interface_by_name() into ofnode_read_phy_mode(), since the former is not used anymore. Signed-off-by: Marek Behún <marek.behun@nic.cz> Reviewed-by: Ramon Fried <rfried.dev@gmail.com> Tested-by: Patrice Chotard <patrice.chotard@foss.st.com> |
#
0b1284eb |
|
24-Jul-2021 |
Simon Glass <sjg@chromium.org> |
global: Convert simple_strtoul() with decimal to dectoul() It is a pain to have to specify the value 10 in each call. Add a new dectoul() function and update the code to use it. Signed-off-by: Simon Glass <sjg@chromium.org> |
#
69bd7dfc |
|
05-Oct-2020 |
Rasmus Villemoes <rasmus.villemoes@prevas.dk> |
dm_qe_uec.c: fix indentation in uec_set_mac_if_mode() Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk> Reviewed-by: Heiko Schocher <hs@denx.de> |
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com> |
#
d1998a9f |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename ofdata_to_platdata() to of_to_plat() This name is far too long. Rename it to remove the 'data' bits. This makes it consistent with the platdata->plat rename. Signed-off-by: Simon Glass <sjg@chromium.org> |
#
c69cda25 |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename dev_get_platdata() to dev_get_plat() Rename this to be consistent with the change from 'platdata'. Signed-off-by: Simon Glass <sjg@chromium.org> |
#
caa4daa2 |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename 'platdata' variables to just 'plat' We use 'priv' for private data but often use 'platdata' for platform data. We can't really use 'pdata' since that is ambiguous (it could mean private or platform data). Rename some of the latter variables to end with 'plat' for consistency. Signed-off-by: Simon Glass <sjg@chromium.org> |
#
41575d8e |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename auto_alloc_size members to be shorter This construct is quite long-winded. In earlier days it made some sense since auto-allocation was a strange concept. But with driver model now used pretty universally, we can shorten this to 'auto'. This reduces verbosity and makes it easier to read. Coincidentally it also ensures that every declaration is on one line, thus making dtoc's job easier. Signed-off-by: Simon Glass <sjg@chromium.org> |
#
6e31c62a |
|
06-Feb-2020 |
Heiko Schocher <hs@denx.de> |
net, qe: add DM support for QE UEC ethernet add DM/DTS support for the UEC ethernet on QUICC Engine Block. Signed-off-by: Heiko Schocher <hs@denx.de> Patch-cc: Mario Six <mario.six@gdsys.cc> Patch-cc: Qiang Zhao <qiang.zhao@nxp.com> Patch-cc: Holger Brunck <holger.brunck@hitachi-powergrids.com> Patch-cc: Madalin Bucur <madalin.bucur@oss.nxp.com> Series-changes: 3 - revert: commit "3374264df97b" ("drivers: net: qe: deselect QE when DM_ETH is enabled") as now qe works with DM and DM_ETH support. - fix mailaddress from Holger Series-changes: 2 - add comments from Qiang Zhao: - add device node documentation - I did not drop the dm_qe_uec_phy.c and use drivers/net/fsl_mdio.c because using drivers/net/fsl_mdio.c leads in none existent udevice mdio@3320 instead boards with DM ETH support should use now this driver. - remove RFC tag Commit-notes: - I let the old none DM based implementation in code so boards should work with old implementation. This Code should be removed if all boards are converted to DM/DTS. - add the DM based qe uec driver under drivers/net/qe - Therefore copied the files uccf.c uccf.h uec.h from drivers/qe. So there are a lot of Codingstyle problems currently. I fix them in next version if this RFC patch is OK or it needs some changes. - The dm based driver code is now under drivers/net/qe/dm_qe_uec.c Used a lot of functions from drivers/qe/uec.c - seperated the PHY specific code into seperate file drivers/net/qe/dm_qe_uec_phy.c END |
#
6e7df1d1 |
|
10-Jan-2023 |
Tom Rini <trini@konsulko.com> |
global: Finish CONFIG -> CFG migration At this point, the remaining places where we have a symbol that is defined as CONFIG_... are in fairly odd locations. While as much dead code has been removed as possible, some of these locations are simply less obvious at first. In other cases, this code is used, but was defined in such a way as to have been missed by earlier checks. Perform a rename of all such remaining symbols to be CFG_... rather than CONFIG_... Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org> |
#
ffb0f6f4 |
|
06-Apr-2022 |
Marek Behún <kabel@kernel.org> |
treewide: Rename PHY_INTERFACE_MODE_NONE to PHY_INTERFACE_MODE_NA Rename constant PHY_INTERFACE_MODE_NONE to PHY_INTERFACE_MODE_NA to make it compatible with Linux' naming. Signed-off-by: Marek Behún <marek.behun@nic.cz> Reviewed-by: Stefan Roese <sr@denx.de> Reviewed-by: Ramon Fried <rfried.dev@gmail.com> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> |
#
123ca114 |
|
06-Apr-2022 |
Marek Behún <kabel@kernel.org> |
net: introduce helpers to get PHY interface mode from a device/ofnode Add helpers ofnode_read_phy_mode() and dev_read_phy_mode() to parse the "phy-mode" / "phy-connection-type" property. Add corresponding UT test. Use them treewide. This allows us to inline the phy_get_interface_by_name() into ofnode_read_phy_mode(), since the former is not used anymore. Signed-off-by: Marek Behún <marek.behun@nic.cz> Reviewed-by: Ramon Fried <rfried.dev@gmail.com> Tested-by: Patrice Chotard <patrice.chotard@foss.st.com> |
#
0b1284eb |
|
24-Jul-2021 |
Simon Glass <sjg@chromium.org> |
global: Convert simple_strtoul() with decimal to dectoul() It is a pain to have to specify the value 10 in each call. Add a new dectoul() function and update the code to use it. Signed-off-by: Simon Glass <sjg@chromium.org> |
#
69bd7dfc |
|
05-Oct-2020 |
Rasmus Villemoes <rasmus.villemoes@prevas.dk> |
dm_qe_uec.c: fix indentation in uec_set_mac_if_mode() Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk> Reviewed-by: Heiko Schocher <hs@denx.de> |
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com> |
#
d1998a9f |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename ofdata_to_platdata() to of_to_plat() This name is far too long. Rename it to remove the 'data' bits. This makes it consistent with the platdata->plat rename. Signed-off-by: Simon Glass <sjg@chromium.org> |
#
c69cda25 |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename dev_get_platdata() to dev_get_plat() Rename this to be consistent with the change from 'platdata'. Signed-off-by: Simon Glass <sjg@chromium.org> |
#
caa4daa2 |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename 'platdata' variables to just 'plat' We use 'priv' for private data but often use 'platdata' for platform data. We can't really use 'pdata' since that is ambiguous (it could mean private or platform data). Rename some of the latter variables to end with 'plat' for consistency. Signed-off-by: Simon Glass <sjg@chromium.org> |
#
41575d8e |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename auto_alloc_size members to be shorter This construct is quite long-winded. In earlier days it made some sense since auto-allocation was a strange concept. But with driver model now used pretty universally, we can shorten this to 'auto'. This reduces verbosity and makes it easier to read. Coincidentally it also ensures that every declaration is on one line, thus making dtoc's job easier. Signed-off-by: Simon Glass <sjg@chromium.org> |
#
6e31c62a |
|
06-Feb-2020 |
Heiko Schocher <hs@denx.de> |
net, qe: add DM support for QE UEC ethernet add DM/DTS support for the UEC ethernet on QUICC Engine Block. Signed-off-by: Heiko Schocher <hs@denx.de> Patch-cc: Mario Six <mario.six@gdsys.cc> Patch-cc: Qiang Zhao <qiang.zhao@nxp.com> Patch-cc: Holger Brunck <holger.brunck@hitachi-powergrids.com> Patch-cc: Madalin Bucur <madalin.bucur@oss.nxp.com> Series-changes: 3 - revert: commit "3374264df97b" ("drivers: net: qe: deselect QE when DM_ETH is enabled") as now qe works with DM and DM_ETH support. - fix mailaddress from Holger Series-changes: 2 - add comments from Qiang Zhao: - add device node documentation - I did not drop the dm_qe_uec_phy.c and use drivers/net/fsl_mdio.c because using drivers/net/fsl_mdio.c leads in none existent udevice mdio@3320 instead boards with DM ETH support should use now this driver. - remove RFC tag Commit-notes: - I let the old none DM based implementation in code so boards should work with old implementation. This Code should be removed if all boards are converted to DM/DTS. - add the DM based qe uec driver under drivers/net/qe - Therefore copied the files uccf.c uccf.h uec.h from drivers/qe. So there are a lot of Codingstyle problems currently. I fix them in next version if this RFC patch is OK or it needs some changes. - The dm based driver code is now under drivers/net/qe/dm_qe_uec.c Used a lot of functions from drivers/qe/uec.c - seperated the PHY specific code into seperate file drivers/net/qe/dm_qe_uec_phy.c END |
#
ffb0f6f4 |
|
06-Apr-2022 |
Marek Behún <marek.behun@nic.cz> |
treewide: Rename PHY_INTERFACE_MODE_NONE to PHY_INTERFACE_MODE_NA Rename constant PHY_INTERFACE_MODE_NONE to PHY_INTERFACE_MODE_NA to make it compatible with Linux' naming. Signed-off-by: Marek Behún <marek.behun@nic.cz> Reviewed-by: Stefan Roese <sr@denx.de> Reviewed-by: Ramon Fried <rfried.dev@gmail.com> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> |
#
123ca114 |
|
06-Apr-2022 |
Marek Behún <marek.behun@nic.cz> |
net: introduce helpers to get PHY interface mode from a device/ofnode Add helpers ofnode_read_phy_mode() and dev_read_phy_mode() to parse the "phy-mode" / "phy-connection-type" property. Add corresponding UT test. Use them treewide. This allows us to inline the phy_get_interface_by_name() into ofnode_read_phy_mode(), since the former is not used anymore. Signed-off-by: Marek Behún <marek.behun@nic.cz> Reviewed-by: Ramon Fried <rfried.dev@gmail.com> Tested-by: Patrice Chotard <patrice.chotard@foss.st.com> |
#
0b1284eb |
|
24-Jul-2021 |
Simon Glass <sjg@chromium.org> |
global: Convert simple_strtoul() with decimal to dectoul() It is a pain to have to specify the value 10 in each call. Add a new dectoul() function and update the code to use it. Signed-off-by: Simon Glass <sjg@chromium.org> |
#
69bd7dfc |
|
05-Oct-2020 |
Rasmus Villemoes <rasmus.villemoes@prevas.dk> |
dm_qe_uec.c: fix indentation in uec_set_mac_if_mode() Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk> Reviewed-by: Heiko Schocher <hs@denx.de> |
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com> |
#
d1998a9f |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename ofdata_to_platdata() to of_to_plat() This name is far too long. Rename it to remove the 'data' bits. This makes it consistent with the platdata->plat rename. Signed-off-by: Simon Glass <sjg@chromium.org> |
#
c69cda25 |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename dev_get_platdata() to dev_get_plat() Rename this to be consistent with the change from 'platdata'. Signed-off-by: Simon Glass <sjg@chromium.org> |
#
caa4daa2 |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename 'platdata' variables to just 'plat' We use 'priv' for private data but often use 'platdata' for platform data. We can't really use 'pdata' since that is ambiguous (it could mean private or platform data). Rename some of the latter variables to end with 'plat' for consistency. Signed-off-by: Simon Glass <sjg@chromium.org> |
#
41575d8e |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename auto_alloc_size members to be shorter This construct is quite long-winded. In earlier days it made some sense since auto-allocation was a strange concept. But with driver model now used pretty universally, we can shorten this to 'auto'. This reduces verbosity and makes it easier to read. Coincidentally it also ensures that every declaration is on one line, thus making dtoc's job easier. Signed-off-by: Simon Glass <sjg@chromium.org> |
#
6e31c62a |
|
06-Feb-2020 |
Heiko Schocher <hs@denx.de> |
net, qe: add DM support for QE UEC ethernet add DM/DTS support for the UEC ethernet on QUICC Engine Block. Signed-off-by: Heiko Schocher <hs@denx.de> Patch-cc: Mario Six <mario.six@gdsys.cc> Patch-cc: Qiang Zhao <qiang.zhao@nxp.com> Patch-cc: Holger Brunck <holger.brunck@hitachi-powergrids.com> Patch-cc: Madalin Bucur <madalin.bucur@oss.nxp.com> Series-changes: 3 - revert: commit "3374264df97b" ("drivers: net: qe: deselect QE when DM_ETH is enabled") as now qe works with DM and DM_ETH support. - fix mailaddress from Holger Series-changes: 2 - add comments from Qiang Zhao: - add device node documentation - I did not drop the dm_qe_uec_phy.c and use drivers/net/fsl_mdio.c because using drivers/net/fsl_mdio.c leads in none existent udevice mdio@3320 instead boards with DM ETH support should use now this driver. - remove RFC tag Commit-notes: - I let the old none DM based implementation in code so boards should work with old implementation. This Code should be removed if all boards are converted to DM/DTS. - add the DM based qe uec driver under drivers/net/qe - Therefore copied the files uccf.c uccf.h uec.h from drivers/qe. So there are a lot of Codingstyle problems currently. I fix them in next version if this RFC patch is OK or it needs some changes. - The dm based driver code is now under drivers/net/qe/dm_qe_uec.c Used a lot of functions from drivers/qe/uec.c - seperated the PHY specific code into seperate file drivers/net/qe/dm_qe_uec_phy.c END |
#
0b1284eb |
|
24-Jul-2021 |
Simon Glass <sjg@chromium.org> |
global: Convert simple_strtoul() with decimal to dectoul() It is a pain to have to specify the value 10 in each call. Add a new dectoul() function and update the code to use it. Signed-off-by: Simon Glass <sjg@chromium.org> |
#
69bd7dfc |
|
05-Oct-2020 |
Rasmus Villemoes <rasmus.villemoes@prevas.dk> |
dm_qe_uec.c: fix indentation in uec_set_mac_if_mode() Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk> Reviewed-by: Heiko Schocher <hs@denx.de> |
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com> |
#
d1998a9f |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename ofdata_to_platdata() to of_to_plat() This name is far too long. Rename it to remove the 'data' bits. This makes it consistent with the platdata->plat rename. Signed-off-by: Simon Glass <sjg@chromium.org> |
#
c69cda25 |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename dev_get_platdata() to dev_get_plat() Rename this to be consistent with the change from 'platdata'. Signed-off-by: Simon Glass <sjg@chromium.org> |
#
caa4daa2 |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename 'platdata' variables to just 'plat' We use 'priv' for private data but often use 'platdata' for platform data. We can't really use 'pdata' since that is ambiguous (it could mean private or platform data). Rename some of the latter variables to end with 'plat' for consistency. Signed-off-by: Simon Glass <sjg@chromium.org> |
#
41575d8e |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename auto_alloc_size members to be shorter This construct is quite long-winded. In earlier days it made some sense since auto-allocation was a strange concept. But with driver model now used pretty universally, we can shorten this to 'auto'. This reduces verbosity and makes it easier to read. Coincidentally it also ensures that every declaration is on one line, thus making dtoc's job easier. Signed-off-by: Simon Glass <sjg@chromium.org> |
#
6e31c62a |
|
06-Feb-2020 |
Heiko Schocher <hs@denx.de> |
net, qe: add DM support for QE UEC ethernet add DM/DTS support for the UEC ethernet on QUICC Engine Block. Signed-off-by: Heiko Schocher <hs@denx.de> Patch-cc: Mario Six <mario.six@gdsys.cc> Patch-cc: Qiang Zhao <qiang.zhao@nxp.com> Patch-cc: Holger Brunck <holger.brunck@hitachi-powergrids.com> Patch-cc: Madalin Bucur <madalin.bucur@oss.nxp.com> Series-changes: 3 - revert: commit "3374264df97b" ("drivers: net: qe: deselect QE when DM_ETH is enabled") as now qe works with DM and DM_ETH support. - fix mailaddress from Holger Series-changes: 2 - add comments from Qiang Zhao: - add device node documentation - I did not drop the dm_qe_uec_phy.c and use drivers/net/fsl_mdio.c because using drivers/net/fsl_mdio.c leads in none existent udevice mdio@3320 instead boards with DM ETH support should use now this driver. - remove RFC tag Commit-notes: - I let the old none DM based implementation in code so boards should work with old implementation. This Code should be removed if all boards are converted to DM/DTS. - add the DM based qe uec driver under drivers/net/qe - Therefore copied the files uccf.c uccf.h uec.h from drivers/qe. So there are a lot of Codingstyle problems currently. I fix them in next version if this RFC patch is OK or it needs some changes. - The dm based driver code is now under drivers/net/qe/dm_qe_uec.c Used a lot of functions from drivers/qe/uec.c - seperated the PHY specific code into seperate file drivers/net/qe/dm_qe_uec_phy.c END |
#
69bd7dfc |
|
05-Oct-2020 |
Rasmus Villemoes <rasmus.villemoes@prevas.dk> |
dm_qe_uec.c: fix indentation in uec_set_mac_if_mode() Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk> Reviewed-by: Heiko Schocher <hs@denx.de> |
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com> |
#
d1998a9f |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename ofdata_to_platdata() to of_to_plat() This name is far too long. Rename it to remove the 'data' bits. This makes it consistent with the platdata->plat rename. Signed-off-by: Simon Glass <sjg@chromium.org> |
#
c69cda25 |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename dev_get_platdata() to dev_get_plat() Rename this to be consistent with the change from 'platdata'. Signed-off-by: Simon Glass <sjg@chromium.org> |
#
caa4daa2 |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename 'platdata' variables to just 'plat' We use 'priv' for private data but often use 'platdata' for platform data. We can't really use 'pdata' since that is ambiguous (it could mean private or platform data). Rename some of the latter variables to end with 'plat' for consistency. Signed-off-by: Simon Glass <sjg@chromium.org> |
#
41575d8e |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename auto_alloc_size members to be shorter This construct is quite long-winded. In earlier days it made some sense since auto-allocation was a strange concept. But with driver model now used pretty universally, we can shorten this to 'auto'. This reduces verbosity and makes it easier to read. Coincidentally it also ensures that every declaration is on one line, thus making dtoc's job easier. Signed-off-by: Simon Glass <sjg@chromium.org> |
#
6e31c62a |
|
06-Feb-2020 |
Heiko Schocher <hs@denx.de> |
net, qe: add DM support for QE UEC ethernet add DM/DTS support for the UEC ethernet on QUICC Engine Block. Signed-off-by: Heiko Schocher <hs@denx.de> Patch-cc: Mario Six <mario.six@gdsys.cc> Patch-cc: Qiang Zhao <qiang.zhao@nxp.com> Patch-cc: Holger Brunck <holger.brunck@hitachi-powergrids.com> Patch-cc: Madalin Bucur <madalin.bucur@oss.nxp.com> Series-changes: 3 - revert: commit "3374264df97b" ("drivers: net: qe: deselect QE when DM_ETH is enabled") as now qe works with DM and DM_ETH support. - fix mailaddress from Holger Series-changes: 2 - add comments from Qiang Zhao: - add device node documentation - I did not drop the dm_qe_uec_phy.c and use drivers/net/fsl_mdio.c because using drivers/net/fsl_mdio.c leads in none existent udevice mdio@3320 instead boards with DM ETH support should use now this driver. - remove RFC tag Commit-notes: - I let the old none DM based implementation in code so boards should work with old implementation. This Code should be removed if all boards are converted to DM/DTS. - add the DM based qe uec driver under drivers/net/qe - Therefore copied the files uccf.c uccf.h uec.h from drivers/qe. So there are a lot of Codingstyle problems currently. I fix them in next version if this RFC patch is OK or it needs some changes. - The dm based driver code is now under drivers/net/qe/dm_qe_uec.c Used a lot of functions from drivers/qe/uec.c - seperated the PHY specific code into seperate file drivers/net/qe/dm_qe_uec_phy.c END |
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com> |
#
d1998a9f |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename ofdata_to_platdata() to of_to_plat() This name is far too long. Rename it to remove the 'data' bits. This makes it consistent with the platdata->plat rename. Signed-off-by: Simon Glass <sjg@chromium.org> |
#
c69cda25 |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename dev_get_platdata() to dev_get_plat() Rename this to be consistent with the change from 'platdata'. Signed-off-by: Simon Glass <sjg@chromium.org> |
#
caa4daa2 |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename 'platdata' variables to just 'plat' We use 'priv' for private data but often use 'platdata' for platform data. We can't really use 'pdata' since that is ambiguous (it could mean private or platform data). Rename some of the latter variables to end with 'plat' for consistency. Signed-off-by: Simon Glass <sjg@chromium.org> |
#
41575d8e |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename auto_alloc_size members to be shorter This construct is quite long-winded. In earlier days it made some sense since auto-allocation was a strange concept. But with driver model now used pretty universally, we can shorten this to 'auto'. This reduces verbosity and makes it easier to read. Coincidentally it also ensures that every declaration is on one line, thus making dtoc's job easier. Signed-off-by: Simon Glass <sjg@chromium.org> |
#
6e31c62a |
|
06-Feb-2020 |
Heiko Schocher <hs@denx.de> |
net, qe: add DM support for QE UEC ethernet add DM/DTS support for the UEC ethernet on QUICC Engine Block. Signed-off-by: Heiko Schocher <hs@denx.de> Patch-cc: Mario Six <mario.six@gdsys.cc> Patch-cc: Qiang Zhao <qiang.zhao@nxp.com> Patch-cc: Holger Brunck <holger.brunck@hitachi-powergrids.com> Patch-cc: Madalin Bucur <madalin.bucur@oss.nxp.com> Series-changes: 3 - revert: commit "3374264df97b" ("drivers: net: qe: deselect QE when DM_ETH is enabled") as now qe works with DM and DM_ETH support. - fix mailaddress from Holger Series-changes: 2 - add comments from Qiang Zhao: - add device node documentation - I did not drop the dm_qe_uec_phy.c and use drivers/net/fsl_mdio.c because using drivers/net/fsl_mdio.c leads in none existent udevice mdio@3320 instead boards with DM ETH support should use now this driver. - remove RFC tag Commit-notes: - I let the old none DM based implementation in code so boards should work with old implementation. This Code should be removed if all boards are converted to DM/DTS. - add the DM based qe uec driver under drivers/net/qe - Therefore copied the files uccf.c uccf.h uec.h from drivers/qe. So there are a lot of Codingstyle problems currently. I fix them in next version if this RFC patch is OK or it needs some changes. - The dm based driver code is now under drivers/net/qe/dm_qe_uec.c Used a lot of functions from drivers/qe/uec.c - seperated the PHY specific code into seperate file drivers/net/qe/dm_qe_uec_phy.c END |
#
d1998a9f |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename ofdata_to_platdata() to of_to_plat() This name is far too long. Rename it to remove the 'data' bits. This makes it consistent with the platdata->plat rename. Signed-off-by: Simon Glass <sjg@chromium.org> |
#
c69cda25 |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename dev_get_platdata() to dev_get_plat() Rename this to be consistent with the change from 'platdata'. Signed-off-by: Simon Glass <sjg@chromium.org> |
#
caa4daa2 |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename 'platdata' variables to just 'plat' We use 'priv' for private data but often use 'platdata' for platform data. We can't really use 'pdata' since that is ambiguous (it could mean private or platform data). Rename some of the latter variables to end with 'plat' for consistency. Signed-off-by: Simon Glass <sjg@chromium.org> |
#
41575d8e |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename auto_alloc_size members to be shorter This construct is quite long-winded. In earlier days it made some sense since auto-allocation was a strange concept. But with driver model now used pretty universally, we can shorten this to 'auto'. This reduces verbosity and makes it easier to read. Coincidentally it also ensures that every declaration is on one line, thus making dtoc's job easier. Signed-off-by: Simon Glass <sjg@chromium.org> |
#
6e31c62a |
|
06-Feb-2020 |
Heiko Schocher <hs@denx.de> |
net, qe: add DM support for QE UEC ethernet add DM/DTS support for the UEC ethernet on QUICC Engine Block. Signed-off-by: Heiko Schocher <hs@denx.de> Patch-cc: Mario Six <mario.six@gdsys.cc> Patch-cc: Qiang Zhao <qiang.zhao@nxp.com> Patch-cc: Holger Brunck <holger.brunck@hitachi-powergrids.com> Patch-cc: Madalin Bucur <madalin.bucur@oss.nxp.com> Series-changes: 3 - revert: commit "3374264df97b" ("drivers: net: qe: deselect QE when DM_ETH is enabled") as now qe works with DM and DM_ETH support. - fix mailaddress from Holger Series-changes: 2 - add comments from Qiang Zhao: - add device node documentation - I did not drop the dm_qe_uec_phy.c and use drivers/net/fsl_mdio.c because using drivers/net/fsl_mdio.c leads in none existent udevice mdio@3320 instead boards with DM ETH support should use now this driver. - remove RFC tag Commit-notes: - I let the old none DM based implementation in code so boards should work with old implementation. This Code should be removed if all boards are converted to DM/DTS. - add the DM based qe uec driver under drivers/net/qe - Therefore copied the files uccf.c uccf.h uec.h from drivers/qe. So there are a lot of Codingstyle problems currently. I fix them in next version if this RFC patch is OK or it needs some changes. - The dm based driver code is now under drivers/net/qe/dm_qe_uec.c Used a lot of functions from drivers/qe/uec.c - seperated the PHY specific code into seperate file drivers/net/qe/dm_qe_uec_phy.c END |
#
6e31c62a |
|
06-Feb-2020 |
Heiko Schocher <hs@denx.de> |
net, qe: add DM support for QE UEC ethernet add DM/DTS support for the UEC ethernet on QUICC Engine Block. Signed-off-by: Heiko Schocher <hs@denx.de> Patch-cc: Mario Six <mario.six@gdsys.cc> Patch-cc: Qiang Zhao <qiang.zhao@nxp.com> Patch-cc: Holger Brunck <holger.brunck@hitachi-powergrids.com> Patch-cc: Madalin Bucur <madalin.bucur@oss.nxp.com> Series-changes: 3 - revert: commit "3374264df97b" ("drivers: net: qe: deselect QE when DM_ETH is enabled") as now qe works with DM and DM_ETH support. - fix mailaddress from Holger Series-changes: 2 - add comments from Qiang Zhao: - add device node documentation - I did not drop the dm_qe_uec_phy.c and use drivers/net/fsl_mdio.c because using drivers/net/fsl_mdio.c leads in none existent udevice mdio@3320 instead boards with DM ETH support should use now this driver. - remove RFC tag Commit-notes: - I let the old none DM based implementation in code so boards should work with old implementation. This Code should be removed if all boards are converted to DM/DTS. - add the DM based qe uec driver under drivers/net/qe - Therefore copied the files uccf.c uccf.h uec.h from drivers/qe. So there are a lot of Codingstyle problems currently. I fix them in next version if this RFC patch is OK or it needs some changes. - The dm based driver code is now under drivers/net/qe/dm_qe_uec.c Used a lot of functions from drivers/qe/uec.c - seperated the PHY specific code into seperate file drivers/net/qe/dm_qe_uec_phy.c END |