#
d678a59d |
|
18-May-2024 |
Tom Rini <trini@konsulko.com> |
Revert "Merge patch series "arm: dts: am62-beagleplay: Fix Beagleplay Ethernet"" When bringing in the series 'arm: dts: am62-beagleplay: Fix Beagleplay Ethernet"' I failed to notice that b4 noticed it was based on next and so took that as the base commit and merged that part of next to master. This reverts commit c8ffd1356d42223cbb8c86280a083cc3c93e6426, reversing changes made to 2ee6f3a5f7550de3599faef9704e166e5dcace35. Reported-by: Jonas Karlman <jonas@kwiboo.se> Signed-off-by: Tom Rini <trini@konsulko.com> |
#
0e407c74 |
|
01-May-2024 |
Tom Rini <trini@konsulko.com> |
net: Remove <common.h> and add needed includes Remove <common.h> from this driver directory and when needed add missing include files directly. Signed-off-by: Tom Rini <trini@konsulko.com> |
#
cc2bf624 |
|
27-Nov-2022 |
Tom Rini <trini@konsulko.com> |
net: fm: Remove non-DM_ETH code As DM_ETH is required for all network drivers, it's now safe to remove the non-DM_ETH support code. Signed-off-by: Tom Rini <trini@konsulko.com> |
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org> |
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org> |
#
123ca114 |
|
06-Apr-2022 |
Marek BehĂșn <kabel@kernel.org> |
net: introduce helpers to get PHY interface mode from a device/ofnode Add helpers ofnode_read_phy_mode() and dev_read_phy_mode() to parse the "phy-mode" / "phy-connection-type" property. Add corresponding UT test. Use them treewide. This allows us to inline the phy_get_interface_by_name() into ofnode_read_phy_mode(), since the former is not used anymore. Signed-off-by: Marek BehĂșn <marek.behun@nic.cz> Reviewed-by: Ramon Fried <rfried.dev@gmail.com> Tested-by: Patrice Chotard <patrice.chotard@foss.st.com> |
#
7c2d5d16 |
|
18-Sep-2021 |
Vladimir Oltean <vladimir.oltean@nxp.com> |
net: freescale: replace usage of phy-mode = "sgmii-2500" with "2500base-x" After the discussion here: https://lore.kernel.org/netdev/20210603143453.if7hgifupx5k433b@pali/ which resulted in this patch: https://patchwork.kernel.org/project/netdevbpf/patch/20210704134325.24842-1-pali@kernel.org/ and many other discussions before it, notably: https://patchwork.kernel.org/project/linux-arm-kernel/patch/1512016235-15909-1-git-send-email-Bhaskar.Upadhaya@nxp.com/ it became apparent that nobody really knows what "SGMII 2500" is. Certainly, Freescale/NXP hardware engineers name this protocol "SGMII 2500" in the reference manuals, but the PCS devices do not support any "SGMII" specific features when operating at the speed of 2500 Mbps, no in-band autoneg and no speed change via symbol replication . So that leaves a fixed speed of 2500 Mbps using a coding of 8b/10b with a SERDES lane frequency of 3.125 GHz. In fact, "SGMII 2500 without in-band autoneg and at a fixed speed" is indistinguishable from "2500base-x without in-band autoneg", which is precisely what these NXP devices support. So it just appears that "SGMII 2500" is an unclear name with no clear definition that stuck. As such, in the Linux kernel, the drivers which use this SERDES protocol use the 2500base-x phy-mode. This patch converts U-Boot to use 2500base-x too, or at least, as much as it can. Note that I would have really liked to delete PHY_INTERFACE_MODE_SGMII_2500 completely, but the mvpp2 driver seems to even distinguish between SGMII 2500 and 2500base-X. Namely, it enables in-band autoneg for one but not the other, and forces flow control for one but not the other. This goes back to the idea that maybe 2500base-X is a fiber protocol and SGMII-2500 is an MII protocol (connects a MAC to a PHY such as Aquantia), but the two are practically indistinguishable through everything except use case. NXP devices can support both use cases through an identical configuration, for example RX flow control can be unconditionally enabled in order to support rate adaptation performed by an Aquantia PHY. At least I can find no indication in online documents published by Cisco which would point towards "SGMII-2500" being an actual standard with an actual definition, so I cannot say "yes, NXP devices support it". Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Ramon Fried <rfried.dev@gmail.com> |
#
3e184877 |
|
12-Jun-2021 |
Hou Zhiqiang <Zhiqiang.Hou@nxp.com> |
Fix a memory leak issue in the RX port initialization. Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> Reviewed-by: Ramon Fried <rfried.dev@gmail.com> |
#
f10643cf |
|
19-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: core: Access device ofnode through functions At present ofnode is present in the device even if it is never used. With of-platdata this field is not used, so can be removed. In preparation for this, change the access to go through inline functions. Signed-off-by: Simon Glass <sjg@chromium.org> |
#
0fd3d911 |
|
22-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: Use access methods for dev/uclass private data Most drivers use these access methods but a few do not. Update them. In some cases the access is not permitted, so mark those with a FIXME tag for the maintainer to check. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Pratyush Yadav <p.yadav@ti.com> |
#
c69cda25 |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename dev_get_platdata() to dev_get_plat() Rename this to be consistent with the change from 'platdata'. Signed-off-by: Simon Glass <sjg@chromium.org> |
#
caa4daa2 |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename 'platdata' variables to just 'plat' We use 'priv' for private data but often use 'platdata' for platform data. We can't really use 'pdata' since that is ambiguous (it could mean private or platform data). Rename some of the latter variables to end with 'plat' for consistency. Signed-off-by: Simon Glass <sjg@chromium.org> |
#
41575d8e |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename auto_alloc_size members to be shorter This construct is quite long-winded. In earlier days it made some sense since auto-allocation was a strange concept. But with driver model now used pretty universally, we can shorten this to 'auto'. This reduces verbosity and makes it easier to read. Coincidentally it also ensures that every declaration is on one line, thus making dtoc's job easier. Signed-off-by: Simon Glass <sjg@chromium.org> |
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> |
#
b0b13f41 |
|
20-May-2020 |
Tom Rini <trini@konsulko.com> |
Merge https://gitlab.denx.de/u-boot/custodians/u-boot-fsl-qoriq - Add DM_ETH support for lx2160aqds, ls2080aqds, ls1088aqds - QSI related fixes on ls1012a, ls2080a, ls1046a, ls1088a, ls1043a based platforms - Bug-fixes/updtaes related to ls1046afrwy, fsl-mc, msi-map property
|
#
9b2e892e |
|
04-May-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: minor fix in DM ETH support Bus callback functions for read/write/reset need to be set only for DM_ETH, moving endif a bit lower. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com> |
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org> |
#
f7ae49fc |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop log.h from common header Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org> |
#
e6f6f9e6 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop part.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org> |
#
6eb32a03 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: add DM ETH support Probe the FMan MACs based on the device tree while retaining the legacy code/functionality. One notable change introduced here is that, for DM_ETH, the name of the interfaces is corrected to the fmX-macY format, that avoids the referral to the MAC block names which were incorrect for FMan v3 devices (i.e. DTSEC, TGEC) and had weird formatting (i.e. FM1@DTSEC6, FM1@TGEC1). The legacy code is left unchanged in this respect. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com> |
#
1c710187 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: separate receive buffer free code Move the receive buffer free code in a separate function. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com> |
#
8313cb02 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: change init_phy() param Change the init_phy() parameter to simplify the code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com> |
#
83d290c5 |
|
06-May-2018 |
Tom Rini <trini@konsulko.com> |
SPDX: Convert all of our single license tags to Linux Kernel style When U-Boot started using SPDX tags we were among the early adopters and there weren't a lot of other examples to borrow from. So we picked the area of the file that usually had a full license text and replaced it with an appropriate SPDX-License-Identifier: entry. Since then, the Linux Kernel has adopted SPDX tags and they place it as the very first line in a file (except where shebangs are used, then it's second line) and with slightly different comment styles than us. In part due to community overlap, in part due to better tag visibility and in part for other minor reasons, switch over to that style. This commit changes all instances where we have a single declared license in the tag as both the before and after are identical in tag contents. There's also a few places where I found we did not have a tag and have introduced one. Signed-off-by: Tom Rini <trini@konsulko.com> |
#
bead0880 |
|
14-Nov-2016 |
shaohui xie <shaohui.xie@nxp.com> |
net: fman: fix 2.5G SGMII settings The settings for 2.5G SGMII are wrong, which the 2.5G case is missed in set_if_mode(), and the serdes PCS configuration are wrong, this patch uses the correct settings took from Linux. Signed-off-by: Shaohui Xie <Shaohui.Xie@nxp.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com> |
#
bc24611c |
|
26-Oct-2015 |
Shaohui Xie <Shaohui.Xie@freescale.com> |
net/fm: Add QSGMII PCS init QSGMII PCS needed to be programmed same as SGMII PCS, and there are four ports in QSGMII PCS, port 0, 1, 2, 3, all the four ports shared port 0's MDIO controller, so when programming port 0, we continue to program other three ports. Signed-off-by: Shaohui Xie <Shaohui.Xie@freescale.com> Signed-off-by: Mingkai Hu <Mingkai.Hu@freescale.com> Signed-off-by: Gong Qianyu <Qianyu.Gong@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com> |
#
8225b2fd |
|
26-Oct-2015 |
Shaohui Xie <Shaohui.Xie@freescale.com> |
net: Move some header files to include/ The fsl_dtsec.h & fsl_tgec.h & fsl_fman.h can be shared on both ARM and PPC, move it out of ppc to include/, and change the path in drivers accordingly. Signed-off-by: Shaohui Xie <Shaohui.Xie@freescale.com> Signed-off-by: Gong Qianyu <Qianyu.Gong@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com> |
#
29d8c814 |
|
26-Oct-2015 |
Shaohui Xie <Shaohui.Xie@freescale.com> |
net: fm: bug fix when CONFIG_PHYLIB not defined codes related to phylib operations should be wrapped by CONFIG_PHYLIB. Signed-off-by: Shaohui Xie <Shaohui.Xie@freescale.com> Signed-off-by: Gong Qianyu <Qianyu.Gong@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com> |
#
0f2cb9f5 |
|
26-Oct-2015 |
Hou Zhiqiang <B48286@freescale.com> |
net/fm: Make the return value logic consistent with convention In convention, the '0' is a normal return value indicating there isn't an error. While some functions of FMan IM driver treat '0' as an error return value. Signed-off-by: Hou Zhiqiang <B48286@freescale.com> Signed-off-by: Gong Qianyu <Qianyu.Gong@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com> |
#
9fc29db1 |
|
26-Oct-2015 |
Hou Zhiqiang <B48286@freescale.com> |
net/fm: Add support for 64-bit platforms The FMan IM driver is developed for 32-bit platfroms and isn't friendly to 64-bit platforms, so do the minimal refactor: 1. Refine the MURAM management and access. 2. Correct the initialization and operations for QDs and BDs. Signed-off-by: Hou Zhiqiang <B48286@freescale.com> Signed-off-by: Gong Qianyu <Qianyu.Gong@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com> |
#
648bde6d |
|
26-Oct-2015 |
Hou Zhiqiang <B48286@freescale.com> |
net/fm: Fix the endian issue to support both endianness platforms The Frame Manager(FMan) is a big-endian peripheral, so the registers, internal MURAM and BDs, which are allocated in main memory and used to communication between core and FMan, should be accessed in big-endian. The big-endian platforms can access them directly as the code implemented so far, while for the little-endian platforms it need to swap the byte-order. Signed-off-by: Hou Zhiqiang <B48286@freescale.com> Signed-off-by: Shaohui Xie <Shaohui.Xie@freescale.com> Signed-off-by: Mingkai Hu <Mingkai.Hu@freescale.com> Signed-off-by: Gong Qianyu <Qianyu.Gong@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com> |
#
466f775e |
|
10-Jul-2015 |
Daniel Inderbitzin <daniel.inderbitzin@crypto.ch> |
qoriq eth.c bugfix: handle received corrupted frames correctly The rxbd is not correctly handled in case of a frame physical error (FPE) or frame size error (FSE). The rxbd must be cleared and advanced in case of an error to avoid receive stall. Signed-off-by: Daniel Inderbitzin <daniel.inderbitzin@gmail.com> |
#
cd348efa |
|
20-Mar-2015 |
Shaohui Xie <Shaohui.Xie@freescale.com> |
net/memac_phy: reuse driver for little endian SoCs The memac for PHY management on little endian SoCs is similar on big endian SoCs, so we modify the driver by using I/O accessor function to handle the endianness, so the driver can be reused on little endian SoCs, we introduce CONFIG_SYS_MEMAC_LITTLE_ENDIAN for little endian SoCs, if the CONFIG_SYS_MEMAC_LITTLE_ENDIAN is defined, the I/O access is little endian, if not, the I/O access is big endian. Move fsl_memac.h out of powerpc include. Signed-off-by: Shaohui Xie <Shaohui.Xie@freescale.com> Signed-off-by: York Sun <yorksun@freescale.com> |
#
1fd92db8 |
|
08-Apr-2015 |
Joe Hershberger <joe.hershberger@ni.com> |
net: cosmetic: Fix var naming net <-> eth drivers Update the naming convention used in the network stack functions and variables that Ethernet drivers use to interact with it. This cleans up the temporary hacks that were added to this interface along with the DM support. This patch has a few remaining checkpatch.pl failures that would be out of the scope of this patch to fix (drivers that are in gross violation of checkpatch.pl). Signed-off-by: Joe Hershberger <joe.hershberger@ni.com> Acked-by: Simon Glass <sjg@chromium.org> |
#
6798c324 |
|
12-Jan-2015 |
Codrin Ciubotariu <codrin.ciubotariu@freescale.com> |
net/fm: Fix error when FMAN MAC has no PHY U-boot assumes that all FMAN ports have a PHY. Some SoCs (like T1040) have fixed links. This means that the ports are connected MAC to MAc and there is no Ethernet PHY attatched. This patch initializes a FMAN MAC even if it doesn't have a PHY attached. Signed-off-by: Codrin Ciubotariu <codrin.ciubotariu@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com> |
#
cc19c25e |
|
24-Nov-2014 |
Shengzhou Liu <Shengzhou.Liu@freescale.com> |
net/fman: update 10GEC to fit new SoC fm_standard_init() initializes each 10G port by FM_TGEC_INFO_INITIALIZER. but it needs different implementation of FM_TGEC_INFO_INITIALIZER on different SoCs. on SoCs earlier(e.g. T4240, T2080), the notation between 10GEC and MAC as below: 10GEC1->MAC9, 10GEC2->MAC10, 10GEC3->MAC1, 10GEC4->MAC2 on SoCs later(e.g. T1024, etc), the notation between 10GEC and MAC as below: 10GEC1->MAC1, 10GEC2->MAC2 so we introduce CONFIG_FSL_FM_10GEC_REGULAR_NOTATION to fit the new SoCs on which 10GEC enumeration is consistent with MAC enumeration. Signed-off-by: Shengzhou Liu <Shengzhou.Liu@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com> |
#
c35f8693 |
|
23-Oct-2014 |
Shengzhou Liu <Shengzhou.Liu@freescale.com> |
net/fm: add 2.5G SGMII support As auto-negotiation is not supported for 2.5G SGMII, we need to add a new type PHY_INTERFACE_MODE_SGMII_2500 to differentiate SGMII-1G and SGMII-2.5G with different setting for auto-negotiation. Signed-off-by: Shaohui Xie <Shaohui.Xie@freescale.com> Signed-off-by: Shengzhou Liu <Shengzhou.Liu@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com> |
#
82a55c1e |
|
22-Nov-2013 |
Shengzhou Liu <Shengzhou.Liu@freescale.com> |
net/fman: Add support for 10GEC3 and 10GEC4 There are more than two 10GEC in single FMAN in some SoCs(e.g. T2080). This patch adds support for 10GEC3 and 10GEC4. Signed-off-by: Shengzhou Liu <Shengzhou.Liu@freescale.com> |
#
1c68d01e |
|
19-Aug-2013 |
Shaohui Xie <Shaohui.Xie@freescale.com> |
powerpc/t4240: add QSGMII interface support Also some fix for QSGMII. 1. fix QSGMII configure of Serdes2. 2. fix PHY address of QSGMII MAC9 & MAC10 for each FMAN. 3. fix dtb for QSGMII interface. Signed-off-by: Shaohui Xie <Shaohui.Xie@freescale.com> Acked-by: York Sun <yorksun@freescale.com> |
#
1a459660 |
|
08-Jul-2013 |
Wolfgang Denk <wd@denx.de> |
Add GPL-2.0+ SPDX-License-Identifier to source files Signed-off-by: Wolfgang Denk <wd@denx.de> [trini: Fixup common/cmd_io.c] Signed-off-by: Tom Rini <trini@ti.com> |
#
944b6ccf |
|
25-Mar-2013 |
Shaohui Xie <Shaohui.Xie@freescale.com> |
Fman/t4240: some fix for 10G XAUI 1. fix 10G mac offset by plus 8; 2. add second 10G port info for FM1 & FM2 when init ethernet info; 3. fix 10G lanes name to match lane protocol table; Signed-off-by: Shaohui Xie <Shaohui.Xie@freescale.com> Signed-off-by: Roy Zang <tie-fei.zang@freescale.com> Signed-off-by: Andy Fleming <afleming@freescale.com> |
#
960d70c6 |
|
29-Oct-2012 |
Kim Phillips <kim.phillips@freescale.com> |
drivers/net/: sparse fixes phy.c:46:5: warning: symbol 'genphy_config_advert' was not declared. Should it be static? phy.c:121:5: warning: symbol 'genphy_setup_forced' was not declared. Should it be static? phy.c:468:5: warning: symbol 'phy_probe' was not declared. Should it be static? phy.c:491:19: warning: symbol 'get_phy_driver' was not declared. Should it be static? phy.c:508:19: warning: symbol 'phy_device_create' was not declared. Should it be static? phy.c:552:5: warning: symbol 'get_phy_id' was not declared. Should it be static? phy.c:584:19: warning: symbol 'get_phy_device' was not declared. Should it be sta vitesse.c:126:5: warning: symbol 'vsc8601_config' was not declared. Should it be static? vsc7385.c:33:5: warning: symbol 'vsc7385_upload_firmware' was not declared. Should it be static? tgec_phy.c:33:5: warning: symbol 'tgec_mdio_write' was not declared. Should it be static? tgec_phy.c:75:5: warning: symbol 'tgec_mdio_read' was not declared. Should it be static? tgec_phy.c:117:5: warning: symbol 'tgec_mdio_reset' was not declared. Should it be static? eth.c:48:6: warning: symbol 'dtsec_configure_serdes' was not declared. Should it be static? p4080.c:26:5: warning: symbol 'port_to_devdisr' was not declared. Should it be static? Signed-off-by: Kim Phillips <kim.phillips@freescale.com> |
#
1f3bd3e2 |
|
11-Oct-2012 |
Shaohui Xie <Shaohui.Xie@freescale.com> |
powerpc/fm: fix TBI PHY address settings TBI PHY address (TBIPA) register is set in general frame manager phy init funciton dtsec_init_phy() in drivers/net/fm/eth.c, and it is supposed to set TBIPA on FM1@DTSEC1 in case of FM1@DTSEC1 isn't used directly, which provides MDIO for other ports. So following code is wrong in case of FM2, which has a different mac base. struct dtsec *regs = (struct dtsec *)fm_eth->mac->base; /* Assign a Physical address to the TBI */ out_be32(®s->tbipa, CONFIG_SYS_TBIPA_VALUE); Signed-off-by: Shaohui Xie <Shaohui.Xie@freescale.com> Signed-off-by: Andy Fleming <afleming@freescale.com> |
#
111fd19e |
|
08-Oct-2012 |
Roy Zang <tie-fei.zang@freescale.com> |
fm/mEMAC: add mEMAC frame work The multirate ethernet media access controller (mEMAC) interfaces to 10Gbps and below Ethernet/IEEE 802.3 networks via either RGMII/RMII interfaces or XAUI/XFI/SGMII/QSGMII using the high-speed SerDes interface. Signed-off-by: Sandeep Singh <Sandeep@freescale.com> Signed-off-by: Poonam Aggrwal <poonam.aggrwal@freescale.com> Signed-off-by: Roy Zang <tie-fei.zang@freescale.com> Signed-off-by: Andy Fleming <afleming@freescale.com> |
#
11af8d65 |
|
09-Jul-2012 |
Timur Tabi <timur@freescale.com> |
net: abort network initialization if the PHY driver fails Now that phy_startup() can return an actual error code, check for that error code and abort network initialization if the PHY fails. Signed-off-by: Timur Tabi <timur@freescale.com> Acked-by: Nobuhiro Iwamamatsu <nobuhiro.iwamatsu.yj@renesas.com> (sh_eth part) Acked-by: Stephan Linz <linz@li-pro.net> (Xilinx part, xilinx_axi_emac and xilinx_ll_temac) Reviewed-by: Marek Vasut <marex@denx.de> (FEC part) |
#
e9df2018 |
|
22-May-2012 |
Joe Hershberger <joe.hershberger@ni.com> |
drivers/net/fm/eth.c: Fix compile warning Fix this: eth.c: In function 'fm_eth_initialize': eth.c:651:12: warning: assignment from incompatible pointer type Signed-off-by: Joe Hershberger <joe.hershberger@ni.com> |
#
30381716 |
|
04-Oct-2011 |
Timur Tabi <timur@freescale.com> |
powerpc/85xx: fix null pointer dereference when init the SGMII TBI PHY Function dtsec_configure_serdes() needs to know where the TBI PHY registers are in order to configure SGMII for proper SerDes operation. During SGMII initialzation, fm_eth_init_mac() passing NULL for 'phyregs' when it called init_dtsec(), because it was believed that phyregs was not used. In fact, it is used by dtsec_configure_serdes() to configure the TBI PHY registers. We also need to define the PHY registers in struct fm_mdio. Signed-off-by: Timur Tabi <timur@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
#
c916d7c9 |
|
13-Apr-2011 |
Kumar Gala <galak@kernel.crashing.org> |
powerpc/85xx: Add support for FMan ethernet in Independent mode The Frame Manager (FMan) on QorIQ SoCs with DPAA (datapath acceleration architecture) is the ethernet contoller block. Normally it is utilized via Queue Manager (Qman) and Buffer Manager (Bman). However for boot usage the FMan supports a mode similar to QE or CPM ethernet collers called Independent mode. Additionally the FMan block supports multiple 1g and 10g interfaces as a single entity in the system rather than each controller being managed uniquely. This means we have to initialize all of Fman regardless of the number of interfaces we utilize. Different SoCs support different combinations of the number of FMan as well as the number of 1g & 10g interfaces support per Fman. We add support for the following SoCs: * P1023 - 1 Fman, 2x1g * P4080 - 2 Fman, each Fman has 4x1g and 1x10g * P204x/P3041/P5020 - 1 Fman, 5x1g, 1x10g Signed-off-by: Dave Liu <daveliu@freescale.com> Signed-off-by: Andy Fleming <afleming@freescale.com> Signed-off-by: Timur Tabi <timur@freescale.com> Signed-off-by: Roy Zang <tie-fei.zang@freescale.com> Signed-off-by: Dai Haruki <dai.haruki@freescale.com> Signed-off-by: Kim Phillips <kim.phillips@freescale.com> Signed-off-by: Ioana Radulescu <ruxandra.radulescu@freescale.com> Signed-off-by: Lei Xu <B33228@freescale.com> Signed-off-by: Mingkai Hu <Mingkai.hu@freescale.com> Signed-off-by: Scott Wood <scottwood@freescale.com> Signed-off-by: Shaohui Xie <b21989@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
#
0e407c74 |
|
01-May-2024 |
Tom Rini <trini@konsulko.com> |
net: Remove <common.h> and add needed includes Remove <common.h> from this driver directory and when needed add missing include files directly. Signed-off-by: Tom Rini <trini@konsulko.com> |
#
cc2bf624 |
|
27-Nov-2022 |
Tom Rini <trini@konsulko.com> |
net: fm: Remove non-DM_ETH code As DM_ETH is required for all network drivers, it's now safe to remove the non-DM_ETH support code. Signed-off-by: Tom Rini <trini@konsulko.com> |
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org> |
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org> |
#
123ca114 |
|
06-Apr-2022 |
Marek BehĂșn <kabel@kernel.org> |
net: introduce helpers to get PHY interface mode from a device/ofnode Add helpers ofnode_read_phy_mode() and dev_read_phy_mode() to parse the "phy-mode" / "phy-connection-type" property. Add corresponding UT test. Use them treewide. This allows us to inline the phy_get_interface_by_name() into ofnode_read_phy_mode(), since the former is not used anymore. Signed-off-by: Marek BehĂșn <marek.behun@nic.cz> Reviewed-by: Ramon Fried <rfried.dev@gmail.com> Tested-by: Patrice Chotard <patrice.chotard@foss.st.com> |
#
7c2d5d16 |
|
18-Sep-2021 |
Vladimir Oltean <vladimir.oltean@nxp.com> |
net: freescale: replace usage of phy-mode = "sgmii-2500" with "2500base-x" After the discussion here: https://lore.kernel.org/netdev/20210603143453.if7hgifupx5k433b@pali/ which resulted in this patch: https://patchwork.kernel.org/project/netdevbpf/patch/20210704134325.24842-1-pali@kernel.org/ and many other discussions before it, notably: https://patchwork.kernel.org/project/linux-arm-kernel/patch/1512016235-15909-1-git-send-email-Bhaskar.Upadhaya@nxp.com/ it became apparent that nobody really knows what "SGMII 2500" is. Certainly, Freescale/NXP hardware engineers name this protocol "SGMII 2500" in the reference manuals, but the PCS devices do not support any "SGMII" specific features when operating at the speed of 2500 Mbps, no in-band autoneg and no speed change via symbol replication . So that leaves a fixed speed of 2500 Mbps using a coding of 8b/10b with a SERDES lane frequency of 3.125 GHz. In fact, "SGMII 2500 without in-band autoneg and at a fixed speed" is indistinguishable from "2500base-x without in-band autoneg", which is precisely what these NXP devices support. So it just appears that "SGMII 2500" is an unclear name with no clear definition that stuck. As such, in the Linux kernel, the drivers which use this SERDES protocol use the 2500base-x phy-mode. This patch converts U-Boot to use 2500base-x too, or at least, as much as it can. Note that I would have really liked to delete PHY_INTERFACE_MODE_SGMII_2500 completely, but the mvpp2 driver seems to even distinguish between SGMII 2500 and 2500base-X. Namely, it enables in-band autoneg for one but not the other, and forces flow control for one but not the other. This goes back to the idea that maybe 2500base-X is a fiber protocol and SGMII-2500 is an MII protocol (connects a MAC to a PHY such as Aquantia), but the two are practically indistinguishable through everything except use case. NXP devices can support both use cases through an identical configuration, for example RX flow control can be unconditionally enabled in order to support rate adaptation performed by an Aquantia PHY. At least I can find no indication in online documents published by Cisco which would point towards "SGMII-2500" being an actual standard with an actual definition, so I cannot say "yes, NXP devices support it". Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Ramon Fried <rfried.dev@gmail.com> |
#
3e184877 |
|
12-Jun-2021 |
Hou Zhiqiang <Zhiqiang.Hou@nxp.com> |
Fix a memory leak issue in the RX port initialization. Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> Reviewed-by: Ramon Fried <rfried.dev@gmail.com> |
#
f10643cf |
|
19-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: core: Access device ofnode through functions At present ofnode is present in the device even if it is never used. With of-platdata this field is not used, so can be removed. In preparation for this, change the access to go through inline functions. Signed-off-by: Simon Glass <sjg@chromium.org> |
#
0fd3d911 |
|
22-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: Use access methods for dev/uclass private data Most drivers use these access methods but a few do not. Update them. In some cases the access is not permitted, so mark those with a FIXME tag for the maintainer to check. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Pratyush Yadav <p.yadav@ti.com> |
#
c69cda25 |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename dev_get_platdata() to dev_get_plat() Rename this to be consistent with the change from 'platdata'. Signed-off-by: Simon Glass <sjg@chromium.org> |
#
caa4daa2 |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename 'platdata' variables to just 'plat' We use 'priv' for private data but often use 'platdata' for platform data. We can't really use 'pdata' since that is ambiguous (it could mean private or platform data). Rename some of the latter variables to end with 'plat' for consistency. Signed-off-by: Simon Glass <sjg@chromium.org> |
#
41575d8e |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename auto_alloc_size members to be shorter This construct is quite long-winded. In earlier days it made some sense since auto-allocation was a strange concept. But with driver model now used pretty universally, we can shorten this to 'auto'. This reduces verbosity and makes it easier to read. Coincidentally it also ensures that every declaration is on one line, thus making dtoc's job easier. Signed-off-by: Simon Glass <sjg@chromium.org> |
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> |
#
b0b13f41 |
|
20-May-2020 |
Tom Rini <trini@konsulko.com> |
Merge https://gitlab.denx.de/u-boot/custodians/u-boot-fsl-qoriq - Add DM_ETH support for lx2160aqds, ls2080aqds, ls1088aqds - QSI related fixes on ls1012a, ls2080a, ls1046a, ls1088a, ls1043a based platforms - Bug-fixes/updtaes related to ls1046afrwy, fsl-mc, msi-map property
|
#
9b2e892e |
|
04-May-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: minor fix in DM ETH support Bus callback functions for read/write/reset need to be set only for DM_ETH, moving endif a bit lower. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com> |
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org> |
#
f7ae49fc |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop log.h from common header Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org> |
#
e6f6f9e6 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop part.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org> |
#
6eb32a03 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: add DM ETH support Probe the FMan MACs based on the device tree while retaining the legacy code/functionality. One notable change introduced here is that, for DM_ETH, the name of the interfaces is corrected to the fmX-macY format, that avoids the referral to the MAC block names which were incorrect for FMan v3 devices (i.e. DTSEC, TGEC) and had weird formatting (i.e. FM1@DTSEC6, FM1@TGEC1). The legacy code is left unchanged in this respect. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com> |
#
1c710187 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: separate receive buffer free code Move the receive buffer free code in a separate function. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com> |
#
8313cb02 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: change init_phy() param Change the init_phy() parameter to simplify the code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com> |
#
83d290c5 |
|
06-May-2018 |
Tom Rini <trini@konsulko.com> |
SPDX: Convert all of our single license tags to Linux Kernel style When U-Boot started using SPDX tags we were among the early adopters and there weren't a lot of other examples to borrow from. So we picked the area of the file that usually had a full license text and replaced it with an appropriate SPDX-License-Identifier: entry. Since then, the Linux Kernel has adopted SPDX tags and they place it as the very first line in a file (except where shebangs are used, then it's second line) and with slightly different comment styles than us. In part due to community overlap, in part due to better tag visibility and in part for other minor reasons, switch over to that style. This commit changes all instances where we have a single declared license in the tag as both the before and after are identical in tag contents. There's also a few places where I found we did not have a tag and have introduced one. Signed-off-by: Tom Rini <trini@konsulko.com> |
#
bead0880 |
|
14-Nov-2016 |
shaohui xie <shaohui.xie@nxp.com> |
net: fman: fix 2.5G SGMII settings The settings for 2.5G SGMII are wrong, which the 2.5G case is missed in set_if_mode(), and the serdes PCS configuration are wrong, this patch uses the correct settings took from Linux. Signed-off-by: Shaohui Xie <Shaohui.Xie@nxp.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com> |
#
bc24611c |
|
26-Oct-2015 |
Shaohui Xie <Shaohui.Xie@freescale.com> |
net/fm: Add QSGMII PCS init QSGMII PCS needed to be programmed same as SGMII PCS, and there are four ports in QSGMII PCS, port 0, 1, 2, 3, all the four ports shared port 0's MDIO controller, so when programming port 0, we continue to program other three ports. Signed-off-by: Shaohui Xie <Shaohui.Xie@freescale.com> Signed-off-by: Mingkai Hu <Mingkai.Hu@freescale.com> Signed-off-by: Gong Qianyu <Qianyu.Gong@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com> |
#
8225b2fd |
|
26-Oct-2015 |
Shaohui Xie <Shaohui.Xie@freescale.com> |
net: Move some header files to include/ The fsl_dtsec.h & fsl_tgec.h & fsl_fman.h can be shared on both ARM and PPC, move it out of ppc to include/, and change the path in drivers accordingly. Signed-off-by: Shaohui Xie <Shaohui.Xie@freescale.com> Signed-off-by: Gong Qianyu <Qianyu.Gong@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com> |
#
29d8c814 |
|
26-Oct-2015 |
Shaohui Xie <Shaohui.Xie@freescale.com> |
net: fm: bug fix when CONFIG_PHYLIB not defined codes related to phylib operations should be wrapped by CONFIG_PHYLIB. Signed-off-by: Shaohui Xie <Shaohui.Xie@freescale.com> Signed-off-by: Gong Qianyu <Qianyu.Gong@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com> |
#
0f2cb9f5 |
|
26-Oct-2015 |
Hou Zhiqiang <B48286@freescale.com> |
net/fm: Make the return value logic consistent with convention In convention, the '0' is a normal return value indicating there isn't an error. While some functions of FMan IM driver treat '0' as an error return value. Signed-off-by: Hou Zhiqiang <B48286@freescale.com> Signed-off-by: Gong Qianyu <Qianyu.Gong@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com> |
#
9fc29db1 |
|
26-Oct-2015 |
Hou Zhiqiang <B48286@freescale.com> |
net/fm: Add support for 64-bit platforms The FMan IM driver is developed for 32-bit platfroms and isn't friendly to 64-bit platforms, so do the minimal refactor: 1. Refine the MURAM management and access. 2. Correct the initialization and operations for QDs and BDs. Signed-off-by: Hou Zhiqiang <B48286@freescale.com> Signed-off-by: Gong Qianyu <Qianyu.Gong@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com> |
#
648bde6d |
|
26-Oct-2015 |
Hou Zhiqiang <B48286@freescale.com> |
net/fm: Fix the endian issue to support both endianness platforms The Frame Manager(FMan) is a big-endian peripheral, so the registers, internal MURAM and BDs, which are allocated in main memory and used to communication between core and FMan, should be accessed in big-endian. The big-endian platforms can access them directly as the code implemented so far, while for the little-endian platforms it need to swap the byte-order. Signed-off-by: Hou Zhiqiang <B48286@freescale.com> Signed-off-by: Shaohui Xie <Shaohui.Xie@freescale.com> Signed-off-by: Mingkai Hu <Mingkai.Hu@freescale.com> Signed-off-by: Gong Qianyu <Qianyu.Gong@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com> |
#
466f775e |
|
10-Jul-2015 |
Daniel Inderbitzin <daniel.inderbitzin@crypto.ch> |
qoriq eth.c bugfix: handle received corrupted frames correctly The rxbd is not correctly handled in case of a frame physical error (FPE) or frame size error (FSE). The rxbd must be cleared and advanced in case of an error to avoid receive stall. Signed-off-by: Daniel Inderbitzin <daniel.inderbitzin@gmail.com> |
#
cd348efa |
|
20-Mar-2015 |
Shaohui Xie <Shaohui.Xie@freescale.com> |
net/memac_phy: reuse driver for little endian SoCs The memac for PHY management on little endian SoCs is similar on big endian SoCs, so we modify the driver by using I/O accessor function to handle the endianness, so the driver can be reused on little endian SoCs, we introduce CONFIG_SYS_MEMAC_LITTLE_ENDIAN for little endian SoCs, if the CONFIG_SYS_MEMAC_LITTLE_ENDIAN is defined, the I/O access is little endian, if not, the I/O access is big endian. Move fsl_memac.h out of powerpc include. Signed-off-by: Shaohui Xie <Shaohui.Xie@freescale.com> Signed-off-by: York Sun <yorksun@freescale.com> |
#
1fd92db8 |
|
08-Apr-2015 |
Joe Hershberger <joe.hershberger@ni.com> |
net: cosmetic: Fix var naming net <-> eth drivers Update the naming convention used in the network stack functions and variables that Ethernet drivers use to interact with it. This cleans up the temporary hacks that were added to this interface along with the DM support. This patch has a few remaining checkpatch.pl failures that would be out of the scope of this patch to fix (drivers that are in gross violation of checkpatch.pl). Signed-off-by: Joe Hershberger <joe.hershberger@ni.com> Acked-by: Simon Glass <sjg@chromium.org> |
#
6798c324 |
|
12-Jan-2015 |
Codrin Ciubotariu <codrin.ciubotariu@freescale.com> |
net/fm: Fix error when FMAN MAC has no PHY U-boot assumes that all FMAN ports have a PHY. Some SoCs (like T1040) have fixed links. This means that the ports are connected MAC to MAc and there is no Ethernet PHY attatched. This patch initializes a FMAN MAC even if it doesn't have a PHY attached. Signed-off-by: Codrin Ciubotariu <codrin.ciubotariu@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com> |
#
cc19c25e |
|
24-Nov-2014 |
Shengzhou Liu <Shengzhou.Liu@freescale.com> |
net/fman: update 10GEC to fit new SoC fm_standard_init() initializes each 10G port by FM_TGEC_INFO_INITIALIZER. but it needs different implementation of FM_TGEC_INFO_INITIALIZER on different SoCs. on SoCs earlier(e.g. T4240, T2080), the notation between 10GEC and MAC as below: 10GEC1->MAC9, 10GEC2->MAC10, 10GEC3->MAC1, 10GEC4->MAC2 on SoCs later(e.g. T1024, etc), the notation between 10GEC and MAC as below: 10GEC1->MAC1, 10GEC2->MAC2 so we introduce CONFIG_FSL_FM_10GEC_REGULAR_NOTATION to fit the new SoCs on which 10GEC enumeration is consistent with MAC enumeration. Signed-off-by: Shengzhou Liu <Shengzhou.Liu@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com> |
#
c35f8693 |
|
23-Oct-2014 |
Shengzhou Liu <Shengzhou.Liu@freescale.com> |
net/fm: add 2.5G SGMII support As auto-negotiation is not supported for 2.5G SGMII, we need to add a new type PHY_INTERFACE_MODE_SGMII_2500 to differentiate SGMII-1G and SGMII-2.5G with different setting for auto-negotiation. Signed-off-by: Shaohui Xie <Shaohui.Xie@freescale.com> Signed-off-by: Shengzhou Liu <Shengzhou.Liu@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com> |
#
82a55c1e |
|
22-Nov-2013 |
Shengzhou Liu <Shengzhou.Liu@freescale.com> |
net/fman: Add support for 10GEC3 and 10GEC4 There are more than two 10GEC in single FMAN in some SoCs(e.g. T2080). This patch adds support for 10GEC3 and 10GEC4. Signed-off-by: Shengzhou Liu <Shengzhou.Liu@freescale.com> |
#
1c68d01e |
|
19-Aug-2013 |
Shaohui Xie <Shaohui.Xie@freescale.com> |
powerpc/t4240: add QSGMII interface support Also some fix for QSGMII. 1. fix QSGMII configure of Serdes2. 2. fix PHY address of QSGMII MAC9 & MAC10 for each FMAN. 3. fix dtb for QSGMII interface. Signed-off-by: Shaohui Xie <Shaohui.Xie@freescale.com> Acked-by: York Sun <yorksun@freescale.com> |
#
1a459660 |
|
08-Jul-2013 |
Wolfgang Denk <wd@denx.de> |
Add GPL-2.0+ SPDX-License-Identifier to source files Signed-off-by: Wolfgang Denk <wd@denx.de> [trini: Fixup common/cmd_io.c] Signed-off-by: Tom Rini <trini@ti.com> |
#
944b6ccf |
|
25-Mar-2013 |
Shaohui Xie <Shaohui.Xie@freescale.com> |
Fman/t4240: some fix for 10G XAUI 1. fix 10G mac offset by plus 8; 2. add second 10G port info for FM1 & FM2 when init ethernet info; 3. fix 10G lanes name to match lane protocol table; Signed-off-by: Shaohui Xie <Shaohui.Xie@freescale.com> Signed-off-by: Roy Zang <tie-fei.zang@freescale.com> Signed-off-by: Andy Fleming <afleming@freescale.com> |
#
960d70c6 |
|
29-Oct-2012 |
Kim Phillips <kim.phillips@freescale.com> |
drivers/net/: sparse fixes phy.c:46:5: warning: symbol 'genphy_config_advert' was not declared. Should it be static? phy.c:121:5: warning: symbol 'genphy_setup_forced' was not declared. Should it be static? phy.c:468:5: warning: symbol 'phy_probe' was not declared. Should it be static? phy.c:491:19: warning: symbol 'get_phy_driver' was not declared. Should it be static? phy.c:508:19: warning: symbol 'phy_device_create' was not declared. Should it be static? phy.c:552:5: warning: symbol 'get_phy_id' was not declared. Should it be static? phy.c:584:19: warning: symbol 'get_phy_device' was not declared. Should it be sta vitesse.c:126:5: warning: symbol 'vsc8601_config' was not declared. Should it be static? vsc7385.c:33:5: warning: symbol 'vsc7385_upload_firmware' was not declared. Should it be static? tgec_phy.c:33:5: warning: symbol 'tgec_mdio_write' was not declared. Should it be static? tgec_phy.c:75:5: warning: symbol 'tgec_mdio_read' was not declared. Should it be static? tgec_phy.c:117:5: warning: symbol 'tgec_mdio_reset' was not declared. Should it be static? eth.c:48:6: warning: symbol 'dtsec_configure_serdes' was not declared. Should it be static? p4080.c:26:5: warning: symbol 'port_to_devdisr' was not declared. Should it be static? Signed-off-by: Kim Phillips <kim.phillips@freescale.com> |
#
1f3bd3e2 |
|
11-Oct-2012 |
Shaohui Xie <Shaohui.Xie@freescale.com> |
powerpc/fm: fix TBI PHY address settings TBI PHY address (TBIPA) register is set in general frame manager phy init funciton dtsec_init_phy() in drivers/net/fm/eth.c, and it is supposed to set TBIPA on FM1@DTSEC1 in case of FM1@DTSEC1 isn't used directly, which provides MDIO for other ports. So following code is wrong in case of FM2, which has a different mac base. struct dtsec *regs = (struct dtsec *)fm_eth->mac->base; /* Assign a Physical address to the TBI */ out_be32(®s->tbipa, CONFIG_SYS_TBIPA_VALUE); Signed-off-by: Shaohui Xie <Shaohui.Xie@freescale.com> Signed-off-by: Andy Fleming <afleming@freescale.com> |
#
111fd19e |
|
08-Oct-2012 |
Roy Zang <tie-fei.zang@freescale.com> |
fm/mEMAC: add mEMAC frame work The multirate ethernet media access controller (mEMAC) interfaces to 10Gbps and below Ethernet/IEEE 802.3 networks via either RGMII/RMII interfaces or XAUI/XFI/SGMII/QSGMII using the high-speed SerDes interface. Signed-off-by: Sandeep Singh <Sandeep@freescale.com> Signed-off-by: Poonam Aggrwal <poonam.aggrwal@freescale.com> Signed-off-by: Roy Zang <tie-fei.zang@freescale.com> Signed-off-by: Andy Fleming <afleming@freescale.com> |
#
11af8d65 |
|
09-Jul-2012 |
Timur Tabi <timur@freescale.com> |
net: abort network initialization if the PHY driver fails Now that phy_startup() can return an actual error code, check for that error code and abort network initialization if the PHY fails. Signed-off-by: Timur Tabi <timur@freescale.com> Acked-by: Nobuhiro Iwamamatsu <nobuhiro.iwamatsu.yj@renesas.com> (sh_eth part) Acked-by: Stephan Linz <linz@li-pro.net> (Xilinx part, xilinx_axi_emac and xilinx_ll_temac) Reviewed-by: Marek Vasut <marex@denx.de> (FEC part) |
#
e9df2018 |
|
22-May-2012 |
Joe Hershberger <joe.hershberger@ni.com> |
drivers/net/fm/eth.c: Fix compile warning Fix this: eth.c: In function 'fm_eth_initialize': eth.c:651:12: warning: assignment from incompatible pointer type Signed-off-by: Joe Hershberger <joe.hershberger@ni.com> |
#
30381716 |
|
04-Oct-2011 |
Timur Tabi <timur@freescale.com> |
powerpc/85xx: fix null pointer dereference when init the SGMII TBI PHY Function dtsec_configure_serdes() needs to know where the TBI PHY registers are in order to configure SGMII for proper SerDes operation. During SGMII initialzation, fm_eth_init_mac() passing NULL for 'phyregs' when it called init_dtsec(), because it was believed that phyregs was not used. In fact, it is used by dtsec_configure_serdes() to configure the TBI PHY registers. We also need to define the PHY registers in struct fm_mdio. Signed-off-by: Timur Tabi <timur@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
#
c916d7c9 |
|
13-Apr-2011 |
Kumar Gala <galak@kernel.crashing.org> |
powerpc/85xx: Add support for FMan ethernet in Independent mode The Frame Manager (FMan) on QorIQ SoCs with DPAA (datapath acceleration architecture) is the ethernet contoller block. Normally it is utilized via Queue Manager (Qman) and Buffer Manager (Bman). However for boot usage the FMan supports a mode similar to QE or CPM ethernet collers called Independent mode. Additionally the FMan block supports multiple 1g and 10g interfaces as a single entity in the system rather than each controller being managed uniquely. This means we have to initialize all of Fman regardless of the number of interfaces we utilize. Different SoCs support different combinations of the number of FMan as well as the number of 1g & 10g interfaces support per Fman. We add support for the following SoCs: * P1023 - 1 Fman, 2x1g * P4080 - 2 Fman, each Fman has 4x1g and 1x10g * P204x/P3041/P5020 - 1 Fman, 5x1g, 1x10g Signed-off-by: Dave Liu <daveliu@freescale.com> Signed-off-by: Andy Fleming <afleming@freescale.com> Signed-off-by: Timur Tabi <timur@freescale.com> Signed-off-by: Roy Zang <tie-fei.zang@freescale.com> Signed-off-by: Dai Haruki <dai.haruki@freescale.com> Signed-off-by: Kim Phillips <kim.phillips@freescale.com> Signed-off-by: Ioana Radulescu <ruxandra.radulescu@freescale.com> Signed-off-by: Lei Xu <B33228@freescale.com> Signed-off-by: Mingkai Hu <Mingkai.hu@freescale.com> Signed-off-by: Scott Wood <scottwood@freescale.com> Signed-off-by: Shaohui Xie <b21989@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
#
cc2bf624 |
|
27-Nov-2022 |
Tom Rini <trini@konsulko.com> |
net: fm: Remove non-DM_ETH code As DM_ETH is required for all network drivers, it's now safe to remove the non-DM_ETH support code. Signed-off-by: Tom Rini <trini@konsulko.com> |
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org> |
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org> |
#
123ca114 |
|
06-Apr-2022 |
Marek BehĂșn <kabel@kernel.org> |
net: introduce helpers to get PHY interface mode from a device/ofnode Add helpers ofnode_read_phy_mode() and dev_read_phy_mode() to parse the "phy-mode" / "phy-connection-type" property. Add corresponding UT test. Use them treewide. This allows us to inline the phy_get_interface_by_name() into ofnode_read_phy_mode(), since the former is not used anymore. Signed-off-by: Marek BehĂșn <marek.behun@nic.cz> Reviewed-by: Ramon Fried <rfried.dev@gmail.com> Tested-by: Patrice Chotard <patrice.chotard@foss.st.com> |
#
7c2d5d16 |
|
18-Sep-2021 |
Vladimir Oltean <vladimir.oltean@nxp.com> |
net: freescale: replace usage of phy-mode = "sgmii-2500" with "2500base-x" After the discussion here: https://lore.kernel.org/netdev/20210603143453.if7hgifupx5k433b@pali/ which resulted in this patch: https://patchwork.kernel.org/project/netdevbpf/patch/20210704134325.24842-1-pali@kernel.org/ and many other discussions before it, notably: https://patchwork.kernel.org/project/linux-arm-kernel/patch/1512016235-15909-1-git-send-email-Bhaskar.Upadhaya@nxp.com/ it became apparent that nobody really knows what "SGMII 2500" is. Certainly, Freescale/NXP hardware engineers name this protocol "SGMII 2500" in the reference manuals, but the PCS devices do not support any "SGMII" specific features when operating at the speed of 2500 Mbps, no in-band autoneg and no speed change via symbol replication . So that leaves a fixed speed of 2500 Mbps using a coding of 8b/10b with a SERDES lane frequency of 3.125 GHz. In fact, "SGMII 2500 without in-band autoneg and at a fixed speed" is indistinguishable from "2500base-x without in-band autoneg", which is precisely what these NXP devices support. So it just appears that "SGMII 2500" is an unclear name with no clear definition that stuck. As such, in the Linux kernel, the drivers which use this SERDES protocol use the 2500base-x phy-mode. This patch converts U-Boot to use 2500base-x too, or at least, as much as it can. Note that I would have really liked to delete PHY_INTERFACE_MODE_SGMII_2500 completely, but the mvpp2 driver seems to even distinguish between SGMII 2500 and 2500base-X. Namely, it enables in-band autoneg for one but not the other, and forces flow control for one but not the other. This goes back to the idea that maybe 2500base-X is a fiber protocol and SGMII-2500 is an MII protocol (connects a MAC to a PHY such as Aquantia), but the two are practically indistinguishable through everything except use case. NXP devices can support both use cases through an identical configuration, for example RX flow control can be unconditionally enabled in order to support rate adaptation performed by an Aquantia PHY. At least I can find no indication in online documents published by Cisco which would point towards "SGMII-2500" being an actual standard with an actual definition, so I cannot say "yes, NXP devices support it". Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Ramon Fried <rfried.dev@gmail.com> |
#
3e184877 |
|
12-Jun-2021 |
Hou Zhiqiang <Zhiqiang.Hou@nxp.com> |
Fix a memory leak issue in the RX port initialization. Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> Reviewed-by: Ramon Fried <rfried.dev@gmail.com> |
#
f10643cf |
|
19-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: core: Access device ofnode through functions At present ofnode is present in the device even if it is never used. With of-platdata this field is not used, so can be removed. In preparation for this, change the access to go through inline functions. Signed-off-by: Simon Glass <sjg@chromium.org> |
#
0fd3d911 |
|
22-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: Use access methods for dev/uclass private data Most drivers use these access methods but a few do not. Update them. In some cases the access is not permitted, so mark those with a FIXME tag for the maintainer to check. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Pratyush Yadav <p.yadav@ti.com> |
#
c69cda25 |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename dev_get_platdata() to dev_get_plat() Rename this to be consistent with the change from 'platdata'. Signed-off-by: Simon Glass <sjg@chromium.org> |
#
caa4daa2 |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename 'platdata' variables to just 'plat' We use 'priv' for private data but often use 'platdata' for platform data. We can't really use 'pdata' since that is ambiguous (it could mean private or platform data). Rename some of the latter variables to end with 'plat' for consistency. Signed-off-by: Simon Glass <sjg@chromium.org> |
#
41575d8e |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename auto_alloc_size members to be shorter This construct is quite long-winded. In earlier days it made some sense since auto-allocation was a strange concept. But with driver model now used pretty universally, we can shorten this to 'auto'. This reduces verbosity and makes it easier to read. Coincidentally it also ensures that every declaration is on one line, thus making dtoc's job easier. Signed-off-by: Simon Glass <sjg@chromium.org> |
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> |
#
b0b13f41 |
|
20-May-2020 |
Tom Rini <trini@konsulko.com> |
Merge https://gitlab.denx.de/u-boot/custodians/u-boot-fsl-qoriq - Add DM_ETH support for lx2160aqds, ls2080aqds, ls1088aqds - QSI related fixes on ls1012a, ls2080a, ls1046a, ls1088a, ls1043a based platforms - Bug-fixes/updtaes related to ls1046afrwy, fsl-mc, msi-map property
|
#
9b2e892e |
|
04-May-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: minor fix in DM ETH support Bus callback functions for read/write/reset need to be set only for DM_ETH, moving endif a bit lower. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com> |
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org> |
#
f7ae49fc |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop log.h from common header Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org> |
#
e6f6f9e6 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop part.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org> |
#
6eb32a03 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: add DM ETH support Probe the FMan MACs based on the device tree while retaining the legacy code/functionality. One notable change introduced here is that, for DM_ETH, the name of the interfaces is corrected to the fmX-macY format, that avoids the referral to the MAC block names which were incorrect for FMan v3 devices (i.e. DTSEC, TGEC) and had weird formatting (i.e. FM1@DTSEC6, FM1@TGEC1). The legacy code is left unchanged in this respect. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com> |
#
1c710187 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: separate receive buffer free code Move the receive buffer free code in a separate function. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com> |
#
8313cb02 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: change init_phy() param Change the init_phy() parameter to simplify the code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com> |
#
83d290c5 |
|
06-May-2018 |
Tom Rini <trini@konsulko.com> |
SPDX: Convert all of our single license tags to Linux Kernel style When U-Boot started using SPDX tags we were among the early adopters and there weren't a lot of other examples to borrow from. So we picked the area of the file that usually had a full license text and replaced it with an appropriate SPDX-License-Identifier: entry. Since then, the Linux Kernel has adopted SPDX tags and they place it as the very first line in a file (except where shebangs are used, then it's second line) and with slightly different comment styles than us. In part due to community overlap, in part due to better tag visibility and in part for other minor reasons, switch over to that style. This commit changes all instances where we have a single declared license in the tag as both the before and after are identical in tag contents. There's also a few places where I found we did not have a tag and have introduced one. Signed-off-by: Tom Rini <trini@konsulko.com> |
#
bead0880 |
|
14-Nov-2016 |
shaohui xie <shaohui.xie@nxp.com> |
net: fman: fix 2.5G SGMII settings The settings for 2.5G SGMII are wrong, which the 2.5G case is missed in set_if_mode(), and the serdes PCS configuration are wrong, this patch uses the correct settings took from Linux. Signed-off-by: Shaohui Xie <Shaohui.Xie@nxp.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com> |
#
bc24611c |
|
26-Oct-2015 |
Shaohui Xie <Shaohui.Xie@freescale.com> |
net/fm: Add QSGMII PCS init QSGMII PCS needed to be programmed same as SGMII PCS, and there are four ports in QSGMII PCS, port 0, 1, 2, 3, all the four ports shared port 0's MDIO controller, so when programming port 0, we continue to program other three ports. Signed-off-by: Shaohui Xie <Shaohui.Xie@freescale.com> Signed-off-by: Mingkai Hu <Mingkai.Hu@freescale.com> Signed-off-by: Gong Qianyu <Qianyu.Gong@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com> |
#
8225b2fd |
|
26-Oct-2015 |
Shaohui Xie <Shaohui.Xie@freescale.com> |
net: Move some header files to include/ The fsl_dtsec.h & fsl_tgec.h & fsl_fman.h can be shared on both ARM and PPC, move it out of ppc to include/, and change the path in drivers accordingly. Signed-off-by: Shaohui Xie <Shaohui.Xie@freescale.com> Signed-off-by: Gong Qianyu <Qianyu.Gong@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com> |
#
29d8c814 |
|
26-Oct-2015 |
Shaohui Xie <Shaohui.Xie@freescale.com> |
net: fm: bug fix when CONFIG_PHYLIB not defined codes related to phylib operations should be wrapped by CONFIG_PHYLIB. Signed-off-by: Shaohui Xie <Shaohui.Xie@freescale.com> Signed-off-by: Gong Qianyu <Qianyu.Gong@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com> |
#
0f2cb9f5 |
|
26-Oct-2015 |
Hou Zhiqiang <B48286@freescale.com> |
net/fm: Make the return value logic consistent with convention In convention, the '0' is a normal return value indicating there isn't an error. While some functions of FMan IM driver treat '0' as an error return value. Signed-off-by: Hou Zhiqiang <B48286@freescale.com> Signed-off-by: Gong Qianyu <Qianyu.Gong@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com> |
#
9fc29db1 |
|
26-Oct-2015 |
Hou Zhiqiang <B48286@freescale.com> |
net/fm: Add support for 64-bit platforms The FMan IM driver is developed for 32-bit platfroms and isn't friendly to 64-bit platforms, so do the minimal refactor: 1. Refine the MURAM management and access. 2. Correct the initialization and operations for QDs and BDs. Signed-off-by: Hou Zhiqiang <B48286@freescale.com> Signed-off-by: Gong Qianyu <Qianyu.Gong@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com> |
#
648bde6d |
|
26-Oct-2015 |
Hou Zhiqiang <B48286@freescale.com> |
net/fm: Fix the endian issue to support both endianness platforms The Frame Manager(FMan) is a big-endian peripheral, so the registers, internal MURAM and BDs, which are allocated in main memory and used to communication between core and FMan, should be accessed in big-endian. The big-endian platforms can access them directly as the code implemented so far, while for the little-endian platforms it need to swap the byte-order. Signed-off-by: Hou Zhiqiang <B48286@freescale.com> Signed-off-by: Shaohui Xie <Shaohui.Xie@freescale.com> Signed-off-by: Mingkai Hu <Mingkai.Hu@freescale.com> Signed-off-by: Gong Qianyu <Qianyu.Gong@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com> |
#
466f775e |
|
10-Jul-2015 |
Daniel Inderbitzin <daniel.inderbitzin@crypto.ch> |
qoriq eth.c bugfix: handle received corrupted frames correctly The rxbd is not correctly handled in case of a frame physical error (FPE) or frame size error (FSE). The rxbd must be cleared and advanced in case of an error to avoid receive stall. Signed-off-by: Daniel Inderbitzin <daniel.inderbitzin@gmail.com> |
#
cd348efa |
|
20-Mar-2015 |
Shaohui Xie <Shaohui.Xie@freescale.com> |
net/memac_phy: reuse driver for little endian SoCs The memac for PHY management on little endian SoCs is similar on big endian SoCs, so we modify the driver by using I/O accessor function to handle the endianness, so the driver can be reused on little endian SoCs, we introduce CONFIG_SYS_MEMAC_LITTLE_ENDIAN for little endian SoCs, if the CONFIG_SYS_MEMAC_LITTLE_ENDIAN is defined, the I/O access is little endian, if not, the I/O access is big endian. Move fsl_memac.h out of powerpc include. Signed-off-by: Shaohui Xie <Shaohui.Xie@freescale.com> Signed-off-by: York Sun <yorksun@freescale.com> |
#
1fd92db8 |
|
08-Apr-2015 |
Joe Hershberger <joe.hershberger@ni.com> |
net: cosmetic: Fix var naming net <-> eth drivers Update the naming convention used in the network stack functions and variables that Ethernet drivers use to interact with it. This cleans up the temporary hacks that were added to this interface along with the DM support. This patch has a few remaining checkpatch.pl failures that would be out of the scope of this patch to fix (drivers that are in gross violation of checkpatch.pl). Signed-off-by: Joe Hershberger <joe.hershberger@ni.com> Acked-by: Simon Glass <sjg@chromium.org> |
#
6798c324 |
|
12-Jan-2015 |
Codrin Ciubotariu <codrin.ciubotariu@freescale.com> |
net/fm: Fix error when FMAN MAC has no PHY U-boot assumes that all FMAN ports have a PHY. Some SoCs (like T1040) have fixed links. This means that the ports are connected MAC to MAc and there is no Ethernet PHY attatched. This patch initializes a FMAN MAC even if it doesn't have a PHY attached. Signed-off-by: Codrin Ciubotariu <codrin.ciubotariu@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com> |
#
cc19c25e |
|
24-Nov-2014 |
Shengzhou Liu <Shengzhou.Liu@freescale.com> |
net/fman: update 10GEC to fit new SoC fm_standard_init() initializes each 10G port by FM_TGEC_INFO_INITIALIZER. but it needs different implementation of FM_TGEC_INFO_INITIALIZER on different SoCs. on SoCs earlier(e.g. T4240, T2080), the notation between 10GEC and MAC as below: 10GEC1->MAC9, 10GEC2->MAC10, 10GEC3->MAC1, 10GEC4->MAC2 on SoCs later(e.g. T1024, etc), the notation between 10GEC and MAC as below: 10GEC1->MAC1, 10GEC2->MAC2 so we introduce CONFIG_FSL_FM_10GEC_REGULAR_NOTATION to fit the new SoCs on which 10GEC enumeration is consistent with MAC enumeration. Signed-off-by: Shengzhou Liu <Shengzhou.Liu@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com> |
#
c35f8693 |
|
23-Oct-2014 |
Shengzhou Liu <Shengzhou.Liu@freescale.com> |
net/fm: add 2.5G SGMII support As auto-negotiation is not supported for 2.5G SGMII, we need to add a new type PHY_INTERFACE_MODE_SGMII_2500 to differentiate SGMII-1G and SGMII-2.5G with different setting for auto-negotiation. Signed-off-by: Shaohui Xie <Shaohui.Xie@freescale.com> Signed-off-by: Shengzhou Liu <Shengzhou.Liu@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com> |
#
82a55c1e |
|
22-Nov-2013 |
Shengzhou Liu <Shengzhou.Liu@freescale.com> |
net/fman: Add support for 10GEC3 and 10GEC4 There are more than two 10GEC in single FMAN in some SoCs(e.g. T2080). This patch adds support for 10GEC3 and 10GEC4. Signed-off-by: Shengzhou Liu <Shengzhou.Liu@freescale.com> |
#
1c68d01e |
|
19-Aug-2013 |
Shaohui Xie <Shaohui.Xie@freescale.com> |
powerpc/t4240: add QSGMII interface support Also some fix for QSGMII. 1. fix QSGMII configure of Serdes2. 2. fix PHY address of QSGMII MAC9 & MAC10 for each FMAN. 3. fix dtb for QSGMII interface. Signed-off-by: Shaohui Xie <Shaohui.Xie@freescale.com> Acked-by: York Sun <yorksun@freescale.com> |
#
1a459660 |
|
08-Jul-2013 |
Wolfgang Denk <wd@denx.de> |
Add GPL-2.0+ SPDX-License-Identifier to source files Signed-off-by: Wolfgang Denk <wd@denx.de> [trini: Fixup common/cmd_io.c] Signed-off-by: Tom Rini <trini@ti.com> |
#
944b6ccf |
|
25-Mar-2013 |
Shaohui Xie <Shaohui.Xie@freescale.com> |
Fman/t4240: some fix for 10G XAUI 1. fix 10G mac offset by plus 8; 2. add second 10G port info for FM1 & FM2 when init ethernet info; 3. fix 10G lanes name to match lane protocol table; Signed-off-by: Shaohui Xie <Shaohui.Xie@freescale.com> Signed-off-by: Roy Zang <tie-fei.zang@freescale.com> Signed-off-by: Andy Fleming <afleming@freescale.com> |
#
960d70c6 |
|
29-Oct-2012 |
Kim Phillips <kim.phillips@freescale.com> |
drivers/net/: sparse fixes phy.c:46:5: warning: symbol 'genphy_config_advert' was not declared. Should it be static? phy.c:121:5: warning: symbol 'genphy_setup_forced' was not declared. Should it be static? phy.c:468:5: warning: symbol 'phy_probe' was not declared. Should it be static? phy.c:491:19: warning: symbol 'get_phy_driver' was not declared. Should it be static? phy.c:508:19: warning: symbol 'phy_device_create' was not declared. Should it be static? phy.c:552:5: warning: symbol 'get_phy_id' was not declared. Should it be static? phy.c:584:19: warning: symbol 'get_phy_device' was not declared. Should it be sta vitesse.c:126:5: warning: symbol 'vsc8601_config' was not declared. Should it be static? vsc7385.c:33:5: warning: symbol 'vsc7385_upload_firmware' was not declared. Should it be static? tgec_phy.c:33:5: warning: symbol 'tgec_mdio_write' was not declared. Should it be static? tgec_phy.c:75:5: warning: symbol 'tgec_mdio_read' was not declared. Should it be static? tgec_phy.c:117:5: warning: symbol 'tgec_mdio_reset' was not declared. Should it be static? eth.c:48:6: warning: symbol 'dtsec_configure_serdes' was not declared. Should it be static? p4080.c:26:5: warning: symbol 'port_to_devdisr' was not declared. Should it be static? Signed-off-by: Kim Phillips <kim.phillips@freescale.com> |
#
1f3bd3e2 |
|
11-Oct-2012 |
Shaohui Xie <Shaohui.Xie@freescale.com> |
powerpc/fm: fix TBI PHY address settings TBI PHY address (TBIPA) register is set in general frame manager phy init funciton dtsec_init_phy() in drivers/net/fm/eth.c, and it is supposed to set TBIPA on FM1@DTSEC1 in case of FM1@DTSEC1 isn't used directly, which provides MDIO for other ports. So following code is wrong in case of FM2, which has a different mac base. struct dtsec *regs = (struct dtsec *)fm_eth->mac->base; /* Assign a Physical address to the TBI */ out_be32(®s->tbipa, CONFIG_SYS_TBIPA_VALUE); Signed-off-by: Shaohui Xie <Shaohui.Xie@freescale.com> Signed-off-by: Andy Fleming <afleming@freescale.com> |
#
111fd19e |
|
08-Oct-2012 |
Roy Zang <tie-fei.zang@freescale.com> |
fm/mEMAC: add mEMAC frame work The multirate ethernet media access controller (mEMAC) interfaces to 10Gbps and below Ethernet/IEEE 802.3 networks via either RGMII/RMII interfaces or XAUI/XFI/SGMII/QSGMII using the high-speed SerDes interface. Signed-off-by: Sandeep Singh <Sandeep@freescale.com> Signed-off-by: Poonam Aggrwal <poonam.aggrwal@freescale.com> Signed-off-by: Roy Zang <tie-fei.zang@freescale.com> Signed-off-by: Andy Fleming <afleming@freescale.com> |
#
11af8d65 |
|
09-Jul-2012 |
Timur Tabi <timur@freescale.com> |
net: abort network initialization if the PHY driver fails Now that phy_startup() can return an actual error code, check for that error code and abort network initialization if the PHY fails. Signed-off-by: Timur Tabi <timur@freescale.com> Acked-by: Nobuhiro Iwamamatsu <nobuhiro.iwamatsu.yj@renesas.com> (sh_eth part) Acked-by: Stephan Linz <linz@li-pro.net> (Xilinx part, xilinx_axi_emac and xilinx_ll_temac) Reviewed-by: Marek Vasut <marex@denx.de> (FEC part) |
#
e9df2018 |
|
22-May-2012 |
Joe Hershberger <joe.hershberger@ni.com> |
drivers/net/fm/eth.c: Fix compile warning Fix this: eth.c: In function 'fm_eth_initialize': eth.c:651:12: warning: assignment from incompatible pointer type Signed-off-by: Joe Hershberger <joe.hershberger@ni.com> |
#
30381716 |
|
04-Oct-2011 |
Timur Tabi <timur@freescale.com> |
powerpc/85xx: fix null pointer dereference when init the SGMII TBI PHY Function dtsec_configure_serdes() needs to know where the TBI PHY registers are in order to configure SGMII for proper SerDes operation. During SGMII initialzation, fm_eth_init_mac() passing NULL for 'phyregs' when it called init_dtsec(), because it was believed that phyregs was not used. In fact, it is used by dtsec_configure_serdes() to configure the TBI PHY registers. We also need to define the PHY registers in struct fm_mdio. Signed-off-by: Timur Tabi <timur@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
#
c916d7c9 |
|
13-Apr-2011 |
Kumar Gala <galak@kernel.crashing.org> |
powerpc/85xx: Add support for FMan ethernet in Independent mode The Frame Manager (FMan) on QorIQ SoCs with DPAA (datapath acceleration architecture) is the ethernet contoller block. Normally it is utilized via Queue Manager (Qman) and Buffer Manager (Bman). However for boot usage the FMan supports a mode similar to QE or CPM ethernet collers called Independent mode. Additionally the FMan block supports multiple 1g and 10g interfaces as a single entity in the system rather than each controller being managed uniquely. This means we have to initialize all of Fman regardless of the number of interfaces we utilize. Different SoCs support different combinations of the number of FMan as well as the number of 1g & 10g interfaces support per Fman. We add support for the following SoCs: * P1023 - 1 Fman, 2x1g * P4080 - 2 Fman, each Fman has 4x1g and 1x10g * P204x/P3041/P5020 - 1 Fman, 5x1g, 1x10g Signed-off-by: Dave Liu <daveliu@freescale.com> Signed-off-by: Andy Fleming <afleming@freescale.com> Signed-off-by: Timur Tabi <timur@freescale.com> Signed-off-by: Roy Zang <tie-fei.zang@freescale.com> Signed-off-by: Dai Haruki <dai.haruki@freescale.com> Signed-off-by: Kim Phillips <kim.phillips@freescale.com> Signed-off-by: Ioana Radulescu <ruxandra.radulescu@freescale.com> Signed-off-by: Lei Xu <B33228@freescale.com> Signed-off-by: Mingkai Hu <Mingkai.hu@freescale.com> Signed-off-by: Scott Wood <scottwood@freescale.com> Signed-off-by: Shaohui Xie <b21989@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
#
6cc04547 |
|
28-Oct-2022 |
Tom Rini <trini@konsulko.com> |
global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org> |
#
123ca114 |
|
06-Apr-2022 |
Marek BehĂșn <kabel@kernel.org> |
net: introduce helpers to get PHY interface mode from a device/ofnode Add helpers ofnode_read_phy_mode() and dev_read_phy_mode() to parse the "phy-mode" / "phy-connection-type" property. Add corresponding UT test. Use them treewide. This allows us to inline the phy_get_interface_by_name() into ofnode_read_phy_mode(), since the former is not used anymore. Signed-off-by: Marek BehĂșn <marek.behun@nic.cz> Reviewed-by: Ramon Fried <rfried.dev@gmail.com> Tested-by: Patrice Chotard <patrice.chotard@foss.st.com> |
#
7c2d5d16 |
|
18-Sep-2021 |
Vladimir Oltean <vladimir.oltean@nxp.com> |
net: freescale: replace usage of phy-mode = "sgmii-2500" with "2500base-x" After the discussion here: https://lore.kernel.org/netdev/20210603143453.if7hgifupx5k433b@pali/ which resulted in this patch: https://patchwork.kernel.org/project/netdevbpf/patch/20210704134325.24842-1-pali@kernel.org/ and many other discussions before it, notably: https://patchwork.kernel.org/project/linux-arm-kernel/patch/1512016235-15909-1-git-send-email-Bhaskar.Upadhaya@nxp.com/ it became apparent that nobody really knows what "SGMII 2500" is. Certainly, Freescale/NXP hardware engineers name this protocol "SGMII 2500" in the reference manuals, but the PCS devices do not support any "SGMII" specific features when operating at the speed of 2500 Mbps, no in-band autoneg and no speed change via symbol replication . So that leaves a fixed speed of 2500 Mbps using a coding of 8b/10b with a SERDES lane frequency of 3.125 GHz. In fact, "SGMII 2500 without in-band autoneg and at a fixed speed" is indistinguishable from "2500base-x without in-band autoneg", which is precisely what these NXP devices support. So it just appears that "SGMII 2500" is an unclear name with no clear definition that stuck. As such, in the Linux kernel, the drivers which use this SERDES protocol use the 2500base-x phy-mode. This patch converts U-Boot to use 2500base-x too, or at least, as much as it can. Note that I would have really liked to delete PHY_INTERFACE_MODE_SGMII_2500 completely, but the mvpp2 driver seems to even distinguish between SGMII 2500 and 2500base-X. Namely, it enables in-band autoneg for one but not the other, and forces flow control for one but not the other. This goes back to the idea that maybe 2500base-X is a fiber protocol and SGMII-2500 is an MII protocol (connects a MAC to a PHY such as Aquantia), but the two are practically indistinguishable through everything except use case. NXP devices can support both use cases through an identical configuration, for example RX flow control can be unconditionally enabled in order to support rate adaptation performed by an Aquantia PHY. At least I can find no indication in online documents published by Cisco which would point towards "SGMII-2500" being an actual standard with an actual definition, so I cannot say "yes, NXP devices support it". Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Ramon Fried <rfried.dev@gmail.com> |
#
3e184877 |
|
12-Jun-2021 |
Hou Zhiqiang <Zhiqiang.Hou@nxp.com> |
Fix a memory leak issue in the RX port initialization. Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> Reviewed-by: Ramon Fried <rfried.dev@gmail.com> |
#
f10643cf |
|
19-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: core: Access device ofnode through functions At present ofnode is present in the device even if it is never used. With of-platdata this field is not used, so can be removed. In preparation for this, change the access to go through inline functions. Signed-off-by: Simon Glass <sjg@chromium.org> |
#
0fd3d911 |
|
22-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: Use access methods for dev/uclass private data Most drivers use these access methods but a few do not. Update them. In some cases the access is not permitted, so mark those with a FIXME tag for the maintainer to check. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Pratyush Yadav <p.yadav@ti.com> |
#
c69cda25 |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename dev_get_platdata() to dev_get_plat() Rename this to be consistent with the change from 'platdata'. Signed-off-by: Simon Glass <sjg@chromium.org> |
#
caa4daa2 |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename 'platdata' variables to just 'plat' We use 'priv' for private data but often use 'platdata' for platform data. We can't really use 'pdata' since that is ambiguous (it could mean private or platform data). Rename some of the latter variables to end with 'plat' for consistency. Signed-off-by: Simon Glass <sjg@chromium.org> |
#
41575d8e |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename auto_alloc_size members to be shorter This construct is quite long-winded. In earlier days it made some sense since auto-allocation was a strange concept. But with driver model now used pretty universally, we can shorten this to 'auto'. This reduces verbosity and makes it easier to read. Coincidentally it also ensures that every declaration is on one line, thus making dtoc's job easier. Signed-off-by: Simon Glass <sjg@chromium.org> |
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> |
#
b0b13f41 |
|
20-May-2020 |
Tom Rini <trini@konsulko.com> |
Merge https://gitlab.denx.de/u-boot/custodians/u-boot-fsl-qoriq - Add DM_ETH support for lx2160aqds, ls2080aqds, ls1088aqds - QSI related fixes on ls1012a, ls2080a, ls1046a, ls1088a, ls1043a based platforms - Bug-fixes/updtaes related to ls1046afrwy, fsl-mc, msi-map property
|
#
9b2e892e |
|
04-May-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: minor fix in DM ETH support Bus callback functions for read/write/reset need to be set only for DM_ETH, moving endif a bit lower. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com> |
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org> |
#
f7ae49fc |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop log.h from common header Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org> |
#
e6f6f9e6 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop part.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org> |
#
6eb32a03 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: add DM ETH support Probe the FMan MACs based on the device tree while retaining the legacy code/functionality. One notable change introduced here is that, for DM_ETH, the name of the interfaces is corrected to the fmX-macY format, that avoids the referral to the MAC block names which were incorrect for FMan v3 devices (i.e. DTSEC, TGEC) and had weird formatting (i.e. FM1@DTSEC6, FM1@TGEC1). The legacy code is left unchanged in this respect. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com> |
#
1c710187 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: separate receive buffer free code Move the receive buffer free code in a separate function. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com> |
#
8313cb02 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: change init_phy() param Change the init_phy() parameter to simplify the code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com> |
#
83d290c5 |
|
06-May-2018 |
Tom Rini <trini@konsulko.com> |
SPDX: Convert all of our single license tags to Linux Kernel style When U-Boot started using SPDX tags we were among the early adopters and there weren't a lot of other examples to borrow from. So we picked the area of the file that usually had a full license text and replaced it with an appropriate SPDX-License-Identifier: entry. Since then, the Linux Kernel has adopted SPDX tags and they place it as the very first line in a file (except where shebangs are used, then it's second line) and with slightly different comment styles than us. In part due to community overlap, in part due to better tag visibility and in part for other minor reasons, switch over to that style. This commit changes all instances where we have a single declared license in the tag as both the before and after are identical in tag contents. There's also a few places where I found we did not have a tag and have introduced one. Signed-off-by: Tom Rini <trini@konsulko.com> |
#
bead0880 |
|
14-Nov-2016 |
shaohui xie <shaohui.xie@nxp.com> |
net: fman: fix 2.5G SGMII settings The settings for 2.5G SGMII are wrong, which the 2.5G case is missed in set_if_mode(), and the serdes PCS configuration are wrong, this patch uses the correct settings took from Linux. Signed-off-by: Shaohui Xie <Shaohui.Xie@nxp.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com> |
#
bc24611c |
|
26-Oct-2015 |
Shaohui Xie <Shaohui.Xie@freescale.com> |
net/fm: Add QSGMII PCS init QSGMII PCS needed to be programmed same as SGMII PCS, and there are four ports in QSGMII PCS, port 0, 1, 2, 3, all the four ports shared port 0's MDIO controller, so when programming port 0, we continue to program other three ports. Signed-off-by: Shaohui Xie <Shaohui.Xie@freescale.com> Signed-off-by: Mingkai Hu <Mingkai.Hu@freescale.com> Signed-off-by: Gong Qianyu <Qianyu.Gong@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com> |
#
8225b2fd |
|
26-Oct-2015 |
Shaohui Xie <Shaohui.Xie@freescale.com> |
net: Move some header files to include/ The fsl_dtsec.h & fsl_tgec.h & fsl_fman.h can be shared on both ARM and PPC, move it out of ppc to include/, and change the path in drivers accordingly. Signed-off-by: Shaohui Xie <Shaohui.Xie@freescale.com> Signed-off-by: Gong Qianyu <Qianyu.Gong@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com> |
#
29d8c814 |
|
26-Oct-2015 |
Shaohui Xie <Shaohui.Xie@freescale.com> |
net: fm: bug fix when CONFIG_PHYLIB not defined codes related to phylib operations should be wrapped by CONFIG_PHYLIB. Signed-off-by: Shaohui Xie <Shaohui.Xie@freescale.com> Signed-off-by: Gong Qianyu <Qianyu.Gong@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com> |
#
0f2cb9f5 |
|
26-Oct-2015 |
Hou Zhiqiang <B48286@freescale.com> |
net/fm: Make the return value logic consistent with convention In convention, the '0' is a normal return value indicating there isn't an error. While some functions of FMan IM driver treat '0' as an error return value. Signed-off-by: Hou Zhiqiang <B48286@freescale.com> Signed-off-by: Gong Qianyu <Qianyu.Gong@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com> |
#
9fc29db1 |
|
26-Oct-2015 |
Hou Zhiqiang <B48286@freescale.com> |
net/fm: Add support for 64-bit platforms The FMan IM driver is developed for 32-bit platfroms and isn't friendly to 64-bit platforms, so do the minimal refactor: 1. Refine the MURAM management and access. 2. Correct the initialization and operations for QDs and BDs. Signed-off-by: Hou Zhiqiang <B48286@freescale.com> Signed-off-by: Gong Qianyu <Qianyu.Gong@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com> |
#
648bde6d |
|
26-Oct-2015 |
Hou Zhiqiang <B48286@freescale.com> |
net/fm: Fix the endian issue to support both endianness platforms The Frame Manager(FMan) is a big-endian peripheral, so the registers, internal MURAM and BDs, which are allocated in main memory and used to communication between core and FMan, should be accessed in big-endian. The big-endian platforms can access them directly as the code implemented so far, while for the little-endian platforms it need to swap the byte-order. Signed-off-by: Hou Zhiqiang <B48286@freescale.com> Signed-off-by: Shaohui Xie <Shaohui.Xie@freescale.com> Signed-off-by: Mingkai Hu <Mingkai.Hu@freescale.com> Signed-off-by: Gong Qianyu <Qianyu.Gong@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com> |
#
466f775e |
|
10-Jul-2015 |
Daniel Inderbitzin <daniel.inderbitzin@crypto.ch> |
qoriq eth.c bugfix: handle received corrupted frames correctly The rxbd is not correctly handled in case of a frame physical error (FPE) or frame size error (FSE). The rxbd must be cleared and advanced in case of an error to avoid receive stall. Signed-off-by: Daniel Inderbitzin <daniel.inderbitzin@gmail.com> |
#
cd348efa |
|
20-Mar-2015 |
Shaohui Xie <Shaohui.Xie@freescale.com> |
net/memac_phy: reuse driver for little endian SoCs The memac for PHY management on little endian SoCs is similar on big endian SoCs, so we modify the driver by using I/O accessor function to handle the endianness, so the driver can be reused on little endian SoCs, we introduce CONFIG_SYS_MEMAC_LITTLE_ENDIAN for little endian SoCs, if the CONFIG_SYS_MEMAC_LITTLE_ENDIAN is defined, the I/O access is little endian, if not, the I/O access is big endian. Move fsl_memac.h out of powerpc include. Signed-off-by: Shaohui Xie <Shaohui.Xie@freescale.com> Signed-off-by: York Sun <yorksun@freescale.com> |
#
1fd92db8 |
|
08-Apr-2015 |
Joe Hershberger <joe.hershberger@ni.com> |
net: cosmetic: Fix var naming net <-> eth drivers Update the naming convention used in the network stack functions and variables that Ethernet drivers use to interact with it. This cleans up the temporary hacks that were added to this interface along with the DM support. This patch has a few remaining checkpatch.pl failures that would be out of the scope of this patch to fix (drivers that are in gross violation of checkpatch.pl). Signed-off-by: Joe Hershberger <joe.hershberger@ni.com> Acked-by: Simon Glass <sjg@chromium.org> |
#
6798c324 |
|
12-Jan-2015 |
Codrin Ciubotariu <codrin.ciubotariu@freescale.com> |
net/fm: Fix error when FMAN MAC has no PHY U-boot assumes that all FMAN ports have a PHY. Some SoCs (like T1040) have fixed links. This means that the ports are connected MAC to MAc and there is no Ethernet PHY attatched. This patch initializes a FMAN MAC even if it doesn't have a PHY attached. Signed-off-by: Codrin Ciubotariu <codrin.ciubotariu@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com> |
#
cc19c25e |
|
24-Nov-2014 |
Shengzhou Liu <Shengzhou.Liu@freescale.com> |
net/fman: update 10GEC to fit new SoC fm_standard_init() initializes each 10G port by FM_TGEC_INFO_INITIALIZER. but it needs different implementation of FM_TGEC_INFO_INITIALIZER on different SoCs. on SoCs earlier(e.g. T4240, T2080), the notation between 10GEC and MAC as below: 10GEC1->MAC9, 10GEC2->MAC10, 10GEC3->MAC1, 10GEC4->MAC2 on SoCs later(e.g. T1024, etc), the notation between 10GEC and MAC as below: 10GEC1->MAC1, 10GEC2->MAC2 so we introduce CONFIG_FSL_FM_10GEC_REGULAR_NOTATION to fit the new SoCs on which 10GEC enumeration is consistent with MAC enumeration. Signed-off-by: Shengzhou Liu <Shengzhou.Liu@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com> |
#
c35f8693 |
|
23-Oct-2014 |
Shengzhou Liu <Shengzhou.Liu@freescale.com> |
net/fm: add 2.5G SGMII support As auto-negotiation is not supported for 2.5G SGMII, we need to add a new type PHY_INTERFACE_MODE_SGMII_2500 to differentiate SGMII-1G and SGMII-2.5G with different setting for auto-negotiation. Signed-off-by: Shaohui Xie <Shaohui.Xie@freescale.com> Signed-off-by: Shengzhou Liu <Shengzhou.Liu@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com> |
#
82a55c1e |
|
22-Nov-2013 |
Shengzhou Liu <Shengzhou.Liu@freescale.com> |
net/fman: Add support for 10GEC3 and 10GEC4 There are more than two 10GEC in single FMAN in some SoCs(e.g. T2080). This patch adds support for 10GEC3 and 10GEC4. Signed-off-by: Shengzhou Liu <Shengzhou.Liu@freescale.com> |
#
1c68d01e |
|
19-Aug-2013 |
Shaohui Xie <Shaohui.Xie@freescale.com> |
powerpc/t4240: add QSGMII interface support Also some fix for QSGMII. 1. fix QSGMII configure of Serdes2. 2. fix PHY address of QSGMII MAC9 & MAC10 for each FMAN. 3. fix dtb for QSGMII interface. Signed-off-by: Shaohui Xie <Shaohui.Xie@freescale.com> Acked-by: York Sun <yorksun@freescale.com> |
#
1a459660 |
|
08-Jul-2013 |
Wolfgang Denk <wd@denx.de> |
Add GPL-2.0+ SPDX-License-Identifier to source files Signed-off-by: Wolfgang Denk <wd@denx.de> [trini: Fixup common/cmd_io.c] Signed-off-by: Tom Rini <trini@ti.com> |
#
944b6ccf |
|
25-Mar-2013 |
Shaohui Xie <Shaohui.Xie@freescale.com> |
Fman/t4240: some fix for 10G XAUI 1. fix 10G mac offset by plus 8; 2. add second 10G port info for FM1 & FM2 when init ethernet info; 3. fix 10G lanes name to match lane protocol table; Signed-off-by: Shaohui Xie <Shaohui.Xie@freescale.com> Signed-off-by: Roy Zang <tie-fei.zang@freescale.com> Signed-off-by: Andy Fleming <afleming@freescale.com> |
#
960d70c6 |
|
29-Oct-2012 |
Kim Phillips <kim.phillips@freescale.com> |
drivers/net/: sparse fixes phy.c:46:5: warning: symbol 'genphy_config_advert' was not declared. Should it be static? phy.c:121:5: warning: symbol 'genphy_setup_forced' was not declared. Should it be static? phy.c:468:5: warning: symbol 'phy_probe' was not declared. Should it be static? phy.c:491:19: warning: symbol 'get_phy_driver' was not declared. Should it be static? phy.c:508:19: warning: symbol 'phy_device_create' was not declared. Should it be static? phy.c:552:5: warning: symbol 'get_phy_id' was not declared. Should it be static? phy.c:584:19: warning: symbol 'get_phy_device' was not declared. Should it be sta vitesse.c:126:5: warning: symbol 'vsc8601_config' was not declared. Should it be static? vsc7385.c:33:5: warning: symbol 'vsc7385_upload_firmware' was not declared. Should it be static? tgec_phy.c:33:5: warning: symbol 'tgec_mdio_write' was not declared. Should it be static? tgec_phy.c:75:5: warning: symbol 'tgec_mdio_read' was not declared. Should it be static? tgec_phy.c:117:5: warning: symbol 'tgec_mdio_reset' was not declared. Should it be static? eth.c:48:6: warning: symbol 'dtsec_configure_serdes' was not declared. Should it be static? p4080.c:26:5: warning: symbol 'port_to_devdisr' was not declared. Should it be static? Signed-off-by: Kim Phillips <kim.phillips@freescale.com> |
#
1f3bd3e2 |
|
11-Oct-2012 |
Shaohui Xie <Shaohui.Xie@freescale.com> |
powerpc/fm: fix TBI PHY address settings TBI PHY address (TBIPA) register is set in general frame manager phy init funciton dtsec_init_phy() in drivers/net/fm/eth.c, and it is supposed to set TBIPA on FM1@DTSEC1 in case of FM1@DTSEC1 isn't used directly, which provides MDIO for other ports. So following code is wrong in case of FM2, which has a different mac base. struct dtsec *regs = (struct dtsec *)fm_eth->mac->base; /* Assign a Physical address to the TBI */ out_be32(®s->tbipa, CONFIG_SYS_TBIPA_VALUE); Signed-off-by: Shaohui Xie <Shaohui.Xie@freescale.com> Signed-off-by: Andy Fleming <afleming@freescale.com> |
#
111fd19e |
|
08-Oct-2012 |
Roy Zang <tie-fei.zang@freescale.com> |
fm/mEMAC: add mEMAC frame work The multirate ethernet media access controller (mEMAC) interfaces to 10Gbps and below Ethernet/IEEE 802.3 networks via either RGMII/RMII interfaces or XAUI/XFI/SGMII/QSGMII using the high-speed SerDes interface. Signed-off-by: Sandeep Singh <Sandeep@freescale.com> Signed-off-by: Poonam Aggrwal <poonam.aggrwal@freescale.com> Signed-off-by: Roy Zang <tie-fei.zang@freescale.com> Signed-off-by: Andy Fleming <afleming@freescale.com> |
#
11af8d65 |
|
09-Jul-2012 |
Timur Tabi <timur@freescale.com> |
net: abort network initialization if the PHY driver fails Now that phy_startup() can return an actual error code, check for that error code and abort network initialization if the PHY fails. Signed-off-by: Timur Tabi <timur@freescale.com> Acked-by: Nobuhiro Iwamamatsu <nobuhiro.iwamatsu.yj@renesas.com> (sh_eth part) Acked-by: Stephan Linz <linz@li-pro.net> (Xilinx part, xilinx_axi_emac and xilinx_ll_temac) Reviewed-by: Marek Vasut <marex@denx.de> (FEC part) |
#
e9df2018 |
|
22-May-2012 |
Joe Hershberger <joe.hershberger@ni.com> |
drivers/net/fm/eth.c: Fix compile warning Fix this: eth.c: In function 'fm_eth_initialize': eth.c:651:12: warning: assignment from incompatible pointer type Signed-off-by: Joe Hershberger <joe.hershberger@ni.com> |
#
30381716 |
|
04-Oct-2011 |
Timur Tabi <timur@freescale.com> |
powerpc/85xx: fix null pointer dereference when init the SGMII TBI PHY Function dtsec_configure_serdes() needs to know where the TBI PHY registers are in order to configure SGMII for proper SerDes operation. During SGMII initialzation, fm_eth_init_mac() passing NULL for 'phyregs' when it called init_dtsec(), because it was believed that phyregs was not used. In fact, it is used by dtsec_configure_serdes() to configure the TBI PHY registers. We also need to define the PHY registers in struct fm_mdio. Signed-off-by: Timur Tabi <timur@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
#
c916d7c9 |
|
13-Apr-2011 |
Kumar Gala <galak@kernel.crashing.org> |
powerpc/85xx: Add support for FMan ethernet in Independent mode The Frame Manager (FMan) on QorIQ SoCs with DPAA (datapath acceleration architecture) is the ethernet contoller block. Normally it is utilized via Queue Manager (Qman) and Buffer Manager (Bman). However for boot usage the FMan supports a mode similar to QE or CPM ethernet collers called Independent mode. Additionally the FMan block supports multiple 1g and 10g interfaces as a single entity in the system rather than each controller being managed uniquely. This means we have to initialize all of Fman regardless of the number of interfaces we utilize. Different SoCs support different combinations of the number of FMan as well as the number of 1g & 10g interfaces support per Fman. We add support for the following SoCs: * P1023 - 1 Fman, 2x1g * P4080 - 2 Fman, each Fman has 4x1g and 1x10g * P204x/P3041/P5020 - 1 Fman, 5x1g, 1x10g Signed-off-by: Dave Liu <daveliu@freescale.com> Signed-off-by: Andy Fleming <afleming@freescale.com> Signed-off-by: Timur Tabi <timur@freescale.com> Signed-off-by: Roy Zang <tie-fei.zang@freescale.com> Signed-off-by: Dai Haruki <dai.haruki@freescale.com> Signed-off-by: Kim Phillips <kim.phillips@freescale.com> Signed-off-by: Ioana Radulescu <ruxandra.radulescu@freescale.com> Signed-off-by: Lei Xu <B33228@freescale.com> Signed-off-by: Mingkai Hu <Mingkai.hu@freescale.com> Signed-off-by: Scott Wood <scottwood@freescale.com> Signed-off-by: Shaohui Xie <b21989@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
#
123ca114 |
|
06-Apr-2022 |
Marek BehĂșn <marek.behun@nic.cz> |
net: introduce helpers to get PHY interface mode from a device/ofnode Add helpers ofnode_read_phy_mode() and dev_read_phy_mode() to parse the "phy-mode" / "phy-connection-type" property. Add corresponding UT test. Use them treewide. This allows us to inline the phy_get_interface_by_name() into ofnode_read_phy_mode(), since the former is not used anymore. Signed-off-by: Marek BehĂșn <marek.behun@nic.cz> Reviewed-by: Ramon Fried <rfried.dev@gmail.com> Tested-by: Patrice Chotard <patrice.chotard@foss.st.com> |
#
7c2d5d16 |
|
18-Sep-2021 |
Vladimir Oltean <vladimir.oltean@nxp.com> |
net: freescale: replace usage of phy-mode = "sgmii-2500" with "2500base-x" After the discussion here: https://lore.kernel.org/netdev/20210603143453.if7hgifupx5k433b@pali/ which resulted in this patch: https://patchwork.kernel.org/project/netdevbpf/patch/20210704134325.24842-1-pali@kernel.org/ and many other discussions before it, notably: https://patchwork.kernel.org/project/linux-arm-kernel/patch/1512016235-15909-1-git-send-email-Bhaskar.Upadhaya@nxp.com/ it became apparent that nobody really knows what "SGMII 2500" is. Certainly, Freescale/NXP hardware engineers name this protocol "SGMII 2500" in the reference manuals, but the PCS devices do not support any "SGMII" specific features when operating at the speed of 2500 Mbps, no in-band autoneg and no speed change via symbol replication . So that leaves a fixed speed of 2500 Mbps using a coding of 8b/10b with a SERDES lane frequency of 3.125 GHz. In fact, "SGMII 2500 without in-band autoneg and at a fixed speed" is indistinguishable from "2500base-x without in-band autoneg", which is precisely what these NXP devices support. So it just appears that "SGMII 2500" is an unclear name with no clear definition that stuck. As such, in the Linux kernel, the drivers which use this SERDES protocol use the 2500base-x phy-mode. This patch converts U-Boot to use 2500base-x too, or at least, as much as it can. Note that I would have really liked to delete PHY_INTERFACE_MODE_SGMII_2500 completely, but the mvpp2 driver seems to even distinguish between SGMII 2500 and 2500base-X. Namely, it enables in-band autoneg for one but not the other, and forces flow control for one but not the other. This goes back to the idea that maybe 2500base-X is a fiber protocol and SGMII-2500 is an MII protocol (connects a MAC to a PHY such as Aquantia), but the two are practically indistinguishable through everything except use case. NXP devices can support both use cases through an identical configuration, for example RX flow control can be unconditionally enabled in order to support rate adaptation performed by an Aquantia PHY. At least I can find no indication in online documents published by Cisco which would point towards "SGMII-2500" being an actual standard with an actual definition, so I cannot say "yes, NXP devices support it". Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Ramon Fried <rfried.dev@gmail.com> |
#
3e184877 |
|
12-Jun-2021 |
Hou Zhiqiang <Zhiqiang.Hou@nxp.com> |
Fix a memory leak issue in the RX port initialization. Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> Reviewed-by: Ramon Fried <rfried.dev@gmail.com> |
#
f10643cf |
|
19-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: core: Access device ofnode through functions At present ofnode is present in the device even if it is never used. With of-platdata this field is not used, so can be removed. In preparation for this, change the access to go through inline functions. Signed-off-by: Simon Glass <sjg@chromium.org> |
#
0fd3d911 |
|
22-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: Use access methods for dev/uclass private data Most drivers use these access methods but a few do not. Update them. In some cases the access is not permitted, so mark those with a FIXME tag for the maintainer to check. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Pratyush Yadav <p.yadav@ti.com> |
#
c69cda25 |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename dev_get_platdata() to dev_get_plat() Rename this to be consistent with the change from 'platdata'. Signed-off-by: Simon Glass <sjg@chromium.org> |
#
caa4daa2 |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename 'platdata' variables to just 'plat' We use 'priv' for private data but often use 'platdata' for platform data. We can't really use 'pdata' since that is ambiguous (it could mean private or platform data). Rename some of the latter variables to end with 'plat' for consistency. Signed-off-by: Simon Glass <sjg@chromium.org> |
#
41575d8e |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename auto_alloc_size members to be shorter This construct is quite long-winded. In earlier days it made some sense since auto-allocation was a strange concept. But with driver model now used pretty universally, we can shorten this to 'auto'. This reduces verbosity and makes it easier to read. Coincidentally it also ensures that every declaration is on one line, thus making dtoc's job easier. Signed-off-by: Simon Glass <sjg@chromium.org> |
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> |
#
b0b13f41 |
|
20-May-2020 |
Tom Rini <trini@konsulko.com> |
Merge https://gitlab.denx.de/u-boot/custodians/u-boot-fsl-qoriq - Add DM_ETH support for lx2160aqds, ls2080aqds, ls1088aqds - QSI related fixes on ls1012a, ls2080a, ls1046a, ls1088a, ls1043a based platforms - Bug-fixes/updtaes related to ls1046afrwy, fsl-mc, msi-map property
|
#
9b2e892e |
|
04-May-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: minor fix in DM ETH support Bus callback functions for read/write/reset need to be set only for DM_ETH, moving endif a bit lower. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com> |
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org> |
#
f7ae49fc |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop log.h from common header Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org> |
#
e6f6f9e6 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop part.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org> |
#
6eb32a03 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: add DM ETH support Probe the FMan MACs based on the device tree while retaining the legacy code/functionality. One notable change introduced here is that, for DM_ETH, the name of the interfaces is corrected to the fmX-macY format, that avoids the referral to the MAC block names which were incorrect for FMan v3 devices (i.e. DTSEC, TGEC) and had weird formatting (i.e. FM1@DTSEC6, FM1@TGEC1). The legacy code is left unchanged in this respect. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com> |
#
1c710187 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: separate receive buffer free code Move the receive buffer free code in a separate function. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com> |
#
8313cb02 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: change init_phy() param Change the init_phy() parameter to simplify the code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com> |
#
83d290c5 |
|
06-May-2018 |
Tom Rini <trini@konsulko.com> |
SPDX: Convert all of our single license tags to Linux Kernel style When U-Boot started using SPDX tags we were among the early adopters and there weren't a lot of other examples to borrow from. So we picked the area of the file that usually had a full license text and replaced it with an appropriate SPDX-License-Identifier: entry. Since then, the Linux Kernel has adopted SPDX tags and they place it as the very first line in a file (except where shebangs are used, then it's second line) and with slightly different comment styles than us. In part due to community overlap, in part due to better tag visibility and in part for other minor reasons, switch over to that style. This commit changes all instances where we have a single declared license in the tag as both the before and after are identical in tag contents. There's also a few places where I found we did not have a tag and have introduced one. Signed-off-by: Tom Rini <trini@konsulko.com> |
#
bead0880 |
|
14-Nov-2016 |
shaohui xie <shaohui.xie@nxp.com> |
net: fman: fix 2.5G SGMII settings The settings for 2.5G SGMII are wrong, which the 2.5G case is missed in set_if_mode(), and the serdes PCS configuration are wrong, this patch uses the correct settings took from Linux. Signed-off-by: Shaohui Xie <Shaohui.Xie@nxp.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com> |
#
bc24611c |
|
26-Oct-2015 |
Shaohui Xie <Shaohui.Xie@freescale.com> |
net/fm: Add QSGMII PCS init QSGMII PCS needed to be programmed same as SGMII PCS, and there are four ports in QSGMII PCS, port 0, 1, 2, 3, all the four ports shared port 0's MDIO controller, so when programming port 0, we continue to program other three ports. Signed-off-by: Shaohui Xie <Shaohui.Xie@freescale.com> Signed-off-by: Mingkai Hu <Mingkai.Hu@freescale.com> Signed-off-by: Gong Qianyu <Qianyu.Gong@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com> |
#
8225b2fd |
|
26-Oct-2015 |
Shaohui Xie <Shaohui.Xie@freescale.com> |
net: Move some header files to include/ The fsl_dtsec.h & fsl_tgec.h & fsl_fman.h can be shared on both ARM and PPC, move it out of ppc to include/, and change the path in drivers accordingly. Signed-off-by: Shaohui Xie <Shaohui.Xie@freescale.com> Signed-off-by: Gong Qianyu <Qianyu.Gong@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com> |
#
29d8c814 |
|
26-Oct-2015 |
Shaohui Xie <Shaohui.Xie@freescale.com> |
net: fm: bug fix when CONFIG_PHYLIB not defined codes related to phylib operations should be wrapped by CONFIG_PHYLIB. Signed-off-by: Shaohui Xie <Shaohui.Xie@freescale.com> Signed-off-by: Gong Qianyu <Qianyu.Gong@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com> |
#
0f2cb9f5 |
|
26-Oct-2015 |
Hou Zhiqiang <B48286@freescale.com> |
net/fm: Make the return value logic consistent with convention In convention, the '0' is a normal return value indicating there isn't an error. While some functions of FMan IM driver treat '0' as an error return value. Signed-off-by: Hou Zhiqiang <B48286@freescale.com> Signed-off-by: Gong Qianyu <Qianyu.Gong@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com> |
#
9fc29db1 |
|
26-Oct-2015 |
Hou Zhiqiang <B48286@freescale.com> |
net/fm: Add support for 64-bit platforms The FMan IM driver is developed for 32-bit platfroms and isn't friendly to 64-bit platforms, so do the minimal refactor: 1. Refine the MURAM management and access. 2. Correct the initialization and operations for QDs and BDs. Signed-off-by: Hou Zhiqiang <B48286@freescale.com> Signed-off-by: Gong Qianyu <Qianyu.Gong@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com> |
#
648bde6d |
|
26-Oct-2015 |
Hou Zhiqiang <B48286@freescale.com> |
net/fm: Fix the endian issue to support both endianness platforms The Frame Manager(FMan) is a big-endian peripheral, so the registers, internal MURAM and BDs, which are allocated in main memory and used to communication between core and FMan, should be accessed in big-endian. The big-endian platforms can access them directly as the code implemented so far, while for the little-endian platforms it need to swap the byte-order. Signed-off-by: Hou Zhiqiang <B48286@freescale.com> Signed-off-by: Shaohui Xie <Shaohui.Xie@freescale.com> Signed-off-by: Mingkai Hu <Mingkai.Hu@freescale.com> Signed-off-by: Gong Qianyu <Qianyu.Gong@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com> |
#
466f775e |
|
10-Jul-2015 |
Daniel Inderbitzin <daniel.inderbitzin@crypto.ch> |
qoriq eth.c bugfix: handle received corrupted frames correctly The rxbd is not correctly handled in case of a frame physical error (FPE) or frame size error (FSE). The rxbd must be cleared and advanced in case of an error to avoid receive stall. Signed-off-by: Daniel Inderbitzin <daniel.inderbitzin@gmail.com> |
#
cd348efa |
|
20-Mar-2015 |
Shaohui Xie <Shaohui.Xie@freescale.com> |
net/memac_phy: reuse driver for little endian SoCs The memac for PHY management on little endian SoCs is similar on big endian SoCs, so we modify the driver by using I/O accessor function to handle the endianness, so the driver can be reused on little endian SoCs, we introduce CONFIG_SYS_MEMAC_LITTLE_ENDIAN for little endian SoCs, if the CONFIG_SYS_MEMAC_LITTLE_ENDIAN is defined, the I/O access is little endian, if not, the I/O access is big endian. Move fsl_memac.h out of powerpc include. Signed-off-by: Shaohui Xie <Shaohui.Xie@freescale.com> Signed-off-by: York Sun <yorksun@freescale.com> |
#
1fd92db8 |
|
08-Apr-2015 |
Joe Hershberger <joe.hershberger@ni.com> |
net: cosmetic: Fix var naming net <-> eth drivers Update the naming convention used in the network stack functions and variables that Ethernet drivers use to interact with it. This cleans up the temporary hacks that were added to this interface along with the DM support. This patch has a few remaining checkpatch.pl failures that would be out of the scope of this patch to fix (drivers that are in gross violation of checkpatch.pl). Signed-off-by: Joe Hershberger <joe.hershberger@ni.com> Acked-by: Simon Glass <sjg@chromium.org> |
#
6798c324 |
|
12-Jan-2015 |
Codrin Ciubotariu <codrin.ciubotariu@freescale.com> |
net/fm: Fix error when FMAN MAC has no PHY U-boot assumes that all FMAN ports have a PHY. Some SoCs (like T1040) have fixed links. This means that the ports are connected MAC to MAc and there is no Ethernet PHY attatched. This patch initializes a FMAN MAC even if it doesn't have a PHY attached. Signed-off-by: Codrin Ciubotariu <codrin.ciubotariu@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com> |
#
cc19c25e |
|
24-Nov-2014 |
Shengzhou Liu <Shengzhou.Liu@freescale.com> |
net/fman: update 10GEC to fit new SoC fm_standard_init() initializes each 10G port by FM_TGEC_INFO_INITIALIZER. but it needs different implementation of FM_TGEC_INFO_INITIALIZER on different SoCs. on SoCs earlier(e.g. T4240, T2080), the notation between 10GEC and MAC as below: 10GEC1->MAC9, 10GEC2->MAC10, 10GEC3->MAC1, 10GEC4->MAC2 on SoCs later(e.g. T1024, etc), the notation between 10GEC and MAC as below: 10GEC1->MAC1, 10GEC2->MAC2 so we introduce CONFIG_FSL_FM_10GEC_REGULAR_NOTATION to fit the new SoCs on which 10GEC enumeration is consistent with MAC enumeration. Signed-off-by: Shengzhou Liu <Shengzhou.Liu@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com> |
#
c35f8693 |
|
23-Oct-2014 |
Shengzhou Liu <Shengzhou.Liu@freescale.com> |
net/fm: add 2.5G SGMII support As auto-negotiation is not supported for 2.5G SGMII, we need to add a new type PHY_INTERFACE_MODE_SGMII_2500 to differentiate SGMII-1G and SGMII-2.5G with different setting for auto-negotiation. Signed-off-by: Shaohui Xie <Shaohui.Xie@freescale.com> Signed-off-by: Shengzhou Liu <Shengzhou.Liu@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com> |
#
82a55c1e |
|
22-Nov-2013 |
Shengzhou Liu <Shengzhou.Liu@freescale.com> |
net/fman: Add support for 10GEC3 and 10GEC4 There are more than two 10GEC in single FMAN in some SoCs(e.g. T2080). This patch adds support for 10GEC3 and 10GEC4. Signed-off-by: Shengzhou Liu <Shengzhou.Liu@freescale.com> |
#
1c68d01e |
|
19-Aug-2013 |
Shaohui Xie <Shaohui.Xie@freescale.com> |
powerpc/t4240: add QSGMII interface support Also some fix for QSGMII. 1. fix QSGMII configure of Serdes2. 2. fix PHY address of QSGMII MAC9 & MAC10 for each FMAN. 3. fix dtb for QSGMII interface. Signed-off-by: Shaohui Xie <Shaohui.Xie@freescale.com> Acked-by: York Sun <yorksun@freescale.com> |
#
1a459660 |
|
08-Jul-2013 |
Wolfgang Denk <wd@denx.de> |
Add GPL-2.0+ SPDX-License-Identifier to source files Signed-off-by: Wolfgang Denk <wd@denx.de> [trini: Fixup common/cmd_io.c] Signed-off-by: Tom Rini <trini@ti.com> |
#
944b6ccf |
|
25-Mar-2013 |
Shaohui Xie <Shaohui.Xie@freescale.com> |
Fman/t4240: some fix for 10G XAUI 1. fix 10G mac offset by plus 8; 2. add second 10G port info for FM1 & FM2 when init ethernet info; 3. fix 10G lanes name to match lane protocol table; Signed-off-by: Shaohui Xie <Shaohui.Xie@freescale.com> Signed-off-by: Roy Zang <tie-fei.zang@freescale.com> Signed-off-by: Andy Fleming <afleming@freescale.com> |
#
960d70c6 |
|
29-Oct-2012 |
Kim Phillips <kim.phillips@freescale.com> |
drivers/net/: sparse fixes phy.c:46:5: warning: symbol 'genphy_config_advert' was not declared. Should it be static? phy.c:121:5: warning: symbol 'genphy_setup_forced' was not declared. Should it be static? phy.c:468:5: warning: symbol 'phy_probe' was not declared. Should it be static? phy.c:491:19: warning: symbol 'get_phy_driver' was not declared. Should it be static? phy.c:508:19: warning: symbol 'phy_device_create' was not declared. Should it be static? phy.c:552:5: warning: symbol 'get_phy_id' was not declared. Should it be static? phy.c:584:19: warning: symbol 'get_phy_device' was not declared. Should it be sta vitesse.c:126:5: warning: symbol 'vsc8601_config' was not declared. Should it be static? vsc7385.c:33:5: warning: symbol 'vsc7385_upload_firmware' was not declared. Should it be static? tgec_phy.c:33:5: warning: symbol 'tgec_mdio_write' was not declared. Should it be static? tgec_phy.c:75:5: warning: symbol 'tgec_mdio_read' was not declared. Should it be static? tgec_phy.c:117:5: warning: symbol 'tgec_mdio_reset' was not declared. Should it be static? eth.c:48:6: warning: symbol 'dtsec_configure_serdes' was not declared. Should it be static? p4080.c:26:5: warning: symbol 'port_to_devdisr' was not declared. Should it be static? Signed-off-by: Kim Phillips <kim.phillips@freescale.com> |
#
1f3bd3e2 |
|
11-Oct-2012 |
Shaohui Xie <Shaohui.Xie@freescale.com> |
powerpc/fm: fix TBI PHY address settings TBI PHY address (TBIPA) register is set in general frame manager phy init funciton dtsec_init_phy() in drivers/net/fm/eth.c, and it is supposed to set TBIPA on FM1@DTSEC1 in case of FM1@DTSEC1 isn't used directly, which provides MDIO for other ports. So following code is wrong in case of FM2, which has a different mac base. struct dtsec *regs = (struct dtsec *)fm_eth->mac->base; /* Assign a Physical address to the TBI */ out_be32(®s->tbipa, CONFIG_SYS_TBIPA_VALUE); Signed-off-by: Shaohui Xie <Shaohui.Xie@freescale.com> Signed-off-by: Andy Fleming <afleming@freescale.com> |
#
111fd19e |
|
08-Oct-2012 |
Roy Zang <tie-fei.zang@freescale.com> |
fm/mEMAC: add mEMAC frame work The multirate ethernet media access controller (mEMAC) interfaces to 10Gbps and below Ethernet/IEEE 802.3 networks via either RGMII/RMII interfaces or XAUI/XFI/SGMII/QSGMII using the high-speed SerDes interface. Signed-off-by: Sandeep Singh <Sandeep@freescale.com> Signed-off-by: Poonam Aggrwal <poonam.aggrwal@freescale.com> Signed-off-by: Roy Zang <tie-fei.zang@freescale.com> Signed-off-by: Andy Fleming <afleming@freescale.com> |
#
11af8d65 |
|
09-Jul-2012 |
Timur Tabi <timur@freescale.com> |
net: abort network initialization if the PHY driver fails Now that phy_startup() can return an actual error code, check for that error code and abort network initialization if the PHY fails. Signed-off-by: Timur Tabi <timur@freescale.com> Acked-by: Nobuhiro Iwamamatsu <nobuhiro.iwamatsu.yj@renesas.com> (sh_eth part) Acked-by: Stephan Linz <linz@li-pro.net> (Xilinx part, xilinx_axi_emac and xilinx_ll_temac) Reviewed-by: Marek Vasut <marex@denx.de> (FEC part) |
#
e9df2018 |
|
22-May-2012 |
Joe Hershberger <joe.hershberger@ni.com> |
drivers/net/fm/eth.c: Fix compile warning Fix this: eth.c: In function 'fm_eth_initialize': eth.c:651:12: warning: assignment from incompatible pointer type Signed-off-by: Joe Hershberger <joe.hershberger@ni.com> |
#
30381716 |
|
04-Oct-2011 |
Timur Tabi <timur@freescale.com> |
powerpc/85xx: fix null pointer dereference when init the SGMII TBI PHY Function dtsec_configure_serdes() needs to know where the TBI PHY registers are in order to configure SGMII for proper SerDes operation. During SGMII initialzation, fm_eth_init_mac() passing NULL for 'phyregs' when it called init_dtsec(), because it was believed that phyregs was not used. In fact, it is used by dtsec_configure_serdes() to configure the TBI PHY registers. We also need to define the PHY registers in struct fm_mdio. Signed-off-by: Timur Tabi <timur@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
#
c916d7c9 |
|
13-Apr-2011 |
Kumar Gala <galak@kernel.crashing.org> |
powerpc/85xx: Add support for FMan ethernet in Independent mode The Frame Manager (FMan) on QorIQ SoCs with DPAA (datapath acceleration architecture) is the ethernet contoller block. Normally it is utilized via Queue Manager (Qman) and Buffer Manager (Bman). However for boot usage the FMan supports a mode similar to QE or CPM ethernet collers called Independent mode. Additionally the FMan block supports multiple 1g and 10g interfaces as a single entity in the system rather than each controller being managed uniquely. This means we have to initialize all of Fman regardless of the number of interfaces we utilize. Different SoCs support different combinations of the number of FMan as well as the number of 1g & 10g interfaces support per Fman. We add support for the following SoCs: * P1023 - 1 Fman, 2x1g * P4080 - 2 Fman, each Fman has 4x1g and 1x10g * P204x/P3041/P5020 - 1 Fman, 5x1g, 1x10g Signed-off-by: Dave Liu <daveliu@freescale.com> Signed-off-by: Andy Fleming <afleming@freescale.com> Signed-off-by: Timur Tabi <timur@freescale.com> Signed-off-by: Roy Zang <tie-fei.zang@freescale.com> Signed-off-by: Dai Haruki <dai.haruki@freescale.com> Signed-off-by: Kim Phillips <kim.phillips@freescale.com> Signed-off-by: Ioana Radulescu <ruxandra.radulescu@freescale.com> Signed-off-by: Lei Xu <B33228@freescale.com> Signed-off-by: Mingkai Hu <Mingkai.hu@freescale.com> Signed-off-by: Scott Wood <scottwood@freescale.com> Signed-off-by: Shaohui Xie <b21989@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
#
7c2d5d16 |
|
18-Sep-2021 |
Vladimir Oltean <vladimir.oltean@nxp.com> |
net: freescale: replace usage of phy-mode = "sgmii-2500" with "2500base-x" After the discussion here: https://lore.kernel.org/netdev/20210603143453.if7hgifupx5k433b@pali/ which resulted in this patch: https://patchwork.kernel.org/project/netdevbpf/patch/20210704134325.24842-1-pali@kernel.org/ and many other discussions before it, notably: https://patchwork.kernel.org/project/linux-arm-kernel/patch/1512016235-15909-1-git-send-email-Bhaskar.Upadhaya@nxp.com/ it became apparent that nobody really knows what "SGMII 2500" is. Certainly, Freescale/NXP hardware engineers name this protocol "SGMII 2500" in the reference manuals, but the PCS devices do not support any "SGMII" specific features when operating at the speed of 2500 Mbps, no in-band autoneg and no speed change via symbol replication . So that leaves a fixed speed of 2500 Mbps using a coding of 8b/10b with a SERDES lane frequency of 3.125 GHz. In fact, "SGMII 2500 without in-band autoneg and at a fixed speed" is indistinguishable from "2500base-x without in-band autoneg", which is precisely what these NXP devices support. So it just appears that "SGMII 2500" is an unclear name with no clear definition that stuck. As such, in the Linux kernel, the drivers which use this SERDES protocol use the 2500base-x phy-mode. This patch converts U-Boot to use 2500base-x too, or at least, as much as it can. Note that I would have really liked to delete PHY_INTERFACE_MODE_SGMII_2500 completely, but the mvpp2 driver seems to even distinguish between SGMII 2500 and 2500base-X. Namely, it enables in-band autoneg for one but not the other, and forces flow control for one but not the other. This goes back to the idea that maybe 2500base-X is a fiber protocol and SGMII-2500 is an MII protocol (connects a MAC to a PHY such as Aquantia), but the two are practically indistinguishable through everything except use case. NXP devices can support both use cases through an identical configuration, for example RX flow control can be unconditionally enabled in order to support rate adaptation performed by an Aquantia PHY. At least I can find no indication in online documents published by Cisco which would point towards "SGMII-2500" being an actual standard with an actual definition, so I cannot say "yes, NXP devices support it". Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Ramon Fried <rfried.dev@gmail.com> |
#
3e184877 |
|
12-Jun-2021 |
Hou Zhiqiang <Zhiqiang.Hou@nxp.com> |
Fix a memory leak issue in the RX port initialization. Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> Reviewed-by: Ramon Fried <rfried.dev@gmail.com> |
#
f10643cf |
|
19-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: core: Access device ofnode through functions At present ofnode is present in the device even if it is never used. With of-platdata this field is not used, so can be removed. In preparation for this, change the access to go through inline functions. Signed-off-by: Simon Glass <sjg@chromium.org> |
#
0fd3d911 |
|
22-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: Use access methods for dev/uclass private data Most drivers use these access methods but a few do not. Update them. In some cases the access is not permitted, so mark those with a FIXME tag for the maintainer to check. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Pratyush Yadav <p.yadav@ti.com> |
#
c69cda25 |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename dev_get_platdata() to dev_get_plat() Rename this to be consistent with the change from 'platdata'. Signed-off-by: Simon Glass <sjg@chromium.org> |
#
caa4daa2 |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename 'platdata' variables to just 'plat' We use 'priv' for private data but often use 'platdata' for platform data. We can't really use 'pdata' since that is ambiguous (it could mean private or platform data). Rename some of the latter variables to end with 'plat' for consistency. Signed-off-by: Simon Glass <sjg@chromium.org> |
#
41575d8e |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename auto_alloc_size members to be shorter This construct is quite long-winded. In earlier days it made some sense since auto-allocation was a strange concept. But with driver model now used pretty universally, we can shorten this to 'auto'. This reduces verbosity and makes it easier to read. Coincidentally it also ensures that every declaration is on one line, thus making dtoc's job easier. Signed-off-by: Simon Glass <sjg@chromium.org> |
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> |
#
b0b13f41 |
|
20-May-2020 |
Tom Rini <trini@konsulko.com> |
Merge https://gitlab.denx.de/u-boot/custodians/u-boot-fsl-qoriq - Add DM_ETH support for lx2160aqds, ls2080aqds, ls1088aqds - QSI related fixes on ls1012a, ls2080a, ls1046a, ls1088a, ls1043a based platforms - Bug-fixes/updtaes related to ls1046afrwy, fsl-mc, msi-map property
|
#
9b2e892e |
|
04-May-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: minor fix in DM ETH support Bus callback functions for read/write/reset need to be set only for DM_ETH, moving endif a bit lower. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com> |
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org> |
#
f7ae49fc |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop log.h from common header Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org> |
#
e6f6f9e6 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop part.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org> |
#
6eb32a03 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: add DM ETH support Probe the FMan MACs based on the device tree while retaining the legacy code/functionality. One notable change introduced here is that, for DM_ETH, the name of the interfaces is corrected to the fmX-macY format, that avoids the referral to the MAC block names which were incorrect for FMan v3 devices (i.e. DTSEC, TGEC) and had weird formatting (i.e. FM1@DTSEC6, FM1@TGEC1). The legacy code is left unchanged in this respect. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com> |
#
1c710187 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: separate receive buffer free code Move the receive buffer free code in a separate function. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com> |
#
8313cb02 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: change init_phy() param Change the init_phy() parameter to simplify the code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com> |
#
83d290c5 |
|
06-May-2018 |
Tom Rini <trini@konsulko.com> |
SPDX: Convert all of our single license tags to Linux Kernel style When U-Boot started using SPDX tags we were among the early adopters and there weren't a lot of other examples to borrow from. So we picked the area of the file that usually had a full license text and replaced it with an appropriate SPDX-License-Identifier: entry. Since then, the Linux Kernel has adopted SPDX tags and they place it as the very first line in a file (except where shebangs are used, then it's second line) and with slightly different comment styles than us. In part due to community overlap, in part due to better tag visibility and in part for other minor reasons, switch over to that style. This commit changes all instances where we have a single declared license in the tag as both the before and after are identical in tag contents. There's also a few places where I found we did not have a tag and have introduced one. Signed-off-by: Tom Rini <trini@konsulko.com> |
#
bead0880 |
|
14-Nov-2016 |
shaohui xie <shaohui.xie@nxp.com> |
net: fman: fix 2.5G SGMII settings The settings for 2.5G SGMII are wrong, which the 2.5G case is missed in set_if_mode(), and the serdes PCS configuration are wrong, this patch uses the correct settings took from Linux. Signed-off-by: Shaohui Xie <Shaohui.Xie@nxp.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com> |
#
bc24611c |
|
26-Oct-2015 |
Shaohui Xie <Shaohui.Xie@freescale.com> |
net/fm: Add QSGMII PCS init QSGMII PCS needed to be programmed same as SGMII PCS, and there are four ports in QSGMII PCS, port 0, 1, 2, 3, all the four ports shared port 0's MDIO controller, so when programming port 0, we continue to program other three ports. Signed-off-by: Shaohui Xie <Shaohui.Xie@freescale.com> Signed-off-by: Mingkai Hu <Mingkai.Hu@freescale.com> Signed-off-by: Gong Qianyu <Qianyu.Gong@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com> |
#
8225b2fd |
|
26-Oct-2015 |
Shaohui Xie <Shaohui.Xie@freescale.com> |
net: Move some header files to include/ The fsl_dtsec.h & fsl_tgec.h & fsl_fman.h can be shared on both ARM and PPC, move it out of ppc to include/, and change the path in drivers accordingly. Signed-off-by: Shaohui Xie <Shaohui.Xie@freescale.com> Signed-off-by: Gong Qianyu <Qianyu.Gong@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com> |
#
29d8c814 |
|
26-Oct-2015 |
Shaohui Xie <Shaohui.Xie@freescale.com> |
net: fm: bug fix when CONFIG_PHYLIB not defined codes related to phylib operations should be wrapped by CONFIG_PHYLIB. Signed-off-by: Shaohui Xie <Shaohui.Xie@freescale.com> Signed-off-by: Gong Qianyu <Qianyu.Gong@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com> |
#
0f2cb9f5 |
|
26-Oct-2015 |
Hou Zhiqiang <B48286@freescale.com> |
net/fm: Make the return value logic consistent with convention In convention, the '0' is a normal return value indicating there isn't an error. While some functions of FMan IM driver treat '0' as an error return value. Signed-off-by: Hou Zhiqiang <B48286@freescale.com> Signed-off-by: Gong Qianyu <Qianyu.Gong@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com> |
#
9fc29db1 |
|
26-Oct-2015 |
Hou Zhiqiang <B48286@freescale.com> |
net/fm: Add support for 64-bit platforms The FMan IM driver is developed for 32-bit platfroms and isn't friendly to 64-bit platforms, so do the minimal refactor: 1. Refine the MURAM management and access. 2. Correct the initialization and operations for QDs and BDs. Signed-off-by: Hou Zhiqiang <B48286@freescale.com> Signed-off-by: Gong Qianyu <Qianyu.Gong@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com> |
#
648bde6d |
|
26-Oct-2015 |
Hou Zhiqiang <B48286@freescale.com> |
net/fm: Fix the endian issue to support both endianness platforms The Frame Manager(FMan) is a big-endian peripheral, so the registers, internal MURAM and BDs, which are allocated in main memory and used to communication between core and FMan, should be accessed in big-endian. The big-endian platforms can access them directly as the code implemented so far, while for the little-endian platforms it need to swap the byte-order. Signed-off-by: Hou Zhiqiang <B48286@freescale.com> Signed-off-by: Shaohui Xie <Shaohui.Xie@freescale.com> Signed-off-by: Mingkai Hu <Mingkai.Hu@freescale.com> Signed-off-by: Gong Qianyu <Qianyu.Gong@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com> |
#
466f775e |
|
10-Jul-2015 |
Daniel Inderbitzin <daniel.inderbitzin@crypto.ch> |
qoriq eth.c bugfix: handle received corrupted frames correctly The rxbd is not correctly handled in case of a frame physical error (FPE) or frame size error (FSE). The rxbd must be cleared and advanced in case of an error to avoid receive stall. Signed-off-by: Daniel Inderbitzin <daniel.inderbitzin@gmail.com> |
#
cd348efa |
|
20-Mar-2015 |
Shaohui Xie <Shaohui.Xie@freescale.com> |
net/memac_phy: reuse driver for little endian SoCs The memac for PHY management on little endian SoCs is similar on big endian SoCs, so we modify the driver by using I/O accessor function to handle the endianness, so the driver can be reused on little endian SoCs, we introduce CONFIG_SYS_MEMAC_LITTLE_ENDIAN for little endian SoCs, if the CONFIG_SYS_MEMAC_LITTLE_ENDIAN is defined, the I/O access is little endian, if not, the I/O access is big endian. Move fsl_memac.h out of powerpc include. Signed-off-by: Shaohui Xie <Shaohui.Xie@freescale.com> Signed-off-by: York Sun <yorksun@freescale.com> |
#
1fd92db8 |
|
08-Apr-2015 |
Joe Hershberger <joe.hershberger@ni.com> |
net: cosmetic: Fix var naming net <-> eth drivers Update the naming convention used in the network stack functions and variables that Ethernet drivers use to interact with it. This cleans up the temporary hacks that were added to this interface along with the DM support. This patch has a few remaining checkpatch.pl failures that would be out of the scope of this patch to fix (drivers that are in gross violation of checkpatch.pl). Signed-off-by: Joe Hershberger <joe.hershberger@ni.com> Acked-by: Simon Glass <sjg@chromium.org> |
#
6798c324 |
|
12-Jan-2015 |
Codrin Ciubotariu <codrin.ciubotariu@freescale.com> |
net/fm: Fix error when FMAN MAC has no PHY U-boot assumes that all FMAN ports have a PHY. Some SoCs (like T1040) have fixed links. This means that the ports are connected MAC to MAc and there is no Ethernet PHY attatched. This patch initializes a FMAN MAC even if it doesn't have a PHY attached. Signed-off-by: Codrin Ciubotariu <codrin.ciubotariu@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com> |
#
cc19c25e |
|
24-Nov-2014 |
Shengzhou Liu <Shengzhou.Liu@freescale.com> |
net/fman: update 10GEC to fit new SoC fm_standard_init() initializes each 10G port by FM_TGEC_INFO_INITIALIZER. but it needs different implementation of FM_TGEC_INFO_INITIALIZER on different SoCs. on SoCs earlier(e.g. T4240, T2080), the notation between 10GEC and MAC as below: 10GEC1->MAC9, 10GEC2->MAC10, 10GEC3->MAC1, 10GEC4->MAC2 on SoCs later(e.g. T1024, etc), the notation between 10GEC and MAC as below: 10GEC1->MAC1, 10GEC2->MAC2 so we introduce CONFIG_FSL_FM_10GEC_REGULAR_NOTATION to fit the new SoCs on which 10GEC enumeration is consistent with MAC enumeration. Signed-off-by: Shengzhou Liu <Shengzhou.Liu@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com> |
#
c35f8693 |
|
23-Oct-2014 |
Shengzhou Liu <Shengzhou.Liu@freescale.com> |
net/fm: add 2.5G SGMII support As auto-negotiation is not supported for 2.5G SGMII, we need to add a new type PHY_INTERFACE_MODE_SGMII_2500 to differentiate SGMII-1G and SGMII-2.5G with different setting for auto-negotiation. Signed-off-by: Shaohui Xie <Shaohui.Xie@freescale.com> Signed-off-by: Shengzhou Liu <Shengzhou.Liu@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com> |
#
82a55c1e |
|
22-Nov-2013 |
Shengzhou Liu <Shengzhou.Liu@freescale.com> |
net/fman: Add support for 10GEC3 and 10GEC4 There are more than two 10GEC in single FMAN in some SoCs(e.g. T2080). This patch adds support for 10GEC3 and 10GEC4. Signed-off-by: Shengzhou Liu <Shengzhou.Liu@freescale.com> |
#
1c68d01e |
|
19-Aug-2013 |
Shaohui Xie <Shaohui.Xie@freescale.com> |
powerpc/t4240: add QSGMII interface support Also some fix for QSGMII. 1. fix QSGMII configure of Serdes2. 2. fix PHY address of QSGMII MAC9 & MAC10 for each FMAN. 3. fix dtb for QSGMII interface. Signed-off-by: Shaohui Xie <Shaohui.Xie@freescale.com> Acked-by: York Sun <yorksun@freescale.com> |
#
1a459660 |
|
08-Jul-2013 |
Wolfgang Denk <wd@denx.de> |
Add GPL-2.0+ SPDX-License-Identifier to source files Signed-off-by: Wolfgang Denk <wd@denx.de> [trini: Fixup common/cmd_io.c] Signed-off-by: Tom Rini <trini@ti.com> |
#
944b6ccf |
|
25-Mar-2013 |
Shaohui Xie <Shaohui.Xie@freescale.com> |
Fman/t4240: some fix for 10G XAUI 1. fix 10G mac offset by plus 8; 2. add second 10G port info for FM1 & FM2 when init ethernet info; 3. fix 10G lanes name to match lane protocol table; Signed-off-by: Shaohui Xie <Shaohui.Xie@freescale.com> Signed-off-by: Roy Zang <tie-fei.zang@freescale.com> Signed-off-by: Andy Fleming <afleming@freescale.com> |
#
960d70c6 |
|
29-Oct-2012 |
Kim Phillips <kim.phillips@freescale.com> |
drivers/net/: sparse fixes phy.c:46:5: warning: symbol 'genphy_config_advert' was not declared. Should it be static? phy.c:121:5: warning: symbol 'genphy_setup_forced' was not declared. Should it be static? phy.c:468:5: warning: symbol 'phy_probe' was not declared. Should it be static? phy.c:491:19: warning: symbol 'get_phy_driver' was not declared. Should it be static? phy.c:508:19: warning: symbol 'phy_device_create' was not declared. Should it be static? phy.c:552:5: warning: symbol 'get_phy_id' was not declared. Should it be static? phy.c:584:19: warning: symbol 'get_phy_device' was not declared. Should it be sta vitesse.c:126:5: warning: symbol 'vsc8601_config' was not declared. Should it be static? vsc7385.c:33:5: warning: symbol 'vsc7385_upload_firmware' was not declared. Should it be static? tgec_phy.c:33:5: warning: symbol 'tgec_mdio_write' was not declared. Should it be static? tgec_phy.c:75:5: warning: symbol 'tgec_mdio_read' was not declared. Should it be static? tgec_phy.c:117:5: warning: symbol 'tgec_mdio_reset' was not declared. Should it be static? eth.c:48:6: warning: symbol 'dtsec_configure_serdes' was not declared. Should it be static? p4080.c:26:5: warning: symbol 'port_to_devdisr' was not declared. Should it be static? Signed-off-by: Kim Phillips <kim.phillips@freescale.com> |
#
1f3bd3e2 |
|
11-Oct-2012 |
Shaohui Xie <Shaohui.Xie@freescale.com> |
powerpc/fm: fix TBI PHY address settings TBI PHY address (TBIPA) register is set in general frame manager phy init funciton dtsec_init_phy() in drivers/net/fm/eth.c, and it is supposed to set TBIPA on FM1@DTSEC1 in case of FM1@DTSEC1 isn't used directly, which provides MDIO for other ports. So following code is wrong in case of FM2, which has a different mac base. struct dtsec *regs = (struct dtsec *)fm_eth->mac->base; /* Assign a Physical address to the TBI */ out_be32(®s->tbipa, CONFIG_SYS_TBIPA_VALUE); Signed-off-by: Shaohui Xie <Shaohui.Xie@freescale.com> Signed-off-by: Andy Fleming <afleming@freescale.com> |
#
111fd19e |
|
08-Oct-2012 |
Roy Zang <tie-fei.zang@freescale.com> |
fm/mEMAC: add mEMAC frame work The multirate ethernet media access controller (mEMAC) interfaces to 10Gbps and below Ethernet/IEEE 802.3 networks via either RGMII/RMII interfaces or XAUI/XFI/SGMII/QSGMII using the high-speed SerDes interface. Signed-off-by: Sandeep Singh <Sandeep@freescale.com> Signed-off-by: Poonam Aggrwal <poonam.aggrwal@freescale.com> Signed-off-by: Roy Zang <tie-fei.zang@freescale.com> Signed-off-by: Andy Fleming <afleming@freescale.com> |
#
11af8d65 |
|
09-Jul-2012 |
Timur Tabi <timur@freescale.com> |
net: abort network initialization if the PHY driver fails Now that phy_startup() can return an actual error code, check for that error code and abort network initialization if the PHY fails. Signed-off-by: Timur Tabi <timur@freescale.com> Acked-by: Nobuhiro Iwamamatsu <nobuhiro.iwamatsu.yj@renesas.com> (sh_eth part) Acked-by: Stephan Linz <linz@li-pro.net> (Xilinx part, xilinx_axi_emac and xilinx_ll_temac) Reviewed-by: Marek Vasut <marex@denx.de> (FEC part) |
#
e9df2018 |
|
22-May-2012 |
Joe Hershberger <joe.hershberger@ni.com> |
drivers/net/fm/eth.c: Fix compile warning Fix this: eth.c: In function 'fm_eth_initialize': eth.c:651:12: warning: assignment from incompatible pointer type Signed-off-by: Joe Hershberger <joe.hershberger@ni.com> |
#
30381716 |
|
04-Oct-2011 |
Timur Tabi <timur@freescale.com> |
powerpc/85xx: fix null pointer dereference when init the SGMII TBI PHY Function dtsec_configure_serdes() needs to know where the TBI PHY registers are in order to configure SGMII for proper SerDes operation. During SGMII initialzation, fm_eth_init_mac() passing NULL for 'phyregs' when it called init_dtsec(), because it was believed that phyregs was not used. In fact, it is used by dtsec_configure_serdes() to configure the TBI PHY registers. We also need to define the PHY registers in struct fm_mdio. Signed-off-by: Timur Tabi <timur@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
#
c916d7c9 |
|
13-Apr-2011 |
Kumar Gala <galak@kernel.crashing.org> |
powerpc/85xx: Add support for FMan ethernet in Independent mode The Frame Manager (FMan) on QorIQ SoCs with DPAA (datapath acceleration architecture) is the ethernet contoller block. Normally it is utilized via Queue Manager (Qman) and Buffer Manager (Bman). However for boot usage the FMan supports a mode similar to QE or CPM ethernet collers called Independent mode. Additionally the FMan block supports multiple 1g and 10g interfaces as a single entity in the system rather than each controller being managed uniquely. This means we have to initialize all of Fman regardless of the number of interfaces we utilize. Different SoCs support different combinations of the number of FMan as well as the number of 1g & 10g interfaces support per Fman. We add support for the following SoCs: * P1023 - 1 Fman, 2x1g * P4080 - 2 Fman, each Fman has 4x1g and 1x10g * P204x/P3041/P5020 - 1 Fman, 5x1g, 1x10g Signed-off-by: Dave Liu <daveliu@freescale.com> Signed-off-by: Andy Fleming <afleming@freescale.com> Signed-off-by: Timur Tabi <timur@freescale.com> Signed-off-by: Roy Zang <tie-fei.zang@freescale.com> Signed-off-by: Dai Haruki <dai.haruki@freescale.com> Signed-off-by: Kim Phillips <kim.phillips@freescale.com> Signed-off-by: Ioana Radulescu <ruxandra.radulescu@freescale.com> Signed-off-by: Lei Xu <B33228@freescale.com> Signed-off-by: Mingkai Hu <Mingkai.hu@freescale.com> Signed-off-by: Scott Wood <scottwood@freescale.com> Signed-off-by: Shaohui Xie <b21989@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
#
3e184877 |
|
12-Jun-2021 |
Hou Zhiqiang <Zhiqiang.Hou@nxp.com> |
Fix a memory leak issue in the RX port initialization. Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> Reviewed-by: Ramon Fried <rfried.dev@gmail.com> |
#
f10643cf |
|
19-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: core: Access device ofnode through functions At present ofnode is present in the device even if it is never used. With of-platdata this field is not used, so can be removed. In preparation for this, change the access to go through inline functions. Signed-off-by: Simon Glass <sjg@chromium.org> |
#
0fd3d911 |
|
22-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: Use access methods for dev/uclass private data Most drivers use these access methods but a few do not. Update them. In some cases the access is not permitted, so mark those with a FIXME tag for the maintainer to check. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Pratyush Yadav <p.yadav@ti.com> |
#
c69cda25 |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename dev_get_platdata() to dev_get_plat() Rename this to be consistent with the change from 'platdata'. Signed-off-by: Simon Glass <sjg@chromium.org> |
#
caa4daa2 |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename 'platdata' variables to just 'plat' We use 'priv' for private data but often use 'platdata' for platform data. We can't really use 'pdata' since that is ambiguous (it could mean private or platform data). Rename some of the latter variables to end with 'plat' for consistency. Signed-off-by: Simon Glass <sjg@chromium.org> |
#
41575d8e |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename auto_alloc_size members to be shorter This construct is quite long-winded. In earlier days it made some sense since auto-allocation was a strange concept. But with driver model now used pretty universally, we can shorten this to 'auto'. This reduces verbosity and makes it easier to read. Coincidentally it also ensures that every declaration is on one line, thus making dtoc's job easier. Signed-off-by: Simon Glass <sjg@chromium.org> |
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> |
#
b0b13f41 |
|
20-May-2020 |
Tom Rini <trini@konsulko.com> |
Merge https://gitlab.denx.de/u-boot/custodians/u-boot-fsl-qoriq - Add DM_ETH support for lx2160aqds, ls2080aqds, ls1088aqds - QSI related fixes on ls1012a, ls2080a, ls1046a, ls1088a, ls1043a based platforms - Bug-fixes/updtaes related to ls1046afrwy, fsl-mc, msi-map property
|
#
9b2e892e |
|
04-May-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: minor fix in DM ETH support Bus callback functions for read/write/reset need to be set only for DM_ETH, moving endif a bit lower. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com> |
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org> |
#
f7ae49fc |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop log.h from common header Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org> |
#
e6f6f9e6 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop part.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org> |
#
6eb32a03 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: add DM ETH support Probe the FMan MACs based on the device tree while retaining the legacy code/functionality. One notable change introduced here is that, for DM_ETH, the name of the interfaces is corrected to the fmX-macY format, that avoids the referral to the MAC block names which were incorrect for FMan v3 devices (i.e. DTSEC, TGEC) and had weird formatting (i.e. FM1@DTSEC6, FM1@TGEC1). The legacy code is left unchanged in this respect. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com> |
#
1c710187 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: separate receive buffer free code Move the receive buffer free code in a separate function. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com> |
#
8313cb02 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: change init_phy() param Change the init_phy() parameter to simplify the code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com> |
#
83d290c5 |
|
06-May-2018 |
Tom Rini <trini@konsulko.com> |
SPDX: Convert all of our single license tags to Linux Kernel style When U-Boot started using SPDX tags we were among the early adopters and there weren't a lot of other examples to borrow from. So we picked the area of the file that usually had a full license text and replaced it with an appropriate SPDX-License-Identifier: entry. Since then, the Linux Kernel has adopted SPDX tags and they place it as the very first line in a file (except where shebangs are used, then it's second line) and with slightly different comment styles than us. In part due to community overlap, in part due to better tag visibility and in part for other minor reasons, switch over to that style. This commit changes all instances where we have a single declared license in the tag as both the before and after are identical in tag contents. There's also a few places where I found we did not have a tag and have introduced one. Signed-off-by: Tom Rini <trini@konsulko.com> |
#
bead0880 |
|
14-Nov-2016 |
shaohui xie <shaohui.xie@nxp.com> |
net: fman: fix 2.5G SGMII settings The settings for 2.5G SGMII are wrong, which the 2.5G case is missed in set_if_mode(), and the serdes PCS configuration are wrong, this patch uses the correct settings took from Linux. Signed-off-by: Shaohui Xie <Shaohui.Xie@nxp.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com> |
#
bc24611c |
|
26-Oct-2015 |
Shaohui Xie <Shaohui.Xie@freescale.com> |
net/fm: Add QSGMII PCS init QSGMII PCS needed to be programmed same as SGMII PCS, and there are four ports in QSGMII PCS, port 0, 1, 2, 3, all the four ports shared port 0's MDIO controller, so when programming port 0, we continue to program other three ports. Signed-off-by: Shaohui Xie <Shaohui.Xie@freescale.com> Signed-off-by: Mingkai Hu <Mingkai.Hu@freescale.com> Signed-off-by: Gong Qianyu <Qianyu.Gong@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com> |
#
8225b2fd |
|
26-Oct-2015 |
Shaohui Xie <Shaohui.Xie@freescale.com> |
net: Move some header files to include/ The fsl_dtsec.h & fsl_tgec.h & fsl_fman.h can be shared on both ARM and PPC, move it out of ppc to include/, and change the path in drivers accordingly. Signed-off-by: Shaohui Xie <Shaohui.Xie@freescale.com> Signed-off-by: Gong Qianyu <Qianyu.Gong@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com> |
#
29d8c814 |
|
26-Oct-2015 |
Shaohui Xie <Shaohui.Xie@freescale.com> |
net: fm: bug fix when CONFIG_PHYLIB not defined codes related to phylib operations should be wrapped by CONFIG_PHYLIB. Signed-off-by: Shaohui Xie <Shaohui.Xie@freescale.com> Signed-off-by: Gong Qianyu <Qianyu.Gong@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com> |
#
0f2cb9f5 |
|
26-Oct-2015 |
Hou Zhiqiang <B48286@freescale.com> |
net/fm: Make the return value logic consistent with convention In convention, the '0' is a normal return value indicating there isn't an error. While some functions of FMan IM driver treat '0' as an error return value. Signed-off-by: Hou Zhiqiang <B48286@freescale.com> Signed-off-by: Gong Qianyu <Qianyu.Gong@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com> |
#
9fc29db1 |
|
26-Oct-2015 |
Hou Zhiqiang <B48286@freescale.com> |
net/fm: Add support for 64-bit platforms The FMan IM driver is developed for 32-bit platfroms and isn't friendly to 64-bit platforms, so do the minimal refactor: 1. Refine the MURAM management and access. 2. Correct the initialization and operations for QDs and BDs. Signed-off-by: Hou Zhiqiang <B48286@freescale.com> Signed-off-by: Gong Qianyu <Qianyu.Gong@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com> |
#
648bde6d |
|
26-Oct-2015 |
Hou Zhiqiang <B48286@freescale.com> |
net/fm: Fix the endian issue to support both endianness platforms The Frame Manager(FMan) is a big-endian peripheral, so the registers, internal MURAM and BDs, which are allocated in main memory and used to communication between core and FMan, should be accessed in big-endian. The big-endian platforms can access them directly as the code implemented so far, while for the little-endian platforms it need to swap the byte-order. Signed-off-by: Hou Zhiqiang <B48286@freescale.com> Signed-off-by: Shaohui Xie <Shaohui.Xie@freescale.com> Signed-off-by: Mingkai Hu <Mingkai.Hu@freescale.com> Signed-off-by: Gong Qianyu <Qianyu.Gong@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com> |
#
466f775e |
|
10-Jul-2015 |
Daniel Inderbitzin <daniel.inderbitzin@crypto.ch> |
qoriq eth.c bugfix: handle received corrupted frames correctly The rxbd is not correctly handled in case of a frame physical error (FPE) or frame size error (FSE). The rxbd must be cleared and advanced in case of an error to avoid receive stall. Signed-off-by: Daniel Inderbitzin <daniel.inderbitzin@gmail.com> |
#
cd348efa |
|
20-Mar-2015 |
Shaohui Xie <Shaohui.Xie@freescale.com> |
net/memac_phy: reuse driver for little endian SoCs The memac for PHY management on little endian SoCs is similar on big endian SoCs, so we modify the driver by using I/O accessor function to handle the endianness, so the driver can be reused on little endian SoCs, we introduce CONFIG_SYS_MEMAC_LITTLE_ENDIAN for little endian SoCs, if the CONFIG_SYS_MEMAC_LITTLE_ENDIAN is defined, the I/O access is little endian, if not, the I/O access is big endian. Move fsl_memac.h out of powerpc include. Signed-off-by: Shaohui Xie <Shaohui.Xie@freescale.com> Signed-off-by: York Sun <yorksun@freescale.com> |
#
1fd92db8 |
|
08-Apr-2015 |
Joe Hershberger <joe.hershberger@ni.com> |
net: cosmetic: Fix var naming net <-> eth drivers Update the naming convention used in the network stack functions and variables that Ethernet drivers use to interact with it. This cleans up the temporary hacks that were added to this interface along with the DM support. This patch has a few remaining checkpatch.pl failures that would be out of the scope of this patch to fix (drivers that are in gross violation of checkpatch.pl). Signed-off-by: Joe Hershberger <joe.hershberger@ni.com> Acked-by: Simon Glass <sjg@chromium.org> |
#
6798c324 |
|
12-Jan-2015 |
Codrin Ciubotariu <codrin.ciubotariu@freescale.com> |
net/fm: Fix error when FMAN MAC has no PHY U-boot assumes that all FMAN ports have a PHY. Some SoCs (like T1040) have fixed links. This means that the ports are connected MAC to MAc and there is no Ethernet PHY attatched. This patch initializes a FMAN MAC even if it doesn't have a PHY attached. Signed-off-by: Codrin Ciubotariu <codrin.ciubotariu@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com> |
#
cc19c25e |
|
24-Nov-2014 |
Shengzhou Liu <Shengzhou.Liu@freescale.com> |
net/fman: update 10GEC to fit new SoC fm_standard_init() initializes each 10G port by FM_TGEC_INFO_INITIALIZER. but it needs different implementation of FM_TGEC_INFO_INITIALIZER on different SoCs. on SoCs earlier(e.g. T4240, T2080), the notation between 10GEC and MAC as below: 10GEC1->MAC9, 10GEC2->MAC10, 10GEC3->MAC1, 10GEC4->MAC2 on SoCs later(e.g. T1024, etc), the notation between 10GEC and MAC as below: 10GEC1->MAC1, 10GEC2->MAC2 so we introduce CONFIG_FSL_FM_10GEC_REGULAR_NOTATION to fit the new SoCs on which 10GEC enumeration is consistent with MAC enumeration. Signed-off-by: Shengzhou Liu <Shengzhou.Liu@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com> |
#
c35f8693 |
|
23-Oct-2014 |
Shengzhou Liu <Shengzhou.Liu@freescale.com> |
net/fm: add 2.5G SGMII support As auto-negotiation is not supported for 2.5G SGMII, we need to add a new type PHY_INTERFACE_MODE_SGMII_2500 to differentiate SGMII-1G and SGMII-2.5G with different setting for auto-negotiation. Signed-off-by: Shaohui Xie <Shaohui.Xie@freescale.com> Signed-off-by: Shengzhou Liu <Shengzhou.Liu@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com> |
#
82a55c1e |
|
22-Nov-2013 |
Shengzhou Liu <Shengzhou.Liu@freescale.com> |
net/fman: Add support for 10GEC3 and 10GEC4 There are more than two 10GEC in single FMAN in some SoCs(e.g. T2080). This patch adds support for 10GEC3 and 10GEC4. Signed-off-by: Shengzhou Liu <Shengzhou.Liu@freescale.com> |
#
1c68d01e |
|
19-Aug-2013 |
Shaohui Xie <Shaohui.Xie@freescale.com> |
powerpc/t4240: add QSGMII interface support Also some fix for QSGMII. 1. fix QSGMII configure of Serdes2. 2. fix PHY address of QSGMII MAC9 & MAC10 for each FMAN. 3. fix dtb for QSGMII interface. Signed-off-by: Shaohui Xie <Shaohui.Xie@freescale.com> Acked-by: York Sun <yorksun@freescale.com> |
#
1a459660 |
|
08-Jul-2013 |
Wolfgang Denk <wd@denx.de> |
Add GPL-2.0+ SPDX-License-Identifier to source files Signed-off-by: Wolfgang Denk <wd@denx.de> [trini: Fixup common/cmd_io.c] Signed-off-by: Tom Rini <trini@ti.com> |
#
944b6ccf |
|
25-Mar-2013 |
Shaohui Xie <Shaohui.Xie@freescale.com> |
Fman/t4240: some fix for 10G XAUI 1. fix 10G mac offset by plus 8; 2. add second 10G port info for FM1 & FM2 when init ethernet info; 3. fix 10G lanes name to match lane protocol table; Signed-off-by: Shaohui Xie <Shaohui.Xie@freescale.com> Signed-off-by: Roy Zang <tie-fei.zang@freescale.com> Signed-off-by: Andy Fleming <afleming@freescale.com> |
#
960d70c6 |
|
29-Oct-2012 |
Kim Phillips <kim.phillips@freescale.com> |
drivers/net/: sparse fixes phy.c:46:5: warning: symbol 'genphy_config_advert' was not declared. Should it be static? phy.c:121:5: warning: symbol 'genphy_setup_forced' was not declared. Should it be static? phy.c:468:5: warning: symbol 'phy_probe' was not declared. Should it be static? phy.c:491:19: warning: symbol 'get_phy_driver' was not declared. Should it be static? phy.c:508:19: warning: symbol 'phy_device_create' was not declared. Should it be static? phy.c:552:5: warning: symbol 'get_phy_id' was not declared. Should it be static? phy.c:584:19: warning: symbol 'get_phy_device' was not declared. Should it be sta vitesse.c:126:5: warning: symbol 'vsc8601_config' was not declared. Should it be static? vsc7385.c:33:5: warning: symbol 'vsc7385_upload_firmware' was not declared. Should it be static? tgec_phy.c:33:5: warning: symbol 'tgec_mdio_write' was not declared. Should it be static? tgec_phy.c:75:5: warning: symbol 'tgec_mdio_read' was not declared. Should it be static? tgec_phy.c:117:5: warning: symbol 'tgec_mdio_reset' was not declared. Should it be static? eth.c:48:6: warning: symbol 'dtsec_configure_serdes' was not declared. Should it be static? p4080.c:26:5: warning: symbol 'port_to_devdisr' was not declared. Should it be static? Signed-off-by: Kim Phillips <kim.phillips@freescale.com> |
#
1f3bd3e2 |
|
11-Oct-2012 |
Shaohui Xie <Shaohui.Xie@freescale.com> |
powerpc/fm: fix TBI PHY address settings TBI PHY address (TBIPA) register is set in general frame manager phy init funciton dtsec_init_phy() in drivers/net/fm/eth.c, and it is supposed to set TBIPA on FM1@DTSEC1 in case of FM1@DTSEC1 isn't used directly, which provides MDIO for other ports. So following code is wrong in case of FM2, which has a different mac base. struct dtsec *regs = (struct dtsec *)fm_eth->mac->base; /* Assign a Physical address to the TBI */ out_be32(®s->tbipa, CONFIG_SYS_TBIPA_VALUE); Signed-off-by: Shaohui Xie <Shaohui.Xie@freescale.com> Signed-off-by: Andy Fleming <afleming@freescale.com> |
#
111fd19e |
|
08-Oct-2012 |
Roy Zang <tie-fei.zang@freescale.com> |
fm/mEMAC: add mEMAC frame work The multirate ethernet media access controller (mEMAC) interfaces to 10Gbps and below Ethernet/IEEE 802.3 networks via either RGMII/RMII interfaces or XAUI/XFI/SGMII/QSGMII using the high-speed SerDes interface. Signed-off-by: Sandeep Singh <Sandeep@freescale.com> Signed-off-by: Poonam Aggrwal <poonam.aggrwal@freescale.com> Signed-off-by: Roy Zang <tie-fei.zang@freescale.com> Signed-off-by: Andy Fleming <afleming@freescale.com> |
#
11af8d65 |
|
09-Jul-2012 |
Timur Tabi <timur@freescale.com> |
net: abort network initialization if the PHY driver fails Now that phy_startup() can return an actual error code, check for that error code and abort network initialization if the PHY fails. Signed-off-by: Timur Tabi <timur@freescale.com> Acked-by: Nobuhiro Iwamamatsu <nobuhiro.iwamatsu.yj@renesas.com> (sh_eth part) Acked-by: Stephan Linz <linz@li-pro.net> (Xilinx part, xilinx_axi_emac and xilinx_ll_temac) Reviewed-by: Marek Vasut <marex@denx.de> (FEC part) |
#
e9df2018 |
|
22-May-2012 |
Joe Hershberger <joe.hershberger@ni.com> |
drivers/net/fm/eth.c: Fix compile warning Fix this: eth.c: In function 'fm_eth_initialize': eth.c:651:12: warning: assignment from incompatible pointer type Signed-off-by: Joe Hershberger <joe.hershberger@ni.com> |
#
30381716 |
|
04-Oct-2011 |
Timur Tabi <timur@freescale.com> |
powerpc/85xx: fix null pointer dereference when init the SGMII TBI PHY Function dtsec_configure_serdes() needs to know where the TBI PHY registers are in order to configure SGMII for proper SerDes operation. During SGMII initialzation, fm_eth_init_mac() passing NULL for 'phyregs' when it called init_dtsec(), because it was believed that phyregs was not used. In fact, it is used by dtsec_configure_serdes() to configure the TBI PHY registers. We also need to define the PHY registers in struct fm_mdio. Signed-off-by: Timur Tabi <timur@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
#
c916d7c9 |
|
13-Apr-2011 |
Kumar Gala <galak@kernel.crashing.org> |
powerpc/85xx: Add support for FMan ethernet in Independent mode The Frame Manager (FMan) on QorIQ SoCs with DPAA (datapath acceleration architecture) is the ethernet contoller block. Normally it is utilized via Queue Manager (Qman) and Buffer Manager (Bman). However for boot usage the FMan supports a mode similar to QE or CPM ethernet collers called Independent mode. Additionally the FMan block supports multiple 1g and 10g interfaces as a single entity in the system rather than each controller being managed uniquely. This means we have to initialize all of Fman regardless of the number of interfaces we utilize. Different SoCs support different combinations of the number of FMan as well as the number of 1g & 10g interfaces support per Fman. We add support for the following SoCs: * P1023 - 1 Fman, 2x1g * P4080 - 2 Fman, each Fman has 4x1g and 1x10g * P204x/P3041/P5020 - 1 Fman, 5x1g, 1x10g Signed-off-by: Dave Liu <daveliu@freescale.com> Signed-off-by: Andy Fleming <afleming@freescale.com> Signed-off-by: Timur Tabi <timur@freescale.com> Signed-off-by: Roy Zang <tie-fei.zang@freescale.com> Signed-off-by: Dai Haruki <dai.haruki@freescale.com> Signed-off-by: Kim Phillips <kim.phillips@freescale.com> Signed-off-by: Ioana Radulescu <ruxandra.radulescu@freescale.com> Signed-off-by: Lei Xu <B33228@freescale.com> Signed-off-by: Mingkai Hu <Mingkai.hu@freescale.com> Signed-off-by: Scott Wood <scottwood@freescale.com> Signed-off-by: Shaohui Xie <b21989@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
#
f10643cf |
|
19-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: core: Access device ofnode through functions At present ofnode is present in the device even if it is never used. With of-platdata this field is not used, so can be removed. In preparation for this, change the access to go through inline functions. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
0fd3d911 |
|
22-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: Use access methods for dev/uclass private data Most drivers use these access methods but a few do not. Update them. In some cases the access is not permitted, so mark those with a FIXME tag for the maintainer to check. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Pratyush Yadav <p.yadav@ti.com>
|
#
c69cda25 |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename dev_get_platdata() to dev_get_plat() Rename this to be consistent with the change from 'platdata'. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
caa4daa2 |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename 'platdata' variables to just 'plat' We use 'priv' for private data but often use 'platdata' for platform data. We can't really use 'pdata' since that is ambiguous (it could mean private or platform data). Rename some of the latter variables to end with 'plat' for consistency. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
41575d8e |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename auto_alloc_size members to be shorter This construct is quite long-winded. In earlier days it made some sense since auto-allocation was a strange concept. But with driver model now used pretty universally, we can shorten this to 'auto'. This reduces verbosity and makes it easier to read. Coincidentally it also ensures that every declaration is on one line, thus making dtoc's job easier. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
9b2e892e |
|
04-May-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: minor fix in DM ETH support Bus callback functions for read/write/reset need to be set only for DM_ETH, moving endif a bit lower. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f7ae49fc |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop log.h from common header Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e6f6f9e6 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop part.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
6eb32a03 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: add DM ETH support Probe the FMan MACs based on the device tree while retaining the legacy code/functionality. One notable change introduced here is that, for DM_ETH, the name of the interfaces is corrected to the fmX-macY format, that avoids the referral to the MAC block names which were incorrect for FMan v3 devices (i.e. DTSEC, TGEC) and had weird formatting (i.e. FM1@DTSEC6, FM1@TGEC1). The legacy code is left unchanged in this respect. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
1c710187 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: separate receive buffer free code Move the receive buffer free code in a separate function. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
8313cb02 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: change init_phy() param Change the init_phy() parameter to simplify the code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
f10643cf |
|
19-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: core: Access device ofnode through functions At present ofnode is present in the device even if it is never used. With of-platdata this field is not used, so can be removed. In preparation for this, change the access to go through inline functions. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
0fd3d911 |
|
22-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: Use access methods for dev/uclass private data Most drivers use these access methods but a few do not. Update them. In some cases the access is not permitted, so mark those with a FIXME tag for the maintainer to check. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Pratyush Yadav <p.yadav@ti.com>
|
#
c69cda25 |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename dev_get_platdata() to dev_get_plat() Rename this to be consistent with the change from 'platdata'. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
caa4daa2 |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename 'platdata' variables to just 'plat' We use 'priv' for private data but often use 'platdata' for platform data. We can't really use 'pdata' since that is ambiguous (it could mean private or platform data). Rename some of the latter variables to end with 'plat' for consistency. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
41575d8e |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename auto_alloc_size members to be shorter This construct is quite long-winded. In earlier days it made some sense since auto-allocation was a strange concept. But with driver model now used pretty universally, we can shorten this to 'auto'. This reduces verbosity and makes it easier to read. Coincidentally it also ensures that every declaration is on one line, thus making dtoc's job easier. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
9b2e892e |
|
04-May-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: minor fix in DM ETH support Bus callback functions for read/write/reset need to be set only for DM_ETH, moving endif a bit lower. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f7ae49fc |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop log.h from common header Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e6f6f9e6 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop part.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
6eb32a03 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: add DM ETH support Probe the FMan MACs based on the device tree while retaining the legacy code/functionality. One notable change introduced here is that, for DM_ETH, the name of the interfaces is corrected to the fmX-macY format, that avoids the referral to the MAC block names which were incorrect for FMan v3 devices (i.e. DTSEC, TGEC) and had weird formatting (i.e. FM1@DTSEC6, FM1@TGEC1). The legacy code is left unchanged in this respect. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
1c710187 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: separate receive buffer free code Move the receive buffer free code in a separate function. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
8313cb02 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: change init_phy() param Change the init_phy() parameter to simplify the code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
f10643cf |
|
19-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: core: Access device ofnode through functions At present ofnode is present in the device even if it is never used. With of-platdata this field is not used, so can be removed. In preparation for this, change the access to go through inline functions. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
0fd3d911 |
|
22-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: Use access methods for dev/uclass private data Most drivers use these access methods but a few do not. Update them. In some cases the access is not permitted, so mark those with a FIXME tag for the maintainer to check. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Pratyush Yadav <p.yadav@ti.com>
|
#
c69cda25 |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename dev_get_platdata() to dev_get_plat() Rename this to be consistent with the change from 'platdata'. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
caa4daa2 |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename 'platdata' variables to just 'plat' We use 'priv' for private data but often use 'platdata' for platform data. We can't really use 'pdata' since that is ambiguous (it could mean private or platform data). Rename some of the latter variables to end with 'plat' for consistency. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
41575d8e |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename auto_alloc_size members to be shorter This construct is quite long-winded. In earlier days it made some sense since auto-allocation was a strange concept. But with driver model now used pretty universally, we can shorten this to 'auto'. This reduces verbosity and makes it easier to read. Coincidentally it also ensures that every declaration is on one line, thus making dtoc's job easier. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
9b2e892e |
|
04-May-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: minor fix in DM ETH support Bus callback functions for read/write/reset need to be set only for DM_ETH, moving endif a bit lower. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f7ae49fc |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop log.h from common header Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e6f6f9e6 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop part.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
6eb32a03 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: add DM ETH support Probe the FMan MACs based on the device tree while retaining the legacy code/functionality. One notable change introduced here is that, for DM_ETH, the name of the interfaces is corrected to the fmX-macY format, that avoids the referral to the MAC block names which were incorrect for FMan v3 devices (i.e. DTSEC, TGEC) and had weird formatting (i.e. FM1@DTSEC6, FM1@TGEC1). The legacy code is left unchanged in this respect. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
1c710187 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: separate receive buffer free code Move the receive buffer free code in a separate function. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
8313cb02 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: change init_phy() param Change the init_phy() parameter to simplify the code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
f10643cf |
|
19-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: core: Access device ofnode through functions At present ofnode is present in the device even if it is never used. With of-platdata this field is not used, so can be removed. In preparation for this, change the access to go through inline functions. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
0fd3d911 |
|
22-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: Use access methods for dev/uclass private data Most drivers use these access methods but a few do not. Update them. In some cases the access is not permitted, so mark those with a FIXME tag for the maintainer to check. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Pratyush Yadav <p.yadav@ti.com>
|
#
c69cda25 |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename dev_get_platdata() to dev_get_plat() Rename this to be consistent with the change from 'platdata'. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
caa4daa2 |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename 'platdata' variables to just 'plat' We use 'priv' for private data but often use 'platdata' for platform data. We can't really use 'pdata' since that is ambiguous (it could mean private or platform data). Rename some of the latter variables to end with 'plat' for consistency. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
41575d8e |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename auto_alloc_size members to be shorter This construct is quite long-winded. In earlier days it made some sense since auto-allocation was a strange concept. But with driver model now used pretty universally, we can shorten this to 'auto'. This reduces verbosity and makes it easier to read. Coincidentally it also ensures that every declaration is on one line, thus making dtoc's job easier. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
9b2e892e |
|
04-May-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: minor fix in DM ETH support Bus callback functions for read/write/reset need to be set only for DM_ETH, moving endif a bit lower. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f7ae49fc |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop log.h from common header Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e6f6f9e6 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop part.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
6eb32a03 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: add DM ETH support Probe the FMan MACs based on the device tree while retaining the legacy code/functionality. One notable change introduced here is that, for DM_ETH, the name of the interfaces is corrected to the fmX-macY format, that avoids the referral to the MAC block names which were incorrect for FMan v3 devices (i.e. DTSEC, TGEC) and had weird formatting (i.e. FM1@DTSEC6, FM1@TGEC1). The legacy code is left unchanged in this respect. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
1c710187 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: separate receive buffer free code Move the receive buffer free code in a separate function. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
8313cb02 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: change init_phy() param Change the init_phy() parameter to simplify the code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
f10643cf |
|
19-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: core: Access device ofnode through functions At present ofnode is present in the device even if it is never used. With of-platdata this field is not used, so can be removed. In preparation for this, change the access to go through inline functions. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
0fd3d911 |
|
22-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: Use access methods for dev/uclass private data Most drivers use these access methods but a few do not. Update them. In some cases the access is not permitted, so mark those with a FIXME tag for the maintainer to check. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Pratyush Yadav <p.yadav@ti.com>
|
#
c69cda25 |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename dev_get_platdata() to dev_get_plat() Rename this to be consistent with the change from 'platdata'. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
caa4daa2 |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename 'platdata' variables to just 'plat' We use 'priv' for private data but often use 'platdata' for platform data. We can't really use 'pdata' since that is ambiguous (it could mean private or platform data). Rename some of the latter variables to end with 'plat' for consistency. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
41575d8e |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename auto_alloc_size members to be shorter This construct is quite long-winded. In earlier days it made some sense since auto-allocation was a strange concept. But with driver model now used pretty universally, we can shorten this to 'auto'. This reduces verbosity and makes it easier to read. Coincidentally it also ensures that every declaration is on one line, thus making dtoc's job easier. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
9b2e892e |
|
04-May-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: minor fix in DM ETH support Bus callback functions for read/write/reset need to be set only for DM_ETH, moving endif a bit lower. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f7ae49fc |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop log.h from common header Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e6f6f9e6 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop part.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
6eb32a03 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: add DM ETH support Probe the FMan MACs based on the device tree while retaining the legacy code/functionality. One notable change introduced here is that, for DM_ETH, the name of the interfaces is corrected to the fmX-macY format, that avoids the referral to the MAC block names which were incorrect for FMan v3 devices (i.e. DTSEC, TGEC) and had weird formatting (i.e. FM1@DTSEC6, FM1@TGEC1). The legacy code is left unchanged in this respect. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
1c710187 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: separate receive buffer free code Move the receive buffer free code in a separate function. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
8313cb02 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: change init_phy() param Change the init_phy() parameter to simplify the code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
f10643cf |
|
19-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: core: Access device ofnode through functions At present ofnode is present in the device even if it is never used. With of-platdata this field is not used, so can be removed. In preparation for this, change the access to go through inline functions. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
0fd3d911 |
|
22-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: Use access methods for dev/uclass private data Most drivers use these access methods but a few do not. Update them. In some cases the access is not permitted, so mark those with a FIXME tag for the maintainer to check. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Pratyush Yadav <p.yadav@ti.com>
|
#
c69cda25 |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename dev_get_platdata() to dev_get_plat() Rename this to be consistent with the change from 'platdata'. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
caa4daa2 |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename 'platdata' variables to just 'plat' We use 'priv' for private data but often use 'platdata' for platform data. We can't really use 'pdata' since that is ambiguous (it could mean private or platform data). Rename some of the latter variables to end with 'plat' for consistency. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
41575d8e |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename auto_alloc_size members to be shorter This construct is quite long-winded. In earlier days it made some sense since auto-allocation was a strange concept. But with driver model now used pretty universally, we can shorten this to 'auto'. This reduces verbosity and makes it easier to read. Coincidentally it also ensures that every declaration is on one line, thus making dtoc's job easier. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
9b2e892e |
|
04-May-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: minor fix in DM ETH support Bus callback functions for read/write/reset need to be set only for DM_ETH, moving endif a bit lower. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f7ae49fc |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop log.h from common header Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e6f6f9e6 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop part.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
6eb32a03 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: add DM ETH support Probe the FMan MACs based on the device tree while retaining the legacy code/functionality. One notable change introduced here is that, for DM_ETH, the name of the interfaces is corrected to the fmX-macY format, that avoids the referral to the MAC block names which were incorrect for FMan v3 devices (i.e. DTSEC, TGEC) and had weird formatting (i.e. FM1@DTSEC6, FM1@TGEC1). The legacy code is left unchanged in this respect. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
1c710187 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: separate receive buffer free code Move the receive buffer free code in a separate function. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
8313cb02 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: change init_phy() param Change the init_phy() parameter to simplify the code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
f10643cf |
|
19-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: core: Access device ofnode through functions At present ofnode is present in the device even if it is never used. With of-platdata this field is not used, so can be removed. In preparation for this, change the access to go through inline functions. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
0fd3d911 |
|
22-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: Use access methods for dev/uclass private data Most drivers use these access methods but a few do not. Update them. In some cases the access is not permitted, so mark those with a FIXME tag for the maintainer to check. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Pratyush Yadav <p.yadav@ti.com>
|
#
c69cda25 |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename dev_get_platdata() to dev_get_plat() Rename this to be consistent with the change from 'platdata'. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
caa4daa2 |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename 'platdata' variables to just 'plat' We use 'priv' for private data but often use 'platdata' for platform data. We can't really use 'pdata' since that is ambiguous (it could mean private or platform data). Rename some of the latter variables to end with 'plat' for consistency. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
41575d8e |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename auto_alloc_size members to be shorter This construct is quite long-winded. In earlier days it made some sense since auto-allocation was a strange concept. But with driver model now used pretty universally, we can shorten this to 'auto'. This reduces verbosity and makes it easier to read. Coincidentally it also ensures that every declaration is on one line, thus making dtoc's job easier. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
9b2e892e |
|
04-May-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: minor fix in DM ETH support Bus callback functions for read/write/reset need to be set only for DM_ETH, moving endif a bit lower. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f7ae49fc |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop log.h from common header Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e6f6f9e6 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop part.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
6eb32a03 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: add DM ETH support Probe the FMan MACs based on the device tree while retaining the legacy code/functionality. One notable change introduced here is that, for DM_ETH, the name of the interfaces is corrected to the fmX-macY format, that avoids the referral to the MAC block names which were incorrect for FMan v3 devices (i.e. DTSEC, TGEC) and had weird formatting (i.e. FM1@DTSEC6, FM1@TGEC1). The legacy code is left unchanged in this respect. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
1c710187 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: separate receive buffer free code Move the receive buffer free code in a separate function. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
8313cb02 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: change init_phy() param Change the init_phy() parameter to simplify the code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
f10643cf |
|
19-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: core: Access device ofnode through functions At present ofnode is present in the device even if it is never used. With of-platdata this field is not used, so can be removed. In preparation for this, change the access to go through inline functions. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
0fd3d911 |
|
22-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: Use access methods for dev/uclass private data Most drivers use these access methods but a few do not. Update them. In some cases the access is not permitted, so mark those with a FIXME tag for the maintainer to check. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Pratyush Yadav <p.yadav@ti.com>
|
#
c69cda25 |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename dev_get_platdata() to dev_get_plat() Rename this to be consistent with the change from 'platdata'. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
caa4daa2 |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename 'platdata' variables to just 'plat' We use 'priv' for private data but often use 'platdata' for platform data. We can't really use 'pdata' since that is ambiguous (it could mean private or platform data). Rename some of the latter variables to end with 'plat' for consistency. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
41575d8e |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename auto_alloc_size members to be shorter This construct is quite long-winded. In earlier days it made some sense since auto-allocation was a strange concept. But with driver model now used pretty universally, we can shorten this to 'auto'. This reduces verbosity and makes it easier to read. Coincidentally it also ensures that every declaration is on one line, thus making dtoc's job easier. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
9b2e892e |
|
04-May-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: minor fix in DM ETH support Bus callback functions for read/write/reset need to be set only for DM_ETH, moving endif a bit lower. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f7ae49fc |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop log.h from common header Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e6f6f9e6 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop part.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
6eb32a03 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: add DM ETH support Probe the FMan MACs based on the device tree while retaining the legacy code/functionality. One notable change introduced here is that, for DM_ETH, the name of the interfaces is corrected to the fmX-macY format, that avoids the referral to the MAC block names which were incorrect for FMan v3 devices (i.e. DTSEC, TGEC) and had weird formatting (i.e. FM1@DTSEC6, FM1@TGEC1). The legacy code is left unchanged in this respect. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
1c710187 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: separate receive buffer free code Move the receive buffer free code in a separate function. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
8313cb02 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: change init_phy() param Change the init_phy() parameter to simplify the code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
f10643cf |
|
19-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: core: Access device ofnode through functions At present ofnode is present in the device even if it is never used. With of-platdata this field is not used, so can be removed. In preparation for this, change the access to go through inline functions. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
0fd3d911 |
|
22-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: Use access methods for dev/uclass private data Most drivers use these access methods but a few do not. Update them. In some cases the access is not permitted, so mark those with a FIXME tag for the maintainer to check. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Pratyush Yadav <p.yadav@ti.com>
|
#
c69cda25 |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename dev_get_platdata() to dev_get_plat() Rename this to be consistent with the change from 'platdata'. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
caa4daa2 |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename 'platdata' variables to just 'plat' We use 'priv' for private data but often use 'platdata' for platform data. We can't really use 'pdata' since that is ambiguous (it could mean private or platform data). Rename some of the latter variables to end with 'plat' for consistency. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
41575d8e |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename auto_alloc_size members to be shorter This construct is quite long-winded. In earlier days it made some sense since auto-allocation was a strange concept. But with driver model now used pretty universally, we can shorten this to 'auto'. This reduces verbosity and makes it easier to read. Coincidentally it also ensures that every declaration is on one line, thus making dtoc's job easier. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
9b2e892e |
|
04-May-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: minor fix in DM ETH support Bus callback functions for read/write/reset need to be set only for DM_ETH, moving endif a bit lower. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f7ae49fc |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop log.h from common header Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e6f6f9e6 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop part.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
6eb32a03 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: add DM ETH support Probe the FMan MACs based on the device tree while retaining the legacy code/functionality. One notable change introduced here is that, for DM_ETH, the name of the interfaces is corrected to the fmX-macY format, that avoids the referral to the MAC block names which were incorrect for FMan v3 devices (i.e. DTSEC, TGEC) and had weird formatting (i.e. FM1@DTSEC6, FM1@TGEC1). The legacy code is left unchanged in this respect. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
1c710187 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: separate receive buffer free code Move the receive buffer free code in a separate function. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
8313cb02 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: change init_phy() param Change the init_phy() parameter to simplify the code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
f10643cf |
|
19-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: core: Access device ofnode through functions At present ofnode is present in the device even if it is never used. With of-platdata this field is not used, so can be removed. In preparation for this, change the access to go through inline functions. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
0fd3d911 |
|
22-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: Use access methods for dev/uclass private data Most drivers use these access methods but a few do not. Update them. In some cases the access is not permitted, so mark those with a FIXME tag for the maintainer to check. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Pratyush Yadav <p.yadav@ti.com>
|
#
c69cda25 |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename dev_get_platdata() to dev_get_plat() Rename this to be consistent with the change from 'platdata'. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
caa4daa2 |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename 'platdata' variables to just 'plat' We use 'priv' for private data but often use 'platdata' for platform data. We can't really use 'pdata' since that is ambiguous (it could mean private or platform data). Rename some of the latter variables to end with 'plat' for consistency. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
41575d8e |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename auto_alloc_size members to be shorter This construct is quite long-winded. In earlier days it made some sense since auto-allocation was a strange concept. But with driver model now used pretty universally, we can shorten this to 'auto'. This reduces verbosity and makes it easier to read. Coincidentally it also ensures that every declaration is on one line, thus making dtoc's job easier. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
9b2e892e |
|
04-May-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: minor fix in DM ETH support Bus callback functions for read/write/reset need to be set only for DM_ETH, moving endif a bit lower. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f7ae49fc |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop log.h from common header Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e6f6f9e6 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop part.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
6eb32a03 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: add DM ETH support Probe the FMan MACs based on the device tree while retaining the legacy code/functionality. One notable change introduced here is that, for DM_ETH, the name of the interfaces is corrected to the fmX-macY format, that avoids the referral to the MAC block names which were incorrect for FMan v3 devices (i.e. DTSEC, TGEC) and had weird formatting (i.e. FM1@DTSEC6, FM1@TGEC1). The legacy code is left unchanged in this respect. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
1c710187 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: separate receive buffer free code Move the receive buffer free code in a separate function. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
8313cb02 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: change init_phy() param Change the init_phy() parameter to simplify the code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
f10643cf |
|
19-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: core: Access device ofnode through functions At present ofnode is present in the device even if it is never used. With of-platdata this field is not used, so can be removed. In preparation for this, change the access to go through inline functions. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
0fd3d911 |
|
22-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: Use access methods for dev/uclass private data Most drivers use these access methods but a few do not. Update them. In some cases the access is not permitted, so mark those with a FIXME tag for the maintainer to check. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Pratyush Yadav <p.yadav@ti.com>
|
#
c69cda25 |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename dev_get_platdata() to dev_get_plat() Rename this to be consistent with the change from 'platdata'. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
caa4daa2 |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename 'platdata' variables to just 'plat' We use 'priv' for private data but often use 'platdata' for platform data. We can't really use 'pdata' since that is ambiguous (it could mean private or platform data). Rename some of the latter variables to end with 'plat' for consistency. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
41575d8e |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename auto_alloc_size members to be shorter This construct is quite long-winded. In earlier days it made some sense since auto-allocation was a strange concept. But with driver model now used pretty universally, we can shorten this to 'auto'. This reduces verbosity and makes it easier to read. Coincidentally it also ensures that every declaration is on one line, thus making dtoc's job easier. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
9b2e892e |
|
04-May-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: minor fix in DM ETH support Bus callback functions for read/write/reset need to be set only for DM_ETH, moving endif a bit lower. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f7ae49fc |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop log.h from common header Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e6f6f9e6 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop part.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
6eb32a03 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: add DM ETH support Probe the FMan MACs based on the device tree while retaining the legacy code/functionality. One notable change introduced here is that, for DM_ETH, the name of the interfaces is corrected to the fmX-macY format, that avoids the referral to the MAC block names which were incorrect for FMan v3 devices (i.e. DTSEC, TGEC) and had weird formatting (i.e. FM1@DTSEC6, FM1@TGEC1). The legacy code is left unchanged in this respect. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
1c710187 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: separate receive buffer free code Move the receive buffer free code in a separate function. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
8313cb02 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: change init_phy() param Change the init_phy() parameter to simplify the code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
f10643cf |
|
19-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: core: Access device ofnode through functions At present ofnode is present in the device even if it is never used. With of-platdata this field is not used, so can be removed. In preparation for this, change the access to go through inline functions. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
0fd3d911 |
|
22-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: Use access methods for dev/uclass private data Most drivers use these access methods but a few do not. Update them. In some cases the access is not permitted, so mark those with a FIXME tag for the maintainer to check. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Pratyush Yadav <p.yadav@ti.com>
|
#
c69cda25 |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename dev_get_platdata() to dev_get_plat() Rename this to be consistent with the change from 'platdata'. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
caa4daa2 |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename 'platdata' variables to just 'plat' We use 'priv' for private data but often use 'platdata' for platform data. We can't really use 'pdata' since that is ambiguous (it could mean private or platform data). Rename some of the latter variables to end with 'plat' for consistency. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
41575d8e |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename auto_alloc_size members to be shorter This construct is quite long-winded. In earlier days it made some sense since auto-allocation was a strange concept. But with driver model now used pretty universally, we can shorten this to 'auto'. This reduces verbosity and makes it easier to read. Coincidentally it also ensures that every declaration is on one line, thus making dtoc's job easier. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
9b2e892e |
|
04-May-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: minor fix in DM ETH support Bus callback functions for read/write/reset need to be set only for DM_ETH, moving endif a bit lower. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f7ae49fc |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop log.h from common header Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e6f6f9e6 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop part.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
6eb32a03 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: add DM ETH support Probe the FMan MACs based on the device tree while retaining the legacy code/functionality. One notable change introduced here is that, for DM_ETH, the name of the interfaces is corrected to the fmX-macY format, that avoids the referral to the MAC block names which were incorrect for FMan v3 devices (i.e. DTSEC, TGEC) and had weird formatting (i.e. FM1@DTSEC6, FM1@TGEC1). The legacy code is left unchanged in this respect. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
1c710187 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: separate receive buffer free code Move the receive buffer free code in a separate function. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
8313cb02 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: change init_phy() param Change the init_phy() parameter to simplify the code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
f10643cf |
|
19-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: core: Access device ofnode through functions At present ofnode is present in the device even if it is never used. With of-platdata this field is not used, so can be removed. In preparation for this, change the access to go through inline functions. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
0fd3d911 |
|
22-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: Use access methods for dev/uclass private data Most drivers use these access methods but a few do not. Update them. In some cases the access is not permitted, so mark those with a FIXME tag for the maintainer to check. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Pratyush Yadav <p.yadav@ti.com>
|
#
c69cda25 |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename dev_get_platdata() to dev_get_plat() Rename this to be consistent with the change from 'platdata'. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
caa4daa2 |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename 'platdata' variables to just 'plat' We use 'priv' for private data but often use 'platdata' for platform data. We can't really use 'pdata' since that is ambiguous (it could mean private or platform data). Rename some of the latter variables to end with 'plat' for consistency. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
41575d8e |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename auto_alloc_size members to be shorter This construct is quite long-winded. In earlier days it made some sense since auto-allocation was a strange concept. But with driver model now used pretty universally, we can shorten this to 'auto'. This reduces verbosity and makes it easier to read. Coincidentally it also ensures that every declaration is on one line, thus making dtoc's job easier. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
9b2e892e |
|
04-May-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: minor fix in DM ETH support Bus callback functions for read/write/reset need to be set only for DM_ETH, moving endif a bit lower. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f7ae49fc |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop log.h from common header Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e6f6f9e6 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop part.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
6eb32a03 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: add DM ETH support Probe the FMan MACs based on the device tree while retaining the legacy code/functionality. One notable change introduced here is that, for DM_ETH, the name of the interfaces is corrected to the fmX-macY format, that avoids the referral to the MAC block names which were incorrect for FMan v3 devices (i.e. DTSEC, TGEC) and had weird formatting (i.e. FM1@DTSEC6, FM1@TGEC1). The legacy code is left unchanged in this respect. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
1c710187 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: separate receive buffer free code Move the receive buffer free code in a separate function. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
8313cb02 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: change init_phy() param Change the init_phy() parameter to simplify the code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
f10643cf |
|
19-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: core: Access device ofnode through functions At present ofnode is present in the device even if it is never used. With of-platdata this field is not used, so can be removed. In preparation for this, change the access to go through inline functions. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
0fd3d911 |
|
22-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: Use access methods for dev/uclass private data Most drivers use these access methods but a few do not. Update them. In some cases the access is not permitted, so mark those with a FIXME tag for the maintainer to check. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Pratyush Yadav <p.yadav@ti.com>
|
#
c69cda25 |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename dev_get_platdata() to dev_get_plat() Rename this to be consistent with the change from 'platdata'. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
caa4daa2 |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename 'platdata' variables to just 'plat' We use 'priv' for private data but often use 'platdata' for platform data. We can't really use 'pdata' since that is ambiguous (it could mean private or platform data). Rename some of the latter variables to end with 'plat' for consistency. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
41575d8e |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename auto_alloc_size members to be shorter This construct is quite long-winded. In earlier days it made some sense since auto-allocation was a strange concept. But with driver model now used pretty universally, we can shorten this to 'auto'. This reduces verbosity and makes it easier to read. Coincidentally it also ensures that every declaration is on one line, thus making dtoc's job easier. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
9b2e892e |
|
04-May-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: minor fix in DM ETH support Bus callback functions for read/write/reset need to be set only for DM_ETH, moving endif a bit lower. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f7ae49fc |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop log.h from common header Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e6f6f9e6 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop part.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
6eb32a03 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: add DM ETH support Probe the FMan MACs based on the device tree while retaining the legacy code/functionality. One notable change introduced here is that, for DM_ETH, the name of the interfaces is corrected to the fmX-macY format, that avoids the referral to the MAC block names which were incorrect for FMan v3 devices (i.e. DTSEC, TGEC) and had weird formatting (i.e. FM1@DTSEC6, FM1@TGEC1). The legacy code is left unchanged in this respect. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
1c710187 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: separate receive buffer free code Move the receive buffer free code in a separate function. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
8313cb02 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: change init_phy() param Change the init_phy() parameter to simplify the code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
f10643cf |
|
19-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: core: Access device ofnode through functions At present ofnode is present in the device even if it is never used. With of-platdata this field is not used, so can be removed. In preparation for this, change the access to go through inline functions. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
0fd3d911 |
|
22-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: Use access methods for dev/uclass private data Most drivers use these access methods but a few do not. Update them. In some cases the access is not permitted, so mark those with a FIXME tag for the maintainer to check. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Pratyush Yadav <p.yadav@ti.com>
|
#
c69cda25 |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename dev_get_platdata() to dev_get_plat() Rename this to be consistent with the change from 'platdata'. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
caa4daa2 |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename 'platdata' variables to just 'plat' We use 'priv' for private data but often use 'platdata' for platform data. We can't really use 'pdata' since that is ambiguous (it could mean private or platform data). Rename some of the latter variables to end with 'plat' for consistency. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
41575d8e |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename auto_alloc_size members to be shorter This construct is quite long-winded. In earlier days it made some sense since auto-allocation was a strange concept. But with driver model now used pretty universally, we can shorten this to 'auto'. This reduces verbosity and makes it easier to read. Coincidentally it also ensures that every declaration is on one line, thus making dtoc's job easier. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
9b2e892e |
|
04-May-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: minor fix in DM ETH support Bus callback functions for read/write/reset need to be set only for DM_ETH, moving endif a bit lower. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f7ae49fc |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop log.h from common header Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e6f6f9e6 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop part.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
6eb32a03 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: add DM ETH support Probe the FMan MACs based on the device tree while retaining the legacy code/functionality. One notable change introduced here is that, for DM_ETH, the name of the interfaces is corrected to the fmX-macY format, that avoids the referral to the MAC block names which were incorrect for FMan v3 devices (i.e. DTSEC, TGEC) and had weird formatting (i.e. FM1@DTSEC6, FM1@TGEC1). The legacy code is left unchanged in this respect. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
1c710187 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: separate receive buffer free code Move the receive buffer free code in a separate function. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
8313cb02 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: change init_phy() param Change the init_phy() parameter to simplify the code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
f10643cf |
|
19-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: core: Access device ofnode through functions At present ofnode is present in the device even if it is never used. With of-platdata this field is not used, so can be removed. In preparation for this, change the access to go through inline functions. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
0fd3d911 |
|
22-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: Use access methods for dev/uclass private data Most drivers use these access methods but a few do not. Update them. In some cases the access is not permitted, so mark those with a FIXME tag for the maintainer to check. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Pratyush Yadav <p.yadav@ti.com>
|
#
c69cda25 |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename dev_get_platdata() to dev_get_plat() Rename this to be consistent with the change from 'platdata'. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
caa4daa2 |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename 'platdata' variables to just 'plat' We use 'priv' for private data but often use 'platdata' for platform data. We can't really use 'pdata' since that is ambiguous (it could mean private or platform data). Rename some of the latter variables to end with 'plat' for consistency. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
41575d8e |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename auto_alloc_size members to be shorter This construct is quite long-winded. In earlier days it made some sense since auto-allocation was a strange concept. But with driver model now used pretty universally, we can shorten this to 'auto'. This reduces verbosity and makes it easier to read. Coincidentally it also ensures that every declaration is on one line, thus making dtoc's job easier. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
9b2e892e |
|
04-May-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: minor fix in DM ETH support Bus callback functions for read/write/reset need to be set only for DM_ETH, moving endif a bit lower. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f7ae49fc |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop log.h from common header Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e6f6f9e6 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop part.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
6eb32a03 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: add DM ETH support Probe the FMan MACs based on the device tree while retaining the legacy code/functionality. One notable change introduced here is that, for DM_ETH, the name of the interfaces is corrected to the fmX-macY format, that avoids the referral to the MAC block names which were incorrect for FMan v3 devices (i.e. DTSEC, TGEC) and had weird formatting (i.e. FM1@DTSEC6, FM1@TGEC1). The legacy code is left unchanged in this respect. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
1c710187 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: separate receive buffer free code Move the receive buffer free code in a separate function. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
8313cb02 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: change init_phy() param Change the init_phy() parameter to simplify the code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
f10643cf |
|
19-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: core: Access device ofnode through functions At present ofnode is present in the device even if it is never used. With of-platdata this field is not used, so can be removed. In preparation for this, change the access to go through inline functions. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
0fd3d911 |
|
22-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: Use access methods for dev/uclass private data Most drivers use these access methods but a few do not. Update them. In some cases the access is not permitted, so mark those with a FIXME tag for the maintainer to check. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Pratyush Yadav <p.yadav@ti.com>
|
#
c69cda25 |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename dev_get_platdata() to dev_get_plat() Rename this to be consistent with the change from 'platdata'. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
caa4daa2 |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename 'platdata' variables to just 'plat' We use 'priv' for private data but often use 'platdata' for platform data. We can't really use 'pdata' since that is ambiguous (it could mean private or platform data). Rename some of the latter variables to end with 'plat' for consistency. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
41575d8e |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename auto_alloc_size members to be shorter This construct is quite long-winded. In earlier days it made some sense since auto-allocation was a strange concept. But with driver model now used pretty universally, we can shorten this to 'auto'. This reduces verbosity and makes it easier to read. Coincidentally it also ensures that every declaration is on one line, thus making dtoc's job easier. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
9b2e892e |
|
04-May-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: minor fix in DM ETH support Bus callback functions for read/write/reset need to be set only for DM_ETH, moving endif a bit lower. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f7ae49fc |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop log.h from common header Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e6f6f9e6 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop part.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
6eb32a03 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: add DM ETH support Probe the FMan MACs based on the device tree while retaining the legacy code/functionality. One notable change introduced here is that, for DM_ETH, the name of the interfaces is corrected to the fmX-macY format, that avoids the referral to the MAC block names which were incorrect for FMan v3 devices (i.e. DTSEC, TGEC) and had weird formatting (i.e. FM1@DTSEC6, FM1@TGEC1). The legacy code is left unchanged in this respect. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
1c710187 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: separate receive buffer free code Move the receive buffer free code in a separate function. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
8313cb02 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: change init_phy() param Change the init_phy() parameter to simplify the code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
f10643cf |
|
19-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: core: Access device ofnode through functions At present ofnode is present in the device even if it is never used. With of-platdata this field is not used, so can be removed. In preparation for this, change the access to go through inline functions. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
0fd3d911 |
|
22-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: Use access methods for dev/uclass private data Most drivers use these access methods but a few do not. Update them. In some cases the access is not permitted, so mark those with a FIXME tag for the maintainer to check. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Pratyush Yadav <p.yadav@ti.com>
|
#
c69cda25 |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename dev_get_platdata() to dev_get_plat() Rename this to be consistent with the change from 'platdata'. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
caa4daa2 |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename 'platdata' variables to just 'plat' We use 'priv' for private data but often use 'platdata' for platform data. We can't really use 'pdata' since that is ambiguous (it could mean private or platform data). Rename some of the latter variables to end with 'plat' for consistency. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
41575d8e |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename auto_alloc_size members to be shorter This construct is quite long-winded. In earlier days it made some sense since auto-allocation was a strange concept. But with driver model now used pretty universally, we can shorten this to 'auto'. This reduces verbosity and makes it easier to read. Coincidentally it also ensures that every declaration is on one line, thus making dtoc's job easier. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
9b2e892e |
|
04-May-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: minor fix in DM ETH support Bus callback functions for read/write/reset need to be set only for DM_ETH, moving endif a bit lower. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f7ae49fc |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop log.h from common header Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e6f6f9e6 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop part.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
6eb32a03 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: add DM ETH support Probe the FMan MACs based on the device tree while retaining the legacy code/functionality. One notable change introduced here is that, for DM_ETH, the name of the interfaces is corrected to the fmX-macY format, that avoids the referral to the MAC block names which were incorrect for FMan v3 devices (i.e. DTSEC, TGEC) and had weird formatting (i.e. FM1@DTSEC6, FM1@TGEC1). The legacy code is left unchanged in this respect. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
1c710187 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: separate receive buffer free code Move the receive buffer free code in a separate function. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
8313cb02 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: change init_phy() param Change the init_phy() parameter to simplify the code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
f10643cf |
|
19-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: core: Access device ofnode through functions At present ofnode is present in the device even if it is never used. With of-platdata this field is not used, so can be removed. In preparation for this, change the access to go through inline functions. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
0fd3d911 |
|
22-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: Use access methods for dev/uclass private data Most drivers use these access methods but a few do not. Update them. In some cases the access is not permitted, so mark those with a FIXME tag for the maintainer to check. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Pratyush Yadav <p.yadav@ti.com>
|
#
c69cda25 |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename dev_get_platdata() to dev_get_plat() Rename this to be consistent with the change from 'platdata'. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
caa4daa2 |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename 'platdata' variables to just 'plat' We use 'priv' for private data but often use 'platdata' for platform data. We can't really use 'pdata' since that is ambiguous (it could mean private or platform data). Rename some of the latter variables to end with 'plat' for consistency. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
41575d8e |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename auto_alloc_size members to be shorter This construct is quite long-winded. In earlier days it made some sense since auto-allocation was a strange concept. But with driver model now used pretty universally, we can shorten this to 'auto'. This reduces verbosity and makes it easier to read. Coincidentally it also ensures that every declaration is on one line, thus making dtoc's job easier. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
9b2e892e |
|
04-May-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: minor fix in DM ETH support Bus callback functions for read/write/reset need to be set only for DM_ETH, moving endif a bit lower. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f7ae49fc |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop log.h from common header Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e6f6f9e6 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop part.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
6eb32a03 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: add DM ETH support Probe the FMan MACs based on the device tree while retaining the legacy code/functionality. One notable change introduced here is that, for DM_ETH, the name of the interfaces is corrected to the fmX-macY format, that avoids the referral to the MAC block names which were incorrect for FMan v3 devices (i.e. DTSEC, TGEC) and had weird formatting (i.e. FM1@DTSEC6, FM1@TGEC1). The legacy code is left unchanged in this respect. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
1c710187 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: separate receive buffer free code Move the receive buffer free code in a separate function. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
8313cb02 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: change init_phy() param Change the init_phy() parameter to simplify the code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
f10643cf |
|
19-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: core: Access device ofnode through functions At present ofnode is present in the device even if it is never used. With of-platdata this field is not used, so can be removed. In preparation for this, change the access to go through inline functions. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
0fd3d911 |
|
22-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: Use access methods for dev/uclass private data Most drivers use these access methods but a few do not. Update them. In some cases the access is not permitted, so mark those with a FIXME tag for the maintainer to check. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Pratyush Yadav <p.yadav@ti.com>
|
#
c69cda25 |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename dev_get_platdata() to dev_get_plat() Rename this to be consistent with the change from 'platdata'. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
caa4daa2 |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename 'platdata' variables to just 'plat' We use 'priv' for private data but often use 'platdata' for platform data. We can't really use 'pdata' since that is ambiguous (it could mean private or platform data). Rename some of the latter variables to end with 'plat' for consistency. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
41575d8e |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename auto_alloc_size members to be shorter This construct is quite long-winded. In earlier days it made some sense since auto-allocation was a strange concept. But with driver model now used pretty universally, we can shorten this to 'auto'. This reduces verbosity and makes it easier to read. Coincidentally it also ensures that every declaration is on one line, thus making dtoc's job easier. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
9b2e892e |
|
04-May-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: minor fix in DM ETH support Bus callback functions for read/write/reset need to be set only for DM_ETH, moving endif a bit lower. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f7ae49fc |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop log.h from common header Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e6f6f9e6 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop part.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
6eb32a03 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: add DM ETH support Probe the FMan MACs based on the device tree while retaining the legacy code/functionality. One notable change introduced here is that, for DM_ETH, the name of the interfaces is corrected to the fmX-macY format, that avoids the referral to the MAC block names which were incorrect for FMan v3 devices (i.e. DTSEC, TGEC) and had weird formatting (i.e. FM1@DTSEC6, FM1@TGEC1). The legacy code is left unchanged in this respect. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
1c710187 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: separate receive buffer free code Move the receive buffer free code in a separate function. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
8313cb02 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: change init_phy() param Change the init_phy() parameter to simplify the code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
f10643cf |
|
19-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: core: Access device ofnode through functions At present ofnode is present in the device even if it is never used. With of-platdata this field is not used, so can be removed. In preparation for this, change the access to go through inline functions. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
0fd3d911 |
|
22-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: Use access methods for dev/uclass private data Most drivers use these access methods but a few do not. Update them. In some cases the access is not permitted, so mark those with a FIXME tag for the maintainer to check. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Pratyush Yadav <p.yadav@ti.com>
|
#
c69cda25 |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename dev_get_platdata() to dev_get_plat() Rename this to be consistent with the change from 'platdata'. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
caa4daa2 |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename 'platdata' variables to just 'plat' We use 'priv' for private data but often use 'platdata' for platform data. We can't really use 'pdata' since that is ambiguous (it could mean private or platform data). Rename some of the latter variables to end with 'plat' for consistency. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
41575d8e |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename auto_alloc_size members to be shorter This construct is quite long-winded. In earlier days it made some sense since auto-allocation was a strange concept. But with driver model now used pretty universally, we can shorten this to 'auto'. This reduces verbosity and makes it easier to read. Coincidentally it also ensures that every declaration is on one line, thus making dtoc's job easier. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
9b2e892e |
|
04-May-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: minor fix in DM ETH support Bus callback functions for read/write/reset need to be set only for DM_ETH, moving endif a bit lower. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f7ae49fc |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop log.h from common header Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e6f6f9e6 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop part.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
6eb32a03 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: add DM ETH support Probe the FMan MACs based on the device tree while retaining the legacy code/functionality. One notable change introduced here is that, for DM_ETH, the name of the interfaces is corrected to the fmX-macY format, that avoids the referral to the MAC block names which were incorrect for FMan v3 devices (i.e. DTSEC, TGEC) and had weird formatting (i.e. FM1@DTSEC6, FM1@TGEC1). The legacy code is left unchanged in this respect. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
1c710187 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: separate receive buffer free code Move the receive buffer free code in a separate function. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
8313cb02 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: change init_phy() param Change the init_phy() parameter to simplify the code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
f10643cf |
|
19-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: core: Access device ofnode through functions At present ofnode is present in the device even if it is never used. With of-platdata this field is not used, so can be removed. In preparation for this, change the access to go through inline functions. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
0fd3d911 |
|
22-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: Use access methods for dev/uclass private data Most drivers use these access methods but a few do not. Update them. In some cases the access is not permitted, so mark those with a FIXME tag for the maintainer to check. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Pratyush Yadav <p.yadav@ti.com>
|
#
c69cda25 |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename dev_get_platdata() to dev_get_plat() Rename this to be consistent with the change from 'platdata'. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
caa4daa2 |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename 'platdata' variables to just 'plat' We use 'priv' for private data but often use 'platdata' for platform data. We can't really use 'pdata' since that is ambiguous (it could mean private or platform data). Rename some of the latter variables to end with 'plat' for consistency. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
41575d8e |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename auto_alloc_size members to be shorter This construct is quite long-winded. In earlier days it made some sense since auto-allocation was a strange concept. But with driver model now used pretty universally, we can shorten this to 'auto'. This reduces verbosity and makes it easier to read. Coincidentally it also ensures that every declaration is on one line, thus making dtoc's job easier. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
9b2e892e |
|
04-May-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: minor fix in DM ETH support Bus callback functions for read/write/reset need to be set only for DM_ETH, moving endif a bit lower. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f7ae49fc |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop log.h from common header Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e6f6f9e6 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop part.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
6eb32a03 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: add DM ETH support Probe the FMan MACs based on the device tree while retaining the legacy code/functionality. One notable change introduced here is that, for DM_ETH, the name of the interfaces is corrected to the fmX-macY format, that avoids the referral to the MAC block names which were incorrect for FMan v3 devices (i.e. DTSEC, TGEC) and had weird formatting (i.e. FM1@DTSEC6, FM1@TGEC1). The legacy code is left unchanged in this respect. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
1c710187 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: separate receive buffer free code Move the receive buffer free code in a separate function. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
8313cb02 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: change init_phy() param Change the init_phy() parameter to simplify the code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
f10643cf |
|
19-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: core: Access device ofnode through functions At present ofnode is present in the device even if it is never used. With of-platdata this field is not used, so can be removed. In preparation for this, change the access to go through inline functions. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
0fd3d911 |
|
22-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: Use access methods for dev/uclass private data Most drivers use these access methods but a few do not. Update them. In some cases the access is not permitted, so mark those with a FIXME tag for the maintainer to check. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Pratyush Yadav <p.yadav@ti.com>
|
#
c69cda25 |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename dev_get_platdata() to dev_get_plat() Rename this to be consistent with the change from 'platdata'. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
caa4daa2 |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename 'platdata' variables to just 'plat' We use 'priv' for private data but often use 'platdata' for platform data. We can't really use 'pdata' since that is ambiguous (it could mean private or platform data). Rename some of the latter variables to end with 'plat' for consistency. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
41575d8e |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename auto_alloc_size members to be shorter This construct is quite long-winded. In earlier days it made some sense since auto-allocation was a strange concept. But with driver model now used pretty universally, we can shorten this to 'auto'. This reduces verbosity and makes it easier to read. Coincidentally it also ensures that every declaration is on one line, thus making dtoc's job easier. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
9b2e892e |
|
04-May-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: minor fix in DM ETH support Bus callback functions for read/write/reset need to be set only for DM_ETH, moving endif a bit lower. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f7ae49fc |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop log.h from common header Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e6f6f9e6 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop part.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
6eb32a03 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: add DM ETH support Probe the FMan MACs based on the device tree while retaining the legacy code/functionality. One notable change introduced here is that, for DM_ETH, the name of the interfaces is corrected to the fmX-macY format, that avoids the referral to the MAC block names which were incorrect for FMan v3 devices (i.e. DTSEC, TGEC) and had weird formatting (i.e. FM1@DTSEC6, FM1@TGEC1). The legacy code is left unchanged in this respect. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
1c710187 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: separate receive buffer free code Move the receive buffer free code in a separate function. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
8313cb02 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: change init_phy() param Change the init_phy() parameter to simplify the code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
f10643cf |
|
19-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: core: Access device ofnode through functions At present ofnode is present in the device even if it is never used. With of-platdata this field is not used, so can be removed. In preparation for this, change the access to go through inline functions. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
0fd3d911 |
|
22-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: Use access methods for dev/uclass private data Most drivers use these access methods but a few do not. Update them. In some cases the access is not permitted, so mark those with a FIXME tag for the maintainer to check. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Pratyush Yadav <p.yadav@ti.com>
|
#
c69cda25 |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename dev_get_platdata() to dev_get_plat() Rename this to be consistent with the change from 'platdata'. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
caa4daa2 |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename 'platdata' variables to just 'plat' We use 'priv' for private data but often use 'platdata' for platform data. We can't really use 'pdata' since that is ambiguous (it could mean private or platform data). Rename some of the latter variables to end with 'plat' for consistency. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
41575d8e |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename auto_alloc_size members to be shorter This construct is quite long-winded. In earlier days it made some sense since auto-allocation was a strange concept. But with driver model now used pretty universally, we can shorten this to 'auto'. This reduces verbosity and makes it easier to read. Coincidentally it also ensures that every declaration is on one line, thus making dtoc's job easier. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
9b2e892e |
|
04-May-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: minor fix in DM ETH support Bus callback functions for read/write/reset need to be set only for DM_ETH, moving endif a bit lower. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f7ae49fc |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop log.h from common header Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e6f6f9e6 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop part.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
6eb32a03 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: add DM ETH support Probe the FMan MACs based on the device tree while retaining the legacy code/functionality. One notable change introduced here is that, for DM_ETH, the name of the interfaces is corrected to the fmX-macY format, that avoids the referral to the MAC block names which were incorrect for FMan v3 devices (i.e. DTSEC, TGEC) and had weird formatting (i.e. FM1@DTSEC6, FM1@TGEC1). The legacy code is left unchanged in this respect. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
1c710187 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: separate receive buffer free code Move the receive buffer free code in a separate function. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
8313cb02 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: change init_phy() param Change the init_phy() parameter to simplify the code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
f10643cf |
|
19-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: core: Access device ofnode through functions At present ofnode is present in the device even if it is never used. With of-platdata this field is not used, so can be removed. In preparation for this, change the access to go through inline functions. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
0fd3d911 |
|
22-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: Use access methods for dev/uclass private data Most drivers use these access methods but a few do not. Update them. In some cases the access is not permitted, so mark those with a FIXME tag for the maintainer to check. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Pratyush Yadav <p.yadav@ti.com>
|
#
c69cda25 |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename dev_get_platdata() to dev_get_plat() Rename this to be consistent with the change from 'platdata'. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
caa4daa2 |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename 'platdata' variables to just 'plat' We use 'priv' for private data but often use 'platdata' for platform data. We can't really use 'pdata' since that is ambiguous (it could mean private or platform data). Rename some of the latter variables to end with 'plat' for consistency. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
41575d8e |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename auto_alloc_size members to be shorter This construct is quite long-winded. In earlier days it made some sense since auto-allocation was a strange concept. But with driver model now used pretty universally, we can shorten this to 'auto'. This reduces verbosity and makes it easier to read. Coincidentally it also ensures that every declaration is on one line, thus making dtoc's job easier. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
9b2e892e |
|
04-May-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: minor fix in DM ETH support Bus callback functions for read/write/reset need to be set only for DM_ETH, moving endif a bit lower. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f7ae49fc |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop log.h from common header Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e6f6f9e6 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop part.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
6eb32a03 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: add DM ETH support Probe the FMan MACs based on the device tree while retaining the legacy code/functionality. One notable change introduced here is that, for DM_ETH, the name of the interfaces is corrected to the fmX-macY format, that avoids the referral to the MAC block names which were incorrect for FMan v3 devices (i.e. DTSEC, TGEC) and had weird formatting (i.e. FM1@DTSEC6, FM1@TGEC1). The legacy code is left unchanged in this respect. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
1c710187 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: separate receive buffer free code Move the receive buffer free code in a separate function. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
8313cb02 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: change init_phy() param Change the init_phy() parameter to simplify the code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
f10643cf |
|
19-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: core: Access device ofnode through functions At present ofnode is present in the device even if it is never used. With of-platdata this field is not used, so can be removed. In preparation for this, change the access to go through inline functions. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
0fd3d911 |
|
22-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: Use access methods for dev/uclass private data Most drivers use these access methods but a few do not. Update them. In some cases the access is not permitted, so mark those with a FIXME tag for the maintainer to check. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Pratyush Yadav <p.yadav@ti.com>
|
#
c69cda25 |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename dev_get_platdata() to dev_get_plat() Rename this to be consistent with the change from 'platdata'. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
caa4daa2 |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename 'platdata' variables to just 'plat' We use 'priv' for private data but often use 'platdata' for platform data. We can't really use 'pdata' since that is ambiguous (it could mean private or platform data). Rename some of the latter variables to end with 'plat' for consistency. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
41575d8e |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename auto_alloc_size members to be shorter This construct is quite long-winded. In earlier days it made some sense since auto-allocation was a strange concept. But with driver model now used pretty universally, we can shorten this to 'auto'. This reduces verbosity and makes it easier to read. Coincidentally it also ensures that every declaration is on one line, thus making dtoc's job easier. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
9b2e892e |
|
04-May-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: minor fix in DM ETH support Bus callback functions for read/write/reset need to be set only for DM_ETH, moving endif a bit lower. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f7ae49fc |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop log.h from common header Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e6f6f9e6 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop part.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
6eb32a03 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: add DM ETH support Probe the FMan MACs based on the device tree while retaining the legacy code/functionality. One notable change introduced here is that, for DM_ETH, the name of the interfaces is corrected to the fmX-macY format, that avoids the referral to the MAC block names which were incorrect for FMan v3 devices (i.e. DTSEC, TGEC) and had weird formatting (i.e. FM1@DTSEC6, FM1@TGEC1). The legacy code is left unchanged in this respect. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
1c710187 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: separate receive buffer free code Move the receive buffer free code in a separate function. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
8313cb02 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: change init_phy() param Change the init_phy() parameter to simplify the code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
f10643cf |
|
19-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: core: Access device ofnode through functions At present ofnode is present in the device even if it is never used. With of-platdata this field is not used, so can be removed. In preparation for this, change the access to go through inline functions. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
0fd3d911 |
|
22-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: Use access methods for dev/uclass private data Most drivers use these access methods but a few do not. Update them. In some cases the access is not permitted, so mark those with a FIXME tag for the maintainer to check. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Pratyush Yadav <p.yadav@ti.com>
|
#
c69cda25 |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename dev_get_platdata() to dev_get_plat() Rename this to be consistent with the change from 'platdata'. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
caa4daa2 |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename 'platdata' variables to just 'plat' We use 'priv' for private data but often use 'platdata' for platform data. We can't really use 'pdata' since that is ambiguous (it could mean private or platform data). Rename some of the latter variables to end with 'plat' for consistency. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
41575d8e |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename auto_alloc_size members to be shorter This construct is quite long-winded. In earlier days it made some sense since auto-allocation was a strange concept. But with driver model now used pretty universally, we can shorten this to 'auto'. This reduces verbosity and makes it easier to read. Coincidentally it also ensures that every declaration is on one line, thus making dtoc's job easier. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
9b2e892e |
|
04-May-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: minor fix in DM ETH support Bus callback functions for read/write/reset need to be set only for DM_ETH, moving endif a bit lower. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f7ae49fc |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop log.h from common header Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e6f6f9e6 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop part.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
6eb32a03 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: add DM ETH support Probe the FMan MACs based on the device tree while retaining the legacy code/functionality. One notable change introduced here is that, for DM_ETH, the name of the interfaces is corrected to the fmX-macY format, that avoids the referral to the MAC block names which were incorrect for FMan v3 devices (i.e. DTSEC, TGEC) and had weird formatting (i.e. FM1@DTSEC6, FM1@TGEC1). The legacy code is left unchanged in this respect. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
1c710187 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: separate receive buffer free code Move the receive buffer free code in a separate function. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
8313cb02 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: change init_phy() param Change the init_phy() parameter to simplify the code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
f10643cf |
|
19-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: core: Access device ofnode through functions At present ofnode is present in the device even if it is never used. With of-platdata this field is not used, so can be removed. In preparation for this, change the access to go through inline functions. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
0fd3d911 |
|
22-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: Use access methods for dev/uclass private data Most drivers use these access methods but a few do not. Update them. In some cases the access is not permitted, so mark those with a FIXME tag for the maintainer to check. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Pratyush Yadav <p.yadav@ti.com>
|
#
c69cda25 |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename dev_get_platdata() to dev_get_plat() Rename this to be consistent with the change from 'platdata'. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
caa4daa2 |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename 'platdata' variables to just 'plat' We use 'priv' for private data but often use 'platdata' for platform data. We can't really use 'pdata' since that is ambiguous (it could mean private or platform data). Rename some of the latter variables to end with 'plat' for consistency. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
41575d8e |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename auto_alloc_size members to be shorter This construct is quite long-winded. In earlier days it made some sense since auto-allocation was a strange concept. But with driver model now used pretty universally, we can shorten this to 'auto'. This reduces verbosity and makes it easier to read. Coincidentally it also ensures that every declaration is on one line, thus making dtoc's job easier. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
9b2e892e |
|
04-May-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: minor fix in DM ETH support Bus callback functions for read/write/reset need to be set only for DM_ETH, moving endif a bit lower. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f7ae49fc |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop log.h from common header Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e6f6f9e6 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop part.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
6eb32a03 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: add DM ETH support Probe the FMan MACs based on the device tree while retaining the legacy code/functionality. One notable change introduced here is that, for DM_ETH, the name of the interfaces is corrected to the fmX-macY format, that avoids the referral to the MAC block names which were incorrect for FMan v3 devices (i.e. DTSEC, TGEC) and had weird formatting (i.e. FM1@DTSEC6, FM1@TGEC1). The legacy code is left unchanged in this respect. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
1c710187 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: separate receive buffer free code Move the receive buffer free code in a separate function. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
8313cb02 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: change init_phy() param Change the init_phy() parameter to simplify the code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
f10643cf |
|
19-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: core: Access device ofnode through functions At present ofnode is present in the device even if it is never used. With of-platdata this field is not used, so can be removed. In preparation for this, change the access to go through inline functions. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
0fd3d911 |
|
22-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: Use access methods for dev/uclass private data Most drivers use these access methods but a few do not. Update them. In some cases the access is not permitted, so mark those with a FIXME tag for the maintainer to check. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Pratyush Yadav <p.yadav@ti.com>
|
#
c69cda25 |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename dev_get_platdata() to dev_get_plat() Rename this to be consistent with the change from 'platdata'. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
caa4daa2 |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename 'platdata' variables to just 'plat' We use 'priv' for private data but often use 'platdata' for platform data. We can't really use 'pdata' since that is ambiguous (it could mean private or platform data). Rename some of the latter variables to end with 'plat' for consistency. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
41575d8e |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename auto_alloc_size members to be shorter This construct is quite long-winded. In earlier days it made some sense since auto-allocation was a strange concept. But with driver model now used pretty universally, we can shorten this to 'auto'. This reduces verbosity and makes it easier to read. Coincidentally it also ensures that every declaration is on one line, thus making dtoc's job easier. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
9b2e892e |
|
04-May-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: minor fix in DM ETH support Bus callback functions for read/write/reset need to be set only for DM_ETH, moving endif a bit lower. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f7ae49fc |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop log.h from common header Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e6f6f9e6 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop part.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
6eb32a03 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: add DM ETH support Probe the FMan MACs based on the device tree while retaining the legacy code/functionality. One notable change introduced here is that, for DM_ETH, the name of the interfaces is corrected to the fmX-macY format, that avoids the referral to the MAC block names which were incorrect for FMan v3 devices (i.e. DTSEC, TGEC) and had weird formatting (i.e. FM1@DTSEC6, FM1@TGEC1). The legacy code is left unchanged in this respect. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
1c710187 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: separate receive buffer free code Move the receive buffer free code in a separate function. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
8313cb02 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: change init_phy() param Change the init_phy() parameter to simplify the code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
f10643cf |
|
19-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: core: Access device ofnode through functions At present ofnode is present in the device even if it is never used. With of-platdata this field is not used, so can be removed. In preparation for this, change the access to go through inline functions. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
0fd3d911 |
|
22-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: Use access methods for dev/uclass private data Most drivers use these access methods but a few do not. Update them. In some cases the access is not permitted, so mark those with a FIXME tag for the maintainer to check. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Pratyush Yadav <p.yadav@ti.com>
|
#
c69cda25 |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename dev_get_platdata() to dev_get_plat() Rename this to be consistent with the change from 'platdata'. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
caa4daa2 |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename 'platdata' variables to just 'plat' We use 'priv' for private data but often use 'platdata' for platform data. We can't really use 'pdata' since that is ambiguous (it could mean private or platform data). Rename some of the latter variables to end with 'plat' for consistency. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
41575d8e |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename auto_alloc_size members to be shorter This construct is quite long-winded. In earlier days it made some sense since auto-allocation was a strange concept. But with driver model now used pretty universally, we can shorten this to 'auto'. This reduces verbosity and makes it easier to read. Coincidentally it also ensures that every declaration is on one line, thus making dtoc's job easier. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
9b2e892e |
|
04-May-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: minor fix in DM ETH support Bus callback functions for read/write/reset need to be set only for DM_ETH, moving endif a bit lower. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f7ae49fc |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop log.h from common header Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e6f6f9e6 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop part.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
6eb32a03 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: add DM ETH support Probe the FMan MACs based on the device tree while retaining the legacy code/functionality. One notable change introduced here is that, for DM_ETH, the name of the interfaces is corrected to the fmX-macY format, that avoids the referral to the MAC block names which were incorrect for FMan v3 devices (i.e. DTSEC, TGEC) and had weird formatting (i.e. FM1@DTSEC6, FM1@TGEC1). The legacy code is left unchanged in this respect. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
1c710187 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: separate receive buffer free code Move the receive buffer free code in a separate function. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
8313cb02 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: change init_phy() param Change the init_phy() parameter to simplify the code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
f10643cf |
|
19-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: core: Access device ofnode through functions At present ofnode is present in the device even if it is never used. With of-platdata this field is not used, so can be removed. In preparation for this, change the access to go through inline functions. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
0fd3d911 |
|
22-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: Use access methods for dev/uclass private data Most drivers use these access methods but a few do not. Update them. In some cases the access is not permitted, so mark those with a FIXME tag for the maintainer to check. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Pratyush Yadav <p.yadav@ti.com>
|
#
c69cda25 |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename dev_get_platdata() to dev_get_plat() Rename this to be consistent with the change from 'platdata'. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
caa4daa2 |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename 'platdata' variables to just 'plat' We use 'priv' for private data but often use 'platdata' for platform data. We can't really use 'pdata' since that is ambiguous (it could mean private or platform data). Rename some of the latter variables to end with 'plat' for consistency. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
41575d8e |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename auto_alloc_size members to be shorter This construct is quite long-winded. In earlier days it made some sense since auto-allocation was a strange concept. But with driver model now used pretty universally, we can shorten this to 'auto'. This reduces verbosity and makes it easier to read. Coincidentally it also ensures that every declaration is on one line, thus making dtoc's job easier. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
9b2e892e |
|
04-May-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: minor fix in DM ETH support Bus callback functions for read/write/reset need to be set only for DM_ETH, moving endif a bit lower. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f7ae49fc |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop log.h from common header Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e6f6f9e6 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop part.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
6eb32a03 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: add DM ETH support Probe the FMan MACs based on the device tree while retaining the legacy code/functionality. One notable change introduced here is that, for DM_ETH, the name of the interfaces is corrected to the fmX-macY format, that avoids the referral to the MAC block names which were incorrect for FMan v3 devices (i.e. DTSEC, TGEC) and had weird formatting (i.e. FM1@DTSEC6, FM1@TGEC1). The legacy code is left unchanged in this respect. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
1c710187 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: separate receive buffer free code Move the receive buffer free code in a separate function. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
8313cb02 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: change init_phy() param Change the init_phy() parameter to simplify the code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
f10643cf |
|
19-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: core: Access device ofnode through functions At present ofnode is present in the device even if it is never used. With of-platdata this field is not used, so can be removed. In preparation for this, change the access to go through inline functions. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
0fd3d911 |
|
22-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: Use access methods for dev/uclass private data Most drivers use these access methods but a few do not. Update them. In some cases the access is not permitted, so mark those with a FIXME tag for the maintainer to check. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Pratyush Yadav <p.yadav@ti.com>
|
#
c69cda25 |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename dev_get_platdata() to dev_get_plat() Rename this to be consistent with the change from 'platdata'. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
caa4daa2 |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename 'platdata' variables to just 'plat' We use 'priv' for private data but often use 'platdata' for platform data. We can't really use 'pdata' since that is ambiguous (it could mean private or platform data). Rename some of the latter variables to end with 'plat' for consistency. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
41575d8e |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename auto_alloc_size members to be shorter This construct is quite long-winded. In earlier days it made some sense since auto-allocation was a strange concept. But with driver model now used pretty universally, we can shorten this to 'auto'. This reduces verbosity and makes it easier to read. Coincidentally it also ensures that every declaration is on one line, thus making dtoc's job easier. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
9b2e892e |
|
04-May-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: minor fix in DM ETH support Bus callback functions for read/write/reset need to be set only for DM_ETH, moving endif a bit lower. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f7ae49fc |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop log.h from common header Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e6f6f9e6 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop part.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
6eb32a03 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: add DM ETH support Probe the FMan MACs based on the device tree while retaining the legacy code/functionality. One notable change introduced here is that, for DM_ETH, the name of the interfaces is corrected to the fmX-macY format, that avoids the referral to the MAC block names which were incorrect for FMan v3 devices (i.e. DTSEC, TGEC) and had weird formatting (i.e. FM1@DTSEC6, FM1@TGEC1). The legacy code is left unchanged in this respect. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
1c710187 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: separate receive buffer free code Move the receive buffer free code in a separate function. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
8313cb02 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: change init_phy() param Change the init_phy() parameter to simplify the code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
f10643cf |
|
19-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: core: Access device ofnode through functions At present ofnode is present in the device even if it is never used. With of-platdata this field is not used, so can be removed. In preparation for this, change the access to go through inline functions. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
0fd3d911 |
|
22-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: Use access methods for dev/uclass private data Most drivers use these access methods but a few do not. Update them. In some cases the access is not permitted, so mark those with a FIXME tag for the maintainer to check. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Pratyush Yadav <p.yadav@ti.com>
|
#
c69cda25 |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename dev_get_platdata() to dev_get_plat() Rename this to be consistent with the change from 'platdata'. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
caa4daa2 |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename 'platdata' variables to just 'plat' We use 'priv' for private data but often use 'platdata' for platform data. We can't really use 'pdata' since that is ambiguous (it could mean private or platform data). Rename some of the latter variables to end with 'plat' for consistency. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
41575d8e |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename auto_alloc_size members to be shorter This construct is quite long-winded. In earlier days it made some sense since auto-allocation was a strange concept. But with driver model now used pretty universally, we can shorten this to 'auto'. This reduces verbosity and makes it easier to read. Coincidentally it also ensures that every declaration is on one line, thus making dtoc's job easier. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
9b2e892e |
|
04-May-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: minor fix in DM ETH support Bus callback functions for read/write/reset need to be set only for DM_ETH, moving endif a bit lower. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f7ae49fc |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop log.h from common header Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e6f6f9e6 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop part.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
6eb32a03 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: add DM ETH support Probe the FMan MACs based on the device tree while retaining the legacy code/functionality. One notable change introduced here is that, for DM_ETH, the name of the interfaces is corrected to the fmX-macY format, that avoids the referral to the MAC block names which were incorrect for FMan v3 devices (i.e. DTSEC, TGEC) and had weird formatting (i.e. FM1@DTSEC6, FM1@TGEC1). The legacy code is left unchanged in this respect. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
1c710187 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: separate receive buffer free code Move the receive buffer free code in a separate function. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
8313cb02 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: change init_phy() param Change the init_phy() parameter to simplify the code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
f10643cf |
|
19-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: core: Access device ofnode through functions At present ofnode is present in the device even if it is never used. With of-platdata this field is not used, so can be removed. In preparation for this, change the access to go through inline functions. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
0fd3d911 |
|
22-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: Use access methods for dev/uclass private data Most drivers use these access methods but a few do not. Update them. In some cases the access is not permitted, so mark those with a FIXME tag for the maintainer to check. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Pratyush Yadav <p.yadav@ti.com>
|
#
c69cda25 |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename dev_get_platdata() to dev_get_plat() Rename this to be consistent with the change from 'platdata'. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
caa4daa2 |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename 'platdata' variables to just 'plat' We use 'priv' for private data but often use 'platdata' for platform data. We can't really use 'pdata' since that is ambiguous (it could mean private or platform data). Rename some of the latter variables to end with 'plat' for consistency. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
41575d8e |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename auto_alloc_size members to be shorter This construct is quite long-winded. In earlier days it made some sense since auto-allocation was a strange concept. But with driver model now used pretty universally, we can shorten this to 'auto'. This reduces verbosity and makes it easier to read. Coincidentally it also ensures that every declaration is on one line, thus making dtoc's job easier. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
9b2e892e |
|
04-May-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: minor fix in DM ETH support Bus callback functions for read/write/reset need to be set only for DM_ETH, moving endif a bit lower. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f7ae49fc |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop log.h from common header Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e6f6f9e6 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop part.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
6eb32a03 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: add DM ETH support Probe the FMan MACs based on the device tree while retaining the legacy code/functionality. One notable change introduced here is that, for DM_ETH, the name of the interfaces is corrected to the fmX-macY format, that avoids the referral to the MAC block names which were incorrect for FMan v3 devices (i.e. DTSEC, TGEC) and had weird formatting (i.e. FM1@DTSEC6, FM1@TGEC1). The legacy code is left unchanged in this respect. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
1c710187 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: separate receive buffer free code Move the receive buffer free code in a separate function. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
8313cb02 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: change init_phy() param Change the init_phy() parameter to simplify the code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
f10643cf |
|
19-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: core: Access device ofnode through functions At present ofnode is present in the device even if it is never used. With of-platdata this field is not used, so can be removed. In preparation for this, change the access to go through inline functions. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
0fd3d911 |
|
22-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: Use access methods for dev/uclass private data Most drivers use these access methods but a few do not. Update them. In some cases the access is not permitted, so mark those with a FIXME tag for the maintainer to check. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Pratyush Yadav <p.yadav@ti.com>
|
#
c69cda25 |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename dev_get_platdata() to dev_get_plat() Rename this to be consistent with the change from 'platdata'. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
caa4daa2 |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename 'platdata' variables to just 'plat' We use 'priv' for private data but often use 'platdata' for platform data. We can't really use 'pdata' since that is ambiguous (it could mean private or platform data). Rename some of the latter variables to end with 'plat' for consistency. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
41575d8e |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename auto_alloc_size members to be shorter This construct is quite long-winded. In earlier days it made some sense since auto-allocation was a strange concept. But with driver model now used pretty universally, we can shorten this to 'auto'. This reduces verbosity and makes it easier to read. Coincidentally it also ensures that every declaration is on one line, thus making dtoc's job easier. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
9b2e892e |
|
04-May-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: minor fix in DM ETH support Bus callback functions for read/write/reset need to be set only for DM_ETH, moving endif a bit lower. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f7ae49fc |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop log.h from common header Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e6f6f9e6 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop part.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
6eb32a03 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: add DM ETH support Probe the FMan MACs based on the device tree while retaining the legacy code/functionality. One notable change introduced here is that, for DM_ETH, the name of the interfaces is corrected to the fmX-macY format, that avoids the referral to the MAC block names which were incorrect for FMan v3 devices (i.e. DTSEC, TGEC) and had weird formatting (i.e. FM1@DTSEC6, FM1@TGEC1). The legacy code is left unchanged in this respect. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
1c710187 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: separate receive buffer free code Move the receive buffer free code in a separate function. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
8313cb02 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: change init_phy() param Change the init_phy() parameter to simplify the code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
f10643cf |
|
19-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: core: Access device ofnode through functions At present ofnode is present in the device even if it is never used. With of-platdata this field is not used, so can be removed. In preparation for this, change the access to go through inline functions. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
0fd3d911 |
|
22-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: Use access methods for dev/uclass private data Most drivers use these access methods but a few do not. Update them. In some cases the access is not permitted, so mark those with a FIXME tag for the maintainer to check. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Pratyush Yadav <p.yadav@ti.com>
|
#
c69cda25 |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename dev_get_platdata() to dev_get_plat() Rename this to be consistent with the change from 'platdata'. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
caa4daa2 |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename 'platdata' variables to just 'plat' We use 'priv' for private data but often use 'platdata' for platform data. We can't really use 'pdata' since that is ambiguous (it could mean private or platform data). Rename some of the latter variables to end with 'plat' for consistency. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
41575d8e |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename auto_alloc_size members to be shorter This construct is quite long-winded. In earlier days it made some sense since auto-allocation was a strange concept. But with driver model now used pretty universally, we can shorten this to 'auto'. This reduces verbosity and makes it easier to read. Coincidentally it also ensures that every declaration is on one line, thus making dtoc's job easier. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
9b2e892e |
|
04-May-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: minor fix in DM ETH support Bus callback functions for read/write/reset need to be set only for DM_ETH, moving endif a bit lower. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f7ae49fc |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop log.h from common header Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e6f6f9e6 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop part.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
6eb32a03 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: add DM ETH support Probe the FMan MACs based on the device tree while retaining the legacy code/functionality. One notable change introduced here is that, for DM_ETH, the name of the interfaces is corrected to the fmX-macY format, that avoids the referral to the MAC block names which were incorrect for FMan v3 devices (i.e. DTSEC, TGEC) and had weird formatting (i.e. FM1@DTSEC6, FM1@TGEC1). The legacy code is left unchanged in this respect. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
1c710187 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: separate receive buffer free code Move the receive buffer free code in a separate function. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
8313cb02 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: change init_phy() param Change the init_phy() parameter to simplify the code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
f10643cf |
|
19-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: core: Access device ofnode through functions At present ofnode is present in the device even if it is never used. With of-platdata this field is not used, so can be removed. In preparation for this, change the access to go through inline functions. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
0fd3d911 |
|
22-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: Use access methods for dev/uclass private data Most drivers use these access methods but a few do not. Update them. In some cases the access is not permitted, so mark those with a FIXME tag for the maintainer to check. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Pratyush Yadav <p.yadav@ti.com>
|
#
c69cda25 |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename dev_get_platdata() to dev_get_plat() Rename this to be consistent with the change from 'platdata'. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
caa4daa2 |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename 'platdata' variables to just 'plat' We use 'priv' for private data but often use 'platdata' for platform data. We can't really use 'pdata' since that is ambiguous (it could mean private or platform data). Rename some of the latter variables to end with 'plat' for consistency. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
41575d8e |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename auto_alloc_size members to be shorter This construct is quite long-winded. In earlier days it made some sense since auto-allocation was a strange concept. But with driver model now used pretty universally, we can shorten this to 'auto'. This reduces verbosity and makes it easier to read. Coincidentally it also ensures that every declaration is on one line, thus making dtoc's job easier. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
9b2e892e |
|
04-May-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: minor fix in DM ETH support Bus callback functions for read/write/reset need to be set only for DM_ETH, moving endif a bit lower. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f7ae49fc |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop log.h from common header Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e6f6f9e6 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop part.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
6eb32a03 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: add DM ETH support Probe the FMan MACs based on the device tree while retaining the legacy code/functionality. One notable change introduced here is that, for DM_ETH, the name of the interfaces is corrected to the fmX-macY format, that avoids the referral to the MAC block names which were incorrect for FMan v3 devices (i.e. DTSEC, TGEC) and had weird formatting (i.e. FM1@DTSEC6, FM1@TGEC1). The legacy code is left unchanged in this respect. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
1c710187 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: separate receive buffer free code Move the receive buffer free code in a separate function. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
8313cb02 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: change init_phy() param Change the init_phy() parameter to simplify the code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
f10643cf |
|
19-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: core: Access device ofnode through functions At present ofnode is present in the device even if it is never used. With of-platdata this field is not used, so can be removed. In preparation for this, change the access to go through inline functions. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
0fd3d911 |
|
22-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: Use access methods for dev/uclass private data Most drivers use these access methods but a few do not. Update them. In some cases the access is not permitted, so mark those with a FIXME tag for the maintainer to check. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Pratyush Yadav <p.yadav@ti.com>
|
#
c69cda25 |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename dev_get_platdata() to dev_get_plat() Rename this to be consistent with the change from 'platdata'. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
caa4daa2 |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename 'platdata' variables to just 'plat' We use 'priv' for private data but often use 'platdata' for platform data. We can't really use 'pdata' since that is ambiguous (it could mean private or platform data). Rename some of the latter variables to end with 'plat' for consistency. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
41575d8e |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename auto_alloc_size members to be shorter This construct is quite long-winded. In earlier days it made some sense since auto-allocation was a strange concept. But with driver model now used pretty universally, we can shorten this to 'auto'. This reduces verbosity and makes it easier to read. Coincidentally it also ensures that every declaration is on one line, thus making dtoc's job easier. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
9b2e892e |
|
04-May-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: minor fix in DM ETH support Bus callback functions for read/write/reset need to be set only for DM_ETH, moving endif a bit lower. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f7ae49fc |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop log.h from common header Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e6f6f9e6 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop part.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
6eb32a03 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: add DM ETH support Probe the FMan MACs based on the device tree while retaining the legacy code/functionality. One notable change introduced here is that, for DM_ETH, the name of the interfaces is corrected to the fmX-macY format, that avoids the referral to the MAC block names which were incorrect for FMan v3 devices (i.e. DTSEC, TGEC) and had weird formatting (i.e. FM1@DTSEC6, FM1@TGEC1). The legacy code is left unchanged in this respect. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
1c710187 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: separate receive buffer free code Move the receive buffer free code in a separate function. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
8313cb02 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: change init_phy() param Change the init_phy() parameter to simplify the code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
f10643cf |
|
19-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: core: Access device ofnode through functions At present ofnode is present in the device even if it is never used. With of-platdata this field is not used, so can be removed. In preparation for this, change the access to go through inline functions. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
0fd3d911 |
|
22-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: Use access methods for dev/uclass private data Most drivers use these access methods but a few do not. Update them. In some cases the access is not permitted, so mark those with a FIXME tag for the maintainer to check. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Pratyush Yadav <p.yadav@ti.com>
|
#
c69cda25 |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename dev_get_platdata() to dev_get_plat() Rename this to be consistent with the change from 'platdata'. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
caa4daa2 |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename 'platdata' variables to just 'plat' We use 'priv' for private data but often use 'platdata' for platform data. We can't really use 'pdata' since that is ambiguous (it could mean private or platform data). Rename some of the latter variables to end with 'plat' for consistency. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
41575d8e |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename auto_alloc_size members to be shorter This construct is quite long-winded. In earlier days it made some sense since auto-allocation was a strange concept. But with driver model now used pretty universally, we can shorten this to 'auto'. This reduces verbosity and makes it easier to read. Coincidentally it also ensures that every declaration is on one line, thus making dtoc's job easier. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
9b2e892e |
|
04-May-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: minor fix in DM ETH support Bus callback functions for read/write/reset need to be set only for DM_ETH, moving endif a bit lower. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f7ae49fc |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop log.h from common header Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e6f6f9e6 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop part.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
6eb32a03 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: add DM ETH support Probe the FMan MACs based on the device tree while retaining the legacy code/functionality. One notable change introduced here is that, for DM_ETH, the name of the interfaces is corrected to the fmX-macY format, that avoids the referral to the MAC block names which were incorrect for FMan v3 devices (i.e. DTSEC, TGEC) and had weird formatting (i.e. FM1@DTSEC6, FM1@TGEC1). The legacy code is left unchanged in this respect. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
1c710187 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: separate receive buffer free code Move the receive buffer free code in a separate function. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
8313cb02 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: change init_phy() param Change the init_phy() parameter to simplify the code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
f10643cf |
|
19-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: core: Access device ofnode through functions At present ofnode is present in the device even if it is never used. With of-platdata this field is not used, so can be removed. In preparation for this, change the access to go through inline functions. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
0fd3d911 |
|
22-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: Use access methods for dev/uclass private data Most drivers use these access methods but a few do not. Update them. In some cases the access is not permitted, so mark those with a FIXME tag for the maintainer to check. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Pratyush Yadav <p.yadav@ti.com>
|
#
c69cda25 |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename dev_get_platdata() to dev_get_plat() Rename this to be consistent with the change from 'platdata'. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
caa4daa2 |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename 'platdata' variables to just 'plat' We use 'priv' for private data but often use 'platdata' for platform data. We can't really use 'pdata' since that is ambiguous (it could mean private or platform data). Rename some of the latter variables to end with 'plat' for consistency. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
41575d8e |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename auto_alloc_size members to be shorter This construct is quite long-winded. In earlier days it made some sense since auto-allocation was a strange concept. But with driver model now used pretty universally, we can shorten this to 'auto'. This reduces verbosity and makes it easier to read. Coincidentally it also ensures that every declaration is on one line, thus making dtoc's job easier. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
9b2e892e |
|
04-May-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: minor fix in DM ETH support Bus callback functions for read/write/reset need to be set only for DM_ETH, moving endif a bit lower. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f7ae49fc |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop log.h from common header Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e6f6f9e6 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop part.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
6eb32a03 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: add DM ETH support Probe the FMan MACs based on the device tree while retaining the legacy code/functionality. One notable change introduced here is that, for DM_ETH, the name of the interfaces is corrected to the fmX-macY format, that avoids the referral to the MAC block names which were incorrect for FMan v3 devices (i.e. DTSEC, TGEC) and had weird formatting (i.e. FM1@DTSEC6, FM1@TGEC1). The legacy code is left unchanged in this respect. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
1c710187 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: separate receive buffer free code Move the receive buffer free code in a separate function. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
8313cb02 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: change init_phy() param Change the init_phy() parameter to simplify the code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
f10643cf |
|
19-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: core: Access device ofnode through functions At present ofnode is present in the device even if it is never used. With of-platdata this field is not used, so can be removed. In preparation for this, change the access to go through inline functions. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
0fd3d911 |
|
22-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: Use access methods for dev/uclass private data Most drivers use these access methods but a few do not. Update them. In some cases the access is not permitted, so mark those with a FIXME tag for the maintainer to check. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Pratyush Yadav <p.yadav@ti.com>
|
#
c69cda25 |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename dev_get_platdata() to dev_get_plat() Rename this to be consistent with the change from 'platdata'. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
caa4daa2 |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename 'platdata' variables to just 'plat' We use 'priv' for private data but often use 'platdata' for platform data. We can't really use 'pdata' since that is ambiguous (it could mean private or platform data). Rename some of the latter variables to end with 'plat' for consistency. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
41575d8e |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename auto_alloc_size members to be shorter This construct is quite long-winded. In earlier days it made some sense since auto-allocation was a strange concept. But with driver model now used pretty universally, we can shorten this to 'auto'. This reduces verbosity and makes it easier to read. Coincidentally it also ensures that every declaration is on one line, thus making dtoc's job easier. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
9b2e892e |
|
04-May-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: minor fix in DM ETH support Bus callback functions for read/write/reset need to be set only for DM_ETH, moving endif a bit lower. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f7ae49fc |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop log.h from common header Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e6f6f9e6 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop part.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
6eb32a03 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: add DM ETH support Probe the FMan MACs based on the device tree while retaining the legacy code/functionality. One notable change introduced here is that, for DM_ETH, the name of the interfaces is corrected to the fmX-macY format, that avoids the referral to the MAC block names which were incorrect for FMan v3 devices (i.e. DTSEC, TGEC) and had weird formatting (i.e. FM1@DTSEC6, FM1@TGEC1). The legacy code is left unchanged in this respect. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
1c710187 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: separate receive buffer free code Move the receive buffer free code in a separate function. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
8313cb02 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: change init_phy() param Change the init_phy() parameter to simplify the code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
f10643cf |
|
19-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: core: Access device ofnode through functions At present ofnode is present in the device even if it is never used. With of-platdata this field is not used, so can be removed. In preparation for this, change the access to go through inline functions. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
0fd3d911 |
|
22-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: Use access methods for dev/uclass private data Most drivers use these access methods but a few do not. Update them. In some cases the access is not permitted, so mark those with a FIXME tag for the maintainer to check. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Pratyush Yadav <p.yadav@ti.com>
|
#
c69cda25 |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename dev_get_platdata() to dev_get_plat() Rename this to be consistent with the change from 'platdata'. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
caa4daa2 |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename 'platdata' variables to just 'plat' We use 'priv' for private data but often use 'platdata' for platform data. We can't really use 'pdata' since that is ambiguous (it could mean private or platform data). Rename some of the latter variables to end with 'plat' for consistency. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
41575d8e |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename auto_alloc_size members to be shorter This construct is quite long-winded. In earlier days it made some sense since auto-allocation was a strange concept. But with driver model now used pretty universally, we can shorten this to 'auto'. This reduces verbosity and makes it easier to read. Coincidentally it also ensures that every declaration is on one line, thus making dtoc's job easier. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
9b2e892e |
|
04-May-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: minor fix in DM ETH support Bus callback functions for read/write/reset need to be set only for DM_ETH, moving endif a bit lower. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f7ae49fc |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop log.h from common header Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e6f6f9e6 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop part.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
6eb32a03 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: add DM ETH support Probe the FMan MACs based on the device tree while retaining the legacy code/functionality. One notable change introduced here is that, for DM_ETH, the name of the interfaces is corrected to the fmX-macY format, that avoids the referral to the MAC block names which were incorrect for FMan v3 devices (i.e. DTSEC, TGEC) and had weird formatting (i.e. FM1@DTSEC6, FM1@TGEC1). The legacy code is left unchanged in this respect. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
1c710187 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: separate receive buffer free code Move the receive buffer free code in a separate function. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
8313cb02 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: change init_phy() param Change the init_phy() parameter to simplify the code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
f10643cf |
|
19-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: core: Access device ofnode through functions At present ofnode is present in the device even if it is never used. With of-platdata this field is not used, so can be removed. In preparation for this, change the access to go through inline functions. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
0fd3d911 |
|
22-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: Use access methods for dev/uclass private data Most drivers use these access methods but a few do not. Update them. In some cases the access is not permitted, so mark those with a FIXME tag for the maintainer to check. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Pratyush Yadav <p.yadav@ti.com>
|
#
c69cda25 |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename dev_get_platdata() to dev_get_plat() Rename this to be consistent with the change from 'platdata'. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
caa4daa2 |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename 'platdata' variables to just 'plat' We use 'priv' for private data but often use 'platdata' for platform data. We can't really use 'pdata' since that is ambiguous (it could mean private or platform data). Rename some of the latter variables to end with 'plat' for consistency. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
41575d8e |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename auto_alloc_size members to be shorter This construct is quite long-winded. In earlier days it made some sense since auto-allocation was a strange concept. But with driver model now used pretty universally, we can shorten this to 'auto'. This reduces verbosity and makes it easier to read. Coincidentally it also ensures that every declaration is on one line, thus making dtoc's job easier. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
9b2e892e |
|
04-May-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: minor fix in DM ETH support Bus callback functions for read/write/reset need to be set only for DM_ETH, moving endif a bit lower. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f7ae49fc |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop log.h from common header Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e6f6f9e6 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop part.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
6eb32a03 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: add DM ETH support Probe the FMan MACs based on the device tree while retaining the legacy code/functionality. One notable change introduced here is that, for DM_ETH, the name of the interfaces is corrected to the fmX-macY format, that avoids the referral to the MAC block names which were incorrect for FMan v3 devices (i.e. DTSEC, TGEC) and had weird formatting (i.e. FM1@DTSEC6, FM1@TGEC1). The legacy code is left unchanged in this respect. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
1c710187 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: separate receive buffer free code Move the receive buffer free code in a separate function. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
8313cb02 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: change init_phy() param Change the init_phy() parameter to simplify the code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
f10643cf |
|
19-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: core: Access device ofnode through functions At present ofnode is present in the device even if it is never used. With of-platdata this field is not used, so can be removed. In preparation for this, change the access to go through inline functions. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
0fd3d911 |
|
22-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: Use access methods for dev/uclass private data Most drivers use these access methods but a few do not. Update them. In some cases the access is not permitted, so mark those with a FIXME tag for the maintainer to check. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Pratyush Yadav <p.yadav@ti.com>
|
#
c69cda25 |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename dev_get_platdata() to dev_get_plat() Rename this to be consistent with the change from 'platdata'. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
caa4daa2 |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename 'platdata' variables to just 'plat' We use 'priv' for private data but often use 'platdata' for platform data. We can't really use 'pdata' since that is ambiguous (it could mean private or platform data). Rename some of the latter variables to end with 'plat' for consistency. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
41575d8e |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename auto_alloc_size members to be shorter This construct is quite long-winded. In earlier days it made some sense since auto-allocation was a strange concept. But with driver model now used pretty universally, we can shorten this to 'auto'. This reduces verbosity and makes it easier to read. Coincidentally it also ensures that every declaration is on one line, thus making dtoc's job easier. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
9b2e892e |
|
04-May-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: minor fix in DM ETH support Bus callback functions for read/write/reset need to be set only for DM_ETH, moving endif a bit lower. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f7ae49fc |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop log.h from common header Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e6f6f9e6 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop part.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
6eb32a03 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: add DM ETH support Probe the FMan MACs based on the device tree while retaining the legacy code/functionality. One notable change introduced here is that, for DM_ETH, the name of the interfaces is corrected to the fmX-macY format, that avoids the referral to the MAC block names which were incorrect for FMan v3 devices (i.e. DTSEC, TGEC) and had weird formatting (i.e. FM1@DTSEC6, FM1@TGEC1). The legacy code is left unchanged in this respect. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
1c710187 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: separate receive buffer free code Move the receive buffer free code in a separate function. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
8313cb02 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: change init_phy() param Change the init_phy() parameter to simplify the code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
f10643cf |
|
19-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: core: Access device ofnode through functions At present ofnode is present in the device even if it is never used. With of-platdata this field is not used, so can be removed. In preparation for this, change the access to go through inline functions. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
0fd3d911 |
|
22-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: Use access methods for dev/uclass private data Most drivers use these access methods but a few do not. Update them. In some cases the access is not permitted, so mark those with a FIXME tag for the maintainer to check. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Pratyush Yadav <p.yadav@ti.com>
|
#
c69cda25 |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename dev_get_platdata() to dev_get_plat() Rename this to be consistent with the change from 'platdata'. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
caa4daa2 |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename 'platdata' variables to just 'plat' We use 'priv' for private data but often use 'platdata' for platform data. We can't really use 'pdata' since that is ambiguous (it could mean private or platform data). Rename some of the latter variables to end with 'plat' for consistency. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
41575d8e |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename auto_alloc_size members to be shorter This construct is quite long-winded. In earlier days it made some sense since auto-allocation was a strange concept. But with driver model now used pretty universally, we can shorten this to 'auto'. This reduces verbosity and makes it easier to read. Coincidentally it also ensures that every declaration is on one line, thus making dtoc's job easier. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
9b2e892e |
|
04-May-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: minor fix in DM ETH support Bus callback functions for read/write/reset need to be set only for DM_ETH, moving endif a bit lower. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f7ae49fc |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop log.h from common header Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e6f6f9e6 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop part.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
6eb32a03 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: add DM ETH support Probe the FMan MACs based on the device tree while retaining the legacy code/functionality. One notable change introduced here is that, for DM_ETH, the name of the interfaces is corrected to the fmX-macY format, that avoids the referral to the MAC block names which were incorrect for FMan v3 devices (i.e. DTSEC, TGEC) and had weird formatting (i.e. FM1@DTSEC6, FM1@TGEC1). The legacy code is left unchanged in this respect. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
1c710187 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: separate receive buffer free code Move the receive buffer free code in a separate function. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
8313cb02 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: change init_phy() param Change the init_phy() parameter to simplify the code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
f10643cf |
|
19-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: core: Access device ofnode through functions At present ofnode is present in the device even if it is never used. With of-platdata this field is not used, so can be removed. In preparation for this, change the access to go through inline functions. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
0fd3d911 |
|
22-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: Use access methods for dev/uclass private data Most drivers use these access methods but a few do not. Update them. In some cases the access is not permitted, so mark those with a FIXME tag for the maintainer to check. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Pratyush Yadav <p.yadav@ti.com>
|
#
c69cda25 |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename dev_get_platdata() to dev_get_plat() Rename this to be consistent with the change from 'platdata'. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
caa4daa2 |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename 'platdata' variables to just 'plat' We use 'priv' for private data but often use 'platdata' for platform data. We can't really use 'pdata' since that is ambiguous (it could mean private or platform data). Rename some of the latter variables to end with 'plat' for consistency. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
41575d8e |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename auto_alloc_size members to be shorter This construct is quite long-winded. In earlier days it made some sense since auto-allocation was a strange concept. But with driver model now used pretty universally, we can shorten this to 'auto'. This reduces verbosity and makes it easier to read. Coincidentally it also ensures that every declaration is on one line, thus making dtoc's job easier. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
9b2e892e |
|
04-May-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: minor fix in DM ETH support Bus callback functions for read/write/reset need to be set only for DM_ETH, moving endif a bit lower. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f7ae49fc |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop log.h from common header Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e6f6f9e6 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop part.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
6eb32a03 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: add DM ETH support Probe the FMan MACs based on the device tree while retaining the legacy code/functionality. One notable change introduced here is that, for DM_ETH, the name of the interfaces is corrected to the fmX-macY format, that avoids the referral to the MAC block names which were incorrect for FMan v3 devices (i.e. DTSEC, TGEC) and had weird formatting (i.e. FM1@DTSEC6, FM1@TGEC1). The legacy code is left unchanged in this respect. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
1c710187 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: separate receive buffer free code Move the receive buffer free code in a separate function. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
8313cb02 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: change init_phy() param Change the init_phy() parameter to simplify the code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
f10643cf |
|
19-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: core: Access device ofnode through functions At present ofnode is present in the device even if it is never used. With of-platdata this field is not used, so can be removed. In preparation for this, change the access to go through inline functions. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
0fd3d911 |
|
22-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: Use access methods for dev/uclass private data Most drivers use these access methods but a few do not. Update them. In some cases the access is not permitted, so mark those with a FIXME tag for the maintainer to check. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Pratyush Yadav <p.yadav@ti.com>
|
#
c69cda25 |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename dev_get_platdata() to dev_get_plat() Rename this to be consistent with the change from 'platdata'. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
caa4daa2 |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename 'platdata' variables to just 'plat' We use 'priv' for private data but often use 'platdata' for platform data. We can't really use 'pdata' since that is ambiguous (it could mean private or platform data). Rename some of the latter variables to end with 'plat' for consistency. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
41575d8e |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename auto_alloc_size members to be shorter This construct is quite long-winded. In earlier days it made some sense since auto-allocation was a strange concept. But with driver model now used pretty universally, we can shorten this to 'auto'. This reduces verbosity and makes it easier to read. Coincidentally it also ensures that every declaration is on one line, thus making dtoc's job easier. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
9b2e892e |
|
04-May-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: minor fix in DM ETH support Bus callback functions for read/write/reset need to be set only for DM_ETH, moving endif a bit lower. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f7ae49fc |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop log.h from common header Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e6f6f9e6 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop part.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
6eb32a03 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: add DM ETH support Probe the FMan MACs based on the device tree while retaining the legacy code/functionality. One notable change introduced here is that, for DM_ETH, the name of the interfaces is corrected to the fmX-macY format, that avoids the referral to the MAC block names which were incorrect for FMan v3 devices (i.e. DTSEC, TGEC) and had weird formatting (i.e. FM1@DTSEC6, FM1@TGEC1). The legacy code is left unchanged in this respect. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
1c710187 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: separate receive buffer free code Move the receive buffer free code in a separate function. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
8313cb02 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: change init_phy() param Change the init_phy() parameter to simplify the code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
f10643cf |
|
19-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: core: Access device ofnode through functions At present ofnode is present in the device even if it is never used. With of-platdata this field is not used, so can be removed. In preparation for this, change the access to go through inline functions. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
0fd3d911 |
|
22-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: Use access methods for dev/uclass private data Most drivers use these access methods but a few do not. Update them. In some cases the access is not permitted, so mark those with a FIXME tag for the maintainer to check. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Pratyush Yadav <p.yadav@ti.com>
|
#
c69cda25 |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename dev_get_platdata() to dev_get_plat() Rename this to be consistent with the change from 'platdata'. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
caa4daa2 |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename 'platdata' variables to just 'plat' We use 'priv' for private data but often use 'platdata' for platform data. We can't really use 'pdata' since that is ambiguous (it could mean private or platform data). Rename some of the latter variables to end with 'plat' for consistency. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
41575d8e |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename auto_alloc_size members to be shorter This construct is quite long-winded. In earlier days it made some sense since auto-allocation was a strange concept. But with driver model now used pretty universally, we can shorten this to 'auto'. This reduces verbosity and makes it easier to read. Coincidentally it also ensures that every declaration is on one line, thus making dtoc's job easier. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
9b2e892e |
|
04-May-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: minor fix in DM ETH support Bus callback functions for read/write/reset need to be set only for DM_ETH, moving endif a bit lower. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f7ae49fc |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop log.h from common header Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e6f6f9e6 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop part.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
6eb32a03 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: add DM ETH support Probe the FMan MACs based on the device tree while retaining the legacy code/functionality. One notable change introduced here is that, for DM_ETH, the name of the interfaces is corrected to the fmX-macY format, that avoids the referral to the MAC block names which were incorrect for FMan v3 devices (i.e. DTSEC, TGEC) and had weird formatting (i.e. FM1@DTSEC6, FM1@TGEC1). The legacy code is left unchanged in this respect. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
1c710187 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: separate receive buffer free code Move the receive buffer free code in a separate function. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
8313cb02 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: change init_phy() param Change the init_phy() parameter to simplify the code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
f10643cf |
|
19-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: core: Access device ofnode through functions At present ofnode is present in the device even if it is never used. With of-platdata this field is not used, so can be removed. In preparation for this, change the access to go through inline functions. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
0fd3d911 |
|
22-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: Use access methods for dev/uclass private data Most drivers use these access methods but a few do not. Update them. In some cases the access is not permitted, so mark those with a FIXME tag for the maintainer to check. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Pratyush Yadav <p.yadav@ti.com>
|
#
c69cda25 |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename dev_get_platdata() to dev_get_plat() Rename this to be consistent with the change from 'platdata'. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
caa4daa2 |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename 'platdata' variables to just 'plat' We use 'priv' for private data but often use 'platdata' for platform data. We can't really use 'pdata' since that is ambiguous (it could mean private or platform data). Rename some of the latter variables to end with 'plat' for consistency. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
41575d8e |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename auto_alloc_size members to be shorter This construct is quite long-winded. In earlier days it made some sense since auto-allocation was a strange concept. But with driver model now used pretty universally, we can shorten this to 'auto'. This reduces verbosity and makes it easier to read. Coincidentally it also ensures that every declaration is on one line, thus making dtoc's job easier. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
9b2e892e |
|
04-May-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: minor fix in DM ETH support Bus callback functions for read/write/reset need to be set only for DM_ETH, moving endif a bit lower. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f7ae49fc |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop log.h from common header Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e6f6f9e6 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop part.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
6eb32a03 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: add DM ETH support Probe the FMan MACs based on the device tree while retaining the legacy code/functionality. One notable change introduced here is that, for DM_ETH, the name of the interfaces is corrected to the fmX-macY format, that avoids the referral to the MAC block names which were incorrect for FMan v3 devices (i.e. DTSEC, TGEC) and had weird formatting (i.e. FM1@DTSEC6, FM1@TGEC1). The legacy code is left unchanged in this respect. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
1c710187 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: separate receive buffer free code Move the receive buffer free code in a separate function. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
8313cb02 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: change init_phy() param Change the init_phy() parameter to simplify the code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
f10643cf |
|
19-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: core: Access device ofnode through functions At present ofnode is present in the device even if it is never used. With of-platdata this field is not used, so can be removed. In preparation for this, change the access to go through inline functions. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
0fd3d911 |
|
22-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: Use access methods for dev/uclass private data Most drivers use these access methods but a few do not. Update them. In some cases the access is not permitted, so mark those with a FIXME tag for the maintainer to check. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Pratyush Yadav <p.yadav@ti.com>
|
#
c69cda25 |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename dev_get_platdata() to dev_get_plat() Rename this to be consistent with the change from 'platdata'. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
caa4daa2 |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename 'platdata' variables to just 'plat' We use 'priv' for private data but often use 'platdata' for platform data. We can't really use 'pdata' since that is ambiguous (it could mean private or platform data). Rename some of the latter variables to end with 'plat' for consistency. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
41575d8e |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename auto_alloc_size members to be shorter This construct is quite long-winded. In earlier days it made some sense since auto-allocation was a strange concept. But with driver model now used pretty universally, we can shorten this to 'auto'. This reduces verbosity and makes it easier to read. Coincidentally it also ensures that every declaration is on one line, thus making dtoc's job easier. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
9b2e892e |
|
04-May-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: minor fix in DM ETH support Bus callback functions for read/write/reset need to be set only for DM_ETH, moving endif a bit lower. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f7ae49fc |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop log.h from common header Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e6f6f9e6 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop part.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
6eb32a03 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: add DM ETH support Probe the FMan MACs based on the device tree while retaining the legacy code/functionality. One notable change introduced here is that, for DM_ETH, the name of the interfaces is corrected to the fmX-macY format, that avoids the referral to the MAC block names which were incorrect for FMan v3 devices (i.e. DTSEC, TGEC) and had weird formatting (i.e. FM1@DTSEC6, FM1@TGEC1). The legacy code is left unchanged in this respect. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
1c710187 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: separate receive buffer free code Move the receive buffer free code in a separate function. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
8313cb02 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: change init_phy() param Change the init_phy() parameter to simplify the code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
f10643cf |
|
19-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: core: Access device ofnode through functions At present ofnode is present in the device even if it is never used. With of-platdata this field is not used, so can be removed. In preparation for this, change the access to go through inline functions. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
0fd3d911 |
|
22-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: Use access methods for dev/uclass private data Most drivers use these access methods but a few do not. Update them. In some cases the access is not permitted, so mark those with a FIXME tag for the maintainer to check. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Pratyush Yadav <p.yadav@ti.com>
|
#
c69cda25 |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename dev_get_platdata() to dev_get_plat() Rename this to be consistent with the change from 'platdata'. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
caa4daa2 |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename 'platdata' variables to just 'plat' We use 'priv' for private data but often use 'platdata' for platform data. We can't really use 'pdata' since that is ambiguous (it could mean private or platform data). Rename some of the latter variables to end with 'plat' for consistency. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
41575d8e |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename auto_alloc_size members to be shorter This construct is quite long-winded. In earlier days it made some sense since auto-allocation was a strange concept. But with driver model now used pretty universally, we can shorten this to 'auto'. This reduces verbosity and makes it easier to read. Coincidentally it also ensures that every declaration is on one line, thus making dtoc's job easier. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
9b2e892e |
|
04-May-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: minor fix in DM ETH support Bus callback functions for read/write/reset need to be set only for DM_ETH, moving endif a bit lower. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f7ae49fc |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop log.h from common header Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e6f6f9e6 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop part.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
6eb32a03 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: add DM ETH support Probe the FMan MACs based on the device tree while retaining the legacy code/functionality. One notable change introduced here is that, for DM_ETH, the name of the interfaces is corrected to the fmX-macY format, that avoids the referral to the MAC block names which were incorrect for FMan v3 devices (i.e. DTSEC, TGEC) and had weird formatting (i.e. FM1@DTSEC6, FM1@TGEC1). The legacy code is left unchanged in this respect. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
1c710187 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: separate receive buffer free code Move the receive buffer free code in a separate function. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
8313cb02 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: change init_phy() param Change the init_phy() parameter to simplify the code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
f10643cf |
|
19-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: core: Access device ofnode through functions At present ofnode is present in the device even if it is never used. With of-platdata this field is not used, so can be removed. In preparation for this, change the access to go through inline functions. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
0fd3d911 |
|
22-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: Use access methods for dev/uclass private data Most drivers use these access methods but a few do not. Update them. In some cases the access is not permitted, so mark those with a FIXME tag for the maintainer to check. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Pratyush Yadav <p.yadav@ti.com>
|
#
c69cda25 |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename dev_get_platdata() to dev_get_plat() Rename this to be consistent with the change from 'platdata'. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
caa4daa2 |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename 'platdata' variables to just 'plat' We use 'priv' for private data but often use 'platdata' for platform data. We can't really use 'pdata' since that is ambiguous (it could mean private or platform data). Rename some of the latter variables to end with 'plat' for consistency. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
41575d8e |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename auto_alloc_size members to be shorter This construct is quite long-winded. In earlier days it made some sense since auto-allocation was a strange concept. But with driver model now used pretty universally, we can shorten this to 'auto'. This reduces verbosity and makes it easier to read. Coincidentally it also ensures that every declaration is on one line, thus making dtoc's job easier. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
9b2e892e |
|
04-May-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: minor fix in DM ETH support Bus callback functions for read/write/reset need to be set only for DM_ETH, moving endif a bit lower. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f7ae49fc |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop log.h from common header Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e6f6f9e6 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop part.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
6eb32a03 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: add DM ETH support Probe the FMan MACs based on the device tree while retaining the legacy code/functionality. One notable change introduced here is that, for DM_ETH, the name of the interfaces is corrected to the fmX-macY format, that avoids the referral to the MAC block names which were incorrect for FMan v3 devices (i.e. DTSEC, TGEC) and had weird formatting (i.e. FM1@DTSEC6, FM1@TGEC1). The legacy code is left unchanged in this respect. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
1c710187 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: separate receive buffer free code Move the receive buffer free code in a separate function. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
8313cb02 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: change init_phy() param Change the init_phy() parameter to simplify the code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
f10643cf |
|
19-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: core: Access device ofnode through functions At present ofnode is present in the device even if it is never used. With of-platdata this field is not used, so can be removed. In preparation for this, change the access to go through inline functions. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
0fd3d911 |
|
22-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: Use access methods for dev/uclass private data Most drivers use these access methods but a few do not. Update them. In some cases the access is not permitted, so mark those with a FIXME tag for the maintainer to check. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Pratyush Yadav <p.yadav@ti.com>
|
#
c69cda25 |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename dev_get_platdata() to dev_get_plat() Rename this to be consistent with the change from 'platdata'. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
caa4daa2 |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename 'platdata' variables to just 'plat' We use 'priv' for private data but often use 'platdata' for platform data. We can't really use 'pdata' since that is ambiguous (it could mean private or platform data). Rename some of the latter variables to end with 'plat' for consistency. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
41575d8e |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename auto_alloc_size members to be shorter This construct is quite long-winded. In earlier days it made some sense since auto-allocation was a strange concept. But with driver model now used pretty universally, we can shorten this to 'auto'. This reduces verbosity and makes it easier to read. Coincidentally it also ensures that every declaration is on one line, thus making dtoc's job easier. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
9b2e892e |
|
04-May-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: minor fix in DM ETH support Bus callback functions for read/write/reset need to be set only for DM_ETH, moving endif a bit lower. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f7ae49fc |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop log.h from common header Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e6f6f9e6 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop part.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
6eb32a03 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: add DM ETH support Probe the FMan MACs based on the device tree while retaining the legacy code/functionality. One notable change introduced here is that, for DM_ETH, the name of the interfaces is corrected to the fmX-macY format, that avoids the referral to the MAC block names which were incorrect for FMan v3 devices (i.e. DTSEC, TGEC) and had weird formatting (i.e. FM1@DTSEC6, FM1@TGEC1). The legacy code is left unchanged in this respect. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
1c710187 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: separate receive buffer free code Move the receive buffer free code in a separate function. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
8313cb02 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: change init_phy() param Change the init_phy() parameter to simplify the code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
f10643cf |
|
19-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: core: Access device ofnode through functions At present ofnode is present in the device even if it is never used. With of-platdata this field is not used, so can be removed. In preparation for this, change the access to go through inline functions. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
0fd3d911 |
|
22-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: Use access methods for dev/uclass private data Most drivers use these access methods but a few do not. Update them. In some cases the access is not permitted, so mark those with a FIXME tag for the maintainer to check. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Pratyush Yadav <p.yadav@ti.com>
|
#
c69cda25 |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename dev_get_platdata() to dev_get_plat() Rename this to be consistent with the change from 'platdata'. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
caa4daa2 |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename 'platdata' variables to just 'plat' We use 'priv' for private data but often use 'platdata' for platform data. We can't really use 'pdata' since that is ambiguous (it could mean private or platform data). Rename some of the latter variables to end with 'plat' for consistency. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
41575d8e |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename auto_alloc_size members to be shorter This construct is quite long-winded. In earlier days it made some sense since auto-allocation was a strange concept. But with driver model now used pretty universally, we can shorten this to 'auto'. This reduces verbosity and makes it easier to read. Coincidentally it also ensures that every declaration is on one line, thus making dtoc's job easier. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
9b2e892e |
|
04-May-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: minor fix in DM ETH support Bus callback functions for read/write/reset need to be set only for DM_ETH, moving endif a bit lower. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f7ae49fc |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop log.h from common header Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e6f6f9e6 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop part.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
6eb32a03 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: add DM ETH support Probe the FMan MACs based on the device tree while retaining the legacy code/functionality. One notable change introduced here is that, for DM_ETH, the name of the interfaces is corrected to the fmX-macY format, that avoids the referral to the MAC block names which were incorrect for FMan v3 devices (i.e. DTSEC, TGEC) and had weird formatting (i.e. FM1@DTSEC6, FM1@TGEC1). The legacy code is left unchanged in this respect. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
1c710187 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: separate receive buffer free code Move the receive buffer free code in a separate function. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
8313cb02 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: change init_phy() param Change the init_phy() parameter to simplify the code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
f10643cf |
|
19-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: core: Access device ofnode through functions At present ofnode is present in the device even if it is never used. With of-platdata this field is not used, so can be removed. In preparation for this, change the access to go through inline functions. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
0fd3d911 |
|
22-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: Use access methods for dev/uclass private data Most drivers use these access methods but a few do not. Update them. In some cases the access is not permitted, so mark those with a FIXME tag for the maintainer to check. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Pratyush Yadav <p.yadav@ti.com>
|
#
c69cda25 |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename dev_get_platdata() to dev_get_plat() Rename this to be consistent with the change from 'platdata'. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
caa4daa2 |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename 'platdata' variables to just 'plat' We use 'priv' for private data but often use 'platdata' for platform data. We can't really use 'pdata' since that is ambiguous (it could mean private or platform data). Rename some of the latter variables to end with 'plat' for consistency. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
41575d8e |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename auto_alloc_size members to be shorter This construct is quite long-winded. In earlier days it made some sense since auto-allocation was a strange concept. But with driver model now used pretty universally, we can shorten this to 'auto'. This reduces verbosity and makes it easier to read. Coincidentally it also ensures that every declaration is on one line, thus making dtoc's job easier. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
9b2e892e |
|
04-May-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: minor fix in DM ETH support Bus callback functions for read/write/reset need to be set only for DM_ETH, moving endif a bit lower. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f7ae49fc |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop log.h from common header Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e6f6f9e6 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop part.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
6eb32a03 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: add DM ETH support Probe the FMan MACs based on the device tree while retaining the legacy code/functionality. One notable change introduced here is that, for DM_ETH, the name of the interfaces is corrected to the fmX-macY format, that avoids the referral to the MAC block names which were incorrect for FMan v3 devices (i.e. DTSEC, TGEC) and had weird formatting (i.e. FM1@DTSEC6, FM1@TGEC1). The legacy code is left unchanged in this respect. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
1c710187 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: separate receive buffer free code Move the receive buffer free code in a separate function. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
8313cb02 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: change init_phy() param Change the init_phy() parameter to simplify the code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
f10643cf |
|
19-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: core: Access device ofnode through functions At present ofnode is present in the device even if it is never used. With of-platdata this field is not used, so can be removed. In preparation for this, change the access to go through inline functions. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
0fd3d911 |
|
22-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: Use access methods for dev/uclass private data Most drivers use these access methods but a few do not. Update them. In some cases the access is not permitted, so mark those with a FIXME tag for the maintainer to check. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Pratyush Yadav <p.yadav@ti.com>
|
#
c69cda25 |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename dev_get_platdata() to dev_get_plat() Rename this to be consistent with the change from 'platdata'. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
caa4daa2 |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename 'platdata' variables to just 'plat' We use 'priv' for private data but often use 'platdata' for platform data. We can't really use 'pdata' since that is ambiguous (it could mean private or platform data). Rename some of the latter variables to end with 'plat' for consistency. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
41575d8e |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename auto_alloc_size members to be shorter This construct is quite long-winded. In earlier days it made some sense since auto-allocation was a strange concept. But with driver model now used pretty universally, we can shorten this to 'auto'. This reduces verbosity and makes it easier to read. Coincidentally it also ensures that every declaration is on one line, thus making dtoc's job easier. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
9b2e892e |
|
04-May-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: minor fix in DM ETH support Bus callback functions for read/write/reset need to be set only for DM_ETH, moving endif a bit lower. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f7ae49fc |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop log.h from common header Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e6f6f9e6 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop part.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
6eb32a03 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: add DM ETH support Probe the FMan MACs based on the device tree while retaining the legacy code/functionality. One notable change introduced here is that, for DM_ETH, the name of the interfaces is corrected to the fmX-macY format, that avoids the referral to the MAC block names which were incorrect for FMan v3 devices (i.e. DTSEC, TGEC) and had weird formatting (i.e. FM1@DTSEC6, FM1@TGEC1). The legacy code is left unchanged in this respect. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
1c710187 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: separate receive buffer free code Move the receive buffer free code in a separate function. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
8313cb02 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: change init_phy() param Change the init_phy() parameter to simplify the code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
f10643cf |
|
19-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: core: Access device ofnode through functions At present ofnode is present in the device even if it is never used. With of-platdata this field is not used, so can be removed. In preparation for this, change the access to go through inline functions. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
0fd3d911 |
|
22-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: Use access methods for dev/uclass private data Most drivers use these access methods but a few do not. Update them. In some cases the access is not permitted, so mark those with a FIXME tag for the maintainer to check. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Pratyush Yadav <p.yadav@ti.com>
|
#
c69cda25 |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename dev_get_platdata() to dev_get_plat() Rename this to be consistent with the change from 'platdata'. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
caa4daa2 |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename 'platdata' variables to just 'plat' We use 'priv' for private data but often use 'platdata' for platform data. We can't really use 'pdata' since that is ambiguous (it could mean private or platform data). Rename some of the latter variables to end with 'plat' for consistency. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
41575d8e |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename auto_alloc_size members to be shorter This construct is quite long-winded. In earlier days it made some sense since auto-allocation was a strange concept. But with driver model now used pretty universally, we can shorten this to 'auto'. This reduces verbosity and makes it easier to read. Coincidentally it also ensures that every declaration is on one line, thus making dtoc's job easier. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
9b2e892e |
|
04-May-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: minor fix in DM ETH support Bus callback functions for read/write/reset need to be set only for DM_ETH, moving endif a bit lower. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f7ae49fc |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop log.h from common header Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e6f6f9e6 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop part.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
6eb32a03 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: add DM ETH support Probe the FMan MACs based on the device tree while retaining the legacy code/functionality. One notable change introduced here is that, for DM_ETH, the name of the interfaces is corrected to the fmX-macY format, that avoids the referral to the MAC block names which were incorrect for FMan v3 devices (i.e. DTSEC, TGEC) and had weird formatting (i.e. FM1@DTSEC6, FM1@TGEC1). The legacy code is left unchanged in this respect. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
1c710187 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: separate receive buffer free code Move the receive buffer free code in a separate function. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
8313cb02 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: change init_phy() param Change the init_phy() parameter to simplify the code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
f10643cf |
|
19-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: core: Access device ofnode through functions At present ofnode is present in the device even if it is never used. With of-platdata this field is not used, so can be removed. In preparation for this, change the access to go through inline functions. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
0fd3d911 |
|
22-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: Use access methods for dev/uclass private data Most drivers use these access methods but a few do not. Update them. In some cases the access is not permitted, so mark those with a FIXME tag for the maintainer to check. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Pratyush Yadav <p.yadav@ti.com>
|
#
c69cda25 |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename dev_get_platdata() to dev_get_plat() Rename this to be consistent with the change from 'platdata'. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
caa4daa2 |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename 'platdata' variables to just 'plat' We use 'priv' for private data but often use 'platdata' for platform data. We can't really use 'pdata' since that is ambiguous (it could mean private or platform data). Rename some of the latter variables to end with 'plat' for consistency. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
41575d8e |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename auto_alloc_size members to be shorter This construct is quite long-winded. In earlier days it made some sense since auto-allocation was a strange concept. But with driver model now used pretty universally, we can shorten this to 'auto'. This reduces verbosity and makes it easier to read. Coincidentally it also ensures that every declaration is on one line, thus making dtoc's job easier. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
9b2e892e |
|
04-May-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: minor fix in DM ETH support Bus callback functions for read/write/reset need to be set only for DM_ETH, moving endif a bit lower. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f7ae49fc |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop log.h from common header Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e6f6f9e6 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop part.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
6eb32a03 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: add DM ETH support Probe the FMan MACs based on the device tree while retaining the legacy code/functionality. One notable change introduced here is that, for DM_ETH, the name of the interfaces is corrected to the fmX-macY format, that avoids the referral to the MAC block names which were incorrect for FMan v3 devices (i.e. DTSEC, TGEC) and had weird formatting (i.e. FM1@DTSEC6, FM1@TGEC1). The legacy code is left unchanged in this respect. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
1c710187 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: separate receive buffer free code Move the receive buffer free code in a separate function. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
8313cb02 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: change init_phy() param Change the init_phy() parameter to simplify the code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
f10643cf |
|
19-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: core: Access device ofnode through functions At present ofnode is present in the device even if it is never used. With of-platdata this field is not used, so can be removed. In preparation for this, change the access to go through inline functions. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
0fd3d911 |
|
22-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: Use access methods for dev/uclass private data Most drivers use these access methods but a few do not. Update them. In some cases the access is not permitted, so mark those with a FIXME tag for the maintainer to check. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Pratyush Yadav <p.yadav@ti.com>
|
#
c69cda25 |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename dev_get_platdata() to dev_get_plat() Rename this to be consistent with the change from 'platdata'. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
caa4daa2 |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename 'platdata' variables to just 'plat' We use 'priv' for private data but often use 'platdata' for platform data. We can't really use 'pdata' since that is ambiguous (it could mean private or platform data). Rename some of the latter variables to end with 'plat' for consistency. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
41575d8e |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename auto_alloc_size members to be shorter This construct is quite long-winded. In earlier days it made some sense since auto-allocation was a strange concept. But with driver model now used pretty universally, we can shorten this to 'auto'. This reduces verbosity and makes it easier to read. Coincidentally it also ensures that every declaration is on one line, thus making dtoc's job easier. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
9b2e892e |
|
04-May-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: minor fix in DM ETH support Bus callback functions for read/write/reset need to be set only for DM_ETH, moving endif a bit lower. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f7ae49fc |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop log.h from common header Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e6f6f9e6 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop part.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
6eb32a03 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: add DM ETH support Probe the FMan MACs based on the device tree while retaining the legacy code/functionality. One notable change introduced here is that, for DM_ETH, the name of the interfaces is corrected to the fmX-macY format, that avoids the referral to the MAC block names which were incorrect for FMan v3 devices (i.e. DTSEC, TGEC) and had weird formatting (i.e. FM1@DTSEC6, FM1@TGEC1). The legacy code is left unchanged in this respect. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
1c710187 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: separate receive buffer free code Move the receive buffer free code in a separate function. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
8313cb02 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: change init_phy() param Change the init_phy() parameter to simplify the code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
f10643cf |
|
19-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: core: Access device ofnode through functions At present ofnode is present in the device even if it is never used. With of-platdata this field is not used, so can be removed. In preparation for this, change the access to go through inline functions. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
0fd3d911 |
|
22-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: Use access methods for dev/uclass private data Most drivers use these access methods but a few do not. Update them. In some cases the access is not permitted, so mark those with a FIXME tag for the maintainer to check. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Pratyush Yadav <p.yadav@ti.com>
|
#
c69cda25 |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename dev_get_platdata() to dev_get_plat() Rename this to be consistent with the change from 'platdata'. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
caa4daa2 |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename 'platdata' variables to just 'plat' We use 'priv' for private data but often use 'platdata' for platform data. We can't really use 'pdata' since that is ambiguous (it could mean private or platform data). Rename some of the latter variables to end with 'plat' for consistency. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
41575d8e |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename auto_alloc_size members to be shorter This construct is quite long-winded. In earlier days it made some sense since auto-allocation was a strange concept. But with driver model now used pretty universally, we can shorten this to 'auto'. This reduces verbosity and makes it easier to read. Coincidentally it also ensures that every declaration is on one line, thus making dtoc's job easier. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
9b2e892e |
|
04-May-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: minor fix in DM ETH support Bus callback functions for read/write/reset need to be set only for DM_ETH, moving endif a bit lower. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f7ae49fc |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop log.h from common header Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e6f6f9e6 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop part.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
6eb32a03 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: add DM ETH support Probe the FMan MACs based on the device tree while retaining the legacy code/functionality. One notable change introduced here is that, for DM_ETH, the name of the interfaces is corrected to the fmX-macY format, that avoids the referral to the MAC block names which were incorrect for FMan v3 devices (i.e. DTSEC, TGEC) and had weird formatting (i.e. FM1@DTSEC6, FM1@TGEC1). The legacy code is left unchanged in this respect. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
1c710187 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: separate receive buffer free code Move the receive buffer free code in a separate function. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
8313cb02 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: change init_phy() param Change the init_phy() parameter to simplify the code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
f10643cf |
|
19-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: core: Access device ofnode through functions At present ofnode is present in the device even if it is never used. With of-platdata this field is not used, so can be removed. In preparation for this, change the access to go through inline functions. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
0fd3d911 |
|
22-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: Use access methods for dev/uclass private data Most drivers use these access methods but a few do not. Update them. In some cases the access is not permitted, so mark those with a FIXME tag for the maintainer to check. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Pratyush Yadav <p.yadav@ti.com>
|
#
c69cda25 |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename dev_get_platdata() to dev_get_plat() Rename this to be consistent with the change from 'platdata'. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
caa4daa2 |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename 'platdata' variables to just 'plat' We use 'priv' for private data but often use 'platdata' for platform data. We can't really use 'pdata' since that is ambiguous (it could mean private or platform data). Rename some of the latter variables to end with 'plat' for consistency. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
41575d8e |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename auto_alloc_size members to be shorter This construct is quite long-winded. In earlier days it made some sense since auto-allocation was a strange concept. But with driver model now used pretty universally, we can shorten this to 'auto'. This reduces verbosity and makes it easier to read. Coincidentally it also ensures that every declaration is on one line, thus making dtoc's job easier. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
9b2e892e |
|
04-May-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: minor fix in DM ETH support Bus callback functions for read/write/reset need to be set only for DM_ETH, moving endif a bit lower. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f7ae49fc |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop log.h from common header Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e6f6f9e6 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop part.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
6eb32a03 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: add DM ETH support Probe the FMan MACs based on the device tree while retaining the legacy code/functionality. One notable change introduced here is that, for DM_ETH, the name of the interfaces is corrected to the fmX-macY format, that avoids the referral to the MAC block names which were incorrect for FMan v3 devices (i.e. DTSEC, TGEC) and had weird formatting (i.e. FM1@DTSEC6, FM1@TGEC1). The legacy code is left unchanged in this respect. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
1c710187 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: separate receive buffer free code Move the receive buffer free code in a separate function. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
8313cb02 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: change init_phy() param Change the init_phy() parameter to simplify the code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
f10643cf |
|
19-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: core: Access device ofnode through functions At present ofnode is present in the device even if it is never used. With of-platdata this field is not used, so can be removed. In preparation for this, change the access to go through inline functions. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
0fd3d911 |
|
22-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: Use access methods for dev/uclass private data Most drivers use these access methods but a few do not. Update them. In some cases the access is not permitted, so mark those with a FIXME tag for the maintainer to check. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Pratyush Yadav <p.yadav@ti.com>
|
#
c69cda25 |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename dev_get_platdata() to dev_get_plat() Rename this to be consistent with the change from 'platdata'. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
caa4daa2 |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename 'platdata' variables to just 'plat' We use 'priv' for private data but often use 'platdata' for platform data. We can't really use 'pdata' since that is ambiguous (it could mean private or platform data). Rename some of the latter variables to end with 'plat' for consistency. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
41575d8e |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename auto_alloc_size members to be shorter This construct is quite long-winded. In earlier days it made some sense since auto-allocation was a strange concept. But with driver model now used pretty universally, we can shorten this to 'auto'. This reduces verbosity and makes it easier to read. Coincidentally it also ensures that every declaration is on one line, thus making dtoc's job easier. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
9b2e892e |
|
04-May-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: minor fix in DM ETH support Bus callback functions for read/write/reset need to be set only for DM_ETH, moving endif a bit lower. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f7ae49fc |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop log.h from common header Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e6f6f9e6 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop part.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
6eb32a03 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: add DM ETH support Probe the FMan MACs based on the device tree while retaining the legacy code/functionality. One notable change introduced here is that, for DM_ETH, the name of the interfaces is corrected to the fmX-macY format, that avoids the referral to the MAC block names which were incorrect for FMan v3 devices (i.e. DTSEC, TGEC) and had weird formatting (i.e. FM1@DTSEC6, FM1@TGEC1). The legacy code is left unchanged in this respect. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
1c710187 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: separate receive buffer free code Move the receive buffer free code in a separate function. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
8313cb02 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: change init_phy() param Change the init_phy() parameter to simplify the code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
f10643cf |
|
19-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: core: Access device ofnode through functions At present ofnode is present in the device even if it is never used. With of-platdata this field is not used, so can be removed. In preparation for this, change the access to go through inline functions. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
0fd3d911 |
|
22-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: Use access methods for dev/uclass private data Most drivers use these access methods but a few do not. Update them. In some cases the access is not permitted, so mark those with a FIXME tag for the maintainer to check. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Pratyush Yadav <p.yadav@ti.com>
|
#
c69cda25 |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename dev_get_platdata() to dev_get_plat() Rename this to be consistent with the change from 'platdata'. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
caa4daa2 |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename 'platdata' variables to just 'plat' We use 'priv' for private data but often use 'platdata' for platform data. We can't really use 'pdata' since that is ambiguous (it could mean private or platform data). Rename some of the latter variables to end with 'plat' for consistency. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
41575d8e |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename auto_alloc_size members to be shorter This construct is quite long-winded. In earlier days it made some sense since auto-allocation was a strange concept. But with driver model now used pretty universally, we can shorten this to 'auto'. This reduces verbosity and makes it easier to read. Coincidentally it also ensures that every declaration is on one line, thus making dtoc's job easier. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
9b2e892e |
|
04-May-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: minor fix in DM ETH support Bus callback functions for read/write/reset need to be set only for DM_ETH, moving endif a bit lower. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f7ae49fc |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop log.h from common header Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e6f6f9e6 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop part.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
6eb32a03 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: add DM ETH support Probe the FMan MACs based on the device tree while retaining the legacy code/functionality. One notable change introduced here is that, for DM_ETH, the name of the interfaces is corrected to the fmX-macY format, that avoids the referral to the MAC block names which were incorrect for FMan v3 devices (i.e. DTSEC, TGEC) and had weird formatting (i.e. FM1@DTSEC6, FM1@TGEC1). The legacy code is left unchanged in this respect. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
1c710187 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: separate receive buffer free code Move the receive buffer free code in a separate function. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
8313cb02 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: change init_phy() param Change the init_phy() parameter to simplify the code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
f10643cf |
|
19-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: core: Access device ofnode through functions At present ofnode is present in the device even if it is never used. With of-platdata this field is not used, so can be removed. In preparation for this, change the access to go through inline functions. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
0fd3d911 |
|
22-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: Use access methods for dev/uclass private data Most drivers use these access methods but a few do not. Update them. In some cases the access is not permitted, so mark those with a FIXME tag for the maintainer to check. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Pratyush Yadav <p.yadav@ti.com>
|
#
c69cda25 |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename dev_get_platdata() to dev_get_plat() Rename this to be consistent with the change from 'platdata'. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
caa4daa2 |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename 'platdata' variables to just 'plat' We use 'priv' for private data but often use 'platdata' for platform data. We can't really use 'pdata' since that is ambiguous (it could mean private or platform data). Rename some of the latter variables to end with 'plat' for consistency. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
41575d8e |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename auto_alloc_size members to be shorter This construct is quite long-winded. In earlier days it made some sense since auto-allocation was a strange concept. But with driver model now used pretty universally, we can shorten this to 'auto'. This reduces verbosity and makes it easier to read. Coincidentally it also ensures that every declaration is on one line, thus making dtoc's job easier. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
9b2e892e |
|
04-May-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: minor fix in DM ETH support Bus callback functions for read/write/reset need to be set only for DM_ETH, moving endif a bit lower. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f7ae49fc |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop log.h from common header Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e6f6f9e6 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop part.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
6eb32a03 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: add DM ETH support Probe the FMan MACs based on the device tree while retaining the legacy code/functionality. One notable change introduced here is that, for DM_ETH, the name of the interfaces is corrected to the fmX-macY format, that avoids the referral to the MAC block names which were incorrect for FMan v3 devices (i.e. DTSEC, TGEC) and had weird formatting (i.e. FM1@DTSEC6, FM1@TGEC1). The legacy code is left unchanged in this respect. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
1c710187 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: separate receive buffer free code Move the receive buffer free code in a separate function. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
8313cb02 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: change init_phy() param Change the init_phy() parameter to simplify the code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
9b2e892e |
|
04-May-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: minor fix in DM ETH support Bus callback functions for read/write/reset need to be set only for DM_ETH, moving endif a bit lower. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f7ae49fc |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop log.h from common header Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e6f6f9e6 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop part.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
6eb32a03 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: add DM ETH support Probe the FMan MACs based on the device tree while retaining the legacy code/functionality. One notable change introduced here is that, for DM_ETH, the name of the interfaces is corrected to the fmX-macY format, that avoids the referral to the MAC block names which were incorrect for FMan v3 devices (i.e. DTSEC, TGEC) and had weird formatting (i.e. FM1@DTSEC6, FM1@TGEC1). The legacy code is left unchanged in this respect. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
1c710187 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: separate receive buffer free code Move the receive buffer free code in a separate function. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
8313cb02 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: change init_phy() param Change the init_phy() parameter to simplify the code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
9b2e892e |
|
04-May-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: minor fix in DM ETH support Bus callback functions for read/write/reset need to be set only for DM_ETH, moving endif a bit lower. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f7ae49fc |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop log.h from common header Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e6f6f9e6 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop part.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
6eb32a03 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: add DM ETH support Probe the FMan MACs based on the device tree while retaining the legacy code/functionality. One notable change introduced here is that, for DM_ETH, the name of the interfaces is corrected to the fmX-macY format, that avoids the referral to the MAC block names which were incorrect for FMan v3 devices (i.e. DTSEC, TGEC) and had weird formatting (i.e. FM1@DTSEC6, FM1@TGEC1). The legacy code is left unchanged in this respect. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
1c710187 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: separate receive buffer free code Move the receive buffer free code in a separate function. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
8313cb02 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: change init_phy() param Change the init_phy() parameter to simplify the code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
9b2e892e |
|
04-May-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: minor fix in DM ETH support Bus callback functions for read/write/reset need to be set only for DM_ETH, moving endif a bit lower. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f7ae49fc |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop log.h from common header Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e6f6f9e6 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop part.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
6eb32a03 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: add DM ETH support Probe the FMan MACs based on the device tree while retaining the legacy code/functionality. One notable change introduced here is that, for DM_ETH, the name of the interfaces is corrected to the fmX-macY format, that avoids the referral to the MAC block names which were incorrect for FMan v3 devices (i.e. DTSEC, TGEC) and had weird formatting (i.e. FM1@DTSEC6, FM1@TGEC1). The legacy code is left unchanged in this respect. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
1c710187 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: separate receive buffer free code Move the receive buffer free code in a separate function. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
8313cb02 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: change init_phy() param Change the init_phy() parameter to simplify the code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
9b2e892e |
|
04-May-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: minor fix in DM ETH support Bus callback functions for read/write/reset need to be set only for DM_ETH, moving endif a bit lower. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f7ae49fc |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop log.h from common header Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e6f6f9e6 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop part.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
6eb32a03 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: add DM ETH support Probe the FMan MACs based on the device tree while retaining the legacy code/functionality. One notable change introduced here is that, for DM_ETH, the name of the interfaces is corrected to the fmX-macY format, that avoids the referral to the MAC block names which were incorrect for FMan v3 devices (i.e. DTSEC, TGEC) and had weird formatting (i.e. FM1@DTSEC6, FM1@TGEC1). The legacy code is left unchanged in this respect. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
1c710187 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: separate receive buffer free code Move the receive buffer free code in a separate function. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
8313cb02 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: change init_phy() param Change the init_phy() parameter to simplify the code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
9b2e892e |
|
04-May-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: minor fix in DM ETH support Bus callback functions for read/write/reset need to be set only for DM_ETH, moving endif a bit lower. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f7ae49fc |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop log.h from common header Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e6f6f9e6 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop part.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
6eb32a03 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: add DM ETH support Probe the FMan MACs based on the device tree while retaining the legacy code/functionality. One notable change introduced here is that, for DM_ETH, the name of the interfaces is corrected to the fmX-macY format, that avoids the referral to the MAC block names which were incorrect for FMan v3 devices (i.e. DTSEC, TGEC) and had weird formatting (i.e. FM1@DTSEC6, FM1@TGEC1). The legacy code is left unchanged in this respect. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
1c710187 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: separate receive buffer free code Move the receive buffer free code in a separate function. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
8313cb02 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: change init_phy() param Change the init_phy() parameter to simplify the code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
9b2e892e |
|
04-May-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: minor fix in DM ETH support Bus callback functions for read/write/reset need to be set only for DM_ETH, moving endif a bit lower. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f7ae49fc |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop log.h from common header Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e6f6f9e6 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop part.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
6eb32a03 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: add DM ETH support Probe the FMan MACs based on the device tree while retaining the legacy code/functionality. One notable change introduced here is that, for DM_ETH, the name of the interfaces is corrected to the fmX-macY format, that avoids the referral to the MAC block names which were incorrect for FMan v3 devices (i.e. DTSEC, TGEC) and had weird formatting (i.e. FM1@DTSEC6, FM1@TGEC1). The legacy code is left unchanged in this respect. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
1c710187 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: separate receive buffer free code Move the receive buffer free code in a separate function. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
8313cb02 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: change init_phy() param Change the init_phy() parameter to simplify the code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
9b2e892e |
|
04-May-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: minor fix in DM ETH support Bus callback functions for read/write/reset need to be set only for DM_ETH, moving endif a bit lower. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f7ae49fc |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop log.h from common header Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e6f6f9e6 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop part.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
6eb32a03 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: add DM ETH support Probe the FMan MACs based on the device tree while retaining the legacy code/functionality. One notable change introduced here is that, for DM_ETH, the name of the interfaces is corrected to the fmX-macY format, that avoids the referral to the MAC block names which were incorrect for FMan v3 devices (i.e. DTSEC, TGEC) and had weird formatting (i.e. FM1@DTSEC6, FM1@TGEC1). The legacy code is left unchanged in this respect. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
1c710187 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: separate receive buffer free code Move the receive buffer free code in a separate function. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
8313cb02 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: change init_phy() param Change the init_phy() parameter to simplify the code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
9b2e892e |
|
04-May-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: minor fix in DM ETH support Bus callback functions for read/write/reset need to be set only for DM_ETH, moving endif a bit lower. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f7ae49fc |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop log.h from common header Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e6f6f9e6 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop part.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
6eb32a03 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: add DM ETH support Probe the FMan MACs based on the device tree while retaining the legacy code/functionality. One notable change introduced here is that, for DM_ETH, the name of the interfaces is corrected to the fmX-macY format, that avoids the referral to the MAC block names which were incorrect for FMan v3 devices (i.e. DTSEC, TGEC) and had weird formatting (i.e. FM1@DTSEC6, FM1@TGEC1). The legacy code is left unchanged in this respect. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
1c710187 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: separate receive buffer free code Move the receive buffer free code in a separate function. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
8313cb02 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: change init_phy() param Change the init_phy() parameter to simplify the code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
9b2e892e |
|
04-May-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: minor fix in DM ETH support Bus callback functions for read/write/reset need to be set only for DM_ETH, moving endif a bit lower. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f7ae49fc |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop log.h from common header Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e6f6f9e6 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop part.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
6eb32a03 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: add DM ETH support Probe the FMan MACs based on the device tree while retaining the legacy code/functionality. One notable change introduced here is that, for DM_ETH, the name of the interfaces is corrected to the fmX-macY format, that avoids the referral to the MAC block names which were incorrect for FMan v3 devices (i.e. DTSEC, TGEC) and had weird formatting (i.e. FM1@DTSEC6, FM1@TGEC1). The legacy code is left unchanged in this respect. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
1c710187 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: separate receive buffer free code Move the receive buffer free code in a separate function. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
8313cb02 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: change init_phy() param Change the init_phy() parameter to simplify the code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
9b2e892e |
|
04-May-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: minor fix in DM ETH support Bus callback functions for read/write/reset need to be set only for DM_ETH, moving endif a bit lower. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f7ae49fc |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop log.h from common header Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e6f6f9e6 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop part.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
6eb32a03 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: add DM ETH support Probe the FMan MACs based on the device tree while retaining the legacy code/functionality. One notable change introduced here is that, for DM_ETH, the name of the interfaces is corrected to the fmX-macY format, that avoids the referral to the MAC block names which were incorrect for FMan v3 devices (i.e. DTSEC, TGEC) and had weird formatting (i.e. FM1@DTSEC6, FM1@TGEC1). The legacy code is left unchanged in this respect. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
1c710187 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: separate receive buffer free code Move the receive buffer free code in a separate function. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
8313cb02 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: change init_phy() param Change the init_phy() parameter to simplify the code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
9b2e892e |
|
04-May-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: minor fix in DM ETH support Bus callback functions for read/write/reset need to be set only for DM_ETH, moving endif a bit lower. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f7ae49fc |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop log.h from common header Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e6f6f9e6 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop part.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
6eb32a03 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: add DM ETH support Probe the FMan MACs based on the device tree while retaining the legacy code/functionality. One notable change introduced here is that, for DM_ETH, the name of the interfaces is corrected to the fmX-macY format, that avoids the referral to the MAC block names which were incorrect for FMan v3 devices (i.e. DTSEC, TGEC) and had weird formatting (i.e. FM1@DTSEC6, FM1@TGEC1). The legacy code is left unchanged in this respect. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
1c710187 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: separate receive buffer free code Move the receive buffer free code in a separate function. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
8313cb02 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: change init_phy() param Change the init_phy() parameter to simplify the code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
9b2e892e |
|
04-May-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: minor fix in DM ETH support Bus callback functions for read/write/reset need to be set only for DM_ETH, moving endif a bit lower. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f7ae49fc |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop log.h from common header Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e6f6f9e6 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop part.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
6eb32a03 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: add DM ETH support Probe the FMan MACs based on the device tree while retaining the legacy code/functionality. One notable change introduced here is that, for DM_ETH, the name of the interfaces is corrected to the fmX-macY format, that avoids the referral to the MAC block names which were incorrect for FMan v3 devices (i.e. DTSEC, TGEC) and had weird formatting (i.e. FM1@DTSEC6, FM1@TGEC1). The legacy code is left unchanged in this respect. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
1c710187 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: separate receive buffer free code Move the receive buffer free code in a separate function. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
8313cb02 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: change init_phy() param Change the init_phy() parameter to simplify the code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
9b2e892e |
|
04-May-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: minor fix in DM ETH support Bus callback functions for read/write/reset need to be set only for DM_ETH, moving endif a bit lower. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f7ae49fc |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop log.h from common header Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e6f6f9e6 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop part.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
6eb32a03 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: add DM ETH support Probe the FMan MACs based on the device tree while retaining the legacy code/functionality. One notable change introduced here is that, for DM_ETH, the name of the interfaces is corrected to the fmX-macY format, that avoids the referral to the MAC block names which were incorrect for FMan v3 devices (i.e. DTSEC, TGEC) and had weird formatting (i.e. FM1@DTSEC6, FM1@TGEC1). The legacy code is left unchanged in this respect. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
1c710187 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: separate receive buffer free code Move the receive buffer free code in a separate function. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
8313cb02 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: change init_phy() param Change the init_phy() parameter to simplify the code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
9b2e892e |
|
04-May-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: minor fix in DM ETH support Bus callback functions for read/write/reset need to be set only for DM_ETH, moving endif a bit lower. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f7ae49fc |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop log.h from common header Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e6f6f9e6 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop part.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
6eb32a03 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: add DM ETH support Probe the FMan MACs based on the device tree while retaining the legacy code/functionality. One notable change introduced here is that, for DM_ETH, the name of the interfaces is corrected to the fmX-macY format, that avoids the referral to the MAC block names which were incorrect for FMan v3 devices (i.e. DTSEC, TGEC) and had weird formatting (i.e. FM1@DTSEC6, FM1@TGEC1). The legacy code is left unchanged in this respect. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
1c710187 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: separate receive buffer free code Move the receive buffer free code in a separate function. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
8313cb02 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: change init_phy() param Change the init_phy() parameter to simplify the code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
9b2e892e |
|
04-May-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: minor fix in DM ETH support Bus callback functions for read/write/reset need to be set only for DM_ETH, moving endif a bit lower. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f7ae49fc |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop log.h from common header Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e6f6f9e6 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop part.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
6eb32a03 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: add DM ETH support Probe the FMan MACs based on the device tree while retaining the legacy code/functionality. One notable change introduced here is that, for DM_ETH, the name of the interfaces is corrected to the fmX-macY format, that avoids the referral to the MAC block names which were incorrect for FMan v3 devices (i.e. DTSEC, TGEC) and had weird formatting (i.e. FM1@DTSEC6, FM1@TGEC1). The legacy code is left unchanged in this respect. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
1c710187 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: separate receive buffer free code Move the receive buffer free code in a separate function. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
8313cb02 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: change init_phy() param Change the init_phy() parameter to simplify the code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
9b2e892e |
|
04-May-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: minor fix in DM ETH support Bus callback functions for read/write/reset need to be set only for DM_ETH, moving endif a bit lower. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f7ae49fc |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop log.h from common header Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e6f6f9e6 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop part.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
6eb32a03 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: add DM ETH support Probe the FMan MACs based on the device tree while retaining the legacy code/functionality. One notable change introduced here is that, for DM_ETH, the name of the interfaces is corrected to the fmX-macY format, that avoids the referral to the MAC block names which were incorrect for FMan v3 devices (i.e. DTSEC, TGEC) and had weird formatting (i.e. FM1@DTSEC6, FM1@TGEC1). The legacy code is left unchanged in this respect. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
1c710187 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: separate receive buffer free code Move the receive buffer free code in a separate function. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
8313cb02 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: change init_phy() param Change the init_phy() parameter to simplify the code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
9b2e892e |
|
04-May-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: minor fix in DM ETH support Bus callback functions for read/write/reset need to be set only for DM_ETH, moving endif a bit lower. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f7ae49fc |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop log.h from common header Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e6f6f9e6 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop part.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
6eb32a03 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: add DM ETH support Probe the FMan MACs based on the device tree while retaining the legacy code/functionality. One notable change introduced here is that, for DM_ETH, the name of the interfaces is corrected to the fmX-macY format, that avoids the referral to the MAC block names which were incorrect for FMan v3 devices (i.e. DTSEC, TGEC) and had weird formatting (i.e. FM1@DTSEC6, FM1@TGEC1). The legacy code is left unchanged in this respect. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
1c710187 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: separate receive buffer free code Move the receive buffer free code in a separate function. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
8313cb02 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: change init_phy() param Change the init_phy() parameter to simplify the code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
9b2e892e |
|
04-May-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: minor fix in DM ETH support Bus callback functions for read/write/reset need to be set only for DM_ETH, moving endif a bit lower. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f7ae49fc |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop log.h from common header Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e6f6f9e6 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop part.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
6eb32a03 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: add DM ETH support Probe the FMan MACs based on the device tree while retaining the legacy code/functionality. One notable change introduced here is that, for DM_ETH, the name of the interfaces is corrected to the fmX-macY format, that avoids the referral to the MAC block names which were incorrect for FMan v3 devices (i.e. DTSEC, TGEC) and had weird formatting (i.e. FM1@DTSEC6, FM1@TGEC1). The legacy code is left unchanged in this respect. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
1c710187 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: separate receive buffer free code Move the receive buffer free code in a separate function. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
8313cb02 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: change init_phy() param Change the init_phy() parameter to simplify the code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
9b2e892e |
|
04-May-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: minor fix in DM ETH support Bus callback functions for read/write/reset need to be set only for DM_ETH, moving endif a bit lower. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f7ae49fc |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop log.h from common header Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e6f6f9e6 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop part.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
6eb32a03 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: add DM ETH support Probe the FMan MACs based on the device tree while retaining the legacy code/functionality. One notable change introduced here is that, for DM_ETH, the name of the interfaces is corrected to the fmX-macY format, that avoids the referral to the MAC block names which were incorrect for FMan v3 devices (i.e. DTSEC, TGEC) and had weird formatting (i.e. FM1@DTSEC6, FM1@TGEC1). The legacy code is left unchanged in this respect. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
1c710187 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: separate receive buffer free code Move the receive buffer free code in a separate function. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
8313cb02 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: change init_phy() param Change the init_phy() parameter to simplify the code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
9b2e892e |
|
04-May-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: minor fix in DM ETH support Bus callback functions for read/write/reset need to be set only for DM_ETH, moving endif a bit lower. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f7ae49fc |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop log.h from common header Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e6f6f9e6 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop part.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
6eb32a03 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: add DM ETH support Probe the FMan MACs based on the device tree while retaining the legacy code/functionality. One notable change introduced here is that, for DM_ETH, the name of the interfaces is corrected to the fmX-macY format, that avoids the referral to the MAC block names which were incorrect for FMan v3 devices (i.e. DTSEC, TGEC) and had weird formatting (i.e. FM1@DTSEC6, FM1@TGEC1). The legacy code is left unchanged in this respect. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
1c710187 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: separate receive buffer free code Move the receive buffer free code in a separate function. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
8313cb02 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: change init_phy() param Change the init_phy() parameter to simplify the code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
9b2e892e |
|
04-May-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: minor fix in DM ETH support Bus callback functions for read/write/reset need to be set only for DM_ETH, moving endif a bit lower. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f7ae49fc |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop log.h from common header Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e6f6f9e6 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop part.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
6eb32a03 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: add DM ETH support Probe the FMan MACs based on the device tree while retaining the legacy code/functionality. One notable change introduced here is that, for DM_ETH, the name of the interfaces is corrected to the fmX-macY format, that avoids the referral to the MAC block names which were incorrect for FMan v3 devices (i.e. DTSEC, TGEC) and had weird formatting (i.e. FM1@DTSEC6, FM1@TGEC1). The legacy code is left unchanged in this respect. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
1c710187 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: separate receive buffer free code Move the receive buffer free code in a separate function. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
8313cb02 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: change init_phy() param Change the init_phy() parameter to simplify the code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
9b2e892e |
|
04-May-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: minor fix in DM ETH support Bus callback functions for read/write/reset need to be set only for DM_ETH, moving endif a bit lower. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f7ae49fc |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop log.h from common header Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e6f6f9e6 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop part.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
6eb32a03 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: add DM ETH support Probe the FMan MACs based on the device tree while retaining the legacy code/functionality. One notable change introduced here is that, for DM_ETH, the name of the interfaces is corrected to the fmX-macY format, that avoids the referral to the MAC block names which were incorrect for FMan v3 devices (i.e. DTSEC, TGEC) and had weird formatting (i.e. FM1@DTSEC6, FM1@TGEC1). The legacy code is left unchanged in this respect. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
1c710187 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: separate receive buffer free code Move the receive buffer free code in a separate function. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
8313cb02 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: change init_phy() param Change the init_phy() parameter to simplify the code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
9b2e892e |
|
04-May-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: minor fix in DM ETH support Bus callback functions for read/write/reset need to be set only for DM_ETH, moving endif a bit lower. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f7ae49fc |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop log.h from common header Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e6f6f9e6 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop part.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
6eb32a03 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: add DM ETH support Probe the FMan MACs based on the device tree while retaining the legacy code/functionality. One notable change introduced here is that, for DM_ETH, the name of the interfaces is corrected to the fmX-macY format, that avoids the referral to the MAC block names which were incorrect for FMan v3 devices (i.e. DTSEC, TGEC) and had weird formatting (i.e. FM1@DTSEC6, FM1@TGEC1). The legacy code is left unchanged in this respect. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
1c710187 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: separate receive buffer free code Move the receive buffer free code in a separate function. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
8313cb02 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: change init_phy() param Change the init_phy() parameter to simplify the code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
9b2e892e |
|
04-May-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: minor fix in DM ETH support Bus callback functions for read/write/reset need to be set only for DM_ETH, moving endif a bit lower. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f7ae49fc |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop log.h from common header Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e6f6f9e6 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop part.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
6eb32a03 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: add DM ETH support Probe the FMan MACs based on the device tree while retaining the legacy code/functionality. One notable change introduced here is that, for DM_ETH, the name of the interfaces is corrected to the fmX-macY format, that avoids the referral to the MAC block names which were incorrect for FMan v3 devices (i.e. DTSEC, TGEC) and had weird formatting (i.e. FM1@DTSEC6, FM1@TGEC1). The legacy code is left unchanged in this respect. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
1c710187 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: separate receive buffer free code Move the receive buffer free code in a separate function. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
8313cb02 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: change init_phy() param Change the init_phy() parameter to simplify the code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
9b2e892e |
|
04-May-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: minor fix in DM ETH support Bus callback functions for read/write/reset need to be set only for DM_ETH, moving endif a bit lower. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f7ae49fc |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop log.h from common header Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e6f6f9e6 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop part.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
6eb32a03 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: add DM ETH support Probe the FMan MACs based on the device tree while retaining the legacy code/functionality. One notable change introduced here is that, for DM_ETH, the name of the interfaces is corrected to the fmX-macY format, that avoids the referral to the MAC block names which were incorrect for FMan v3 devices (i.e. DTSEC, TGEC) and had weird formatting (i.e. FM1@DTSEC6, FM1@TGEC1). The legacy code is left unchanged in this respect. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
1c710187 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: separate receive buffer free code Move the receive buffer free code in a separate function. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
8313cb02 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: change init_phy() param Change the init_phy() parameter to simplify the code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
9b2e892e |
|
04-May-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: minor fix in DM ETH support Bus callback functions for read/write/reset need to be set only for DM_ETH, moving endif a bit lower. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f7ae49fc |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop log.h from common header Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e6f6f9e6 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop part.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
6eb32a03 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: add DM ETH support Probe the FMan MACs based on the device tree while retaining the legacy code/functionality. One notable change introduced here is that, for DM_ETH, the name of the interfaces is corrected to the fmX-macY format, that avoids the referral to the MAC block names which were incorrect for FMan v3 devices (i.e. DTSEC, TGEC) and had weird formatting (i.e. FM1@DTSEC6, FM1@TGEC1). The legacy code is left unchanged in this respect. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
1c710187 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: separate receive buffer free code Move the receive buffer free code in a separate function. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
8313cb02 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: change init_phy() param Change the init_phy() parameter to simplify the code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
9b2e892e |
|
04-May-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: minor fix in DM ETH support Bus callback functions for read/write/reset need to be set only for DM_ETH, moving endif a bit lower. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f7ae49fc |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop log.h from common header Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e6f6f9e6 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop part.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
6eb32a03 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: add DM ETH support Probe the FMan MACs based on the device tree while retaining the legacy code/functionality. One notable change introduced here is that, for DM_ETH, the name of the interfaces is corrected to the fmX-macY format, that avoids the referral to the MAC block names which were incorrect for FMan v3 devices (i.e. DTSEC, TGEC) and had weird formatting (i.e. FM1@DTSEC6, FM1@TGEC1). The legacy code is left unchanged in this respect. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
1c710187 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: separate receive buffer free code Move the receive buffer free code in a separate function. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
8313cb02 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: change init_phy() param Change the init_phy() parameter to simplify the code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
9b2e892e |
|
04-May-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: minor fix in DM ETH support Bus callback functions for read/write/reset need to be set only for DM_ETH, moving endif a bit lower. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f7ae49fc |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop log.h from common header Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e6f6f9e6 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop part.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
6eb32a03 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: add DM ETH support Probe the FMan MACs based on the device tree while retaining the legacy code/functionality. One notable change introduced here is that, for DM_ETH, the name of the interfaces is corrected to the fmX-macY format, that avoids the referral to the MAC block names which were incorrect for FMan v3 devices (i.e. DTSEC, TGEC) and had weird formatting (i.e. FM1@DTSEC6, FM1@TGEC1). The legacy code is left unchanged in this respect. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
1c710187 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: separate receive buffer free code Move the receive buffer free code in a separate function. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
8313cb02 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: change init_phy() param Change the init_phy() parameter to simplify the code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
9b2e892e |
|
04-May-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: minor fix in DM ETH support Bus callback functions for read/write/reset need to be set only for DM_ETH, moving endif a bit lower. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f7ae49fc |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop log.h from common header Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e6f6f9e6 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop part.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
6eb32a03 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: add DM ETH support Probe the FMan MACs based on the device tree while retaining the legacy code/functionality. One notable change introduced here is that, for DM_ETH, the name of the interfaces is corrected to the fmX-macY format, that avoids the referral to the MAC block names which were incorrect for FMan v3 devices (i.e. DTSEC, TGEC) and had weird formatting (i.e. FM1@DTSEC6, FM1@TGEC1). The legacy code is left unchanged in this respect. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
1c710187 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: separate receive buffer free code Move the receive buffer free code in a separate function. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
8313cb02 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: change init_phy() param Change the init_phy() parameter to simplify the code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
9b2e892e |
|
04-May-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: minor fix in DM ETH support Bus callback functions for read/write/reset need to be set only for DM_ETH, moving endif a bit lower. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f7ae49fc |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop log.h from common header Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e6f6f9e6 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop part.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
6eb32a03 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: add DM ETH support Probe the FMan MACs based on the device tree while retaining the legacy code/functionality. One notable change introduced here is that, for DM_ETH, the name of the interfaces is corrected to the fmX-macY format, that avoids the referral to the MAC block names which were incorrect for FMan v3 devices (i.e. DTSEC, TGEC) and had weird formatting (i.e. FM1@DTSEC6, FM1@TGEC1). The legacy code is left unchanged in this respect. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
1c710187 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: separate receive buffer free code Move the receive buffer free code in a separate function. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
8313cb02 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: change init_phy() param Change the init_phy() parameter to simplify the code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
9b2e892e |
|
04-May-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: minor fix in DM ETH support Bus callback functions for read/write/reset need to be set only for DM_ETH, moving endif a bit lower. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f7ae49fc |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop log.h from common header Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e6f6f9e6 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop part.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
6eb32a03 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: add DM ETH support Probe the FMan MACs based on the device tree while retaining the legacy code/functionality. One notable change introduced here is that, for DM_ETH, the name of the interfaces is corrected to the fmX-macY format, that avoids the referral to the MAC block names which were incorrect for FMan v3 devices (i.e. DTSEC, TGEC) and had weird formatting (i.e. FM1@DTSEC6, FM1@TGEC1). The legacy code is left unchanged in this respect. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
1c710187 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: separate receive buffer free code Move the receive buffer free code in a separate function. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
8313cb02 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: change init_phy() param Change the init_phy() parameter to simplify the code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
9b2e892e |
|
04-May-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: minor fix in DM ETH support Bus callback functions for read/write/reset need to be set only for DM_ETH, moving endif a bit lower. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f7ae49fc |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop log.h from common header Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e6f6f9e6 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop part.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
6eb32a03 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: add DM ETH support Probe the FMan MACs based on the device tree while retaining the legacy code/functionality. One notable change introduced here is that, for DM_ETH, the name of the interfaces is corrected to the fmX-macY format, that avoids the referral to the MAC block names which were incorrect for FMan v3 devices (i.e. DTSEC, TGEC) and had weird formatting (i.e. FM1@DTSEC6, FM1@TGEC1). The legacy code is left unchanged in this respect. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
1c710187 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: separate receive buffer free code Move the receive buffer free code in a separate function. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
8313cb02 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: change init_phy() param Change the init_phy() parameter to simplify the code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
9b2e892e |
|
04-May-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: minor fix in DM ETH support Bus callback functions for read/write/reset need to be set only for DM_ETH, moving endif a bit lower. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f7ae49fc |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop log.h from common header Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e6f6f9e6 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop part.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
6eb32a03 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: add DM ETH support Probe the FMan MACs based on the device tree while retaining the legacy code/functionality. One notable change introduced here is that, for DM_ETH, the name of the interfaces is corrected to the fmX-macY format, that avoids the referral to the MAC block names which were incorrect for FMan v3 devices (i.e. DTSEC, TGEC) and had weird formatting (i.e. FM1@DTSEC6, FM1@TGEC1). The legacy code is left unchanged in this respect. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
1c710187 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: separate receive buffer free code Move the receive buffer free code in a separate function. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
8313cb02 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: change init_phy() param Change the init_phy() parameter to simplify the code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
9b2e892e |
|
04-May-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: minor fix in DM ETH support Bus callback functions for read/write/reset need to be set only for DM_ETH, moving endif a bit lower. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f7ae49fc |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop log.h from common header Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e6f6f9e6 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop part.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
6eb32a03 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: add DM ETH support Probe the FMan MACs based on the device tree while retaining the legacy code/functionality. One notable change introduced here is that, for DM_ETH, the name of the interfaces is corrected to the fmX-macY format, that avoids the referral to the MAC block names which were incorrect for FMan v3 devices (i.e. DTSEC, TGEC) and had weird formatting (i.e. FM1@DTSEC6, FM1@TGEC1). The legacy code is left unchanged in this respect. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
1c710187 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: separate receive buffer free code Move the receive buffer free code in a separate function. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
8313cb02 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: change init_phy() param Change the init_phy() parameter to simplify the code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
9b2e892e |
|
04-May-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: minor fix in DM ETH support Bus callback functions for read/write/reset need to be set only for DM_ETH, moving endif a bit lower. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f7ae49fc |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop log.h from common header Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e6f6f9e6 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop part.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
6eb32a03 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: add DM ETH support Probe the FMan MACs based on the device tree while retaining the legacy code/functionality. One notable change introduced here is that, for DM_ETH, the name of the interfaces is corrected to the fmX-macY format, that avoids the referral to the MAC block names which were incorrect for FMan v3 devices (i.e. DTSEC, TGEC) and had weird formatting (i.e. FM1@DTSEC6, FM1@TGEC1). The legacy code is left unchanged in this respect. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
1c710187 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: separate receive buffer free code Move the receive buffer free code in a separate function. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
8313cb02 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: change init_phy() param Change the init_phy() parameter to simplify the code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
9b2e892e |
|
04-May-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: minor fix in DM ETH support Bus callback functions for read/write/reset need to be set only for DM_ETH, moving endif a bit lower. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f7ae49fc |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop log.h from common header Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e6f6f9e6 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop part.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
6eb32a03 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: add DM ETH support Probe the FMan MACs based on the device tree while retaining the legacy code/functionality. One notable change introduced here is that, for DM_ETH, the name of the interfaces is corrected to the fmX-macY format, that avoids the referral to the MAC block names which were incorrect for FMan v3 devices (i.e. DTSEC, TGEC) and had weird formatting (i.e. FM1@DTSEC6, FM1@TGEC1). The legacy code is left unchanged in this respect. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
1c710187 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: separate receive buffer free code Move the receive buffer free code in a separate function. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
8313cb02 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: change init_phy() param Change the init_phy() parameter to simplify the code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
9b2e892e |
|
04-May-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: minor fix in DM ETH support Bus callback functions for read/write/reset need to be set only for DM_ETH, moving endif a bit lower. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f7ae49fc |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop log.h from common header Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e6f6f9e6 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop part.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
6eb32a03 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: add DM ETH support Probe the FMan MACs based on the device tree while retaining the legacy code/functionality. One notable change introduced here is that, for DM_ETH, the name of the interfaces is corrected to the fmX-macY format, that avoids the referral to the MAC block names which were incorrect for FMan v3 devices (i.e. DTSEC, TGEC) and had weird formatting (i.e. FM1@DTSEC6, FM1@TGEC1). The legacy code is left unchanged in this respect. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
1c710187 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: separate receive buffer free code Move the receive buffer free code in a separate function. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
8313cb02 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: change init_phy() param Change the init_phy() parameter to simplify the code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
9b2e892e |
|
04-May-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: minor fix in DM ETH support Bus callback functions for read/write/reset need to be set only for DM_ETH, moving endif a bit lower. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f7ae49fc |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop log.h from common header Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e6f6f9e6 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop part.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
6eb32a03 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: add DM ETH support Probe the FMan MACs based on the device tree while retaining the legacy code/functionality. One notable change introduced here is that, for DM_ETH, the name of the interfaces is corrected to the fmX-macY format, that avoids the referral to the MAC block names which were incorrect for FMan v3 devices (i.e. DTSEC, TGEC) and had weird formatting (i.e. FM1@DTSEC6, FM1@TGEC1). The legacy code is left unchanged in this respect. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
1c710187 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: separate receive buffer free code Move the receive buffer free code in a separate function. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
8313cb02 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: change init_phy() param Change the init_phy() parameter to simplify the code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
9b2e892e |
|
04-May-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: minor fix in DM ETH support Bus callback functions for read/write/reset need to be set only for DM_ETH, moving endif a bit lower. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f7ae49fc |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop log.h from common header Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e6f6f9e6 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop part.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
6eb32a03 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: add DM ETH support Probe the FMan MACs based on the device tree while retaining the legacy code/functionality. One notable change introduced here is that, for DM_ETH, the name of the interfaces is corrected to the fmX-macY format, that avoids the referral to the MAC block names which were incorrect for FMan v3 devices (i.e. DTSEC, TGEC) and had weird formatting (i.e. FM1@DTSEC6, FM1@TGEC1). The legacy code is left unchanged in this respect. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
1c710187 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: separate receive buffer free code Move the receive buffer free code in a separate function. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
8313cb02 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: change init_phy() param Change the init_phy() parameter to simplify the code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
9b2e892e |
|
04-May-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: minor fix in DM ETH support Bus callback functions for read/write/reset need to be set only for DM_ETH, moving endif a bit lower. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f7ae49fc |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop log.h from common header Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e6f6f9e6 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop part.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
6eb32a03 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: add DM ETH support Probe the FMan MACs based on the device tree while retaining the legacy code/functionality. One notable change introduced here is that, for DM_ETH, the name of the interfaces is corrected to the fmX-macY format, that avoids the referral to the MAC block names which were incorrect for FMan v3 devices (i.e. DTSEC, TGEC) and had weird formatting (i.e. FM1@DTSEC6, FM1@TGEC1). The legacy code is left unchanged in this respect. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
1c710187 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: separate receive buffer free code Move the receive buffer free code in a separate function. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
8313cb02 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: change init_phy() param Change the init_phy() parameter to simplify the code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
9b2e892e |
|
04-May-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: minor fix in DM ETH support Bus callback functions for read/write/reset need to be set only for DM_ETH, moving endif a bit lower. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f7ae49fc |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop log.h from common header Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e6f6f9e6 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop part.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
6eb32a03 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: add DM ETH support Probe the FMan MACs based on the device tree while retaining the legacy code/functionality. One notable change introduced here is that, for DM_ETH, the name of the interfaces is corrected to the fmX-macY format, that avoids the referral to the MAC block names which were incorrect for FMan v3 devices (i.e. DTSEC, TGEC) and had weird formatting (i.e. FM1@DTSEC6, FM1@TGEC1). The legacy code is left unchanged in this respect. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
1c710187 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: separate receive buffer free code Move the receive buffer free code in a separate function. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
8313cb02 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: change init_phy() param Change the init_phy() parameter to simplify the code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
9b2e892e |
|
04-May-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: minor fix in DM ETH support Bus callback functions for read/write/reset need to be set only for DM_ETH, moving endif a bit lower. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f7ae49fc |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop log.h from common header Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e6f6f9e6 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop part.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
6eb32a03 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: add DM ETH support Probe the FMan MACs based on the device tree while retaining the legacy code/functionality. One notable change introduced here is that, for DM_ETH, the name of the interfaces is corrected to the fmX-macY format, that avoids the referral to the MAC block names which were incorrect for FMan v3 devices (i.e. DTSEC, TGEC) and had weird formatting (i.e. FM1@DTSEC6, FM1@TGEC1). The legacy code is left unchanged in this respect. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
1c710187 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: separate receive buffer free code Move the receive buffer free code in a separate function. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
8313cb02 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: change init_phy() param Change the init_phy() parameter to simplify the code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
9b2e892e |
|
04-May-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: minor fix in DM ETH support Bus callback functions for read/write/reset need to be set only for DM_ETH, moving endif a bit lower. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f7ae49fc |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop log.h from common header Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e6f6f9e6 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop part.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
6eb32a03 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: add DM ETH support Probe the FMan MACs based on the device tree while retaining the legacy code/functionality. One notable change introduced here is that, for DM_ETH, the name of the interfaces is corrected to the fmX-macY format, that avoids the referral to the MAC block names which were incorrect for FMan v3 devices (i.e. DTSEC, TGEC) and had weird formatting (i.e. FM1@DTSEC6, FM1@TGEC1). The legacy code is left unchanged in this respect. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
1c710187 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: separate receive buffer free code Move the receive buffer free code in a separate function. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
8313cb02 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: change init_phy() param Change the init_phy() parameter to simplify the code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
9b2e892e |
|
04-May-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: minor fix in DM ETH support Bus callback functions for read/write/reset need to be set only for DM_ETH, moving endif a bit lower. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f7ae49fc |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop log.h from common header Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e6f6f9e6 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop part.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
6eb32a03 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: add DM ETH support Probe the FMan MACs based on the device tree while retaining the legacy code/functionality. One notable change introduced here is that, for DM_ETH, the name of the interfaces is corrected to the fmX-macY format, that avoids the referral to the MAC block names which were incorrect for FMan v3 devices (i.e. DTSEC, TGEC) and had weird formatting (i.e. FM1@DTSEC6, FM1@TGEC1). The legacy code is left unchanged in this respect. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
1c710187 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: separate receive buffer free code Move the receive buffer free code in a separate function. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
8313cb02 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: change init_phy() param Change the init_phy() parameter to simplify the code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
9b2e892e |
|
04-May-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: minor fix in DM ETH support Bus callback functions for read/write/reset need to be set only for DM_ETH, moving endif a bit lower. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f7ae49fc |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop log.h from common header Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e6f6f9e6 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop part.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
6eb32a03 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: add DM ETH support Probe the FMan MACs based on the device tree while retaining the legacy code/functionality. One notable change introduced here is that, for DM_ETH, the name of the interfaces is corrected to the fmX-macY format, that avoids the referral to the MAC block names which were incorrect for FMan v3 devices (i.e. DTSEC, TGEC) and had weird formatting (i.e. FM1@DTSEC6, FM1@TGEC1). The legacy code is left unchanged in this respect. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
1c710187 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: separate receive buffer free code Move the receive buffer free code in a separate function. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
8313cb02 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: change init_phy() param Change the init_phy() parameter to simplify the code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
9b2e892e |
|
04-May-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: minor fix in DM ETH support Bus callback functions for read/write/reset need to be set only for DM_ETH, moving endif a bit lower. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f7ae49fc |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop log.h from common header Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e6f6f9e6 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop part.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
6eb32a03 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: add DM ETH support Probe the FMan MACs based on the device tree while retaining the legacy code/functionality. One notable change introduced here is that, for DM_ETH, the name of the interfaces is corrected to the fmX-macY format, that avoids the referral to the MAC block names which were incorrect for FMan v3 devices (i.e. DTSEC, TGEC) and had weird formatting (i.e. FM1@DTSEC6, FM1@TGEC1). The legacy code is left unchanged in this respect. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
1c710187 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: separate receive buffer free code Move the receive buffer free code in a separate function. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
8313cb02 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: change init_phy() param Change the init_phy() parameter to simplify the code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
9b2e892e |
|
04-May-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: minor fix in DM ETH support Bus callback functions for read/write/reset need to be set only for DM_ETH, moving endif a bit lower. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f7ae49fc |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop log.h from common header Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e6f6f9e6 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop part.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
6eb32a03 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: add DM ETH support Probe the FMan MACs based on the device tree while retaining the legacy code/functionality. One notable change introduced here is that, for DM_ETH, the name of the interfaces is corrected to the fmX-macY format, that avoids the referral to the MAC block names which were incorrect for FMan v3 devices (i.e. DTSEC, TGEC) and had weird formatting (i.e. FM1@DTSEC6, FM1@TGEC1). The legacy code is left unchanged in this respect. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
1c710187 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: separate receive buffer free code Move the receive buffer free code in a separate function. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
8313cb02 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: change init_phy() param Change the init_phy() parameter to simplify the code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
9b2e892e |
|
04-May-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: minor fix in DM ETH support Bus callback functions for read/write/reset need to be set only for DM_ETH, moving endif a bit lower. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f7ae49fc |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop log.h from common header Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e6f6f9e6 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop part.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
6eb32a03 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: add DM ETH support Probe the FMan MACs based on the device tree while retaining the legacy code/functionality. One notable change introduced here is that, for DM_ETH, the name of the interfaces is corrected to the fmX-macY format, that avoids the referral to the MAC block names which were incorrect for FMan v3 devices (i.e. DTSEC, TGEC) and had weird formatting (i.e. FM1@DTSEC6, FM1@TGEC1). The legacy code is left unchanged in this respect. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
1c710187 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: separate receive buffer free code Move the receive buffer free code in a separate function. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
8313cb02 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: change init_phy() param Change the init_phy() parameter to simplify the code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
9b2e892e |
|
04-May-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: minor fix in DM ETH support Bus callback functions for read/write/reset need to be set only for DM_ETH, moving endif a bit lower. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f7ae49fc |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop log.h from common header Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e6f6f9e6 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop part.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
6eb32a03 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: add DM ETH support Probe the FMan MACs based on the device tree while retaining the legacy code/functionality. One notable change introduced here is that, for DM_ETH, the name of the interfaces is corrected to the fmX-macY format, that avoids the referral to the MAC block names which were incorrect for FMan v3 devices (i.e. DTSEC, TGEC) and had weird formatting (i.e. FM1@DTSEC6, FM1@TGEC1). The legacy code is left unchanged in this respect. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
1c710187 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: separate receive buffer free code Move the receive buffer free code in a separate function. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
8313cb02 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: change init_phy() param Change the init_phy() parameter to simplify the code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
9b2e892e |
|
04-May-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: minor fix in DM ETH support Bus callback functions for read/write/reset need to be set only for DM_ETH, moving endif a bit lower. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f7ae49fc |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop log.h from common header Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e6f6f9e6 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop part.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
6eb32a03 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: add DM ETH support Probe the FMan MACs based on the device tree while retaining the legacy code/functionality. One notable change introduced here is that, for DM_ETH, the name of the interfaces is corrected to the fmX-macY format, that avoids the referral to the MAC block names which were incorrect for FMan v3 devices (i.e. DTSEC, TGEC) and had weird formatting (i.e. FM1@DTSEC6, FM1@TGEC1). The legacy code is left unchanged in this respect. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
1c710187 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: separate receive buffer free code Move the receive buffer free code in a separate function. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
8313cb02 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: change init_phy() param Change the init_phy() parameter to simplify the code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
9b2e892e |
|
04-May-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: minor fix in DM ETH support Bus callback functions for read/write/reset need to be set only for DM_ETH, moving endif a bit lower. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f7ae49fc |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop log.h from common header Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e6f6f9e6 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop part.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
6eb32a03 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: add DM ETH support Probe the FMan MACs based on the device tree while retaining the legacy code/functionality. One notable change introduced here is that, for DM_ETH, the name of the interfaces is corrected to the fmX-macY format, that avoids the referral to the MAC block names which were incorrect for FMan v3 devices (i.e. DTSEC, TGEC) and had weird formatting (i.e. FM1@DTSEC6, FM1@TGEC1). The legacy code is left unchanged in this respect. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
1c710187 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: separate receive buffer free code Move the receive buffer free code in a separate function. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
8313cb02 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: change init_phy() param Change the init_phy() parameter to simplify the code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
9b2e892e |
|
04-May-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: minor fix in DM ETH support Bus callback functions for read/write/reset need to be set only for DM_ETH, moving endif a bit lower. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f7ae49fc |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop log.h from common header Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e6f6f9e6 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop part.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
6eb32a03 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: add DM ETH support Probe the FMan MACs based on the device tree while retaining the legacy code/functionality. One notable change introduced here is that, for DM_ETH, the name of the interfaces is corrected to the fmX-macY format, that avoids the referral to the MAC block names which were incorrect for FMan v3 devices (i.e. DTSEC, TGEC) and had weird formatting (i.e. FM1@DTSEC6, FM1@TGEC1). The legacy code is left unchanged in this respect. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
1c710187 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: separate receive buffer free code Move the receive buffer free code in a separate function. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
8313cb02 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: change init_phy() param Change the init_phy() parameter to simplify the code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
9b2e892e |
|
04-May-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: minor fix in DM ETH support Bus callback functions for read/write/reset need to be set only for DM_ETH, moving endif a bit lower. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f7ae49fc |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop log.h from common header Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e6f6f9e6 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop part.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
6eb32a03 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: add DM ETH support Probe the FMan MACs based on the device tree while retaining the legacy code/functionality. One notable change introduced here is that, for DM_ETH, the name of the interfaces is corrected to the fmX-macY format, that avoids the referral to the MAC block names which were incorrect for FMan v3 devices (i.e. DTSEC, TGEC) and had weird formatting (i.e. FM1@DTSEC6, FM1@TGEC1). The legacy code is left unchanged in this respect. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
1c710187 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: separate receive buffer free code Move the receive buffer free code in a separate function. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
8313cb02 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: change init_phy() param Change the init_phy() parameter to simplify the code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
9b2e892e |
|
04-May-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: minor fix in DM ETH support Bus callback functions for read/write/reset need to be set only for DM_ETH, moving endif a bit lower. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f7ae49fc |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop log.h from common header Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e6f6f9e6 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop part.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
6eb32a03 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: add DM ETH support Probe the FMan MACs based on the device tree while retaining the legacy code/functionality. One notable change introduced here is that, for DM_ETH, the name of the interfaces is corrected to the fmX-macY format, that avoids the referral to the MAC block names which were incorrect for FMan v3 devices (i.e. DTSEC, TGEC) and had weird formatting (i.e. FM1@DTSEC6, FM1@TGEC1). The legacy code is left unchanged in this respect. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
1c710187 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: separate receive buffer free code Move the receive buffer free code in a separate function. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
8313cb02 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: change init_phy() param Change the init_phy() parameter to simplify the code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
9b2e892e |
|
04-May-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: minor fix in DM ETH support Bus callback functions for read/write/reset need to be set only for DM_ETH, moving endif a bit lower. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f7ae49fc |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop log.h from common header Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e6f6f9e6 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop part.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
6eb32a03 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: add DM ETH support Probe the FMan MACs based on the device tree while retaining the legacy code/functionality. One notable change introduced here is that, for DM_ETH, the name of the interfaces is corrected to the fmX-macY format, that avoids the referral to the MAC block names which were incorrect for FMan v3 devices (i.e. DTSEC, TGEC) and had weird formatting (i.e. FM1@DTSEC6, FM1@TGEC1). The legacy code is left unchanged in this respect. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
1c710187 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: separate receive buffer free code Move the receive buffer free code in a separate function. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
8313cb02 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: change init_phy() param Change the init_phy() parameter to simplify the code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
9b2e892e |
|
04-May-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: minor fix in DM ETH support Bus callback functions for read/write/reset need to be set only for DM_ETH, moving endif a bit lower. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f7ae49fc |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop log.h from common header Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e6f6f9e6 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop part.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
6eb32a03 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: add DM ETH support Probe the FMan MACs based on the device tree while retaining the legacy code/functionality. One notable change introduced here is that, for DM_ETH, the name of the interfaces is corrected to the fmX-macY format, that avoids the referral to the MAC block names which were incorrect for FMan v3 devices (i.e. DTSEC, TGEC) and had weird formatting (i.e. FM1@DTSEC6, FM1@TGEC1). The legacy code is left unchanged in this respect. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
1c710187 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: separate receive buffer free code Move the receive buffer free code in a separate function. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
8313cb02 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: change init_phy() param Change the init_phy() parameter to simplify the code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
9b2e892e |
|
04-May-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: minor fix in DM ETH support Bus callback functions for read/write/reset need to be set only for DM_ETH, moving endif a bit lower. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f7ae49fc |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop log.h from common header Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e6f6f9e6 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop part.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
6eb32a03 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: add DM ETH support Probe the FMan MACs based on the device tree while retaining the legacy code/functionality. One notable change introduced here is that, for DM_ETH, the name of the interfaces is corrected to the fmX-macY format, that avoids the referral to the MAC block names which were incorrect for FMan v3 devices (i.e. DTSEC, TGEC) and had weird formatting (i.e. FM1@DTSEC6, FM1@TGEC1). The legacy code is left unchanged in this respect. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
1c710187 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: separate receive buffer free code Move the receive buffer free code in a separate function. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
8313cb02 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: change init_phy() param Change the init_phy() parameter to simplify the code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
9b2e892e |
|
04-May-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: minor fix in DM ETH support Bus callback functions for read/write/reset need to be set only for DM_ETH, moving endif a bit lower. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f7ae49fc |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop log.h from common header Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e6f6f9e6 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop part.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
6eb32a03 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: add DM ETH support Probe the FMan MACs based on the device tree while retaining the legacy code/functionality. One notable change introduced here is that, for DM_ETH, the name of the interfaces is corrected to the fmX-macY format, that avoids the referral to the MAC block names which were incorrect for FMan v3 devices (i.e. DTSEC, TGEC) and had weird formatting (i.e. FM1@DTSEC6, FM1@TGEC1). The legacy code is left unchanged in this respect. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
1c710187 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: separate receive buffer free code Move the receive buffer free code in a separate function. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
8313cb02 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: change init_phy() param Change the init_phy() parameter to simplify the code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
9b2e892e |
|
04-May-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: minor fix in DM ETH support Bus callback functions for read/write/reset need to be set only for DM_ETH, moving endif a bit lower. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f7ae49fc |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop log.h from common header Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e6f6f9e6 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop part.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
6eb32a03 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: add DM ETH support Probe the FMan MACs based on the device tree while retaining the legacy code/functionality. One notable change introduced here is that, for DM_ETH, the name of the interfaces is corrected to the fmX-macY format, that avoids the referral to the MAC block names which were incorrect for FMan v3 devices (i.e. DTSEC, TGEC) and had weird formatting (i.e. FM1@DTSEC6, FM1@TGEC1). The legacy code is left unchanged in this respect. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
1c710187 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: separate receive buffer free code Move the receive buffer free code in a separate function. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
8313cb02 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: change init_phy() param Change the init_phy() parameter to simplify the code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
9b2e892e |
|
04-May-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: minor fix in DM ETH support Bus callback functions for read/write/reset need to be set only for DM_ETH, moving endif a bit lower. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f7ae49fc |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop log.h from common header Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e6f6f9e6 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop part.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
6eb32a03 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: add DM ETH support Probe the FMan MACs based on the device tree while retaining the legacy code/functionality. One notable change introduced here is that, for DM_ETH, the name of the interfaces is corrected to the fmX-macY format, that avoids the referral to the MAC block names which were incorrect for FMan v3 devices (i.e. DTSEC, TGEC) and had weird formatting (i.e. FM1@DTSEC6, FM1@TGEC1). The legacy code is left unchanged in this respect. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
1c710187 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: separate receive buffer free code Move the receive buffer free code in a separate function. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
8313cb02 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: change init_phy() param Change the init_phy() parameter to simplify the code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
9b2e892e |
|
04-May-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: minor fix in DM ETH support Bus callback functions for read/write/reset need to be set only for DM_ETH, moving endif a bit lower. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f7ae49fc |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop log.h from common header Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e6f6f9e6 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop part.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
6eb32a03 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: add DM ETH support Probe the FMan MACs based on the device tree while retaining the legacy code/functionality. One notable change introduced here is that, for DM_ETH, the name of the interfaces is corrected to the fmX-macY format, that avoids the referral to the MAC block names which were incorrect for FMan v3 devices (i.e. DTSEC, TGEC) and had weird formatting (i.e. FM1@DTSEC6, FM1@TGEC1). The legacy code is left unchanged in this respect. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
1c710187 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: separate receive buffer free code Move the receive buffer free code in a separate function. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
8313cb02 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: change init_phy() param Change the init_phy() parameter to simplify the code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
9b2e892e |
|
04-May-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: minor fix in DM ETH support Bus callback functions for read/write/reset need to be set only for DM_ETH, moving endif a bit lower. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f7ae49fc |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop log.h from common header Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e6f6f9e6 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop part.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
6eb32a03 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: add DM ETH support Probe the FMan MACs based on the device tree while retaining the legacy code/functionality. One notable change introduced here is that, for DM_ETH, the name of the interfaces is corrected to the fmX-macY format, that avoids the referral to the MAC block names which were incorrect for FMan v3 devices (i.e. DTSEC, TGEC) and had weird formatting (i.e. FM1@DTSEC6, FM1@TGEC1). The legacy code is left unchanged in this respect. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
1c710187 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: separate receive buffer free code Move the receive buffer free code in a separate function. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
8313cb02 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: change init_phy() param Change the init_phy() parameter to simplify the code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
9b2e892e |
|
04-May-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: minor fix in DM ETH support Bus callback functions for read/write/reset need to be set only for DM_ETH, moving endif a bit lower. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f7ae49fc |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop log.h from common header Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e6f6f9e6 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop part.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
6eb32a03 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: add DM ETH support Probe the FMan MACs based on the device tree while retaining the legacy code/functionality. One notable change introduced here is that, for DM_ETH, the name of the interfaces is corrected to the fmX-macY format, that avoids the referral to the MAC block names which were incorrect for FMan v3 devices (i.e. DTSEC, TGEC) and had weird formatting (i.e. FM1@DTSEC6, FM1@TGEC1). The legacy code is left unchanged in this respect. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
1c710187 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: separate receive buffer free code Move the receive buffer free code in a separate function. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
8313cb02 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: change init_phy() param Change the init_phy() parameter to simplify the code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
9b2e892e |
|
04-May-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: minor fix in DM ETH support Bus callback functions for read/write/reset need to be set only for DM_ETH, moving endif a bit lower. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f7ae49fc |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop log.h from common header Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e6f6f9e6 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop part.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
6eb32a03 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: add DM ETH support Probe the FMan MACs based on the device tree while retaining the legacy code/functionality. One notable change introduced here is that, for DM_ETH, the name of the interfaces is corrected to the fmX-macY format, that avoids the referral to the MAC block names which were incorrect for FMan v3 devices (i.e. DTSEC, TGEC) and had weird formatting (i.e. FM1@DTSEC6, FM1@TGEC1). The legacy code is left unchanged in this respect. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
1c710187 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: separate receive buffer free code Move the receive buffer free code in a separate function. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
8313cb02 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: change init_phy() param Change the init_phy() parameter to simplify the code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
9b2e892e |
|
04-May-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: minor fix in DM ETH support Bus callback functions for read/write/reset need to be set only for DM_ETH, moving endif a bit lower. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f7ae49fc |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop log.h from common header Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e6f6f9e6 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop part.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
6eb32a03 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: add DM ETH support Probe the FMan MACs based on the device tree while retaining the legacy code/functionality. One notable change introduced here is that, for DM_ETH, the name of the interfaces is corrected to the fmX-macY format, that avoids the referral to the MAC block names which were incorrect for FMan v3 devices (i.e. DTSEC, TGEC) and had weird formatting (i.e. FM1@DTSEC6, FM1@TGEC1). The legacy code is left unchanged in this respect. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
1c710187 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: separate receive buffer free code Move the receive buffer free code in a separate function. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
8313cb02 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: change init_phy() param Change the init_phy() parameter to simplify the code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
9b2e892e |
|
04-May-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: minor fix in DM ETH support Bus callback functions for read/write/reset need to be set only for DM_ETH, moving endif a bit lower. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f7ae49fc |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop log.h from common header Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e6f6f9e6 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop part.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
6eb32a03 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: add DM ETH support Probe the FMan MACs based on the device tree while retaining the legacy code/functionality. One notable change introduced here is that, for DM_ETH, the name of the interfaces is corrected to the fmX-macY format, that avoids the referral to the MAC block names which were incorrect for FMan v3 devices (i.e. DTSEC, TGEC) and had weird formatting (i.e. FM1@DTSEC6, FM1@TGEC1). The legacy code is left unchanged in this respect. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
1c710187 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: separate receive buffer free code Move the receive buffer free code in a separate function. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
8313cb02 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: change init_phy() param Change the init_phy() parameter to simplify the code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
9b2e892e |
|
04-May-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: minor fix in DM ETH support Bus callback functions for read/write/reset need to be set only for DM_ETH, moving endif a bit lower. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f7ae49fc |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop log.h from common header Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e6f6f9e6 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop part.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
6eb32a03 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: add DM ETH support Probe the FMan MACs based on the device tree while retaining the legacy code/functionality. One notable change introduced here is that, for DM_ETH, the name of the interfaces is corrected to the fmX-macY format, that avoids the referral to the MAC block names which were incorrect for FMan v3 devices (i.e. DTSEC, TGEC) and had weird formatting (i.e. FM1@DTSEC6, FM1@TGEC1). The legacy code is left unchanged in this respect. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
1c710187 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: separate receive buffer free code Move the receive buffer free code in a separate function. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
8313cb02 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: change init_phy() param Change the init_phy() parameter to simplify the code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
9b2e892e |
|
04-May-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: minor fix in DM ETH support Bus callback functions for read/write/reset need to be set only for DM_ETH, moving endif a bit lower. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f7ae49fc |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop log.h from common header Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e6f6f9e6 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop part.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
6eb32a03 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: add DM ETH support Probe the FMan MACs based on the device tree while retaining the legacy code/functionality. One notable change introduced here is that, for DM_ETH, the name of the interfaces is corrected to the fmX-macY format, that avoids the referral to the MAC block names which were incorrect for FMan v3 devices (i.e. DTSEC, TGEC) and had weird formatting (i.e. FM1@DTSEC6, FM1@TGEC1). The legacy code is left unchanged in this respect. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
1c710187 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: separate receive buffer free code Move the receive buffer free code in a separate function. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
8313cb02 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: change init_phy() param Change the init_phy() parameter to simplify the code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
9b2e892e |
|
04-May-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: minor fix in DM ETH support Bus callback functions for read/write/reset need to be set only for DM_ETH, moving endif a bit lower. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f7ae49fc |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop log.h from common header Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e6f6f9e6 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop part.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
6eb32a03 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: add DM ETH support Probe the FMan MACs based on the device tree while retaining the legacy code/functionality. One notable change introduced here is that, for DM_ETH, the name of the interfaces is corrected to the fmX-macY format, that avoids the referral to the MAC block names which were incorrect for FMan v3 devices (i.e. DTSEC, TGEC) and had weird formatting (i.e. FM1@DTSEC6, FM1@TGEC1). The legacy code is left unchanged in this respect. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
1c710187 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: separate receive buffer free code Move the receive buffer free code in a separate function. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
8313cb02 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: change init_phy() param Change the init_phy() parameter to simplify the code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
9b2e892e |
|
04-May-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: minor fix in DM ETH support Bus callback functions for read/write/reset need to be set only for DM_ETH, moving endif a bit lower. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f7ae49fc |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop log.h from common header Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e6f6f9e6 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop part.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
6eb32a03 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: add DM ETH support Probe the FMan MACs based on the device tree while retaining the legacy code/functionality. One notable change introduced here is that, for DM_ETH, the name of the interfaces is corrected to the fmX-macY format, that avoids the referral to the MAC block names which were incorrect for FMan v3 devices (i.e. DTSEC, TGEC) and had weird formatting (i.e. FM1@DTSEC6, FM1@TGEC1). The legacy code is left unchanged in this respect. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
1c710187 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: separate receive buffer free code Move the receive buffer free code in a separate function. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
8313cb02 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: change init_phy() param Change the init_phy() parameter to simplify the code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
9b2e892e |
|
04-May-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: minor fix in DM ETH support Bus callback functions for read/write/reset need to be set only for DM_ETH, moving endif a bit lower. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f7ae49fc |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop log.h from common header Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e6f6f9e6 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop part.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
6eb32a03 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: add DM ETH support Probe the FMan MACs based on the device tree while retaining the legacy code/functionality. One notable change introduced here is that, for DM_ETH, the name of the interfaces is corrected to the fmX-macY format, that avoids the referral to the MAC block names which were incorrect for FMan v3 devices (i.e. DTSEC, TGEC) and had weird formatting (i.e. FM1@DTSEC6, FM1@TGEC1). The legacy code is left unchanged in this respect. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
1c710187 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: separate receive buffer free code Move the receive buffer free code in a separate function. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
8313cb02 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: change init_phy() param Change the init_phy() parameter to simplify the code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
9b2e892e |
|
04-May-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: minor fix in DM ETH support Bus callback functions for read/write/reset need to be set only for DM_ETH, moving endif a bit lower. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f7ae49fc |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop log.h from common header Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e6f6f9e6 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop part.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
6eb32a03 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: add DM ETH support Probe the FMan MACs based on the device tree while retaining the legacy code/functionality. One notable change introduced here is that, for DM_ETH, the name of the interfaces is corrected to the fmX-macY format, that avoids the referral to the MAC block names which were incorrect for FMan v3 devices (i.e. DTSEC, TGEC) and had weird formatting (i.e. FM1@DTSEC6, FM1@TGEC1). The legacy code is left unchanged in this respect. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
1c710187 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: separate receive buffer free code Move the receive buffer free code in a separate function. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
8313cb02 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: change init_phy() param Change the init_phy() parameter to simplify the code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
9b2e892e |
|
04-May-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: minor fix in DM ETH support Bus callback functions for read/write/reset need to be set only for DM_ETH, moving endif a bit lower. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f7ae49fc |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop log.h from common header Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e6f6f9e6 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop part.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
6eb32a03 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: add DM ETH support Probe the FMan MACs based on the device tree while retaining the legacy code/functionality. One notable change introduced here is that, for DM_ETH, the name of the interfaces is corrected to the fmX-macY format, that avoids the referral to the MAC block names which were incorrect for FMan v3 devices (i.e. DTSEC, TGEC) and had weird formatting (i.e. FM1@DTSEC6, FM1@TGEC1). The legacy code is left unchanged in this respect. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
1c710187 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: separate receive buffer free code Move the receive buffer free code in a separate function. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
8313cb02 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: change init_phy() param Change the init_phy() parameter to simplify the code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
9b2e892e |
|
04-May-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: minor fix in DM ETH support Bus callback functions for read/write/reset need to be set only for DM_ETH, moving endif a bit lower. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f7ae49fc |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop log.h from common header Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e6f6f9e6 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop part.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
6eb32a03 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: add DM ETH support Probe the FMan MACs based on the device tree while retaining the legacy code/functionality. One notable change introduced here is that, for DM_ETH, the name of the interfaces is corrected to the fmX-macY format, that avoids the referral to the MAC block names which were incorrect for FMan v3 devices (i.e. DTSEC, TGEC) and had weird formatting (i.e. FM1@DTSEC6, FM1@TGEC1). The legacy code is left unchanged in this respect. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
1c710187 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: separate receive buffer free code Move the receive buffer free code in a separate function. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
8313cb02 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: change init_phy() param Change the init_phy() parameter to simplify the code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
9b2e892e |
|
04-May-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: minor fix in DM ETH support Bus callback functions for read/write/reset need to be set only for DM_ETH, moving endif a bit lower. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f7ae49fc |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop log.h from common header Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e6f6f9e6 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop part.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
6eb32a03 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: add DM ETH support Probe the FMan MACs based on the device tree while retaining the legacy code/functionality. One notable change introduced here is that, for DM_ETH, the name of the interfaces is corrected to the fmX-macY format, that avoids the referral to the MAC block names which were incorrect for FMan v3 devices (i.e. DTSEC, TGEC) and had weird formatting (i.e. FM1@DTSEC6, FM1@TGEC1). The legacy code is left unchanged in this respect. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
1c710187 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: separate receive buffer free code Move the receive buffer free code in a separate function. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
8313cb02 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: change init_phy() param Change the init_phy() parameter to simplify the code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
9b2e892e |
|
04-May-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: minor fix in DM ETH support Bus callback functions for read/write/reset need to be set only for DM_ETH, moving endif a bit lower. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f7ae49fc |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop log.h from common header Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e6f6f9e6 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop part.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
6eb32a03 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: add DM ETH support Probe the FMan MACs based on the device tree while retaining the legacy code/functionality. One notable change introduced here is that, for DM_ETH, the name of the interfaces is corrected to the fmX-macY format, that avoids the referral to the MAC block names which were incorrect for FMan v3 devices (i.e. DTSEC, TGEC) and had weird formatting (i.e. FM1@DTSEC6, FM1@TGEC1). The legacy code is left unchanged in this respect. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
1c710187 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: separate receive buffer free code Move the receive buffer free code in a separate function. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
8313cb02 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: change init_phy() param Change the init_phy() parameter to simplify the code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
9b2e892e |
|
04-May-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: minor fix in DM ETH support Bus callback functions for read/write/reset need to be set only for DM_ETH, moving endif a bit lower. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f7ae49fc |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop log.h from common header Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e6f6f9e6 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop part.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
6eb32a03 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: add DM ETH support Probe the FMan MACs based on the device tree while retaining the legacy code/functionality. One notable change introduced here is that, for DM_ETH, the name of the interfaces is corrected to the fmX-macY format, that avoids the referral to the MAC block names which were incorrect for FMan v3 devices (i.e. DTSEC, TGEC) and had weird formatting (i.e. FM1@DTSEC6, FM1@TGEC1). The legacy code is left unchanged in this respect. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
1c710187 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: separate receive buffer free code Move the receive buffer free code in a separate function. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
8313cb02 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: change init_phy() param Change the init_phy() parameter to simplify the code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
9b2e892e |
|
04-May-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: minor fix in DM ETH support Bus callback functions for read/write/reset need to be set only for DM_ETH, moving endif a bit lower. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f7ae49fc |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop log.h from common header Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e6f6f9e6 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop part.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
6eb32a03 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: add DM ETH support Probe the FMan MACs based on the device tree while retaining the legacy code/functionality. One notable change introduced here is that, for DM_ETH, the name of the interfaces is corrected to the fmX-macY format, that avoids the referral to the MAC block names which were incorrect for FMan v3 devices (i.e. DTSEC, TGEC) and had weird formatting (i.e. FM1@DTSEC6, FM1@TGEC1). The legacy code is left unchanged in this respect. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
1c710187 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: separate receive buffer free code Move the receive buffer free code in a separate function. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
8313cb02 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: change init_phy() param Change the init_phy() parameter to simplify the code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
9b2e892e |
|
04-May-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: minor fix in DM ETH support Bus callback functions for read/write/reset need to be set only for DM_ETH, moving endif a bit lower. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f7ae49fc |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop log.h from common header Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e6f6f9e6 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop part.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
6eb32a03 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: add DM ETH support Probe the FMan MACs based on the device tree while retaining the legacy code/functionality. One notable change introduced here is that, for DM_ETH, the name of the interfaces is corrected to the fmX-macY format, that avoids the referral to the MAC block names which were incorrect for FMan v3 devices (i.e. DTSEC, TGEC) and had weird formatting (i.e. FM1@DTSEC6, FM1@TGEC1). The legacy code is left unchanged in this respect. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
1c710187 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: separate receive buffer free code Move the receive buffer free code in a separate function. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
8313cb02 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: change init_phy() param Change the init_phy() parameter to simplify the code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
9b2e892e |
|
04-May-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: minor fix in DM ETH support Bus callback functions for read/write/reset need to be set only for DM_ETH, moving endif a bit lower. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f7ae49fc |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop log.h from common header Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e6f6f9e6 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop part.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
6eb32a03 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: add DM ETH support Probe the FMan MACs based on the device tree while retaining the legacy code/functionality. One notable change introduced here is that, for DM_ETH, the name of the interfaces is corrected to the fmX-macY format, that avoids the referral to the MAC block names which were incorrect for FMan v3 devices (i.e. DTSEC, TGEC) and had weird formatting (i.e. FM1@DTSEC6, FM1@TGEC1). The legacy code is left unchanged in this respect. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
1c710187 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: separate receive buffer free code Move the receive buffer free code in a separate function. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
8313cb02 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: change init_phy() param Change the init_phy() parameter to simplify the code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
9b2e892e |
|
04-May-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: minor fix in DM ETH support Bus callback functions for read/write/reset need to be set only for DM_ETH, moving endif a bit lower. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f7ae49fc |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop log.h from common header Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e6f6f9e6 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop part.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
6eb32a03 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: add DM ETH support Probe the FMan MACs based on the device tree while retaining the legacy code/functionality. One notable change introduced here is that, for DM_ETH, the name of the interfaces is corrected to the fmX-macY format, that avoids the referral to the MAC block names which were incorrect for FMan v3 devices (i.e. DTSEC, TGEC) and had weird formatting (i.e. FM1@DTSEC6, FM1@TGEC1). The legacy code is left unchanged in this respect. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
1c710187 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: separate receive buffer free code Move the receive buffer free code in a separate function. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
8313cb02 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: change init_phy() param Change the init_phy() parameter to simplify the code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
9b2e892e |
|
04-May-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: minor fix in DM ETH support Bus callback functions for read/write/reset need to be set only for DM_ETH, moving endif a bit lower. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f7ae49fc |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop log.h from common header Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e6f6f9e6 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop part.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
6eb32a03 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: add DM ETH support Probe the FMan MACs based on the device tree while retaining the legacy code/functionality. One notable change introduced here is that, for DM_ETH, the name of the interfaces is corrected to the fmX-macY format, that avoids the referral to the MAC block names which were incorrect for FMan v3 devices (i.e. DTSEC, TGEC) and had weird formatting (i.e. FM1@DTSEC6, FM1@TGEC1). The legacy code is left unchanged in this respect. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
1c710187 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: separate receive buffer free code Move the receive buffer free code in a separate function. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
8313cb02 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: change init_phy() param Change the init_phy() parameter to simplify the code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
9b2e892e |
|
04-May-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: minor fix in DM ETH support Bus callback functions for read/write/reset need to be set only for DM_ETH, moving endif a bit lower. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f7ae49fc |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop log.h from common header Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e6f6f9e6 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop part.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
6eb32a03 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: add DM ETH support Probe the FMan MACs based on the device tree while retaining the legacy code/functionality. One notable change introduced here is that, for DM_ETH, the name of the interfaces is corrected to the fmX-macY format, that avoids the referral to the MAC block names which were incorrect for FMan v3 devices (i.e. DTSEC, TGEC) and had weird formatting (i.e. FM1@DTSEC6, FM1@TGEC1). The legacy code is left unchanged in this respect. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
1c710187 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: separate receive buffer free code Move the receive buffer free code in a separate function. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
8313cb02 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: change init_phy() param Change the init_phy() parameter to simplify the code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
9b2e892e |
|
04-May-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: minor fix in DM ETH support Bus callback functions for read/write/reset need to be set only for DM_ETH, moving endif a bit lower. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f7ae49fc |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop log.h from common header Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e6f6f9e6 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop part.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
6eb32a03 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: add DM ETH support Probe the FMan MACs based on the device tree while retaining the legacy code/functionality. One notable change introduced here is that, for DM_ETH, the name of the interfaces is corrected to the fmX-macY format, that avoids the referral to the MAC block names which were incorrect for FMan v3 devices (i.e. DTSEC, TGEC) and had weird formatting (i.e. FM1@DTSEC6, FM1@TGEC1). The legacy code is left unchanged in this respect. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
1c710187 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: separate receive buffer free code Move the receive buffer free code in a separate function. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
8313cb02 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: change init_phy() param Change the init_phy() parameter to simplify the code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
9b2e892e |
|
04-May-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: minor fix in DM ETH support Bus callback functions for read/write/reset need to be set only for DM_ETH, moving endif a bit lower. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f7ae49fc |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop log.h from common header Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e6f6f9e6 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop part.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
6eb32a03 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: add DM ETH support Probe the FMan MACs based on the device tree while retaining the legacy code/functionality. One notable change introduced here is that, for DM_ETH, the name of the interfaces is corrected to the fmX-macY format, that avoids the referral to the MAC block names which were incorrect for FMan v3 devices (i.e. DTSEC, TGEC) and had weird formatting (i.e. FM1@DTSEC6, FM1@TGEC1). The legacy code is left unchanged in this respect. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
1c710187 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: separate receive buffer free code Move the receive buffer free code in a separate function. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
8313cb02 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: change init_phy() param Change the init_phy() parameter to simplify the code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
9b2e892e |
|
04-May-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: minor fix in DM ETH support Bus callback functions for read/write/reset need to be set only for DM_ETH, moving endif a bit lower. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f7ae49fc |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop log.h from common header Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e6f6f9e6 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop part.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
6eb32a03 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: add DM ETH support Probe the FMan MACs based on the device tree while retaining the legacy code/functionality. One notable change introduced here is that, for DM_ETH, the name of the interfaces is corrected to the fmX-macY format, that avoids the referral to the MAC block names which were incorrect for FMan v3 devices (i.e. DTSEC, TGEC) and had weird formatting (i.e. FM1@DTSEC6, FM1@TGEC1). The legacy code is left unchanged in this respect. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
1c710187 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: separate receive buffer free code Move the receive buffer free code in a separate function. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
8313cb02 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: change init_phy() param Change the init_phy() parameter to simplify the code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
9b2e892e |
|
04-May-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: minor fix in DM ETH support Bus callback functions for read/write/reset need to be set only for DM_ETH, moving endif a bit lower. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f7ae49fc |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop log.h from common header Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e6f6f9e6 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop part.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
6eb32a03 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: add DM ETH support Probe the FMan MACs based on the device tree while retaining the legacy code/functionality. One notable change introduced here is that, for DM_ETH, the name of the interfaces is corrected to the fmX-macY format, that avoids the referral to the MAC block names which were incorrect for FMan v3 devices (i.e. DTSEC, TGEC) and had weird formatting (i.e. FM1@DTSEC6, FM1@TGEC1). The legacy code is left unchanged in this respect. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
1c710187 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: separate receive buffer free code Move the receive buffer free code in a separate function. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
8313cb02 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: change init_phy() param Change the init_phy() parameter to simplify the code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
9b2e892e |
|
04-May-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: minor fix in DM ETH support Bus callback functions for read/write/reset need to be set only for DM_ETH, moving endif a bit lower. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f7ae49fc |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop log.h from common header Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e6f6f9e6 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop part.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
6eb32a03 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: add DM ETH support Probe the FMan MACs based on the device tree while retaining the legacy code/functionality. One notable change introduced here is that, for DM_ETH, the name of the interfaces is corrected to the fmX-macY format, that avoids the referral to the MAC block names which were incorrect for FMan v3 devices (i.e. DTSEC, TGEC) and had weird formatting (i.e. FM1@DTSEC6, FM1@TGEC1). The legacy code is left unchanged in this respect. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
1c710187 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: separate receive buffer free code Move the receive buffer free code in a separate function. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
8313cb02 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: change init_phy() param Change the init_phy() parameter to simplify the code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
9b2e892e |
|
04-May-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: minor fix in DM ETH support Bus callback functions for read/write/reset need to be set only for DM_ETH, moving endif a bit lower. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f7ae49fc |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop log.h from common header Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e6f6f9e6 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop part.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
6eb32a03 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: add DM ETH support Probe the FMan MACs based on the device tree while retaining the legacy code/functionality. One notable change introduced here is that, for DM_ETH, the name of the interfaces is corrected to the fmX-macY format, that avoids the referral to the MAC block names which were incorrect for FMan v3 devices (i.e. DTSEC, TGEC) and had weird formatting (i.e. FM1@DTSEC6, FM1@TGEC1). The legacy code is left unchanged in this respect. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
1c710187 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: separate receive buffer free code Move the receive buffer free code in a separate function. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
8313cb02 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: change init_phy() param Change the init_phy() parameter to simplify the code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
9b2e892e |
|
04-May-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: minor fix in DM ETH support Bus callback functions for read/write/reset need to be set only for DM_ETH, moving endif a bit lower. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f7ae49fc |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop log.h from common header Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e6f6f9e6 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop part.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
6eb32a03 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: add DM ETH support Probe the FMan MACs based on the device tree while retaining the legacy code/functionality. One notable change introduced here is that, for DM_ETH, the name of the interfaces is corrected to the fmX-macY format, that avoids the referral to the MAC block names which were incorrect for FMan v3 devices (i.e. DTSEC, TGEC) and had weird formatting (i.e. FM1@DTSEC6, FM1@TGEC1). The legacy code is left unchanged in this respect. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
1c710187 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: separate receive buffer free code Move the receive buffer free code in a separate function. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
8313cb02 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: change init_phy() param Change the init_phy() parameter to simplify the code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
9b2e892e |
|
04-May-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: minor fix in DM ETH support Bus callback functions for read/write/reset need to be set only for DM_ETH, moving endif a bit lower. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f7ae49fc |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop log.h from common header Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e6f6f9e6 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop part.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
6eb32a03 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: add DM ETH support Probe the FMan MACs based on the device tree while retaining the legacy code/functionality. One notable change introduced here is that, for DM_ETH, the name of the interfaces is corrected to the fmX-macY format, that avoids the referral to the MAC block names which were incorrect for FMan v3 devices (i.e. DTSEC, TGEC) and had weird formatting (i.e. FM1@DTSEC6, FM1@TGEC1). The legacy code is left unchanged in this respect. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
1c710187 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: separate receive buffer free code Move the receive buffer free code in a separate function. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
8313cb02 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: change init_phy() param Change the init_phy() parameter to simplify the code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
9b2e892e |
|
04-May-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: minor fix in DM ETH support Bus callback functions for read/write/reset need to be set only for DM_ETH, moving endif a bit lower. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f7ae49fc |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop log.h from common header Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e6f6f9e6 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop part.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
6eb32a03 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: add DM ETH support Probe the FMan MACs based on the device tree while retaining the legacy code/functionality. One notable change introduced here is that, for DM_ETH, the name of the interfaces is corrected to the fmX-macY format, that avoids the referral to the MAC block names which were incorrect for FMan v3 devices (i.e. DTSEC, TGEC) and had weird formatting (i.e. FM1@DTSEC6, FM1@TGEC1). The legacy code is left unchanged in this respect. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
1c710187 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: separate receive buffer free code Move the receive buffer free code in a separate function. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
8313cb02 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: change init_phy() param Change the init_phy() parameter to simplify the code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
9b2e892e |
|
04-May-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: minor fix in DM ETH support Bus callback functions for read/write/reset need to be set only for DM_ETH, moving endif a bit lower. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f7ae49fc |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop log.h from common header Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e6f6f9e6 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop part.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
6eb32a03 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: add DM ETH support Probe the FMan MACs based on the device tree while retaining the legacy code/functionality. One notable change introduced here is that, for DM_ETH, the name of the interfaces is corrected to the fmX-macY format, that avoids the referral to the MAC block names which were incorrect for FMan v3 devices (i.e. DTSEC, TGEC) and had weird formatting (i.e. FM1@DTSEC6, FM1@TGEC1). The legacy code is left unchanged in this respect. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
1c710187 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: separate receive buffer free code Move the receive buffer free code in a separate function. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
8313cb02 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: change init_phy() param Change the init_phy() parameter to simplify the code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
9b2e892e |
|
04-May-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: minor fix in DM ETH support Bus callback functions for read/write/reset need to be set only for DM_ETH, moving endif a bit lower. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f7ae49fc |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop log.h from common header Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e6f6f9e6 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop part.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
6eb32a03 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: add DM ETH support Probe the FMan MACs based on the device tree while retaining the legacy code/functionality. One notable change introduced here is that, for DM_ETH, the name of the interfaces is corrected to the fmX-macY format, that avoids the referral to the MAC block names which were incorrect for FMan v3 devices (i.e. DTSEC, TGEC) and had weird formatting (i.e. FM1@DTSEC6, FM1@TGEC1). The legacy code is left unchanged in this respect. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
1c710187 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: separate receive buffer free code Move the receive buffer free code in a separate function. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
8313cb02 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: change init_phy() param Change the init_phy() parameter to simplify the code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
9b2e892e |
|
04-May-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: minor fix in DM ETH support Bus callback functions for read/write/reset need to be set only for DM_ETH, moving endif a bit lower. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f7ae49fc |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop log.h from common header Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e6f6f9e6 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop part.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
6eb32a03 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: add DM ETH support Probe the FMan MACs based on the device tree while retaining the legacy code/functionality. One notable change introduced here is that, for DM_ETH, the name of the interfaces is corrected to the fmX-macY format, that avoids the referral to the MAC block names which were incorrect for FMan v3 devices (i.e. DTSEC, TGEC) and had weird formatting (i.e. FM1@DTSEC6, FM1@TGEC1). The legacy code is left unchanged in this respect. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
1c710187 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: separate receive buffer free code Move the receive buffer free code in a separate function. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
8313cb02 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: change init_phy() param Change the init_phy() parameter to simplify the code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
9b2e892e |
|
04-May-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: minor fix in DM ETH support Bus callback functions for read/write/reset need to be set only for DM_ETH, moving endif a bit lower. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f7ae49fc |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop log.h from common header Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e6f6f9e6 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop part.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
6eb32a03 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: add DM ETH support Probe the FMan MACs based on the device tree while retaining the legacy code/functionality. One notable change introduced here is that, for DM_ETH, the name of the interfaces is corrected to the fmX-macY format, that avoids the referral to the MAC block names which were incorrect for FMan v3 devices (i.e. DTSEC, TGEC) and had weird formatting (i.e. FM1@DTSEC6, FM1@TGEC1). The legacy code is left unchanged in this respect. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
1c710187 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: separate receive buffer free code Move the receive buffer free code in a separate function. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
8313cb02 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: change init_phy() param Change the init_phy() parameter to simplify the code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
9b2e892e |
|
04-May-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: minor fix in DM ETH support Bus callback functions for read/write/reset need to be set only for DM_ETH, moving endif a bit lower. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f7ae49fc |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop log.h from common header Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e6f6f9e6 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop part.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
6eb32a03 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: add DM ETH support Probe the FMan MACs based on the device tree while retaining the legacy code/functionality. One notable change introduced here is that, for DM_ETH, the name of the interfaces is corrected to the fmX-macY format, that avoids the referral to the MAC block names which were incorrect for FMan v3 devices (i.e. DTSEC, TGEC) and had weird formatting (i.e. FM1@DTSEC6, FM1@TGEC1). The legacy code is left unchanged in this respect. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
1c710187 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: separate receive buffer free code Move the receive buffer free code in a separate function. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
8313cb02 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: change init_phy() param Change the init_phy() parameter to simplify the code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
9b2e892e |
|
04-May-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: minor fix in DM ETH support Bus callback functions for read/write/reset need to be set only for DM_ETH, moving endif a bit lower. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f7ae49fc |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop log.h from common header Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e6f6f9e6 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop part.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
6eb32a03 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: add DM ETH support Probe the FMan MACs based on the device tree while retaining the legacy code/functionality. One notable change introduced here is that, for DM_ETH, the name of the interfaces is corrected to the fmX-macY format, that avoids the referral to the MAC block names which were incorrect for FMan v3 devices (i.e. DTSEC, TGEC) and had weird formatting (i.e. FM1@DTSEC6, FM1@TGEC1). The legacy code is left unchanged in this respect. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
1c710187 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: separate receive buffer free code Move the receive buffer free code in a separate function. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
8313cb02 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: change init_phy() param Change the init_phy() parameter to simplify the code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
9b2e892e |
|
04-May-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: minor fix in DM ETH support Bus callback functions for read/write/reset need to be set only for DM_ETH, moving endif a bit lower. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f7ae49fc |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop log.h from common header Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e6f6f9e6 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop part.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
6eb32a03 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: add DM ETH support Probe the FMan MACs based on the device tree while retaining the legacy code/functionality. One notable change introduced here is that, for DM_ETH, the name of the interfaces is corrected to the fmX-macY format, that avoids the referral to the MAC block names which were incorrect for FMan v3 devices (i.e. DTSEC, TGEC) and had weird formatting (i.e. FM1@DTSEC6, FM1@TGEC1). The legacy code is left unchanged in this respect. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
1c710187 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: separate receive buffer free code Move the receive buffer free code in a separate function. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
8313cb02 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: change init_phy() param Change the init_phy() parameter to simplify the code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
9b2e892e |
|
04-May-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: minor fix in DM ETH support Bus callback functions for read/write/reset need to be set only for DM_ETH, moving endif a bit lower. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f7ae49fc |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop log.h from common header Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e6f6f9e6 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop part.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
6eb32a03 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: add DM ETH support Probe the FMan MACs based on the device tree while retaining the legacy code/functionality. One notable change introduced here is that, for DM_ETH, the name of the interfaces is corrected to the fmX-macY format, that avoids the referral to the MAC block names which were incorrect for FMan v3 devices (i.e. DTSEC, TGEC) and had weird formatting (i.e. FM1@DTSEC6, FM1@TGEC1). The legacy code is left unchanged in this respect. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
1c710187 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: separate receive buffer free code Move the receive buffer free code in a separate function. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
8313cb02 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: change init_phy() param Change the init_phy() parameter to simplify the code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
9b2e892e |
|
04-May-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: minor fix in DM ETH support Bus callback functions for read/write/reset need to be set only for DM_ETH, moving endif a bit lower. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f7ae49fc |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop log.h from common header Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e6f6f9e6 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop part.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
6eb32a03 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: add DM ETH support Probe the FMan MACs based on the device tree while retaining the legacy code/functionality. One notable change introduced here is that, for DM_ETH, the name of the interfaces is corrected to the fmX-macY format, that avoids the referral to the MAC block names which were incorrect for FMan v3 devices (i.e. DTSEC, TGEC) and had weird formatting (i.e. FM1@DTSEC6, FM1@TGEC1). The legacy code is left unchanged in this respect. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
1c710187 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: separate receive buffer free code Move the receive buffer free code in a separate function. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
8313cb02 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: change init_phy() param Change the init_phy() parameter to simplify the code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
9b2e892e |
|
04-May-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: minor fix in DM ETH support Bus callback functions for read/write/reset need to be set only for DM_ETH, moving endif a bit lower. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f7ae49fc |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop log.h from common header Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e6f6f9e6 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop part.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
6eb32a03 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: add DM ETH support Probe the FMan MACs based on the device tree while retaining the legacy code/functionality. One notable change introduced here is that, for DM_ETH, the name of the interfaces is corrected to the fmX-macY format, that avoids the referral to the MAC block names which were incorrect for FMan v3 devices (i.e. DTSEC, TGEC) and had weird formatting (i.e. FM1@DTSEC6, FM1@TGEC1). The legacy code is left unchanged in this respect. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
1c710187 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: separate receive buffer free code Move the receive buffer free code in a separate function. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
8313cb02 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: change init_phy() param Change the init_phy() parameter to simplify the code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
9b2e892e |
|
04-May-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: minor fix in DM ETH support Bus callback functions for read/write/reset need to be set only for DM_ETH, moving endif a bit lower. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f7ae49fc |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop log.h from common header Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e6f6f9e6 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop part.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
6eb32a03 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: add DM ETH support Probe the FMan MACs based on the device tree while retaining the legacy code/functionality. One notable change introduced here is that, for DM_ETH, the name of the interfaces is corrected to the fmX-macY format, that avoids the referral to the MAC block names which were incorrect for FMan v3 devices (i.e. DTSEC, TGEC) and had weird formatting (i.e. FM1@DTSEC6, FM1@TGEC1). The legacy code is left unchanged in this respect. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
1c710187 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: separate receive buffer free code Move the receive buffer free code in a separate function. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
8313cb02 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: change init_phy() param Change the init_phy() parameter to simplify the code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
9b2e892e |
|
04-May-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: minor fix in DM ETH support Bus callback functions for read/write/reset need to be set only for DM_ETH, moving endif a bit lower. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f7ae49fc |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop log.h from common header Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e6f6f9e6 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop part.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
6eb32a03 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: add DM ETH support Probe the FMan MACs based on the device tree while retaining the legacy code/functionality. One notable change introduced here is that, for DM_ETH, the name of the interfaces is corrected to the fmX-macY format, that avoids the referral to the MAC block names which were incorrect for FMan v3 devices (i.e. DTSEC, TGEC) and had weird formatting (i.e. FM1@DTSEC6, FM1@TGEC1). The legacy code is left unchanged in this respect. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
1c710187 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: separate receive buffer free code Move the receive buffer free code in a separate function. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
8313cb02 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: change init_phy() param Change the init_phy() parameter to simplify the code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
9b2e892e |
|
04-May-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: minor fix in DM ETH support Bus callback functions for read/write/reset need to be set only for DM_ETH, moving endif a bit lower. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f7ae49fc |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop log.h from common header Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e6f6f9e6 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop part.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
6eb32a03 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: add DM ETH support Probe the FMan MACs based on the device tree while retaining the legacy code/functionality. One notable change introduced here is that, for DM_ETH, the name of the interfaces is corrected to the fmX-macY format, that avoids the referral to the MAC block names which were incorrect for FMan v3 devices (i.e. DTSEC, TGEC) and had weird formatting (i.e. FM1@DTSEC6, FM1@TGEC1). The legacy code is left unchanged in this respect. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
1c710187 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: separate receive buffer free code Move the receive buffer free code in a separate function. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
8313cb02 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: change init_phy() param Change the init_phy() parameter to simplify the code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
9b2e892e |
|
04-May-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: minor fix in DM ETH support Bus callback functions for read/write/reset need to be set only for DM_ETH, moving endif a bit lower. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f7ae49fc |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop log.h from common header Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e6f6f9e6 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop part.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
6eb32a03 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: add DM ETH support Probe the FMan MACs based on the device tree while retaining the legacy code/functionality. One notable change introduced here is that, for DM_ETH, the name of the interfaces is corrected to the fmX-macY format, that avoids the referral to the MAC block names which were incorrect for FMan v3 devices (i.e. DTSEC, TGEC) and had weird formatting (i.e. FM1@DTSEC6, FM1@TGEC1). The legacy code is left unchanged in this respect. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
1c710187 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: separate receive buffer free code Move the receive buffer free code in a separate function. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
8313cb02 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: change init_phy() param Change the init_phy() parameter to simplify the code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
9b2e892e |
|
04-May-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: minor fix in DM ETH support Bus callback functions for read/write/reset need to be set only for DM_ETH, moving endif a bit lower. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f7ae49fc |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop log.h from common header Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e6f6f9e6 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop part.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
6eb32a03 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: add DM ETH support Probe the FMan MACs based on the device tree while retaining the legacy code/functionality. One notable change introduced here is that, for DM_ETH, the name of the interfaces is corrected to the fmX-macY format, that avoids the referral to the MAC block names which were incorrect for FMan v3 devices (i.e. DTSEC, TGEC) and had weird formatting (i.e. FM1@DTSEC6, FM1@TGEC1). The legacy code is left unchanged in this respect. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
1c710187 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: separate receive buffer free code Move the receive buffer free code in a separate function. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
8313cb02 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: change init_phy() param Change the init_phy() parameter to simplify the code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
9b2e892e |
|
04-May-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: minor fix in DM ETH support Bus callback functions for read/write/reset need to be set only for DM_ETH, moving endif a bit lower. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f7ae49fc |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop log.h from common header Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e6f6f9e6 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop part.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
6eb32a03 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: add DM ETH support Probe the FMan MACs based on the device tree while retaining the legacy code/functionality. One notable change introduced here is that, for DM_ETH, the name of the interfaces is corrected to the fmX-macY format, that avoids the referral to the MAC block names which were incorrect for FMan v3 devices (i.e. DTSEC, TGEC) and had weird formatting (i.e. FM1@DTSEC6, FM1@TGEC1). The legacy code is left unchanged in this respect. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
1c710187 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: separate receive buffer free code Move the receive buffer free code in a separate function. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
8313cb02 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: change init_phy() param Change the init_phy() parameter to simplify the code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
9b2e892e |
|
04-May-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: minor fix in DM ETH support Bus callback functions for read/write/reset need to be set only for DM_ETH, moving endif a bit lower. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f7ae49fc |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop log.h from common header Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e6f6f9e6 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop part.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
6eb32a03 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: add DM ETH support Probe the FMan MACs based on the device tree while retaining the legacy code/functionality. One notable change introduced here is that, for DM_ETH, the name of the interfaces is corrected to the fmX-macY format, that avoids the referral to the MAC block names which were incorrect for FMan v3 devices (i.e. DTSEC, TGEC) and had weird formatting (i.e. FM1@DTSEC6, FM1@TGEC1). The legacy code is left unchanged in this respect. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
1c710187 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: separate receive buffer free code Move the receive buffer free code in a separate function. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
8313cb02 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: change init_phy() param Change the init_phy() parameter to simplify the code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
9b2e892e |
|
04-May-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: minor fix in DM ETH support Bus callback functions for read/write/reset need to be set only for DM_ETH, moving endif a bit lower. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f7ae49fc |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop log.h from common header Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e6f6f9e6 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop part.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
6eb32a03 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: add DM ETH support Probe the FMan MACs based on the device tree while retaining the legacy code/functionality. One notable change introduced here is that, for DM_ETH, the name of the interfaces is corrected to the fmX-macY format, that avoids the referral to the MAC block names which were incorrect for FMan v3 devices (i.e. DTSEC, TGEC) and had weird formatting (i.e. FM1@DTSEC6, FM1@TGEC1). The legacy code is left unchanged in this respect. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
1c710187 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: separate receive buffer free code Move the receive buffer free code in a separate function. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
8313cb02 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: change init_phy() param Change the init_phy() parameter to simplify the code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
9b2e892e |
|
04-May-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: minor fix in DM ETH support Bus callback functions for read/write/reset need to be set only for DM_ETH, moving endif a bit lower. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f7ae49fc |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop log.h from common header Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e6f6f9e6 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop part.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
6eb32a03 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: add DM ETH support Probe the FMan MACs based on the device tree while retaining the legacy code/functionality. One notable change introduced here is that, for DM_ETH, the name of the interfaces is corrected to the fmX-macY format, that avoids the referral to the MAC block names which were incorrect for FMan v3 devices (i.e. DTSEC, TGEC) and had weird formatting (i.e. FM1@DTSEC6, FM1@TGEC1). The legacy code is left unchanged in this respect. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
1c710187 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: separate receive buffer free code Move the receive buffer free code in a separate function. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
8313cb02 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: change init_phy() param Change the init_phy() parameter to simplify the code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
9b2e892e |
|
04-May-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: minor fix in DM ETH support Bus callback functions for read/write/reset need to be set only for DM_ETH, moving endif a bit lower. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f7ae49fc |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop log.h from common header Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e6f6f9e6 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop part.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
6eb32a03 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: add DM ETH support Probe the FMan MACs based on the device tree while retaining the legacy code/functionality. One notable change introduced here is that, for DM_ETH, the name of the interfaces is corrected to the fmX-macY format, that avoids the referral to the MAC block names which were incorrect for FMan v3 devices (i.e. DTSEC, TGEC) and had weird formatting (i.e. FM1@DTSEC6, FM1@TGEC1). The legacy code is left unchanged in this respect. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
1c710187 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: separate receive buffer free code Move the receive buffer free code in a separate function. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
8313cb02 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: change init_phy() param Change the init_phy() parameter to simplify the code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
9b2e892e |
|
04-May-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: minor fix in DM ETH support Bus callback functions for read/write/reset need to be set only for DM_ETH, moving endif a bit lower. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f7ae49fc |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop log.h from common header Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e6f6f9e6 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop part.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
6eb32a03 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: add DM ETH support Probe the FMan MACs based on the device tree while retaining the legacy code/functionality. One notable change introduced here is that, for DM_ETH, the name of the interfaces is corrected to the fmX-macY format, that avoids the referral to the MAC block names which were incorrect for FMan v3 devices (i.e. DTSEC, TGEC) and had weird formatting (i.e. FM1@DTSEC6, FM1@TGEC1). The legacy code is left unchanged in this respect. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
1c710187 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: separate receive buffer free code Move the receive buffer free code in a separate function. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
8313cb02 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: change init_phy() param Change the init_phy() parameter to simplify the code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
9b2e892e |
|
04-May-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: minor fix in DM ETH support Bus callback functions for read/write/reset need to be set only for DM_ETH, moving endif a bit lower. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f7ae49fc |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop log.h from common header Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e6f6f9e6 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop part.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
6eb32a03 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: add DM ETH support Probe the FMan MACs based on the device tree while retaining the legacy code/functionality. One notable change introduced here is that, for DM_ETH, the name of the interfaces is corrected to the fmX-macY format, that avoids the referral to the MAC block names which were incorrect for FMan v3 devices (i.e. DTSEC, TGEC) and had weird formatting (i.e. FM1@DTSEC6, FM1@TGEC1). The legacy code is left unchanged in this respect. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
1c710187 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: separate receive buffer free code Move the receive buffer free code in a separate function. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
8313cb02 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: change init_phy() param Change the init_phy() parameter to simplify the code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
9b2e892e |
|
04-May-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: minor fix in DM ETH support Bus callback functions for read/write/reset need to be set only for DM_ETH, moving endif a bit lower. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f7ae49fc |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop log.h from common header Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e6f6f9e6 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop part.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
6eb32a03 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: add DM ETH support Probe the FMan MACs based on the device tree while retaining the legacy code/functionality. One notable change introduced here is that, for DM_ETH, the name of the interfaces is corrected to the fmX-macY format, that avoids the referral to the MAC block names which were incorrect for FMan v3 devices (i.e. DTSEC, TGEC) and had weird formatting (i.e. FM1@DTSEC6, FM1@TGEC1). The legacy code is left unchanged in this respect. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
1c710187 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: separate receive buffer free code Move the receive buffer free code in a separate function. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
8313cb02 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: change init_phy() param Change the init_phy() parameter to simplify the code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
9b2e892e |
|
04-May-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: minor fix in DM ETH support Bus callback functions for read/write/reset need to be set only for DM_ETH, moving endif a bit lower. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f7ae49fc |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop log.h from common header Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e6f6f9e6 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop part.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
6eb32a03 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: add DM ETH support Probe the FMan MACs based on the device tree while retaining the legacy code/functionality. One notable change introduced here is that, for DM_ETH, the name of the interfaces is corrected to the fmX-macY format, that avoids the referral to the MAC block names which were incorrect for FMan v3 devices (i.e. DTSEC, TGEC) and had weird formatting (i.e. FM1@DTSEC6, FM1@TGEC1). The legacy code is left unchanged in this respect. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
1c710187 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: separate receive buffer free code Move the receive buffer free code in a separate function. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
8313cb02 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: change init_phy() param Change the init_phy() parameter to simplify the code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
9b2e892e |
|
04-May-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: minor fix in DM ETH support Bus callback functions for read/write/reset need to be set only for DM_ETH, moving endif a bit lower. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f7ae49fc |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop log.h from common header Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e6f6f9e6 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop part.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
6eb32a03 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: add DM ETH support Probe the FMan MACs based on the device tree while retaining the legacy code/functionality. One notable change introduced here is that, for DM_ETH, the name of the interfaces is corrected to the fmX-macY format, that avoids the referral to the MAC block names which were incorrect for FMan v3 devices (i.e. DTSEC, TGEC) and had weird formatting (i.e. FM1@DTSEC6, FM1@TGEC1). The legacy code is left unchanged in this respect. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
1c710187 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: separate receive buffer free code Move the receive buffer free code in a separate function. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
8313cb02 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: change init_phy() param Change the init_phy() parameter to simplify the code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
9b2e892e |
|
04-May-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: minor fix in DM ETH support Bus callback functions for read/write/reset need to be set only for DM_ETH, moving endif a bit lower. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f7ae49fc |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop log.h from common header Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e6f6f9e6 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop part.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
6eb32a03 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: add DM ETH support Probe the FMan MACs based on the device tree while retaining the legacy code/functionality. One notable change introduced here is that, for DM_ETH, the name of the interfaces is corrected to the fmX-macY format, that avoids the referral to the MAC block names which were incorrect for FMan v3 devices (i.e. DTSEC, TGEC) and had weird formatting (i.e. FM1@DTSEC6, FM1@TGEC1). The legacy code is left unchanged in this respect. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
1c710187 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: separate receive buffer free code Move the receive buffer free code in a separate function. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
8313cb02 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: change init_phy() param Change the init_phy() parameter to simplify the code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
9b2e892e |
|
04-May-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: minor fix in DM ETH support Bus callback functions for read/write/reset need to be set only for DM_ETH, moving endif a bit lower. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f7ae49fc |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop log.h from common header Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e6f6f9e6 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop part.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
6eb32a03 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: add DM ETH support Probe the FMan MACs based on the device tree while retaining the legacy code/functionality. One notable change introduced here is that, for DM_ETH, the name of the interfaces is corrected to the fmX-macY format, that avoids the referral to the MAC block names which were incorrect for FMan v3 devices (i.e. DTSEC, TGEC) and had weird formatting (i.e. FM1@DTSEC6, FM1@TGEC1). The legacy code is left unchanged in this respect. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
1c710187 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: separate receive buffer free code Move the receive buffer free code in a separate function. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
8313cb02 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: change init_phy() param Change the init_phy() parameter to simplify the code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
9b2e892e |
|
04-May-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: minor fix in DM ETH support Bus callback functions for read/write/reset need to be set only for DM_ETH, moving endif a bit lower. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f7ae49fc |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop log.h from common header Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e6f6f9e6 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop part.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
6eb32a03 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: add DM ETH support Probe the FMan MACs based on the device tree while retaining the legacy code/functionality. One notable change introduced here is that, for DM_ETH, the name of the interfaces is corrected to the fmX-macY format, that avoids the referral to the MAC block names which were incorrect for FMan v3 devices (i.e. DTSEC, TGEC) and had weird formatting (i.e. FM1@DTSEC6, FM1@TGEC1). The legacy code is left unchanged in this respect. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
1c710187 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: separate receive buffer free code Move the receive buffer free code in a separate function. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
8313cb02 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: change init_phy() param Change the init_phy() parameter to simplify the code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
9b2e892e |
|
04-May-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: minor fix in DM ETH support Bus callback functions for read/write/reset need to be set only for DM_ETH, moving endif a bit lower. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f7ae49fc |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop log.h from common header Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e6f6f9e6 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop part.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
6eb32a03 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: add DM ETH support Probe the FMan MACs based on the device tree while retaining the legacy code/functionality. One notable change introduced here is that, for DM_ETH, the name of the interfaces is corrected to the fmX-macY format, that avoids the referral to the MAC block names which were incorrect for FMan v3 devices (i.e. DTSEC, TGEC) and had weird formatting (i.e. FM1@DTSEC6, FM1@TGEC1). The legacy code is left unchanged in this respect. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
1c710187 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: separate receive buffer free code Move the receive buffer free code in a separate function. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
8313cb02 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: change init_phy() param Change the init_phy() parameter to simplify the code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
9b2e892e |
|
04-May-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: minor fix in DM ETH support Bus callback functions for read/write/reset need to be set only for DM_ETH, moving endif a bit lower. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f7ae49fc |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop log.h from common header Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e6f6f9e6 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop part.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
6eb32a03 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: add DM ETH support Probe the FMan MACs based on the device tree while retaining the legacy code/functionality. One notable change introduced here is that, for DM_ETH, the name of the interfaces is corrected to the fmX-macY format, that avoids the referral to the MAC block names which were incorrect for FMan v3 devices (i.e. DTSEC, TGEC) and had weird formatting (i.e. FM1@DTSEC6, FM1@TGEC1). The legacy code is left unchanged in this respect. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
1c710187 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: separate receive buffer free code Move the receive buffer free code in a separate function. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
8313cb02 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: change init_phy() param Change the init_phy() parameter to simplify the code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
9b2e892e |
|
04-May-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: minor fix in DM ETH support Bus callback functions for read/write/reset need to be set only for DM_ETH, moving endif a bit lower. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f7ae49fc |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop log.h from common header Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e6f6f9e6 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop part.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
6eb32a03 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: add DM ETH support Probe the FMan MACs based on the device tree while retaining the legacy code/functionality. One notable change introduced here is that, for DM_ETH, the name of the interfaces is corrected to the fmX-macY format, that avoids the referral to the MAC block names which were incorrect for FMan v3 devices (i.e. DTSEC, TGEC) and had weird formatting (i.e. FM1@DTSEC6, FM1@TGEC1). The legacy code is left unchanged in this respect. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
1c710187 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: separate receive buffer free code Move the receive buffer free code in a separate function. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
8313cb02 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: change init_phy() param Change the init_phy() parameter to simplify the code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
9b2e892e |
|
04-May-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: minor fix in DM ETH support Bus callback functions for read/write/reset need to be set only for DM_ETH, moving endif a bit lower. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f7ae49fc |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop log.h from common header Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e6f6f9e6 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop part.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
6eb32a03 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: add DM ETH support Probe the FMan MACs based on the device tree while retaining the legacy code/functionality. One notable change introduced here is that, for DM_ETH, the name of the interfaces is corrected to the fmX-macY format, that avoids the referral to the MAC block names which were incorrect for FMan v3 devices (i.e. DTSEC, TGEC) and had weird formatting (i.e. FM1@DTSEC6, FM1@TGEC1). The legacy code is left unchanged in this respect. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
1c710187 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: separate receive buffer free code Move the receive buffer free code in a separate function. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
8313cb02 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: change init_phy() param Change the init_phy() parameter to simplify the code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
9b2e892e |
|
04-May-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: minor fix in DM ETH support Bus callback functions for read/write/reset need to be set only for DM_ETH, moving endif a bit lower. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f7ae49fc |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop log.h from common header Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e6f6f9e6 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop part.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
6eb32a03 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: add DM ETH support Probe the FMan MACs based on the device tree while retaining the legacy code/functionality. One notable change introduced here is that, for DM_ETH, the name of the interfaces is corrected to the fmX-macY format, that avoids the referral to the MAC block names which were incorrect for FMan v3 devices (i.e. DTSEC, TGEC) and had weird formatting (i.e. FM1@DTSEC6, FM1@TGEC1). The legacy code is left unchanged in this respect. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
1c710187 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: separate receive buffer free code Move the receive buffer free code in a separate function. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
8313cb02 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: change init_phy() param Change the init_phy() parameter to simplify the code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
9b2e892e |
|
04-May-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: minor fix in DM ETH support Bus callback functions for read/write/reset need to be set only for DM_ETH, moving endif a bit lower. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f7ae49fc |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop log.h from common header Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e6f6f9e6 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop part.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
6eb32a03 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: add DM ETH support Probe the FMan MACs based on the device tree while retaining the legacy code/functionality. One notable change introduced here is that, for DM_ETH, the name of the interfaces is corrected to the fmX-macY format, that avoids the referral to the MAC block names which were incorrect for FMan v3 devices (i.e. DTSEC, TGEC) and had weird formatting (i.e. FM1@DTSEC6, FM1@TGEC1). The legacy code is left unchanged in this respect. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
1c710187 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: separate receive buffer free code Move the receive buffer free code in a separate function. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
8313cb02 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: change init_phy() param Change the init_phy() parameter to simplify the code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
9b2e892e |
|
04-May-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: minor fix in DM ETH support Bus callback functions for read/write/reset need to be set only for DM_ETH, moving endif a bit lower. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f7ae49fc |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop log.h from common header Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e6f6f9e6 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop part.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
6eb32a03 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: add DM ETH support Probe the FMan MACs based on the device tree while retaining the legacy code/functionality. One notable change introduced here is that, for DM_ETH, the name of the interfaces is corrected to the fmX-macY format, that avoids the referral to the MAC block names which were incorrect for FMan v3 devices (i.e. DTSEC, TGEC) and had weird formatting (i.e. FM1@DTSEC6, FM1@TGEC1). The legacy code is left unchanged in this respect. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
1c710187 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: separate receive buffer free code Move the receive buffer free code in a separate function. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
8313cb02 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: change init_phy() param Change the init_phy() parameter to simplify the code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
9b2e892e |
|
04-May-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: minor fix in DM ETH support Bus callback functions for read/write/reset need to be set only for DM_ETH, moving endif a bit lower. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f7ae49fc |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop log.h from common header Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e6f6f9e6 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop part.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
6eb32a03 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: add DM ETH support Probe the FMan MACs based on the device tree while retaining the legacy code/functionality. One notable change introduced here is that, for DM_ETH, the name of the interfaces is corrected to the fmX-macY format, that avoids the referral to the MAC block names which were incorrect for FMan v3 devices (i.e. DTSEC, TGEC) and had weird formatting (i.e. FM1@DTSEC6, FM1@TGEC1). The legacy code is left unchanged in this respect. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
1c710187 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: separate receive buffer free code Move the receive buffer free code in a separate function. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
8313cb02 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: change init_phy() param Change the init_phy() parameter to simplify the code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
9b2e892e |
|
04-May-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: minor fix in DM ETH support Bus callback functions for read/write/reset need to be set only for DM_ETH, moving endif a bit lower. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f7ae49fc |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop log.h from common header Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e6f6f9e6 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop part.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
6eb32a03 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: add DM ETH support Probe the FMan MACs based on the device tree while retaining the legacy code/functionality. One notable change introduced here is that, for DM_ETH, the name of the interfaces is corrected to the fmX-macY format, that avoids the referral to the MAC block names which were incorrect for FMan v3 devices (i.e. DTSEC, TGEC) and had weird formatting (i.e. FM1@DTSEC6, FM1@TGEC1). The legacy code is left unchanged in this respect. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
1c710187 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: separate receive buffer free code Move the receive buffer free code in a separate function. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
8313cb02 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: change init_phy() param Change the init_phy() parameter to simplify the code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
9b2e892e |
|
04-May-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: minor fix in DM ETH support Bus callback functions for read/write/reset need to be set only for DM_ETH, moving endif a bit lower. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f7ae49fc |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop log.h from common header Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e6f6f9e6 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop part.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
6eb32a03 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: add DM ETH support Probe the FMan MACs based on the device tree while retaining the legacy code/functionality. One notable change introduced here is that, for DM_ETH, the name of the interfaces is corrected to the fmX-macY format, that avoids the referral to the MAC block names which were incorrect for FMan v3 devices (i.e. DTSEC, TGEC) and had weird formatting (i.e. FM1@DTSEC6, FM1@TGEC1). The legacy code is left unchanged in this respect. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
1c710187 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: separate receive buffer free code Move the receive buffer free code in a separate function. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
8313cb02 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: change init_phy() param Change the init_phy() parameter to simplify the code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
9b2e892e |
|
04-May-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: minor fix in DM ETH support Bus callback functions for read/write/reset need to be set only for DM_ETH, moving endif a bit lower. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f7ae49fc |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop log.h from common header Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e6f6f9e6 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop part.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
6eb32a03 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: add DM ETH support Probe the FMan MACs based on the device tree while retaining the legacy code/functionality. One notable change introduced here is that, for DM_ETH, the name of the interfaces is corrected to the fmX-macY format, that avoids the referral to the MAC block names which were incorrect for FMan v3 devices (i.e. DTSEC, TGEC) and had weird formatting (i.e. FM1@DTSEC6, FM1@TGEC1). The legacy code is left unchanged in this respect. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
1c710187 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: separate receive buffer free code Move the receive buffer free code in a separate function. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
8313cb02 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: change init_phy() param Change the init_phy() parameter to simplify the code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
9b2e892e |
|
04-May-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: minor fix in DM ETH support Bus callback functions for read/write/reset need to be set only for DM_ETH, moving endif a bit lower. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f7ae49fc |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop log.h from common header Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e6f6f9e6 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop part.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
6eb32a03 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: add DM ETH support Probe the FMan MACs based on the device tree while retaining the legacy code/functionality. One notable change introduced here is that, for DM_ETH, the name of the interfaces is corrected to the fmX-macY format, that avoids the referral to the MAC block names which were incorrect for FMan v3 devices (i.e. DTSEC, TGEC) and had weird formatting (i.e. FM1@DTSEC6, FM1@TGEC1). The legacy code is left unchanged in this respect. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
1c710187 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: separate receive buffer free code Move the receive buffer free code in a separate function. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
8313cb02 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: change init_phy() param Change the init_phy() parameter to simplify the code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
9b2e892e |
|
04-May-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: minor fix in DM ETH support Bus callback functions for read/write/reset need to be set only for DM_ETH, moving endif a bit lower. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f7ae49fc |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop log.h from common header Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e6f6f9e6 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop part.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
6eb32a03 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: add DM ETH support Probe the FMan MACs based on the device tree while retaining the legacy code/functionality. One notable change introduced here is that, for DM_ETH, the name of the interfaces is corrected to the fmX-macY format, that avoids the referral to the MAC block names which were incorrect for FMan v3 devices (i.e. DTSEC, TGEC) and had weird formatting (i.e. FM1@DTSEC6, FM1@TGEC1). The legacy code is left unchanged in this respect. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
1c710187 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: separate receive buffer free code Move the receive buffer free code in a separate function. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
8313cb02 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: change init_phy() param Change the init_phy() parameter to simplify the code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
9b2e892e |
|
04-May-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: minor fix in DM ETH support Bus callback functions for read/write/reset need to be set only for DM_ETH, moving endif a bit lower. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f7ae49fc |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop log.h from common header Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e6f6f9e6 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop part.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
6eb32a03 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: add DM ETH support Probe the FMan MACs based on the device tree while retaining the legacy code/functionality. One notable change introduced here is that, for DM_ETH, the name of the interfaces is corrected to the fmX-macY format, that avoids the referral to the MAC block names which were incorrect for FMan v3 devices (i.e. DTSEC, TGEC) and had weird formatting (i.e. FM1@DTSEC6, FM1@TGEC1). The legacy code is left unchanged in this respect. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
1c710187 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: separate receive buffer free code Move the receive buffer free code in a separate function. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
8313cb02 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: change init_phy() param Change the init_phy() parameter to simplify the code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
9b2e892e |
|
04-May-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: minor fix in DM ETH support Bus callback functions for read/write/reset need to be set only for DM_ETH, moving endif a bit lower. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f7ae49fc |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop log.h from common header Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e6f6f9e6 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop part.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
6eb32a03 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: add DM ETH support Probe the FMan MACs based on the device tree while retaining the legacy code/functionality. One notable change introduced here is that, for DM_ETH, the name of the interfaces is corrected to the fmX-macY format, that avoids the referral to the MAC block names which were incorrect for FMan v3 devices (i.e. DTSEC, TGEC) and had weird formatting (i.e. FM1@DTSEC6, FM1@TGEC1). The legacy code is left unchanged in this respect. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
1c710187 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: separate receive buffer free code Move the receive buffer free code in a separate function. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
8313cb02 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: change init_phy() param Change the init_phy() parameter to simplify the code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
9b2e892e |
|
04-May-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: minor fix in DM ETH support Bus callback functions for read/write/reset need to be set only for DM_ETH, moving endif a bit lower. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f7ae49fc |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop log.h from common header Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e6f6f9e6 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop part.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
6eb32a03 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: add DM ETH support Probe the FMan MACs based on the device tree while retaining the legacy code/functionality. One notable change introduced here is that, for DM_ETH, the name of the interfaces is corrected to the fmX-macY format, that avoids the referral to the MAC block names which were incorrect for FMan v3 devices (i.e. DTSEC, TGEC) and had weird formatting (i.e. FM1@DTSEC6, FM1@TGEC1). The legacy code is left unchanged in this respect. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
1c710187 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: separate receive buffer free code Move the receive buffer free code in a separate function. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
8313cb02 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: change init_phy() param Change the init_phy() parameter to simplify the code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
9b2e892e |
|
04-May-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: minor fix in DM ETH support Bus callback functions for read/write/reset need to be set only for DM_ETH, moving endif a bit lower. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f7ae49fc |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop log.h from common header Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e6f6f9e6 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop part.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
6eb32a03 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: add DM ETH support Probe the FMan MACs based on the device tree while retaining the legacy code/functionality. One notable change introduced here is that, for DM_ETH, the name of the interfaces is corrected to the fmX-macY format, that avoids the referral to the MAC block names which were incorrect for FMan v3 devices (i.e. DTSEC, TGEC) and had weird formatting (i.e. FM1@DTSEC6, FM1@TGEC1). The legacy code is left unchanged in this respect. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
1c710187 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: separate receive buffer free code Move the receive buffer free code in a separate function. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
8313cb02 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: change init_phy() param Change the init_phy() parameter to simplify the code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
9b2e892e |
|
04-May-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: minor fix in DM ETH support Bus callback functions for read/write/reset need to be set only for DM_ETH, moving endif a bit lower. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f7ae49fc |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop log.h from common header Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e6f6f9e6 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop part.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
6eb32a03 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: add DM ETH support Probe the FMan MACs based on the device tree while retaining the legacy code/functionality. One notable change introduced here is that, for DM_ETH, the name of the interfaces is corrected to the fmX-macY format, that avoids the referral to the MAC block names which were incorrect for FMan v3 devices (i.e. DTSEC, TGEC) and had weird formatting (i.e. FM1@DTSEC6, FM1@TGEC1). The legacy code is left unchanged in this respect. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
1c710187 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: separate receive buffer free code Move the receive buffer free code in a separate function. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
8313cb02 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: change init_phy() param Change the init_phy() parameter to simplify the code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
9b2e892e |
|
04-May-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: minor fix in DM ETH support Bus callback functions for read/write/reset need to be set only for DM_ETH, moving endif a bit lower. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f7ae49fc |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop log.h from common header Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e6f6f9e6 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop part.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
6eb32a03 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: add DM ETH support Probe the FMan MACs based on the device tree while retaining the legacy code/functionality. One notable change introduced here is that, for DM_ETH, the name of the interfaces is corrected to the fmX-macY format, that avoids the referral to the MAC block names which were incorrect for FMan v3 devices (i.e. DTSEC, TGEC) and had weird formatting (i.e. FM1@DTSEC6, FM1@TGEC1). The legacy code is left unchanged in this respect. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
1c710187 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: separate receive buffer free code Move the receive buffer free code in a separate function. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
8313cb02 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: change init_phy() param Change the init_phy() parameter to simplify the code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
9b2e892e |
|
04-May-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: minor fix in DM ETH support Bus callback functions for read/write/reset need to be set only for DM_ETH, moving endif a bit lower. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f7ae49fc |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop log.h from common header Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e6f6f9e6 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop part.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
6eb32a03 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: add DM ETH support Probe the FMan MACs based on the device tree while retaining the legacy code/functionality. One notable change introduced here is that, for DM_ETH, the name of the interfaces is corrected to the fmX-macY format, that avoids the referral to the MAC block names which were incorrect for FMan v3 devices (i.e. DTSEC, TGEC) and had weird formatting (i.e. FM1@DTSEC6, FM1@TGEC1). The legacy code is left unchanged in this respect. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
1c710187 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: separate receive buffer free code Move the receive buffer free code in a separate function. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
8313cb02 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: change init_phy() param Change the init_phy() parameter to simplify the code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
9b2e892e |
|
04-May-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: minor fix in DM ETH support Bus callback functions for read/write/reset need to be set only for DM_ETH, moving endif a bit lower. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f7ae49fc |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop log.h from common header Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e6f6f9e6 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop part.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
6eb32a03 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: add DM ETH support Probe the FMan MACs based on the device tree while retaining the legacy code/functionality. One notable change introduced here is that, for DM_ETH, the name of the interfaces is corrected to the fmX-macY format, that avoids the referral to the MAC block names which were incorrect for FMan v3 devices (i.e. DTSEC, TGEC) and had weird formatting (i.e. FM1@DTSEC6, FM1@TGEC1). The legacy code is left unchanged in this respect. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
1c710187 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: separate receive buffer free code Move the receive buffer free code in a separate function. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
8313cb02 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: change init_phy() param Change the init_phy() parameter to simplify the code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
9b2e892e |
|
04-May-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: minor fix in DM ETH support Bus callback functions for read/write/reset need to be set only for DM_ETH, moving endif a bit lower. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f7ae49fc |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop log.h from common header Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e6f6f9e6 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop part.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
6eb32a03 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: add DM ETH support Probe the FMan MACs based on the device tree while retaining the legacy code/functionality. One notable change introduced here is that, for DM_ETH, the name of the interfaces is corrected to the fmX-macY format, that avoids the referral to the MAC block names which were incorrect for FMan v3 devices (i.e. DTSEC, TGEC) and had weird formatting (i.e. FM1@DTSEC6, FM1@TGEC1). The legacy code is left unchanged in this respect. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
1c710187 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: separate receive buffer free code Move the receive buffer free code in a separate function. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
8313cb02 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: change init_phy() param Change the init_phy() parameter to simplify the code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
9b2e892e |
|
04-May-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: minor fix in DM ETH support Bus callback functions for read/write/reset need to be set only for DM_ETH, moving endif a bit lower. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f7ae49fc |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop log.h from common header Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e6f6f9e6 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop part.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
6eb32a03 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: add DM ETH support Probe the FMan MACs based on the device tree while retaining the legacy code/functionality. One notable change introduced here is that, for DM_ETH, the name of the interfaces is corrected to the fmX-macY format, that avoids the referral to the MAC block names which were incorrect for FMan v3 devices (i.e. DTSEC, TGEC) and had weird formatting (i.e. FM1@DTSEC6, FM1@TGEC1). The legacy code is left unchanged in this respect. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
1c710187 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: separate receive buffer free code Move the receive buffer free code in a separate function. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
8313cb02 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: change init_phy() param Change the init_phy() parameter to simplify the code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
9b2e892e |
|
04-May-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: minor fix in DM ETH support Bus callback functions for read/write/reset need to be set only for DM_ETH, moving endif a bit lower. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f7ae49fc |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop log.h from common header Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e6f6f9e6 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop part.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
6eb32a03 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: add DM ETH support Probe the FMan MACs based on the device tree while retaining the legacy code/functionality. One notable change introduced here is that, for DM_ETH, the name of the interfaces is corrected to the fmX-macY format, that avoids the referral to the MAC block names which were incorrect for FMan v3 devices (i.e. DTSEC, TGEC) and had weird formatting (i.e. FM1@DTSEC6, FM1@TGEC1). The legacy code is left unchanged in this respect. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
1c710187 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: separate receive buffer free code Move the receive buffer free code in a separate function. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
8313cb02 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: change init_phy() param Change the init_phy() parameter to simplify the code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
9b2e892e |
|
04-May-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: minor fix in DM ETH support Bus callback functions for read/write/reset need to be set only for DM_ETH, moving endif a bit lower. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f7ae49fc |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop log.h from common header Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e6f6f9e6 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop part.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
6eb32a03 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: add DM ETH support Probe the FMan MACs based on the device tree while retaining the legacy code/functionality. One notable change introduced here is that, for DM_ETH, the name of the interfaces is corrected to the fmX-macY format, that avoids the referral to the MAC block names which were incorrect for FMan v3 devices (i.e. DTSEC, TGEC) and had weird formatting (i.e. FM1@DTSEC6, FM1@TGEC1). The legacy code is left unchanged in this respect. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
1c710187 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: separate receive buffer free code Move the receive buffer free code in a separate function. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
8313cb02 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: change init_phy() param Change the init_phy() parameter to simplify the code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
9b2e892e |
|
04-May-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: minor fix in DM ETH support Bus callback functions for read/write/reset need to be set only for DM_ETH, moving endif a bit lower. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f7ae49fc |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop log.h from common header Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e6f6f9e6 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop part.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
6eb32a03 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: add DM ETH support Probe the FMan MACs based on the device tree while retaining the legacy code/functionality. One notable change introduced here is that, for DM_ETH, the name of the interfaces is corrected to the fmX-macY format, that avoids the referral to the MAC block names which were incorrect for FMan v3 devices (i.e. DTSEC, TGEC) and had weird formatting (i.e. FM1@DTSEC6, FM1@TGEC1). The legacy code is left unchanged in this respect. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
1c710187 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: separate receive buffer free code Move the receive buffer free code in a separate function. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
8313cb02 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: change init_phy() param Change the init_phy() parameter to simplify the code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
9b2e892e |
|
04-May-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: minor fix in DM ETH support Bus callback functions for read/write/reset need to be set only for DM_ETH, moving endif a bit lower. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f7ae49fc |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop log.h from common header Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e6f6f9e6 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop part.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
6eb32a03 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: add DM ETH support Probe the FMan MACs based on the device tree while retaining the legacy code/functionality. One notable change introduced here is that, for DM_ETH, the name of the interfaces is corrected to the fmX-macY format, that avoids the referral to the MAC block names which were incorrect for FMan v3 devices (i.e. DTSEC, TGEC) and had weird formatting (i.e. FM1@DTSEC6, FM1@TGEC1). The legacy code is left unchanged in this respect. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
1c710187 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: separate receive buffer free code Move the receive buffer free code in a separate function. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
8313cb02 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: change init_phy() param Change the init_phy() parameter to simplify the code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
9b2e892e |
|
04-May-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: minor fix in DM ETH support Bus callback functions for read/write/reset need to be set only for DM_ETH, moving endif a bit lower. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f7ae49fc |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop log.h from common header Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e6f6f9e6 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop part.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
6eb32a03 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: add DM ETH support Probe the FMan MACs based on the device tree while retaining the legacy code/functionality. One notable change introduced here is that, for DM_ETH, the name of the interfaces is corrected to the fmX-macY format, that avoids the referral to the MAC block names which were incorrect for FMan v3 devices (i.e. DTSEC, TGEC) and had weird formatting (i.e. FM1@DTSEC6, FM1@TGEC1). The legacy code is left unchanged in this respect. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
1c710187 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: separate receive buffer free code Move the receive buffer free code in a separate function. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
8313cb02 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: change init_phy() param Change the init_phy() parameter to simplify the code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
9b2e892e |
|
04-May-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: minor fix in DM ETH support Bus callback functions for read/write/reset need to be set only for DM_ETH, moving endif a bit lower. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f7ae49fc |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop log.h from common header Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e6f6f9e6 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop part.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
6eb32a03 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: add DM ETH support Probe the FMan MACs based on the device tree while retaining the legacy code/functionality. One notable change introduced here is that, for DM_ETH, the name of the interfaces is corrected to the fmX-macY format, that avoids the referral to the MAC block names which were incorrect for FMan v3 devices (i.e. DTSEC, TGEC) and had weird formatting (i.e. FM1@DTSEC6, FM1@TGEC1). The legacy code is left unchanged in this respect. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
1c710187 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: separate receive buffer free code Move the receive buffer free code in a separate function. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
8313cb02 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: change init_phy() param Change the init_phy() parameter to simplify the code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
9b2e892e |
|
04-May-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: minor fix in DM ETH support Bus callback functions for read/write/reset need to be set only for DM_ETH, moving endif a bit lower. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f7ae49fc |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop log.h from common header Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e6f6f9e6 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop part.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
6eb32a03 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: add DM ETH support Probe the FMan MACs based on the device tree while retaining the legacy code/functionality. One notable change introduced here is that, for DM_ETH, the name of the interfaces is corrected to the fmX-macY format, that avoids the referral to the MAC block names which were incorrect for FMan v3 devices (i.e. DTSEC, TGEC) and had weird formatting (i.e. FM1@DTSEC6, FM1@TGEC1). The legacy code is left unchanged in this respect. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
1c710187 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: separate receive buffer free code Move the receive buffer free code in a separate function. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
8313cb02 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: change init_phy() param Change the init_phy() parameter to simplify the code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
9b2e892e |
|
04-May-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: minor fix in DM ETH support Bus callback functions for read/write/reset need to be set only for DM_ETH, moving endif a bit lower. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f7ae49fc |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop log.h from common header Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e6f6f9e6 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop part.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
6eb32a03 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: add DM ETH support Probe the FMan MACs based on the device tree while retaining the legacy code/functionality. One notable change introduced here is that, for DM_ETH, the name of the interfaces is corrected to the fmX-macY format, that avoids the referral to the MAC block names which were incorrect for FMan v3 devices (i.e. DTSEC, TGEC) and had weird formatting (i.e. FM1@DTSEC6, FM1@TGEC1). The legacy code is left unchanged in this respect. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
1c710187 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: separate receive buffer free code Move the receive buffer free code in a separate function. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
8313cb02 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: change init_phy() param Change the init_phy() parameter to simplify the code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
9b2e892e |
|
04-May-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: minor fix in DM ETH support Bus callback functions for read/write/reset need to be set only for DM_ETH, moving endif a bit lower. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f7ae49fc |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop log.h from common header Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e6f6f9e6 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop part.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
6eb32a03 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: add DM ETH support Probe the FMan MACs based on the device tree while retaining the legacy code/functionality. One notable change introduced here is that, for DM_ETH, the name of the interfaces is corrected to the fmX-macY format, that avoids the referral to the MAC block names which were incorrect for FMan v3 devices (i.e. DTSEC, TGEC) and had weird formatting (i.e. FM1@DTSEC6, FM1@TGEC1). The legacy code is left unchanged in this respect. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
1c710187 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: separate receive buffer free code Move the receive buffer free code in a separate function. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
8313cb02 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: change init_phy() param Change the init_phy() parameter to simplify the code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
9b2e892e |
|
04-May-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: minor fix in DM ETH support Bus callback functions for read/write/reset need to be set only for DM_ETH, moving endif a bit lower. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f7ae49fc |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop log.h from common header Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e6f6f9e6 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop part.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
6eb32a03 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: add DM ETH support Probe the FMan MACs based on the device tree while retaining the legacy code/functionality. One notable change introduced here is that, for DM_ETH, the name of the interfaces is corrected to the fmX-macY format, that avoids the referral to the MAC block names which were incorrect for FMan v3 devices (i.e. DTSEC, TGEC) and had weird formatting (i.e. FM1@DTSEC6, FM1@TGEC1). The legacy code is left unchanged in this respect. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
1c710187 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: separate receive buffer free code Move the receive buffer free code in a separate function. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
8313cb02 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: change init_phy() param Change the init_phy() parameter to simplify the code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
9b2e892e |
|
04-May-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: minor fix in DM ETH support Bus callback functions for read/write/reset need to be set only for DM_ETH, moving endif a bit lower. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f7ae49fc |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop log.h from common header Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e6f6f9e6 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop part.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
6eb32a03 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: add DM ETH support Probe the FMan MACs based on the device tree while retaining the legacy code/functionality. One notable change introduced here is that, for DM_ETH, the name of the interfaces is corrected to the fmX-macY format, that avoids the referral to the MAC block names which were incorrect for FMan v3 devices (i.e. DTSEC, TGEC) and had weird formatting (i.e. FM1@DTSEC6, FM1@TGEC1). The legacy code is left unchanged in this respect. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
1c710187 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: separate receive buffer free code Move the receive buffer free code in a separate function. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
8313cb02 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: change init_phy() param Change the init_phy() parameter to simplify the code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
9b2e892e |
|
04-May-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: minor fix in DM ETH support Bus callback functions for read/write/reset need to be set only for DM_ETH, moving endif a bit lower. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f7ae49fc |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop log.h from common header Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e6f6f9e6 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop part.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
6eb32a03 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: add DM ETH support Probe the FMan MACs based on the device tree while retaining the legacy code/functionality. One notable change introduced here is that, for DM_ETH, the name of the interfaces is corrected to the fmX-macY format, that avoids the referral to the MAC block names which were incorrect for FMan v3 devices (i.e. DTSEC, TGEC) and had weird formatting (i.e. FM1@DTSEC6, FM1@TGEC1). The legacy code is left unchanged in this respect. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
1c710187 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: separate receive buffer free code Move the receive buffer free code in a separate function. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
8313cb02 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: change init_phy() param Change the init_phy() parameter to simplify the code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
9b2e892e |
|
04-May-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: minor fix in DM ETH support Bus callback functions for read/write/reset need to be set only for DM_ETH, moving endif a bit lower. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f7ae49fc |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop log.h from common header Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e6f6f9e6 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop part.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
6eb32a03 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: add DM ETH support Probe the FMan MACs based on the device tree while retaining the legacy code/functionality. One notable change introduced here is that, for DM_ETH, the name of the interfaces is corrected to the fmX-macY format, that avoids the referral to the MAC block names which were incorrect for FMan v3 devices (i.e. DTSEC, TGEC) and had weird formatting (i.e. FM1@DTSEC6, FM1@TGEC1). The legacy code is left unchanged in this respect. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
1c710187 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: separate receive buffer free code Move the receive buffer free code in a separate function. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
8313cb02 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: change init_phy() param Change the init_phy() parameter to simplify the code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
9b2e892e |
|
04-May-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: minor fix in DM ETH support Bus callback functions for read/write/reset need to be set only for DM_ETH, moving endif a bit lower. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f7ae49fc |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop log.h from common header Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e6f6f9e6 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop part.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
6eb32a03 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: add DM ETH support Probe the FMan MACs based on the device tree while retaining the legacy code/functionality. One notable change introduced here is that, for DM_ETH, the name of the interfaces is corrected to the fmX-macY format, that avoids the referral to the MAC block names which were incorrect for FMan v3 devices (i.e. DTSEC, TGEC) and had weird formatting (i.e. FM1@DTSEC6, FM1@TGEC1). The legacy code is left unchanged in this respect. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
1c710187 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: separate receive buffer free code Move the receive buffer free code in a separate function. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
8313cb02 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: change init_phy() param Change the init_phy() parameter to simplify the code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
9b2e892e |
|
04-May-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: minor fix in DM ETH support Bus callback functions for read/write/reset need to be set only for DM_ETH, moving endif a bit lower. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f7ae49fc |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop log.h from common header Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e6f6f9e6 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop part.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
6eb32a03 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: add DM ETH support Probe the FMan MACs based on the device tree while retaining the legacy code/functionality. One notable change introduced here is that, for DM_ETH, the name of the interfaces is corrected to the fmX-macY format, that avoids the referral to the MAC block names which were incorrect for FMan v3 devices (i.e. DTSEC, TGEC) and had weird formatting (i.e. FM1@DTSEC6, FM1@TGEC1). The legacy code is left unchanged in this respect. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
1c710187 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: separate receive buffer free code Move the receive buffer free code in a separate function. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
8313cb02 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: change init_phy() param Change the init_phy() parameter to simplify the code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
9b2e892e |
|
04-May-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: minor fix in DM ETH support Bus callback functions for read/write/reset need to be set only for DM_ETH, moving endif a bit lower. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f7ae49fc |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop log.h from common header Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e6f6f9e6 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop part.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
6eb32a03 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: add DM ETH support Probe the FMan MACs based on the device tree while retaining the legacy code/functionality. One notable change introduced here is that, for DM_ETH, the name of the interfaces is corrected to the fmX-macY format, that avoids the referral to the MAC block names which were incorrect for FMan v3 devices (i.e. DTSEC, TGEC) and had weird formatting (i.e. FM1@DTSEC6, FM1@TGEC1). The legacy code is left unchanged in this respect. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
1c710187 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: separate receive buffer free code Move the receive buffer free code in a separate function. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
8313cb02 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: change init_phy() param Change the init_phy() parameter to simplify the code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
9b2e892e |
|
04-May-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: minor fix in DM ETH support Bus callback functions for read/write/reset need to be set only for DM_ETH, moving endif a bit lower. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f7ae49fc |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop log.h from common header Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e6f6f9e6 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop part.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
6eb32a03 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: add DM ETH support Probe the FMan MACs based on the device tree while retaining the legacy code/functionality. One notable change introduced here is that, for DM_ETH, the name of the interfaces is corrected to the fmX-macY format, that avoids the referral to the MAC block names which were incorrect for FMan v3 devices (i.e. DTSEC, TGEC) and had weird formatting (i.e. FM1@DTSEC6, FM1@TGEC1). The legacy code is left unchanged in this respect. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
1c710187 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: separate receive buffer free code Move the receive buffer free code in a separate function. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
8313cb02 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: change init_phy() param Change the init_phy() parameter to simplify the code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
9b2e892e |
|
04-May-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: minor fix in DM ETH support Bus callback functions for read/write/reset need to be set only for DM_ETH, moving endif a bit lower. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f7ae49fc |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop log.h from common header Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e6f6f9e6 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop part.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
6eb32a03 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: add DM ETH support Probe the FMan MACs based on the device tree while retaining the legacy code/functionality. One notable change introduced here is that, for DM_ETH, the name of the interfaces is corrected to the fmX-macY format, that avoids the referral to the MAC block names which were incorrect for FMan v3 devices (i.e. DTSEC, TGEC) and had weird formatting (i.e. FM1@DTSEC6, FM1@TGEC1). The legacy code is left unchanged in this respect. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
1c710187 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: separate receive buffer free code Move the receive buffer free code in a separate function. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
8313cb02 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: change init_phy() param Change the init_phy() parameter to simplify the code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
9b2e892e |
|
04-May-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: minor fix in DM ETH support Bus callback functions for read/write/reset need to be set only for DM_ETH, moving endif a bit lower. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f7ae49fc |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop log.h from common header Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e6f6f9e6 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop part.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
6eb32a03 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: add DM ETH support Probe the FMan MACs based on the device tree while retaining the legacy code/functionality. One notable change introduced here is that, for DM_ETH, the name of the interfaces is corrected to the fmX-macY format, that avoids the referral to the MAC block names which were incorrect for FMan v3 devices (i.e. DTSEC, TGEC) and had weird formatting (i.e. FM1@DTSEC6, FM1@TGEC1). The legacy code is left unchanged in this respect. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
1c710187 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: separate receive buffer free code Move the receive buffer free code in a separate function. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
8313cb02 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: change init_phy() param Change the init_phy() parameter to simplify the code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
9b2e892e |
|
04-May-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: minor fix in DM ETH support Bus callback functions for read/write/reset need to be set only for DM_ETH, moving endif a bit lower. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f7ae49fc |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop log.h from common header Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e6f6f9e6 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop part.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
6eb32a03 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: add DM ETH support Probe the FMan MACs based on the device tree while retaining the legacy code/functionality. One notable change introduced here is that, for DM_ETH, the name of the interfaces is corrected to the fmX-macY format, that avoids the referral to the MAC block names which were incorrect for FMan v3 devices (i.e. DTSEC, TGEC) and had weird formatting (i.e. FM1@DTSEC6, FM1@TGEC1). The legacy code is left unchanged in this respect. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
1c710187 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: separate receive buffer free code Move the receive buffer free code in a separate function. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
8313cb02 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: change init_phy() param Change the init_phy() parameter to simplify the code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
9b2e892e |
|
04-May-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: minor fix in DM ETH support Bus callback functions for read/write/reset need to be set only for DM_ETH, moving endif a bit lower. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f7ae49fc |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop log.h from common header Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e6f6f9e6 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop part.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
6eb32a03 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: add DM ETH support Probe the FMan MACs based on the device tree while retaining the legacy code/functionality. One notable change introduced here is that, for DM_ETH, the name of the interfaces is corrected to the fmX-macY format, that avoids the referral to the MAC block names which were incorrect for FMan v3 devices (i.e. DTSEC, TGEC) and had weird formatting (i.e. FM1@DTSEC6, FM1@TGEC1). The legacy code is left unchanged in this respect. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
1c710187 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: separate receive buffer free code Move the receive buffer free code in a separate function. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
8313cb02 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: change init_phy() param Change the init_phy() parameter to simplify the code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
9b2e892e |
|
04-May-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: minor fix in DM ETH support Bus callback functions for read/write/reset need to be set only for DM_ETH, moving endif a bit lower. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f7ae49fc |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop log.h from common header Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e6f6f9e6 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop part.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
6eb32a03 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: add DM ETH support Probe the FMan MACs based on the device tree while retaining the legacy code/functionality. One notable change introduced here is that, for DM_ETH, the name of the interfaces is corrected to the fmX-macY format, that avoids the referral to the MAC block names which were incorrect for FMan v3 devices (i.e. DTSEC, TGEC) and had weird formatting (i.e. FM1@DTSEC6, FM1@TGEC1). The legacy code is left unchanged in this respect. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
1c710187 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: separate receive buffer free code Move the receive buffer free code in a separate function. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
8313cb02 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: change init_phy() param Change the init_phy() parameter to simplify the code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
9b2e892e |
|
04-May-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: minor fix in DM ETH support Bus callback functions for read/write/reset need to be set only for DM_ETH, moving endif a bit lower. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f7ae49fc |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop log.h from common header Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e6f6f9e6 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop part.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
6eb32a03 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: add DM ETH support Probe the FMan MACs based on the device tree while retaining the legacy code/functionality. One notable change introduced here is that, for DM_ETH, the name of the interfaces is corrected to the fmX-macY format, that avoids the referral to the MAC block names which were incorrect for FMan v3 devices (i.e. DTSEC, TGEC) and had weird formatting (i.e. FM1@DTSEC6, FM1@TGEC1). The legacy code is left unchanged in this respect. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
1c710187 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: separate receive buffer free code Move the receive buffer free code in a separate function. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
8313cb02 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: change init_phy() param Change the init_phy() parameter to simplify the code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
9b2e892e |
|
04-May-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: minor fix in DM ETH support Bus callback functions for read/write/reset need to be set only for DM_ETH, moving endif a bit lower. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f7ae49fc |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop log.h from common header Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e6f6f9e6 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop part.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
6eb32a03 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: add DM ETH support Probe the FMan MACs based on the device tree while retaining the legacy code/functionality. One notable change introduced here is that, for DM_ETH, the name of the interfaces is corrected to the fmX-macY format, that avoids the referral to the MAC block names which were incorrect for FMan v3 devices (i.e. DTSEC, TGEC) and had weird formatting (i.e. FM1@DTSEC6, FM1@TGEC1). The legacy code is left unchanged in this respect. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
1c710187 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: separate receive buffer free code Move the receive buffer free code in a separate function. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
8313cb02 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: change init_phy() param Change the init_phy() parameter to simplify the code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
9b2e892e |
|
04-May-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: minor fix in DM ETH support Bus callback functions for read/write/reset need to be set only for DM_ETH, moving endif a bit lower. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f7ae49fc |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop log.h from common header Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e6f6f9e6 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop part.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
6eb32a03 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: add DM ETH support Probe the FMan MACs based on the device tree while retaining the legacy code/functionality. One notable change introduced here is that, for DM_ETH, the name of the interfaces is corrected to the fmX-macY format, that avoids the referral to the MAC block names which were incorrect for FMan v3 devices (i.e. DTSEC, TGEC) and had weird formatting (i.e. FM1@DTSEC6, FM1@TGEC1). The legacy code is left unchanged in this respect. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
1c710187 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: separate receive buffer free code Move the receive buffer free code in a separate function. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
8313cb02 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: change init_phy() param Change the init_phy() parameter to simplify the code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
9b2e892e |
|
04-May-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: minor fix in DM ETH support Bus callback functions for read/write/reset need to be set only for DM_ETH, moving endif a bit lower. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f7ae49fc |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop log.h from common header Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e6f6f9e6 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop part.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
6eb32a03 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: add DM ETH support Probe the FMan MACs based on the device tree while retaining the legacy code/functionality. One notable change introduced here is that, for DM_ETH, the name of the interfaces is corrected to the fmX-macY format, that avoids the referral to the MAC block names which were incorrect for FMan v3 devices (i.e. DTSEC, TGEC) and had weird formatting (i.e. FM1@DTSEC6, FM1@TGEC1). The legacy code is left unchanged in this respect. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
1c710187 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: separate receive buffer free code Move the receive buffer free code in a separate function. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
8313cb02 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: change init_phy() param Change the init_phy() parameter to simplify the code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
9b2e892e |
|
04-May-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: minor fix in DM ETH support Bus callback functions for read/write/reset need to be set only for DM_ETH, moving endif a bit lower. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f7ae49fc |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop log.h from common header Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e6f6f9e6 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop part.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
6eb32a03 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: add DM ETH support Probe the FMan MACs based on the device tree while retaining the legacy code/functionality. One notable change introduced here is that, for DM_ETH, the name of the interfaces is corrected to the fmX-macY format, that avoids the referral to the MAC block names which were incorrect for FMan v3 devices (i.e. DTSEC, TGEC) and had weird formatting (i.e. FM1@DTSEC6, FM1@TGEC1). The legacy code is left unchanged in this respect. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
1c710187 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: separate receive buffer free code Move the receive buffer free code in a separate function. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
8313cb02 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: change init_phy() param Change the init_phy() parameter to simplify the code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
9b2e892e |
|
04-May-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: minor fix in DM ETH support Bus callback functions for read/write/reset need to be set only for DM_ETH, moving endif a bit lower. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f7ae49fc |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop log.h from common header Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e6f6f9e6 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop part.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
6eb32a03 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: add DM ETH support Probe the FMan MACs based on the device tree while retaining the legacy code/functionality. One notable change introduced here is that, for DM_ETH, the name of the interfaces is corrected to the fmX-macY format, that avoids the referral to the MAC block names which were incorrect for FMan v3 devices (i.e. DTSEC, TGEC) and had weird formatting (i.e. FM1@DTSEC6, FM1@TGEC1). The legacy code is left unchanged in this respect. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
1c710187 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: separate receive buffer free code Move the receive buffer free code in a separate function. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
8313cb02 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: change init_phy() param Change the init_phy() parameter to simplify the code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
9b2e892e |
|
04-May-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: minor fix in DM ETH support Bus callback functions for read/write/reset need to be set only for DM_ETH, moving endif a bit lower. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f7ae49fc |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop log.h from common header Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e6f6f9e6 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop part.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
6eb32a03 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: add DM ETH support Probe the FMan MACs based on the device tree while retaining the legacy code/functionality. One notable change introduced here is that, for DM_ETH, the name of the interfaces is corrected to the fmX-macY format, that avoids the referral to the MAC block names which were incorrect for FMan v3 devices (i.e. DTSEC, TGEC) and had weird formatting (i.e. FM1@DTSEC6, FM1@TGEC1). The legacy code is left unchanged in this respect. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
1c710187 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: separate receive buffer free code Move the receive buffer free code in a separate function. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
8313cb02 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: change init_phy() param Change the init_phy() parameter to simplify the code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
9b2e892e |
|
04-May-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: minor fix in DM ETH support Bus callback functions for read/write/reset need to be set only for DM_ETH, moving endif a bit lower. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f7ae49fc |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop log.h from common header Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e6f6f9e6 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop part.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
6eb32a03 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: add DM ETH support Probe the FMan MACs based on the device tree while retaining the legacy code/functionality. One notable change introduced here is that, for DM_ETH, the name of the interfaces is corrected to the fmX-macY format, that avoids the referral to the MAC block names which were incorrect for FMan v3 devices (i.e. DTSEC, TGEC) and had weird formatting (i.e. FM1@DTSEC6, FM1@TGEC1). The legacy code is left unchanged in this respect. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
1c710187 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: separate receive buffer free code Move the receive buffer free code in a separate function. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
8313cb02 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: change init_phy() param Change the init_phy() parameter to simplify the code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
9b2e892e |
|
04-May-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: minor fix in DM ETH support Bus callback functions for read/write/reset need to be set only for DM_ETH, moving endif a bit lower. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f7ae49fc |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop log.h from common header Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e6f6f9e6 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop part.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
6eb32a03 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: add DM ETH support Probe the FMan MACs based on the device tree while retaining the legacy code/functionality. One notable change introduced here is that, for DM_ETH, the name of the interfaces is corrected to the fmX-macY format, that avoids the referral to the MAC block names which were incorrect for FMan v3 devices (i.e. DTSEC, TGEC) and had weird formatting (i.e. FM1@DTSEC6, FM1@TGEC1). The legacy code is left unchanged in this respect. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
1c710187 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: separate receive buffer free code Move the receive buffer free code in a separate function. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
8313cb02 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: change init_phy() param Change the init_phy() parameter to simplify the code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
9b2e892e |
|
04-May-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: minor fix in DM ETH support Bus callback functions for read/write/reset need to be set only for DM_ETH, moving endif a bit lower. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f7ae49fc |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop log.h from common header Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e6f6f9e6 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop part.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
6eb32a03 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: add DM ETH support Probe the FMan MACs based on the device tree while retaining the legacy code/functionality. One notable change introduced here is that, for DM_ETH, the name of the interfaces is corrected to the fmX-macY format, that avoids the referral to the MAC block names which were incorrect for FMan v3 devices (i.e. DTSEC, TGEC) and had weird formatting (i.e. FM1@DTSEC6, FM1@TGEC1). The legacy code is left unchanged in this respect. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
1c710187 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: separate receive buffer free code Move the receive buffer free code in a separate function. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
8313cb02 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: change init_phy() param Change the init_phy() parameter to simplify the code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
9b2e892e |
|
04-May-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: minor fix in DM ETH support Bus callback functions for read/write/reset need to be set only for DM_ETH, moving endif a bit lower. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f7ae49fc |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop log.h from common header Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e6f6f9e6 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop part.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
6eb32a03 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: add DM ETH support Probe the FMan MACs based on the device tree while retaining the legacy code/functionality. One notable change introduced here is that, for DM_ETH, the name of the interfaces is corrected to the fmX-macY format, that avoids the referral to the MAC block names which were incorrect for FMan v3 devices (i.e. DTSEC, TGEC) and had weird formatting (i.e. FM1@DTSEC6, FM1@TGEC1). The legacy code is left unchanged in this respect. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
1c710187 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: separate receive buffer free code Move the receive buffer free code in a separate function. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
8313cb02 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: change init_phy() param Change the init_phy() parameter to simplify the code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
9b2e892e |
|
04-May-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: minor fix in DM ETH support Bus callback functions for read/write/reset need to be set only for DM_ETH, moving endif a bit lower. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f7ae49fc |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop log.h from common header Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e6f6f9e6 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop part.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
6eb32a03 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: add DM ETH support Probe the FMan MACs based on the device tree while retaining the legacy code/functionality. One notable change introduced here is that, for DM_ETH, the name of the interfaces is corrected to the fmX-macY format, that avoids the referral to the MAC block names which were incorrect for FMan v3 devices (i.e. DTSEC, TGEC) and had weird formatting (i.e. FM1@DTSEC6, FM1@TGEC1). The legacy code is left unchanged in this respect. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
1c710187 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: separate receive buffer free code Move the receive buffer free code in a separate function. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
8313cb02 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: change init_phy() param Change the init_phy() parameter to simplify the code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
9b2e892e |
|
04-May-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: minor fix in DM ETH support Bus callback functions for read/write/reset need to be set only for DM_ETH, moving endif a bit lower. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f7ae49fc |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop log.h from common header Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e6f6f9e6 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop part.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
6eb32a03 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: add DM ETH support Probe the FMan MACs based on the device tree while retaining the legacy code/functionality. One notable change introduced here is that, for DM_ETH, the name of the interfaces is corrected to the fmX-macY format, that avoids the referral to the MAC block names which were incorrect for FMan v3 devices (i.e. DTSEC, TGEC) and had weird formatting (i.e. FM1@DTSEC6, FM1@TGEC1). The legacy code is left unchanged in this respect. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
1c710187 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: separate receive buffer free code Move the receive buffer free code in a separate function. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
8313cb02 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: change init_phy() param Change the init_phy() parameter to simplify the code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
9b2e892e |
|
04-May-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: minor fix in DM ETH support Bus callback functions for read/write/reset need to be set only for DM_ETH, moving endif a bit lower. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f7ae49fc |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop log.h from common header Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e6f6f9e6 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop part.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
6eb32a03 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: add DM ETH support Probe the FMan MACs based on the device tree while retaining the legacy code/functionality. One notable change introduced here is that, for DM_ETH, the name of the interfaces is corrected to the fmX-macY format, that avoids the referral to the MAC block names which were incorrect for FMan v3 devices (i.e. DTSEC, TGEC) and had weird formatting (i.e. FM1@DTSEC6, FM1@TGEC1). The legacy code is left unchanged in this respect. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
1c710187 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: separate receive buffer free code Move the receive buffer free code in a separate function. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
8313cb02 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: change init_phy() param Change the init_phy() parameter to simplify the code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
9b2e892e |
|
04-May-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: minor fix in DM ETH support Bus callback functions for read/write/reset need to be set only for DM_ETH, moving endif a bit lower. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f7ae49fc |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop log.h from common header Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e6f6f9e6 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop part.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
6eb32a03 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: add DM ETH support Probe the FMan MACs based on the device tree while retaining the legacy code/functionality. One notable change introduced here is that, for DM_ETH, the name of the interfaces is corrected to the fmX-macY format, that avoids the referral to the MAC block names which were incorrect for FMan v3 devices (i.e. DTSEC, TGEC) and had weird formatting (i.e. FM1@DTSEC6, FM1@TGEC1). The legacy code is left unchanged in this respect. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
1c710187 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: separate receive buffer free code Move the receive buffer free code in a separate function. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
8313cb02 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: change init_phy() param Change the init_phy() parameter to simplify the code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
9b2e892e |
|
04-May-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: minor fix in DM ETH support Bus callback functions for read/write/reset need to be set only for DM_ETH, moving endif a bit lower. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f7ae49fc |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop log.h from common header Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e6f6f9e6 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop part.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
6eb32a03 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: add DM ETH support Probe the FMan MACs based on the device tree while retaining the legacy code/functionality. One notable change introduced here is that, for DM_ETH, the name of the interfaces is corrected to the fmX-macY format, that avoids the referral to the MAC block names which were incorrect for FMan v3 devices (i.e. DTSEC, TGEC) and had weird formatting (i.e. FM1@DTSEC6, FM1@TGEC1). The legacy code is left unchanged in this respect. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
1c710187 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: separate receive buffer free code Move the receive buffer free code in a separate function. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
8313cb02 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: change init_phy() param Change the init_phy() parameter to simplify the code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
9b2e892e |
|
04-May-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: minor fix in DM ETH support Bus callback functions for read/write/reset need to be set only for DM_ETH, moving endif a bit lower. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f7ae49fc |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop log.h from common header Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e6f6f9e6 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop part.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
6eb32a03 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: add DM ETH support Probe the FMan MACs based on the device tree while retaining the legacy code/functionality. One notable change introduced here is that, for DM_ETH, the name of the interfaces is corrected to the fmX-macY format, that avoids the referral to the MAC block names which were incorrect for FMan v3 devices (i.e. DTSEC, TGEC) and had weird formatting (i.e. FM1@DTSEC6, FM1@TGEC1). The legacy code is left unchanged in this respect. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
1c710187 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: separate receive buffer free code Move the receive buffer free code in a separate function. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
8313cb02 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: change init_phy() param Change the init_phy() parameter to simplify the code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
9b2e892e |
|
04-May-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: minor fix in DM ETH support Bus callback functions for read/write/reset need to be set only for DM_ETH, moving endif a bit lower. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f7ae49fc |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop log.h from common header Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e6f6f9e6 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop part.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
6eb32a03 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: add DM ETH support Probe the FMan MACs based on the device tree while retaining the legacy code/functionality. One notable change introduced here is that, for DM_ETH, the name of the interfaces is corrected to the fmX-macY format, that avoids the referral to the MAC block names which were incorrect for FMan v3 devices (i.e. DTSEC, TGEC) and had weird formatting (i.e. FM1@DTSEC6, FM1@TGEC1). The legacy code is left unchanged in this respect. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
1c710187 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: separate receive buffer free code Move the receive buffer free code in a separate function. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
8313cb02 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: change init_phy() param Change the init_phy() parameter to simplify the code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
9b2e892e |
|
04-May-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: minor fix in DM ETH support Bus callback functions for read/write/reset need to be set only for DM_ETH, moving endif a bit lower. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f7ae49fc |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop log.h from common header Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e6f6f9e6 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop part.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
6eb32a03 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: add DM ETH support Probe the FMan MACs based on the device tree while retaining the legacy code/functionality. One notable change introduced here is that, for DM_ETH, the name of the interfaces is corrected to the fmX-macY format, that avoids the referral to the MAC block names which were incorrect for FMan v3 devices (i.e. DTSEC, TGEC) and had weird formatting (i.e. FM1@DTSEC6, FM1@TGEC1). The legacy code is left unchanged in this respect. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
1c710187 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: separate receive buffer free code Move the receive buffer free code in a separate function. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
8313cb02 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: change init_phy() param Change the init_phy() parameter to simplify the code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
9b2e892e |
|
04-May-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: minor fix in DM ETH support Bus callback functions for read/write/reset need to be set only for DM_ETH, moving endif a bit lower. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f7ae49fc |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop log.h from common header Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e6f6f9e6 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop part.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
6eb32a03 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: add DM ETH support Probe the FMan MACs based on the device tree while retaining the legacy code/functionality. One notable change introduced here is that, for DM_ETH, the name of the interfaces is corrected to the fmX-macY format, that avoids the referral to the MAC block names which were incorrect for FMan v3 devices (i.e. DTSEC, TGEC) and had weird formatting (i.e. FM1@DTSEC6, FM1@TGEC1). The legacy code is left unchanged in this respect. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
1c710187 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: separate receive buffer free code Move the receive buffer free code in a separate function. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
8313cb02 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: change init_phy() param Change the init_phy() parameter to simplify the code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
9b2e892e |
|
04-May-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: minor fix in DM ETH support Bus callback functions for read/write/reset need to be set only for DM_ETH, moving endif a bit lower. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f7ae49fc |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop log.h from common header Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e6f6f9e6 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop part.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
6eb32a03 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: add DM ETH support Probe the FMan MACs based on the device tree while retaining the legacy code/functionality. One notable change introduced here is that, for DM_ETH, the name of the interfaces is corrected to the fmX-macY format, that avoids the referral to the MAC block names which were incorrect for FMan v3 devices (i.e. DTSEC, TGEC) and had weird formatting (i.e. FM1@DTSEC6, FM1@TGEC1). The legacy code is left unchanged in this respect. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
1c710187 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: separate receive buffer free code Move the receive buffer free code in a separate function. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
8313cb02 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: change init_phy() param Change the init_phy() parameter to simplify the code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
9b2e892e |
|
04-May-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: minor fix in DM ETH support Bus callback functions for read/write/reset need to be set only for DM_ETH, moving endif a bit lower. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f7ae49fc |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop log.h from common header Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e6f6f9e6 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop part.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
6eb32a03 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: add DM ETH support Probe the FMan MACs based on the device tree while retaining the legacy code/functionality. One notable change introduced here is that, for DM_ETH, the name of the interfaces is corrected to the fmX-macY format, that avoids the referral to the MAC block names which were incorrect for FMan v3 devices (i.e. DTSEC, TGEC) and had weird formatting (i.e. FM1@DTSEC6, FM1@TGEC1). The legacy code is left unchanged in this respect. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
1c710187 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: separate receive buffer free code Move the receive buffer free code in a separate function. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
8313cb02 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: change init_phy() param Change the init_phy() parameter to simplify the code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
9b2e892e |
|
04-May-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: minor fix in DM ETH support Bus callback functions for read/write/reset need to be set only for DM_ETH, moving endif a bit lower. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f7ae49fc |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop log.h from common header Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e6f6f9e6 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop part.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
6eb32a03 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: add DM ETH support Probe the FMan MACs based on the device tree while retaining the legacy code/functionality. One notable change introduced here is that, for DM_ETH, the name of the interfaces is corrected to the fmX-macY format, that avoids the referral to the MAC block names which were incorrect for FMan v3 devices (i.e. DTSEC, TGEC) and had weird formatting (i.e. FM1@DTSEC6, FM1@TGEC1). The legacy code is left unchanged in this respect. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
1c710187 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: separate receive buffer free code Move the receive buffer free code in a separate function. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
8313cb02 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: change init_phy() param Change the init_phy() parameter to simplify the code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
9b2e892e |
|
04-May-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: minor fix in DM ETH support Bus callback functions for read/write/reset need to be set only for DM_ETH, moving endif a bit lower. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f7ae49fc |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop log.h from common header Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e6f6f9e6 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop part.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
6eb32a03 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: add DM ETH support Probe the FMan MACs based on the device tree while retaining the legacy code/functionality. One notable change introduced here is that, for DM_ETH, the name of the interfaces is corrected to the fmX-macY format, that avoids the referral to the MAC block names which were incorrect for FMan v3 devices (i.e. DTSEC, TGEC) and had weird formatting (i.e. FM1@DTSEC6, FM1@TGEC1). The legacy code is left unchanged in this respect. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
1c710187 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: separate receive buffer free code Move the receive buffer free code in a separate function. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
8313cb02 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: change init_phy() param Change the init_phy() parameter to simplify the code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
9b2e892e |
|
04-May-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: minor fix in DM ETH support Bus callback functions for read/write/reset need to be set only for DM_ETH, moving endif a bit lower. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f7ae49fc |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop log.h from common header Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e6f6f9e6 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop part.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
6eb32a03 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: add DM ETH support Probe the FMan MACs based on the device tree while retaining the legacy code/functionality. One notable change introduced here is that, for DM_ETH, the name of the interfaces is corrected to the fmX-macY format, that avoids the referral to the MAC block names which were incorrect for FMan v3 devices (i.e. DTSEC, TGEC) and had weird formatting (i.e. FM1@DTSEC6, FM1@TGEC1). The legacy code is left unchanged in this respect. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
1c710187 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: separate receive buffer free code Move the receive buffer free code in a separate function. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
8313cb02 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: change init_phy() param Change the init_phy() parameter to simplify the code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
9b2e892e |
|
04-May-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: minor fix in DM ETH support Bus callback functions for read/write/reset need to be set only for DM_ETH, moving endif a bit lower. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f7ae49fc |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop log.h from common header Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e6f6f9e6 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop part.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
6eb32a03 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: add DM ETH support Probe the FMan MACs based on the device tree while retaining the legacy code/functionality. One notable change introduced here is that, for DM_ETH, the name of the interfaces is corrected to the fmX-macY format, that avoids the referral to the MAC block names which were incorrect for FMan v3 devices (i.e. DTSEC, TGEC) and had weird formatting (i.e. FM1@DTSEC6, FM1@TGEC1). The legacy code is left unchanged in this respect. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
1c710187 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: separate receive buffer free code Move the receive buffer free code in a separate function. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
8313cb02 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: change init_phy() param Change the init_phy() parameter to simplify the code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
9b2e892e |
|
04-May-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: minor fix in DM ETH support Bus callback functions for read/write/reset need to be set only for DM_ETH, moving endif a bit lower. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f7ae49fc |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop log.h from common header Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e6f6f9e6 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop part.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
6eb32a03 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: add DM ETH support Probe the FMan MACs based on the device tree while retaining the legacy code/functionality. One notable change introduced here is that, for DM_ETH, the name of the interfaces is corrected to the fmX-macY format, that avoids the referral to the MAC block names which were incorrect for FMan v3 devices (i.e. DTSEC, TGEC) and had weird formatting (i.e. FM1@DTSEC6, FM1@TGEC1). The legacy code is left unchanged in this respect. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
1c710187 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: separate receive buffer free code Move the receive buffer free code in a separate function. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
8313cb02 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: change init_phy() param Change the init_phy() parameter to simplify the code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
9b2e892e |
|
04-May-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: minor fix in DM ETH support Bus callback functions for read/write/reset need to be set only for DM_ETH, moving endif a bit lower. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f7ae49fc |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop log.h from common header Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e6f6f9e6 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop part.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
6eb32a03 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: add DM ETH support Probe the FMan MACs based on the device tree while retaining the legacy code/functionality. One notable change introduced here is that, for DM_ETH, the name of the interfaces is corrected to the fmX-macY format, that avoids the referral to the MAC block names which were incorrect for FMan v3 devices (i.e. DTSEC, TGEC) and had weird formatting (i.e. FM1@DTSEC6, FM1@TGEC1). The legacy code is left unchanged in this respect. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
1c710187 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: separate receive buffer free code Move the receive buffer free code in a separate function. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
8313cb02 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: change init_phy() param Change the init_phy() parameter to simplify the code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
9b2e892e |
|
04-May-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: minor fix in DM ETH support Bus callback functions for read/write/reset need to be set only for DM_ETH, moving endif a bit lower. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f7ae49fc |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop log.h from common header Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e6f6f9e6 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop part.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
6eb32a03 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: add DM ETH support Probe the FMan MACs based on the device tree while retaining the legacy code/functionality. One notable change introduced here is that, for DM_ETH, the name of the interfaces is corrected to the fmX-macY format, that avoids the referral to the MAC block names which were incorrect for FMan v3 devices (i.e. DTSEC, TGEC) and had weird formatting (i.e. FM1@DTSEC6, FM1@TGEC1). The legacy code is left unchanged in this respect. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
1c710187 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: separate receive buffer free code Move the receive buffer free code in a separate function. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
8313cb02 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: change init_phy() param Change the init_phy() parameter to simplify the code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
9b2e892e |
|
04-May-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: minor fix in DM ETH support Bus callback functions for read/write/reset need to be set only for DM_ETH, moving endif a bit lower. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f7ae49fc |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop log.h from common header Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e6f6f9e6 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop part.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
6eb32a03 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: add DM ETH support Probe the FMan MACs based on the device tree while retaining the legacy code/functionality. One notable change introduced here is that, for DM_ETH, the name of the interfaces is corrected to the fmX-macY format, that avoids the referral to the MAC block names which were incorrect for FMan v3 devices (i.e. DTSEC, TGEC) and had weird formatting (i.e. FM1@DTSEC6, FM1@TGEC1). The legacy code is left unchanged in this respect. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
1c710187 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: separate receive buffer free code Move the receive buffer free code in a separate function. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
8313cb02 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: change init_phy() param Change the init_phy() parameter to simplify the code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
9b2e892e |
|
04-May-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: minor fix in DM ETH support Bus callback functions for read/write/reset need to be set only for DM_ETH, moving endif a bit lower. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f7ae49fc |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop log.h from common header Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e6f6f9e6 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop part.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
6eb32a03 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: add DM ETH support Probe the FMan MACs based on the device tree while retaining the legacy code/functionality. One notable change introduced here is that, for DM_ETH, the name of the interfaces is corrected to the fmX-macY format, that avoids the referral to the MAC block names which were incorrect for FMan v3 devices (i.e. DTSEC, TGEC) and had weird formatting (i.e. FM1@DTSEC6, FM1@TGEC1). The legacy code is left unchanged in this respect. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
1c710187 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: separate receive buffer free code Move the receive buffer free code in a separate function. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
8313cb02 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: change init_phy() param Change the init_phy() parameter to simplify the code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
9b2e892e |
|
04-May-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: minor fix in DM ETH support Bus callback functions for read/write/reset need to be set only for DM_ETH, moving endif a bit lower. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f7ae49fc |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop log.h from common header Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e6f6f9e6 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop part.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
6eb32a03 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: add DM ETH support Probe the FMan MACs based on the device tree while retaining the legacy code/functionality. One notable change introduced here is that, for DM_ETH, the name of the interfaces is corrected to the fmX-macY format, that avoids the referral to the MAC block names which were incorrect for FMan v3 devices (i.e. DTSEC, TGEC) and had weird formatting (i.e. FM1@DTSEC6, FM1@TGEC1). The legacy code is left unchanged in this respect. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
1c710187 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: separate receive buffer free code Move the receive buffer free code in a separate function. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
8313cb02 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: change init_phy() param Change the init_phy() parameter to simplify the code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
9b2e892e |
|
04-May-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: minor fix in DM ETH support Bus callback functions for read/write/reset need to be set only for DM_ETH, moving endif a bit lower. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f7ae49fc |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop log.h from common header Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e6f6f9e6 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop part.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
6eb32a03 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: add DM ETH support Probe the FMan MACs based on the device tree while retaining the legacy code/functionality. One notable change introduced here is that, for DM_ETH, the name of the interfaces is corrected to the fmX-macY format, that avoids the referral to the MAC block names which were incorrect for FMan v3 devices (i.e. DTSEC, TGEC) and had weird formatting (i.e. FM1@DTSEC6, FM1@TGEC1). The legacy code is left unchanged in this respect. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
1c710187 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: separate receive buffer free code Move the receive buffer free code in a separate function. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
8313cb02 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: change init_phy() param Change the init_phy() parameter to simplify the code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
9b2e892e |
|
04-May-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: minor fix in DM ETH support Bus callback functions for read/write/reset need to be set only for DM_ETH, moving endif a bit lower. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f7ae49fc |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop log.h from common header Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e6f6f9e6 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop part.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
6eb32a03 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: add DM ETH support Probe the FMan MACs based on the device tree while retaining the legacy code/functionality. One notable change introduced here is that, for DM_ETH, the name of the interfaces is corrected to the fmX-macY format, that avoids the referral to the MAC block names which were incorrect for FMan v3 devices (i.e. DTSEC, TGEC) and had weird formatting (i.e. FM1@DTSEC6, FM1@TGEC1). The legacy code is left unchanged in this respect. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
1c710187 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: separate receive buffer free code Move the receive buffer free code in a separate function. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
8313cb02 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: change init_phy() param Change the init_phy() parameter to simplify the code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
9b2e892e |
|
04-May-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: minor fix in DM ETH support Bus callback functions for read/write/reset need to be set only for DM_ETH, moving endif a bit lower. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f7ae49fc |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop log.h from common header Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e6f6f9e6 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop part.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
6eb32a03 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: add DM ETH support Probe the FMan MACs based on the device tree while retaining the legacy code/functionality. One notable change introduced here is that, for DM_ETH, the name of the interfaces is corrected to the fmX-macY format, that avoids the referral to the MAC block names which were incorrect for FMan v3 devices (i.e. DTSEC, TGEC) and had weird formatting (i.e. FM1@DTSEC6, FM1@TGEC1). The legacy code is left unchanged in this respect. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
1c710187 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: separate receive buffer free code Move the receive buffer free code in a separate function. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
8313cb02 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: change init_phy() param Change the init_phy() parameter to simplify the code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
9b2e892e |
|
04-May-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: minor fix in DM ETH support Bus callback functions for read/write/reset need to be set only for DM_ETH, moving endif a bit lower. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f7ae49fc |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop log.h from common header Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e6f6f9e6 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop part.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
6eb32a03 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: add DM ETH support Probe the FMan MACs based on the device tree while retaining the legacy code/functionality. One notable change introduced here is that, for DM_ETH, the name of the interfaces is corrected to the fmX-macY format, that avoids the referral to the MAC block names which were incorrect for FMan v3 devices (i.e. DTSEC, TGEC) and had weird formatting (i.e. FM1@DTSEC6, FM1@TGEC1). The legacy code is left unchanged in this respect. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
1c710187 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: separate receive buffer free code Move the receive buffer free code in a separate function. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
8313cb02 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: change init_phy() param Change the init_phy() parameter to simplify the code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
9b2e892e |
|
04-May-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: minor fix in DM ETH support Bus callback functions for read/write/reset need to be set only for DM_ETH, moving endif a bit lower. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f7ae49fc |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop log.h from common header Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e6f6f9e6 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop part.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
6eb32a03 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: add DM ETH support Probe the FMan MACs based on the device tree while retaining the legacy code/functionality. One notable change introduced here is that, for DM_ETH, the name of the interfaces is corrected to the fmX-macY format, that avoids the referral to the MAC block names which were incorrect for FMan v3 devices (i.e. DTSEC, TGEC) and had weird formatting (i.e. FM1@DTSEC6, FM1@TGEC1). The legacy code is left unchanged in this respect. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
1c710187 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: separate receive buffer free code Move the receive buffer free code in a separate function. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
8313cb02 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: change init_phy() param Change the init_phy() parameter to simplify the code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
9b2e892e |
|
04-May-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: minor fix in DM ETH support Bus callback functions for read/write/reset need to be set only for DM_ETH, moving endif a bit lower. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f7ae49fc |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop log.h from common header Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e6f6f9e6 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop part.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
6eb32a03 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: add DM ETH support Probe the FMan MACs based on the device tree while retaining the legacy code/functionality. One notable change introduced here is that, for DM_ETH, the name of the interfaces is corrected to the fmX-macY format, that avoids the referral to the MAC block names which were incorrect for FMan v3 devices (i.e. DTSEC, TGEC) and had weird formatting (i.e. FM1@DTSEC6, FM1@TGEC1). The legacy code is left unchanged in this respect. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
1c710187 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: separate receive buffer free code Move the receive buffer free code in a separate function. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
8313cb02 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: change init_phy() param Change the init_phy() parameter to simplify the code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
9b2e892e |
|
04-May-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: minor fix in DM ETH support Bus callback functions for read/write/reset need to be set only for DM_ETH, moving endif a bit lower. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f7ae49fc |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop log.h from common header Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e6f6f9e6 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop part.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
6eb32a03 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: add DM ETH support Probe the FMan MACs based on the device tree while retaining the legacy code/functionality. One notable change introduced here is that, for DM_ETH, the name of the interfaces is corrected to the fmX-macY format, that avoids the referral to the MAC block names which were incorrect for FMan v3 devices (i.e. DTSEC, TGEC) and had weird formatting (i.e. FM1@DTSEC6, FM1@TGEC1). The legacy code is left unchanged in this respect. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
1c710187 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: separate receive buffer free code Move the receive buffer free code in a separate function. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
8313cb02 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: change init_phy() param Change the init_phy() parameter to simplify the code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
9b2e892e |
|
04-May-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: minor fix in DM ETH support Bus callback functions for read/write/reset need to be set only for DM_ETH, moving endif a bit lower. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f7ae49fc |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop log.h from common header Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e6f6f9e6 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop part.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
6eb32a03 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: add DM ETH support Probe the FMan MACs based on the device tree while retaining the legacy code/functionality. One notable change introduced here is that, for DM_ETH, the name of the interfaces is corrected to the fmX-macY format, that avoids the referral to the MAC block names which were incorrect for FMan v3 devices (i.e. DTSEC, TGEC) and had weird formatting (i.e. FM1@DTSEC6, FM1@TGEC1). The legacy code is left unchanged in this respect. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
1c710187 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: separate receive buffer free code Move the receive buffer free code in a separate function. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
8313cb02 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: change init_phy() param Change the init_phy() parameter to simplify the code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
9b2e892e |
|
04-May-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: minor fix in DM ETH support Bus callback functions for read/write/reset need to be set only for DM_ETH, moving endif a bit lower. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f7ae49fc |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop log.h from common header Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e6f6f9e6 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop part.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
6eb32a03 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: add DM ETH support Probe the FMan MACs based on the device tree while retaining the legacy code/functionality. One notable change introduced here is that, for DM_ETH, the name of the interfaces is corrected to the fmX-macY format, that avoids the referral to the MAC block names which were incorrect for FMan v3 devices (i.e. DTSEC, TGEC) and had weird formatting (i.e. FM1@DTSEC6, FM1@TGEC1). The legacy code is left unchanged in this respect. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
1c710187 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: separate receive buffer free code Move the receive buffer free code in a separate function. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
8313cb02 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: change init_phy() param Change the init_phy() parameter to simplify the code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
9b2e892e |
|
04-May-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: minor fix in DM ETH support Bus callback functions for read/write/reset need to be set only for DM_ETH, moving endif a bit lower. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f7ae49fc |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop log.h from common header Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e6f6f9e6 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop part.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
6eb32a03 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: add DM ETH support Probe the FMan MACs based on the device tree while retaining the legacy code/functionality. One notable change introduced here is that, for DM_ETH, the name of the interfaces is corrected to the fmX-macY format, that avoids the referral to the MAC block names which were incorrect for FMan v3 devices (i.e. DTSEC, TGEC) and had weird formatting (i.e. FM1@DTSEC6, FM1@TGEC1). The legacy code is left unchanged in this respect. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
1c710187 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: separate receive buffer free code Move the receive buffer free code in a separate function. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
8313cb02 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: change init_phy() param Change the init_phy() parameter to simplify the code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
9b2e892e |
|
04-May-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: minor fix in DM ETH support Bus callback functions for read/write/reset need to be set only for DM_ETH, moving endif a bit lower. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f7ae49fc |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop log.h from common header Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e6f6f9e6 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop part.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
6eb32a03 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: add DM ETH support Probe the FMan MACs based on the device tree while retaining the legacy code/functionality. One notable change introduced here is that, for DM_ETH, the name of the interfaces is corrected to the fmX-macY format, that avoids the referral to the MAC block names which were incorrect for FMan v3 devices (i.e. DTSEC, TGEC) and had weird formatting (i.e. FM1@DTSEC6, FM1@TGEC1). The legacy code is left unchanged in this respect. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
1c710187 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: separate receive buffer free code Move the receive buffer free code in a separate function. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
8313cb02 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: change init_phy() param Change the init_phy() parameter to simplify the code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
9b2e892e |
|
04-May-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: minor fix in DM ETH support Bus callback functions for read/write/reset need to be set only for DM_ETH, moving endif a bit lower. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f7ae49fc |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop log.h from common header Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e6f6f9e6 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop part.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
6eb32a03 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: add DM ETH support Probe the FMan MACs based on the device tree while retaining the legacy code/functionality. One notable change introduced here is that, for DM_ETH, the name of the interfaces is corrected to the fmX-macY format, that avoids the referral to the MAC block names which were incorrect for FMan v3 devices (i.e. DTSEC, TGEC) and had weird formatting (i.e. FM1@DTSEC6, FM1@TGEC1). The legacy code is left unchanged in this respect. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
1c710187 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: separate receive buffer free code Move the receive buffer free code in a separate function. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
8313cb02 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: change init_phy() param Change the init_phy() parameter to simplify the code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
9b2e892e |
|
04-May-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: minor fix in DM ETH support Bus callback functions for read/write/reset need to be set only for DM_ETH, moving endif a bit lower. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f7ae49fc |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop log.h from common header Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e6f6f9e6 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop part.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
6eb32a03 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: add DM ETH support Probe the FMan MACs based on the device tree while retaining the legacy code/functionality. One notable change introduced here is that, for DM_ETH, the name of the interfaces is corrected to the fmX-macY format, that avoids the referral to the MAC block names which were incorrect for FMan v3 devices (i.e. DTSEC, TGEC) and had weird formatting (i.e. FM1@DTSEC6, FM1@TGEC1). The legacy code is left unchanged in this respect. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
1c710187 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: separate receive buffer free code Move the receive buffer free code in a separate function. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
8313cb02 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: change init_phy() param Change the init_phy() parameter to simplify the code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
9b2e892e |
|
04-May-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: minor fix in DM ETH support Bus callback functions for read/write/reset need to be set only for DM_ETH, moving endif a bit lower. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f7ae49fc |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop log.h from common header Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e6f6f9e6 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop part.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
6eb32a03 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: add DM ETH support Probe the FMan MACs based on the device tree while retaining the legacy code/functionality. One notable change introduced here is that, for DM_ETH, the name of the interfaces is corrected to the fmX-macY format, that avoids the referral to the MAC block names which were incorrect for FMan v3 devices (i.e. DTSEC, TGEC) and had weird formatting (i.e. FM1@DTSEC6, FM1@TGEC1). The legacy code is left unchanged in this respect. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
1c710187 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: separate receive buffer free code Move the receive buffer free code in a separate function. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
8313cb02 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: change init_phy() param Change the init_phy() parameter to simplify the code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
9b2e892e |
|
04-May-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: minor fix in DM ETH support Bus callback functions for read/write/reset need to be set only for DM_ETH, moving endif a bit lower. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f7ae49fc |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop log.h from common header Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e6f6f9e6 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop part.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
6eb32a03 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: add DM ETH support Probe the FMan MACs based on the device tree while retaining the legacy code/functionality. One notable change introduced here is that, for DM_ETH, the name of the interfaces is corrected to the fmX-macY format, that avoids the referral to the MAC block names which were incorrect for FMan v3 devices (i.e. DTSEC, TGEC) and had weird formatting (i.e. FM1@DTSEC6, FM1@TGEC1). The legacy code is left unchanged in this respect. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
1c710187 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: separate receive buffer free code Move the receive buffer free code in a separate function. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
8313cb02 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: change init_phy() param Change the init_phy() parameter to simplify the code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
9b2e892e |
|
04-May-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: minor fix in DM ETH support Bus callback functions for read/write/reset need to be set only for DM_ETH, moving endif a bit lower. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f7ae49fc |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop log.h from common header Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e6f6f9e6 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop part.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
6eb32a03 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: add DM ETH support Probe the FMan MACs based on the device tree while retaining the legacy code/functionality. One notable change introduced here is that, for DM_ETH, the name of the interfaces is corrected to the fmX-macY format, that avoids the referral to the MAC block names which were incorrect for FMan v3 devices (i.e. DTSEC, TGEC) and had weird formatting (i.e. FM1@DTSEC6, FM1@TGEC1). The legacy code is left unchanged in this respect. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
1c710187 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: separate receive buffer free code Move the receive buffer free code in a separate function. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
8313cb02 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: change init_phy() param Change the init_phy() parameter to simplify the code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
9b2e892e |
|
04-May-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: minor fix in DM ETH support Bus callback functions for read/write/reset need to be set only for DM_ETH, moving endif a bit lower. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f7ae49fc |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop log.h from common header Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e6f6f9e6 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop part.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
6eb32a03 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: add DM ETH support Probe the FMan MACs based on the device tree while retaining the legacy code/functionality. One notable change introduced here is that, for DM_ETH, the name of the interfaces is corrected to the fmX-macY format, that avoids the referral to the MAC block names which were incorrect for FMan v3 devices (i.e. DTSEC, TGEC) and had weird formatting (i.e. FM1@DTSEC6, FM1@TGEC1). The legacy code is left unchanged in this respect. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
1c710187 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: separate receive buffer free code Move the receive buffer free code in a separate function. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
8313cb02 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: change init_phy() param Change the init_phy() parameter to simplify the code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
9b2e892e |
|
04-May-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: minor fix in DM ETH support Bus callback functions for read/write/reset need to be set only for DM_ETH, moving endif a bit lower. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f7ae49fc |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop log.h from common header Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e6f6f9e6 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop part.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
6eb32a03 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: add DM ETH support Probe the FMan MACs based on the device tree while retaining the legacy code/functionality. One notable change introduced here is that, for DM_ETH, the name of the interfaces is corrected to the fmX-macY format, that avoids the referral to the MAC block names which were incorrect for FMan v3 devices (i.e. DTSEC, TGEC) and had weird formatting (i.e. FM1@DTSEC6, FM1@TGEC1). The legacy code is left unchanged in this respect. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
1c710187 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: separate receive buffer free code Move the receive buffer free code in a separate function. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
8313cb02 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: change init_phy() param Change the init_phy() parameter to simplify the code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
9b2e892e |
|
04-May-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: minor fix in DM ETH support Bus callback functions for read/write/reset need to be set only for DM_ETH, moving endif a bit lower. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f7ae49fc |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop log.h from common header Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e6f6f9e6 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop part.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
6eb32a03 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: add DM ETH support Probe the FMan MACs based on the device tree while retaining the legacy code/functionality. One notable change introduced here is that, for DM_ETH, the name of the interfaces is corrected to the fmX-macY format, that avoids the referral to the MAC block names which were incorrect for FMan v3 devices (i.e. DTSEC, TGEC) and had weird formatting (i.e. FM1@DTSEC6, FM1@TGEC1). The legacy code is left unchanged in this respect. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
1c710187 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: separate receive buffer free code Move the receive buffer free code in a separate function. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
8313cb02 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: change init_phy() param Change the init_phy() parameter to simplify the code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
9b2e892e |
|
04-May-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: minor fix in DM ETH support Bus callback functions for read/write/reset need to be set only for DM_ETH, moving endif a bit lower. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f7ae49fc |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop log.h from common header Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e6f6f9e6 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop part.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
6eb32a03 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: add DM ETH support Probe the FMan MACs based on the device tree while retaining the legacy code/functionality. One notable change introduced here is that, for DM_ETH, the name of the interfaces is corrected to the fmX-macY format, that avoids the referral to the MAC block names which were incorrect for FMan v3 devices (i.e. DTSEC, TGEC) and had weird formatting (i.e. FM1@DTSEC6, FM1@TGEC1). The legacy code is left unchanged in this respect. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
1c710187 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: separate receive buffer free code Move the receive buffer free code in a separate function. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
8313cb02 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: change init_phy() param Change the init_phy() parameter to simplify the code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
9b2e892e |
|
04-May-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: minor fix in DM ETH support Bus callback functions for read/write/reset need to be set only for DM_ETH, moving endif a bit lower. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f7ae49fc |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop log.h from common header Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e6f6f9e6 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop part.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
6eb32a03 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: add DM ETH support Probe the FMan MACs based on the device tree while retaining the legacy code/functionality. One notable change introduced here is that, for DM_ETH, the name of the interfaces is corrected to the fmX-macY format, that avoids the referral to the MAC block names which were incorrect for FMan v3 devices (i.e. DTSEC, TGEC) and had weird formatting (i.e. FM1@DTSEC6, FM1@TGEC1). The legacy code is left unchanged in this respect. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
1c710187 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: separate receive buffer free code Move the receive buffer free code in a separate function. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
8313cb02 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: change init_phy() param Change the init_phy() parameter to simplify the code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
9b2e892e |
|
04-May-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: minor fix in DM ETH support Bus callback functions for read/write/reset need to be set only for DM_ETH, moving endif a bit lower. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f7ae49fc |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop log.h from common header Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e6f6f9e6 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop part.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
6eb32a03 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: add DM ETH support Probe the FMan MACs based on the device tree while retaining the legacy code/functionality. One notable change introduced here is that, for DM_ETH, the name of the interfaces is corrected to the fmX-macY format, that avoids the referral to the MAC block names which were incorrect for FMan v3 devices (i.e. DTSEC, TGEC) and had weird formatting (i.e. FM1@DTSEC6, FM1@TGEC1). The legacy code is left unchanged in this respect. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
1c710187 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: separate receive buffer free code Move the receive buffer free code in a separate function. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
8313cb02 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: change init_phy() param Change the init_phy() parameter to simplify the code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
9b2e892e |
|
04-May-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: minor fix in DM ETH support Bus callback functions for read/write/reset need to be set only for DM_ETH, moving endif a bit lower. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f7ae49fc |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop log.h from common header Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e6f6f9e6 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop part.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
6eb32a03 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: add DM ETH support Probe the FMan MACs based on the device tree while retaining the legacy code/functionality. One notable change introduced here is that, for DM_ETH, the name of the interfaces is corrected to the fmX-macY format, that avoids the referral to the MAC block names which were incorrect for FMan v3 devices (i.e. DTSEC, TGEC) and had weird formatting (i.e. FM1@DTSEC6, FM1@TGEC1). The legacy code is left unchanged in this respect. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
1c710187 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: separate receive buffer free code Move the receive buffer free code in a separate function. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
8313cb02 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: change init_phy() param Change the init_phy() parameter to simplify the code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
9b2e892e |
|
04-May-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: minor fix in DM ETH support Bus callback functions for read/write/reset need to be set only for DM_ETH, moving endif a bit lower. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f7ae49fc |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop log.h from common header Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e6f6f9e6 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop part.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
6eb32a03 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: add DM ETH support Probe the FMan MACs based on the device tree while retaining the legacy code/functionality. One notable change introduced here is that, for DM_ETH, the name of the interfaces is corrected to the fmX-macY format, that avoids the referral to the MAC block names which were incorrect for FMan v3 devices (i.e. DTSEC, TGEC) and had weird formatting (i.e. FM1@DTSEC6, FM1@TGEC1). The legacy code is left unchanged in this respect. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
1c710187 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: separate receive buffer free code Move the receive buffer free code in a separate function. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
8313cb02 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: change init_phy() param Change the init_phy() parameter to simplify the code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
9b2e892e |
|
04-May-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: minor fix in DM ETH support Bus callback functions for read/write/reset need to be set only for DM_ETH, moving endif a bit lower. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f7ae49fc |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop log.h from common header Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e6f6f9e6 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop part.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
6eb32a03 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: add DM ETH support Probe the FMan MACs based on the device tree while retaining the legacy code/functionality. One notable change introduced here is that, for DM_ETH, the name of the interfaces is corrected to the fmX-macY format, that avoids the referral to the MAC block names which were incorrect for FMan v3 devices (i.e. DTSEC, TGEC) and had weird formatting (i.e. FM1@DTSEC6, FM1@TGEC1). The legacy code is left unchanged in this respect. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
1c710187 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: separate receive buffer free code Move the receive buffer free code in a separate function. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
8313cb02 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: change init_phy() param Change the init_phy() parameter to simplify the code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
9b2e892e |
|
04-May-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: minor fix in DM ETH support Bus callback functions for read/write/reset need to be set only for DM_ETH, moving endif a bit lower. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f7ae49fc |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop log.h from common header Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e6f6f9e6 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop part.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
6eb32a03 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: add DM ETH support Probe the FMan MACs based on the device tree while retaining the legacy code/functionality. One notable change introduced here is that, for DM_ETH, the name of the interfaces is corrected to the fmX-macY format, that avoids the referral to the MAC block names which were incorrect for FMan v3 devices (i.e. DTSEC, TGEC) and had weird formatting (i.e. FM1@DTSEC6, FM1@TGEC1). The legacy code is left unchanged in this respect. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
1c710187 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: separate receive buffer free code Move the receive buffer free code in a separate function. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
8313cb02 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: change init_phy() param Change the init_phy() parameter to simplify the code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
9b2e892e |
|
04-May-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: minor fix in DM ETH support Bus callback functions for read/write/reset need to be set only for DM_ETH, moving endif a bit lower. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f7ae49fc |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop log.h from common header Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e6f6f9e6 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop part.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
6eb32a03 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: add DM ETH support Probe the FMan MACs based on the device tree while retaining the legacy code/functionality. One notable change introduced here is that, for DM_ETH, the name of the interfaces is corrected to the fmX-macY format, that avoids the referral to the MAC block names which were incorrect for FMan v3 devices (i.e. DTSEC, TGEC) and had weird formatting (i.e. FM1@DTSEC6, FM1@TGEC1). The legacy code is left unchanged in this respect. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
1c710187 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: separate receive buffer free code Move the receive buffer free code in a separate function. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
8313cb02 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: change init_phy() param Change the init_phy() parameter to simplify the code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
9b2e892e |
|
04-May-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: minor fix in DM ETH support Bus callback functions for read/write/reset need to be set only for DM_ETH, moving endif a bit lower. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f7ae49fc |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop log.h from common header Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e6f6f9e6 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop part.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
6eb32a03 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: add DM ETH support Probe the FMan MACs based on the device tree while retaining the legacy code/functionality. One notable change introduced here is that, for DM_ETH, the name of the interfaces is corrected to the fmX-macY format, that avoids the referral to the MAC block names which were incorrect for FMan v3 devices (i.e. DTSEC, TGEC) and had weird formatting (i.e. FM1@DTSEC6, FM1@TGEC1). The legacy code is left unchanged in this respect. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
1c710187 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: separate receive buffer free code Move the receive buffer free code in a separate function. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
8313cb02 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: change init_phy() param Change the init_phy() parameter to simplify the code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
9b2e892e |
|
04-May-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: minor fix in DM ETH support Bus callback functions for read/write/reset need to be set only for DM_ETH, moving endif a bit lower. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f7ae49fc |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop log.h from common header Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e6f6f9e6 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop part.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
6eb32a03 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: add DM ETH support Probe the FMan MACs based on the device tree while retaining the legacy code/functionality. One notable change introduced here is that, for DM_ETH, the name of the interfaces is corrected to the fmX-macY format, that avoids the referral to the MAC block names which were incorrect for FMan v3 devices (i.e. DTSEC, TGEC) and had weird formatting (i.e. FM1@DTSEC6, FM1@TGEC1). The legacy code is left unchanged in this respect. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
1c710187 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: separate receive buffer free code Move the receive buffer free code in a separate function. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
8313cb02 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: change init_phy() param Change the init_phy() parameter to simplify the code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
9b2e892e |
|
04-May-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: minor fix in DM ETH support Bus callback functions for read/write/reset need to be set only for DM_ETH, moving endif a bit lower. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f7ae49fc |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop log.h from common header Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e6f6f9e6 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop part.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
6eb32a03 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: add DM ETH support Probe the FMan MACs based on the device tree while retaining the legacy code/functionality. One notable change introduced here is that, for DM_ETH, the name of the interfaces is corrected to the fmX-macY format, that avoids the referral to the MAC block names which were incorrect for FMan v3 devices (i.e. DTSEC, TGEC) and had weird formatting (i.e. FM1@DTSEC6, FM1@TGEC1). The legacy code is left unchanged in this respect. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
1c710187 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: separate receive buffer free code Move the receive buffer free code in a separate function. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
8313cb02 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: change init_phy() param Change the init_phy() parameter to simplify the code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
9b2e892e |
|
04-May-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: minor fix in DM ETH support Bus callback functions for read/write/reset need to be set only for DM_ETH, moving endif a bit lower. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f7ae49fc |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop log.h from common header Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e6f6f9e6 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop part.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
6eb32a03 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: add DM ETH support Probe the FMan MACs based on the device tree while retaining the legacy code/functionality. One notable change introduced here is that, for DM_ETH, the name of the interfaces is corrected to the fmX-macY format, that avoids the referral to the MAC block names which were incorrect for FMan v3 devices (i.e. DTSEC, TGEC) and had weird formatting (i.e. FM1@DTSEC6, FM1@TGEC1). The legacy code is left unchanged in this respect. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
1c710187 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: separate receive buffer free code Move the receive buffer free code in a separate function. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
8313cb02 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: change init_phy() param Change the init_phy() parameter to simplify the code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
9b2e892e |
|
04-May-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: minor fix in DM ETH support Bus callback functions for read/write/reset need to be set only for DM_ETH, moving endif a bit lower. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f7ae49fc |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop log.h from common header Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e6f6f9e6 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop part.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
6eb32a03 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: add DM ETH support Probe the FMan MACs based on the device tree while retaining the legacy code/functionality. One notable change introduced here is that, for DM_ETH, the name of the interfaces is corrected to the fmX-macY format, that avoids the referral to the MAC block names which were incorrect for FMan v3 devices (i.e. DTSEC, TGEC) and had weird formatting (i.e. FM1@DTSEC6, FM1@TGEC1). The legacy code is left unchanged in this respect. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
1c710187 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: separate receive buffer free code Move the receive buffer free code in a separate function. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
8313cb02 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: change init_phy() param Change the init_phy() parameter to simplify the code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
9b2e892e |
|
04-May-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: minor fix in DM ETH support Bus callback functions for read/write/reset need to be set only for DM_ETH, moving endif a bit lower. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f7ae49fc |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop log.h from common header Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e6f6f9e6 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop part.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
6eb32a03 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: add DM ETH support Probe the FMan MACs based on the device tree while retaining the legacy code/functionality. One notable change introduced here is that, for DM_ETH, the name of the interfaces is corrected to the fmX-macY format, that avoids the referral to the MAC block names which were incorrect for FMan v3 devices (i.e. DTSEC, TGEC) and had weird formatting (i.e. FM1@DTSEC6, FM1@TGEC1). The legacy code is left unchanged in this respect. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
1c710187 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: separate receive buffer free code Move the receive buffer free code in a separate function. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
8313cb02 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: change init_phy() param Change the init_phy() parameter to simplify the code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
9b2e892e |
|
04-May-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: minor fix in DM ETH support Bus callback functions for read/write/reset need to be set only for DM_ETH, moving endif a bit lower. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f7ae49fc |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop log.h from common header Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e6f6f9e6 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop part.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
6eb32a03 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: add DM ETH support Probe the FMan MACs based on the device tree while retaining the legacy code/functionality. One notable change introduced here is that, for DM_ETH, the name of the interfaces is corrected to the fmX-macY format, that avoids the referral to the MAC block names which were incorrect for FMan v3 devices (i.e. DTSEC, TGEC) and had weird formatting (i.e. FM1@DTSEC6, FM1@TGEC1). The legacy code is left unchanged in this respect. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
1c710187 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: separate receive buffer free code Move the receive buffer free code in a separate function. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
8313cb02 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: change init_phy() param Change the init_phy() parameter to simplify the code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
9b2e892e |
|
04-May-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: minor fix in DM ETH support Bus callback functions for read/write/reset need to be set only for DM_ETH, moving endif a bit lower. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f7ae49fc |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop log.h from common header Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e6f6f9e6 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop part.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
6eb32a03 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: add DM ETH support Probe the FMan MACs based on the device tree while retaining the legacy code/functionality. One notable change introduced here is that, for DM_ETH, the name of the interfaces is corrected to the fmX-macY format, that avoids the referral to the MAC block names which were incorrect for FMan v3 devices (i.e. DTSEC, TGEC) and had weird formatting (i.e. FM1@DTSEC6, FM1@TGEC1). The legacy code is left unchanged in this respect. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
1c710187 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: separate receive buffer free code Move the receive buffer free code in a separate function. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
8313cb02 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: change init_phy() param Change the init_phy() parameter to simplify the code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
9b2e892e |
|
04-May-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: minor fix in DM ETH support Bus callback functions for read/write/reset need to be set only for DM_ETH, moving endif a bit lower. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f7ae49fc |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop log.h from common header Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e6f6f9e6 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop part.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
6eb32a03 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: add DM ETH support Probe the FMan MACs based on the device tree while retaining the legacy code/functionality. One notable change introduced here is that, for DM_ETH, the name of the interfaces is corrected to the fmX-macY format, that avoids the referral to the MAC block names which were incorrect for FMan v3 devices (i.e. DTSEC, TGEC) and had weird formatting (i.e. FM1@DTSEC6, FM1@TGEC1). The legacy code is left unchanged in this respect. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
1c710187 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: separate receive buffer free code Move the receive buffer free code in a separate function. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
8313cb02 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: change init_phy() param Change the init_phy() parameter to simplify the code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
9b2e892e |
|
04-May-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: minor fix in DM ETH support Bus callback functions for read/write/reset need to be set only for DM_ETH, moving endif a bit lower. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f7ae49fc |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop log.h from common header Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e6f6f9e6 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop part.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
6eb32a03 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: add DM ETH support Probe the FMan MACs based on the device tree while retaining the legacy code/functionality. One notable change introduced here is that, for DM_ETH, the name of the interfaces is corrected to the fmX-macY format, that avoids the referral to the MAC block names which were incorrect for FMan v3 devices (i.e. DTSEC, TGEC) and had weird formatting (i.e. FM1@DTSEC6, FM1@TGEC1). The legacy code is left unchanged in this respect. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
1c710187 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: separate receive buffer free code Move the receive buffer free code in a separate function. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
8313cb02 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: change init_phy() param Change the init_phy() parameter to simplify the code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
9b2e892e |
|
04-May-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: minor fix in DM ETH support Bus callback functions for read/write/reset need to be set only for DM_ETH, moving endif a bit lower. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f7ae49fc |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop log.h from common header Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e6f6f9e6 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop part.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
6eb32a03 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: add DM ETH support Probe the FMan MACs based on the device tree while retaining the legacy code/functionality. One notable change introduced here is that, for DM_ETH, the name of the interfaces is corrected to the fmX-macY format, that avoids the referral to the MAC block names which were incorrect for FMan v3 devices (i.e. DTSEC, TGEC) and had weird formatting (i.e. FM1@DTSEC6, FM1@TGEC1). The legacy code is left unchanged in this respect. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
1c710187 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: separate receive buffer free code Move the receive buffer free code in a separate function. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
8313cb02 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: change init_phy() param Change the init_phy() parameter to simplify the code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
9b2e892e |
|
04-May-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: minor fix in DM ETH support Bus callback functions for read/write/reset need to be set only for DM_ETH, moving endif a bit lower. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f7ae49fc |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop log.h from common header Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e6f6f9e6 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop part.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
6eb32a03 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: add DM ETH support Probe the FMan MACs based on the device tree while retaining the legacy code/functionality. One notable change introduced here is that, for DM_ETH, the name of the interfaces is corrected to the fmX-macY format, that avoids the referral to the MAC block names which were incorrect for FMan v3 devices (i.e. DTSEC, TGEC) and had weird formatting (i.e. FM1@DTSEC6, FM1@TGEC1). The legacy code is left unchanged in this respect. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
1c710187 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: separate receive buffer free code Move the receive buffer free code in a separate function. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
8313cb02 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: change init_phy() param Change the init_phy() parameter to simplify the code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
9b2e892e |
|
04-May-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: minor fix in DM ETH support Bus callback functions for read/write/reset need to be set only for DM_ETH, moving endif a bit lower. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f7ae49fc |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop log.h from common header Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e6f6f9e6 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop part.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
6eb32a03 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: add DM ETH support Probe the FMan MACs based on the device tree while retaining the legacy code/functionality. One notable change introduced here is that, for DM_ETH, the name of the interfaces is corrected to the fmX-macY format, that avoids the referral to the MAC block names which were incorrect for FMan v3 devices (i.e. DTSEC, TGEC) and had weird formatting (i.e. FM1@DTSEC6, FM1@TGEC1). The legacy code is left unchanged in this respect. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
1c710187 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: separate receive buffer free code Move the receive buffer free code in a separate function. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
8313cb02 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: change init_phy() param Change the init_phy() parameter to simplify the code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
9b2e892e |
|
04-May-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: minor fix in DM ETH support Bus callback functions for read/write/reset need to be set only for DM_ETH, moving endif a bit lower. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f7ae49fc |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop log.h from common header Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e6f6f9e6 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop part.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
6eb32a03 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: add DM ETH support Probe the FMan MACs based on the device tree while retaining the legacy code/functionality. One notable change introduced here is that, for DM_ETH, the name of the interfaces is corrected to the fmX-macY format, that avoids the referral to the MAC block names which were incorrect for FMan v3 devices (i.e. DTSEC, TGEC) and had weird formatting (i.e. FM1@DTSEC6, FM1@TGEC1). The legacy code is left unchanged in this respect. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
1c710187 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: separate receive buffer free code Move the receive buffer free code in a separate function. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
8313cb02 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: change init_phy() param Change the init_phy() parameter to simplify the code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
9b2e892e |
|
04-May-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: minor fix in DM ETH support Bus callback functions for read/write/reset need to be set only for DM_ETH, moving endif a bit lower. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f7ae49fc |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop log.h from common header Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e6f6f9e6 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop part.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
6eb32a03 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: add DM ETH support Probe the FMan MACs based on the device tree while retaining the legacy code/functionality. One notable change introduced here is that, for DM_ETH, the name of the interfaces is corrected to the fmX-macY format, that avoids the referral to the MAC block names which were incorrect for FMan v3 devices (i.e. DTSEC, TGEC) and had weird formatting (i.e. FM1@DTSEC6, FM1@TGEC1). The legacy code is left unchanged in this respect. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
1c710187 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: separate receive buffer free code Move the receive buffer free code in a separate function. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
8313cb02 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: change init_phy() param Change the init_phy() parameter to simplify the code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
9b2e892e |
|
04-May-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: minor fix in DM ETH support Bus callback functions for read/write/reset need to be set only for DM_ETH, moving endif a bit lower. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f7ae49fc |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop log.h from common header Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e6f6f9e6 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop part.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
6eb32a03 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: add DM ETH support Probe the FMan MACs based on the device tree while retaining the legacy code/functionality. One notable change introduced here is that, for DM_ETH, the name of the interfaces is corrected to the fmX-macY format, that avoids the referral to the MAC block names which were incorrect for FMan v3 devices (i.e. DTSEC, TGEC) and had weird formatting (i.e. FM1@DTSEC6, FM1@TGEC1). The legacy code is left unchanged in this respect. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
1c710187 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: separate receive buffer free code Move the receive buffer free code in a separate function. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
8313cb02 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: change init_phy() param Change the init_phy() parameter to simplify the code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
9b2e892e |
|
04-May-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: minor fix in DM ETH support Bus callback functions for read/write/reset need to be set only for DM_ETH, moving endif a bit lower. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f7ae49fc |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop log.h from common header Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e6f6f9e6 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop part.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
6eb32a03 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: add DM ETH support Probe the FMan MACs based on the device tree while retaining the legacy code/functionality. One notable change introduced here is that, for DM_ETH, the name of the interfaces is corrected to the fmX-macY format, that avoids the referral to the MAC block names which were incorrect for FMan v3 devices (i.e. DTSEC, TGEC) and had weird formatting (i.e. FM1@DTSEC6, FM1@TGEC1). The legacy code is left unchanged in this respect. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
1c710187 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: separate receive buffer free code Move the receive buffer free code in a separate function. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
8313cb02 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: change init_phy() param Change the init_phy() parameter to simplify the code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
9b2e892e |
|
04-May-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: minor fix in DM ETH support Bus callback functions for read/write/reset need to be set only for DM_ETH, moving endif a bit lower. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f7ae49fc |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop log.h from common header Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e6f6f9e6 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop part.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
6eb32a03 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: add DM ETH support Probe the FMan MACs based on the device tree while retaining the legacy code/functionality. One notable change introduced here is that, for DM_ETH, the name of the interfaces is corrected to the fmX-macY format, that avoids the referral to the MAC block names which were incorrect for FMan v3 devices (i.e. DTSEC, TGEC) and had weird formatting (i.e. FM1@DTSEC6, FM1@TGEC1). The legacy code is left unchanged in this respect. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
1c710187 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: separate receive buffer free code Move the receive buffer free code in a separate function. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
8313cb02 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: change init_phy() param Change the init_phy() parameter to simplify the code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
9b2e892e |
|
04-May-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: minor fix in DM ETH support Bus callback functions for read/write/reset need to be set only for DM_ETH, moving endif a bit lower. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f7ae49fc |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop log.h from common header Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e6f6f9e6 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop part.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
6eb32a03 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: add DM ETH support Probe the FMan MACs based on the device tree while retaining the legacy code/functionality. One notable change introduced here is that, for DM_ETH, the name of the interfaces is corrected to the fmX-macY format, that avoids the referral to the MAC block names which were incorrect for FMan v3 devices (i.e. DTSEC, TGEC) and had weird formatting (i.e. FM1@DTSEC6, FM1@TGEC1). The legacy code is left unchanged in this respect. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
1c710187 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: separate receive buffer free code Move the receive buffer free code in a separate function. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
8313cb02 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: change init_phy() param Change the init_phy() parameter to simplify the code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
9b2e892e |
|
04-May-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: minor fix in DM ETH support Bus callback functions for read/write/reset need to be set only for DM_ETH, moving endif a bit lower. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f7ae49fc |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop log.h from common header Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e6f6f9e6 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop part.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
6eb32a03 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: add DM ETH support Probe the FMan MACs based on the device tree while retaining the legacy code/functionality. One notable change introduced here is that, for DM_ETH, the name of the interfaces is corrected to the fmX-macY format, that avoids the referral to the MAC block names which were incorrect for FMan v3 devices (i.e. DTSEC, TGEC) and had weird formatting (i.e. FM1@DTSEC6, FM1@TGEC1). The legacy code is left unchanged in this respect. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
1c710187 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: separate receive buffer free code Move the receive buffer free code in a separate function. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
8313cb02 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: change init_phy() param Change the init_phy() parameter to simplify the code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
9b2e892e |
|
04-May-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: minor fix in DM ETH support Bus callback functions for read/write/reset need to be set only for DM_ETH, moving endif a bit lower. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f7ae49fc |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop log.h from common header Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e6f6f9e6 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop part.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
6eb32a03 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: add DM ETH support Probe the FMan MACs based on the device tree while retaining the legacy code/functionality. One notable change introduced here is that, for DM_ETH, the name of the interfaces is corrected to the fmX-macY format, that avoids the referral to the MAC block names which were incorrect for FMan v3 devices (i.e. DTSEC, TGEC) and had weird formatting (i.e. FM1@DTSEC6, FM1@TGEC1). The legacy code is left unchanged in this respect. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
1c710187 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: separate receive buffer free code Move the receive buffer free code in a separate function. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
8313cb02 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: change init_phy() param Change the init_phy() parameter to simplify the code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
9b2e892e |
|
04-May-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: minor fix in DM ETH support Bus callback functions for read/write/reset need to be set only for DM_ETH, moving endif a bit lower. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f7ae49fc |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop log.h from common header Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e6f6f9e6 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop part.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
6eb32a03 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: add DM ETH support Probe the FMan MACs based on the device tree while retaining the legacy code/functionality. One notable change introduced here is that, for DM_ETH, the name of the interfaces is corrected to the fmX-macY format, that avoids the referral to the MAC block names which were incorrect for FMan v3 devices (i.e. DTSEC, TGEC) and had weird formatting (i.e. FM1@DTSEC6, FM1@TGEC1). The legacy code is left unchanged in this respect. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
1c710187 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: separate receive buffer free code Move the receive buffer free code in a separate function. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
8313cb02 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: change init_phy() param Change the init_phy() parameter to simplify the code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
9b2e892e |
|
04-May-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: minor fix in DM ETH support Bus callback functions for read/write/reset need to be set only for DM_ETH, moving endif a bit lower. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f7ae49fc |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop log.h from common header Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e6f6f9e6 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop part.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
6eb32a03 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: add DM ETH support Probe the FMan MACs based on the device tree while retaining the legacy code/functionality. One notable change introduced here is that, for DM_ETH, the name of the interfaces is corrected to the fmX-macY format, that avoids the referral to the MAC block names which were incorrect for FMan v3 devices (i.e. DTSEC, TGEC) and had weird formatting (i.e. FM1@DTSEC6, FM1@TGEC1). The legacy code is left unchanged in this respect. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
1c710187 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: separate receive buffer free code Move the receive buffer free code in a separate function. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
8313cb02 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: change init_phy() param Change the init_phy() parameter to simplify the code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
9b2e892e |
|
04-May-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: minor fix in DM ETH support Bus callback functions for read/write/reset need to be set only for DM_ETH, moving endif a bit lower. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f7ae49fc |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop log.h from common header Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e6f6f9e6 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop part.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
6eb32a03 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: add DM ETH support Probe the FMan MACs based on the device tree while retaining the legacy code/functionality. One notable change introduced here is that, for DM_ETH, the name of the interfaces is corrected to the fmX-macY format, that avoids the referral to the MAC block names which were incorrect for FMan v3 devices (i.e. DTSEC, TGEC) and had weird formatting (i.e. FM1@DTSEC6, FM1@TGEC1). The legacy code is left unchanged in this respect. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
1c710187 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: separate receive buffer free code Move the receive buffer free code in a separate function. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
8313cb02 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: change init_phy() param Change the init_phy() parameter to simplify the code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
9b2e892e |
|
04-May-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: minor fix in DM ETH support Bus callback functions for read/write/reset need to be set only for DM_ETH, moving endif a bit lower. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f7ae49fc |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop log.h from common header Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e6f6f9e6 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop part.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
6eb32a03 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: add DM ETH support Probe the FMan MACs based on the device tree while retaining the legacy code/functionality. One notable change introduced here is that, for DM_ETH, the name of the interfaces is corrected to the fmX-macY format, that avoids the referral to the MAC block names which were incorrect for FMan v3 devices (i.e. DTSEC, TGEC) and had weird formatting (i.e. FM1@DTSEC6, FM1@TGEC1). The legacy code is left unchanged in this respect. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
1c710187 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: separate receive buffer free code Move the receive buffer free code in a separate function. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
8313cb02 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: change init_phy() param Change the init_phy() parameter to simplify the code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
9b2e892e |
|
04-May-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: minor fix in DM ETH support Bus callback functions for read/write/reset need to be set only for DM_ETH, moving endif a bit lower. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f7ae49fc |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop log.h from common header Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e6f6f9e6 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop part.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
6eb32a03 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: add DM ETH support Probe the FMan MACs based on the device tree while retaining the legacy code/functionality. One notable change introduced here is that, for DM_ETH, the name of the interfaces is corrected to the fmX-macY format, that avoids the referral to the MAC block names which were incorrect for FMan v3 devices (i.e. DTSEC, TGEC) and had weird formatting (i.e. FM1@DTSEC6, FM1@TGEC1). The legacy code is left unchanged in this respect. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
1c710187 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: separate receive buffer free code Move the receive buffer free code in a separate function. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
8313cb02 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: change init_phy() param Change the init_phy() parameter to simplify the code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
9b2e892e |
|
04-May-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: minor fix in DM ETH support Bus callback functions for read/write/reset need to be set only for DM_ETH, moving endif a bit lower. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f7ae49fc |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop log.h from common header Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e6f6f9e6 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop part.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
6eb32a03 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: add DM ETH support Probe the FMan MACs based on the device tree while retaining the legacy code/functionality. One notable change introduced here is that, for DM_ETH, the name of the interfaces is corrected to the fmX-macY format, that avoids the referral to the MAC block names which were incorrect for FMan v3 devices (i.e. DTSEC, TGEC) and had weird formatting (i.e. FM1@DTSEC6, FM1@TGEC1). The legacy code is left unchanged in this respect. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
1c710187 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: separate receive buffer free code Move the receive buffer free code in a separate function. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
8313cb02 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: change init_phy() param Change the init_phy() parameter to simplify the code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
9b2e892e |
|
04-May-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: minor fix in DM ETH support Bus callback functions for read/write/reset need to be set only for DM_ETH, moving endif a bit lower. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f7ae49fc |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop log.h from common header Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e6f6f9e6 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop part.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
6eb32a03 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: add DM ETH support Probe the FMan MACs based on the device tree while retaining the legacy code/functionality. One notable change introduced here is that, for DM_ETH, the name of the interfaces is corrected to the fmX-macY format, that avoids the referral to the MAC block names which were incorrect for FMan v3 devices (i.e. DTSEC, TGEC) and had weird formatting (i.e. FM1@DTSEC6, FM1@TGEC1). The legacy code is left unchanged in this respect. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
1c710187 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: separate receive buffer free code Move the receive buffer free code in a separate function. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
8313cb02 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: change init_phy() param Change the init_phy() parameter to simplify the code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
9b2e892e |
|
04-May-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: minor fix in DM ETH support Bus callback functions for read/write/reset need to be set only for DM_ETH, moving endif a bit lower. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f7ae49fc |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop log.h from common header Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e6f6f9e6 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop part.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
6eb32a03 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: add DM ETH support Probe the FMan MACs based on the device tree while retaining the legacy code/functionality. One notable change introduced here is that, for DM_ETH, the name of the interfaces is corrected to the fmX-macY format, that avoids the referral to the MAC block names which were incorrect for FMan v3 devices (i.e. DTSEC, TGEC) and had weird formatting (i.e. FM1@DTSEC6, FM1@TGEC1). The legacy code is left unchanged in this respect. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
1c710187 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: separate receive buffer free code Move the receive buffer free code in a separate function. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
8313cb02 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: change init_phy() param Change the init_phy() parameter to simplify the code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
9b2e892e |
|
04-May-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: minor fix in DM ETH support Bus callback functions for read/write/reset need to be set only for DM_ETH, moving endif a bit lower. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f7ae49fc |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop log.h from common header Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e6f6f9e6 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop part.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
6eb32a03 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: add DM ETH support Probe the FMan MACs based on the device tree while retaining the legacy code/functionality. One notable change introduced here is that, for DM_ETH, the name of the interfaces is corrected to the fmX-macY format, that avoids the referral to the MAC block names which were incorrect for FMan v3 devices (i.e. DTSEC, TGEC) and had weird formatting (i.e. FM1@DTSEC6, FM1@TGEC1). The legacy code is left unchanged in this respect. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
1c710187 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: separate receive buffer free code Move the receive buffer free code in a separate function. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
8313cb02 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: change init_phy() param Change the init_phy() parameter to simplify the code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
9b2e892e |
|
04-May-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: minor fix in DM ETH support Bus callback functions for read/write/reset need to be set only for DM_ETH, moving endif a bit lower. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f7ae49fc |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop log.h from common header Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e6f6f9e6 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop part.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
6eb32a03 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: add DM ETH support Probe the FMan MACs based on the device tree while retaining the legacy code/functionality. One notable change introduced here is that, for DM_ETH, the name of the interfaces is corrected to the fmX-macY format, that avoids the referral to the MAC block names which were incorrect for FMan v3 devices (i.e. DTSEC, TGEC) and had weird formatting (i.e. FM1@DTSEC6, FM1@TGEC1). The legacy code is left unchanged in this respect. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
1c710187 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: separate receive buffer free code Move the receive buffer free code in a separate function. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
8313cb02 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: change init_phy() param Change the init_phy() parameter to simplify the code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
9b2e892e |
|
04-May-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: minor fix in DM ETH support Bus callback functions for read/write/reset need to be set only for DM_ETH, moving endif a bit lower. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f7ae49fc |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop log.h from common header Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e6f6f9e6 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop part.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
6eb32a03 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: add DM ETH support Probe the FMan MACs based on the device tree while retaining the legacy code/functionality. One notable change introduced here is that, for DM_ETH, the name of the interfaces is corrected to the fmX-macY format, that avoids the referral to the MAC block names which were incorrect for FMan v3 devices (i.e. DTSEC, TGEC) and had weird formatting (i.e. FM1@DTSEC6, FM1@TGEC1). The legacy code is left unchanged in this respect. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
1c710187 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: separate receive buffer free code Move the receive buffer free code in a separate function. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
8313cb02 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: change init_phy() param Change the init_phy() parameter to simplify the code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
9b2e892e |
|
04-May-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: minor fix in DM ETH support Bus callback functions for read/write/reset need to be set only for DM_ETH, moving endif a bit lower. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f7ae49fc |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop log.h from common header Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e6f6f9e6 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop part.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
6eb32a03 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: add DM ETH support Probe the FMan MACs based on the device tree while retaining the legacy code/functionality. One notable change introduced here is that, for DM_ETH, the name of the interfaces is corrected to the fmX-macY format, that avoids the referral to the MAC block names which were incorrect for FMan v3 devices (i.e. DTSEC, TGEC) and had weird formatting (i.e. FM1@DTSEC6, FM1@TGEC1). The legacy code is left unchanged in this respect. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
1c710187 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: separate receive buffer free code Move the receive buffer free code in a separate function. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
8313cb02 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: change init_phy() param Change the init_phy() parameter to simplify the code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
9b2e892e |
|
04-May-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: minor fix in DM ETH support Bus callback functions for read/write/reset need to be set only for DM_ETH, moving endif a bit lower. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f7ae49fc |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop log.h from common header Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e6f6f9e6 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop part.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
6eb32a03 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: add DM ETH support Probe the FMan MACs based on the device tree while retaining the legacy code/functionality. One notable change introduced here is that, for DM_ETH, the name of the interfaces is corrected to the fmX-macY format, that avoids the referral to the MAC block names which were incorrect for FMan v3 devices (i.e. DTSEC, TGEC) and had weird formatting (i.e. FM1@DTSEC6, FM1@TGEC1). The legacy code is left unchanged in this respect. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
1c710187 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: separate receive buffer free code Move the receive buffer free code in a separate function. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
8313cb02 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: change init_phy() param Change the init_phy() parameter to simplify the code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
9b2e892e |
|
04-May-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: minor fix in DM ETH support Bus callback functions for read/write/reset need to be set only for DM_ETH, moving endif a bit lower. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f7ae49fc |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop log.h from common header Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e6f6f9e6 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop part.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
6eb32a03 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: add DM ETH support Probe the FMan MACs based on the device tree while retaining the legacy code/functionality. One notable change introduced here is that, for DM_ETH, the name of the interfaces is corrected to the fmX-macY format, that avoids the referral to the MAC block names which were incorrect for FMan v3 devices (i.e. DTSEC, TGEC) and had weird formatting (i.e. FM1@DTSEC6, FM1@TGEC1). The legacy code is left unchanged in this respect. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
1c710187 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: separate receive buffer free code Move the receive buffer free code in a separate function. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
8313cb02 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: change init_phy() param Change the init_phy() parameter to simplify the code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
9b2e892e |
|
04-May-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: minor fix in DM ETH support Bus callback functions for read/write/reset need to be set only for DM_ETH, moving endif a bit lower. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f7ae49fc |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop log.h from common header Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e6f6f9e6 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop part.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
6eb32a03 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: add DM ETH support Probe the FMan MACs based on the device tree while retaining the legacy code/functionality. One notable change introduced here is that, for DM_ETH, the name of the interfaces is corrected to the fmX-macY format, that avoids the referral to the MAC block names which were incorrect for FMan v3 devices (i.e. DTSEC, TGEC) and had weird formatting (i.e. FM1@DTSEC6, FM1@TGEC1). The legacy code is left unchanged in this respect. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
1c710187 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: separate receive buffer free code Move the receive buffer free code in a separate function. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
8313cb02 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: change init_phy() param Change the init_phy() parameter to simplify the code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
9b2e892e |
|
04-May-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: minor fix in DM ETH support Bus callback functions for read/write/reset need to be set only for DM_ETH, moving endif a bit lower. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f7ae49fc |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop log.h from common header Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e6f6f9e6 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop part.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
6eb32a03 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: add DM ETH support Probe the FMan MACs based on the device tree while retaining the legacy code/functionality. One notable change introduced here is that, for DM_ETH, the name of the interfaces is corrected to the fmX-macY format, that avoids the referral to the MAC block names which were incorrect for FMan v3 devices (i.e. DTSEC, TGEC) and had weird formatting (i.e. FM1@DTSEC6, FM1@TGEC1). The legacy code is left unchanged in this respect. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
1c710187 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: separate receive buffer free code Move the receive buffer free code in a separate function. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
8313cb02 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: change init_phy() param Change the init_phy() parameter to simplify the code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
9b2e892e |
|
04-May-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: minor fix in DM ETH support Bus callback functions for read/write/reset need to be set only for DM_ETH, moving endif a bit lower. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f7ae49fc |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop log.h from common header Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e6f6f9e6 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop part.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
6eb32a03 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: add DM ETH support Probe the FMan MACs based on the device tree while retaining the legacy code/functionality. One notable change introduced here is that, for DM_ETH, the name of the interfaces is corrected to the fmX-macY format, that avoids the referral to the MAC block names which were incorrect for FMan v3 devices (i.e. DTSEC, TGEC) and had weird formatting (i.e. FM1@DTSEC6, FM1@TGEC1). The legacy code is left unchanged in this respect. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
1c710187 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: separate receive buffer free code Move the receive buffer free code in a separate function. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
8313cb02 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: change init_phy() param Change the init_phy() parameter to simplify the code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
9b2e892e |
|
04-May-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: minor fix in DM ETH support Bus callback functions for read/write/reset need to be set only for DM_ETH, moving endif a bit lower. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f7ae49fc |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop log.h from common header Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e6f6f9e6 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop part.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
6eb32a03 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: add DM ETH support Probe the FMan MACs based on the device tree while retaining the legacy code/functionality. One notable change introduced here is that, for DM_ETH, the name of the interfaces is corrected to the fmX-macY format, that avoids the referral to the MAC block names which were incorrect for FMan v3 devices (i.e. DTSEC, TGEC) and had weird formatting (i.e. FM1@DTSEC6, FM1@TGEC1). The legacy code is left unchanged in this respect. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
1c710187 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: separate receive buffer free code Move the receive buffer free code in a separate function. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
8313cb02 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: change init_phy() param Change the init_phy() parameter to simplify the code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
9b2e892e |
|
04-May-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: minor fix in DM ETH support Bus callback functions for read/write/reset need to be set only for DM_ETH, moving endif a bit lower. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f7ae49fc |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop log.h from common header Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e6f6f9e6 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop part.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
6eb32a03 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: add DM ETH support Probe the FMan MACs based on the device tree while retaining the legacy code/functionality. One notable change introduced here is that, for DM_ETH, the name of the interfaces is corrected to the fmX-macY format, that avoids the referral to the MAC block names which were incorrect for FMan v3 devices (i.e. DTSEC, TGEC) and had weird formatting (i.e. FM1@DTSEC6, FM1@TGEC1). The legacy code is left unchanged in this respect. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
1c710187 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: separate receive buffer free code Move the receive buffer free code in a separate function. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
8313cb02 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: change init_phy() param Change the init_phy() parameter to simplify the code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
9b2e892e |
|
04-May-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: minor fix in DM ETH support Bus callback functions for read/write/reset need to be set only for DM_ETH, moving endif a bit lower. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f7ae49fc |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop log.h from common header Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e6f6f9e6 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop part.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
6eb32a03 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: add DM ETH support Probe the FMan MACs based on the device tree while retaining the legacy code/functionality. One notable change introduced here is that, for DM_ETH, the name of the interfaces is corrected to the fmX-macY format, that avoids the referral to the MAC block names which were incorrect for FMan v3 devices (i.e. DTSEC, TGEC) and had weird formatting (i.e. FM1@DTSEC6, FM1@TGEC1). The legacy code is left unchanged in this respect. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
1c710187 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: separate receive buffer free code Move the receive buffer free code in a separate function. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
8313cb02 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: change init_phy() param Change the init_phy() parameter to simplify the code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
9b2e892e |
|
04-May-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: minor fix in DM ETH support Bus callback functions for read/write/reset need to be set only for DM_ETH, moving endif a bit lower. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f7ae49fc |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop log.h from common header Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e6f6f9e6 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop part.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
6eb32a03 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: add DM ETH support Probe the FMan MACs based on the device tree while retaining the legacy code/functionality. One notable change introduced here is that, for DM_ETH, the name of the interfaces is corrected to the fmX-macY format, that avoids the referral to the MAC block names which were incorrect for FMan v3 devices (i.e. DTSEC, TGEC) and had weird formatting (i.e. FM1@DTSEC6, FM1@TGEC1). The legacy code is left unchanged in this respect. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
1c710187 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: separate receive buffer free code Move the receive buffer free code in a separate function. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
8313cb02 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: change init_phy() param Change the init_phy() parameter to simplify the code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
9b2e892e |
|
04-May-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: minor fix in DM ETH support Bus callback functions for read/write/reset need to be set only for DM_ETH, moving endif a bit lower. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f7ae49fc |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop log.h from common header Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e6f6f9e6 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop part.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
6eb32a03 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: add DM ETH support Probe the FMan MACs based on the device tree while retaining the legacy code/functionality. One notable change introduced here is that, for DM_ETH, the name of the interfaces is corrected to the fmX-macY format, that avoids the referral to the MAC block names which were incorrect for FMan v3 devices (i.e. DTSEC, TGEC) and had weird formatting (i.e. FM1@DTSEC6, FM1@TGEC1). The legacy code is left unchanged in this respect. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
1c710187 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: separate receive buffer free code Move the receive buffer free code in a separate function. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
8313cb02 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: change init_phy() param Change the init_phy() parameter to simplify the code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
9b2e892e |
|
04-May-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: minor fix in DM ETH support Bus callback functions for read/write/reset need to be set only for DM_ETH, moving endif a bit lower. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f7ae49fc |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop log.h from common header Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e6f6f9e6 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop part.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
6eb32a03 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: add DM ETH support Probe the FMan MACs based on the device tree while retaining the legacy code/functionality. One notable change introduced here is that, for DM_ETH, the name of the interfaces is corrected to the fmX-macY format, that avoids the referral to the MAC block names which were incorrect for FMan v3 devices (i.e. DTSEC, TGEC) and had weird formatting (i.e. FM1@DTSEC6, FM1@TGEC1). The legacy code is left unchanged in this respect. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
1c710187 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: separate receive buffer free code Move the receive buffer free code in a separate function. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
8313cb02 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: change init_phy() param Change the init_phy() parameter to simplify the code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
9b2e892e |
|
04-May-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: minor fix in DM ETH support Bus callback functions for read/write/reset need to be set only for DM_ETH, moving endif a bit lower. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f7ae49fc |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop log.h from common header Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e6f6f9e6 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop part.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
6eb32a03 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: add DM ETH support Probe the FMan MACs based on the device tree while retaining the legacy code/functionality. One notable change introduced here is that, for DM_ETH, the name of the interfaces is corrected to the fmX-macY format, that avoids the referral to the MAC block names which were incorrect for FMan v3 devices (i.e. DTSEC, TGEC) and had weird formatting (i.e. FM1@DTSEC6, FM1@TGEC1). The legacy code is left unchanged in this respect. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
1c710187 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: separate receive buffer free code Move the receive buffer free code in a separate function. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
8313cb02 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: change init_phy() param Change the init_phy() parameter to simplify the code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
9b2e892e |
|
04-May-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: minor fix in DM ETH support Bus callback functions for read/write/reset need to be set only for DM_ETH, moving endif a bit lower. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f7ae49fc |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop log.h from common header Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e6f6f9e6 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop part.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
6eb32a03 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: add DM ETH support Probe the FMan MACs based on the device tree while retaining the legacy code/functionality. One notable change introduced here is that, for DM_ETH, the name of the interfaces is corrected to the fmX-macY format, that avoids the referral to the MAC block names which were incorrect for FMan v3 devices (i.e. DTSEC, TGEC) and had weird formatting (i.e. FM1@DTSEC6, FM1@TGEC1). The legacy code is left unchanged in this respect. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
1c710187 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: separate receive buffer free code Move the receive buffer free code in a separate function. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
8313cb02 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: change init_phy() param Change the init_phy() parameter to simplify the code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
9b2e892e |
|
04-May-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: minor fix in DM ETH support Bus callback functions for read/write/reset need to be set only for DM_ETH, moving endif a bit lower. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f7ae49fc |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop log.h from common header Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e6f6f9e6 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop part.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
6eb32a03 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: add DM ETH support Probe the FMan MACs based on the device tree while retaining the legacy code/functionality. One notable change introduced here is that, for DM_ETH, the name of the interfaces is corrected to the fmX-macY format, that avoids the referral to the MAC block names which were incorrect for FMan v3 devices (i.e. DTSEC, TGEC) and had weird formatting (i.e. FM1@DTSEC6, FM1@TGEC1). The legacy code is left unchanged in this respect. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
1c710187 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: separate receive buffer free code Move the receive buffer free code in a separate function. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
8313cb02 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: change init_phy() param Change the init_phy() parameter to simplify the code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
9b2e892e |
|
04-May-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: minor fix in DM ETH support Bus callback functions for read/write/reset need to be set only for DM_ETH, moving endif a bit lower. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f7ae49fc |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop log.h from common header Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e6f6f9e6 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop part.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
6eb32a03 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: add DM ETH support Probe the FMan MACs based on the device tree while retaining the legacy code/functionality. One notable change introduced here is that, for DM_ETH, the name of the interfaces is corrected to the fmX-macY format, that avoids the referral to the MAC block names which were incorrect for FMan v3 devices (i.e. DTSEC, TGEC) and had weird formatting (i.e. FM1@DTSEC6, FM1@TGEC1). The legacy code is left unchanged in this respect. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
1c710187 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: separate receive buffer free code Move the receive buffer free code in a separate function. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
8313cb02 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: change init_phy() param Change the init_phy() parameter to simplify the code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
9b2e892e |
|
04-May-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: minor fix in DM ETH support Bus callback functions for read/write/reset need to be set only for DM_ETH, moving endif a bit lower. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f7ae49fc |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop log.h from common header Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e6f6f9e6 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop part.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
6eb32a03 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: add DM ETH support Probe the FMan MACs based on the device tree while retaining the legacy code/functionality. One notable change introduced here is that, for DM_ETH, the name of the interfaces is corrected to the fmX-macY format, that avoids the referral to the MAC block names which were incorrect for FMan v3 devices (i.e. DTSEC, TGEC) and had weird formatting (i.e. FM1@DTSEC6, FM1@TGEC1). The legacy code is left unchanged in this respect. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
1c710187 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: separate receive buffer free code Move the receive buffer free code in a separate function. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
8313cb02 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: change init_phy() param Change the init_phy() parameter to simplify the code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
9b2e892e |
|
04-May-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: minor fix in DM ETH support Bus callback functions for read/write/reset need to be set only for DM_ETH, moving endif a bit lower. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f7ae49fc |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop log.h from common header Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e6f6f9e6 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop part.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
6eb32a03 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: add DM ETH support Probe the FMan MACs based on the device tree while retaining the legacy code/functionality. One notable change introduced here is that, for DM_ETH, the name of the interfaces is corrected to the fmX-macY format, that avoids the referral to the MAC block names which were incorrect for FMan v3 devices (i.e. DTSEC, TGEC) and had weird formatting (i.e. FM1@DTSEC6, FM1@TGEC1). The legacy code is left unchanged in this respect. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
1c710187 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: separate receive buffer free code Move the receive buffer free code in a separate function. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
8313cb02 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: change init_phy() param Change the init_phy() parameter to simplify the code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
9b2e892e |
|
04-May-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: minor fix in DM ETH support Bus callback functions for read/write/reset need to be set only for DM_ETH, moving endif a bit lower. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f7ae49fc |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop log.h from common header Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e6f6f9e6 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop part.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
6eb32a03 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: add DM ETH support Probe the FMan MACs based on the device tree while retaining the legacy code/functionality. One notable change introduced here is that, for DM_ETH, the name of the interfaces is corrected to the fmX-macY format, that avoids the referral to the MAC block names which were incorrect for FMan v3 devices (i.e. DTSEC, TGEC) and had weird formatting (i.e. FM1@DTSEC6, FM1@TGEC1). The legacy code is left unchanged in this respect. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
1c710187 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: separate receive buffer free code Move the receive buffer free code in a separate function. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
8313cb02 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: change init_phy() param Change the init_phy() parameter to simplify the code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
9b2e892e |
|
04-May-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: minor fix in DM ETH support Bus callback functions for read/write/reset need to be set only for DM_ETH, moving endif a bit lower. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f7ae49fc |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop log.h from common header Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e6f6f9e6 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop part.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
6eb32a03 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: add DM ETH support Probe the FMan MACs based on the device tree while retaining the legacy code/functionality. One notable change introduced here is that, for DM_ETH, the name of the interfaces is corrected to the fmX-macY format, that avoids the referral to the MAC block names which were incorrect for FMan v3 devices (i.e. DTSEC, TGEC) and had weird formatting (i.e. FM1@DTSEC6, FM1@TGEC1). The legacy code is left unchanged in this respect. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
1c710187 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: separate receive buffer free code Move the receive buffer free code in a separate function. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
8313cb02 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: change init_phy() param Change the init_phy() parameter to simplify the code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
9b2e892e |
|
04-May-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: minor fix in DM ETH support Bus callback functions for read/write/reset need to be set only for DM_ETH, moving endif a bit lower. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f7ae49fc |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop log.h from common header Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e6f6f9e6 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop part.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
6eb32a03 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: add DM ETH support Probe the FMan MACs based on the device tree while retaining the legacy code/functionality. One notable change introduced here is that, for DM_ETH, the name of the interfaces is corrected to the fmX-macY format, that avoids the referral to the MAC block names which were incorrect for FMan v3 devices (i.e. DTSEC, TGEC) and had weird formatting (i.e. FM1@DTSEC6, FM1@TGEC1). The legacy code is left unchanged in this respect. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
1c710187 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: separate receive buffer free code Move the receive buffer free code in a separate function. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
8313cb02 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: change init_phy() param Change the init_phy() parameter to simplify the code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
9b2e892e |
|
04-May-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: minor fix in DM ETH support Bus callback functions for read/write/reset need to be set only for DM_ETH, moving endif a bit lower. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f7ae49fc |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop log.h from common header Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e6f6f9e6 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop part.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
6eb32a03 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: add DM ETH support Probe the FMan MACs based on the device tree while retaining the legacy code/functionality. One notable change introduced here is that, for DM_ETH, the name of the interfaces is corrected to the fmX-macY format, that avoids the referral to the MAC block names which were incorrect for FMan v3 devices (i.e. DTSEC, TGEC) and had weird formatting (i.e. FM1@DTSEC6, FM1@TGEC1). The legacy code is left unchanged in this respect. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
1c710187 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: separate receive buffer free code Move the receive buffer free code in a separate function. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
8313cb02 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: change init_phy() param Change the init_phy() parameter to simplify the code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
9b2e892e |
|
04-May-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: minor fix in DM ETH support Bus callback functions for read/write/reset need to be set only for DM_ETH, moving endif a bit lower. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f7ae49fc |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop log.h from common header Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e6f6f9e6 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop part.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
6eb32a03 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: add DM ETH support Probe the FMan MACs based on the device tree while retaining the legacy code/functionality. One notable change introduced here is that, for DM_ETH, the name of the interfaces is corrected to the fmX-macY format, that avoids the referral to the MAC block names which were incorrect for FMan v3 devices (i.e. DTSEC, TGEC) and had weird formatting (i.e. FM1@DTSEC6, FM1@TGEC1). The legacy code is left unchanged in this respect. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
1c710187 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: separate receive buffer free code Move the receive buffer free code in a separate function. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
8313cb02 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: change init_phy() param Change the init_phy() parameter to simplify the code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
9b2e892e |
|
04-May-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: minor fix in DM ETH support Bus callback functions for read/write/reset need to be set only for DM_ETH, moving endif a bit lower. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f7ae49fc |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop log.h from common header Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e6f6f9e6 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop part.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
6eb32a03 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: add DM ETH support Probe the FMan MACs based on the device tree while retaining the legacy code/functionality. One notable change introduced here is that, for DM_ETH, the name of the interfaces is corrected to the fmX-macY format, that avoids the referral to the MAC block names which were incorrect for FMan v3 devices (i.e. DTSEC, TGEC) and had weird formatting (i.e. FM1@DTSEC6, FM1@TGEC1). The legacy code is left unchanged in this respect. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
1c710187 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: separate receive buffer free code Move the receive buffer free code in a separate function. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
8313cb02 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: change init_phy() param Change the init_phy() parameter to simplify the code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
9b2e892e |
|
04-May-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: minor fix in DM ETH support Bus callback functions for read/write/reset need to be set only for DM_ETH, moving endif a bit lower. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f7ae49fc |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop log.h from common header Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e6f6f9e6 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop part.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
6eb32a03 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: add DM ETH support Probe the FMan MACs based on the device tree while retaining the legacy code/functionality. One notable change introduced here is that, for DM_ETH, the name of the interfaces is corrected to the fmX-macY format, that avoids the referral to the MAC block names which were incorrect for FMan v3 devices (i.e. DTSEC, TGEC) and had weird formatting (i.e. FM1@DTSEC6, FM1@TGEC1). The legacy code is left unchanged in this respect. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
1c710187 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: separate receive buffer free code Move the receive buffer free code in a separate function. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
8313cb02 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: change init_phy() param Change the init_phy() parameter to simplify the code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
9b2e892e |
|
04-May-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: minor fix in DM ETH support Bus callback functions for read/write/reset need to be set only for DM_ETH, moving endif a bit lower. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f7ae49fc |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop log.h from common header Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e6f6f9e6 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop part.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
6eb32a03 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: add DM ETH support Probe the FMan MACs based on the device tree while retaining the legacy code/functionality. One notable change introduced here is that, for DM_ETH, the name of the interfaces is corrected to the fmX-macY format, that avoids the referral to the MAC block names which were incorrect for FMan v3 devices (i.e. DTSEC, TGEC) and had weird formatting (i.e. FM1@DTSEC6, FM1@TGEC1). The legacy code is left unchanged in this respect. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
1c710187 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: separate receive buffer free code Move the receive buffer free code in a separate function. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
8313cb02 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: change init_phy() param Change the init_phy() parameter to simplify the code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
9b2e892e |
|
04-May-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: minor fix in DM ETH support Bus callback functions for read/write/reset need to be set only for DM_ETH, moving endif a bit lower. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f7ae49fc |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop log.h from common header Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e6f6f9e6 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop part.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
6eb32a03 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: add DM ETH support Probe the FMan MACs based on the device tree while retaining the legacy code/functionality. One notable change introduced here is that, for DM_ETH, the name of the interfaces is corrected to the fmX-macY format, that avoids the referral to the MAC block names which were incorrect for FMan v3 devices (i.e. DTSEC, TGEC) and had weird formatting (i.e. FM1@DTSEC6, FM1@TGEC1). The legacy code is left unchanged in this respect. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
1c710187 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: separate receive buffer free code Move the receive buffer free code in a separate function. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
8313cb02 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: change init_phy() param Change the init_phy() parameter to simplify the code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
9b2e892e |
|
04-May-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: minor fix in DM ETH support Bus callback functions for read/write/reset need to be set only for DM_ETH, moving endif a bit lower. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f7ae49fc |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop log.h from common header Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e6f6f9e6 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop part.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
6eb32a03 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: add DM ETH support Probe the FMan MACs based on the device tree while retaining the legacy code/functionality. One notable change introduced here is that, for DM_ETH, the name of the interfaces is corrected to the fmX-macY format, that avoids the referral to the MAC block names which were incorrect for FMan v3 devices (i.e. DTSEC, TGEC) and had weird formatting (i.e. FM1@DTSEC6, FM1@TGEC1). The legacy code is left unchanged in this respect. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
1c710187 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: separate receive buffer free code Move the receive buffer free code in a separate function. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
8313cb02 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: change init_phy() param Change the init_phy() parameter to simplify the code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
9b2e892e |
|
04-May-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: minor fix in DM ETH support Bus callback functions for read/write/reset need to be set only for DM_ETH, moving endif a bit lower. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f7ae49fc |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop log.h from common header Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e6f6f9e6 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop part.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
6eb32a03 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: add DM ETH support Probe the FMan MACs based on the device tree while retaining the legacy code/functionality. One notable change introduced here is that, for DM_ETH, the name of the interfaces is corrected to the fmX-macY format, that avoids the referral to the MAC block names which were incorrect for FMan v3 devices (i.e. DTSEC, TGEC) and had weird formatting (i.e. FM1@DTSEC6, FM1@TGEC1). The legacy code is left unchanged in this respect. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
1c710187 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: separate receive buffer free code Move the receive buffer free code in a separate function. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
8313cb02 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: change init_phy() param Change the init_phy() parameter to simplify the code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
9b2e892e |
|
04-May-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: minor fix in DM ETH support Bus callback functions for read/write/reset need to be set only for DM_ETH, moving endif a bit lower. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f7ae49fc |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop log.h from common header Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e6f6f9e6 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop part.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
6eb32a03 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: add DM ETH support Probe the FMan MACs based on the device tree while retaining the legacy code/functionality. One notable change introduced here is that, for DM_ETH, the name of the interfaces is corrected to the fmX-macY format, that avoids the referral to the MAC block names which were incorrect for FMan v3 devices (i.e. DTSEC, TGEC) and had weird formatting (i.e. FM1@DTSEC6, FM1@TGEC1). The legacy code is left unchanged in this respect. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
1c710187 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: separate receive buffer free code Move the receive buffer free code in a separate function. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
8313cb02 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: change init_phy() param Change the init_phy() parameter to simplify the code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
9b2e892e |
|
04-May-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: minor fix in DM ETH support Bus callback functions for read/write/reset need to be set only for DM_ETH, moving endif a bit lower. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f7ae49fc |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop log.h from common header Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e6f6f9e6 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop part.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
6eb32a03 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: add DM ETH support Probe the FMan MACs based on the device tree while retaining the legacy code/functionality. One notable change introduced here is that, for DM_ETH, the name of the interfaces is corrected to the fmX-macY format, that avoids the referral to the MAC block names which were incorrect for FMan v3 devices (i.e. DTSEC, TGEC) and had weird formatting (i.e. FM1@DTSEC6, FM1@TGEC1). The legacy code is left unchanged in this respect. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
1c710187 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: separate receive buffer free code Move the receive buffer free code in a separate function. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
8313cb02 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: change init_phy() param Change the init_phy() parameter to simplify the code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
9b2e892e |
|
04-May-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: minor fix in DM ETH support Bus callback functions for read/write/reset need to be set only for DM_ETH, moving endif a bit lower. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f7ae49fc |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop log.h from common header Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e6f6f9e6 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop part.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
6eb32a03 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: add DM ETH support Probe the FMan MACs based on the device tree while retaining the legacy code/functionality. One notable change introduced here is that, for DM_ETH, the name of the interfaces is corrected to the fmX-macY format, that avoids the referral to the MAC block names which were incorrect for FMan v3 devices (i.e. DTSEC, TGEC) and had weird formatting (i.e. FM1@DTSEC6, FM1@TGEC1). The legacy code is left unchanged in this respect. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
1c710187 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: separate receive buffer free code Move the receive buffer free code in a separate function. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
8313cb02 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: change init_phy() param Change the init_phy() parameter to simplify the code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
9b2e892e |
|
04-May-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: minor fix in DM ETH support Bus callback functions for read/write/reset need to be set only for DM_ETH, moving endif a bit lower. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f7ae49fc |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop log.h from common header Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e6f6f9e6 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop part.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
6eb32a03 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: add DM ETH support Probe the FMan MACs based on the device tree while retaining the legacy code/functionality. One notable change introduced here is that, for DM_ETH, the name of the interfaces is corrected to the fmX-macY format, that avoids the referral to the MAC block names which were incorrect for FMan v3 devices (i.e. DTSEC, TGEC) and had weird formatting (i.e. FM1@DTSEC6, FM1@TGEC1). The legacy code is left unchanged in this respect. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
1c710187 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: separate receive buffer free code Move the receive buffer free code in a separate function. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
8313cb02 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: change init_phy() param Change the init_phy() parameter to simplify the code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
9b2e892e |
|
04-May-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: minor fix in DM ETH support Bus callback functions for read/write/reset need to be set only for DM_ETH, moving endif a bit lower. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f7ae49fc |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop log.h from common header Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e6f6f9e6 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop part.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
6eb32a03 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: add DM ETH support Probe the FMan MACs based on the device tree while retaining the legacy code/functionality. One notable change introduced here is that, for DM_ETH, the name of the interfaces is corrected to the fmX-macY format, that avoids the referral to the MAC block names which were incorrect for FMan v3 devices (i.e. DTSEC, TGEC) and had weird formatting (i.e. FM1@DTSEC6, FM1@TGEC1). The legacy code is left unchanged in this respect. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
1c710187 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: separate receive buffer free code Move the receive buffer free code in a separate function. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
8313cb02 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: change init_phy() param Change the init_phy() parameter to simplify the code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
9b2e892e |
|
04-May-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: minor fix in DM ETH support Bus callback functions for read/write/reset need to be set only for DM_ETH, moving endif a bit lower. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f7ae49fc |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop log.h from common header Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e6f6f9e6 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop part.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
6eb32a03 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: add DM ETH support Probe the FMan MACs based on the device tree while retaining the legacy code/functionality. One notable change introduced here is that, for DM_ETH, the name of the interfaces is corrected to the fmX-macY format, that avoids the referral to the MAC block names which were incorrect for FMan v3 devices (i.e. DTSEC, TGEC) and had weird formatting (i.e. FM1@DTSEC6, FM1@TGEC1). The legacy code is left unchanged in this respect. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
1c710187 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: separate receive buffer free code Move the receive buffer free code in a separate function. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
8313cb02 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: change init_phy() param Change the init_phy() parameter to simplify the code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
9b2e892e |
|
04-May-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: minor fix in DM ETH support Bus callback functions for read/write/reset need to be set only for DM_ETH, moving endif a bit lower. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f7ae49fc |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop log.h from common header Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e6f6f9e6 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop part.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
6eb32a03 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: add DM ETH support Probe the FMan MACs based on the device tree while retaining the legacy code/functionality. One notable change introduced here is that, for DM_ETH, the name of the interfaces is corrected to the fmX-macY format, that avoids the referral to the MAC block names which were incorrect for FMan v3 devices (i.e. DTSEC, TGEC) and had weird formatting (i.e. FM1@DTSEC6, FM1@TGEC1). The legacy code is left unchanged in this respect. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
1c710187 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: separate receive buffer free code Move the receive buffer free code in a separate function. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
8313cb02 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: change init_phy() param Change the init_phy() parameter to simplify the code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
9b2e892e |
|
04-May-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: minor fix in DM ETH support Bus callback functions for read/write/reset need to be set only for DM_ETH, moving endif a bit lower. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f7ae49fc |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop log.h from common header Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e6f6f9e6 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop part.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
6eb32a03 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: add DM ETH support Probe the FMan MACs based on the device tree while retaining the legacy code/functionality. One notable change introduced here is that, for DM_ETH, the name of the interfaces is corrected to the fmX-macY format, that avoids the referral to the MAC block names which were incorrect for FMan v3 devices (i.e. DTSEC, TGEC) and had weird formatting (i.e. FM1@DTSEC6, FM1@TGEC1). The legacy code is left unchanged in this respect. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
1c710187 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: separate receive buffer free code Move the receive buffer free code in a separate function. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
8313cb02 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: change init_phy() param Change the init_phy() parameter to simplify the code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
9b2e892e |
|
04-May-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: minor fix in DM ETH support Bus callback functions for read/write/reset need to be set only for DM_ETH, moving endif a bit lower. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f7ae49fc |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop log.h from common header Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e6f6f9e6 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop part.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
6eb32a03 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: add DM ETH support Probe the FMan MACs based on the device tree while retaining the legacy code/functionality. One notable change introduced here is that, for DM_ETH, the name of the interfaces is corrected to the fmX-macY format, that avoids the referral to the MAC block names which were incorrect for FMan v3 devices (i.e. DTSEC, TGEC) and had weird formatting (i.e. FM1@DTSEC6, FM1@TGEC1). The legacy code is left unchanged in this respect. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
1c710187 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: separate receive buffer free code Move the receive buffer free code in a separate function. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
8313cb02 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: change init_phy() param Change the init_phy() parameter to simplify the code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
9b2e892e |
|
04-May-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: minor fix in DM ETH support Bus callback functions for read/write/reset need to be set only for DM_ETH, moving endif a bit lower. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f7ae49fc |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop log.h from common header Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e6f6f9e6 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop part.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
6eb32a03 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: add DM ETH support Probe the FMan MACs based on the device tree while retaining the legacy code/functionality. One notable change introduced here is that, for DM_ETH, the name of the interfaces is corrected to the fmX-macY format, that avoids the referral to the MAC block names which were incorrect for FMan v3 devices (i.e. DTSEC, TGEC) and had weird formatting (i.e. FM1@DTSEC6, FM1@TGEC1). The legacy code is left unchanged in this respect. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
1c710187 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: separate receive buffer free code Move the receive buffer free code in a separate function. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
8313cb02 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: change init_phy() param Change the init_phy() parameter to simplify the code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
9b2e892e |
|
04-May-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: minor fix in DM ETH support Bus callback functions for read/write/reset need to be set only for DM_ETH, moving endif a bit lower. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f7ae49fc |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop log.h from common header Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e6f6f9e6 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop part.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
6eb32a03 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: add DM ETH support Probe the FMan MACs based on the device tree while retaining the legacy code/functionality. One notable change introduced here is that, for DM_ETH, the name of the interfaces is corrected to the fmX-macY format, that avoids the referral to the MAC block names which were incorrect for FMan v3 devices (i.e. DTSEC, TGEC) and had weird formatting (i.e. FM1@DTSEC6, FM1@TGEC1). The legacy code is left unchanged in this respect. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
1c710187 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: separate receive buffer free code Move the receive buffer free code in a separate function. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
8313cb02 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: change init_phy() param Change the init_phy() parameter to simplify the code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
9b2e892e |
|
04-May-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: minor fix in DM ETH support Bus callback functions for read/write/reset need to be set only for DM_ETH, moving endif a bit lower. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f7ae49fc |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop log.h from common header Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e6f6f9e6 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop part.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
6eb32a03 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: add DM ETH support Probe the FMan MACs based on the device tree while retaining the legacy code/functionality. One notable change introduced here is that, for DM_ETH, the name of the interfaces is corrected to the fmX-macY format, that avoids the referral to the MAC block names which were incorrect for FMan v3 devices (i.e. DTSEC, TGEC) and had weird formatting (i.e. FM1@DTSEC6, FM1@TGEC1). The legacy code is left unchanged in this respect. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
1c710187 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: separate receive buffer free code Move the receive buffer free code in a separate function. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
8313cb02 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: change init_phy() param Change the init_phy() parameter to simplify the code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f7ae49fc |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop log.h from common header Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e6f6f9e6 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop part.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
6eb32a03 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: add DM ETH support Probe the FMan MACs based on the device tree while retaining the legacy code/functionality. One notable change introduced here is that, for DM_ETH, the name of the interfaces is corrected to the fmX-macY format, that avoids the referral to the MAC block names which were incorrect for FMan v3 devices (i.e. DTSEC, TGEC) and had weird formatting (i.e. FM1@DTSEC6, FM1@TGEC1). The legacy code is left unchanged in this respect. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
1c710187 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: separate receive buffer free code Move the receive buffer free code in a separate function. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
8313cb02 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: change init_phy() param Change the init_phy() parameter to simplify the code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
f7ae49fc |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop log.h from common header Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e6f6f9e6 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop part.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
6eb32a03 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: add DM ETH support Probe the FMan MACs based on the device tree while retaining the legacy code/functionality. One notable change introduced here is that, for DM_ETH, the name of the interfaces is corrected to the fmX-macY format, that avoids the referral to the MAC block names which were incorrect for FMan v3 devices (i.e. DTSEC, TGEC) and had weird formatting (i.e. FM1@DTSEC6, FM1@TGEC1). The legacy code is left unchanged in this respect. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
1c710187 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: separate receive buffer free code Move the receive buffer free code in a separate function. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
8313cb02 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: change init_phy() param Change the init_phy() parameter to simplify the code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
6eb32a03 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: add DM ETH support Probe the FMan MACs based on the device tree while retaining the legacy code/functionality. One notable change introduced here is that, for DM_ETH, the name of the interfaces is corrected to the fmX-macY format, that avoids the referral to the MAC block names which were incorrect for FMan v3 devices (i.e. DTSEC, TGEC) and had weird formatting (i.e. FM1@DTSEC6, FM1@TGEC1). The legacy code is left unchanged in this respect. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
1c710187 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: separate receive buffer free code Move the receive buffer free code in a separate function. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
8313cb02 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: change init_phy() param Change the init_phy() parameter to simplify the code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
6eb32a03 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: add DM ETH support Probe the FMan MACs based on the device tree while retaining the legacy code/functionality. One notable change introduced here is that, for DM_ETH, the name of the interfaces is corrected to the fmX-macY format, that avoids the referral to the MAC block names which were incorrect for FMan v3 devices (i.e. DTSEC, TGEC) and had weird formatting (i.e. FM1@DTSEC6, FM1@TGEC1). The legacy code is left unchanged in this respect. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
1c710187 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: separate receive buffer free code Move the receive buffer free code in a separate function. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
8313cb02 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: change init_phy() param Change the init_phy() parameter to simplify the code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
6eb32a03 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: add DM ETH support Probe the FMan MACs based on the device tree while retaining the legacy code/functionality. One notable change introduced here is that, for DM_ETH, the name of the interfaces is corrected to the fmX-macY format, that avoids the referral to the MAC block names which were incorrect for FMan v3 devices (i.e. DTSEC, TGEC) and had weird formatting (i.e. FM1@DTSEC6, FM1@TGEC1). The legacy code is left unchanged in this respect. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
1c710187 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: separate receive buffer free code Move the receive buffer free code in a separate function. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
8313cb02 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: change init_phy() param Change the init_phy() parameter to simplify the code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
6eb32a03 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: add DM ETH support Probe the FMan MACs based on the device tree while retaining the legacy code/functionality. One notable change introduced here is that, for DM_ETH, the name of the interfaces is corrected to the fmX-macY format, that avoids the referral to the MAC block names which were incorrect for FMan v3 devices (i.e. DTSEC, TGEC) and had weird formatting (i.e. FM1@DTSEC6, FM1@TGEC1). The legacy code is left unchanged in this respect. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
1c710187 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: separate receive buffer free code Move the receive buffer free code in a separate function. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
8313cb02 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: change init_phy() param Change the init_phy() parameter to simplify the code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
6eb32a03 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: add DM ETH support Probe the FMan MACs based on the device tree while retaining the legacy code/functionality. One notable change introduced here is that, for DM_ETH, the name of the interfaces is corrected to the fmX-macY format, that avoids the referral to the MAC block names which were incorrect for FMan v3 devices (i.e. DTSEC, TGEC) and had weird formatting (i.e. FM1@DTSEC6, FM1@TGEC1). The legacy code is left unchanged in this respect. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
1c710187 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: separate receive buffer free code Move the receive buffer free code in a separate function. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
8313cb02 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: change init_phy() param Change the init_phy() parameter to simplify the code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
6eb32a03 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: add DM ETH support Probe the FMan MACs based on the device tree while retaining the legacy code/functionality. One notable change introduced here is that, for DM_ETH, the name of the interfaces is corrected to the fmX-macY format, that avoids the referral to the MAC block names which were incorrect for FMan v3 devices (i.e. DTSEC, TGEC) and had weird formatting (i.e. FM1@DTSEC6, FM1@TGEC1). The legacy code is left unchanged in this respect. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
1c710187 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: separate receive buffer free code Move the receive buffer free code in a separate function. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
8313cb02 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: change init_phy() param Change the init_phy() parameter to simplify the code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
6eb32a03 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: add DM ETH support Probe the FMan MACs based on the device tree while retaining the legacy code/functionality. One notable change introduced here is that, for DM_ETH, the name of the interfaces is corrected to the fmX-macY format, that avoids the referral to the MAC block names which were incorrect for FMan v3 devices (i.e. DTSEC, TGEC) and had weird formatting (i.e. FM1@DTSEC6, FM1@TGEC1). The legacy code is left unchanged in this respect. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
1c710187 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: separate receive buffer free code Move the receive buffer free code in a separate function. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
8313cb02 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: change init_phy() param Change the init_phy() parameter to simplify the code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
6eb32a03 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: add DM ETH support Probe the FMan MACs based on the device tree while retaining the legacy code/functionality. One notable change introduced here is that, for DM_ETH, the name of the interfaces is corrected to the fmX-macY format, that avoids the referral to the MAC block names which were incorrect for FMan v3 devices (i.e. DTSEC, TGEC) and had weird formatting (i.e. FM1@DTSEC6, FM1@TGEC1). The legacy code is left unchanged in this respect. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
1c710187 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: separate receive buffer free code Move the receive buffer free code in a separate function. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
8313cb02 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: change init_phy() param Change the init_phy() parameter to simplify the code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
6eb32a03 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: add DM ETH support Probe the FMan MACs based on the device tree while retaining the legacy code/functionality. One notable change introduced here is that, for DM_ETH, the name of the interfaces is corrected to the fmX-macY format, that avoids the referral to the MAC block names which were incorrect for FMan v3 devices (i.e. DTSEC, TGEC) and had weird formatting (i.e. FM1@DTSEC6, FM1@TGEC1). The legacy code is left unchanged in this respect. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
1c710187 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: separate receive buffer free code Move the receive buffer free code in a separate function. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
8313cb02 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: change init_phy() param Change the init_phy() parameter to simplify the code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
6eb32a03 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: add DM ETH support Probe the FMan MACs based on the device tree while retaining the legacy code/functionality. One notable change introduced here is that, for DM_ETH, the name of the interfaces is corrected to the fmX-macY format, that avoids the referral to the MAC block names which were incorrect for FMan v3 devices (i.e. DTSEC, TGEC) and had weird formatting (i.e. FM1@DTSEC6, FM1@TGEC1). The legacy code is left unchanged in this respect. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
1c710187 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: separate receive buffer free code Move the receive buffer free code in a separate function. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
8313cb02 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: change init_phy() param Change the init_phy() parameter to simplify the code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
6eb32a03 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: add DM ETH support Probe the FMan MACs based on the device tree while retaining the legacy code/functionality. One notable change introduced here is that, for DM_ETH, the name of the interfaces is corrected to the fmX-macY format, that avoids the referral to the MAC block names which were incorrect for FMan v3 devices (i.e. DTSEC, TGEC) and had weird formatting (i.e. FM1@DTSEC6, FM1@TGEC1). The legacy code is left unchanged in this respect. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
1c710187 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: separate receive buffer free code Move the receive buffer free code in a separate function. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
8313cb02 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: change init_phy() param Change the init_phy() parameter to simplify the code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
6eb32a03 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: add DM ETH support Probe the FMan MACs based on the device tree while retaining the legacy code/functionality. One notable change introduced here is that, for DM_ETH, the name of the interfaces is corrected to the fmX-macY format, that avoids the referral to the MAC block names which were incorrect for FMan v3 devices (i.e. DTSEC, TGEC) and had weird formatting (i.e. FM1@DTSEC6, FM1@TGEC1). The legacy code is left unchanged in this respect. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
1c710187 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: separate receive buffer free code Move the receive buffer free code in a separate function. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
8313cb02 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: change init_phy() param Change the init_phy() parameter to simplify the code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
6eb32a03 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: add DM ETH support Probe the FMan MACs based on the device tree while retaining the legacy code/functionality. One notable change introduced here is that, for DM_ETH, the name of the interfaces is corrected to the fmX-macY format, that avoids the referral to the MAC block names which were incorrect for FMan v3 devices (i.e. DTSEC, TGEC) and had weird formatting (i.e. FM1@DTSEC6, FM1@TGEC1). The legacy code is left unchanged in this respect. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
1c710187 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: separate receive buffer free code Move the receive buffer free code in a separate function. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
8313cb02 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: change init_phy() param Change the init_phy() parameter to simplify the code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
6eb32a03 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: add DM ETH support Probe the FMan MACs based on the device tree while retaining the legacy code/functionality. One notable change introduced here is that, for DM_ETH, the name of the interfaces is corrected to the fmX-macY format, that avoids the referral to the MAC block names which were incorrect for FMan v3 devices (i.e. DTSEC, TGEC) and had weird formatting (i.e. FM1@DTSEC6, FM1@TGEC1). The legacy code is left unchanged in this respect. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
1c710187 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: separate receive buffer free code Move the receive buffer free code in a separate function. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
8313cb02 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: change init_phy() param Change the init_phy() parameter to simplify the code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
6eb32a03 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: add DM ETH support Probe the FMan MACs based on the device tree while retaining the legacy code/functionality. One notable change introduced here is that, for DM_ETH, the name of the interfaces is corrected to the fmX-macY format, that avoids the referral to the MAC block names which were incorrect for FMan v3 devices (i.e. DTSEC, TGEC) and had weird formatting (i.e. FM1@DTSEC6, FM1@TGEC1). The legacy code is left unchanged in this respect. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
1c710187 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: separate receive buffer free code Move the receive buffer free code in a separate function. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
8313cb02 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: change init_phy() param Change the init_phy() parameter to simplify the code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
6eb32a03 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: add DM ETH support Probe the FMan MACs based on the device tree while retaining the legacy code/functionality. One notable change introduced here is that, for DM_ETH, the name of the interfaces is corrected to the fmX-macY format, that avoids the referral to the MAC block names which were incorrect for FMan v3 devices (i.e. DTSEC, TGEC) and had weird formatting (i.e. FM1@DTSEC6, FM1@TGEC1). The legacy code is left unchanged in this respect. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
1c710187 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: separate receive buffer free code Move the receive buffer free code in a separate function. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
8313cb02 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: change init_phy() param Change the init_phy() parameter to simplify the code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
6eb32a03 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: add DM ETH support Probe the FMan MACs based on the device tree while retaining the legacy code/functionality. One notable change introduced here is that, for DM_ETH, the name of the interfaces is corrected to the fmX-macY format, that avoids the referral to the MAC block names which were incorrect for FMan v3 devices (i.e. DTSEC, TGEC) and had weird formatting (i.e. FM1@DTSEC6, FM1@TGEC1). The legacy code is left unchanged in this respect. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
1c710187 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: separate receive buffer free code Move the receive buffer free code in a separate function. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
8313cb02 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: change init_phy() param Change the init_phy() parameter to simplify the code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
6eb32a03 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: add DM ETH support Probe the FMan MACs based on the device tree while retaining the legacy code/functionality. One notable change introduced here is that, for DM_ETH, the name of the interfaces is corrected to the fmX-macY format, that avoids the referral to the MAC block names which were incorrect for FMan v3 devices (i.e. DTSEC, TGEC) and had weird formatting (i.e. FM1@DTSEC6, FM1@TGEC1). The legacy code is left unchanged in this respect. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
1c710187 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: separate receive buffer free code Move the receive buffer free code in a separate function. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
8313cb02 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: change init_phy() param Change the init_phy() parameter to simplify the code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
6eb32a03 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: add DM ETH support Probe the FMan MACs based on the device tree while retaining the legacy code/functionality. One notable change introduced here is that, for DM_ETH, the name of the interfaces is corrected to the fmX-macY format, that avoids the referral to the MAC block names which were incorrect for FMan v3 devices (i.e. DTSEC, TGEC) and had weird formatting (i.e. FM1@DTSEC6, FM1@TGEC1). The legacy code is left unchanged in this respect. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
1c710187 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: separate receive buffer free code Move the receive buffer free code in a separate function. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
8313cb02 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: change init_phy() param Change the init_phy() parameter to simplify the code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
6eb32a03 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: add DM ETH support Probe the FMan MACs based on the device tree while retaining the legacy code/functionality. One notable change introduced here is that, for DM_ETH, the name of the interfaces is corrected to the fmX-macY format, that avoids the referral to the MAC block names which were incorrect for FMan v3 devices (i.e. DTSEC, TGEC) and had weird formatting (i.e. FM1@DTSEC6, FM1@TGEC1). The legacy code is left unchanged in this respect. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
1c710187 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: separate receive buffer free code Move the receive buffer free code in a separate function. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
8313cb02 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: change init_phy() param Change the init_phy() parameter to simplify the code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
6eb32a03 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: add DM ETH support Probe the FMan MACs based on the device tree while retaining the legacy code/functionality. One notable change introduced here is that, for DM_ETH, the name of the interfaces is corrected to the fmX-macY format, that avoids the referral to the MAC block names which were incorrect for FMan v3 devices (i.e. DTSEC, TGEC) and had weird formatting (i.e. FM1@DTSEC6, FM1@TGEC1). The legacy code is left unchanged in this respect. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
1c710187 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: separate receive buffer free code Move the receive buffer free code in a separate function. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
8313cb02 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: change init_phy() param Change the init_phy() parameter to simplify the code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
6eb32a03 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: add DM ETH support Probe the FMan MACs based on the device tree while retaining the legacy code/functionality. One notable change introduced here is that, for DM_ETH, the name of the interfaces is corrected to the fmX-macY format, that avoids the referral to the MAC block names which were incorrect for FMan v3 devices (i.e. DTSEC, TGEC) and had weird formatting (i.e. FM1@DTSEC6, FM1@TGEC1). The legacy code is left unchanged in this respect. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
1c710187 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: separate receive buffer free code Move the receive buffer free code in a separate function. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
8313cb02 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: change init_phy() param Change the init_phy() parameter to simplify the code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
6eb32a03 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: add DM ETH support Probe the FMan MACs based on the device tree while retaining the legacy code/functionality. One notable change introduced here is that, for DM_ETH, the name of the interfaces is corrected to the fmX-macY format, that avoids the referral to the MAC block names which were incorrect for FMan v3 devices (i.e. DTSEC, TGEC) and had weird formatting (i.e. FM1@DTSEC6, FM1@TGEC1). The legacy code is left unchanged in this respect. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
1c710187 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: separate receive buffer free code Move the receive buffer free code in a separate function. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
8313cb02 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: change init_phy() param Change the init_phy() parameter to simplify the code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
6eb32a03 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: add DM ETH support Probe the FMan MACs based on the device tree while retaining the legacy code/functionality. One notable change introduced here is that, for DM_ETH, the name of the interfaces is corrected to the fmX-macY format, that avoids the referral to the MAC block names which were incorrect for FMan v3 devices (i.e. DTSEC, TGEC) and had weird formatting (i.e. FM1@DTSEC6, FM1@TGEC1). The legacy code is left unchanged in this respect. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
1c710187 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: separate receive buffer free code Move the receive buffer free code in a separate function. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
8313cb02 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: change init_phy() param Change the init_phy() parameter to simplify the code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
6eb32a03 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: add DM ETH support Probe the FMan MACs based on the device tree while retaining the legacy code/functionality. One notable change introduced here is that, for DM_ETH, the name of the interfaces is corrected to the fmX-macY format, that avoids the referral to the MAC block names which were incorrect for FMan v3 devices (i.e. DTSEC, TGEC) and had weird formatting (i.e. FM1@DTSEC6, FM1@TGEC1). The legacy code is left unchanged in this respect. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
1c710187 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: separate receive buffer free code Move the receive buffer free code in a separate function. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
8313cb02 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: change init_phy() param Change the init_phy() parameter to simplify the code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
6eb32a03 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: add DM ETH support Probe the FMan MACs based on the device tree while retaining the legacy code/functionality. One notable change introduced here is that, for DM_ETH, the name of the interfaces is corrected to the fmX-macY format, that avoids the referral to the MAC block names which were incorrect for FMan v3 devices (i.e. DTSEC, TGEC) and had weird formatting (i.e. FM1@DTSEC6, FM1@TGEC1). The legacy code is left unchanged in this respect. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
1c710187 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: separate receive buffer free code Move the receive buffer free code in a separate function. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
8313cb02 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: change init_phy() param Change the init_phy() parameter to simplify the code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
6eb32a03 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: add DM ETH support Probe the FMan MACs based on the device tree while retaining the legacy code/functionality. One notable change introduced here is that, for DM_ETH, the name of the interfaces is corrected to the fmX-macY format, that avoids the referral to the MAC block names which were incorrect for FMan v3 devices (i.e. DTSEC, TGEC) and had weird formatting (i.e. FM1@DTSEC6, FM1@TGEC1). The legacy code is left unchanged in this respect. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
1c710187 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: separate receive buffer free code Move the receive buffer free code in a separate function. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
8313cb02 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: change init_phy() param Change the init_phy() parameter to simplify the code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
6eb32a03 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: add DM ETH support Probe the FMan MACs based on the device tree while retaining the legacy code/functionality. One notable change introduced here is that, for DM_ETH, the name of the interfaces is corrected to the fmX-macY format, that avoids the referral to the MAC block names which were incorrect for FMan v3 devices (i.e. DTSEC, TGEC) and had weird formatting (i.e. FM1@DTSEC6, FM1@TGEC1). The legacy code is left unchanged in this respect. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
1c710187 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: separate receive buffer free code Move the receive buffer free code in a separate function. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
8313cb02 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: change init_phy() param Change the init_phy() parameter to simplify the code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
6eb32a03 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: add DM ETH support Probe the FMan MACs based on the device tree while retaining the legacy code/functionality. One notable change introduced here is that, for DM_ETH, the name of the interfaces is corrected to the fmX-macY format, that avoids the referral to the MAC block names which were incorrect for FMan v3 devices (i.e. DTSEC, TGEC) and had weird formatting (i.e. FM1@DTSEC6, FM1@TGEC1). The legacy code is left unchanged in this respect. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
1c710187 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: separate receive buffer free code Move the receive buffer free code in a separate function. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
8313cb02 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: change init_phy() param Change the init_phy() parameter to simplify the code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
6eb32a03 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: add DM ETH support Probe the FMan MACs based on the device tree while retaining the legacy code/functionality. One notable change introduced here is that, for DM_ETH, the name of the interfaces is corrected to the fmX-macY format, that avoids the referral to the MAC block names which were incorrect for FMan v3 devices (i.e. DTSEC, TGEC) and had weird formatting (i.e. FM1@DTSEC6, FM1@TGEC1). The legacy code is left unchanged in this respect. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
1c710187 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: separate receive buffer free code Move the receive buffer free code in a separate function. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
8313cb02 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: change init_phy() param Change the init_phy() parameter to simplify the code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
6eb32a03 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: add DM ETH support Probe the FMan MACs based on the device tree while retaining the legacy code/functionality. One notable change introduced here is that, for DM_ETH, the name of the interfaces is corrected to the fmX-macY format, that avoids the referral to the MAC block names which were incorrect for FMan v3 devices (i.e. DTSEC, TGEC) and had weird formatting (i.e. FM1@DTSEC6, FM1@TGEC1). The legacy code is left unchanged in this respect. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
1c710187 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: separate receive buffer free code Move the receive buffer free code in a separate function. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
8313cb02 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: change init_phy() param Change the init_phy() parameter to simplify the code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
6eb32a03 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: add DM ETH support Probe the FMan MACs based on the device tree while retaining the legacy code/functionality. One notable change introduced here is that, for DM_ETH, the name of the interfaces is corrected to the fmX-macY format, that avoids the referral to the MAC block names which were incorrect for FMan v3 devices (i.e. DTSEC, TGEC) and had weird formatting (i.e. FM1@DTSEC6, FM1@TGEC1). The legacy code is left unchanged in this respect. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
1c710187 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: separate receive buffer free code Move the receive buffer free code in a separate function. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
8313cb02 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: change init_phy() param Change the init_phy() parameter to simplify the code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
6eb32a03 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: add DM ETH support Probe the FMan MACs based on the device tree while retaining the legacy code/functionality. One notable change introduced here is that, for DM_ETH, the name of the interfaces is corrected to the fmX-macY format, that avoids the referral to the MAC block names which were incorrect for FMan v3 devices (i.e. DTSEC, TGEC) and had weird formatting (i.e. FM1@DTSEC6, FM1@TGEC1). The legacy code is left unchanged in this respect. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
1c710187 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: separate receive buffer free code Move the receive buffer free code in a separate function. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
8313cb02 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: change init_phy() param Change the init_phy() parameter to simplify the code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
6eb32a03 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: add DM ETH support Probe the FMan MACs based on the device tree while retaining the legacy code/functionality. One notable change introduced here is that, for DM_ETH, the name of the interfaces is corrected to the fmX-macY format, that avoids the referral to the MAC block names which were incorrect for FMan v3 devices (i.e. DTSEC, TGEC) and had weird formatting (i.e. FM1@DTSEC6, FM1@TGEC1). The legacy code is left unchanged in this respect. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
1c710187 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: separate receive buffer free code Move the receive buffer free code in a separate function. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
8313cb02 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: change init_phy() param Change the init_phy() parameter to simplify the code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
6eb32a03 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: add DM ETH support Probe the FMan MACs based on the device tree while retaining the legacy code/functionality. One notable change introduced here is that, for DM_ETH, the name of the interfaces is corrected to the fmX-macY format, that avoids the referral to the MAC block names which were incorrect for FMan v3 devices (i.e. DTSEC, TGEC) and had weird formatting (i.e. FM1@DTSEC6, FM1@TGEC1). The legacy code is left unchanged in this respect. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
1c710187 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: separate receive buffer free code Move the receive buffer free code in a separate function. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
8313cb02 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: change init_phy() param Change the init_phy() parameter to simplify the code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
6eb32a03 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: add DM ETH support Probe the FMan MACs based on the device tree while retaining the legacy code/functionality. One notable change introduced here is that, for DM_ETH, the name of the interfaces is corrected to the fmX-macY format, that avoids the referral to the MAC block names which were incorrect for FMan v3 devices (i.e. DTSEC, TGEC) and had weird formatting (i.e. FM1@DTSEC6, FM1@TGEC1). The legacy code is left unchanged in this respect. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
1c710187 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: separate receive buffer free code Move the receive buffer free code in a separate function. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
8313cb02 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: change init_phy() param Change the init_phy() parameter to simplify the code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
6eb32a03 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: add DM ETH support Probe the FMan MACs based on the device tree while retaining the legacy code/functionality. One notable change introduced here is that, for DM_ETH, the name of the interfaces is corrected to the fmX-macY format, that avoids the referral to the MAC block names which were incorrect for FMan v3 devices (i.e. DTSEC, TGEC) and had weird formatting (i.e. FM1@DTSEC6, FM1@TGEC1). The legacy code is left unchanged in this respect. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
1c710187 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: separate receive buffer free code Move the receive buffer free code in a separate function. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
8313cb02 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: change init_phy() param Change the init_phy() parameter to simplify the code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
6eb32a03 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: add DM ETH support Probe the FMan MACs based on the device tree while retaining the legacy code/functionality. One notable change introduced here is that, for DM_ETH, the name of the interfaces is corrected to the fmX-macY format, that avoids the referral to the MAC block names which were incorrect for FMan v3 devices (i.e. DTSEC, TGEC) and had weird formatting (i.e. FM1@DTSEC6, FM1@TGEC1). The legacy code is left unchanged in this respect. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
1c710187 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: separate receive buffer free code Move the receive buffer free code in a separate function. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
8313cb02 |
|
23-Apr-2020 |
Madalin Bucur <madalin.bucur@oss.nxp.com> |
driver: net: fm: change init_phy() param Change the init_phy() parameter to simplify the code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
|
#
83d290c5 |
|
06-May-2018 |
Tom Rini <trini@konsulko.com> |
SPDX: Convert all of our single license tags to Linux Kernel style When U-Boot started using SPDX tags we were among the early adopters and there weren't a lot of other examples to borrow from. So we picked the area of the file that usually had a full license text and replaced it with an appropriate SPDX-License-Identifier: entry. Since then, the Linux Kernel has adopted SPDX tags and they place it as the very first line in a file (except where shebangs are used, then it's second line) and with slightly different comment styles than us. In part due to community overlap, in part due to better tag visibility and in part for other minor reasons, switch over to that style. This commit changes all instances where we have a single declared license in the tag as both the before and after are identical in tag contents. There's also a few places where I found we did not have a tag and have introduced one. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
bead0880 |
|
14-Nov-2016 |
shaohui xie <shaohui.xie@nxp.com> |
net: fman: fix 2.5G SGMII settings The settings for 2.5G SGMII are wrong, which the 2.5G case is missed in set_if_mode(), and the serdes PCS configuration are wrong, this patch uses the correct settings took from Linux. Signed-off-by: Shaohui Xie <Shaohui.Xie@nxp.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
|
#
bc24611c |
|
26-Oct-2015 |
Shaohui Xie <Shaohui.Xie@freescale.com> |
net/fm: Add QSGMII PCS init QSGMII PCS needed to be programmed same as SGMII PCS, and there are four ports in QSGMII PCS, port 0, 1, 2, 3, all the four ports shared port 0's MDIO controller, so when programming port 0, we continue to program other three ports. Signed-off-by: Shaohui Xie <Shaohui.Xie@freescale.com> Signed-off-by: Mingkai Hu <Mingkai.Hu@freescale.com> Signed-off-by: Gong Qianyu <Qianyu.Gong@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
|
#
8225b2fd |
|
26-Oct-2015 |
Shaohui Xie <Shaohui.Xie@freescale.com> |
net: Move some header files to include/ The fsl_dtsec.h & fsl_tgec.h & fsl_fman.h can be shared on both ARM and PPC, move it out of ppc to include/, and change the path in drivers accordingly. Signed-off-by: Shaohui Xie <Shaohui.Xie@freescale.com> Signed-off-by: Gong Qianyu <Qianyu.Gong@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
|
#
29d8c814 |
|
26-Oct-2015 |
Shaohui Xie <Shaohui.Xie@freescale.com> |
net: fm: bug fix when CONFIG_PHYLIB not defined codes related to phylib operations should be wrapped by CONFIG_PHYLIB. Signed-off-by: Shaohui Xie <Shaohui.Xie@freescale.com> Signed-off-by: Gong Qianyu <Qianyu.Gong@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
|
#
0f2cb9f5 |
|
26-Oct-2015 |
Hou Zhiqiang <B48286@freescale.com> |
net/fm: Make the return value logic consistent with convention In convention, the '0' is a normal return value indicating there isn't an error. While some functions of FMan IM driver treat '0' as an error return value. Signed-off-by: Hou Zhiqiang <B48286@freescale.com> Signed-off-by: Gong Qianyu <Qianyu.Gong@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
|
#
9fc29db1 |
|
26-Oct-2015 |
Hou Zhiqiang <B48286@freescale.com> |
net/fm: Add support for 64-bit platforms The FMan IM driver is developed for 32-bit platfroms and isn't friendly to 64-bit platforms, so do the minimal refactor: 1. Refine the MURAM management and access. 2. Correct the initialization and operations for QDs and BDs. Signed-off-by: Hou Zhiqiang <B48286@freescale.com> Signed-off-by: Gong Qianyu <Qianyu.Gong@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
|
#
648bde6d |
|
26-Oct-2015 |
Hou Zhiqiang <B48286@freescale.com> |
net/fm: Fix the endian issue to support both endianness platforms The Frame Manager(FMan) is a big-endian peripheral, so the registers, internal MURAM and BDs, which are allocated in main memory and used to communication between core and FMan, should be accessed in big-endian. The big-endian platforms can access them directly as the code implemented so far, while for the little-endian platforms it need to swap the byte-order. Signed-off-by: Hou Zhiqiang <B48286@freescale.com> Signed-off-by: Shaohui Xie <Shaohui.Xie@freescale.com> Signed-off-by: Mingkai Hu <Mingkai.Hu@freescale.com> Signed-off-by: Gong Qianyu <Qianyu.Gong@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
|
#
466f775e |
|
10-Jul-2015 |
Daniel Inderbitzin <daniel.inderbitzin@crypto.ch> |
qoriq eth.c bugfix: handle received corrupted frames correctly The rxbd is not correctly handled in case of a frame physical error (FPE) or frame size error (FSE). The rxbd must be cleared and advanced in case of an error to avoid receive stall. Signed-off-by: Daniel Inderbitzin <daniel.inderbitzin@gmail.com>
|
#
cd348efa |
|
20-Mar-2015 |
Shaohui Xie <Shaohui.Xie@freescale.com> |
net/memac_phy: reuse driver for little endian SoCs The memac for PHY management on little endian SoCs is similar on big endian SoCs, so we modify the driver by using I/O accessor function to handle the endianness, so the driver can be reused on little endian SoCs, we introduce CONFIG_SYS_MEMAC_LITTLE_ENDIAN for little endian SoCs, if the CONFIG_SYS_MEMAC_LITTLE_ENDIAN is defined, the I/O access is little endian, if not, the I/O access is big endian. Move fsl_memac.h out of powerpc include. Signed-off-by: Shaohui Xie <Shaohui.Xie@freescale.com> Signed-off-by: York Sun <yorksun@freescale.com>
|
#
1fd92db8 |
|
08-Apr-2015 |
Joe Hershberger <joe.hershberger@ni.com> |
net: cosmetic: Fix var naming net <-> eth drivers Update the naming convention used in the network stack functions and variables that Ethernet drivers use to interact with it. This cleans up the temporary hacks that were added to this interface along with the DM support. This patch has a few remaining checkpatch.pl failures that would be out of the scope of this patch to fix (drivers that are in gross violation of checkpatch.pl). Signed-off-by: Joe Hershberger <joe.hershberger@ni.com> Acked-by: Simon Glass <sjg@chromium.org>
|
#
6798c324 |
|
12-Jan-2015 |
Codrin Ciubotariu <codrin.ciubotariu@freescale.com> |
net/fm: Fix error when FMAN MAC has no PHY U-boot assumes that all FMAN ports have a PHY. Some SoCs (like T1040) have fixed links. This means that the ports are connected MAC to MAc and there is no Ethernet PHY attatched. This patch initializes a FMAN MAC even if it doesn't have a PHY attached. Signed-off-by: Codrin Ciubotariu <codrin.ciubotariu@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
|
#
cc19c25e |
|
24-Nov-2014 |
Shengzhou Liu <Shengzhou.Liu@freescale.com> |
net/fman: update 10GEC to fit new SoC fm_standard_init() initializes each 10G port by FM_TGEC_INFO_INITIALIZER. but it needs different implementation of FM_TGEC_INFO_INITIALIZER on different SoCs. on SoCs earlier(e.g. T4240, T2080), the notation between 10GEC and MAC as below: 10GEC1->MAC9, 10GEC2->MAC10, 10GEC3->MAC1, 10GEC4->MAC2 on SoCs later(e.g. T1024, etc), the notation between 10GEC and MAC as below: 10GEC1->MAC1, 10GEC2->MAC2 so we introduce CONFIG_FSL_FM_10GEC_REGULAR_NOTATION to fit the new SoCs on which 10GEC enumeration is consistent with MAC enumeration. Signed-off-by: Shengzhou Liu <Shengzhou.Liu@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
|
#
c35f8693 |
|
23-Oct-2014 |
Shengzhou Liu <Shengzhou.Liu@freescale.com> |
net/fm: add 2.5G SGMII support As auto-negotiation is not supported for 2.5G SGMII, we need to add a new type PHY_INTERFACE_MODE_SGMII_2500 to differentiate SGMII-1G and SGMII-2.5G with different setting for auto-negotiation. Signed-off-by: Shaohui Xie <Shaohui.Xie@freescale.com> Signed-off-by: Shengzhou Liu <Shengzhou.Liu@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
|
#
82a55c1e |
|
22-Nov-2013 |
Shengzhou Liu <Shengzhou.Liu@freescale.com> |
net/fman: Add support for 10GEC3 and 10GEC4 There are more than two 10GEC in single FMAN in some SoCs(e.g. T2080). This patch adds support for 10GEC3 and 10GEC4. Signed-off-by: Shengzhou Liu <Shengzhou.Liu@freescale.com>
|
#
1c68d01e |
|
19-Aug-2013 |
Shaohui Xie <Shaohui.Xie@freescale.com> |
powerpc/t4240: add QSGMII interface support Also some fix for QSGMII. 1. fix QSGMII configure of Serdes2. 2. fix PHY address of QSGMII MAC9 & MAC10 for each FMAN. 3. fix dtb for QSGMII interface. Signed-off-by: Shaohui Xie <Shaohui.Xie@freescale.com> Acked-by: York Sun <yorksun@freescale.com>
|
#
1a459660 |
|
08-Jul-2013 |
Wolfgang Denk <wd@denx.de> |
Add GPL-2.0+ SPDX-License-Identifier to source files Signed-off-by: Wolfgang Denk <wd@denx.de> [trini: Fixup common/cmd_io.c] Signed-off-by: Tom Rini <trini@ti.com>
|
#
944b6ccf |
|
25-Mar-2013 |
Shaohui Xie <Shaohui.Xie@freescale.com> |
Fman/t4240: some fix for 10G XAUI 1. fix 10G mac offset by plus 8; 2. add second 10G port info for FM1 & FM2 when init ethernet info; 3. fix 10G lanes name to match lane protocol table; Signed-off-by: Shaohui Xie <Shaohui.Xie@freescale.com> Signed-off-by: Roy Zang <tie-fei.zang@freescale.com> Signed-off-by: Andy Fleming <afleming@freescale.com>
|
#
960d70c6 |
|
29-Oct-2012 |
Kim Phillips <kim.phillips@freescale.com> |
drivers/net/: sparse fixes phy.c:46:5: warning: symbol 'genphy_config_advert' was not declared. Should it be static? phy.c:121:5: warning: symbol 'genphy_setup_forced' was not declared. Should it be static? phy.c:468:5: warning: symbol 'phy_probe' was not declared. Should it be static? phy.c:491:19: warning: symbol 'get_phy_driver' was not declared. Should it be static? phy.c:508:19: warning: symbol 'phy_device_create' was not declared. Should it be static? phy.c:552:5: warning: symbol 'get_phy_id' was not declared. Should it be static? phy.c:584:19: warning: symbol 'get_phy_device' was not declared. Should it be sta vitesse.c:126:5: warning: symbol 'vsc8601_config' was not declared. Should it be static? vsc7385.c:33:5: warning: symbol 'vsc7385_upload_firmware' was not declared. Should it be static? tgec_phy.c:33:5: warning: symbol 'tgec_mdio_write' was not declared. Should it be static? tgec_phy.c:75:5: warning: symbol 'tgec_mdio_read' was not declared. Should it be static? tgec_phy.c:117:5: warning: symbol 'tgec_mdio_reset' was not declared. Should it be static? eth.c:48:6: warning: symbol 'dtsec_configure_serdes' was not declared. Should it be static? p4080.c:26:5: warning: symbol 'port_to_devdisr' was not declared. Should it be static? Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
|
#
1f3bd3e2 |
|
11-Oct-2012 |
shaohui xie <Shaohui.Xie@freescale.com> |
powerpc/fm: fix TBI PHY address settings TBI PHY address (TBIPA) register is set in general frame manager phy init funciton dtsec_init_phy() in drivers/net/fm/eth.c, and it is supposed to set TBIPA on FM1@DTSEC1 in case of FM1@DTSEC1 isn't used directly, which provides MDIO for other ports. So following code is wrong in case of FM2, which has a different mac base. struct dtsec *regs = (struct dtsec *)fm_eth->mac->base; /* Assign a Physical address to the TBI */ out_be32(®s->tbipa, CONFIG_SYS_TBIPA_VALUE); Signed-off-by: Shaohui Xie <Shaohui.Xie@freescale.com> Signed-off-by: Andy Fleming <afleming@freescale.com>
|
#
111fd19e |
|
08-Oct-2012 |
Roy Zang <tie-fei.zang@freescale.com> |
fm/mEMAC: add mEMAC frame work The multirate ethernet media access controller (mEMAC) interfaces to 10Gbps and below Ethernet/IEEE 802.3 networks via either RGMII/RMII interfaces or XAUI/XFI/SGMII/QSGMII using the high-speed SerDes interface. Signed-off-by: Sandeep Singh <Sandeep@freescale.com> Signed-off-by: Poonam Aggrwal <poonam.aggrwal@freescale.com> Signed-off-by: Roy Zang <tie-fei.zang@freescale.com> Signed-off-by: Andy Fleming <afleming@freescale.com>
|
#
11af8d65 |
|
09-Jul-2012 |
Timur Tabi <timur@freescale.com> |
net: abort network initialization if the PHY driver fails Now that phy_startup() can return an actual error code, check for that error code and abort network initialization if the PHY fails. Signed-off-by: Timur Tabi <timur@freescale.com> Acked-by: Nobuhiro Iwamamatsu <nobuhiro.iwamatsu.yj@renesas.com> (sh_eth part) Acked-by: Stephan Linz <linz@li-pro.net> (Xilinx part, xilinx_axi_emac and xilinx_ll_temac) Reviewed-by: Marek Vasut <marex@denx.de> (FEC part)
|
#
e9df2018 |
|
22-May-2012 |
Joe Hershberger <joe.hershberger@ni.com> |
drivers/net/fm/eth.c: Fix compile warning Fix this: eth.c: In function 'fm_eth_initialize': eth.c:651:12: warning: assignment from incompatible pointer type Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
|
#
30381716 |
|
04-Oct-2011 |
Timur Tabi <timur@freescale.com> |
powerpc/85xx: fix null pointer dereference when init the SGMII TBI PHY Function dtsec_configure_serdes() needs to know where the TBI PHY registers are in order to configure SGMII for proper SerDes operation. During SGMII initialzation, fm_eth_init_mac() passing NULL for 'phyregs' when it called init_dtsec(), because it was believed that phyregs was not used. In fact, it is used by dtsec_configure_serdes() to configure the TBI PHY registers. We also need to define the PHY registers in struct fm_mdio. Signed-off-by: Timur Tabi <timur@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
|
#
c916d7c9 |
|
13-Apr-2011 |
Kumar Gala <galak@kernel.crashing.org> |
powerpc/85xx: Add support for FMan ethernet in Independent mode The Frame Manager (FMan) on QorIQ SoCs with DPAA (datapath acceleration architecture) is the ethernet contoller block. Normally it is utilized via Queue Manager (Qman) and Buffer Manager (Bman). However for boot usage the FMan supports a mode similar to QE or CPM ethernet collers called Independent mode. Additionally the FMan block supports multiple 1g and 10g interfaces as a single entity in the system rather than each controller being managed uniquely. This means we have to initialize all of Fman regardless of the number of interfaces we utilize. Different SoCs support different combinations of the number of FMan as well as the number of 1g & 10g interfaces support per Fman. We add support for the following SoCs: * P1023 - 1 Fman, 2x1g * P4080 - 2 Fman, each Fman has 4x1g and 1x10g * P204x/P3041/P5020 - 1 Fman, 5x1g, 1x10g Signed-off-by: Dave Liu <daveliu@freescale.com> Signed-off-by: Andy Fleming <afleming@freescale.com> Signed-off-by: Timur Tabi <timur@freescale.com> Signed-off-by: Roy Zang <tie-fei.zang@freescale.com> Signed-off-by: Dai Haruki <dai.haruki@freescale.com> Signed-off-by: Kim Phillips <kim.phillips@freescale.com> Signed-off-by: Ioana Radulescu <ruxandra.radulescu@freescale.com> Signed-off-by: Lei Xu <B33228@freescale.com> Signed-off-by: Mingkai Hu <Mingkai.hu@freescale.com> Signed-off-by: Scott Wood <scottwood@freescale.com> Signed-off-by: Shaohui Xie <b21989@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
|