Revert "Merge patch series "arm: dts: am62-beagleplay: Fix Beagleplay Ethernet""

When bringing in the series 'arm: dts: am62-beagleplay: Fix Beagleplay
Ethernet"' I failed to notice that b4 noticed it was based on next and
so took that as the base commit and merged that part of next to master.

This reverts commit c8ffd1356d42223cbb8c86280a083cc3c93e6426, reversing
changes made to 2ee6f3a5f7550de3599faef9704e166e5dcace35.

Reported-by: Jonas Karlman <jonas@kwiboo.se>
Signed-off-by: Tom Rini <trini@konsulko.com>

mtd: Remove <common.h> and add needed includes

Remove <common.h> from this driver directory and when needed
add missing include files directly.

Reviewed-by: William Zhang <william.zhang@broadcom.com>
Signed-off-by: Tom Rini <trini@konsulko.com>

mtd: nand: arasan: Fix the crash caused by use after free

The below exception observed on QEMU, as it doesn't support
NAND controller.

"Synchronous Abort" handler, esr 0x96000005, far 0x17acfc878
elr: 000000000803ad40 lr : 000000000805f438 (reloc)
elr: 000000007fcb4d40 lr : 000000007fcd9438
x0 : 000000007bbfc880 x1 : 00000000ff100000
x2 : 000000007fcf059c x3 : 000000007bbfc870
x4 : 000000007fd9a388 x5 : 000000017acfc870
x6 : 0000000000000000 x7 : 000000007bbfd0e0
x8 : 0000000000003dd4 x9 : 000000007bbeec0c
x10: 0000000000000001 x11: 0000000000003f8c
x12: 000000007bbeecfc x13: 000000007bbeeeb0
x14: 000000007bbeeeb0 x15: 000000007bbee474
x16: 000000007fcef18c x17: 0000000000000000
x18: 000000007bbf9d70 x19: 000000007bbfc888
x20: 000000007bbfc870 x21: 000000007fd68ddb
x22: 00000000ffffffed x23: 000000007bbfc878
x24: 0000000000000000 x25: 0000000000000000
x26: 0000000000000000 x27: 0000000000000000
x28: 0000000000000000 x29: 000000007bbeed10

Code: 927ff8c1 924000c6 8b010065 f9400887 (f94004a2)
Resetting CPU ...

The crash is caused by the use after free.
Updating the correct return codes rather than hardcoding.
Fixes: 3dd0f8cccd6d ("mtd: nand: Remove hardcoded base address of nand")

Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com>
Link: https://lore.kernel.org/r/20240306033404.18537-1-venkatesh.abbarapu@amd.com
Signed-off-by: Michal Simek <michal.simek@amd.com>

mtd: nand: arasan: Print warning for unsupported ecc modes

Currently only hw ecc is supported in U-Boot. If any other ecc mode is
given in DT, it simply through an error. So better print
what is being done.

Revert this patch once soft ecc support is fixed in future.

Signed-off-by: Ashok Reddy Soma <ashok.reddy.soma@amd.com>
Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com>
Link: https://lore.kernel.org/r/20240306032703.17508-1-venkatesh.abbarapu@amd.com
Signed-off-by: Michal Simek <michal.simek@amd.com>

common: Drop linux/printk.h from common header

This old patch was marked as deferred. Bring it back to life, to continue
towards the removal of common.h

Move this out of the common header and include it only where needed.

Signed-off-by: Simon Glass <sjg@chromium.org>

drivers: use dev_read_addr_ptr when cast to pointer

The fdt_addr_t and phys_addr_t size have been decoupled. A 32bit CPU
can expect 64-bit data from the device tree parser, so use
dev_read_addr_ptr instead of the dev_read_addr function in the
various files in the drivers directory that cast to a pointer.
As we are there also streamline the error response to -EINVAL on return.

Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

mtd: nand: arasan: Set ofnode value

Ofnode value is not set, so all the DT properties are not being read
and due to this default values are being used.

Find nand node and set chip->flash_node value.

Signed-off-by: Ashok Reddy Soma <ashok.reddy.soma@amd.com>
Link: https://lore.kernel.org/r/20230224050709.30014-3-ashok.reddy.soma@amd.com
Signed-off-by: Michal Simek <michal.simek@amd.com>

mtd: nand: arasan: Remove hardcoded bbt option

Bad block table option is hardcoded to read from flash with
NAND_BBT_USE_FLASH option. This decision should be done based on DT
property. Remove this hardcoding, to be able to use DT property.

Signed-off-by: Ashok Reddy Soma <ashok.reddy.soma@amd.com>
Link: https://lore.kernel.org/r/20230224050709.30014-2-ashok.reddy.soma@amd.com
Signed-off-by: Michal Simek <michal.simek@amd.com>

dm: Rename DM_GET_DRIVER() to DM_DRIVER_GET()

In the spirit of using the same base name for all of these related macros,
rename this to have the operation at the end. This is not widely used so
the impact is fairly small.

Signed-off-by: Simon Glass <sjg@chromium.org>

dm: treewide: Rename auto_alloc_size members to be shorter

This construct is quite long-winded. In earlier days it made some sense
since auto-allocation was a strange concept. But with driver model now
used pretty universally, we can shorten this to 'auto'. This reduces
verbosity and makes it easier to read.

Coincidentally it also ensures that every declaration is on one line,
thus making dtoc's job easier.

Signed-off-by: Simon Glass <sjg@chromium.org>

xilinx: drivers: Use '_' instead of '-' in driver name

The most of drivers are using '_' instead of '-' in driver name. That's why
sync up these names to be aligned. It looks quite bad to see both in use.
It is visible via dm tree command.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

common: Drop linux/delay.h from common header

Move this uncommon header out of the common header.

Signed-off-by: Simon Glass <sjg@chromium.org>

mtd: nand: Fix on-die ecc issues in arasan_nfc driver

Fixed wrong enumeration of nand_config structure. Added chip select
function before reading the nand chip for maf/dev id's, without this
unable to access id's from some of the micron chips. Also added a
print statement to identify if a nand flash is using on-die ecc.

Signed-off-by: T Karthik Reddy <t.karthik.reddy@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

mtd: nand: Remove hardcoded base address of nand

Remove hardcoded base address of nand and replace it with the
value taken from device tree. Remove base address from header
file too.

Signed-off-by: Ashok Reddy Soma <ashok.reddy.soma@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

mtd: nand: Move arasan nand driver to driver model

Make changes to arasan nand driver to move it to driver model.
Select DM_MTD if arasan nand driver is selected.

Signed-off-by: Ashok Reddy Soma <ashok.reddy.soma@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

mtd: nand: arasan_nfc: Add support for nand multi chip select

This patch adds support for nand multi chip select.
Also adding CONFIG_SYS_NAND_MAX_CHIPS to Kconfig to specify maximum number
of nand chips.

Signed-off-by: Tummala Karthik Reddy <t.karthik.reddy@xilinx.com>
Signed-off-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

mtd: nand: Arasan: Add subpage configuration support

Add support for disabling subpage write support via
CONFIG_SYS_NAND_NO_SUBPAGE_WRITE.

Currently the Linux Arasan driver does not support subpage writes and in
case of running UBI and accessing the same UBI volume from both U-Boot
and Linux it is required to have the same subpage write configuration
else the location of the UBI headers (EC + VID) will be misaligned
(subpage vs page) and incompatible. Hence the need for disabling
subpage write support in the U-Boot Arasan NAND driver.

Signed-off-by: Martin Lund <malu@gomspace.com>
Acked-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

Revert "Merge patch series "arm: dts: am62-beagleplay: Fix Beagleplay Ethernet""

When bringing in the series 'arm: dts: am62-beagleplay: Fix Beagleplay
Ethernet"' I failed to notice that b4 noticed it was based on next and
so took that as the base commit and merged that part of next to master.

This reverts commit c8ffd1356d42223cbb8c86280a083cc3c93e6426, reversing
changes made to 2ee6f3a5f7550de3599faef9704e166e5dcace35.

Reported-by: Jonas Karlman <jonas@kwiboo.se>
Signed-off-by: Tom Rini <trini@konsulko.com>

mtd: Remove <common.h> and add needed includes

Remove <common.h> from this driver directory and when needed
add missing include files directly.

Reviewed-by: William Zhang <william.zhang@broadcom.com>
Signed-off-by: Tom Rini <trini@konsulko.com>

mtd: nand: arasan: Fix the crash caused by use after free

The below exception observed on QEMU, as it doesn't support
NAND controller.

"Synchronous Abort" handler, esr 0x96000005, far 0x17acfc878
elr: 000000000803ad40 lr : 000000000805f438 (reloc)
elr: 000000007fcb4d40 lr : 000000007fcd9438
x0 : 000000007bbfc880 x1 : 00000000ff100000
x2 : 000000007fcf059c x3 : 000000007bbfc870
x4 : 000000007fd9a388 x5 : 000000017acfc870
x6 : 0000000000000000 x7 : 000000007bbfd0e0
x8 : 0000000000003dd4 x9 : 000000007bbeec0c
x10: 0000000000000001 x11: 0000000000003f8c
x12: 000000007bbeecfc x13: 000000007bbeeeb0
x14: 000000007bbeeeb0 x15: 000000007bbee474
x16: 000000007fcef18c x17: 0000000000000000
x18: 000000007bbf9d70 x19: 000000007bbfc888
x20: 000000007bbfc870 x21: 000000007fd68ddb
x22: 00000000ffffffed x23: 000000007bbfc878
x24: 0000000000000000 x25: 0000000000000000
x26: 0000000000000000 x27: 0000000000000000
x28: 0000000000000000 x29: 000000007bbeed10

Code: 927ff8c1 924000c6 8b010065 f9400887 (f94004a2)
Resetting CPU ...

The crash is caused by the use after free.
Updating the correct return codes rather than hardcoding.
Fixes: 3dd0f8cccd6d ("mtd: nand: Remove hardcoded base address of nand")

Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com>
Link: https://lore.kernel.org/r/20240306033404.18537-1-venkatesh.abbarapu@amd.com
Signed-off-by: Michal Simek <michal.simek@amd.com>

mtd: nand: arasan: Print warning for unsupported ecc modes

Currently only hw ecc is supported in U-Boot. If any other ecc mode is
given in DT, it simply through an error. So better print
what is being done.

Revert this patch once soft ecc support is fixed in future.

Signed-off-by: Ashok Reddy Soma <ashok.reddy.soma@amd.com>
Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com>
Link: https://lore.kernel.org/r/20240306032703.17508-1-venkatesh.abbarapu@amd.com
Signed-off-by: Michal Simek <michal.simek@amd.com>

common: Drop linux/printk.h from common header

This old patch was marked as deferred. Bring it back to life, to continue
towards the removal of common.h

Move this out of the common header and include it only where needed.

Signed-off-by: Simon Glass <sjg@chromium.org>

drivers: use dev_read_addr_ptr when cast to pointer

The fdt_addr_t and phys_addr_t size have been decoupled. A 32bit CPU
can expect 64-bit data from the device tree parser, so use
dev_read_addr_ptr instead of the dev_read_addr function in the
various files in the drivers directory that cast to a pointer.
As we are there also streamline the error response to -EINVAL on return.

Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

mtd: nand: arasan: Set ofnode value

Ofnode value is not set, so all the DT properties are not being read
and due to this default values are being used.

Find nand node and set chip->flash_node value.

Signed-off-by: Ashok Reddy Soma <ashok.reddy.soma@amd.com>
Link: https://lore.kernel.org/r/20230224050709.30014-3-ashok.reddy.soma@amd.com
Signed-off-by: Michal Simek <michal.simek@amd.com>

mtd: nand: arasan: Remove hardcoded bbt option

Bad block table option is hardcoded to read from flash with
NAND_BBT_USE_FLASH option. This decision should be done based on DT
property. Remove this hardcoding, to be able to use DT property.

Signed-off-by: Ashok Reddy Soma <ashok.reddy.soma@amd.com>
Link: https://lore.kernel.org/r/20230224050709.30014-2-ashok.reddy.soma@amd.com
Signed-off-by: Michal Simek <michal.simek@amd.com>

dm: Rename DM_GET_DRIVER() to DM_DRIVER_GET()

In the spirit of using the same base name for all of these related macros,
rename this to have the operation at the end. This is not widely used so
the impact is fairly small.

Signed-off-by: Simon Glass <sjg@chromium.org>

dm: treewide: Rename auto_alloc_size members to be shorter

This construct is quite long-winded. In earlier days it made some sense
since auto-allocation was a strange concept. But with driver model now
used pretty universally, we can shorten this to 'auto'. This reduces
verbosity and makes it easier to read.

Coincidentally it also ensures that every declaration is on one line,
thus making dtoc's job easier.

Signed-off-by: Simon Glass <sjg@chromium.org>

xilinx: drivers: Use '_' instead of '-' in driver name

The most of drivers are using '_' instead of '-' in driver name. That's why
sync up these names to be aligned. It looks quite bad to see both in use.
It is visible via dm tree command.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

common: Drop linux/delay.h from common header

Move this uncommon header out of the common header.

Signed-off-by: Simon Glass <sjg@chromium.org>

mtd: nand: Fix on-die ecc issues in arasan_nfc driver

Fixed wrong enumeration of nand_config structure. Added chip select
function before reading the nand chip for maf/dev id's, without this
unable to access id's from some of the micron chips. Also added a
print statement to identify if a nand flash is using on-die ecc.

Signed-off-by: T Karthik Reddy <t.karthik.reddy@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

mtd: nand: Remove hardcoded base address of nand

Remove hardcoded base address of nand and replace it with the
value taken from device tree. Remove base address from header
file too.

Signed-off-by: Ashok Reddy Soma <ashok.reddy.soma@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

mtd: nand: Move arasan nand driver to driver model

Make changes to arasan nand driver to move it to driver model.
Select DM_MTD if arasan nand driver is selected.

Signed-off-by: Ashok Reddy Soma <ashok.reddy.soma@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

mtd: nand: arasan_nfc: Add support for nand multi chip select

This patch adds support for nand multi chip select.
Also adding CONFIG_SYS_NAND_MAX_CHIPS to Kconfig to specify maximum number
of nand chips.

Signed-off-by: Tummala Karthik Reddy <t.karthik.reddy@xilinx.com>
Signed-off-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

mtd: nand: Arasan: Add subpage configuration support

Add support for disabling subpage write support via
CONFIG_SYS_NAND_NO_SUBPAGE_WRITE.

Currently the Linux Arasan driver does not support subpage writes and in
case of running UBI and accessing the same UBI volume from both U-Boot
and Linux it is required to have the same subpage write configuration
else the location of the UBI headers (EC + VID) will be misaligned
(subpage vs page) and incompatible. Hence the need for disabling
subpage write support in the U-Boot Arasan NAND driver.

Signed-off-by: Martin Lund <malu@gomspace.com>
Acked-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

Revert "Merge patch series "arm: dts: am62-beagleplay: Fix Beagleplay Ethernet""

When bringing in the series 'arm: dts: am62-beagleplay: Fix Beagleplay
Ethernet"' I failed to notice that b4 noticed it was based on next and
so took that as the base commit and merged that part of next to master.

This reverts commit c8ffd1356d42223cbb8c86280a083cc3c93e6426, reversing
changes made to 2ee6f3a5f7550de3599faef9704e166e5dcace35.

Reported-by: Jonas Karlman <jonas@kwiboo.se>
Signed-off-by: Tom Rini <trini@konsulko.com>

mtd: Remove <common.h> and add needed includes

Remove <common.h> from this driver directory and when needed
add missing include files directly.

Reviewed-by: William Zhang <william.zhang@broadcom.com>
Signed-off-by: Tom Rini <trini@konsulko.com>

mtd: nand: arasan: Fix the crash caused by use after free

The below exception observed on QEMU, as it doesn't support
NAND controller.

"Synchronous Abort" handler, esr 0x96000005, far 0x17acfc878
elr: 000000000803ad40 lr : 000000000805f438 (reloc)
elr: 000000007fcb4d40 lr : 000000007fcd9438
x0 : 000000007bbfc880 x1 : 00000000ff100000
x2 : 000000007fcf059c x3 : 000000007bbfc870
x4 : 000000007fd9a388 x5 : 000000017acfc870
x6 : 0000000000000000 x7 : 000000007bbfd0e0
x8 : 0000000000003dd4 x9 : 000000007bbeec0c
x10: 0000000000000001 x11: 0000000000003f8c
x12: 000000007bbeecfc x13: 000000007bbeeeb0
x14: 000000007bbeeeb0 x15: 000000007bbee474
x16: 000000007fcef18c x17: 0000000000000000
x18: 000000007bbf9d70 x19: 000000007bbfc888
x20: 000000007bbfc870 x21: 000000007fd68ddb
x22: 00000000ffffffed x23: 000000007bbfc878
x24: 0000000000000000 x25: 0000000000000000
x26: 0000000000000000 x27: 0000000000000000
x28: 0000000000000000 x29: 000000007bbeed10

Code: 927ff8c1 924000c6 8b010065 f9400887 (f94004a2)
Resetting CPU ...

The crash is caused by the use after free.
Updating the correct return codes rather than hardcoding.
Fixes: 3dd0f8cccd6d ("mtd: nand: Remove hardcoded base address of nand")

Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com>
Link: https://lore.kernel.org/r/20240306033404.18537-1-venkatesh.abbarapu@amd.com
Signed-off-by: Michal Simek <michal.simek@amd.com>

mtd: nand: arasan: Print warning for unsupported ecc modes

Currently only hw ecc is supported in U-Boot. If any other ecc mode is
given in DT, it simply through an error. So better print
what is being done.

Revert this patch once soft ecc support is fixed in future.

Signed-off-by: Ashok Reddy Soma <ashok.reddy.soma@amd.com>
Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com>
Link: https://lore.kernel.org/r/20240306032703.17508-1-venkatesh.abbarapu@amd.com
Signed-off-by: Michal Simek <michal.simek@amd.com>

common: Drop linux/printk.h from common header

This old patch was marked as deferred. Bring it back to life, to continue
towards the removal of common.h

Move this out of the common header and include it only where needed.

Signed-off-by: Simon Glass <sjg@chromium.org>

drivers: use dev_read_addr_ptr when cast to pointer

The fdt_addr_t and phys_addr_t size have been decoupled. A 32bit CPU
can expect 64-bit data from the device tree parser, so use
dev_read_addr_ptr instead of the dev_read_addr function in the
various files in the drivers directory that cast to a pointer.
As we are there also streamline the error response to -EINVAL on return.

Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

mtd: nand: arasan: Set ofnode value

Ofnode value is not set, so all the DT properties are not being read
and due to this default values are being used.

Find nand node and set chip->flash_node value.

Signed-off-by: Ashok Reddy Soma <ashok.reddy.soma@amd.com>
Link: https://lore.kernel.org/r/20230224050709.30014-3-ashok.reddy.soma@amd.com
Signed-off-by: Michal Simek <michal.simek@amd.com>

mtd: nand: arasan: Remove hardcoded bbt option

Bad block table option is hardcoded to read from flash with
NAND_BBT_USE_FLASH option. This decision should be done based on DT
property. Remove this hardcoding, to be able to use DT property.

Signed-off-by: Ashok Reddy Soma <ashok.reddy.soma@amd.com>
Link: https://lore.kernel.org/r/20230224050709.30014-2-ashok.reddy.soma@amd.com
Signed-off-by: Michal Simek <michal.simek@amd.com>

dm: Rename DM_GET_DRIVER() to DM_DRIVER_GET()

In the spirit of using the same base name for all of these related macros,
rename this to have the operation at the end. This is not widely used so
the impact is fairly small.

Signed-off-by: Simon Glass <sjg@chromium.org>

dm: treewide: Rename auto_alloc_size members to be shorter

This construct is quite long-winded. In earlier days it made some sense
since auto-allocation was a strange concept. But with driver model now
used pretty universally, we can shorten this to 'auto'. This reduces
verbosity and makes it easier to read.

Coincidentally it also ensures that every declaration is on one line,
thus making dtoc's job easier.

Signed-off-by: Simon Glass <sjg@chromium.org>

xilinx: drivers: Use '_' instead of '-' in driver name

The most of drivers are using '_' instead of '-' in driver name. That's why
sync up these names to be aligned. It looks quite bad to see both in use.
It is visible via dm tree command.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

common: Drop linux/delay.h from common header

Move this uncommon header out of the common header.

Signed-off-by: Simon Glass <sjg@chromium.org>

mtd: nand: Fix on-die ecc issues in arasan_nfc driver

Fixed wrong enumeration of nand_config structure. Added chip select
function before reading the nand chip for maf/dev id's, without this
unable to access id's from some of the micron chips. Also added a
print statement to identify if a nand flash is using on-die ecc.

Signed-off-by: T Karthik Reddy <t.karthik.reddy@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

mtd: nand: Remove hardcoded base address of nand

Remove hardcoded base address of nand and replace it with the
value taken from device tree. Remove base address from header
file too.

Signed-off-by: Ashok Reddy Soma <ashok.reddy.soma@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

mtd: nand: Move arasan nand driver to driver model

Make changes to arasan nand driver to move it to driver model.
Select DM_MTD if arasan nand driver is selected.

Signed-off-by: Ashok Reddy Soma <ashok.reddy.soma@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

mtd: nand: arasan_nfc: Add support for nand multi chip select

This patch adds support for nand multi chip select.
Also adding CONFIG_SYS_NAND_MAX_CHIPS to Kconfig to specify maximum number
of nand chips.

Signed-off-by: Tummala Karthik Reddy <t.karthik.reddy@xilinx.com>
Signed-off-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

mtd: nand: Arasan: Add subpage configuration support

Add support for disabling subpage write support via
CONFIG_SYS_NAND_NO_SUBPAGE_WRITE.

Currently the Linux Arasan driver does not support subpage writes and in
case of running UBI and accessing the same UBI volume from both U-Boot
and Linux it is required to have the same subpage write configuration
else the location of the UBI headers (EC + VID) will be misaligned
(subpage vs page) and incompatible. Hence the need for disabling
subpage write support in the U-Boot Arasan NAND driver.

Signed-off-by: Martin Lund <malu@gomspace.com>
Acked-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

Revert "Merge patch series "arm: dts: am62-beagleplay: Fix Beagleplay Ethernet""

When bringing in the series 'arm: dts: am62-beagleplay: Fix Beagleplay
Ethernet"' I failed to notice that b4 noticed it was based on next and
so took that as the base commit and merged that part of next to master.

This reverts commit c8ffd1356d42223cbb8c86280a083cc3c93e6426, reversing
changes made to 2ee6f3a5f7550de3599faef9704e166e5dcace35.

Reported-by: Jonas Karlman <jonas@kwiboo.se>
Signed-off-by: Tom Rini <trini@konsulko.com>

mtd: Remove <common.h> and add needed includes

Remove <common.h> from this driver directory and when needed
add missing include files directly.

Reviewed-by: William Zhang <william.zhang@broadcom.com>
Signed-off-by: Tom Rini <trini@konsulko.com>

mtd: nand: arasan: Fix the crash caused by use after free

The below exception observed on QEMU, as it doesn't support
NAND controller.

"Synchronous Abort" handler, esr 0x96000005, far 0x17acfc878
elr: 000000000803ad40 lr : 000000000805f438 (reloc)
elr: 000000007fcb4d40 lr : 000000007fcd9438
x0 : 000000007bbfc880 x1 : 00000000ff100000
x2 : 000000007fcf059c x3 : 000000007bbfc870
x4 : 000000007fd9a388 x5 : 000000017acfc870
x6 : 0000000000000000 x7 : 000000007bbfd0e0
x8 : 0000000000003dd4 x9 : 000000007bbeec0c
x10: 0000000000000001 x11: 0000000000003f8c
x12: 000000007bbeecfc x13: 000000007bbeeeb0
x14: 000000007bbeeeb0 x15: 000000007bbee474
x16: 000000007fcef18c x17: 0000000000000000
x18: 000000007bbf9d70 x19: 000000007bbfc888
x20: 000000007bbfc870 x21: 000000007fd68ddb
x22: 00000000ffffffed x23: 000000007bbfc878
x24: 0000000000000000 x25: 0000000000000000
x26: 0000000000000000 x27: 0000000000000000
x28: 0000000000000000 x29: 000000007bbeed10

Code: 927ff8c1 924000c6 8b010065 f9400887 (f94004a2)
Resetting CPU ...

The crash is caused by the use after free.
Updating the correct return codes rather than hardcoding.
Fixes: 3dd0f8cccd6d ("mtd: nand: Remove hardcoded base address of nand")

Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com>
Link: https://lore.kernel.org/r/20240306033404.18537-1-venkatesh.abbarapu@amd.com
Signed-off-by: Michal Simek <michal.simek@amd.com>

mtd: nand: arasan: Print warning for unsupported ecc modes

Currently only hw ecc is supported in U-Boot. If any other ecc mode is
given in DT, it simply through an error. So better print
what is being done.

Revert this patch once soft ecc support is fixed in future.

Signed-off-by: Ashok Reddy Soma <ashok.reddy.soma@amd.com>
Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com>
Link: https://lore.kernel.org/r/20240306032703.17508-1-venkatesh.abbarapu@amd.com
Signed-off-by: Michal Simek <michal.simek@amd.com>

common: Drop linux/printk.h from common header

This old patch was marked as deferred. Bring it back to life, to continue
towards the removal of common.h

Move this out of the common header and include it only where needed.

Signed-off-by: Simon Glass <sjg@chromium.org>

drivers: use dev_read_addr_ptr when cast to pointer

The fdt_addr_t and phys_addr_t size have been decoupled. A 32bit CPU
can expect 64-bit data from the device tree parser, so use
dev_read_addr_ptr instead of the dev_read_addr function in the
various files in the drivers directory that cast to a pointer.
As we are there also streamline the error response to -EINVAL on return.

Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

mtd: nand: arasan: Set ofnode value

Ofnode value is not set, so all the DT properties are not being read
and due to this default values are being used.

Find nand node and set chip->flash_node value.

Signed-off-by: Ashok Reddy Soma <ashok.reddy.soma@amd.com>
Link: https://lore.kernel.org/r/20230224050709.30014-3-ashok.reddy.soma@amd.com
Signed-off-by: Michal Simek <michal.simek@amd.com>

mtd: nand: arasan: Remove hardcoded bbt option

Bad block table option is hardcoded to read from flash with
NAND_BBT_USE_FLASH option. This decision should be done based on DT
property. Remove this hardcoding, to be able to use DT property.

Signed-off-by: Ashok Reddy Soma <ashok.reddy.soma@amd.com>
Link: https://lore.kernel.org/r/20230224050709.30014-2-ashok.reddy.soma@amd.com
Signed-off-by: Michal Simek <michal.simek@amd.com>

dm: Rename DM_GET_DRIVER() to DM_DRIVER_GET()

In the spirit of using the same base name for all of these related macros,
rename this to have the operation at the end. This is not widely used so
the impact is fairly small.

Signed-off-by: Simon Glass <sjg@chromium.org>

dm: treewide: Rename auto_alloc_size members to be shorter

This construct is quite long-winded. In earlier days it made some sense
since auto-allocation was a strange concept. But with driver model now
used pretty universally, we can shorten this to 'auto'. This reduces
verbosity and makes it easier to read.

Coincidentally it also ensures that every declaration is on one line,
thus making dtoc's job easier.

Signed-off-by: Simon Glass <sjg@chromium.org>

xilinx: drivers: Use '_' instead of '-' in driver name

The most of drivers are using '_' instead of '-' in driver name. That's why
sync up these names to be aligned. It looks quite bad to see both in use.
It is visible via dm tree command.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

common: Drop linux/delay.h from common header

Move this uncommon header out of the common header.

Signed-off-by: Simon Glass <sjg@chromium.org>

mtd: nand: Fix on-die ecc issues in arasan_nfc driver

Fixed wrong enumeration of nand_config structure. Added chip select
function before reading the nand chip for maf/dev id's, without this
unable to access id's from some of the micron chips. Also added a
print statement to identify if a nand flash is using on-die ecc.

Signed-off-by: T Karthik Reddy <t.karthik.reddy@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

mtd: nand: Remove hardcoded base address of nand

Remove hardcoded base address of nand and replace it with the
value taken from device tree. Remove base address from header
file too.

Signed-off-by: Ashok Reddy Soma <ashok.reddy.soma@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

mtd: nand: Move arasan nand driver to driver model

Make changes to arasan nand driver to move it to driver model.
Select DM_MTD if arasan nand driver is selected.

Signed-off-by: Ashok Reddy Soma <ashok.reddy.soma@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

mtd: nand: arasan_nfc: Add support for nand multi chip select

This patch adds support for nand multi chip select.
Also adding CONFIG_SYS_NAND_MAX_CHIPS to Kconfig to specify maximum number
of nand chips.

Signed-off-by: Tummala Karthik Reddy <t.karthik.reddy@xilinx.com>
Signed-off-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

mtd: nand: Arasan: Add subpage configuration support

Add support for disabling subpage write support via
CONFIG_SYS_NAND_NO_SUBPAGE_WRITE.

Currently the Linux Arasan driver does not support subpage writes and in
case of running UBI and accessing the same UBI volume from both U-Boot
and Linux it is required to have the same subpage write configuration
else the location of the UBI headers (EC + VID) will be misaligned
(subpage vs page) and incompatible. Hence the need for disabling
subpage write support in the U-Boot Arasan NAND driver.

Signed-off-by: Martin Lund <malu@gomspace.com>
Acked-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

Revert "Merge patch series "arm: dts: am62-beagleplay: Fix Beagleplay Ethernet""

When bringing in the series 'arm: dts: am62-beagleplay: Fix Beagleplay
Ethernet"' I failed to notice that b4 noticed it was based on next and
so took that as the base commit and merged that part of next to master.

This reverts commit c8ffd1356d42223cbb8c86280a083cc3c93e6426, reversing
changes made to 2ee6f3a5f7550de3599faef9704e166e5dcace35.

Reported-by: Jonas Karlman <jonas@kwiboo.se>
Signed-off-by: Tom Rini <trini@konsulko.com>

mtd: Remove <common.h> and add needed includes

Remove <common.h> from this driver directory and when needed
add missing include files directly.

Reviewed-by: William Zhang <william.zhang@broadcom.com>
Signed-off-by: Tom Rini <trini@konsulko.com>

mtd: nand: arasan: Fix the crash caused by use after free

The below exception observed on QEMU, as it doesn't support
NAND controller.

"Synchronous Abort" handler, esr 0x96000005, far 0x17acfc878
elr: 000000000803ad40 lr : 000000000805f438 (reloc)
elr: 000000007fcb4d40 lr : 000000007fcd9438
x0 : 000000007bbfc880 x1 : 00000000ff100000
x2 : 000000007fcf059c x3 : 000000007bbfc870
x4 : 000000007fd9a388 x5 : 000000017acfc870
x6 : 0000000000000000 x7 : 000000007bbfd0e0
x8 : 0000000000003dd4 x9 : 000000007bbeec0c
x10: 0000000000000001 x11: 0000000000003f8c
x12: 000000007bbeecfc x13: 000000007bbeeeb0
x14: 000000007bbeeeb0 x15: 000000007bbee474
x16: 000000007fcef18c x17: 0000000000000000
x18: 000000007bbf9d70 x19: 000000007bbfc888
x20: 000000007bbfc870 x21: 000000007fd68ddb
x22: 00000000ffffffed x23: 000000007bbfc878
x24: 0000000000000000 x25: 0000000000000000
x26: 0000000000000000 x27: 0000000000000000
x28: 0000000000000000 x29: 000000007bbeed10

Code: 927ff8c1 924000c6 8b010065 f9400887 (f94004a2)
Resetting CPU ...

The crash is caused by the use after free.
Updating the correct return codes rather than hardcoding.
Fixes: 3dd0f8cccd6d ("mtd: nand: Remove hardcoded base address of nand")

Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com>
Link: https://lore.kernel.org/r/20240306033404.18537-1-venkatesh.abbarapu@amd.com
Signed-off-by: Michal Simek <michal.simek@amd.com>

mtd: nand: arasan: Print warning for unsupported ecc modes

Currently only hw ecc is supported in U-Boot. If any other ecc mode is
given in DT, it simply through an error. So better print
what is being done.

Revert this patch once soft ecc support is fixed in future.

Signed-off-by: Ashok Reddy Soma <ashok.reddy.soma@amd.com>
Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com>
Link: https://lore.kernel.org/r/20240306032703.17508-1-venkatesh.abbarapu@amd.com
Signed-off-by: Michal Simek <michal.simek@amd.com>

common: Drop linux/printk.h from common header

This old patch was marked as deferred. Bring it back to life, to continue
towards the removal of common.h

Move this out of the common header and include it only where needed.

Signed-off-by: Simon Glass <sjg@chromium.org>

drivers: use dev_read_addr_ptr when cast to pointer

The fdt_addr_t and phys_addr_t size have been decoupled. A 32bit CPU
can expect 64-bit data from the device tree parser, so use
dev_read_addr_ptr instead of the dev_read_addr function in the
various files in the drivers directory that cast to a pointer.
As we are there also streamline the error response to -EINVAL on return.

Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

mtd: nand: arasan: Set ofnode value

Ofnode value is not set, so all the DT properties are not being read
and due to this default values are being used.

Find nand node and set chip->flash_node value.

Signed-off-by: Ashok Reddy Soma <ashok.reddy.soma@amd.com>
Link: https://lore.kernel.org/r/20230224050709.30014-3-ashok.reddy.soma@amd.com
Signed-off-by: Michal Simek <michal.simek@amd.com>

mtd: nand: arasan: Remove hardcoded bbt option

Bad block table option is hardcoded to read from flash with
NAND_BBT_USE_FLASH option. This decision should be done based on DT
property. Remove this hardcoding, to be able to use DT property.

Signed-off-by: Ashok Reddy Soma <ashok.reddy.soma@amd.com>
Link: https://lore.kernel.org/r/20230224050709.30014-2-ashok.reddy.soma@amd.com
Signed-off-by: Michal Simek <michal.simek@amd.com>

dm: Rename DM_GET_DRIVER() to DM_DRIVER_GET()

In the spirit of using the same base name for all of these related macros,
rename this to have the operation at the end. This is not widely used so
the impact is fairly small.

Signed-off-by: Simon Glass <sjg@chromium.org>

dm: treewide: Rename auto_alloc_size members to be shorter

This construct is quite long-winded. In earlier days it made some sense
since auto-allocation was a strange concept. But with driver model now
used pretty universally, we can shorten this to 'auto'. This reduces
verbosity and makes it easier to read.

Coincidentally it also ensures that every declaration is on one line,
thus making dtoc's job easier.

Signed-off-by: Simon Glass <sjg@chromium.org>

xilinx: drivers: Use '_' instead of '-' in driver name

The most of drivers are using '_' instead of '-' in driver name. That's why
sync up these names to be aligned. It looks quite bad to see both in use.
It is visible via dm tree command.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

common: Drop linux/delay.h from common header

Move this uncommon header out of the common header.

Signed-off-by: Simon Glass <sjg@chromium.org>

mtd: nand: Fix on-die ecc issues in arasan_nfc driver

Fixed wrong enumeration of nand_config structure. Added chip select
function before reading the nand chip for maf/dev id's, without this
unable to access id's from some of the micron chips. Also added a
print statement to identify if a nand flash is using on-die ecc.

Signed-off-by: T Karthik Reddy <t.karthik.reddy@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

mtd: nand: Remove hardcoded base address of nand

Remove hardcoded base address of nand and replace it with the
value taken from device tree. Remove base address from header
file too.

Signed-off-by: Ashok Reddy Soma <ashok.reddy.soma@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

mtd: nand: Move arasan nand driver to driver model

Make changes to arasan nand driver to move it to driver model.
Select DM_MTD if arasan nand driver is selected.

Signed-off-by: Ashok Reddy Soma <ashok.reddy.soma@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

mtd: nand: arasan_nfc: Add support for nand multi chip select

This patch adds support for nand multi chip select.
Also adding CONFIG_SYS_NAND_MAX_CHIPS to Kconfig to specify maximum number
of nand chips.

Signed-off-by: Tummala Karthik Reddy <t.karthik.reddy@xilinx.com>
Signed-off-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

mtd: nand: Arasan: Add subpage configuration support

Add support for disabling subpage write support via
CONFIG_SYS_NAND_NO_SUBPAGE_WRITE.

Currently the Linux Arasan driver does not support subpage writes and in
case of running UBI and accessing the same UBI volume from both U-Boot
and Linux it is required to have the same subpage write configuration
else the location of the UBI headers (EC + VID) will be misaligned
(subpage vs page) and incompatible. Hence the need for disabling
subpage write support in the U-Boot Arasan NAND driver.

Signed-off-by: Martin Lund <malu@gomspace.com>
Acked-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

Revert "Merge patch series "arm: dts: am62-beagleplay: Fix Beagleplay Ethernet""

When bringing in the series 'arm: dts: am62-beagleplay: Fix Beagleplay
Ethernet"' I failed to notice that b4 noticed it was based on next and
so took that as the base commit and merged that part of next to master.

This reverts commit c8ffd1356d42223cbb8c86280a083cc3c93e6426, reversing
changes made to 2ee6f3a5f7550de3599faef9704e166e5dcace35.

Reported-by: Jonas Karlman <jonas@kwiboo.se>
Signed-off-by: Tom Rini <trini@konsulko.com>

mtd: Remove <common.h> and add needed includes

Remove <common.h> from this driver directory and when needed
add missing include files directly.

Reviewed-by: William Zhang <william.zhang@broadcom.com>
Signed-off-by: Tom Rini <trini@konsulko.com>

mtd: nand: arasan: Fix the crash caused by use after free

The below exception observed on QEMU, as it doesn't support
NAND controller.

"Synchronous Abort" handler, esr 0x96000005, far 0x17acfc878
elr: 000000000803ad40 lr : 000000000805f438 (reloc)
elr: 000000007fcb4d40 lr : 000000007fcd9438
x0 : 000000007bbfc880 x1 : 00000000ff100000
x2 : 000000007fcf059c x3 : 000000007bbfc870
x4 : 000000007fd9a388 x5 : 000000017acfc870
x6 : 0000000000000000 x7 : 000000007bbfd0e0
x8 : 0000000000003dd4 x9 : 000000007bbeec0c
x10: 0000000000000001 x11: 0000000000003f8c
x12: 000000007bbeecfc x13: 000000007bbeeeb0
x14: 000000007bbeeeb0 x15: 000000007bbee474
x16: 000000007fcef18c x17: 0000000000000000
x18: 000000007bbf9d70 x19: 000000007bbfc888
x20: 000000007bbfc870 x21: 000000007fd68ddb
x22: 00000000ffffffed x23: 000000007bbfc878
x24: 0000000000000000 x25: 0000000000000000
x26: 0000000000000000 x27: 0000000000000000
x28: 0000000000000000 x29: 000000007bbeed10

Code: 927ff8c1 924000c6 8b010065 f9400887 (f94004a2)
Resetting CPU ...

The crash is caused by the use after free.
Updating the correct return codes rather than hardcoding.
Fixes: 3dd0f8cccd6d ("mtd: nand: Remove hardcoded base address of nand")

Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com>
Link: https://lore.kernel.org/r/20240306033404.18537-1-venkatesh.abbarapu@amd.com
Signed-off-by: Michal Simek <michal.simek@amd.com>

mtd: nand: arasan: Print warning for unsupported ecc modes

Currently only hw ecc is supported in U-Boot. If any other ecc mode is
given in DT, it simply through an error. So better print
what is being done.

Revert this patch once soft ecc support is fixed in future.

Signed-off-by: Ashok Reddy Soma <ashok.reddy.soma@amd.com>
Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com>
Link: https://lore.kernel.org/r/20240306032703.17508-1-venkatesh.abbarapu@amd.com
Signed-off-by: Michal Simek <michal.simek@amd.com>

common: Drop linux/printk.h from common header

This old patch was marked as deferred. Bring it back to life, to continue
towards the removal of common.h

Move this out of the common header and include it only where needed.

Signed-off-by: Simon Glass <sjg@chromium.org>

drivers: use dev_read_addr_ptr when cast to pointer

The fdt_addr_t and phys_addr_t size have been decoupled. A 32bit CPU
can expect 64-bit data from the device tree parser, so use
dev_read_addr_ptr instead of the dev_read_addr function in the
various files in the drivers directory that cast to a pointer.
As we are there also streamline the error response to -EINVAL on return.

Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

mtd: nand: arasan: Set ofnode value

Ofnode value is not set, so all the DT properties are not being read
and due to this default values are being used.

Find nand node and set chip->flash_node value.

Signed-off-by: Ashok Reddy Soma <ashok.reddy.soma@amd.com>
Link: https://lore.kernel.org/r/20230224050709.30014-3-ashok.reddy.soma@amd.com
Signed-off-by: Michal Simek <michal.simek@amd.com>

mtd: nand: arasan: Remove hardcoded bbt option

Bad block table option is hardcoded to read from flash with
NAND_BBT_USE_FLASH option. This decision should be done based on DT
property. Remove this hardcoding, to be able to use DT property.

Signed-off-by: Ashok Reddy Soma <ashok.reddy.soma@amd.com>
Link: https://lore.kernel.org/r/20230224050709.30014-2-ashok.reddy.soma@amd.com
Signed-off-by: Michal Simek <michal.simek@amd.com>

dm: Rename DM_GET_DRIVER() to DM_DRIVER_GET()

In the spirit of using the same base name for all of these related macros,
rename this to have the operation at the end. This is not widely used so
the impact is fairly small.

Signed-off-by: Simon Glass <sjg@chromium.org>

dm: treewide: Rename auto_alloc_size members to be shorter

This construct is quite long-winded. In earlier days it made some sense
since auto-allocation was a strange concept. But with driver model now
used pretty universally, we can shorten this to 'auto'. This reduces
verbosity and makes it easier to read.

Coincidentally it also ensures that every declaration is on one line,
thus making dtoc's job easier.

Signed-off-by: Simon Glass <sjg@chromium.org>

xilinx: drivers: Use '_' instead of '-' in driver name

The most of drivers are using '_' instead of '-' in driver name. That's why
sync up these names to be aligned. It looks quite bad to see both in use.
It is visible via dm tree command.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

common: Drop linux/delay.h from common header

Move this uncommon header out of the common header.

Signed-off-by: Simon Glass <sjg@chromium.org>

mtd: nand: Fix on-die ecc issues in arasan_nfc driver

Fixed wrong enumeration of nand_config structure. Added chip select
function before reading the nand chip for maf/dev id's, without this
unable to access id's from some of the micron chips. Also added a
print statement to identify if a nand flash is using on-die ecc.

Signed-off-by: T Karthik Reddy <t.karthik.reddy@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

mtd: nand: Remove hardcoded base address of nand

Remove hardcoded base address of nand and replace it with the
value taken from device tree. Remove base address from header
file too.

Signed-off-by: Ashok Reddy Soma <ashok.reddy.soma@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

mtd: nand: Move arasan nand driver to driver model

Make changes to arasan nand driver to move it to driver model.
Select DM_MTD if arasan nand driver is selected.

Signed-off-by: Ashok Reddy Soma <ashok.reddy.soma@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

mtd: nand: arasan_nfc: Add support for nand multi chip select

This patch adds support for nand multi chip select.
Also adding CONFIG_SYS_NAND_MAX_CHIPS to Kconfig to specify maximum number
of nand chips.

Signed-off-by: Tummala Karthik Reddy <t.karthik.reddy@xilinx.com>
Signed-off-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

mtd: nand: Arasan: Add subpage configuration support

Add support for disabling subpage write support via
CONFIG_SYS_NAND_NO_SUBPAGE_WRITE.

Currently the Linux Arasan driver does not support subpage writes and in
case of running UBI and accessing the same UBI volume from both U-Boot
and Linux it is required to have the same subpage write configuration
else the location of the UBI headers (EC + VID) will be misaligned
(subpage vs page) and incompatible. Hence the need for disabling
subpage write support in the U-Boot Arasan NAND driver.

Signed-off-by: Martin Lund <malu@gomspace.com>
Acked-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

Revert "Merge patch series "arm: dts: am62-beagleplay: Fix Beagleplay Ethernet""

When bringing in the series 'arm: dts: am62-beagleplay: Fix Beagleplay
Ethernet"' I failed to notice that b4 noticed it was based on next and
so took that as the base commit and merged that part of next to master.

This reverts commit c8ffd1356d42223cbb8c86280a083cc3c93e6426, reversing
changes made to 2ee6f3a5f7550de3599faef9704e166e5dcace35.

Reported-by: Jonas Karlman <jonas@kwiboo.se>
Signed-off-by: Tom Rini <trini@konsulko.com>

mtd: Remove <common.h> and add needed includes

Remove <common.h> from this driver directory and when needed
add missing include files directly.

Reviewed-by: William Zhang <william.zhang@broadcom.com>
Signed-off-by: Tom Rini <trini@konsulko.com>

mtd: nand: arasan: Fix the crash caused by use after free

The below exception observed on QEMU, as it doesn't support
NAND controller.

"Synchronous Abort" handler, esr 0x96000005, far 0x17acfc878
elr: 000000000803ad40 lr : 000000000805f438 (reloc)
elr: 000000007fcb4d40 lr : 000000007fcd9438
x0 : 000000007bbfc880 x1 : 00000000ff100000
x2 : 000000007fcf059c x3 : 000000007bbfc870
x4 : 000000007fd9a388 x5 : 000000017acfc870
x6 : 0000000000000000 x7 : 000000007bbfd0e0
x8 : 0000000000003dd4 x9 : 000000007bbeec0c
x10: 0000000000000001 x11: 0000000000003f8c
x12: 000000007bbeecfc x13: 000000007bbeeeb0
x14: 000000007bbeeeb0 x15: 000000007bbee474
x16: 000000007fcef18c x17: 0000000000000000
x18: 000000007bbf9d70 x19: 000000007bbfc888
x20: 000000007bbfc870 x21: 000000007fd68ddb
x22: 00000000ffffffed x23: 000000007bbfc878
x24: 0000000000000000 x25: 0000000000000000
x26: 0000000000000000 x27: 0000000000000000
x28: 0000000000000000 x29: 000000007bbeed10

Code: 927ff8c1 924000c6 8b010065 f9400887 (f94004a2)
Resetting CPU ...

The crash is caused by the use after free.
Updating the correct return codes rather than hardcoding.
Fixes: 3dd0f8cccd6d ("mtd: nand: Remove hardcoded base address of nand")

Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com>
Link: https://lore.kernel.org/r/20240306033404.18537-1-venkatesh.abbarapu@amd.com
Signed-off-by: Michal Simek <michal.simek@amd.com>

mtd: nand: arasan: Print warning for unsupported ecc modes

Currently only hw ecc is supported in U-Boot. If any other ecc mode is
given in DT, it simply through an error. So better print
what is being done.

Revert this patch once soft ecc support is fixed in future.

Signed-off-by: Ashok Reddy Soma <ashok.reddy.soma@amd.com>
Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com>
Link: https://lore.kernel.org/r/20240306032703.17508-1-venkatesh.abbarapu@amd.com
Signed-off-by: Michal Simek <michal.simek@amd.com>

common: Drop linux/printk.h from common header

This old patch was marked as deferred. Bring it back to life, to continue
towards the removal of common.h

Move this out of the common header and include it only where needed.

Signed-off-by: Simon Glass <sjg@chromium.org>

drivers: use dev_read_addr_ptr when cast to pointer

The fdt_addr_t and phys_addr_t size have been decoupled. A 32bit CPU
can expect 64-bit data from the device tree parser, so use
dev_read_addr_ptr instead of the dev_read_addr function in the
various files in the drivers directory that cast to a pointer.
As we are there also streamline the error response to -EINVAL on return.

Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

mtd: nand: arasan: Set ofnode value

Ofnode value is not set, so all the DT properties are not being read
and due to this default values are being used.

Find nand node and set chip->flash_node value.

Signed-off-by: Ashok Reddy Soma <ashok.reddy.soma@amd.com>
Link: https://lore.kernel.org/r/20230224050709.30014-3-ashok.reddy.soma@amd.com
Signed-off-by: Michal Simek <michal.simek@amd.com>

mtd: nand: arasan: Remove hardcoded bbt option

Bad block table option is hardcoded to read from flash with
NAND_BBT_USE_FLASH option. This decision should be done based on DT
property. Remove this hardcoding, to be able to use DT property.

Signed-off-by: Ashok Reddy Soma <ashok.reddy.soma@amd.com>
Link: https://lore.kernel.org/r/20230224050709.30014-2-ashok.reddy.soma@amd.com
Signed-off-by: Michal Simek <michal.simek@amd.com>

dm: Rename DM_GET_DRIVER() to DM_DRIVER_GET()

In the spirit of using the same base name for all of these related macros,
rename this to have the operation at the end. This is not widely used so
the impact is fairly small.

Signed-off-by: Simon Glass <sjg@chromium.org>

dm: treewide: Rename auto_alloc_size members to be shorter

This construct is quite long-winded. In earlier days it made some sense
since auto-allocation was a strange concept. But with driver model now
used pretty universally, we can shorten this to 'auto'. This reduces
verbosity and makes it easier to read.

Coincidentally it also ensures that every declaration is on one line,
thus making dtoc's job easier.

Signed-off-by: Simon Glass <sjg@chromium.org>

xilinx: drivers: Use '_' instead of '-' in driver name

The most of drivers are using '_' instead of '-' in driver name. That's why
sync up these names to be aligned. It looks quite bad to see both in use.
It is visible via dm tree command.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

common: Drop linux/delay.h from common header

Move this uncommon header out of the common header.

Signed-off-by: Simon Glass <sjg@chromium.org>

mtd: nand: Fix on-die ecc issues in arasan_nfc driver

Fixed wrong enumeration of nand_config structure. Added chip select
function before reading the nand chip for maf/dev id's, without this
unable to access id's from some of the micron chips. Also added a
print statement to identify if a nand flash is using on-die ecc.

Signed-off-by: T Karthik Reddy <t.karthik.reddy@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

mtd: nand: Remove hardcoded base address of nand

Remove hardcoded base address of nand and replace it with the
value taken from device tree. Remove base address from header
file too.

Signed-off-by: Ashok Reddy Soma <ashok.reddy.soma@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

mtd: nand: Move arasan nand driver to driver model

Make changes to arasan nand driver to move it to driver model.
Select DM_MTD if arasan nand driver is selected.

Signed-off-by: Ashok Reddy Soma <ashok.reddy.soma@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

mtd: nand: arasan_nfc: Add support for nand multi chip select

This patch adds support for nand multi chip select.
Also adding CONFIG_SYS_NAND_MAX_CHIPS to Kconfig to specify maximum number
of nand chips.

Signed-off-by: Tummala Karthik Reddy <t.karthik.reddy@xilinx.com>
Signed-off-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

mtd: nand: Arasan: Add subpage configuration support

Add support for disabling subpage write support via
CONFIG_SYS_NAND_NO_SUBPAGE_WRITE.

Currently the Linux Arasan driver does not support subpage writes and in
case of running UBI and accessing the same UBI volume from both U-Boot
and Linux it is required to have the same subpage write configuration
else the location of the UBI headers (EC + VID) will be misaligned
(subpage vs page) and incompatible. Hence the need for disabling
subpage write support in the U-Boot Arasan NAND driver.

Signed-off-by: Martin Lund <malu@gomspace.com>
Acked-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

Revert "Merge patch series "arm: dts: am62-beagleplay: Fix Beagleplay Ethernet""

When bringing in the series 'arm: dts: am62-beagleplay: Fix Beagleplay
Ethernet"' I failed to notice that b4 noticed it was based on next and
so took that as the base commit and merged that part of next to master.

This reverts commit c8ffd1356d42223cbb8c86280a083cc3c93e6426, reversing
changes made to 2ee6f3a5f7550de3599faef9704e166e5dcace35.

Reported-by: Jonas Karlman <jonas@kwiboo.se>
Signed-off-by: Tom Rini <trini@konsulko.com>

mtd: Remove <common.h> and add needed includes

Remove <common.h> from this driver directory and when needed
add missing include files directly.

Reviewed-by: William Zhang <william.zhang@broadcom.com>
Signed-off-by: Tom Rini <trini@konsulko.com>

mtd: nand: arasan: Fix the crash caused by use after free

The below exception observed on QEMU, as it doesn't support
NAND controller.

"Synchronous Abort" handler, esr 0x96000005, far 0x17acfc878
elr: 000000000803ad40 lr : 000000000805f438 (reloc)
elr: 000000007fcb4d40 lr : 000000007fcd9438
x0 : 000000007bbfc880 x1 : 00000000ff100000
x2 : 000000007fcf059c x3 : 000000007bbfc870
x4 : 000000007fd9a388 x5 : 000000017acfc870
x6 : 0000000000000000 x7 : 000000007bbfd0e0
x8 : 0000000000003dd4 x9 : 000000007bbeec0c
x10: 0000000000000001 x11: 0000000000003f8c
x12: 000000007bbeecfc x13: 000000007bbeeeb0
x14: 000000007bbeeeb0 x15: 000000007bbee474
x16: 000000007fcef18c x17: 0000000000000000
x18: 000000007bbf9d70 x19: 000000007bbfc888
x20: 000000007bbfc870 x21: 000000007fd68ddb
x22: 00000000ffffffed x23: 000000007bbfc878
x24: 0000000000000000 x25: 0000000000000000
x26: 0000000000000000 x27: 0000000000000000
x28: 0000000000000000 x29: 000000007bbeed10

Code: 927ff8c1 924000c6 8b010065 f9400887 (f94004a2)
Resetting CPU ...

The crash is caused by the use after free.
Updating the correct return codes rather than hardcoding.
Fixes: 3dd0f8cccd6d ("mtd: nand: Remove hardcoded base address of nand")

Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com>
Link: https://lore.kernel.org/r/20240306033404.18537-1-venkatesh.abbarapu@amd.com
Signed-off-by: Michal Simek <michal.simek@amd.com>

mtd: nand: arasan: Print warning for unsupported ecc modes

Currently only hw ecc is supported in U-Boot. If any other ecc mode is
given in DT, it simply through an error. So better print
what is being done.

Revert this patch once soft ecc support is fixed in future.

Signed-off-by: Ashok Reddy Soma <ashok.reddy.soma@amd.com>
Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com>
Link: https://lore.kernel.org/r/20240306032703.17508-1-venkatesh.abbarapu@amd.com
Signed-off-by: Michal Simek <michal.simek@amd.com>

common: Drop linux/printk.h from common header

This old patch was marked as deferred. Bring it back to life, to continue
towards the removal of common.h

Move this out of the common header and include it only where needed.

Signed-off-by: Simon Glass <sjg@chromium.org>

drivers: use dev_read_addr_ptr when cast to pointer

The fdt_addr_t and phys_addr_t size have been decoupled. A 32bit CPU
can expect 64-bit data from the device tree parser, so use
dev_read_addr_ptr instead of the dev_read_addr function in the
various files in the drivers directory that cast to a pointer.
As we are there also streamline the error response to -EINVAL on return.

Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

mtd: nand: arasan: Set ofnode value

Ofnode value is not set, so all the DT properties are not being read
and due to this default values are being used.

Find nand node and set chip->flash_node value.

Signed-off-by: Ashok Reddy Soma <ashok.reddy.soma@amd.com>
Link: https://lore.kernel.org/r/20230224050709.30014-3-ashok.reddy.soma@amd.com
Signed-off-by: Michal Simek <michal.simek@amd.com>

mtd: nand: arasan: Remove hardcoded bbt option

Bad block table option is hardcoded to read from flash with
NAND_BBT_USE_FLASH option. This decision should be done based on DT
property. Remove this hardcoding, to be able to use DT property.

Signed-off-by: Ashok Reddy Soma <ashok.reddy.soma@amd.com>
Link: https://lore.kernel.org/r/20230224050709.30014-2-ashok.reddy.soma@amd.com
Signed-off-by: Michal Simek <michal.simek@amd.com>

dm: Rename DM_GET_DRIVER() to DM_DRIVER_GET()

In the spirit of using the same base name for all of these related macros,
rename this to have the operation at the end. This is not widely used so
the impact is fairly small.

Signed-off-by: Simon Glass <sjg@chromium.org>

dm: treewide: Rename auto_alloc_size members to be shorter

This construct is quite long-winded. In earlier days it made some sense
since auto-allocation was a strange concept. But with driver model now
used pretty universally, we can shorten this to 'auto'. This reduces
verbosity and makes it easier to read.

Coincidentally it also ensures that every declaration is on one line,
thus making dtoc's job easier.

Signed-off-by: Simon Glass <sjg@chromium.org>

xilinx: drivers: Use '_' instead of '-' in driver name

The most of drivers are using '_' instead of '-' in driver name. That's why
sync up these names to be aligned. It looks quite bad to see both in use.
It is visible via dm tree command.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

common: Drop linux/delay.h from common header

Move this uncommon header out of the common header.

Signed-off-by: Simon Glass <sjg@chromium.org>

mtd: nand: Fix on-die ecc issues in arasan_nfc driver

Fixed wrong enumeration of nand_config structure. Added chip select
function before reading the nand chip for maf/dev id's, without this
unable to access id's from some of the micron chips. Also added a
print statement to identify if a nand flash is using on-die ecc.

Signed-off-by: T Karthik Reddy <t.karthik.reddy@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

mtd: nand: Remove hardcoded base address of nand

Remove hardcoded base address of nand and replace it with the
value taken from device tree. Remove base address from header
file too.

Signed-off-by: Ashok Reddy Soma <ashok.reddy.soma@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

mtd: nand: Move arasan nand driver to driver model

Make changes to arasan nand driver to move it to driver model.
Select DM_MTD if arasan nand driver is selected.

Signed-off-by: Ashok Reddy Soma <ashok.reddy.soma@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

mtd: nand: arasan_nfc: Add support for nand multi chip select

This patch adds support for nand multi chip select.
Also adding CONFIG_SYS_NAND_MAX_CHIPS to Kconfig to specify maximum number
of nand chips.

Signed-off-by: Tummala Karthik Reddy <t.karthik.reddy@xilinx.com>
Signed-off-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

mtd: nand: Arasan: Add subpage configuration support

Add support for disabling subpage write support via
CONFIG_SYS_NAND_NO_SUBPAGE_WRITE.

Currently the Linux Arasan driver does not support subpage writes and in
case of running UBI and accessing the same UBI volume from both U-Boot
and Linux it is required to have the same subpage write configuration
else the location of the UBI headers (EC + VID) will be misaligned
(subpage vs page) and incompatible. Hence the need for disabling
subpage write support in the U-Boot Arasan NAND driver.

Signed-off-by: Martin Lund <malu@gomspace.com>
Acked-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

Revert "Merge patch series "arm: dts: am62-beagleplay: Fix Beagleplay Ethernet""

When bringing in the series 'arm: dts: am62-beagleplay: Fix Beagleplay
Ethernet"' I failed to notice that b4 noticed it was based on next and
so took that as the base commit and merged that part of next to master.

This reverts commit c8ffd1356d42223cbb8c86280a083cc3c93e6426, reversing
changes made to 2ee6f3a5f7550de3599faef9704e166e5dcace35.

Reported-by: Jonas Karlman <jonas@kwiboo.se>
Signed-off-by: Tom Rini <trini@konsulko.com>

mtd: Remove <common.h> and add needed includes

Remove <common.h> from this driver directory and when needed
add missing include files directly.

Reviewed-by: William Zhang <william.zhang@broadcom.com>
Signed-off-by: Tom Rini <trini@konsulko.com>

mtd: nand: arasan: Fix the crash caused by use after free

The below exception observed on QEMU, as it doesn't support
NAND controller.

"Synchronous Abort" handler, esr 0x96000005, far 0x17acfc878
elr: 000000000803ad40 lr : 000000000805f438 (reloc)
elr: 000000007fcb4d40 lr : 000000007fcd9438
x0 : 000000007bbfc880 x1 : 00000000ff100000
x2 : 000000007fcf059c x3 : 000000007bbfc870
x4 : 000000007fd9a388 x5 : 000000017acfc870
x6 : 0000000000000000 x7 : 000000007bbfd0e0
x8 : 0000000000003dd4 x9 : 000000007bbeec0c
x10: 0000000000000001 x11: 0000000000003f8c
x12: 000000007bbeecfc x13: 000000007bbeeeb0
x14: 000000007bbeeeb0 x15: 000000007bbee474
x16: 000000007fcef18c x17: 0000000000000000
x18: 000000007bbf9d70 x19: 000000007bbfc888
x20: 000000007bbfc870 x21: 000000007fd68ddb
x22: 00000000ffffffed x23: 000000007bbfc878
x24: 0000000000000000 x25: 0000000000000000
x26: 0000000000000000 x27: 0000000000000000
x28: 0000000000000000 x29: 000000007bbeed10

Code: 927ff8c1 924000c6 8b010065 f9400887 (f94004a2)
Resetting CPU ...

The crash is caused by the use after free.
Updating the correct return codes rather than hardcoding.
Fixes: 3dd0f8cccd6d ("mtd: nand: Remove hardcoded base address of nand")

Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com>
Link: https://lore.kernel.org/r/20240306033404.18537-1-venkatesh.abbarapu@amd.com
Signed-off-by: Michal Simek <michal.simek@amd.com>

mtd: nand: arasan: Print warning for unsupported ecc modes

Currently only hw ecc is supported in U-Boot. If any other ecc mode is
given in DT, it simply through an error. So better print
what is being done.

Revert this patch once soft ecc support is fixed in future.

Signed-off-by: Ashok Reddy Soma <ashok.reddy.soma@amd.com>
Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com>
Link: https://lore.kernel.org/r/20240306032703.17508-1-venkatesh.abbarapu@amd.com
Signed-off-by: Michal Simek <michal.simek@amd.com>

common: Drop linux/printk.h from common header

This old patch was marked as deferred. Bring it back to life, to continue
towards the removal of common.h

Move this out of the common header and include it only where needed.

Signed-off-by: Simon Glass <sjg@chromium.org>

drivers: use dev_read_addr_ptr when cast to pointer

The fdt_addr_t and phys_addr_t size have been decoupled. A 32bit CPU
can expect 64-bit data from the device tree parser, so use
dev_read_addr_ptr instead of the dev_read_addr function in the
various files in the drivers directory that cast to a pointer.
As we are there also streamline the error response to -EINVAL on return.

Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

mtd: nand: arasan: Set ofnode value

Ofnode value is not set, so all the DT properties are not being read
and due to this default values are being used.

Find nand node and set chip->flash_node value.

Signed-off-by: Ashok Reddy Soma <ashok.reddy.soma@amd.com>
Link: https://lore.kernel.org/r/20230224050709.30014-3-ashok.reddy.soma@amd.com
Signed-off-by: Michal Simek <michal.simek@amd.com>

mtd: nand: arasan: Remove hardcoded bbt option

Bad block table option is hardcoded to read from flash with
NAND_BBT_USE_FLASH option. This decision should be done based on DT
property. Remove this hardcoding, to be able to use DT property.

Signed-off-by: Ashok Reddy Soma <ashok.reddy.soma@amd.com>
Link: https://lore.kernel.org/r/20230224050709.30014-2-ashok.reddy.soma@amd.com
Signed-off-by: Michal Simek <michal.simek@amd.com>

dm: Rename DM_GET_DRIVER() to DM_DRIVER_GET()

In the spirit of using the same base name for all of these related macros,
rename this to have the operation at the end. This is not widely used so
the impact is fairly small.

Signed-off-by: Simon Glass <sjg@chromium.org>

dm: treewide: Rename auto_alloc_size members to be shorter

This construct is quite long-winded. In earlier days it made some sense
since auto-allocation was a strange concept. But with driver model now
used pretty universally, we can shorten this to 'auto'. This reduces
verbosity and makes it easier to read.

Coincidentally it also ensures that every declaration is on one line,
thus making dtoc's job easier.

Signed-off-by: Simon Glass <sjg@chromium.org>

xilinx: drivers: Use '_' instead of '-' in driver name

The most of drivers are using '_' instead of '-' in driver name. That's why
sync up these names to be aligned. It looks quite bad to see both in use.
It is visible via dm tree command.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

common: Drop linux/delay.h from common header

Move this uncommon header out of the common header.

Signed-off-by: Simon Glass <sjg@chromium.org>

mtd: nand: Fix on-die ecc issues in arasan_nfc driver

Fixed wrong enumeration of nand_config structure. Added chip select
function before reading the nand chip for maf/dev id's, without this
unable to access id's from some of the micron chips. Also added a
print statement to identify if a nand flash is using on-die ecc.

Signed-off-by: T Karthik Reddy <t.karthik.reddy@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

mtd: nand: Remove hardcoded base address of nand

Remove hardcoded base address of nand and replace it with the
value taken from device tree. Remove base address from header
file too.

Signed-off-by: Ashok Reddy Soma <ashok.reddy.soma@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

mtd: nand: Move arasan nand driver to driver model

Make changes to arasan nand driver to move it to driver model.
Select DM_MTD if arasan nand driver is selected.

Signed-off-by: Ashok Reddy Soma <ashok.reddy.soma@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

mtd: nand: arasan_nfc: Add support for nand multi chip select

This patch adds support for nand multi chip select.
Also adding CONFIG_SYS_NAND_MAX_CHIPS to Kconfig to specify maximum number
of nand chips.

Signed-off-by: Tummala Karthik Reddy <t.karthik.reddy@xilinx.com>
Signed-off-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

mtd: nand: Arasan: Add subpage configuration support

Add support for disabling subpage write support via
CONFIG_SYS_NAND_NO_SUBPAGE_WRITE.

Currently the Linux Arasan driver does not support subpage writes and in
case of running UBI and accessing the same UBI volume from both U-Boot
and Linux it is required to have the same subpage write configuration
else the location of the UBI headers (EC + VID) will be misaligned
(subpage vs page) and incompatible. Hence the need for disabling
subpage write support in the U-Boot Arasan NAND driver.

Signed-off-by: Martin Lund <malu@gomspace.com>
Acked-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

Revert "Merge patch series "arm: dts: am62-beagleplay: Fix Beagleplay Ethernet""

When bringing in the series 'arm: dts: am62-beagleplay: Fix Beagleplay
Ethernet"' I failed to notice that b4 noticed it was based on next and
so took that as the base commit and merged that part of next to master.

This reverts commit c8ffd1356d42223cbb8c86280a083cc3c93e6426, reversing
changes made to 2ee6f3a5f7550de3599faef9704e166e5dcace35.

Reported-by: Jonas Karlman <jonas@kwiboo.se>
Signed-off-by: Tom Rini <trini@konsulko.com>

mtd: Remove <common.h> and add needed includes

Remove <common.h> from this driver directory and when needed
add missing include files directly.

Reviewed-by: William Zhang <william.zhang@broadcom.com>
Signed-off-by: Tom Rini <trini@konsulko.com>

mtd: nand: arasan: Fix the crash caused by use after free

The below exception observed on QEMU, as it doesn't support
NAND controller.

"Synchronous Abort" handler, esr 0x96000005, far 0x17acfc878
elr: 000000000803ad40 lr : 000000000805f438 (reloc)
elr: 000000007fcb4d40 lr : 000000007fcd9438
x0 : 000000007bbfc880 x1 : 00000000ff100000
x2 : 000000007fcf059c x3 : 000000007bbfc870
x4 : 000000007fd9a388 x5 : 000000017acfc870
x6 : 0000000000000000 x7 : 000000007bbfd0e0
x8 : 0000000000003dd4 x9 : 000000007bbeec0c
x10: 0000000000000001 x11: 0000000000003f8c
x12: 000000007bbeecfc x13: 000000007bbeeeb0
x14: 000000007bbeeeb0 x15: 000000007bbee474
x16: 000000007fcef18c x17: 0000000000000000
x18: 000000007bbf9d70 x19: 000000007bbfc888
x20: 000000007bbfc870 x21: 000000007fd68ddb
x22: 00000000ffffffed x23: 000000007bbfc878
x24: 0000000000000000 x25: 0000000000000000
x26: 0000000000000000 x27: 0000000000000000
x28: 0000000000000000 x29: 000000007bbeed10

Code: 927ff8c1 924000c6 8b010065 f9400887 (f94004a2)
Resetting CPU ...

The crash is caused by the use after free.
Updating the correct return codes rather than hardcoding.
Fixes: 3dd0f8cccd6d ("mtd: nand: Remove hardcoded base address of nand")

Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com>
Link: https://lore.kernel.org/r/20240306033404.18537-1-venkatesh.abbarapu@amd.com
Signed-off-by: Michal Simek <michal.simek@amd.com>

mtd: nand: arasan: Print warning for unsupported ecc modes

Currently only hw ecc is supported in U-Boot. If any other ecc mode is
given in DT, it simply through an error. So better print
what is being done.

Revert this patch once soft ecc support is fixed in future.

Signed-off-by: Ashok Reddy Soma <ashok.reddy.soma@amd.com>
Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com>
Link: https://lore.kernel.org/r/20240306032703.17508-1-venkatesh.abbarapu@amd.com
Signed-off-by: Michal Simek <michal.simek@amd.com>

common: Drop linux/printk.h from common header

This old patch was marked as deferred. Bring it back to life, to continue
towards the removal of common.h

Move this out of the common header and include it only where needed.

Signed-off-by: Simon Glass <sjg@chromium.org>

drivers: use dev_read_addr_ptr when cast to pointer

The fdt_addr_t and phys_addr_t size have been decoupled. A 32bit CPU
can expect 64-bit data from the device tree parser, so use
dev_read_addr_ptr instead of the dev_read_addr function in the
various files in the drivers directory that cast to a pointer.
As we are there also streamline the error response to -EINVAL on return.

Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

mtd: nand: arasan: Set ofnode value

Ofnode value is not set, so all the DT properties are not being read
and due to this default values are being used.

Find nand node and set chip->flash_node value.

Signed-off-by: Ashok Reddy Soma <ashok.reddy.soma@amd.com>
Link: https://lore.kernel.org/r/20230224050709.30014-3-ashok.reddy.soma@amd.com
Signed-off-by: Michal Simek <michal.simek@amd.com>

mtd: nand: arasan: Remove hardcoded bbt option

Bad block table option is hardcoded to read from flash with
NAND_BBT_USE_FLASH option. This decision should be done based on DT
property. Remove this hardcoding, to be able to use DT property.

Signed-off-by: Ashok Reddy Soma <ashok.reddy.soma@amd.com>
Link: https://lore.kernel.org/r/20230224050709.30014-2-ashok.reddy.soma@amd.com
Signed-off-by: Michal Simek <michal.simek@amd.com>

dm: Rename DM_GET_DRIVER() to DM_DRIVER_GET()

In the spirit of using the same base name for all of these related macros,
rename this to have the operation at the end. This is not widely used so
the impact is fairly small.

Signed-off-by: Simon Glass <sjg@chromium.org>

dm: treewide: Rename auto_alloc_size members to be shorter

This construct is quite long-winded. In earlier days it made some sense
since auto-allocation was a strange concept. But with driver model now
used pretty universally, we can shorten this to 'auto'. This reduces
verbosity and makes it easier to read.

Coincidentally it also ensures that every declaration is on one line,
thus making dtoc's job easier.

Signed-off-by: Simon Glass <sjg@chromium.org>

xilinx: drivers: Use '_' instead of '-' in driver name

The most of drivers are using '_' instead of '-' in driver name. That's why
sync up these names to be aligned. It looks quite bad to see both in use.
It is visible via dm tree command.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

common: Drop linux/delay.h from common header

Move this uncommon header out of the common header.

Signed-off-by: Simon Glass <sjg@chromium.org>

mtd: nand: Fix on-die ecc issues in arasan_nfc driver

Fixed wrong enumeration of nand_config structure. Added chip select
function before reading the nand chip for maf/dev id's, without this
unable to access id's from some of the micron chips. Also added a
print statement to identify if a nand flash is using on-die ecc.

Signed-off-by: T Karthik Reddy <t.karthik.reddy@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

mtd: nand: Remove hardcoded base address of nand

Remove hardcoded base address of nand and replace it with the
value taken from device tree. Remove base address from header
file too.

Signed-off-by: Ashok Reddy Soma <ashok.reddy.soma@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

mtd: nand: Move arasan nand driver to driver model

Make changes to arasan nand driver to move it to driver model.
Select DM_MTD if arasan nand driver is selected.

Signed-off-by: Ashok Reddy Soma <ashok.reddy.soma@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

mtd: nand: arasan_nfc: Add support for nand multi chip select

This patch adds support for nand multi chip select.
Also adding CONFIG_SYS_NAND_MAX_CHIPS to Kconfig to specify maximum number
of nand chips.

Signed-off-by: Tummala Karthik Reddy <t.karthik.reddy@xilinx.com>
Signed-off-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

mtd: nand: Arasan: Add subpage configuration support

Add support for disabling subpage write support via
CONFIG_SYS_NAND_NO_SUBPAGE_WRITE.

Currently the Linux Arasan driver does not support subpage writes and in
case of running UBI and accessing the same UBI volume from both U-Boot
and Linux it is required to have the same subpage write configuration
else the location of the UBI headers (EC + VID) will be misaligned
(subpage vs page) and incompatible. Hence the need for disabling
subpage write support in the U-Boot Arasan NAND driver.

Signed-off-by: Martin Lund <malu@gomspace.com>
Acked-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

Revert "Merge patch series "arm: dts: am62-beagleplay: Fix Beagleplay Ethernet""

When bringing in the series 'arm: dts: am62-beagleplay: Fix Beagleplay
Ethernet"' I failed to notice that b4 noticed it was based on next and
so took that as the base commit and merged that part of next to master.

This reverts commit c8ffd1356d42223cbb8c86280a083cc3c93e6426, reversing
changes made to 2ee6f3a5f7550de3599faef9704e166e5dcace35.

Reported-by: Jonas Karlman <jonas@kwiboo.se>
Signed-off-by: Tom Rini <trini@konsulko.com>

mtd: Remove <common.h> and add needed includes

Remove <common.h> from this driver directory and when needed
add missing include files directly.

Reviewed-by: William Zhang <william.zhang@broadcom.com>
Signed-off-by: Tom Rini <trini@konsulko.com>

mtd: nand: arasan: Fix the crash caused by use after free

The below exception observed on QEMU, as it doesn't support
NAND controller.

"Synchronous Abort" handler, esr 0x96000005, far 0x17acfc878
elr: 000000000803ad40 lr : 000000000805f438 (reloc)
elr: 000000007fcb4d40 lr : 000000007fcd9438
x0 : 000000007bbfc880 x1 : 00000000ff100000
x2 : 000000007fcf059c x3 : 000000007bbfc870
x4 : 000000007fd9a388 x5 : 000000017acfc870
x6 : 0000000000000000 x7 : 000000007bbfd0e0
x8 : 0000000000003dd4 x9 : 000000007bbeec0c
x10: 0000000000000001 x11: 0000000000003f8c
x12: 000000007bbeecfc x13: 000000007bbeeeb0
x14: 000000007bbeeeb0 x15: 000000007bbee474
x16: 000000007fcef18c x17: 0000000000000000
x18: 000000007bbf9d70 x19: 000000007bbfc888
x20: 000000007bbfc870 x21: 000000007fd68ddb
x22: 00000000ffffffed x23: 000000007bbfc878
x24: 0000000000000000 x25: 0000000000000000
x26: 0000000000000000 x27: 0000000000000000
x28: 0000000000000000 x29: 000000007bbeed10

Code: 927ff8c1 924000c6 8b010065 f9400887 (f94004a2)
Resetting CPU ...

The crash is caused by the use after free.
Updating the correct return codes rather than hardcoding.
Fixes: 3dd0f8cccd6d ("mtd: nand: Remove hardcoded base address of nand")

Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com>
Link: https://lore.kernel.org/r/20240306033404.18537-1-venkatesh.abbarapu@amd.com
Signed-off-by: Michal Simek <michal.simek@amd.com>

mtd: nand: arasan: Print warning for unsupported ecc modes

Currently only hw ecc is supported in U-Boot. If any other ecc mode is
given in DT, it simply through an error. So better print
what is being done.

Revert this patch once soft ecc support is fixed in future.

Signed-off-by: Ashok Reddy Soma <ashok.reddy.soma@amd.com>
Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com>
Link: https://lore.kernel.org/r/20240306032703.17508-1-venkatesh.abbarapu@amd.com
Signed-off-by: Michal Simek <michal.simek@amd.com>

common: Drop linux/printk.h from common header

This old patch was marked as deferred. Bring it back to life, to continue
towards the removal of common.h

Move this out of the common header and include it only where needed.

Signed-off-by: Simon Glass <sjg@chromium.org>

drivers: use dev_read_addr_ptr when cast to pointer

The fdt_addr_t and phys_addr_t size have been decoupled. A 32bit CPU
can expect 64-bit data from the device tree parser, so use
dev_read_addr_ptr instead of the dev_read_addr function in the
various files in the drivers directory that cast to a pointer.
As we are there also streamline the error response to -EINVAL on return.

Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

mtd: nand: arasan: Set ofnode value

Ofnode value is not set, so all the DT properties are not being read
and due to this default values are being used.

Find nand node and set chip->flash_node value.

Signed-off-by: Ashok Reddy Soma <ashok.reddy.soma@amd.com>
Link: https://lore.kernel.org/r/20230224050709.30014-3-ashok.reddy.soma@amd.com
Signed-off-by: Michal Simek <michal.simek@amd.com>

mtd: nand: arasan: Remove hardcoded bbt option

Bad block table option is hardcoded to read from flash with
NAND_BBT_USE_FLASH option. This decision should be done based on DT
property. Remove this hardcoding, to be able to use DT property.

Signed-off-by: Ashok Reddy Soma <ashok.reddy.soma@amd.com>
Link: https://lore.kernel.org/r/20230224050709.30014-2-ashok.reddy.soma@amd.com
Signed-off-by: Michal Simek <michal.simek@amd.com>

dm: Rename DM_GET_DRIVER() to DM_DRIVER_GET()

In the spirit of using the same base name for all of these related macros,
rename this to have the operation at the end. This is not widely used so
the impact is fairly small.

Signed-off-by: Simon Glass <sjg@chromium.org>

dm: treewide: Rename auto_alloc_size members to be shorter

This construct is quite long-winded. In earlier days it made some sense
since auto-allocation was a strange concept. But with driver model now
used pretty universally, we can shorten this to 'auto'. This reduces
verbosity and makes it easier to read.

Coincidentally it also ensures that every declaration is on one line,
thus making dtoc's job easier.

Signed-off-by: Simon Glass <sjg@chromium.org>

xilinx: drivers: Use '_' instead of '-' in driver name

The most of drivers are using '_' instead of '-' in driver name. That's why
sync up these names to be aligned. It looks quite bad to see both in use.
It is visible via dm tree command.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

common: Drop linux/delay.h from common header

Move this uncommon header out of the common header.

Signed-off-by: Simon Glass <sjg@chromium.org>

mtd: nand: Fix on-die ecc issues in arasan_nfc driver

Fixed wrong enumeration of nand_config structure. Added chip select
function before reading the nand chip for maf/dev id's, without this
unable to access id's from some of the micron chips. Also added a
print statement to identify if a nand flash is using on-die ecc.

Signed-off-by: T Karthik Reddy <t.karthik.reddy@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

mtd: nand: Remove hardcoded base address of nand

Remove hardcoded base address of nand and replace it with the
value taken from device tree. Remove base address from header
file too.

Signed-off-by: Ashok Reddy Soma <ashok.reddy.soma@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

mtd: nand: Move arasan nand driver to driver model

Make changes to arasan nand driver to move it to driver model.
Select DM_MTD if arasan nand driver is selected.

Signed-off-by: Ashok Reddy Soma <ashok.reddy.soma@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

mtd: nand: arasan_nfc: Add support for nand multi chip select

This patch adds support for nand multi chip select.
Also adding CONFIG_SYS_NAND_MAX_CHIPS to Kconfig to specify maximum number
of nand chips.

Signed-off-by: Tummala Karthik Reddy <t.karthik.reddy@xilinx.com>
Signed-off-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

mtd: nand: Arasan: Add subpage configuration support

Add support for disabling subpage write support via
CONFIG_SYS_NAND_NO_SUBPAGE_WRITE.

Currently the Linux Arasan driver does not support subpage writes and in
case of running UBI and accessing the same UBI volume from both U-Boot
and Linux it is required to have the same subpage write configuration
else the location of the UBI headers (EC + VID) will be misaligned
(subpage vs page) and incompatible. Hence the need for disabling
subpage write support in the U-Boot Arasan NAND driver.

Signed-off-by: Martin Lund <malu@gomspace.com>
Acked-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

Revert "Merge patch series "arm: dts: am62-beagleplay: Fix Beagleplay Ethernet""

When bringing in the series 'arm: dts: am62-beagleplay: Fix Beagleplay
Ethernet"' I failed to notice that b4 noticed it was based on next and
so took that as the base commit and merged that part of next to master.

This reverts commit c8ffd1356d42223cbb8c86280a083cc3c93e6426, reversing
changes made to 2ee6f3a5f7550de3599faef9704e166e5dcace35.

Reported-by: Jonas Karlman <jonas@kwiboo.se>
Signed-off-by: Tom Rini <trini@konsulko.com>

mtd: Remove <common.h> and add needed includes

Remove <common.h> from this driver directory and when needed
add missing include files directly.

Reviewed-by: William Zhang <william.zhang@broadcom.com>
Signed-off-by: Tom Rini <trini@konsulko.com>

mtd: nand: arasan: Fix the crash caused by use after free

The below exception observed on QEMU, as it doesn't support
NAND controller.

"Synchronous Abort" handler, esr 0x96000005, far 0x17acfc878
elr: 000000000803ad40 lr : 000000000805f438 (reloc)
elr: 000000007fcb4d40 lr : 000000007fcd9438
x0 : 000000007bbfc880 x1 : 00000000ff100000
x2 : 000000007fcf059c x3 : 000000007bbfc870
x4 : 000000007fd9a388 x5 : 000000017acfc870
x6 : 0000000000000000 x7 : 000000007bbfd0e0
x8 : 0000000000003dd4 x9 : 000000007bbeec0c
x10: 0000000000000001 x11: 0000000000003f8c
x12: 000000007bbeecfc x13: 000000007bbeeeb0
x14: 000000007bbeeeb0 x15: 000000007bbee474
x16: 000000007fcef18c x17: 0000000000000000
x18: 000000007bbf9d70 x19: 000000007bbfc888
x20: 000000007bbfc870 x21: 000000007fd68ddb
x22: 00000000ffffffed x23: 000000007bbfc878
x24: 0000000000000000 x25: 0000000000000000
x26: 0000000000000000 x27: 0000000000000000
x28: 0000000000000000 x29: 000000007bbeed10

Code: 927ff8c1 924000c6 8b010065 f9400887 (f94004a2)
Resetting CPU ...

The crash is caused by the use after free.
Updating the correct return codes rather than hardcoding.
Fixes: 3dd0f8cccd6d ("mtd: nand: Remove hardcoded base address of nand")

Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com>
Link: https://lore.kernel.org/r/20240306033404.18537-1-venkatesh.abbarapu@amd.com
Signed-off-by: Michal Simek <michal.simek@amd.com>

mtd: nand: arasan: Print warning for unsupported ecc modes

Currently only hw ecc is supported in U-Boot. If any other ecc mode is
given in DT, it simply through an error. So better print
what is being done.

Revert this patch once soft ecc support is fixed in future.

Signed-off-by: Ashok Reddy Soma <ashok.reddy.soma@amd.com>
Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com>
Link: https://lore.kernel.org/r/20240306032703.17508-1-venkatesh.abbarapu@amd.com
Signed-off-by: Michal Simek <michal.simek@amd.com>

common: Drop linux/printk.h from common header

This old patch was marked as deferred. Bring it back to life, to continue
towards the removal of common.h

Move this out of the common header and include it only where needed.

Signed-off-by: Simon Glass <sjg@chromium.org>

drivers: use dev_read_addr_ptr when cast to pointer

The fdt_addr_t and phys_addr_t size have been decoupled. A 32bit CPU
can expect 64-bit data from the device tree parser, so use
dev_read_addr_ptr instead of the dev_read_addr function in the
various files in the drivers directory that cast to a pointer.
As we are there also streamline the error response to -EINVAL on return.

Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

mtd: nand: arasan: Set ofnode value

Ofnode value is not set, so all the DT properties are not being read
and due to this default values are being used.

Find nand node and set chip->flash_node value.

Signed-off-by: Ashok Reddy Soma <ashok.reddy.soma@amd.com>
Link: https://lore.kernel.org/r/20230224050709.30014-3-ashok.reddy.soma@amd.com
Signed-off-by: Michal Simek <michal.simek@amd.com>

mtd: nand: arasan: Remove hardcoded bbt option

Bad block table option is hardcoded to read from flash with
NAND_BBT_USE_FLASH option. This decision should be done based on DT
property. Remove this hardcoding, to be able to use DT property.

Signed-off-by: Ashok Reddy Soma <ashok.reddy.soma@amd.com>
Link: https://lore.kernel.org/r/20230224050709.30014-2-ashok.reddy.soma@amd.com
Signed-off-by: Michal Simek <michal.simek@amd.com>

dm: Rename DM_GET_DRIVER() to DM_DRIVER_GET()

In the spirit of using the same base name for all of these related macros,
rename this to have the operation at the end. This is not widely used so
the impact is fairly small.

Signed-off-by: Simon Glass <sjg@chromium.org>

dm: treewide: Rename auto_alloc_size members to be shorter

This construct is quite long-winded. In earlier days it made some sense
since auto-allocation was a strange concept. But with driver model now
used pretty universally, we can shorten this to 'auto'. This reduces
verbosity and makes it easier to read.

Coincidentally it also ensures that every declaration is on one line,
thus making dtoc's job easier.

Signed-off-by: Simon Glass <sjg@chromium.org>

xilinx: drivers: Use '_' instead of '-' in driver name

The most of drivers are using '_' instead of '-' in driver name. That's why
sync up these names to be aligned. It looks quite bad to see both in use.
It is visible via dm tree command.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

common: Drop linux/delay.h from common header

Move this uncommon header out of the common header.

Signed-off-by: Simon Glass <sjg@chromium.org>

mtd: nand: Fix on-die ecc issues in arasan_nfc driver

Fixed wrong enumeration of nand_config structure. Added chip select
function before reading the nand chip for maf/dev id's, without this
unable to access id's from some of the micron chips. Also added a
print statement to identify if a nand flash is using on-die ecc.

Signed-off-by: T Karthik Reddy <t.karthik.reddy@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

mtd: nand: Remove hardcoded base address of nand

Remove hardcoded base address of nand and replace it with the
value taken from device tree. Remove base address from header
file too.

Signed-off-by: Ashok Reddy Soma <ashok.reddy.soma@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

mtd: nand: Move arasan nand driver to driver model

Make changes to arasan nand driver to move it to driver model.
Select DM_MTD if arasan nand driver is selected.

Signed-off-by: Ashok Reddy Soma <ashok.reddy.soma@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

mtd: nand: arasan_nfc: Add support for nand multi chip select

This patch adds support for nand multi chip select.
Also adding CONFIG_SYS_NAND_MAX_CHIPS to Kconfig to specify maximum number
of nand chips.

Signed-off-by: Tummala Karthik Reddy <t.karthik.reddy@xilinx.com>
Signed-off-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

mtd: nand: Arasan: Add subpage configuration support

Add support for disabling subpage write support via
CONFIG_SYS_NAND_NO_SUBPAGE_WRITE.

Currently the Linux Arasan driver does not support subpage writes and in
case of running UBI and accessing the same UBI volume from both U-Boot
and Linux it is required to have the same subpage write configuration
else the location of the UBI headers (EC + VID) will be misaligned
(subpage vs page) and incompatible. Hence the need for disabling
subpage write support in the U-Boot Arasan NAND driver.

Signed-off-by: Martin Lund <malu@gomspace.com>
Acked-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

Revert "Merge patch series "arm: dts: am62-beagleplay: Fix Beagleplay Ethernet""

When bringing in the series 'arm: dts: am62-beagleplay: Fix Beagleplay
Ethernet"' I failed to notice that b4 noticed it was based on next and
so took that as the base commit and merged that part of next to master.

This reverts commit c8ffd1356d42223cbb8c86280a083cc3c93e6426, reversing
changes made to 2ee6f3a5f7550de3599faef9704e166e5dcace35.

Reported-by: Jonas Karlman <jonas@kwiboo.se>
Signed-off-by: Tom Rini <trini@konsulko.com>

mtd: Remove <common.h> and add needed includes

Remove <common.h> from this driver directory and when needed
add missing include files directly.

Reviewed-by: William Zhang <william.zhang@broadcom.com>
Signed-off-by: Tom Rini <trini@konsulko.com>

mtd: nand: arasan: Fix the crash caused by use after free

The below exception observed on QEMU, as it doesn't support
NAND controller.

"Synchronous Abort" handler, esr 0x96000005, far 0x17acfc878
elr: 000000000803ad40 lr : 000000000805f438 (reloc)
elr: 000000007fcb4d40 lr : 000000007fcd9438
x0 : 000000007bbfc880 x1 : 00000000ff100000
x2 : 000000007fcf059c x3 : 000000007bbfc870
x4 : 000000007fd9a388 x5 : 000000017acfc870
x6 : 0000000000000000 x7 : 000000007bbfd0e0
x8 : 0000000000003dd4 x9 : 000000007bbeec0c
x10: 0000000000000001 x11: 0000000000003f8c
x12: 000000007bbeecfc x13: 000000007bbeeeb0
x14: 000000007bbeeeb0 x15: 000000007bbee474
x16: 000000007fcef18c x17: 0000000000000000
x18: 000000007bbf9d70 x19: 000000007bbfc888
x20: 000000007bbfc870 x21: 000000007fd68ddb
x22: 00000000ffffffed x23: 000000007bbfc878
x24: 0000000000000000 x25: 0000000000000000
x26: 0000000000000000 x27: 0000000000000000
x28: 0000000000000000 x29: 000000007bbeed10

Code: 927ff8c1 924000c6 8b010065 f9400887 (f94004a2)
Resetting CPU ...

The crash is caused by the use after free.
Updating the correct return codes rather than hardcoding.
Fixes: 3dd0f8cccd6d ("mtd: nand: Remove hardcoded base address of nand")

Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com>
Link: https://lore.kernel.org/r/20240306033404.18537-1-venkatesh.abbarapu@amd.com
Signed-off-by: Michal Simek <michal.simek@amd.com>

mtd: nand: arasan: Print warning for unsupported ecc modes

Currently only hw ecc is supported in U-Boot. If any other ecc mode is
given in DT, it simply through an error. So better print
what is being done.

Revert this patch once soft ecc support is fixed in future.

Signed-off-by: Ashok Reddy Soma <ashok.reddy.soma@amd.com>
Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com>
Link: https://lore.kernel.org/r/20240306032703.17508-1-venkatesh.abbarapu@amd.com
Signed-off-by: Michal Simek <michal.simek@amd.com>

common: Drop linux/printk.h from common header

This old patch was marked as deferred. Bring it back to life, to continue
towards the removal of common.h

Move this out of the common header and include it only where needed.

Signed-off-by: Simon Glass <sjg@chromium.org>

drivers: use dev_read_addr_ptr when cast to pointer

The fdt_addr_t and phys_addr_t size have been decoupled. A 32bit CPU
can expect 64-bit data from the device tree parser, so use
dev_read_addr_ptr instead of the dev_read_addr function in the
various files in the drivers directory that cast to a pointer.
As we are there also streamline the error response to -EINVAL on return.

Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

mtd: nand: arasan: Set ofnode value

Ofnode value is not set, so all the DT properties are not being read
and due to this default values are being used.

Find nand node and set chip->flash_node value.

Signed-off-by: Ashok Reddy Soma <ashok.reddy.soma@amd.com>
Link: https://lore.kernel.org/r/20230224050709.30014-3-ashok.reddy.soma@amd.com
Signed-off-by: Michal Simek <michal.simek@amd.com>

mtd: nand: arasan: Remove hardcoded bbt option

Bad block table option is hardcoded to read from flash with
NAND_BBT_USE_FLASH option. This decision should be done based on DT
property. Remove this hardcoding, to be able to use DT property.

Signed-off-by: Ashok Reddy Soma <ashok.reddy.soma@amd.com>
Link: https://lore.kernel.org/r/20230224050709.30014-2-ashok.reddy.soma@amd.com
Signed-off-by: Michal Simek <michal.simek@amd.com>

dm: Rename DM_GET_DRIVER() to DM_DRIVER_GET()

In the spirit of using the same base name for all of these related macros,
rename this to have the operation at the end. This is not widely used so
the impact is fairly small.

Signed-off-by: Simon Glass <sjg@chromium.org>

dm: treewide: Rename auto_alloc_size members to be shorter

This construct is quite long-winded. In earlier days it made some sense
since auto-allocation was a strange concept. But with driver model now
used pretty universally, we can shorten this to 'auto'. This reduces
verbosity and makes it easier to read.

Coincidentally it also ensures that every declaration is on one line,
thus making dtoc's job easier.

Signed-off-by: Simon Glass <sjg@chromium.org>

xilinx: drivers: Use '_' instead of '-' in driver name

The most of drivers are using '_' instead of '-' in driver name. That's why
sync up these names to be aligned. It looks quite bad to see both in use.
It is visible via dm tree command.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

common: Drop linux/delay.h from common header

Move this uncommon header out of the common header.

Signed-off-by: Simon Glass <sjg@chromium.org>

mtd: nand: Fix on-die ecc issues in arasan_nfc driver

Fixed wrong enumeration of nand_config structure. Added chip select
function before reading the nand chip for maf/dev id's, without this
unable to access id's from some of the micron chips. Also added a
print statement to identify if a nand flash is using on-die ecc.

Signed-off-by: T Karthik Reddy <t.karthik.reddy@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

mtd: nand: Remove hardcoded base address of nand

Remove hardcoded base address of nand and replace it with the
value taken from device tree. Remove base address from header
file too.

Signed-off-by: Ashok Reddy Soma <ashok.reddy.soma@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

mtd: nand: Move arasan nand driver to driver model

Make changes to arasan nand driver to move it to driver model.
Select DM_MTD if arasan nand driver is selected.

Signed-off-by: Ashok Reddy Soma <ashok.reddy.soma@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

mtd: nand: arasan_nfc: Add support for nand multi chip select

This patch adds support for nand multi chip select.
Also adding CONFIG_SYS_NAND_MAX_CHIPS to Kconfig to specify maximum number
of nand chips.

Signed-off-by: Tummala Karthik Reddy <t.karthik.reddy@xilinx.com>
Signed-off-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

mtd: nand: Arasan: Add subpage configuration support

Add support for disabling subpage write support via
CONFIG_SYS_NAND_NO_SUBPAGE_WRITE.

Currently the Linux Arasan driver does not support subpage writes and in
case of running UBI and accessing the same UBI volume from both U-Boot
and Linux it is required to have the same subpage write configuration
else the location of the UBI headers (EC + VID) will be misaligned
(subpage vs page) and incompatible. Hence the need for disabling
subpage write support in the U-Boot Arasan NAND driver.

Signed-off-by: Martin Lund <malu@gomspace.com>
Acked-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

Revert "Merge patch series "arm: dts: am62-beagleplay: Fix Beagleplay Ethernet""

When bringing in the series 'arm: dts: am62-beagleplay: Fix Beagleplay
Ethernet"' I failed to notice that b4 noticed it was based on next and
so took that as the base commit and merged that part of next to master.

This reverts commit c8ffd1356d42223cbb8c86280a083cc3c93e6426, reversing
changes made to 2ee6f3a5f7550de3599faef9704e166e5dcace35.

Reported-by: Jonas Karlman <jonas@kwiboo.se>
Signed-off-by: Tom Rini <trini@konsulko.com>

mtd: Remove <common.h> and add needed includes

Remove <common.h> from this driver directory and when needed
add missing include files directly.

Reviewed-by: William Zhang <william.zhang@broadcom.com>
Signed-off-by: Tom Rini <trini@konsulko.com>

mtd: nand: arasan: Fix the crash caused by use after free

The below exception observed on QEMU, as it doesn't support
NAND controller.

"Synchronous Abort" handler, esr 0x96000005, far 0x17acfc878
elr: 000000000803ad40 lr : 000000000805f438 (reloc)
elr: 000000007fcb4d40 lr : 000000007fcd9438
x0 : 000000007bbfc880 x1 : 00000000ff100000
x2 : 000000007fcf059c x3 : 000000007bbfc870
x4 : 000000007fd9a388 x5 : 000000017acfc870
x6 : 0000000000000000 x7 : 000000007bbfd0e0
x8 : 0000000000003dd4 x9 : 000000007bbeec0c
x10: 0000000000000001 x11: 0000000000003f8c
x12: 000000007bbeecfc x13: 000000007bbeeeb0
x14: 000000007bbeeeb0 x15: 000000007bbee474
x16: 000000007fcef18c x17: 0000000000000000
x18: 000000007bbf9d70 x19: 000000007bbfc888
x20: 000000007bbfc870 x21: 000000007fd68ddb
x22: 00000000ffffffed x23: 000000007bbfc878
x24: 0000000000000000 x25: 0000000000000000
x26: 0000000000000000 x27: 0000000000000000
x28: 0000000000000000 x29: 000000007bbeed10

Code: 927ff8c1 924000c6 8b010065 f9400887 (f94004a2)
Resetting CPU ...

The crash is caused by the use after free.
Updating the correct return codes rather than hardcoding.
Fixes: 3dd0f8cccd6d ("mtd: nand: Remove hardcoded base address of nand")

Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com>
Link: https://lore.kernel.org/r/20240306033404.18537-1-venkatesh.abbarapu@amd.com
Signed-off-by: Michal Simek <michal.simek@amd.com>

mtd: nand: arasan: Print warning for unsupported ecc modes

Currently only hw ecc is supported in U-Boot. If any other ecc mode is
given in DT, it simply through an error. So better print
what is being done.

Revert this patch once soft ecc support is fixed in future.

Signed-off-by: Ashok Reddy Soma <ashok.reddy.soma@amd.com>
Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com>
Link: https://lore.kernel.org/r/20240306032703.17508-1-venkatesh.abbarapu@amd.com
Signed-off-by: Michal Simek <michal.simek@amd.com>

common: Drop linux/printk.h from common header

This old patch was marked as deferred. Bring it back to life, to continue
towards the removal of common.h

Move this out of the common header and include it only where needed.

Signed-off-by: Simon Glass <sjg@chromium.org>

drivers: use dev_read_addr_ptr when cast to pointer

The fdt_addr_t and phys_addr_t size have been decoupled. A 32bit CPU
can expect 64-bit data from the device tree parser, so use
dev_read_addr_ptr instead of the dev_read_addr function in the
various files in the drivers directory that cast to a pointer.
As we are there also streamline the error response to -EINVAL on return.

Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

mtd: nand: arasan: Set ofnode value

Ofnode value is not set, so all the DT properties are not being read
and due to this default values are being used.

Find nand node and set chip->flash_node value.

Signed-off-by: Ashok Reddy Soma <ashok.reddy.soma@amd.com>
Link: https://lore.kernel.org/r/20230224050709.30014-3-ashok.reddy.soma@amd.com
Signed-off-by: Michal Simek <michal.simek@amd.com>

mtd: nand: arasan: Remove hardcoded bbt option

Bad block table option is hardcoded to read from flash with
NAND_BBT_USE_FLASH option. This decision should be done based on DT
property. Remove this hardcoding, to be able to use DT property.

Signed-off-by: Ashok Reddy Soma <ashok.reddy.soma@amd.com>
Link: https://lore.kernel.org/r/20230224050709.30014-2-ashok.reddy.soma@amd.com
Signed-off-by: Michal Simek <michal.simek@amd.com>

dm: Rename DM_GET_DRIVER() to DM_DRIVER_GET()

In the spirit of using the same base name for all of these related macros,
rename this to have the operation at the end. This is not widely used so
the impact is fairly small.

Signed-off-by: Simon Glass <sjg@chromium.org>

dm: treewide: Rename auto_alloc_size members to be shorter

This construct is quite long-winded. In earlier days it made some sense
since auto-allocation was a strange concept. But with driver model now
used pretty universally, we can shorten this to 'auto'. This reduces
verbosity and makes it easier to read.

Coincidentally it also ensures that every declaration is on one line,
thus making dtoc's job easier.

Signed-off-by: Simon Glass <sjg@chromium.org>

xilinx: drivers: Use '_' instead of '-' in driver name

The most of drivers are using '_' instead of '-' in driver name. That's why
sync up these names to be aligned. It looks quite bad to see both in use.
It is visible via dm tree command.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

common: Drop linux/delay.h from common header

Move this uncommon header out of the common header.

Signed-off-by: Simon Glass <sjg@chromium.org>

mtd: nand: Fix on-die ecc issues in arasan_nfc driver

Fixed wrong enumeration of nand_config structure. Added chip select
function before reading the nand chip for maf/dev id's, without this
unable to access id's from some of the micron chips. Also added a
print statement to identify if a nand flash is using on-die ecc.

Signed-off-by: T Karthik Reddy <t.karthik.reddy@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

mtd: nand: Remove hardcoded base address of nand

Remove hardcoded base address of nand and replace it with the
value taken from device tree. Remove base address from header
file too.

Signed-off-by: Ashok Reddy Soma <ashok.reddy.soma@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

mtd: nand: Move arasan nand driver to driver model

Make changes to arasan nand driver to move it to driver model.
Select DM_MTD if arasan nand driver is selected.

Signed-off-by: Ashok Reddy Soma <ashok.reddy.soma@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

mtd: nand: arasan_nfc: Add support for nand multi chip select

This patch adds support for nand multi chip select.
Also adding CONFIG_SYS_NAND_MAX_CHIPS to Kconfig to specify maximum number
of nand chips.

Signed-off-by: Tummala Karthik Reddy <t.karthik.reddy@xilinx.com>
Signed-off-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

mtd: nand: Arasan: Add subpage configuration support

Add support for disabling subpage write support via
CONFIG_SYS_NAND_NO_SUBPAGE_WRITE.

Currently the Linux Arasan driver does not support subpage writes and in
case of running UBI and accessing the same UBI volume from both U-Boot
and Linux it is required to have the same subpage write configuration
else the location of the UBI headers (EC + VID) will be misaligned
(subpage vs page) and incompatible. Hence the need for disabling
subpage write support in the U-Boot Arasan NAND driver.

Signed-off-by: Martin Lund <malu@gomspace.com>
Acked-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

Revert "Merge patch series "arm: dts: am62-beagleplay: Fix Beagleplay Ethernet""

When bringing in the series 'arm: dts: am62-beagleplay: Fix Beagleplay
Ethernet"' I failed to notice that b4 noticed it was based on next and
so took that as the base commit and merged that part of next to master.

This reverts commit c8ffd1356d42223cbb8c86280a083cc3c93e6426, reversing
changes made to 2ee6f3a5f7550de3599faef9704e166e5dcace35.

Reported-by: Jonas Karlman <jonas@kwiboo.se>
Signed-off-by: Tom Rini <trini@konsulko.com>

mtd: Remove <common.h> and add needed includes

Remove <common.h> from this driver directory and when needed
add missing include files directly.

Reviewed-by: William Zhang <william.zhang@broadcom.com>
Signed-off-by: Tom Rini <trini@konsulko.com>

mtd: nand: arasan: Fix the crash caused by use after free

The below exception observed on QEMU, as it doesn't support
NAND controller.

"Synchronous Abort" handler, esr 0x96000005, far 0x17acfc878
elr: 000000000803ad40 lr : 000000000805f438 (reloc)
elr: 000000007fcb4d40 lr : 000000007fcd9438
x0 : 000000007bbfc880 x1 : 00000000ff100000
x2 : 000000007fcf059c x3 : 000000007bbfc870
x4 : 000000007fd9a388 x5 : 000000017acfc870
x6 : 0000000000000000 x7 : 000000007bbfd0e0
x8 : 0000000000003dd4 x9 : 000000007bbeec0c
x10: 0000000000000001 x11: 0000000000003f8c
x12: 000000007bbeecfc x13: 000000007bbeeeb0
x14: 000000007bbeeeb0 x15: 000000007bbee474
x16: 000000007fcef18c x17: 0000000000000000
x18: 000000007bbf9d70 x19: 000000007bbfc888
x20: 000000007bbfc870 x21: 000000007fd68ddb
x22: 00000000ffffffed x23: 000000007bbfc878
x24: 0000000000000000 x25: 0000000000000000
x26: 0000000000000000 x27: 0000000000000000
x28: 0000000000000000 x29: 000000007bbeed10

Code: 927ff8c1 924000c6 8b010065 f9400887 (f94004a2)
Resetting CPU ...

The crash is caused by the use after free.
Updating the correct return codes rather than hardcoding.
Fixes: 3dd0f8cccd6d ("mtd: nand: Remove hardcoded base address of nand")

Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com>
Link: https://lore.kernel.org/r/20240306033404.18537-1-venkatesh.abbarapu@amd.com
Signed-off-by: Michal Simek <michal.simek@amd.com>

mtd: nand: arasan: Print warning for unsupported ecc modes

Currently only hw ecc is supported in U-Boot. If any other ecc mode is
given in DT, it simply through an error. So better print
what is being done.

Revert this patch once soft ecc support is fixed in future.

Signed-off-by: Ashok Reddy Soma <ashok.reddy.soma@amd.com>
Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com>
Link: https://lore.kernel.org/r/20240306032703.17508-1-venkatesh.abbarapu@amd.com
Signed-off-by: Michal Simek <michal.simek@amd.com>

common: Drop linux/printk.h from common header

This old patch was marked as deferred. Bring it back to life, to continue
towards the removal of common.h

Move this out of the common header and include it only where needed.

Signed-off-by: Simon Glass <sjg@chromium.org>

drivers: use dev_read_addr_ptr when cast to pointer

The fdt_addr_t and phys_addr_t size have been decoupled. A 32bit CPU
can expect 64-bit data from the device tree parser, so use
dev_read_addr_ptr instead of the dev_read_addr function in the
various files in the drivers directory that cast to a pointer.
As we are there also streamline the error response to -EINVAL on return.

Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

mtd: nand: arasan: Set ofnode value

Ofnode value is not set, so all the DT properties are not being read
and due to this default values are being used.

Find nand node and set chip->flash_node value.

Signed-off-by: Ashok Reddy Soma <ashok.reddy.soma@amd.com>
Link: https://lore.kernel.org/r/20230224050709.30014-3-ashok.reddy.soma@amd.com
Signed-off-by: Michal Simek <michal.simek@amd.com>

mtd: nand: arasan: Remove hardcoded bbt option

Bad block table option is hardcoded to read from flash with
NAND_BBT_USE_FLASH option. This decision should be done based on DT
property. Remove this hardcoding, to be able to use DT property.

Signed-off-by: Ashok Reddy Soma <ashok.reddy.soma@amd.com>
Link: https://lore.kernel.org/r/20230224050709.30014-2-ashok.reddy.soma@amd.com
Signed-off-by: Michal Simek <michal.simek@amd.com>

dm: Rename DM_GET_DRIVER() to DM_DRIVER_GET()

In the spirit of using the same base name for all of these related macros,
rename this to have the operation at the end. This is not widely used so
the impact is fairly small.

Signed-off-by: Simon Glass <sjg@chromium.org>

dm: treewide: Rename auto_alloc_size members to be shorter

This construct is quite long-winded. In earlier days it made some sense
since auto-allocation was a strange concept. But with driver model now
used pretty universally, we can shorten this to 'auto'. This reduces
verbosity and makes it easier to read.

Coincidentally it also ensures that every declaration is on one line,
thus making dtoc's job easier.

Signed-off-by: Simon Glass <sjg@chromium.org>

xilinx: drivers: Use '_' instead of '-' in driver name

The most of drivers are using '_' instead of '-' in driver name. That's why
sync up these names to be aligned. It looks quite bad to see both in use.
It is visible via dm tree command.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

common: Drop linux/delay.h from common header

Move this uncommon header out of the common header.

Signed-off-by: Simon Glass <sjg@chromium.org>

mtd: nand: Fix on-die ecc issues in arasan_nfc driver

Fixed wrong enumeration of nand_config structure. Added chip select
function before reading the nand chip for maf/dev id's, without this
unable to access id's from some of the micron chips. Also added a
print statement to identify if a nand flash is using on-die ecc.

Signed-off-by: T Karthik Reddy <t.karthik.reddy@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

mtd: nand: Remove hardcoded base address of nand

Remove hardcoded base address of nand and replace it with the
value taken from device tree. Remove base address from header
file too.

Signed-off-by: Ashok Reddy Soma <ashok.reddy.soma@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

mtd: nand: Move arasan nand driver to driver model

Make changes to arasan nand driver to move it to driver model.
Select DM_MTD if arasan nand driver is selected.

Signed-off-by: Ashok Reddy Soma <ashok.reddy.soma@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

mtd: nand: arasan_nfc: Add support for nand multi chip select

This patch adds support for nand multi chip select.
Also adding CONFIG_SYS_NAND_MAX_CHIPS to Kconfig to specify maximum number
of nand chips.

Signed-off-by: Tummala Karthik Reddy <t.karthik.reddy@xilinx.com>
Signed-off-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

mtd: nand: Arasan: Add subpage configuration support

Add support for disabling subpage write support via
CONFIG_SYS_NAND_NO_SUBPAGE_WRITE.

Currently the Linux Arasan driver does not support subpage writes and in
case of running UBI and accessing the same UBI volume from both U-Boot
and Linux it is required to have the same subpage write configuration
else the location of the UBI headers (EC + VID) will be misaligned
(subpage vs page) and incompatible. Hence the need for disabling
subpage write support in the U-Boot Arasan NAND driver.

Signed-off-by: Martin Lund <malu@gomspace.com>
Acked-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

Revert "Merge patch series "arm: dts: am62-beagleplay: Fix Beagleplay Ethernet""

When bringing in the series 'arm: dts: am62-beagleplay: Fix Beagleplay
Ethernet"' I failed to notice that b4 noticed it was based on next and
so took that as the base commit and merged that part of next to master.

This reverts commit c8ffd1356d42223cbb8c86280a083cc3c93e6426, reversing
changes made to 2ee6f3a5f7550de3599faef9704e166e5dcace35.

Reported-by: Jonas Karlman <jonas@kwiboo.se>
Signed-off-by: Tom Rini <trini@konsulko.com>

mtd: Remove <common.h> and add needed includes

Remove <common.h> from this driver directory and when needed
add missing include files directly.

Reviewed-by: William Zhang <william.zhang@broadcom.com>
Signed-off-by: Tom Rini <trini@konsulko.com>

mtd: nand: arasan: Fix the crash caused by use after free

The below exception observed on QEMU, as it doesn't support
NAND controller.

"Synchronous Abort" handler, esr 0x96000005, far 0x17acfc878
elr: 000000000803ad40 lr : 000000000805f438 (reloc)
elr: 000000007fcb4d40 lr : 000000007fcd9438
x0 : 000000007bbfc880 x1 : 00000000ff100000
x2 : 000000007fcf059c x3 : 000000007bbfc870
x4 : 000000007fd9a388 x5 : 000000017acfc870
x6 : 0000000000000000 x7 : 000000007bbfd0e0
x8 : 0000000000003dd4 x9 : 000000007bbeec0c
x10: 0000000000000001 x11: 0000000000003f8c
x12: 000000007bbeecfc x13: 000000007bbeeeb0
x14: 000000007bbeeeb0 x15: 000000007bbee474
x16: 000000007fcef18c x17: 0000000000000000
x18: 000000007bbf9d70 x19: 000000007bbfc888
x20: 000000007bbfc870 x21: 000000007fd68ddb
x22: 00000000ffffffed x23: 000000007bbfc878
x24: 0000000000000000 x25: 0000000000000000
x26: 0000000000000000 x27: 0000000000000000
x28: 0000000000000000 x29: 000000007bbeed10

Code: 927ff8c1 924000c6 8b010065 f9400887 (f94004a2)
Resetting CPU ...

The crash is caused by the use after free.
Updating the correct return codes rather than hardcoding.
Fixes: 3dd0f8cccd6d ("mtd: nand: Remove hardcoded base address of nand")

Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com>
Link: https://lore.kernel.org/r/20240306033404.18537-1-venkatesh.abbarapu@amd.com
Signed-off-by: Michal Simek <michal.simek@amd.com>

mtd: nand: arasan: Print warning for unsupported ecc modes

Currently only hw ecc is supported in U-Boot. If any other ecc mode is
given in DT, it simply through an error. So better print
what is being done.

Revert this patch once soft ecc support is fixed in future.

Signed-off-by: Ashok Reddy Soma <ashok.reddy.soma@amd.com>
Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com>
Link: https://lore.kernel.org/r/20240306032703.17508-1-venkatesh.abbarapu@amd.com
Signed-off-by: Michal Simek <michal.simek@amd.com>

common: Drop linux/printk.h from common header

This old patch was marked as deferred. Bring it back to life, to continue
towards the removal of common.h

Move this out of the common header and include it only where needed.

Signed-off-by: Simon Glass <sjg@chromium.org>

drivers: use dev_read_addr_ptr when cast to pointer

The fdt_addr_t and phys_addr_t size have been decoupled. A 32bit CPU
can expect 64-bit data from the device tree parser, so use
dev_read_addr_ptr instead of the dev_read_addr function in the
various files in the drivers directory that cast to a pointer.
As we are there also streamline the error response to -EINVAL on return.

Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

mtd: nand: arasan: Set ofnode value

Ofnode value is not set, so all the DT properties are not being read
and due to this default values are being used.

Find nand node and set chip->flash_node value.

Signed-off-by: Ashok Reddy Soma <ashok.reddy.soma@amd.com>
Link: https://lore.kernel.org/r/20230224050709.30014-3-ashok.reddy.soma@amd.com
Signed-off-by: Michal Simek <michal.simek@amd.com>

mtd: nand: arasan: Remove hardcoded bbt option

Bad block table option is hardcoded to read from flash with
NAND_BBT_USE_FLASH option. This decision should be done based on DT
property. Remove this hardcoding, to be able to use DT property.

Signed-off-by: Ashok Reddy Soma <ashok.reddy.soma@amd.com>
Link: https://lore.kernel.org/r/20230224050709.30014-2-ashok.reddy.soma@amd.com
Signed-off-by: Michal Simek <michal.simek@amd.com>

dm: Rename DM_GET_DRIVER() to DM_DRIVER_GET()

In the spirit of using the same base name for all of these related macros,
rename this to have the operation at the end. This is not widely used so
the impact is fairly small.

Signed-off-by: Simon Glass <sjg@chromium.org>

dm: treewide: Rename auto_alloc_size members to be shorter

This construct is quite long-winded. In earlier days it made some sense
since auto-allocation was a strange concept. But with driver model now
used pretty universally, we can shorten this to 'auto'. This reduces
verbosity and makes it easier to read.

Coincidentally it also ensures that every declaration is on one line,
thus making dtoc's job easier.

Signed-off-by: Simon Glass <sjg@chromium.org>

xilinx: drivers: Use '_' instead of '-' in driver name

The most of drivers are using '_' instead of '-' in driver name. That's why
sync up these names to be aligned. It looks quite bad to see both in use.
It is visible via dm tree command.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

common: Drop linux/delay.h from common header

Move this uncommon header out of the common header.

Signed-off-by: Simon Glass <sjg@chromium.org>

mtd: nand: Fix on-die ecc issues in arasan_nfc driver

Fixed wrong enumeration of nand_config structure. Added chip select
function before reading the nand chip for maf/dev id's, without this
unable to access id's from some of the micron chips. Also added a
print statement to identify if a nand flash is using on-die ecc.

Signed-off-by: T Karthik Reddy <t.karthik.reddy@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

mtd: nand: Remove hardcoded base address of nand

Remove hardcoded base address of nand and replace it with the
value taken from device tree. Remove base address from header
file too.

Signed-off-by: Ashok Reddy Soma <ashok.reddy.soma@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

mtd: nand: Move arasan nand driver to driver model

Make changes to arasan nand driver to move it to driver model.
Select DM_MTD if arasan nand driver is selected.

Signed-off-by: Ashok Reddy Soma <ashok.reddy.soma@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

mtd: nand: arasan_nfc: Add support for nand multi chip select

This patch adds support for nand multi chip select.
Also adding CONFIG_SYS_NAND_MAX_CHIPS to Kconfig to specify maximum number
of nand chips.

Signed-off-by: Tummala Karthik Reddy <t.karthik.reddy@xilinx.com>
Signed-off-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

mtd: nand: Arasan: Add subpage configuration support

Add support for disabling subpage write support via
CONFIG_SYS_NAND_NO_SUBPAGE_WRITE.

Currently the Linux Arasan driver does not support subpage writes and in
case of running UBI and accessing the same UBI volume from both U-Boot
and Linux it is required to have the same subpage write configuration
else the location of the UBI headers (EC + VID) will be misaligned
(subpage vs page) and incompatible. Hence the need for disabling
subpage write support in the U-Boot Arasan NAND driver.

Signed-off-by: Martin Lund <malu@gomspace.com>
Acked-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

mtd: Remove <common.h> and add needed includes

Remove <common.h> from this driver directory and when needed
add missing include files directly.

Reviewed-by: William Zhang <william.zhang@broadcom.com>
Signed-off-by: Tom Rini <trini@konsulko.com>

mtd: nand: arasan: Fix the crash caused by use after free

The below exception observed on QEMU, as it doesn't support
NAND controller.

"Synchronous Abort" handler, esr 0x96000005, far 0x17acfc878
elr: 000000000803ad40 lr : 000000000805f438 (reloc)
elr: 000000007fcb4d40 lr : 000000007fcd9438
x0 : 000000007bbfc880 x1 : 00000000ff100000
x2 : 000000007fcf059c x3 : 000000007bbfc870
x4 : 000000007fd9a388 x5 : 000000017acfc870
x6 : 0000000000000000 x7 : 000000007bbfd0e0
x8 : 0000000000003dd4 x9 : 000000007bbeec0c
x10: 0000000000000001 x11: 0000000000003f8c
x12: 000000007bbeecfc x13: 000000007bbeeeb0
x14: 000000007bbeeeb0 x15: 000000007bbee474
x16: 000000007fcef18c x17: 0000000000000000
x18: 000000007bbf9d70 x19: 000000007bbfc888
x20: 000000007bbfc870 x21: 000000007fd68ddb
x22: 00000000ffffffed x23: 000000007bbfc878
x24: 0000000000000000 x25: 0000000000000000
x26: 0000000000000000 x27: 0000000000000000
x28: 0000000000000000 x29: 000000007bbeed10

Code: 927ff8c1 924000c6 8b010065 f9400887 (f94004a2)
Resetting CPU ...

The crash is caused by the use after free.
Updating the correct return codes rather than hardcoding.
Fixes: 3dd0f8cccd6d ("mtd: nand: Remove hardcoded base address of nand")

Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com>
Link: https://lore.kernel.org/r/20240306033404.18537-1-venkatesh.abbarapu@amd.com
Signed-off-by: Michal Simek <michal.simek@amd.com>

mtd: nand: arasan: Print warning for unsupported ecc modes

Currently only hw ecc is supported in U-Boot. If any other ecc mode is
given in DT, it simply through an error. So better print
what is being done.

Revert this patch once soft ecc support is fixed in future.

Signed-off-by: Ashok Reddy Soma <ashok.reddy.soma@amd.com>
Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com>
Link: https://lore.kernel.org/r/20240306032703.17508-1-venkatesh.abbarapu@amd.com
Signed-off-by: Michal Simek <michal.simek@amd.com>

common: Drop linux/printk.h from common header

This old patch was marked as deferred. Bring it back to life, to continue
towards the removal of common.h

Move this out of the common header and include it only where needed.

Signed-off-by: Simon Glass <sjg@chromium.org>

drivers: use dev_read_addr_ptr when cast to pointer

The fdt_addr_t and phys_addr_t size have been decoupled. A 32bit CPU
can expect 64-bit data from the device tree parser, so use
dev_read_addr_ptr instead of the dev_read_addr function in the
various files in the drivers directory that cast to a pointer.
As we are there also streamline the error response to -EINVAL on return.

Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

mtd: nand: arasan: Set ofnode value

Ofnode value is not set, so all the DT properties are not being read
and due to this default values are being used.

Find nand node and set chip->flash_node value.

Signed-off-by: Ashok Reddy Soma <ashok.reddy.soma@amd.com>
Link: https://lore.kernel.org/r/20230224050709.30014-3-ashok.reddy.soma@amd.com
Signed-off-by: Michal Simek <michal.simek@amd.com>

mtd: nand: arasan: Remove hardcoded bbt option

Bad block table option is hardcoded to read from flash with
NAND_BBT_USE_FLASH option. This decision should be done based on DT
property. Remove this hardcoding, to be able to use DT property.

Signed-off-by: Ashok Reddy Soma <ashok.reddy.soma@amd.com>
Link: https://lore.kernel.org/r/20230224050709.30014-2-ashok.reddy.soma@amd.com
Signed-off-by: Michal Simek <michal.simek@amd.com>

dm: Rename DM_GET_DRIVER() to DM_DRIVER_GET()

In the spirit of using the same base name for all of these related macros,
rename this to have the operation at the end. This is not widely used so
the impact is fairly small.

Signed-off-by: Simon Glass <sjg@chromium.org>

dm: treewide: Rename auto_alloc_size members to be shorter

This construct is quite long-winded. In earlier days it made some sense
since auto-allocation was a strange concept. But with driver model now
used pretty universally, we can shorten this to 'auto'. This reduces
verbosity and makes it easier to read.

Coincidentally it also ensures that every declaration is on one line,
thus making dtoc's job easier.

Signed-off-by: Simon Glass <sjg@chromium.org>

xilinx: drivers: Use '_' instead of '-' in driver name

The most of drivers are using '_' instead of '-' in driver name. That's why
sync up these names to be aligned. It looks quite bad to see both in use.
It is visible via dm tree command.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

common: Drop linux/delay.h from common header

Move this uncommon header out of the common header.

Signed-off-by: Simon Glass <sjg@chromium.org>

mtd: nand: Fix on-die ecc issues in arasan_nfc driver

Fixed wrong enumeration of nand_config structure. Added chip select
function before reading the nand chip for maf/dev id's, without this
unable to access id's from some of the micron chips. Also added a
print statement to identify if a nand flash is using on-die ecc.

Signed-off-by: T Karthik Reddy <t.karthik.reddy@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

mtd: nand: Remove hardcoded base address of nand

Remove hardcoded base address of nand and replace it with the
value taken from device tree. Remove base address from header
file too.

Signed-off-by: Ashok Reddy Soma <ashok.reddy.soma@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

mtd: nand: Move arasan nand driver to driver model

Make changes to arasan nand driver to move it to driver model.
Select DM_MTD if arasan nand driver is selected.

Signed-off-by: Ashok Reddy Soma <ashok.reddy.soma@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

mtd: nand: arasan_nfc: Add support for nand multi chip select

This patch adds support for nand multi chip select.
Also adding CONFIG_SYS_NAND_MAX_CHIPS to Kconfig to specify maximum number
of nand chips.

Signed-off-by: Tummala Karthik Reddy <t.karthik.reddy@xilinx.com>
Signed-off-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

mtd: nand: Arasan: Add subpage configuration support

Add support for disabling subpage write support via
CONFIG_SYS_NAND_NO_SUBPAGE_WRITE.

Currently the Linux Arasan driver does not support subpage writes and in
case of running UBI and accessing the same UBI volume from both U-Boot
and Linux it is required to have the same subpage write configuration
else the location of the UBI headers (EC + VID) will be misaligned
(subpage vs page) and incompatible. Hence the need for disabling
subpage write support in the U-Boot Arasan NAND driver.

Signed-off-by: Martin Lund <malu@gomspace.com>
Acked-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

mtd: Remove <common.h> and add needed includes

Remove <common.h> from this driver directory and when needed
add missing include files directly.

Reviewed-by: William Zhang <william.zhang@broadcom.com>
Signed-off-by: Tom Rini <trini@konsulko.com>

mtd: nand: arasan: Fix the crash caused by use after free

The below exception observed on QEMU, as it doesn't support
NAND controller.

"Synchronous Abort" handler, esr 0x96000005, far 0x17acfc878
elr: 000000000803ad40 lr : 000000000805f438 (reloc)
elr: 000000007fcb4d40 lr : 000000007fcd9438
x0 : 000000007bbfc880 x1 : 00000000ff100000
x2 : 000000007fcf059c x3 : 000000007bbfc870
x4 : 000000007fd9a388 x5 : 000000017acfc870
x6 : 0000000000000000 x7 : 000000007bbfd0e0
x8 : 0000000000003dd4 x9 : 000000007bbeec0c
x10: 0000000000000001 x11: 0000000000003f8c
x12: 000000007bbeecfc x13: 000000007bbeeeb0
x14: 000000007bbeeeb0 x15: 000000007bbee474
x16: 000000007fcef18c x17: 0000000000000000
x18: 000000007bbf9d70 x19: 000000007bbfc888
x20: 000000007bbfc870 x21: 000000007fd68ddb
x22: 00000000ffffffed x23: 000000007bbfc878
x24: 0000000000000000 x25: 0000000000000000
x26: 0000000000000000 x27: 0000000000000000
x28: 0000000000000000 x29: 000000007bbeed10

Code: 927ff8c1 924000c6 8b010065 f9400887 (f94004a2)
Resetting CPU ...

The crash is caused by the use after free.
Updating the correct return codes rather than hardcoding.
Fixes: 3dd0f8cccd6d ("mtd: nand: Remove hardcoded base address of nand")

Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com>
Link: https://lore.kernel.org/r/20240306033404.18537-1-venkatesh.abbarapu@amd.com
Signed-off-by: Michal Simek <michal.simek@amd.com>

mtd: nand: arasan: Print warning for unsupported ecc modes

Currently only hw ecc is supported in U-Boot. If any other ecc mode is
given in DT, it simply through an error. So better print
what is being done.

Revert this patch once soft ecc support is fixed in future.

Signed-off-by: Ashok Reddy Soma <ashok.reddy.soma@amd.com>
Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com>
Link: https://lore.kernel.org/r/20240306032703.17508-1-venkatesh.abbarapu@amd.com
Signed-off-by: Michal Simek <michal.simek@amd.com>

common: Drop linux/printk.h from common header

This old patch was marked as deferred. Bring it back to life, to continue
towards the removal of common.h

Move this out of the common header and include it only where needed.

Signed-off-by: Simon Glass <sjg@chromium.org>

drivers: use dev_read_addr_ptr when cast to pointer

The fdt_addr_t and phys_addr_t size have been decoupled. A 32bit CPU
can expect 64-bit data from the device tree parser, so use
dev_read_addr_ptr instead of the dev_read_addr function in the
various files in the drivers directory that cast to a pointer.
As we are there also streamline the error response to -EINVAL on return.

Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

mtd: nand: arasan: Set ofnode value

Ofnode value is not set, so all the DT properties are not being read
and due to this default values are being used.

Find nand node and set chip->flash_node value.

Signed-off-by: Ashok Reddy Soma <ashok.reddy.soma@amd.com>
Link: https://lore.kernel.org/r/20230224050709.30014-3-ashok.reddy.soma@amd.com
Signed-off-by: Michal Simek <michal.simek@amd.com>

mtd: nand: arasan: Remove hardcoded bbt option

Bad block table option is hardcoded to read from flash with
NAND_BBT_USE_FLASH option. This decision should be done based on DT
property. Remove this hardcoding, to be able to use DT property.

Signed-off-by: Ashok Reddy Soma <ashok.reddy.soma@amd.com>
Link: https://lore.kernel.org/r/20230224050709.30014-2-ashok.reddy.soma@amd.com
Signed-off-by: Michal Simek <michal.simek@amd.com>

dm: Rename DM_GET_DRIVER() to DM_DRIVER_GET()

In the spirit of using the same base name for all of these related macros,
rename this to have the operation at the end. This is not widely used so
the impact is fairly small.

Signed-off-by: Simon Glass <sjg@chromium.org>

dm: treewide: Rename auto_alloc_size members to be shorter

This construct is quite long-winded. In earlier days it made some sense
since auto-allocation was a strange concept. But with driver model now
used pretty universally, we can shorten this to 'auto'. This reduces
verbosity and makes it easier to read.

Coincidentally it also ensures that every declaration is on one line,
thus making dtoc's job easier.

Signed-off-by: Simon Glass <sjg@chromium.org>

xilinx: drivers: Use '_' instead of '-' in driver name

The most of drivers are using '_' instead of '-' in driver name. That's why
sync up these names to be aligned. It looks quite bad to see both in use.
It is visible via dm tree command.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

common: Drop linux/delay.h from common header

Move this uncommon header out of the common header.

Signed-off-by: Simon Glass <sjg@chromium.org>

mtd: nand: Fix on-die ecc issues in arasan_nfc driver

Fixed wrong enumeration of nand_config structure. Added chip select
function before reading the nand chip for maf/dev id's, without this
unable to access id's from some of the micron chips. Also added a
print statement to identify if a nand flash is using on-die ecc.

Signed-off-by: T Karthik Reddy <t.karthik.reddy@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

mtd: nand: Remove hardcoded base address of nand

Remove hardcoded base address of nand and replace it with the
value taken from device tree. Remove base address from header
file too.

Signed-off-by: Ashok Reddy Soma <ashok.reddy.soma@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

mtd: nand: Move arasan nand driver to driver model

Make changes to arasan nand driver to move it to driver model.
Select DM_MTD if arasan nand driver is selected.

Signed-off-by: Ashok Reddy Soma <ashok.reddy.soma@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

mtd: nand: arasan_nfc: Add support for nand multi chip select

This patch adds support for nand multi chip select.
Also adding CONFIG_SYS_NAND_MAX_CHIPS to Kconfig to specify maximum number
of nand chips.

Signed-off-by: Tummala Karthik Reddy <t.karthik.reddy@xilinx.com>
Signed-off-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

mtd: nand: Arasan: Add subpage configuration support

Add support for disabling subpage write support via
CONFIG_SYS_NAND_NO_SUBPAGE_WRITE.

Currently the Linux Arasan driver does not support subpage writes and in
case of running UBI and accessing the same UBI volume from both U-Boot
and Linux it is required to have the same subpage write configuration
else the location of the UBI headers (EC + VID) will be misaligned
(subpage vs page) and incompatible. Hence the need for disabling
subpage write support in the U-Boot Arasan NAND driver.

Signed-off-by: Martin Lund <malu@gomspace.com>
Acked-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

mtd: Remove <common.h> and add needed includes

Remove <common.h> from this driver directory and when needed
add missing include files directly.

Reviewed-by: William Zhang <william.zhang@broadcom.com>
Signed-off-by: Tom Rini <trini@konsulko.com>

mtd: nand: arasan: Fix the crash caused by use after free

The below exception observed on QEMU, as it doesn't support
NAND controller.

"Synchronous Abort" handler, esr 0x96000005, far 0x17acfc878
elr: 000000000803ad40 lr : 000000000805f438 (reloc)
elr: 000000007fcb4d40 lr : 000000007fcd9438
x0 : 000000007bbfc880 x1 : 00000000ff100000
x2 : 000000007fcf059c x3 : 000000007bbfc870
x4 : 000000007fd9a388 x5 : 000000017acfc870
x6 : 0000000000000000 x7 : 000000007bbfd0e0
x8 : 0000000000003dd4 x9 : 000000007bbeec0c
x10: 0000000000000001 x11: 0000000000003f8c
x12: 000000007bbeecfc x13: 000000007bbeeeb0
x14: 000000007bbeeeb0 x15: 000000007bbee474
x16: 000000007fcef18c x17: 0000000000000000
x18: 000000007bbf9d70 x19: 000000007bbfc888
x20: 000000007bbfc870 x21: 000000007fd68ddb
x22: 00000000ffffffed x23: 000000007bbfc878
x24: 0000000000000000 x25: 0000000000000000
x26: 0000000000000000 x27: 0000000000000000
x28: 0000000000000000 x29: 000000007bbeed10

Code: 927ff8c1 924000c6 8b010065 f9400887 (f94004a2)
Resetting CPU ...

The crash is caused by the use after free.
Updating the correct return codes rather than hardcoding.
Fixes: 3dd0f8cccd6d ("mtd: nand: Remove hardcoded base address of nand")

Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com>
Link: https://lore.kernel.org/r/20240306033404.18537-1-venkatesh.abbarapu@amd.com
Signed-off-by: Michal Simek <michal.simek@amd.com>

mtd: nand: arasan: Print warning for unsupported ecc modes

Currently only hw ecc is supported in U-Boot. If any other ecc mode is
given in DT, it simply through an error. So better print
what is being done.

Revert this patch once soft ecc support is fixed in future.

Signed-off-by: Ashok Reddy Soma <ashok.reddy.soma@amd.com>
Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com>
Link: https://lore.kernel.org/r/20240306032703.17508-1-venkatesh.abbarapu@amd.com
Signed-off-by: Michal Simek <michal.simek@amd.com>

common: Drop linux/printk.h from common header

This old patch was marked as deferred. Bring it back to life, to continue
towards the removal of common.h

Move this out of the common header and include it only where needed.

Signed-off-by: Simon Glass <sjg@chromium.org>

drivers: use dev_read_addr_ptr when cast to pointer

The fdt_addr_t and phys_addr_t size have been decoupled. A 32bit CPU
can expect 64-bit data from the device tree parser, so use
dev_read_addr_ptr instead of the dev_read_addr function in the
various files in the drivers directory that cast to a pointer.
As we are there also streamline the error response to -EINVAL on return.

Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

mtd: nand: arasan: Set ofnode value

Ofnode value is not set, so all the DT properties are not being read
and due to this default values are being used.

Find nand node and set chip->flash_node value.

Signed-off-by: Ashok Reddy Soma <ashok.reddy.soma@amd.com>
Link: https://lore.kernel.org/r/20230224050709.30014-3-ashok.reddy.soma@amd.com
Signed-off-by: Michal Simek <michal.simek@amd.com>

mtd: nand: arasan: Remove hardcoded bbt option

Bad block table option is hardcoded to read from flash with
NAND_BBT_USE_FLASH option. This decision should be done based on DT
property. Remove this hardcoding, to be able to use DT property.

Signed-off-by: Ashok Reddy Soma <ashok.reddy.soma@amd.com>
Link: https://lore.kernel.org/r/20230224050709.30014-2-ashok.reddy.soma@amd.com
Signed-off-by: Michal Simek <michal.simek@amd.com>

dm: Rename DM_GET_DRIVER() to DM_DRIVER_GET()

In the spirit of using the same base name for all of these related macros,
rename this to have the operation at the end. This is not widely used so
the impact is fairly small.

Signed-off-by: Simon Glass <sjg@chromium.org>

dm: treewide: Rename auto_alloc_size members to be shorter

This construct is quite long-winded. In earlier days it made some sense
since auto-allocation was a strange concept. But with driver model now
used pretty universally, we can shorten this to 'auto'. This reduces
verbosity and makes it easier to read.

Coincidentally it also ensures that every declaration is on one line,
thus making dtoc's job easier.

Signed-off-by: Simon Glass <sjg@chromium.org>

xilinx: drivers: Use '_' instead of '-' in driver name

The most of drivers are using '_' instead of '-' in driver name. That's why
sync up these names to be aligned. It looks quite bad to see both in use.
It is visible via dm tree command.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

common: Drop linux/delay.h from common header

Move this uncommon header out of the common header.

Signed-off-by: Simon Glass <sjg@chromium.org>

mtd: nand: Fix on-die ecc issues in arasan_nfc driver

Fixed wrong enumeration of nand_config structure. Added chip select
function before reading the nand chip for maf/dev id's, without this
unable to access id's from some of the micron chips. Also added a
print statement to identify if a nand flash is using on-die ecc.

Signed-off-by: T Karthik Reddy <t.karthik.reddy@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

mtd: nand: Remove hardcoded base address of nand

Remove hardcoded base address of nand and replace it with the
value taken from device tree. Remove base address from header
file too.

Signed-off-by: Ashok Reddy Soma <ashok.reddy.soma@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

mtd: nand: Move arasan nand driver to driver model

Make changes to arasan nand driver to move it to driver model.
Select DM_MTD if arasan nand driver is selected.

Signed-off-by: Ashok Reddy Soma <ashok.reddy.soma@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

mtd: nand: arasan_nfc: Add support for nand multi chip select

This patch adds support for nand multi chip select.
Also adding CONFIG_SYS_NAND_MAX_CHIPS to Kconfig to specify maximum number
of nand chips.

Signed-off-by: Tummala Karthik Reddy <t.karthik.reddy@xilinx.com>
Signed-off-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

mtd: nand: Arasan: Add subpage configuration support

Add support for disabling subpage write support via
CONFIG_SYS_NAND_NO_SUBPAGE_WRITE.

Currently the Linux Arasan driver does not support subpage writes and in
case of running UBI and accessing the same UBI volume from both U-Boot
and Linux it is required to have the same subpage write configuration
else the location of the UBI headers (EC + VID) will be misaligned
(subpage vs page) and incompatible. Hence the need for disabling
subpage write support in the U-Boot Arasan NAND driver.

Signed-off-by: Martin Lund <malu@gomspace.com>
Acked-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

mtd: Remove <common.h> and add needed includes

Remove <common.h> from this driver directory and when needed
add missing include files directly.

Reviewed-by: William Zhang <william.zhang@broadcom.com>
Signed-off-by: Tom Rini <trini@konsulko.com>

mtd: nand: arasan: Fix the crash caused by use after free

The below exception observed on QEMU, as it doesn't support
NAND controller.

"Synchronous Abort" handler, esr 0x96000005, far 0x17acfc878
elr: 000000000803ad40 lr : 000000000805f438 (reloc)
elr: 000000007fcb4d40 lr : 000000007fcd9438
x0 : 000000007bbfc880 x1 : 00000000ff100000
x2 : 000000007fcf059c x3 : 000000007bbfc870
x4 : 000000007fd9a388 x5 : 000000017acfc870
x6 : 0000000000000000 x7 : 000000007bbfd0e0
x8 : 0000000000003dd4 x9 : 000000007bbeec0c
x10: 0000000000000001 x11: 0000000000003f8c
x12: 000000007bbeecfc x13: 000000007bbeeeb0
x14: 000000007bbeeeb0 x15: 000000007bbee474
x16: 000000007fcef18c x17: 0000000000000000
x18: 000000007bbf9d70 x19: 000000007bbfc888
x20: 000000007bbfc870 x21: 000000007fd68ddb
x22: 00000000ffffffed x23: 000000007bbfc878
x24: 0000000000000000 x25: 0000000000000000
x26: 0000000000000000 x27: 0000000000000000
x28: 0000000000000000 x29: 000000007bbeed10

Code: 927ff8c1 924000c6 8b010065 f9400887 (f94004a2)
Resetting CPU ...

The crash is caused by the use after free.
Updating the correct return codes rather than hardcoding.
Fixes: 3dd0f8cccd6d ("mtd: nand: Remove hardcoded base address of nand")

Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com>
Link: https://lore.kernel.org/r/20240306033404.18537-1-venkatesh.abbarapu@amd.com
Signed-off-by: Michal Simek <michal.simek@amd.com>