Revert "Merge patch series "arm: dts: am62-beagleplay: Fix Beagleplay Ethernet""

When bringing in the series 'arm: dts: am62-beagleplay: Fix Beagleplay
Ethernet"' I failed to notice that b4 noticed it was based on next and
so took that as the base commit and merged that part of next to master.

This reverts commit c8ffd1356d42223cbb8c86280a083cc3c93e6426, reversing
changes made to 2ee6f3a5f7550de3599faef9704e166e5dcace35.

Reported-by: Jonas Karlman <jonas@kwiboo.se>
Signed-off-by: Tom Rini <trini@konsulko.com>

gpio: Remove <common.h> and add needed includes

Remove <common.h> from this driver directory and when needed
add missing include files directly.

Reviewed-by: Heiko Schocher <hs@denx.de>
Reviewed-by: Peter Robinson <pbrobinson@gmail.com>
Signed-off-by: Tom Rini <trini@konsulko.com>

treewide: use dev_read_addr_*_ptr() where appropriate

A follow-up to commit 842fb5de424e
("drivers: use devfdt_get_addr_size_index_ptr when cast to pointer")
and commit 320a1938b6f7
("drivers: use devfdt_get_addr_index_ptr when cast to pointer").

In addition to using the *_ptr variants of these functions where the
address is cast to a pointer, this also changes devfdt_get_addr_*() to
dev_read_addr_*() in a few places. Some variable and field types are
changed from fdt_addr_t or phys_addr_t to void* where the cast was
happening later.

This patch fixes a number of compile warnings when building a 32bit
U-Boot with CONFIG_PHYS_64BIT=y. In some places, it also fixes error
handling where the return value of dev_read_addr() etc. was checked for
NULL instead of FDT_ADDR_T_NONE.

Signed-off-by: Matthias Schiffer <matthias.schiffer@ew.tq-group.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

dm: Use access methods for dev/uclass private data

Most drivers use these access methods but a few do not. Update them.

In some cases the access is not permitted, so mark those with a FIXME tag
for the maintainer to check.

Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Pratyush Yadav <p.yadav@ti.com>

dm: treewide: Rename ..._platdata variables to just ..._plat

Try to maintain some consistency between these variables by using _plat as
a suffix for them.

Signed-off-by: Simon Glass <sjg@chromium.org>

dm: treewide: Rename 'platdata' variables to just 'plat'

We use 'priv' for private data but often use 'platdata' for platform data.
We can't really use 'pdata' since that is ambiguous (it could mean private
or platform data).

Rename some of the latter variables to end with 'plat' for consistency.

Signed-off-by: Simon Glass <sjg@chromium.org>

dm: Drop uses of dev_set_of_offset()

The need for this can be avoided by passing the correct node to the
device_bind() function.

Signed-off-by: Simon Glass <sjg@chromium.org>

dm: Remove uses of device_bind_offset()

This function is not needed since the standard device_bind() can be used
instead.

Signed-off-by: Simon Glass <sjg@chromium.org>

dm: core: Rename device_bind() to device_bind_offset()

This function is not necessary anymore, since device_bind_ofnode() does
the same thing and works with both flattree and livetree.

Rename it to indicate that it is special.

Signed-off-by: Simon Glass <sjg@chromium.org>

gpio: Remove DM_FLAG_PRE_RELOC flag in various drivers

When a driver declares DM_FLAG_PRE_RELOC flag, it wishes to be
bound before relocation. However due to a bug in the DM core,
the flag only takes effect when devices are statically declared
via U_BOOT_DEVICE(). This bug has been fixed recently by commit
"dm: core: Respect drivers with the DM_FLAG_PRE_RELOC flag in
lists_bind_fdt()", but with the fix, it has a side effect that
all existing drivers that declared DM_FLAG_PRE_RELOC flag will
be bound before relocation now. This may expose potential boot
failure on some boards due to insufficient memory during the
pre-relocation stage.

To mitigate this potential impact, the following changes are
implemented:

- Remove DM_FLAG_PRE_RELOC flag in the driver, if the driver
only supports configuration from device tree (OF_CONTROL)
- Keep DM_FLAG_PRE_RELOC flag in the driver only if the device
is statically declared via U_BOOT_DEVICE()
- Surround DM_FLAG_PRE_RELOC flag with OF_CONTROL check, for
drivers that support both statically declared devices and
configuration from device tree

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Patrick Delaunay <patrick.delaunay@st.com>

SPDX: Convert all of our single license tags to Linux Kernel style

When U-Boot started using SPDX tags we were among the early adopters and
there weren't a lot of other examples to borrow from. So we picked the
area of the file that usually had a full license text and replaced it
with an appropriate SPDX-License-Identifier: entry. Since then, the
Linux Kernel has adopted SPDX tags and they place it as the very first
line in a file (except where shebangs are used, then it's second line)
and with slightly different comment styles than us.

In part due to community overlap, in part due to better tag visibility
and in part for other minor reasons, switch over to that style.

This commit changes all instances where we have a single declared
license in the tag as both the before and after are identical in tag
contents. There's also a few places where I found we did not have a tag
and have introduced one.

Signed-off-by: Tom Rini <trini@konsulko.com>

Remove unnecessary instances of DECLARE_GLOBAL_DATA_PTR

We have a large number of places where while we historically referenced
gd in the code we no longer do, as well as cases where the code added
that line "just in case" during development and never dropped it.

Signed-off-by: Tom Rini <trini@konsulko.com>

dm: gpio: Correct use of -ENODEV in drivers

In U-Boot -ENODEV means that there is no device. When there is a problem
with the device, drivers should return an error like -ENXIO or -EREMOTEIO.
When the device tree properties cannot be read correct , they should
return -EINVAL.

Update various GPIO drivers to follow this rule, to help with consistency
for future driver writers.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reported-by: Adam Ford <aford173@gmail.com>

dm: gpio: Refactor to prepare for live tree support

Move the main part of the GPIO request function into a separate function
so that it can be used by the live tree function when added. Update the
xlate method to use a node reference.

Update all GPIO drivers to handle the modified xlate() method.

Signed-off-by: Simon Glass <sjg@chromium.org>

dm: Rename dev_addr..() functions

These support the flat device tree. We want to use the dev_read_..()
prefix for functions that support both flat tree and live tree. So rename
the existing functions to avoid confusion.

In the end we will have:

1. dev_read_addr...() - works on devices, supports flat/live tree
2. devfdt_get_addr...() - current functions, flat tree only
3. of_get_address() etc. - new functions, live tree only

All drivers will be written to use 1. That function will in turn call
either 2 or 3 depending on whether the flat or live tree is in use.

Note this involves changing some dead code - the imx_lpi2c.c file.

Signed-off-by: Simon Glass <sjg@chromium.org>

dm: core: Replace of_offset with accessor

At present devices use a simple integer offset to record the device tree
node associated with the device. In preparation for supporting a live
device tree, which uses a node pointer instead, refactor existing code to
access this field through an inline function.

Signed-off-by: Simon Glass <sjg@chromium.org>

gpio: add Tegra186 GPIO driver

Tegra186's GPIO controller register layout is significantly different from
previous chips, so add a new driver for it. In fact, there are two
different GPIO controllers in Tegra186 that share a similar register
layout, but very different port mapping. This driver covers both.

The DT binding is already present in the Linux kernel (in linux-next via
the Tegra tree so far).

Signed-off-by: Stephen Warren <swarren@nvidia.com>
Reviewed-by: Simon Glass <sjg@chromium.org> # v1
Signed-off-by: Tom Warren <twarren@nvidia.com>

gpio: Remove <common.h> and add needed includes

Remove <common.h> from this driver directory and when needed
add missing include files directly.

Reviewed-by: Heiko Schocher <hs@denx.de>
Reviewed-by: Peter Robinson <pbrobinson@gmail.com>
Signed-off-by: Tom Rini <trini@konsulko.com>

treewide: use dev_read_addr_*_ptr() where appropriate

A follow-up to commit 842fb5de424e
("drivers: use devfdt_get_addr_size_index_ptr when cast to pointer")
and commit 320a1938b6f7
("drivers: use devfdt_get_addr_index_ptr when cast to pointer").

In addition to using the *_ptr variants of these functions where the
address is cast to a pointer, this also changes devfdt_get_addr_*() to
dev_read_addr_*() in a few places. Some variable and field types are
changed from fdt_addr_t or phys_addr_t to void* where the cast was
happening later.

This patch fixes a number of compile warnings when building a 32bit
U-Boot with CONFIG_PHYS_64BIT=y. In some places, it also fixes error
handling where the return value of dev_read_addr() etc. was checked for
NULL instead of FDT_ADDR_T_NONE.

Signed-off-by: Matthias Schiffer <matthias.schiffer@ew.tq-group.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

dm: Use access methods for dev/uclass private data

Most drivers use these access methods but a few do not. Update them.

In some cases the access is not permitted, so mark those with a FIXME tag
for the maintainer to check.

Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Pratyush Yadav <p.yadav@ti.com>

dm: treewide: Rename ..._platdata variables to just ..._plat

Try to maintain some consistency between these variables by using _plat as
a suffix for them.

Signed-off-by: Simon Glass <sjg@chromium.org>

dm: treewide: Rename 'platdata' variables to just 'plat'

We use 'priv' for private data but often use 'platdata' for platform data.
We can't really use 'pdata' since that is ambiguous (it could mean private
or platform data).

Rename some of the latter variables to end with 'plat' for consistency.

Signed-off-by: Simon Glass <sjg@chromium.org>

dm: Drop uses of dev_set_of_offset()

The need for this can be avoided by passing the correct node to the
device_bind() function.

Signed-off-by: Simon Glass <sjg@chromium.org>

dm: Remove uses of device_bind_offset()

This function is not needed since the standard device_bind() can be used
instead.

Signed-off-by: Simon Glass <sjg@chromium.org>

dm: core: Rename device_bind() to device_bind_offset()

This function is not necessary anymore, since device_bind_ofnode() does
the same thing and works with both flattree and livetree.

Rename it to indicate that it is special.

Signed-off-by: Simon Glass <sjg@chromium.org>

gpio: Remove DM_FLAG_PRE_RELOC flag in various drivers

When a driver declares DM_FLAG_PRE_RELOC flag, it wishes to be
bound before relocation. However due to a bug in the DM core,
the flag only takes effect when devices are statically declared
via U_BOOT_DEVICE(). This bug has been fixed recently by commit
"dm: core: Respect drivers with the DM_FLAG_PRE_RELOC flag in
lists_bind_fdt()", but with the fix, it has a side effect that
all existing drivers that declared DM_FLAG_PRE_RELOC flag will
be bound before relocation now. This may expose potential boot
failure on some boards due to insufficient memory during the
pre-relocation stage.

To mitigate this potential impact, the following changes are
implemented:

- Remove DM_FLAG_PRE_RELOC flag in the driver, if the driver
only supports configuration from device tree (OF_CONTROL)
- Keep DM_FLAG_PRE_RELOC flag in the driver only if the device
is statically declared via U_BOOT_DEVICE()
- Surround DM_FLAG_PRE_RELOC flag with OF_CONTROL check, for
drivers that support both statically declared devices and
configuration from device tree

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Patrick Delaunay <patrick.delaunay@st.com>

SPDX: Convert all of our single license tags to Linux Kernel style

When U-Boot started using SPDX tags we were among the early adopters and
there weren't a lot of other examples to borrow from. So we picked the
area of the file that usually had a full license text and replaced it
with an appropriate SPDX-License-Identifier: entry. Since then, the
Linux Kernel has adopted SPDX tags and they place it as the very first
line in a file (except where shebangs are used, then it's second line)
and with slightly different comment styles than us.

In part due to community overlap, in part due to better tag visibility
and in part for other minor reasons, switch over to that style.

This commit changes all instances where we have a single declared
license in the tag as both the before and after are identical in tag
contents. There's also a few places where I found we did not have a tag
and have introduced one.

Signed-off-by: Tom Rini <trini@konsulko.com>

Remove unnecessary instances of DECLARE_GLOBAL_DATA_PTR

We have a large number of places where while we historically referenced
gd in the code we no longer do, as well as cases where the code added
that line "just in case" during development and never dropped it.

Signed-off-by: Tom Rini <trini@konsulko.com>

dm: gpio: Correct use of -ENODEV in drivers

In U-Boot -ENODEV means that there is no device. When there is a problem
with the device, drivers should return an error like -ENXIO or -EREMOTEIO.
When the device tree properties cannot be read correct , they should
return -EINVAL.

Update various GPIO drivers to follow this rule, to help with consistency
for future driver writers.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reported-by: Adam Ford <aford173@gmail.com>

dm: gpio: Refactor to prepare for live tree support

Move the main part of the GPIO request function into a separate function
so that it can be used by the live tree function when added. Update the
xlate method to use a node reference.

Update all GPIO drivers to handle the modified xlate() method.

Signed-off-by: Simon Glass <sjg@chromium.org>

dm: Rename dev_addr..() functions

These support the flat device tree. We want to use the dev_read_..()
prefix for functions that support both flat tree and live tree. So rename
the existing functions to avoid confusion.

In the end we will have:

1. dev_read_addr...() - works on devices, supports flat/live tree
2. devfdt_get_addr...() - current functions, flat tree only
3. of_get_address() etc. - new functions, live tree only

All drivers will be written to use 1. That function will in turn call
either 2 or 3 depending on whether the flat or live tree is in use.

Note this involves changing some dead code - the imx_lpi2c.c file.

Signed-off-by: Simon Glass <sjg@chromium.org>

dm: core: Replace of_offset with accessor

At present devices use a simple integer offset to record the device tree
node associated with the device. In preparation for supporting a live
device tree, which uses a node pointer instead, refactor existing code to
access this field through an inline function.

Signed-off-by: Simon Glass <sjg@chromium.org>

gpio: add Tegra186 GPIO driver

Tegra186's GPIO controller register layout is significantly different from
previous chips, so add a new driver for it. In fact, there are two
different GPIO controllers in Tegra186 that share a similar register
layout, but very different port mapping. This driver covers both.

The DT binding is already present in the Linux kernel (in linux-next via
the Tegra tree so far).

Signed-off-by: Stephen Warren <swarren@nvidia.com>
Reviewed-by: Simon Glass <sjg@chromium.org> # v1
Signed-off-by: Tom Warren <twarren@nvidia.com>

treewide: use dev_read_addr_*_ptr() where appropriate

A follow-up to commit 842fb5de424e
("drivers: use devfdt_get_addr_size_index_ptr when cast to pointer")
and commit 320a1938b6f7
("drivers: use devfdt_get_addr_index_ptr when cast to pointer").

In addition to using the *_ptr variants of these functions where the
address is cast to a pointer, this also changes devfdt_get_addr_*() to
dev_read_addr_*() in a few places. Some variable and field types are
changed from fdt_addr_t or phys_addr_t to void* where the cast was
happening later.

This patch fixes a number of compile warnings when building a 32bit
U-Boot with CONFIG_PHYS_64BIT=y. In some places, it also fixes error
handling where the return value of dev_read_addr() etc. was checked for
NULL instead of FDT_ADDR_T_NONE.

Signed-off-by: Matthias Schiffer <matthias.schiffer@ew.tq-group.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

dm: Use access methods for dev/uclass private data

Most drivers use these access methods but a few do not. Update them.

In some cases the access is not permitted, so mark those with a FIXME tag
for the maintainer to check.

Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Pratyush Yadav <p.yadav@ti.com>

dm: treewide: Rename ..._platdata variables to just ..._plat

Try to maintain some consistency between these variables by using _plat as
a suffix for them.

Signed-off-by: Simon Glass <sjg@chromium.org>

dm: treewide: Rename 'platdata' variables to just 'plat'

We use 'priv' for private data but often use 'platdata' for platform data.
We can't really use 'pdata' since that is ambiguous (it could mean private
or platform data).

Rename some of the latter variables to end with 'plat' for consistency.

Signed-off-by: Simon Glass <sjg@chromium.org>

dm: Drop uses of dev_set_of_offset()

The need for this can be avoided by passing the correct node to the
device_bind() function.

Signed-off-by: Simon Glass <sjg@chromium.org>

dm: Remove uses of device_bind_offset()

This function is not needed since the standard device_bind() can be used
instead.

Signed-off-by: Simon Glass <sjg@chromium.org>

dm: core: Rename device_bind() to device_bind_offset()

This function is not necessary anymore, since device_bind_ofnode() does
the same thing and works with both flattree and livetree.

Rename it to indicate that it is special.

Signed-off-by: Simon Glass <sjg@chromium.org>

gpio: Remove DM_FLAG_PRE_RELOC flag in various drivers

When a driver declares DM_FLAG_PRE_RELOC flag, it wishes to be
bound before relocation. However due to a bug in the DM core,
the flag only takes effect when devices are statically declared
via U_BOOT_DEVICE(). This bug has been fixed recently by commit
"dm: core: Respect drivers with the DM_FLAG_PRE_RELOC flag in
lists_bind_fdt()", but with the fix, it has a side effect that
all existing drivers that declared DM_FLAG_PRE_RELOC flag will
be bound before relocation now. This may expose potential boot
failure on some boards due to insufficient memory during the
pre-relocation stage.

To mitigate this potential impact, the following changes are
implemented:

- Remove DM_FLAG_PRE_RELOC flag in the driver, if the driver
only supports configuration from device tree (OF_CONTROL)
- Keep DM_FLAG_PRE_RELOC flag in the driver only if the device
is statically declared via U_BOOT_DEVICE()
- Surround DM_FLAG_PRE_RELOC flag with OF_CONTROL check, for
drivers that support both statically declared devices and
configuration from device tree

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Patrick Delaunay <patrick.delaunay@st.com>

SPDX: Convert all of our single license tags to Linux Kernel style

When U-Boot started using SPDX tags we were among the early adopters and
there weren't a lot of other examples to borrow from. So we picked the
area of the file that usually had a full license text and replaced it
with an appropriate SPDX-License-Identifier: entry. Since then, the
Linux Kernel has adopted SPDX tags and they place it as the very first
line in a file (except where shebangs are used, then it's second line)
and with slightly different comment styles than us.

In part due to community overlap, in part due to better tag visibility
and in part for other minor reasons, switch over to that style.

This commit changes all instances where we have a single declared
license in the tag as both the before and after are identical in tag
contents. There's also a few places where I found we did not have a tag
and have introduced one.

Signed-off-by: Tom Rini <trini@konsulko.com>

Remove unnecessary instances of DECLARE_GLOBAL_DATA_PTR

We have a large number of places where while we historically referenced
gd in the code we no longer do, as well as cases where the code added
that line "just in case" during development and never dropped it.

Signed-off-by: Tom Rini <trini@konsulko.com>

dm: gpio: Correct use of -ENODEV in drivers

In U-Boot -ENODEV means that there is no device. When there is a problem
with the device, drivers should return an error like -ENXIO or -EREMOTEIO.
When the device tree properties cannot be read correct , they should
return -EINVAL.

Update various GPIO drivers to follow this rule, to help with consistency
for future driver writers.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reported-by: Adam Ford <aford173@gmail.com>

dm: gpio: Refactor to prepare for live tree support

Move the main part of the GPIO request function into a separate function
so that it can be used by the live tree function when added. Update the
xlate method to use a node reference.

Update all GPIO drivers to handle the modified xlate() method.

Signed-off-by: Simon Glass <sjg@chromium.org>

dm: Rename dev_addr..() functions

These support the flat device tree. We want to use the dev_read_..()
prefix for functions that support both flat tree and live tree. So rename
the existing functions to avoid confusion.

In the end we will have:

1. dev_read_addr...() - works on devices, supports flat/live tree
2. devfdt_get_addr...() - current functions, flat tree only
3. of_get_address() etc. - new functions, live tree only

All drivers will be written to use 1. That function will in turn call
either 2 or 3 depending on whether the flat or live tree is in use.

Note this involves changing some dead code - the imx_lpi2c.c file.

Signed-off-by: Simon Glass <sjg@chromium.org>

dm: core: Replace of_offset with accessor

At present devices use a simple integer offset to record the device tree
node associated with the device. In preparation for supporting a live
device tree, which uses a node pointer instead, refactor existing code to
access this field through an inline function.

Signed-off-by: Simon Glass <sjg@chromium.org>

gpio: add Tegra186 GPIO driver

Tegra186's GPIO controller register layout is significantly different from
previous chips, so add a new driver for it. In fact, there are two
different GPIO controllers in Tegra186 that share a similar register
layout, but very different port mapping. This driver covers both.

The DT binding is already present in the Linux kernel (in linux-next via
the Tegra tree so far).

Signed-off-by: Stephen Warren <swarren@nvidia.com>
Reviewed-by: Simon Glass <sjg@chromium.org> # v1
Signed-off-by: Tom Warren <twarren@nvidia.com>

dm: Use access methods for dev/uclass private data

Most drivers use these access methods but a few do not. Update them.

In some cases the access is not permitted, so mark those with a FIXME tag
for the maintainer to check.

Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Pratyush Yadav <p.yadav@ti.com>

dm: treewide: Rename ..._platdata variables to just ..._plat

Try to maintain some consistency between these variables by using _plat as
a suffix for them.

Signed-off-by: Simon Glass <sjg@chromium.org>

dm: treewide: Rename 'platdata' variables to just 'plat'

We use 'priv' for private data but often use 'platdata' for platform data.
We can't really use 'pdata' since that is ambiguous (it could mean private
or platform data).

Rename some of the latter variables to end with 'plat' for consistency.

Signed-off-by: Simon Glass <sjg@chromium.org>

dm: Drop uses of dev_set_of_offset()

The need for this can be avoided by passing the correct node to the
device_bind() function.

Signed-off-by: Simon Glass <sjg@chromium.org>

dm: Remove uses of device_bind_offset()

This function is not needed since the standard device_bind() can be used
instead.

Signed-off-by: Simon Glass <sjg@chromium.org>

dm: core: Rename device_bind() to device_bind_offset()

This function is not necessary anymore, since device_bind_ofnode() does
the same thing and works with both flattree and livetree.

Rename it to indicate that it is special.

Signed-off-by: Simon Glass <sjg@chromium.org>

dm: Use access methods for dev/uclass private data

Most drivers use these access methods but a few do not. Update them.

In some cases the access is not permitted, so mark those with a FIXME tag
for the maintainer to check.

Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Pratyush Yadav <p.yadav@ti.com>

dm: treewide: Rename ..._platdata variables to just ..._plat

Try to maintain some consistency between these variables by using _plat as
a suffix for them.

Signed-off-by: Simon Glass <sjg@chromium.org>

dm: treewide: Rename 'platdata' variables to just 'plat'

We use 'priv' for private data but often use 'platdata' for platform data.
We can't really use 'pdata' since that is ambiguous (it could mean private
or platform data).

Rename some of the latter variables to end with 'plat' for consistency.

Signed-off-by: Simon Glass <sjg@chromium.org>

dm: Drop uses of dev_set_of_offset()

The need for this can be avoided by passing the correct node to the
device_bind() function.

Signed-off-by: Simon Glass <sjg@chromium.org>

dm: Remove uses of device_bind_offset()

This function is not needed since the standard device_bind() can be used
instead.

Signed-off-by: Simon Glass <sjg@chromium.org>

dm: core: Rename device_bind() to device_bind_offset()

This function is not necessary anymore, since device_bind_ofnode() does
the same thing and works with both flattree and livetree.

Rename it to indicate that it is special.

Signed-off-by: Simon Glass <sjg@chromium.org>

dm: Use access methods for dev/uclass private data

Most drivers use these access methods but a few do not. Update them.

In some cases the access is not permitted, so mark those with a FIXME tag
for the maintainer to check.

Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Pratyush Yadav <p.yadav@ti.com>

dm: treewide: Rename ..._platdata variables to just ..._plat

Try to maintain some consistency between these variables by using _plat as
a suffix for them.

Signed-off-by: Simon Glass <sjg@chromium.org>

dm: treewide: Rename 'platdata' variables to just 'plat'

We use 'priv' for private data but often use 'platdata' for platform data.
We can't really use 'pdata' since that is ambiguous (it could mean private
or platform data).

Rename some of the latter variables to end with 'plat' for consistency.

Signed-off-by: Simon Glass <sjg@chromium.org>

dm: Drop uses of dev_set_of_offset()

The need for this can be avoided by passing the correct node to the
device_bind() function.

Signed-off-by: Simon Glass <sjg@chromium.org>

dm: Remove uses of device_bind_offset()

This function is not needed since the standard device_bind() can be used
instead.

Signed-off-by: Simon Glass <sjg@chromium.org>

dm: core: Rename device_bind() to device_bind_offset()

This function is not necessary anymore, since device_bind_ofnode() does
the same thing and works with both flattree and livetree.

Rename it to indicate that it is special.

Signed-off-by: Simon Glass <sjg@chromium.org>

dm: Use access methods for dev/uclass private data

Most drivers use these access methods but a few do not. Update them.

In some cases the access is not permitted, so mark those with a FIXME tag
for the maintainer to check.

Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Pratyush Yadav <p.yadav@ti.com>

dm: treewide: Rename ..._platdata variables to just ..._plat

Try to maintain some consistency between these variables by using _plat as
a suffix for them.

Signed-off-by: Simon Glass <sjg@chromium.org>

dm: treewide: Rename 'platdata' variables to just 'plat'

We use 'priv' for private data but often use 'platdata' for platform data.
We can't really use 'pdata' since that is ambiguous (it could mean private
or platform data).

Rename some of the latter variables to end with 'plat' for consistency.

Signed-off-by: Simon Glass <sjg@chromium.org>

dm: Drop uses of dev_set_of_offset()

The need for this can be avoided by passing the correct node to the
device_bind() function.

Signed-off-by: Simon Glass <sjg@chromium.org>

dm: Remove uses of device_bind_offset()

This function is not needed since the standard device_bind() can be used
instead.

Signed-off-by: Simon Glass <sjg@chromium.org>

dm: core: Rename device_bind() to device_bind_offset()

This function is not necessary anymore, since device_bind_ofnode() does
the same thing and works with both flattree and livetree.

Rename it to indicate that it is special.

Signed-off-by: Simon Glass <sjg@chromium.org>

dm: Use access methods for dev/uclass private data

Most drivers use these access methods but a few do not. Update them.

In some cases the access is not permitted, so mark those with a FIXME tag
for the maintainer to check.

Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Pratyush Yadav <p.yadav@ti.com>

dm: treewide: Rename ..._platdata variables to just ..._plat

Try to maintain some consistency between these variables by using _plat as
a suffix for them.

Signed-off-by: Simon Glass <sjg@chromium.org>

dm: treewide: Rename 'platdata' variables to just 'plat'

We use 'priv' for private data but often use 'platdata' for platform data.
We can't really use 'pdata' since that is ambiguous (it could mean private
or platform data).

Rename some of the latter variables to end with 'plat' for consistency.

Signed-off-by: Simon Glass <sjg@chromium.org>

dm: Drop uses of dev_set_of_offset()

The need for this can be avoided by passing the correct node to the
device_bind() function.

Signed-off-by: Simon Glass <sjg@chromium.org>

dm: Remove uses of device_bind_offset()

This function is not needed since the standard device_bind() can be used
instead.

Signed-off-by: Simon Glass <sjg@chromium.org>

dm: core: Rename device_bind() to device_bind_offset()

This function is not necessary anymore, since device_bind_ofnode() does
the same thing and works with both flattree and livetree.

Rename it to indicate that it is special.

Signed-off-by: Simon Glass <sjg@chromium.org>

dm: Use access methods for dev/uclass private data

Most drivers use these access methods but a few do not. Update them.

In some cases the access is not permitted, so mark those with a FIXME tag
for the maintainer to check.

Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Pratyush Yadav <p.yadav@ti.com>

dm: treewide: Rename ..._platdata variables to just ..._plat

Try to maintain some consistency between these variables by using _plat as
a suffix for them.

Signed-off-by: Simon Glass <sjg@chromium.org>

dm: treewide: Rename 'platdata' variables to just 'plat'

We use 'priv' for private data but often use 'platdata' for platform data.
We can't really use 'pdata' since that is ambiguous (it could mean private
or platform data).

Rename some of the latter variables to end with 'plat' for consistency.

Signed-off-by: Simon Glass <sjg@chromium.org>

dm: Drop uses of dev_set_of_offset()

The need for this can be avoided by passing the correct node to the
device_bind() function.

Signed-off-by: Simon Glass <sjg@chromium.org>

dm: Remove uses of device_bind_offset()

This function is not needed since the standard device_bind() can be used
instead.

Signed-off-by: Simon Glass <sjg@chromium.org>

dm: core: Rename device_bind() to device_bind_offset()

This function is not necessary anymore, since device_bind_ofnode() does
the same thing and works with both flattree and livetree.

Rename it to indicate that it is special.

Signed-off-by: Simon Glass <sjg@chromium.org>

dm: Use access methods for dev/uclass private data

Most drivers use these access methods but a few do not. Update them.

In some cases the access is not permitted, so mark those with a FIXME tag
for the maintainer to check.

Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Pratyush Yadav <p.yadav@ti.com>

dm: treewide: Rename ..._platdata variables to just ..._plat

Try to maintain some consistency between these variables by using _plat as
a suffix for them.

Signed-off-by: Simon Glass <sjg@chromium.org>

dm: treewide: Rename 'platdata' variables to just 'plat'

We use 'priv' for private data but often use 'platdata' for platform data.
We can't really use 'pdata' since that is ambiguous (it could mean private
or platform data).

Rename some of the latter variables to end with 'plat' for consistency.

Signed-off-by: Simon Glass <sjg@chromium.org>

dm: Drop uses of dev_set_of_offset()

The need for this can be avoided by passing the correct node to the
device_bind() function.

Signed-off-by: Simon Glass <sjg@chromium.org>

dm: Remove uses of device_bind_offset()

This function is not needed since the standard device_bind() can be used
instead.

Signed-off-by: Simon Glass <sjg@chromium.org>

dm: core: Rename device_bind() to device_bind_offset()

This function is not necessary anymore, since device_bind_ofnode() does
the same thing and works with both flattree and livetree.

Rename it to indicate that it is special.

Signed-off-by: Simon Glass <sjg@chromium.org>

dm: Use access methods for dev/uclass private data

Most drivers use these access methods but a few do not. Update them.

In some cases the access is not permitted, so mark those with a FIXME tag
for the maintainer to check.

Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Pratyush Yadav <p.yadav@ti.com>

dm: treewide: Rename ..._platdata variables to just ..._plat

Try to maintain some consistency between these variables by using _plat as
a suffix for them.

Signed-off-by: Simon Glass <sjg@chromium.org>

dm: treewide: Rename 'platdata' variables to just 'plat'

We use 'priv' for private data but often use 'platdata' for platform data.
We can't really use 'pdata' since that is ambiguous (it could mean private
or platform data).

Rename some of the latter variables to end with 'plat' for consistency.

Signed-off-by: Simon Glass <sjg@chromium.org>

dm: Drop uses of dev_set_of_offset()

The need for this can be avoided by passing the correct node to the
device_bind() function.

Signed-off-by: Simon Glass <sjg@chromium.org>

dm: Remove uses of device_bind_offset()

This function is not needed since the standard device_bind() can be used
instead.

Signed-off-by: Simon Glass <sjg@chromium.org>

dm: core: Rename device_bind() to device_bind_offset()

This function is not necessary anymore, since device_bind_ofnode() does
the same thing and works with both flattree and livetree.

Rename it to indicate that it is special.

Signed-off-by: Simon Glass <sjg@chromium.org>

dm: Use access methods for dev/uclass private data

Most drivers use these access methods but a few do not. Update them.

In some cases the access is not permitted, so mark those with a FIXME tag
for the maintainer to check.

Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Pratyush Yadav <p.yadav@ti.com>

dm: treewide: Rename ..._platdata variables to just ..._plat

Try to maintain some consistency between these variables by using _plat as
a suffix for them.

Signed-off-by: Simon Glass <sjg@chromium.org>

dm: treewide: Rename 'platdata' variables to just 'plat'

We use 'priv' for private data but often use 'platdata' for platform data.
We can't really use 'pdata' since that is ambiguous (it could mean private
or platform data).

Rename some of the latter variables to end with 'plat' for consistency.

Signed-off-by: Simon Glass <sjg@chromium.org>

dm: Drop uses of dev_set_of_offset()

The need for this can be avoided by passing the correct node to the
device_bind() function.

Signed-off-by: Simon Glass <sjg@chromium.org>

dm: Remove uses of device_bind_offset()

This function is not needed since the standard device_bind() can be used
instead.

Signed-off-by: Simon Glass <sjg@chromium.org>

dm: core: Rename device_bind() to device_bind_offset()

This function is not necessary anymore, since device_bind_ofnode() does
the same thing and works with both flattree and livetree.

Rename it to indicate that it is special.

Signed-off-by: Simon Glass <sjg@chromium.org>

dm: Use access methods for dev/uclass private data

Most drivers use these access methods but a few do not. Update them.

In some cases the access is not permitted, so mark those with a FIXME tag
for the maintainer to check.

Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Pratyush Yadav <p.yadav@ti.com>

dm: treewide: Rename ..._platdata variables to just ..._plat

Try to maintain some consistency between these variables by using _plat as
a suffix for them.

Signed-off-by: Simon Glass <sjg@chromium.org>

dm: treewide: Rename 'platdata' variables to just 'plat'

We use 'priv' for private data but often use 'platdata' for platform data.
We can't really use 'pdata' since that is ambiguous (it could mean private
or platform data).

Rename some of the latter variables to end with 'plat' for consistency.

Signed-off-by: Simon Glass <sjg@chromium.org>

dm: Drop uses of dev_set_of_offset()

The need for this can be avoided by passing the correct node to the
device_bind() function.

Signed-off-by: Simon Glass <sjg@chromium.org>

dm: Remove uses of device_bind_offset()

This function is not needed since the standard device_bind() can be used
instead.

Signed-off-by: Simon Glass <sjg@chromium.org>

dm: core: Rename device_bind() to device_bind_offset()

This function is not necessary anymore, since device_bind_ofnode() does
the same thing and works with both flattree and livetree.

Rename it to indicate that it is special.

Signed-off-by: Simon Glass <sjg@chromium.org>

dm: Use access methods for dev/uclass private data

Most drivers use these access methods but a few do not. Update them.

In some cases the access is not permitted, so mark those with a FIXME tag
for the maintainer to check.

Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Pratyush Yadav <p.yadav@ti.com>

dm: treewide: Rename ..._platdata variables to just ..._plat

Try to maintain some consistency between these variables by using _plat as
a suffix for them.

Signed-off-by: Simon Glass <sjg@chromium.org>

dm: treewide: Rename 'platdata' variables to just 'plat'

We use 'priv' for private data but often use 'platdata' for platform data.
We can't really use 'pdata' since that is ambiguous (it could mean private
or platform data).

Rename some of the latter variables to end with 'plat' for consistency.

Signed-off-by: Simon Glass <sjg@chromium.org>

dm: Drop uses of dev_set_of_offset()

The need for this can be avoided by passing the correct node to the
device_bind() function.

Signed-off-by: Simon Glass <sjg@chromium.org>

dm: Remove uses of device_bind_offset()

This function is not needed since the standard device_bind() can be used
instead.

Signed-off-by: Simon Glass <sjg@chromium.org>

dm: core: Rename device_bind() to device_bind_offset()

This function is not necessary anymore, since device_bind_ofnode() does
the same thing and works with both flattree and livetree.

Rename it to indicate that it is special.

Signed-off-by: Simon Glass <sjg@chromium.org>

dm: Use access methods for dev/uclass private data

Most drivers use these access methods but a few do not. Update them.

In some cases the access is not permitted, so mark those with a FIXME tag
for the maintainer to check.

Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Pratyush Yadav <p.yadav@ti.com>

dm: treewide: Rename ..._platdata variables to just ..._plat

Try to maintain some consistency between these variables by using _plat as
a suffix for them.

Signed-off-by: Simon Glass <sjg@chromium.org>

dm: treewide: Rename 'platdata' variables to just 'plat'

We use 'priv' for private data but often use 'platdata' for platform data.
We can't really use 'pdata' since that is ambiguous (it could mean private
or platform data).

Rename some of the latter variables to end with 'plat' for consistency.

Signed-off-by: Simon Glass <sjg@chromium.org>

dm: Drop uses of dev_set_of_offset()

The need for this can be avoided by passing the correct node to the
device_bind() function.

Signed-off-by: Simon Glass <sjg@chromium.org>

dm: Remove uses of device_bind_offset()

This function is not needed since the standard device_bind() can be used
instead.

Signed-off-by: Simon Glass <sjg@chromium.org>

dm: core: Rename device_bind() to device_bind_offset()

This function is not necessary anymore, since device_bind_ofnode() does
the same thing and works with both flattree and livetree.

Rename it to indicate that it is special.

Signed-off-by: Simon Glass <sjg@chromium.org>

dm: Use access methods for dev/uclass private data

Most drivers use these access methods but a few do not. Update them.

In some cases the access is not permitted, so mark those with a FIXME tag
for the maintainer to check.

Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Pratyush Yadav <p.yadav@ti.com>

dm: treewide: Rename ..._platdata variables to just ..._plat

Try to maintain some consistency between these variables by using _plat as
a suffix for them.

Signed-off-by: Simon Glass <sjg@chromium.org>

dm: treewide: Rename 'platdata' variables to just 'plat'

We use 'priv' for private data but often use 'platdata' for platform data.
We can't really use 'pdata' since that is ambiguous (it could mean private
or platform data).

Rename some of the latter variables to end with 'plat' for consistency.

Signed-off-by: Simon Glass <sjg@chromium.org>

dm: Drop uses of dev_set_of_offset()

The need for this can be avoided by passing the correct node to the
device_bind() function.

Signed-off-by: Simon Glass <sjg@chromium.org>

dm: Remove uses of device_bind_offset()

This function is not needed since the standard device_bind() can be used
instead.

Signed-off-by: Simon Glass <sjg@chromium.org>

dm: core: Rename device_bind() to device_bind_offset()

This function is not necessary anymore, since device_bind_ofnode() does
the same thing and works with both flattree and livetree.

Rename it to indicate that it is special.

Signed-off-by: Simon Glass <sjg@chromium.org>

dm: Use access methods for dev/uclass private data

Most drivers use these access methods but a few do not. Update them.

In some cases the access is not permitted, so mark those with a FIXME tag
for the maintainer to check.

Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Pratyush Yadav <p.yadav@ti.com>

dm: treewide: Rename ..._platdata variables to just ..._plat

Try to maintain some consistency between these variables by using _plat as
a suffix for them.

Signed-off-by: Simon Glass <sjg@chromium.org>

dm: treewide: Rename 'platdata' variables to just 'plat'

We use 'priv' for private data but often use 'platdata' for platform data.
We can't really use 'pdata' since that is ambiguous (it could mean private
or platform data).

Rename some of the latter variables to end with 'plat' for consistency.

Signed-off-by: Simon Glass <sjg@chromium.org>

dm: Drop uses of dev_set_of_offset()

The need for this can be avoided by passing the correct node to the
device_bind() function.

Signed-off-by: Simon Glass <sjg@chromium.org>

dm: Remove uses of device_bind_offset()

This function is not needed since the standard device_bind() can be used
instead.

Signed-off-by: Simon Glass <sjg@chromium.org>

dm: core: Rename device_bind() to device_bind_offset()

This function is not necessary anymore, since device_bind_ofnode() does
the same thing and works with both flattree and livetree.

Rename it to indicate that it is special.

Signed-off-by: Simon Glass <sjg@chromium.org>

dm: Use access methods for dev/uclass private data

Most drivers use these access methods but a few do not. Update them.

In some cases the access is not permitted, so mark those with a FIXME tag
for the maintainer to check.

Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Pratyush Yadav <p.yadav@ti.com>

dm: treewide: Rename ..._platdata variables to just ..._plat

Try to maintain some consistency between these variables by using _plat as
a suffix for them.

Signed-off-by: Simon Glass <sjg@chromium.org>

dm: treewide: Rename 'platdata' variables to just 'plat'

We use 'priv' for private data but often use 'platdata' for platform data.
We can't really use 'pdata' since that is ambiguous (it could mean private
or platform data).

Rename some of the latter variables to end with 'plat' for consistency.

Signed-off-by: Simon Glass <sjg@chromium.org>

dm: Drop uses of dev_set_of_offset()

The need for this can be avoided by passing the correct node to the
device_bind() function.

Signed-off-by: Simon Glass <sjg@chromium.org>

dm: Remove uses of device_bind_offset()

This function is not needed since the standard device_bind() can be used
instead.

Signed-off-by: Simon Glass <sjg@chromium.org>

dm: core: Rename device_bind() to device_bind_offset()

This function is not necessary anymore, since device_bind_ofnode() does
the same thing and works with both flattree and livetree.

Rename it to indicate that it is special.

Signed-off-by: Simon Glass <sjg@chromium.org>

dm: Use access methods for dev/uclass private data

Most drivers use these access methods but a few do not. Update them.

In some cases the access is not permitted, so mark those with a FIXME tag
for the maintainer to check.

Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Pratyush Yadav <p.yadav@ti.com>

dm: treewide: Rename ..._platdata variables to just ..._plat

Try to maintain some consistency between these variables by using _plat as
a suffix for them.

Signed-off-by: Simon Glass <sjg@chromium.org>

dm: treewide: Rename 'platdata' variables to just 'plat'

We use 'priv' for private data but often use 'platdata' for platform data.
We can't really use 'pdata' since that is ambiguous (it could mean private
or platform data).

Rename some of the latter variables to end with 'plat' for consistency.

Signed-off-by: Simon Glass <sjg@chromium.org>

dm: Drop uses of dev_set_of_offset()

The need for this can be avoided by passing the correct node to the
device_bind() function.

Signed-off-by: Simon Glass <sjg@chromium.org>

dm: Remove uses of device_bind_offset()

This function is not needed since the standard device_bind() can be used
instead.

Signed-off-by: Simon Glass <sjg@chromium.org>

dm: core: Rename device_bind() to device_bind_offset()

This function is not necessary anymore, since device_bind_ofnode() does
the same thing and works with both flattree and livetree.

Rename it to indicate that it is special.

Signed-off-by: Simon Glass <sjg@chromium.org>

dm: Use access methods for dev/uclass private data

Most drivers use these access methods but a few do not. Update them.

In some cases the access is not permitted, so mark those with a FIXME tag
for the maintainer to check.

Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Pratyush Yadav <p.yadav@ti.com>

dm: treewide: Rename ..._platdata variables to just ..._plat

Try to maintain some consistency between these variables by using _plat as
a suffix for them.

Signed-off-by: Simon Glass <sjg@chromium.org>

dm: treewide: Rename 'platdata' variables to just 'plat'

We use 'priv' for private data but often use 'platdata' for platform data.
We can't really use 'pdata' since that is ambiguous (it could mean private
or platform data).

Rename some of the latter variables to end with 'plat' for consistency.

Signed-off-by: Simon Glass <sjg@chromium.org>

dm: Drop uses of dev_set_of_offset()

The need for this can be avoided by passing the correct node to the
device_bind() function.

Signed-off-by: Simon Glass <sjg@chromium.org>

dm: Remove uses of device_bind_offset()

This function is not needed since the standard device_bind() can be used
instead.

Signed-off-by: Simon Glass <sjg@chromium.org>

dm: core: Rename device_bind() to device_bind_offset()

This function is not necessary anymore, since device_bind_ofnode() does
the same thing and works with both flattree and livetree.

Rename it to indicate that it is special.

Signed-off-by: Simon Glass <sjg@chromium.org>

dm: Use access methods for dev/uclass private data

Most drivers use these access methods but a few do not. Update them.

In some cases the access is not permitted, so mark those with a FIXME tag
for the maintainer to check.

Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Pratyush Yadav <p.yadav@ti.com>

dm: treewide: Rename ..._platdata variables to just ..._plat

Try to maintain some consistency between these variables by using _plat as
a suffix for them.

Signed-off-by: Simon Glass <sjg@chromium.org>

dm: treewide: Rename 'platdata' variables to just 'plat'

We use 'priv' for private data but often use 'platdata' for platform data.
We can't really use 'pdata' since that is ambiguous (it could mean private
or platform data).

Rename some of the latter variables to end with 'plat' for consistency.

Signed-off-by: Simon Glass <sjg@chromium.org>

dm: Drop uses of dev_set_of_offset()

The need for this can be avoided by passing the correct node to the
device_bind() function.

Signed-off-by: Simon Glass <sjg@chromium.org>

dm: Remove uses of device_bind_offset()

This function is not needed since the standard device_bind() can be used
instead.

Signed-off-by: Simon Glass <sjg@chromium.org>

dm: core: Rename device_bind() to device_bind_offset()

This function is not necessary anymore, since device_bind_ofnode() does
the same thing and works with both flattree and livetree.

Rename it to indicate that it is special.

Signed-off-by: Simon Glass <sjg@chromium.org>

dm: Use access methods for dev/uclass private data

Most drivers use these access methods but a few do not. Update them.

In some cases the access is not permitted, so mark those with a FIXME tag
for the maintainer to check.

Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Pratyush Yadav <p.yadav@ti.com>

dm: treewide: Rename ..._platdata variables to just ..._plat

Try to maintain some consistency between these variables by using _plat as
a suffix for them.

Signed-off-by: Simon Glass <sjg@chromium.org>

dm: treewide: Rename 'platdata' variables to just 'plat'

We use 'priv' for private data but often use 'platdata' for platform data.
We can't really use 'pdata' since that is ambiguous (it could mean private
or platform data).

Rename some of the latter variables to end with 'plat' for consistency.

Signed-off-by: Simon Glass <sjg@chromium.org>

dm: Drop uses of dev_set_of_offset()

The need for this can be avoided by passing the correct node to the
device_bind() function.

Signed-off-by: Simon Glass <sjg@chromium.org>

dm: Remove uses of device_bind_offset()

This function is not needed since the standard device_bind() can be used
instead.

Signed-off-by: Simon Glass <sjg@chromium.org>

dm: core: Rename device_bind() to device_bind_offset()

This function is not necessary anymore, since device_bind_ofnode() does
the same thing and works with both flattree and livetree.

Rename it to indicate that it is special.

Signed-off-by: Simon Glass <sjg@chromium.org>

dm: Use access methods for dev/uclass private data

Most drivers use these access methods but a few do not. Update them.

In some cases the access is not permitted, so mark those with a FIXME tag
for the maintainer to check.

Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Pratyush Yadav <p.yadav@ti.com>

dm: treewide: Rename ..._platdata variables to just ..._plat

Try to maintain some consistency between these variables by using _plat as
a suffix for them.

Signed-off-by: Simon Glass <sjg@chromium.org>

dm: treewide: Rename 'platdata' variables to just 'plat'

We use 'priv' for private data but often use 'platdata' for platform data.
We can't really use 'pdata' since that is ambiguous (it could mean private
or platform data).

Rename some of the latter variables to end with 'plat' for consistency.

Signed-off-by: Simon Glass <sjg@chromium.org>

dm: Drop uses of dev_set_of_offset()

The need for this can be avoided by passing the correct node to the
device_bind() function.

Signed-off-by: Simon Glass <sjg@chromium.org>

dm: Remove uses of device_bind_offset()

This function is not needed since the standard device_bind() can be used
instead.

Signed-off-by: Simon Glass <sjg@chromium.org>

dm: core: Rename device_bind() to device_bind_offset()

This function is not necessary anymore, since device_bind_ofnode() does
the same thing and works with both flattree and livetree.

Rename it to indicate that it is special.

Signed-off-by: Simon Glass <sjg@chromium.org>

dm: Use access methods for dev/uclass private data

Most drivers use these access methods but a few do not. Update them.

In some cases the access is not permitted, so mark those with a FIXME tag
for the maintainer to check.

Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Pratyush Yadav <p.yadav@ti.com>

dm: treewide: Rename ..._platdata variables to just ..._plat

Try to maintain some consistency between these variables by using _plat as
a suffix for them.

Signed-off-by: Simon Glass <sjg@chromium.org>

dm: treewide: Rename 'platdata' variables to just 'plat'

We use 'priv' for private data but often use 'platdata' for platform data.
We can't really use 'pdata' since that is ambiguous (it could mean private
or platform data).

Rename some of the latter variables to end with 'plat' for consistency.

Signed-off-by: Simon Glass <sjg@chromium.org>

dm: Drop uses of dev_set_of_offset()

The need for this can be avoided by passing the correct node to the
device_bind() function.

Signed-off-by: Simon Glass <sjg@chromium.org>

dm: Remove uses of device_bind_offset()

This function is not needed since the standard device_bind() can be used
instead.

Signed-off-by: Simon Glass <sjg@chromium.org>

dm: core: Rename device_bind() to device_bind_offset()

This function is not necessary anymore, since device_bind_ofnode() does
the same thing and works with both flattree and livetree.

Rename it to indicate that it is special.

Signed-off-by: Simon Glass <sjg@chromium.org>

dm: Use access methods for dev/uclass private data

Most drivers use these access methods but a few do not. Update them.

In some cases the access is not permitted, so mark those with a FIXME tag
for the maintainer to check.

Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Pratyush Yadav <p.yadav@ti.com>

dm: treewide: Rename ..._platdata variables to just ..._plat

Try to maintain some consistency between these variables by using _plat as
a suffix for them.

Signed-off-by: Simon Glass <sjg@chromium.org>

dm: treewide: Rename 'platdata' variables to just 'plat'

We use 'priv' for private data but often use 'platdata' for platform data.
We can't really use 'pdata' since that is ambiguous (it could mean private
or platform data).

Rename some of the latter variables to end with 'plat' for consistency.

Signed-off-by: Simon Glass <sjg@chromium.org>

dm: Drop uses of dev_set_of_offset()

The need for this can be avoided by passing the correct node to the
device_bind() function.

Signed-off-by: Simon Glass <sjg@chromium.org>

dm: Remove uses of device_bind_offset()

This function is not needed since the standard device_bind() can be used
instead.

Signed-off-by: Simon Glass <sjg@chromium.org>

dm: core: Rename device_bind() to device_bind_offset()

This function is not necessary anymore, since device_bind_ofnode() does
the same thing and works with both flattree and livetree.

Rename it to indicate that it is special.

Signed-off-by: Simon Glass <sjg@chromium.org>

dm: Use access methods for dev/uclass private data

Most drivers use these access methods but a few do not. Update them.

In some cases the access is not permitted, so mark those with a FIXME tag
for the maintainer to check.

Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Pratyush Yadav <p.yadav@ti.com>

dm: treewide: Rename ..._platdata variables to just ..._plat

Try to maintain some consistency between these variables by using _plat as
a suffix for them.

Signed-off-by: Simon Glass <sjg@chromium.org>

dm: treewide: Rename 'platdata' variables to just 'plat'

We use 'priv' for private data but often use 'platdata' for platform data.
We can't really use 'pdata' since that is ambiguous (it could mean private
or platform data).

Rename some of the latter variables to end with 'plat' for consistency.

Signed-off-by: Simon Glass <sjg@chromium.org>

dm: Drop uses of dev_set_of_offset()

The need for this can be avoided by passing the correct node to the
device_bind() function.

Signed-off-by: Simon Glass <sjg@chromium.org>

dm: Remove uses of device_bind_offset()

This function is not needed since the standard device_bind() can be used
instead.

Signed-off-by: Simon Glass <sjg@chromium.org>

dm: core: Rename device_bind() to device_bind_offset()

This function is not necessary anymore, since device_bind_ofnode() does
the same thing and works with both flattree and livetree.

Rename it to indicate that it is special.

Signed-off-by: Simon Glass <sjg@chromium.org>

dm: Use access methods for dev/uclass private data

Most drivers use these access methods but a few do not. Update them.

In some cases the access is not permitted, so mark those with a FIXME tag
for the maintainer to check.

Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Pratyush Yadav <p.yadav@ti.com>

dm: treewide: Rename ..._platdata variables to just ..._plat

Try to maintain some consistency between these variables by using _plat as
a suffix for them.

Signed-off-by: Simon Glass <sjg@chromium.org>

dm: treewide: Rename 'platdata' variables to just 'plat'

We use 'priv' for private data but often use 'platdata' for platform data.
We can't really use 'pdata' since that is ambiguous (it could mean private
or platform data).

Rename some of the latter variables to end with 'plat' for consistency.

Signed-off-by: Simon Glass <sjg@chromium.org>

dm: Drop uses of dev_set_of_offset()

The need for this can be avoided by passing the correct node to the
device_bind() function.

Signed-off-by: Simon Glass <sjg@chromium.org>

dm: Remove uses of device_bind_offset()

This function is not needed since the standard device_bind() can be used
instead.

Signed-off-by: Simon Glass <sjg@chromium.org>

dm: core: Rename device_bind() to device_bind_offset()

This function is not necessary anymore, since device_bind_ofnode() does
the same thing and works with both flattree and livetree.

Rename it to indicate that it is special.

Signed-off-by: Simon Glass <sjg@chromium.org>

dm: Use access methods for dev/uclass private data

Most drivers use these access methods but a few do not. Update them.

In some cases the access is not permitted, so mark those with a FIXME tag
for the maintainer to check.

Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Pratyush Yadav <p.yadav@ti.com>

dm: treewide: Rename ..._platdata variables to just ..._plat

Try to maintain some consistency between these variables by using _plat as
a suffix for them.

Signed-off-by: Simon Glass <sjg@chromium.org>

dm: treewide: Rename 'platdata' variables to just 'plat'

We use 'priv' for private data but often use 'platdata' for platform data.
We can't really use 'pdata' since that is ambiguous (it could mean private
or platform data).

Rename some of the latter variables to end with 'plat' for consistency.

Signed-off-by: Simon Glass <sjg@chromium.org>

dm: Drop uses of dev_set_of_offset()

The need for this can be avoided by passing the correct node to the
device_bind() function.

Signed-off-by: Simon Glass <sjg@chromium.org>

dm: Remove uses of device_bind_offset()

This function is not needed since the standard device_bind() can be used
instead.

Signed-off-by: Simon Glass <sjg@chromium.org>

dm: core: Rename device_bind() to device_bind_offset()

This function is not necessary anymore, since device_bind_ofnode() does
the same thing and works with both flattree and livetree.

Rename it to indicate that it is special.

Signed-off-by: Simon Glass <sjg@chromium.org>

dm: Use access methods for dev/uclass private data

Most drivers use these access methods but a few do not. Update them.

In some cases the access is not permitted, so mark those with a FIXME tag
for the maintainer to check.

Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Pratyush Yadav <p.yadav@ti.com>

dm: treewide: Rename ..._platdata variables to just ..._plat

Try to maintain some consistency between these variables by using _plat as
a suffix for them.

Signed-off-by: Simon Glass <sjg@chromium.org>

dm: treewide: Rename 'platdata' variables to just 'plat'

We use 'priv' for private data but often use 'platdata' for platform data.
We can't really use 'pdata' since that is ambiguous (it could mean private
or platform data).

Rename some of the latter variables to end with 'plat' for consistency.

Signed-off-by: Simon Glass <sjg@chromium.org>

dm: Drop uses of dev_set_of_offset()

The need for this can be avoided by passing the correct node to the
device_bind() function.

Signed-off-by: Simon Glass <sjg@chromium.org>

dm: Remove uses of device_bind_offset()

This function is not needed since the standard device_bind() can be used
instead.

Signed-off-by: Simon Glass <sjg@chromium.org>

dm: core: Rename device_bind() to device_bind_offset()

This function is not necessary anymore, since device_bind_ofnode() does
the same thing and works with both flattree and livetree.

Rename it to indicate that it is special.

Signed-off-by: Simon Glass <sjg@chromium.org>

dm: Use access methods for dev/uclass private data

Most drivers use these access methods but a few do not. Update them.

In some cases the access is not permitted, so mark those with a FIXME tag
for the maintainer to check.

Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Pratyush Yadav <p.yadav@ti.com>

dm: treewide: Rename ..._platdata variables to just ..._plat

Try to maintain some consistency between these variables by using _plat as
a suffix for them.

Signed-off-by: Simon Glass <sjg@chromium.org>

dm: treewide: Rename 'platdata' variables to just 'plat'

We use 'priv' for private data but often use 'platdata' for platform data.
We can't really use 'pdata' since that is ambiguous (it could mean private
or platform data).

Rename some of the latter variables to end with 'plat' for consistency.

Signed-off-by: Simon Glass <sjg@chromium.org>

dm: Drop uses of dev_set_of_offset()

The need for this can be avoided by passing the correct node to the
device_bind() function.

Signed-off-by: Simon Glass <sjg@chromium.org>

dm: Remove uses of device_bind_offset()

This function is not needed since the standard device_bind() can be used
instead.

Signed-off-by: Simon Glass <sjg@chromium.org>

dm: core: Rename device_bind() to device_bind_offset()

This function is not necessary anymore, since device_bind_ofnode() does
the same thing and works with both flattree and livetree.

Rename it to indicate that it is special.

Signed-off-by: Simon Glass <sjg@chromium.org>

dm: Use access methods for dev/uclass private data

Most drivers use these access methods but a few do not. Update them.

In some cases the access is not permitted, so mark those with a FIXME tag
for the maintainer to check.

Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Pratyush Yadav <p.yadav@ti.com>

dm: treewide: Rename ..._platdata variables to just ..._plat

Try to maintain some consistency between these variables by using _plat as
a suffix for them.

Signed-off-by: Simon Glass <sjg@chromium.org>

dm: treewide: Rename 'platdata' variables to just 'plat'

We use 'priv' for private data but often use 'platdata' for platform data.
We can't really use 'pdata' since that is ambiguous (it could mean private
or platform data).

Rename some of the latter variables to end with 'plat' for consistency.

Signed-off-by: Simon Glass <sjg@chromium.org>

dm: Drop uses of dev_set_of_offset()

The need for this can be avoided by passing the correct node to the
device_bind() function.

Signed-off-by: Simon Glass <sjg@chromium.org>

dm: Remove uses of device_bind_offset()

This function is not needed since the standard device_bind() can be used
instead.

Signed-off-by: Simon Glass <sjg@chromium.org>

dm: core: Rename device_bind() to device_bind_offset()

This function is not necessary anymore, since device_bind_ofnode() does
the same thing and works with both flattree and livetree.

Rename it to indicate that it is special.

Signed-off-by: Simon Glass <sjg@chromium.org>

dm: Use access methods for dev/uclass private data

Most drivers use these access methods but a few do not. Update them.

In some cases the access is not permitted, so mark those with a FIXME tag
for the maintainer to check.

Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Pratyush Yadav <p.yadav@ti.com>

dm: treewide: Rename ..._platdata variables to just ..._plat

Try to maintain some consistency between these variables by using _plat as
a suffix for them.

Signed-off-by: Simon Glass <sjg@chromium.org>

dm: treewide: Rename 'platdata' variables to just 'plat'

We use 'priv' for private data but often use 'platdata' for platform data.
We can't really use 'pdata' since that is ambiguous (it could mean private
or platform data).

Rename some of the latter variables to end with 'plat' for consistency.

Signed-off-by: Simon Glass <sjg@chromium.org>

dm: Drop uses of dev_set_of_offset()

The need for this can be avoided by passing the correct node to the
device_bind() function.

Signed-off-by: Simon Glass <sjg@chromium.org>

dm: Remove uses of device_bind_offset()

This function is not needed since the standard device_bind() can be used
instead.

Signed-off-by: Simon Glass <sjg@chromium.org>

dm: core: Rename device_bind() to device_bind_offset()

This function is not necessary anymore, since device_bind_ofnode() does
the same thing and works with both flattree and livetree.

Rename it to indicate that it is special.

Signed-off-by: Simon Glass <sjg@chromium.org>

dm: Use access methods for dev/uclass private data

Most drivers use these access methods but a few do not. Update them.

In some cases the access is not permitted, so mark those with a FIXME tag
for the maintainer to check.

Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Pratyush Yadav <p.yadav@ti.com>

dm: treewide: Rename ..._platdata variables to just ..._plat

Try to maintain some consistency between these variables by using _plat as
a suffix for them.

Signed-off-by: Simon Glass <sjg@chromium.org>

dm: treewide: Rename 'platdata' variables to just 'plat'

We use 'priv' for private data but often use 'platdata' for platform data.
We can't really use 'pdata' since that is ambiguous (it could mean private
or platform data).

Rename some of the latter variables to end with 'plat' for consistency.

Signed-off-by: Simon Glass <sjg@chromium.org>

dm: Drop uses of dev_set_of_offset()

The need for this can be avoided by passing the correct node to the
device_bind() function.

Signed-off-by: Simon Glass <sjg@chromium.org>

dm: Remove uses of device_bind_offset()

This function is not needed since the standard device_bind() can be used
instead.

Signed-off-by: Simon Glass <sjg@chromium.org>

dm: core: Rename device_bind() to device_bind_offset()

This function is not necessary anymore, since device_bind_ofnode() does
the same thing and works with both flattree and livetree.

Rename it to indicate that it is special.

Signed-off-by: Simon Glass <sjg@chromium.org>

dm: Use access methods for dev/uclass private data

Most drivers use these access methods but a few do not. Update them.

In some cases the access is not permitted, so mark those with a FIXME tag
for the maintainer to check.

Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Pratyush Yadav <p.yadav@ti.com>

dm: treewide: Rename ..._platdata variables to just ..._plat

Try to maintain some consistency between these variables by using _plat as
a suffix for them.

Signed-off-by: Simon Glass <sjg@chromium.org>

dm: treewide: Rename 'platdata' variables to just 'plat'

We use 'priv' for private data but often use 'platdata' for platform data.
We can't really use 'pdata' since that is ambiguous (it could mean private
or platform data).

Rename some of the latter variables to end with 'plat' for consistency.

Signed-off-by: Simon Glass <sjg@chromium.org>

dm: Drop uses of dev_set_of_offset()

The need for this can be avoided by passing the correct node to the
device_bind() function.

Signed-off-by: Simon Glass <sjg@chromium.org>

dm: Remove uses of device_bind_offset()

This function is not needed since the standard device_bind() can be used
instead.

Signed-off-by: Simon Glass <sjg@chromium.org>

dm: core: Rename device_bind() to device_bind_offset()

This function is not necessary anymore, since device_bind_ofnode() does
the same thing and works with both flattree and livetree.

Rename it to indicate that it is special.

Signed-off-by: Simon Glass <sjg@chromium.org>

dm: Use access methods for dev/uclass private data

Most drivers use these access methods but a few do not. Update them.

In some cases the access is not permitted, so mark those with a FIXME tag
for the maintainer to check.

Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Pratyush Yadav <p.yadav@ti.com>

dm: treewide: Rename ..._platdata variables to just ..._plat

Try to maintain some consistency between these variables by using _plat as
a suffix for them.

Signed-off-by: Simon Glass <sjg@chromium.org>

dm: treewide: Rename 'platdata' variables to just 'plat'

We use 'priv' for private data but often use 'platdata' for platform data.
We can't really use 'pdata' since that is ambiguous (it could mean private
or platform data).

Rename some of the latter variables to end with 'plat' for consistency.

Signed-off-by: Simon Glass <sjg@chromium.org>

dm: Drop uses of dev_set_of_offset()

The need for this can be avoided by passing the correct node to the
device_bind() function.

Signed-off-by: Simon Glass <sjg@chromium.org>

dm: Remove uses of device_bind_offset()

This function is not needed since the standard device_bind() can be used
instead.

Signed-off-by: Simon Glass <sjg@chromium.org>

dm: core: Rename device_bind() to device_bind_offset()

This function is not necessary anymore, since device_bind_ofnode() does
the same thing and works with both flattree and livetree.

Rename it to indicate that it is special.

Signed-off-by: Simon Glass <sjg@chromium.org>

dm: Use access methods for dev/uclass private data

Most drivers use these access methods but a few do not. Update them.

In some cases the access is not permitted, so mark those with a FIXME tag
for the maintainer to check.

Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Pratyush Yadav <p.yadav@ti.com>

dm: treewide: Rename ..._platdata variables to just ..._plat

Try to maintain some consistency between these variables by using _plat as
a suffix for them.

Signed-off-by: Simon Glass <sjg@chromium.org>

dm: treewide: Rename 'platdata' variables to just 'plat'

We use 'priv' for private data but often use 'platdata' for platform data.
We can't really use 'pdata' since that is ambiguous (it could mean private
or platform data).

Rename some of the latter variables to end with 'plat' for consistency.

Signed-off-by: Simon Glass <sjg@chromium.org>

dm: Drop uses of dev_set_of_offset()

The need for this can be avoided by passing the correct node to the
device_bind() function.

Signed-off-by: Simon Glass <sjg@chromium.org>

dm: Remove uses of device_bind_offset()

This function is not needed since the standard device_bind() can be used
instead.

Signed-off-by: Simon Glass <sjg@chromium.org>

dm: core: Rename device_bind() to device_bind_offset()

This function is not necessary anymore, since device_bind_ofnode() does
the same thing and works with both flattree and livetree.

Rename it to indicate that it is special.

Signed-off-by: Simon Glass <sjg@chromium.org>

dm: Use access methods for dev/uclass private data

Most drivers use these access methods but a few do not. Update them.

In some cases the access is not permitted, so mark those with a FIXME tag
for the maintainer to check.

Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Pratyush Yadav <p.yadav@ti.com>

dm: treewide: Rename ..._platdata variables to just ..._plat

Try to maintain some consistency between these variables by using _plat as
a suffix for them.

Signed-off-by: Simon Glass <sjg@chromium.org>

dm: treewide: Rename 'platdata' variables to just 'plat'

We use 'priv' for private data but often use 'platdata' for platform data.
We can't really use 'pdata' since that is ambiguous (it could mean private
or platform data).

Rename some of the latter variables to end with 'plat' for consistency.

Signed-off-by: Simon Glass <sjg@chromium.org>

dm: Drop uses of dev_set_of_offset()

The need for this can be avoided by passing the correct node to the
device_bind() function.

Signed-off-by: Simon Glass <sjg@chromium.org>

dm: Remove uses of device_bind_offset()

This function is not needed since the standard device_bind() can be used
instead.

Signed-off-by: Simon Glass <sjg@chromium.org>

dm: core: Rename device_bind() to device_bind_offset()

This function is not necessary anymore, since device_bind_ofnode() does
the same thing and works with both flattree and livetree.

Rename it to indicate that it is special.

Signed-off-by: Simon Glass <sjg@chromium.org>

dm: Use access methods for dev/uclass private data

Most drivers use these access methods but a few do not. Update them.

In some cases the access is not permitted, so mark those with a FIXME tag
for the maintainer to check.

Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Pratyush Yadav <p.yadav@ti.com>

dm: treewide: Rename ..._platdata variables to just ..._plat

Try to maintain some consistency between these variables by using _plat as
a suffix for them.

Signed-off-by: Simon Glass <sjg@chromium.org>

dm: treewide: Rename 'platdata' variables to just 'plat'

We use 'priv' for private data but often use 'platdata' for platform data.
We can't really use 'pdata' since that is ambiguous (it could mean private
or platform data).

Rename some of the latter variables to end with 'plat' for consistency.

Signed-off-by: Simon Glass <sjg@chromium.org>

dm: Drop uses of dev_set_of_offset()

The need for this can be avoided by passing the correct node to the
device_bind() function.

Signed-off-by: Simon Glass <sjg@chromium.org>

dm: Remove uses of device_bind_offset()

This function is not needed since the standard device_bind() can be used
instead.

Signed-off-by: Simon Glass <sjg@chromium.org>

dm: core: Rename device_bind() to device_bind_offset()

This function is not necessary anymore, since device_bind_ofnode() does
the same thing and works with both flattree and livetree.

Rename it to indicate that it is special.

Signed-off-by: Simon Glass <sjg@chromium.org>

dm: Use access methods for dev/uclass private data

Most drivers use these access methods but a few do not. Update them.

In some cases the access is not permitted, so mark those with a FIXME tag
for the maintainer to check.

Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Pratyush Yadav <p.yadav@ti.com>

dm: treewide: Rename ..._platdata variables to just ..._plat

Try to maintain some consistency between these variables by using _plat as
a suffix for them.

Signed-off-by: Simon Glass <sjg@chromium.org>

dm: treewide: Rename 'platdata' variables to just 'plat'

We use 'priv' for private data but often use 'platdata' for platform data.
We can't really use 'pdata' since that is ambiguous (it could mean private
or platform data).

Rename some of the latter variables to end with 'plat' for consistency.

Signed-off-by: Simon Glass <sjg@chromium.org>

dm: Drop uses of dev_set_of_offset()

The need for this can be avoided by passing the correct node to the
device_bind() function.

Signed-off-by: Simon Glass <sjg@chromium.org>

dm: Remove uses of device_bind_offset()

This function is not needed since the standard device_bind() can be used
instead.

Signed-off-by: Simon Glass <sjg@chromium.org>

dm: core: Rename device_bind() to device_bind_offset()

This function is not necessary anymore, since device_bind_ofnode() does
the same thing and works with both flattree and livetree.

Rename it to indicate that it is special.

Signed-off-by: Simon Glass <sjg@chromium.org>

dm: Use access methods for dev/uclass private data

Most drivers use these access methods but a few do not. Update them.

In some cases the access is not permitted, so mark those with a FIXME tag
for the maintainer to check.

Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Pratyush Yadav <p.yadav@ti.com>

dm: treewide: Rename ..._platdata variables to just ..._plat

Try to maintain some consistency between these variables by using _plat as
a suffix for them.

Signed-off-by: Simon Glass <sjg@chromium.org>

dm: treewide: Rename 'platdata' variables to just 'plat'

We use 'priv' for private data but often use 'platdata' for platform data.
We can't really use 'pdata' since that is ambiguous (it could mean private
or platform data).

Rename some of the latter variables to end with 'plat' for consistency.

Signed-off-by: Simon Glass <sjg@chromium.org>

dm: Drop uses of dev_set_of_offset()

The need for this can be avoided by passing the correct node to the
device_bind() function.

Signed-off-by: Simon Glass <sjg@chromium.org>

dm: Remove uses of device_bind_offset()

This function is not needed since the standard device_bind() can be used
instead.

Signed-off-by: Simon Glass <sjg@chromium.org>

dm: core: Rename device_bind() to device_bind_offset()

This function is not necessary anymore, since device_bind_ofnode() does
the same thing and works with both flattree and livetree.

Rename it to indicate that it is special.

Signed-off-by: Simon Glass <sjg@chromium.org>

dm: Use access methods for dev/uclass private data

Most drivers use these access methods but a few do not. Update them.

In some cases the access is not permitted, so mark those with a FIXME tag
for the maintainer to check.

Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Pratyush Yadav <p.yadav@ti.com>

dm: treewide: Rename ..._platdata variables to just ..._plat

Try to maintain some consistency between these variables by using _plat as
a suffix for them.

Signed-off-by: Simon Glass <sjg@chromium.org>

dm: treewide: Rename 'platdata' variables to just 'plat'

We use 'priv' for private data but often use 'platdata' for platform data.
We can't really use 'pdata' since that is ambiguous (it could mean private
or platform data).

Rename some of the latter variables to end with 'plat' for consistency.

Signed-off-by: Simon Glass <sjg@chromium.org>

dm: Drop uses of dev_set_of_offset()

The need for this can be avoided by passing the correct node to the
device_bind() function.

Signed-off-by: Simon Glass <sjg@chromium.org>

dm: Remove uses of device_bind_offset()

This function is not needed since the standard device_bind() can be used
instead.

Signed-off-by: Simon Glass <sjg@chromium.org>

dm: core: Rename device_bind() to device_bind_offset()

This function is not necessary anymore, since device_bind_ofnode() does
the same thing and works with both flattree and livetree.

Rename it to indicate that it is special.

Signed-off-by: Simon Glass <sjg@chromium.org>

dm: Use access methods for dev/uclass private data

Most drivers use these access methods but a few do not. Update them.

In some cases the access is not permitted, so mark those with a FIXME tag
for the maintainer to check.

Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Pratyush Yadav <p.yadav@ti.com>

dm: treewide: Rename ..._platdata variables to just ..._plat

Try to maintain some consistency between these variables by using _plat as
a suffix for them.

Signed-off-by: Simon Glass <sjg@chromium.org>

dm: treewide: Rename 'platdata' variables to just 'plat'

We use 'priv' for private data but often use 'platdata' for platform data.
We can't really use 'pdata' since that is ambiguous (it could mean private
or platform data).

Rename some of the latter variables to end with 'plat' for consistency.

Signed-off-by: Simon Glass <sjg@chromium.org>

dm: Drop uses of dev_set_of_offset()

The need for this can be avoided by passing the correct node to the
device_bind() function.

Signed-off-by: Simon Glass <sjg@chromium.org>

dm: Remove uses of device_bind_offset()

This function is not needed since the standard device_bind() can be used
instead.

Signed-off-by: Simon Glass <sjg@chromium.org>

dm: core: Rename device_bind() to device_bind_offset()

This function is not necessary anymore, since device_bind_ofnode() does
the same thing and works with both flattree and livetree.

Rename it to indicate that it is special.

Signed-off-by: Simon Glass <sjg@chromium.org>

dm: Use access methods for dev/uclass private data

Most drivers use these access methods but a few do not. Update them.

In some cases the access is not permitted, so mark those with a FIXME tag
for the maintainer to check.

Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Pratyush Yadav <p.yadav@ti.com>

dm: treewide: Rename ..._platdata variables to just ..._plat

Try to maintain some consistency between these variables by using _plat as
a suffix for them.

Signed-off-by: Simon Glass <sjg@chromium.org>

dm: treewide: Rename 'platdata' variables to just 'plat'

We use 'priv' for private data but often use 'platdata' for platform data.
We can't really use 'pdata' since that is ambiguous (it could mean private
or platform data).

Rename some of the latter variables to end with 'plat' for consistency.

Signed-off-by: Simon Glass <sjg@chromium.org>

dm: Drop uses of dev_set_of_offset()

The need for this can be avoided by passing the correct node to the
device_bind() function.

Signed-off-by: Simon Glass <sjg@chromium.org>

dm: Remove uses of device_bind_offset()

This function is not needed since the standard device_bind() can be used
instead.

Signed-off-by: Simon Glass <sjg@chromium.org>

dm: core: Rename device_bind() to device_bind_offset()

This function is not necessary anymore, since device_bind_ofnode() does
the same thing and works with both flattree and livetree.

Rename it to indicate that it is special.

Signed-off-by: Simon Glass <sjg@chromium.org>

dm: Use access methods for dev/uclass private data

Most drivers use these access methods but a few do not. Update them.

In some cases the access is not permitted, so mark those with a FIXME tag
for the maintainer to check.

Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Pratyush Yadav <p.yadav@ti.com>

dm: treewide: Rename ..._platdata variables to just ..._plat

Try to maintain some consistency between these variables by using _plat as
a suffix for them.

Signed-off-by: Simon Glass <sjg@chromium.org>

dm: treewide: Rename 'platdata' variables to just 'plat'

We use 'priv' for private data but often use 'platdata' for platform data.
We can't really use 'pdata' since that is ambiguous (it could mean private
or platform data).

Rename some of the latter variables to end with 'plat' for consistency.

Signed-off-by: Simon Glass <sjg@chromium.org>

dm: Drop uses of dev_set_of_offset()

The need for this can be avoided by passing the correct node to the
device_bind() function.

Signed-off-by: Simon Glass <sjg@chromium.org>

dm: Remove uses of device_bind_offset()

This function is not needed since the standard device_bind() can be used
instead.

Signed-off-by: Simon Glass <sjg@chromium.org>

dm: core: Rename device_bind() to device_bind_offset()

This function is not necessary anymore, since device_bind_ofnode() does
the same thing and works with both flattree and livetree.

Rename it to indicate that it is special.

Signed-off-by: Simon Glass <sjg@chromium.org>

dm: Use access methods for dev/uclass private data

Most drivers use these access methods but a few do not. Update them.

In some cases the access is not permitted, so mark those with a FIXME tag
for the maintainer to check.

Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Pratyush Yadav <p.yadav@ti.com>

dm: treewide: Rename ..._platdata variables to just ..._plat

Try to maintain some consistency between these variables by using _plat as
a suffix for them.

Signed-off-by: Simon Glass <sjg@chromium.org>

dm: treewide: Rename 'platdata' variables to just 'plat'

We use 'priv' for private data but often use 'platdata' for platform data.
We can't really use 'pdata' since that is ambiguous (it could mean private
or platform data).

Rename some of the latter variables to end with 'plat' for consistency.

Signed-off-by: Simon Glass <sjg@chromium.org>

dm: Drop uses of dev_set_of_offset()

The need for this can be avoided by passing the correct node to the
device_bind() function.

Signed-off-by: Simon Glass <sjg@chromium.org>

dm: Remove uses of device_bind_offset()

This function is not needed since the standard device_bind() can be used
instead.

Signed-off-by: Simon Glass <sjg@chromium.org>

dm: core: Rename device_bind() to device_bind_offset()

This function is not necessary anymore, since device_bind_ofnode() does
the same thing and works with both flattree and livetree.

Rename it to indicate that it is special.

Signed-off-by: Simon Glass <sjg@chromium.org>

dm: Use access methods for dev/uclass private data

Most drivers use these access methods but a few do not. Update them.

In some cases the access is not permitted, so mark those with a FIXME tag
for the maintainer to check.

Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Pratyush Yadav <p.yadav@ti.com>

dm: treewide: Rename ..._platdata variables to just ..._plat

Try to maintain some consistency between these variables by using _plat as
a suffix for them.

Signed-off-by: Simon Glass <sjg@chromium.org>

dm: treewide: Rename 'platdata' variables to just 'plat'

We use 'priv' for private data but often use 'platdata' for platform data.
We can't really use 'pdata' since that is ambiguous (it could mean private
or platform data).

Rename some of the latter variables to end with 'plat' for consistency.

Signed-off-by: Simon Glass <sjg@chromium.org>

dm: Drop uses of dev_set_of_offset()

The need for this can be avoided by passing the correct node to the
device_bind() function.

Signed-off-by: Simon Glass <sjg@chromium.org>

dm: Remove uses of device_bind_offset()

This function is not needed since the standard device_bind() can be used
instead.

Signed-off-by: Simon Glass <sjg@chromium.org>

dm: core: Rename device_bind() to device_bind_offset()

This function is not necessary anymore, since device_bind_ofnode() does
the same thing and works with both flattree and livetree.

Rename it to indicate that it is special.

Signed-off-by: Simon Glass <sjg@chromium.org>

dm: Use access methods for dev/uclass private data

Most drivers use these access methods but a few do not. Update them.

In some cases the access is not permitted, so mark those with a FIXME tag
for the maintainer to check.

Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Pratyush Yadav <p.yadav@ti.com>

dm: treewide: Rename ..._platdata variables to just ..._plat

Try to maintain some consistency between these variables by using _plat as
a suffix for them.

Signed-off-by: Simon Glass <sjg@chromium.org>

dm: treewide: Rename 'platdata' variables to just 'plat'

We use 'priv' for private data but often use 'platdata' for platform data.
We can't really use 'pdata' since that is ambiguous (it could mean private
or platform data).

Rename some of the latter variables to end with 'plat' for consistency.

Signed-off-by: Simon Glass <sjg@chromium.org>

dm: Drop uses of dev_set_of_offset()

The need for this can be avoided by passing the correct node to the
device_bind() function.

Signed-off-by: Simon Glass <sjg@chromium.org>

dm: Remove uses of device_bind_offset()

This function is not needed since the standard device_bind() can be used
instead.

Signed-off-by: Simon Glass <sjg@chromium.org>

dm: core: Rename device_bind() to device_bind_offset()

This function is not necessary anymore, since device_bind_ofnode() does
the same thing and works with both flattree and livetree.

Rename it to indicate that it is special.

Signed-off-by: Simon Glass <sjg@chromium.org>

dm: Use access methods for dev/uclass private data

Most drivers use these access methods but a few do not. Update them.

In some cases the access is not permitted, so mark those with a FIXME tag
for the maintainer to check.

Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Pratyush Yadav <p.yadav@ti.com>

dm: treewide: Rename ..._platdata variables to just ..._plat

Try to maintain some consistency between these variables by using _plat as
a suffix for them.

Signed-off-by: Simon Glass <sjg@chromium.org>

dm: treewide: Rename 'platdata' variables to just 'plat'

We use 'priv' for private data but often use 'platdata' for platform data.
We can't really use 'pdata' since that is ambiguous (it could mean private
or platform data).

Rename some of the latter variables to end with 'plat' for consistency.

Signed-off-by: Simon Glass <sjg@chromium.org>

dm: Drop uses of dev_set_of_offset()

The need for this can be avoided by passing the correct node to the
device_bind() function.

Signed-off-by: Simon Glass <sjg@chromium.org>

dm: Remove uses of device_bind_offset()

This function is not needed since the standard device_bind() can be used
instead.

Signed-off-by: Simon Glass <sjg@chromium.org>

dm: core: Rename device_bind() to device_bind_offset()

This function is not necessary anymore, since device_bind_ofnode() does
the same thing and works with both flattree and livetree.

Rename it to indicate that it is special.

Signed-off-by: Simon Glass <sjg@chromium.org>

dm: Use access methods for dev/uclass private data

Most drivers use these access methods but a few do not. Update them.

In some cases the access is not permitted, so mark those with a FIXME tag
for the maintainer to check.

Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Pratyush Yadav <p.yadav@ti.com>

dm: treewide: Rename ..._platdata variables to just ..._plat

Try to maintain some consistency between these variables by using _plat as
a suffix for them.

Signed-off-by: Simon Glass <sjg@chromium.org>

dm: treewide: Rename 'platdata' variables to just 'plat'

We use 'priv' for private data but often use 'platdata' for platform data.
We can't really use 'pdata' since that is ambiguous (it could mean private
or platform data).

Rename some of the latter variables to end with 'plat' for consistency.

Signed-off-by: Simon Glass <sjg@chromium.org>

dm: Drop uses of dev_set_of_offset()

The need for this can be avoided by passing the correct node to the
device_bind() function.

Signed-off-by: Simon Glass <sjg@chromium.org>

dm: Remove uses of device_bind_offset()

This function is not needed since the standard device_bind() can be used
instead.

Signed-off-by: Simon Glass <sjg@chromium.org>

dm: core: Rename device_bind() to device_bind_offset()

This function is not necessary anymore, since device_bind_ofnode() does
the same thing and works with both flattree and livetree.

Rename it to indicate that it is special.

Signed-off-by: Simon Glass <sjg@chromium.org>

dm: Use access methods for dev/uclass private data

Most drivers use these access methods but a few do not. Update them.

In some cases the access is not permitted, so mark those with a FIXME tag
for the maintainer to check.

Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Pratyush Yadav <p.yadav@ti.com>

dm: treewide: Rename ..._platdata variables to just ..._plat

Try to maintain some consistency between these variables by using _plat as
a suffix for them.

Signed-off-by: Simon Glass <sjg@chromium.org>

dm: treewide: Rename 'platdata' variables to just 'plat'

We use 'priv' for private data but often use 'platdata' for platform data.
We can't really use 'pdata' since that is ambiguous (it could mean private
or platform data).

Rename some of the latter variables to end with 'plat' for consistency.

Signed-off-by: Simon Glass <sjg@chromium.org>

dm: Drop uses of dev_set_of_offset()

The need for this can be avoided by passing the correct node to the
device_bind() function.

Signed-off-by: Simon Glass <sjg@chromium.org>

dm: Remove uses of device_bind_offset()

This function is not needed since the standard device_bind() can be used
instead.

Signed-off-by: Simon Glass <sjg@chromium.org>

dm: core: Rename device_bind() to device_bind_offset()

This function is not necessary anymore, since device_bind_ofnode() does
the same thing and works with both flattree and livetree.

Rename it to indicate that it is special.

Signed-off-by: Simon Glass <sjg@chromium.org>

dm: Use access methods for dev/uclass private data

Most drivers use these access methods but a few do not. Update them.

In some cases the access is not permitted, so mark those with a FIXME tag
for the maintainer to check.

Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Pratyush Yadav <p.yadav@ti.com>

dm: treewide: Rename ..._platdata variables to just ..._plat

Try to maintain some consistency between these variables by using _plat as
a suffix for them.

Signed-off-by: Simon Glass <sjg@chromium.org>

dm: treewide: Rename 'platdata' variables to just 'plat'

We use 'priv' for private data but often use 'platdata' for platform data.
We can't really use 'pdata' since that is ambiguous (it could mean private
or platform data).

Rename some of the latter variables to end with 'plat' for consistency.

Signed-off-by: Simon Glass <sjg@chromium.org>

dm: Drop uses of dev_set_of_offset()

The need for this can be avoided by passing the correct node to the
device_bind() function.

Signed-off-by: Simon Glass <sjg@chromium.org>

dm: Remove uses of device_bind_offset()

This function is not needed since the standard device_bind() can be used
instead.

Signed-off-by: Simon Glass <sjg@chromium.org>

dm: core: Rename device_bind() to device_bind_offset()

This function is not necessary anymore, since device_bind_ofnode() does
the same thing and works with both flattree and livetree.

Rename it to indicate that it is special.

Signed-off-by: Simon Glass <sjg@chromium.org>

dm: Use access methods for dev/uclass private data

Most drivers use these access methods but a few do not. Update them.

In some cases the access is not permitted, so mark those with a FIXME tag
for the maintainer to check.

Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Pratyush Yadav <p.yadav@ti.com>

dm: treewide: Rename ..._platdata variables to just ..._plat

Try to maintain some consistency between these variables by using _plat as
a suffix for them.

Signed-off-by: Simon Glass <sjg@chromium.org>

dm: treewide: Rename 'platdata' variables to just 'plat'

We use 'priv' for private data but often use 'platdata' for platform data.
We can't really use 'pdata' since that is ambiguous (it could mean private
or platform data).

Rename some of the latter variables to end with 'plat' for consistency.

Signed-off-by: Simon Glass <sjg@chromium.org>

dm: Drop uses of dev_set_of_offset()

The need for this can be avoided by passing the correct node to the
device_bind() function.

Signed-off-by: Simon Glass <sjg@chromium.org>

dm: Remove uses of device_bind_offset()

This function is not needed since the standard device_bind() can be used
instead.

Signed-off-by: Simon Glass <sjg@chromium.org>

dm: core: Rename device_bind() to device_bind_offset()

This function is not necessary anymore, since device_bind_ofnode() does
the same thing and works with both flattree and livetree.

Rename it to indicate that it is special.

Signed-off-by: Simon Glass <sjg@chromium.org>

dm: Use access methods for dev/uclass private data

Most drivers use these access methods but a few do not. Update them.

In some cases the access is not permitted, so mark those with a FIXME tag
for the maintainer to check.

Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Pratyush Yadav <p.yadav@ti.com>

dm: treewide: Rename ..._platdata variables to just ..._plat

Try to maintain some consistency between these variables by using _plat as
a suffix for them.

Signed-off-by: Simon Glass <sjg@chromium.org>

dm: treewide: Rename 'platdata' variables to just 'plat'

We use 'priv' for private data but often use 'platdata' for platform data.
We can't really use 'pdata' since that is ambiguous (it could mean private
or platform data).

Rename some of the latter variables to end with 'plat' for consistency.

Signed-off-by: Simon Glass <sjg@chromium.org>

dm: Drop uses of dev_set_of_offset()

The need for this can be avoided by passing the correct node to the
device_bind() function.

Signed-off-by: Simon Glass <sjg@chromium.org>

dm: Remove uses of device_bind_offset()

This function is not needed since the standard device_bind() can be used
instead.

Signed-off-by: Simon Glass <sjg@chromium.org>

dm: core: Rename device_bind() to device_bind_offset()

This function is not necessary anymore, since device_bind_ofnode() does
the same thing and works with both flattree and livetree.

Rename it to indicate that it is special.

Signed-off-by: Simon Glass <sjg@chromium.org>

dm: Use access methods for dev/uclass private data

Most drivers use these access methods but a few do not. Update them.

In some cases the access is not permitted, so mark those with a FIXME tag
for the maintainer to check.

Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Pratyush Yadav <p.yadav@ti.com>

dm: treewide: Rename ..._platdata variables to just ..._plat

Try to maintain some consistency between these variables by using _plat as
a suffix for them.

Signed-off-by: Simon Glass <sjg@chromium.org>

dm: treewide: Rename 'platdata' variables to just 'plat'

We use 'priv' for private data but often use 'platdata' for platform data.
We can't really use 'pdata' since that is ambiguous (it could mean private
or platform data).

Rename some of the latter variables to end with 'plat' for consistency.

Signed-off-by: Simon Glass <sjg@chromium.org>

dm: Drop uses of dev_set_of_offset()

The need for this can be avoided by passing the correct node to the
device_bind() function.

Signed-off-by: Simon Glass <sjg@chromium.org>

dm: Remove uses of device_bind_offset()

This function is not needed since the standard device_bind() can be used
instead.

Signed-off-by: Simon Glass <sjg@chromium.org>

dm: core: Rename device_bind() to device_bind_offset()

This function is not necessary anymore, since device_bind_ofnode() does
the same thing and works with both flattree and livetree.

Rename it to indicate that it is special.

Signed-off-by: Simon Glass <sjg@chromium.org>

dm: Use access methods for dev/uclass private data

Most drivers use these access methods but a few do not. Update them.

In some cases the access is not permitted, so mark those with a FIXME tag
for the maintainer to check.

Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Pratyush Yadav <p.yadav@ti.com>