#
03de305e |
|
20-May-2024 |
Tom Rini <trini@konsulko.com> |
Restore patch series "arm: dts: am62-beagleplay: Fix Beagleplay Ethernet" As part of bringing the master branch back in to next, we need to allow for all of these changes to exist here. Reported-by: Jonas Karlman <jonas@kwiboo.se> Signed-off-by: Tom Rini <trini@konsulko.com> |
#
d678a59d |
|
18-May-2024 |
Tom Rini <trini@konsulko.com> |
Revert "Merge patch series "arm: dts: am62-beagleplay: Fix Beagleplay Ethernet"" When bringing in the series 'arm: dts: am62-beagleplay: Fix Beagleplay Ethernet"' I failed to notice that b4 noticed it was based on next and so took that as the base commit and merged that part of next to master. This reverts commit c8ffd1356d42223cbb8c86280a083cc3c93e6426, reversing changes made to 2ee6f3a5f7550de3599faef9704e166e5dcace35. Reported-by: Jonas Karlman <jonas@kwiboo.se> Signed-off-by: Tom Rini <trini@konsulko.com> |
#
6657851f |
|
01-May-2024 |
Tom Rini <trini@konsulko.com> |
gpio: Remove <common.h> and add needed includes Remove <common.h> from this driver directory and when needed add missing include files directly. Reviewed-by: Heiko Schocher <hs@denx.de> Reviewed-by: Peter Robinson <pbrobinson@gmail.com> Signed-off-by: Tom Rini <trini@konsulko.com> |
#
d710c7e8 |
|
11-Sep-2021 |
Bin Meng <bmeng.cn@gmail.com> |
gpio: sifive: Fix -Wint-to-pointer-cast warning dev_read_addr() returns a value of type fdt_addr_t which is a 64-bit address and plat->base is a pointer. In a 32-bit build, this causes the following warning seen when building sifive-gpio.c: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] Change to use dev_read_addr_ptr(). Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com> |
#
8a8d24bd |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename ..._platdata variables to just ..._plat Try to maintain some consistency between these variables by using _plat as a suffix for them. Signed-off-by: Simon Glass <sjg@chromium.org> |
#
d1998a9f |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename ofdata_to_platdata() to of_to_plat() This name is far too long. Rename it to remove the 'data' bits. This makes it consistent with the platdata->plat rename. Signed-off-by: Simon Glass <sjg@chromium.org> |
#
c69cda25 |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename dev_get_platdata() to dev_get_plat() Rename this to be consistent with the change from 'platdata'. Signed-off-by: Simon Glass <sjg@chromium.org> |
#
caa4daa2 |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename 'platdata' variables to just 'plat' We use 'priv' for private data but often use 'platdata' for platform data. We can't really use 'pdata' since that is ambiguous (it could mean private or platform data). Rename some of the latter variables to end with 'plat' for consistency. Signed-off-by: Simon Glass <sjg@chromium.org> |
#
41575d8e |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename auto_alloc_size members to be shorter This construct is quite long-winded. In earlier days it made some sense since auto-allocation was a strange concept. But with driver model now used pretty universally, we can shorten this to 'auto'. This reduces verbosity and makes it easier to read. Coincidentally it also ensures that every declaration is on one line, thus making dtoc's job easier. Signed-off-by: Simon Glass <sjg@chromium.org> |
#
2548493a |
|
16-Jul-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert devfdt_get_addr() to dev_read_addr() When you enable CONFIG_OF_LIVE, you will end up with a lot of conversions. To generate this commit, I used coccinelle excluding drivers/core/, include/dm/, and test/ The semantic patch that makes this change is as follows: <smpl> @@ expression dev; @@ -devfdt_get_addr(dev) +dev_read_addr(dev) </smpl> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> |
#
7208396b |
|
24-Jul-2020 |
Tom Rini <trini@konsulko.com> |
Revert "Merge tag 'dm-pull-20jul20' of git://git.denx.de/u-boot-dm" This reverts commit 5d3a21df6694ebd66d5c34c9d62a26edc7456fc7, reversing changes made to 56d37f1c564107e27d873181d838571b7d7860e7. Unfortunately this is causing CI failures: https://travis-ci.org/github/trini/u-boot/jobs/711313649 Signed-off-by: Tom Rini <trini@konsulko.com> |
#
60e7fa8b |
|
16-Jul-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert devfdt_get_addr() to dev_read_addr() When you enable CONFIG_OF_LIVE, you will end up with a lot of conversions. To generate this commit, I used coccinelle excluding drivers/core/, include/dm/, and test/ The semantic patch that makes this change is as follows: <smpl> @@ expression dev; @@ -devfdt_get_addr(dev) +dev_read_addr(dev) </smpl> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> |
#
cd93d625 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/bitops.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org> |
#
d26b4045 |
|
01-Oct-2019 |
Sagar Shrikant Kadam <sagar.kadam@sifive.com> |
gpio: sifive: add support for DM based gpio driver for FU540-SoC This patch adds a DM based driver model for gpio controller present in FU540-C000 SoC on HiFive Unleashed A00 board. This SoC has one GPIO bank and 16 GPIO lines in total, out of which GPIO0 to GPIO9 and GPIO15 are routed to the J1 header on the board. This implementation is ported from linux based gpio driver submitted for review by Wesley W. Terpstra <wesley@sifive.com> and/or Atish Patra <atish.patra@wdc.com> (many thanks !!). The linux driver can be referred here [1] [1]: https://lkml.org/lkml/2018/10/9/1103 Signed-off-by: Sagar Shrikant Kadam <sagar.kadam@sifive.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> |
#
d678a59d |
|
18-May-2024 |
Tom Rini <trini@konsulko.com> |
Revert "Merge patch series "arm: dts: am62-beagleplay: Fix Beagleplay Ethernet"" When bringing in the series 'arm: dts: am62-beagleplay: Fix Beagleplay Ethernet"' I failed to notice that b4 noticed it was based on next and so took that as the base commit and merged that part of next to master. This reverts commit c8ffd1356d42223cbb8c86280a083cc3c93e6426, reversing changes made to 2ee6f3a5f7550de3599faef9704e166e5dcace35. Reported-by: Jonas Karlman <jonas@kwiboo.se> Signed-off-by: Tom Rini <trini@konsulko.com> |
#
6657851f |
|
01-May-2024 |
Tom Rini <trini@konsulko.com> |
gpio: Remove <common.h> and add needed includes Remove <common.h> from this driver directory and when needed add missing include files directly. Reviewed-by: Heiko Schocher <hs@denx.de> Reviewed-by: Peter Robinson <pbrobinson@gmail.com> Signed-off-by: Tom Rini <trini@konsulko.com> |
#
d710c7e8 |
|
11-Sep-2021 |
Bin Meng <bmeng.cn@gmail.com> |
gpio: sifive: Fix -Wint-to-pointer-cast warning dev_read_addr() returns a value of type fdt_addr_t which is a 64-bit address and plat->base is a pointer. In a 32-bit build, this causes the following warning seen when building sifive-gpio.c: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] Change to use dev_read_addr_ptr(). Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com> |
#
8a8d24bd |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename ..._platdata variables to just ..._plat Try to maintain some consistency between these variables by using _plat as a suffix for them. Signed-off-by: Simon Glass <sjg@chromium.org> |
#
d1998a9f |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename ofdata_to_platdata() to of_to_plat() This name is far too long. Rename it to remove the 'data' bits. This makes it consistent with the platdata->plat rename. Signed-off-by: Simon Glass <sjg@chromium.org> |
#
c69cda25 |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename dev_get_platdata() to dev_get_plat() Rename this to be consistent with the change from 'platdata'. Signed-off-by: Simon Glass <sjg@chromium.org> |
#
caa4daa2 |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename 'platdata' variables to just 'plat' We use 'priv' for private data but often use 'platdata' for platform data. We can't really use 'pdata' since that is ambiguous (it could mean private or platform data). Rename some of the latter variables to end with 'plat' for consistency. Signed-off-by: Simon Glass <sjg@chromium.org> |
#
41575d8e |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename auto_alloc_size members to be shorter This construct is quite long-winded. In earlier days it made some sense since auto-allocation was a strange concept. But with driver model now used pretty universally, we can shorten this to 'auto'. This reduces verbosity and makes it easier to read. Coincidentally it also ensures that every declaration is on one line, thus making dtoc's job easier. Signed-off-by: Simon Glass <sjg@chromium.org> |
#
2548493a |
|
16-Jul-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert devfdt_get_addr() to dev_read_addr() When you enable CONFIG_OF_LIVE, you will end up with a lot of conversions. To generate this commit, I used coccinelle excluding drivers/core/, include/dm/, and test/ The semantic patch that makes this change is as follows: <smpl> @@ expression dev; @@ -devfdt_get_addr(dev) +dev_read_addr(dev) </smpl> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> |
#
7208396b |
|
24-Jul-2020 |
Tom Rini <trini@konsulko.com> |
Revert "Merge tag 'dm-pull-20jul20' of git://git.denx.de/u-boot-dm" This reverts commit 5d3a21df6694ebd66d5c34c9d62a26edc7456fc7, reversing changes made to 56d37f1c564107e27d873181d838571b7d7860e7. Unfortunately this is causing CI failures: https://travis-ci.org/github/trini/u-boot/jobs/711313649 Signed-off-by: Tom Rini <trini@konsulko.com> |
#
60e7fa8b |
|
16-Jul-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert devfdt_get_addr() to dev_read_addr() When you enable CONFIG_OF_LIVE, you will end up with a lot of conversions. To generate this commit, I used coccinelle excluding drivers/core/, include/dm/, and test/ The semantic patch that makes this change is as follows: <smpl> @@ expression dev; @@ -devfdt_get_addr(dev) +dev_read_addr(dev) </smpl> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> |
#
cd93d625 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/bitops.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org> |
#
d26b4045 |
|
01-Oct-2019 |
Sagar Shrikant Kadam <sagar.kadam@sifive.com> |
gpio: sifive: add support for DM based gpio driver for FU540-SoC This patch adds a DM based driver model for gpio controller present in FU540-C000 SoC on HiFive Unleashed A00 board. This SoC has one GPIO bank and 16 GPIO lines in total, out of which GPIO0 to GPIO9 and GPIO15 are routed to the J1 header on the board. This implementation is ported from linux based gpio driver submitted for review by Wesley W. Terpstra <wesley@sifive.com> and/or Atish Patra <atish.patra@wdc.com> (many thanks !!). The linux driver can be referred here [1] [1]: https://lkml.org/lkml/2018/10/9/1103 Signed-off-by: Sagar Shrikant Kadam <sagar.kadam@sifive.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> |
#
6657851f |
|
01-May-2024 |
Tom Rini <trini@konsulko.com> |
gpio: Remove <common.h> and add needed includes Remove <common.h> from this driver directory and when needed add missing include files directly. Reviewed-by: Heiko Schocher <hs@denx.de> Reviewed-by: Peter Robinson <pbrobinson@gmail.com> Signed-off-by: Tom Rini <trini@konsulko.com> |
#
d710c7e8 |
|
11-Sep-2021 |
Bin Meng <bmeng.cn@gmail.com> |
gpio: sifive: Fix -Wint-to-pointer-cast warning dev_read_addr() returns a value of type fdt_addr_t which is a 64-bit address and plat->base is a pointer. In a 32-bit build, this causes the following warning seen when building sifive-gpio.c: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] Change to use dev_read_addr_ptr(). Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com> |
#
8a8d24bd |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename ..._platdata variables to just ..._plat Try to maintain some consistency between these variables by using _plat as a suffix for them. Signed-off-by: Simon Glass <sjg@chromium.org> |
#
d1998a9f |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename ofdata_to_platdata() to of_to_plat() This name is far too long. Rename it to remove the 'data' bits. This makes it consistent with the platdata->plat rename. Signed-off-by: Simon Glass <sjg@chromium.org> |
#
c69cda25 |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename dev_get_platdata() to dev_get_plat() Rename this to be consistent with the change from 'platdata'. Signed-off-by: Simon Glass <sjg@chromium.org> |
#
caa4daa2 |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename 'platdata' variables to just 'plat' We use 'priv' for private data but often use 'platdata' for platform data. We can't really use 'pdata' since that is ambiguous (it could mean private or platform data). Rename some of the latter variables to end with 'plat' for consistency. Signed-off-by: Simon Glass <sjg@chromium.org> |
#
41575d8e |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename auto_alloc_size members to be shorter This construct is quite long-winded. In earlier days it made some sense since auto-allocation was a strange concept. But with driver model now used pretty universally, we can shorten this to 'auto'. This reduces verbosity and makes it easier to read. Coincidentally it also ensures that every declaration is on one line, thus making dtoc's job easier. Signed-off-by: Simon Glass <sjg@chromium.org> |
#
2548493a |
|
16-Jul-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert devfdt_get_addr() to dev_read_addr() When you enable CONFIG_OF_LIVE, you will end up with a lot of conversions. To generate this commit, I used coccinelle excluding drivers/core/, include/dm/, and test/ The semantic patch that makes this change is as follows: <smpl> @@ expression dev; @@ -devfdt_get_addr(dev) +dev_read_addr(dev) </smpl> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> |
#
7208396b |
|
24-Jul-2020 |
Tom Rini <trini@konsulko.com> |
Revert "Merge tag 'dm-pull-20jul20' of git://git.denx.de/u-boot-dm" This reverts commit 5d3a21df6694ebd66d5c34c9d62a26edc7456fc7, reversing changes made to 56d37f1c564107e27d873181d838571b7d7860e7. Unfortunately this is causing CI failures: https://travis-ci.org/github/trini/u-boot/jobs/711313649 Signed-off-by: Tom Rini <trini@konsulko.com> |
#
60e7fa8b |
|
16-Jul-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert devfdt_get_addr() to dev_read_addr() When you enable CONFIG_OF_LIVE, you will end up with a lot of conversions. To generate this commit, I used coccinelle excluding drivers/core/, include/dm/, and test/ The semantic patch that makes this change is as follows: <smpl> @@ expression dev; @@ -devfdt_get_addr(dev) +dev_read_addr(dev) </smpl> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> |
#
cd93d625 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/bitops.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org> |
#
d26b4045 |
|
01-Oct-2019 |
Sagar Shrikant Kadam <sagar.kadam@sifive.com> |
gpio: sifive: add support for DM based gpio driver for FU540-SoC This patch adds a DM based driver model for gpio controller present in FU540-C000 SoC on HiFive Unleashed A00 board. This SoC has one GPIO bank and 16 GPIO lines in total, out of which GPIO0 to GPIO9 and GPIO15 are routed to the J1 header on the board. This implementation is ported from linux based gpio driver submitted for review by Wesley W. Terpstra <wesley@sifive.com> and/or Atish Patra <atish.patra@wdc.com> (many thanks !!). The linux driver can be referred here [1] [1]: https://lkml.org/lkml/2018/10/9/1103 Signed-off-by: Sagar Shrikant Kadam <sagar.kadam@sifive.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> |
#
d710c7e8 |
|
11-Sep-2021 |
Bin Meng <bmeng.cn@gmail.com> |
gpio: sifive: Fix -Wint-to-pointer-cast warning dev_read_addr() returns a value of type fdt_addr_t which is a 64-bit address and plat->base is a pointer. In a 32-bit build, this causes the following warning seen when building sifive-gpio.c: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] Change to use dev_read_addr_ptr(). Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com> |
#
8a8d24bd |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename ..._platdata variables to just ..._plat Try to maintain some consistency between these variables by using _plat as a suffix for them. Signed-off-by: Simon Glass <sjg@chromium.org> |
#
d1998a9f |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename ofdata_to_platdata() to of_to_plat() This name is far too long. Rename it to remove the 'data' bits. This makes it consistent with the platdata->plat rename. Signed-off-by: Simon Glass <sjg@chromium.org> |
#
c69cda25 |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename dev_get_platdata() to dev_get_plat() Rename this to be consistent with the change from 'platdata'. Signed-off-by: Simon Glass <sjg@chromium.org> |
#
caa4daa2 |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename 'platdata' variables to just 'plat' We use 'priv' for private data but often use 'platdata' for platform data. We can't really use 'pdata' since that is ambiguous (it could mean private or platform data). Rename some of the latter variables to end with 'plat' for consistency. Signed-off-by: Simon Glass <sjg@chromium.org> |
#
41575d8e |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename auto_alloc_size members to be shorter This construct is quite long-winded. In earlier days it made some sense since auto-allocation was a strange concept. But with driver model now used pretty universally, we can shorten this to 'auto'. This reduces verbosity and makes it easier to read. Coincidentally it also ensures that every declaration is on one line, thus making dtoc's job easier. Signed-off-by: Simon Glass <sjg@chromium.org> |
#
2548493a |
|
16-Jul-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert devfdt_get_addr() to dev_read_addr() When you enable CONFIG_OF_LIVE, you will end up with a lot of conversions. To generate this commit, I used coccinelle excluding drivers/core/, include/dm/, and test/ The semantic patch that makes this change is as follows: <smpl> @@ expression dev; @@ -devfdt_get_addr(dev) +dev_read_addr(dev) </smpl> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> |
#
7208396b |
|
24-Jul-2020 |
Tom Rini <trini@konsulko.com> |
Revert "Merge tag 'dm-pull-20jul20' of git://git.denx.de/u-boot-dm" This reverts commit 5d3a21df6694ebd66d5c34c9d62a26edc7456fc7, reversing changes made to 56d37f1c564107e27d873181d838571b7d7860e7. Unfortunately this is causing CI failures: https://travis-ci.org/github/trini/u-boot/jobs/711313649 Signed-off-by: Tom Rini <trini@konsulko.com> |
#
60e7fa8b |
|
16-Jul-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert devfdt_get_addr() to dev_read_addr() When you enable CONFIG_OF_LIVE, you will end up with a lot of conversions. To generate this commit, I used coccinelle excluding drivers/core/, include/dm/, and test/ The semantic patch that makes this change is as follows: <smpl> @@ expression dev; @@ -devfdt_get_addr(dev) +dev_read_addr(dev) </smpl> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> |
#
cd93d625 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/bitops.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org> |
#
d26b4045 |
|
01-Oct-2019 |
Sagar Shrikant Kadam <sagar.kadam@sifive.com> |
gpio: sifive: add support for DM based gpio driver for FU540-SoC This patch adds a DM based driver model for gpio controller present in FU540-C000 SoC on HiFive Unleashed A00 board. This SoC has one GPIO bank and 16 GPIO lines in total, out of which GPIO0 to GPIO9 and GPIO15 are routed to the J1 header on the board. This implementation is ported from linux based gpio driver submitted for review by Wesley W. Terpstra <wesley@sifive.com> and/or Atish Patra <atish.patra@wdc.com> (many thanks !!). The linux driver can be referred here [1] [1]: https://lkml.org/lkml/2018/10/9/1103 Signed-off-by: Sagar Shrikant Kadam <sagar.kadam@sifive.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> |
#
8a8d24bd |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename ..._platdata variables to just ..._plat Try to maintain some consistency between these variables by using _plat as a suffix for them. Signed-off-by: Simon Glass <sjg@chromium.org> |
#
d1998a9f |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename ofdata_to_platdata() to of_to_plat() This name is far too long. Rename it to remove the 'data' bits. This makes it consistent with the platdata->plat rename. Signed-off-by: Simon Glass <sjg@chromium.org> |
#
c69cda25 |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename dev_get_platdata() to dev_get_plat() Rename this to be consistent with the change from 'platdata'. Signed-off-by: Simon Glass <sjg@chromium.org> |
#
caa4daa2 |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename 'platdata' variables to just 'plat' We use 'priv' for private data but often use 'platdata' for platform data. We can't really use 'pdata' since that is ambiguous (it could mean private or platform data). Rename some of the latter variables to end with 'plat' for consistency. Signed-off-by: Simon Glass <sjg@chromium.org> |
#
41575d8e |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename auto_alloc_size members to be shorter This construct is quite long-winded. In earlier days it made some sense since auto-allocation was a strange concept. But with driver model now used pretty universally, we can shorten this to 'auto'. This reduces verbosity and makes it easier to read. Coincidentally it also ensures that every declaration is on one line, thus making dtoc's job easier. Signed-off-by: Simon Glass <sjg@chromium.org> |
#
2548493a |
|
16-Jul-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert devfdt_get_addr() to dev_read_addr() When you enable CONFIG_OF_LIVE, you will end up with a lot of conversions. To generate this commit, I used coccinelle excluding drivers/core/, include/dm/, and test/ The semantic patch that makes this change is as follows: <smpl> @@ expression dev; @@ -devfdt_get_addr(dev) +dev_read_addr(dev) </smpl> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> |
#
7208396b |
|
24-Jul-2020 |
Tom Rini <trini@konsulko.com> |
Revert "Merge tag 'dm-pull-20jul20' of git://git.denx.de/u-boot-dm" This reverts commit 5d3a21df6694ebd66d5c34c9d62a26edc7456fc7, reversing changes made to 56d37f1c564107e27d873181d838571b7d7860e7. Unfortunately this is causing CI failures: https://travis-ci.org/github/trini/u-boot/jobs/711313649 Signed-off-by: Tom Rini <trini@konsulko.com> |
#
60e7fa8b |
|
16-Jul-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert devfdt_get_addr() to dev_read_addr() When you enable CONFIG_OF_LIVE, you will end up with a lot of conversions. To generate this commit, I used coccinelle excluding drivers/core/, include/dm/, and test/ The semantic patch that makes this change is as follows: <smpl> @@ expression dev; @@ -devfdt_get_addr(dev) +dev_read_addr(dev) </smpl> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> |
#
cd93d625 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/bitops.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org> |
#
d26b4045 |
|
01-Oct-2019 |
Sagar Shrikant Kadam <sagar.kadam@sifive.com> |
gpio: sifive: add support for DM based gpio driver for FU540-SoC This patch adds a DM based driver model for gpio controller present in FU540-C000 SoC on HiFive Unleashed A00 board. This SoC has one GPIO bank and 16 GPIO lines in total, out of which GPIO0 to GPIO9 and GPIO15 are routed to the J1 header on the board. This implementation is ported from linux based gpio driver submitted for review by Wesley W. Terpstra <wesley@sifive.com> and/or Atish Patra <atish.patra@wdc.com> (many thanks !!). The linux driver can be referred here [1] [1]: https://lkml.org/lkml/2018/10/9/1103 Signed-off-by: Sagar Shrikant Kadam <sagar.kadam@sifive.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> |
#
2548493a |
|
16-Jul-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert devfdt_get_addr() to dev_read_addr() When you enable CONFIG_OF_LIVE, you will end up with a lot of conversions. To generate this commit, I used coccinelle excluding drivers/core/, include/dm/, and test/ The semantic patch that makes this change is as follows: <smpl> @@ expression dev; @@ -devfdt_get_addr(dev) +dev_read_addr(dev) </smpl> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> |
#
7208396b |
|
24-Jul-2020 |
Tom Rini <trini@konsulko.com> |
Revert "Merge tag 'dm-pull-20jul20' of git://git.denx.de/u-boot-dm" This reverts commit 5d3a21df6694ebd66d5c34c9d62a26edc7456fc7, reversing changes made to 56d37f1c564107e27d873181d838571b7d7860e7. Unfortunately this is causing CI failures: https://travis-ci.org/github/trini/u-boot/jobs/711313649 Signed-off-by: Tom Rini <trini@konsulko.com> |
#
60e7fa8b |
|
16-Jul-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert devfdt_get_addr() to dev_read_addr() When you enable CONFIG_OF_LIVE, you will end up with a lot of conversions. To generate this commit, I used coccinelle excluding drivers/core/, include/dm/, and test/ The semantic patch that makes this change is as follows: <smpl> @@ expression dev; @@ -devfdt_get_addr(dev) +dev_read_addr(dev) </smpl> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> |
#
cd93d625 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/bitops.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org> |
#
d26b4045 |
|
01-Oct-2019 |
Sagar Shrikant Kadam <sagar.kadam@sifive.com> |
gpio: sifive: add support for DM based gpio driver for FU540-SoC This patch adds a DM based driver model for gpio controller present in FU540-C000 SoC on HiFive Unleashed A00 board. This SoC has one GPIO bank and 16 GPIO lines in total, out of which GPIO0 to GPIO9 and GPIO15 are routed to the J1 header on the board. This implementation is ported from linux based gpio driver submitted for review by Wesley W. Terpstra <wesley@sifive.com> and/or Atish Patra <atish.patra@wdc.com> (many thanks !!). The linux driver can be referred here [1] [1]: https://lkml.org/lkml/2018/10/9/1103 Signed-off-by: Sagar Shrikant Kadam <sagar.kadam@sifive.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> |
#
7208396b |
|
24-Jul-2020 |
Tom Rini <trini@konsulko.com> |
Revert "Merge tag 'dm-pull-20jul20' of git://git.denx.de/u-boot-dm" This reverts commit 5d3a21df6694ebd66d5c34c9d62a26edc7456fc7, reversing changes made to 56d37f1c564107e27d873181d838571b7d7860e7. Unfortunately this is causing CI failures: https://travis-ci.org/github/trini/u-boot/jobs/711313649 Signed-off-by: Tom Rini <trini@konsulko.com> |
#
60e7fa8b |
|
16-Jul-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert devfdt_get_addr() to dev_read_addr() When you enable CONFIG_OF_LIVE, you will end up with a lot of conversions. To generate this commit, I used coccinelle excluding drivers/core/, include/dm/, and test/ The semantic patch that makes this change is as follows: <smpl> @@ expression dev; @@ -devfdt_get_addr(dev) +dev_read_addr(dev) </smpl> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> |
#
cd93d625 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/bitops.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org> |
#
d26b4045 |
|
01-Oct-2019 |
Sagar Shrikant Kadam <sagar.kadam@sifive.com> |
gpio: sifive: add support for DM based gpio driver for FU540-SoC This patch adds a DM based driver model for gpio controller present in FU540-C000 SoC on HiFive Unleashed A00 board. This SoC has one GPIO bank and 16 GPIO lines in total, out of which GPIO0 to GPIO9 and GPIO15 are routed to the J1 header on the board. This implementation is ported from linux based gpio driver submitted for review by Wesley W. Terpstra <wesley@sifive.com> and/or Atish Patra <atish.patra@wdc.com> (many thanks !!). The linux driver can be referred here [1] [1]: https://lkml.org/lkml/2018/10/9/1103 Signed-off-by: Sagar Shrikant Kadam <sagar.kadam@sifive.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> |
#
cd93d625 |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/bitops.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org> |
#
d26b4045 |
|
01-Oct-2019 |
Sagar Shrikant Kadam <sagar.kadam@sifive.com> |
gpio: sifive: add support for DM based gpio driver for FU540-SoC This patch adds a DM based driver model for gpio controller present in FU540-C000 SoC on HiFive Unleashed A00 board. This SoC has one GPIO bank and 16 GPIO lines in total, out of which GPIO0 to GPIO9 and GPIO15 are routed to the J1 header on the board. This implementation is ported from linux based gpio driver submitted for review by Wesley W. Terpstra <wesley@sifive.com> and/or Atish Patra <atish.patra@wdc.com> (many thanks !!). The linux driver can be referred here [1] [1]: https://lkml.org/lkml/2018/10/9/1103 Signed-off-by: Sagar Shrikant Kadam <sagar.kadam@sifive.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> |
#
d26b4045 |
|
01-Oct-2019 |
Sagar Shrikant Kadam <sagar.kadam@sifive.com> |
gpio: sifive: add support for DM based gpio driver for FU540-SoC This patch adds a DM based driver model for gpio controller present in FU540-C000 SoC on HiFive Unleashed A00 board. This SoC has one GPIO bank and 16 GPIO lines in total, out of which GPIO0 to GPIO9 and GPIO15 are routed to the J1 header on the board. This implementation is ported from linux based gpio driver submitted for review by Wesley W. Terpstra <wesley@sifive.com> and/or Atish Patra <atish.patra@wdc.com> (many thanks !!). The linux driver can be referred here [1] [1]: https://lkml.org/lkml/2018/10/9/1103 Signed-off-by: Sagar Shrikant Kadam <sagar.kadam@sifive.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> |