Revert "Merge patch series "arm: dts: am62-beagleplay: Fix Beagleplay Ethernet""

When bringing in the series 'arm: dts: am62-beagleplay: Fix Beagleplay
Ethernet"' I failed to notice that b4 noticed it was based on next and
so took that as the base commit and merged that part of next to master.

This reverts commit c8ffd1356d42223cbb8c86280a083cc3c93e6426, reversing
changes made to 2ee6f3a5f7550de3599faef9704e166e5dcace35.

Reported-by: Jonas Karlman <jonas@kwiboo.se>
Signed-off-by: Tom Rini <trini@konsulko.com>

firmware: Remove <common.h> and add needed includes

Remove <common.h> from this driver directory and when needed
add missing include files directly.

Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Signed-off-by: Tom Rini <trini@konsulko.com>

arm_ffa: fix: remove deadcode in ffa_print_error_log()

address the CID 464361 Control flow issues [1]

[1]: https://lore.kernel.org/all/20230821210927.GL3953269@bill-the-cat/

Signed-off-by: Abdellatif El Khlifi <abdellatif.elkhlifi@arm.com>
Cc: Tom Rini <trini@konsulko.com>

arm_ffa: use debug logs

replace info logs with debug logs

Signed-off-by: Abdellatif El Khlifi <abdellatif.elkhlifi@arm.com>
Cc: Tom Rini <trini@konsulko.com>
Cc: Simon Glass <sjg@chromium.org>
Reviewed-by: Simon Glass <sjg@chromium.org>

arm_ffa: introduce Arm FF-A support

Add Arm FF-A support implementing Arm Firmware Framework for Armv8-A v1.0

The Firmware Framework for Arm A-profile processors (FF-A v1.0) [1]
describes interfaces (ABIs) that standardize communication
between the Secure World and Normal World leveraging TrustZone
technology.

This driver uses 64-bit registers as per SMCCCv1.2 spec and comes
on top of the SMCCC layer. The driver provides the FF-A ABIs needed for
querying the FF-A framework from the secure world.

The driver uses SMC32 calling convention which means using the first
32-bit data of the Xn registers.

All supported ABIs come with their 32-bit version except FFA_RXTX_MAP
which has 64-bit version supported.

Both 32-bit and 64-bit direct messaging are supported which allows both
32-bit and 64-bit clients to use the FF-A bus.

FF-A is a discoverable bus and similar to architecture features.
FF-A bus is discovered using ARM_SMCCC_FEATURES mechanism performed
by the PSCI driver.

Clients are able to probe then use the FF-A bus by calling the DM class
searching APIs (e.g: uclass_first_device).

The Secure World is considered as one entity to communicate with
using the FF-A bus. FF-A communication is handled by one device and
one instance (the bus). This FF-A driver takes care of all the
interactions between Normal world and Secure World.

The driver exports its operations to be used by upper layers.

Exported operations:

- ffa_partition_info_get
- ffa_sync_send_receive
- ffa_rxtx_unmap

Generic FF-A methods are implemented in the Uclass (arm-ffa-uclass.c).
Arm specific methods are implemented in the Arm driver (arm-ffa.c).

For more details please refer to the driver documentation [2].

[1]: https://developer.arm.com/documentation/den0077/latest/
[2]: doc/arch/arm64.ffa.rst

Signed-off-by: Abdellatif El Khlifi <abdellatif.elkhlifi@arm.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Cc: Tom Rini <trini@konsulko.com>
Cc: Jens Wiklander <jens.wiklander@linaro.org>
Cc: Heinrich Schuchardt <xypron.glpk@gmx.de>

Revert "Merge branch '2023-07-24-introduce-FF-A-suppport'"

This reverts commit d927d1a80843e1c3e2a3f0b8f6150790bef83da1, reversing
changes made to c07ad9520c6190070513016fdb495d4703a4a853.

These changes do not pass CI currently.

Signed-off-by: Tom Rini <trini@konsulko.com>

arm_ffa: introduce Arm FF-A support

Add Arm FF-A support implementing Arm Firmware Framework for Armv8-A v1.0

The Firmware Framework for Arm A-profile processors (FF-A v1.0) [1]
describes interfaces (ABIs) that standardize communication
between the Secure World and Normal World leveraging TrustZone
technology.

This driver uses 64-bit registers as per SMCCCv1.2 spec and comes
on top of the SMCCC layer. The driver provides the FF-A ABIs needed for
querying the FF-A framework from the secure world.

The driver uses SMC32 calling convention which means using the first
32-bit data of the Xn registers.

All supported ABIs come with their 32-bit version except FFA_RXTX_MAP
which has 64-bit version supported.

Both 32-bit and 64-bit direct messaging are supported which allows both
32-bit and 64-bit clients to use the FF-A bus.

FF-A is a discoverable bus and similar to architecture features.
FF-A bus is discovered using ARM_SMCCC_FEATURES mechanism performed
by the PSCI driver.

Clients are able to probe then use the FF-A bus by calling the DM class
searching APIs (e.g: uclass_first_device).

The Secure World is considered as one entity to communicate with
using the FF-A bus. FF-A communication is handled by one device and
one instance (the bus). This FF-A driver takes care of all the
interactions between Normal world and Secure World.

The driver exports its operations to be used by upper layers.

Exported operations:

- ffa_partition_info_get
- ffa_sync_send_receive
- ffa_rxtx_unmap

Generic FF-A methods are implemented in the Uclass (arm-ffa-uclass.c).
Arm specific methods are implemented in the Arm driver (arm-ffa.c).

For more details please refer to the driver documentation [2].

[1]: https://developer.arm.com/documentation/den0077/latest/
[2]: doc/arch/arm64.ffa.rst

Signed-off-by: Abdellatif El Khlifi <abdellatif.elkhlifi@arm.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Cc: Tom Rini <trini@konsulko.com>
Cc: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Cc: Jens Wiklander <jens.wiklander@linaro.org>
Cc: Heinrich Schuchardt <xypron.glpk@gmx.de>

Revert "Merge patch series "arm: dts: am62-beagleplay: Fix Beagleplay Ethernet""

When bringing in the series 'arm: dts: am62-beagleplay: Fix Beagleplay
Ethernet"' I failed to notice that b4 noticed it was based on next and
so took that as the base commit and merged that part of next to master.

This reverts commit c8ffd1356d42223cbb8c86280a083cc3c93e6426, reversing
changes made to 2ee6f3a5f7550de3599faef9704e166e5dcace35.

Reported-by: Jonas Karlman <jonas@kwiboo.se>
Signed-off-by: Tom Rini <trini@konsulko.com>

firmware: Remove <common.h> and add needed includes

Remove <common.h> from this driver directory and when needed
add missing include files directly.

Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Signed-off-by: Tom Rini <trini@konsulko.com>

arm_ffa: fix: remove deadcode in ffa_print_error_log()

address the CID 464361 Control flow issues [1]

[1]: https://lore.kernel.org/all/20230821210927.GL3953269@bill-the-cat/

Signed-off-by: Abdellatif El Khlifi <abdellatif.elkhlifi@arm.com>
Cc: Tom Rini <trini@konsulko.com>

arm_ffa: use debug logs

replace info logs with debug logs

Signed-off-by: Abdellatif El Khlifi <abdellatif.elkhlifi@arm.com>
Cc: Tom Rini <trini@konsulko.com>
Cc: Simon Glass <sjg@chromium.org>
Reviewed-by: Simon Glass <sjg@chromium.org>

arm_ffa: introduce Arm FF-A support

Add Arm FF-A support implementing Arm Firmware Framework for Armv8-A v1.0

The Firmware Framework for Arm A-profile processors (FF-A v1.0) [1]
describes interfaces (ABIs) that standardize communication
between the Secure World and Normal World leveraging TrustZone
technology.

This driver uses 64-bit registers as per SMCCCv1.2 spec and comes
on top of the SMCCC layer. The driver provides the FF-A ABIs needed for
querying the FF-A framework from the secure world.

The driver uses SMC32 calling convention which means using the first
32-bit data of the Xn registers.

All supported ABIs come with their 32-bit version except FFA_RXTX_MAP
which has 64-bit version supported.

Both 32-bit and 64-bit direct messaging are supported which allows both
32-bit and 64-bit clients to use the FF-A bus.

FF-A is a discoverable bus and similar to architecture features.
FF-A bus is discovered using ARM_SMCCC_FEATURES mechanism performed
by the PSCI driver.

Clients are able to probe then use the FF-A bus by calling the DM class
searching APIs (e.g: uclass_first_device).

The Secure World is considered as one entity to communicate with
using the FF-A bus. FF-A communication is handled by one device and
one instance (the bus). This FF-A driver takes care of all the
interactions between Normal world and Secure World.

The driver exports its operations to be used by upper layers.

Exported operations:

- ffa_partition_info_get
- ffa_sync_send_receive
- ffa_rxtx_unmap

Generic FF-A methods are implemented in the Uclass (arm-ffa-uclass.c).
Arm specific methods are implemented in the Arm driver (arm-ffa.c).

For more details please refer to the driver documentation [2].

[1]: https://developer.arm.com/documentation/den0077/latest/
[2]: doc/arch/arm64.ffa.rst

Signed-off-by: Abdellatif El Khlifi <abdellatif.elkhlifi@arm.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Cc: Tom Rini <trini@konsulko.com>
Cc: Jens Wiklander <jens.wiklander@linaro.org>
Cc: Heinrich Schuchardt <xypron.glpk@gmx.de>

Revert "Merge branch '2023-07-24-introduce-FF-A-suppport'"

This reverts commit d927d1a80843e1c3e2a3f0b8f6150790bef83da1, reversing
changes made to c07ad9520c6190070513016fdb495d4703a4a853.

These changes do not pass CI currently.

Signed-off-by: Tom Rini <trini@konsulko.com>

arm_ffa: introduce Arm FF-A support

Add Arm FF-A support implementing Arm Firmware Framework for Armv8-A v1.0

The Firmware Framework for Arm A-profile processors (FF-A v1.0) [1]
describes interfaces (ABIs) that standardize communication
between the Secure World and Normal World leveraging TrustZone
technology.

This driver uses 64-bit registers as per SMCCCv1.2 spec and comes
on top of the SMCCC layer. The driver provides the FF-A ABIs needed for
querying the FF-A framework from the secure world.

The driver uses SMC32 calling convention which means using the first
32-bit data of the Xn registers.

All supported ABIs come with their 32-bit version except FFA_RXTX_MAP
which has 64-bit version supported.

Both 32-bit and 64-bit direct messaging are supported which allows both
32-bit and 64-bit clients to use the FF-A bus.

FF-A is a discoverable bus and similar to architecture features.
FF-A bus is discovered using ARM_SMCCC_FEATURES mechanism performed
by the PSCI driver.

Clients are able to probe then use the FF-A bus by calling the DM class
searching APIs (e.g: uclass_first_device).

The Secure World is considered as one entity to communicate with
using the FF-A bus. FF-A communication is handled by one device and
one instance (the bus). This FF-A driver takes care of all the
interactions between Normal world and Secure World.

The driver exports its operations to be used by upper layers.

Exported operations:

- ffa_partition_info_get
- ffa_sync_send_receive
- ffa_rxtx_unmap

Generic FF-A methods are implemented in the Uclass (arm-ffa-uclass.c).
Arm specific methods are implemented in the Arm driver (arm-ffa.c).

For more details please refer to the driver documentation [2].

[1]: https://developer.arm.com/documentation/den0077/latest/
[2]: doc/arch/arm64.ffa.rst

Signed-off-by: Abdellatif El Khlifi <abdellatif.elkhlifi@arm.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Cc: Tom Rini <trini@konsulko.com>
Cc: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Cc: Jens Wiklander <jens.wiklander@linaro.org>
Cc: Heinrich Schuchardt <xypron.glpk@gmx.de>

firmware: Remove <common.h> and add needed includes

Remove <common.h> from this driver directory and when needed
add missing include files directly.

Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Signed-off-by: Tom Rini <trini@konsulko.com>

arm_ffa: fix: remove deadcode in ffa_print_error_log()

address the CID 464361 Control flow issues [1]

[1]: https://lore.kernel.org/all/20230821210927.GL3953269@bill-the-cat/

Signed-off-by: Abdellatif El Khlifi <abdellatif.elkhlifi@arm.com>
Cc: Tom Rini <trini@konsulko.com>

arm_ffa: use debug logs

replace info logs with debug logs

Signed-off-by: Abdellatif El Khlifi <abdellatif.elkhlifi@arm.com>
Cc: Tom Rini <trini@konsulko.com>
Cc: Simon Glass <sjg@chromium.org>
Reviewed-by: Simon Glass <sjg@chromium.org>

arm_ffa: introduce Arm FF-A support

Add Arm FF-A support implementing Arm Firmware Framework for Armv8-A v1.0

The Firmware Framework for Arm A-profile processors (FF-A v1.0) [1]
describes interfaces (ABIs) that standardize communication
between the Secure World and Normal World leveraging TrustZone
technology.

This driver uses 64-bit registers as per SMCCCv1.2 spec and comes
on top of the SMCCC layer. The driver provides the FF-A ABIs needed for
querying the FF-A framework from the secure world.

The driver uses SMC32 calling convention which means using the first
32-bit data of the Xn registers.

All supported ABIs come with their 32-bit version except FFA_RXTX_MAP
which has 64-bit version supported.

Both 32-bit and 64-bit direct messaging are supported which allows both
32-bit and 64-bit clients to use the FF-A bus.

FF-A is a discoverable bus and similar to architecture features.
FF-A bus is discovered using ARM_SMCCC_FEATURES mechanism performed
by the PSCI driver.

Clients are able to probe then use the FF-A bus by calling the DM class
searching APIs (e.g: uclass_first_device).

The Secure World is considered as one entity to communicate with
using the FF-A bus. FF-A communication is handled by one device and
one instance (the bus). This FF-A driver takes care of all the
interactions between Normal world and Secure World.

The driver exports its operations to be used by upper layers.

Exported operations:

- ffa_partition_info_get
- ffa_sync_send_receive
- ffa_rxtx_unmap

Generic FF-A methods are implemented in the Uclass (arm-ffa-uclass.c).
Arm specific methods are implemented in the Arm driver (arm-ffa.c).

For more details please refer to the driver documentation [2].

[1]: https://developer.arm.com/documentation/den0077/latest/
[2]: doc/arch/arm64.ffa.rst

Signed-off-by: Abdellatif El Khlifi <abdellatif.elkhlifi@arm.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Cc: Tom Rini <trini@konsulko.com>
Cc: Jens Wiklander <jens.wiklander@linaro.org>
Cc: Heinrich Schuchardt <xypron.glpk@gmx.de>

Revert "Merge branch '2023-07-24-introduce-FF-A-suppport'"

This reverts commit d927d1a80843e1c3e2a3f0b8f6150790bef83da1, reversing
changes made to c07ad9520c6190070513016fdb495d4703a4a853.

These changes do not pass CI currently.

Signed-off-by: Tom Rini <trini@konsulko.com>

arm_ffa: introduce Arm FF-A support

Add Arm FF-A support implementing Arm Firmware Framework for Armv8-A v1.0

The Firmware Framework for Arm A-profile processors (FF-A v1.0) [1]
describes interfaces (ABIs) that standardize communication
between the Secure World and Normal World leveraging TrustZone
technology.

This driver uses 64-bit registers as per SMCCCv1.2 spec and comes
on top of the SMCCC layer. The driver provides the FF-A ABIs needed for
querying the FF-A framework from the secure world.

The driver uses SMC32 calling convention which means using the first
32-bit data of the Xn registers.

All supported ABIs come with their 32-bit version except FFA_RXTX_MAP
which has 64-bit version supported.

Both 32-bit and 64-bit direct messaging are supported which allows both
32-bit and 64-bit clients to use the FF-A bus.

FF-A is a discoverable bus and similar to architecture features.
FF-A bus is discovered using ARM_SMCCC_FEATURES mechanism performed
by the PSCI driver.

Clients are able to probe then use the FF-A bus by calling the DM class
searching APIs (e.g: uclass_first_device).

The Secure World is considered as one entity to communicate with
using the FF-A bus. FF-A communication is handled by one device and
one instance (the bus). This FF-A driver takes care of all the
interactions between Normal world and Secure World.

The driver exports its operations to be used by upper layers.

Exported operations:

- ffa_partition_info_get
- ffa_sync_send_receive
- ffa_rxtx_unmap

Generic FF-A methods are implemented in the Uclass (arm-ffa-uclass.c).
Arm specific methods are implemented in the Arm driver (arm-ffa.c).

For more details please refer to the driver documentation [2].

[1]: https://developer.arm.com/documentation/den0077/latest/
[2]: doc/arch/arm64.ffa.rst

Signed-off-by: Abdellatif El Khlifi <abdellatif.elkhlifi@arm.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Cc: Tom Rini <trini@konsulko.com>
Cc: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Cc: Jens Wiklander <jens.wiklander@linaro.org>
Cc: Heinrich Schuchardt <xypron.glpk@gmx.de>

firmware: Remove <common.h> and add needed includes

Remove <common.h> from this driver directory and when needed
add missing include files directly.

Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Signed-off-by: Tom Rini <trini@konsulko.com>

arm_ffa: fix: remove deadcode in ffa_print_error_log()

address the CID 464361 Control flow issues [1]

[1]: https://lore.kernel.org/all/20230821210927.GL3953269@bill-the-cat/

Signed-off-by: Abdellatif El Khlifi <abdellatif.elkhlifi@arm.com>
Cc: Tom Rini <trini@konsulko.com>

arm_ffa: use debug logs

replace info logs with debug logs

Signed-off-by: Abdellatif El Khlifi <abdellatif.elkhlifi@arm.com>
Cc: Tom Rini <trini@konsulko.com>
Cc: Simon Glass <sjg@chromium.org>
Reviewed-by: Simon Glass <sjg@chromium.org>

arm_ffa: introduce Arm FF-A support

Add Arm FF-A support implementing Arm Firmware Framework for Armv8-A v1.0

The Firmware Framework for Arm A-profile processors (FF-A v1.0) [1]
describes interfaces (ABIs) that standardize communication
between the Secure World and Normal World leveraging TrustZone
technology.

This driver uses 64-bit registers as per SMCCCv1.2 spec and comes
on top of the SMCCC layer. The driver provides the FF-A ABIs needed for
querying the FF-A framework from the secure world.

The driver uses SMC32 calling convention which means using the first
32-bit data of the Xn registers.

All supported ABIs come with their 32-bit version except FFA_RXTX_MAP
which has 64-bit version supported.

Both 32-bit and 64-bit direct messaging are supported which allows both
32-bit and 64-bit clients to use the FF-A bus.

FF-A is a discoverable bus and similar to architecture features.
FF-A bus is discovered using ARM_SMCCC_FEATURES mechanism performed
by the PSCI driver.

Clients are able to probe then use the FF-A bus by calling the DM class
searching APIs (e.g: uclass_first_device).

The Secure World is considered as one entity to communicate with
using the FF-A bus. FF-A communication is handled by one device and
one instance (the bus). This FF-A driver takes care of all the
interactions between Normal world and Secure World.

The driver exports its operations to be used by upper layers.

Exported operations:

- ffa_partition_info_get
- ffa_sync_send_receive
- ffa_rxtx_unmap

Generic FF-A methods are implemented in the Uclass (arm-ffa-uclass.c).
Arm specific methods are implemented in the Arm driver (arm-ffa.c).

For more details please refer to the driver documentation [2].

[1]: https://developer.arm.com/documentation/den0077/latest/
[2]: doc/arch/arm64.ffa.rst

Signed-off-by: Abdellatif El Khlifi <abdellatif.elkhlifi@arm.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Cc: Tom Rini <trini@konsulko.com>
Cc: Jens Wiklander <jens.wiklander@linaro.org>
Cc: Heinrich Schuchardt <xypron.glpk@gmx.de>

Revert "Merge branch '2023-07-24-introduce-FF-A-suppport'"

This reverts commit d927d1a80843e1c3e2a3f0b8f6150790bef83da1, reversing
changes made to c07ad9520c6190070513016fdb495d4703a4a853.

These changes do not pass CI currently.

Signed-off-by: Tom Rini <trini@konsulko.com>

arm_ffa: introduce Arm FF-A support

Add Arm FF-A support implementing Arm Firmware Framework for Armv8-A v1.0

The Firmware Framework for Arm A-profile processors (FF-A v1.0) [1]
describes interfaces (ABIs) that standardize communication
between the Secure World and Normal World leveraging TrustZone
technology.

This driver uses 64-bit registers as per SMCCCv1.2 spec and comes
on top of the SMCCC layer. The driver provides the FF-A ABIs needed for
querying the FF-A framework from the secure world.

The driver uses SMC32 calling convention which means using the first
32-bit data of the Xn registers.

All supported ABIs come with their 32-bit version except FFA_RXTX_MAP
which has 64-bit version supported.

Both 32-bit and 64-bit direct messaging are supported which allows both
32-bit and 64-bit clients to use the FF-A bus.

FF-A is a discoverable bus and similar to architecture features.
FF-A bus is discovered using ARM_SMCCC_FEATURES mechanism performed
by the PSCI driver.

Clients are able to probe then use the FF-A bus by calling the DM class
searching APIs (e.g: uclass_first_device).

The Secure World is considered as one entity to communicate with
using the FF-A bus. FF-A communication is handled by one device and
one instance (the bus). This FF-A driver takes care of all the
interactions between Normal world and Secure World.

The driver exports its operations to be used by upper layers.

Exported operations:

- ffa_partition_info_get
- ffa_sync_send_receive
- ffa_rxtx_unmap

Generic FF-A methods are implemented in the Uclass (arm-ffa-uclass.c).
Arm specific methods are implemented in the Arm driver (arm-ffa.c).

For more details please refer to the driver documentation [2].

[1]: https://developer.arm.com/documentation/den0077/latest/
[2]: doc/arch/arm64.ffa.rst

Signed-off-by: Abdellatif El Khlifi <abdellatif.elkhlifi@arm.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Cc: Tom Rini <trini@konsulko.com>
Cc: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Cc: Jens Wiklander <jens.wiklander@linaro.org>
Cc: Heinrich Schuchardt <xypron.glpk@gmx.de>

firmware: Remove <common.h> and add needed includes

Remove <common.h> from this driver directory and when needed
add missing include files directly.

Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Signed-off-by: Tom Rini <trini@konsulko.com>

arm_ffa: fix: remove deadcode in ffa_print_error_log()

address the CID 464361 Control flow issues [1]

[1]: https://lore.kernel.org/all/20230821210927.GL3953269@bill-the-cat/

Signed-off-by: Abdellatif El Khlifi <abdellatif.elkhlifi@arm.com>
Cc: Tom Rini <trini@konsulko.com>

arm_ffa: use debug logs

replace info logs with debug logs

Signed-off-by: Abdellatif El Khlifi <abdellatif.elkhlifi@arm.com>
Cc: Tom Rini <trini@konsulko.com>
Cc: Simon Glass <sjg@chromium.org>
Reviewed-by: Simon Glass <sjg@chromium.org>

arm_ffa: introduce Arm FF-A support

Add Arm FF-A support implementing Arm Firmware Framework for Armv8-A v1.0

The Firmware Framework for Arm A-profile processors (FF-A v1.0) [1]
describes interfaces (ABIs) that standardize communication
between the Secure World and Normal World leveraging TrustZone
technology.

This driver uses 64-bit registers as per SMCCCv1.2 spec and comes
on top of the SMCCC layer. The driver provides the FF-A ABIs needed for
querying the FF-A framework from the secure world.

The driver uses SMC32 calling convention which means using the first
32-bit data of the Xn registers.

All supported ABIs come with their 32-bit version except FFA_RXTX_MAP
which has 64-bit version supported.

Both 32-bit and 64-bit direct messaging are supported which allows both
32-bit and 64-bit clients to use the FF-A bus.

FF-A is a discoverable bus and similar to architecture features.
FF-A bus is discovered using ARM_SMCCC_FEATURES mechanism performed
by the PSCI driver.

Clients are able to probe then use the FF-A bus by calling the DM class
searching APIs (e.g: uclass_first_device).

The Secure World is considered as one entity to communicate with
using the FF-A bus. FF-A communication is handled by one device and
one instance (the bus). This FF-A driver takes care of all the
interactions between Normal world and Secure World.

The driver exports its operations to be used by upper layers.

Exported operations:

- ffa_partition_info_get
- ffa_sync_send_receive
- ffa_rxtx_unmap

Generic FF-A methods are implemented in the Uclass (arm-ffa-uclass.c).
Arm specific methods are implemented in the Arm driver (arm-ffa.c).

For more details please refer to the driver documentation [2].

[1]: https://developer.arm.com/documentation/den0077/latest/
[2]: doc/arch/arm64.ffa.rst

Signed-off-by: Abdellatif El Khlifi <abdellatif.elkhlifi@arm.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Cc: Tom Rini <trini@konsulko.com>
Cc: Jens Wiklander <jens.wiklander@linaro.org>
Cc: Heinrich Schuchardt <xypron.glpk@gmx.de>

Revert "Merge branch '2023-07-24-introduce-FF-A-suppport'"

This reverts commit d927d1a80843e1c3e2a3f0b8f6150790bef83da1, reversing
changes made to c07ad9520c6190070513016fdb495d4703a4a853.

These changes do not pass CI currently.

Signed-off-by: Tom Rini <trini@konsulko.com>

arm_ffa: introduce Arm FF-A support

Add Arm FF-A support implementing Arm Firmware Framework for Armv8-A v1.0

The Firmware Framework for Arm A-profile processors (FF-A v1.0) [1]
describes interfaces (ABIs) that standardize communication
between the Secure World and Normal World leveraging TrustZone
technology.

This driver uses 64-bit registers as per SMCCCv1.2 spec and comes
on top of the SMCCC layer. The driver provides the FF-A ABIs needed for
querying the FF-A framework from the secure world.

The driver uses SMC32 calling convention which means using the first
32-bit data of the Xn registers.

All supported ABIs come with their 32-bit version except FFA_RXTX_MAP
which has 64-bit version supported.

Both 32-bit and 64-bit direct messaging are supported which allows both
32-bit and 64-bit clients to use the FF-A bus.

FF-A is a discoverable bus and similar to architecture features.
FF-A bus is discovered using ARM_SMCCC_FEATURES mechanism performed
by the PSCI driver.

Clients are able to probe then use the FF-A bus by calling the DM class
searching APIs (e.g: uclass_first_device).

The Secure World is considered as one entity to communicate with
using the FF-A bus. FF-A communication is handled by one device and
one instance (the bus). This FF-A driver takes care of all the
interactions between Normal world and Secure World.

The driver exports its operations to be used by upper layers.

Exported operations:

- ffa_partition_info_get
- ffa_sync_send_receive
- ffa_rxtx_unmap

Generic FF-A methods are implemented in the Uclass (arm-ffa-uclass.c).
Arm specific methods are implemented in the Arm driver (arm-ffa.c).

For more details please refer to the driver documentation [2].

[1]: https://developer.arm.com/documentation/den0077/latest/
[2]: doc/arch/arm64.ffa.rst

Signed-off-by: Abdellatif El Khlifi <abdellatif.elkhlifi@arm.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Cc: Tom Rini <trini@konsulko.com>
Cc: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Cc: Jens Wiklander <jens.wiklander@linaro.org>
Cc: Heinrich Schuchardt <xypron.glpk@gmx.de>

firmware: Remove <common.h> and add needed includes

Remove <common.h> from this driver directory and when needed
add missing include files directly.

Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Signed-off-by: Tom Rini <trini@konsulko.com>

arm_ffa: fix: remove deadcode in ffa_print_error_log()

address the CID 464361 Control flow issues [1]

[1]: https://lore.kernel.org/all/20230821210927.GL3953269@bill-the-cat/

Signed-off-by: Abdellatif El Khlifi <abdellatif.elkhlifi@arm.com>
Cc: Tom Rini <trini@konsulko.com>

arm_ffa: use debug logs

replace info logs with debug logs

Signed-off-by: Abdellatif El Khlifi <abdellatif.elkhlifi@arm.com>
Cc: Tom Rini <trini@konsulko.com>
Cc: Simon Glass <sjg@chromium.org>
Reviewed-by: Simon Glass <sjg@chromium.org>

arm_ffa: introduce Arm FF-A support

Add Arm FF-A support implementing Arm Firmware Framework for Armv8-A v1.0

The Firmware Framework for Arm A-profile processors (FF-A v1.0) [1]
describes interfaces (ABIs) that standardize communication
between the Secure World and Normal World leveraging TrustZone
technology.

This driver uses 64-bit registers as per SMCCCv1.2 spec and comes
on top of the SMCCC layer. The driver provides the FF-A ABIs needed for
querying the FF-A framework from the secure world.

The driver uses SMC32 calling convention which means using the first
32-bit data of the Xn registers.

All supported ABIs come with their 32-bit version except FFA_RXTX_MAP
which has 64-bit version supported.

Both 32-bit and 64-bit direct messaging are supported which allows both
32-bit and 64-bit clients to use the FF-A bus.

FF-A is a discoverable bus and similar to architecture features.
FF-A bus is discovered using ARM_SMCCC_FEATURES mechanism performed
by the PSCI driver.

Clients are able to probe then use the FF-A bus by calling the DM class
searching APIs (e.g: uclass_first_device).

The Secure World is considered as one entity to communicate with
using the FF-A bus. FF-A communication is handled by one device and
one instance (the bus). This FF-A driver takes care of all the
interactions between Normal world and Secure World.

The driver exports its operations to be used by upper layers.

Exported operations:

- ffa_partition_info_get
- ffa_sync_send_receive
- ffa_rxtx_unmap

Generic FF-A methods are implemented in the Uclass (arm-ffa-uclass.c).
Arm specific methods are implemented in the Arm driver (arm-ffa.c).

For more details please refer to the driver documentation [2].

[1]: https://developer.arm.com/documentation/den0077/latest/
[2]: doc/arch/arm64.ffa.rst

Signed-off-by: Abdellatif El Khlifi <abdellatif.elkhlifi@arm.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Cc: Tom Rini <trini@konsulko.com>
Cc: Jens Wiklander <jens.wiklander@linaro.org>
Cc: Heinrich Schuchardt <xypron.glpk@gmx.de>

Revert "Merge branch '2023-07-24-introduce-FF-A-suppport'"

This reverts commit d927d1a80843e1c3e2a3f0b8f6150790bef83da1, reversing
changes made to c07ad9520c6190070513016fdb495d4703a4a853.

These changes do not pass CI currently.

Signed-off-by: Tom Rini <trini@konsulko.com>

arm_ffa: introduce Arm FF-A support

Add Arm FF-A support implementing Arm Firmware Framework for Armv8-A v1.0

The Firmware Framework for Arm A-profile processors (FF-A v1.0) [1]
describes interfaces (ABIs) that standardize communication
between the Secure World and Normal World leveraging TrustZone
technology.

This driver uses 64-bit registers as per SMCCCv1.2 spec and comes
on top of the SMCCC layer. The driver provides the FF-A ABIs needed for
querying the FF-A framework from the secure world.

The driver uses SMC32 calling convention which means using the first
32-bit data of the Xn registers.

All supported ABIs come with their 32-bit version except FFA_RXTX_MAP
which has 64-bit version supported.

Both 32-bit and 64-bit direct messaging are supported which allows both
32-bit and 64-bit clients to use the FF-A bus.

FF-A is a discoverable bus and similar to architecture features.
FF-A bus is discovered using ARM_SMCCC_FEATURES mechanism performed
by the PSCI driver.

Clients are able to probe then use the FF-A bus by calling the DM class
searching APIs (e.g: uclass_first_device).

The Secure World is considered as one entity to communicate with
using the FF-A bus. FF-A communication is handled by one device and
one instance (the bus). This FF-A driver takes care of all the
interactions between Normal world and Secure World.

The driver exports its operations to be used by upper layers.

Exported operations:

- ffa_partition_info_get
- ffa_sync_send_receive
- ffa_rxtx_unmap

Generic FF-A methods are implemented in the Uclass (arm-ffa-uclass.c).
Arm specific methods are implemented in the Arm driver (arm-ffa.c).

For more details please refer to the driver documentation [2].

[1]: https://developer.arm.com/documentation/den0077/latest/
[2]: doc/arch/arm64.ffa.rst

Signed-off-by: Abdellatif El Khlifi <abdellatif.elkhlifi@arm.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Cc: Tom Rini <trini@konsulko.com>
Cc: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Cc: Jens Wiklander <jens.wiklander@linaro.org>
Cc: Heinrich Schuchardt <xypron.glpk@gmx.de>

arm_ffa: fix: remove deadcode in ffa_print_error_log()

address the CID 464361 Control flow issues [1]

[1]: https://lore.kernel.org/all/20230821210927.GL3953269@bill-the-cat/

Signed-off-by: Abdellatif El Khlifi <abdellatif.elkhlifi@arm.com>
Cc: Tom Rini <trini@konsulko.com>

arm_ffa: use debug logs

replace info logs with debug logs

Signed-off-by: Abdellatif El Khlifi <abdellatif.elkhlifi@arm.com>
Cc: Tom Rini <trini@konsulko.com>
Cc: Simon Glass <sjg@chromium.org>
Reviewed-by: Simon Glass <sjg@chromium.org>

arm_ffa: introduce Arm FF-A support

Add Arm FF-A support implementing Arm Firmware Framework for Armv8-A v1.0

The Firmware Framework for Arm A-profile processors (FF-A v1.0) [1]
describes interfaces (ABIs) that standardize communication
between the Secure World and Normal World leveraging TrustZone
technology.

This driver uses 64-bit registers as per SMCCCv1.2 spec and comes
on top of the SMCCC layer. The driver provides the FF-A ABIs needed for
querying the FF-A framework from the secure world.

The driver uses SMC32 calling convention which means using the first
32-bit data of the Xn registers.

All supported ABIs come with their 32-bit version except FFA_RXTX_MAP
which has 64-bit version supported.

Both 32-bit and 64-bit direct messaging are supported which allows both
32-bit and 64-bit clients to use the FF-A bus.

FF-A is a discoverable bus and similar to architecture features.
FF-A bus is discovered using ARM_SMCCC_FEATURES mechanism performed
by the PSCI driver.

Clients are able to probe then use the FF-A bus by calling the DM class
searching APIs (e.g: uclass_first_device).

The Secure World is considered as one entity to communicate with
using the FF-A bus. FF-A communication is handled by one device and
one instance (the bus). This FF-A driver takes care of all the
interactions between Normal world and Secure World.

The driver exports its operations to be used by upper layers.

Exported operations:

- ffa_partition_info_get
- ffa_sync_send_receive
- ffa_rxtx_unmap

Generic FF-A methods are implemented in the Uclass (arm-ffa-uclass.c).
Arm specific methods are implemented in the Arm driver (arm-ffa.c).

For more details please refer to the driver documentation [2].

[1]: https://developer.arm.com/documentation/den0077/latest/
[2]: doc/arch/arm64.ffa.rst

Signed-off-by: Abdellatif El Khlifi <abdellatif.elkhlifi@arm.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Cc: Tom Rini <trini@konsulko.com>
Cc: Jens Wiklander <jens.wiklander@linaro.org>
Cc: Heinrich Schuchardt <xypron.glpk@gmx.de>

Revert "Merge branch '2023-07-24-introduce-FF-A-suppport'"

This reverts commit d927d1a80843e1c3e2a3f0b8f6150790bef83da1, reversing
changes made to c07ad9520c6190070513016fdb495d4703a4a853.

These changes do not pass CI currently.

Signed-off-by: Tom Rini <trini@konsulko.com>

arm_ffa: introduce Arm FF-A support

Add Arm FF-A support implementing Arm Firmware Framework for Armv8-A v1.0

The Firmware Framework for Arm A-profile processors (FF-A v1.0) [1]
describes interfaces (ABIs) that standardize communication
between the Secure World and Normal World leveraging TrustZone
technology.

This driver uses 64-bit registers as per SMCCCv1.2 spec and comes
on top of the SMCCC layer. The driver provides the FF-A ABIs needed for
querying the FF-A framework from the secure world.

The driver uses SMC32 calling convention which means using the first
32-bit data of the Xn registers.

All supported ABIs come with their 32-bit version except FFA_RXTX_MAP
which has 64-bit version supported.

Both 32-bit and 64-bit direct messaging are supported which allows both
32-bit and 64-bit clients to use the FF-A bus.

FF-A is a discoverable bus and similar to architecture features.
FF-A bus is discovered using ARM_SMCCC_FEATURES mechanism performed
by the PSCI driver.

Clients are able to probe then use the FF-A bus by calling the DM class
searching APIs (e.g: uclass_first_device).

The Secure World is considered as one entity to communicate with
using the FF-A bus. FF-A communication is handled by one device and
one instance (the bus). This FF-A driver takes care of all the
interactions between Normal world and Secure World.

The driver exports its operations to be used by upper layers.

Exported operations:

- ffa_partition_info_get
- ffa_sync_send_receive
- ffa_rxtx_unmap

Generic FF-A methods are implemented in the Uclass (arm-ffa-uclass.c).
Arm specific methods are implemented in the Arm driver (arm-ffa.c).

For more details please refer to the driver documentation [2].

[1]: https://developer.arm.com/documentation/den0077/latest/
[2]: doc/arch/arm64.ffa.rst

Signed-off-by: Abdellatif El Khlifi <abdellatif.elkhlifi@arm.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Cc: Tom Rini <trini@konsulko.com>
Cc: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Cc: Jens Wiklander <jens.wiklander@linaro.org>
Cc: Heinrich Schuchardt <xypron.glpk@gmx.de>

arm_ffa: fix: remove deadcode in ffa_print_error_log()

address the CID 464361 Control flow issues [1]

[1]: https://lore.kernel.org/all/20230821210927.GL3953269@bill-the-cat/

Signed-off-by: Abdellatif El Khlifi <abdellatif.elkhlifi@arm.com>
Cc: Tom Rini <trini@konsulko.com>

arm_ffa: use debug logs

replace info logs with debug logs

Signed-off-by: Abdellatif El Khlifi <abdellatif.elkhlifi@arm.com>
Cc: Tom Rini <trini@konsulko.com>
Cc: Simon Glass <sjg@chromium.org>
Reviewed-by: Simon Glass <sjg@chromium.org>

arm_ffa: introduce Arm FF-A support

Add Arm FF-A support implementing Arm Firmware Framework for Armv8-A v1.0

The Firmware Framework for Arm A-profile processors (FF-A v1.0) [1]
describes interfaces (ABIs) that standardize communication
between the Secure World and Normal World leveraging TrustZone
technology.

This driver uses 64-bit registers as per SMCCCv1.2 spec and comes
on top of the SMCCC layer. The driver provides the FF-A ABIs needed for
querying the FF-A framework from the secure world.

The driver uses SMC32 calling convention which means using the first
32-bit data of the Xn registers.

All supported ABIs come with their 32-bit version except FFA_RXTX_MAP
which has 64-bit version supported.

Both 32-bit and 64-bit direct messaging are supported which allows both
32-bit and 64-bit clients to use the FF-A bus.

FF-A is a discoverable bus and similar to architecture features.
FF-A bus is discovered using ARM_SMCCC_FEATURES mechanism performed
by the PSCI driver.

Clients are able to probe then use the FF-A bus by calling the DM class
searching APIs (e.g: uclass_first_device).

The Secure World is considered as one entity to communicate with
using the FF-A bus. FF-A communication is handled by one device and
one instance (the bus). This FF-A driver takes care of all the
interactions between Normal world and Secure World.

The driver exports its operations to be used by upper layers.

Exported operations:

- ffa_partition_info_get
- ffa_sync_send_receive
- ffa_rxtx_unmap

Generic FF-A methods are implemented in the Uclass (arm-ffa-uclass.c).
Arm specific methods are implemented in the Arm driver (arm-ffa.c).

For more details please refer to the driver documentation [2].

[1]: https://developer.arm.com/documentation/den0077/latest/
[2]: doc/arch/arm64.ffa.rst

Signed-off-by: Abdellatif El Khlifi <abdellatif.elkhlifi@arm.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Cc: Tom Rini <trini@konsulko.com>
Cc: Jens Wiklander <jens.wiklander@linaro.org>
Cc: Heinrich Schuchardt <xypron.glpk@gmx.de>

Revert "Merge branch '2023-07-24-introduce-FF-A-suppport'"

This reverts commit d927d1a80843e1c3e2a3f0b8f6150790bef83da1, reversing
changes made to c07ad9520c6190070513016fdb495d4703a4a853.

These changes do not pass CI currently.

Signed-off-by: Tom Rini <trini@konsulko.com>

arm_ffa: introduce Arm FF-A support

Add Arm FF-A support implementing Arm Firmware Framework for Armv8-A v1.0

The Firmware Framework for Arm A-profile processors (FF-A v1.0) [1]
describes interfaces (ABIs) that standardize communication
between the Secure World and Normal World leveraging TrustZone
technology.

This driver uses 64-bit registers as per SMCCCv1.2 spec and comes
on top of the SMCCC layer. The driver provides the FF-A ABIs needed for
querying the FF-A framework from the secure world.

The driver uses SMC32 calling convention which means using the first
32-bit data of the Xn registers.

All supported ABIs come with their 32-bit version except FFA_RXTX_MAP
which has 64-bit version supported.

Both 32-bit and 64-bit direct messaging are supported which allows both
32-bit and 64-bit clients to use the FF-A bus.

FF-A is a discoverable bus and similar to architecture features.
FF-A bus is discovered using ARM_SMCCC_FEATURES mechanism performed
by the PSCI driver.

Clients are able to probe then use the FF-A bus by calling the DM class
searching APIs (e.g: uclass_first_device).

The Secure World is considered as one entity to communicate with
using the FF-A bus. FF-A communication is handled by one device and
one instance (the bus). This FF-A driver takes care of all the
interactions between Normal world and Secure World.

The driver exports its operations to be used by upper layers.

Exported operations:

- ffa_partition_info_get
- ffa_sync_send_receive
- ffa_rxtx_unmap

Generic FF-A methods are implemented in the Uclass (arm-ffa-uclass.c).
Arm specific methods are implemented in the Arm driver (arm-ffa.c).

For more details please refer to the driver documentation [2].

[1]: https://developer.arm.com/documentation/den0077/latest/
[2]: doc/arch/arm64.ffa.rst

Signed-off-by: Abdellatif El Khlifi <abdellatif.elkhlifi@arm.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Cc: Tom Rini <trini@konsulko.com>
Cc: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Cc: Jens Wiklander <jens.wiklander@linaro.org>
Cc: Heinrich Schuchardt <xypron.glpk@gmx.de>

arm_ffa: fix: remove deadcode in ffa_print_error_log()

address the CID 464361 Control flow issues [1]

[1]: https://lore.kernel.org/all/20230821210927.GL3953269@bill-the-cat/

Signed-off-by: Abdellatif El Khlifi <abdellatif.elkhlifi@arm.com>
Cc: Tom Rini <trini@konsulko.com>

arm_ffa: use debug logs

replace info logs with debug logs

Signed-off-by: Abdellatif El Khlifi <abdellatif.elkhlifi@arm.com>
Cc: Tom Rini <trini@konsulko.com>
Cc: Simon Glass <sjg@chromium.org>
Reviewed-by: Simon Glass <sjg@chromium.org>

arm_ffa: introduce Arm FF-A support

Add Arm FF-A support implementing Arm Firmware Framework for Armv8-A v1.0

The Firmware Framework for Arm A-profile processors (FF-A v1.0) [1]
describes interfaces (ABIs) that standardize communication
between the Secure World and Normal World leveraging TrustZone
technology.

This driver uses 64-bit registers as per SMCCCv1.2 spec and comes
on top of the SMCCC layer. The driver provides the FF-A ABIs needed for
querying the FF-A framework from the secure world.

The driver uses SMC32 calling convention which means using the first
32-bit data of the Xn registers.

All supported ABIs come with their 32-bit version except FFA_RXTX_MAP
which has 64-bit version supported.

Both 32-bit and 64-bit direct messaging are supported which allows both
32-bit and 64-bit clients to use the FF-A bus.

FF-A is a discoverable bus and similar to architecture features.
FF-A bus is discovered using ARM_SMCCC_FEATURES mechanism performed
by the PSCI driver.

Clients are able to probe then use the FF-A bus by calling the DM class
searching APIs (e.g: uclass_first_device).

The Secure World is considered as one entity to communicate with
using the FF-A bus. FF-A communication is handled by one device and
one instance (the bus). This FF-A driver takes care of all the
interactions between Normal world and Secure World.

The driver exports its operations to be used by upper layers.

Exported operations:

- ffa_partition_info_get
- ffa_sync_send_receive
- ffa_rxtx_unmap

Generic FF-A methods are implemented in the Uclass (arm-ffa-uclass.c).
Arm specific methods are implemented in the Arm driver (arm-ffa.c).

For more details please refer to the driver documentation [2].

[1]: https://developer.arm.com/documentation/den0077/latest/
[2]: doc/arch/arm64.ffa.rst

Signed-off-by: Abdellatif El Khlifi <abdellatif.elkhlifi@arm.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Cc: Tom Rini <trini@konsulko.com>
Cc: Jens Wiklander <jens.wiklander@linaro.org>
Cc: Heinrich Schuchardt <xypron.glpk@gmx.de>

Revert "Merge branch '2023-07-24-introduce-FF-A-suppport'"

This reverts commit d927d1a80843e1c3e2a3f0b8f6150790bef83da1, reversing
changes made to c07ad9520c6190070513016fdb495d4703a4a853.

These changes do not pass CI currently.

Signed-off-by: Tom Rini <trini@konsulko.com>

arm_ffa: introduce Arm FF-A support

Add Arm FF-A support implementing Arm Firmware Framework for Armv8-A v1.0

The Firmware Framework for Arm A-profile processors (FF-A v1.0) [1]
describes interfaces (ABIs) that standardize communication
between the Secure World and Normal World leveraging TrustZone
technology.

This driver uses 64-bit registers as per SMCCCv1.2 spec and comes
on top of the SMCCC layer. The driver provides the FF-A ABIs needed for
querying the FF-A framework from the secure world.

The driver uses SMC32 calling convention which means using the first
32-bit data of the Xn registers.

All supported ABIs come with their 32-bit version except FFA_RXTX_MAP
which has 64-bit version supported.

Both 32-bit and 64-bit direct messaging are supported which allows both
32-bit and 64-bit clients to use the FF-A bus.

FF-A is a discoverable bus and similar to architecture features.
FF-A bus is discovered using ARM_SMCCC_FEATURES mechanism performed
by the PSCI driver.

Clients are able to probe then use the FF-A bus by calling the DM class
searching APIs (e.g: uclass_first_device).

The Secure World is considered as one entity to communicate with
using the FF-A bus. FF-A communication is handled by one device and
one instance (the bus). This FF-A driver takes care of all the
interactions between Normal world and Secure World.

The driver exports its operations to be used by upper layers.

Exported operations:

- ffa_partition_info_get
- ffa_sync_send_receive
- ffa_rxtx_unmap

Generic FF-A methods are implemented in the Uclass (arm-ffa-uclass.c).
Arm specific methods are implemented in the Arm driver (arm-ffa.c).

For more details please refer to the driver documentation [2].

[1]: https://developer.arm.com/documentation/den0077/latest/
[2]: doc/arch/arm64.ffa.rst

Signed-off-by: Abdellatif El Khlifi <abdellatif.elkhlifi@arm.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Cc: Tom Rini <trini@konsulko.com>
Cc: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Cc: Jens Wiklander <jens.wiklander@linaro.org>
Cc: Heinrich Schuchardt <xypron.glpk@gmx.de>

arm_ffa: fix: remove deadcode in ffa_print_error_log()

address the CID 464361 Control flow issues [1]

[1]: https://lore.kernel.org/all/20230821210927.GL3953269@bill-the-cat/

Signed-off-by: Abdellatif El Khlifi <abdellatif.elkhlifi@arm.com>
Cc: Tom Rini <trini@konsulko.com>

arm_ffa: use debug logs

replace info logs with debug logs

Signed-off-by: Abdellatif El Khlifi <abdellatif.elkhlifi@arm.com>
Cc: Tom Rini <trini@konsulko.com>
Cc: Simon Glass <sjg@chromium.org>
Reviewed-by: Simon Glass <sjg@chromium.org>

arm_ffa: introduce Arm FF-A support

Add Arm FF-A support implementing Arm Firmware Framework for Armv8-A v1.0

The Firmware Framework for Arm A-profile processors (FF-A v1.0) [1]
describes interfaces (ABIs) that standardize communication
between the Secure World and Normal World leveraging TrustZone
technology.

This driver uses 64-bit registers as per SMCCCv1.2 spec and comes
on top of the SMCCC layer. The driver provides the FF-A ABIs needed for
querying the FF-A framework from the secure world.

The driver uses SMC32 calling convention which means using the first
32-bit data of the Xn registers.

All supported ABIs come with their 32-bit version except FFA_RXTX_MAP
which has 64-bit version supported.

Both 32-bit and 64-bit direct messaging are supported which allows both
32-bit and 64-bit clients to use the FF-A bus.

FF-A is a discoverable bus and similar to architecture features.
FF-A bus is discovered using ARM_SMCCC_FEATURES mechanism performed
by the PSCI driver.

Clients are able to probe then use the FF-A bus by calling the DM class
searching APIs (e.g: uclass_first_device).

The Secure World is considered as one entity to communicate with
using the FF-A bus. FF-A communication is handled by one device and
one instance (the bus). This FF-A driver takes care of all the
interactions between Normal world and Secure World.

The driver exports its operations to be used by upper layers.

Exported operations:

- ffa_partition_info_get
- ffa_sync_send_receive
- ffa_rxtx_unmap

Generic FF-A methods are implemented in the Uclass (arm-ffa-uclass.c).
Arm specific methods are implemented in the Arm driver (arm-ffa.c).

For more details please refer to the driver documentation [2].

[1]: https://developer.arm.com/documentation/den0077/latest/
[2]: doc/arch/arm64.ffa.rst

Signed-off-by: Abdellatif El Khlifi <abdellatif.elkhlifi@arm.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Cc: Tom Rini <trini@konsulko.com>
Cc: Jens Wiklander <jens.wiklander@linaro.org>
Cc: Heinrich Schuchardt <xypron.glpk@gmx.de>

Revert "Merge branch '2023-07-24-introduce-FF-A-suppport'"

This reverts commit d927d1a80843e1c3e2a3f0b8f6150790bef83da1, reversing
changes made to c07ad9520c6190070513016fdb495d4703a4a853.

These changes do not pass CI currently.

Signed-off-by: Tom Rini <trini@konsulko.com>

arm_ffa: introduce Arm FF-A support

Add Arm FF-A support implementing Arm Firmware Framework for Armv8-A v1.0

The Firmware Framework for Arm A-profile processors (FF-A v1.0) [1]
describes interfaces (ABIs) that standardize communication
between the Secure World and Normal World leveraging TrustZone
technology.

This driver uses 64-bit registers as per SMCCCv1.2 spec and comes
on top of the SMCCC layer. The driver provides the FF-A ABIs needed for
querying the FF-A framework from the secure world.

The driver uses SMC32 calling convention which means using the first
32-bit data of the Xn registers.

All supported ABIs come with their 32-bit version except FFA_RXTX_MAP
which has 64-bit version supported.

Both 32-bit and 64-bit direct messaging are supported which allows both
32-bit and 64-bit clients to use the FF-A bus.

FF-A is a discoverable bus and similar to architecture features.
FF-A bus is discovered using ARM_SMCCC_FEATURES mechanism performed
by the PSCI driver.

Clients are able to probe then use the FF-A bus by calling the DM class
searching APIs (e.g: uclass_first_device).

The Secure World is considered as one entity to communicate with
using the FF-A bus. FF-A communication is handled by one device and
one instance (the bus). This FF-A driver takes care of all the
interactions between Normal world and Secure World.

The driver exports its operations to be used by upper layers.

Exported operations:

- ffa_partition_info_get
- ffa_sync_send_receive
- ffa_rxtx_unmap

Generic FF-A methods are implemented in the Uclass (arm-ffa-uclass.c).
Arm specific methods are implemented in the Arm driver (arm-ffa.c).

For more details please refer to the driver documentation [2].

[1]: https://developer.arm.com/documentation/den0077/latest/
[2]: doc/arch/arm64.ffa.rst

Signed-off-by: Abdellatif El Khlifi <abdellatif.elkhlifi@arm.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Cc: Tom Rini <trini@konsulko.com>
Cc: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Cc: Jens Wiklander <jens.wiklander@linaro.org>
Cc: Heinrich Schuchardt <xypron.glpk@gmx.de>

arm_ffa: fix: remove deadcode in ffa_print_error_log()

address the CID 464361 Control flow issues [1]

[1]: https://lore.kernel.org/all/20230821210927.GL3953269@bill-the-cat/

Signed-off-by: Abdellatif El Khlifi <abdellatif.elkhlifi@arm.com>
Cc: Tom Rini <trini@konsulko.com>

arm_ffa: use debug logs

replace info logs with debug logs

Signed-off-by: Abdellatif El Khlifi <abdellatif.elkhlifi@arm.com>
Cc: Tom Rini <trini@konsulko.com>
Cc: Simon Glass <sjg@chromium.org>
Reviewed-by: Simon Glass <sjg@chromium.org>

arm_ffa: introduce Arm FF-A support

Add Arm FF-A support implementing Arm Firmware Framework for Armv8-A v1.0

The Firmware Framework for Arm A-profile processors (FF-A v1.0) [1]
describes interfaces (ABIs) that standardize communication
between the Secure World and Normal World leveraging TrustZone
technology.

This driver uses 64-bit registers as per SMCCCv1.2 spec and comes
on top of the SMCCC layer. The driver provides the FF-A ABIs needed for
querying the FF-A framework from the secure world.

The driver uses SMC32 calling convention which means using the first
32-bit data of the Xn registers.

All supported ABIs come with their 32-bit version except FFA_RXTX_MAP
which has 64-bit version supported.

Both 32-bit and 64-bit direct messaging are supported which allows both
32-bit and 64-bit clients to use the FF-A bus.

FF-A is a discoverable bus and similar to architecture features.
FF-A bus is discovered using ARM_SMCCC_FEATURES mechanism performed
by the PSCI driver.

Clients are able to probe then use the FF-A bus by calling the DM class
searching APIs (e.g: uclass_first_device).

The Secure World is considered as one entity to communicate with
using the FF-A bus. FF-A communication is handled by one device and
one instance (the bus). This FF-A driver takes care of all the
interactions between Normal world and Secure World.

The driver exports its operations to be used by upper layers.

Exported operations:

- ffa_partition_info_get
- ffa_sync_send_receive
- ffa_rxtx_unmap

Generic FF-A methods are implemented in the Uclass (arm-ffa-uclass.c).
Arm specific methods are implemented in the Arm driver (arm-ffa.c).

For more details please refer to the driver documentation [2].

[1]: https://developer.arm.com/documentation/den0077/latest/
[2]: doc/arch/arm64.ffa.rst

Signed-off-by: Abdellatif El Khlifi <abdellatif.elkhlifi@arm.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Cc: Tom Rini <trini@konsulko.com>
Cc: Jens Wiklander <jens.wiklander@linaro.org>
Cc: Heinrich Schuchardt <xypron.glpk@gmx.de>

Revert "Merge branch '2023-07-24-introduce-FF-A-suppport'"

This reverts commit d927d1a80843e1c3e2a3f0b8f6150790bef83da1, reversing
changes made to c07ad9520c6190070513016fdb495d4703a4a853.

These changes do not pass CI currently.

Signed-off-by: Tom Rini <trini@konsulko.com>

arm_ffa: introduce Arm FF-A support

Add Arm FF-A support implementing Arm Firmware Framework for Armv8-A v1.0

The Firmware Framework for Arm A-profile processors (FF-A v1.0) [1]
describes interfaces (ABIs) that standardize communication
between the Secure World and Normal World leveraging TrustZone
technology.

This driver uses 64-bit registers as per SMCCCv1.2 spec and comes
on top of the SMCCC layer. The driver provides the FF-A ABIs needed for
querying the FF-A framework from the secure world.

The driver uses SMC32 calling convention which means using the first
32-bit data of the Xn registers.

All supported ABIs come with their 32-bit version except FFA_RXTX_MAP
which has 64-bit version supported.

Both 32-bit and 64-bit direct messaging are supported which allows both
32-bit and 64-bit clients to use the FF-A bus.

FF-A is a discoverable bus and similar to architecture features.
FF-A bus is discovered using ARM_SMCCC_FEATURES mechanism performed
by the PSCI driver.

Clients are able to probe then use the FF-A bus by calling the DM class
searching APIs (e.g: uclass_first_device).

The Secure World is considered as one entity to communicate with
using the FF-A bus. FF-A communication is handled by one device and
one instance (the bus). This FF-A driver takes care of all the
interactions between Normal world and Secure World.

The driver exports its operations to be used by upper layers.

Exported operations:

- ffa_partition_info_get
- ffa_sync_send_receive
- ffa_rxtx_unmap

Generic FF-A methods are implemented in the Uclass (arm-ffa-uclass.c).
Arm specific methods are implemented in the Arm driver (arm-ffa.c).

For more details please refer to the driver documentation [2].

[1]: https://developer.arm.com/documentation/den0077/latest/
[2]: doc/arch/arm64.ffa.rst

Signed-off-by: Abdellatif El Khlifi <abdellatif.elkhlifi@arm.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Cc: Tom Rini <trini@konsulko.com>
Cc: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Cc: Jens Wiklander <jens.wiklander@linaro.org>
Cc: Heinrich Schuchardt <xypron.glpk@gmx.de>

arm_ffa: fix: remove deadcode in ffa_print_error_log()

address the CID 464361 Control flow issues [1]

[1]: https://lore.kernel.org/all/20230821210927.GL3953269@bill-the-cat/

Signed-off-by: Abdellatif El Khlifi <abdellatif.elkhlifi@arm.com>
Cc: Tom Rini <trini@konsulko.com>

arm_ffa: use debug logs

replace info logs with debug logs

Signed-off-by: Abdellatif El Khlifi <abdellatif.elkhlifi@arm.com>
Cc: Tom Rini <trini@konsulko.com>
Cc: Simon Glass <sjg@chromium.org>
Reviewed-by: Simon Glass <sjg@chromium.org>

arm_ffa: introduce Arm FF-A support

Add Arm FF-A support implementing Arm Firmware Framework for Armv8-A v1.0

The Firmware Framework for Arm A-profile processors (FF-A v1.0) [1]
describes interfaces (ABIs) that standardize communication
between the Secure World and Normal World leveraging TrustZone
technology.

This driver uses 64-bit registers as per SMCCCv1.2 spec and comes
on top of the SMCCC layer. The driver provides the FF-A ABIs needed for
querying the FF-A framework from the secure world.

The driver uses SMC32 calling convention which means using the first
32-bit data of the Xn registers.

All supported ABIs come with their 32-bit version except FFA_RXTX_MAP
which has 64-bit version supported.

Both 32-bit and 64-bit direct messaging are supported which allows both
32-bit and 64-bit clients to use the FF-A bus.

FF-A is a discoverable bus and similar to architecture features.
FF-A bus is discovered using ARM_SMCCC_FEATURES mechanism performed
by the PSCI driver.

Clients are able to probe then use the FF-A bus by calling the DM class
searching APIs (e.g: uclass_first_device).

The Secure World is considered as one entity to communicate with
using the FF-A bus. FF-A communication is handled by one device and
one instance (the bus). This FF-A driver takes care of all the
interactions between Normal world and Secure World.

The driver exports its operations to be used by upper layers.

Exported operations:

- ffa_partition_info_get
- ffa_sync_send_receive
- ffa_rxtx_unmap

Generic FF-A methods are implemented in the Uclass (arm-ffa-uclass.c).
Arm specific methods are implemented in the Arm driver (arm-ffa.c).

For more details please refer to the driver documentation [2].

[1]: https://developer.arm.com/documentation/den0077/latest/
[2]: doc/arch/arm64.ffa.rst

Signed-off-by: Abdellatif El Khlifi <abdellatif.elkhlifi@arm.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Cc: Tom Rini <trini@konsulko.com>
Cc: Jens Wiklander <jens.wiklander@linaro.org>
Cc: Heinrich Schuchardt <xypron.glpk@gmx.de>

Revert "Merge branch '2023-07-24-introduce-FF-A-suppport'"

This reverts commit d927d1a80843e1c3e2a3f0b8f6150790bef83da1, reversing
changes made to c07ad9520c6190070513016fdb495d4703a4a853.

These changes do not pass CI currently.

Signed-off-by: Tom Rini <trini@konsulko.com>

arm_ffa: introduce Arm FF-A support

Add Arm FF-A support implementing Arm Firmware Framework for Armv8-A v1.0

The Firmware Framework for Arm A-profile processors (FF-A v1.0) [1]
describes interfaces (ABIs) that standardize communication
between the Secure World and Normal World leveraging TrustZone
technology.

This driver uses 64-bit registers as per SMCCCv1.2 spec and comes
on top of the SMCCC layer. The driver provides the FF-A ABIs needed for
querying the FF-A framework from the secure world.

The driver uses SMC32 calling convention which means using the first
32-bit data of the Xn registers.

All supported ABIs come with their 32-bit version except FFA_RXTX_MAP
which has 64-bit version supported.

Both 32-bit and 64-bit direct messaging are supported which allows both
32-bit and 64-bit clients to use the FF-A bus.

FF-A is a discoverable bus and similar to architecture features.
FF-A bus is discovered using ARM_SMCCC_FEATURES mechanism performed
by the PSCI driver.

Clients are able to probe then use the FF-A bus by calling the DM class
searching APIs (e.g: uclass_first_device).

The Secure World is considered as one entity to communicate with
using the FF-A bus. FF-A communication is handled by one device and
one instance (the bus). This FF-A driver takes care of all the
interactions between Normal world and Secure World.

The driver exports its operations to be used by upper layers.

Exported operations:

- ffa_partition_info_get
- ffa_sync_send_receive
- ffa_rxtx_unmap

Generic FF-A methods are implemented in the Uclass (arm-ffa-uclass.c).
Arm specific methods are implemented in the Arm driver (arm-ffa.c).

For more details please refer to the driver documentation [2].

[1]: https://developer.arm.com/documentation/den0077/latest/
[2]: doc/arch/arm64.ffa.rst

Signed-off-by: Abdellatif El Khlifi <abdellatif.elkhlifi@arm.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Cc: Tom Rini <trini@konsulko.com>
Cc: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Cc: Jens Wiklander <jens.wiklander@linaro.org>
Cc: Heinrich Schuchardt <xypron.glpk@gmx.de>

arm_ffa: fix: remove deadcode in ffa_print_error_log()

address the CID 464361 Control flow issues [1]

[1]: https://lore.kernel.org/all/20230821210927.GL3953269@bill-the-cat/

Signed-off-by: Abdellatif El Khlifi <abdellatif.elkhlifi@arm.com>
Cc: Tom Rini <trini@konsulko.com>

arm_ffa: use debug logs

replace info logs with debug logs

Signed-off-by: Abdellatif El Khlifi <abdellatif.elkhlifi@arm.com>
Cc: Tom Rini <trini@konsulko.com>
Cc: Simon Glass <sjg@chromium.org>
Reviewed-by: Simon Glass <sjg@chromium.org>

arm_ffa: introduce Arm FF-A support

Add Arm FF-A support implementing Arm Firmware Framework for Armv8-A v1.0

The Firmware Framework for Arm A-profile processors (FF-A v1.0) [1]
describes interfaces (ABIs) that standardize communication
between the Secure World and Normal World leveraging TrustZone
technology.

This driver uses 64-bit registers as per SMCCCv1.2 spec and comes
on top of the SMCCC layer. The driver provides the FF-A ABIs needed for
querying the FF-A framework from the secure world.

The driver uses SMC32 calling convention which means using the first
32-bit data of the Xn registers.

All supported ABIs come with their 32-bit version except FFA_RXTX_MAP
which has 64-bit version supported.

Both 32-bit and 64-bit direct messaging are supported which allows both
32-bit and 64-bit clients to use the FF-A bus.

FF-A is a discoverable bus and similar to architecture features.
FF-A bus is discovered using ARM_SMCCC_FEATURES mechanism performed
by the PSCI driver.

Clients are able to probe then use the FF-A bus by calling the DM class
searching APIs (e.g: uclass_first_device).

The Secure World is considered as one entity to communicate with
using the FF-A bus. FF-A communication is handled by one device and
one instance (the bus). This FF-A driver takes care of all the
interactions between Normal world and Secure World.

The driver exports its operations to be used by upper layers.

Exported operations:

- ffa_partition_info_get
- ffa_sync_send_receive
- ffa_rxtx_unmap

Generic FF-A methods are implemented in the Uclass (arm-ffa-uclass.c).
Arm specific methods are implemented in the Arm driver (arm-ffa.c).

For more details please refer to the driver documentation [2].

[1]: https://developer.arm.com/documentation/den0077/latest/
[2]: doc/arch/arm64.ffa.rst

Signed-off-by: Abdellatif El Khlifi <abdellatif.elkhlifi@arm.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Cc: Tom Rini <trini@konsulko.com>
Cc: Jens Wiklander <jens.wiklander@linaro.org>
Cc: Heinrich Schuchardt <xypron.glpk@gmx.de>

Revert "Merge branch '2023-07-24-introduce-FF-A-suppport'"

This reverts commit d927d1a80843e1c3e2a3f0b8f6150790bef83da1, reversing
changes made to c07ad9520c6190070513016fdb495d4703a4a853.

These changes do not pass CI currently.

Signed-off-by: Tom Rini <trini@konsulko.com>

arm_ffa: introduce Arm FF-A support

Add Arm FF-A support implementing Arm Firmware Framework for Armv8-A v1.0

The Firmware Framework for Arm A-profile processors (FF-A v1.0) [1]
describes interfaces (ABIs) that standardize communication
between the Secure World and Normal World leveraging TrustZone
technology.

This driver uses 64-bit registers as per SMCCCv1.2 spec and comes
on top of the SMCCC layer. The driver provides the FF-A ABIs needed for
querying the FF-A framework from the secure world.

The driver uses SMC32 calling convention which means using the first
32-bit data of the Xn registers.

All supported ABIs come with their 32-bit version except FFA_RXTX_MAP
which has 64-bit version supported.

Both 32-bit and 64-bit direct messaging are supported which allows both
32-bit and 64-bit clients to use the FF-A bus.

FF-A is a discoverable bus and similar to architecture features.
FF-A bus is discovered using ARM_SMCCC_FEATURES mechanism performed
by the PSCI driver.

Clients are able to probe then use the FF-A bus by calling the DM class
searching APIs (e.g: uclass_first_device).

The Secure World is considered as one entity to communicate with
using the FF-A bus. FF-A communication is handled by one device and
one instance (the bus). This FF-A driver takes care of all the
interactions between Normal world and Secure World.

The driver exports its operations to be used by upper layers.

Exported operations:

- ffa_partition_info_get
- ffa_sync_send_receive
- ffa_rxtx_unmap

Generic FF-A methods are implemented in the Uclass (arm-ffa-uclass.c).
Arm specific methods are implemented in the Arm driver (arm-ffa.c).

For more details please refer to the driver documentation [2].

[1]: https://developer.arm.com/documentation/den0077/latest/
[2]: doc/arch/arm64.ffa.rst

Signed-off-by: Abdellatif El Khlifi <abdellatif.elkhlifi@arm.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Cc: Tom Rini <trini@konsulko.com>
Cc: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Cc: Jens Wiklander <jens.wiklander@linaro.org>
Cc: Heinrich Schuchardt <xypron.glpk@gmx.de>

arm_ffa: fix: remove deadcode in ffa_print_error_log()

address the CID 464361 Control flow issues [1]

[1]: https://lore.kernel.org/all/20230821210927.GL3953269@bill-the-cat/

Signed-off-by: Abdellatif El Khlifi <abdellatif.elkhlifi@arm.com>
Cc: Tom Rini <trini@konsulko.com>

arm_ffa: use debug logs

replace info logs with debug logs

Signed-off-by: Abdellatif El Khlifi <abdellatif.elkhlifi@arm.com>
Cc: Tom Rini <trini@konsulko.com>
Cc: Simon Glass <sjg@chromium.org>
Reviewed-by: Simon Glass <sjg@chromium.org>

arm_ffa: introduce Arm FF-A support

Add Arm FF-A support implementing Arm Firmware Framework for Armv8-A v1.0

The Firmware Framework for Arm A-profile processors (FF-A v1.0) [1]
describes interfaces (ABIs) that standardize communication
between the Secure World and Normal World leveraging TrustZone
technology.

This driver uses 64-bit registers as per SMCCCv1.2 spec and comes
on top of the SMCCC layer. The driver provides the FF-A ABIs needed for
querying the FF-A framework from the secure world.

The driver uses SMC32 calling convention which means using the first
32-bit data of the Xn registers.

All supported ABIs come with their 32-bit version except FFA_RXTX_MAP
which has 64-bit version supported.

Both 32-bit and 64-bit direct messaging are supported which allows both
32-bit and 64-bit clients to use the FF-A bus.

FF-A is a discoverable bus and similar to architecture features.
FF-A bus is discovered using ARM_SMCCC_FEATURES mechanism performed
by the PSCI driver.

Clients are able to probe then use the FF-A bus by calling the DM class
searching APIs (e.g: uclass_first_device).

The Secure World is considered as one entity to communicate with
using the FF-A bus. FF-A communication is handled by one device and
one instance (the bus). This FF-A driver takes care of all the
interactions between Normal world and Secure World.

The driver exports its operations to be used by upper layers.

Exported operations:

- ffa_partition_info_get
- ffa_sync_send_receive
- ffa_rxtx_unmap

Generic FF-A methods are implemented in the Uclass (arm-ffa-uclass.c).
Arm specific methods are implemented in the Arm driver (arm-ffa.c).

For more details please refer to the driver documentation [2].

[1]: https://developer.arm.com/documentation/den0077/latest/
[2]: doc/arch/arm64.ffa.rst

Signed-off-by: Abdellatif El Khlifi <abdellatif.elkhlifi@arm.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Cc: Tom Rini <trini@konsulko.com>
Cc: Jens Wiklander <jens.wiklander@linaro.org>
Cc: Heinrich Schuchardt <xypron.glpk@gmx.de>

Revert "Merge branch '2023-07-24-introduce-FF-A-suppport'"

This reverts commit d927d1a80843e1c3e2a3f0b8f6150790bef83da1, reversing
changes made to c07ad9520c6190070513016fdb495d4703a4a853.

These changes do not pass CI currently.

Signed-off-by: Tom Rini <trini@konsulko.com>

arm_ffa: introduce Arm FF-A support

Add Arm FF-A support implementing Arm Firmware Framework for Armv8-A v1.0

The Firmware Framework for Arm A-profile processors (FF-A v1.0) [1]
describes interfaces (ABIs) that standardize communication
between the Secure World and Normal World leveraging TrustZone
technology.

This driver uses 64-bit registers as per SMCCCv1.2 spec and comes
on top of the SMCCC layer. The driver provides the FF-A ABIs needed for
querying the FF-A framework from the secure world.

The driver uses SMC32 calling convention which means using the first
32-bit data of the Xn registers.

All supported ABIs come with their 32-bit version except FFA_RXTX_MAP
which has 64-bit version supported.

Both 32-bit and 64-bit direct messaging are supported which allows both
32-bit and 64-bit clients to use the FF-A bus.

FF-A is a discoverable bus and similar to architecture features.
FF-A bus is discovered using ARM_SMCCC_FEATURES mechanism performed
by the PSCI driver.

Clients are able to probe then use the FF-A bus by calling the DM class
searching APIs (e.g: uclass_first_device).

The Secure World is considered as one entity to communicate with
using the FF-A bus. FF-A communication is handled by one device and
one instance (the bus). This FF-A driver takes care of all the
interactions between Normal world and Secure World.

The driver exports its operations to be used by upper layers.

Exported operations:

- ffa_partition_info_get
- ffa_sync_send_receive
- ffa_rxtx_unmap

Generic FF-A methods are implemented in the Uclass (arm-ffa-uclass.c).
Arm specific methods are implemented in the Arm driver (arm-ffa.c).

For more details please refer to the driver documentation [2].

[1]: https://developer.arm.com/documentation/den0077/latest/
[2]: doc/arch/arm64.ffa.rst

Signed-off-by: Abdellatif El Khlifi <abdellatif.elkhlifi@arm.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Cc: Tom Rini <trini@konsulko.com>
Cc: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Cc: Jens Wiklander <jens.wiklander@linaro.org>
Cc: Heinrich Schuchardt <xypron.glpk@gmx.de>

arm_ffa: fix: remove deadcode in ffa_print_error_log()

address the CID 464361 Control flow issues [1]

[1]: https://lore.kernel.org/all/20230821210927.GL3953269@bill-the-cat/

Signed-off-by: Abdellatif El Khlifi <abdellatif.elkhlifi@arm.com>
Cc: Tom Rini <trini@konsulko.com>

arm_ffa: use debug logs

replace info logs with debug logs

Signed-off-by: Abdellatif El Khlifi <abdellatif.elkhlifi@arm.com>
Cc: Tom Rini <trini@konsulko.com>
Cc: Simon Glass <sjg@chromium.org>
Reviewed-by: Simon Glass <sjg@chromium.org>

arm_ffa: introduce Arm FF-A support

Add Arm FF-A support implementing Arm Firmware Framework for Armv8-A v1.0

The Firmware Framework for Arm A-profile processors (FF-A v1.0) [1]
describes interfaces (ABIs) that standardize communication
between the Secure World and Normal World leveraging TrustZone
technology.

This driver uses 64-bit registers as per SMCCCv1.2 spec and comes
on top of the SMCCC layer. The driver provides the FF-A ABIs needed for
querying the FF-A framework from the secure world.

The driver uses SMC32 calling convention which means using the first
32-bit data of the Xn registers.

All supported ABIs come with their 32-bit version except FFA_RXTX_MAP
which has 64-bit version supported.

Both 32-bit and 64-bit direct messaging are supported which allows both
32-bit and 64-bit clients to use the FF-A bus.

FF-A is a discoverable bus and similar to architecture features.
FF-A bus is discovered using ARM_SMCCC_FEATURES mechanism performed
by the PSCI driver.

Clients are able to probe then use the FF-A bus by calling the DM class
searching APIs (e.g: uclass_first_device).

The Secure World is considered as one entity to communicate with
using the FF-A bus. FF-A communication is handled by one device and
one instance (the bus). This FF-A driver takes care of all the
interactions between Normal world and Secure World.

The driver exports its operations to be used by upper layers.

Exported operations:

- ffa_partition_info_get
- ffa_sync_send_receive
- ffa_rxtx_unmap

Generic FF-A methods are implemented in the Uclass (arm-ffa-uclass.c).
Arm specific methods are implemented in the Arm driver (arm-ffa.c).

For more details please refer to the driver documentation [2].

[1]: https://developer.arm.com/documentation/den0077/latest/
[2]: doc/arch/arm64.ffa.rst

Signed-off-by: Abdellatif El Khlifi <abdellatif.elkhlifi@arm.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Cc: Tom Rini <trini@konsulko.com>
Cc: Jens Wiklander <jens.wiklander@linaro.org>
Cc: Heinrich Schuchardt <xypron.glpk@gmx.de>

Revert "Merge branch '2023-07-24-introduce-FF-A-suppport'"

This reverts commit d927d1a80843e1c3e2a3f0b8f6150790bef83da1, reversing
changes made to c07ad9520c6190070513016fdb495d4703a4a853.

These changes do not pass CI currently.

Signed-off-by: Tom Rini <trini@konsulko.com>

arm_ffa: introduce Arm FF-A support

Add Arm FF-A support implementing Arm Firmware Framework for Armv8-A v1.0

The Firmware Framework for Arm A-profile processors (FF-A v1.0) [1]
describes interfaces (ABIs) that standardize communication
between the Secure World and Normal World leveraging TrustZone
technology.

This driver uses 64-bit registers as per SMCCCv1.2 spec and comes
on top of the SMCCC layer. The driver provides the FF-A ABIs needed for
querying the FF-A framework from the secure world.

The driver uses SMC32 calling convention which means using the first
32-bit data of the Xn registers.

All supported ABIs come with their 32-bit version except FFA_RXTX_MAP
which has 64-bit version supported.

Both 32-bit and 64-bit direct messaging are supported which allows both
32-bit and 64-bit clients to use the FF-A bus.

FF-A is a discoverable bus and similar to architecture features.
FF-A bus is discovered using ARM_SMCCC_FEATURES mechanism performed
by the PSCI driver.

Clients are able to probe then use the FF-A bus by calling the DM class
searching APIs (e.g: uclass_first_device).

The Secure World is considered as one entity to communicate with
using the FF-A bus. FF-A communication is handled by one device and
one instance (the bus). This FF-A driver takes care of all the
interactions between Normal world and Secure World.

The driver exports its operations to be used by upper layers.

Exported operations:

- ffa_partition_info_get
- ffa_sync_send_receive
- ffa_rxtx_unmap

Generic FF-A methods are implemented in the Uclass (arm-ffa-uclass.c).
Arm specific methods are implemented in the Arm driver (arm-ffa.c).

For more details please refer to the driver documentation [2].

[1]: https://developer.arm.com/documentation/den0077/latest/
[2]: doc/arch/arm64.ffa.rst

Signed-off-by: Abdellatif El Khlifi <abdellatif.elkhlifi@arm.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Cc: Tom Rini <trini@konsulko.com>
Cc: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Cc: Jens Wiklander <jens.wiklander@linaro.org>
Cc: Heinrich Schuchardt <xypron.glpk@gmx.de>

arm_ffa: fix: remove deadcode in ffa_print_error_log()

address the CID 464361 Control flow issues [1]

[1]: https://lore.kernel.org/all/20230821210927.GL3953269@bill-the-cat/

Signed-off-by: Abdellatif El Khlifi <abdellatif.elkhlifi@arm.com>
Cc: Tom Rini <trini@konsulko.com>

arm_ffa: use debug logs

replace info logs with debug logs

Signed-off-by: Abdellatif El Khlifi <abdellatif.elkhlifi@arm.com>
Cc: Tom Rini <trini@konsulko.com>
Cc: Simon Glass <sjg@chromium.org>
Reviewed-by: Simon Glass <sjg@chromium.org>

arm_ffa: introduce Arm FF-A support

Add Arm FF-A support implementing Arm Firmware Framework for Armv8-A v1.0

The Firmware Framework for Arm A-profile processors (FF-A v1.0) [1]
describes interfaces (ABIs) that standardize communication
between the Secure World and Normal World leveraging TrustZone
technology.

This driver uses 64-bit registers as per SMCCCv1.2 spec and comes
on top of the SMCCC layer. The driver provides the FF-A ABIs needed for
querying the FF-A framework from the secure world.

The driver uses SMC32 calling convention which means using the first
32-bit data of the Xn registers.

All supported ABIs come with their 32-bit version except FFA_RXTX_MAP
which has 64-bit version supported.

Both 32-bit and 64-bit direct messaging are supported which allows both
32-bit and 64-bit clients to use the FF-A bus.

FF-A is a discoverable bus and similar to architecture features.
FF-A bus is discovered using ARM_SMCCC_FEATURES mechanism performed
by the PSCI driver.

Clients are able to probe then use the FF-A bus by calling the DM class
searching APIs (e.g: uclass_first_device).

The Secure World is considered as one entity to communicate with
using the FF-A bus. FF-A communication is handled by one device and
one instance (the bus). This FF-A driver takes care of all the
interactions between Normal world and Secure World.

The driver exports its operations to be used by upper layers.

Exported operations:

- ffa_partition_info_get
- ffa_sync_send_receive
- ffa_rxtx_unmap

Generic FF-A methods are implemented in the Uclass (arm-ffa-uclass.c).
Arm specific methods are implemented in the Arm driver (arm-ffa.c).

For more details please refer to the driver documentation [2].

[1]: https://developer.arm.com/documentation/den0077/latest/
[2]: doc/arch/arm64.ffa.rst

Signed-off-by: Abdellatif El Khlifi <abdellatif.elkhlifi@arm.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Cc: Tom Rini <trini@konsulko.com>
Cc: Jens Wiklander <jens.wiklander@linaro.org>
Cc: Heinrich Schuchardt <xypron.glpk@gmx.de>

Revert "Merge branch '2023-07-24-introduce-FF-A-suppport'"

This reverts commit d927d1a80843e1c3e2a3f0b8f6150790bef83da1, reversing
changes made to c07ad9520c6190070513016fdb495d4703a4a853.

These changes do not pass CI currently.

Signed-off-by: Tom Rini <trini@konsulko.com>

arm_ffa: introduce Arm FF-A support

Add Arm FF-A support implementing Arm Firmware Framework for Armv8-A v1.0

The Firmware Framework for Arm A-profile processors (FF-A v1.0) [1]
describes interfaces (ABIs) that standardize communication
between the Secure World and Normal World leveraging TrustZone
technology.

This driver uses 64-bit registers as per SMCCCv1.2 spec and comes
on top of the SMCCC layer. The driver provides the FF-A ABIs needed for
querying the FF-A framework from the secure world.

The driver uses SMC32 calling convention which means using the first
32-bit data of the Xn registers.

All supported ABIs come with their 32-bit version except FFA_RXTX_MAP
which has 64-bit version supported.

Both 32-bit and 64-bit direct messaging are supported which allows both
32-bit and 64-bit clients to use the FF-A bus.

FF-A is a discoverable bus and similar to architecture features.
FF-A bus is discovered using ARM_SMCCC_FEATURES mechanism performed
by the PSCI driver.

Clients are able to probe then use the FF-A bus by calling the DM class
searching APIs (e.g: uclass_first_device).

The Secure World is considered as one entity to communicate with
using the FF-A bus. FF-A communication is handled by one device and
one instance (the bus). This FF-A driver takes care of all the
interactions between Normal world and Secure World.

The driver exports its operations to be used by upper layers.

Exported operations:

- ffa_partition_info_get
- ffa_sync_send_receive
- ffa_rxtx_unmap

Generic FF-A methods are implemented in the Uclass (arm-ffa-uclass.c).
Arm specific methods are implemented in the Arm driver (arm-ffa.c).

For more details please refer to the driver documentation [2].

[1]: https://developer.arm.com/documentation/den0077/latest/
[2]: doc/arch/arm64.ffa.rst

Signed-off-by: Abdellatif El Khlifi <abdellatif.elkhlifi@arm.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Cc: Tom Rini <trini@konsulko.com>
Cc: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Cc: Jens Wiklander <jens.wiklander@linaro.org>
Cc: Heinrich Schuchardt <xypron.glpk@gmx.de>

arm_ffa: fix: remove deadcode in ffa_print_error_log()

address the CID 464361 Control flow issues [1]

[1]: https://lore.kernel.org/all/20230821210927.GL3953269@bill-the-cat/

Signed-off-by: Abdellatif El Khlifi <abdellatif.elkhlifi@arm.com>
Cc: Tom Rini <trini@konsulko.com>

arm_ffa: use debug logs

replace info logs with debug logs

Signed-off-by: Abdellatif El Khlifi <abdellatif.elkhlifi@arm.com>
Cc: Tom Rini <trini@konsulko.com>
Cc: Simon Glass <sjg@chromium.org>
Reviewed-by: Simon Glass <sjg@chromium.org>

arm_ffa: introduce Arm FF-A support

Add Arm FF-A support implementing Arm Firmware Framework for Armv8-A v1.0

The Firmware Framework for Arm A-profile processors (FF-A v1.0) [1]
describes interfaces (ABIs) that standardize communication
between the Secure World and Normal World leveraging TrustZone
technology.

This driver uses 64-bit registers as per SMCCCv1.2 spec and comes
on top of the SMCCC layer. The driver provides the FF-A ABIs needed for
querying the FF-A framework from the secure world.

The driver uses SMC32 calling convention which means using the first
32-bit data of the Xn registers.

All supported ABIs come with their 32-bit version except FFA_RXTX_MAP
which has 64-bit version supported.

Both 32-bit and 64-bit direct messaging are supported which allows both
32-bit and 64-bit clients to use the FF-A bus.

FF-A is a discoverable bus and similar to architecture features.
FF-A bus is discovered using ARM_SMCCC_FEATURES mechanism performed
by the PSCI driver.

Clients are able to probe then use the FF-A bus by calling the DM class
searching APIs (e.g: uclass_first_device).

The Secure World is considered as one entity to communicate with
using the FF-A bus. FF-A communication is handled by one device and
one instance (the bus). This FF-A driver takes care of all the
interactions between Normal world and Secure World.

The driver exports its operations to be used by upper layers.

Exported operations:

- ffa_partition_info_get
- ffa_sync_send_receive
- ffa_rxtx_unmap

Generic FF-A methods are implemented in the Uclass (arm-ffa-uclass.c).
Arm specific methods are implemented in the Arm driver (arm-ffa.c).

For more details please refer to the driver documentation [2].

[1]: https://developer.arm.com/documentation/den0077/latest/
[2]: doc/arch/arm64.ffa.rst

Signed-off-by: Abdellatif El Khlifi <abdellatif.elkhlifi@arm.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Cc: Tom Rini <trini@konsulko.com>
Cc: Jens Wiklander <jens.wiklander@linaro.org>
Cc: Heinrich Schuchardt <xypron.glpk@gmx.de>

Revert "Merge branch '2023-07-24-introduce-FF-A-suppport'"

This reverts commit d927d1a80843e1c3e2a3f0b8f6150790bef83da1, reversing
changes made to c07ad9520c6190070513016fdb495d4703a4a853.

These changes do not pass CI currently.

Signed-off-by: Tom Rini <trini@konsulko.com>

arm_ffa: introduce Arm FF-A support

Add Arm FF-A support implementing Arm Firmware Framework for Armv8-A v1.0

The Firmware Framework for Arm A-profile processors (FF-A v1.0) [1]
describes interfaces (ABIs) that standardize communication
between the Secure World and Normal World leveraging TrustZone
technology.

This driver uses 64-bit registers as per SMCCCv1.2 spec and comes
on top of the SMCCC layer. The driver provides the FF-A ABIs needed for
querying the FF-A framework from the secure world.

The driver uses SMC32 calling convention which means using the first
32-bit data of the Xn registers.

All supported ABIs come with their 32-bit version except FFA_RXTX_MAP
which has 64-bit version supported.

Both 32-bit and 64-bit direct messaging are supported which allows both
32-bit and 64-bit clients to use the FF-A bus.

FF-A is a discoverable bus and similar to architecture features.
FF-A bus is discovered using ARM_SMCCC_FEATURES mechanism performed
by the PSCI driver.

Clients are able to probe then use the FF-A bus by calling the DM class
searching APIs (e.g: uclass_first_device).

The Secure World is considered as one entity to communicate with
using the FF-A bus. FF-A communication is handled by one device and
one instance (the bus). This FF-A driver takes care of all the
interactions between Normal world and Secure World.

The driver exports its operations to be used by upper layers.

Exported operations:

- ffa_partition_info_get
- ffa_sync_send_receive
- ffa_rxtx_unmap

Generic FF-A methods are implemented in the Uclass (arm-ffa-uclass.c).
Arm specific methods are implemented in the Arm driver (arm-ffa.c).

For more details please refer to the driver documentation [2].

[1]: https://developer.arm.com/documentation/den0077/latest/
[2]: doc/arch/arm64.ffa.rst

Signed-off-by: Abdellatif El Khlifi <abdellatif.elkhlifi@arm.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Cc: Tom Rini <trini@konsulko.com>
Cc: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Cc: Jens Wiklander <jens.wiklander@linaro.org>
Cc: Heinrich Schuchardt <xypron.glpk@gmx.de>

arm_ffa: fix: remove deadcode in ffa_print_error_log()

address the CID 464361 Control flow issues [1]

[1]: https://lore.kernel.org/all/20230821210927.GL3953269@bill-the-cat/

Signed-off-by: Abdellatif El Khlifi <abdellatif.elkhlifi@arm.com>
Cc: Tom Rini <trini@konsulko.com>

arm_ffa: use debug logs

replace info logs with debug logs

Signed-off-by: Abdellatif El Khlifi <abdellatif.elkhlifi@arm.com>
Cc: Tom Rini <trini@konsulko.com>
Cc: Simon Glass <sjg@chromium.org>
Reviewed-by: Simon Glass <sjg@chromium.org>

arm_ffa: introduce Arm FF-A support

Add Arm FF-A support implementing Arm Firmware Framework for Armv8-A v1.0

The Firmware Framework for Arm A-profile processors (FF-A v1.0) [1]
describes interfaces (ABIs) that standardize communication
between the Secure World and Normal World leveraging TrustZone
technology.

This driver uses 64-bit registers as per SMCCCv1.2 spec and comes
on top of the SMCCC layer. The driver provides the FF-A ABIs needed for
querying the FF-A framework from the secure world.

The driver uses SMC32 calling convention which means using the first
32-bit data of the Xn registers.

All supported ABIs come with their 32-bit version except FFA_RXTX_MAP
which has 64-bit version supported.

Both 32-bit and 64-bit direct messaging are supported which allows both
32-bit and 64-bit clients to use the FF-A bus.

FF-A is a discoverable bus and similar to architecture features.
FF-A bus is discovered using ARM_SMCCC_FEATURES mechanism performed
by the PSCI driver.

Clients are able to probe then use the FF-A bus by calling the DM class
searching APIs (e.g: uclass_first_device).

The Secure World is considered as one entity to communicate with
using the FF-A bus. FF-A communication is handled by one device and
one instance (the bus). This FF-A driver takes care of all the
interactions between Normal world and Secure World.

The driver exports its operations to be used by upper layers.

Exported operations:

- ffa_partition_info_get
- ffa_sync_send_receive
- ffa_rxtx_unmap

Generic FF-A methods are implemented in the Uclass (arm-ffa-uclass.c).
Arm specific methods are implemented in the Arm driver (arm-ffa.c).

For more details please refer to the driver documentation [2].

[1]: https://developer.arm.com/documentation/den0077/latest/
[2]: doc/arch/arm64.ffa.rst

Signed-off-by: Abdellatif El Khlifi <abdellatif.elkhlifi@arm.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Cc: Tom Rini <trini@konsulko.com>
Cc: Jens Wiklander <jens.wiklander@linaro.org>
Cc: Heinrich Schuchardt <xypron.glpk@gmx.de>

Revert "Merge branch '2023-07-24-introduce-FF-A-suppport'"

This reverts commit d927d1a80843e1c3e2a3f0b8f6150790bef83da1, reversing
changes made to c07ad9520c6190070513016fdb495d4703a4a853.

These changes do not pass CI currently.

Signed-off-by: Tom Rini <trini@konsulko.com>

arm_ffa: introduce Arm FF-A support

Add Arm FF-A support implementing Arm Firmware Framework for Armv8-A v1.0

The Firmware Framework for Arm A-profile processors (FF-A v1.0) [1]
describes interfaces (ABIs) that standardize communication
between the Secure World and Normal World leveraging TrustZone
technology.

This driver uses 64-bit registers as per SMCCCv1.2 spec and comes
on top of the SMCCC layer. The driver provides the FF-A ABIs needed for
querying the FF-A framework from the secure world.

The driver uses SMC32 calling convention which means using the first
32-bit data of the Xn registers.

All supported ABIs come with their 32-bit version except FFA_RXTX_MAP
which has 64-bit version supported.

Both 32-bit and 64-bit direct messaging are supported which allows both
32-bit and 64-bit clients to use the FF-A bus.

FF-A is a discoverable bus and similar to architecture features.
FF-A bus is discovered using ARM_SMCCC_FEATURES mechanism performed
by the PSCI driver.

Clients are able to probe then use the FF-A bus by calling the DM class
searching APIs (e.g: uclass_first_device).

The Secure World is considered as one entity to communicate with
using the FF-A bus. FF-A communication is handled by one device and
one instance (the bus). This FF-A driver takes care of all the
interactions between Normal world and Secure World.

The driver exports its operations to be used by upper layers.

Exported operations:

- ffa_partition_info_get
- ffa_sync_send_receive
- ffa_rxtx_unmap

Generic FF-A methods are implemented in the Uclass (arm-ffa-uclass.c).
Arm specific methods are implemented in the Arm driver (arm-ffa.c).

For more details please refer to the driver documentation [2].

[1]: https://developer.arm.com/documentation/den0077/latest/
[2]: doc/arch/arm64.ffa.rst

Signed-off-by: Abdellatif El Khlifi <abdellatif.elkhlifi@arm.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Cc: Tom Rini <trini@konsulko.com>
Cc: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Cc: Jens Wiklander <jens.wiklander@linaro.org>
Cc: Heinrich Schuchardt <xypron.glpk@gmx.de>

arm_ffa: fix: remove deadcode in ffa_print_error_log()

address the CID 464361 Control flow issues [1]

[1]: https://lore.kernel.org/all/20230821210927.GL3953269@bill-the-cat/

Signed-off-by: Abdellatif El Khlifi <abdellatif.elkhlifi@arm.com>
Cc: Tom Rini <trini@konsulko.com>

arm_ffa: use debug logs

replace info logs with debug logs

Signed-off-by: Abdellatif El Khlifi <abdellatif.elkhlifi@arm.com>
Cc: Tom Rini <trini@konsulko.com>
Cc: Simon Glass <sjg@chromium.org>
Reviewed-by: Simon Glass <sjg@chromium.org>

arm_ffa: introduce Arm FF-A support

Add Arm FF-A support implementing Arm Firmware Framework for Armv8-A v1.0

The Firmware Framework for Arm A-profile processors (FF-A v1.0) [1]
describes interfaces (ABIs) that standardize communication
between the Secure World and Normal World leveraging TrustZone
technology.

This driver uses 64-bit registers as per SMCCCv1.2 spec and comes
on top of the SMCCC layer. The driver provides the FF-A ABIs needed for
querying the FF-A framework from the secure world.

The driver uses SMC32 calling convention which means using the first
32-bit data of the Xn registers.

All supported ABIs come with their 32-bit version except FFA_RXTX_MAP
which has 64-bit version supported.

Both 32-bit and 64-bit direct messaging are supported which allows both
32-bit and 64-bit clients to use the FF-A bus.

FF-A is a discoverable bus and similar to architecture features.
FF-A bus is discovered using ARM_SMCCC_FEATURES mechanism performed
by the PSCI driver.

Clients are able to probe then use the FF-A bus by calling the DM class
searching APIs (e.g: uclass_first_device).

The Secure World is considered as one entity to communicate with
using the FF-A bus. FF-A communication is handled by one device and
one instance (the bus). This FF-A driver takes care of all the
interactions between Normal world and Secure World.

The driver exports its operations to be used by upper layers.

Exported operations:

- ffa_partition_info_get
- ffa_sync_send_receive
- ffa_rxtx_unmap

Generic FF-A methods are implemented in the Uclass (arm-ffa-uclass.c).
Arm specific methods are implemented in the Arm driver (arm-ffa.c).

For more details please refer to the driver documentation [2].

[1]: https://developer.arm.com/documentation/den0077/latest/
[2]: doc/arch/arm64.ffa.rst

Signed-off-by: Abdellatif El Khlifi <abdellatif.elkhlifi@arm.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Cc: Tom Rini <trini@konsulko.com>
Cc: Jens Wiklander <jens.wiklander@linaro.org>
Cc: Heinrich Schuchardt <xypron.glpk@gmx.de>

Revert "Merge branch '2023-07-24-introduce-FF-A-suppport'"

This reverts commit d927d1a80843e1c3e2a3f0b8f6150790bef83da1, reversing
changes made to c07ad9520c6190070513016fdb495d4703a4a853.

These changes do not pass CI currently.

Signed-off-by: Tom Rini <trini@konsulko.com>

arm_ffa: introduce Arm FF-A support

Add Arm FF-A support implementing Arm Firmware Framework for Armv8-A v1.0

The Firmware Framework for Arm A-profile processors (FF-A v1.0) [1]
describes interfaces (ABIs) that standardize communication
between the Secure World and Normal World leveraging TrustZone
technology.

This driver uses 64-bit registers as per SMCCCv1.2 spec and comes
on top of the SMCCC layer. The driver provides the FF-A ABIs needed for
querying the FF-A framework from the secure world.

The driver uses SMC32 calling convention which means using the first
32-bit data of the Xn registers.

All supported ABIs come with their 32-bit version except FFA_RXTX_MAP
which has 64-bit version supported.

Both 32-bit and 64-bit direct messaging are supported which allows both
32-bit and 64-bit clients to use the FF-A bus.

FF-A is a discoverable bus and similar to architecture features.
FF-A bus is discovered using ARM_SMCCC_FEATURES mechanism performed
by the PSCI driver.

Clients are able to probe then use the FF-A bus by calling the DM class
searching APIs (e.g: uclass_first_device).

The Secure World is considered as one entity to communicate with
using the FF-A bus. FF-A communication is handled by one device and
one instance (the bus). This FF-A driver takes care of all the
interactions between Normal world and Secure World.

The driver exports its operations to be used by upper layers.

Exported operations:

- ffa_partition_info_get
- ffa_sync_send_receive
- ffa_rxtx_unmap

Generic FF-A methods are implemented in the Uclass (arm-ffa-uclass.c).
Arm specific methods are implemented in the Arm driver (arm-ffa.c).

For more details please refer to the driver documentation [2].

[1]: https://developer.arm.com/documentation/den0077/latest/
[2]: doc/arch/arm64.ffa.rst

Signed-off-by: Abdellatif El Khlifi <abdellatif.elkhlifi@arm.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Cc: Tom Rini <trini@konsulko.com>
Cc: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Cc: Jens Wiklander <jens.wiklander@linaro.org>
Cc: Heinrich Schuchardt <xypron.glpk@gmx.de>

arm_ffa: fix: remove deadcode in ffa_print_error_log()

address the CID 464361 Control flow issues [1]

[1]: https://lore.kernel.org/all/20230821210927.GL3953269@bill-the-cat/

Signed-off-by: Abdellatif El Khlifi <abdellatif.elkhlifi@arm.com>
Cc: Tom Rini <trini@konsulko.com>

arm_ffa: use debug logs

replace info logs with debug logs

Signed-off-by: Abdellatif El Khlifi <abdellatif.elkhlifi@arm.com>
Cc: Tom Rini <trini@konsulko.com>
Cc: Simon Glass <sjg@chromium.org>
Reviewed-by: Simon Glass <sjg@chromium.org>

arm_ffa: introduce Arm FF-A support

Add Arm FF-A support implementing Arm Firmware Framework for Armv8-A v1.0

The Firmware Framework for Arm A-profile processors (FF-A v1.0) [1]
describes interfaces (ABIs) that standardize communication
between the Secure World and Normal World leveraging TrustZone
technology.

This driver uses 64-bit registers as per SMCCCv1.2 spec and comes
on top of the SMCCC layer. The driver provides the FF-A ABIs needed for
querying the FF-A framework from the secure world.

The driver uses SMC32 calling convention which means using the first
32-bit data of the Xn registers.

All supported ABIs come with their 32-bit version except FFA_RXTX_MAP
which has 64-bit version supported.

Both 32-bit and 64-bit direct messaging are supported which allows both
32-bit and 64-bit clients to use the FF-A bus.

FF-A is a discoverable bus and similar to architecture features.
FF-A bus is discovered using ARM_SMCCC_FEATURES mechanism performed
by the PSCI driver.

Clients are able to probe then use the FF-A bus by calling the DM class
searching APIs (e.g: uclass_first_device).

The Secure World is considered as one entity to communicate with
using the FF-A bus. FF-A communication is handled by one device and
one instance (the bus). This FF-A driver takes care of all the
interactions between Normal world and Secure World.

The driver exports its operations to be used by upper layers.

Exported operations:

- ffa_partition_info_get
- ffa_sync_send_receive
- ffa_rxtx_unmap

Generic FF-A methods are implemented in the Uclass (arm-ffa-uclass.c).
Arm specific methods are implemented in the Arm driver (arm-ffa.c).

For more details please refer to the driver documentation [2].

[1]: https://developer.arm.com/documentation/den0077/latest/
[2]: doc/arch/arm64.ffa.rst

Signed-off-by: Abdellatif El Khlifi <abdellatif.elkhlifi@arm.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Cc: Tom Rini <trini@konsulko.com>
Cc: Jens Wiklander <jens.wiklander@linaro.org>
Cc: Heinrich Schuchardt <xypron.glpk@gmx.de>

Revert "Merge branch '2023-07-24-introduce-FF-A-suppport'"

This reverts commit d927d1a80843e1c3e2a3f0b8f6150790bef83da1, reversing
changes made to c07ad9520c6190070513016fdb495d4703a4a853.

These changes do not pass CI currently.

Signed-off-by: Tom Rini <trini@konsulko.com>

arm_ffa: introduce Arm FF-A support

Add Arm FF-A support implementing Arm Firmware Framework for Armv8-A v1.0

The Firmware Framework for Arm A-profile processors (FF-A v1.0) [1]
describes interfaces (ABIs) that standardize communication
between the Secure World and Normal World leveraging TrustZone
technology.

This driver uses 64-bit registers as per SMCCCv1.2 spec and comes
on top of the SMCCC layer. The driver provides the FF-A ABIs needed for
querying the FF-A framework from the secure world.

The driver uses SMC32 calling convention which means using the first
32-bit data of the Xn registers.

All supported ABIs come with their 32-bit version except FFA_RXTX_MAP
which has 64-bit version supported.

Both 32-bit and 64-bit direct messaging are supported which allows both
32-bit and 64-bit clients to use the FF-A bus.

FF-A is a discoverable bus and similar to architecture features.
FF-A bus is discovered using ARM_SMCCC_FEATURES mechanism performed
by the PSCI driver.

Clients are able to probe then use the FF-A bus by calling the DM class
searching APIs (e.g: uclass_first_device).

The Secure World is considered as one entity to communicate with
using the FF-A bus. FF-A communication is handled by one device and
one instance (the bus). This FF-A driver takes care of all the
interactions between Normal world and Secure World.

The driver exports its operations to be used by upper layers.

Exported operations:

- ffa_partition_info_get
- ffa_sync_send_receive
- ffa_rxtx_unmap

Generic FF-A methods are implemented in the Uclass (arm-ffa-uclass.c).
Arm specific methods are implemented in the Arm driver (arm-ffa.c).

For more details please refer to the driver documentation [2].

[1]: https://developer.arm.com/documentation/den0077/latest/
[2]: doc/arch/arm64.ffa.rst

Signed-off-by: Abdellatif El Khlifi <abdellatif.elkhlifi@arm.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Cc: Tom Rini <trini@konsulko.com>
Cc: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Cc: Jens Wiklander <jens.wiklander@linaro.org>
Cc: Heinrich Schuchardt <xypron.glpk@gmx.de>

arm_ffa: fix: remove deadcode in ffa_print_error_log()

address the CID 464361 Control flow issues [1]

[1]: https://lore.kernel.org/all/20230821210927.GL3953269@bill-the-cat/

Signed-off-by: Abdellatif El Khlifi <abdellatif.elkhlifi@arm.com>
Cc: Tom Rini <trini@konsulko.com>

arm_ffa: use debug logs

replace info logs with debug logs

Signed-off-by: Abdellatif El Khlifi <abdellatif.elkhlifi@arm.com>
Cc: Tom Rini <trini@konsulko.com>
Cc: Simon Glass <sjg@chromium.org>
Reviewed-by: Simon Glass <sjg@chromium.org>

arm_ffa: introduce Arm FF-A support

Add Arm FF-A support implementing Arm Firmware Framework for Armv8-A v1.0

The Firmware Framework for Arm A-profile processors (FF-A v1.0) [1]
describes interfaces (ABIs) that standardize communication
between the Secure World and Normal World leveraging TrustZone
technology.

This driver uses 64-bit registers as per SMCCCv1.2 spec and comes
on top of the SMCCC layer. The driver provides the FF-A ABIs needed for
querying the FF-A framework from the secure world.

The driver uses SMC32 calling convention which means using the first
32-bit data of the Xn registers.

All supported ABIs come with their 32-bit version except FFA_RXTX_MAP
which has 64-bit version supported.

Both 32-bit and 64-bit direct messaging are supported which allows both
32-bit and 64-bit clients to use the FF-A bus.

FF-A is a discoverable bus and similar to architecture features.
FF-A bus is discovered using ARM_SMCCC_FEATURES mechanism performed
by the PSCI driver.

Clients are able to probe then use the FF-A bus by calling the DM class
searching APIs (e.g: uclass_first_device).

The Secure World is considered as one entity to communicate with
using the FF-A bus. FF-A communication is handled by one device and
one instance (the bus). This FF-A driver takes care of all the
interactions between Normal world and Secure World.

The driver exports its operations to be used by upper layers.

Exported operations:

- ffa_partition_info_get
- ffa_sync_send_receive
- ffa_rxtx_unmap

Generic FF-A methods are implemented in the Uclass (arm-ffa-uclass.c).
Arm specific methods are implemented in the Arm driver (arm-ffa.c).

For more details please refer to the driver documentation [2].

[1]: https://developer.arm.com/documentation/den0077/latest/
[2]: doc/arch/arm64.ffa.rst

Signed-off-by: Abdellatif El Khlifi <abdellatif.elkhlifi@arm.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Cc: Tom Rini <trini@konsulko.com>
Cc: Jens Wiklander <jens.wiklander@linaro.org>
Cc: Heinrich Schuchardt <xypron.glpk@gmx.de>

Revert "Merge branch '2023-07-24-introduce-FF-A-suppport'"

This reverts commit d927d1a80843e1c3e2a3f0b8f6150790bef83da1, reversing
changes made to c07ad9520c6190070513016fdb495d4703a4a853.

These changes do not pass CI currently.

Signed-off-by: Tom Rini <trini@konsulko.com>

arm_ffa: introduce Arm FF-A support

Add Arm FF-A support implementing Arm Firmware Framework for Armv8-A v1.0

The Firmware Framework for Arm A-profile processors (FF-A v1.0) [1]
describes interfaces (ABIs) that standardize communication
between the Secure World and Normal World leveraging TrustZone
technology.

This driver uses 64-bit registers as per SMCCCv1.2 spec and comes
on top of the SMCCC layer. The driver provides the FF-A ABIs needed for
querying the FF-A framework from the secure world.

The driver uses SMC32 calling convention which means using the first
32-bit data of the Xn registers.

All supported ABIs come with their 32-bit version except FFA_RXTX_MAP
which has 64-bit version supported.

Both 32-bit and 64-bit direct messaging are supported which allows both
32-bit and 64-bit clients to use the FF-A bus.

FF-A is a discoverable bus and similar to architecture features.
FF-A bus is discovered using ARM_SMCCC_FEATURES mechanism performed
by the PSCI driver.

Clients are able to probe then use the FF-A bus by calling the DM class
searching APIs (e.g: uclass_first_device).

The Secure World is considered as one entity to communicate with
using the FF-A bus. FF-A communication is handled by one device and
one instance (the bus). This FF-A driver takes care of all the
interactions between Normal world and Secure World.

The driver exports its operations to be used by upper layers.

Exported operations:

- ffa_partition_info_get
- ffa_sync_send_receive
- ffa_rxtx_unmap

Generic FF-A methods are implemented in the Uclass (arm-ffa-uclass.c).
Arm specific methods are implemented in the Arm driver (arm-ffa.c).

For more details please refer to the driver documentation [2].

[1]: https://developer.arm.com/documentation/den0077/latest/
[2]: doc/arch/arm64.ffa.rst

Signed-off-by: Abdellatif El Khlifi <abdellatif.elkhlifi@arm.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Cc: Tom Rini <trini@konsulko.com>
Cc: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Cc: Jens Wiklander <jens.wiklander@linaro.org>
Cc: Heinrich Schuchardt <xypron.glpk@gmx.de>

arm_ffa: fix: remove deadcode in ffa_print_error_log()

address the CID 464361 Control flow issues [1]

[1]: https://lore.kernel.org/all/20230821210927.GL3953269@bill-the-cat/

Signed-off-by: Abdellatif El Khlifi <abdellatif.elkhlifi@arm.com>
Cc: Tom Rini <trini@konsulko.com>

arm_ffa: use debug logs

replace info logs with debug logs

Signed-off-by: Abdellatif El Khlifi <abdellatif.elkhlifi@arm.com>
Cc: Tom Rini <trini@konsulko.com>
Cc: Simon Glass <sjg@chromium.org>
Reviewed-by: Simon Glass <sjg@chromium.org>

arm_ffa: introduce Arm FF-A support

Add Arm FF-A support implementing Arm Firmware Framework for Armv8-A v1.0

The Firmware Framework for Arm A-profile processors (FF-A v1.0) [1]
describes interfaces (ABIs) that standardize communication
between the Secure World and Normal World leveraging TrustZone
technology.

This driver uses 64-bit registers as per SMCCCv1.2 spec and comes
on top of the SMCCC layer. The driver provides the FF-A ABIs needed for
querying the FF-A framework from the secure world.

The driver uses SMC32 calling convention which means using the first
32-bit data of the Xn registers.

All supported ABIs come with their 32-bit version except FFA_RXTX_MAP
which has 64-bit version supported.

Both 32-bit and 64-bit direct messaging are supported which allows both
32-bit and 64-bit clients to use the FF-A bus.

FF-A is a discoverable bus and similar to architecture features.
FF-A bus is discovered using ARM_SMCCC_FEATURES mechanism performed
by the PSCI driver.

Clients are able to probe then use the FF-A bus by calling the DM class
searching APIs (e.g: uclass_first_device).

The Secure World is considered as one entity to communicate with
using the FF-A bus. FF-A communication is handled by one device and
one instance (the bus). This FF-A driver takes care of all the
interactions between Normal world and Secure World.

The driver exports its operations to be used by upper layers.

Exported operations:

- ffa_partition_info_get
- ffa_sync_send_receive
- ffa_rxtx_unmap

Generic FF-A methods are implemented in the Uclass (arm-ffa-uclass.c).
Arm specific methods are implemented in the Arm driver (arm-ffa.c).

For more details please refer to the driver documentation [2].

[1]: https://developer.arm.com/documentation/den0077/latest/
[2]: doc/arch/arm64.ffa.rst

Signed-off-by: Abdellatif El Khlifi <abdellatif.elkhlifi@arm.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Cc: Tom Rini <trini@konsulko.com>
Cc: Jens Wiklander <jens.wiklander@linaro.org>
Cc: Heinrich Schuchardt <xypron.glpk@gmx.de>

Revert "Merge branch '2023-07-24-introduce-FF-A-suppport'"

This reverts commit d927d1a80843e1c3e2a3f0b8f6150790bef83da1, reversing
changes made to c07ad9520c6190070513016fdb495d4703a4a853.

These changes do not pass CI currently.

Signed-off-by: Tom Rini <trini@konsulko.com>

arm_ffa: introduce Arm FF-A support

Add Arm FF-A support implementing Arm Firmware Framework for Armv8-A v1.0

The Firmware Framework for Arm A-profile processors (FF-A v1.0) [1]
describes interfaces (ABIs) that standardize communication
between the Secure World and Normal World leveraging TrustZone
technology.

This driver uses 64-bit registers as per SMCCCv1.2 spec and comes
on top of the SMCCC layer. The driver provides the FF-A ABIs needed for
querying the FF-A framework from the secure world.

The driver uses SMC32 calling convention which means using the first
32-bit data of the Xn registers.

All supported ABIs come with their 32-bit version except FFA_RXTX_MAP
which has 64-bit version supported.

Both 32-bit and 64-bit direct messaging are supported which allows both
32-bit and 64-bit clients to use the FF-A bus.

FF-A is a discoverable bus and similar to architecture features.
FF-A bus is discovered using ARM_SMCCC_FEATURES mechanism performed
by the PSCI driver.

Clients are able to probe then use the FF-A bus by calling the DM class
searching APIs (e.g: uclass_first_device).

The Secure World is considered as one entity to communicate with
using the FF-A bus. FF-A communication is handled by one device and
one instance (the bus). This FF-A driver takes care of all the
interactions between Normal world and Secure World.

The driver exports its operations to be used by upper layers.

Exported operations:

- ffa_partition_info_get
- ffa_sync_send_receive
- ffa_rxtx_unmap

Generic FF-A methods are implemented in the Uclass (arm-ffa-uclass.c).
Arm specific methods are implemented in the Arm driver (arm-ffa.c).

For more details please refer to the driver documentation [2].

[1]: https://developer.arm.com/documentation/den0077/latest/
[2]: doc/arch/arm64.ffa.rst

Signed-off-by: Abdellatif El Khlifi <abdellatif.elkhlifi@arm.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Cc: Tom Rini <trini@konsulko.com>
Cc: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Cc: Jens Wiklander <jens.wiklander@linaro.org>
Cc: Heinrich Schuchardt <xypron.glpk@gmx.de>

arm_ffa: fix: remove deadcode in ffa_print_error_log()

address the CID 464361 Control flow issues [1]

[1]: https://lore.kernel.org/all/20230821210927.GL3953269@bill-the-cat/

Signed-off-by: Abdellatif El Khlifi <abdellatif.elkhlifi@arm.com>
Cc: Tom Rini <trini@konsulko.com>

arm_ffa: use debug logs

replace info logs with debug logs

Signed-off-by: Abdellatif El Khlifi <abdellatif.elkhlifi@arm.com>
Cc: Tom Rini <trini@konsulko.com>
Cc: Simon Glass <sjg@chromium.org>
Reviewed-by: Simon Glass <sjg@chromium.org>

arm_ffa: introduce Arm FF-A support

Add Arm FF-A support implementing Arm Firmware Framework for Armv8-A v1.0

The Firmware Framework for Arm A-profile processors (FF-A v1.0) [1]
describes interfaces (ABIs) that standardize communication
between the Secure World and Normal World leveraging TrustZone
technology.

This driver uses 64-bit registers as per SMCCCv1.2 spec and comes
on top of the SMCCC layer. The driver provides the FF-A ABIs needed for
querying the FF-A framework from the secure world.

The driver uses SMC32 calling convention which means using the first
32-bit data of the Xn registers.

All supported ABIs come with their 32-bit version except FFA_RXTX_MAP
which has 64-bit version supported.

Both 32-bit and 64-bit direct messaging are supported which allows both
32-bit and 64-bit clients to use the FF-A bus.

FF-A is a discoverable bus and similar to architecture features.
FF-A bus is discovered using ARM_SMCCC_FEATURES mechanism performed
by the PSCI driver.

Clients are able to probe then use the FF-A bus by calling the DM class
searching APIs (e.g: uclass_first_device).

The Secure World is considered as one entity to communicate with
using the FF-A bus. FF-A communication is handled by one device and
one instance (the bus). This FF-A driver takes care of all the
interactions between Normal world and Secure World.

The driver exports its operations to be used by upper layers.

Exported operations:

- ffa_partition_info_get
- ffa_sync_send_receive
- ffa_rxtx_unmap

Generic FF-A methods are implemented in the Uclass (arm-ffa-uclass.c).
Arm specific methods are implemented in the Arm driver (arm-ffa.c).

For more details please refer to the driver documentation [2].

[1]: https://developer.arm.com/documentation/den0077/latest/
[2]: doc/arch/arm64.ffa.rst

Signed-off-by: Abdellatif El Khlifi <abdellatif.elkhlifi@arm.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Cc: Tom Rini <trini@konsulko.com>
Cc: Jens Wiklander <jens.wiklander@linaro.org>
Cc: Heinrich Schuchardt <xypron.glpk@gmx.de>

Revert "Merge branch '2023-07-24-introduce-FF-A-suppport'"

This reverts commit d927d1a80843e1c3e2a3f0b8f6150790bef83da1, reversing
changes made to c07ad9520c6190070513016fdb495d4703a4a853.

These changes do not pass CI currently.

Signed-off-by: Tom Rini <trini@konsulko.com>

arm_ffa: introduce Arm FF-A support

Add Arm FF-A support implementing Arm Firmware Framework for Armv8-A v1.0

The Firmware Framework for Arm A-profile processors (FF-A v1.0) [1]
describes interfaces (ABIs) that standardize communication
between the Secure World and Normal World leveraging TrustZone
technology.

This driver uses 64-bit registers as per SMCCCv1.2 spec and comes
on top of the SMCCC layer. The driver provides the FF-A ABIs needed for
querying the FF-A framework from the secure world.

The driver uses SMC32 calling convention which means using the first
32-bit data of the Xn registers.

All supported ABIs come with their 32-bit version except FFA_RXTX_MAP
which has 64-bit version supported.

Both 32-bit and 64-bit direct messaging are supported which allows both
32-bit and 64-bit clients to use the FF-A bus.

FF-A is a discoverable bus and similar to architecture features.
FF-A bus is discovered using ARM_SMCCC_FEATURES mechanism performed
by the PSCI driver.

Clients are able to probe then use the FF-A bus by calling the DM class
searching APIs (e.g: uclass_first_device).

The Secure World is considered as one entity to communicate with
using the FF-A bus. FF-A communication is handled by one device and
one instance (the bus). This FF-A driver takes care of all the
interactions between Normal world and Secure World.

The driver exports its operations to be used by upper layers.

Exported operations:

- ffa_partition_info_get
- ffa_sync_send_receive
- ffa_rxtx_unmap

Generic FF-A methods are implemented in the Uclass (arm-ffa-uclass.c).
Arm specific methods are implemented in the Arm driver (arm-ffa.c).

For more details please refer to the driver documentation [2].

[1]: https://developer.arm.com/documentation/den0077/latest/
[2]: doc/arch/arm64.ffa.rst

Signed-off-by: Abdellatif El Khlifi <abdellatif.elkhlifi@arm.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Cc: Tom Rini <trini@konsulko.com>
Cc: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Cc: Jens Wiklander <jens.wiklander@linaro.org>
Cc: Heinrich Schuchardt <xypron.glpk@gmx.de>

arm_ffa: fix: remove deadcode in ffa_print_error_log()

address the CID 464361 Control flow issues [1]

[1]: https://lore.kernel.org/all/20230821210927.GL3953269@bill-the-cat/

Signed-off-by: Abdellatif El Khlifi <abdellatif.elkhlifi@arm.com>
Cc: Tom Rini <trini@konsulko.com>

arm_ffa: use debug logs

replace info logs with debug logs

Signed-off-by: Abdellatif El Khlifi <abdellatif.elkhlifi@arm.com>
Cc: Tom Rini <trini@konsulko.com>
Cc: Simon Glass <sjg@chromium.org>
Reviewed-by: Simon Glass <sjg@chromium.org>

arm_ffa: introduce Arm FF-A support

Add Arm FF-A support implementing Arm Firmware Framework for Armv8-A v1.0

The Firmware Framework for Arm A-profile processors (FF-A v1.0) [1]
describes interfaces (ABIs) that standardize communication
between the Secure World and Normal World leveraging TrustZone
technology.

This driver uses 64-bit registers as per SMCCCv1.2 spec and comes
on top of the SMCCC layer. The driver provides the FF-A ABIs needed for
querying the FF-A framework from the secure world.

The driver uses SMC32 calling convention which means using the first
32-bit data of the Xn registers.

All supported ABIs come with their 32-bit version except FFA_RXTX_MAP
which has 64-bit version supported.

Both 32-bit and 64-bit direct messaging are supported which allows both
32-bit and 64-bit clients to use the FF-A bus.

FF-A is a discoverable bus and similar to architecture features.
FF-A bus is discovered using ARM_SMCCC_FEATURES mechanism performed
by the PSCI driver.

Clients are able to probe then use the FF-A bus by calling the DM class
searching APIs (e.g: uclass_first_device).

The Secure World is considered as one entity to communicate with
using the FF-A bus. FF-A communication is handled by one device and
one instance (the bus). This FF-A driver takes care of all the
interactions between Normal world and Secure World.

The driver exports its operations to be used by upper layers.

Exported operations:

- ffa_partition_info_get
- ffa_sync_send_receive
- ffa_rxtx_unmap

Generic FF-A methods are implemented in the Uclass (arm-ffa-uclass.c).
Arm specific methods are implemented in the Arm driver (arm-ffa.c).

For more details please refer to the driver documentation [2].

[1]: https://developer.arm.com/documentation/den0077/latest/
[2]: doc/arch/arm64.ffa.rst

Signed-off-by: Abdellatif El Khlifi <abdellatif.elkhlifi@arm.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Cc: Tom Rini <trini@konsulko.com>
Cc: Jens Wiklander <jens.wiklander@linaro.org>
Cc: Heinrich Schuchardt <xypron.glpk@gmx.de>

Revert "Merge branch '2023-07-24-introduce-FF-A-suppport'"

This reverts commit d927d1a80843e1c3e2a3f0b8f6150790bef83da1, reversing
changes made to c07ad9520c6190070513016fdb495d4703a4a853.

These changes do not pass CI currently.

Signed-off-by: Tom Rini <trini@konsulko.com>

arm_ffa: introduce Arm FF-A support

Add Arm FF-A support implementing Arm Firmware Framework for Armv8-A v1.0

The Firmware Framework for Arm A-profile processors (FF-A v1.0) [1]
describes interfaces (ABIs) that standardize communication
between the Secure World and Normal World leveraging TrustZone
technology.

This driver uses 64-bit registers as per SMCCCv1.2 spec and comes
on top of the SMCCC layer. The driver provides the FF-A ABIs needed for
querying the FF-A framework from the secure world.

The driver uses SMC32 calling convention which means using the first
32-bit data of the Xn registers.

All supported ABIs come with their 32-bit version except FFA_RXTX_MAP
which has 64-bit version supported.

Both 32-bit and 64-bit direct messaging are supported which allows both
32-bit and 64-bit clients to use the FF-A bus.

FF-A is a discoverable bus and similar to architecture features.
FF-A bus is discovered using ARM_SMCCC_FEATURES mechanism performed
by the PSCI driver.

Clients are able to probe then use the FF-A bus by calling the DM class
searching APIs (e.g: uclass_first_device).

The Secure World is considered as one entity to communicate with
using the FF-A bus. FF-A communication is handled by one device and
one instance (the bus). This FF-A driver takes care of all the
interactions between Normal world and Secure World.

The driver exports its operations to be used by upper layers.

Exported operations:

- ffa_partition_info_get
- ffa_sync_send_receive
- ffa_rxtx_unmap

Generic FF-A methods are implemented in the Uclass (arm-ffa-uclass.c).
Arm specific methods are implemented in the Arm driver (arm-ffa.c).

For more details please refer to the driver documentation [2].

[1]: https://developer.arm.com/documentation/den0077/latest/
[2]: doc/arch/arm64.ffa.rst

Signed-off-by: Abdellatif El Khlifi <abdellatif.elkhlifi@arm.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Cc: Tom Rini <trini@konsulko.com>
Cc: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Cc: Jens Wiklander <jens.wiklander@linaro.org>
Cc: Heinrich Schuchardt <xypron.glpk@gmx.de>

arm_ffa: fix: remove deadcode in ffa_print_error_log()

address the CID 464361 Control flow issues [1]

[1]: https://lore.kernel.org/all/20230821210927.GL3953269@bill-the-cat/

Signed-off-by: Abdellatif El Khlifi <abdellatif.elkhlifi@arm.com>
Cc: Tom Rini <trini@konsulko.com>

arm_ffa: use debug logs

replace info logs with debug logs

Signed-off-by: Abdellatif El Khlifi <abdellatif.elkhlifi@arm.com>
Cc: Tom Rini <trini@konsulko.com>
Cc: Simon Glass <sjg@chromium.org>
Reviewed-by: Simon Glass <sjg@chromium.org>

arm_ffa: introduce Arm FF-A support

Add Arm FF-A support implementing Arm Firmware Framework for Armv8-A v1.0

The Firmware Framework for Arm A-profile processors (FF-A v1.0) [1]
describes interfaces (ABIs) that standardize communication
between the Secure World and Normal World leveraging TrustZone
technology.

This driver uses 64-bit registers as per SMCCCv1.2 spec and comes
on top of the SMCCC layer. The driver provides the FF-A ABIs needed for
querying the FF-A framework from the secure world.

The driver uses SMC32 calling convention which means using the first
32-bit data of the Xn registers.

All supported ABIs come with their 32-bit version except FFA_RXTX_MAP
which has 64-bit version supported.

Both 32-bit and 64-bit direct messaging are supported which allows both
32-bit and 64-bit clients to use the FF-A bus.

FF-A is a discoverable bus and similar to architecture features.
FF-A bus is discovered using ARM_SMCCC_FEATURES mechanism performed
by the PSCI driver.

Clients are able to probe then use the FF-A bus by calling the DM class
searching APIs (e.g: uclass_first_device).

The Secure World is considered as one entity to communicate with
using the FF-A bus. FF-A communication is handled by one device and
one instance (the bus). This FF-A driver takes care of all the
interactions between Normal world and Secure World.

The driver exports its operations to be used by upper layers.

Exported operations:

- ffa_partition_info_get
- ffa_sync_send_receive
- ffa_rxtx_unmap

Generic FF-A methods are implemented in the Uclass (arm-ffa-uclass.c).
Arm specific methods are implemented in the Arm driver (arm-ffa.c).

For more details please refer to the driver documentation [2].

[1]: https://developer.arm.com/documentation/den0077/latest/
[2]: doc/arch/arm64.ffa.rst

Signed-off-by: Abdellatif El Khlifi <abdellatif.elkhlifi@arm.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Cc: Tom Rini <trini@konsulko.com>
Cc: Jens Wiklander <jens.wiklander@linaro.org>
Cc: Heinrich Schuchardt <xypron.glpk@gmx.de>

Revert "Merge branch '2023-07-24-introduce-FF-A-suppport'"

This reverts commit d927d1a80843e1c3e2a3f0b8f6150790bef83da1, reversing
changes made to c07ad9520c6190070513016fdb495d4703a4a853.

These changes do not pass CI currently.

Signed-off-by: Tom Rini <trini@konsulko.com>

arm_ffa: introduce Arm FF-A support

Add Arm FF-A support implementing Arm Firmware Framework for Armv8-A v1.0

The Firmware Framework for Arm A-profile processors (FF-A v1.0) [1]
describes interfaces (ABIs) that standardize communication
between the Secure World and Normal World leveraging TrustZone
technology.

This driver uses 64-bit registers as per SMCCCv1.2 spec and comes
on top of the SMCCC layer. The driver provides the FF-A ABIs needed for
querying the FF-A framework from the secure world.

The driver uses SMC32 calling convention which means using the first
32-bit data of the Xn registers.

All supported ABIs come with their 32-bit version except FFA_RXTX_MAP
which has 64-bit version supported.

Both 32-bit and 64-bit direct messaging are supported which allows both
32-bit and 64-bit clients to use the FF-A bus.

FF-A is a discoverable bus and similar to architecture features.
FF-A bus is discovered using ARM_SMCCC_FEATURES mechanism performed
by the PSCI driver.

Clients are able to probe then use the FF-A bus by calling the DM class
searching APIs (e.g: uclass_first_device).

The Secure World is considered as one entity to communicate with
using the FF-A bus. FF-A communication is handled by one device and
one instance (the bus). This FF-A driver takes care of all the
interactions between Normal world and Secure World.

The driver exports its operations to be used by upper layers.

Exported operations:

- ffa_partition_info_get
- ffa_sync_send_receive
- ffa_rxtx_unmap

Generic FF-A methods are implemented in the Uclass (arm-ffa-uclass.c).
Arm specific methods are implemented in the Arm driver (arm-ffa.c).

For more details please refer to the driver documentation [2].

[1]: https://developer.arm.com/documentation/den0077/latest/
[2]: doc/arch/arm64.ffa.rst

Signed-off-by: Abdellatif El Khlifi <abdellatif.elkhlifi@arm.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Cc: Tom Rini <trini@konsulko.com>
Cc: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Cc: Jens Wiklander <jens.wiklander@linaro.org>
Cc: Heinrich Schuchardt <xypron.glpk@gmx.de>

arm_ffa: fix: remove deadcode in ffa_print_error_log()

address the CID 464361 Control flow issues [1]

[1]: https://lore.kernel.org/all/20230821210927.GL3953269@bill-the-cat/

Signed-off-by: Abdellatif El Khlifi <abdellatif.elkhlifi@arm.com>
Cc: Tom Rini <trini@konsulko.com>

arm_ffa: use debug logs

replace info logs with debug logs

Signed-off-by: Abdellatif El Khlifi <abdellatif.elkhlifi@arm.com>
Cc: Tom Rini <trini@konsulko.com>
Cc: Simon Glass <sjg@chromium.org>
Reviewed-by: Simon Glass <sjg@chromium.org>

arm_ffa: introduce Arm FF-A support

Add Arm FF-A support implementing Arm Firmware Framework for Armv8-A v1.0

The Firmware Framework for Arm A-profile processors (FF-A v1.0) [1]
describes interfaces (ABIs) that standardize communication
between the Secure World and Normal World leveraging TrustZone
technology.

This driver uses 64-bit registers as per SMCCCv1.2 spec and comes
on top of the SMCCC layer. The driver provides the FF-A ABIs needed for
querying the FF-A framework from the secure world.

The driver uses SMC32 calling convention which means using the first
32-bit data of the Xn registers.

All supported ABIs come with their 32-bit version except FFA_RXTX_MAP
which has 64-bit version supported.

Both 32-bit and 64-bit direct messaging are supported which allows both
32-bit and 64-bit clients to use the FF-A bus.

FF-A is a discoverable bus and similar to architecture features.
FF-A bus is discovered using ARM_SMCCC_FEATURES mechanism performed
by the PSCI driver.

Clients are able to probe then use the FF-A bus by calling the DM class
searching APIs (e.g: uclass_first_device).

The Secure World is considered as one entity to communicate with
using the FF-A bus. FF-A communication is handled by one device and
one instance (the bus). This FF-A driver takes care of all the
interactions between Normal world and Secure World.

The driver exports its operations to be used by upper layers.

Exported operations:

- ffa_partition_info_get
- ffa_sync_send_receive
- ffa_rxtx_unmap

Generic FF-A methods are implemented in the Uclass (arm-ffa-uclass.c).
Arm specific methods are implemented in the Arm driver (arm-ffa.c).

For more details please refer to the driver documentation [2].

[1]: https://developer.arm.com/documentation/den0077/latest/
[2]: doc/arch/arm64.ffa.rst

Signed-off-by: Abdellatif El Khlifi <abdellatif.elkhlifi@arm.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Cc: Tom Rini <trini@konsulko.com>
Cc: Jens Wiklander <jens.wiklander@linaro.org>
Cc: Heinrich Schuchardt <xypron.glpk@gmx.de>

Revert "Merge branch '2023-07-24-introduce-FF-A-suppport'"

This reverts commit d927d1a80843e1c3e2a3f0b8f6150790bef83da1, reversing
changes made to c07ad9520c6190070513016fdb495d4703a4a853.

These changes do not pass CI currently.

Signed-off-by: Tom Rini <trini@konsulko.com>

arm_ffa: introduce Arm FF-A support

Add Arm FF-A support implementing Arm Firmware Framework for Armv8-A v1.0

The Firmware Framework for Arm A-profile processors (FF-A v1.0) [1]
describes interfaces (ABIs) that standardize communication
between the Secure World and Normal World leveraging TrustZone
technology.

This driver uses 64-bit registers as per SMCCCv1.2 spec and comes
on top of the SMCCC layer. The driver provides the FF-A ABIs needed for
querying the FF-A framework from the secure world.

The driver uses SMC32 calling convention which means using the first
32-bit data of the Xn registers.

All supported ABIs come with their 32-bit version except FFA_RXTX_MAP
which has 64-bit version supported.

Both 32-bit and 64-bit direct messaging are supported which allows both
32-bit and 64-bit clients to use the FF-A bus.

FF-A is a discoverable bus and similar to architecture features.
FF-A bus is discovered using ARM_SMCCC_FEATURES mechanism performed
by the PSCI driver.

Clients are able to probe then use the FF-A bus by calling the DM class
searching APIs (e.g: uclass_first_device).

The Secure World is considered as one entity to communicate with
using the FF-A bus. FF-A communication is handled by one device and
one instance (the bus). This FF-A driver takes care of all the
interactions between Normal world and Secure World.

The driver exports its operations to be used by upper layers.

Exported operations:

- ffa_partition_info_get
- ffa_sync_send_receive
- ffa_rxtx_unmap

Generic FF-A methods are implemented in the Uclass (arm-ffa-uclass.c).
Arm specific methods are implemented in the Arm driver (arm-ffa.c).

For more details please refer to the driver documentation [2].

[1]: https://developer.arm.com/documentation/den0077/latest/
[2]: doc/arch/arm64.ffa.rst

Signed-off-by: Abdellatif El Khlifi <abdellatif.elkhlifi@arm.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Cc: Tom Rini <trini@konsulko.com>
Cc: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Cc: Jens Wiklander <jens.wiklander@linaro.org>
Cc: Heinrich Schuchardt <xypron.glpk@gmx.de>

arm_ffa: fix: remove deadcode in ffa_print_error_log()

address the CID 464361 Control flow issues [1]

[1]: https://lore.kernel.org/all/20230821210927.GL3953269@bill-the-cat/

Signed-off-by: Abdellatif El Khlifi <abdellatif.elkhlifi@arm.com>
Cc: Tom Rini <trini@konsulko.com>

arm_ffa: use debug logs

replace info logs with debug logs

Signed-off-by: Abdellatif El Khlifi <abdellatif.elkhlifi@arm.com>
Cc: Tom Rini <trini@konsulko.com>
Cc: Simon Glass <sjg@chromium.org>
Reviewed-by: Simon Glass <sjg@chromium.org>

arm_ffa: introduce Arm FF-A support

Add Arm FF-A support implementing Arm Firmware Framework for Armv8-A v1.0

The Firmware Framework for Arm A-profile processors (FF-A v1.0) [1]
describes interfaces (ABIs) that standardize communication
between the Secure World and Normal World leveraging TrustZone
technology.

This driver uses 64-bit registers as per SMCCCv1.2 spec and comes
on top of the SMCCC layer. The driver provides the FF-A ABIs needed for
querying the FF-A framework from the secure world.

The driver uses SMC32 calling convention which means using the first
32-bit data of the Xn registers.

All supported ABIs come with their 32-bit version except FFA_RXTX_MAP
which has 64-bit version supported.

Both 32-bit and 64-bit direct messaging are supported which allows both
32-bit and 64-bit clients to use the FF-A bus.

FF-A is a discoverable bus and similar to architecture features.
FF-A bus is discovered using ARM_SMCCC_FEATURES mechanism performed
by the PSCI driver.

Clients are able to probe then use the FF-A bus by calling the DM class
searching APIs (e.g: uclass_first_device).

The Secure World is considered as one entity to communicate with
using the FF-A bus. FF-A communication is handled by one device and
one instance (the bus). This FF-A driver takes care of all the
interactions between Normal world and Secure World.

The driver exports its operations to be used by upper layers.

Exported operations:

- ffa_partition_info_get
- ffa_sync_send_receive
- ffa_rxtx_unmap

Generic FF-A methods are implemented in the Uclass (arm-ffa-uclass.c).
Arm specific methods are implemented in the Arm driver (arm-ffa.c).

For more details please refer to the driver documentation [2].

[1]: https://developer.arm.com/documentation/den0077/latest/
[2]: doc/arch/arm64.ffa.rst

Signed-off-by: Abdellatif El Khlifi <abdellatif.elkhlifi@arm.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Cc: Tom Rini <trini@konsulko.com>
Cc: Jens Wiklander <jens.wiklander@linaro.org>
Cc: Heinrich Schuchardt <xypron.glpk@gmx.de>

Revert "Merge branch '2023-07-24-introduce-FF-A-suppport'"

This reverts commit d927d1a80843e1c3e2a3f0b8f6150790bef83da1, reversing
changes made to c07ad9520c6190070513016fdb495d4703a4a853.

These changes do not pass CI currently.

Signed-off-by: Tom Rini <trini@konsulko.com>

arm_ffa: introduce Arm FF-A support

Add Arm FF-A support implementing Arm Firmware Framework for Armv8-A v1.0

The Firmware Framework for Arm A-profile processors (FF-A v1.0) [1]
describes interfaces (ABIs) that standardize communication
between the Secure World and Normal World leveraging TrustZone
technology.

This driver uses 64-bit registers as per SMCCCv1.2 spec and comes
on top of the SMCCC layer. The driver provides the FF-A ABIs needed for
querying the FF-A framework from the secure world.

The driver uses SMC32 calling convention which means using the first
32-bit data of the Xn registers.

All supported ABIs come with their 32-bit version except FFA_RXTX_MAP
which has 64-bit version supported.

Both 32-bit and 64-bit direct messaging are supported which allows both
32-bit and 64-bit clients to use the FF-A bus.

FF-A is a discoverable bus and similar to architecture features.
FF-A bus is discovered using ARM_SMCCC_FEATURES mechanism performed
by the PSCI driver.

Clients are able to probe then use the FF-A bus by calling the DM class
searching APIs (e.g: uclass_first_device).

The Secure World is considered as one entity to communicate with
using the FF-A bus. FF-A communication is handled by one device and
one instance (the bus). This FF-A driver takes care of all the
interactions between Normal world and Secure World.

The driver exports its operations to be used by upper layers.

Exported operations:

- ffa_partition_info_get
- ffa_sync_send_receive
- ffa_rxtx_unmap

Generic FF-A methods are implemented in the Uclass (arm-ffa-uclass.c).
Arm specific methods are implemented in the Arm driver (arm-ffa.c).

For more details please refer to the driver documentation [2].

[1]: https://developer.arm.com/documentation/den0077/latest/
[2]: doc/arch/arm64.ffa.rst

Signed-off-by: Abdellatif El Khlifi <abdellatif.elkhlifi@arm.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Cc: Tom Rini <trini@konsulko.com>
Cc: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Cc: Jens Wiklander <jens.wiklander@linaro.org>
Cc: Heinrich Schuchardt <xypron.glpk@gmx.de>

arm_ffa: fix: remove deadcode in ffa_print_error_log()

address the CID 464361 Control flow issues [1]

[1]: https://lore.kernel.org/all/20230821210927.GL3953269@bill-the-cat/

Signed-off-by: Abdellatif El Khlifi <abdellatif.elkhlifi@arm.com>
Cc: Tom Rini <trini@konsulko.com>

arm_ffa: use debug logs

replace info logs with debug logs

Signed-off-by: Abdellatif El Khlifi <abdellatif.elkhlifi@arm.com>
Cc: Tom Rini <trini@konsulko.com>
Cc: Simon Glass <sjg@chromium.org>
Reviewed-by: Simon Glass <sjg@chromium.org>

arm_ffa: introduce Arm FF-A support

Add Arm FF-A support implementing Arm Firmware Framework for Armv8-A v1.0

The Firmware Framework for Arm A-profile processors (FF-A v1.0) [1]
describes interfaces (ABIs) that standardize communication
between the Secure World and Normal World leveraging TrustZone
technology.

This driver uses 64-bit registers as per SMCCCv1.2 spec and comes
on top of the SMCCC layer. The driver provides the FF-A ABIs needed for
querying the FF-A framework from the secure world.

The driver uses SMC32 calling convention which means using the first
32-bit data of the Xn registers.

All supported ABIs come with their 32-bit version except FFA_RXTX_MAP
which has 64-bit version supported.

Both 32-bit and 64-bit direct messaging are supported which allows both
32-bit and 64-bit clients to use the FF-A bus.

FF-A is a discoverable bus and similar to architecture features.
FF-A bus is discovered using ARM_SMCCC_FEATURES mechanism performed
by the PSCI driver.

Clients are able to probe then use the FF-A bus by calling the DM class
searching APIs (e.g: uclass_first_device).

The Secure World is considered as one entity to communicate with
using the FF-A bus. FF-A communication is handled by one device and
one instance (the bus). This FF-A driver takes care of all the
interactions between Normal world and Secure World.

The driver exports its operations to be used by upper layers.

Exported operations:

- ffa_partition_info_get
- ffa_sync_send_receive
- ffa_rxtx_unmap

Generic FF-A methods are implemented in the Uclass (arm-ffa-uclass.c).
Arm specific methods are implemented in the Arm driver (arm-ffa.c).

For more details please refer to the driver documentation [2].

[1]: https://developer.arm.com/documentation/den0077/latest/
[2]: doc/arch/arm64.ffa.rst

Signed-off-by: Abdellatif El Khlifi <abdellatif.elkhlifi@arm.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Cc: Tom Rini <trini@konsulko.com>
Cc: Jens Wiklander <jens.wiklander@linaro.org>
Cc: Heinrich Schuchardt <xypron.glpk@gmx.de>

Revert "Merge branch '2023-07-24-introduce-FF-A-suppport'"

This reverts commit d927d1a80843e1c3e2a3f0b8f6150790bef83da1, reversing
changes made to c07ad9520c6190070513016fdb495d4703a4a853.

These changes do not pass CI currently.

Signed-off-by: Tom Rini <trini@konsulko.com>

arm_ffa: introduce Arm FF-A support

Add Arm FF-A support implementing Arm Firmware Framework for Armv8-A v1.0

The Firmware Framework for Arm A-profile processors (FF-A v1.0) [1]
describes interfaces (ABIs) that standardize communication
between the Secure World and Normal World leveraging TrustZone
technology.

This driver uses 64-bit registers as per SMCCCv1.2 spec and comes
on top of the SMCCC layer. The driver provides the FF-A ABIs needed for
querying the FF-A framework from the secure world.

The driver uses SMC32 calling convention which means using the first
32-bit data of the Xn registers.

All supported ABIs come with their 32-bit version except FFA_RXTX_MAP
which has 64-bit version supported.

Both 32-bit and 64-bit direct messaging are supported which allows both
32-bit and 64-bit clients to use the FF-A bus.

FF-A is a discoverable bus and similar to architecture features.
FF-A bus is discovered using ARM_SMCCC_FEATURES mechanism performed
by the PSCI driver.

Clients are able to probe then use the FF-A bus by calling the DM class
searching APIs (e.g: uclass_first_device).

The Secure World is considered as one entity to communicate with
using the FF-A bus. FF-A communication is handled by one device and
one instance (the bus). This FF-A driver takes care of all the
interactions between Normal world and Secure World.

The driver exports its operations to be used by upper layers.

Exported operations:

- ffa_partition_info_get
- ffa_sync_send_receive
- ffa_rxtx_unmap

Generic FF-A methods are implemented in the Uclass (arm-ffa-uclass.c).
Arm specific methods are implemented in the Arm driver (arm-ffa.c).

For more details please refer to the driver documentation [2].

[1]: https://developer.arm.com/documentation/den0077/latest/
[2]: doc/arch/arm64.ffa.rst

Signed-off-by: Abdellatif El Khlifi <abdellatif.elkhlifi@arm.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Cc: Tom Rini <trini@konsulko.com>
Cc: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Cc: Jens Wiklander <jens.wiklander@linaro.org>
Cc: Heinrich Schuchardt <xypron.glpk@gmx.de>

arm_ffa: fix: remove deadcode in ffa_print_error_log()

address the CID 464361 Control flow issues [1]

[1]: https://lore.kernel.org/all/20230821210927.GL3953269@bill-the-cat/

Signed-off-by: Abdellatif El Khlifi <abdellatif.elkhlifi@arm.com>
Cc: Tom Rini <trini@konsulko.com>

arm_ffa: use debug logs

replace info logs with debug logs

Signed-off-by: Abdellatif El Khlifi <abdellatif.elkhlifi@arm.com>
Cc: Tom Rini <trini@konsulko.com>
Cc: Simon Glass <sjg@chromium.org>
Reviewed-by: Simon Glass <sjg@chromium.org>

arm_ffa: introduce Arm FF-A support

Add Arm FF-A support implementing Arm Firmware Framework for Armv8-A v1.0

The Firmware Framework for Arm A-profile processors (FF-A v1.0) [1]
describes interfaces (ABIs) that standardize communication
between the Secure World and Normal World leveraging TrustZone
technology.

This driver uses 64-bit registers as per SMCCCv1.2 spec and comes
on top of the SMCCC layer. The driver provides the FF-A ABIs needed for
querying the FF-A framework from the secure world.

The driver uses SMC32 calling convention which means using the first
32-bit data of the Xn registers.

All supported ABIs come with their 32-bit version except FFA_RXTX_MAP
which has 64-bit version supported.

Both 32-bit and 64-bit direct messaging are supported which allows both
32-bit and 64-bit clients to use the FF-A bus.

FF-A is a discoverable bus and similar to architecture features.
FF-A bus is discovered using ARM_SMCCC_FEATURES mechanism performed
by the PSCI driver.

Clients are able to probe then use the FF-A bus by calling the DM class
searching APIs (e.g: uclass_first_device).

The Secure World is considered as one entity to communicate with
using the FF-A bus. FF-A communication is handled by one device and
one instance (the bus). This FF-A driver takes care of all the
interactions between Normal world and Secure World.

The driver exports its operations to be used by upper layers.

Exported operations:

- ffa_partition_info_get
- ffa_sync_send_receive
- ffa_rxtx_unmap

Generic FF-A methods are implemented in the Uclass (arm-ffa-uclass.c).
Arm specific methods are implemented in the Arm driver (arm-ffa.c).

For more details please refer to the driver documentation [2].

[1]: https://developer.arm.com/documentation/den0077/latest/
[2]: doc/arch/arm64.ffa.rst

Signed-off-by: Abdellatif El Khlifi <abdellatif.elkhlifi@arm.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Cc: Tom Rini <trini@konsulko.com>
Cc: Jens Wiklander <jens.wiklander@linaro.org>
Cc: Heinrich Schuchardt <xypron.glpk@gmx.de>

Revert "Merge branch '2023-07-24-introduce-FF-A-suppport'"

This reverts commit d927d1a80843e1c3e2a3f0b8f6150790bef83da1, reversing
changes made to c07ad9520c6190070513016fdb495d4703a4a853.

These changes do not pass CI currently.

Signed-off-by: Tom Rini <trini@konsulko.com>

arm_ffa: introduce Arm FF-A support

Add Arm FF-A support implementing Arm Firmware Framework for Armv8-A v1.0

The Firmware Framework for Arm A-profile processors (FF-A v1.0) [1]
describes interfaces (ABIs) that standardize communication
between the Secure World and Normal World leveraging TrustZone
technology.

This driver uses 64-bit registers as per SMCCCv1.2 spec and comes
on top of the SMCCC layer. The driver provides the FF-A ABIs needed for
querying the FF-A framework from the secure world.

The driver uses SMC32 calling convention which means using the first
32-bit data of the Xn registers.

All supported ABIs come with their 32-bit version except FFA_RXTX_MAP
which has 64-bit version supported.

Both 32-bit and 64-bit direct messaging are supported which allows both
32-bit and 64-bit clients to use the FF-A bus.

FF-A is a discoverable bus and similar to architecture features.
FF-A bus is discovered using ARM_SMCCC_FEATURES mechanism performed
by the PSCI driver.

Clients are able to probe then use the FF-A bus by calling the DM class
searching APIs (e.g: uclass_first_device).

The Secure World is considered as one entity to communicate with
using the FF-A bus. FF-A communication is handled by one device and
one instance (the bus). This FF-A driver takes care of all the
interactions between Normal world and Secure World.

The driver exports its operations to be used by upper layers.

Exported operations:

- ffa_partition_info_get
- ffa_sync_send_receive
- ffa_rxtx_unmap

Generic FF-A methods are implemented in the Uclass (arm-ffa-uclass.c).
Arm specific methods are implemented in the Arm driver (arm-ffa.c).

For more details please refer to the driver documentation [2].

[1]: https://developer.arm.com/documentation/den0077/latest/
[2]: doc/arch/arm64.ffa.rst

Signed-off-by: Abdellatif El Khlifi <abdellatif.elkhlifi@arm.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Cc: Tom Rini <trini@konsulko.com>
Cc: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Cc: Jens Wiklander <jens.wiklander@linaro.org>
Cc: Heinrich Schuchardt <xypron.glpk@gmx.de>

arm_ffa: fix: remove deadcode in ffa_print_error_log()

address the CID 464361 Control flow issues [1]

[1]: https://lore.kernel.org/all/20230821210927.GL3953269@bill-the-cat/

Signed-off-by: Abdellatif El Khlifi <abdellatif.elkhlifi@arm.com>
Cc: Tom Rini <trini@konsulko.com>

arm_ffa: use debug logs

replace info logs with debug logs

Signed-off-by: Abdellatif El Khlifi <abdellatif.elkhlifi@arm.com>
Cc: Tom Rini <trini@konsulko.com>
Cc: Simon Glass <sjg@chromium.org>
Reviewed-by: Simon Glass <sjg@chromium.org>

arm_ffa: introduce Arm FF-A support

Add Arm FF-A support implementing Arm Firmware Framework for Armv8-A v1.0

The Firmware Framework for Arm A-profile processors (FF-A v1.0) [1]
describes interfaces (ABIs) that standardize communication
between the Secure World and Normal World leveraging TrustZone
technology.

This driver uses 64-bit registers as per SMCCCv1.2 spec and comes
on top of the SMCCC layer. The driver provides the FF-A ABIs needed for
querying the FF-A framework from the secure world.

The driver uses SMC32 calling convention which means using the first
32-bit data of the Xn registers.

All supported ABIs come with their 32-bit version except FFA_RXTX_MAP
which has 64-bit version supported.

Both 32-bit and 64-bit direct messaging are supported which allows both
32-bit and 64-bit clients to use the FF-A bus.

FF-A is a discoverable bus and similar to architecture features.
FF-A bus is discovered using ARM_SMCCC_FEATURES mechanism performed
by the PSCI driver.

Clients are able to probe then use the FF-A bus by calling the DM class
searching APIs (e.g: uclass_first_device).

The Secure World is considered as one entity to communicate with
using the FF-A bus. FF-A communication is handled by one device and
one instance (the bus). This FF-A driver takes care of all the
interactions between Normal world and Secure World.

The driver exports its operations to be used by upper layers.

Exported operations:

- ffa_partition_info_get
- ffa_sync_send_receive
- ffa_rxtx_unmap

Generic FF-A methods are implemented in the Uclass (arm-ffa-uclass.c).
Arm specific methods are implemented in the Arm driver (arm-ffa.c).

For more details please refer to the driver documentation [2].

[1]: https://developer.arm.com/documentation/den0077/latest/
[2]: doc/arch/arm64.ffa.rst

Signed-off-by: Abdellatif El Khlifi <abdellatif.elkhlifi@arm.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Cc: Tom Rini <trini@konsulko.com>
Cc: Jens Wiklander <jens.wiklander@linaro.org>
Cc: Heinrich Schuchardt <xypron.glpk@gmx.de>

Revert "Merge branch '2023-07-24-introduce-FF-A-suppport'"

This reverts commit d927d1a80843e1c3e2a3f0b8f6150790bef83da1, reversing
changes made to c07ad9520c6190070513016fdb495d4703a4a853.

These changes do not pass CI currently.

Signed-off-by: Tom Rini <trini@konsulko.com>

arm_ffa: introduce Arm FF-A support

Add Arm FF-A support implementing Arm Firmware Framework for Armv8-A v1.0

The Firmware Framework for Arm A-profile processors (FF-A v1.0) [1]
describes interfaces (ABIs) that standardize communication
between the Secure World and Normal World leveraging TrustZone
technology.

This driver uses 64-bit registers as per SMCCCv1.2 spec and comes
on top of the SMCCC layer. The driver provides the FF-A ABIs needed for
querying the FF-A framework from the secure world.

The driver uses SMC32 calling convention which means using the first
32-bit data of the Xn registers.

All supported ABIs come with their 32-bit version except FFA_RXTX_MAP
which has 64-bit version supported.

Both 32-bit and 64-bit direct messaging are supported which allows both
32-bit and 64-bit clients to use the FF-A bus.

FF-A is a discoverable bus and similar to architecture features.
FF-A bus is discovered using ARM_SMCCC_FEATURES mechanism performed
by the PSCI driver.

Clients are able to probe then use the FF-A bus by calling the DM class
searching APIs (e.g: uclass_first_device).

The Secure World is considered as one entity to communicate with
using the FF-A bus. FF-A communication is handled by one device and
one instance (the bus). This FF-A driver takes care of all the
interactions between Normal world and Secure World.

The driver exports its operations to be used by upper layers.

Exported operations:

- ffa_partition_info_get
- ffa_sync_send_receive
- ffa_rxtx_unmap

Generic FF-A methods are implemented in the Uclass (arm-ffa-uclass.c).
Arm specific methods are implemented in the Arm driver (arm-ffa.c).

For more details please refer to the driver documentation [2].

[1]: https://developer.arm.com/documentation/den0077/latest/
[2]: doc/arch/arm64.ffa.rst

Signed-off-by: Abdellatif El Khlifi <abdellatif.elkhlifi@arm.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Cc: Tom Rini <trini@konsulko.com>
Cc: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Cc: Jens Wiklander <jens.wiklander@linaro.org>
Cc: Heinrich Schuchardt <xypron.glpk@gmx.de>

arm_ffa: fix: remove deadcode in ffa_print_error_log()

address the CID 464361 Control flow issues [1]

[1]: https://lore.kernel.org/all/20230821210927.GL3953269@bill-the-cat/

Signed-off-by: Abdellatif El Khlifi <abdellatif.elkhlifi@arm.com>
Cc: Tom Rini <trini@konsulko.com>

arm_ffa: use debug logs

replace info logs with debug logs

Signed-off-by: Abdellatif El Khlifi <abdellatif.elkhlifi@arm.com>
Cc: Tom Rini <trini@konsulko.com>
Cc: Simon Glass <sjg@chromium.org>
Reviewed-by: Simon Glass <sjg@chromium.org>

arm_ffa: introduce Arm FF-A support

Add Arm FF-A support implementing Arm Firmware Framework for Armv8-A v1.0

The Firmware Framework for Arm A-profile processors (FF-A v1.0) [1]
describes interfaces (ABIs) that standardize communication
between the Secure World and Normal World leveraging TrustZone
technology.

This driver uses 64-bit registers as per SMCCCv1.2 spec and comes
on top of the SMCCC layer. The driver provides the FF-A ABIs needed for
querying the FF-A framework from the secure world.

The driver uses SMC32 calling convention which means using the first
32-bit data of the Xn registers.

All supported ABIs come with their 32-bit version except FFA_RXTX_MAP
which has 64-bit version supported.

Both 32-bit and 64-bit direct messaging are supported which allows both
32-bit and 64-bit clients to use the FF-A bus.

FF-A is a discoverable bus and similar to architecture features.
FF-A bus is discovered using ARM_SMCCC_FEATURES mechanism performed
by the PSCI driver.

Clients are able to probe then use the FF-A bus by calling the DM class
searching APIs (e.g: uclass_first_device).

The Secure World is considered as one entity to communicate with
using the FF-A bus. FF-A communication is handled by one device and
one instance (the bus). This FF-A driver takes care of all the
interactions between Normal world and Secure World.

The driver exports its operations to be used by upper layers.

Exported operations:

- ffa_partition_info_get
- ffa_sync_send_receive
- ffa_rxtx_unmap

Generic FF-A methods are implemented in the Uclass (arm-ffa-uclass.c).
Arm specific methods are implemented in the Arm driver (arm-ffa.c).

For more details please refer to the driver documentation [2].

[1]: https://developer.arm.com/documentation/den0077/latest/
[2]: doc/arch/arm64.ffa.rst

Signed-off-by: Abdellatif El Khlifi <abdellatif.elkhlifi@arm.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Cc: Tom Rini <trini@konsulko.com>
Cc: Jens Wiklander <jens.wiklander@linaro.org>
Cc: Heinrich Schuchardt <xypron.glpk@gmx.de>

Revert "Merge branch '2023-07-24-introduce-FF-A-suppport'"

This reverts commit d927d1a80843e1c3e2a3f0b8f6150790bef83da1, reversing
changes made to c07ad9520c6190070513016fdb495d4703a4a853.

These changes do not pass CI currently.

Signed-off-by: Tom Rini <trini@konsulko.com>

arm_ffa: introduce Arm FF-A support

Add Arm FF-A support implementing Arm Firmware Framework for Armv8-A v1.0

The Firmware Framework for Arm A-profile processors (FF-A v1.0) [1]
describes interfaces (ABIs) that standardize communication
between the Secure World and Normal World leveraging TrustZone
technology.

This driver uses 64-bit registers as per SMCCCv1.2 spec and comes
on top of the SMCCC layer. The driver provides the FF-A ABIs needed for
querying the FF-A framework from the secure world.

The driver uses SMC32 calling convention which means using the first
32-bit data of the Xn registers.

All supported ABIs come with their 32-bit version except FFA_RXTX_MAP
which has 64-bit version supported.

Both 32-bit and 64-bit direct messaging are supported which allows both
32-bit and 64-bit clients to use the FF-A bus.

FF-A is a discoverable bus and similar to architecture features.
FF-A bus is discovered using ARM_SMCCC_FEATURES mechanism performed
by the PSCI driver.

Clients are able to probe then use the FF-A bus by calling the DM class
searching APIs (e.g: uclass_first_device).

The Secure World is considered as one entity to communicate with
using the FF-A bus. FF-A communication is handled by one device and
one instance (the bus). This FF-A driver takes care of all the
interactions between Normal world and Secure World.

The driver exports its operations to be used by upper layers.

Exported operations:

- ffa_partition_info_get
- ffa_sync_send_receive
- ffa_rxtx_unmap

Generic FF-A methods are implemented in the Uclass (arm-ffa-uclass.c).
Arm specific methods are implemented in the Arm driver (arm-ffa.c).

For more details please refer to the driver documentation [2].

[1]: https://developer.arm.com/documentation/den0077/latest/
[2]: doc/arch/arm64.ffa.rst

Signed-off-by: Abdellatif El Khlifi <abdellatif.elkhlifi@arm.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Cc: Tom Rini <trini@konsulko.com>
Cc: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Cc: Jens Wiklander <jens.wiklander@linaro.org>
Cc: Heinrich Schuchardt <xypron.glpk@gmx.de>

arm_ffa: fix: remove deadcode in ffa_print_error_log()

address the CID 464361 Control flow issues [1]

[1]: https://lore.kernel.org/all/20230821210927.GL3953269@bill-the-cat/

Signed-off-by: Abdellatif El Khlifi <abdellatif.elkhlifi@arm.com>
Cc: Tom Rini <trini@konsulko.com>

arm_ffa: use debug logs

replace info logs with debug logs

Signed-off-by: Abdellatif El Khlifi <abdellatif.elkhlifi@arm.com>
Cc: Tom Rini <trini@konsulko.com>
Cc: Simon Glass <sjg@chromium.org>
Reviewed-by: Simon Glass <sjg@chromium.org>

arm_ffa: introduce Arm FF-A support

Add Arm FF-A support implementing Arm Firmware Framework for Armv8-A v1.0

The Firmware Framework for Arm A-profile processors (FF-A v1.0) [1]
describes interfaces (ABIs) that standardize communication
between the Secure World and Normal World leveraging TrustZone
technology.

This driver uses 64-bit registers as per SMCCCv1.2 spec and comes
on top of the SMCCC layer. The driver provides the FF-A ABIs needed for
querying the FF-A framework from the secure world.

The driver uses SMC32 calling convention which means using the first
32-bit data of the Xn registers.

All supported ABIs come with their 32-bit version except FFA_RXTX_MAP
which has 64-bit version supported.

Both 32-bit and 64-bit direct messaging are supported which allows both
32-bit and 64-bit clients to use the FF-A bus.

FF-A is a discoverable bus and similar to architecture features.
FF-A bus is discovered using ARM_SMCCC_FEATURES mechanism performed
by the PSCI driver.

Clients are able to probe then use the FF-A bus by calling the DM class
searching APIs (e.g: uclass_first_device).

The Secure World is considered as one entity to communicate with
using the FF-A bus. FF-A communication is handled by one device and
one instance (the bus). This FF-A driver takes care of all the
interactions between Normal world and Secure World.

The driver exports its operations to be used by upper layers.

Exported operations:

- ffa_partition_info_get
- ffa_sync_send_receive
- ffa_rxtx_unmap

Generic FF-A methods are implemented in the Uclass (arm-ffa-uclass.c).
Arm specific methods are implemented in the Arm driver (arm-ffa.c).

For more details please refer to the driver documentation [2].

[1]: https://developer.arm.com/documentation/den0077/latest/
[2]: doc/arch/arm64.ffa.rst

Signed-off-by: Abdellatif El Khlifi <abdellatif.elkhlifi@arm.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Cc: Tom Rini <trini@konsulko.com>
Cc: Jens Wiklander <jens.wiklander@linaro.org>
Cc: Heinrich Schuchardt <xypron.glpk@gmx.de>

Revert "Merge branch '2023-07-24-introduce-FF-A-suppport'"

This reverts commit d927d1a80843e1c3e2a3f0b8f6150790bef83da1, reversing
changes made to c07ad9520c6190070513016fdb495d4703a4a853.

These changes do not pass CI currently.

Signed-off-by: Tom Rini <trini@konsulko.com>

arm_ffa: introduce Arm FF-A support

Add Arm FF-A support implementing Arm Firmware Framework for Armv8-A v1.0

The Firmware Framework for Arm A-profile processors (FF-A v1.0) [1]
describes interfaces (ABIs) that standardize communication
between the Secure World and Normal World leveraging TrustZone
technology.

This driver uses 64-bit registers as per SMCCCv1.2 spec and comes
on top of the SMCCC layer. The driver provides the FF-A ABIs needed for
querying the FF-A framework from the secure world.

The driver uses SMC32 calling convention which means using the first
32-bit data of the Xn registers.

All supported ABIs come with their 32-bit version except FFA_RXTX_MAP
which has 64-bit version supported.

Both 32-bit and 64-bit direct messaging are supported which allows both
32-bit and 64-bit clients to use the FF-A bus.

FF-A is a discoverable bus and similar to architecture features.
FF-A bus is discovered using ARM_SMCCC_FEATURES mechanism performed
by the PSCI driver.

Clients are able to probe then use the FF-A bus by calling the DM class
searching APIs (e.g: uclass_first_device).

The Secure World is considered as one entity to communicate with
using the FF-A bus. FF-A communication is handled by one device and
one instance (the bus). This FF-A driver takes care of all the
interactions between Normal world and Secure World.

The driver exports its operations to be used by upper layers.

Exported operations:

- ffa_partition_info_get
- ffa_sync_send_receive
- ffa_rxtx_unmap

Generic FF-A methods are implemented in the Uclass (arm-ffa-uclass.c).
Arm specific methods are implemented in the Arm driver (arm-ffa.c).

For more details please refer to the driver documentation [2].

[1]: https://developer.arm.com/documentation/den0077/latest/
[2]: doc/arch/arm64.ffa.rst

Signed-off-by: Abdellatif El Khlifi <abdellatif.elkhlifi@arm.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Cc: Tom Rini <trini@konsulko.com>
Cc: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Cc: Jens Wiklander <jens.wiklander@linaro.org>
Cc: Heinrich Schuchardt <xypron.glpk@gmx.de>

arm_ffa: fix: remove deadcode in ffa_print_error_log()

address the CID 464361 Control flow issues [1]

[1]: https://lore.kernel.org/all/20230821210927.GL3953269@bill-the-cat/

Signed-off-by: Abdellatif El Khlifi <abdellatif.elkhlifi@arm.com>
Cc: Tom Rini <trini@konsulko.com>

arm_ffa: use debug logs

replace info logs with debug logs

Signed-off-by: Abdellatif El Khlifi <abdellatif.elkhlifi@arm.com>
Cc: Tom Rini <trini@konsulko.com>
Cc: Simon Glass <sjg@chromium.org>
Reviewed-by: Simon Glass <sjg@chromium.org>

arm_ffa: introduce Arm FF-A support

Add Arm FF-A support implementing Arm Firmware Framework for Armv8-A v1.0

The Firmware Framework for Arm A-profile processors (FF-A v1.0) [1]
describes interfaces (ABIs) that standardize communication
between the Secure World and Normal World leveraging TrustZone
technology.

This driver uses 64-bit registers as per SMCCCv1.2 spec and comes
on top of the SMCCC layer. The driver provides the FF-A ABIs needed for
querying the FF-A framework from the secure world.

The driver uses SMC32 calling convention which means using the first
32-bit data of the Xn registers.

All supported ABIs come with their 32-bit version except FFA_RXTX_MAP
which has 64-bit version supported.

Both 32-bit and 64-bit direct messaging are supported which allows both
32-bit and 64-bit clients to use the FF-A bus.

FF-A is a discoverable bus and similar to architecture features.
FF-A bus is discovered using ARM_SMCCC_FEATURES mechanism performed
by the PSCI driver.

Clients are able to probe then use the FF-A bus by calling the DM class
searching APIs (e.g: uclass_first_device).

The Secure World is considered as one entity to communicate with
using the FF-A bus. FF-A communication is handled by one device and
one instance (the bus). This FF-A driver takes care of all the
interactions between Normal world and Secure World.

The driver exports its operations to be used by upper layers.

Exported operations:

- ffa_partition_info_get
- ffa_sync_send_receive
- ffa_rxtx_unmap

Generic FF-A methods are implemented in the Uclass (arm-ffa-uclass.c).
Arm specific methods are implemented in the Arm driver (arm-ffa.c).

For more details please refer to the driver documentation [2].

[1]: https://developer.arm.com/documentation/den0077/latest/
[2]: doc/arch/arm64.ffa.rst

Signed-off-by: Abdellatif El Khlifi <abdellatif.elkhlifi@arm.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Cc: Tom Rini <trini@konsulko.com>
Cc: Jens Wiklander <jens.wiklander@linaro.org>
Cc: Heinrich Schuchardt <xypron.glpk@gmx.de>

Revert "Merge branch '2023-07-24-introduce-FF-A-suppport'"

This reverts commit d927d1a80843e1c3e2a3f0b8f6150790bef83da1, reversing
changes made to c07ad9520c6190070513016fdb495d4703a4a853.

These changes do not pass CI currently.

Signed-off-by: Tom Rini <trini@konsulko.com>

arm_ffa: introduce Arm FF-A support

Add Arm FF-A support implementing Arm Firmware Framework for Armv8-A v1.0

The Firmware Framework for Arm A-profile processors (FF-A v1.0) [1]
describes interfaces (ABIs) that standardize communication
between the Secure World and Normal World leveraging TrustZone
technology.

This driver uses 64-bit registers as per SMCCCv1.2 spec and comes
on top of the SMCCC layer. The driver provides the FF-A ABIs needed for
querying the FF-A framework from the secure world.

The driver uses SMC32 calling convention which means using the first
32-bit data of the Xn registers.

All supported ABIs come with their 32-bit version except FFA_RXTX_MAP
which has 64-bit version supported.

Both 32-bit and 64-bit direct messaging are supported which allows both
32-bit and 64-bit clients to use the FF-A bus.

FF-A is a discoverable bus and similar to architecture features.
FF-A bus is discovered using ARM_SMCCC_FEATURES mechanism performed
by the PSCI driver.

Clients are able to probe then use the FF-A bus by calling the DM class
searching APIs (e.g: uclass_first_device).

The Secure World is considered as one entity to communicate with
using the FF-A bus. FF-A communication is handled by one device and
one instance (the bus). This FF-A driver takes care of all the
interactions between Normal world and Secure World.

The driver exports its operations to be used by upper layers.

Exported operations:

- ffa_partition_info_get
- ffa_sync_send_receive
- ffa_rxtx_unmap

Generic FF-A methods are implemented in the Uclass (arm-ffa-uclass.c).
Arm specific methods are implemented in the Arm driver (arm-ffa.c).

For more details please refer to the driver documentation [2].

[1]: https://developer.arm.com/documentation/den0077/latest/
[2]: doc/arch/arm64.ffa.rst

Signed-off-by: Abdellatif El Khlifi <abdellatif.elkhlifi@arm.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Cc: Tom Rini <trini@konsulko.com>
Cc: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Cc: Jens Wiklander <jens.wiklander@linaro.org>
Cc: Heinrich Schuchardt <xypron.glpk@gmx.de>

arm_ffa: fix: remove deadcode in ffa_print_error_log()

address the CID 464361 Control flow issues [1]

[1]: https://lore.kernel.org/all/20230821210927.GL3953269@bill-the-cat/

Signed-off-by: Abdellatif El Khlifi <abdellatif.elkhlifi@arm.com>
Cc: Tom Rini <trini@konsulko.com>

arm_ffa: use debug logs

replace info logs with debug logs

Signed-off-by: Abdellatif El Khlifi <abdellatif.elkhlifi@arm.com>
Cc: Tom Rini <trini@konsulko.com>
Cc: Simon Glass <sjg@chromium.org>
Reviewed-by: Simon Glass <sjg@chromium.org>

arm_ffa: introduce Arm FF-A support

Add Arm FF-A support implementing Arm Firmware Framework for Armv8-A v1.0

The Firmware Framework for Arm A-profile processors (FF-A v1.0) [1]
describes interfaces (ABIs) that standardize communication
between the Secure World and Normal World leveraging TrustZone
technology.

This driver uses 64-bit registers as per SMCCCv1.2 spec and comes
on top of the SMCCC layer. The driver provides the FF-A ABIs needed for
querying the FF-A framework from the secure world.

The driver uses SMC32 calling convention which means using the first
32-bit data of the Xn registers.

All supported ABIs come with their 32-bit version except FFA_RXTX_MAP
which has 64-bit version supported.

Both 32-bit and 64-bit direct messaging are supported which allows both
32-bit and 64-bit clients to use the FF-A bus.

FF-A is a discoverable bus and similar to architecture features.
FF-A bus is discovered using ARM_SMCCC_FEATURES mechanism performed
by the PSCI driver.

Clients are able to probe then use the FF-A bus by calling the DM class
searching APIs (e.g: uclass_first_device).

The Secure World is considered as one entity to communicate with
using the FF-A bus. FF-A communication is handled by one device and
one instance (the bus). This FF-A driver takes care of all the
interactions between Normal world and Secure World.

The driver exports its operations to be used by upper layers.

Exported operations:

- ffa_partition_info_get
- ffa_sync_send_receive
- ffa_rxtx_unmap

Generic FF-A methods are implemented in the Uclass (arm-ffa-uclass.c).
Arm specific methods are implemented in the Arm driver (arm-ffa.c).

For more details please refer to the driver documentation [2].

[1]: https://developer.arm.com/documentation/den0077/latest/
[2]: doc/arch/arm64.ffa.rst

Signed-off-by: Abdellatif El Khlifi <abdellatif.elkhlifi@arm.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Cc: Tom Rini <trini@konsulko.com>
Cc: Jens Wiklander <jens.wiklander@linaro.org>
Cc: Heinrich Schuchardt <xypron.glpk@gmx.de>

Revert "Merge branch '2023-07-24-introduce-FF-A-suppport'"

This reverts commit d927d1a80843e1c3e2a3f0b8f6150790bef83da1, reversing
changes made to c07ad9520c6190070513016fdb495d4703a4a853.

These changes do not pass CI currently.

Signed-off-by: Tom Rini <trini@konsulko.com>

arm_ffa: introduce Arm FF-A support

Add Arm FF-A support implementing Arm Firmware Framework for Armv8-A v1.0

The Firmware Framework for Arm A-profile processors (FF-A v1.0) [1]
describes interfaces (ABIs) that standardize communication
between the Secure World and Normal World leveraging TrustZone
technology.

This driver uses 64-bit registers as per SMCCCv1.2 spec and comes
on top of the SMCCC layer. The driver provides the FF-A ABIs needed for
querying the FF-A framework from the secure world.

The driver uses SMC32 calling convention which means using the first
32-bit data of the Xn registers.

All supported ABIs come with their 32-bit version except FFA_RXTX_MAP
which has 64-bit version supported.

Both 32-bit and 64-bit direct messaging are supported which allows both
32-bit and 64-bit clients to use the FF-A bus.

FF-A is a discoverable bus and similar to architecture features.
FF-A bus is discovered using ARM_SMCCC_FEATURES mechanism performed
by the PSCI driver.

Clients are able to probe then use the FF-A bus by calling the DM class
searching APIs (e.g: uclass_first_device).

The Secure World is considered as one entity to communicate with
using the FF-A bus. FF-A communication is handled by one device and
one instance (the bus). This FF-A driver takes care of all the
interactions between Normal world and Secure World.

The driver exports its operations to be used by upper layers.

Exported operations:

- ffa_partition_info_get
- ffa_sync_send_receive
- ffa_rxtx_unmap

Generic FF-A methods are implemented in the Uclass (arm-ffa-uclass.c).
Arm specific methods are implemented in the Arm driver (arm-ffa.c).

For more details please refer to the driver documentation [2].

[1]: https://developer.arm.com/documentation/den0077/latest/
[2]: doc/arch/arm64.ffa.rst

Signed-off-by: Abdellatif El Khlifi <abdellatif.elkhlifi@arm.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Cc: Tom Rini <trini@konsulko.com>
Cc: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Cc: Jens Wiklander <jens.wiklander@linaro.org>
Cc: Heinrich Schuchardt <xypron.glpk@gmx.de>

arm_ffa: fix: remove deadcode in ffa_print_error_log()

address the CID 464361 Control flow issues [1]

[1]: https://lore.kernel.org/all/20230821210927.GL3953269@bill-the-cat/

Signed-off-by: Abdellatif El Khlifi <abdellatif.elkhlifi@arm.com>
Cc: Tom Rini <trini@konsulko.com>

arm_ffa: use debug logs

replace info logs with debug logs

Signed-off-by: Abdellatif El Khlifi <abdellatif.elkhlifi@arm.com>
Cc: Tom Rini <trini@konsulko.com>
Cc: Simon Glass <sjg@chromium.org>
Reviewed-by: Simon Glass <sjg@chromium.org>

arm_ffa: introduce Arm FF-A support

Add Arm FF-A support implementing Arm Firmware Framework for Armv8-A v1.0

The Firmware Framework for Arm A-profile processors (FF-A v1.0) [1]
describes interfaces (ABIs) that standardize communication
between the Secure World and Normal World leveraging TrustZone
technology.

This driver uses 64-bit registers as per SMCCCv1.2 spec and comes
on top of the SMCCC layer. The driver provides the FF-A ABIs needed for
querying the FF-A framework from the secure world.

The driver uses SMC32 calling convention which means using the first
32-bit data of the Xn registers.

All supported ABIs come with their 32-bit version except FFA_RXTX_MAP
which has 64-bit version supported.

Both 32-bit and 64-bit direct messaging are supported which allows both
32-bit and 64-bit clients to use the FF-A bus.

FF-A is a discoverable bus and similar to architecture features.
FF-A bus is discovered using ARM_SMCCC_FEATURES mechanism performed
by the PSCI driver.

Clients are able to probe then use the FF-A bus by calling the DM class
searching APIs (e.g: uclass_first_device).

The Secure World is considered as one entity to communicate with
using the FF-A bus. FF-A communication is handled by one device and
one instance (the bus). This FF-A driver takes care of all the
interactions between Normal world and Secure World.

The driver exports its operations to be used by upper layers.

Exported operations:

- ffa_partition_info_get
- ffa_sync_send_receive
- ffa_rxtx_unmap

Generic FF-A methods are implemented in the Uclass (arm-ffa-uclass.c).
Arm specific methods are implemented in the Arm driver (arm-ffa.c).

For more details please refer to the driver documentation [2].

[1]: https://developer.arm.com/documentation/den0077/latest/
[2]: doc/arch/arm64.ffa.rst

Signed-off-by: Abdellatif El Khlifi <abdellatif.elkhlifi@arm.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Cc: Tom Rini <trini@konsulko.com>
Cc: Jens Wiklander <jens.wiklander@linaro.org>
Cc: Heinrich Schuchardt <xypron.glpk@gmx.de>

Revert "Merge branch '2023-07-24-introduce-FF-A-suppport'"

This reverts commit d927d1a80843e1c3e2a3f0b8f6150790bef83da1, reversing
changes made to c07ad9520c6190070513016fdb495d4703a4a853.

These changes do not pass CI currently.

Signed-off-by: Tom Rini <trini@konsulko.com>

arm_ffa: introduce Arm FF-A support

Add Arm FF-A support implementing Arm Firmware Framework for Armv8-A v1.0

The Firmware Framework for Arm A-profile processors (FF-A v1.0) [1]
describes interfaces (ABIs) that standardize communication
between the Secure World and Normal World leveraging TrustZone
technology.

This driver uses 64-bit registers as per SMCCCv1.2 spec and comes
on top of the SMCCC layer. The driver provides the FF-A ABIs needed for
querying the FF-A framework from the secure world.

The driver uses SMC32 calling convention which means using the first
32-bit data of the Xn registers.

All supported ABIs come with their 32-bit version except FFA_RXTX_MAP
which has 64-bit version supported.

Both 32-bit and 64-bit direct messaging are supported which allows both
32-bit and 64-bit clients to use the FF-A bus.

FF-A is a discoverable bus and similar to architecture features.
FF-A bus is discovered using ARM_SMCCC_FEATURES mechanism performed
by the PSCI driver.

Clients are able to probe then use the FF-A bus by calling the DM class
searching APIs (e.g: uclass_first_device).

The Secure World is considered as one entity to communicate with
using the FF-A bus. FF-A communication is handled by one device and
one instance (the bus). This FF-A driver takes care of all the
interactions between Normal world and Secure World.

The driver exports its operations to be used by upper layers.

Exported operations:

- ffa_partition_info_get
- ffa_sync_send_receive
- ffa_rxtx_unmap

Generic FF-A methods are implemented in the Uclass (arm-ffa-uclass.c).
Arm specific methods are implemented in the Arm driver (arm-ffa.c).

For more details please refer to the driver documentation [2].

[1]: https://developer.arm.com/documentation/den0077/latest/
[2]: doc/arch/arm64.ffa.rst

Signed-off-by: Abdellatif El Khlifi <abdellatif.elkhlifi@arm.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Cc: Tom Rini <trini@konsulko.com>
Cc: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Cc: Jens Wiklander <jens.wiklander@linaro.org>
Cc: Heinrich Schuchardt <xypron.glpk@gmx.de>

arm_ffa: fix: remove deadcode in ffa_print_error_log()

address the CID 464361 Control flow issues [1]

[1]: https://lore.kernel.org/all/20230821210927.GL3953269@bill-the-cat/

Signed-off-by: Abdellatif El Khlifi <abdellatif.elkhlifi@arm.com>
Cc: Tom Rini <trini@konsulko.com>

arm_ffa: use debug logs

replace info logs with debug logs

Signed-off-by: Abdellatif El Khlifi <abdellatif.elkhlifi@arm.com>
Cc: Tom Rini <trini@konsulko.com>
Cc: Simon Glass <sjg@chromium.org>
Reviewed-by: Simon Glass <sjg@chromium.org>

arm_ffa: introduce Arm FF-A support

Add Arm FF-A support implementing Arm Firmware Framework for Armv8-A v1.0

The Firmware Framework for Arm A-profile processors (FF-A v1.0) [1]
describes interfaces (ABIs) that standardize communication
between the Secure World and Normal World leveraging TrustZone
technology.

This driver uses 64-bit registers as per SMCCCv1.2 spec and comes
on top of the SMCCC layer. The driver provides the FF-A ABIs needed for
querying the FF-A framework from the secure world.

The driver uses SMC32 calling convention which means using the first
32-bit data of the Xn registers.

All supported ABIs come with their 32-bit version except FFA_RXTX_MAP
which has 64-bit version supported.

Both 32-bit and 64-bit direct messaging are supported which allows both
32-bit and 64-bit clients to use the FF-A bus.

FF-A is a discoverable bus and similar to architecture features.
FF-A bus is discovered using ARM_SMCCC_FEATURES mechanism performed
by the PSCI driver.

Clients are able to probe then use the FF-A bus by calling the DM class
searching APIs (e.g: uclass_first_device).

The Secure World is considered as one entity to communicate with
using the FF-A bus. FF-A communication is handled by one device and
one instance (the bus). This FF-A driver takes care of all the
interactions between Normal world and Secure World.

The driver exports its operations to be used by upper layers.

Exported operations:

- ffa_partition_info_get
- ffa_sync_send_receive
- ffa_rxtx_unmap

Generic FF-A methods are implemented in the Uclass (arm-ffa-uclass.c).
Arm specific methods are implemented in the Arm driver (arm-ffa.c).

For more details please refer to the driver documentation [2].

[1]: https://developer.arm.com/documentation/den0077/latest/
[2]: doc/arch/arm64.ffa.rst

Signed-off-by: Abdellatif El Khlifi <abdellatif.elkhlifi@arm.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Cc: Tom Rini <trini@konsulko.com>
Cc: Jens Wiklander <jens.wiklander@linaro.org>
Cc: Heinrich Schuchardt <xypron.glpk@gmx.de>

Revert "Merge branch '2023-07-24-introduce-FF-A-suppport'"

This reverts commit d927d1a80843e1c3e2a3f0b8f6150790bef83da1, reversing
changes made to c07ad9520c6190070513016fdb495d4703a4a853.

These changes do not pass CI currently.

Signed-off-by: Tom Rini <trini@konsulko.com>

arm_ffa: introduce Arm FF-A support

Add Arm FF-A support implementing Arm Firmware Framework for Armv8-A v1.0

The Firmware Framework for Arm A-profile processors (FF-A v1.0) [1]
describes interfaces (ABIs) that standardize communication
between the Secure World and Normal World leveraging TrustZone
technology.

This driver uses 64-bit registers as per SMCCCv1.2 spec and comes
on top of the SMCCC layer. The driver provides the FF-A ABIs needed for
querying the FF-A framework from the secure world.

The driver uses SMC32 calling convention which means using the first
32-bit data of the Xn registers.

All supported ABIs come with their 32-bit version except FFA_RXTX_MAP
which has 64-bit version supported.

Both 32-bit and 64-bit direct messaging are supported which allows both
32-bit and 64-bit clients to use the FF-A bus.

FF-A is a discoverable bus and similar to architecture features.
FF-A bus is discovered using ARM_SMCCC_FEATURES mechanism performed
by the PSCI driver.

Clients are able to probe then use the FF-A bus by calling the DM class
searching APIs (e.g: uclass_first_device).

The Secure World is considered as one entity to communicate with
using the FF-A bus. FF-A communication is handled by one device and
one instance (the bus). This FF-A driver takes care of all the
interactions between Normal world and Secure World.

The driver exports its operations to be used by upper layers.

Exported operations:

- ffa_partition_info_get
- ffa_sync_send_receive
- ffa_rxtx_unmap

Generic FF-A methods are implemented in the Uclass (arm-ffa-uclass.c).
Arm specific methods are implemented in the Arm driver (arm-ffa.c).

For more details please refer to the driver documentation [2].

[1]: https://developer.arm.com/documentation/den0077/latest/
[2]: doc/arch/arm64.ffa.rst

Signed-off-by: Abdellatif El Khlifi <abdellatif.elkhlifi@arm.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Cc: Tom Rini <trini@konsulko.com>
Cc: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Cc: Jens Wiklander <jens.wiklander@linaro.org>
Cc: Heinrich Schuchardt <xypron.glpk@gmx.de>

arm_ffa: fix: remove deadcode in ffa_print_error_log()

address the CID 464361 Control flow issues [1]

[1]: https://lore.kernel.org/all/20230821210927.GL3953269@bill-the-cat/

Signed-off-by: Abdellatif El Khlifi <abdellatif.elkhlifi@arm.com>
Cc: Tom Rini <trini@konsulko.com>

arm_ffa: use debug logs

replace info logs with debug logs

Signed-off-by: Abdellatif El Khlifi <abdellatif.elkhlifi@arm.com>
Cc: Tom Rini <trini@konsulko.com>
Cc: Simon Glass <sjg@chromium.org>
Reviewed-by: Simon Glass <sjg@chromium.org>

arm_ffa: introduce Arm FF-A support

Add Arm FF-A support implementing Arm Firmware Framework for Armv8-A v1.0

The Firmware Framework for Arm A-profile processors (FF-A v1.0) [1]
describes interfaces (ABIs) that standardize communication
between the Secure World and Normal World leveraging TrustZone
technology.

This driver uses 64-bit registers as per SMCCCv1.2 spec and comes
on top of the SMCCC layer. The driver provides the FF-A ABIs needed for
querying the FF-A framework from the secure world.

The driver uses SMC32 calling convention which means using the first
32-bit data of the Xn registers.

All supported ABIs come with their 32-bit version except FFA_RXTX_MAP
which has 64-bit version supported.

Both 32-bit and 64-bit direct messaging are supported which allows both
32-bit and 64-bit clients to use the FF-A bus.

FF-A is a discoverable bus and similar to architecture features.
FF-A bus is discovered using ARM_SMCCC_FEATURES mechanism performed
by the PSCI driver.

Clients are able to probe then use the FF-A bus by calling the DM class
searching APIs (e.g: uclass_first_device).

The Secure World is considered as one entity to communicate with
using the FF-A bus. FF-A communication is handled by one device and
one instance (the bus). This FF-A driver takes care of all the
interactions between Normal world and Secure World.

The driver exports its operations to be used by upper layers.

Exported operations:

- ffa_partition_info_get
- ffa_sync_send_receive
- ffa_rxtx_unmap

Generic FF-A methods are implemented in the Uclass (arm-ffa-uclass.c).
Arm specific methods are implemented in the Arm driver (arm-ffa.c).

For more details please refer to the driver documentation [2].

[1]: https://developer.arm.com/documentation/den0077/latest/
[2]: doc/arch/arm64.ffa.rst

Signed-off-by: Abdellatif El Khlifi <abdellatif.elkhlifi@arm.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Cc: Tom Rini <trini@konsulko.com>
Cc: Jens Wiklander <jens.wiklander@linaro.org>
Cc: Heinrich Schuchardt <xypron.glpk@gmx.de>

Revert "Merge branch '2023-07-24-introduce-FF-A-suppport'"

This reverts commit d927d1a80843e1c3e2a3f0b8f6150790bef83da1, reversing
changes made to c07ad9520c6190070513016fdb495d4703a4a853.

These changes do not pass CI currently.

Signed-off-by: Tom Rini <trini@konsulko.com>

arm_ffa: introduce Arm FF-A support

Add Arm FF-A support implementing Arm Firmware Framework for Armv8-A v1.0

The Firmware Framework for Arm A-profile processors (FF-A v1.0) [1]
describes interfaces (ABIs) that standardize communication
between the Secure World and Normal World leveraging TrustZone
technology.

This driver uses 64-bit registers as per SMCCCv1.2 spec and comes
on top of the SMCCC layer. The driver provides the FF-A ABIs needed for
querying the FF-A framework from the secure world.

The driver uses SMC32 calling convention which means using the first
32-bit data of the Xn registers.

All supported ABIs come with their 32-bit version except FFA_RXTX_MAP
which has 64-bit version supported.

Both 32-bit and 64-bit direct messaging are supported which allows both
32-bit and 64-bit clients to use the FF-A bus.

FF-A is a discoverable bus and similar to architecture features.
FF-A bus is discovered using ARM_SMCCC_FEATURES mechanism performed
by the PSCI driver.

Clients are able to probe then use the FF-A bus by calling the DM class
searching APIs (e.g: uclass_first_device).

The Secure World is considered as one entity to communicate with
using the FF-A bus. FF-A communication is handled by one device and
one instance (the bus). This FF-A driver takes care of all the
interactions between Normal world and Secure World.

The driver exports its operations to be used by upper layers.

Exported operations:

- ffa_partition_info_get
- ffa_sync_send_receive
- ffa_rxtx_unmap

Generic FF-A methods are implemented in the Uclass (arm-ffa-uclass.c).
Arm specific methods are implemented in the Arm driver (arm-ffa.c).

For more details please refer to the driver documentation [2].

[1]: https://developer.arm.com/documentation/den0077/latest/
[2]: doc/arch/arm64.ffa.rst

Signed-off-by: Abdellatif El Khlifi <abdellatif.elkhlifi@arm.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Cc: Tom Rini <trini@konsulko.com>
Cc: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Cc: Jens Wiklander <jens.wiklander@linaro.org>
Cc: Heinrich Schuchardt <xypron.glpk@gmx.de>

arm_ffa: fix: remove deadcode in ffa_print_error_log()

address the CID 464361 Control flow issues [1]

[1]: https://lore.kernel.org/all/20230821210927.GL3953269@bill-the-cat/

Signed-off-by: Abdellatif El Khlifi <abdellatif.elkhlifi@arm.com>
Cc: Tom Rini <trini@konsulko.com>

arm_ffa: use debug logs

replace info logs with debug logs

Signed-off-by: Abdellatif El Khlifi <abdellatif.elkhlifi@arm.com>
Cc: Tom Rini <trini@konsulko.com>
Cc: Simon Glass <sjg@chromium.org>
Reviewed-by: Simon Glass <sjg@chromium.org>

arm_ffa: introduce Arm FF-A support

Add Arm FF-A support implementing Arm Firmware Framework for Armv8-A v1.0

The Firmware Framework for Arm A-profile processors (FF-A v1.0) [1]
describes interfaces (ABIs) that standardize communication
between the Secure World and Normal World leveraging TrustZone
technology.

This driver uses 64-bit registers as per SMCCCv1.2 spec and comes
on top of the SMCCC layer. The driver provides the FF-A ABIs needed for
querying the FF-A framework from the secure world.

The driver uses SMC32 calling convention which means using the first
32-bit data of the Xn registers.

All supported ABIs come with their 32-bit version except FFA_RXTX_MAP
which has 64-bit version supported.

Both 32-bit and 64-bit direct messaging are supported which allows both
32-bit and 64-bit clients to use the FF-A bus.

FF-A is a discoverable bus and similar to architecture features.
FF-A bus is discovered using ARM_SMCCC_FEATURES mechanism performed
by the PSCI driver.

Clients are able to probe then use the FF-A bus by calling the DM class
searching APIs (e.g: uclass_first_device).

The Secure World is considered as one entity to communicate with
using the FF-A bus. FF-A communication is handled by one device and
one instance (the bus). This FF-A driver takes care of all the
interactions between Normal world and Secure World.

The driver exports its operations to be used by upper layers.

Exported operations:

- ffa_partition_info_get
- ffa_sync_send_receive
- ffa_rxtx_unmap

Generic FF-A methods are implemented in the Uclass (arm-ffa-uclass.c).
Arm specific methods are implemented in the Arm driver (arm-ffa.c).

For more details please refer to the driver documentation [2].

[1]: https://developer.arm.com/documentation/den0077/latest/
[2]: doc/arch/arm64.ffa.rst

Signed-off-by: Abdellatif El Khlifi <abdellatif.elkhlifi@arm.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Cc: Tom Rini <trini@konsulko.com>
Cc: Jens Wiklander <jens.wiklander@linaro.org>
Cc: Heinrich Schuchardt <xypron.glpk@gmx.de>

Revert "Merge branch '2023-07-24-introduce-FF-A-suppport'"

This reverts commit d927d1a80843e1c3e2a3f0b8f6150790bef83da1, reversing
changes made to c07ad9520c6190070513016fdb495d4703a4a853.

These changes do not pass CI currently.

Signed-off-by: Tom Rini <trini@konsulko.com>