#
d678a59d |
|
18-May-2024 |
Tom Rini <trini@konsulko.com> |
Revert "Merge patch series "arm: dts: am62-beagleplay: Fix Beagleplay Ethernet"" When bringing in the series 'arm: dts: am62-beagleplay: Fix Beagleplay Ethernet"' I failed to notice that b4 noticed it was based on next and so took that as the base commit and merged that part of next to master. This reverts commit c8ffd1356d42223cbb8c86280a083cc3c93e6426, reversing changes made to 2ee6f3a5f7550de3599faef9704e166e5dcace35. Reported-by: Jonas Karlman <jonas@kwiboo.se> Signed-off-by: Tom Rini <trini@konsulko.com> |
#
0cc1f2d8 |
|
01-May-2024 |
Tom Rini <trini@konsulko.com> |
dma: Remove <common.h> and add needed includes Remove <common.h> from this driver directory and when needed add missing include files directly. Signed-off-by: Tom Rini <trini@konsulko.com> |
#
1e94b46f |
|
14-Sep-2023 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/printk.h from common header This old patch was marked as deferred. Bring it back to life, to continue towards the removal of common.h Move this out of the common header and include it only where needed. Signed-off-by: Simon Glass <sjg@chromium.org> |
#
4954937d |
|
12-Oct-2022 |
Michal Suchanek <msuchanek@suse.de> |
dm: treewide: Do not use the return value of simple uclass iterator uclass_first_device/uclass_next_device return value will be removed, don't use it. With the current implementation dev is equivalent to !ret. It is redundant to check both, ret check can be replaced with dev check, and ret check inside the iteration is dead code. Signed-off-by: Michal Suchanek <msuchanek@suse.de> Reviewed-by: Simon Glass <sjg@chromium.org> |
#
b9add641 |
|
06-Oct-2022 |
Andrew Davis <afd@ti.com> |
dma: Transfer dma_ops should use DMA address types DMA operations should function on DMA addresses, not virtual addresses. Although these are usually the same in U-Boot, it is more correct to be explicit with our types here. Signed-off-by: Andrew Davis <afd@ti.com> |
#
c8d2fc75 |
|
06-Oct-2022 |
Andrew Davis <afd@ti.com> |
dma: Use dma-mapping for cache ops and sync after write The DMA'd memory area needs cleaned and invalidated after the DMA write so that any stale cache lines do not mask new data. Signed-off-by: Andrew Davis <afd@ti.com> |
#
46ad7cef |
|
01-Dec-2021 |
Sean Anderson <seanga2@gmail.com> |
treewide: invaild -> invalid Somewhere along the way, someone misspelt "invalid" and it got copied everywhere. Fix it. Signed-off-by: Sean Anderson <seanga2@gmail.com> Reviewed-by: Alexander Dahl <ada@thorsis.com> Reviewed-by: Simon Glass <sjg@chromium.org> |
#
b953ec2b |
|
27-Apr-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
dm: define LOG_CATEGORY for all uclass Define LOG_CATEGORY for all uclass to allow filtering with log command. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: Simon Glass <sjg@chromium.org> |
#
41575d8e |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename auto_alloc_size members to be shorter This construct is quite long-winded. In earlier days it made some sense since auto-allocation was a strange concept. But with driver model now used pretty universally, we can shorten this to 'auto'. This reduces verbosity and makes it easier to read. Coincidentally it also ensures that every declaration is on one line, thus making dtoc's job easier. Signed-off-by: Simon Glass <sjg@chromium.org> |
#
8995a86c |
|
17-Sep-2020 |
Vignesh Raghavendra <vigneshr@ti.com> |
dma: Reduce error level when DMA channel type does not exist Caller would need gracefully handle failures of dma_get_device(), therefore reduce pr_err() to pr_debug() when DMA device is not found. Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com> Reviewed-by: Stefan Roese <sr@denx.de> |
#
f7ae49fc |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop log.h from common header Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org> |
#
90526e9f |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop net.h from common header Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org> |
#
336d4615 |
|
03-Feb-2020 |
Simon Glass <sjg@chromium.org> |
dm: core: Create a new header file for 'compat' features At present dm/device.h includes the linux-compatible features. This requires including linux/compat.h which in turn includes a lot of headers. One of these is malloc.h which we thus end up including in every file in U-Boot. Apart from the inefficiency of this, it is problematic for sandbox which needs to use the system malloc() in some files. Move the compatibility features into a separate header file. Signed-off-by: Simon Glass <sjg@chromium.org> |
#
aae95882 |
|
03-Feb-2020 |
Simon Glass <sjg@chromium.org> |
dma: Rename free() to rfree() This function name conflicts with our desire to #define free() to something else on sandbox. Since it deals with resources, rename it to rfree(). Signed-off-by: Simon Glass <sjg@chromium.org> |
#
b8a4dd28 |
|
04-Dec-2019 |
Vignesh Raghavendra <vigneshr@ti.com> |
dma: Introduce dma_get_cfg() interface Sometimes, there would be a need to exchange data between DMA provider and DMA client which are very specific to DMA driver of the SoC/platform and are not generic enough to be put into struct dma. Therefore, introduce dma_get_cfg() interface to get DMA provider specific data from client device. Clients can use unique configuration ID flags to get different configuration data from DMA driver. Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com> Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com> |
#
1eb69ae4 |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move ARM cache operations out of common.h These functions are CPU-related and do not use driver model. Move them to cpu_func.h Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> Reviewed-by: Tom Rini <trini@konsulko.com> |
#
27ab27f8 |
|
28-Nov-2018 |
Álvaro Fernández Rojas <noltari@gmail.com> |
dma: add channels support This adds channels support for dma controllers that have multiple channels which can transfer data to/from different devices (enet, usb...). DMA channle API: dma_get_by_index() dma_get_by_name() dma_request() dma_free() dma_enable() dma_disable() dma_prepare_rcv_buf() dma_receive() dma_send() Reviewed-by: Tom Rini <trini@konsulko.com> Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> [grygorii.strashko@ti.com: drop unused dma_get_by_index_platdata(), add metadata to send/receive ops, add dma_prepare_rcv_buf(), minor clean up] Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Reviewed-by: Simon Glass <sjg@chromium.org> |
#
10b4dc52 |
|
28-Nov-2018 |
Álvaro Fernández Rojas <noltari@gmail.com> |
dma: move dma_ops to dma-uclass.h Move dma_ops to a separate header file, following other uclass implementations. While doing so, this patch also improves dma_ops documentation. Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> |
#
83d290c5 |
|
06-May-2018 |
Tom Rini <trini@konsulko.com> |
SPDX: Convert all of our single license tags to Linux Kernel style When U-Boot started using SPDX tags we were among the early adopters and there weren't a lot of other examples to borrow from. So we picked the area of the file that usually had a full license text and replaced it with an appropriate SPDX-License-Identifier: entry. Since then, the Linux Kernel has adopted SPDX tags and they place it as the very first line in a file (except where shebangs are used, then it's second line) and with slightly different comment styles than us. In part due to community overlap, in part due to better tag visibility and in part for other minor reasons, switch over to that style. This commit changes all instances where we have a single declared license in the tag as both the before and after are identical in tag contents. There's also a few places where I found we did not have a tag and have introduced one. Signed-off-by: Tom Rini <trini@konsulko.com> |
#
d024236e |
|
18-Apr-2018 |
Tom Rini <trini@konsulko.com> |
Remove unnecessary instances of DECLARE_GLOBAL_DATA_PTR We have a large number of places where while we historically referenced gd in the code we no longer do, as well as cases where the code added that line "just in case" during development and never dropped it. Signed-off-by: Tom Rini <trini@konsulko.com> |
#
9b643e31 |
|
15-Sep-2017 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: replace with error() with pr_err() U-Boot widely uses error() as a bit noisier variant of printf(). This macro causes name conflict with the following line in include/linux/compiler-gcc.h: # define __compiletime_error(message) __attribute__((error(message))) This prevents us from using __compiletime_error(), and makes it difficult to fully sync BUILD_BUG macros with Linux. (Notice Linux's BUILD_BUG_ON_MSG is implemented by using compiletime_assert().) Let's convert error() into now treewide-available pr_err(). Done with the help of Coccinelle, excluing tools/ directory. The semantic patch I used is as follows: // <smpl> @@@@ -error +pr_err (...) // </smpl> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Simon Glass <sjg@chromium.org> [trini: Re-run Coccinelle] Signed-off-by: Tom Rini <trini@konsulko.com> |
#
a0594cef |
|
15-Feb-2016 |
Mugunthan V N <mugunthanvnm@ti.com> |
dm: implement a DMA uclass Implement a DMA uclass so that the devices like ethernet, spi, mmc etc can offload the data transfers from/to the device and memory. Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Jagan Teki <jteki@openedev.com> |
#
0cc1f2d8 |
|
01-May-2024 |
Tom Rini <trini@konsulko.com> |
dma: Remove <common.h> and add needed includes Remove <common.h> from this driver directory and when needed add missing include files directly. Signed-off-by: Tom Rini <trini@konsulko.com> |
#
1e94b46f |
|
14-Sep-2023 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/printk.h from common header This old patch was marked as deferred. Bring it back to life, to continue towards the removal of common.h Move this out of the common header and include it only where needed. Signed-off-by: Simon Glass <sjg@chromium.org> |
#
4954937d |
|
12-Oct-2022 |
Michal Suchanek <msuchanek@suse.de> |
dm: treewide: Do not use the return value of simple uclass iterator uclass_first_device/uclass_next_device return value will be removed, don't use it. With the current implementation dev is equivalent to !ret. It is redundant to check both, ret check can be replaced with dev check, and ret check inside the iteration is dead code. Signed-off-by: Michal Suchanek <msuchanek@suse.de> Reviewed-by: Simon Glass <sjg@chromium.org> |
#
b9add641 |
|
06-Oct-2022 |
Andrew Davis <afd@ti.com> |
dma: Transfer dma_ops should use DMA address types DMA operations should function on DMA addresses, not virtual addresses. Although these are usually the same in U-Boot, it is more correct to be explicit with our types here. Signed-off-by: Andrew Davis <afd@ti.com> |
#
c8d2fc75 |
|
06-Oct-2022 |
Andrew Davis <afd@ti.com> |
dma: Use dma-mapping for cache ops and sync after write The DMA'd memory area needs cleaned and invalidated after the DMA write so that any stale cache lines do not mask new data. Signed-off-by: Andrew Davis <afd@ti.com> |
#
46ad7cef |
|
01-Dec-2021 |
Sean Anderson <seanga2@gmail.com> |
treewide: invaild -> invalid Somewhere along the way, someone misspelt "invalid" and it got copied everywhere. Fix it. Signed-off-by: Sean Anderson <seanga2@gmail.com> Reviewed-by: Alexander Dahl <ada@thorsis.com> Reviewed-by: Simon Glass <sjg@chromium.org> |
#
b953ec2b |
|
27-Apr-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
dm: define LOG_CATEGORY for all uclass Define LOG_CATEGORY for all uclass to allow filtering with log command. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: Simon Glass <sjg@chromium.org> |
#
41575d8e |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename auto_alloc_size members to be shorter This construct is quite long-winded. In earlier days it made some sense since auto-allocation was a strange concept. But with driver model now used pretty universally, we can shorten this to 'auto'. This reduces verbosity and makes it easier to read. Coincidentally it also ensures that every declaration is on one line, thus making dtoc's job easier. Signed-off-by: Simon Glass <sjg@chromium.org> |
#
8995a86c |
|
17-Sep-2020 |
Vignesh Raghavendra <vigneshr@ti.com> |
dma: Reduce error level when DMA channel type does not exist Caller would need gracefully handle failures of dma_get_device(), therefore reduce pr_err() to pr_debug() when DMA device is not found. Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com> Reviewed-by: Stefan Roese <sr@denx.de> |
#
f7ae49fc |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop log.h from common header Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org> |
#
90526e9f |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop net.h from common header Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org> |
#
336d4615 |
|
03-Feb-2020 |
Simon Glass <sjg@chromium.org> |
dm: core: Create a new header file for 'compat' features At present dm/device.h includes the linux-compatible features. This requires including linux/compat.h which in turn includes a lot of headers. One of these is malloc.h which we thus end up including in every file in U-Boot. Apart from the inefficiency of this, it is problematic for sandbox which needs to use the system malloc() in some files. Move the compatibility features into a separate header file. Signed-off-by: Simon Glass <sjg@chromium.org> |
#
aae95882 |
|
03-Feb-2020 |
Simon Glass <sjg@chromium.org> |
dma: Rename free() to rfree() This function name conflicts with our desire to #define free() to something else on sandbox. Since it deals with resources, rename it to rfree(). Signed-off-by: Simon Glass <sjg@chromium.org> |
#
b8a4dd28 |
|
04-Dec-2019 |
Vignesh Raghavendra <vigneshr@ti.com> |
dma: Introduce dma_get_cfg() interface Sometimes, there would be a need to exchange data between DMA provider and DMA client which are very specific to DMA driver of the SoC/platform and are not generic enough to be put into struct dma. Therefore, introduce dma_get_cfg() interface to get DMA provider specific data from client device. Clients can use unique configuration ID flags to get different configuration data from DMA driver. Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com> Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com> |
#
1eb69ae4 |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move ARM cache operations out of common.h These functions are CPU-related and do not use driver model. Move them to cpu_func.h Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> Reviewed-by: Tom Rini <trini@konsulko.com> |
#
27ab27f8 |
|
28-Nov-2018 |
Álvaro Fernández Rojas <noltari@gmail.com> |
dma: add channels support This adds channels support for dma controllers that have multiple channels which can transfer data to/from different devices (enet, usb...). DMA channle API: dma_get_by_index() dma_get_by_name() dma_request() dma_free() dma_enable() dma_disable() dma_prepare_rcv_buf() dma_receive() dma_send() Reviewed-by: Tom Rini <trini@konsulko.com> Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> [grygorii.strashko@ti.com: drop unused dma_get_by_index_platdata(), add metadata to send/receive ops, add dma_prepare_rcv_buf(), minor clean up] Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Reviewed-by: Simon Glass <sjg@chromium.org> |
#
10b4dc52 |
|
28-Nov-2018 |
Álvaro Fernández Rojas <noltari@gmail.com> |
dma: move dma_ops to dma-uclass.h Move dma_ops to a separate header file, following other uclass implementations. While doing so, this patch also improves dma_ops documentation. Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> |
#
83d290c5 |
|
06-May-2018 |
Tom Rini <trini@konsulko.com> |
SPDX: Convert all of our single license tags to Linux Kernel style When U-Boot started using SPDX tags we were among the early adopters and there weren't a lot of other examples to borrow from. So we picked the area of the file that usually had a full license text and replaced it with an appropriate SPDX-License-Identifier: entry. Since then, the Linux Kernel has adopted SPDX tags and they place it as the very first line in a file (except where shebangs are used, then it's second line) and with slightly different comment styles than us. In part due to community overlap, in part due to better tag visibility and in part for other minor reasons, switch over to that style. This commit changes all instances where we have a single declared license in the tag as both the before and after are identical in tag contents. There's also a few places where I found we did not have a tag and have introduced one. Signed-off-by: Tom Rini <trini@konsulko.com> |
#
d024236e |
|
18-Apr-2018 |
Tom Rini <trini@konsulko.com> |
Remove unnecessary instances of DECLARE_GLOBAL_DATA_PTR We have a large number of places where while we historically referenced gd in the code we no longer do, as well as cases where the code added that line "just in case" during development and never dropped it. Signed-off-by: Tom Rini <trini@konsulko.com> |
#
9b643e31 |
|
15-Sep-2017 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: replace with error() with pr_err() U-Boot widely uses error() as a bit noisier variant of printf(). This macro causes name conflict with the following line in include/linux/compiler-gcc.h: # define __compiletime_error(message) __attribute__((error(message))) This prevents us from using __compiletime_error(), and makes it difficult to fully sync BUILD_BUG macros with Linux. (Notice Linux's BUILD_BUG_ON_MSG is implemented by using compiletime_assert().) Let's convert error() into now treewide-available pr_err(). Done with the help of Coccinelle, excluing tools/ directory. The semantic patch I used is as follows: // <smpl> @@@@ -error +pr_err (...) // </smpl> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Simon Glass <sjg@chromium.org> [trini: Re-run Coccinelle] Signed-off-by: Tom Rini <trini@konsulko.com> |
#
a0594cef |
|
15-Feb-2016 |
Mugunthan V N <mugunthanvnm@ti.com> |
dm: implement a DMA uclass Implement a DMA uclass so that the devices like ethernet, spi, mmc etc can offload the data transfers from/to the device and memory. Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Jagan Teki <jteki@openedev.com> |
#
1e94b46f |
|
14-Sep-2023 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/printk.h from common header This old patch was marked as deferred. Bring it back to life, to continue towards the removal of common.h Move this out of the common header and include it only where needed. Signed-off-by: Simon Glass <sjg@chromium.org> |
#
4954937d |
|
12-Oct-2022 |
Michal Suchanek <msuchanek@suse.de> |
dm: treewide: Do not use the return value of simple uclass iterator uclass_first_device/uclass_next_device return value will be removed, don't use it. With the current implementation dev is equivalent to !ret. It is redundant to check both, ret check can be replaced with dev check, and ret check inside the iteration is dead code. Signed-off-by: Michal Suchanek <msuchanek@suse.de> Reviewed-by: Simon Glass <sjg@chromium.org> |
#
b9add641 |
|
06-Oct-2022 |
Andrew Davis <afd@ti.com> |
dma: Transfer dma_ops should use DMA address types DMA operations should function on DMA addresses, not virtual addresses. Although these are usually the same in U-Boot, it is more correct to be explicit with our types here. Signed-off-by: Andrew Davis <afd@ti.com> |
#
c8d2fc75 |
|
06-Oct-2022 |
Andrew Davis <afd@ti.com> |
dma: Use dma-mapping for cache ops and sync after write The DMA'd memory area needs cleaned and invalidated after the DMA write so that any stale cache lines do not mask new data. Signed-off-by: Andrew Davis <afd@ti.com> |
#
46ad7cef |
|
01-Dec-2021 |
Sean Anderson <seanga2@gmail.com> |
treewide: invaild -> invalid Somewhere along the way, someone misspelt "invalid" and it got copied everywhere. Fix it. Signed-off-by: Sean Anderson <seanga2@gmail.com> Reviewed-by: Alexander Dahl <ada@thorsis.com> Reviewed-by: Simon Glass <sjg@chromium.org> |
#
b953ec2b |
|
27-Apr-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
dm: define LOG_CATEGORY for all uclass Define LOG_CATEGORY for all uclass to allow filtering with log command. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: Simon Glass <sjg@chromium.org> |
#
41575d8e |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename auto_alloc_size members to be shorter This construct is quite long-winded. In earlier days it made some sense since auto-allocation was a strange concept. But with driver model now used pretty universally, we can shorten this to 'auto'. This reduces verbosity and makes it easier to read. Coincidentally it also ensures that every declaration is on one line, thus making dtoc's job easier. Signed-off-by: Simon Glass <sjg@chromium.org> |
#
8995a86c |
|
17-Sep-2020 |
Vignesh Raghavendra <vigneshr@ti.com> |
dma: Reduce error level when DMA channel type does not exist Caller would need gracefully handle failures of dma_get_device(), therefore reduce pr_err() to pr_debug() when DMA device is not found. Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com> Reviewed-by: Stefan Roese <sr@denx.de> |
#
f7ae49fc |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop log.h from common header Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org> |
#
90526e9f |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop net.h from common header Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org> |
#
336d4615 |
|
03-Feb-2020 |
Simon Glass <sjg@chromium.org> |
dm: core: Create a new header file for 'compat' features At present dm/device.h includes the linux-compatible features. This requires including linux/compat.h which in turn includes a lot of headers. One of these is malloc.h which we thus end up including in every file in U-Boot. Apart from the inefficiency of this, it is problematic for sandbox which needs to use the system malloc() in some files. Move the compatibility features into a separate header file. Signed-off-by: Simon Glass <sjg@chromium.org> |
#
aae95882 |
|
03-Feb-2020 |
Simon Glass <sjg@chromium.org> |
dma: Rename free() to rfree() This function name conflicts with our desire to #define free() to something else on sandbox. Since it deals with resources, rename it to rfree(). Signed-off-by: Simon Glass <sjg@chromium.org> |
#
b8a4dd28 |
|
04-Dec-2019 |
Vignesh Raghavendra <vigneshr@ti.com> |
dma: Introduce dma_get_cfg() interface Sometimes, there would be a need to exchange data between DMA provider and DMA client which are very specific to DMA driver of the SoC/platform and are not generic enough to be put into struct dma. Therefore, introduce dma_get_cfg() interface to get DMA provider specific data from client device. Clients can use unique configuration ID flags to get different configuration data from DMA driver. Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com> Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com> |
#
1eb69ae4 |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move ARM cache operations out of common.h These functions are CPU-related and do not use driver model. Move them to cpu_func.h Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> Reviewed-by: Tom Rini <trini@konsulko.com> |
#
27ab27f8 |
|
28-Nov-2018 |
Álvaro Fernández Rojas <noltari@gmail.com> |
dma: add channels support This adds channels support for dma controllers that have multiple channels which can transfer data to/from different devices (enet, usb...). DMA channle API: dma_get_by_index() dma_get_by_name() dma_request() dma_free() dma_enable() dma_disable() dma_prepare_rcv_buf() dma_receive() dma_send() Reviewed-by: Tom Rini <trini@konsulko.com> Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> [grygorii.strashko@ti.com: drop unused dma_get_by_index_platdata(), add metadata to send/receive ops, add dma_prepare_rcv_buf(), minor clean up] Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Reviewed-by: Simon Glass <sjg@chromium.org> |
#
10b4dc52 |
|
28-Nov-2018 |
Álvaro Fernández Rojas <noltari@gmail.com> |
dma: move dma_ops to dma-uclass.h Move dma_ops to a separate header file, following other uclass implementations. While doing so, this patch also improves dma_ops documentation. Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> |
#
83d290c5 |
|
06-May-2018 |
Tom Rini <trini@konsulko.com> |
SPDX: Convert all of our single license tags to Linux Kernel style When U-Boot started using SPDX tags we were among the early adopters and there weren't a lot of other examples to borrow from. So we picked the area of the file that usually had a full license text and replaced it with an appropriate SPDX-License-Identifier: entry. Since then, the Linux Kernel has adopted SPDX tags and they place it as the very first line in a file (except where shebangs are used, then it's second line) and with slightly different comment styles than us. In part due to community overlap, in part due to better tag visibility and in part for other minor reasons, switch over to that style. This commit changes all instances where we have a single declared license in the tag as both the before and after are identical in tag contents. There's also a few places where I found we did not have a tag and have introduced one. Signed-off-by: Tom Rini <trini@konsulko.com> |
#
d024236e |
|
18-Apr-2018 |
Tom Rini <trini@konsulko.com> |
Remove unnecessary instances of DECLARE_GLOBAL_DATA_PTR We have a large number of places where while we historically referenced gd in the code we no longer do, as well as cases where the code added that line "just in case" during development and never dropped it. Signed-off-by: Tom Rini <trini@konsulko.com> |
#
9b643e31 |
|
15-Sep-2017 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: replace with error() with pr_err() U-Boot widely uses error() as a bit noisier variant of printf(). This macro causes name conflict with the following line in include/linux/compiler-gcc.h: # define __compiletime_error(message) __attribute__((error(message))) This prevents us from using __compiletime_error(), and makes it difficult to fully sync BUILD_BUG macros with Linux. (Notice Linux's BUILD_BUG_ON_MSG is implemented by using compiletime_assert().) Let's convert error() into now treewide-available pr_err(). Done with the help of Coccinelle, excluing tools/ directory. The semantic patch I used is as follows: // <smpl> @@@@ -error +pr_err (...) // </smpl> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Simon Glass <sjg@chromium.org> [trini: Re-run Coccinelle] Signed-off-by: Tom Rini <trini@konsulko.com> |
#
a0594cef |
|
15-Feb-2016 |
Mugunthan V N <mugunthanvnm@ti.com> |
dm: implement a DMA uclass Implement a DMA uclass so that the devices like ethernet, spi, mmc etc can offload the data transfers from/to the device and memory. Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Jagan Teki <jteki@openedev.com> |
#
4954937d |
|
12-Oct-2022 |
Michal Suchanek <msuchanek@suse.de> |
dm: treewide: Do not use the return value of simple uclass iterator uclass_first_device/uclass_next_device return value will be removed, don't use it. With the current implementation dev is equivalent to !ret. It is redundant to check both, ret check can be replaced with dev check, and ret check inside the iteration is dead code. Signed-off-by: Michal Suchanek <msuchanek@suse.de> Reviewed-by: Simon Glass <sjg@chromium.org> |
#
b9add641 |
|
06-Oct-2022 |
Andrew Davis <afd@ti.com> |
dma: Transfer dma_ops should use DMA address types DMA operations should function on DMA addresses, not virtual addresses. Although these are usually the same in U-Boot, it is more correct to be explicit with our types here. Signed-off-by: Andrew Davis <afd@ti.com> |
#
c8d2fc75 |
|
06-Oct-2022 |
Andrew Davis <afd@ti.com> |
dma: Use dma-mapping for cache ops and sync after write The DMA'd memory area needs cleaned and invalidated after the DMA write so that any stale cache lines do not mask new data. Signed-off-by: Andrew Davis <afd@ti.com> |
#
46ad7cef |
|
01-Dec-2021 |
Sean Anderson <seanga2@gmail.com> |
treewide: invaild -> invalid Somewhere along the way, someone misspelt "invalid" and it got copied everywhere. Fix it. Signed-off-by: Sean Anderson <seanga2@gmail.com> Reviewed-by: Alexander Dahl <ada@thorsis.com> Reviewed-by: Simon Glass <sjg@chromium.org> |
#
b953ec2b |
|
27-Apr-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
dm: define LOG_CATEGORY for all uclass Define LOG_CATEGORY for all uclass to allow filtering with log command. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: Simon Glass <sjg@chromium.org> |
#
41575d8e |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename auto_alloc_size members to be shorter This construct is quite long-winded. In earlier days it made some sense since auto-allocation was a strange concept. But with driver model now used pretty universally, we can shorten this to 'auto'. This reduces verbosity and makes it easier to read. Coincidentally it also ensures that every declaration is on one line, thus making dtoc's job easier. Signed-off-by: Simon Glass <sjg@chromium.org> |
#
8995a86c |
|
17-Sep-2020 |
Vignesh Raghavendra <vigneshr@ti.com> |
dma: Reduce error level when DMA channel type does not exist Caller would need gracefully handle failures of dma_get_device(), therefore reduce pr_err() to pr_debug() when DMA device is not found. Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com> Reviewed-by: Stefan Roese <sr@denx.de> |
#
f7ae49fc |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop log.h from common header Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org> |
#
90526e9f |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop net.h from common header Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org> |
#
336d4615 |
|
03-Feb-2020 |
Simon Glass <sjg@chromium.org> |
dm: core: Create a new header file for 'compat' features At present dm/device.h includes the linux-compatible features. This requires including linux/compat.h which in turn includes a lot of headers. One of these is malloc.h which we thus end up including in every file in U-Boot. Apart from the inefficiency of this, it is problematic for sandbox which needs to use the system malloc() in some files. Move the compatibility features into a separate header file. Signed-off-by: Simon Glass <sjg@chromium.org> |
#
aae95882 |
|
03-Feb-2020 |
Simon Glass <sjg@chromium.org> |
dma: Rename free() to rfree() This function name conflicts with our desire to #define free() to something else on sandbox. Since it deals with resources, rename it to rfree(). Signed-off-by: Simon Glass <sjg@chromium.org> |
#
b8a4dd28 |
|
04-Dec-2019 |
Vignesh Raghavendra <vigneshr@ti.com> |
dma: Introduce dma_get_cfg() interface Sometimes, there would be a need to exchange data between DMA provider and DMA client which are very specific to DMA driver of the SoC/platform and are not generic enough to be put into struct dma. Therefore, introduce dma_get_cfg() interface to get DMA provider specific data from client device. Clients can use unique configuration ID flags to get different configuration data from DMA driver. Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com> Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com> |
#
1eb69ae4 |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move ARM cache operations out of common.h These functions are CPU-related and do not use driver model. Move them to cpu_func.h Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> Reviewed-by: Tom Rini <trini@konsulko.com> |
#
27ab27f8 |
|
28-Nov-2018 |
Álvaro Fernández Rojas <noltari@gmail.com> |
dma: add channels support This adds channels support for dma controllers that have multiple channels which can transfer data to/from different devices (enet, usb...). DMA channle API: dma_get_by_index() dma_get_by_name() dma_request() dma_free() dma_enable() dma_disable() dma_prepare_rcv_buf() dma_receive() dma_send() Reviewed-by: Tom Rini <trini@konsulko.com> Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> [grygorii.strashko@ti.com: drop unused dma_get_by_index_platdata(), add metadata to send/receive ops, add dma_prepare_rcv_buf(), minor clean up] Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Reviewed-by: Simon Glass <sjg@chromium.org> |
#
10b4dc52 |
|
28-Nov-2018 |
Álvaro Fernández Rojas <noltari@gmail.com> |
dma: move dma_ops to dma-uclass.h Move dma_ops to a separate header file, following other uclass implementations. While doing so, this patch also improves dma_ops documentation. Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> |
#
83d290c5 |
|
06-May-2018 |
Tom Rini <trini@konsulko.com> |
SPDX: Convert all of our single license tags to Linux Kernel style When U-Boot started using SPDX tags we were among the early adopters and there weren't a lot of other examples to borrow from. So we picked the area of the file that usually had a full license text and replaced it with an appropriate SPDX-License-Identifier: entry. Since then, the Linux Kernel has adopted SPDX tags and they place it as the very first line in a file (except where shebangs are used, then it's second line) and with slightly different comment styles than us. In part due to community overlap, in part due to better tag visibility and in part for other minor reasons, switch over to that style. This commit changes all instances where we have a single declared license in the tag as both the before and after are identical in tag contents. There's also a few places where I found we did not have a tag and have introduced one. Signed-off-by: Tom Rini <trini@konsulko.com> |
#
d024236e |
|
18-Apr-2018 |
Tom Rini <trini@konsulko.com> |
Remove unnecessary instances of DECLARE_GLOBAL_DATA_PTR We have a large number of places where while we historically referenced gd in the code we no longer do, as well as cases where the code added that line "just in case" during development and never dropped it. Signed-off-by: Tom Rini <trini@konsulko.com> |
#
9b643e31 |
|
15-Sep-2017 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: replace with error() with pr_err() U-Boot widely uses error() as a bit noisier variant of printf(). This macro causes name conflict with the following line in include/linux/compiler-gcc.h: # define __compiletime_error(message) __attribute__((error(message))) This prevents us from using __compiletime_error(), and makes it difficult to fully sync BUILD_BUG macros with Linux. (Notice Linux's BUILD_BUG_ON_MSG is implemented by using compiletime_assert().) Let's convert error() into now treewide-available pr_err(). Done with the help of Coccinelle, excluing tools/ directory. The semantic patch I used is as follows: // <smpl> @@@@ -error +pr_err (...) // </smpl> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Simon Glass <sjg@chromium.org> [trini: Re-run Coccinelle] Signed-off-by: Tom Rini <trini@konsulko.com> |
#
a0594cef |
|
15-Feb-2016 |
Mugunthan V N <mugunthanvnm@ti.com> |
dm: implement a DMA uclass Implement a DMA uclass so that the devices like ethernet, spi, mmc etc can offload the data transfers from/to the device and memory. Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Jagan Teki <jteki@openedev.com> |
#
b9add641 |
|
06-Oct-2022 |
Andrew Davis <afd@ti.com> |
dma: Transfer dma_ops should use DMA address types DMA operations should function on DMA addresses, not virtual addresses. Although these are usually the same in U-Boot, it is more correct to be explicit with our types here. Signed-off-by: Andrew Davis <afd@ti.com> |
#
c8d2fc75 |
|
06-Oct-2022 |
Andrew Davis <afd@ti.com> |
dma: Use dma-mapping for cache ops and sync after write The DMA'd memory area needs cleaned and invalidated after the DMA write so that any stale cache lines do not mask new data. Signed-off-by: Andrew Davis <afd@ti.com> |
#
46ad7cef |
|
01-Dec-2021 |
Sean Anderson <seanga2@gmail.com> |
treewide: invaild -> invalid Somewhere along the way, someone misspelt "invalid" and it got copied everywhere. Fix it. Signed-off-by: Sean Anderson <seanga2@gmail.com> Reviewed-by: Alexander Dahl <ada@thorsis.com> Reviewed-by: Simon Glass <sjg@chromium.org> |
#
b953ec2b |
|
27-Apr-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
dm: define LOG_CATEGORY for all uclass Define LOG_CATEGORY for all uclass to allow filtering with log command. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: Simon Glass <sjg@chromium.org> |
#
41575d8e |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename auto_alloc_size members to be shorter This construct is quite long-winded. In earlier days it made some sense since auto-allocation was a strange concept. But with driver model now used pretty universally, we can shorten this to 'auto'. This reduces verbosity and makes it easier to read. Coincidentally it also ensures that every declaration is on one line, thus making dtoc's job easier. Signed-off-by: Simon Glass <sjg@chromium.org> |
#
8995a86c |
|
17-Sep-2020 |
Vignesh Raghavendra <vigneshr@ti.com> |
dma: Reduce error level when DMA channel type does not exist Caller would need gracefully handle failures of dma_get_device(), therefore reduce pr_err() to pr_debug() when DMA device is not found. Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com> Reviewed-by: Stefan Roese <sr@denx.de> |
#
f7ae49fc |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop log.h from common header Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org> |
#
90526e9f |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop net.h from common header Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org> |
#
336d4615 |
|
03-Feb-2020 |
Simon Glass <sjg@chromium.org> |
dm: core: Create a new header file for 'compat' features At present dm/device.h includes the linux-compatible features. This requires including linux/compat.h which in turn includes a lot of headers. One of these is malloc.h which we thus end up including in every file in U-Boot. Apart from the inefficiency of this, it is problematic for sandbox which needs to use the system malloc() in some files. Move the compatibility features into a separate header file. Signed-off-by: Simon Glass <sjg@chromium.org> |
#
aae95882 |
|
03-Feb-2020 |
Simon Glass <sjg@chromium.org> |
dma: Rename free() to rfree() This function name conflicts with our desire to #define free() to something else on sandbox. Since it deals with resources, rename it to rfree(). Signed-off-by: Simon Glass <sjg@chromium.org> |
#
b8a4dd28 |
|
04-Dec-2019 |
Vignesh Raghavendra <vigneshr@ti.com> |
dma: Introduce dma_get_cfg() interface Sometimes, there would be a need to exchange data between DMA provider and DMA client which are very specific to DMA driver of the SoC/platform and are not generic enough to be put into struct dma. Therefore, introduce dma_get_cfg() interface to get DMA provider specific data from client device. Clients can use unique configuration ID flags to get different configuration data from DMA driver. Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com> Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com> |
#
1eb69ae4 |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move ARM cache operations out of common.h These functions are CPU-related and do not use driver model. Move them to cpu_func.h Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> Reviewed-by: Tom Rini <trini@konsulko.com> |
#
27ab27f8 |
|
28-Nov-2018 |
Álvaro Fernández Rojas <noltari@gmail.com> |
dma: add channels support This adds channels support for dma controllers that have multiple channels which can transfer data to/from different devices (enet, usb...). DMA channle API: dma_get_by_index() dma_get_by_name() dma_request() dma_free() dma_enable() dma_disable() dma_prepare_rcv_buf() dma_receive() dma_send() Reviewed-by: Tom Rini <trini@konsulko.com> Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> [grygorii.strashko@ti.com: drop unused dma_get_by_index_platdata(), add metadata to send/receive ops, add dma_prepare_rcv_buf(), minor clean up] Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Reviewed-by: Simon Glass <sjg@chromium.org> |
#
10b4dc52 |
|
28-Nov-2018 |
Álvaro Fernández Rojas <noltari@gmail.com> |
dma: move dma_ops to dma-uclass.h Move dma_ops to a separate header file, following other uclass implementations. While doing so, this patch also improves dma_ops documentation. Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> |
#
83d290c5 |
|
06-May-2018 |
Tom Rini <trini@konsulko.com> |
SPDX: Convert all of our single license tags to Linux Kernel style When U-Boot started using SPDX tags we were among the early adopters and there weren't a lot of other examples to borrow from. So we picked the area of the file that usually had a full license text and replaced it with an appropriate SPDX-License-Identifier: entry. Since then, the Linux Kernel has adopted SPDX tags and they place it as the very first line in a file (except where shebangs are used, then it's second line) and with slightly different comment styles than us. In part due to community overlap, in part due to better tag visibility and in part for other minor reasons, switch over to that style. This commit changes all instances where we have a single declared license in the tag as both the before and after are identical in tag contents. There's also a few places where I found we did not have a tag and have introduced one. Signed-off-by: Tom Rini <trini@konsulko.com> |
#
d024236e |
|
18-Apr-2018 |
Tom Rini <trini@konsulko.com> |
Remove unnecessary instances of DECLARE_GLOBAL_DATA_PTR We have a large number of places where while we historically referenced gd in the code we no longer do, as well as cases where the code added that line "just in case" during development and never dropped it. Signed-off-by: Tom Rini <trini@konsulko.com> |
#
9b643e31 |
|
15-Sep-2017 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: replace with error() with pr_err() U-Boot widely uses error() as a bit noisier variant of printf(). This macro causes name conflict with the following line in include/linux/compiler-gcc.h: # define __compiletime_error(message) __attribute__((error(message))) This prevents us from using __compiletime_error(), and makes it difficult to fully sync BUILD_BUG macros with Linux. (Notice Linux's BUILD_BUG_ON_MSG is implemented by using compiletime_assert().) Let's convert error() into now treewide-available pr_err(). Done with the help of Coccinelle, excluing tools/ directory. The semantic patch I used is as follows: // <smpl> @@@@ -error +pr_err (...) // </smpl> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Simon Glass <sjg@chromium.org> [trini: Re-run Coccinelle] Signed-off-by: Tom Rini <trini@konsulko.com> |
#
a0594cef |
|
15-Feb-2016 |
Mugunthan V N <mugunthanvnm@ti.com> |
dm: implement a DMA uclass Implement a DMA uclass so that the devices like ethernet, spi, mmc etc can offload the data transfers from/to the device and memory. Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Jagan Teki <jteki@openedev.com> |
#
46ad7cef |
|
01-Dec-2021 |
Sean Anderson <seanga2@gmail.com> |
treewide: invaild -> invalid Somewhere along the way, someone misspelt "invalid" and it got copied everywhere. Fix it. Signed-off-by: Sean Anderson <seanga2@gmail.com> Reviewed-by: Alexander Dahl <ada@thorsis.com> Reviewed-by: Simon Glass <sjg@chromium.org> |
#
b953ec2b |
|
27-Apr-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
dm: define LOG_CATEGORY for all uclass Define LOG_CATEGORY for all uclass to allow filtering with log command. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: Simon Glass <sjg@chromium.org> |
#
41575d8e |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename auto_alloc_size members to be shorter This construct is quite long-winded. In earlier days it made some sense since auto-allocation was a strange concept. But with driver model now used pretty universally, we can shorten this to 'auto'. This reduces verbosity and makes it easier to read. Coincidentally it also ensures that every declaration is on one line, thus making dtoc's job easier. Signed-off-by: Simon Glass <sjg@chromium.org> |
#
8995a86c |
|
17-Sep-2020 |
Vignesh Raghavendra <vigneshr@ti.com> |
dma: Reduce error level when DMA channel type does not exist Caller would need gracefully handle failures of dma_get_device(), therefore reduce pr_err() to pr_debug() when DMA device is not found. Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com> Reviewed-by: Stefan Roese <sr@denx.de> |
#
f7ae49fc |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop log.h from common header Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org> |
#
90526e9f |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop net.h from common header Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org> |
#
336d4615 |
|
03-Feb-2020 |
Simon Glass <sjg@chromium.org> |
dm: core: Create a new header file for 'compat' features At present dm/device.h includes the linux-compatible features. This requires including linux/compat.h which in turn includes a lot of headers. One of these is malloc.h which we thus end up including in every file in U-Boot. Apart from the inefficiency of this, it is problematic for sandbox which needs to use the system malloc() in some files. Move the compatibility features into a separate header file. Signed-off-by: Simon Glass <sjg@chromium.org> |
#
aae95882 |
|
03-Feb-2020 |
Simon Glass <sjg@chromium.org> |
dma: Rename free() to rfree() This function name conflicts with our desire to #define free() to something else on sandbox. Since it deals with resources, rename it to rfree(). Signed-off-by: Simon Glass <sjg@chromium.org> |
#
b8a4dd28 |
|
04-Dec-2019 |
Vignesh Raghavendra <vigneshr@ti.com> |
dma: Introduce dma_get_cfg() interface Sometimes, there would be a need to exchange data between DMA provider and DMA client which are very specific to DMA driver of the SoC/platform and are not generic enough to be put into struct dma. Therefore, introduce dma_get_cfg() interface to get DMA provider specific data from client device. Clients can use unique configuration ID flags to get different configuration data from DMA driver. Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com> Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com> |
#
1eb69ae4 |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move ARM cache operations out of common.h These functions are CPU-related and do not use driver model. Move them to cpu_func.h Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> Reviewed-by: Tom Rini <trini@konsulko.com> |
#
27ab27f8 |
|
28-Nov-2018 |
Álvaro Fernández Rojas <noltari@gmail.com> |
dma: add channels support This adds channels support for dma controllers that have multiple channels which can transfer data to/from different devices (enet, usb...). DMA channle API: dma_get_by_index() dma_get_by_name() dma_request() dma_free() dma_enable() dma_disable() dma_prepare_rcv_buf() dma_receive() dma_send() Reviewed-by: Tom Rini <trini@konsulko.com> Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> [grygorii.strashko@ti.com: drop unused dma_get_by_index_platdata(), add metadata to send/receive ops, add dma_prepare_rcv_buf(), minor clean up] Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Reviewed-by: Simon Glass <sjg@chromium.org> |
#
10b4dc52 |
|
28-Nov-2018 |
Álvaro Fernández Rojas <noltari@gmail.com> |
dma: move dma_ops to dma-uclass.h Move dma_ops to a separate header file, following other uclass implementations. While doing so, this patch also improves dma_ops documentation. Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> |
#
83d290c5 |
|
06-May-2018 |
Tom Rini <trini@konsulko.com> |
SPDX: Convert all of our single license tags to Linux Kernel style When U-Boot started using SPDX tags we were among the early adopters and there weren't a lot of other examples to borrow from. So we picked the area of the file that usually had a full license text and replaced it with an appropriate SPDX-License-Identifier: entry. Since then, the Linux Kernel has adopted SPDX tags and they place it as the very first line in a file (except where shebangs are used, then it's second line) and with slightly different comment styles than us. In part due to community overlap, in part due to better tag visibility and in part for other minor reasons, switch over to that style. This commit changes all instances where we have a single declared license in the tag as both the before and after are identical in tag contents. There's also a few places where I found we did not have a tag and have introduced one. Signed-off-by: Tom Rini <trini@konsulko.com> |
#
d024236e |
|
18-Apr-2018 |
Tom Rini <trini@konsulko.com> |
Remove unnecessary instances of DECLARE_GLOBAL_DATA_PTR We have a large number of places where while we historically referenced gd in the code we no longer do, as well as cases where the code added that line "just in case" during development and never dropped it. Signed-off-by: Tom Rini <trini@konsulko.com> |
#
9b643e31 |
|
15-Sep-2017 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: replace with error() with pr_err() U-Boot widely uses error() as a bit noisier variant of printf(). This macro causes name conflict with the following line in include/linux/compiler-gcc.h: # define __compiletime_error(message) __attribute__((error(message))) This prevents us from using __compiletime_error(), and makes it difficult to fully sync BUILD_BUG macros with Linux. (Notice Linux's BUILD_BUG_ON_MSG is implemented by using compiletime_assert().) Let's convert error() into now treewide-available pr_err(). Done with the help of Coccinelle, excluing tools/ directory. The semantic patch I used is as follows: // <smpl> @@@@ -error +pr_err (...) // </smpl> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Simon Glass <sjg@chromium.org> [trini: Re-run Coccinelle] Signed-off-by: Tom Rini <trini@konsulko.com> |
#
a0594cef |
|
15-Feb-2016 |
Mugunthan V N <mugunthanvnm@ti.com> |
dm: implement a DMA uclass Implement a DMA uclass so that the devices like ethernet, spi, mmc etc can offload the data transfers from/to the device and memory. Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Jagan Teki <jteki@openedev.com> |
#
b953ec2b |
|
27-Apr-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
dm: define LOG_CATEGORY for all uclass Define LOG_CATEGORY for all uclass to allow filtering with log command. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: Simon Glass <sjg@chromium.org> |
#
41575d8e |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename auto_alloc_size members to be shorter This construct is quite long-winded. In earlier days it made some sense since auto-allocation was a strange concept. But with driver model now used pretty universally, we can shorten this to 'auto'. This reduces verbosity and makes it easier to read. Coincidentally it also ensures that every declaration is on one line, thus making dtoc's job easier. Signed-off-by: Simon Glass <sjg@chromium.org> |
#
8995a86c |
|
17-Sep-2020 |
Vignesh Raghavendra <vigneshr@ti.com> |
dma: Reduce error level when DMA channel type does not exist Caller would need gracefully handle failures of dma_get_device(), therefore reduce pr_err() to pr_debug() when DMA device is not found. Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com> Reviewed-by: Stefan Roese <sr@denx.de> |
#
f7ae49fc |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop log.h from common header Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org> |
#
90526e9f |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop net.h from common header Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org> |
#
336d4615 |
|
03-Feb-2020 |
Simon Glass <sjg@chromium.org> |
dm: core: Create a new header file for 'compat' features At present dm/device.h includes the linux-compatible features. This requires including linux/compat.h which in turn includes a lot of headers. One of these is malloc.h which we thus end up including in every file in U-Boot. Apart from the inefficiency of this, it is problematic for sandbox which needs to use the system malloc() in some files. Move the compatibility features into a separate header file. Signed-off-by: Simon Glass <sjg@chromium.org> |
#
aae95882 |
|
03-Feb-2020 |
Simon Glass <sjg@chromium.org> |
dma: Rename free() to rfree() This function name conflicts with our desire to #define free() to something else on sandbox. Since it deals with resources, rename it to rfree(). Signed-off-by: Simon Glass <sjg@chromium.org> |
#
b8a4dd28 |
|
04-Dec-2019 |
Vignesh Raghavendra <vigneshr@ti.com> |
dma: Introduce dma_get_cfg() interface Sometimes, there would be a need to exchange data between DMA provider and DMA client which are very specific to DMA driver of the SoC/platform and are not generic enough to be put into struct dma. Therefore, introduce dma_get_cfg() interface to get DMA provider specific data from client device. Clients can use unique configuration ID flags to get different configuration data from DMA driver. Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com> Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com> |
#
1eb69ae4 |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move ARM cache operations out of common.h These functions are CPU-related and do not use driver model. Move them to cpu_func.h Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> Reviewed-by: Tom Rini <trini@konsulko.com> |
#
27ab27f8 |
|
28-Nov-2018 |
Álvaro Fernández Rojas <noltari@gmail.com> |
dma: add channels support This adds channels support for dma controllers that have multiple channels which can transfer data to/from different devices (enet, usb...). DMA channle API: dma_get_by_index() dma_get_by_name() dma_request() dma_free() dma_enable() dma_disable() dma_prepare_rcv_buf() dma_receive() dma_send() Reviewed-by: Tom Rini <trini@konsulko.com> Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> [grygorii.strashko@ti.com: drop unused dma_get_by_index_platdata(), add metadata to send/receive ops, add dma_prepare_rcv_buf(), minor clean up] Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Reviewed-by: Simon Glass <sjg@chromium.org> |
#
10b4dc52 |
|
28-Nov-2018 |
Álvaro Fernández Rojas <noltari@gmail.com> |
dma: move dma_ops to dma-uclass.h Move dma_ops to a separate header file, following other uclass implementations. While doing so, this patch also improves dma_ops documentation. Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> |
#
83d290c5 |
|
06-May-2018 |
Tom Rini <trini@konsulko.com> |
SPDX: Convert all of our single license tags to Linux Kernel style When U-Boot started using SPDX tags we were among the early adopters and there weren't a lot of other examples to borrow from. So we picked the area of the file that usually had a full license text and replaced it with an appropriate SPDX-License-Identifier: entry. Since then, the Linux Kernel has adopted SPDX tags and they place it as the very first line in a file (except where shebangs are used, then it's second line) and with slightly different comment styles than us. In part due to community overlap, in part due to better tag visibility and in part for other minor reasons, switch over to that style. This commit changes all instances where we have a single declared license in the tag as both the before and after are identical in tag contents. There's also a few places where I found we did not have a tag and have introduced one. Signed-off-by: Tom Rini <trini@konsulko.com> |
#
d024236e |
|
18-Apr-2018 |
Tom Rini <trini@konsulko.com> |
Remove unnecessary instances of DECLARE_GLOBAL_DATA_PTR We have a large number of places where while we historically referenced gd in the code we no longer do, as well as cases where the code added that line "just in case" during development and never dropped it. Signed-off-by: Tom Rini <trini@konsulko.com> |
#
9b643e31 |
|
15-Sep-2017 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: replace with error() with pr_err() U-Boot widely uses error() as a bit noisier variant of printf(). This macro causes name conflict with the following line in include/linux/compiler-gcc.h: # define __compiletime_error(message) __attribute__((error(message))) This prevents us from using __compiletime_error(), and makes it difficult to fully sync BUILD_BUG macros with Linux. (Notice Linux's BUILD_BUG_ON_MSG is implemented by using compiletime_assert().) Let's convert error() into now treewide-available pr_err(). Done with the help of Coccinelle, excluing tools/ directory. The semantic patch I used is as follows: // <smpl> @@@@ -error +pr_err (...) // </smpl> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Simon Glass <sjg@chromium.org> [trini: Re-run Coccinelle] Signed-off-by: Tom Rini <trini@konsulko.com> |
#
a0594cef |
|
15-Feb-2016 |
Mugunthan V N <mugunthanvnm@ti.com> |
dm: implement a DMA uclass Implement a DMA uclass so that the devices like ethernet, spi, mmc etc can offload the data transfers from/to the device and memory. Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Jagan Teki <jteki@openedev.com> |
#
41575d8e |
|
03-Dec-2020 |
Simon Glass <sjg@chromium.org> |
dm: treewide: Rename auto_alloc_size members to be shorter This construct is quite long-winded. In earlier days it made some sense since auto-allocation was a strange concept. But with driver model now used pretty universally, we can shorten this to 'auto'. This reduces verbosity and makes it easier to read. Coincidentally it also ensures that every declaration is on one line, thus making dtoc's job easier. Signed-off-by: Simon Glass <sjg@chromium.org> |
#
8995a86c |
|
17-Sep-2020 |
Vignesh Raghavendra <vigneshr@ti.com> |
dma: Reduce error level when DMA channel type does not exist Caller would need gracefully handle failures of dma_get_device(), therefore reduce pr_err() to pr_debug() when DMA device is not found. Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com> Reviewed-by: Stefan Roese <sr@denx.de> |
#
f7ae49fc |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop log.h from common header Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org> |
#
90526e9f |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop net.h from common header Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org> |
#
336d4615 |
|
03-Feb-2020 |
Simon Glass <sjg@chromium.org> |
dm: core: Create a new header file for 'compat' features At present dm/device.h includes the linux-compatible features. This requires including linux/compat.h which in turn includes a lot of headers. One of these is malloc.h which we thus end up including in every file in U-Boot. Apart from the inefficiency of this, it is problematic for sandbox which needs to use the system malloc() in some files. Move the compatibility features into a separate header file. Signed-off-by: Simon Glass <sjg@chromium.org> |
#
aae95882 |
|
03-Feb-2020 |
Simon Glass <sjg@chromium.org> |
dma: Rename free() to rfree() This function name conflicts with our desire to #define free() to something else on sandbox. Since it deals with resources, rename it to rfree(). Signed-off-by: Simon Glass <sjg@chromium.org> |
#
b8a4dd28 |
|
04-Dec-2019 |
Vignesh Raghavendra <vigneshr@ti.com> |
dma: Introduce dma_get_cfg() interface Sometimes, there would be a need to exchange data between DMA provider and DMA client which are very specific to DMA driver of the SoC/platform and are not generic enough to be put into struct dma. Therefore, introduce dma_get_cfg() interface to get DMA provider specific data from client device. Clients can use unique configuration ID flags to get different configuration data from DMA driver. Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com> Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com> |
#
1eb69ae4 |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move ARM cache operations out of common.h These functions are CPU-related and do not use driver model. Move them to cpu_func.h Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> Reviewed-by: Tom Rini <trini@konsulko.com> |
#
27ab27f8 |
|
28-Nov-2018 |
Álvaro Fernández Rojas <noltari@gmail.com> |
dma: add channels support This adds channels support for dma controllers that have multiple channels which can transfer data to/from different devices (enet, usb...). DMA channle API: dma_get_by_index() dma_get_by_name() dma_request() dma_free() dma_enable() dma_disable() dma_prepare_rcv_buf() dma_receive() dma_send() Reviewed-by: Tom Rini <trini@konsulko.com> Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> [grygorii.strashko@ti.com: drop unused dma_get_by_index_platdata(), add metadata to send/receive ops, add dma_prepare_rcv_buf(), minor clean up] Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Reviewed-by: Simon Glass <sjg@chromium.org> |
#
10b4dc52 |
|
28-Nov-2018 |
Álvaro Fernández Rojas <noltari@gmail.com> |
dma: move dma_ops to dma-uclass.h Move dma_ops to a separate header file, following other uclass implementations. While doing so, this patch also improves dma_ops documentation. Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> |
#
83d290c5 |
|
06-May-2018 |
Tom Rini <trini@konsulko.com> |
SPDX: Convert all of our single license tags to Linux Kernel style When U-Boot started using SPDX tags we were among the early adopters and there weren't a lot of other examples to borrow from. So we picked the area of the file that usually had a full license text and replaced it with an appropriate SPDX-License-Identifier: entry. Since then, the Linux Kernel has adopted SPDX tags and they place it as the very first line in a file (except where shebangs are used, then it's second line) and with slightly different comment styles than us. In part due to community overlap, in part due to better tag visibility and in part for other minor reasons, switch over to that style. This commit changes all instances where we have a single declared license in the tag as both the before and after are identical in tag contents. There's also a few places where I found we did not have a tag and have introduced one. Signed-off-by: Tom Rini <trini@konsulko.com> |
#
d024236e |
|
18-Apr-2018 |
Tom Rini <trini@konsulko.com> |
Remove unnecessary instances of DECLARE_GLOBAL_DATA_PTR We have a large number of places where while we historically referenced gd in the code we no longer do, as well as cases where the code added that line "just in case" during development and never dropped it. Signed-off-by: Tom Rini <trini@konsulko.com> |
#
9b643e31 |
|
15-Sep-2017 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: replace with error() with pr_err() U-Boot widely uses error() as a bit noisier variant of printf(). This macro causes name conflict with the following line in include/linux/compiler-gcc.h: # define __compiletime_error(message) __attribute__((error(message))) This prevents us from using __compiletime_error(), and makes it difficult to fully sync BUILD_BUG macros with Linux. (Notice Linux's BUILD_BUG_ON_MSG is implemented by using compiletime_assert().) Let's convert error() into now treewide-available pr_err(). Done with the help of Coccinelle, excluing tools/ directory. The semantic patch I used is as follows: // <smpl> @@@@ -error +pr_err (...) // </smpl> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Simon Glass <sjg@chromium.org> [trini: Re-run Coccinelle] Signed-off-by: Tom Rini <trini@konsulko.com> |
#
a0594cef |
|
15-Feb-2016 |
Mugunthan V N <mugunthanvnm@ti.com> |
dm: implement a DMA uclass Implement a DMA uclass so that the devices like ethernet, spi, mmc etc can offload the data transfers from/to the device and memory. Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Jagan Teki <jteki@openedev.com> |
#
8995a86c |
|
17-Sep-2020 |
Vignesh Raghavendra <vigneshr@ti.com> |
dma: Reduce error level when DMA channel type does not exist Caller would need gracefully handle failures of dma_get_device(), therefore reduce pr_err() to pr_debug() when DMA device is not found. Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com> Reviewed-by: Stefan Roese <sr@denx.de> |
#
f7ae49fc |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop log.h from common header Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org> |
#
90526e9f |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop net.h from common header Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org> |
#
336d4615 |
|
03-Feb-2020 |
Simon Glass <sjg@chromium.org> |
dm: core: Create a new header file for 'compat' features At present dm/device.h includes the linux-compatible features. This requires including linux/compat.h which in turn includes a lot of headers. One of these is malloc.h which we thus end up including in every file in U-Boot. Apart from the inefficiency of this, it is problematic for sandbox which needs to use the system malloc() in some files. Move the compatibility features into a separate header file. Signed-off-by: Simon Glass <sjg@chromium.org> |
#
aae95882 |
|
03-Feb-2020 |
Simon Glass <sjg@chromium.org> |
dma: Rename free() to rfree() This function name conflicts with our desire to #define free() to something else on sandbox. Since it deals with resources, rename it to rfree(). Signed-off-by: Simon Glass <sjg@chromium.org> |
#
b8a4dd28 |
|
04-Dec-2019 |
Vignesh Raghavendra <vigneshr@ti.com> |
dma: Introduce dma_get_cfg() interface Sometimes, there would be a need to exchange data between DMA provider and DMA client which are very specific to DMA driver of the SoC/platform and are not generic enough to be put into struct dma. Therefore, introduce dma_get_cfg() interface to get DMA provider specific data from client device. Clients can use unique configuration ID flags to get different configuration data from DMA driver. Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com> Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com> |
#
1eb69ae4 |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move ARM cache operations out of common.h These functions are CPU-related and do not use driver model. Move them to cpu_func.h Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> Reviewed-by: Tom Rini <trini@konsulko.com> |
#
27ab27f8 |
|
28-Nov-2018 |
Álvaro Fernández Rojas <noltari@gmail.com> |
dma: add channels support This adds channels support for dma controllers that have multiple channels which can transfer data to/from different devices (enet, usb...). DMA channle API: dma_get_by_index() dma_get_by_name() dma_request() dma_free() dma_enable() dma_disable() dma_prepare_rcv_buf() dma_receive() dma_send() Reviewed-by: Tom Rini <trini@konsulko.com> Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> [grygorii.strashko@ti.com: drop unused dma_get_by_index_platdata(), add metadata to send/receive ops, add dma_prepare_rcv_buf(), minor clean up] Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Reviewed-by: Simon Glass <sjg@chromium.org> |
#
10b4dc52 |
|
28-Nov-2018 |
Álvaro Fernández Rojas <noltari@gmail.com> |
dma: move dma_ops to dma-uclass.h Move dma_ops to a separate header file, following other uclass implementations. While doing so, this patch also improves dma_ops documentation. Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> |
#
83d290c5 |
|
06-May-2018 |
Tom Rini <trini@konsulko.com> |
SPDX: Convert all of our single license tags to Linux Kernel style When U-Boot started using SPDX tags we were among the early adopters and there weren't a lot of other examples to borrow from. So we picked the area of the file that usually had a full license text and replaced it with an appropriate SPDX-License-Identifier: entry. Since then, the Linux Kernel has adopted SPDX tags and they place it as the very first line in a file (except where shebangs are used, then it's second line) and with slightly different comment styles than us. In part due to community overlap, in part due to better tag visibility and in part for other minor reasons, switch over to that style. This commit changes all instances where we have a single declared license in the tag as both the before and after are identical in tag contents. There's also a few places where I found we did not have a tag and have introduced one. Signed-off-by: Tom Rini <trini@konsulko.com> |
#
d024236e |
|
18-Apr-2018 |
Tom Rini <trini@konsulko.com> |
Remove unnecessary instances of DECLARE_GLOBAL_DATA_PTR We have a large number of places where while we historically referenced gd in the code we no longer do, as well as cases where the code added that line "just in case" during development and never dropped it. Signed-off-by: Tom Rini <trini@konsulko.com> |
#
9b643e31 |
|
15-Sep-2017 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: replace with error() with pr_err() U-Boot widely uses error() as a bit noisier variant of printf(). This macro causes name conflict with the following line in include/linux/compiler-gcc.h: # define __compiletime_error(message) __attribute__((error(message))) This prevents us from using __compiletime_error(), and makes it difficult to fully sync BUILD_BUG macros with Linux. (Notice Linux's BUILD_BUG_ON_MSG is implemented by using compiletime_assert().) Let's convert error() into now treewide-available pr_err(). Done with the help of Coccinelle, excluing tools/ directory. The semantic patch I used is as follows: // <smpl> @@@@ -error +pr_err (...) // </smpl> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Simon Glass <sjg@chromium.org> [trini: Re-run Coccinelle] Signed-off-by: Tom Rini <trini@konsulko.com> |
#
a0594cef |
|
15-Feb-2016 |
Mugunthan V N <mugunthanvnm@ti.com> |
dm: implement a DMA uclass Implement a DMA uclass so that the devices like ethernet, spi, mmc etc can offload the data transfers from/to the device and memory. Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Jagan Teki <jteki@openedev.com> |
#
f7ae49fc |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop log.h from common header Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org> |
#
90526e9f |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop net.h from common header Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org> |
#
336d4615 |
|
03-Feb-2020 |
Simon Glass <sjg@chromium.org> |
dm: core: Create a new header file for 'compat' features At present dm/device.h includes the linux-compatible features. This requires including linux/compat.h which in turn includes a lot of headers. One of these is malloc.h which we thus end up including in every file in U-Boot. Apart from the inefficiency of this, it is problematic for sandbox which needs to use the system malloc() in some files. Move the compatibility features into a separate header file. Signed-off-by: Simon Glass <sjg@chromium.org> |
#
aae95882 |
|
03-Feb-2020 |
Simon Glass <sjg@chromium.org> |
dma: Rename free() to rfree() This function name conflicts with our desire to #define free() to something else on sandbox. Since it deals with resources, rename it to rfree(). Signed-off-by: Simon Glass <sjg@chromium.org> |
#
b8a4dd28 |
|
04-Dec-2019 |
Vignesh Raghavendra <vigneshr@ti.com> |
dma: Introduce dma_get_cfg() interface Sometimes, there would be a need to exchange data between DMA provider and DMA client which are very specific to DMA driver of the SoC/platform and are not generic enough to be put into struct dma. Therefore, introduce dma_get_cfg() interface to get DMA provider specific data from client device. Clients can use unique configuration ID flags to get different configuration data from DMA driver. Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com> Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com> |
#
1eb69ae4 |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move ARM cache operations out of common.h These functions are CPU-related and do not use driver model. Move them to cpu_func.h Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> Reviewed-by: Tom Rini <trini@konsulko.com> |
#
27ab27f8 |
|
28-Nov-2018 |
Álvaro Fernández Rojas <noltari@gmail.com> |
dma: add channels support This adds channels support for dma controllers that have multiple channels which can transfer data to/from different devices (enet, usb...). DMA channle API: dma_get_by_index() dma_get_by_name() dma_request() dma_free() dma_enable() dma_disable() dma_prepare_rcv_buf() dma_receive() dma_send() Reviewed-by: Tom Rini <trini@konsulko.com> Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> [grygorii.strashko@ti.com: drop unused dma_get_by_index_platdata(), add metadata to send/receive ops, add dma_prepare_rcv_buf(), minor clean up] Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Reviewed-by: Simon Glass <sjg@chromium.org> |
#
10b4dc52 |
|
28-Nov-2018 |
Álvaro Fernández Rojas <noltari@gmail.com> |
dma: move dma_ops to dma-uclass.h Move dma_ops to a separate header file, following other uclass implementations. While doing so, this patch also improves dma_ops documentation. Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> |
#
83d290c5 |
|
06-May-2018 |
Tom Rini <trini@konsulko.com> |
SPDX: Convert all of our single license tags to Linux Kernel style When U-Boot started using SPDX tags we were among the early adopters and there weren't a lot of other examples to borrow from. So we picked the area of the file that usually had a full license text and replaced it with an appropriate SPDX-License-Identifier: entry. Since then, the Linux Kernel has adopted SPDX tags and they place it as the very first line in a file (except where shebangs are used, then it's second line) and with slightly different comment styles than us. In part due to community overlap, in part due to better tag visibility and in part for other minor reasons, switch over to that style. This commit changes all instances where we have a single declared license in the tag as both the before and after are identical in tag contents. There's also a few places where I found we did not have a tag and have introduced one. Signed-off-by: Tom Rini <trini@konsulko.com> |
#
d024236e |
|
18-Apr-2018 |
Tom Rini <trini@konsulko.com> |
Remove unnecessary instances of DECLARE_GLOBAL_DATA_PTR We have a large number of places where while we historically referenced gd in the code we no longer do, as well as cases where the code added that line "just in case" during development and never dropped it. Signed-off-by: Tom Rini <trini@konsulko.com> |
#
9b643e31 |
|
15-Sep-2017 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: replace with error() with pr_err() U-Boot widely uses error() as a bit noisier variant of printf(). This macro causes name conflict with the following line in include/linux/compiler-gcc.h: # define __compiletime_error(message) __attribute__((error(message))) This prevents us from using __compiletime_error(), and makes it difficult to fully sync BUILD_BUG macros with Linux. (Notice Linux's BUILD_BUG_ON_MSG is implemented by using compiletime_assert().) Let's convert error() into now treewide-available pr_err(). Done with the help of Coccinelle, excluing tools/ directory. The semantic patch I used is as follows: // <smpl> @@@@ -error +pr_err (...) // </smpl> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Simon Glass <sjg@chromium.org> [trini: Re-run Coccinelle] Signed-off-by: Tom Rini <trini@konsulko.com> |
#
a0594cef |
|
15-Feb-2016 |
Mugunthan V N <mugunthanvnm@ti.com> |
dm: implement a DMA uclass Implement a DMA uclass so that the devices like ethernet, spi, mmc etc can offload the data transfers from/to the device and memory. Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Jagan Teki <jteki@openedev.com> |
#
336d4615 |
|
03-Feb-2020 |
Simon Glass <sjg@chromium.org> |
dm: core: Create a new header file for 'compat' features At present dm/device.h includes the linux-compatible features. This requires including linux/compat.h which in turn includes a lot of headers. One of these is malloc.h which we thus end up including in every file in U-Boot. Apart from the inefficiency of this, it is problematic for sandbox which needs to use the system malloc() in some files. Move the compatibility features into a separate header file. Signed-off-by: Simon Glass <sjg@chromium.org> |
#
aae95882 |
|
03-Feb-2020 |
Simon Glass <sjg@chromium.org> |
dma: Rename free() to rfree() This function name conflicts with our desire to #define free() to something else on sandbox. Since it deals with resources, rename it to rfree(). Signed-off-by: Simon Glass <sjg@chromium.org> |
#
b8a4dd28 |
|
04-Dec-2019 |
Vignesh Raghavendra <vigneshr@ti.com> |
dma: Introduce dma_get_cfg() interface Sometimes, there would be a need to exchange data between DMA provider and DMA client which are very specific to DMA driver of the SoC/platform and are not generic enough to be put into struct dma. Therefore, introduce dma_get_cfg() interface to get DMA provider specific data from client device. Clients can use unique configuration ID flags to get different configuration data from DMA driver. Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com> Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com> |
#
1eb69ae4 |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move ARM cache operations out of common.h These functions are CPU-related and do not use driver model. Move them to cpu_func.h Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> Reviewed-by: Tom Rini <trini@konsulko.com> |
#
27ab27f8 |
|
28-Nov-2018 |
Álvaro Fernández Rojas <noltari@gmail.com> |
dma: add channels support This adds channels support for dma controllers that have multiple channels which can transfer data to/from different devices (enet, usb...). DMA channle API: dma_get_by_index() dma_get_by_name() dma_request() dma_free() dma_enable() dma_disable() dma_prepare_rcv_buf() dma_receive() dma_send() Reviewed-by: Tom Rini <trini@konsulko.com> Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> [grygorii.strashko@ti.com: drop unused dma_get_by_index_platdata(), add metadata to send/receive ops, add dma_prepare_rcv_buf(), minor clean up] Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Reviewed-by: Simon Glass <sjg@chromium.org> |
#
10b4dc52 |
|
28-Nov-2018 |
Álvaro Fernández Rojas <noltari@gmail.com> |
dma: move dma_ops to dma-uclass.h Move dma_ops to a separate header file, following other uclass implementations. While doing so, this patch also improves dma_ops documentation. Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> |
#
83d290c5 |
|
06-May-2018 |
Tom Rini <trini@konsulko.com> |
SPDX: Convert all of our single license tags to Linux Kernel style When U-Boot started using SPDX tags we were among the early adopters and there weren't a lot of other examples to borrow from. So we picked the area of the file that usually had a full license text and replaced it with an appropriate SPDX-License-Identifier: entry. Since then, the Linux Kernel has adopted SPDX tags and they place it as the very first line in a file (except where shebangs are used, then it's second line) and with slightly different comment styles than us. In part due to community overlap, in part due to better tag visibility and in part for other minor reasons, switch over to that style. This commit changes all instances where we have a single declared license in the tag as both the before and after are identical in tag contents. There's also a few places where I found we did not have a tag and have introduced one. Signed-off-by: Tom Rini <trini@konsulko.com> |
#
d024236e |
|
18-Apr-2018 |
Tom Rini <trini@konsulko.com> |
Remove unnecessary instances of DECLARE_GLOBAL_DATA_PTR We have a large number of places where while we historically referenced gd in the code we no longer do, as well as cases where the code added that line "just in case" during development and never dropped it. Signed-off-by: Tom Rini <trini@konsulko.com> |
#
9b643e31 |
|
15-Sep-2017 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: replace with error() with pr_err() U-Boot widely uses error() as a bit noisier variant of printf(). This macro causes name conflict with the following line in include/linux/compiler-gcc.h: # define __compiletime_error(message) __attribute__((error(message))) This prevents us from using __compiletime_error(), and makes it difficult to fully sync BUILD_BUG macros with Linux. (Notice Linux's BUILD_BUG_ON_MSG is implemented by using compiletime_assert().) Let's convert error() into now treewide-available pr_err(). Done with the help of Coccinelle, excluing tools/ directory. The semantic patch I used is as follows: // <smpl> @@@@ -error +pr_err (...) // </smpl> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Simon Glass <sjg@chromium.org> [trini: Re-run Coccinelle] Signed-off-by: Tom Rini <trini@konsulko.com> |
#
a0594cef |
|
15-Feb-2016 |
Mugunthan V N <mugunthanvnm@ti.com> |
dm: implement a DMA uclass Implement a DMA uclass so that the devices like ethernet, spi, mmc etc can offload the data transfers from/to the device and memory. Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Jagan Teki <jteki@openedev.com> |
#
b8a4dd28 |
|
04-Dec-2019 |
Vignesh Raghavendra <vigneshr@ti.com> |
dma: Introduce dma_get_cfg() interface Sometimes, there would be a need to exchange data between DMA provider and DMA client which are very specific to DMA driver of the SoC/platform and are not generic enough to be put into struct dma. Therefore, introduce dma_get_cfg() interface to get DMA provider specific data from client device. Clients can use unique configuration ID flags to get different configuration data from DMA driver. Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com> Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com> |
#
1eb69ae4 |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move ARM cache operations out of common.h These functions are CPU-related and do not use driver model. Move them to cpu_func.h Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> Reviewed-by: Tom Rini <trini@konsulko.com> |
#
27ab27f8 |
|
28-Nov-2018 |
Álvaro Fernández Rojas <noltari@gmail.com> |
dma: add channels support This adds channels support for dma controllers that have multiple channels which can transfer data to/from different devices (enet, usb...). DMA channle API: dma_get_by_index() dma_get_by_name() dma_request() dma_free() dma_enable() dma_disable() dma_prepare_rcv_buf() dma_receive() dma_send() Reviewed-by: Tom Rini <trini@konsulko.com> Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> [grygorii.strashko@ti.com: drop unused dma_get_by_index_platdata(), add metadata to send/receive ops, add dma_prepare_rcv_buf(), minor clean up] Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Reviewed-by: Simon Glass <sjg@chromium.org> |
#
10b4dc52 |
|
28-Nov-2018 |
Álvaro Fernández Rojas <noltari@gmail.com> |
dma: move dma_ops to dma-uclass.h Move dma_ops to a separate header file, following other uclass implementations. While doing so, this patch also improves dma_ops documentation. Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> |
#
83d290c5 |
|
06-May-2018 |
Tom Rini <trini@konsulko.com> |
SPDX: Convert all of our single license tags to Linux Kernel style When U-Boot started using SPDX tags we were among the early adopters and there weren't a lot of other examples to borrow from. So we picked the area of the file that usually had a full license text and replaced it with an appropriate SPDX-License-Identifier: entry. Since then, the Linux Kernel has adopted SPDX tags and they place it as the very first line in a file (except where shebangs are used, then it's second line) and with slightly different comment styles than us. In part due to community overlap, in part due to better tag visibility and in part for other minor reasons, switch over to that style. This commit changes all instances where we have a single declared license in the tag as both the before and after are identical in tag contents. There's also a few places where I found we did not have a tag and have introduced one. Signed-off-by: Tom Rini <trini@konsulko.com> |
#
d024236e |
|
18-Apr-2018 |
Tom Rini <trini@konsulko.com> |
Remove unnecessary instances of DECLARE_GLOBAL_DATA_PTR We have a large number of places where while we historically referenced gd in the code we no longer do, as well as cases where the code added that line "just in case" during development and never dropped it. Signed-off-by: Tom Rini <trini@konsulko.com> |
#
9b643e31 |
|
15-Sep-2017 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: replace with error() with pr_err() U-Boot widely uses error() as a bit noisier variant of printf(). This macro causes name conflict with the following line in include/linux/compiler-gcc.h: # define __compiletime_error(message) __attribute__((error(message))) This prevents us from using __compiletime_error(), and makes it difficult to fully sync BUILD_BUG macros with Linux. (Notice Linux's BUILD_BUG_ON_MSG is implemented by using compiletime_assert().) Let's convert error() into now treewide-available pr_err(). Done with the help of Coccinelle, excluing tools/ directory. The semantic patch I used is as follows: // <smpl> @@@@ -error +pr_err (...) // </smpl> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Simon Glass <sjg@chromium.org> [trini: Re-run Coccinelle] Signed-off-by: Tom Rini <trini@konsulko.com> |
#
a0594cef |
|
15-Feb-2016 |
Mugunthan V N <mugunthanvnm@ti.com> |
dm: implement a DMA uclass Implement a DMA uclass so that the devices like ethernet, spi, mmc etc can offload the data transfers from/to the device and memory. Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Jagan Teki <jteki@openedev.com> |
#
1eb69ae4 |
|
14-Nov-2019 |
Simon Glass <sjg@chromium.org> |
common: Move ARM cache operations out of common.h These functions are CPU-related and do not use driver model. Move them to cpu_func.h Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> Reviewed-by: Tom Rini <trini@konsulko.com> |
#
27ab27f8 |
|
28-Nov-2018 |
Álvaro Fernández Rojas <noltari@gmail.com> |
dma: add channels support This adds channels support for dma controllers that have multiple channels which can transfer data to/from different devices (enet, usb...). DMA channle API: dma_get_by_index() dma_get_by_name() dma_request() dma_free() dma_enable() dma_disable() dma_prepare_rcv_buf() dma_receive() dma_send() Reviewed-by: Tom Rini <trini@konsulko.com> Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> [grygorii.strashko@ti.com: drop unused dma_get_by_index_platdata(), add metadata to send/receive ops, add dma_prepare_rcv_buf(), minor clean up] Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Reviewed-by: Simon Glass <sjg@chromium.org> |
#
10b4dc52 |
|
28-Nov-2018 |
Álvaro Fernández Rojas <noltari@gmail.com> |
dma: move dma_ops to dma-uclass.h Move dma_ops to a separate header file, following other uclass implementations. While doing so, this patch also improves dma_ops documentation. Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> |
#
83d290c5 |
|
06-May-2018 |
Tom Rini <trini@konsulko.com> |
SPDX: Convert all of our single license tags to Linux Kernel style When U-Boot started using SPDX tags we were among the early adopters and there weren't a lot of other examples to borrow from. So we picked the area of the file that usually had a full license text and replaced it with an appropriate SPDX-License-Identifier: entry. Since then, the Linux Kernel has adopted SPDX tags and they place it as the very first line in a file (except where shebangs are used, then it's second line) and with slightly different comment styles than us. In part due to community overlap, in part due to better tag visibility and in part for other minor reasons, switch over to that style. This commit changes all instances where we have a single declared license in the tag as both the before and after are identical in tag contents. There's also a few places where I found we did not have a tag and have introduced one. Signed-off-by: Tom Rini <trini@konsulko.com> |
#
d024236e |
|
18-Apr-2018 |
Tom Rini <trini@konsulko.com> |
Remove unnecessary instances of DECLARE_GLOBAL_DATA_PTR We have a large number of places where while we historically referenced gd in the code we no longer do, as well as cases where the code added that line "just in case" during development and never dropped it. Signed-off-by: Tom Rini <trini@konsulko.com> |
#
9b643e31 |
|
15-Sep-2017 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: replace with error() with pr_err() U-Boot widely uses error() as a bit noisier variant of printf(). This macro causes name conflict with the following line in include/linux/compiler-gcc.h: # define __compiletime_error(message) __attribute__((error(message))) This prevents us from using __compiletime_error(), and makes it difficult to fully sync BUILD_BUG macros with Linux. (Notice Linux's BUILD_BUG_ON_MSG is implemented by using compiletime_assert().) Let's convert error() into now treewide-available pr_err(). Done with the help of Coccinelle, excluing tools/ directory. The semantic patch I used is as follows: // <smpl> @@@@ -error +pr_err (...) // </smpl> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Simon Glass <sjg@chromium.org> [trini: Re-run Coccinelle] Signed-off-by: Tom Rini <trini@konsulko.com> |
#
a0594cef |
|
15-Feb-2016 |
Mugunthan V N <mugunthanvnm@ti.com> |
dm: implement a DMA uclass Implement a DMA uclass so that the devices like ethernet, spi, mmc etc can offload the data transfers from/to the device and memory. Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Jagan Teki <jteki@openedev.com> |
#
27ab27f8 |
|
28-Nov-2018 |
Álvaro Fernández Rojas <noltari@gmail.com> |
dma: add channels support This adds channels support for dma controllers that have multiple channels which can transfer data to/from different devices (enet, usb...). DMA channle API: dma_get_by_index() dma_get_by_name() dma_request() dma_free() dma_enable() dma_disable() dma_prepare_rcv_buf() dma_receive() dma_send() Reviewed-by: Tom Rini <trini@konsulko.com> Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> [grygorii.strashko@ti.com: drop unused dma_get_by_index_platdata(), add metadata to send/receive ops, add dma_prepare_rcv_buf(), minor clean up] Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Reviewed-by: Simon Glass <sjg@chromium.org> |
#
10b4dc52 |
|
28-Nov-2018 |
Álvaro Fernández Rojas <noltari@gmail.com> |
dma: move dma_ops to dma-uclass.h Move dma_ops to a separate header file, following other uclass implementations. While doing so, this patch also improves dma_ops documentation. Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> |
#
83d290c5 |
|
06-May-2018 |
Tom Rini <trini@konsulko.com> |
SPDX: Convert all of our single license tags to Linux Kernel style When U-Boot started using SPDX tags we were among the early adopters and there weren't a lot of other examples to borrow from. So we picked the area of the file that usually had a full license text and replaced it with an appropriate SPDX-License-Identifier: entry. Since then, the Linux Kernel has adopted SPDX tags and they place it as the very first line in a file (except where shebangs are used, then it's second line) and with slightly different comment styles than us. In part due to community overlap, in part due to better tag visibility and in part for other minor reasons, switch over to that style. This commit changes all instances where we have a single declared license in the tag as both the before and after are identical in tag contents. There's also a few places where I found we did not have a tag and have introduced one. Signed-off-by: Tom Rini <trini@konsulko.com> |
#
d024236e |
|
18-Apr-2018 |
Tom Rini <trini@konsulko.com> |
Remove unnecessary instances of DECLARE_GLOBAL_DATA_PTR We have a large number of places where while we historically referenced gd in the code we no longer do, as well as cases where the code added that line "just in case" during development and never dropped it. Signed-off-by: Tom Rini <trini@konsulko.com> |
#
9b643e31 |
|
15-Sep-2017 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: replace with error() with pr_err() U-Boot widely uses error() as a bit noisier variant of printf(). This macro causes name conflict with the following line in include/linux/compiler-gcc.h: # define __compiletime_error(message) __attribute__((error(message))) This prevents us from using __compiletime_error(), and makes it difficult to fully sync BUILD_BUG macros with Linux. (Notice Linux's BUILD_BUG_ON_MSG is implemented by using compiletime_assert().) Let's convert error() into now treewide-available pr_err(). Done with the help of Coccinelle, excluing tools/ directory. The semantic patch I used is as follows: // <smpl> @@@@ -error +pr_err (...) // </smpl> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Simon Glass <sjg@chromium.org> [trini: Re-run Coccinelle] Signed-off-by: Tom Rini <trini@konsulko.com> |
#
a0594cef |
|
15-Feb-2016 |
Mugunthan V N <mugunthanvnm@ti.com> |
dm: implement a DMA uclass Implement a DMA uclass so that the devices like ethernet, spi, mmc etc can offload the data transfers from/to the device and memory. Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Jagan Teki <jteki@openedev.com> |
#
83d290c5 |
|
06-May-2018 |
Tom Rini <trini@konsulko.com> |
SPDX: Convert all of our single license tags to Linux Kernel style When U-Boot started using SPDX tags we were among the early adopters and there weren't a lot of other examples to borrow from. So we picked the area of the file that usually had a full license text and replaced it with an appropriate SPDX-License-Identifier: entry. Since then, the Linux Kernel has adopted SPDX tags and they place it as the very first line in a file (except where shebangs are used, then it's second line) and with slightly different comment styles than us. In part due to community overlap, in part due to better tag visibility and in part for other minor reasons, switch over to that style. This commit changes all instances where we have a single declared license in the tag as both the before and after are identical in tag contents. There's also a few places where I found we did not have a tag and have introduced one. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
d024236e |
|
18-Apr-2018 |
Tom Rini <trini@konsulko.com> |
Remove unnecessary instances of DECLARE_GLOBAL_DATA_PTR We have a large number of places where while we historically referenced gd in the code we no longer do, as well as cases where the code added that line "just in case" during development and never dropped it. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
9b643e31 |
|
15-Sep-2017 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: replace with error() with pr_err() U-Boot widely uses error() as a bit noisier variant of printf(). This macro causes name conflict with the following line in include/linux/compiler-gcc.h: # define __compiletime_error(message) __attribute__((error(message))) This prevents us from using __compiletime_error(), and makes it difficult to fully sync BUILD_BUG macros with Linux. (Notice Linux's BUILD_BUG_ON_MSG is implemented by using compiletime_assert().) Let's convert error() into now treewide-available pr_err(). Done with the help of Coccinelle, excluing tools/ directory. The semantic patch I used is as follows: // <smpl> @@@@ -error +pr_err (...) // </smpl> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Simon Glass <sjg@chromium.org> [trini: Re-run Coccinelle] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
a0594cef |
|
15-Feb-2016 |
Mugunthan V N <mugunthanvnm@ti.com> |
dm: implement a DMA uclass Implement a DMA uclass so that the devices like ethernet, spi, mmc etc can offload the data transfers from/to the device and memory. Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Jagan Teki <jteki@openedev.com>
|