Revert "Merge patch series "arm: dts: am62-beagleplay: Fix Beagleplay Ethernet""

When bringing in the series 'arm: dts: am62-beagleplay: Fix Beagleplay
Ethernet"' I failed to notice that b4 noticed it was based on next and
so took that as the base commit and merged that part of next to master.

This reverts commit c8ffd1356d42223cbb8c86280a083cc3c93e6426, reversing
changes made to 2ee6f3a5f7550de3599faef9704e166e5dcace35.

Reported-by: Jonas Karlman <jonas@kwiboo.se>
Signed-off-by: Tom Rini <trini@konsulko.com>

clk: Remove <common.h> and add needed includes

Remove <common.h> from this driver directory and when needed
add missing include files directly.

Signed-off-by: Tom Rini <trini@konsulko.com>

clk: ti: change clk_ti_latch() signature

The clock access functions exported by the clk header use the
struct clk_ti_reg parameter to get the address of the register. This
must also apply to clk_ti_latch(). Changes to TI's clk-mux and
clk-divider drivers prevented the patch from generating compile errors.

Signed-off-by: Dario Binacchi <dariobin@libero.it>

dm: fix build errors generated by last merges

Something was wrong in the merge process into the mainline.
Some added patches access driver structure fields and functions that
have been modified by previous patches.
The patch renames:
- dev_get_platdata to dev_get_plat
- dev_get_uclass_platdata to dev_get_uclass_plat
- ofdata_to_platdata to of_to_plat
- plat_data_alloc_size to plat_auto
- priv_auto_alloc_size to priv_auto
- video_uc_platdata to video_uc_plat

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: ti: add divider clock driver

The patch adds support for TI divider clock binding. The driver uses
routines provided by the common clock framework (ccf).

The code is based on the drivers/clk/ti/divider.c driver of the Linux
kernel version 5.9-rc7.
For DT binding details see:
- Documentation/devicetree/bindings/clock/ti/divider.txt

Signed-off-by: Dario Binacchi <dariobin@libero.it>

Revert "Merge patch series "arm: dts: am62-beagleplay: Fix Beagleplay Ethernet""

When bringing in the series 'arm: dts: am62-beagleplay: Fix Beagleplay
Ethernet"' I failed to notice that b4 noticed it was based on next and
so took that as the base commit and merged that part of next to master.

This reverts commit c8ffd1356d42223cbb8c86280a083cc3c93e6426, reversing
changes made to 2ee6f3a5f7550de3599faef9704e166e5dcace35.

Reported-by: Jonas Karlman <jonas@kwiboo.se>
Signed-off-by: Tom Rini <trini@konsulko.com>

clk: Remove <common.h> and add needed includes

Remove <common.h> from this driver directory and when needed
add missing include files directly.

Signed-off-by: Tom Rini <trini@konsulko.com>

clk: ti: change clk_ti_latch() signature

The clock access functions exported by the clk header use the
struct clk_ti_reg parameter to get the address of the register. This
must also apply to clk_ti_latch(). Changes to TI's clk-mux and
clk-divider drivers prevented the patch from generating compile errors.

Signed-off-by: Dario Binacchi <dariobin@libero.it>

dm: fix build errors generated by last merges

Something was wrong in the merge process into the mainline.
Some added patches access driver structure fields and functions that
have been modified by previous patches.
The patch renames:
- dev_get_platdata to dev_get_plat
- dev_get_uclass_platdata to dev_get_uclass_plat
- ofdata_to_platdata to of_to_plat
- plat_data_alloc_size to plat_auto
- priv_auto_alloc_size to priv_auto
- video_uc_platdata to video_uc_plat

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: ti: add divider clock driver

The patch adds support for TI divider clock binding. The driver uses
routines provided by the common clock framework (ccf).

The code is based on the drivers/clk/ti/divider.c driver of the Linux
kernel version 5.9-rc7.
For DT binding details see:
- Documentation/devicetree/bindings/clock/ti/divider.txt

Signed-off-by: Dario Binacchi <dariobin@libero.it>

Revert "Merge patch series "arm: dts: am62-beagleplay: Fix Beagleplay Ethernet""

When bringing in the series 'arm: dts: am62-beagleplay: Fix Beagleplay
Ethernet"' I failed to notice that b4 noticed it was based on next and
so took that as the base commit and merged that part of next to master.

This reverts commit c8ffd1356d42223cbb8c86280a083cc3c93e6426, reversing
changes made to 2ee6f3a5f7550de3599faef9704e166e5dcace35.

Reported-by: Jonas Karlman <jonas@kwiboo.se>
Signed-off-by: Tom Rini <trini@konsulko.com>

clk: Remove <common.h> and add needed includes

Remove <common.h> from this driver directory and when needed
add missing include files directly.

Signed-off-by: Tom Rini <trini@konsulko.com>

clk: ti: change clk_ti_latch() signature

The clock access functions exported by the clk header use the
struct clk_ti_reg parameter to get the address of the register. This
must also apply to clk_ti_latch(). Changes to TI's clk-mux and
clk-divider drivers prevented the patch from generating compile errors.

Signed-off-by: Dario Binacchi <dariobin@libero.it>

dm: fix build errors generated by last merges

Something was wrong in the merge process into the mainline.
Some added patches access driver structure fields and functions that
have been modified by previous patches.
The patch renames:
- dev_get_platdata to dev_get_plat
- dev_get_uclass_platdata to dev_get_uclass_plat
- ofdata_to_platdata to of_to_plat
- plat_data_alloc_size to plat_auto
- priv_auto_alloc_size to priv_auto
- video_uc_platdata to video_uc_plat

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: ti: add divider clock driver

The patch adds support for TI divider clock binding. The driver uses
routines provided by the common clock framework (ccf).

The code is based on the drivers/clk/ti/divider.c driver of the Linux
kernel version 5.9-rc7.
For DT binding details see:
- Documentation/devicetree/bindings/clock/ti/divider.txt

Signed-off-by: Dario Binacchi <dariobin@libero.it>

Revert "Merge patch series "arm: dts: am62-beagleplay: Fix Beagleplay Ethernet""

When bringing in the series 'arm: dts: am62-beagleplay: Fix Beagleplay
Ethernet"' I failed to notice that b4 noticed it was based on next and
so took that as the base commit and merged that part of next to master.

This reverts commit c8ffd1356d42223cbb8c86280a083cc3c93e6426, reversing
changes made to 2ee6f3a5f7550de3599faef9704e166e5dcace35.

Reported-by: Jonas Karlman <jonas@kwiboo.se>
Signed-off-by: Tom Rini <trini@konsulko.com>

clk: Remove <common.h> and add needed includes

Remove <common.h> from this driver directory and when needed
add missing include files directly.

Signed-off-by: Tom Rini <trini@konsulko.com>

clk: ti: change clk_ti_latch() signature

The clock access functions exported by the clk header use the
struct clk_ti_reg parameter to get the address of the register. This
must also apply to clk_ti_latch(). Changes to TI's clk-mux and
clk-divider drivers prevented the patch from generating compile errors.

Signed-off-by: Dario Binacchi <dariobin@libero.it>

dm: fix build errors generated by last merges

Something was wrong in the merge process into the mainline.
Some added patches access driver structure fields and functions that
have been modified by previous patches.
The patch renames:
- dev_get_platdata to dev_get_plat
- dev_get_uclass_platdata to dev_get_uclass_plat
- ofdata_to_platdata to of_to_plat
- plat_data_alloc_size to plat_auto
- priv_auto_alloc_size to priv_auto
- video_uc_platdata to video_uc_plat

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: ti: add divider clock driver

The patch adds support for TI divider clock binding. The driver uses
routines provided by the common clock framework (ccf).

The code is based on the drivers/clk/ti/divider.c driver of the Linux
kernel version 5.9-rc7.
For DT binding details see:
- Documentation/devicetree/bindings/clock/ti/divider.txt

Signed-off-by: Dario Binacchi <dariobin@libero.it>

Revert "Merge patch series "arm: dts: am62-beagleplay: Fix Beagleplay Ethernet""

When bringing in the series 'arm: dts: am62-beagleplay: Fix Beagleplay
Ethernet"' I failed to notice that b4 noticed it was based on next and
so took that as the base commit and merged that part of next to master.

This reverts commit c8ffd1356d42223cbb8c86280a083cc3c93e6426, reversing
changes made to 2ee6f3a5f7550de3599faef9704e166e5dcace35.

Reported-by: Jonas Karlman <jonas@kwiboo.se>
Signed-off-by: Tom Rini <trini@konsulko.com>

clk: Remove <common.h> and add needed includes

Remove <common.h> from this driver directory and when needed
add missing include files directly.

Signed-off-by: Tom Rini <trini@konsulko.com>

clk: ti: change clk_ti_latch() signature

The clock access functions exported by the clk header use the
struct clk_ti_reg parameter to get the address of the register. This
must also apply to clk_ti_latch(). Changes to TI's clk-mux and
clk-divider drivers prevented the patch from generating compile errors.

Signed-off-by: Dario Binacchi <dariobin@libero.it>

dm: fix build errors generated by last merges

Something was wrong in the merge process into the mainline.
Some added patches access driver structure fields and functions that
have been modified by previous patches.
The patch renames:
- dev_get_platdata to dev_get_plat
- dev_get_uclass_platdata to dev_get_uclass_plat
- ofdata_to_platdata to of_to_plat
- plat_data_alloc_size to plat_auto
- priv_auto_alloc_size to priv_auto
- video_uc_platdata to video_uc_plat

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: ti: add divider clock driver

The patch adds support for TI divider clock binding. The driver uses
routines provided by the common clock framework (ccf).

The code is based on the drivers/clk/ti/divider.c driver of the Linux
kernel version 5.9-rc7.
For DT binding details see:
- Documentation/devicetree/bindings/clock/ti/divider.txt

Signed-off-by: Dario Binacchi <dariobin@libero.it>

Revert "Merge patch series "arm: dts: am62-beagleplay: Fix Beagleplay Ethernet""

When bringing in the series 'arm: dts: am62-beagleplay: Fix Beagleplay
Ethernet"' I failed to notice that b4 noticed it was based on next and
so took that as the base commit and merged that part of next to master.

This reverts commit c8ffd1356d42223cbb8c86280a083cc3c93e6426, reversing
changes made to 2ee6f3a5f7550de3599faef9704e166e5dcace35.

Reported-by: Jonas Karlman <jonas@kwiboo.se>
Signed-off-by: Tom Rini <trini@konsulko.com>

clk: Remove <common.h> and add needed includes

Remove <common.h> from this driver directory and when needed
add missing include files directly.

Signed-off-by: Tom Rini <trini@konsulko.com>

clk: ti: change clk_ti_latch() signature

The clock access functions exported by the clk header use the
struct clk_ti_reg parameter to get the address of the register. This
must also apply to clk_ti_latch(). Changes to TI's clk-mux and
clk-divider drivers prevented the patch from generating compile errors.

Signed-off-by: Dario Binacchi <dariobin@libero.it>

dm: fix build errors generated by last merges

Something was wrong in the merge process into the mainline.
Some added patches access driver structure fields and functions that
have been modified by previous patches.
The patch renames:
- dev_get_platdata to dev_get_plat
- dev_get_uclass_platdata to dev_get_uclass_plat
- ofdata_to_platdata to of_to_plat
- plat_data_alloc_size to plat_auto
- priv_auto_alloc_size to priv_auto
- video_uc_platdata to video_uc_plat

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: ti: add divider clock driver

The patch adds support for TI divider clock binding. The driver uses
routines provided by the common clock framework (ccf).

The code is based on the drivers/clk/ti/divider.c driver of the Linux
kernel version 5.9-rc7.
For DT binding details see:
- Documentation/devicetree/bindings/clock/ti/divider.txt

Signed-off-by: Dario Binacchi <dariobin@libero.it>

Revert "Merge patch series "arm: dts: am62-beagleplay: Fix Beagleplay Ethernet""

When bringing in the series 'arm: dts: am62-beagleplay: Fix Beagleplay
Ethernet"' I failed to notice that b4 noticed it was based on next and
so took that as the base commit and merged that part of next to master.

This reverts commit c8ffd1356d42223cbb8c86280a083cc3c93e6426, reversing
changes made to 2ee6f3a5f7550de3599faef9704e166e5dcace35.

Reported-by: Jonas Karlman <jonas@kwiboo.se>
Signed-off-by: Tom Rini <trini@konsulko.com>

clk: Remove <common.h> and add needed includes

Remove <common.h> from this driver directory and when needed
add missing include files directly.

Signed-off-by: Tom Rini <trini@konsulko.com>

clk: ti: change clk_ti_latch() signature

The clock access functions exported by the clk header use the
struct clk_ti_reg parameter to get the address of the register. This
must also apply to clk_ti_latch(). Changes to TI's clk-mux and
clk-divider drivers prevented the patch from generating compile errors.

Signed-off-by: Dario Binacchi <dariobin@libero.it>

dm: fix build errors generated by last merges

Something was wrong in the merge process into the mainline.
Some added patches access driver structure fields and functions that
have been modified by previous patches.
The patch renames:
- dev_get_platdata to dev_get_plat
- dev_get_uclass_platdata to dev_get_uclass_plat
- ofdata_to_platdata to of_to_plat
- plat_data_alloc_size to plat_auto
- priv_auto_alloc_size to priv_auto
- video_uc_platdata to video_uc_plat

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: ti: add divider clock driver

The patch adds support for TI divider clock binding. The driver uses
routines provided by the common clock framework (ccf).

The code is based on the drivers/clk/ti/divider.c driver of the Linux
kernel version 5.9-rc7.
For DT binding details see:
- Documentation/devicetree/bindings/clock/ti/divider.txt

Signed-off-by: Dario Binacchi <dariobin@libero.it>

Revert "Merge patch series "arm: dts: am62-beagleplay: Fix Beagleplay Ethernet""

When bringing in the series 'arm: dts: am62-beagleplay: Fix Beagleplay
Ethernet"' I failed to notice that b4 noticed it was based on next and
so took that as the base commit and merged that part of next to master.

This reverts commit c8ffd1356d42223cbb8c86280a083cc3c93e6426, reversing
changes made to 2ee6f3a5f7550de3599faef9704e166e5dcace35.

Reported-by: Jonas Karlman <jonas@kwiboo.se>
Signed-off-by: Tom Rini <trini@konsulko.com>

clk: Remove <common.h> and add needed includes

Remove <common.h> from this driver directory and when needed
add missing include files directly.

Signed-off-by: Tom Rini <trini@konsulko.com>

clk: ti: change clk_ti_latch() signature

The clock access functions exported by the clk header use the
struct clk_ti_reg parameter to get the address of the register. This
must also apply to clk_ti_latch(). Changes to TI's clk-mux and
clk-divider drivers prevented the patch from generating compile errors.

Signed-off-by: Dario Binacchi <dariobin@libero.it>

dm: fix build errors generated by last merges

Something was wrong in the merge process into the mainline.
Some added patches access driver structure fields and functions that
have been modified by previous patches.
The patch renames:
- dev_get_platdata to dev_get_plat
- dev_get_uclass_platdata to dev_get_uclass_plat
- ofdata_to_platdata to of_to_plat
- plat_data_alloc_size to plat_auto
- priv_auto_alloc_size to priv_auto
- video_uc_platdata to video_uc_plat

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: ti: add divider clock driver

The patch adds support for TI divider clock binding. The driver uses
routines provided by the common clock framework (ccf).

The code is based on the drivers/clk/ti/divider.c driver of the Linux
kernel version 5.9-rc7.
For DT binding details see:
- Documentation/devicetree/bindings/clock/ti/divider.txt

Signed-off-by: Dario Binacchi <dariobin@libero.it>

Revert "Merge patch series "arm: dts: am62-beagleplay: Fix Beagleplay Ethernet""

When bringing in the series 'arm: dts: am62-beagleplay: Fix Beagleplay
Ethernet"' I failed to notice that b4 noticed it was based on next and
so took that as the base commit and merged that part of next to master.

This reverts commit c8ffd1356d42223cbb8c86280a083cc3c93e6426, reversing
changes made to 2ee6f3a5f7550de3599faef9704e166e5dcace35.

Reported-by: Jonas Karlman <jonas@kwiboo.se>
Signed-off-by: Tom Rini <trini@konsulko.com>

clk: Remove <common.h> and add needed includes

Remove <common.h> from this driver directory and when needed
add missing include files directly.

Signed-off-by: Tom Rini <trini@konsulko.com>

clk: ti: change clk_ti_latch() signature

The clock access functions exported by the clk header use the
struct clk_ti_reg parameter to get the address of the register. This
must also apply to clk_ti_latch(). Changes to TI's clk-mux and
clk-divider drivers prevented the patch from generating compile errors.

Signed-off-by: Dario Binacchi <dariobin@libero.it>

dm: fix build errors generated by last merges

Something was wrong in the merge process into the mainline.
Some added patches access driver structure fields and functions that
have been modified by previous patches.
The patch renames:
- dev_get_platdata to dev_get_plat
- dev_get_uclass_platdata to dev_get_uclass_plat
- ofdata_to_platdata to of_to_plat
- plat_data_alloc_size to plat_auto
- priv_auto_alloc_size to priv_auto
- video_uc_platdata to video_uc_plat

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: ti: add divider clock driver

The patch adds support for TI divider clock binding. The driver uses
routines provided by the common clock framework (ccf).

The code is based on the drivers/clk/ti/divider.c driver of the Linux
kernel version 5.9-rc7.
For DT binding details see:
- Documentation/devicetree/bindings/clock/ti/divider.txt

Signed-off-by: Dario Binacchi <dariobin@libero.it>

Revert "Merge patch series "arm: dts: am62-beagleplay: Fix Beagleplay Ethernet""

When bringing in the series 'arm: dts: am62-beagleplay: Fix Beagleplay
Ethernet"' I failed to notice that b4 noticed it was based on next and
so took that as the base commit and merged that part of next to master.

This reverts commit c8ffd1356d42223cbb8c86280a083cc3c93e6426, reversing
changes made to 2ee6f3a5f7550de3599faef9704e166e5dcace35.

Reported-by: Jonas Karlman <jonas@kwiboo.se>
Signed-off-by: Tom Rini <trini@konsulko.com>

clk: Remove <common.h> and add needed includes

Remove <common.h> from this driver directory and when needed
add missing include files directly.

Signed-off-by: Tom Rini <trini@konsulko.com>

clk: ti: change clk_ti_latch() signature

The clock access functions exported by the clk header use the
struct clk_ti_reg parameter to get the address of the register. This
must also apply to clk_ti_latch(). Changes to TI's clk-mux and
clk-divider drivers prevented the patch from generating compile errors.

Signed-off-by: Dario Binacchi <dariobin@libero.it>

dm: fix build errors generated by last merges

Something was wrong in the merge process into the mainline.
Some added patches access driver structure fields and functions that
have been modified by previous patches.
The patch renames:
- dev_get_platdata to dev_get_plat
- dev_get_uclass_platdata to dev_get_uclass_plat
- ofdata_to_platdata to of_to_plat
- plat_data_alloc_size to plat_auto
- priv_auto_alloc_size to priv_auto
- video_uc_platdata to video_uc_plat

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: ti: add divider clock driver

The patch adds support for TI divider clock binding. The driver uses
routines provided by the common clock framework (ccf).

The code is based on the drivers/clk/ti/divider.c driver of the Linux
kernel version 5.9-rc7.
For DT binding details see:
- Documentation/devicetree/bindings/clock/ti/divider.txt

Signed-off-by: Dario Binacchi <dariobin@libero.it>

Revert "Merge patch series "arm: dts: am62-beagleplay: Fix Beagleplay Ethernet""

When bringing in the series 'arm: dts: am62-beagleplay: Fix Beagleplay
Ethernet"' I failed to notice that b4 noticed it was based on next and
so took that as the base commit and merged that part of next to master.

This reverts commit c8ffd1356d42223cbb8c86280a083cc3c93e6426, reversing
changes made to 2ee6f3a5f7550de3599faef9704e166e5dcace35.

Reported-by: Jonas Karlman <jonas@kwiboo.se>
Signed-off-by: Tom Rini <trini@konsulko.com>

clk: Remove <common.h> and add needed includes

Remove <common.h> from this driver directory and when needed
add missing include files directly.

Signed-off-by: Tom Rini <trini@konsulko.com>

clk: ti: change clk_ti_latch() signature

The clock access functions exported by the clk header use the
struct clk_ti_reg parameter to get the address of the register. This
must also apply to clk_ti_latch(). Changes to TI's clk-mux and
clk-divider drivers prevented the patch from generating compile errors.

Signed-off-by: Dario Binacchi <dariobin@libero.it>

dm: fix build errors generated by last merges

Something was wrong in the merge process into the mainline.
Some added patches access driver structure fields and functions that
have been modified by previous patches.
The patch renames:
- dev_get_platdata to dev_get_plat
- dev_get_uclass_platdata to dev_get_uclass_plat
- ofdata_to_platdata to of_to_plat
- plat_data_alloc_size to plat_auto
- priv_auto_alloc_size to priv_auto
- video_uc_platdata to video_uc_plat

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: ti: add divider clock driver

The patch adds support for TI divider clock binding. The driver uses
routines provided by the common clock framework (ccf).

The code is based on the drivers/clk/ti/divider.c driver of the Linux
kernel version 5.9-rc7.
For DT binding details see:
- Documentation/devicetree/bindings/clock/ti/divider.txt

Signed-off-by: Dario Binacchi <dariobin@libero.it>

Revert "Merge patch series "arm: dts: am62-beagleplay: Fix Beagleplay Ethernet""

When bringing in the series 'arm: dts: am62-beagleplay: Fix Beagleplay
Ethernet"' I failed to notice that b4 noticed it was based on next and
so took that as the base commit and merged that part of next to master.

This reverts commit c8ffd1356d42223cbb8c86280a083cc3c93e6426, reversing
changes made to 2ee6f3a5f7550de3599faef9704e166e5dcace35.

Reported-by: Jonas Karlman <jonas@kwiboo.se>
Signed-off-by: Tom Rini <trini@konsulko.com>

clk: Remove <common.h> and add needed includes

Remove <common.h> from this driver directory and when needed
add missing include files directly.

Signed-off-by: Tom Rini <trini@konsulko.com>

clk: ti: change clk_ti_latch() signature

The clock access functions exported by the clk header use the
struct clk_ti_reg parameter to get the address of the register. This
must also apply to clk_ti_latch(). Changes to TI's clk-mux and
clk-divider drivers prevented the patch from generating compile errors.

Signed-off-by: Dario Binacchi <dariobin@libero.it>

dm: fix build errors generated by last merges

Something was wrong in the merge process into the mainline.
Some added patches access driver structure fields and functions that
have been modified by previous patches.
The patch renames:
- dev_get_platdata to dev_get_plat
- dev_get_uclass_platdata to dev_get_uclass_plat
- ofdata_to_platdata to of_to_plat
- plat_data_alloc_size to plat_auto
- priv_auto_alloc_size to priv_auto
- video_uc_platdata to video_uc_plat

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: ti: add divider clock driver

The patch adds support for TI divider clock binding. The driver uses
routines provided by the common clock framework (ccf).

The code is based on the drivers/clk/ti/divider.c driver of the Linux
kernel version 5.9-rc7.
For DT binding details see:
- Documentation/devicetree/bindings/clock/ti/divider.txt

Signed-off-by: Dario Binacchi <dariobin@libero.it>

Revert "Merge patch series "arm: dts: am62-beagleplay: Fix Beagleplay Ethernet""

When bringing in the series 'arm: dts: am62-beagleplay: Fix Beagleplay
Ethernet"' I failed to notice that b4 noticed it was based on next and
so took that as the base commit and merged that part of next to master.

This reverts commit c8ffd1356d42223cbb8c86280a083cc3c93e6426, reversing
changes made to 2ee6f3a5f7550de3599faef9704e166e5dcace35.

Reported-by: Jonas Karlman <jonas@kwiboo.se>
Signed-off-by: Tom Rini <trini@konsulko.com>

clk: Remove <common.h> and add needed includes

Remove <common.h> from this driver directory and when needed
add missing include files directly.

Signed-off-by: Tom Rini <trini@konsulko.com>

clk: ti: change clk_ti_latch() signature

The clock access functions exported by the clk header use the
struct clk_ti_reg parameter to get the address of the register. This
must also apply to clk_ti_latch(). Changes to TI's clk-mux and
clk-divider drivers prevented the patch from generating compile errors.

Signed-off-by: Dario Binacchi <dariobin@libero.it>

dm: fix build errors generated by last merges

Something was wrong in the merge process into the mainline.
Some added patches access driver structure fields and functions that
have been modified by previous patches.
The patch renames:
- dev_get_platdata to dev_get_plat
- dev_get_uclass_platdata to dev_get_uclass_plat
- ofdata_to_platdata to of_to_plat
- plat_data_alloc_size to plat_auto
- priv_auto_alloc_size to priv_auto
- video_uc_platdata to video_uc_plat

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: ti: add divider clock driver

The patch adds support for TI divider clock binding. The driver uses
routines provided by the common clock framework (ccf).

The code is based on the drivers/clk/ti/divider.c driver of the Linux
kernel version 5.9-rc7.
For DT binding details see:
- Documentation/devicetree/bindings/clock/ti/divider.txt

Signed-off-by: Dario Binacchi <dariobin@libero.it>

Revert "Merge patch series "arm: dts: am62-beagleplay: Fix Beagleplay Ethernet""

When bringing in the series 'arm: dts: am62-beagleplay: Fix Beagleplay
Ethernet"' I failed to notice that b4 noticed it was based on next and
so took that as the base commit and merged that part of next to master.

This reverts commit c8ffd1356d42223cbb8c86280a083cc3c93e6426, reversing
changes made to 2ee6f3a5f7550de3599faef9704e166e5dcace35.

Reported-by: Jonas Karlman <jonas@kwiboo.se>
Signed-off-by: Tom Rini <trini@konsulko.com>

clk: Remove <common.h> and add needed includes

Remove <common.h> from this driver directory and when needed
add missing include files directly.

Signed-off-by: Tom Rini <trini@konsulko.com>

clk: ti: change clk_ti_latch() signature

The clock access functions exported by the clk header use the
struct clk_ti_reg parameter to get the address of the register. This
must also apply to clk_ti_latch(). Changes to TI's clk-mux and
clk-divider drivers prevented the patch from generating compile errors.

Signed-off-by: Dario Binacchi <dariobin@libero.it>

dm: fix build errors generated by last merges

Something was wrong in the merge process into the mainline.
Some added patches access driver structure fields and functions that
have been modified by previous patches.
The patch renames:
- dev_get_platdata to dev_get_plat
- dev_get_uclass_platdata to dev_get_uclass_plat
- ofdata_to_platdata to of_to_plat
- plat_data_alloc_size to plat_auto
- priv_auto_alloc_size to priv_auto
- video_uc_platdata to video_uc_plat

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: ti: add divider clock driver

The patch adds support for TI divider clock binding. The driver uses
routines provided by the common clock framework (ccf).

The code is based on the drivers/clk/ti/divider.c driver of the Linux
kernel version 5.9-rc7.
For DT binding details see:
- Documentation/devicetree/bindings/clock/ti/divider.txt

Signed-off-by: Dario Binacchi <dariobin@libero.it>

Revert "Merge patch series "arm: dts: am62-beagleplay: Fix Beagleplay Ethernet""

When bringing in the series 'arm: dts: am62-beagleplay: Fix Beagleplay
Ethernet"' I failed to notice that b4 noticed it was based on next and
so took that as the base commit and merged that part of next to master.

This reverts commit c8ffd1356d42223cbb8c86280a083cc3c93e6426, reversing
changes made to 2ee6f3a5f7550de3599faef9704e166e5dcace35.

Reported-by: Jonas Karlman <jonas@kwiboo.se>
Signed-off-by: Tom Rini <trini@konsulko.com>

clk: Remove <common.h> and add needed includes

Remove <common.h> from this driver directory and when needed
add missing include files directly.

Signed-off-by: Tom Rini <trini@konsulko.com>

clk: ti: change clk_ti_latch() signature

The clock access functions exported by the clk header use the
struct clk_ti_reg parameter to get the address of the register. This
must also apply to clk_ti_latch(). Changes to TI's clk-mux and
clk-divider drivers prevented the patch from generating compile errors.

Signed-off-by: Dario Binacchi <dariobin@libero.it>

dm: fix build errors generated by last merges

Something was wrong in the merge process into the mainline.
Some added patches access driver structure fields and functions that
have been modified by previous patches.
The patch renames:
- dev_get_platdata to dev_get_plat
- dev_get_uclass_platdata to dev_get_uclass_plat
- ofdata_to_platdata to of_to_plat
- plat_data_alloc_size to plat_auto
- priv_auto_alloc_size to priv_auto
- video_uc_platdata to video_uc_plat

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: ti: add divider clock driver

The patch adds support for TI divider clock binding. The driver uses
routines provided by the common clock framework (ccf).

The code is based on the drivers/clk/ti/divider.c driver of the Linux
kernel version 5.9-rc7.
For DT binding details see:
- Documentation/devicetree/bindings/clock/ti/divider.txt

Signed-off-by: Dario Binacchi <dariobin@libero.it>

Revert "Merge patch series "arm: dts: am62-beagleplay: Fix Beagleplay Ethernet""

When bringing in the series 'arm: dts: am62-beagleplay: Fix Beagleplay
Ethernet"' I failed to notice that b4 noticed it was based on next and
so took that as the base commit and merged that part of next to master.

This reverts commit c8ffd1356d42223cbb8c86280a083cc3c93e6426, reversing
changes made to 2ee6f3a5f7550de3599faef9704e166e5dcace35.

Reported-by: Jonas Karlman <jonas@kwiboo.se>
Signed-off-by: Tom Rini <trini@konsulko.com>

clk: Remove <common.h> and add needed includes

Remove <common.h> from this driver directory and when needed
add missing include files directly.

Signed-off-by: Tom Rini <trini@konsulko.com>

clk: ti: change clk_ti_latch() signature

The clock access functions exported by the clk header use the
struct clk_ti_reg parameter to get the address of the register. This
must also apply to clk_ti_latch(). Changes to TI's clk-mux and
clk-divider drivers prevented the patch from generating compile errors.

Signed-off-by: Dario Binacchi <dariobin@libero.it>

dm: fix build errors generated by last merges

Something was wrong in the merge process into the mainline.
Some added patches access driver structure fields and functions that
have been modified by previous patches.
The patch renames:
- dev_get_platdata to dev_get_plat
- dev_get_uclass_platdata to dev_get_uclass_plat
- ofdata_to_platdata to of_to_plat
- plat_data_alloc_size to plat_auto
- priv_auto_alloc_size to priv_auto
- video_uc_platdata to video_uc_plat

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: ti: add divider clock driver

The patch adds support for TI divider clock binding. The driver uses
routines provided by the common clock framework (ccf).

The code is based on the drivers/clk/ti/divider.c driver of the Linux
kernel version 5.9-rc7.
For DT binding details see:
- Documentation/devicetree/bindings/clock/ti/divider.txt

Signed-off-by: Dario Binacchi <dariobin@libero.it>

Revert "Merge patch series "arm: dts: am62-beagleplay: Fix Beagleplay Ethernet""

When bringing in the series 'arm: dts: am62-beagleplay: Fix Beagleplay
Ethernet"' I failed to notice that b4 noticed it was based on next and
so took that as the base commit and merged that part of next to master.

This reverts commit c8ffd1356d42223cbb8c86280a083cc3c93e6426, reversing
changes made to 2ee6f3a5f7550de3599faef9704e166e5dcace35.

Reported-by: Jonas Karlman <jonas@kwiboo.se>
Signed-off-by: Tom Rini <trini@konsulko.com>

clk: Remove <common.h> and add needed includes

Remove <common.h> from this driver directory and when needed
add missing include files directly.

Signed-off-by: Tom Rini <trini@konsulko.com>

clk: ti: change clk_ti_latch() signature

The clock access functions exported by the clk header use the
struct clk_ti_reg parameter to get the address of the register. This
must also apply to clk_ti_latch(). Changes to TI's clk-mux and
clk-divider drivers prevented the patch from generating compile errors.

Signed-off-by: Dario Binacchi <dariobin@libero.it>

dm: fix build errors generated by last merges

Something was wrong in the merge process into the mainline.
Some added patches access driver structure fields and functions that
have been modified by previous patches.
The patch renames:
- dev_get_platdata to dev_get_plat
- dev_get_uclass_platdata to dev_get_uclass_plat
- ofdata_to_platdata to of_to_plat
- plat_data_alloc_size to plat_auto
- priv_auto_alloc_size to priv_auto
- video_uc_platdata to video_uc_plat

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: ti: add divider clock driver

The patch adds support for TI divider clock binding. The driver uses
routines provided by the common clock framework (ccf).

The code is based on the drivers/clk/ti/divider.c driver of the Linux
kernel version 5.9-rc7.
For DT binding details see:
- Documentation/devicetree/bindings/clock/ti/divider.txt

Signed-off-by: Dario Binacchi <dariobin@libero.it>

Revert "Merge patch series "arm: dts: am62-beagleplay: Fix Beagleplay Ethernet""

When bringing in the series 'arm: dts: am62-beagleplay: Fix Beagleplay
Ethernet"' I failed to notice that b4 noticed it was based on next and
so took that as the base commit and merged that part of next to master.

This reverts commit c8ffd1356d42223cbb8c86280a083cc3c93e6426, reversing
changes made to 2ee6f3a5f7550de3599faef9704e166e5dcace35.

Reported-by: Jonas Karlman <jonas@kwiboo.se>
Signed-off-by: Tom Rini <trini@konsulko.com>

clk: Remove <common.h> and add needed includes

Remove <common.h> from this driver directory and when needed
add missing include files directly.

Signed-off-by: Tom Rini <trini@konsulko.com>

clk: ti: change clk_ti_latch() signature

The clock access functions exported by the clk header use the
struct clk_ti_reg parameter to get the address of the register. This
must also apply to clk_ti_latch(). Changes to TI's clk-mux and
clk-divider drivers prevented the patch from generating compile errors.

Signed-off-by: Dario Binacchi <dariobin@libero.it>

dm: fix build errors generated by last merges

Something was wrong in the merge process into the mainline.
Some added patches access driver structure fields and functions that
have been modified by previous patches.
The patch renames:
- dev_get_platdata to dev_get_plat
- dev_get_uclass_platdata to dev_get_uclass_plat
- ofdata_to_platdata to of_to_plat
- plat_data_alloc_size to plat_auto
- priv_auto_alloc_size to priv_auto
- video_uc_platdata to video_uc_plat

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: ti: add divider clock driver

The patch adds support for TI divider clock binding. The driver uses
routines provided by the common clock framework (ccf).

The code is based on the drivers/clk/ti/divider.c driver of the Linux
kernel version 5.9-rc7.
For DT binding details see:
- Documentation/devicetree/bindings/clock/ti/divider.txt

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: Remove <common.h> and add needed includes

Remove <common.h> from this driver directory and when needed
add missing include files directly.

Signed-off-by: Tom Rini <trini@konsulko.com>

clk: ti: change clk_ti_latch() signature

The clock access functions exported by the clk header use the
struct clk_ti_reg parameter to get the address of the register. This
must also apply to clk_ti_latch(). Changes to TI's clk-mux and
clk-divider drivers prevented the patch from generating compile errors.

Signed-off-by: Dario Binacchi <dariobin@libero.it>

dm: fix build errors generated by last merges

Something was wrong in the merge process into the mainline.
Some added patches access driver structure fields and functions that
have been modified by previous patches.
The patch renames:
- dev_get_platdata to dev_get_plat
- dev_get_uclass_platdata to dev_get_uclass_plat
- ofdata_to_platdata to of_to_plat
- plat_data_alloc_size to plat_auto
- priv_auto_alloc_size to priv_auto
- video_uc_platdata to video_uc_plat

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: ti: add divider clock driver

The patch adds support for TI divider clock binding. The driver uses
routines provided by the common clock framework (ccf).

The code is based on the drivers/clk/ti/divider.c driver of the Linux
kernel version 5.9-rc7.
For DT binding details see:
- Documentation/devicetree/bindings/clock/ti/divider.txt

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: Remove <common.h> and add needed includes

Remove <common.h> from this driver directory and when needed
add missing include files directly.

Signed-off-by: Tom Rini <trini@konsulko.com>

clk: ti: change clk_ti_latch() signature

The clock access functions exported by the clk header use the
struct clk_ti_reg parameter to get the address of the register. This
must also apply to clk_ti_latch(). Changes to TI's clk-mux and
clk-divider drivers prevented the patch from generating compile errors.

Signed-off-by: Dario Binacchi <dariobin@libero.it>

dm: fix build errors generated by last merges

Something was wrong in the merge process into the mainline.
Some added patches access driver structure fields and functions that
have been modified by previous patches.
The patch renames:
- dev_get_platdata to dev_get_plat
- dev_get_uclass_platdata to dev_get_uclass_plat
- ofdata_to_platdata to of_to_plat
- plat_data_alloc_size to plat_auto
- priv_auto_alloc_size to priv_auto
- video_uc_platdata to video_uc_plat

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: ti: add divider clock driver

The patch adds support for TI divider clock binding. The driver uses
routines provided by the common clock framework (ccf).

The code is based on the drivers/clk/ti/divider.c driver of the Linux
kernel version 5.9-rc7.
For DT binding details see:
- Documentation/devicetree/bindings/clock/ti/divider.txt

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: Remove <common.h> and add needed includes

Remove <common.h> from this driver directory and when needed
add missing include files directly.

Signed-off-by: Tom Rini <trini@konsulko.com>

clk: ti: change clk_ti_latch() signature

The clock access functions exported by the clk header use the
struct clk_ti_reg parameter to get the address of the register. This
must also apply to clk_ti_latch(). Changes to TI's clk-mux and
clk-divider drivers prevented the patch from generating compile errors.

Signed-off-by: Dario Binacchi <dariobin@libero.it>

dm: fix build errors generated by last merges

Something was wrong in the merge process into the mainline.
Some added patches access driver structure fields and functions that
have been modified by previous patches.
The patch renames:
- dev_get_platdata to dev_get_plat
- dev_get_uclass_platdata to dev_get_uclass_plat
- ofdata_to_platdata to of_to_plat
- plat_data_alloc_size to plat_auto
- priv_auto_alloc_size to priv_auto
- video_uc_platdata to video_uc_plat

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: ti: add divider clock driver

The patch adds support for TI divider clock binding. The driver uses
routines provided by the common clock framework (ccf).

The code is based on the drivers/clk/ti/divider.c driver of the Linux
kernel version 5.9-rc7.
For DT binding details see:
- Documentation/devicetree/bindings/clock/ti/divider.txt

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: Remove <common.h> and add needed includes

Remove <common.h> from this driver directory and when needed
add missing include files directly.

Signed-off-by: Tom Rini <trini@konsulko.com>

clk: ti: change clk_ti_latch() signature

The clock access functions exported by the clk header use the
struct clk_ti_reg parameter to get the address of the register. This
must also apply to clk_ti_latch(). Changes to TI's clk-mux and
clk-divider drivers prevented the patch from generating compile errors.

Signed-off-by: Dario Binacchi <dariobin@libero.it>

dm: fix build errors generated by last merges

Something was wrong in the merge process into the mainline.
Some added patches access driver structure fields and functions that
have been modified by previous patches.
The patch renames:
- dev_get_platdata to dev_get_plat
- dev_get_uclass_platdata to dev_get_uclass_plat
- ofdata_to_platdata to of_to_plat
- plat_data_alloc_size to plat_auto
- priv_auto_alloc_size to priv_auto
- video_uc_platdata to video_uc_plat

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: ti: add divider clock driver

The patch adds support for TI divider clock binding. The driver uses
routines provided by the common clock framework (ccf).

The code is based on the drivers/clk/ti/divider.c driver of the Linux
kernel version 5.9-rc7.
For DT binding details see:
- Documentation/devicetree/bindings/clock/ti/divider.txt

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: ti: change clk_ti_latch() signature

The clock access functions exported by the clk header use the
struct clk_ti_reg parameter to get the address of the register. This
must also apply to clk_ti_latch(). Changes to TI's clk-mux and
clk-divider drivers prevented the patch from generating compile errors.

Signed-off-by: Dario Binacchi <dariobin@libero.it>

dm: fix build errors generated by last merges

Something was wrong in the merge process into the mainline.
Some added patches access driver structure fields and functions that
have been modified by previous patches.
The patch renames:
- dev_get_platdata to dev_get_plat
- dev_get_uclass_platdata to dev_get_uclass_plat
- ofdata_to_platdata to of_to_plat
- plat_data_alloc_size to plat_auto
- priv_auto_alloc_size to priv_auto
- video_uc_platdata to video_uc_plat

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: ti: add divider clock driver

The patch adds support for TI divider clock binding. The driver uses
routines provided by the common clock framework (ccf).

The code is based on the drivers/clk/ti/divider.c driver of the Linux
kernel version 5.9-rc7.
For DT binding details see:
- Documentation/devicetree/bindings/clock/ti/divider.txt

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: ti: change clk_ti_latch() signature

The clock access functions exported by the clk header use the
struct clk_ti_reg parameter to get the address of the register. This
must also apply to clk_ti_latch(). Changes to TI's clk-mux and
clk-divider drivers prevented the patch from generating compile errors.

Signed-off-by: Dario Binacchi <dariobin@libero.it>

dm: fix build errors generated by last merges

Something was wrong in the merge process into the mainline.
Some added patches access driver structure fields and functions that
have been modified by previous patches.
The patch renames:
- dev_get_platdata to dev_get_plat
- dev_get_uclass_platdata to dev_get_uclass_plat
- ofdata_to_platdata to of_to_plat
- plat_data_alloc_size to plat_auto
- priv_auto_alloc_size to priv_auto
- video_uc_platdata to video_uc_plat

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: ti: add divider clock driver

The patch adds support for TI divider clock binding. The driver uses
routines provided by the common clock framework (ccf).

The code is based on the drivers/clk/ti/divider.c driver of the Linux
kernel version 5.9-rc7.
For DT binding details see:
- Documentation/devicetree/bindings/clock/ti/divider.txt

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: ti: change clk_ti_latch() signature

The clock access functions exported by the clk header use the
struct clk_ti_reg parameter to get the address of the register. This
must also apply to clk_ti_latch(). Changes to TI's clk-mux and
clk-divider drivers prevented the patch from generating compile errors.

Signed-off-by: Dario Binacchi <dariobin@libero.it>

dm: fix build errors generated by last merges

Something was wrong in the merge process into the mainline.
Some added patches access driver structure fields and functions that
have been modified by previous patches.
The patch renames:
- dev_get_platdata to dev_get_plat
- dev_get_uclass_platdata to dev_get_uclass_plat
- ofdata_to_platdata to of_to_plat
- plat_data_alloc_size to plat_auto
- priv_auto_alloc_size to priv_auto
- video_uc_platdata to video_uc_plat

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: ti: add divider clock driver

The patch adds support for TI divider clock binding. The driver uses
routines provided by the common clock framework (ccf).

The code is based on the drivers/clk/ti/divider.c driver of the Linux
kernel version 5.9-rc7.
For DT binding details see:
- Documentation/devicetree/bindings/clock/ti/divider.txt

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: ti: change clk_ti_latch() signature

The clock access functions exported by the clk header use the
struct clk_ti_reg parameter to get the address of the register. This
must also apply to clk_ti_latch(). Changes to TI's clk-mux and
clk-divider drivers prevented the patch from generating compile errors.

Signed-off-by: Dario Binacchi <dariobin@libero.it>

dm: fix build errors generated by last merges

Something was wrong in the merge process into the mainline.
Some added patches access driver structure fields and functions that
have been modified by previous patches.
The patch renames:
- dev_get_platdata to dev_get_plat
- dev_get_uclass_platdata to dev_get_uclass_plat
- ofdata_to_platdata to of_to_plat
- plat_data_alloc_size to plat_auto
- priv_auto_alloc_size to priv_auto
- video_uc_platdata to video_uc_plat

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: ti: add divider clock driver

The patch adds support for TI divider clock binding. The driver uses
routines provided by the common clock framework (ccf).

The code is based on the drivers/clk/ti/divider.c driver of the Linux
kernel version 5.9-rc7.
For DT binding details see:
- Documentation/devicetree/bindings/clock/ti/divider.txt

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: ti: change clk_ti_latch() signature

The clock access functions exported by the clk header use the
struct clk_ti_reg parameter to get the address of the register. This
must also apply to clk_ti_latch(). Changes to TI's clk-mux and
clk-divider drivers prevented the patch from generating compile errors.

Signed-off-by: Dario Binacchi <dariobin@libero.it>

dm: fix build errors generated by last merges

Something was wrong in the merge process into the mainline.
Some added patches access driver structure fields and functions that
have been modified by previous patches.
The patch renames:
- dev_get_platdata to dev_get_plat
- dev_get_uclass_platdata to dev_get_uclass_plat
- ofdata_to_platdata to of_to_plat
- plat_data_alloc_size to plat_auto
- priv_auto_alloc_size to priv_auto
- video_uc_platdata to video_uc_plat

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: ti: add divider clock driver

The patch adds support for TI divider clock binding. The driver uses
routines provided by the common clock framework (ccf).

The code is based on the drivers/clk/ti/divider.c driver of the Linux
kernel version 5.9-rc7.
For DT binding details see:
- Documentation/devicetree/bindings/clock/ti/divider.txt

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: ti: change clk_ti_latch() signature

The clock access functions exported by the clk header use the
struct clk_ti_reg parameter to get the address of the register. This
must also apply to clk_ti_latch(). Changes to TI's clk-mux and
clk-divider drivers prevented the patch from generating compile errors.

Signed-off-by: Dario Binacchi <dariobin@libero.it>

dm: fix build errors generated by last merges

Something was wrong in the merge process into the mainline.
Some added patches access driver structure fields and functions that
have been modified by previous patches.
The patch renames:
- dev_get_platdata to dev_get_plat
- dev_get_uclass_platdata to dev_get_uclass_plat
- ofdata_to_platdata to of_to_plat
- plat_data_alloc_size to plat_auto
- priv_auto_alloc_size to priv_auto
- video_uc_platdata to video_uc_plat

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: ti: add divider clock driver

The patch adds support for TI divider clock binding. The driver uses
routines provided by the common clock framework (ccf).

The code is based on the drivers/clk/ti/divider.c driver of the Linux
kernel version 5.9-rc7.
For DT binding details see:
- Documentation/devicetree/bindings/clock/ti/divider.txt

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: ti: change clk_ti_latch() signature

The clock access functions exported by the clk header use the
struct clk_ti_reg parameter to get the address of the register. This
must also apply to clk_ti_latch(). Changes to TI's clk-mux and
clk-divider drivers prevented the patch from generating compile errors.

Signed-off-by: Dario Binacchi <dariobin@libero.it>

dm: fix build errors generated by last merges

Something was wrong in the merge process into the mainline.
Some added patches access driver structure fields and functions that
have been modified by previous patches.
The patch renames:
- dev_get_platdata to dev_get_plat
- dev_get_uclass_platdata to dev_get_uclass_plat
- ofdata_to_platdata to of_to_plat
- plat_data_alloc_size to plat_auto
- priv_auto_alloc_size to priv_auto
- video_uc_platdata to video_uc_plat

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: ti: add divider clock driver

The patch adds support for TI divider clock binding. The driver uses
routines provided by the common clock framework (ccf).

The code is based on the drivers/clk/ti/divider.c driver of the Linux
kernel version 5.9-rc7.
For DT binding details see:
- Documentation/devicetree/bindings/clock/ti/divider.txt

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: ti: change clk_ti_latch() signature

The clock access functions exported by the clk header use the
struct clk_ti_reg parameter to get the address of the register. This
must also apply to clk_ti_latch(). Changes to TI's clk-mux and
clk-divider drivers prevented the patch from generating compile errors.

Signed-off-by: Dario Binacchi <dariobin@libero.it>

dm: fix build errors generated by last merges

Something was wrong in the merge process into the mainline.
Some added patches access driver structure fields and functions that
have been modified by previous patches.
The patch renames:
- dev_get_platdata to dev_get_plat
- dev_get_uclass_platdata to dev_get_uclass_plat
- ofdata_to_platdata to of_to_plat
- plat_data_alloc_size to plat_auto
- priv_auto_alloc_size to priv_auto
- video_uc_platdata to video_uc_plat

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: ti: add divider clock driver

The patch adds support for TI divider clock binding. The driver uses
routines provided by the common clock framework (ccf).

The code is based on the drivers/clk/ti/divider.c driver of the Linux
kernel version 5.9-rc7.
For DT binding details see:
- Documentation/devicetree/bindings/clock/ti/divider.txt

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: ti: change clk_ti_latch() signature

The clock access functions exported by the clk header use the
struct clk_ti_reg parameter to get the address of the register. This
must also apply to clk_ti_latch(). Changes to TI's clk-mux and
clk-divider drivers prevented the patch from generating compile errors.

Signed-off-by: Dario Binacchi <dariobin@libero.it>

dm: fix build errors generated by last merges

Something was wrong in the merge process into the mainline.
Some added patches access driver structure fields and functions that
have been modified by previous patches.
The patch renames:
- dev_get_platdata to dev_get_plat
- dev_get_uclass_platdata to dev_get_uclass_plat
- ofdata_to_platdata to of_to_plat
- plat_data_alloc_size to plat_auto
- priv_auto_alloc_size to priv_auto
- video_uc_platdata to video_uc_plat

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: ti: add divider clock driver

The patch adds support for TI divider clock binding. The driver uses
routines provided by the common clock framework (ccf).

The code is based on the drivers/clk/ti/divider.c driver of the Linux
kernel version 5.9-rc7.
For DT binding details see:
- Documentation/devicetree/bindings/clock/ti/divider.txt

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: ti: change clk_ti_latch() signature

The clock access functions exported by the clk header use the
struct clk_ti_reg parameter to get the address of the register. This
must also apply to clk_ti_latch(). Changes to TI's clk-mux and
clk-divider drivers prevented the patch from generating compile errors.

Signed-off-by: Dario Binacchi <dariobin@libero.it>

dm: fix build errors generated by last merges

Something was wrong in the merge process into the mainline.
Some added patches access driver structure fields and functions that
have been modified by previous patches.
The patch renames:
- dev_get_platdata to dev_get_plat
- dev_get_uclass_platdata to dev_get_uclass_plat
- ofdata_to_platdata to of_to_plat
- plat_data_alloc_size to plat_auto
- priv_auto_alloc_size to priv_auto
- video_uc_platdata to video_uc_plat

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: ti: add divider clock driver

The patch adds support for TI divider clock binding. The driver uses
routines provided by the common clock framework (ccf).

The code is based on the drivers/clk/ti/divider.c driver of the Linux
kernel version 5.9-rc7.
For DT binding details see:
- Documentation/devicetree/bindings/clock/ti/divider.txt

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: ti: change clk_ti_latch() signature

The clock access functions exported by the clk header use the
struct clk_ti_reg parameter to get the address of the register. This
must also apply to clk_ti_latch(). Changes to TI's clk-mux and
clk-divider drivers prevented the patch from generating compile errors.

Signed-off-by: Dario Binacchi <dariobin@libero.it>

dm: fix build errors generated by last merges

Something was wrong in the merge process into the mainline.
Some added patches access driver structure fields and functions that
have been modified by previous patches.
The patch renames:
- dev_get_platdata to dev_get_plat
- dev_get_uclass_platdata to dev_get_uclass_plat
- ofdata_to_platdata to of_to_plat
- plat_data_alloc_size to plat_auto
- priv_auto_alloc_size to priv_auto
- video_uc_platdata to video_uc_plat

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: ti: add divider clock driver

The patch adds support for TI divider clock binding. The driver uses
routines provided by the common clock framework (ccf).

The code is based on the drivers/clk/ti/divider.c driver of the Linux
kernel version 5.9-rc7.
For DT binding details see:
- Documentation/devicetree/bindings/clock/ti/divider.txt

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: ti: change clk_ti_latch() signature

The clock access functions exported by the clk header use the
struct clk_ti_reg parameter to get the address of the register. This
must also apply to clk_ti_latch(). Changes to TI's clk-mux and
clk-divider drivers prevented the patch from generating compile errors.

Signed-off-by: Dario Binacchi <dariobin@libero.it>

dm: fix build errors generated by last merges

Something was wrong in the merge process into the mainline.
Some added patches access driver structure fields and functions that
have been modified by previous patches.
The patch renames:
- dev_get_platdata to dev_get_plat
- dev_get_uclass_platdata to dev_get_uclass_plat
- ofdata_to_platdata to of_to_plat
- plat_data_alloc_size to plat_auto
- priv_auto_alloc_size to priv_auto
- video_uc_platdata to video_uc_plat

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: ti: add divider clock driver

The patch adds support for TI divider clock binding. The driver uses
routines provided by the common clock framework (ccf).

The code is based on the drivers/clk/ti/divider.c driver of the Linux
kernel version 5.9-rc7.
For DT binding details see:
- Documentation/devicetree/bindings/clock/ti/divider.txt

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: ti: change clk_ti_latch() signature

The clock access functions exported by the clk header use the
struct clk_ti_reg parameter to get the address of the register. This
must also apply to clk_ti_latch(). Changes to TI's clk-mux and
clk-divider drivers prevented the patch from generating compile errors.

Signed-off-by: Dario Binacchi <dariobin@libero.it>

dm: fix build errors generated by last merges

Something was wrong in the merge process into the mainline.
Some added patches access driver structure fields and functions that
have been modified by previous patches.
The patch renames:
- dev_get_platdata to dev_get_plat
- dev_get_uclass_platdata to dev_get_uclass_plat
- ofdata_to_platdata to of_to_plat
- plat_data_alloc_size to plat_auto
- priv_auto_alloc_size to priv_auto
- video_uc_platdata to video_uc_plat

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: ti: add divider clock driver

The patch adds support for TI divider clock binding. The driver uses
routines provided by the common clock framework (ccf).

The code is based on the drivers/clk/ti/divider.c driver of the Linux
kernel version 5.9-rc7.
For DT binding details see:
- Documentation/devicetree/bindings/clock/ti/divider.txt

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: ti: change clk_ti_latch() signature

The clock access functions exported by the clk header use the
struct clk_ti_reg parameter to get the address of the register. This
must also apply to clk_ti_latch(). Changes to TI's clk-mux and
clk-divider drivers prevented the patch from generating compile errors.

Signed-off-by: Dario Binacchi <dariobin@libero.it>

dm: fix build errors generated by last merges

Something was wrong in the merge process into the mainline.
Some added patches access driver structure fields and functions that
have been modified by previous patches.
The patch renames:
- dev_get_platdata to dev_get_plat
- dev_get_uclass_platdata to dev_get_uclass_plat
- ofdata_to_platdata to of_to_plat
- plat_data_alloc_size to plat_auto
- priv_auto_alloc_size to priv_auto
- video_uc_platdata to video_uc_plat

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: ti: add divider clock driver

The patch adds support for TI divider clock binding. The driver uses
routines provided by the common clock framework (ccf).

The code is based on the drivers/clk/ti/divider.c driver of the Linux
kernel version 5.9-rc7.
For DT binding details see:
- Documentation/devicetree/bindings/clock/ti/divider.txt

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: ti: change clk_ti_latch() signature

The clock access functions exported by the clk header use the
struct clk_ti_reg parameter to get the address of the register. This
must also apply to clk_ti_latch(). Changes to TI's clk-mux and
clk-divider drivers prevented the patch from generating compile errors.

Signed-off-by: Dario Binacchi <dariobin@libero.it>

dm: fix build errors generated by last merges

Something was wrong in the merge process into the mainline.
Some added patches access driver structure fields and functions that
have been modified by previous patches.
The patch renames:
- dev_get_platdata to dev_get_plat
- dev_get_uclass_platdata to dev_get_uclass_plat
- ofdata_to_platdata to of_to_plat
- plat_data_alloc_size to plat_auto
- priv_auto_alloc_size to priv_auto
- video_uc_platdata to video_uc_plat

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: ti: add divider clock driver

The patch adds support for TI divider clock binding. The driver uses
routines provided by the common clock framework (ccf).

The code is based on the drivers/clk/ti/divider.c driver of the Linux
kernel version 5.9-rc7.
For DT binding details see:
- Documentation/devicetree/bindings/clock/ti/divider.txt

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: ti: change clk_ti_latch() signature

The clock access functions exported by the clk header use the
struct clk_ti_reg parameter to get the address of the register. This
must also apply to clk_ti_latch(). Changes to TI's clk-mux and
clk-divider drivers prevented the patch from generating compile errors.

Signed-off-by: Dario Binacchi <dariobin@libero.it>

dm: fix build errors generated by last merges

Something was wrong in the merge process into the mainline.
Some added patches access driver structure fields and functions that
have been modified by previous patches.
The patch renames:
- dev_get_platdata to dev_get_plat
- dev_get_uclass_platdata to dev_get_uclass_plat
- ofdata_to_platdata to of_to_plat
- plat_data_alloc_size to plat_auto
- priv_auto_alloc_size to priv_auto
- video_uc_platdata to video_uc_plat

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: ti: add divider clock driver

The patch adds support for TI divider clock binding. The driver uses
routines provided by the common clock framework (ccf).

The code is based on the drivers/clk/ti/divider.c driver of the Linux
kernel version 5.9-rc7.
For DT binding details see:
- Documentation/devicetree/bindings/clock/ti/divider.txt

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: ti: change clk_ti_latch() signature

The clock access functions exported by the clk header use the
struct clk_ti_reg parameter to get the address of the register. This
must also apply to clk_ti_latch(). Changes to TI's clk-mux and
clk-divider drivers prevented the patch from generating compile errors.

Signed-off-by: Dario Binacchi <dariobin@libero.it>

dm: fix build errors generated by last merges

Something was wrong in the merge process into the mainline.
Some added patches access driver structure fields and functions that
have been modified by previous patches.
The patch renames:
- dev_get_platdata to dev_get_plat
- dev_get_uclass_platdata to dev_get_uclass_plat
- ofdata_to_platdata to of_to_plat
- plat_data_alloc_size to plat_auto
- priv_auto_alloc_size to priv_auto
- video_uc_platdata to video_uc_plat

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: ti: add divider clock driver

The patch adds support for TI divider clock binding. The driver uses
routines provided by the common clock framework (ccf).

The code is based on the drivers/clk/ti/divider.c driver of the Linux
kernel version 5.9-rc7.
For DT binding details see:
- Documentation/devicetree/bindings/clock/ti/divider.txt

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: ti: change clk_ti_latch() signature

The clock access functions exported by the clk header use the
struct clk_ti_reg parameter to get the address of the register. This
must also apply to clk_ti_latch(). Changes to TI's clk-mux and
clk-divider drivers prevented the patch from generating compile errors.

Signed-off-by: Dario Binacchi <dariobin@libero.it>

dm: fix build errors generated by last merges

Something was wrong in the merge process into the mainline.
Some added patches access driver structure fields and functions that
have been modified by previous patches.
The patch renames:
- dev_get_platdata to dev_get_plat
- dev_get_uclass_platdata to dev_get_uclass_plat
- ofdata_to_platdata to of_to_plat
- plat_data_alloc_size to plat_auto
- priv_auto_alloc_size to priv_auto
- video_uc_platdata to video_uc_plat

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: ti: add divider clock driver

The patch adds support for TI divider clock binding. The driver uses
routines provided by the common clock framework (ccf).

The code is based on the drivers/clk/ti/divider.c driver of the Linux
kernel version 5.9-rc7.
For DT binding details see:
- Documentation/devicetree/bindings/clock/ti/divider.txt

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: ti: change clk_ti_latch() signature

The clock access functions exported by the clk header use the
struct clk_ti_reg parameter to get the address of the register. This
must also apply to clk_ti_latch(). Changes to TI's clk-mux and
clk-divider drivers prevented the patch from generating compile errors.

Signed-off-by: Dario Binacchi <dariobin@libero.it>

dm: fix build errors generated by last merges

Something was wrong in the merge process into the mainline.
Some added patches access driver structure fields and functions that
have been modified by previous patches.
The patch renames:
- dev_get_platdata to dev_get_plat
- dev_get_uclass_platdata to dev_get_uclass_plat
- ofdata_to_platdata to of_to_plat
- plat_data_alloc_size to plat_auto
- priv_auto_alloc_size to priv_auto
- video_uc_platdata to video_uc_plat

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: ti: add divider clock driver

The patch adds support for TI divider clock binding. The driver uses
routines provided by the common clock framework (ccf).

The code is based on the drivers/clk/ti/divider.c driver of the Linux
kernel version 5.9-rc7.
For DT binding details see:
- Documentation/devicetree/bindings/clock/ti/divider.txt

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: ti: change clk_ti_latch() signature

The clock access functions exported by the clk header use the
struct clk_ti_reg parameter to get the address of the register. This
must also apply to clk_ti_latch(). Changes to TI's clk-mux and
clk-divider drivers prevented the patch from generating compile errors.

Signed-off-by: Dario Binacchi <dariobin@libero.it>

dm: fix build errors generated by last merges

Something was wrong in the merge process into the mainline.
Some added patches access driver structure fields and functions that
have been modified by previous patches.
The patch renames:
- dev_get_platdata to dev_get_plat
- dev_get_uclass_platdata to dev_get_uclass_plat
- ofdata_to_platdata to of_to_plat
- plat_data_alloc_size to plat_auto
- priv_auto_alloc_size to priv_auto
- video_uc_platdata to video_uc_plat

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: ti: add divider clock driver

The patch adds support for TI divider clock binding. The driver uses
routines provided by the common clock framework (ccf).

The code is based on the drivers/clk/ti/divider.c driver of the Linux
kernel version 5.9-rc7.
For DT binding details see:
- Documentation/devicetree/bindings/clock/ti/divider.txt

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: ti: change clk_ti_latch() signature

The clock access functions exported by the clk header use the
struct clk_ti_reg parameter to get the address of the register. This
must also apply to clk_ti_latch(). Changes to TI's clk-mux and
clk-divider drivers prevented the patch from generating compile errors.

Signed-off-by: Dario Binacchi <dariobin@libero.it>

dm: fix build errors generated by last merges

Something was wrong in the merge process into the mainline.
Some added patches access driver structure fields and functions that
have been modified by previous patches.
The patch renames:
- dev_get_platdata to dev_get_plat
- dev_get_uclass_platdata to dev_get_uclass_plat
- ofdata_to_platdata to of_to_plat
- plat_data_alloc_size to plat_auto
- priv_auto_alloc_size to priv_auto
- video_uc_platdata to video_uc_plat

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: ti: add divider clock driver

The patch adds support for TI divider clock binding. The driver uses
routines provided by the common clock framework (ccf).

The code is based on the drivers/clk/ti/divider.c driver of the Linux
kernel version 5.9-rc7.
For DT binding details see:
- Documentation/devicetree/bindings/clock/ti/divider.txt

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: ti: change clk_ti_latch() signature

The clock access functions exported by the clk header use the
struct clk_ti_reg parameter to get the address of the register. This
must also apply to clk_ti_latch(). Changes to TI's clk-mux and
clk-divider drivers prevented the patch from generating compile errors.

Signed-off-by: Dario Binacchi <dariobin@libero.it>

dm: fix build errors generated by last merges

Something was wrong in the merge process into the mainline.
Some added patches access driver structure fields and functions that
have been modified by previous patches.
The patch renames:
- dev_get_platdata to dev_get_plat
- dev_get_uclass_platdata to dev_get_uclass_plat
- ofdata_to_platdata to of_to_plat
- plat_data_alloc_size to plat_auto
- priv_auto_alloc_size to priv_auto
- video_uc_platdata to video_uc_plat

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: ti: add divider clock driver

The patch adds support for TI divider clock binding. The driver uses
routines provided by the common clock framework (ccf).

The code is based on the drivers/clk/ti/divider.c driver of the Linux
kernel version 5.9-rc7.
For DT binding details see:
- Documentation/devicetree/bindings/clock/ti/divider.txt

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: ti: change clk_ti_latch() signature

The clock access functions exported by the clk header use the
struct clk_ti_reg parameter to get the address of the register. This
must also apply to clk_ti_latch(). Changes to TI's clk-mux and
clk-divider drivers prevented the patch from generating compile errors.

Signed-off-by: Dario Binacchi <dariobin@libero.it>

dm: fix build errors generated by last merges

Something was wrong in the merge process into the mainline.
Some added patches access driver structure fields and functions that
have been modified by previous patches.
The patch renames:
- dev_get_platdata to dev_get_plat
- dev_get_uclass_platdata to dev_get_uclass_plat
- ofdata_to_platdata to of_to_plat
- plat_data_alloc_size to plat_auto
- priv_auto_alloc_size to priv_auto
- video_uc_platdata to video_uc_plat

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: ti: add divider clock driver

The patch adds support for TI divider clock binding. The driver uses
routines provided by the common clock framework (ccf).

The code is based on the drivers/clk/ti/divider.c driver of the Linux
kernel version 5.9-rc7.
For DT binding details see:
- Documentation/devicetree/bindings/clock/ti/divider.txt

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: ti: change clk_ti_latch() signature

The clock access functions exported by the clk header use the
struct clk_ti_reg parameter to get the address of the register. This
must also apply to clk_ti_latch(). Changes to TI's clk-mux and
clk-divider drivers prevented the patch from generating compile errors.

Signed-off-by: Dario Binacchi <dariobin@libero.it>

dm: fix build errors generated by last merges

Something was wrong in the merge process into the mainline.
Some added patches access driver structure fields and functions that
have been modified by previous patches.
The patch renames:
- dev_get_platdata to dev_get_plat
- dev_get_uclass_platdata to dev_get_uclass_plat
- ofdata_to_platdata to of_to_plat
- plat_data_alloc_size to plat_auto
- priv_auto_alloc_size to priv_auto
- video_uc_platdata to video_uc_plat

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: ti: add divider clock driver

The patch adds support for TI divider clock binding. The driver uses
routines provided by the common clock framework (ccf).

The code is based on the drivers/clk/ti/divider.c driver of the Linux
kernel version 5.9-rc7.
For DT binding details see:
- Documentation/devicetree/bindings/clock/ti/divider.txt

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: ti: change clk_ti_latch() signature

The clock access functions exported by the clk header use the
struct clk_ti_reg parameter to get the address of the register. This
must also apply to clk_ti_latch(). Changes to TI's clk-mux and
clk-divider drivers prevented the patch from generating compile errors.

Signed-off-by: Dario Binacchi <dariobin@libero.it>

dm: fix build errors generated by last merges

Something was wrong in the merge process into the mainline.
Some added patches access driver structure fields and functions that
have been modified by previous patches.
The patch renames:
- dev_get_platdata to dev_get_plat
- dev_get_uclass_platdata to dev_get_uclass_plat
- ofdata_to_platdata to of_to_plat
- plat_data_alloc_size to plat_auto
- priv_auto_alloc_size to priv_auto
- video_uc_platdata to video_uc_plat

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: ti: add divider clock driver

The patch adds support for TI divider clock binding. The driver uses
routines provided by the common clock framework (ccf).

The code is based on the drivers/clk/ti/divider.c driver of the Linux
kernel version 5.9-rc7.
For DT binding details see:
- Documentation/devicetree/bindings/clock/ti/divider.txt

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: ti: change clk_ti_latch() signature

The clock access functions exported by the clk header use the
struct clk_ti_reg parameter to get the address of the register. This
must also apply to clk_ti_latch(). Changes to TI's clk-mux and
clk-divider drivers prevented the patch from generating compile errors.

Signed-off-by: Dario Binacchi <dariobin@libero.it>

dm: fix build errors generated by last merges

Something was wrong in the merge process into the mainline.
Some added patches access driver structure fields and functions that
have been modified by previous patches.
The patch renames:
- dev_get_platdata to dev_get_plat
- dev_get_uclass_platdata to dev_get_uclass_plat
- ofdata_to_platdata to of_to_plat
- plat_data_alloc_size to plat_auto
- priv_auto_alloc_size to priv_auto
- video_uc_platdata to video_uc_plat

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: ti: add divider clock driver

The patch adds support for TI divider clock binding. The driver uses
routines provided by the common clock framework (ccf).

The code is based on the drivers/clk/ti/divider.c driver of the Linux
kernel version 5.9-rc7.
For DT binding details see:
- Documentation/devicetree/bindings/clock/ti/divider.txt

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: ti: change clk_ti_latch() signature

The clock access functions exported by the clk header use the
struct clk_ti_reg parameter to get the address of the register. This
must also apply to clk_ti_latch(). Changes to TI's clk-mux and
clk-divider drivers prevented the patch from generating compile errors.

Signed-off-by: Dario Binacchi <dariobin@libero.it>

dm: fix build errors generated by last merges

Something was wrong in the merge process into the mainline.
Some added patches access driver structure fields and functions that
have been modified by previous patches.
The patch renames:
- dev_get_platdata to dev_get_plat
- dev_get_uclass_platdata to dev_get_uclass_plat
- ofdata_to_platdata to of_to_plat
- plat_data_alloc_size to plat_auto
- priv_auto_alloc_size to priv_auto
- video_uc_platdata to video_uc_plat

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: ti: add divider clock driver

The patch adds support for TI divider clock binding. The driver uses
routines provided by the common clock framework (ccf).

The code is based on the drivers/clk/ti/divider.c driver of the Linux
kernel version 5.9-rc7.
For DT binding details see:
- Documentation/devicetree/bindings/clock/ti/divider.txt

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: ti: change clk_ti_latch() signature

The clock access functions exported by the clk header use the
struct clk_ti_reg parameter to get the address of the register. This
must also apply to clk_ti_latch(). Changes to TI's clk-mux and
clk-divider drivers prevented the patch from generating compile errors.

Signed-off-by: Dario Binacchi <dariobin@libero.it>

dm: fix build errors generated by last merges

Something was wrong in the merge process into the mainline.
Some added patches access driver structure fields and functions that
have been modified by previous patches.
The patch renames:
- dev_get_platdata to dev_get_plat
- dev_get_uclass_platdata to dev_get_uclass_plat
- ofdata_to_platdata to of_to_plat
- plat_data_alloc_size to plat_auto
- priv_auto_alloc_size to priv_auto
- video_uc_platdata to video_uc_plat

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: ti: add divider clock driver

The patch adds support for TI divider clock binding. The driver uses
routines provided by the common clock framework (ccf).

The code is based on the drivers/clk/ti/divider.c driver of the Linux
kernel version 5.9-rc7.
For DT binding details see:
- Documentation/devicetree/bindings/clock/ti/divider.txt

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: ti: change clk_ti_latch() signature

The clock access functions exported by the clk header use the
struct clk_ti_reg parameter to get the address of the register. This
must also apply to clk_ti_latch(). Changes to TI's clk-mux and
clk-divider drivers prevented the patch from generating compile errors.

Signed-off-by: Dario Binacchi <dariobin@libero.it>

dm: fix build errors generated by last merges

Something was wrong in the merge process into the mainline.
Some added patches access driver structure fields and functions that
have been modified by previous patches.
The patch renames:
- dev_get_platdata to dev_get_plat
- dev_get_uclass_platdata to dev_get_uclass_plat
- ofdata_to_platdata to of_to_plat
- plat_data_alloc_size to plat_auto
- priv_auto_alloc_size to priv_auto
- video_uc_platdata to video_uc_plat

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: ti: add divider clock driver

The patch adds support for TI divider clock binding. The driver uses
routines provided by the common clock framework (ccf).

The code is based on the drivers/clk/ti/divider.c driver of the Linux
kernel version 5.9-rc7.
For DT binding details see:
- Documentation/devicetree/bindings/clock/ti/divider.txt

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: ti: change clk_ti_latch() signature

The clock access functions exported by the clk header use the
struct clk_ti_reg parameter to get the address of the register. This
must also apply to clk_ti_latch(). Changes to TI's clk-mux and
clk-divider drivers prevented the patch from generating compile errors.

Signed-off-by: Dario Binacchi <dariobin@libero.it>

dm: fix build errors generated by last merges

Something was wrong in the merge process into the mainline.
Some added patches access driver structure fields and functions that
have been modified by previous patches.
The patch renames:
- dev_get_platdata to dev_get_plat
- dev_get_uclass_platdata to dev_get_uclass_plat
- ofdata_to_platdata to of_to_plat
- plat_data_alloc_size to plat_auto
- priv_auto_alloc_size to priv_auto
- video_uc_platdata to video_uc_plat

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: ti: add divider clock driver

The patch adds support for TI divider clock binding. The driver uses
routines provided by the common clock framework (ccf).

The code is based on the drivers/clk/ti/divider.c driver of the Linux
kernel version 5.9-rc7.
For DT binding details see:
- Documentation/devicetree/bindings/clock/ti/divider.txt

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: ti: change clk_ti_latch() signature

The clock access functions exported by the clk header use the
struct clk_ti_reg parameter to get the address of the register. This
must also apply to clk_ti_latch(). Changes to TI's clk-mux and
clk-divider drivers prevented the patch from generating compile errors.

Signed-off-by: Dario Binacchi <dariobin@libero.it>

dm: fix build errors generated by last merges

Something was wrong in the merge process into the mainline.
Some added patches access driver structure fields and functions that
have been modified by previous patches.
The patch renames:
- dev_get_platdata to dev_get_plat
- dev_get_uclass_platdata to dev_get_uclass_plat
- ofdata_to_platdata to of_to_plat
- plat_data_alloc_size to plat_auto
- priv_auto_alloc_size to priv_auto
- video_uc_platdata to video_uc_plat

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: ti: add divider clock driver

The patch adds support for TI divider clock binding. The driver uses
routines provided by the common clock framework (ccf).

The code is based on the drivers/clk/ti/divider.c driver of the Linux
kernel version 5.9-rc7.
For DT binding details see:
- Documentation/devicetree/bindings/clock/ti/divider.txt

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: ti: change clk_ti_latch() signature

The clock access functions exported by the clk header use the
struct clk_ti_reg parameter to get the address of the register. This
must also apply to clk_ti_latch(). Changes to TI's clk-mux and
clk-divider drivers prevented the patch from generating compile errors.

Signed-off-by: Dario Binacchi <dariobin@libero.it>

dm: fix build errors generated by last merges

Something was wrong in the merge process into the mainline.
Some added patches access driver structure fields and functions that
have been modified by previous patches.
The patch renames:
- dev_get_platdata to dev_get_plat
- dev_get_uclass_platdata to dev_get_uclass_plat
- ofdata_to_platdata to of_to_plat
- plat_data_alloc_size to plat_auto
- priv_auto_alloc_size to priv_auto
- video_uc_platdata to video_uc_plat

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: ti: add divider clock driver

The patch adds support for TI divider clock binding. The driver uses
routines provided by the common clock framework (ccf).

The code is based on the drivers/clk/ti/divider.c driver of the Linux
kernel version 5.9-rc7.
For DT binding details see:
- Documentation/devicetree/bindings/clock/ti/divider.txt

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: ti: change clk_ti_latch() signature

The clock access functions exported by the clk header use the
struct clk_ti_reg parameter to get the address of the register. This
must also apply to clk_ti_latch(). Changes to TI's clk-mux and
clk-divider drivers prevented the patch from generating compile errors.

Signed-off-by: Dario Binacchi <dariobin@libero.it>

dm: fix build errors generated by last merges

Something was wrong in the merge process into the mainline.
Some added patches access driver structure fields and functions that
have been modified by previous patches.
The patch renames:
- dev_get_platdata to dev_get_plat
- dev_get_uclass_platdata to dev_get_uclass_plat
- ofdata_to_platdata to of_to_plat
- plat_data_alloc_size to plat_auto
- priv_auto_alloc_size to priv_auto
- video_uc_platdata to video_uc_plat

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: ti: add divider clock driver

The patch adds support for TI divider clock binding. The driver uses
routines provided by the common clock framework (ccf).

The code is based on the drivers/clk/ti/divider.c driver of the Linux
kernel version 5.9-rc7.
For DT binding details see:
- Documentation/devicetree/bindings/clock/ti/divider.txt

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: ti: change clk_ti_latch() signature

The clock access functions exported by the clk header use the
struct clk_ti_reg parameter to get the address of the register. This
must also apply to clk_ti_latch(). Changes to TI's clk-mux and
clk-divider drivers prevented the patch from generating compile errors.

Signed-off-by: Dario Binacchi <dariobin@libero.it>

dm: fix build errors generated by last merges

Something was wrong in the merge process into the mainline.
Some added patches access driver structure fields and functions that
have been modified by previous patches.
The patch renames:
- dev_get_platdata to dev_get_plat
- dev_get_uclass_platdata to dev_get_uclass_plat
- ofdata_to_platdata to of_to_plat
- plat_data_alloc_size to plat_auto
- priv_auto_alloc_size to priv_auto
- video_uc_platdata to video_uc_plat

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: ti: add divider clock driver

The patch adds support for TI divider clock binding. The driver uses
routines provided by the common clock framework (ccf).

The code is based on the drivers/clk/ti/divider.c driver of the Linux
kernel version 5.9-rc7.
For DT binding details see:
- Documentation/devicetree/bindings/clock/ti/divider.txt

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: ti: change clk_ti_latch() signature

The clock access functions exported by the clk header use the
struct clk_ti_reg parameter to get the address of the register. This
must also apply to clk_ti_latch(). Changes to TI's clk-mux and
clk-divider drivers prevented the patch from generating compile errors.

Signed-off-by: Dario Binacchi <dariobin@libero.it>

dm: fix build errors generated by last merges

Something was wrong in the merge process into the mainline.
Some added patches access driver structure fields and functions that
have been modified by previous patches.
The patch renames:
- dev_get_platdata to dev_get_plat
- dev_get_uclass_platdata to dev_get_uclass_plat
- ofdata_to_platdata to of_to_plat
- plat_data_alloc_size to plat_auto
- priv_auto_alloc_size to priv_auto
- video_uc_platdata to video_uc_plat

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: ti: add divider clock driver

The patch adds support for TI divider clock binding. The driver uses
routines provided by the common clock framework (ccf).

The code is based on the drivers/clk/ti/divider.c driver of the Linux
kernel version 5.9-rc7.
For DT binding details see:
- Documentation/devicetree/bindings/clock/ti/divider.txt

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: ti: change clk_ti_latch() signature

The clock access functions exported by the clk header use the
struct clk_ti_reg parameter to get the address of the register. This
must also apply to clk_ti_latch(). Changes to TI's clk-mux and
clk-divider drivers prevented the patch from generating compile errors.

Signed-off-by: Dario Binacchi <dariobin@libero.it>

dm: fix build errors generated by last merges

Something was wrong in the merge process into the mainline.
Some added patches access driver structure fields and functions that
have been modified by previous patches.
The patch renames:
- dev_get_platdata to dev_get_plat
- dev_get_uclass_platdata to dev_get_uclass_plat
- ofdata_to_platdata to of_to_plat
- plat_data_alloc_size to plat_auto
- priv_auto_alloc_size to priv_auto
- video_uc_platdata to video_uc_plat

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: ti: add divider clock driver

The patch adds support for TI divider clock binding. The driver uses
routines provided by the common clock framework (ccf).

The code is based on the drivers/clk/ti/divider.c driver of the Linux
kernel version 5.9-rc7.
For DT binding details see:
- Documentation/devicetree/bindings/clock/ti/divider.txt

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: ti: change clk_ti_latch() signature

The clock access functions exported by the clk header use the
struct clk_ti_reg parameter to get the address of the register. This
must also apply to clk_ti_latch(). Changes to TI's clk-mux and
clk-divider drivers prevented the patch from generating compile errors.

Signed-off-by: Dario Binacchi <dariobin@libero.it>

dm: fix build errors generated by last merges

Something was wrong in the merge process into the mainline.
Some added patches access driver structure fields and functions that
have been modified by previous patches.
The patch renames:
- dev_get_platdata to dev_get_plat
- dev_get_uclass_platdata to dev_get_uclass_plat
- ofdata_to_platdata to of_to_plat
- plat_data_alloc_size to plat_auto
- priv_auto_alloc_size to priv_auto
- video_uc_platdata to video_uc_plat

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: ti: add divider clock driver

The patch adds support for TI divider clock binding. The driver uses
routines provided by the common clock framework (ccf).

The code is based on the drivers/clk/ti/divider.c driver of the Linux
kernel version 5.9-rc7.
For DT binding details see:
- Documentation/devicetree/bindings/clock/ti/divider.txt

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: ti: change clk_ti_latch() signature

The clock access functions exported by the clk header use the
struct clk_ti_reg parameter to get the address of the register. This
must also apply to clk_ti_latch(). Changes to TI's clk-mux and
clk-divider drivers prevented the patch from generating compile errors.

Signed-off-by: Dario Binacchi <dariobin@libero.it>

dm: fix build errors generated by last merges

Something was wrong in the merge process into the mainline.
Some added patches access driver structure fields and functions that
have been modified by previous patches.
The patch renames:
- dev_get_platdata to dev_get_plat
- dev_get_uclass_platdata to dev_get_uclass_plat
- ofdata_to_platdata to of_to_plat
- plat_data_alloc_size to plat_auto
- priv_auto_alloc_size to priv_auto
- video_uc_platdata to video_uc_plat

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: ti: add divider clock driver

The patch adds support for TI divider clock binding. The driver uses
routines provided by the common clock framework (ccf).

The code is based on the drivers/clk/ti/divider.c driver of the Linux
kernel version 5.9-rc7.
For DT binding details see:
- Documentation/devicetree/bindings/clock/ti/divider.txt

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: ti: change clk_ti_latch() signature

The clock access functions exported by the clk header use the
struct clk_ti_reg parameter to get the address of the register. This
must also apply to clk_ti_latch(). Changes to TI's clk-mux and
clk-divider drivers prevented the patch from generating compile errors.

Signed-off-by: Dario Binacchi <dariobin@libero.it>

dm: fix build errors generated by last merges

Something was wrong in the merge process into the mainline.
Some added patches access driver structure fields and functions that
have been modified by previous patches.
The patch renames:
- dev_get_platdata to dev_get_plat
- dev_get_uclass_platdata to dev_get_uclass_plat
- ofdata_to_platdata to of_to_plat
- plat_data_alloc_size to plat_auto
- priv_auto_alloc_size to priv_auto
- video_uc_platdata to video_uc_plat

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: ti: add divider clock driver

The patch adds support for TI divider clock binding. The driver uses
routines provided by the common clock framework (ccf).

The code is based on the drivers/clk/ti/divider.c driver of the Linux
kernel version 5.9-rc7.
For DT binding details see:
- Documentation/devicetree/bindings/clock/ti/divider.txt

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: ti: change clk_ti_latch() signature

The clock access functions exported by the clk header use the
struct clk_ti_reg parameter to get the address of the register. This
must also apply to clk_ti_latch(). Changes to TI's clk-mux and
clk-divider drivers prevented the patch from generating compile errors.

Signed-off-by: Dario Binacchi <dariobin@libero.it>

dm: fix build errors generated by last merges

Something was wrong in the merge process into the mainline.
Some added patches access driver structure fields and functions that
have been modified by previous patches.
The patch renames:
- dev_get_platdata to dev_get_plat
- dev_get_uclass_platdata to dev_get_uclass_plat
- ofdata_to_platdata to of_to_plat
- plat_data_alloc_size to plat_auto
- priv_auto_alloc_size to priv_auto
- video_uc_platdata to video_uc_plat

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: ti: add divider clock driver

The patch adds support for TI divider clock binding. The driver uses
routines provided by the common clock framework (ccf).

The code is based on the drivers/clk/ti/divider.c driver of the Linux
kernel version 5.9-rc7.
For DT binding details see:
- Documentation/devicetree/bindings/clock/ti/divider.txt

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: ti: change clk_ti_latch() signature

The clock access functions exported by the clk header use the
struct clk_ti_reg parameter to get the address of the register. This
must also apply to clk_ti_latch(). Changes to TI's clk-mux and
clk-divider drivers prevented the patch from generating compile errors.

Signed-off-by: Dario Binacchi <dariobin@libero.it>

dm: fix build errors generated by last merges

Something was wrong in the merge process into the mainline.
Some added patches access driver structure fields and functions that
have been modified by previous patches.
The patch renames:
- dev_get_platdata to dev_get_plat
- dev_get_uclass_platdata to dev_get_uclass_plat
- ofdata_to_platdata to of_to_plat
- plat_data_alloc_size to plat_auto
- priv_auto_alloc_size to priv_auto
- video_uc_platdata to video_uc_plat

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: ti: add divider clock driver

The patch adds support for TI divider clock binding. The driver uses
routines provided by the common clock framework (ccf).

The code is based on the drivers/clk/ti/divider.c driver of the Linux
kernel version 5.9-rc7.
For DT binding details see:
- Documentation/devicetree/bindings/clock/ti/divider.txt

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: ti: change clk_ti_latch() signature

The clock access functions exported by the clk header use the
struct clk_ti_reg parameter to get the address of the register. This
must also apply to clk_ti_latch(). Changes to TI's clk-mux and
clk-divider drivers prevented the patch from generating compile errors.

Signed-off-by: Dario Binacchi <dariobin@libero.it>

dm: fix build errors generated by last merges

Something was wrong in the merge process into the mainline.
Some added patches access driver structure fields and functions that
have been modified by previous patches.
The patch renames:
- dev_get_platdata to dev_get_plat
- dev_get_uclass_platdata to dev_get_uclass_plat
- ofdata_to_platdata to of_to_plat
- plat_data_alloc_size to plat_auto
- priv_auto_alloc_size to priv_auto
- video_uc_platdata to video_uc_plat

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: ti: add divider clock driver

The patch adds support for TI divider clock binding. The driver uses
routines provided by the common clock framework (ccf).

The code is based on the drivers/clk/ti/divider.c driver of the Linux
kernel version 5.9-rc7.
For DT binding details see:
- Documentation/devicetree/bindings/clock/ti/divider.txt

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: ti: change clk_ti_latch() signature

The clock access functions exported by the clk header use the
struct clk_ti_reg parameter to get the address of the register. This
must also apply to clk_ti_latch(). Changes to TI's clk-mux and
clk-divider drivers prevented the patch from generating compile errors.

Signed-off-by: Dario Binacchi <dariobin@libero.it>

dm: fix build errors generated by last merges

Something was wrong in the merge process into the mainline.
Some added patches access driver structure fields and functions that
have been modified by previous patches.
The patch renames:
- dev_get_platdata to dev_get_plat
- dev_get_uclass_platdata to dev_get_uclass_plat
- ofdata_to_platdata to of_to_plat
- plat_data_alloc_size to plat_auto
- priv_auto_alloc_size to priv_auto
- video_uc_platdata to video_uc_plat

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: ti: add divider clock driver

The patch adds support for TI divider clock binding. The driver uses
routines provided by the common clock framework (ccf).

The code is based on the drivers/clk/ti/divider.c driver of the Linux
kernel version 5.9-rc7.
For DT binding details see:
- Documentation/devicetree/bindings/clock/ti/divider.txt

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: ti: change clk_ti_latch() signature

The clock access functions exported by the clk header use the
struct clk_ti_reg parameter to get the address of the register. This
must also apply to clk_ti_latch(). Changes to TI's clk-mux and
clk-divider drivers prevented the patch from generating compile errors.

Signed-off-by: Dario Binacchi <dariobin@libero.it>

dm: fix build errors generated by last merges

Something was wrong in the merge process into the mainline.
Some added patches access driver structure fields and functions that
have been modified by previous patches.
The patch renames:
- dev_get_platdata to dev_get_plat
- dev_get_uclass_platdata to dev_get_uclass_plat
- ofdata_to_platdata to of_to_plat
- plat_data_alloc_size to plat_auto
- priv_auto_alloc_size to priv_auto
- video_uc_platdata to video_uc_plat

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: ti: add divider clock driver

The patch adds support for TI divider clock binding. The driver uses
routines provided by the common clock framework (ccf).

The code is based on the drivers/clk/ti/divider.c driver of the Linux
kernel version 5.9-rc7.
For DT binding details see:
- Documentation/devicetree/bindings/clock/ti/divider.txt

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: ti: change clk_ti_latch() signature

The clock access functions exported by the clk header use the
struct clk_ti_reg parameter to get the address of the register. This
must also apply to clk_ti_latch(). Changes to TI's clk-mux and
clk-divider drivers prevented the patch from generating compile errors.

Signed-off-by: Dario Binacchi <dariobin@libero.it>

dm: fix build errors generated by last merges

Something was wrong in the merge process into the mainline.
Some added patches access driver structure fields and functions that
have been modified by previous patches.
The patch renames:
- dev_get_platdata to dev_get_plat
- dev_get_uclass_platdata to dev_get_uclass_plat
- ofdata_to_platdata to of_to_plat
- plat_data_alloc_size to plat_auto
- priv_auto_alloc_size to priv_auto
- video_uc_platdata to video_uc_plat

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: ti: add divider clock driver

The patch adds support for TI divider clock binding. The driver uses
routines provided by the common clock framework (ccf).

The code is based on the drivers/clk/ti/divider.c driver of the Linux
kernel version 5.9-rc7.
For DT binding details see:
- Documentation/devicetree/bindings/clock/ti/divider.txt

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: ti: change clk_ti_latch() signature

The clock access functions exported by the clk header use the
struct clk_ti_reg parameter to get the address of the register. This
must also apply to clk_ti_latch(). Changes to TI's clk-mux and
clk-divider drivers prevented the patch from generating compile errors.

Signed-off-by: Dario Binacchi <dariobin@libero.it>

dm: fix build errors generated by last merges

Something was wrong in the merge process into the mainline.
Some added patches access driver structure fields and functions that
have been modified by previous patches.
The patch renames:
- dev_get_platdata to dev_get_plat
- dev_get_uclass_platdata to dev_get_uclass_plat
- ofdata_to_platdata to of_to_plat
- plat_data_alloc_size to plat_auto
- priv_auto_alloc_size to priv_auto
- video_uc_platdata to video_uc_plat

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: ti: add divider clock driver

The patch adds support for TI divider clock binding. The driver uses
routines provided by the common clock framework (ccf).

The code is based on the drivers/clk/ti/divider.c driver of the Linux
kernel version 5.9-rc7.
For DT binding details see:
- Documentation/devicetree/bindings/clock/ti/divider.txt

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: ti: change clk_ti_latch() signature

The clock access functions exported by the clk header use the
struct clk_ti_reg parameter to get the address of the register. This
must also apply to clk_ti_latch(). Changes to TI's clk-mux and
clk-divider drivers prevented the patch from generating compile errors.

Signed-off-by: Dario Binacchi <dariobin@libero.it>

dm: fix build errors generated by last merges

Something was wrong in the merge process into the mainline.
Some added patches access driver structure fields and functions that
have been modified by previous patches.
The patch renames:
- dev_get_platdata to dev_get_plat
- dev_get_uclass_platdata to dev_get_uclass_plat
- ofdata_to_platdata to of_to_plat
- plat_data_alloc_size to plat_auto
- priv_auto_alloc_size to priv_auto
- video_uc_platdata to video_uc_plat

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: ti: add divider clock driver

The patch adds support for TI divider clock binding. The driver uses
routines provided by the common clock framework (ccf).

The code is based on the drivers/clk/ti/divider.c driver of the Linux
kernel version 5.9-rc7.
For DT binding details see:
- Documentation/devicetree/bindings/clock/ti/divider.txt

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: ti: change clk_ti_latch() signature

The clock access functions exported by the clk header use the
struct clk_ti_reg parameter to get the address of the register. This
must also apply to clk_ti_latch(). Changes to TI's clk-mux and
clk-divider drivers prevented the patch from generating compile errors.

Signed-off-by: Dario Binacchi <dariobin@libero.it>

dm: fix build errors generated by last merges

Something was wrong in the merge process into the mainline.
Some added patches access driver structure fields and functions that
have been modified by previous patches.
The patch renames:
- dev_get_platdata to dev_get_plat
- dev_get_uclass_platdata to dev_get_uclass_plat
- ofdata_to_platdata to of_to_plat
- plat_data_alloc_size to plat_auto
- priv_auto_alloc_size to priv_auto
- video_uc_platdata to video_uc_plat

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: ti: add divider clock driver

The patch adds support for TI divider clock binding. The driver uses
routines provided by the common clock framework (ccf).

The code is based on the drivers/clk/ti/divider.c driver of the Linux
kernel version 5.9-rc7.
For DT binding details see:
- Documentation/devicetree/bindings/clock/ti/divider.txt

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: ti: change clk_ti_latch() signature

The clock access functions exported by the clk header use the
struct clk_ti_reg parameter to get the address of the register. This
must also apply to clk_ti_latch(). Changes to TI's clk-mux and
clk-divider drivers prevented the patch from generating compile errors.

Signed-off-by: Dario Binacchi <dariobin@libero.it>

dm: fix build errors generated by last merges

Something was wrong in the merge process into the mainline.
Some added patches access driver structure fields and functions that
have been modified by previous patches.
The patch renames:
- dev_get_platdata to dev_get_plat
- dev_get_uclass_platdata to dev_get_uclass_plat
- ofdata_to_platdata to of_to_plat
- plat_data_alloc_size to plat_auto
- priv_auto_alloc_size to priv_auto
- video_uc_platdata to video_uc_plat

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: ti: add divider clock driver

The patch adds support for TI divider clock binding. The driver uses
routines provided by the common clock framework (ccf).

The code is based on the drivers/clk/ti/divider.c driver of the Linux
kernel version 5.9-rc7.
For DT binding details see:
- Documentation/devicetree/bindings/clock/ti/divider.txt

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: ti: change clk_ti_latch() signature

The clock access functions exported by the clk header use the
struct clk_ti_reg parameter to get the address of the register. This
must also apply to clk_ti_latch(). Changes to TI's clk-mux and
clk-divider drivers prevented the patch from generating compile errors.

Signed-off-by: Dario Binacchi <dariobin@libero.it>

dm: fix build errors generated by last merges

Something was wrong in the merge process into the mainline.
Some added patches access driver structure fields and functions that
have been modified by previous patches.
The patch renames:
- dev_get_platdata to dev_get_plat
- dev_get_uclass_platdata to dev_get_uclass_plat
- ofdata_to_platdata to of_to_plat
- plat_data_alloc_size to plat_auto
- priv_auto_alloc_size to priv_auto
- video_uc_platdata to video_uc_plat

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: ti: add divider clock driver

The patch adds support for TI divider clock binding. The driver uses
routines provided by the common clock framework (ccf).

The code is based on the drivers/clk/ti/divider.c driver of the Linux
kernel version 5.9-rc7.
For DT binding details see:
- Documentation/devicetree/bindings/clock/ti/divider.txt

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: ti: change clk_ti_latch() signature

The clock access functions exported by the clk header use the
struct clk_ti_reg parameter to get the address of the register. This
must also apply to clk_ti_latch(). Changes to TI's clk-mux and
clk-divider drivers prevented the patch from generating compile errors.

Signed-off-by: Dario Binacchi <dariobin@libero.it>

dm: fix build errors generated by last merges

Something was wrong in the merge process into the mainline.
Some added patches access driver structure fields and functions that
have been modified by previous patches.
The patch renames:
- dev_get_platdata to dev_get_plat
- dev_get_uclass_platdata to dev_get_uclass_plat
- ofdata_to_platdata to of_to_plat
- plat_data_alloc_size to plat_auto
- priv_auto_alloc_size to priv_auto
- video_uc_platdata to video_uc_plat

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: ti: add divider clock driver

The patch adds support for TI divider clock binding. The driver uses
routines provided by the common clock framework (ccf).

The code is based on the drivers/clk/ti/divider.c driver of the Linux
kernel version 5.9-rc7.
For DT binding details see:
- Documentation/devicetree/bindings/clock/ti/divider.txt

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: ti: change clk_ti_latch() signature

The clock access functions exported by the clk header use the
struct clk_ti_reg parameter to get the address of the register. This
must also apply to clk_ti_latch(). Changes to TI's clk-mux and
clk-divider drivers prevented the patch from generating compile errors.

Signed-off-by: Dario Binacchi <dariobin@libero.it>

dm: fix build errors generated by last merges

Something was wrong in the merge process into the mainline.
Some added patches access driver structure fields and functions that
have been modified by previous patches.
The patch renames:
- dev_get_platdata to dev_get_plat
- dev_get_uclass_platdata to dev_get_uclass_plat
- ofdata_to_platdata to of_to_plat
- plat_data_alloc_size to plat_auto
- priv_auto_alloc_size to priv_auto
- video_uc_platdata to video_uc_plat

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: ti: add divider clock driver

The patch adds support for TI divider clock binding. The driver uses
routines provided by the common clock framework (ccf).

The code is based on the drivers/clk/ti/divider.c driver of the Linux
kernel version 5.9-rc7.
For DT binding details see:
- Documentation/devicetree/bindings/clock/ti/divider.txt

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: ti: change clk_ti_latch() signature

The clock access functions exported by the clk header use the
struct clk_ti_reg parameter to get the address of the register. This
must also apply to clk_ti_latch(). Changes to TI's clk-mux and
clk-divider drivers prevented the patch from generating compile errors.

Signed-off-by: Dario Binacchi <dariobin@libero.it>

dm: fix build errors generated by last merges

Something was wrong in the merge process into the mainline.
Some added patches access driver structure fields and functions that
have been modified by previous patches.
The patch renames:
- dev_get_platdata to dev_get_plat
- dev_get_uclass_platdata to dev_get_uclass_plat
- ofdata_to_platdata to of_to_plat
- plat_data_alloc_size to plat_auto
- priv_auto_alloc_size to priv_auto
- video_uc_platdata to video_uc_plat

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: ti: add divider clock driver

The patch adds support for TI divider clock binding. The driver uses
routines provided by the common clock framework (ccf).

The code is based on the drivers/clk/ti/divider.c driver of the Linux
kernel version 5.9-rc7.
For DT binding details see:
- Documentation/devicetree/bindings/clock/ti/divider.txt

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: ti: change clk_ti_latch() signature

The clock access functions exported by the clk header use the
struct clk_ti_reg parameter to get the address of the register. This
must also apply to clk_ti_latch(). Changes to TI's clk-mux and
clk-divider drivers prevented the patch from generating compile errors.

Signed-off-by: Dario Binacchi <dariobin@libero.it>

dm: fix build errors generated by last merges

Something was wrong in the merge process into the mainline.
Some added patches access driver structure fields and functions that
have been modified by previous patches.
The patch renames:
- dev_get_platdata to dev_get_plat
- dev_get_uclass_platdata to dev_get_uclass_plat
- ofdata_to_platdata to of_to_plat
- plat_data_alloc_size to plat_auto
- priv_auto_alloc_size to priv_auto
- video_uc_platdata to video_uc_plat

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: ti: add divider clock driver

The patch adds support for TI divider clock binding. The driver uses
routines provided by the common clock framework (ccf).

The code is based on the drivers/clk/ti/divider.c driver of the Linux
kernel version 5.9-rc7.
For DT binding details see:
- Documentation/devicetree/bindings/clock/ti/divider.txt

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: ti: change clk_ti_latch() signature

The clock access functions exported by the clk header use the
struct clk_ti_reg parameter to get the address of the register. This
must also apply to clk_ti_latch(). Changes to TI's clk-mux and
clk-divider drivers prevented the patch from generating compile errors.

Signed-off-by: Dario Binacchi <dariobin@libero.it>

dm: fix build errors generated by last merges

Something was wrong in the merge process into the mainline.
Some added patches access driver structure fields and functions that
have been modified by previous patches.
The patch renames:
- dev_get_platdata to dev_get_plat
- dev_get_uclass_platdata to dev_get_uclass_plat
- ofdata_to_platdata to of_to_plat
- plat_data_alloc_size to plat_auto
- priv_auto_alloc_size to priv_auto
- video_uc_platdata to video_uc_plat

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: ti: add divider clock driver

The patch adds support for TI divider clock binding. The driver uses
routines provided by the common clock framework (ccf).

The code is based on the drivers/clk/ti/divider.c driver of the Linux
kernel version 5.9-rc7.
For DT binding details see:
- Documentation/devicetree/bindings/clock/ti/divider.txt

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: ti: change clk_ti_latch() signature

The clock access functions exported by the clk header use the
struct clk_ti_reg parameter to get the address of the register. This
must also apply to clk_ti_latch(). Changes to TI's clk-mux and
clk-divider drivers prevented the patch from generating compile errors.

Signed-off-by: Dario Binacchi <dariobin@libero.it>

dm: fix build errors generated by last merges

Something was wrong in the merge process into the mainline.
Some added patches access driver structure fields and functions that
have been modified by previous patches.
The patch renames:
- dev_get_platdata to dev_get_plat
- dev_get_uclass_platdata to dev_get_uclass_plat
- ofdata_to_platdata to of_to_plat
- plat_data_alloc_size to plat_auto
- priv_auto_alloc_size to priv_auto
- video_uc_platdata to video_uc_plat

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: ti: add divider clock driver

The patch adds support for TI divider clock binding. The driver uses
routines provided by the common clock framework (ccf).

The code is based on the drivers/clk/ti/divider.c driver of the Linux
kernel version 5.9-rc7.
For DT binding details see:
- Documentation/devicetree/bindings/clock/ti/divider.txt

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: ti: change clk_ti_latch() signature

The clock access functions exported by the clk header use the
struct clk_ti_reg parameter to get the address of the register. This
must also apply to clk_ti_latch(). Changes to TI's clk-mux and
clk-divider drivers prevented the patch from generating compile errors.

Signed-off-by: Dario Binacchi <dariobin@libero.it>

dm: fix build errors generated by last merges

Something was wrong in the merge process into the mainline.
Some added patches access driver structure fields and functions that
have been modified by previous patches.
The patch renames:
- dev_get_platdata to dev_get_plat
- dev_get_uclass_platdata to dev_get_uclass_plat
- ofdata_to_platdata to of_to_plat
- plat_data_alloc_size to plat_auto
- priv_auto_alloc_size to priv_auto
- video_uc_platdata to video_uc_plat

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: ti: add divider clock driver

The patch adds support for TI divider clock binding. The driver uses
routines provided by the common clock framework (ccf).

The code is based on the drivers/clk/ti/divider.c driver of the Linux
kernel version 5.9-rc7.
For DT binding details see:
- Documentation/devicetree/bindings/clock/ti/divider.txt

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: ti: change clk_ti_latch() signature

The clock access functions exported by the clk header use the
struct clk_ti_reg parameter to get the address of the register. This
must also apply to clk_ti_latch(). Changes to TI's clk-mux and
clk-divider drivers prevented the patch from generating compile errors.

Signed-off-by: Dario Binacchi <dariobin@libero.it>

dm: fix build errors generated by last merges

Something was wrong in the merge process into the mainline.
Some added patches access driver structure fields and functions that
have been modified by previous patches.
The patch renames:
- dev_get_platdata to dev_get_plat
- dev_get_uclass_platdata to dev_get_uclass_plat
- ofdata_to_platdata to of_to_plat
- plat_data_alloc_size to plat_auto
- priv_auto_alloc_size to priv_auto
- video_uc_platdata to video_uc_plat

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: ti: add divider clock driver

The patch adds support for TI divider clock binding. The driver uses
routines provided by the common clock framework (ccf).

The code is based on the drivers/clk/ti/divider.c driver of the Linux
kernel version 5.9-rc7.
For DT binding details see:
- Documentation/devicetree/bindings/clock/ti/divider.txt

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: ti: change clk_ti_latch() signature

The clock access functions exported by the clk header use the
struct clk_ti_reg parameter to get the address of the register. This
must also apply to clk_ti_latch(). Changes to TI's clk-mux and
clk-divider drivers prevented the patch from generating compile errors.

Signed-off-by: Dario Binacchi <dariobin@libero.it>

dm: fix build errors generated by last merges

Something was wrong in the merge process into the mainline.
Some added patches access driver structure fields and functions that
have been modified by previous patches.
The patch renames:
- dev_get_platdata to dev_get_plat
- dev_get_uclass_platdata to dev_get_uclass_plat
- ofdata_to_platdata to of_to_plat
- plat_data_alloc_size to plat_auto
- priv_auto_alloc_size to priv_auto
- video_uc_platdata to video_uc_plat

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: ti: add divider clock driver

The patch adds support for TI divider clock binding. The driver uses
routines provided by the common clock framework (ccf).

The code is based on the drivers/clk/ti/divider.c driver of the Linux
kernel version 5.9-rc7.
For DT binding details see:
- Documentation/devicetree/bindings/clock/ti/divider.txt

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: ti: change clk_ti_latch() signature

The clock access functions exported by the clk header use the
struct clk_ti_reg parameter to get the address of the register. This
must also apply to clk_ti_latch(). Changes to TI's clk-mux and
clk-divider drivers prevented the patch from generating compile errors.

Signed-off-by: Dario Binacchi <dariobin@libero.it>

dm: fix build errors generated by last merges

Something was wrong in the merge process into the mainline.
Some added patches access driver structure fields and functions that
have been modified by previous patches.
The patch renames:
- dev_get_platdata to dev_get_plat
- dev_get_uclass_platdata to dev_get_uclass_plat
- ofdata_to_platdata to of_to_plat
- plat_data_alloc_size to plat_auto
- priv_auto_alloc_size to priv_auto
- video_uc_platdata to video_uc_plat

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: ti: add divider clock driver

The patch adds support for TI divider clock binding. The driver uses
routines provided by the common clock framework (ccf).

The code is based on the drivers/clk/ti/divider.c driver of the Linux
kernel version 5.9-rc7.
For DT binding details see:
- Documentation/devicetree/bindings/clock/ti/divider.txt

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: ti: change clk_ti_latch() signature

The clock access functions exported by the clk header use the
struct clk_ti_reg parameter to get the address of the register. This
must also apply to clk_ti_latch(). Changes to TI's clk-mux and
clk-divider drivers prevented the patch from generating compile errors.

Signed-off-by: Dario Binacchi <dariobin@libero.it>

dm: fix build errors generated by last merges

Something was wrong in the merge process into the mainline.
Some added patches access driver structure fields and functions that
have been modified by previous patches.
The patch renames:
- dev_get_platdata to dev_get_plat
- dev_get_uclass_platdata to dev_get_uclass_plat
- ofdata_to_platdata to of_to_plat
- plat_data_alloc_size to plat_auto
- priv_auto_alloc_size to priv_auto
- video_uc_platdata to video_uc_plat

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: ti: add divider clock driver

The patch adds support for TI divider clock binding. The driver uses
routines provided by the common clock framework (ccf).

The code is based on the drivers/clk/ti/divider.c driver of the Linux
kernel version 5.9-rc7.
For DT binding details see:
- Documentation/devicetree/bindings/clock/ti/divider.txt

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: ti: change clk_ti_latch() signature

The clock access functions exported by the clk header use the
struct clk_ti_reg parameter to get the address of the register. This
must also apply to clk_ti_latch(). Changes to TI's clk-mux and
clk-divider drivers prevented the patch from generating compile errors.

Signed-off-by: Dario Binacchi <dariobin@libero.it>

dm: fix build errors generated by last merges

Something was wrong in the merge process into the mainline.
Some added patches access driver structure fields and functions that
have been modified by previous patches.
The patch renames:
- dev_get_platdata to dev_get_plat
- dev_get_uclass_platdata to dev_get_uclass_plat
- ofdata_to_platdata to of_to_plat
- plat_data_alloc_size to plat_auto
- priv_auto_alloc_size to priv_auto
- video_uc_platdata to video_uc_plat

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: ti: add divider clock driver

The patch adds support for TI divider clock binding. The driver uses
routines provided by the common clock framework (ccf).

The code is based on the drivers/clk/ti/divider.c driver of the Linux
kernel version 5.9-rc7.
For DT binding details see:
- Documentation/devicetree/bindings/clock/ti/divider.txt

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: ti: change clk_ti_latch() signature

The clock access functions exported by the clk header use the
struct clk_ti_reg parameter to get the address of the register. This
must also apply to clk_ti_latch(). Changes to TI's clk-mux and
clk-divider drivers prevented the patch from generating compile errors.

Signed-off-by: Dario Binacchi <dariobin@libero.it>

dm: fix build errors generated by last merges

Something was wrong in the merge process into the mainline.
Some added patches access driver structure fields and functions that
have been modified by previous patches.
The patch renames:
- dev_get_platdata to dev_get_plat
- dev_get_uclass_platdata to dev_get_uclass_plat
- ofdata_to_platdata to of_to_plat
- plat_data_alloc_size to plat_auto
- priv_auto_alloc_size to priv_auto
- video_uc_platdata to video_uc_plat

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: ti: add divider clock driver

The patch adds support for TI divider clock binding. The driver uses
routines provided by the common clock framework (ccf).

The code is based on the drivers/clk/ti/divider.c driver of the Linux
kernel version 5.9-rc7.
For DT binding details see:
- Documentation/devicetree/bindings/clock/ti/divider.txt

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: ti: change clk_ti_latch() signature

The clock access functions exported by the clk header use the
struct clk_ti_reg parameter to get the address of the register. This
must also apply to clk_ti_latch(). Changes to TI's clk-mux and
clk-divider drivers prevented the patch from generating compile errors.

Signed-off-by: Dario Binacchi <dariobin@libero.it>

dm: fix build errors generated by last merges

Something was wrong in the merge process into the mainline.
Some added patches access driver structure fields and functions that
have been modified by previous patches.
The patch renames:
- dev_get_platdata to dev_get_plat
- dev_get_uclass_platdata to dev_get_uclass_plat
- ofdata_to_platdata to of_to_plat
- plat_data_alloc_size to plat_auto
- priv_auto_alloc_size to priv_auto
- video_uc_platdata to video_uc_plat

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: ti: add divider clock driver

The patch adds support for TI divider clock binding. The driver uses
routines provided by the common clock framework (ccf).

The code is based on the drivers/clk/ti/divider.c driver of the Linux
kernel version 5.9-rc7.
For DT binding details see:
- Documentation/devicetree/bindings/clock/ti/divider.txt

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: ti: change clk_ti_latch() signature

The clock access functions exported by the clk header use the
struct clk_ti_reg parameter to get the address of the register. This
must also apply to clk_ti_latch(). Changes to TI's clk-mux and
clk-divider drivers prevented the patch from generating compile errors.

Signed-off-by: Dario Binacchi <dariobin@libero.it>

dm: fix build errors generated by last merges

Something was wrong in the merge process into the mainline.
Some added patches access driver structure fields and functions that
have been modified by previous patches.
The patch renames:
- dev_get_platdata to dev_get_plat
- dev_get_uclass_platdata to dev_get_uclass_plat
- ofdata_to_platdata to of_to_plat
- plat_data_alloc_size to plat_auto
- priv_auto_alloc_size to priv_auto
- video_uc_platdata to video_uc_plat

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: ti: add divider clock driver

The patch adds support for TI divider clock binding. The driver uses
routines provided by the common clock framework (ccf).

The code is based on the drivers/clk/ti/divider.c driver of the Linux
kernel version 5.9-rc7.
For DT binding details see:
- Documentation/devicetree/bindings/clock/ti/divider.txt

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: ti: change clk_ti_latch() signature

The clock access functions exported by the clk header use the
struct clk_ti_reg parameter to get the address of the register. This
must also apply to clk_ti_latch(). Changes to TI's clk-mux and
clk-divider drivers prevented the patch from generating compile errors.

Signed-off-by: Dario Binacchi <dariobin@libero.it>

dm: fix build errors generated by last merges

Something was wrong in the merge process into the mainline.
Some added patches access driver structure fields and functions that
have been modified by previous patches.
The patch renames:
- dev_get_platdata to dev_get_plat
- dev_get_uclass_platdata to dev_get_uclass_plat
- ofdata_to_platdata to of_to_plat
- plat_data_alloc_size to plat_auto
- priv_auto_alloc_size to priv_auto
- video_uc_platdata to video_uc_plat

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: ti: add divider clock driver

The patch adds support for TI divider clock binding. The driver uses
routines provided by the common clock framework (ccf).

The code is based on the drivers/clk/ti/divider.c driver of the Linux
kernel version 5.9-rc7.
For DT binding details see:
- Documentation/devicetree/bindings/clock/ti/divider.txt

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: ti: change clk_ti_latch() signature

The clock access functions exported by the clk header use the
struct clk_ti_reg parameter to get the address of the register. This
must also apply to clk_ti_latch(). Changes to TI's clk-mux and
clk-divider drivers prevented the patch from generating compile errors.

Signed-off-by: Dario Binacchi <dariobin@libero.it>

dm: fix build errors generated by last merges

Something was wrong in the merge process into the mainline.
Some added patches access driver structure fields and functions that
have been modified by previous patches.
The patch renames:
- dev_get_platdata to dev_get_plat
- dev_get_uclass_platdata to dev_get_uclass_plat
- ofdata_to_platdata to of_to_plat
- plat_data_alloc_size to plat_auto
- priv_auto_alloc_size to priv_auto
- video_uc_platdata to video_uc_plat

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: ti: add divider clock driver

The patch adds support for TI divider clock binding. The driver uses
routines provided by the common clock framework (ccf).

The code is based on the drivers/clk/ti/divider.c driver of the Linux
kernel version 5.9-rc7.
For DT binding details see:
- Documentation/devicetree/bindings/clock/ti/divider.txt

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: ti: change clk_ti_latch() signature

The clock access functions exported by the clk header use the
struct clk_ti_reg parameter to get the address of the register. This
must also apply to clk_ti_latch(). Changes to TI's clk-mux and
clk-divider drivers prevented the patch from generating compile errors.

Signed-off-by: Dario Binacchi <dariobin@libero.it>

dm: fix build errors generated by last merges

Something was wrong in the merge process into the mainline.
Some added patches access driver structure fields and functions that
have been modified by previous patches.
The patch renames:
- dev_get_platdata to dev_get_plat
- dev_get_uclass_platdata to dev_get_uclass_plat
- ofdata_to_platdata to of_to_plat
- plat_data_alloc_size to plat_auto
- priv_auto_alloc_size to priv_auto
- video_uc_platdata to video_uc_plat

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: ti: add divider clock driver

The patch adds support for TI divider clock binding. The driver uses
routines provided by the common clock framework (ccf).

The code is based on the drivers/clk/ti/divider.c driver of the Linux
kernel version 5.9-rc7.
For DT binding details see:
- Documentation/devicetree/bindings/clock/ti/divider.txt

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: ti: change clk_ti_latch() signature

The clock access functions exported by the clk header use the
struct clk_ti_reg parameter to get the address of the register. This
must also apply to clk_ti_latch(). Changes to TI's clk-mux and
clk-divider drivers prevented the patch from generating compile errors.

Signed-off-by: Dario Binacchi <dariobin@libero.it>

dm: fix build errors generated by last merges

Something was wrong in the merge process into the mainline.
Some added patches access driver structure fields and functions that
have been modified by previous patches.
The patch renames:
- dev_get_platdata to dev_get_plat
- dev_get_uclass_platdata to dev_get_uclass_plat
- ofdata_to_platdata to of_to_plat
- plat_data_alloc_size to plat_auto
- priv_auto_alloc_size to priv_auto
- video_uc_platdata to video_uc_plat

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: ti: add divider clock driver

The patch adds support for TI divider clock binding. The driver uses
routines provided by the common clock framework (ccf).

The code is based on the drivers/clk/ti/divider.c driver of the Linux
kernel version 5.9-rc7.
For DT binding details see:
- Documentation/devicetree/bindings/clock/ti/divider.txt

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: ti: change clk_ti_latch() signature

The clock access functions exported by the clk header use the
struct clk_ti_reg parameter to get the address of the register. This
must also apply to clk_ti_latch(). Changes to TI's clk-mux and
clk-divider drivers prevented the patch from generating compile errors.

Signed-off-by: Dario Binacchi <dariobin@libero.it>

dm: fix build errors generated by last merges

Something was wrong in the merge process into the mainline.
Some added patches access driver structure fields and functions that
have been modified by previous patches.
The patch renames:
- dev_get_platdata to dev_get_plat
- dev_get_uclass_platdata to dev_get_uclass_plat
- ofdata_to_platdata to of_to_plat
- plat_data_alloc_size to plat_auto
- priv_auto_alloc_size to priv_auto
- video_uc_platdata to video_uc_plat

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: ti: add divider clock driver

The patch adds support for TI divider clock binding. The driver uses
routines provided by the common clock framework (ccf).

The code is based on the drivers/clk/ti/divider.c driver of the Linux
kernel version 5.9-rc7.
For DT binding details see:
- Documentation/devicetree/bindings/clock/ti/divider.txt

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: ti: change clk_ti_latch() signature

The clock access functions exported by the clk header use the
struct clk_ti_reg parameter to get the address of the register. This
must also apply to clk_ti_latch(). Changes to TI's clk-mux and
clk-divider drivers prevented the patch from generating compile errors.

Signed-off-by: Dario Binacchi <dariobin@libero.it>

dm: fix build errors generated by last merges

Something was wrong in the merge process into the mainline.
Some added patches access driver structure fields and functions that
have been modified by previous patches.
The patch renames:
- dev_get_platdata to dev_get_plat
- dev_get_uclass_platdata to dev_get_uclass_plat
- ofdata_to_platdata to of_to_plat
- plat_data_alloc_size to plat_auto
- priv_auto_alloc_size to priv_auto
- video_uc_platdata to video_uc_plat

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: ti: add divider clock driver

The patch adds support for TI divider clock binding. The driver uses
routines provided by the common clock framework (ccf).

The code is based on the drivers/clk/ti/divider.c driver of the Linux
kernel version 5.9-rc7.
For DT binding details see:
- Documentation/devicetree/bindings/clock/ti/divider.txt

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: ti: change clk_ti_latch() signature

The clock access functions exported by the clk header use the
struct clk_ti_reg parameter to get the address of the register. This
must also apply to clk_ti_latch(). Changes to TI's clk-mux and
clk-divider drivers prevented the patch from generating compile errors.

Signed-off-by: Dario Binacchi <dariobin@libero.it>

dm: fix build errors generated by last merges

Something was wrong in the merge process into the mainline.
Some added patches access driver structure fields and functions that
have been modified by previous patches.
The patch renames:
- dev_get_platdata to dev_get_plat
- dev_get_uclass_platdata to dev_get_uclass_plat
- ofdata_to_platdata to of_to_plat
- plat_data_alloc_size to plat_auto
- priv_auto_alloc_size to priv_auto
- video_uc_platdata to video_uc_plat

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: ti: add divider clock driver

The patch adds support for TI divider clock binding. The driver uses
routines provided by the common clock framework (ccf).

The code is based on the drivers/clk/ti/divider.c driver of the Linux
kernel version 5.9-rc7.
For DT binding details see:
- Documentation/devicetree/bindings/clock/ti/divider.txt

Signed-off-by: Dario Binacchi <dariobin@libero.it>