clk: add support for TI K3 SoC clocks

Add driver to support TI K3 generation SoC clocks. This driver registers
the clocks provided via platform data, and adds support for controlling
the clocks via DT handles.

Signed-off-by: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Tero Kristo <kristo@kernel.org>

clk: add support for TI K3 SoC PLL

Add support for TI K3 SoC PLLs. This clock type supports
enabling/disabling/setting and querying the clock rate for the PLL. The
euclidean library routine is used to calculate divider/multiplier rates
for the PLLs.

Signed-off-by: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Tero Kristo <kristo@kernel.org>

clk: move clk-ti-sci driver to 'ti' directory

The patch moves the clk-ti-sci.c file to the 'ti' directory along with
all the other TI's drivers, and renames it clk-sci.c.

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: ti: add support for clkctrl clocks

Until now the clkctrl clocks have been enabled/disabled through platform
routines. Thanks to this patch they can be enabled and configured directly
by the probed devices that need to use them.

For DT binding details see Linux doc:
- Documentation/devicetree/bindings/clock/ti-clkctrl.txt

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: ti: add gate clock driver

The patch adds support for TI gate clock binding. The code is based on
the drivers/clk/ti/gate.c driver of the Linux kernel version 5.9-rc7.
For DT binding details see:
- Documentation/devicetree/bindings/clock/ti/gate.txt

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: ti: add divider clock driver

The patch adds support for TI divider clock binding. The driver uses
routines provided by the common clock framework (ccf).

The code is based on the drivers/clk/ti/divider.c driver of the Linux
kernel version 5.9-rc7.
For DT binding details see:
- Documentation/devicetree/bindings/clock/ti/divider.txt

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: ti: am33xx: add DPLL clock drivers

The digital phase-locked loop (DPLL) provides all interface clocks and
functional clocks to the processor of the AM33xx device. The AM33xx
device integrates five different DPLLs:
* Core DPLL
* Per DPLL
* LCD DPLL
* DDR DPLL
* MPU DPLL

The patch adds support for the compatible strings:
* "ti,am3-dpll-core-clock"
* "ti,am3-dpll-no-gate-clock"
* "ti,am3-dpll-no-gate-j-type-clock"
* "ti,am3-dpll-x2-clock"

The code is loosely based on the drivers/clk/ti/dpll.c drivers of the
Linux kernel version 5.9-rc7.
For DT binding details see:
- Documentation/devicetree/bindings/clock/ti/dpll.txt

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: ti: add mux clock driver

The driver manages a register-mapped multiplexer with multiple input
clock signals or parents, one of which can be selected as output. It
uses routines provided by the common clock framework (ccf).

The code is based on the drivers/clk/ti/mux.c driver of the Linux
kernel version 5.9-rc7.
For DT binding details see:
- Documentation/devicetree/bindings/clock/ti/mux.txt

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: move clk-ti-sci driver to 'ti' directory

The patch moves the clk-ti-sci.c file to the 'ti' directory along with
all the other TI's drivers, and renames it clk-sci.c.

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: ti: add support for clkctrl clocks

Until now the clkctrl clocks have been enabled/disabled through platform
routines. Thanks to this patch they can be enabled and configured directly
by the probed devices that need to use them.

For DT binding details see Linux doc:
- Documentation/devicetree/bindings/clock/ti-clkctrl.txt

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: ti: add gate clock driver

The patch adds support for TI gate clock binding. The code is based on
the drivers/clk/ti/gate.c driver of the Linux kernel version 5.9-rc7.
For DT binding details see:
- Documentation/devicetree/bindings/clock/ti/gate.txt

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: ti: add divider clock driver

The patch adds support for TI divider clock binding. The driver uses
routines provided by the common clock framework (ccf).

The code is based on the drivers/clk/ti/divider.c driver of the Linux
kernel version 5.9-rc7.
For DT binding details see:
- Documentation/devicetree/bindings/clock/ti/divider.txt

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: ti: am33xx: add DPLL clock drivers

The digital phase-locked loop (DPLL) provides all interface clocks and
functional clocks to the processor of the AM33xx device. The AM33xx
device integrates five different DPLLs:
* Core DPLL
* Per DPLL
* LCD DPLL
* DDR DPLL
* MPU DPLL

The patch adds support for the compatible strings:
* "ti,am3-dpll-core-clock"
* "ti,am3-dpll-no-gate-clock"
* "ti,am3-dpll-no-gate-j-type-clock"
* "ti,am3-dpll-x2-clock"

The code is loosely based on the drivers/clk/ti/dpll.c drivers of the
Linux kernel version 5.9-rc7.
For DT binding details see:
- Documentation/devicetree/bindings/clock/ti/dpll.txt

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: ti: add mux clock driver

The driver manages a register-mapped multiplexer with multiple input
clock signals or parents, one of which can be selected as output. It
uses routines provided by the common clock framework (ccf).

The code is based on the drivers/clk/ti/mux.c driver of the Linux
kernel version 5.9-rc7.
For DT binding details see:
- Documentation/devicetree/bindings/clock/ti/mux.txt

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: move clk-ti-sci driver to 'ti' directory

The patch moves the clk-ti-sci.c file to the 'ti' directory along with
all the other TI's drivers, and renames it clk-sci.c.

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: ti: add support for clkctrl clocks

Until now the clkctrl clocks have been enabled/disabled through platform
routines. Thanks to this patch they can be enabled and configured directly
by the probed devices that need to use them.

For DT binding details see Linux doc:
- Documentation/devicetree/bindings/clock/ti-clkctrl.txt

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: ti: add gate clock driver

The patch adds support for TI gate clock binding. The code is based on
the drivers/clk/ti/gate.c driver of the Linux kernel version 5.9-rc7.
For DT binding details see:
- Documentation/devicetree/bindings/clock/ti/gate.txt

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: ti: add divider clock driver

The patch adds support for TI divider clock binding. The driver uses
routines provided by the common clock framework (ccf).

The code is based on the drivers/clk/ti/divider.c driver of the Linux
kernel version 5.9-rc7.
For DT binding details see:
- Documentation/devicetree/bindings/clock/ti/divider.txt

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: ti: am33xx: add DPLL clock drivers

The digital phase-locked loop (DPLL) provides all interface clocks and
functional clocks to the processor of the AM33xx device. The AM33xx
device integrates five different DPLLs:
* Core DPLL
* Per DPLL
* LCD DPLL
* DDR DPLL
* MPU DPLL

The patch adds support for the compatible strings:
* "ti,am3-dpll-core-clock"
* "ti,am3-dpll-no-gate-clock"
* "ti,am3-dpll-no-gate-j-type-clock"
* "ti,am3-dpll-x2-clock"

The code is loosely based on the drivers/clk/ti/dpll.c drivers of the
Linux kernel version 5.9-rc7.
For DT binding details see:
- Documentation/devicetree/bindings/clock/ti/dpll.txt

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: ti: add mux clock driver

The driver manages a register-mapped multiplexer with multiple input
clock signals or parents, one of which can be selected as output. It
uses routines provided by the common clock framework (ccf).

The code is based on the drivers/clk/ti/mux.c driver of the Linux
kernel version 5.9-rc7.
For DT binding details see:
- Documentation/devicetree/bindings/clock/ti/mux.txt

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: move clk-ti-sci driver to 'ti' directory

The patch moves the clk-ti-sci.c file to the 'ti' directory along with
all the other TI's drivers, and renames it clk-sci.c.

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: ti: add support for clkctrl clocks

Until now the clkctrl clocks have been enabled/disabled through platform
routines. Thanks to this patch they can be enabled and configured directly
by the probed devices that need to use them.

For DT binding details see Linux doc:
- Documentation/devicetree/bindings/clock/ti-clkctrl.txt

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: ti: add gate clock driver

The patch adds support for TI gate clock binding. The code is based on
the drivers/clk/ti/gate.c driver of the Linux kernel version 5.9-rc7.
For DT binding details see:
- Documentation/devicetree/bindings/clock/ti/gate.txt

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: ti: add divider clock driver

The patch adds support for TI divider clock binding. The driver uses
routines provided by the common clock framework (ccf).

The code is based on the drivers/clk/ti/divider.c driver of the Linux
kernel version 5.9-rc7.
For DT binding details see:
- Documentation/devicetree/bindings/clock/ti/divider.txt

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: ti: am33xx: add DPLL clock drivers

The digital phase-locked loop (DPLL) provides all interface clocks and
functional clocks to the processor of the AM33xx device. The AM33xx
device integrates five different DPLLs:
* Core DPLL
* Per DPLL
* LCD DPLL
* DDR DPLL
* MPU DPLL

The patch adds support for the compatible strings:
* "ti,am3-dpll-core-clock"
* "ti,am3-dpll-no-gate-clock"
* "ti,am3-dpll-no-gate-j-type-clock"
* "ti,am3-dpll-x2-clock"

The code is loosely based on the drivers/clk/ti/dpll.c drivers of the
Linux kernel version 5.9-rc7.
For DT binding details see:
- Documentation/devicetree/bindings/clock/ti/dpll.txt

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: ti: add mux clock driver

The driver manages a register-mapped multiplexer with multiple input
clock signals or parents, one of which can be selected as output. It
uses routines provided by the common clock framework (ccf).

The code is based on the drivers/clk/ti/mux.c driver of the Linux
kernel version 5.9-rc7.
For DT binding details see:
- Documentation/devicetree/bindings/clock/ti/mux.txt

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: move clk-ti-sci driver to 'ti' directory

The patch moves the clk-ti-sci.c file to the 'ti' directory along with
all the other TI's drivers, and renames it clk-sci.c.

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: ti: add support for clkctrl clocks

Until now the clkctrl clocks have been enabled/disabled through platform
routines. Thanks to this patch they can be enabled and configured directly
by the probed devices that need to use them.

For DT binding details see Linux doc:
- Documentation/devicetree/bindings/clock/ti-clkctrl.txt

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: ti: add gate clock driver

The patch adds support for TI gate clock binding. The code is based on
the drivers/clk/ti/gate.c driver of the Linux kernel version 5.9-rc7.
For DT binding details see:
- Documentation/devicetree/bindings/clock/ti/gate.txt

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: ti: add divider clock driver

The patch adds support for TI divider clock binding. The driver uses
routines provided by the common clock framework (ccf).

The code is based on the drivers/clk/ti/divider.c driver of the Linux
kernel version 5.9-rc7.
For DT binding details see:
- Documentation/devicetree/bindings/clock/ti/divider.txt

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: ti: am33xx: add DPLL clock drivers

The digital phase-locked loop (DPLL) provides all interface clocks and
functional clocks to the processor of the AM33xx device. The AM33xx
device integrates five different DPLLs:
* Core DPLL
* Per DPLL
* LCD DPLL
* DDR DPLL
* MPU DPLL

The patch adds support for the compatible strings:
* "ti,am3-dpll-core-clock"
* "ti,am3-dpll-no-gate-clock"
* "ti,am3-dpll-no-gate-j-type-clock"
* "ti,am3-dpll-x2-clock"

The code is loosely based on the drivers/clk/ti/dpll.c drivers of the
Linux kernel version 5.9-rc7.
For DT binding details see:
- Documentation/devicetree/bindings/clock/ti/dpll.txt

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: ti: add mux clock driver

The driver manages a register-mapped multiplexer with multiple input
clock signals or parents, one of which can be selected as output. It
uses routines provided by the common clock framework (ccf).

The code is based on the drivers/clk/ti/mux.c driver of the Linux
kernel version 5.9-rc7.
For DT binding details see:
- Documentation/devicetree/bindings/clock/ti/mux.txt

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: move clk-ti-sci driver to 'ti' directory

The patch moves the clk-ti-sci.c file to the 'ti' directory along with
all the other TI's drivers, and renames it clk-sci.c.

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: ti: add support for clkctrl clocks

Until now the clkctrl clocks have been enabled/disabled through platform
routines. Thanks to this patch they can be enabled and configured directly
by the probed devices that need to use them.

For DT binding details see Linux doc:
- Documentation/devicetree/bindings/clock/ti-clkctrl.txt

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: ti: add gate clock driver

The patch adds support for TI gate clock binding. The code is based on
the drivers/clk/ti/gate.c driver of the Linux kernel version 5.9-rc7.
For DT binding details see:
- Documentation/devicetree/bindings/clock/ti/gate.txt

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: ti: add divider clock driver

The patch adds support for TI divider clock binding. The driver uses
routines provided by the common clock framework (ccf).

The code is based on the drivers/clk/ti/divider.c driver of the Linux
kernel version 5.9-rc7.
For DT binding details see:
- Documentation/devicetree/bindings/clock/ti/divider.txt

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: ti: am33xx: add DPLL clock drivers

The digital phase-locked loop (DPLL) provides all interface clocks and
functional clocks to the processor of the AM33xx device. The AM33xx
device integrates five different DPLLs:
* Core DPLL
* Per DPLL
* LCD DPLL
* DDR DPLL
* MPU DPLL

The patch adds support for the compatible strings:
* "ti,am3-dpll-core-clock"
* "ti,am3-dpll-no-gate-clock"
* "ti,am3-dpll-no-gate-j-type-clock"
* "ti,am3-dpll-x2-clock"

The code is loosely based on the drivers/clk/ti/dpll.c drivers of the
Linux kernel version 5.9-rc7.
For DT binding details see:
- Documentation/devicetree/bindings/clock/ti/dpll.txt

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: ti: add mux clock driver

The driver manages a register-mapped multiplexer with multiple input
clock signals or parents, one of which can be selected as output. It
uses routines provided by the common clock framework (ccf).

The code is based on the drivers/clk/ti/mux.c driver of the Linux
kernel version 5.9-rc7.
For DT binding details see:
- Documentation/devicetree/bindings/clock/ti/mux.txt

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: move clk-ti-sci driver to 'ti' directory

The patch moves the clk-ti-sci.c file to the 'ti' directory along with
all the other TI's drivers, and renames it clk-sci.c.

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: ti: add support for clkctrl clocks

Until now the clkctrl clocks have been enabled/disabled through platform
routines. Thanks to this patch they can be enabled and configured directly
by the probed devices that need to use them.

For DT binding details see Linux doc:
- Documentation/devicetree/bindings/clock/ti-clkctrl.txt

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: ti: add gate clock driver

The patch adds support for TI gate clock binding. The code is based on
the drivers/clk/ti/gate.c driver of the Linux kernel version 5.9-rc7.
For DT binding details see:
- Documentation/devicetree/bindings/clock/ti/gate.txt

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: ti: add divider clock driver

The patch adds support for TI divider clock binding. The driver uses
routines provided by the common clock framework (ccf).

The code is based on the drivers/clk/ti/divider.c driver of the Linux
kernel version 5.9-rc7.
For DT binding details see:
- Documentation/devicetree/bindings/clock/ti/divider.txt

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: ti: am33xx: add DPLL clock drivers

The digital phase-locked loop (DPLL) provides all interface clocks and
functional clocks to the processor of the AM33xx device. The AM33xx
device integrates five different DPLLs:
* Core DPLL
* Per DPLL
* LCD DPLL
* DDR DPLL
* MPU DPLL

The patch adds support for the compatible strings:
* "ti,am3-dpll-core-clock"
* "ti,am3-dpll-no-gate-clock"
* "ti,am3-dpll-no-gate-j-type-clock"
* "ti,am3-dpll-x2-clock"

The code is loosely based on the drivers/clk/ti/dpll.c drivers of the
Linux kernel version 5.9-rc7.
For DT binding details see:
- Documentation/devicetree/bindings/clock/ti/dpll.txt

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: ti: add mux clock driver

The driver manages a register-mapped multiplexer with multiple input
clock signals or parents, one of which can be selected as output. It
uses routines provided by the common clock framework (ccf).

The code is based on the drivers/clk/ti/mux.c driver of the Linux
kernel version 5.9-rc7.
For DT binding details see:
- Documentation/devicetree/bindings/clock/ti/mux.txt

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: move clk-ti-sci driver to 'ti' directory

The patch moves the clk-ti-sci.c file to the 'ti' directory along with
all the other TI's drivers, and renames it clk-sci.c.

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: ti: add support for clkctrl clocks

Until now the clkctrl clocks have been enabled/disabled through platform
routines. Thanks to this patch they can be enabled and configured directly
by the probed devices that need to use them.

For DT binding details see Linux doc:
- Documentation/devicetree/bindings/clock/ti-clkctrl.txt

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: ti: add gate clock driver

The patch adds support for TI gate clock binding. The code is based on
the drivers/clk/ti/gate.c driver of the Linux kernel version 5.9-rc7.
For DT binding details see:
- Documentation/devicetree/bindings/clock/ti/gate.txt

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: ti: add divider clock driver

The patch adds support for TI divider clock binding. The driver uses
routines provided by the common clock framework (ccf).

The code is based on the drivers/clk/ti/divider.c driver of the Linux
kernel version 5.9-rc7.
For DT binding details see:
- Documentation/devicetree/bindings/clock/ti/divider.txt

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: ti: am33xx: add DPLL clock drivers

The digital phase-locked loop (DPLL) provides all interface clocks and
functional clocks to the processor of the AM33xx device. The AM33xx
device integrates five different DPLLs:
* Core DPLL
* Per DPLL
* LCD DPLL
* DDR DPLL
* MPU DPLL

The patch adds support for the compatible strings:
* "ti,am3-dpll-core-clock"
* "ti,am3-dpll-no-gate-clock"
* "ti,am3-dpll-no-gate-j-type-clock"
* "ti,am3-dpll-x2-clock"

The code is loosely based on the drivers/clk/ti/dpll.c drivers of the
Linux kernel version 5.9-rc7.
For DT binding details see:
- Documentation/devicetree/bindings/clock/ti/dpll.txt

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: ti: add mux clock driver

The driver manages a register-mapped multiplexer with multiple input
clock signals or parents, one of which can be selected as output. It
uses routines provided by the common clock framework (ccf).

The code is based on the drivers/clk/ti/mux.c driver of the Linux
kernel version 5.9-rc7.
For DT binding details see:
- Documentation/devicetree/bindings/clock/ti/mux.txt

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: move clk-ti-sci driver to 'ti' directory

The patch moves the clk-ti-sci.c file to the 'ti' directory along with
all the other TI's drivers, and renames it clk-sci.c.

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: ti: add support for clkctrl clocks

Until now the clkctrl clocks have been enabled/disabled through platform
routines. Thanks to this patch they can be enabled and configured directly
by the probed devices that need to use them.

For DT binding details see Linux doc:
- Documentation/devicetree/bindings/clock/ti-clkctrl.txt

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: ti: add gate clock driver

The patch adds support for TI gate clock binding. The code is based on
the drivers/clk/ti/gate.c driver of the Linux kernel version 5.9-rc7.
For DT binding details see:
- Documentation/devicetree/bindings/clock/ti/gate.txt

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: ti: add divider clock driver

The patch adds support for TI divider clock binding. The driver uses
routines provided by the common clock framework (ccf).

The code is based on the drivers/clk/ti/divider.c driver of the Linux
kernel version 5.9-rc7.
For DT binding details see:
- Documentation/devicetree/bindings/clock/ti/divider.txt

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: ti: am33xx: add DPLL clock drivers

The digital phase-locked loop (DPLL) provides all interface clocks and
functional clocks to the processor of the AM33xx device. The AM33xx
device integrates five different DPLLs:
* Core DPLL
* Per DPLL
* LCD DPLL
* DDR DPLL
* MPU DPLL

The patch adds support for the compatible strings:
* "ti,am3-dpll-core-clock"
* "ti,am3-dpll-no-gate-clock"
* "ti,am3-dpll-no-gate-j-type-clock"
* "ti,am3-dpll-x2-clock"

The code is loosely based on the drivers/clk/ti/dpll.c drivers of the
Linux kernel version 5.9-rc7.
For DT binding details see:
- Documentation/devicetree/bindings/clock/ti/dpll.txt

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: ti: add mux clock driver

The driver manages a register-mapped multiplexer with multiple input
clock signals or parents, one of which can be selected as output. It
uses routines provided by the common clock framework (ccf).

The code is based on the drivers/clk/ti/mux.c driver of the Linux
kernel version 5.9-rc7.
For DT binding details see:
- Documentation/devicetree/bindings/clock/ti/mux.txt

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: move clk-ti-sci driver to 'ti' directory

The patch moves the clk-ti-sci.c file to the 'ti' directory along with
all the other TI's drivers, and renames it clk-sci.c.

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: ti: add support for clkctrl clocks

Until now the clkctrl clocks have been enabled/disabled through platform
routines. Thanks to this patch they can be enabled and configured directly
by the probed devices that need to use them.

For DT binding details see Linux doc:
- Documentation/devicetree/bindings/clock/ti-clkctrl.txt

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: ti: add gate clock driver

The patch adds support for TI gate clock binding. The code is based on
the drivers/clk/ti/gate.c driver of the Linux kernel version 5.9-rc7.
For DT binding details see:
- Documentation/devicetree/bindings/clock/ti/gate.txt

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: ti: add divider clock driver

The patch adds support for TI divider clock binding. The driver uses
routines provided by the common clock framework (ccf).

The code is based on the drivers/clk/ti/divider.c driver of the Linux
kernel version 5.9-rc7.
For DT binding details see:
- Documentation/devicetree/bindings/clock/ti/divider.txt

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: ti: am33xx: add DPLL clock drivers

The digital phase-locked loop (DPLL) provides all interface clocks and
functional clocks to the processor of the AM33xx device. The AM33xx
device integrates five different DPLLs:
* Core DPLL
* Per DPLL
* LCD DPLL
* DDR DPLL
* MPU DPLL

The patch adds support for the compatible strings:
* "ti,am3-dpll-core-clock"
* "ti,am3-dpll-no-gate-clock"
* "ti,am3-dpll-no-gate-j-type-clock"
* "ti,am3-dpll-x2-clock"

The code is loosely based on the drivers/clk/ti/dpll.c drivers of the
Linux kernel version 5.9-rc7.
For DT binding details see:
- Documentation/devicetree/bindings/clock/ti/dpll.txt

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: ti: add mux clock driver

The driver manages a register-mapped multiplexer with multiple input
clock signals or parents, one of which can be selected as output. It
uses routines provided by the common clock framework (ccf).

The code is based on the drivers/clk/ti/mux.c driver of the Linux
kernel version 5.9-rc7.
For DT binding details see:
- Documentation/devicetree/bindings/clock/ti/mux.txt

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: move clk-ti-sci driver to 'ti' directory

The patch moves the clk-ti-sci.c file to the 'ti' directory along with
all the other TI's drivers, and renames it clk-sci.c.

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: ti: add support for clkctrl clocks

Until now the clkctrl clocks have been enabled/disabled through platform
routines. Thanks to this patch they can be enabled and configured directly
by the probed devices that need to use them.

For DT binding details see Linux doc:
- Documentation/devicetree/bindings/clock/ti-clkctrl.txt

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: ti: add gate clock driver

The patch adds support for TI gate clock binding. The code is based on
the drivers/clk/ti/gate.c driver of the Linux kernel version 5.9-rc7.
For DT binding details see:
- Documentation/devicetree/bindings/clock/ti/gate.txt

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: ti: add divider clock driver

The patch adds support for TI divider clock binding. The driver uses
routines provided by the common clock framework (ccf).

The code is based on the drivers/clk/ti/divider.c driver of the Linux
kernel version 5.9-rc7.
For DT binding details see:
- Documentation/devicetree/bindings/clock/ti/divider.txt

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: ti: am33xx: add DPLL clock drivers

The digital phase-locked loop (DPLL) provides all interface clocks and
functional clocks to the processor of the AM33xx device. The AM33xx
device integrates five different DPLLs:
* Core DPLL
* Per DPLL
* LCD DPLL
* DDR DPLL
* MPU DPLL

The patch adds support for the compatible strings:
* "ti,am3-dpll-core-clock"
* "ti,am3-dpll-no-gate-clock"
* "ti,am3-dpll-no-gate-j-type-clock"
* "ti,am3-dpll-x2-clock"

The code is loosely based on the drivers/clk/ti/dpll.c drivers of the
Linux kernel version 5.9-rc7.
For DT binding details see:
- Documentation/devicetree/bindings/clock/ti/dpll.txt

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: ti: add mux clock driver

The driver manages a register-mapped multiplexer with multiple input
clock signals or parents, one of which can be selected as output. It
uses routines provided by the common clock framework (ccf).

The code is based on the drivers/clk/ti/mux.c driver of the Linux
kernel version 5.9-rc7.
For DT binding details see:
- Documentation/devicetree/bindings/clock/ti/mux.txt

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: move clk-ti-sci driver to 'ti' directory

The patch moves the clk-ti-sci.c file to the 'ti' directory along with
all the other TI's drivers, and renames it clk-sci.c.

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: ti: add support for clkctrl clocks

Until now the clkctrl clocks have been enabled/disabled through platform
routines. Thanks to this patch they can be enabled and configured directly
by the probed devices that need to use them.

For DT binding details see Linux doc:
- Documentation/devicetree/bindings/clock/ti-clkctrl.txt

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: ti: add gate clock driver

The patch adds support for TI gate clock binding. The code is based on
the drivers/clk/ti/gate.c driver of the Linux kernel version 5.9-rc7.
For DT binding details see:
- Documentation/devicetree/bindings/clock/ti/gate.txt

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: ti: add divider clock driver

The patch adds support for TI divider clock binding. The driver uses
routines provided by the common clock framework (ccf).

The code is based on the drivers/clk/ti/divider.c driver of the Linux
kernel version 5.9-rc7.
For DT binding details see:
- Documentation/devicetree/bindings/clock/ti/divider.txt

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: ti: am33xx: add DPLL clock drivers

The digital phase-locked loop (DPLL) provides all interface clocks and
functional clocks to the processor of the AM33xx device. The AM33xx
device integrates five different DPLLs:
* Core DPLL
* Per DPLL
* LCD DPLL
* DDR DPLL
* MPU DPLL

The patch adds support for the compatible strings:
* "ti,am3-dpll-core-clock"
* "ti,am3-dpll-no-gate-clock"
* "ti,am3-dpll-no-gate-j-type-clock"
* "ti,am3-dpll-x2-clock"

The code is loosely based on the drivers/clk/ti/dpll.c drivers of the
Linux kernel version 5.9-rc7.
For DT binding details see:
- Documentation/devicetree/bindings/clock/ti/dpll.txt

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: ti: add mux clock driver

The driver manages a register-mapped multiplexer with multiple input
clock signals or parents, one of which can be selected as output. It
uses routines provided by the common clock framework (ccf).

The code is based on the drivers/clk/ti/mux.c driver of the Linux
kernel version 5.9-rc7.
For DT binding details see:
- Documentation/devicetree/bindings/clock/ti/mux.txt

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: move clk-ti-sci driver to 'ti' directory

The patch moves the clk-ti-sci.c file to the 'ti' directory along with
all the other TI's drivers, and renames it clk-sci.c.

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: ti: add support for clkctrl clocks

Until now the clkctrl clocks have been enabled/disabled through platform
routines. Thanks to this patch they can be enabled and configured directly
by the probed devices that need to use them.

For DT binding details see Linux doc:
- Documentation/devicetree/bindings/clock/ti-clkctrl.txt

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: ti: add gate clock driver

The patch adds support for TI gate clock binding. The code is based on
the drivers/clk/ti/gate.c driver of the Linux kernel version 5.9-rc7.
For DT binding details see:
- Documentation/devicetree/bindings/clock/ti/gate.txt

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: ti: add divider clock driver

The patch adds support for TI divider clock binding. The driver uses
routines provided by the common clock framework (ccf).

The code is based on the drivers/clk/ti/divider.c driver of the Linux
kernel version 5.9-rc7.
For DT binding details see:
- Documentation/devicetree/bindings/clock/ti/divider.txt

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: ti: am33xx: add DPLL clock drivers

The digital phase-locked loop (DPLL) provides all interface clocks and
functional clocks to the processor of the AM33xx device. The AM33xx
device integrates five different DPLLs:
* Core DPLL
* Per DPLL
* LCD DPLL
* DDR DPLL
* MPU DPLL

The patch adds support for the compatible strings:
* "ti,am3-dpll-core-clock"
* "ti,am3-dpll-no-gate-clock"
* "ti,am3-dpll-no-gate-j-type-clock"
* "ti,am3-dpll-x2-clock"

The code is loosely based on the drivers/clk/ti/dpll.c drivers of the
Linux kernel version 5.9-rc7.
For DT binding details see:
- Documentation/devicetree/bindings/clock/ti/dpll.txt

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: ti: add mux clock driver

The driver manages a register-mapped multiplexer with multiple input
clock signals or parents, one of which can be selected as output. It
uses routines provided by the common clock framework (ccf).

The code is based on the drivers/clk/ti/mux.c driver of the Linux
kernel version 5.9-rc7.
For DT binding details see:
- Documentation/devicetree/bindings/clock/ti/mux.txt

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: move clk-ti-sci driver to 'ti' directory

The patch moves the clk-ti-sci.c file to the 'ti' directory along with
all the other TI's drivers, and renames it clk-sci.c.

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: ti: add support for clkctrl clocks

Until now the clkctrl clocks have been enabled/disabled through platform
routines. Thanks to this patch they can be enabled and configured directly
by the probed devices that need to use them.

For DT binding details see Linux doc:
- Documentation/devicetree/bindings/clock/ti-clkctrl.txt

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: ti: add gate clock driver

The patch adds support for TI gate clock binding. The code is based on
the drivers/clk/ti/gate.c driver of the Linux kernel version 5.9-rc7.
For DT binding details see:
- Documentation/devicetree/bindings/clock/ti/gate.txt

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: ti: add divider clock driver

The patch adds support for TI divider clock binding. The driver uses
routines provided by the common clock framework (ccf).

The code is based on the drivers/clk/ti/divider.c driver of the Linux
kernel version 5.9-rc7.
For DT binding details see:
- Documentation/devicetree/bindings/clock/ti/divider.txt

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: ti: am33xx: add DPLL clock drivers

The digital phase-locked loop (DPLL) provides all interface clocks and
functional clocks to the processor of the AM33xx device. The AM33xx
device integrates five different DPLLs:
* Core DPLL
* Per DPLL
* LCD DPLL
* DDR DPLL
* MPU DPLL

The patch adds support for the compatible strings:
* "ti,am3-dpll-core-clock"
* "ti,am3-dpll-no-gate-clock"
* "ti,am3-dpll-no-gate-j-type-clock"
* "ti,am3-dpll-x2-clock"

The code is loosely based on the drivers/clk/ti/dpll.c drivers of the
Linux kernel version 5.9-rc7.
For DT binding details see:
- Documentation/devicetree/bindings/clock/ti/dpll.txt

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: ti: add mux clock driver

The driver manages a register-mapped multiplexer with multiple input
clock signals or parents, one of which can be selected as output. It
uses routines provided by the common clock framework (ccf).

The code is based on the drivers/clk/ti/mux.c driver of the Linux
kernel version 5.9-rc7.
For DT binding details see:
- Documentation/devicetree/bindings/clock/ti/mux.txt

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: move clk-ti-sci driver to 'ti' directory

The patch moves the clk-ti-sci.c file to the 'ti' directory along with
all the other TI's drivers, and renames it clk-sci.c.

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: ti: add support for clkctrl clocks

Until now the clkctrl clocks have been enabled/disabled through platform
routines. Thanks to this patch they can be enabled and configured directly
by the probed devices that need to use them.

For DT binding details see Linux doc:
- Documentation/devicetree/bindings/clock/ti-clkctrl.txt

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: ti: add gate clock driver

The patch adds support for TI gate clock binding. The code is based on
the drivers/clk/ti/gate.c driver of the Linux kernel version 5.9-rc7.
For DT binding details see:
- Documentation/devicetree/bindings/clock/ti/gate.txt

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: ti: add divider clock driver

The patch adds support for TI divider clock binding. The driver uses
routines provided by the common clock framework (ccf).

The code is based on the drivers/clk/ti/divider.c driver of the Linux
kernel version 5.9-rc7.
For DT binding details see:
- Documentation/devicetree/bindings/clock/ti/divider.txt

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: ti: am33xx: add DPLL clock drivers

The digital phase-locked loop (DPLL) provides all interface clocks and
functional clocks to the processor of the AM33xx device. The AM33xx
device integrates five different DPLLs:
* Core DPLL
* Per DPLL
* LCD DPLL
* DDR DPLL
* MPU DPLL

The patch adds support for the compatible strings:
* "ti,am3-dpll-core-clock"
* "ti,am3-dpll-no-gate-clock"
* "ti,am3-dpll-no-gate-j-type-clock"
* "ti,am3-dpll-x2-clock"

The code is loosely based on the drivers/clk/ti/dpll.c drivers of the
Linux kernel version 5.9-rc7.
For DT binding details see:
- Documentation/devicetree/bindings/clock/ti/dpll.txt

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: ti: add mux clock driver

The driver manages a register-mapped multiplexer with multiple input
clock signals or parents, one of which can be selected as output. It
uses routines provided by the common clock framework (ccf).

The code is based on the drivers/clk/ti/mux.c driver of the Linux
kernel version 5.9-rc7.
For DT binding details see:
- Documentation/devicetree/bindings/clock/ti/mux.txt

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: move clk-ti-sci driver to 'ti' directory

The patch moves the clk-ti-sci.c file to the 'ti' directory along with
all the other TI's drivers, and renames it clk-sci.c.

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: ti: add support for clkctrl clocks

Until now the clkctrl clocks have been enabled/disabled through platform
routines. Thanks to this patch they can be enabled and configured directly
by the probed devices that need to use them.

For DT binding details see Linux doc:
- Documentation/devicetree/bindings/clock/ti-clkctrl.txt

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: ti: add gate clock driver

The patch adds support for TI gate clock binding. The code is based on
the drivers/clk/ti/gate.c driver of the Linux kernel version 5.9-rc7.
For DT binding details see:
- Documentation/devicetree/bindings/clock/ti/gate.txt

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: ti: add divider clock driver

The patch adds support for TI divider clock binding. The driver uses
routines provided by the common clock framework (ccf).

The code is based on the drivers/clk/ti/divider.c driver of the Linux
kernel version 5.9-rc7.
For DT binding details see:
- Documentation/devicetree/bindings/clock/ti/divider.txt

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: ti: am33xx: add DPLL clock drivers

The digital phase-locked loop (DPLL) provides all interface clocks and
functional clocks to the processor of the AM33xx device. The AM33xx
device integrates five different DPLLs:
* Core DPLL
* Per DPLL
* LCD DPLL
* DDR DPLL
* MPU DPLL

The patch adds support for the compatible strings:
* "ti,am3-dpll-core-clock"
* "ti,am3-dpll-no-gate-clock"
* "ti,am3-dpll-no-gate-j-type-clock"
* "ti,am3-dpll-x2-clock"

The code is loosely based on the drivers/clk/ti/dpll.c drivers of the
Linux kernel version 5.9-rc7.
For DT binding details see:
- Documentation/devicetree/bindings/clock/ti/dpll.txt

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: ti: add mux clock driver

The driver manages a register-mapped multiplexer with multiple input
clock signals or parents, one of which can be selected as output. It
uses routines provided by the common clock framework (ccf).

The code is based on the drivers/clk/ti/mux.c driver of the Linux
kernel version 5.9-rc7.
For DT binding details see:
- Documentation/devicetree/bindings/clock/ti/mux.txt

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: move clk-ti-sci driver to 'ti' directory

The patch moves the clk-ti-sci.c file to the 'ti' directory along with
all the other TI's drivers, and renames it clk-sci.c.

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: ti: add support for clkctrl clocks

Until now the clkctrl clocks have been enabled/disabled through platform
routines. Thanks to this patch they can be enabled and configured directly
by the probed devices that need to use them.

For DT binding details see Linux doc:
- Documentation/devicetree/bindings/clock/ti-clkctrl.txt

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: ti: add gate clock driver

The patch adds support for TI gate clock binding. The code is based on
the drivers/clk/ti/gate.c driver of the Linux kernel version 5.9-rc7.
For DT binding details see:
- Documentation/devicetree/bindings/clock/ti/gate.txt

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: ti: add divider clock driver

The patch adds support for TI divider clock binding. The driver uses
routines provided by the common clock framework (ccf).

The code is based on the drivers/clk/ti/divider.c driver of the Linux
kernel version 5.9-rc7.
For DT binding details see:
- Documentation/devicetree/bindings/clock/ti/divider.txt

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: ti: am33xx: add DPLL clock drivers

The digital phase-locked loop (DPLL) provides all interface clocks and
functional clocks to the processor of the AM33xx device. The AM33xx
device integrates five different DPLLs:
* Core DPLL
* Per DPLL
* LCD DPLL
* DDR DPLL
* MPU DPLL

The patch adds support for the compatible strings:
* "ti,am3-dpll-core-clock"
* "ti,am3-dpll-no-gate-clock"
* "ti,am3-dpll-no-gate-j-type-clock"
* "ti,am3-dpll-x2-clock"

The code is loosely based on the drivers/clk/ti/dpll.c drivers of the
Linux kernel version 5.9-rc7.
For DT binding details see:
- Documentation/devicetree/bindings/clock/ti/dpll.txt

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: ti: add mux clock driver

The driver manages a register-mapped multiplexer with multiple input
clock signals or parents, one of which can be selected as output. It
uses routines provided by the common clock framework (ccf).

The code is based on the drivers/clk/ti/mux.c driver of the Linux
kernel version 5.9-rc7.
For DT binding details see:
- Documentation/devicetree/bindings/clock/ti/mux.txt

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: move clk-ti-sci driver to 'ti' directory

The patch moves the clk-ti-sci.c file to the 'ti' directory along with
all the other TI's drivers, and renames it clk-sci.c.

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: ti: add support for clkctrl clocks

Until now the clkctrl clocks have been enabled/disabled through platform
routines. Thanks to this patch they can be enabled and configured directly
by the probed devices that need to use them.

For DT binding details see Linux doc:
- Documentation/devicetree/bindings/clock/ti-clkctrl.txt

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: ti: add gate clock driver

The patch adds support for TI gate clock binding. The code is based on
the drivers/clk/ti/gate.c driver of the Linux kernel version 5.9-rc7.
For DT binding details see:
- Documentation/devicetree/bindings/clock/ti/gate.txt

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: ti: add divider clock driver

The patch adds support for TI divider clock binding. The driver uses
routines provided by the common clock framework (ccf).

The code is based on the drivers/clk/ti/divider.c driver of the Linux
kernel version 5.9-rc7.
For DT binding details see:
- Documentation/devicetree/bindings/clock/ti/divider.txt

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: ti: am33xx: add DPLL clock drivers

The digital phase-locked loop (DPLL) provides all interface clocks and
functional clocks to the processor of the AM33xx device. The AM33xx
device integrates five different DPLLs:
* Core DPLL
* Per DPLL
* LCD DPLL
* DDR DPLL
* MPU DPLL

The patch adds support for the compatible strings:
* "ti,am3-dpll-core-clock"
* "ti,am3-dpll-no-gate-clock"
* "ti,am3-dpll-no-gate-j-type-clock"
* "ti,am3-dpll-x2-clock"

The code is loosely based on the drivers/clk/ti/dpll.c drivers of the
Linux kernel version 5.9-rc7.
For DT binding details see:
- Documentation/devicetree/bindings/clock/ti/dpll.txt

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: ti: add mux clock driver

The driver manages a register-mapped multiplexer with multiple input
clock signals or parents, one of which can be selected as output. It
uses routines provided by the common clock framework (ccf).

The code is based on the drivers/clk/ti/mux.c driver of the Linux
kernel version 5.9-rc7.
For DT binding details see:
- Documentation/devicetree/bindings/clock/ti/mux.txt

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: move clk-ti-sci driver to 'ti' directory

The patch moves the clk-ti-sci.c file to the 'ti' directory along with
all the other TI's drivers, and renames it clk-sci.c.

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: ti: add support for clkctrl clocks

Until now the clkctrl clocks have been enabled/disabled through platform
routines. Thanks to this patch they can be enabled and configured directly
by the probed devices that need to use them.

For DT binding details see Linux doc:
- Documentation/devicetree/bindings/clock/ti-clkctrl.txt

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: ti: add gate clock driver

The patch adds support for TI gate clock binding. The code is based on
the drivers/clk/ti/gate.c driver of the Linux kernel version 5.9-rc7.
For DT binding details see:
- Documentation/devicetree/bindings/clock/ti/gate.txt

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: ti: add divider clock driver

The patch adds support for TI divider clock binding. The driver uses
routines provided by the common clock framework (ccf).

The code is based on the drivers/clk/ti/divider.c driver of the Linux
kernel version 5.9-rc7.
For DT binding details see:
- Documentation/devicetree/bindings/clock/ti/divider.txt

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: ti: am33xx: add DPLL clock drivers

The digital phase-locked loop (DPLL) provides all interface clocks and
functional clocks to the processor of the AM33xx device. The AM33xx
device integrates five different DPLLs:
* Core DPLL
* Per DPLL
* LCD DPLL
* DDR DPLL
* MPU DPLL

The patch adds support for the compatible strings:
* "ti,am3-dpll-core-clock"
* "ti,am3-dpll-no-gate-clock"
* "ti,am3-dpll-no-gate-j-type-clock"
* "ti,am3-dpll-x2-clock"

The code is loosely based on the drivers/clk/ti/dpll.c drivers of the
Linux kernel version 5.9-rc7.
For DT binding details see:
- Documentation/devicetree/bindings/clock/ti/dpll.txt

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: ti: add mux clock driver

The driver manages a register-mapped multiplexer with multiple input
clock signals or parents, one of which can be selected as output. It
uses routines provided by the common clock framework (ccf).

The code is based on the drivers/clk/ti/mux.c driver of the Linux
kernel version 5.9-rc7.
For DT binding details see:
- Documentation/devicetree/bindings/clock/ti/mux.txt

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: move clk-ti-sci driver to 'ti' directory

The patch moves the clk-ti-sci.c file to the 'ti' directory along with
all the other TI's drivers, and renames it clk-sci.c.

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: ti: add support for clkctrl clocks

Until now the clkctrl clocks have been enabled/disabled through platform
routines. Thanks to this patch they can be enabled and configured directly
by the probed devices that need to use them.

For DT binding details see Linux doc:
- Documentation/devicetree/bindings/clock/ti-clkctrl.txt

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: ti: add gate clock driver

The patch adds support for TI gate clock binding. The code is based on
the drivers/clk/ti/gate.c driver of the Linux kernel version 5.9-rc7.
For DT binding details see:
- Documentation/devicetree/bindings/clock/ti/gate.txt

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: ti: add divider clock driver

The patch adds support for TI divider clock binding. The driver uses
routines provided by the common clock framework (ccf).

The code is based on the drivers/clk/ti/divider.c driver of the Linux
kernel version 5.9-rc7.
For DT binding details see:
- Documentation/devicetree/bindings/clock/ti/divider.txt

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: ti: am33xx: add DPLL clock drivers

The digital phase-locked loop (DPLL) provides all interface clocks and
functional clocks to the processor of the AM33xx device. The AM33xx
device integrates five different DPLLs:
* Core DPLL
* Per DPLL
* LCD DPLL
* DDR DPLL
* MPU DPLL

The patch adds support for the compatible strings:
* "ti,am3-dpll-core-clock"
* "ti,am3-dpll-no-gate-clock"
* "ti,am3-dpll-no-gate-j-type-clock"
* "ti,am3-dpll-x2-clock"

The code is loosely based on the drivers/clk/ti/dpll.c drivers of the
Linux kernel version 5.9-rc7.
For DT binding details see:
- Documentation/devicetree/bindings/clock/ti/dpll.txt

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: ti: add mux clock driver

The driver manages a register-mapped multiplexer with multiple input
clock signals or parents, one of which can be selected as output. It
uses routines provided by the common clock framework (ccf).

The code is based on the drivers/clk/ti/mux.c driver of the Linux
kernel version 5.9-rc7.
For DT binding details see:
- Documentation/devicetree/bindings/clock/ti/mux.txt

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: move clk-ti-sci driver to 'ti' directory

The patch moves the clk-ti-sci.c file to the 'ti' directory along with
all the other TI's drivers, and renames it clk-sci.c.

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: ti: add support for clkctrl clocks

Until now the clkctrl clocks have been enabled/disabled through platform
routines. Thanks to this patch they can be enabled and configured directly
by the probed devices that need to use them.

For DT binding details see Linux doc:
- Documentation/devicetree/bindings/clock/ti-clkctrl.txt

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: ti: add gate clock driver

The patch adds support for TI gate clock binding. The code is based on
the drivers/clk/ti/gate.c driver of the Linux kernel version 5.9-rc7.
For DT binding details see:
- Documentation/devicetree/bindings/clock/ti/gate.txt

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: ti: add divider clock driver

The patch adds support for TI divider clock binding. The driver uses
routines provided by the common clock framework (ccf).

The code is based on the drivers/clk/ti/divider.c driver of the Linux
kernel version 5.9-rc7.
For DT binding details see:
- Documentation/devicetree/bindings/clock/ti/divider.txt

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: ti: am33xx: add DPLL clock drivers

The digital phase-locked loop (DPLL) provides all interface clocks and
functional clocks to the processor of the AM33xx device. The AM33xx
device integrates five different DPLLs:
* Core DPLL
* Per DPLL
* LCD DPLL
* DDR DPLL
* MPU DPLL

The patch adds support for the compatible strings:
* "ti,am3-dpll-core-clock"
* "ti,am3-dpll-no-gate-clock"
* "ti,am3-dpll-no-gate-j-type-clock"
* "ti,am3-dpll-x2-clock"

The code is loosely based on the drivers/clk/ti/dpll.c drivers of the
Linux kernel version 5.9-rc7.
For DT binding details see:
- Documentation/devicetree/bindings/clock/ti/dpll.txt

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: ti: add mux clock driver

The driver manages a register-mapped multiplexer with multiple input
clock signals or parents, one of which can be selected as output. It
uses routines provided by the common clock framework (ccf).

The code is based on the drivers/clk/ti/mux.c driver of the Linux
kernel version 5.9-rc7.
For DT binding details see:
- Documentation/devicetree/bindings/clock/ti/mux.txt

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: move clk-ti-sci driver to 'ti' directory

The patch moves the clk-ti-sci.c file to the 'ti' directory along with
all the other TI's drivers, and renames it clk-sci.c.

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: ti: add support for clkctrl clocks

Until now the clkctrl clocks have been enabled/disabled through platform
routines. Thanks to this patch they can be enabled and configured directly
by the probed devices that need to use them.

For DT binding details see Linux doc:
- Documentation/devicetree/bindings/clock/ti-clkctrl.txt

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: ti: add gate clock driver

The patch adds support for TI gate clock binding. The code is based on
the drivers/clk/ti/gate.c driver of the Linux kernel version 5.9-rc7.
For DT binding details see:
- Documentation/devicetree/bindings/clock/ti/gate.txt

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: ti: add divider clock driver

The patch adds support for TI divider clock binding. The driver uses
routines provided by the common clock framework (ccf).

The code is based on the drivers/clk/ti/divider.c driver of the Linux
kernel version 5.9-rc7.
For DT binding details see:
- Documentation/devicetree/bindings/clock/ti/divider.txt

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: ti: am33xx: add DPLL clock drivers

The digital phase-locked loop (DPLL) provides all interface clocks and
functional clocks to the processor of the AM33xx device. The AM33xx
device integrates five different DPLLs:
* Core DPLL
* Per DPLL
* LCD DPLL
* DDR DPLL
* MPU DPLL

The patch adds support for the compatible strings:
* "ti,am3-dpll-core-clock"
* "ti,am3-dpll-no-gate-clock"
* "ti,am3-dpll-no-gate-j-type-clock"
* "ti,am3-dpll-x2-clock"

The code is loosely based on the drivers/clk/ti/dpll.c drivers of the
Linux kernel version 5.9-rc7.
For DT binding details see:
- Documentation/devicetree/bindings/clock/ti/dpll.txt

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: ti: add mux clock driver

The driver manages a register-mapped multiplexer with multiple input
clock signals or parents, one of which can be selected as output. It
uses routines provided by the common clock framework (ccf).

The code is based on the drivers/clk/ti/mux.c driver of the Linux
kernel version 5.9-rc7.
For DT binding details see:
- Documentation/devicetree/bindings/clock/ti/mux.txt

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: move clk-ti-sci driver to 'ti' directory

The patch moves the clk-ti-sci.c file to the 'ti' directory along with
all the other TI's drivers, and renames it clk-sci.c.

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: ti: add support for clkctrl clocks

Until now the clkctrl clocks have been enabled/disabled through platform
routines. Thanks to this patch they can be enabled and configured directly
by the probed devices that need to use them.

For DT binding details see Linux doc:
- Documentation/devicetree/bindings/clock/ti-clkctrl.txt

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: ti: add gate clock driver

The patch adds support for TI gate clock binding. The code is based on
the drivers/clk/ti/gate.c driver of the Linux kernel version 5.9-rc7.
For DT binding details see:
- Documentation/devicetree/bindings/clock/ti/gate.txt

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: ti: add divider clock driver

The patch adds support for TI divider clock binding. The driver uses
routines provided by the common clock framework (ccf).

The code is based on the drivers/clk/ti/divider.c driver of the Linux
kernel version 5.9-rc7.
For DT binding details see:
- Documentation/devicetree/bindings/clock/ti/divider.txt

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: ti: am33xx: add DPLL clock drivers

The digital phase-locked loop (DPLL) provides all interface clocks and
functional clocks to the processor of the AM33xx device. The AM33xx
device integrates five different DPLLs:
* Core DPLL
* Per DPLL
* LCD DPLL
* DDR DPLL
* MPU DPLL

The patch adds support for the compatible strings:
* "ti,am3-dpll-core-clock"
* "ti,am3-dpll-no-gate-clock"
* "ti,am3-dpll-no-gate-j-type-clock"
* "ti,am3-dpll-x2-clock"

The code is loosely based on the drivers/clk/ti/dpll.c drivers of the
Linux kernel version 5.9-rc7.
For DT binding details see:
- Documentation/devicetree/bindings/clock/ti/dpll.txt

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: ti: add mux clock driver

The driver manages a register-mapped multiplexer with multiple input
clock signals or parents, one of which can be selected as output. It
uses routines provided by the common clock framework (ccf).

The code is based on the drivers/clk/ti/mux.c driver of the Linux
kernel version 5.9-rc7.
For DT binding details see:
- Documentation/devicetree/bindings/clock/ti/mux.txt

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: move clk-ti-sci driver to 'ti' directory

The patch moves the clk-ti-sci.c file to the 'ti' directory along with
all the other TI's drivers, and renames it clk-sci.c.

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: ti: add support for clkctrl clocks

Until now the clkctrl clocks have been enabled/disabled through platform
routines. Thanks to this patch they can be enabled and configured directly
by the probed devices that need to use them.

For DT binding details see Linux doc:
- Documentation/devicetree/bindings/clock/ti-clkctrl.txt

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: ti: add gate clock driver

The patch adds support for TI gate clock binding. The code is based on
the drivers/clk/ti/gate.c driver of the Linux kernel version 5.9-rc7.
For DT binding details see:
- Documentation/devicetree/bindings/clock/ti/gate.txt

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: ti: add divider clock driver

The patch adds support for TI divider clock binding. The driver uses
routines provided by the common clock framework (ccf).

The code is based on the drivers/clk/ti/divider.c driver of the Linux
kernel version 5.9-rc7.
For DT binding details see:
- Documentation/devicetree/bindings/clock/ti/divider.txt

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: ti: am33xx: add DPLL clock drivers

The digital phase-locked loop (DPLL) provides all interface clocks and
functional clocks to the processor of the AM33xx device. The AM33xx
device integrates five different DPLLs:
* Core DPLL
* Per DPLL
* LCD DPLL
* DDR DPLL
* MPU DPLL

The patch adds support for the compatible strings:
* "ti,am3-dpll-core-clock"
* "ti,am3-dpll-no-gate-clock"
* "ti,am3-dpll-no-gate-j-type-clock"
* "ti,am3-dpll-x2-clock"

The code is loosely based on the drivers/clk/ti/dpll.c drivers of the
Linux kernel version 5.9-rc7.
For DT binding details see:
- Documentation/devicetree/bindings/clock/ti/dpll.txt

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: ti: add mux clock driver

The driver manages a register-mapped multiplexer with multiple input
clock signals or parents, one of which can be selected as output. It
uses routines provided by the common clock framework (ccf).

The code is based on the drivers/clk/ti/mux.c driver of the Linux
kernel version 5.9-rc7.
For DT binding details see:
- Documentation/devicetree/bindings/clock/ti/mux.txt

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: move clk-ti-sci driver to 'ti' directory

The patch moves the clk-ti-sci.c file to the 'ti' directory along with
all the other TI's drivers, and renames it clk-sci.c.

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: ti: add support for clkctrl clocks

Until now the clkctrl clocks have been enabled/disabled through platform
routines. Thanks to this patch they can be enabled and configured directly
by the probed devices that need to use them.

For DT binding details see Linux doc:
- Documentation/devicetree/bindings/clock/ti-clkctrl.txt

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: ti: add gate clock driver

The patch adds support for TI gate clock binding. The code is based on
the drivers/clk/ti/gate.c driver of the Linux kernel version 5.9-rc7.
For DT binding details see:
- Documentation/devicetree/bindings/clock/ti/gate.txt

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: ti: add divider clock driver

The patch adds support for TI divider clock binding. The driver uses
routines provided by the common clock framework (ccf).

The code is based on the drivers/clk/ti/divider.c driver of the Linux
kernel version 5.9-rc7.
For DT binding details see:
- Documentation/devicetree/bindings/clock/ti/divider.txt

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: ti: am33xx: add DPLL clock drivers

The digital phase-locked loop (DPLL) provides all interface clocks and
functional clocks to the processor of the AM33xx device. The AM33xx
device integrates five different DPLLs:
* Core DPLL
* Per DPLL
* LCD DPLL
* DDR DPLL
* MPU DPLL

The patch adds support for the compatible strings:
* "ti,am3-dpll-core-clock"
* "ti,am3-dpll-no-gate-clock"
* "ti,am3-dpll-no-gate-j-type-clock"
* "ti,am3-dpll-x2-clock"

The code is loosely based on the drivers/clk/ti/dpll.c drivers of the
Linux kernel version 5.9-rc7.
For DT binding details see:
- Documentation/devicetree/bindings/clock/ti/dpll.txt

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: ti: add mux clock driver

The driver manages a register-mapped multiplexer with multiple input
clock signals or parents, one of which can be selected as output. It
uses routines provided by the common clock framework (ccf).

The code is based on the drivers/clk/ti/mux.c driver of the Linux
kernel version 5.9-rc7.
For DT binding details see:
- Documentation/devicetree/bindings/clock/ti/mux.txt

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: move clk-ti-sci driver to 'ti' directory

The patch moves the clk-ti-sci.c file to the 'ti' directory along with
all the other TI's drivers, and renames it clk-sci.c.

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: ti: add support for clkctrl clocks

Until now the clkctrl clocks have been enabled/disabled through platform
routines. Thanks to this patch they can be enabled and configured directly
by the probed devices that need to use them.

For DT binding details see Linux doc:
- Documentation/devicetree/bindings/clock/ti-clkctrl.txt

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: ti: add gate clock driver

The patch adds support for TI gate clock binding. The code is based on
the drivers/clk/ti/gate.c driver of the Linux kernel version 5.9-rc7.
For DT binding details see:
- Documentation/devicetree/bindings/clock/ti/gate.txt

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: ti: add divider clock driver

The patch adds support for TI divider clock binding. The driver uses
routines provided by the common clock framework (ccf).

The code is based on the drivers/clk/ti/divider.c driver of the Linux
kernel version 5.9-rc7.
For DT binding details see:
- Documentation/devicetree/bindings/clock/ti/divider.txt

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: ti: am33xx: add DPLL clock drivers

The digital phase-locked loop (DPLL) provides all interface clocks and
functional clocks to the processor of the AM33xx device. The AM33xx
device integrates five different DPLLs:
* Core DPLL
* Per DPLL
* LCD DPLL
* DDR DPLL
* MPU DPLL

The patch adds support for the compatible strings:
* "ti,am3-dpll-core-clock"
* "ti,am3-dpll-no-gate-clock"
* "ti,am3-dpll-no-gate-j-type-clock"
* "ti,am3-dpll-x2-clock"

The code is loosely based on the drivers/clk/ti/dpll.c drivers of the
Linux kernel version 5.9-rc7.
For DT binding details see:
- Documentation/devicetree/bindings/clock/ti/dpll.txt

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: ti: add mux clock driver

The driver manages a register-mapped multiplexer with multiple input
clock signals or parents, one of which can be selected as output. It
uses routines provided by the common clock framework (ccf).

The code is based on the drivers/clk/ti/mux.c driver of the Linux
kernel version 5.9-rc7.
For DT binding details see:
- Documentation/devicetree/bindings/clock/ti/mux.txt

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: move clk-ti-sci driver to 'ti' directory

The patch moves the clk-ti-sci.c file to the 'ti' directory along with
all the other TI's drivers, and renames it clk-sci.c.

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: ti: add support for clkctrl clocks

Until now the clkctrl clocks have been enabled/disabled through platform
routines. Thanks to this patch they can be enabled and configured directly
by the probed devices that need to use them.

For DT binding details see Linux doc:
- Documentation/devicetree/bindings/clock/ti-clkctrl.txt

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: ti: add gate clock driver

The patch adds support for TI gate clock binding. The code is based on
the drivers/clk/ti/gate.c driver of the Linux kernel version 5.9-rc7.
For DT binding details see:
- Documentation/devicetree/bindings/clock/ti/gate.txt

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: ti: add divider clock driver

The patch adds support for TI divider clock binding. The driver uses
routines provided by the common clock framework (ccf).

The code is based on the drivers/clk/ti/divider.c driver of the Linux
kernel version 5.9-rc7.
For DT binding details see:
- Documentation/devicetree/bindings/clock/ti/divider.txt

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: ti: am33xx: add DPLL clock drivers

The digital phase-locked loop (DPLL) provides all interface clocks and
functional clocks to the processor of the AM33xx device. The AM33xx
device integrates five different DPLLs:
* Core DPLL
* Per DPLL
* LCD DPLL
* DDR DPLL
* MPU DPLL

The patch adds support for the compatible strings:
* "ti,am3-dpll-core-clock"
* "ti,am3-dpll-no-gate-clock"
* "ti,am3-dpll-no-gate-j-type-clock"
* "ti,am3-dpll-x2-clock"

The code is loosely based on the drivers/clk/ti/dpll.c drivers of the
Linux kernel version 5.9-rc7.
For DT binding details see:
- Documentation/devicetree/bindings/clock/ti/dpll.txt

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: ti: add mux clock driver

The driver manages a register-mapped multiplexer with multiple input
clock signals or parents, one of which can be selected as output. It
uses routines provided by the common clock framework (ccf).

The code is based on the drivers/clk/ti/mux.c driver of the Linux
kernel version 5.9-rc7.
For DT binding details see:
- Documentation/devicetree/bindings/clock/ti/mux.txt

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: move clk-ti-sci driver to 'ti' directory

The patch moves the clk-ti-sci.c file to the 'ti' directory along with
all the other TI's drivers, and renames it clk-sci.c.

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: ti: add support for clkctrl clocks

Until now the clkctrl clocks have been enabled/disabled through platform
routines. Thanks to this patch they can be enabled and configured directly
by the probed devices that need to use them.

For DT binding details see Linux doc:
- Documentation/devicetree/bindings/clock/ti-clkctrl.txt

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: ti: add gate clock driver

The patch adds support for TI gate clock binding. The code is based on
the drivers/clk/ti/gate.c driver of the Linux kernel version 5.9-rc7.
For DT binding details see:
- Documentation/devicetree/bindings/clock/ti/gate.txt

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: ti: add divider clock driver

The patch adds support for TI divider clock binding. The driver uses
routines provided by the common clock framework (ccf).

The code is based on the drivers/clk/ti/divider.c driver of the Linux
kernel version 5.9-rc7.
For DT binding details see:
- Documentation/devicetree/bindings/clock/ti/divider.txt

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: ti: am33xx: add DPLL clock drivers

The digital phase-locked loop (DPLL) provides all interface clocks and
functional clocks to the processor of the AM33xx device. The AM33xx
device integrates five different DPLLs:
* Core DPLL
* Per DPLL
* LCD DPLL
* DDR DPLL
* MPU DPLL

The patch adds support for the compatible strings:
* "ti,am3-dpll-core-clock"
* "ti,am3-dpll-no-gate-clock"
* "ti,am3-dpll-no-gate-j-type-clock"
* "ti,am3-dpll-x2-clock"

The code is loosely based on the drivers/clk/ti/dpll.c drivers of the
Linux kernel version 5.9-rc7.
For DT binding details see:
- Documentation/devicetree/bindings/clock/ti/dpll.txt

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: ti: add mux clock driver

The driver manages a register-mapped multiplexer with multiple input
clock signals or parents, one of which can be selected as output. It
uses routines provided by the common clock framework (ccf).

The code is based on the drivers/clk/ti/mux.c driver of the Linux
kernel version 5.9-rc7.
For DT binding details see:
- Documentation/devicetree/bindings/clock/ti/mux.txt

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: move clk-ti-sci driver to 'ti' directory

The patch moves the clk-ti-sci.c file to the 'ti' directory along with
all the other TI's drivers, and renames it clk-sci.c.

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: ti: add support for clkctrl clocks

Until now the clkctrl clocks have been enabled/disabled through platform
routines. Thanks to this patch they can be enabled and configured directly
by the probed devices that need to use them.

For DT binding details see Linux doc:
- Documentation/devicetree/bindings/clock/ti-clkctrl.txt

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: ti: add gate clock driver

The patch adds support for TI gate clock binding. The code is based on
the drivers/clk/ti/gate.c driver of the Linux kernel version 5.9-rc7.
For DT binding details see:
- Documentation/devicetree/bindings/clock/ti/gate.txt

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: ti: add divider clock driver

The patch adds support for TI divider clock binding. The driver uses
routines provided by the common clock framework (ccf).

The code is based on the drivers/clk/ti/divider.c driver of the Linux
kernel version 5.9-rc7.
For DT binding details see:
- Documentation/devicetree/bindings/clock/ti/divider.txt

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: ti: am33xx: add DPLL clock drivers

The digital phase-locked loop (DPLL) provides all interface clocks and
functional clocks to the processor of the AM33xx device. The AM33xx
device integrates five different DPLLs:
* Core DPLL
* Per DPLL
* LCD DPLL
* DDR DPLL
* MPU DPLL

The patch adds support for the compatible strings:
* "ti,am3-dpll-core-clock"
* "ti,am3-dpll-no-gate-clock"
* "ti,am3-dpll-no-gate-j-type-clock"
* "ti,am3-dpll-x2-clock"

The code is loosely based on the drivers/clk/ti/dpll.c drivers of the
Linux kernel version 5.9-rc7.
For DT binding details see:
- Documentation/devicetree/bindings/clock/ti/dpll.txt

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: ti: add mux clock driver

The driver manages a register-mapped multiplexer with multiple input
clock signals or parents, one of which can be selected as output. It
uses routines provided by the common clock framework (ccf).

The code is based on the drivers/clk/ti/mux.c driver of the Linux
kernel version 5.9-rc7.
For DT binding details see:
- Documentation/devicetree/bindings/clock/ti/mux.txt

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: move clk-ti-sci driver to 'ti' directory

The patch moves the clk-ti-sci.c file to the 'ti' directory along with
all the other TI's drivers, and renames it clk-sci.c.

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: ti: add support for clkctrl clocks

Until now the clkctrl clocks have been enabled/disabled through platform
routines. Thanks to this patch they can be enabled and configured directly
by the probed devices that need to use them.

For DT binding details see Linux doc:
- Documentation/devicetree/bindings/clock/ti-clkctrl.txt

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: ti: add gate clock driver

The patch adds support for TI gate clock binding. The code is based on
the drivers/clk/ti/gate.c driver of the Linux kernel version 5.9-rc7.
For DT binding details see:
- Documentation/devicetree/bindings/clock/ti/gate.txt

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: ti: add divider clock driver

The patch adds support for TI divider clock binding. The driver uses
routines provided by the common clock framework (ccf).

The code is based on the drivers/clk/ti/divider.c driver of the Linux
kernel version 5.9-rc7.
For DT binding details see:
- Documentation/devicetree/bindings/clock/ti/divider.txt

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: ti: am33xx: add DPLL clock drivers

The digital phase-locked loop (DPLL) provides all interface clocks and
functional clocks to the processor of the AM33xx device. The AM33xx
device integrates five different DPLLs:
* Core DPLL
* Per DPLL
* LCD DPLL
* DDR DPLL
* MPU DPLL

The patch adds support for the compatible strings:
* "ti,am3-dpll-core-clock"
* "ti,am3-dpll-no-gate-clock"
* "ti,am3-dpll-no-gate-j-type-clock"
* "ti,am3-dpll-x2-clock"

The code is loosely based on the drivers/clk/ti/dpll.c drivers of the
Linux kernel version 5.9-rc7.
For DT binding details see:
- Documentation/devicetree/bindings/clock/ti/dpll.txt

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: ti: add mux clock driver

The driver manages a register-mapped multiplexer with multiple input
clock signals or parents, one of which can be selected as output. It
uses routines provided by the common clock framework (ccf).

The code is based on the drivers/clk/ti/mux.c driver of the Linux
kernel version 5.9-rc7.
For DT binding details see:
- Documentation/devicetree/bindings/clock/ti/mux.txt

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: move clk-ti-sci driver to 'ti' directory

The patch moves the clk-ti-sci.c file to the 'ti' directory along with
all the other TI's drivers, and renames it clk-sci.c.

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: ti: add support for clkctrl clocks

Until now the clkctrl clocks have been enabled/disabled through platform
routines. Thanks to this patch they can be enabled and configured directly
by the probed devices that need to use them.

For DT binding details see Linux doc:
- Documentation/devicetree/bindings/clock/ti-clkctrl.txt

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: ti: add gate clock driver

The patch adds support for TI gate clock binding. The code is based on
the drivers/clk/ti/gate.c driver of the Linux kernel version 5.9-rc7.
For DT binding details see:
- Documentation/devicetree/bindings/clock/ti/gate.txt

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: ti: add divider clock driver

The patch adds support for TI divider clock binding. The driver uses
routines provided by the common clock framework (ccf).

The code is based on the drivers/clk/ti/divider.c driver of the Linux
kernel version 5.9-rc7.
For DT binding details see:
- Documentation/devicetree/bindings/clock/ti/divider.txt

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: ti: am33xx: add DPLL clock drivers

The digital phase-locked loop (DPLL) provides all interface clocks and
functional clocks to the processor of the AM33xx device. The AM33xx
device integrates five different DPLLs:
* Core DPLL
* Per DPLL
* LCD DPLL
* DDR DPLL
* MPU DPLL

The patch adds support for the compatible strings:
* "ti,am3-dpll-core-clock"
* "ti,am3-dpll-no-gate-clock"
* "ti,am3-dpll-no-gate-j-type-clock"
* "ti,am3-dpll-x2-clock"

The code is loosely based on the drivers/clk/ti/dpll.c drivers of the
Linux kernel version 5.9-rc7.
For DT binding details see:
- Documentation/devicetree/bindings/clock/ti/dpll.txt

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: ti: add mux clock driver

The driver manages a register-mapped multiplexer with multiple input
clock signals or parents, one of which can be selected as output. It
uses routines provided by the common clock framework (ccf).

The code is based on the drivers/clk/ti/mux.c driver of the Linux
kernel version 5.9-rc7.
For DT binding details see:
- Documentation/devicetree/bindings/clock/ti/mux.txt

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: move clk-ti-sci driver to 'ti' directory

The patch moves the clk-ti-sci.c file to the 'ti' directory along with
all the other TI's drivers, and renames it clk-sci.c.

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: ti: add support for clkctrl clocks

Until now the clkctrl clocks have been enabled/disabled through platform
routines. Thanks to this patch they can be enabled and configured directly
by the probed devices that need to use them.

For DT binding details see Linux doc:
- Documentation/devicetree/bindings/clock/ti-clkctrl.txt

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: ti: add gate clock driver

The patch adds support for TI gate clock binding. The code is based on
the drivers/clk/ti/gate.c driver of the Linux kernel version 5.9-rc7.
For DT binding details see:
- Documentation/devicetree/bindings/clock/ti/gate.txt

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: ti: add divider clock driver

The patch adds support for TI divider clock binding. The driver uses
routines provided by the common clock framework (ccf).

The code is based on the drivers/clk/ti/divider.c driver of the Linux
kernel version 5.9-rc7.
For DT binding details see:
- Documentation/devicetree/bindings/clock/ti/divider.txt

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: ti: am33xx: add DPLL clock drivers

The digital phase-locked loop (DPLL) provides all interface clocks and
functional clocks to the processor of the AM33xx device. The AM33xx
device integrates five different DPLLs:
* Core DPLL
* Per DPLL
* LCD DPLL
* DDR DPLL
* MPU DPLL

The patch adds support for the compatible strings:
* "ti,am3-dpll-core-clock"
* "ti,am3-dpll-no-gate-clock"
* "ti,am3-dpll-no-gate-j-type-clock"
* "ti,am3-dpll-x2-clock"

The code is loosely based on the drivers/clk/ti/dpll.c drivers of the
Linux kernel version 5.9-rc7.
For DT binding details see:
- Documentation/devicetree/bindings/clock/ti/dpll.txt

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: ti: add mux clock driver

The driver manages a register-mapped multiplexer with multiple input
clock signals or parents, one of which can be selected as output. It
uses routines provided by the common clock framework (ccf).

The code is based on the drivers/clk/ti/mux.c driver of the Linux
kernel version 5.9-rc7.
For DT binding details see:
- Documentation/devicetree/bindings/clock/ti/mux.txt

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: move clk-ti-sci driver to 'ti' directory

The patch moves the clk-ti-sci.c file to the 'ti' directory along with
all the other TI's drivers, and renames it clk-sci.c.

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: ti: add support for clkctrl clocks

Until now the clkctrl clocks have been enabled/disabled through platform
routines. Thanks to this patch they can be enabled and configured directly
by the probed devices that need to use them.

For DT binding details see Linux doc:
- Documentation/devicetree/bindings/clock/ti-clkctrl.txt

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: ti: add gate clock driver

The patch adds support for TI gate clock binding. The code is based on
the drivers/clk/ti/gate.c driver of the Linux kernel version 5.9-rc7.
For DT binding details see:
- Documentation/devicetree/bindings/clock/ti/gate.txt

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: ti: add divider clock driver

The patch adds support for TI divider clock binding. The driver uses
routines provided by the common clock framework (ccf).

The code is based on the drivers/clk/ti/divider.c driver of the Linux
kernel version 5.9-rc7.
For DT binding details see:
- Documentation/devicetree/bindings/clock/ti/divider.txt

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: ti: am33xx: add DPLL clock drivers

The digital phase-locked loop (DPLL) provides all interface clocks and
functional clocks to the processor of the AM33xx device. The AM33xx
device integrates five different DPLLs:
* Core DPLL
* Per DPLL
* LCD DPLL
* DDR DPLL
* MPU DPLL

The patch adds support for the compatible strings:
* "ti,am3-dpll-core-clock"
* "ti,am3-dpll-no-gate-clock"
* "ti,am3-dpll-no-gate-j-type-clock"
* "ti,am3-dpll-x2-clock"

The code is loosely based on the drivers/clk/ti/dpll.c drivers of the
Linux kernel version 5.9-rc7.
For DT binding details see:
- Documentation/devicetree/bindings/clock/ti/dpll.txt

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: ti: add mux clock driver

The driver manages a register-mapped multiplexer with multiple input
clock signals or parents, one of which can be selected as output. It
uses routines provided by the common clock framework (ccf).

The code is based on the drivers/clk/ti/mux.c driver of the Linux
kernel version 5.9-rc7.
For DT binding details see:
- Documentation/devicetree/bindings/clock/ti/mux.txt

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: move clk-ti-sci driver to 'ti' directory

The patch moves the clk-ti-sci.c file to the 'ti' directory along with
all the other TI's drivers, and renames it clk-sci.c.

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: ti: add support for clkctrl clocks

Until now the clkctrl clocks have been enabled/disabled through platform
routines. Thanks to this patch they can be enabled and configured directly
by the probed devices that need to use them.

For DT binding details see Linux doc:
- Documentation/devicetree/bindings/clock/ti-clkctrl.txt

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: ti: add gate clock driver

The patch adds support for TI gate clock binding. The code is based on
the drivers/clk/ti/gate.c driver of the Linux kernel version 5.9-rc7.
For DT binding details see:
- Documentation/devicetree/bindings/clock/ti/gate.txt

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: ti: add divider clock driver

The patch adds support for TI divider clock binding. The driver uses
routines provided by the common clock framework (ccf).

The code is based on the drivers/clk/ti/divider.c driver of the Linux
kernel version 5.9-rc7.
For DT binding details see:
- Documentation/devicetree/bindings/clock/ti/divider.txt

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: ti: am33xx: add DPLL clock drivers

The digital phase-locked loop (DPLL) provides all interface clocks and
functional clocks to the processor of the AM33xx device. The AM33xx
device integrates five different DPLLs:
* Core DPLL
* Per DPLL
* LCD DPLL
* DDR DPLL
* MPU DPLL

The patch adds support for the compatible strings:
* "ti,am3-dpll-core-clock"
* "ti,am3-dpll-no-gate-clock"
* "ti,am3-dpll-no-gate-j-type-clock"
* "ti,am3-dpll-x2-clock"

The code is loosely based on the drivers/clk/ti/dpll.c drivers of the
Linux kernel version 5.9-rc7.
For DT binding details see:
- Documentation/devicetree/bindings/clock/ti/dpll.txt

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: ti: add mux clock driver

The driver manages a register-mapped multiplexer with multiple input
clock signals or parents, one of which can be selected as output. It
uses routines provided by the common clock framework (ccf).

The code is based on the drivers/clk/ti/mux.c driver of the Linux
kernel version 5.9-rc7.
For DT binding details see:
- Documentation/devicetree/bindings/clock/ti/mux.txt

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: move clk-ti-sci driver to 'ti' directory

The patch moves the clk-ti-sci.c file to the 'ti' directory along with
all the other TI's drivers, and renames it clk-sci.c.

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: ti: add support for clkctrl clocks

Until now the clkctrl clocks have been enabled/disabled through platform
routines. Thanks to this patch they can be enabled and configured directly
by the probed devices that need to use them.

For DT binding details see Linux doc:
- Documentation/devicetree/bindings/clock/ti-clkctrl.txt

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: ti: add gate clock driver

The patch adds support for TI gate clock binding. The code is based on
the drivers/clk/ti/gate.c driver of the Linux kernel version 5.9-rc7.
For DT binding details see:
- Documentation/devicetree/bindings/clock/ti/gate.txt

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: ti: add divider clock driver

The patch adds support for TI divider clock binding. The driver uses
routines provided by the common clock framework (ccf).

The code is based on the drivers/clk/ti/divider.c driver of the Linux
kernel version 5.9-rc7.
For DT binding details see:
- Documentation/devicetree/bindings/clock/ti/divider.txt

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: ti: am33xx: add DPLL clock drivers

The digital phase-locked loop (DPLL) provides all interface clocks and
functional clocks to the processor of the AM33xx device. The AM33xx
device integrates five different DPLLs:
* Core DPLL
* Per DPLL
* LCD DPLL
* DDR DPLL
* MPU DPLL

The patch adds support for the compatible strings:
* "ti,am3-dpll-core-clock"
* "ti,am3-dpll-no-gate-clock"
* "ti,am3-dpll-no-gate-j-type-clock"
* "ti,am3-dpll-x2-clock"

The code is loosely based on the drivers/clk/ti/dpll.c drivers of the
Linux kernel version 5.9-rc7.
For DT binding details see:
- Documentation/devicetree/bindings/clock/ti/dpll.txt

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: ti: add mux clock driver

The driver manages a register-mapped multiplexer with multiple input
clock signals or parents, one of which can be selected as output. It
uses routines provided by the common clock framework (ccf).

The code is based on the drivers/clk/ti/mux.c driver of the Linux
kernel version 5.9-rc7.
For DT binding details see:
- Documentation/devicetree/bindings/clock/ti/mux.txt

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: move clk-ti-sci driver to 'ti' directory

The patch moves the clk-ti-sci.c file to the 'ti' directory along with
all the other TI's drivers, and renames it clk-sci.c.

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: ti: add support for clkctrl clocks

Until now the clkctrl clocks have been enabled/disabled through platform
routines. Thanks to this patch they can be enabled and configured directly
by the probed devices that need to use them.

For DT binding details see Linux doc:
- Documentation/devicetree/bindings/clock/ti-clkctrl.txt

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: ti: add gate clock driver

The patch adds support for TI gate clock binding. The code is based on
the drivers/clk/ti/gate.c driver of the Linux kernel version 5.9-rc7.
For DT binding details see:
- Documentation/devicetree/bindings/clock/ti/gate.txt

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: ti: add divider clock driver

The patch adds support for TI divider clock binding. The driver uses
routines provided by the common clock framework (ccf).

The code is based on the drivers/clk/ti/divider.c driver of the Linux
kernel version 5.9-rc7.
For DT binding details see:
- Documentation/devicetree/bindings/clock/ti/divider.txt

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: ti: am33xx: add DPLL clock drivers

The digital phase-locked loop (DPLL) provides all interface clocks and
functional clocks to the processor of the AM33xx device. The AM33xx
device integrates five different DPLLs:
* Core DPLL
* Per DPLL
* LCD DPLL
* DDR DPLL
* MPU DPLL

The patch adds support for the compatible strings:
* "ti,am3-dpll-core-clock"
* "ti,am3-dpll-no-gate-clock"
* "ti,am3-dpll-no-gate-j-type-clock"
* "ti,am3-dpll-x2-clock"

The code is loosely based on the drivers/clk/ti/dpll.c drivers of the
Linux kernel version 5.9-rc7.
For DT binding details see:
- Documentation/devicetree/bindings/clock/ti/dpll.txt

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: ti: add mux clock driver

The driver manages a register-mapped multiplexer with multiple input
clock signals or parents, one of which can be selected as output. It
uses routines provided by the common clock framework (ccf).

The code is based on the drivers/clk/ti/mux.c driver of the Linux
kernel version 5.9-rc7.
For DT binding details see:
- Documentation/devicetree/bindings/clock/ti/mux.txt

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: move clk-ti-sci driver to 'ti' directory

The patch moves the clk-ti-sci.c file to the 'ti' directory along with
all the other TI's drivers, and renames it clk-sci.c.

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: ti: add support for clkctrl clocks

Until now the clkctrl clocks have been enabled/disabled through platform
routines. Thanks to this patch they can be enabled and configured directly
by the probed devices that need to use them.

For DT binding details see Linux doc:
- Documentation/devicetree/bindings/clock/ti-clkctrl.txt

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: ti: add gate clock driver

The patch adds support for TI gate clock binding. The code is based on
the drivers/clk/ti/gate.c driver of the Linux kernel version 5.9-rc7.
For DT binding details see:
- Documentation/devicetree/bindings/clock/ti/gate.txt

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: ti: add divider clock driver

The patch adds support for TI divider clock binding. The driver uses
routines provided by the common clock framework (ccf).

The code is based on the drivers/clk/ti/divider.c driver of the Linux
kernel version 5.9-rc7.
For DT binding details see:
- Documentation/devicetree/bindings/clock/ti/divider.txt

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: ti: am33xx: add DPLL clock drivers

The digital phase-locked loop (DPLL) provides all interface clocks and
functional clocks to the processor of the AM33xx device. The AM33xx
device integrates five different DPLLs:
* Core DPLL
* Per DPLL
* LCD DPLL
* DDR DPLL
* MPU DPLL

The patch adds support for the compatible strings:
* "ti,am3-dpll-core-clock"
* "ti,am3-dpll-no-gate-clock"
* "ti,am3-dpll-no-gate-j-type-clock"
* "ti,am3-dpll-x2-clock"

The code is loosely based on the drivers/clk/ti/dpll.c drivers of the
Linux kernel version 5.9-rc7.
For DT binding details see:
- Documentation/devicetree/bindings/clock/ti/dpll.txt

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: ti: add mux clock driver

The driver manages a register-mapped multiplexer with multiple input
clock signals or parents, one of which can be selected as output. It
uses routines provided by the common clock framework (ccf).

The code is based on the drivers/clk/ti/mux.c driver of the Linux
kernel version 5.9-rc7.
For DT binding details see:
- Documentation/devicetree/bindings/clock/ti/mux.txt

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: move clk-ti-sci driver to 'ti' directory

The patch moves the clk-ti-sci.c file to the 'ti' directory along with
all the other TI's drivers, and renames it clk-sci.c.

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: ti: add support for clkctrl clocks

Until now the clkctrl clocks have been enabled/disabled through platform
routines. Thanks to this patch they can be enabled and configured directly
by the probed devices that need to use them.

For DT binding details see Linux doc:
- Documentation/devicetree/bindings/clock/ti-clkctrl.txt

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: ti: add gate clock driver

The patch adds support for TI gate clock binding. The code is based on
the drivers/clk/ti/gate.c driver of the Linux kernel version 5.9-rc7.
For DT binding details see:
- Documentation/devicetree/bindings/clock/ti/gate.txt

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: ti: add divider clock driver

The patch adds support for TI divider clock binding. The driver uses
routines provided by the common clock framework (ccf).

The code is based on the drivers/clk/ti/divider.c driver of the Linux
kernel version 5.9-rc7.
For DT binding details see:
- Documentation/devicetree/bindings/clock/ti/divider.txt

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: ti: am33xx: add DPLL clock drivers

The digital phase-locked loop (DPLL) provides all interface clocks and
functional clocks to the processor of the AM33xx device. The AM33xx
device integrates five different DPLLs:
* Core DPLL
* Per DPLL
* LCD DPLL
* DDR DPLL
* MPU DPLL

The patch adds support for the compatible strings:
* "ti,am3-dpll-core-clock"
* "ti,am3-dpll-no-gate-clock"
* "ti,am3-dpll-no-gate-j-type-clock"
* "ti,am3-dpll-x2-clock"

The code is loosely based on the drivers/clk/ti/dpll.c drivers of the
Linux kernel version 5.9-rc7.
For DT binding details see:
- Documentation/devicetree/bindings/clock/ti/dpll.txt

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: ti: add mux clock driver

The driver manages a register-mapped multiplexer with multiple input
clock signals or parents, one of which can be selected as output. It
uses routines provided by the common clock framework (ccf).

The code is based on the drivers/clk/ti/mux.c driver of the Linux
kernel version 5.9-rc7.
For DT binding details see:
- Documentation/devicetree/bindings/clock/ti/mux.txt

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: move clk-ti-sci driver to 'ti' directory

The patch moves the clk-ti-sci.c file to the 'ti' directory along with
all the other TI's drivers, and renames it clk-sci.c.

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: ti: add support for clkctrl clocks

Until now the clkctrl clocks have been enabled/disabled through platform
routines. Thanks to this patch they can be enabled and configured directly
by the probed devices that need to use them.

For DT binding details see Linux doc:
- Documentation/devicetree/bindings/clock/ti-clkctrl.txt

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: ti: add gate clock driver

The patch adds support for TI gate clock binding. The code is based on
the drivers/clk/ti/gate.c driver of the Linux kernel version 5.9-rc7.
For DT binding details see:
- Documentation/devicetree/bindings/clock/ti/gate.txt

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: ti: add divider clock driver

The patch adds support for TI divider clock binding. The driver uses
routines provided by the common clock framework (ccf).

The code is based on the drivers/clk/ti/divider.c driver of the Linux
kernel version 5.9-rc7.
For DT binding details see:
- Documentation/devicetree/bindings/clock/ti/divider.txt

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: ti: am33xx: add DPLL clock drivers

The digital phase-locked loop (DPLL) provides all interface clocks and
functional clocks to the processor of the AM33xx device. The AM33xx
device integrates five different DPLLs:
* Core DPLL
* Per DPLL
* LCD DPLL
* DDR DPLL
* MPU DPLL

The patch adds support for the compatible strings:
* "ti,am3-dpll-core-clock"
* "ti,am3-dpll-no-gate-clock"
* "ti,am3-dpll-no-gate-j-type-clock"
* "ti,am3-dpll-x2-clock"

The code is loosely based on the drivers/clk/ti/dpll.c drivers of the
Linux kernel version 5.9-rc7.
For DT binding details see:
- Documentation/devicetree/bindings/clock/ti/dpll.txt

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: ti: add mux clock driver

The driver manages a register-mapped multiplexer with multiple input
clock signals or parents, one of which can be selected as output. It
uses routines provided by the common clock framework (ccf).

The code is based on the drivers/clk/ti/mux.c driver of the Linux
kernel version 5.9-rc7.
For DT binding details see:
- Documentation/devicetree/bindings/clock/ti/mux.txt

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: move clk-ti-sci driver to 'ti' directory

The patch moves the clk-ti-sci.c file to the 'ti' directory along with
all the other TI's drivers, and renames it clk-sci.c.

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: ti: add support for clkctrl clocks

Until now the clkctrl clocks have been enabled/disabled through platform
routines. Thanks to this patch they can be enabled and configured directly
by the probed devices that need to use them.

For DT binding details see Linux doc:
- Documentation/devicetree/bindings/clock/ti-clkctrl.txt

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: ti: add gate clock driver

The patch adds support for TI gate clock binding. The code is based on
the drivers/clk/ti/gate.c driver of the Linux kernel version 5.9-rc7.
For DT binding details see:
- Documentation/devicetree/bindings/clock/ti/gate.txt

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: ti: add divider clock driver

The patch adds support for TI divider clock binding. The driver uses
routines provided by the common clock framework (ccf).

The code is based on the drivers/clk/ti/divider.c driver of the Linux
kernel version 5.9-rc7.
For DT binding details see:
- Documentation/devicetree/bindings/clock/ti/divider.txt

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: ti: am33xx: add DPLL clock drivers

The digital phase-locked loop (DPLL) provides all interface clocks and
functional clocks to the processor of the AM33xx device. The AM33xx
device integrates five different DPLLs:
* Core DPLL
* Per DPLL
* LCD DPLL
* DDR DPLL
* MPU DPLL

The patch adds support for the compatible strings:
* "ti,am3-dpll-core-clock"
* "ti,am3-dpll-no-gate-clock"
* "ti,am3-dpll-no-gate-j-type-clock"
* "ti,am3-dpll-x2-clock"

The code is loosely based on the drivers/clk/ti/dpll.c drivers of the
Linux kernel version 5.9-rc7.
For DT binding details see:
- Documentation/devicetree/bindings/clock/ti/dpll.txt

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: ti: add mux clock driver

The driver manages a register-mapped multiplexer with multiple input
clock signals or parents, one of which can be selected as output. It
uses routines provided by the common clock framework (ccf).

The code is based on the drivers/clk/ti/mux.c driver of the Linux
kernel version 5.9-rc7.
For DT binding details see:
- Documentation/devicetree/bindings/clock/ti/mux.txt

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: move clk-ti-sci driver to 'ti' directory

The patch moves the clk-ti-sci.c file to the 'ti' directory along with
all the other TI's drivers, and renames it clk-sci.c.

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: ti: add support for clkctrl clocks

Until now the clkctrl clocks have been enabled/disabled through platform
routines. Thanks to this patch they can be enabled and configured directly
by the probed devices that need to use them.

For DT binding details see Linux doc:
- Documentation/devicetree/bindings/clock/ti-clkctrl.txt

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: ti: add gate clock driver

The patch adds support for TI gate clock binding. The code is based on
the drivers/clk/ti/gate.c driver of the Linux kernel version 5.9-rc7.
For DT binding details see:
- Documentation/devicetree/bindings/clock/ti/gate.txt

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: ti: add divider clock driver

The patch adds support for TI divider clock binding. The driver uses
routines provided by the common clock framework (ccf).

The code is based on the drivers/clk/ti/divider.c driver of the Linux
kernel version 5.9-rc7.
For DT binding details see:
- Documentation/devicetree/bindings/clock/ti/divider.txt

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: ti: am33xx: add DPLL clock drivers

The digital phase-locked loop (DPLL) provides all interface clocks and
functional clocks to the processor of the AM33xx device. The AM33xx
device integrates five different DPLLs:
* Core DPLL
* Per DPLL
* LCD DPLL
* DDR DPLL
* MPU DPLL

The patch adds support for the compatible strings:
* "ti,am3-dpll-core-clock"
* "ti,am3-dpll-no-gate-clock"
* "ti,am3-dpll-no-gate-j-type-clock"
* "ti,am3-dpll-x2-clock"

The code is loosely based on the drivers/clk/ti/dpll.c drivers of the
Linux kernel version 5.9-rc7.
For DT binding details see:
- Documentation/devicetree/bindings/clock/ti/dpll.txt

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: ti: add mux clock driver

The driver manages a register-mapped multiplexer with multiple input
clock signals or parents, one of which can be selected as output. It
uses routines provided by the common clock framework (ccf).

The code is based on the drivers/clk/ti/mux.c driver of the Linux
kernel version 5.9-rc7.
For DT binding details see:
- Documentation/devicetree/bindings/clock/ti/mux.txt

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: move clk-ti-sci driver to 'ti' directory

The patch moves the clk-ti-sci.c file to the 'ti' directory along with
all the other TI's drivers, and renames it clk-sci.c.

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: ti: add support for clkctrl clocks

Until now the clkctrl clocks have been enabled/disabled through platform
routines. Thanks to this patch they can be enabled and configured directly
by the probed devices that need to use them.

For DT binding details see Linux doc:
- Documentation/devicetree/bindings/clock/ti-clkctrl.txt

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: ti: add gate clock driver

The patch adds support for TI gate clock binding. The code is based on
the drivers/clk/ti/gate.c driver of the Linux kernel version 5.9-rc7.
For DT binding details see:
- Documentation/devicetree/bindings/clock/ti/gate.txt

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: ti: add divider clock driver

The patch adds support for TI divider clock binding. The driver uses
routines provided by the common clock framework (ccf).

The code is based on the drivers/clk/ti/divider.c driver of the Linux
kernel version 5.9-rc7.
For DT binding details see:
- Documentation/devicetree/bindings/clock/ti/divider.txt

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: ti: am33xx: add DPLL clock drivers

The digital phase-locked loop (DPLL) provides all interface clocks and
functional clocks to the processor of the AM33xx device. The AM33xx
device integrates five different DPLLs:
* Core DPLL
* Per DPLL
* LCD DPLL
* DDR DPLL
* MPU DPLL

The patch adds support for the compatible strings:
* "ti,am3-dpll-core-clock"
* "ti,am3-dpll-no-gate-clock"
* "ti,am3-dpll-no-gate-j-type-clock"
* "ti,am3-dpll-x2-clock"

The code is loosely based on the drivers/clk/ti/dpll.c drivers of the
Linux kernel version 5.9-rc7.
For DT binding details see:
- Documentation/devicetree/bindings/clock/ti/dpll.txt

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: ti: add mux clock driver

The driver manages a register-mapped multiplexer with multiple input
clock signals or parents, one of which can be selected as output. It
uses routines provided by the common clock framework (ccf).

The code is based on the drivers/clk/ti/mux.c driver of the Linux
kernel version 5.9-rc7.
For DT binding details see:
- Documentation/devicetree/bindings/clock/ti/mux.txt

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: move clk-ti-sci driver to 'ti' directory

The patch moves the clk-ti-sci.c file to the 'ti' directory along with
all the other TI's drivers, and renames it clk-sci.c.

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: ti: add support for clkctrl clocks

Until now the clkctrl clocks have been enabled/disabled through platform
routines. Thanks to this patch they can be enabled and configured directly
by the probed devices that need to use them.

For DT binding details see Linux doc:
- Documentation/devicetree/bindings/clock/ti-clkctrl.txt

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: ti: add gate clock driver

The patch adds support for TI gate clock binding. The code is based on
the drivers/clk/ti/gate.c driver of the Linux kernel version 5.9-rc7.
For DT binding details see:
- Documentation/devicetree/bindings/clock/ti/gate.txt

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: ti: add divider clock driver

The patch adds support for TI divider clock binding. The driver uses
routines provided by the common clock framework (ccf).

The code is based on the drivers/clk/ti/divider.c driver of the Linux
kernel version 5.9-rc7.
For DT binding details see:
- Documentation/devicetree/bindings/clock/ti/divider.txt

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: ti: am33xx: add DPLL clock drivers

The digital phase-locked loop (DPLL) provides all interface clocks and
functional clocks to the processor of the AM33xx device. The AM33xx
device integrates five different DPLLs:
* Core DPLL
* Per DPLL
* LCD DPLL
* DDR DPLL
* MPU DPLL

The patch adds support for the compatible strings:
* "ti,am3-dpll-core-clock"
* "ti,am3-dpll-no-gate-clock"
* "ti,am3-dpll-no-gate-j-type-clock"
* "ti,am3-dpll-x2-clock"

The code is loosely based on the drivers/clk/ti/dpll.c drivers of the
Linux kernel version 5.9-rc7.
For DT binding details see:
- Documentation/devicetree/bindings/clock/ti/dpll.txt

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: ti: add mux clock driver

The driver manages a register-mapped multiplexer with multiple input
clock signals or parents, one of which can be selected as output. It
uses routines provided by the common clock framework (ccf).

The code is based on the drivers/clk/ti/mux.c driver of the Linux
kernel version 5.9-rc7.
For DT binding details see:
- Documentation/devicetree/bindings/clock/ti/mux.txt

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: move clk-ti-sci driver to 'ti' directory

The patch moves the clk-ti-sci.c file to the 'ti' directory along with
all the other TI's drivers, and renames it clk-sci.c.

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: ti: add support for clkctrl clocks

Until now the clkctrl clocks have been enabled/disabled through platform
routines. Thanks to this patch they can be enabled and configured directly
by the probed devices that need to use them.

For DT binding details see Linux doc:
- Documentation/devicetree/bindings/clock/ti-clkctrl.txt

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: ti: add gate clock driver

The patch adds support for TI gate clock binding. The code is based on
the drivers/clk/ti/gate.c driver of the Linux kernel version 5.9-rc7.
For DT binding details see:
- Documentation/devicetree/bindings/clock/ti/gate.txt

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: ti: add divider clock driver

The patch adds support for TI divider clock binding. The driver uses
routines provided by the common clock framework (ccf).

The code is based on the drivers/clk/ti/divider.c driver of the Linux
kernel version 5.9-rc7.
For DT binding details see:
- Documentation/devicetree/bindings/clock/ti/divider.txt

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: ti: am33xx: add DPLL clock drivers

The digital phase-locked loop (DPLL) provides all interface clocks and
functional clocks to the processor of the AM33xx device. The AM33xx
device integrates five different DPLLs:
* Core DPLL
* Per DPLL
* LCD DPLL
* DDR DPLL
* MPU DPLL

The patch adds support for the compatible strings:
* "ti,am3-dpll-core-clock"
* "ti,am3-dpll-no-gate-clock"
* "ti,am3-dpll-no-gate-j-type-clock"
* "ti,am3-dpll-x2-clock"

The code is loosely based on the drivers/clk/ti/dpll.c drivers of the
Linux kernel version 5.9-rc7.
For DT binding details see:
- Documentation/devicetree/bindings/clock/ti/dpll.txt

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: ti: add mux clock driver

The driver manages a register-mapped multiplexer with multiple input
clock signals or parents, one of which can be selected as output. It
uses routines provided by the common clock framework (ccf).

The code is based on the drivers/clk/ti/mux.c driver of the Linux
kernel version 5.9-rc7.
For DT binding details see:
- Documentation/devicetree/bindings/clock/ti/mux.txt

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: move clk-ti-sci driver to 'ti' directory

The patch moves the clk-ti-sci.c file to the 'ti' directory along with
all the other TI's drivers, and renames it clk-sci.c.

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: ti: add support for clkctrl clocks

Until now the clkctrl clocks have been enabled/disabled through platform
routines. Thanks to this patch they can be enabled and configured directly
by the probed devices that need to use them.

For DT binding details see Linux doc:
- Documentation/devicetree/bindings/clock/ti-clkctrl.txt

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: ti: add gate clock driver

The patch adds support for TI gate clock binding. The code is based on
the drivers/clk/ti/gate.c driver of the Linux kernel version 5.9-rc7.
For DT binding details see:
- Documentation/devicetree/bindings/clock/ti/gate.txt

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: ti: add divider clock driver

The patch adds support for TI divider clock binding. The driver uses
routines provided by the common clock framework (ccf).

The code is based on the drivers/clk/ti/divider.c driver of the Linux
kernel version 5.9-rc7.
For DT binding details see:
- Documentation/devicetree/bindings/clock/ti/divider.txt

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: ti: am33xx: add DPLL clock drivers

The digital phase-locked loop (DPLL) provides all interface clocks and
functional clocks to the processor of the AM33xx device. The AM33xx
device integrates five different DPLLs:
* Core DPLL
* Per DPLL
* LCD DPLL
* DDR DPLL
* MPU DPLL

The patch adds support for the compatible strings:
* "ti,am3-dpll-core-clock"
* "ti,am3-dpll-no-gate-clock"
* "ti,am3-dpll-no-gate-j-type-clock"
* "ti,am3-dpll-x2-clock"

The code is loosely based on the drivers/clk/ti/dpll.c drivers of the
Linux kernel version 5.9-rc7.
For DT binding details see:
- Documentation/devicetree/bindings/clock/ti/dpll.txt

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: ti: add mux clock driver

The driver manages a register-mapped multiplexer with multiple input
clock signals or parents, one of which can be selected as output. It
uses routines provided by the common clock framework (ccf).

The code is based on the drivers/clk/ti/mux.c driver of the Linux
kernel version 5.9-rc7.
For DT binding details see:
- Documentation/devicetree/bindings/clock/ti/mux.txt

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: move clk-ti-sci driver to 'ti' directory

The patch moves the clk-ti-sci.c file to the 'ti' directory along with
all the other TI's drivers, and renames it clk-sci.c.

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: ti: add support for clkctrl clocks

Until now the clkctrl clocks have been enabled/disabled through platform
routines. Thanks to this patch they can be enabled and configured directly
by the probed devices that need to use them.

For DT binding details see Linux doc:
- Documentation/devicetree/bindings/clock/ti-clkctrl.txt

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: ti: add gate clock driver

The patch adds support for TI gate clock binding. The code is based on
the drivers/clk/ti/gate.c driver of the Linux kernel version 5.9-rc7.
For DT binding details see:
- Documentation/devicetree/bindings/clock/ti/gate.txt

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: ti: add divider clock driver

The patch adds support for TI divider clock binding. The driver uses
routines provided by the common clock framework (ccf).

The code is based on the drivers/clk/ti/divider.c driver of the Linux
kernel version 5.9-rc7.
For DT binding details see:
- Documentation/devicetree/bindings/clock/ti/divider.txt

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: ti: am33xx: add DPLL clock drivers

The digital phase-locked loop (DPLL) provides all interface clocks and
functional clocks to the processor of the AM33xx device. The AM33xx
device integrates five different DPLLs:
* Core DPLL
* Per DPLL
* LCD DPLL
* DDR DPLL
* MPU DPLL

The patch adds support for the compatible strings:
* "ti,am3-dpll-core-clock"
* "ti,am3-dpll-no-gate-clock"
* "ti,am3-dpll-no-gate-j-type-clock"
* "ti,am3-dpll-x2-clock"

The code is loosely based on the drivers/clk/ti/dpll.c drivers of the
Linux kernel version 5.9-rc7.
For DT binding details see:
- Documentation/devicetree/bindings/clock/ti/dpll.txt

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: ti: add mux clock driver

The driver manages a register-mapped multiplexer with multiple input
clock signals or parents, one of which can be selected as output. It
uses routines provided by the common clock framework (ccf).

The code is based on the drivers/clk/ti/mux.c driver of the Linux
kernel version 5.9-rc7.
For DT binding details see:
- Documentation/devicetree/bindings/clock/ti/mux.txt

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: move clk-ti-sci driver to 'ti' directory

The patch moves the clk-ti-sci.c file to the 'ti' directory along with
all the other TI's drivers, and renames it clk-sci.c.

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: ti: add support for clkctrl clocks

Until now the clkctrl clocks have been enabled/disabled through platform
routines. Thanks to this patch they can be enabled and configured directly
by the probed devices that need to use them.

For DT binding details see Linux doc:
- Documentation/devicetree/bindings/clock/ti-clkctrl.txt

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: ti: add gate clock driver

The patch adds support for TI gate clock binding. The code is based on
the drivers/clk/ti/gate.c driver of the Linux kernel version 5.9-rc7.
For DT binding details see:
- Documentation/devicetree/bindings/clock/ti/gate.txt

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: ti: add divider clock driver

The patch adds support for TI divider clock binding. The driver uses
routines provided by the common clock framework (ccf).

The code is based on the drivers/clk/ti/divider.c driver of the Linux
kernel version 5.9-rc7.
For DT binding details see:
- Documentation/devicetree/bindings/clock/ti/divider.txt

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: ti: am33xx: add DPLL clock drivers

The digital phase-locked loop (DPLL) provides all interface clocks and
functional clocks to the processor of the AM33xx device. The AM33xx
device integrates five different DPLLs:
* Core DPLL
* Per DPLL
* LCD DPLL
* DDR DPLL
* MPU DPLL

The patch adds support for the compatible strings:
* "ti,am3-dpll-core-clock"
* "ti,am3-dpll-no-gate-clock"
* "ti,am3-dpll-no-gate-j-type-clock"
* "ti,am3-dpll-x2-clock"

The code is loosely based on the drivers/clk/ti/dpll.c drivers of the
Linux kernel version 5.9-rc7.
For DT binding details see:
- Documentation/devicetree/bindings/clock/ti/dpll.txt

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: ti: add mux clock driver

The driver manages a register-mapped multiplexer with multiple input
clock signals or parents, one of which can be selected as output. It
uses routines provided by the common clock framework (ccf).

The code is based on the drivers/clk/ti/mux.c driver of the Linux
kernel version 5.9-rc7.
For DT binding details see:
- Documentation/devicetree/bindings/clock/ti/mux.txt

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: move clk-ti-sci driver to 'ti' directory

The patch moves the clk-ti-sci.c file to the 'ti' directory along with
all the other TI's drivers, and renames it clk-sci.c.

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: ti: add support for clkctrl clocks

Until now the clkctrl clocks have been enabled/disabled through platform
routines. Thanks to this patch they can be enabled and configured directly
by the probed devices that need to use them.

For DT binding details see Linux doc:
- Documentation/devicetree/bindings/clock/ti-clkctrl.txt

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: ti: add gate clock driver

The patch adds support for TI gate clock binding. The code is based on
the drivers/clk/ti/gate.c driver of the Linux kernel version 5.9-rc7.
For DT binding details see:
- Documentation/devicetree/bindings/clock/ti/gate.txt

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: ti: add divider clock driver

The patch adds support for TI divider clock binding. The driver uses
routines provided by the common clock framework (ccf).

The code is based on the drivers/clk/ti/divider.c driver of the Linux
kernel version 5.9-rc7.
For DT binding details see:
- Documentation/devicetree/bindings/clock/ti/divider.txt

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: ti: am33xx: add DPLL clock drivers

The digital phase-locked loop (DPLL) provides all interface clocks and
functional clocks to the processor of the AM33xx device. The AM33xx
device integrates five different DPLLs:
* Core DPLL
* Per DPLL
* LCD DPLL
* DDR DPLL
* MPU DPLL

The patch adds support for the compatible strings:
* "ti,am3-dpll-core-clock"
* "ti,am3-dpll-no-gate-clock"
* "ti,am3-dpll-no-gate-j-type-clock"
* "ti,am3-dpll-x2-clock"

The code is loosely based on the drivers/clk/ti/dpll.c drivers of the
Linux kernel version 5.9-rc7.
For DT binding details see:
- Documentation/devicetree/bindings/clock/ti/dpll.txt

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: ti: add mux clock driver

The driver manages a register-mapped multiplexer with multiple input
clock signals or parents, one of which can be selected as output. It
uses routines provided by the common clock framework (ccf).

The code is based on the drivers/clk/ti/mux.c driver of the Linux
kernel version 5.9-rc7.
For DT binding details see:
- Documentation/devicetree/bindings/clock/ti/mux.txt

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: move clk-ti-sci driver to 'ti' directory

The patch moves the clk-ti-sci.c file to the 'ti' directory along with
all the other TI's drivers, and renames it clk-sci.c.

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: ti: add support for clkctrl clocks

Until now the clkctrl clocks have been enabled/disabled through platform
routines. Thanks to this patch they can be enabled and configured directly
by the probed devices that need to use them.

For DT binding details see Linux doc:
- Documentation/devicetree/bindings/clock/ti-clkctrl.txt

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: ti: add gate clock driver

The patch adds support for TI gate clock binding. The code is based on
the drivers/clk/ti/gate.c driver of the Linux kernel version 5.9-rc7.
For DT binding details see:
- Documentation/devicetree/bindings/clock/ti/gate.txt

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: ti: add divider clock driver

The patch adds support for TI divider clock binding. The driver uses
routines provided by the common clock framework (ccf).

The code is based on the drivers/clk/ti/divider.c driver of the Linux
kernel version 5.9-rc7.
For DT binding details see:
- Documentation/devicetree/bindings/clock/ti/divider.txt

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: ti: am33xx: add DPLL clock drivers

The digital phase-locked loop (DPLL) provides all interface clocks and
functional clocks to the processor of the AM33xx device. The AM33xx
device integrates five different DPLLs:
* Core DPLL
* Per DPLL
* LCD DPLL
* DDR DPLL
* MPU DPLL

The patch adds support for the compatible strings:
* "ti,am3-dpll-core-clock"
* "ti,am3-dpll-no-gate-clock"
* "ti,am3-dpll-no-gate-j-type-clock"
* "ti,am3-dpll-x2-clock"

The code is loosely based on the drivers/clk/ti/dpll.c drivers of the
Linux kernel version 5.9-rc7.
For DT binding details see:
- Documentation/devicetree/bindings/clock/ti/dpll.txt

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: ti: add mux clock driver

The driver manages a register-mapped multiplexer with multiple input
clock signals or parents, one of which can be selected as output. It
uses routines provided by the common clock framework (ccf).

The code is based on the drivers/clk/ti/mux.c driver of the Linux
kernel version 5.9-rc7.
For DT binding details see:
- Documentation/devicetree/bindings/clock/ti/mux.txt

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: move clk-ti-sci driver to 'ti' directory

The patch moves the clk-ti-sci.c file to the 'ti' directory along with
all the other TI's drivers, and renames it clk-sci.c.

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: ti: add support for clkctrl clocks

Until now the clkctrl clocks have been enabled/disabled through platform
routines. Thanks to this patch they can be enabled and configured directly
by the probed devices that need to use them.

For DT binding details see Linux doc:
- Documentation/devicetree/bindings/clock/ti-clkctrl.txt

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: ti: add gate clock driver

The patch adds support for TI gate clock binding. The code is based on
the drivers/clk/ti/gate.c driver of the Linux kernel version 5.9-rc7.
For DT binding details see:
- Documentation/devicetree/bindings/clock/ti/gate.txt

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: ti: add divider clock driver

The patch adds support for TI divider clock binding. The driver uses
routines provided by the common clock framework (ccf).

The code is based on the drivers/clk/ti/divider.c driver of the Linux
kernel version 5.9-rc7.
For DT binding details see:
- Documentation/devicetree/bindings/clock/ti/divider.txt

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: ti: am33xx: add DPLL clock drivers

The digital phase-locked loop (DPLL) provides all interface clocks and
functional clocks to the processor of the AM33xx device. The AM33xx
device integrates five different DPLLs:
* Core DPLL
* Per DPLL
* LCD DPLL
* DDR DPLL
* MPU DPLL

The patch adds support for the compatible strings:
* "ti,am3-dpll-core-clock"
* "ti,am3-dpll-no-gate-clock"
* "ti,am3-dpll-no-gate-j-type-clock"
* "ti,am3-dpll-x2-clock"

The code is loosely based on the drivers/clk/ti/dpll.c drivers of the
Linux kernel version 5.9-rc7.
For DT binding details see:
- Documentation/devicetree/bindings/clock/ti/dpll.txt

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: ti: add mux clock driver

The driver manages a register-mapped multiplexer with multiple input
clock signals or parents, one of which can be selected as output. It
uses routines provided by the common clock framework (ccf).

The code is based on the drivers/clk/ti/mux.c driver of the Linux
kernel version 5.9-rc7.
For DT binding details see:
- Documentation/devicetree/bindings/clock/ti/mux.txt

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: move clk-ti-sci driver to 'ti' directory

The patch moves the clk-ti-sci.c file to the 'ti' directory along with
all the other TI's drivers, and renames it clk-sci.c.

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: ti: add support for clkctrl clocks

Until now the clkctrl clocks have been enabled/disabled through platform
routines. Thanks to this patch they can be enabled and configured directly
by the probed devices that need to use them.

For DT binding details see Linux doc:
- Documentation/devicetree/bindings/clock/ti-clkctrl.txt

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: ti: add gate clock driver

The patch adds support for TI gate clock binding. The code is based on
the drivers/clk/ti/gate.c driver of the Linux kernel version 5.9-rc7.
For DT binding details see:
- Documentation/devicetree/bindings/clock/ti/gate.txt

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: ti: add divider clock driver

The patch adds support for TI divider clock binding. The driver uses
routines provided by the common clock framework (ccf).

The code is based on the drivers/clk/ti/divider.c driver of the Linux
kernel version 5.9-rc7.
For DT binding details see:
- Documentation/devicetree/bindings/clock/ti/divider.txt

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: ti: am33xx: add DPLL clock drivers

The digital phase-locked loop (DPLL) provides all interface clocks and
functional clocks to the processor of the AM33xx device. The AM33xx
device integrates five different DPLLs:
* Core DPLL
* Per DPLL
* LCD DPLL
* DDR DPLL
* MPU DPLL

The patch adds support for the compatible strings:
* "ti,am3-dpll-core-clock"
* "ti,am3-dpll-no-gate-clock"
* "ti,am3-dpll-no-gate-j-type-clock"
* "ti,am3-dpll-x2-clock"

The code is loosely based on the drivers/clk/ti/dpll.c drivers of the
Linux kernel version 5.9-rc7.
For DT binding details see:
- Documentation/devicetree/bindings/clock/ti/dpll.txt

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: ti: add mux clock driver

The driver manages a register-mapped multiplexer with multiple input
clock signals or parents, one of which can be selected as output. It
uses routines provided by the common clock framework (ccf).

The code is based on the drivers/clk/ti/mux.c driver of the Linux
kernel version 5.9-rc7.
For DT binding details see:
- Documentation/devicetree/bindings/clock/ti/mux.txt

Signed-off-by: Dario Binacchi <dariobin@libero.it>

clk: move clk-ti-sci driver to 'ti' directory

The patch moves the clk-ti-sci.c file to the 'ti' directory along with
all the other TI's drivers, and renames it clk-sci.c.

Signed-off-by: Dario Binacchi <dariobin@libero.it>