Revert "Merge patch series "arm: dts: am62-beagleplay: Fix Beagleplay Ethernet""

When bringing in the series 'arm: dts: am62-beagleplay: Fix Beagleplay
Ethernet"' I failed to notice that b4 noticed it was based on next and
so took that as the base commit and merged that part of next to master.

This reverts commit c8ffd1356d42223cbb8c86280a083cc3c93e6426, reversing
changes made to 2ee6f3a5f7550de3599faef9704e166e5dcace35.

Reported-by: Jonas Karlman <jonas@kwiboo.se>
Signed-off-by: Tom Rini <trini@konsulko.com>

clk: Remove <common.h> and add needed includes

Remove <common.h> from this driver directory and when needed
add missing include files directly.

Signed-off-by: Tom Rini <trini@konsulko.com>

dm: core: Require users of devres to include the header

At present devres.h is included in all files that include dm.h but few
make use of it. Also this pulls in linux/compat which adds several more
headers. Drop the automatic inclusion and require files to include devres
themselves. This provides a good indication of which files use devres.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Anatolij Gustschin <agust@denx.de>

clk: imx: pfd: add set_rate()

Implement set_rate() for pfd.

Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Reviewed-by: Lukasz Majewski <lukma@denx.de>

clk: Port Linux common clock framework [CCF] for imx6q to U-boot (tag: v5.1.12)

This patch brings the files from Linux kernel (linux-stable/linux-5.1.y
SHA1: 5752b50477da)to provide clocks support as it is used on the Linux
kernel with Common Clock Framework [CCF] setup.

The directory structure has been preserved. The ported code only supports
reading information from PLL, MUX, Divider, etc and enabling/disabling
the clocks USDHCx/ECSPIx depending on used bus. Moreover, it is agnostic
to the alias numbering as the information about the clock is read from the
device tree.

One needs to pay attention to the comments indicating necessary for U-Boot's
driver model changes.

If needed, the code can be extended to support the "set" part of the clock
management.

Signed-off-by: Lukasz Majewski <lukma@denx.de>

clk: Remove <common.h> and add needed includes

Remove <common.h> from this driver directory and when needed
add missing include files directly.

Signed-off-by: Tom Rini <trini@konsulko.com>

dm: core: Require users of devres to include the header

At present devres.h is included in all files that include dm.h but few
make use of it. Also this pulls in linux/compat which adds several more
headers. Drop the automatic inclusion and require files to include devres
themselves. This provides a good indication of which files use devres.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Anatolij Gustschin <agust@denx.de>

clk: imx: pfd: add set_rate()

Implement set_rate() for pfd.

Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Reviewed-by: Lukasz Majewski <lukma@denx.de>

clk: Port Linux common clock framework [CCF] for imx6q to U-boot (tag: v5.1.12)

This patch brings the files from Linux kernel (linux-stable/linux-5.1.y
SHA1: 5752b50477da)to provide clocks support as it is used on the Linux
kernel with Common Clock Framework [CCF] setup.

The directory structure has been preserved. The ported code only supports
reading information from PLL, MUX, Divider, etc and enabling/disabling
the clocks USDHCx/ECSPIx depending on used bus. Moreover, it is agnostic
to the alias numbering as the information about the clock is read from the
device tree.

One needs to pay attention to the comments indicating necessary for U-Boot's
driver model changes.

If needed, the code can be extended to support the "set" part of the clock
management.

Signed-off-by: Lukasz Majewski <lukma@denx.de>

dm: core: Require users of devres to include the header

At present devres.h is included in all files that include dm.h but few
make use of it. Also this pulls in linux/compat which adds several more
headers. Drop the automatic inclusion and require files to include devres
themselves. This provides a good indication of which files use devres.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Anatolij Gustschin <agust@denx.de>

clk: imx: pfd: add set_rate()

Implement set_rate() for pfd.

Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Reviewed-by: Lukasz Majewski <lukma@denx.de>

clk: Port Linux common clock framework [CCF] for imx6q to U-boot (tag: v5.1.12)

This patch brings the files from Linux kernel (linux-stable/linux-5.1.y
SHA1: 5752b50477da)to provide clocks support as it is used on the Linux
kernel with Common Clock Framework [CCF] setup.

The directory structure has been preserved. The ported code only supports
reading information from PLL, MUX, Divider, etc and enabling/disabling
the clocks USDHCx/ECSPIx depending on used bus. Moreover, it is agnostic
to the alias numbering as the information about the clock is read from the
device tree.

One needs to pay attention to the comments indicating necessary for U-Boot's
driver model changes.

If needed, the code can be extended to support the "set" part of the clock
management.

Signed-off-by: Lukasz Majewski <lukma@denx.de>

dm: core: Require users of devres to include the header

At present devres.h is included in all files that include dm.h but few
make use of it. Also this pulls in linux/compat which adds several more
headers. Drop the automatic inclusion and require files to include devres
themselves. This provides a good indication of which files use devres.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Anatolij Gustschin <agust@denx.de>

clk: imx: pfd: add set_rate()

Implement set_rate() for pfd.

Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Reviewed-by: Lukasz Majewski <lukma@denx.de>

clk: Port Linux common clock framework [CCF] for imx6q to U-boot (tag: v5.1.12)

This patch brings the files from Linux kernel (linux-stable/linux-5.1.y
SHA1: 5752b50477da)to provide clocks support as it is used on the Linux
kernel with Common Clock Framework [CCF] setup.

The directory structure has been preserved. The ported code only supports
reading information from PLL, MUX, Divider, etc and enabling/disabling
the clocks USDHCx/ECSPIx depending on used bus. Moreover, it is agnostic
to the alias numbering as the information about the clock is read from the
device tree.

One needs to pay attention to the comments indicating necessary for U-Boot's
driver model changes.

If needed, the code can be extended to support the "set" part of the clock
management.

Signed-off-by: Lukasz Majewski <lukma@denx.de>

dm: core: Require users of devres to include the header

At present devres.h is included in all files that include dm.h but few
make use of it. Also this pulls in linux/compat which adds several more
headers. Drop the automatic inclusion and require files to include devres
themselves. This provides a good indication of which files use devres.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Anatolij Gustschin <agust@denx.de>

clk: imx: pfd: add set_rate()

Implement set_rate() for pfd.

Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Reviewed-by: Lukasz Majewski <lukma@denx.de>

clk: Port Linux common clock framework [CCF] for imx6q to U-boot (tag: v5.1.12)

This patch brings the files from Linux kernel (linux-stable/linux-5.1.y
SHA1: 5752b50477da)to provide clocks support as it is used on the Linux
kernel with Common Clock Framework [CCF] setup.

The directory structure has been preserved. The ported code only supports
reading information from PLL, MUX, Divider, etc and enabling/disabling
the clocks USDHCx/ECSPIx depending on used bus. Moreover, it is agnostic
to the alias numbering as the information about the clock is read from the
device tree.

One needs to pay attention to the comments indicating necessary for U-Boot's
driver model changes.

If needed, the code can be extended to support the "set" part of the clock
management.

Signed-off-by: Lukasz Majewski <lukma@denx.de>

dm: core: Require users of devres to include the header

At present devres.h is included in all files that include dm.h but few
make use of it. Also this pulls in linux/compat which adds several more
headers. Drop the automatic inclusion and require files to include devres
themselves. This provides a good indication of which files use devres.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Anatolij Gustschin <agust@denx.de>

clk: imx: pfd: add set_rate()

Implement set_rate() for pfd.

Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Reviewed-by: Lukasz Majewski <lukma@denx.de>

clk: Port Linux common clock framework [CCF] for imx6q to U-boot (tag: v5.1.12)

This patch brings the files from Linux kernel (linux-stable/linux-5.1.y
SHA1: 5752b50477da)to provide clocks support as it is used on the Linux
kernel with Common Clock Framework [CCF] setup.

The directory structure has been preserved. The ported code only supports
reading information from PLL, MUX, Divider, etc and enabling/disabling
the clocks USDHCx/ECSPIx depending on used bus. Moreover, it is agnostic
to the alias numbering as the information about the clock is read from the
device tree.

One needs to pay attention to the comments indicating necessary for U-Boot's
driver model changes.

If needed, the code can be extended to support the "set" part of the clock
management.

Signed-off-by: Lukasz Majewski <lukma@denx.de>

dm: core: Require users of devres to include the header

At present devres.h is included in all files that include dm.h but few
make use of it. Also this pulls in linux/compat which adds several more
headers. Drop the automatic inclusion and require files to include devres
themselves. This provides a good indication of which files use devres.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Anatolij Gustschin <agust@denx.de>

clk: imx: pfd: add set_rate()

Implement set_rate() for pfd.

Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Reviewed-by: Lukasz Majewski <lukma@denx.de>

clk: Port Linux common clock framework [CCF] for imx6q to U-boot (tag: v5.1.12)

This patch brings the files from Linux kernel (linux-stable/linux-5.1.y
SHA1: 5752b50477da)to provide clocks support as it is used on the Linux
kernel with Common Clock Framework [CCF] setup.

The directory structure has been preserved. The ported code only supports
reading information from PLL, MUX, Divider, etc and enabling/disabling
the clocks USDHCx/ECSPIx depending on used bus. Moreover, it is agnostic
to the alias numbering as the information about the clock is read from the
device tree.

One needs to pay attention to the comments indicating necessary for U-Boot's
driver model changes.

If needed, the code can be extended to support the "set" part of the clock
management.

Signed-off-by: Lukasz Majewski <lukma@denx.de>

dm: core: Require users of devres to include the header

At present devres.h is included in all files that include dm.h but few
make use of it. Also this pulls in linux/compat which adds several more
headers. Drop the automatic inclusion and require files to include devres
themselves. This provides a good indication of which files use devres.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Anatolij Gustschin <agust@denx.de>

clk: imx: pfd: add set_rate()

Implement set_rate() for pfd.

Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Reviewed-by: Lukasz Majewski <lukma@denx.de>

clk: Port Linux common clock framework [CCF] for imx6q to U-boot (tag: v5.1.12)

This patch brings the files from Linux kernel (linux-stable/linux-5.1.y
SHA1: 5752b50477da)to provide clocks support as it is used on the Linux
kernel with Common Clock Framework [CCF] setup.

The directory structure has been preserved. The ported code only supports
reading information from PLL, MUX, Divider, etc and enabling/disabling
the clocks USDHCx/ECSPIx depending on used bus. Moreover, it is agnostic
to the alias numbering as the information about the clock is read from the
device tree.

One needs to pay attention to the comments indicating necessary for U-Boot's
driver model changes.

If needed, the code can be extended to support the "set" part of the clock
management.

Signed-off-by: Lukasz Majewski <lukma@denx.de>

dm: core: Require users of devres to include the header

At present devres.h is included in all files that include dm.h but few
make use of it. Also this pulls in linux/compat which adds several more
headers. Drop the automatic inclusion and require files to include devres
themselves. This provides a good indication of which files use devres.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Anatolij Gustschin <agust@denx.de>

clk: imx: pfd: add set_rate()

Implement set_rate() for pfd.

Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Reviewed-by: Lukasz Majewski <lukma@denx.de>

clk: Port Linux common clock framework [CCF] for imx6q to U-boot (tag: v5.1.12)

This patch brings the files from Linux kernel (linux-stable/linux-5.1.y
SHA1: 5752b50477da)to provide clocks support as it is used on the Linux
kernel with Common Clock Framework [CCF] setup.

The directory structure has been preserved. The ported code only supports
reading information from PLL, MUX, Divider, etc and enabling/disabling
the clocks USDHCx/ECSPIx depending on used bus. Moreover, it is agnostic
to the alias numbering as the information about the clock is read from the
device tree.

One needs to pay attention to the comments indicating necessary for U-Boot's
driver model changes.

If needed, the code can be extended to support the "set" part of the clock
management.

Signed-off-by: Lukasz Majewski <lukma@denx.de>

dm: core: Require users of devres to include the header

At present devres.h is included in all files that include dm.h but few
make use of it. Also this pulls in linux/compat which adds several more
headers. Drop the automatic inclusion and require files to include devres
themselves. This provides a good indication of which files use devres.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Anatolij Gustschin <agust@denx.de>

clk: imx: pfd: add set_rate()

Implement set_rate() for pfd.

Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Reviewed-by: Lukasz Majewski <lukma@denx.de>

clk: Port Linux common clock framework [CCF] for imx6q to U-boot (tag: v5.1.12)

This patch brings the files from Linux kernel (linux-stable/linux-5.1.y
SHA1: 5752b50477da)to provide clocks support as it is used on the Linux
kernel with Common Clock Framework [CCF] setup.

The directory structure has been preserved. The ported code only supports
reading information from PLL, MUX, Divider, etc and enabling/disabling
the clocks USDHCx/ECSPIx depending on used bus. Moreover, it is agnostic
to the alias numbering as the information about the clock is read from the
device tree.

One needs to pay attention to the comments indicating necessary for U-Boot's
driver model changes.

If needed, the code can be extended to support the "set" part of the clock
management.

Signed-off-by: Lukasz Majewski <lukma@denx.de>

dm: core: Require users of devres to include the header

At present devres.h is included in all files that include dm.h but few
make use of it. Also this pulls in linux/compat which adds several more
headers. Drop the automatic inclusion and require files to include devres
themselves. This provides a good indication of which files use devres.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Anatolij Gustschin <agust@denx.de>

clk: imx: pfd: add set_rate()

Implement set_rate() for pfd.

Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Reviewed-by: Lukasz Majewski <lukma@denx.de>

clk: Port Linux common clock framework [CCF] for imx6q to U-boot (tag: v5.1.12)

This patch brings the files from Linux kernel (linux-stable/linux-5.1.y
SHA1: 5752b50477da)to provide clocks support as it is used on the Linux
kernel with Common Clock Framework [CCF] setup.

The directory structure has been preserved. The ported code only supports
reading information from PLL, MUX, Divider, etc and enabling/disabling
the clocks USDHCx/ECSPIx depending on used bus. Moreover, it is agnostic
to the alias numbering as the information about the clock is read from the
device tree.

One needs to pay attention to the comments indicating necessary for U-Boot's
driver model changes.

If needed, the code can be extended to support the "set" part of the clock
management.

Signed-off-by: Lukasz Majewski <lukma@denx.de>

dm: core: Require users of devres to include the header

At present devres.h is included in all files that include dm.h but few
make use of it. Also this pulls in linux/compat which adds several more
headers. Drop the automatic inclusion and require files to include devres
themselves. This provides a good indication of which files use devres.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Anatolij Gustschin <agust@denx.de>

clk: imx: pfd: add set_rate()

Implement set_rate() for pfd.

Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Reviewed-by: Lukasz Majewski <lukma@denx.de>

clk: Port Linux common clock framework [CCF] for imx6q to U-boot (tag: v5.1.12)

This patch brings the files from Linux kernel (linux-stable/linux-5.1.y
SHA1: 5752b50477da)to provide clocks support as it is used on the Linux
kernel with Common Clock Framework [CCF] setup.

The directory structure has been preserved. The ported code only supports
reading information from PLL, MUX, Divider, etc and enabling/disabling
the clocks USDHCx/ECSPIx depending on used bus. Moreover, it is agnostic
to the alias numbering as the information about the clock is read from the
device tree.

One needs to pay attention to the comments indicating necessary for U-Boot's
driver model changes.

If needed, the code can be extended to support the "set" part of the clock
management.

Signed-off-by: Lukasz Majewski <lukma@denx.de>

dm: core: Require users of devres to include the header

At present devres.h is included in all files that include dm.h but few
make use of it. Also this pulls in linux/compat which adds several more
headers. Drop the automatic inclusion and require files to include devres
themselves. This provides a good indication of which files use devres.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Anatolij Gustschin <agust@denx.de>

clk: imx: pfd: add set_rate()

Implement set_rate() for pfd.

Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Reviewed-by: Lukasz Majewski <lukma@denx.de>

clk: Port Linux common clock framework [CCF] for imx6q to U-boot (tag: v5.1.12)

This patch brings the files from Linux kernel (linux-stable/linux-5.1.y
SHA1: 5752b50477da)to provide clocks support as it is used on the Linux
kernel with Common Clock Framework [CCF] setup.

The directory structure has been preserved. The ported code only supports
reading information from PLL, MUX, Divider, etc and enabling/disabling
the clocks USDHCx/ECSPIx depending on used bus. Moreover, it is agnostic
to the alias numbering as the information about the clock is read from the
device tree.

One needs to pay attention to the comments indicating necessary for U-Boot's
driver model changes.

If needed, the code can be extended to support the "set" part of the clock
management.

Signed-off-by: Lukasz Majewski <lukma@denx.de>

dm: core: Require users of devres to include the header

At present devres.h is included in all files that include dm.h but few
make use of it. Also this pulls in linux/compat which adds several more
headers. Drop the automatic inclusion and require files to include devres
themselves. This provides a good indication of which files use devres.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Anatolij Gustschin <agust@denx.de>

clk: imx: pfd: add set_rate()

Implement set_rate() for pfd.

Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Reviewed-by: Lukasz Majewski <lukma@denx.de>

clk: Port Linux common clock framework [CCF] for imx6q to U-boot (tag: v5.1.12)

This patch brings the files from Linux kernel (linux-stable/linux-5.1.y
SHA1: 5752b50477da)to provide clocks support as it is used on the Linux
kernel with Common Clock Framework [CCF] setup.

The directory structure has been preserved. The ported code only supports
reading information from PLL, MUX, Divider, etc and enabling/disabling
the clocks USDHCx/ECSPIx depending on used bus. Moreover, it is agnostic
to the alias numbering as the information about the clock is read from the
device tree.

One needs to pay attention to the comments indicating necessary for U-Boot's
driver model changes.

If needed, the code can be extended to support the "set" part of the clock
management.

Signed-off-by: Lukasz Majewski <lukma@denx.de>

dm: core: Require users of devres to include the header

At present devres.h is included in all files that include dm.h but few
make use of it. Also this pulls in linux/compat which adds several more
headers. Drop the automatic inclusion and require files to include devres
themselves. This provides a good indication of which files use devres.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Anatolij Gustschin <agust@denx.de>

clk: imx: pfd: add set_rate()

Implement set_rate() for pfd.

Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Reviewed-by: Lukasz Majewski <lukma@denx.de>

clk: Port Linux common clock framework [CCF] for imx6q to U-boot (tag: v5.1.12)

This patch brings the files from Linux kernel (linux-stable/linux-5.1.y
SHA1: 5752b50477da)to provide clocks support as it is used on the Linux
kernel with Common Clock Framework [CCF] setup.

The directory structure has been preserved. The ported code only supports
reading information from PLL, MUX, Divider, etc and enabling/disabling
the clocks USDHCx/ECSPIx depending on used bus. Moreover, it is agnostic
to the alias numbering as the information about the clock is read from the
device tree.

One needs to pay attention to the comments indicating necessary for U-Boot's
driver model changes.

If needed, the code can be extended to support the "set" part of the clock
management.

Signed-off-by: Lukasz Majewski <lukma@denx.de>

dm: core: Require users of devres to include the header

At present devres.h is included in all files that include dm.h but few
make use of it. Also this pulls in linux/compat which adds several more
headers. Drop the automatic inclusion and require files to include devres
themselves. This provides a good indication of which files use devres.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Anatolij Gustschin <agust@denx.de>

clk: imx: pfd: add set_rate()

Implement set_rate() for pfd.

Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Reviewed-by: Lukasz Majewski <lukma@denx.de>

clk: Port Linux common clock framework [CCF] for imx6q to U-boot (tag: v5.1.12)

This patch brings the files from Linux kernel (linux-stable/linux-5.1.y
SHA1: 5752b50477da)to provide clocks support as it is used on the Linux
kernel with Common Clock Framework [CCF] setup.

The directory structure has been preserved. The ported code only supports
reading information from PLL, MUX, Divider, etc and enabling/disabling
the clocks USDHCx/ECSPIx depending on used bus. Moreover, it is agnostic
to the alias numbering as the information about the clock is read from the
device tree.

One needs to pay attention to the comments indicating necessary for U-Boot's
driver model changes.

If needed, the code can be extended to support the "set" part of the clock
management.

Signed-off-by: Lukasz Majewski <lukma@denx.de>

dm: core: Require users of devres to include the header

At present devres.h is included in all files that include dm.h but few
make use of it. Also this pulls in linux/compat which adds several more
headers. Drop the automatic inclusion and require files to include devres
themselves. This provides a good indication of which files use devres.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Anatolij Gustschin <agust@denx.de>

clk: imx: pfd: add set_rate()

Implement set_rate() for pfd.

Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Reviewed-by: Lukasz Majewski <lukma@denx.de>

clk: Port Linux common clock framework [CCF] for imx6q to U-boot (tag: v5.1.12)

This patch brings the files from Linux kernel (linux-stable/linux-5.1.y
SHA1: 5752b50477da)to provide clocks support as it is used on the Linux
kernel with Common Clock Framework [CCF] setup.

The directory structure has been preserved. The ported code only supports
reading information from PLL, MUX, Divider, etc and enabling/disabling
the clocks USDHCx/ECSPIx depending on used bus. Moreover, it is agnostic
to the alias numbering as the information about the clock is read from the
device tree.

One needs to pay attention to the comments indicating necessary for U-Boot's
driver model changes.

If needed, the code can be extended to support the "set" part of the clock
management.

Signed-off-by: Lukasz Majewski <lukma@denx.de>

dm: core: Require users of devres to include the header

At present devres.h is included in all files that include dm.h but few
make use of it. Also this pulls in linux/compat which adds several more
headers. Drop the automatic inclusion and require files to include devres
themselves. This provides a good indication of which files use devres.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Anatolij Gustschin <agust@denx.de>

clk: imx: pfd: add set_rate()

Implement set_rate() for pfd.

Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Reviewed-by: Lukasz Majewski <lukma@denx.de>

clk: Port Linux common clock framework [CCF] for imx6q to U-boot (tag: v5.1.12)

This patch brings the files from Linux kernel (linux-stable/linux-5.1.y
SHA1: 5752b50477da)to provide clocks support as it is used on the Linux
kernel with Common Clock Framework [CCF] setup.

The directory structure has been preserved. The ported code only supports
reading information from PLL, MUX, Divider, etc and enabling/disabling
the clocks USDHCx/ECSPIx depending on used bus. Moreover, it is agnostic
to the alias numbering as the information about the clock is read from the
device tree.

One needs to pay attention to the comments indicating necessary for U-Boot's
driver model changes.

If needed, the code can be extended to support the "set" part of the clock
management.

Signed-off-by: Lukasz Majewski <lukma@denx.de>

dm: core: Require users of devres to include the header

At present devres.h is included in all files that include dm.h but few
make use of it. Also this pulls in linux/compat which adds several more
headers. Drop the automatic inclusion and require files to include devres
themselves. This provides a good indication of which files use devres.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Anatolij Gustschin <agust@denx.de>

clk: imx: pfd: add set_rate()

Implement set_rate() for pfd.

Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Reviewed-by: Lukasz Majewski <lukma@denx.de>

clk: Port Linux common clock framework [CCF] for imx6q to U-boot (tag: v5.1.12)

This patch brings the files from Linux kernel (linux-stable/linux-5.1.y
SHA1: 5752b50477da)to provide clocks support as it is used on the Linux
kernel with Common Clock Framework [CCF] setup.

The directory structure has been preserved. The ported code only supports
reading information from PLL, MUX, Divider, etc and enabling/disabling
the clocks USDHCx/ECSPIx depending on used bus. Moreover, it is agnostic
to the alias numbering as the information about the clock is read from the
device tree.

One needs to pay attention to the comments indicating necessary for U-Boot's
driver model changes.

If needed, the code can be extended to support the "set" part of the clock
management.

Signed-off-by: Lukasz Majewski <lukma@denx.de>

dm: core: Require users of devres to include the header

At present devres.h is included in all files that include dm.h but few
make use of it. Also this pulls in linux/compat which adds several more
headers. Drop the automatic inclusion and require files to include devres
themselves. This provides a good indication of which files use devres.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Anatolij Gustschin <agust@denx.de>

clk: imx: pfd: add set_rate()

Implement set_rate() for pfd.

Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Reviewed-by: Lukasz Majewski <lukma@denx.de>

clk: Port Linux common clock framework [CCF] for imx6q to U-boot (tag: v5.1.12)

This patch brings the files from Linux kernel (linux-stable/linux-5.1.y
SHA1: 5752b50477da)to provide clocks support as it is used on the Linux
kernel with Common Clock Framework [CCF] setup.

The directory structure has been preserved. The ported code only supports
reading information from PLL, MUX, Divider, etc and enabling/disabling
the clocks USDHCx/ECSPIx depending on used bus. Moreover, it is agnostic
to the alias numbering as the information about the clock is read from the
device tree.

One needs to pay attention to the comments indicating necessary for U-Boot's
driver model changes.

If needed, the code can be extended to support the "set" part of the clock
management.

Signed-off-by: Lukasz Majewski <lukma@denx.de>

dm: core: Require users of devres to include the header

At present devres.h is included in all files that include dm.h but few
make use of it. Also this pulls in linux/compat which adds several more
headers. Drop the automatic inclusion and require files to include devres
themselves. This provides a good indication of which files use devres.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Anatolij Gustschin <agust@denx.de>

clk: imx: pfd: add set_rate()

Implement set_rate() for pfd.

Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Reviewed-by: Lukasz Majewski <lukma@denx.de>

clk: Port Linux common clock framework [CCF] for imx6q to U-boot (tag: v5.1.12)

This patch brings the files from Linux kernel (linux-stable/linux-5.1.y
SHA1: 5752b50477da)to provide clocks support as it is used on the Linux
kernel with Common Clock Framework [CCF] setup.

The directory structure has been preserved. The ported code only supports
reading information from PLL, MUX, Divider, etc and enabling/disabling
the clocks USDHCx/ECSPIx depending on used bus. Moreover, it is agnostic
to the alias numbering as the information about the clock is read from the
device tree.

One needs to pay attention to the comments indicating necessary for U-Boot's
driver model changes.

If needed, the code can be extended to support the "set" part of the clock
management.

Signed-off-by: Lukasz Majewski <lukma@denx.de>

dm: core: Require users of devres to include the header

At present devres.h is included in all files that include dm.h but few
make use of it. Also this pulls in linux/compat which adds several more
headers. Drop the automatic inclusion and require files to include devres
themselves. This provides a good indication of which files use devres.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Anatolij Gustschin <agust@denx.de>

clk: imx: pfd: add set_rate()

Implement set_rate() for pfd.

Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Reviewed-by: Lukasz Majewski <lukma@denx.de>

clk: Port Linux common clock framework [CCF] for imx6q to U-boot (tag: v5.1.12)

This patch brings the files from Linux kernel (linux-stable/linux-5.1.y
SHA1: 5752b50477da)to provide clocks support as it is used on the Linux
kernel with Common Clock Framework [CCF] setup.

The directory structure has been preserved. The ported code only supports
reading information from PLL, MUX, Divider, etc and enabling/disabling
the clocks USDHCx/ECSPIx depending on used bus. Moreover, it is agnostic
to the alias numbering as the information about the clock is read from the
device tree.

One needs to pay attention to the comments indicating necessary for U-Boot's
driver model changes.

If needed, the code can be extended to support the "set" part of the clock
management.

Signed-off-by: Lukasz Majewski <lukma@denx.de>

dm: core: Require users of devres to include the header

At present devres.h is included in all files that include dm.h but few
make use of it. Also this pulls in linux/compat which adds several more
headers. Drop the automatic inclusion and require files to include devres
themselves. This provides a good indication of which files use devres.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Anatolij Gustschin <agust@denx.de>

clk: imx: pfd: add set_rate()

Implement set_rate() for pfd.

Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Reviewed-by: Lukasz Majewski <lukma@denx.de>

clk: Port Linux common clock framework [CCF] for imx6q to U-boot (tag: v5.1.12)

This patch brings the files from Linux kernel (linux-stable/linux-5.1.y
SHA1: 5752b50477da)to provide clocks support as it is used on the Linux
kernel with Common Clock Framework [CCF] setup.

The directory structure has been preserved. The ported code only supports
reading information from PLL, MUX, Divider, etc and enabling/disabling
the clocks USDHCx/ECSPIx depending on used bus. Moreover, it is agnostic
to the alias numbering as the information about the clock is read from the
device tree.

One needs to pay attention to the comments indicating necessary for U-Boot's
driver model changes.

If needed, the code can be extended to support the "set" part of the clock
management.

Signed-off-by: Lukasz Majewski <lukma@denx.de>

dm: core: Require users of devres to include the header

At present devres.h is included in all files that include dm.h but few
make use of it. Also this pulls in linux/compat which adds several more
headers. Drop the automatic inclusion and require files to include devres
themselves. This provides a good indication of which files use devres.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Anatolij Gustschin <agust@denx.de>

clk: imx: pfd: add set_rate()

Implement set_rate() for pfd.

Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Reviewed-by: Lukasz Majewski <lukma@denx.de>

clk: Port Linux common clock framework [CCF] for imx6q to U-boot (tag: v5.1.12)

This patch brings the files from Linux kernel (linux-stable/linux-5.1.y
SHA1: 5752b50477da)to provide clocks support as it is used on the Linux
kernel with Common Clock Framework [CCF] setup.

The directory structure has been preserved. The ported code only supports
reading information from PLL, MUX, Divider, etc and enabling/disabling
the clocks USDHCx/ECSPIx depending on used bus. Moreover, it is agnostic
to the alias numbering as the information about the clock is read from the
device tree.

One needs to pay attention to the comments indicating necessary for U-Boot's
driver model changes.

If needed, the code can be extended to support the "set" part of the clock
management.

Signed-off-by: Lukasz Majewski <lukma@denx.de>

dm: core: Require users of devres to include the header

At present devres.h is included in all files that include dm.h but few
make use of it. Also this pulls in linux/compat which adds several more
headers. Drop the automatic inclusion and require files to include devres
themselves. This provides a good indication of which files use devres.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Anatolij Gustschin <agust@denx.de>

clk: imx: pfd: add set_rate()

Implement set_rate() for pfd.

Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Reviewed-by: Lukasz Majewski <lukma@denx.de>

clk: Port Linux common clock framework [CCF] for imx6q to U-boot (tag: v5.1.12)

This patch brings the files from Linux kernel (linux-stable/linux-5.1.y
SHA1: 5752b50477da)to provide clocks support as it is used on the Linux
kernel with Common Clock Framework [CCF] setup.

The directory structure has been preserved. The ported code only supports
reading information from PLL, MUX, Divider, etc and enabling/disabling
the clocks USDHCx/ECSPIx depending on used bus. Moreover, it is agnostic
to the alias numbering as the information about the clock is read from the
device tree.

One needs to pay attention to the comments indicating necessary for U-Boot's
driver model changes.

If needed, the code can be extended to support the "set" part of the clock
management.

Signed-off-by: Lukasz Majewski <lukma@denx.de>

dm: core: Require users of devres to include the header

At present devres.h is included in all files that include dm.h but few
make use of it. Also this pulls in linux/compat which adds several more
headers. Drop the automatic inclusion and require files to include devres
themselves. This provides a good indication of which files use devres.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Anatolij Gustschin <agust@denx.de>

clk: imx: pfd: add set_rate()

Implement set_rate() for pfd.

Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Reviewed-by: Lukasz Majewski <lukma@denx.de>

clk: Port Linux common clock framework [CCF] for imx6q to U-boot (tag: v5.1.12)

This patch brings the files from Linux kernel (linux-stable/linux-5.1.y
SHA1: 5752b50477da)to provide clocks support as it is used on the Linux
kernel with Common Clock Framework [CCF] setup.

The directory structure has been preserved. The ported code only supports
reading information from PLL, MUX, Divider, etc and enabling/disabling
the clocks USDHCx/ECSPIx depending on used bus. Moreover, it is agnostic
to the alias numbering as the information about the clock is read from the
device tree.

One needs to pay attention to the comments indicating necessary for U-Boot's
driver model changes.

If needed, the code can be extended to support the "set" part of the clock
management.

Signed-off-by: Lukasz Majewski <lukma@denx.de>

dm: core: Require users of devres to include the header

At present devres.h is included in all files that include dm.h but few
make use of it. Also this pulls in linux/compat which adds several more
headers. Drop the automatic inclusion and require files to include devres
themselves. This provides a good indication of which files use devres.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Anatolij Gustschin <agust@denx.de>

clk: imx: pfd: add set_rate()

Implement set_rate() for pfd.

Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Reviewed-by: Lukasz Majewski <lukma@denx.de>

clk: Port Linux common clock framework [CCF] for imx6q to U-boot (tag: v5.1.12)

This patch brings the files from Linux kernel (linux-stable/linux-5.1.y
SHA1: 5752b50477da)to provide clocks support as it is used on the Linux
kernel with Common Clock Framework [CCF] setup.

The directory structure has been preserved. The ported code only supports
reading information from PLL, MUX, Divider, etc and enabling/disabling
the clocks USDHCx/ECSPIx depending on used bus. Moreover, it is agnostic
to the alias numbering as the information about the clock is read from the
device tree.

One needs to pay attention to the comments indicating necessary for U-Boot's
driver model changes.

If needed, the code can be extended to support the "set" part of the clock
management.

Signed-off-by: Lukasz Majewski <lukma@denx.de>

dm: core: Require users of devres to include the header

At present devres.h is included in all files that include dm.h but few
make use of it. Also this pulls in linux/compat which adds several more
headers. Drop the automatic inclusion and require files to include devres
themselves. This provides a good indication of which files use devres.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Anatolij Gustschin <agust@denx.de>

clk: imx: pfd: add set_rate()

Implement set_rate() for pfd.

Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Reviewed-by: Lukasz Majewski <lukma@denx.de>

clk: Port Linux common clock framework [CCF] for imx6q to U-boot (tag: v5.1.12)

This patch brings the files from Linux kernel (linux-stable/linux-5.1.y
SHA1: 5752b50477da)to provide clocks support as it is used on the Linux
kernel with Common Clock Framework [CCF] setup.

The directory structure has been preserved. The ported code only supports
reading information from PLL, MUX, Divider, etc and enabling/disabling
the clocks USDHCx/ECSPIx depending on used bus. Moreover, it is agnostic
to the alias numbering as the information about the clock is read from the
device tree.

One needs to pay attention to the comments indicating necessary for U-Boot's
driver model changes.

If needed, the code can be extended to support the "set" part of the clock
management.

Signed-off-by: Lukasz Majewski <lukma@denx.de>

dm: core: Require users of devres to include the header

At present devres.h is included in all files that include dm.h but few
make use of it. Also this pulls in linux/compat which adds several more
headers. Drop the automatic inclusion and require files to include devres
themselves. This provides a good indication of which files use devres.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Anatolij Gustschin <agust@denx.de>

clk: imx: pfd: add set_rate()

Implement set_rate() for pfd.

Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Reviewed-by: Lukasz Majewski <lukma@denx.de>

clk: Port Linux common clock framework [CCF] for imx6q to U-boot (tag: v5.1.12)

This patch brings the files from Linux kernel (linux-stable/linux-5.1.y
SHA1: 5752b50477da)to provide clocks support as it is used on the Linux
kernel with Common Clock Framework [CCF] setup.

The directory structure has been preserved. The ported code only supports
reading information from PLL, MUX, Divider, etc and enabling/disabling
the clocks USDHCx/ECSPIx depending on used bus. Moreover, it is agnostic
to the alias numbering as the information about the clock is read from the
device tree.

One needs to pay attention to the comments indicating necessary for U-Boot's
driver model changes.

If needed, the code can be extended to support the "set" part of the clock
management.

Signed-off-by: Lukasz Majewski <lukma@denx.de>

dm: core: Require users of devres to include the header

At present devres.h is included in all files that include dm.h but few
make use of it. Also this pulls in linux/compat which adds several more
headers. Drop the automatic inclusion and require files to include devres
themselves. This provides a good indication of which files use devres.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Anatolij Gustschin <agust@denx.de>

clk: imx: pfd: add set_rate()

Implement set_rate() for pfd.

Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Reviewed-by: Lukasz Majewski <lukma@denx.de>

clk: Port Linux common clock framework [CCF] for imx6q to U-boot (tag: v5.1.12)

This patch brings the files from Linux kernel (linux-stable/linux-5.1.y
SHA1: 5752b50477da)to provide clocks support as it is used on the Linux
kernel with Common Clock Framework [CCF] setup.

The directory structure has been preserved. The ported code only supports
reading information from PLL, MUX, Divider, etc and enabling/disabling
the clocks USDHCx/ECSPIx depending on used bus. Moreover, it is agnostic
to the alias numbering as the information about the clock is read from the
device tree.

One needs to pay attention to the comments indicating necessary for U-Boot's
driver model changes.

If needed, the code can be extended to support the "set" part of the clock
management.

Signed-off-by: Lukasz Majewski <lukma@denx.de>

dm: core: Require users of devres to include the header

At present devres.h is included in all files that include dm.h but few
make use of it. Also this pulls in linux/compat which adds several more
headers. Drop the automatic inclusion and require files to include devres
themselves. This provides a good indication of which files use devres.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Anatolij Gustschin <agust@denx.de>

clk: imx: pfd: add set_rate()

Implement set_rate() for pfd.

Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Reviewed-by: Lukasz Majewski <lukma@denx.de>

clk: Port Linux common clock framework [CCF] for imx6q to U-boot (tag: v5.1.12)

This patch brings the files from Linux kernel (linux-stable/linux-5.1.y
SHA1: 5752b50477da)to provide clocks support as it is used on the Linux
kernel with Common Clock Framework [CCF] setup.

The directory structure has been preserved. The ported code only supports
reading information from PLL, MUX, Divider, etc and enabling/disabling
the clocks USDHCx/ECSPIx depending on used bus. Moreover, it is agnostic
to the alias numbering as the information about the clock is read from the
device tree.

One needs to pay attention to the comments indicating necessary for U-Boot's
driver model changes.

If needed, the code can be extended to support the "set" part of the clock
management.

Signed-off-by: Lukasz Majewski <lukma@denx.de>

dm: core: Require users of devres to include the header

At present devres.h is included in all files that include dm.h but few
make use of it. Also this pulls in linux/compat which adds several more
headers. Drop the automatic inclusion and require files to include devres
themselves. This provides a good indication of which files use devres.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Anatolij Gustschin <agust@denx.de>

clk: imx: pfd: add set_rate()

Implement set_rate() for pfd.

Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Reviewed-by: Lukasz Majewski <lukma@denx.de>

clk: Port Linux common clock framework [CCF] for imx6q to U-boot (tag: v5.1.12)

This patch brings the files from Linux kernel (linux-stable/linux-5.1.y
SHA1: 5752b50477da)to provide clocks support as it is used on the Linux
kernel with Common Clock Framework [CCF] setup.

The directory structure has been preserved. The ported code only supports
reading information from PLL, MUX, Divider, etc and enabling/disabling
the clocks USDHCx/ECSPIx depending on used bus. Moreover, it is agnostic
to the alias numbering as the information about the clock is read from the
device tree.

One needs to pay attention to the comments indicating necessary for U-Boot's
driver model changes.

If needed, the code can be extended to support the "set" part of the clock
management.

Signed-off-by: Lukasz Majewski <lukma@denx.de>

dm: core: Require users of devres to include the header

At present devres.h is included in all files that include dm.h but few
make use of it. Also this pulls in linux/compat which adds several more
headers. Drop the automatic inclusion and require files to include devres
themselves. This provides a good indication of which files use devres.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Anatolij Gustschin <agust@denx.de>

clk: imx: pfd: add set_rate()

Implement set_rate() for pfd.

Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Reviewed-by: Lukasz Majewski <lukma@denx.de>

clk: Port Linux common clock framework [CCF] for imx6q to U-boot (tag: v5.1.12)

This patch brings the files from Linux kernel (linux-stable/linux-5.1.y
SHA1: 5752b50477da)to provide clocks support as it is used on the Linux
kernel with Common Clock Framework [CCF] setup.

The directory structure has been preserved. The ported code only supports
reading information from PLL, MUX, Divider, etc and enabling/disabling
the clocks USDHCx/ECSPIx depending on used bus. Moreover, it is agnostic
to the alias numbering as the information about the clock is read from the
device tree.

One needs to pay attention to the comments indicating necessary for U-Boot's
driver model changes.

If needed, the code can be extended to support the "set" part of the clock
management.

Signed-off-by: Lukasz Majewski <lukma@denx.de>

dm: core: Require users of devres to include the header

At present devres.h is included in all files that include dm.h but few
make use of it. Also this pulls in linux/compat which adds several more
headers. Drop the automatic inclusion and require files to include devres
themselves. This provides a good indication of which files use devres.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Anatolij Gustschin <agust@denx.de>

clk: imx: pfd: add set_rate()

Implement set_rate() for pfd.

Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Reviewed-by: Lukasz Majewski <lukma@denx.de>

clk: Port Linux common clock framework [CCF] for imx6q to U-boot (tag: v5.1.12)

This patch brings the files from Linux kernel (linux-stable/linux-5.1.y
SHA1: 5752b50477da)to provide clocks support as it is used on the Linux
kernel with Common Clock Framework [CCF] setup.

The directory structure has been preserved. The ported code only supports
reading information from PLL, MUX, Divider, etc and enabling/disabling
the clocks USDHCx/ECSPIx depending on used bus. Moreover, it is agnostic
to the alias numbering as the information about the clock is read from the
device tree.

One needs to pay attention to the comments indicating necessary for U-Boot's
driver model changes.

If needed, the code can be extended to support the "set" part of the clock
management.

Signed-off-by: Lukasz Majewski <lukma@denx.de>

dm: core: Require users of devres to include the header

At present devres.h is included in all files that include dm.h but few
make use of it. Also this pulls in linux/compat which adds several more
headers. Drop the automatic inclusion and require files to include devres
themselves. This provides a good indication of which files use devres.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Anatolij Gustschin <agust@denx.de>

clk: imx: pfd: add set_rate()

Implement set_rate() for pfd.

Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Reviewed-by: Lukasz Majewski <lukma@denx.de>

clk: Port Linux common clock framework [CCF] for imx6q to U-boot (tag: v5.1.12)

This patch brings the files from Linux kernel (linux-stable/linux-5.1.y
SHA1: 5752b50477da)to provide clocks support as it is used on the Linux
kernel with Common Clock Framework [CCF] setup.

The directory structure has been preserved. The ported code only supports
reading information from PLL, MUX, Divider, etc and enabling/disabling
the clocks USDHCx/ECSPIx depending on used bus. Moreover, it is agnostic
to the alias numbering as the information about the clock is read from the
device tree.

One needs to pay attention to the comments indicating necessary for U-Boot's
driver model changes.

If needed, the code can be extended to support the "set" part of the clock
management.

Signed-off-by: Lukasz Majewski <lukma@denx.de>

dm: core: Require users of devres to include the header

At present devres.h is included in all files that include dm.h but few
make use of it. Also this pulls in linux/compat which adds several more
headers. Drop the automatic inclusion and require files to include devres
themselves. This provides a good indication of which files use devres.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Anatolij Gustschin <agust@denx.de>

clk: imx: pfd: add set_rate()

Implement set_rate() for pfd.

Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Reviewed-by: Lukasz Majewski <lukma@denx.de>

clk: Port Linux common clock framework [CCF] for imx6q to U-boot (tag: v5.1.12)

This patch brings the files from Linux kernel (linux-stable/linux-5.1.y
SHA1: 5752b50477da)to provide clocks support as it is used on the Linux
kernel with Common Clock Framework [CCF] setup.

The directory structure has been preserved. The ported code only supports
reading information from PLL, MUX, Divider, etc and enabling/disabling
the clocks USDHCx/ECSPIx depending on used bus. Moreover, it is agnostic
to the alias numbering as the information about the clock is read from the
device tree.

One needs to pay attention to the comments indicating necessary for U-Boot's
driver model changes.

If needed, the code can be extended to support the "set" part of the clock
management.

Signed-off-by: Lukasz Majewski <lukma@denx.de>

dm: core: Require users of devres to include the header

At present devres.h is included in all files that include dm.h but few
make use of it. Also this pulls in linux/compat which adds several more
headers. Drop the automatic inclusion and require files to include devres
themselves. This provides a good indication of which files use devres.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Anatolij Gustschin <agust@denx.de>

clk: imx: pfd: add set_rate()

Implement set_rate() for pfd.

Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Reviewed-by: Lukasz Majewski <lukma@denx.de>

clk: Port Linux common clock framework [CCF] for imx6q to U-boot (tag: v5.1.12)

This patch brings the files from Linux kernel (linux-stable/linux-5.1.y
SHA1: 5752b50477da)to provide clocks support as it is used on the Linux
kernel with Common Clock Framework [CCF] setup.

The directory structure has been preserved. The ported code only supports
reading information from PLL, MUX, Divider, etc and enabling/disabling
the clocks USDHCx/ECSPIx depending on used bus. Moreover, it is agnostic
to the alias numbering as the information about the clock is read from the
device tree.

One needs to pay attention to the comments indicating necessary for U-Boot's
driver model changes.

If needed, the code can be extended to support the "set" part of the clock
management.

Signed-off-by: Lukasz Majewski <lukma@denx.de>

dm: core: Require users of devres to include the header

At present devres.h is included in all files that include dm.h but few
make use of it. Also this pulls in linux/compat which adds several more
headers. Drop the automatic inclusion and require files to include devres
themselves. This provides a good indication of which files use devres.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Anatolij Gustschin <agust@denx.de>

clk: imx: pfd: add set_rate()

Implement set_rate() for pfd.

Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Reviewed-by: Lukasz Majewski <lukma@denx.de>

clk: Port Linux common clock framework [CCF] for imx6q to U-boot (tag: v5.1.12)

This patch brings the files from Linux kernel (linux-stable/linux-5.1.y
SHA1: 5752b50477da)to provide clocks support as it is used on the Linux
kernel with Common Clock Framework [CCF] setup.

The directory structure has been preserved. The ported code only supports
reading information from PLL, MUX, Divider, etc and enabling/disabling
the clocks USDHCx/ECSPIx depending on used bus. Moreover, it is agnostic
to the alias numbering as the information about the clock is read from the
device tree.

One needs to pay attention to the comments indicating necessary for U-Boot's
driver model changes.

If needed, the code can be extended to support the "set" part of the clock
management.

Signed-off-by: Lukasz Majewski <lukma@denx.de>

dm: core: Require users of devres to include the header

At present devres.h is included in all files that include dm.h but few
make use of it. Also this pulls in linux/compat which adds several more
headers. Drop the automatic inclusion and require files to include devres
themselves. This provides a good indication of which files use devres.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Anatolij Gustschin <agust@denx.de>

clk: imx: pfd: add set_rate()

Implement set_rate() for pfd.

Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Reviewed-by: Lukasz Majewski <lukma@denx.de>

clk: Port Linux common clock framework [CCF] for imx6q to U-boot (tag: v5.1.12)

This patch brings the files from Linux kernel (linux-stable/linux-5.1.y
SHA1: 5752b50477da)to provide clocks support as it is used on the Linux
kernel with Common Clock Framework [CCF] setup.

The directory structure has been preserved. The ported code only supports
reading information from PLL, MUX, Divider, etc and enabling/disabling
the clocks USDHCx/ECSPIx depending on used bus. Moreover, it is agnostic
to the alias numbering as the information about the clock is read from the
device tree.

One needs to pay attention to the comments indicating necessary for U-Boot's
driver model changes.

If needed, the code can be extended to support the "set" part of the clock
management.

Signed-off-by: Lukasz Majewski <lukma@denx.de>

dm: core: Require users of devres to include the header

At present devres.h is included in all files that include dm.h but few
make use of it. Also this pulls in linux/compat which adds several more
headers. Drop the automatic inclusion and require files to include devres
themselves. This provides a good indication of which files use devres.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Anatolij Gustschin <agust@denx.de>

clk: imx: pfd: add set_rate()

Implement set_rate() for pfd.

Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Reviewed-by: Lukasz Majewski <lukma@denx.de>

clk: Port Linux common clock framework [CCF] for imx6q to U-boot (tag: v5.1.12)

This patch brings the files from Linux kernel (linux-stable/linux-5.1.y
SHA1: 5752b50477da)to provide clocks support as it is used on the Linux
kernel with Common Clock Framework [CCF] setup.

The directory structure has been preserved. The ported code only supports
reading information from PLL, MUX, Divider, etc and enabling/disabling
the clocks USDHCx/ECSPIx depending on used bus. Moreover, it is agnostic
to the alias numbering as the information about the clock is read from the
device tree.

One needs to pay attention to the comments indicating necessary for U-Boot's
driver model changes.

If needed, the code can be extended to support the "set" part of the clock
management.

Signed-off-by: Lukasz Majewski <lukma@denx.de>

dm: core: Require users of devres to include the header

At present devres.h is included in all files that include dm.h but few
make use of it. Also this pulls in linux/compat which adds several more
headers. Drop the automatic inclusion and require files to include devres
themselves. This provides a good indication of which files use devres.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Anatolij Gustschin <agust@denx.de>

clk: imx: pfd: add set_rate()

Implement set_rate() for pfd.

Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Reviewed-by: Lukasz Majewski <lukma@denx.de>

clk: Port Linux common clock framework [CCF] for imx6q to U-boot (tag: v5.1.12)

This patch brings the files from Linux kernel (linux-stable/linux-5.1.y
SHA1: 5752b50477da)to provide clocks support as it is used on the Linux
kernel with Common Clock Framework [CCF] setup.

The directory structure has been preserved. The ported code only supports
reading information from PLL, MUX, Divider, etc and enabling/disabling
the clocks USDHCx/ECSPIx depending on used bus. Moreover, it is agnostic
to the alias numbering as the information about the clock is read from the
device tree.

One needs to pay attention to the comments indicating necessary for U-Boot's
driver model changes.

If needed, the code can be extended to support the "set" part of the clock
management.

Signed-off-by: Lukasz Majewski <lukma@denx.de>

dm: core: Require users of devres to include the header

At present devres.h is included in all files that include dm.h but few
make use of it. Also this pulls in linux/compat which adds several more
headers. Drop the automatic inclusion and require files to include devres
themselves. This provides a good indication of which files use devres.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Anatolij Gustschin <agust@denx.de>

clk: imx: pfd: add set_rate()

Implement set_rate() for pfd.

Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Reviewed-by: Lukasz Majewski <lukma@denx.de>

clk: Port Linux common clock framework [CCF] for imx6q to U-boot (tag: v5.1.12)

This patch brings the files from Linux kernel (linux-stable/linux-5.1.y
SHA1: 5752b50477da)to provide clocks support as it is used on the Linux
kernel with Common Clock Framework [CCF] setup.

The directory structure has been preserved. The ported code only supports
reading information from PLL, MUX, Divider, etc and enabling/disabling
the clocks USDHCx/ECSPIx depending on used bus. Moreover, it is agnostic
to the alias numbering as the information about the clock is read from the
device tree.

One needs to pay attention to the comments indicating necessary for U-Boot's
driver model changes.

If needed, the code can be extended to support the "set" part of the clock
management.

Signed-off-by: Lukasz Majewski <lukma@denx.de>

dm: core: Require users of devres to include the header

At present devres.h is included in all files that include dm.h but few
make use of it. Also this pulls in linux/compat which adds several more
headers. Drop the automatic inclusion and require files to include devres
themselves. This provides a good indication of which files use devres.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Anatolij Gustschin <agust@denx.de>

clk: imx: pfd: add set_rate()

Implement set_rate() for pfd.

Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Reviewed-by: Lukasz Majewski <lukma@denx.de>

clk: Port Linux common clock framework [CCF] for imx6q to U-boot (tag: v5.1.12)

This patch brings the files from Linux kernel (linux-stable/linux-5.1.y
SHA1: 5752b50477da)to provide clocks support as it is used on the Linux
kernel with Common Clock Framework [CCF] setup.

The directory structure has been preserved. The ported code only supports
reading information from PLL, MUX, Divider, etc and enabling/disabling
the clocks USDHCx/ECSPIx depending on used bus. Moreover, it is agnostic
to the alias numbering as the information about the clock is read from the
device tree.

One needs to pay attention to the comments indicating necessary for U-Boot's
driver model changes.

If needed, the code can be extended to support the "set" part of the clock
management.

Signed-off-by: Lukasz Majewski <lukma@denx.de>

dm: core: Require users of devres to include the header

At present devres.h is included in all files that include dm.h but few
make use of it. Also this pulls in linux/compat which adds several more
headers. Drop the automatic inclusion and require files to include devres
themselves. This provides a good indication of which files use devres.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Anatolij Gustschin <agust@denx.de>

clk: imx: pfd: add set_rate()

Implement set_rate() for pfd.

Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Reviewed-by: Lukasz Majewski <lukma@denx.de>

clk: Port Linux common clock framework [CCF] for imx6q to U-boot (tag: v5.1.12)

This patch brings the files from Linux kernel (linux-stable/linux-5.1.y
SHA1: 5752b50477da)to provide clocks support as it is used on the Linux
kernel with Common Clock Framework [CCF] setup.

The directory structure has been preserved. The ported code only supports
reading information from PLL, MUX, Divider, etc and enabling/disabling
the clocks USDHCx/ECSPIx depending on used bus. Moreover, it is agnostic
to the alias numbering as the information about the clock is read from the
device tree.

One needs to pay attention to the comments indicating necessary for U-Boot's
driver model changes.

If needed, the code can be extended to support the "set" part of the clock
management.

Signed-off-by: Lukasz Majewski <lukma@denx.de>

dm: core: Require users of devres to include the header

At present devres.h is included in all files that include dm.h but few
make use of it. Also this pulls in linux/compat which adds several more
headers. Drop the automatic inclusion and require files to include devres
themselves. This provides a good indication of which files use devres.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Anatolij Gustschin <agust@denx.de>

clk: imx: pfd: add set_rate()

Implement set_rate() for pfd.

Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Reviewed-by: Lukasz Majewski <lukma@denx.de>

clk: Port Linux common clock framework [CCF] for imx6q to U-boot (tag: v5.1.12)

This patch brings the files from Linux kernel (linux-stable/linux-5.1.y
SHA1: 5752b50477da)to provide clocks support as it is used on the Linux
kernel with Common Clock Framework [CCF] setup.

The directory structure has been preserved. The ported code only supports
reading information from PLL, MUX, Divider, etc and enabling/disabling
the clocks USDHCx/ECSPIx depending on used bus. Moreover, it is agnostic
to the alias numbering as the information about the clock is read from the
device tree.

One needs to pay attention to the comments indicating necessary for U-Boot's
driver model changes.

If needed, the code can be extended to support the "set" part of the clock
management.

Signed-off-by: Lukasz Majewski <lukma@denx.de>

dm: core: Require users of devres to include the header

At present devres.h is included in all files that include dm.h but few
make use of it. Also this pulls in linux/compat which adds several more
headers. Drop the automatic inclusion and require files to include devres
themselves. This provides a good indication of which files use devres.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Anatolij Gustschin <agust@denx.de>

clk: imx: pfd: add set_rate()

Implement set_rate() for pfd.

Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Reviewed-by: Lukasz Majewski <lukma@denx.de>

clk: Port Linux common clock framework [CCF] for imx6q to U-boot (tag: v5.1.12)

This patch brings the files from Linux kernel (linux-stable/linux-5.1.y
SHA1: 5752b50477da)to provide clocks support as it is used on the Linux
kernel with Common Clock Framework [CCF] setup.

The directory structure has been preserved. The ported code only supports
reading information from PLL, MUX, Divider, etc and enabling/disabling
the clocks USDHCx/ECSPIx depending on used bus. Moreover, it is agnostic
to the alias numbering as the information about the clock is read from the
device tree.

One needs to pay attention to the comments indicating necessary for U-Boot's
driver model changes.

If needed, the code can be extended to support the "set" part of the clock
management.

Signed-off-by: Lukasz Majewski <lukma@denx.de>

dm: core: Require users of devres to include the header

At present devres.h is included in all files that include dm.h but few
make use of it. Also this pulls in linux/compat which adds several more
headers. Drop the automatic inclusion and require files to include devres
themselves. This provides a good indication of which files use devres.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Anatolij Gustschin <agust@denx.de>

clk: imx: pfd: add set_rate()

Implement set_rate() for pfd.

Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Reviewed-by: Lukasz Majewski <lukma@denx.de>

clk: Port Linux common clock framework [CCF] for imx6q to U-boot (tag: v5.1.12)

This patch brings the files from Linux kernel (linux-stable/linux-5.1.y
SHA1: 5752b50477da)to provide clocks support as it is used on the Linux
kernel with Common Clock Framework [CCF] setup.

The directory structure has been preserved. The ported code only supports
reading information from PLL, MUX, Divider, etc and enabling/disabling
the clocks USDHCx/ECSPIx depending on used bus. Moreover, it is agnostic
to the alias numbering as the information about the clock is read from the
device tree.

One needs to pay attention to the comments indicating necessary for U-Boot's
driver model changes.

If needed, the code can be extended to support the "set" part of the clock
management.

Signed-off-by: Lukasz Majewski <lukma@denx.de>

dm: core: Require users of devres to include the header

At present devres.h is included in all files that include dm.h but few
make use of it. Also this pulls in linux/compat which adds several more
headers. Drop the automatic inclusion and require files to include devres
themselves. This provides a good indication of which files use devres.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Anatolij Gustschin <agust@denx.de>

clk: imx: pfd: add set_rate()

Implement set_rate() for pfd.

Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Reviewed-by: Lukasz Majewski <lukma@denx.de>

clk: Port Linux common clock framework [CCF] for imx6q to U-boot (tag: v5.1.12)

This patch brings the files from Linux kernel (linux-stable/linux-5.1.y
SHA1: 5752b50477da)to provide clocks support as it is used on the Linux
kernel with Common Clock Framework [CCF] setup.

The directory structure has been preserved. The ported code only supports
reading information from PLL, MUX, Divider, etc and enabling/disabling
the clocks USDHCx/ECSPIx depending on used bus. Moreover, it is agnostic
to the alias numbering as the information about the clock is read from the
device tree.

One needs to pay attention to the comments indicating necessary for U-Boot's
driver model changes.

If needed, the code can be extended to support the "set" part of the clock
management.

Signed-off-by: Lukasz Majewski <lukma@denx.de>

dm: core: Require users of devres to include the header

At present devres.h is included in all files that include dm.h but few
make use of it. Also this pulls in linux/compat which adds several more
headers. Drop the automatic inclusion and require files to include devres
themselves. This provides a good indication of which files use devres.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Anatolij Gustschin <agust@denx.de>

clk: imx: pfd: add set_rate()

Implement set_rate() for pfd.

Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Reviewed-by: Lukasz Majewski <lukma@denx.de>

clk: Port Linux common clock framework [CCF] for imx6q to U-boot (tag: v5.1.12)

This patch brings the files from Linux kernel (linux-stable/linux-5.1.y
SHA1: 5752b50477da)to provide clocks support as it is used on the Linux
kernel with Common Clock Framework [CCF] setup.

The directory structure has been preserved. The ported code only supports
reading information from PLL, MUX, Divider, etc and enabling/disabling
the clocks USDHCx/ECSPIx depending on used bus. Moreover, it is agnostic
to the alias numbering as the information about the clock is read from the
device tree.

One needs to pay attention to the comments indicating necessary for U-Boot's
driver model changes.

If needed, the code can be extended to support the "set" part of the clock
management.

Signed-off-by: Lukasz Majewski <lukma@denx.de>

dm: core: Require users of devres to include the header

At present devres.h is included in all files that include dm.h but few
make use of it. Also this pulls in linux/compat which adds several more
headers. Drop the automatic inclusion and require files to include devres
themselves. This provides a good indication of which files use devres.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Anatolij Gustschin <agust@denx.de>

clk: imx: pfd: add set_rate()

Implement set_rate() for pfd.

Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Reviewed-by: Lukasz Majewski <lukma@denx.de>

clk: Port Linux common clock framework [CCF] for imx6q to U-boot (tag: v5.1.12)

This patch brings the files from Linux kernel (linux-stable/linux-5.1.y
SHA1: 5752b50477da)to provide clocks support as it is used on the Linux
kernel with Common Clock Framework [CCF] setup.

The directory structure has been preserved. The ported code only supports
reading information from PLL, MUX, Divider, etc and enabling/disabling
the clocks USDHCx/ECSPIx depending on used bus. Moreover, it is agnostic
to the alias numbering as the information about the clock is read from the
device tree.

One needs to pay attention to the comments indicating necessary for U-Boot's
driver model changes.

If needed, the code can be extended to support the "set" part of the clock
management.

Signed-off-by: Lukasz Majewski <lukma@denx.de>

dm: core: Require users of devres to include the header

At present devres.h is included in all files that include dm.h but few
make use of it. Also this pulls in linux/compat which adds several more
headers. Drop the automatic inclusion and require files to include devres
themselves. This provides a good indication of which files use devres.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Anatolij Gustschin <agust@denx.de>

clk: imx: pfd: add set_rate()

Implement set_rate() for pfd.

Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Reviewed-by: Lukasz Majewski <lukma@denx.de>

clk: Port Linux common clock framework [CCF] for imx6q to U-boot (tag: v5.1.12)

This patch brings the files from Linux kernel (linux-stable/linux-5.1.y
SHA1: 5752b50477da)to provide clocks support as it is used on the Linux
kernel with Common Clock Framework [CCF] setup.

The directory structure has been preserved. The ported code only supports
reading information from PLL, MUX, Divider, etc and enabling/disabling
the clocks USDHCx/ECSPIx depending on used bus. Moreover, it is agnostic
to the alias numbering as the information about the clock is read from the
device tree.

One needs to pay attention to the comments indicating necessary for U-Boot's
driver model changes.

If needed, the code can be extended to support the "set" part of the clock
management.

Signed-off-by: Lukasz Majewski <lukma@denx.de>

dm: core: Require users of devres to include the header

At present devres.h is included in all files that include dm.h but few
make use of it. Also this pulls in linux/compat which adds several more
headers. Drop the automatic inclusion and require files to include devres
themselves. This provides a good indication of which files use devres.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Anatolij Gustschin <agust@denx.de>

clk: imx: pfd: add set_rate()

Implement set_rate() for pfd.

Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Reviewed-by: Lukasz Majewski <lukma@denx.de>

clk: Port Linux common clock framework [CCF] for imx6q to U-boot (tag: v5.1.12)

This patch brings the files from Linux kernel (linux-stable/linux-5.1.y
SHA1: 5752b50477da)to provide clocks support as it is used on the Linux
kernel with Common Clock Framework [CCF] setup.

The directory structure has been preserved. The ported code only supports
reading information from PLL, MUX, Divider, etc and enabling/disabling
the clocks USDHCx/ECSPIx depending on used bus. Moreover, it is agnostic
to the alias numbering as the information about the clock is read from the
device tree.

One needs to pay attention to the comments indicating necessary for U-Boot's
driver model changes.

If needed, the code can be extended to support the "set" part of the clock
management.

Signed-off-by: Lukasz Majewski <lukma@denx.de>

dm: core: Require users of devres to include the header

At present devres.h is included in all files that include dm.h but few
make use of it. Also this pulls in linux/compat which adds several more
headers. Drop the automatic inclusion and require files to include devres
themselves. This provides a good indication of which files use devres.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Anatolij Gustschin <agust@denx.de>

clk: imx: pfd: add set_rate()

Implement set_rate() for pfd.

Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Reviewed-by: Lukasz Majewski <lukma@denx.de>

clk: Port Linux common clock framework [CCF] for imx6q to U-boot (tag: v5.1.12)

This patch brings the files from Linux kernel (linux-stable/linux-5.1.y
SHA1: 5752b50477da)to provide clocks support as it is used on the Linux
kernel with Common Clock Framework [CCF] setup.

The directory structure has been preserved. The ported code only supports
reading information from PLL, MUX, Divider, etc and enabling/disabling
the clocks USDHCx/ECSPIx depending on used bus. Moreover, it is agnostic
to the alias numbering as the information about the clock is read from the
device tree.

One needs to pay attention to the comments indicating necessary for U-Boot's
driver model changes.

If needed, the code can be extended to support the "set" part of the clock
management.

Signed-off-by: Lukasz Majewski <lukma@denx.de>

dm: core: Require users of devres to include the header

At present devres.h is included in all files that include dm.h but few
make use of it. Also this pulls in linux/compat which adds several more
headers. Drop the automatic inclusion and require files to include devres
themselves. This provides a good indication of which files use devres.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Anatolij Gustschin <agust@denx.de>

clk: imx: pfd: add set_rate()

Implement set_rate() for pfd.

Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Reviewed-by: Lukasz Majewski <lukma@denx.de>

clk: Port Linux common clock framework [CCF] for imx6q to U-boot (tag: v5.1.12)

This patch brings the files from Linux kernel (linux-stable/linux-5.1.y
SHA1: 5752b50477da)to provide clocks support as it is used on the Linux
kernel with Common Clock Framework [CCF] setup.

The directory structure has been preserved. The ported code only supports
reading information from PLL, MUX, Divider, etc and enabling/disabling
the clocks USDHCx/ECSPIx depending on used bus. Moreover, it is agnostic
to the alias numbering as the information about the clock is read from the
device tree.

One needs to pay attention to the comments indicating necessary for U-Boot's
driver model changes.

If needed, the code can be extended to support the "set" part of the clock
management.

Signed-off-by: Lukasz Majewski <lukma@denx.de>

dm: core: Require users of devres to include the header

At present devres.h is included in all files that include dm.h but few
make use of it. Also this pulls in linux/compat which adds several more
headers. Drop the automatic inclusion and require files to include devres
themselves. This provides a good indication of which files use devres.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Anatolij Gustschin <agust@denx.de>

clk: imx: pfd: add set_rate()

Implement set_rate() for pfd.

Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Reviewed-by: Lukasz Majewski <lukma@denx.de>

clk: Port Linux common clock framework [CCF] for imx6q to U-boot (tag: v5.1.12)

This patch brings the files from Linux kernel (linux-stable/linux-5.1.y
SHA1: 5752b50477da)to provide clocks support as it is used on the Linux
kernel with Common Clock Framework [CCF] setup.

The directory structure has been preserved. The ported code only supports
reading information from PLL, MUX, Divider, etc and enabling/disabling
the clocks USDHCx/ECSPIx depending on used bus. Moreover, it is agnostic
to the alias numbering as the information about the clock is read from the
device tree.

One needs to pay attention to the comments indicating necessary for U-Boot's
driver model changes.

If needed, the code can be extended to support the "set" part of the clock
management.

Signed-off-by: Lukasz Majewski <lukma@denx.de>

dm: core: Require users of devres to include the header

At present devres.h is included in all files that include dm.h but few
make use of it. Also this pulls in linux/compat which adds several more
headers. Drop the automatic inclusion and require files to include devres
themselves. This provides a good indication of which files use devres.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Anatolij Gustschin <agust@denx.de>

clk: imx: pfd: add set_rate()

Implement set_rate() for pfd.

Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Reviewed-by: Lukasz Majewski <lukma@denx.de>

clk: Port Linux common clock framework [CCF] for imx6q to U-boot (tag: v5.1.12)

This patch brings the files from Linux kernel (linux-stable/linux-5.1.y
SHA1: 5752b50477da)to provide clocks support as it is used on the Linux
kernel with Common Clock Framework [CCF] setup.

The directory structure has been preserved. The ported code only supports
reading information from PLL, MUX, Divider, etc and enabling/disabling
the clocks USDHCx/ECSPIx depending on used bus. Moreover, it is agnostic
to the alias numbering as the information about the clock is read from the
device tree.

One needs to pay attention to the comments indicating necessary for U-Boot's
driver model changes.

If needed, the code can be extended to support the "set" part of the clock
management.

Signed-off-by: Lukasz Majewski <lukma@denx.de>

dm: core: Require users of devres to include the header

At present devres.h is included in all files that include dm.h but few
make use of it. Also this pulls in linux/compat which adds several more
headers. Drop the automatic inclusion and require files to include devres
themselves. This provides a good indication of which files use devres.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Anatolij Gustschin <agust@denx.de>

clk: imx: pfd: add set_rate()

Implement set_rate() for pfd.

Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Reviewed-by: Lukasz Majewski <lukma@denx.de>

clk: Port Linux common clock framework [CCF] for imx6q to U-boot (tag: v5.1.12)

This patch brings the files from Linux kernel (linux-stable/linux-5.1.y
SHA1: 5752b50477da)to provide clocks support as it is used on the Linux
kernel with Common Clock Framework [CCF] setup.

The directory structure has been preserved. The ported code only supports
reading information from PLL, MUX, Divider, etc and enabling/disabling
the clocks USDHCx/ECSPIx depending on used bus. Moreover, it is agnostic
to the alias numbering as the information about the clock is read from the
device tree.

One needs to pay attention to the comments indicating necessary for U-Boot's
driver model changes.

If needed, the code can be extended to support the "set" part of the clock
management.

Signed-off-by: Lukasz Majewski <lukma@denx.de>

dm: core: Require users of devres to include the header

At present devres.h is included in all files that include dm.h but few
make use of it. Also this pulls in linux/compat which adds several more
headers. Drop the automatic inclusion and require files to include devres
themselves. This provides a good indication of which files use devres.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Anatolij Gustschin <agust@denx.de>

clk: imx: pfd: add set_rate()

Implement set_rate() for pfd.

Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Reviewed-by: Lukasz Majewski <lukma@denx.de>

clk: Port Linux common clock framework [CCF] for imx6q to U-boot (tag: v5.1.12)

This patch brings the files from Linux kernel (linux-stable/linux-5.1.y
SHA1: 5752b50477da)to provide clocks support as it is used on the Linux
kernel with Common Clock Framework [CCF] setup.

The directory structure has been preserved. The ported code only supports
reading information from PLL, MUX, Divider, etc and enabling/disabling
the clocks USDHCx/ECSPIx depending on used bus. Moreover, it is agnostic
to the alias numbering as the information about the clock is read from the
device tree.

One needs to pay attention to the comments indicating necessary for U-Boot's
driver model changes.

If needed, the code can be extended to support the "set" part of the clock
management.

Signed-off-by: Lukasz Majewski <lukma@denx.de>

dm: core: Require users of devres to include the header

At present devres.h is included in all files that include dm.h but few
make use of it. Also this pulls in linux/compat which adds several more
headers. Drop the automatic inclusion and require files to include devres
themselves. This provides a good indication of which files use devres.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Anatolij Gustschin <agust@denx.de>

clk: imx: pfd: add set_rate()

Implement set_rate() for pfd.

Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Reviewed-by: Lukasz Majewski <lukma@denx.de>

clk: Port Linux common clock framework [CCF] for imx6q to U-boot (tag: v5.1.12)

This patch brings the files from Linux kernel (linux-stable/linux-5.1.y
SHA1: 5752b50477da)to provide clocks support as it is used on the Linux
kernel with Common Clock Framework [CCF] setup.

The directory structure has been preserved. The ported code only supports
reading information from PLL, MUX, Divider, etc and enabling/disabling
the clocks USDHCx/ECSPIx depending on used bus. Moreover, it is agnostic
to the alias numbering as the information about the clock is read from the
device tree.

One needs to pay attention to the comments indicating necessary for U-Boot's
driver model changes.

If needed, the code can be extended to support the "set" part of the clock
management.

Signed-off-by: Lukasz Majewski <lukma@denx.de>

dm: core: Require users of devres to include the header

At present devres.h is included in all files that include dm.h but few
make use of it. Also this pulls in linux/compat which adds several more
headers. Drop the automatic inclusion and require files to include devres
themselves. This provides a good indication of which files use devres.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Anatolij Gustschin <agust@denx.de>

clk: imx: pfd: add set_rate()

Implement set_rate() for pfd.

Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Reviewed-by: Lukasz Majewski <lukma@denx.de>

clk: Port Linux common clock framework [CCF] for imx6q to U-boot (tag: v5.1.12)

This patch brings the files from Linux kernel (linux-stable/linux-5.1.y
SHA1: 5752b50477da)to provide clocks support as it is used on the Linux
kernel with Common Clock Framework [CCF] setup.

The directory structure has been preserved. The ported code only supports
reading information from PLL, MUX, Divider, etc and enabling/disabling
the clocks USDHCx/ECSPIx depending on used bus. Moreover, it is agnostic
to the alias numbering as the information about the clock is read from the
device tree.

One needs to pay attention to the comments indicating necessary for U-Boot's
driver model changes.

If needed, the code can be extended to support the "set" part of the clock
management.

Signed-off-by: Lukasz Majewski <lukma@denx.de>

dm: core: Require users of devres to include the header

At present devres.h is included in all files that include dm.h but few
make use of it. Also this pulls in linux/compat which adds several more
headers. Drop the automatic inclusion and require files to include devres
themselves. This provides a good indication of which files use devres.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Anatolij Gustschin <agust@denx.de>

clk: imx: pfd: add set_rate()

Implement set_rate() for pfd.

Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Reviewed-by: Lukasz Majewski <lukma@denx.de>

clk: Port Linux common clock framework [CCF] for imx6q to U-boot (tag: v5.1.12)

This patch brings the files from Linux kernel (linux-stable/linux-5.1.y
SHA1: 5752b50477da)to provide clocks support as it is used on the Linux
kernel with Common Clock Framework [CCF] setup.

The directory structure has been preserved. The ported code only supports
reading information from PLL, MUX, Divider, etc and enabling/disabling
the clocks USDHCx/ECSPIx depending on used bus. Moreover, it is agnostic
to the alias numbering as the information about the clock is read from the
device tree.

One needs to pay attention to the comments indicating necessary for U-Boot's
driver model changes.

If needed, the code can be extended to support the "set" part of the clock
management.

Signed-off-by: Lukasz Majewski <lukma@denx.de>

dm: core: Require users of devres to include the header

At present devres.h is included in all files that include dm.h but few
make use of it. Also this pulls in linux/compat which adds several more
headers. Drop the automatic inclusion and require files to include devres
themselves. This provides a good indication of which files use devres.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Anatolij Gustschin <agust@denx.de>

clk: imx: pfd: add set_rate()

Implement set_rate() for pfd.

Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Reviewed-by: Lukasz Majewski <lukma@denx.de>

clk: Port Linux common clock framework [CCF] for imx6q to U-boot (tag: v5.1.12)

This patch brings the files from Linux kernel (linux-stable/linux-5.1.y
SHA1: 5752b50477da)to provide clocks support as it is used on the Linux
kernel with Common Clock Framework [CCF] setup.

The directory structure has been preserved. The ported code only supports
reading information from PLL, MUX, Divider, etc and enabling/disabling
the clocks USDHCx/ECSPIx depending on used bus. Moreover, it is agnostic
to the alias numbering as the information about the clock is read from the
device tree.

One needs to pay attention to the comments indicating necessary for U-Boot's
driver model changes.

If needed, the code can be extended to support the "set" part of the clock
management.

Signed-off-by: Lukasz Majewski <lukma@denx.de>

dm: core: Require users of devres to include the header

At present devres.h is included in all files that include dm.h but few
make use of it. Also this pulls in linux/compat which adds several more
headers. Drop the automatic inclusion and require files to include devres
themselves. This provides a good indication of which files use devres.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Anatolij Gustschin <agust@denx.de>

clk: imx: pfd: add set_rate()

Implement set_rate() for pfd.

Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Reviewed-by: Lukasz Majewski <lukma@denx.de>

clk: Port Linux common clock framework [CCF] for imx6q to U-boot (tag: v5.1.12)

This patch brings the files from Linux kernel (linux-stable/linux-5.1.y
SHA1: 5752b50477da)to provide clocks support as it is used on the Linux
kernel with Common Clock Framework [CCF] setup.

The directory structure has been preserved. The ported code only supports
reading information from PLL, MUX, Divider, etc and enabling/disabling
the clocks USDHCx/ECSPIx depending on used bus. Moreover, it is agnostic
to the alias numbering as the information about the clock is read from the
device tree.

One needs to pay attention to the comments indicating necessary for U-Boot's
driver model changes.

If needed, the code can be extended to support the "set" part of the clock
management.

Signed-off-by: Lukasz Majewski <lukma@denx.de>

dm: core: Require users of devres to include the header

At present devres.h is included in all files that include dm.h but few
make use of it. Also this pulls in linux/compat which adds several more
headers. Drop the automatic inclusion and require files to include devres
themselves. This provides a good indication of which files use devres.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Anatolij Gustschin <agust@denx.de>

clk: imx: pfd: add set_rate()

Implement set_rate() for pfd.

Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Reviewed-by: Lukasz Majewski <lukma@denx.de>

clk: Port Linux common clock framework [CCF] for imx6q to U-boot (tag: v5.1.12)

This patch brings the files from Linux kernel (linux-stable/linux-5.1.y
SHA1: 5752b50477da)to provide clocks support as it is used on the Linux
kernel with Common Clock Framework [CCF] setup.

The directory structure has been preserved. The ported code only supports
reading information from PLL, MUX, Divider, etc and enabling/disabling
the clocks USDHCx/ECSPIx depending on used bus. Moreover, it is agnostic
to the alias numbering as the information about the clock is read from the
device tree.

One needs to pay attention to the comments indicating necessary for U-Boot's
driver model changes.

If needed, the code can be extended to support the "set" part of the clock
management.

Signed-off-by: Lukasz Majewski <lukma@denx.de>

dm: core: Require users of devres to include the header

At present devres.h is included in all files that include dm.h but few
make use of it. Also this pulls in linux/compat which adds several more
headers. Drop the automatic inclusion and require files to include devres
themselves. This provides a good indication of which files use devres.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Anatolij Gustschin <agust@denx.de>

clk: imx: pfd: add set_rate()

Implement set_rate() for pfd.

Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Reviewed-by: Lukasz Majewski <lukma@denx.de>

clk: Port Linux common clock framework [CCF] for imx6q to U-boot (tag: v5.1.12)

This patch brings the files from Linux kernel (linux-stable/linux-5.1.y
SHA1: 5752b50477da)to provide clocks support as it is used on the Linux
kernel with Common Clock Framework [CCF] setup.

The directory structure has been preserved. The ported code only supports
reading information from PLL, MUX, Divider, etc and enabling/disabling
the clocks USDHCx/ECSPIx depending on used bus. Moreover, it is agnostic
to the alias numbering as the information about the clock is read from the
device tree.

One needs to pay attention to the comments indicating necessary for U-Boot's
driver model changes.

If needed, the code can be extended to support the "set" part of the clock
management.

Signed-off-by: Lukasz Majewski <lukma@denx.de>

dm: core: Require users of devres to include the header

At present devres.h is included in all files that include dm.h but few
make use of it. Also this pulls in linux/compat which adds several more
headers. Drop the automatic inclusion and require files to include devres
themselves. This provides a good indication of which files use devres.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Anatolij Gustschin <agust@denx.de>

clk: imx: pfd: add set_rate()

Implement set_rate() for pfd.

Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Reviewed-by: Lukasz Majewski <lukma@denx.de>

clk: Port Linux common clock framework [CCF] for imx6q to U-boot (tag: v5.1.12)

This patch brings the files from Linux kernel (linux-stable/linux-5.1.y
SHA1: 5752b50477da)to provide clocks support as it is used on the Linux
kernel with Common Clock Framework [CCF] setup.

The directory structure has been preserved. The ported code only supports
reading information from PLL, MUX, Divider, etc and enabling/disabling
the clocks USDHCx/ECSPIx depending on used bus. Moreover, it is agnostic
to the alias numbering as the information about the clock is read from the
device tree.

One needs to pay attention to the comments indicating necessary for U-Boot's
driver model changes.

If needed, the code can be extended to support the "set" part of the clock
management.

Signed-off-by: Lukasz Majewski <lukma@denx.de>

dm: core: Require users of devres to include the header

At present devres.h is included in all files that include dm.h but few
make use of it. Also this pulls in linux/compat which adds several more
headers. Drop the automatic inclusion and require files to include devres
themselves. This provides a good indication of which files use devres.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Anatolij Gustschin <agust@denx.de>

clk: imx: pfd: add set_rate()

Implement set_rate() for pfd.

Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Reviewed-by: Lukasz Majewski <lukma@denx.de>

clk: Port Linux common clock framework [CCF] for imx6q to U-boot (tag: v5.1.12)

This patch brings the files from Linux kernel (linux-stable/linux-5.1.y
SHA1: 5752b50477da)to provide clocks support as it is used on the Linux
kernel with Common Clock Framework [CCF] setup.

The directory structure has been preserved. The ported code only supports
reading information from PLL, MUX, Divider, etc and enabling/disabling
the clocks USDHCx/ECSPIx depending on used bus. Moreover, it is agnostic
to the alias numbering as the information about the clock is read from the
device tree.

One needs to pay attention to the comments indicating necessary for U-Boot's
driver model changes.

If needed, the code can be extended to support the "set" part of the clock
management.

Signed-off-by: Lukasz Majewski <lukma@denx.de>

dm: core: Require users of devres to include the header

At present devres.h is included in all files that include dm.h but few
make use of it. Also this pulls in linux/compat which adds several more
headers. Drop the automatic inclusion and require files to include devres
themselves. This provides a good indication of which files use devres.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Anatolij Gustschin <agust@denx.de>

clk: imx: pfd: add set_rate()

Implement set_rate() for pfd.

Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Reviewed-by: Lukasz Majewski <lukma@denx.de>

clk: Port Linux common clock framework [CCF] for imx6q to U-boot (tag: v5.1.12)

This patch brings the files from Linux kernel (linux-stable/linux-5.1.y
SHA1: 5752b50477da)to provide clocks support as it is used on the Linux
kernel with Common Clock Framework [CCF] setup.

The directory structure has been preserved. The ported code only supports
reading information from PLL, MUX, Divider, etc and enabling/disabling
the clocks USDHCx/ECSPIx depending on used bus. Moreover, it is agnostic
to the alias numbering as the information about the clock is read from the
device tree.

One needs to pay attention to the comments indicating necessary for U-Boot's
driver model changes.

If needed, the code can be extended to support the "set" part of the clock
management.

Signed-off-by: Lukasz Majewski <lukma@denx.de>

dm: core: Require users of devres to include the header

At present devres.h is included in all files that include dm.h but few
make use of it. Also this pulls in linux/compat which adds several more
headers. Drop the automatic inclusion and require files to include devres
themselves. This provides a good indication of which files use devres.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Anatolij Gustschin <agust@denx.de>

clk: imx: pfd: add set_rate()

Implement set_rate() for pfd.

Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Reviewed-by: Lukasz Majewski <lukma@denx.de>

clk: Port Linux common clock framework [CCF] for imx6q to U-boot (tag: v5.1.12)

This patch brings the files from Linux kernel (linux-stable/linux-5.1.y
SHA1: 5752b50477da)to provide clocks support as it is used on the Linux
kernel with Common Clock Framework [CCF] setup.

The directory structure has been preserved. The ported code only supports
reading information from PLL, MUX, Divider, etc and enabling/disabling
the clocks USDHCx/ECSPIx depending on used bus. Moreover, it is agnostic
to the alias numbering as the information about the clock is read from the
device tree.

One needs to pay attention to the comments indicating necessary for U-Boot's
driver model changes.

If needed, the code can be extended to support the "set" part of the clock
management.

Signed-off-by: Lukasz Majewski <lukma@denx.de>

dm: core: Require users of devres to include the header

At present devres.h is included in all files that include dm.h but few
make use of it. Also this pulls in linux/compat which adds several more
headers. Drop the automatic inclusion and require files to include devres
themselves. This provides a good indication of which files use devres.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Anatolij Gustschin <agust@denx.de>

clk: imx: pfd: add set_rate()

Implement set_rate() for pfd.

Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Reviewed-by: Lukasz Majewski <lukma@denx.de>

clk: Port Linux common clock framework [CCF] for imx6q to U-boot (tag: v5.1.12)

This patch brings the files from Linux kernel (linux-stable/linux-5.1.y
SHA1: 5752b50477da)to provide clocks support as it is used on the Linux
kernel with Common Clock Framework [CCF] setup.

The directory structure has been preserved. The ported code only supports
reading information from PLL, MUX, Divider, etc and enabling/disabling
the clocks USDHCx/ECSPIx depending on used bus. Moreover, it is agnostic
to the alias numbering as the information about the clock is read from the
device tree.

One needs to pay attention to the comments indicating necessary for U-Boot's
driver model changes.

If needed, the code can be extended to support the "set" part of the clock
management.

Signed-off-by: Lukasz Majewski <lukma@denx.de>

dm: core: Require users of devres to include the header

At present devres.h is included in all files that include dm.h but few
make use of it. Also this pulls in linux/compat which adds several more
headers. Drop the automatic inclusion and require files to include devres
themselves. This provides a good indication of which files use devres.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Anatolij Gustschin <agust@denx.de>

clk: imx: pfd: add set_rate()

Implement set_rate() for pfd.

Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Reviewed-by: Lukasz Majewski <lukma@denx.de>

clk: Port Linux common clock framework [CCF] for imx6q to U-boot (tag: v5.1.12)

This patch brings the files from Linux kernel (linux-stable/linux-5.1.y
SHA1: 5752b50477da)to provide clocks support as it is used on the Linux
kernel with Common Clock Framework [CCF] setup.

The directory structure has been preserved. The ported code only supports
reading information from PLL, MUX, Divider, etc and enabling/disabling
the clocks USDHCx/ECSPIx depending on used bus. Moreover, it is agnostic
to the alias numbering as the information about the clock is read from the
device tree.

One needs to pay attention to the comments indicating necessary for U-Boot's
driver model changes.

If needed, the code can be extended to support the "set" part of the clock
management.

Signed-off-by: Lukasz Majewski <lukma@denx.de>

dm: core: Require users of devres to include the header

At present devres.h is included in all files that include dm.h but few
make use of it. Also this pulls in linux/compat which adds several more
headers. Drop the automatic inclusion and require files to include devres
themselves. This provides a good indication of which files use devres.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Anatolij Gustschin <agust@denx.de>

clk: imx: pfd: add set_rate()

Implement set_rate() for pfd.

Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Reviewed-by: Lukasz Majewski <lukma@denx.de>

clk: Port Linux common clock framework [CCF] for imx6q to U-boot (tag: v5.1.12)

This patch brings the files from Linux kernel (linux-stable/linux-5.1.y
SHA1: 5752b50477da)to provide clocks support as it is used on the Linux
kernel with Common Clock Framework [CCF] setup.

The directory structure has been preserved. The ported code only supports
reading information from PLL, MUX, Divider, etc and enabling/disabling
the clocks USDHCx/ECSPIx depending on used bus. Moreover, it is agnostic
to the alias numbering as the information about the clock is read from the
device tree.

One needs to pay attention to the comments indicating necessary for U-Boot's
driver model changes.

If needed, the code can be extended to support the "set" part of the clock
management.

Signed-off-by: Lukasz Majewski <lukma@denx.de>

dm: core: Require users of devres to include the header

At present devres.h is included in all files that include dm.h but few
make use of it. Also this pulls in linux/compat which adds several more
headers. Drop the automatic inclusion and require files to include devres
themselves. This provides a good indication of which files use devres.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Anatolij Gustschin <agust@denx.de>

clk: imx: pfd: add set_rate()

Implement set_rate() for pfd.

Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Reviewed-by: Lukasz Majewski <lukma@denx.de>

clk: Port Linux common clock framework [CCF] for imx6q to U-boot (tag: v5.1.12)

This patch brings the files from Linux kernel (linux-stable/linux-5.1.y
SHA1: 5752b50477da)to provide clocks support as it is used on the Linux
kernel with Common Clock Framework [CCF] setup.

The directory structure has been preserved. The ported code only supports
reading information from PLL, MUX, Divider, etc and enabling/disabling
the clocks USDHCx/ECSPIx depending on used bus. Moreover, it is agnostic
to the alias numbering as the information about the clock is read from the
device tree.

One needs to pay attention to the comments indicating necessary for U-Boot's
driver model changes.

If needed, the code can be extended to support the "set" part of the clock
management.

Signed-off-by: Lukasz Majewski <lukma@denx.de>

dm: core: Require users of devres to include the header

At present devres.h is included in all files that include dm.h but few
make use of it. Also this pulls in linux/compat which adds several more
headers. Drop the automatic inclusion and require files to include devres
themselves. This provides a good indication of which files use devres.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Anatolij Gustschin <agust@denx.de>

clk: imx: pfd: add set_rate()

Implement set_rate() for pfd.

Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Reviewed-by: Lukasz Majewski <lukma@denx.de>

clk: Port Linux common clock framework [CCF] for imx6q to U-boot (tag: v5.1.12)

This patch brings the files from Linux kernel (linux-stable/linux-5.1.y
SHA1: 5752b50477da)to provide clocks support as it is used on the Linux
kernel with Common Clock Framework [CCF] setup.

The directory structure has been preserved. The ported code only supports
reading information from PLL, MUX, Divider, etc and enabling/disabling
the clocks USDHCx/ECSPIx depending on used bus. Moreover, it is agnostic
to the alias numbering as the information about the clock is read from the
device tree.

One needs to pay attention to the comments indicating necessary for U-Boot's
driver model changes.

If needed, the code can be extended to support the "set" part of the clock
management.

Signed-off-by: Lukasz Majewski <lukma@denx.de>

dm: core: Require users of devres to include the header

At present devres.h is included in all files that include dm.h but few
make use of it. Also this pulls in linux/compat which adds several more
headers. Drop the automatic inclusion and require files to include devres
themselves. This provides a good indication of which files use devres.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Anatolij Gustschin <agust@denx.de>

clk: imx: pfd: add set_rate()

Implement set_rate() for pfd.

Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Reviewed-by: Lukasz Majewski <lukma@denx.de>

clk: Port Linux common clock framework [CCF] for imx6q to U-boot (tag: v5.1.12)

This patch brings the files from Linux kernel (linux-stable/linux-5.1.y
SHA1: 5752b50477da)to provide clocks support as it is used on the Linux
kernel with Common Clock Framework [CCF] setup.

The directory structure has been preserved. The ported code only supports
reading information from PLL, MUX, Divider, etc and enabling/disabling
the clocks USDHCx/ECSPIx depending on used bus. Moreover, it is agnostic
to the alias numbering as the information about the clock is read from the
device tree.

One needs to pay attention to the comments indicating necessary for U-Boot's
driver model changes.

If needed, the code can be extended to support the "set" part of the clock
management.

Signed-off-by: Lukasz Majewski <lukma@denx.de>

dm: core: Require users of devres to include the header

At present devres.h is included in all files that include dm.h but few
make use of it. Also this pulls in linux/compat which adds several more
headers. Drop the automatic inclusion and require files to include devres
themselves. This provides a good indication of which files use devres.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Anatolij Gustschin <agust@denx.de>

clk: imx: pfd: add set_rate()

Implement set_rate() for pfd.

Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Reviewed-by: Lukasz Majewski <lukma@denx.de>

clk: Port Linux common clock framework [CCF] for imx6q to U-boot (tag: v5.1.12)

This patch brings the files from Linux kernel (linux-stable/linux-5.1.y
SHA1: 5752b50477da)to provide clocks support as it is used on the Linux
kernel with Common Clock Framework [CCF] setup.

The directory structure has been preserved. The ported code only supports
reading information from PLL, MUX, Divider, etc and enabling/disabling
the clocks USDHCx/ECSPIx depending on used bus. Moreover, it is agnostic
to the alias numbering as the information about the clock is read from the
device tree.

One needs to pay attention to the comments indicating necessary for U-Boot's
driver model changes.

If needed, the code can be extended to support the "set" part of the clock
management.

Signed-off-by: Lukasz Majewski <lukma@denx.de>

dm: core: Require users of devres to include the header

At present devres.h is included in all files that include dm.h but few
make use of it. Also this pulls in linux/compat which adds several more
headers. Drop the automatic inclusion and require files to include devres
themselves. This provides a good indication of which files use devres.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Anatolij Gustschin <agust@denx.de>

clk: imx: pfd: add set_rate()

Implement set_rate() for pfd.

Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Reviewed-by: Lukasz Majewski <lukma@denx.de>

clk: Port Linux common clock framework [CCF] for imx6q to U-boot (tag: v5.1.12)

This patch brings the files from Linux kernel (linux-stable/linux-5.1.y
SHA1: 5752b50477da)to provide clocks support as it is used on the Linux
kernel with Common Clock Framework [CCF] setup.

The directory structure has been preserved. The ported code only supports
reading information from PLL, MUX, Divider, etc and enabling/disabling
the clocks USDHCx/ECSPIx depending on used bus. Moreover, it is agnostic
to the alias numbering as the information about the clock is read from the
device tree.

One needs to pay attention to the comments indicating necessary for U-Boot's
driver model changes.

If needed, the code can be extended to support the "set" part of the clock
management.

Signed-off-by: Lukasz Majewski <lukma@denx.de>

dm: core: Require users of devres to include the header

At present devres.h is included in all files that include dm.h but few
make use of it. Also this pulls in linux/compat which adds several more
headers. Drop the automatic inclusion and require files to include devres
themselves. This provides a good indication of which files use devres.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Anatolij Gustschin <agust@denx.de>

clk: imx: pfd: add set_rate()

Implement set_rate() for pfd.

Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Reviewed-by: Lukasz Majewski <lukma@denx.de>

clk: Port Linux common clock framework [CCF] for imx6q to U-boot (tag: v5.1.12)

This patch brings the files from Linux kernel (linux-stable/linux-5.1.y
SHA1: 5752b50477da)to provide clocks support as it is used on the Linux
kernel with Common Clock Framework [CCF] setup.

The directory structure has been preserved. The ported code only supports
reading information from PLL, MUX, Divider, etc and enabling/disabling
the clocks USDHCx/ECSPIx depending on used bus. Moreover, it is agnostic
to the alias numbering as the information about the clock is read from the
device tree.

One needs to pay attention to the comments indicating necessary for U-Boot's
driver model changes.

If needed, the code can be extended to support the "set" part of the clock
management.

Signed-off-by: Lukasz Majewski <lukma@denx.de>

dm: core: Require users of devres to include the header

At present devres.h is included in all files that include dm.h but few
make use of it. Also this pulls in linux/compat which adds several more
headers. Drop the automatic inclusion and require files to include devres
themselves. This provides a good indication of which files use devres.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Anatolij Gustschin <agust@denx.de>

clk: imx: pfd: add set_rate()

Implement set_rate() for pfd.

Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Reviewed-by: Lukasz Majewski <lukma@denx.de>

clk: Port Linux common clock framework [CCF] for imx6q to U-boot (tag: v5.1.12)

This patch brings the files from Linux kernel (linux-stable/linux-5.1.y
SHA1: 5752b50477da)to provide clocks support as it is used on the Linux
kernel with Common Clock Framework [CCF] setup.

The directory structure has been preserved. The ported code only supports
reading information from PLL, MUX, Divider, etc and enabling/disabling
the clocks USDHCx/ECSPIx depending on used bus. Moreover, it is agnostic
to the alias numbering as the information about the clock is read from the
device tree.

One needs to pay attention to the comments indicating necessary for U-Boot's
driver model changes.

If needed, the code can be extended to support the "set" part of the clock
management.

Signed-off-by: Lukasz Majewski <lukma@denx.de>

dm: core: Require users of devres to include the header

At present devres.h is included in all files that include dm.h but few
make use of it. Also this pulls in linux/compat which adds several more
headers. Drop the automatic inclusion and require files to include devres
themselves. This provides a good indication of which files use devres.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Anatolij Gustschin <agust@denx.de>

clk: imx: pfd: add set_rate()

Implement set_rate() for pfd.

Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Reviewed-by: Lukasz Majewski <lukma@denx.de>

clk: Port Linux common clock framework [CCF] for imx6q to U-boot (tag: v5.1.12)

This patch brings the files from Linux kernel (linux-stable/linux-5.1.y
SHA1: 5752b50477da)to provide clocks support as it is used on the Linux
kernel with Common Clock Framework [CCF] setup.

The directory structure has been preserved. The ported code only supports
reading information from PLL, MUX, Divider, etc and enabling/disabling
the clocks USDHCx/ECSPIx depending on used bus. Moreover, it is agnostic
to the alias numbering as the information about the clock is read from the
device tree.

One needs to pay attention to the comments indicating necessary for U-Boot's
driver model changes.

If needed, the code can be extended to support the "set" part of the clock
management.

Signed-off-by: Lukasz Majewski <lukma@denx.de>

dm: core: Require users of devres to include the header

At present devres.h is included in all files that include dm.h but few
make use of it. Also this pulls in linux/compat which adds several more
headers. Drop the automatic inclusion and require files to include devres
themselves. This provides a good indication of which files use devres.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Anatolij Gustschin <agust@denx.de>

clk: imx: pfd: add set_rate()

Implement set_rate() for pfd.

Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Reviewed-by: Lukasz Majewski <lukma@denx.de>

clk: Port Linux common clock framework [CCF] for imx6q to U-boot (tag: v5.1.12)

This patch brings the files from Linux kernel (linux-stable/linux-5.1.y
SHA1: 5752b50477da)to provide clocks support as it is used on the Linux
kernel with Common Clock Framework [CCF] setup.

The directory structure has been preserved. The ported code only supports
reading information from PLL, MUX, Divider, etc and enabling/disabling
the clocks USDHCx/ECSPIx depending on used bus. Moreover, it is agnostic
to the alias numbering as the information about the clock is read from the
device tree.

One needs to pay attention to the comments indicating necessary for U-Boot's
driver model changes.

If needed, the code can be extended to support the "set" part of the clock
management.

Signed-off-by: Lukasz Majewski <lukma@denx.de>

dm: core: Require users of devres to include the header

At present devres.h is included in all files that include dm.h but few
make use of it. Also this pulls in linux/compat which adds several more
headers. Drop the automatic inclusion and require files to include devres
themselves. This provides a good indication of which files use devres.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Anatolij Gustschin <agust@denx.de>

clk: imx: pfd: add set_rate()

Implement set_rate() for pfd.

Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Reviewed-by: Lukasz Majewski <lukma@denx.de>

clk: Port Linux common clock framework [CCF] for imx6q to U-boot (tag: v5.1.12)

This patch brings the files from Linux kernel (linux-stable/linux-5.1.y
SHA1: 5752b50477da)to provide clocks support as it is used on the Linux
kernel with Common Clock Framework [CCF] setup.

The directory structure has been preserved. The ported code only supports
reading information from PLL, MUX, Divider, etc and enabling/disabling
the clocks USDHCx/ECSPIx depending on used bus. Moreover, it is agnostic
to the alias numbering as the information about the clock is read from the
device tree.

One needs to pay attention to the comments indicating necessary for U-Boot's
driver model changes.

If needed, the code can be extended to support the "set" part of the clock
management.

Signed-off-by: Lukasz Majewski <lukma@denx.de>

dm: core: Require users of devres to include the header

At present devres.h is included in all files that include dm.h but few
make use of it. Also this pulls in linux/compat which adds several more
headers. Drop the automatic inclusion and require files to include devres
themselves. This provides a good indication of which files use devres.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Anatolij Gustschin <agust@denx.de>

clk: imx: pfd: add set_rate()

Implement set_rate() for pfd.

Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Reviewed-by: Lukasz Majewski <lukma@denx.de>

clk: Port Linux common clock framework [CCF] for imx6q to U-boot (tag: v5.1.12)

This patch brings the files from Linux kernel (linux-stable/linux-5.1.y
SHA1: 5752b50477da)to provide clocks support as it is used on the Linux
kernel with Common Clock Framework [CCF] setup.

The directory structure has been preserved. The ported code only supports
reading information from PLL, MUX, Divider, etc and enabling/disabling
the clocks USDHCx/ECSPIx depending on used bus. Moreover, it is agnostic
to the alias numbering as the information about the clock is read from the
device tree.

One needs to pay attention to the comments indicating necessary for U-Boot's
driver model changes.

If needed, the code can be extended to support the "set" part of the clock
management.

Signed-off-by: Lukasz Majewski <lukma@denx.de>

dm: core: Require users of devres to include the header

At present devres.h is included in all files that include dm.h but few
make use of it. Also this pulls in linux/compat which adds several more
headers. Drop the automatic inclusion and require files to include devres
themselves. This provides a good indication of which files use devres.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Anatolij Gustschin <agust@denx.de>

clk: imx: pfd: add set_rate()

Implement set_rate() for pfd.

Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Reviewed-by: Lukasz Majewski <lukma@denx.de>

clk: Port Linux common clock framework [CCF] for imx6q to U-boot (tag: v5.1.12)

This patch brings the files from Linux kernel (linux-stable/linux-5.1.y
SHA1: 5752b50477da)to provide clocks support as it is used on the Linux
kernel with Common Clock Framework [CCF] setup.

The directory structure has been preserved. The ported code only supports
reading information from PLL, MUX, Divider, etc and enabling/disabling
the clocks USDHCx/ECSPIx depending on used bus. Moreover, it is agnostic
to the alias numbering as the information about the clock is read from the
device tree.

One needs to pay attention to the comments indicating necessary for U-Boot's
driver model changes.

If needed, the code can be extended to support the "set" part of the clock
management.

Signed-off-by: Lukasz Majewski <lukma@denx.de>

dm: core: Require users of devres to include the header

At present devres.h is included in all files that include dm.h but few
make use of it. Also this pulls in linux/compat which adds several more
headers. Drop the automatic inclusion and require files to include devres
themselves. This provides a good indication of which files use devres.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Anatolij Gustschin <agust@denx.de>

clk: imx: pfd: add set_rate()

Implement set_rate() for pfd.

Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Reviewed-by: Lukasz Majewski <lukma@denx.de>

clk: Port Linux common clock framework [CCF] for imx6q to U-boot (tag: v5.1.12)

This patch brings the files from Linux kernel (linux-stable/linux-5.1.y
SHA1: 5752b50477da)to provide clocks support as it is used on the Linux
kernel with Common Clock Framework [CCF] setup.

The directory structure has been preserved. The ported code only supports
reading information from PLL, MUX, Divider, etc and enabling/disabling
the clocks USDHCx/ECSPIx depending on used bus. Moreover, it is agnostic
to the alias numbering as the information about the clock is read from the
device tree.

One needs to pay attention to the comments indicating necessary for U-Boot's
driver model changes.

If needed, the code can be extended to support the "set" part of the clock
management.

Signed-off-by: Lukasz Majewski <lukma@denx.de>

dm: core: Require users of devres to include the header

At present devres.h is included in all files that include dm.h but few
make use of it. Also this pulls in linux/compat which adds several more
headers. Drop the automatic inclusion and require files to include devres
themselves. This provides a good indication of which files use devres.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Anatolij Gustschin <agust@denx.de>

clk: imx: pfd: add set_rate()

Implement set_rate() for pfd.

Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Reviewed-by: Lukasz Majewski <lukma@denx.de>

clk: Port Linux common clock framework [CCF] for imx6q to U-boot (tag: v5.1.12)

This patch brings the files from Linux kernel (linux-stable/linux-5.1.y
SHA1: 5752b50477da)to provide clocks support as it is used on the Linux
kernel with Common Clock Framework [CCF] setup.

The directory structure has been preserved. The ported code only supports
reading information from PLL, MUX, Divider, etc and enabling/disabling
the clocks USDHCx/ECSPIx depending on used bus. Moreover, it is agnostic
to the alias numbering as the information about the clock is read from the
device tree.

One needs to pay attention to the comments indicating necessary for U-Boot's
driver model changes.

If needed, the code can be extended to support the "set" part of the clock
management.

Signed-off-by: Lukasz Majewski <lukma@denx.de>

dm: core: Require users of devres to include the header

At present devres.h is included in all files that include dm.h but few
make use of it. Also this pulls in linux/compat which adds several more
headers. Drop the automatic inclusion and require files to include devres
themselves. This provides a good indication of which files use devres.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Anatolij Gustschin <agust@denx.de>

clk: imx: pfd: add set_rate()

Implement set_rate() for pfd.

Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Reviewed-by: Lukasz Majewski <lukma@denx.de>

clk: Port Linux common clock framework [CCF] for imx6q to U-boot (tag: v5.1.12)

This patch brings the files from Linux kernel (linux-stable/linux-5.1.y
SHA1: 5752b50477da)to provide clocks support as it is used on the Linux
kernel with Common Clock Framework [CCF] setup.

The directory structure has been preserved. The ported code only supports
reading information from PLL, MUX, Divider, etc and enabling/disabling
the clocks USDHCx/ECSPIx depending on used bus. Moreover, it is agnostic
to the alias numbering as the information about the clock is read from the
device tree.

One needs to pay attention to the comments indicating necessary for U-Boot's
driver model changes.

If needed, the code can be extended to support the "set" part of the clock
management.

Signed-off-by: Lukasz Majewski <lukma@denx.de>

dm: core: Require users of devres to include the header

At present devres.h is included in all files that include dm.h but few
make use of it. Also this pulls in linux/compat which adds several more
headers. Drop the automatic inclusion and require files to include devres
themselves. This provides a good indication of which files use devres.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Anatolij Gustschin <agust@denx.de>

clk: imx: pfd: add set_rate()

Implement set_rate() for pfd.

Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Reviewed-by: Lukasz Majewski <lukma@denx.de>

clk: Port Linux common clock framework [CCF] for imx6q to U-boot (tag: v5.1.12)

This patch brings the files from Linux kernel (linux-stable/linux-5.1.y
SHA1: 5752b50477da)to provide clocks support as it is used on the Linux
kernel with Common Clock Framework [CCF] setup.

The directory structure has been preserved. The ported code only supports
reading information from PLL, MUX, Divider, etc and enabling/disabling
the clocks USDHCx/ECSPIx depending on used bus. Moreover, it is agnostic
to the alias numbering as the information about the clock is read from the
device tree.

One needs to pay attention to the comments indicating necessary for U-Boot's
driver model changes.

If needed, the code can be extended to support the "set" part of the clock
management.

Signed-off-by: Lukasz Majewski <lukma@denx.de>

dm: core: Require users of devres to include the header

At present devres.h is included in all files that include dm.h but few
make use of it. Also this pulls in linux/compat which adds several more
headers. Drop the automatic inclusion and require files to include devres
themselves. This provides a good indication of which files use devres.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Anatolij Gustschin <agust@denx.de>

clk: imx: pfd: add set_rate()

Implement set_rate() for pfd.

Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Reviewed-by: Lukasz Majewski <lukma@denx.de>

clk: Port Linux common clock framework [CCF] for imx6q to U-boot (tag: v5.1.12)

This patch brings the files from Linux kernel (linux-stable/linux-5.1.y
SHA1: 5752b50477da)to provide clocks support as it is used on the Linux
kernel with Common Clock Framework [CCF] setup.

The directory structure has been preserved. The ported code only supports
reading information from PLL, MUX, Divider, etc and enabling/disabling
the clocks USDHCx/ECSPIx depending on used bus. Moreover, it is agnostic
to the alias numbering as the information about the clock is read from the
device tree.

One needs to pay attention to the comments indicating necessary for U-Boot's
driver model changes.

If needed, the code can be extended to support the "set" part of the clock
management.

Signed-off-by: Lukasz Majewski <lukma@denx.de>

dm: core: Require users of devres to include the header

At present devres.h is included in all files that include dm.h but few
make use of it. Also this pulls in linux/compat which adds several more
headers. Drop the automatic inclusion and require files to include devres
themselves. This provides a good indication of which files use devres.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Anatolij Gustschin <agust@denx.de>

clk: imx: pfd: add set_rate()

Implement set_rate() for pfd.

Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Reviewed-by: Lukasz Majewski <lukma@denx.de>

clk: Port Linux common clock framework [CCF] for imx6q to U-boot (tag: v5.1.12)

This patch brings the files from Linux kernel (linux-stable/linux-5.1.y
SHA1: 5752b50477da)to provide clocks support as it is used on the Linux
kernel with Common Clock Framework [CCF] setup.

The directory structure has been preserved. The ported code only supports
reading information from PLL, MUX, Divider, etc and enabling/disabling
the clocks USDHCx/ECSPIx depending on used bus. Moreover, it is agnostic
to the alias numbering as the information about the clock is read from the
device tree.

One needs to pay attention to the comments indicating necessary for U-Boot's
driver model changes.

If needed, the code can be extended to support the "set" part of the clock
management.

Signed-off-by: Lukasz Majewski <lukma@denx.de>

dm: core: Require users of devres to include the header

At present devres.h is included in all files that include dm.h but few
make use of it. Also this pulls in linux/compat which adds several more
headers. Drop the automatic inclusion and require files to include devres
themselves. This provides a good indication of which files use devres.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Anatolij Gustschin <agust@denx.de>

clk: imx: pfd: add set_rate()

Implement set_rate() for pfd.

Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Reviewed-by: Lukasz Majewski <lukma@denx.de>

clk: Port Linux common clock framework [CCF] for imx6q to U-boot (tag: v5.1.12)

This patch brings the files from Linux kernel (linux-stable/linux-5.1.y
SHA1: 5752b50477da)to provide clocks support as it is used on the Linux
kernel with Common Clock Framework [CCF] setup.

The directory structure has been preserved. The ported code only supports
reading information from PLL, MUX, Divider, etc and enabling/disabling
the clocks USDHCx/ECSPIx depending on used bus. Moreover, it is agnostic
to the alias numbering as the information about the clock is read from the
device tree.

One needs to pay attention to the comments indicating necessary for U-Boot's
driver model changes.

If needed, the code can be extended to support the "set" part of the clock
management.

Signed-off-by: Lukasz Majewski <lukma@denx.de>

dm: core: Require users of devres to include the header

At present devres.h is included in all files that include dm.h but few
make use of it. Also this pulls in linux/compat which adds several more
headers. Drop the automatic inclusion and require files to include devres
themselves. This provides a good indication of which files use devres.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Anatolij Gustschin <agust@denx.de>

clk: imx: pfd: add set_rate()

Implement set_rate() for pfd.

Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Reviewed-by: Lukasz Majewski <lukma@denx.de>

clk: Port Linux common clock framework [CCF] for imx6q to U-boot (tag: v5.1.12)

This patch brings the files from Linux kernel (linux-stable/linux-5.1.y
SHA1: 5752b50477da)to provide clocks support as it is used on the Linux
kernel with Common Clock Framework [CCF] setup.

The directory structure has been preserved. The ported code only supports
reading information from PLL, MUX, Divider, etc and enabling/disabling
the clocks USDHCx/ECSPIx depending on used bus. Moreover, it is agnostic
to the alias numbering as the information about the clock is read from the
device tree.

One needs to pay attention to the comments indicating necessary for U-Boot's
driver model changes.

If needed, the code can be extended to support the "set" part of the clock
management.

Signed-off-by: Lukasz Majewski <lukma@denx.de>

dm: core: Require users of devres to include the header

At present devres.h is included in all files that include dm.h but few
make use of it. Also this pulls in linux/compat which adds several more
headers. Drop the automatic inclusion and require files to include devres
themselves. This provides a good indication of which files use devres.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Anatolij Gustschin <agust@denx.de>

clk: imx: pfd: add set_rate()

Implement set_rate() for pfd.

Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Reviewed-by: Lukasz Majewski <lukma@denx.de>

clk: Port Linux common clock framework [CCF] for imx6q to U-boot (tag: v5.1.12)

This patch brings the files from Linux kernel (linux-stable/linux-5.1.y
SHA1: 5752b50477da)to provide clocks support as it is used on the Linux
kernel with Common Clock Framework [CCF] setup.

The directory structure has been preserved. The ported code only supports
reading information from PLL, MUX, Divider, etc and enabling/disabling
the clocks USDHCx/ECSPIx depending on used bus. Moreover, it is agnostic
to the alias numbering as the information about the clock is read from the
device tree.

One needs to pay attention to the comments indicating necessary for U-Boot's
driver model changes.

If needed, the code can be extended to support the "set" part of the clock
management.

Signed-off-by: Lukasz Majewski <lukma@denx.de>

dm: core: Require users of devres to include the header

At present devres.h is included in all files that include dm.h but few
make use of it. Also this pulls in linux/compat which adds several more
headers. Drop the automatic inclusion and require files to include devres
themselves. This provides a good indication of which files use devres.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Anatolij Gustschin <agust@denx.de>

clk: imx: pfd: add set_rate()

Implement set_rate() for pfd.

Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Reviewed-by: Lukasz Majewski <lukma@denx.de>

clk: Port Linux common clock framework [CCF] for imx6q to U-boot (tag: v5.1.12)

This patch brings the files from Linux kernel (linux-stable/linux-5.1.y
SHA1: 5752b50477da)to provide clocks support as it is used on the Linux
kernel with Common Clock Framework [CCF] setup.

The directory structure has been preserved. The ported code only supports
reading information from PLL, MUX, Divider, etc and enabling/disabling
the clocks USDHCx/ECSPIx depending on used bus. Moreover, it is agnostic
to the alias numbering as the information about the clock is read from the
device tree.

One needs to pay attention to the comments indicating necessary for U-Boot's
driver model changes.

If needed, the code can be extended to support the "set" part of the clock
management.

Signed-off-by: Lukasz Majewski <lukma@denx.de>

dm: core: Require users of devres to include the header

At present devres.h is included in all files that include dm.h but few
make use of it. Also this pulls in linux/compat which adds several more
headers. Drop the automatic inclusion and require files to include devres
themselves. This provides a good indication of which files use devres.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Anatolij Gustschin <agust@denx.de>

clk: imx: pfd: add set_rate()

Implement set_rate() for pfd.

Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Reviewed-by: Lukasz Majewski <lukma@denx.de>

clk: Port Linux common clock framework [CCF] for imx6q to U-boot (tag: v5.1.12)

This patch brings the files from Linux kernel (linux-stable/linux-5.1.y
SHA1: 5752b50477da)to provide clocks support as it is used on the Linux
kernel with Common Clock Framework [CCF] setup.

The directory structure has been preserved. The ported code only supports
reading information from PLL, MUX, Divider, etc and enabling/disabling
the clocks USDHCx/ECSPIx depending on used bus. Moreover, it is agnostic
to the alias numbering as the information about the clock is read from the
device tree.

One needs to pay attention to the comments indicating necessary for U-Boot's
driver model changes.

If needed, the code can be extended to support the "set" part of the clock
management.

Signed-off-by: Lukasz Majewski <lukma@denx.de>

dm: core: Require users of devres to include the header

At present devres.h is included in all files that include dm.h but few
make use of it. Also this pulls in linux/compat which adds several more
headers. Drop the automatic inclusion and require files to include devres
themselves. This provides a good indication of which files use devres.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Anatolij Gustschin <agust@denx.de>

clk: imx: pfd: add set_rate()

Implement set_rate() for pfd.

Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Reviewed-by: Lukasz Majewski <lukma@denx.de>

clk: Port Linux common clock framework [CCF] for imx6q to U-boot (tag: v5.1.12)

This patch brings the files from Linux kernel (linux-stable/linux-5.1.y
SHA1: 5752b50477da)to provide clocks support as it is used on the Linux
kernel with Common Clock Framework [CCF] setup.

The directory structure has been preserved. The ported code only supports
reading information from PLL, MUX, Divider, etc and enabling/disabling
the clocks USDHCx/ECSPIx depending on used bus. Moreover, it is agnostic
to the alias numbering as the information about the clock is read from the
device tree.

One needs to pay attention to the comments indicating necessary for U-Boot's
driver model changes.

If needed, the code can be extended to support the "set" part of the clock
management.

Signed-off-by: Lukasz Majewski <lukma@denx.de>

dm: core: Require users of devres to include the header

At present devres.h is included in all files that include dm.h but few
make use of it. Also this pulls in linux/compat which adds several more
headers. Drop the automatic inclusion and require files to include devres
themselves. This provides a good indication of which files use devres.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Anatolij Gustschin <agust@denx.de>

clk: imx: pfd: add set_rate()

Implement set_rate() for pfd.

Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Reviewed-by: Lukasz Majewski <lukma@denx.de>

clk: Port Linux common clock framework [CCF] for imx6q to U-boot (tag: v5.1.12)

This patch brings the files from Linux kernel (linux-stable/linux-5.1.y
SHA1: 5752b50477da)to provide clocks support as it is used on the Linux
kernel with Common Clock Framework [CCF] setup.

The directory structure has been preserved. The ported code only supports
reading information from PLL, MUX, Divider, etc and enabling/disabling
the clocks USDHCx/ECSPIx depending on used bus. Moreover, it is agnostic
to the alias numbering as the information about the clock is read from the
device tree.

One needs to pay attention to the comments indicating necessary for U-Boot's
driver model changes.

If needed, the code can be extended to support the "set" part of the clock
management.

Signed-off-by: Lukasz Majewski <lukma@denx.de>

dm: core: Require users of devres to include the header

At present devres.h is included in all files that include dm.h but few
make use of it. Also this pulls in linux/compat which adds several more
headers. Drop the automatic inclusion and require files to include devres
themselves. This provides a good indication of which files use devres.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Anatolij Gustschin <agust@denx.de>

clk: imx: pfd: add set_rate()

Implement set_rate() for pfd.

Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Reviewed-by: Lukasz Majewski <lukma@denx.de>

clk: Port Linux common clock framework [CCF] for imx6q to U-boot (tag: v5.1.12)

This patch brings the files from Linux kernel (linux-stable/linux-5.1.y
SHA1: 5752b50477da)to provide clocks support as it is used on the Linux
kernel with Common Clock Framework [CCF] setup.

The directory structure has been preserved. The ported code only supports
reading information from PLL, MUX, Divider, etc and enabling/disabling
the clocks USDHCx/ECSPIx depending on used bus. Moreover, it is agnostic
to the alias numbering as the information about the clock is read from the
device tree.

One needs to pay attention to the comments indicating necessary for U-Boot's
driver model changes.

If needed, the code can be extended to support the "set" part of the clock
management.

Signed-off-by: Lukasz Majewski <lukma@denx.de>

dm: core: Require users of devres to include the header

At present devres.h is included in all files that include dm.h but few
make use of it. Also this pulls in linux/compat which adds several more
headers. Drop the automatic inclusion and require files to include devres
themselves. This provides a good indication of which files use devres.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Anatolij Gustschin <agust@denx.de>

clk: imx: pfd: add set_rate()

Implement set_rate() for pfd.

Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Reviewed-by: Lukasz Majewski <lukma@denx.de>

clk: Port Linux common clock framework [CCF] for imx6q to U-boot (tag: v5.1.12)

This patch brings the files from Linux kernel (linux-stable/linux-5.1.y
SHA1: 5752b50477da)to provide clocks support as it is used on the Linux
kernel with Common Clock Framework [CCF] setup.

The directory structure has been preserved. The ported code only supports
reading information from PLL, MUX, Divider, etc and enabling/disabling
the clocks USDHCx/ECSPIx depending on used bus. Moreover, it is agnostic
to the alias numbering as the information about the clock is read from the
device tree.

One needs to pay attention to the comments indicating necessary for U-Boot's
driver model changes.

If needed, the code can be extended to support the "set" part of the clock
management.

Signed-off-by: Lukasz Majewski <lukma@denx.de>

dm: core: Require users of devres to include the header

At present devres.h is included in all files that include dm.h but few
make use of it. Also this pulls in linux/compat which adds several more
headers. Drop the automatic inclusion and require files to include devres
themselves. This provides a good indication of which files use devres.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Anatolij Gustschin <agust@denx.de>

clk: imx: pfd: add set_rate()

Implement set_rate() for pfd.

Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Reviewed-by: Lukasz Majewski <lukma@denx.de>

clk: Port Linux common clock framework [CCF] for imx6q to U-boot (tag: v5.1.12)

This patch brings the files from Linux kernel (linux-stable/linux-5.1.y
SHA1: 5752b50477da)to provide clocks support as it is used on the Linux
kernel with Common Clock Framework [CCF] setup.

The directory structure has been preserved. The ported code only supports
reading information from PLL, MUX, Divider, etc and enabling/disabling
the clocks USDHCx/ECSPIx depending on used bus. Moreover, it is agnostic
to the alias numbering as the information about the clock is read from the
device tree.

One needs to pay attention to the comments indicating necessary for U-Boot's
driver model changes.

If needed, the code can be extended to support the "set" part of the clock
management.

Signed-off-by: Lukasz Majewski <lukma@denx.de>

dm: core: Require users of devres to include the header

At present devres.h is included in all files that include dm.h but few
make use of it. Also this pulls in linux/compat which adds several more
headers. Drop the automatic inclusion and require files to include devres
themselves. This provides a good indication of which files use devres.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Anatolij Gustschin <agust@denx.de>

clk: imx: pfd: add set_rate()

Implement set_rate() for pfd.

Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Reviewed-by: Lukasz Majewski <lukma@denx.de>

clk: Port Linux common clock framework [CCF] for imx6q to U-boot (tag: v5.1.12)

This patch brings the files from Linux kernel (linux-stable/linux-5.1.y
SHA1: 5752b50477da)to provide clocks support as it is used on the Linux
kernel with Common Clock Framework [CCF] setup.

The directory structure has been preserved. The ported code only supports
reading information from PLL, MUX, Divider, etc and enabling/disabling
the clocks USDHCx/ECSPIx depending on used bus. Moreover, it is agnostic
to the alias numbering as the information about the clock is read from the
device tree.

One needs to pay attention to the comments indicating necessary for U-Boot's
driver model changes.

If needed, the code can be extended to support the "set" part of the clock
management.

Signed-off-by: Lukasz Majewski <lukma@denx.de>

dm: core: Require users of devres to include the header

At present devres.h is included in all files that include dm.h but few
make use of it. Also this pulls in linux/compat which adds several more
headers. Drop the automatic inclusion and require files to include devres
themselves. This provides a good indication of which files use devres.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Anatolij Gustschin <agust@denx.de>

clk: imx: pfd: add set_rate()

Implement set_rate() for pfd.

Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Reviewed-by: Lukasz Majewski <lukma@denx.de>

clk: Port Linux common clock framework [CCF] for imx6q to U-boot (tag: v5.1.12)

This patch brings the files from Linux kernel (linux-stable/linux-5.1.y
SHA1: 5752b50477da)to provide clocks support as it is used on the Linux
kernel with Common Clock Framework [CCF] setup.

The directory structure has been preserved. The ported code only supports
reading information from PLL, MUX, Divider, etc and enabling/disabling
the clocks USDHCx/ECSPIx depending on used bus. Moreover, it is agnostic
to the alias numbering as the information about the clock is read from the
device tree.

One needs to pay attention to the comments indicating necessary for U-Boot's
driver model changes.

If needed, the code can be extended to support the "set" part of the clock
management.

Signed-off-by: Lukasz Majewski <lukma@denx.de>

dm: core: Require users of devres to include the header

At present devres.h is included in all files that include dm.h but few
make use of it. Also this pulls in linux/compat which adds several more
headers. Drop the automatic inclusion and require files to include devres
themselves. This provides a good indication of which files use devres.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Anatolij Gustschin <agust@denx.de>

clk: imx: pfd: add set_rate()

Implement set_rate() for pfd.

Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Reviewed-by: Lukasz Majewski <lukma@denx.de>

clk: Port Linux common clock framework [CCF] for imx6q to U-boot (tag: v5.1.12)

This patch brings the files from Linux kernel (linux-stable/linux-5.1.y
SHA1: 5752b50477da)to provide clocks support as it is used on the Linux
kernel with Common Clock Framework [CCF] setup.

The directory structure has been preserved. The ported code only supports
reading information from PLL, MUX, Divider, etc and enabling/disabling
the clocks USDHCx/ECSPIx depending on used bus. Moreover, it is agnostic
to the alias numbering as the information about the clock is read from the
device tree.

One needs to pay attention to the comments indicating necessary for U-Boot's
driver model changes.

If needed, the code can be extended to support the "set" part of the clock
management.

Signed-off-by: Lukasz Majewski <lukma@denx.de>

dm: core: Require users of devres to include the header

At present devres.h is included in all files that include dm.h but few
make use of it. Also this pulls in linux/compat which adds several more
headers. Drop the automatic inclusion and require files to include devres
themselves. This provides a good indication of which files use devres.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Anatolij Gustschin <agust@denx.de>